diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt deleted file mode 100644 index 68e0471..0000000 --- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Broadcom Northstar Thermal - -This binding describes thermal sensor that is part of Northstar's DMU (Device -Management Unit). - -Required properties: -- compatible : Must be "brcm,ns-thermal" -- reg : iomem address range of PVTMON registers -- #thermal-sensor-cells : Should be <0> - -Example: - -thermal: thermal@1800c2c0 { - compatible = "brcm,ns-thermal"; - reg = <0x1800c2c0 0x10>; - #thermal-sensor-cells = <0>; -}; - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - coefficients = <(-556) 418000>; - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <125000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - }; - }; -}; diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml new file mode 100644 index 0000000..fdeb333 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar Thermal + +maintainers: + - Rafał Miłecki + +description: + Thermal sensor that is part of Northstar's DMU (Device Management Unit). + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + const: brcm,ns-thermal + + reg: + description: PVTMON registers range + maxItems: 1 + + "#thermal-sensor-cells": + const: 0 + +unevaluatedProperties: false + +required: + - reg + +examples: + - | + thermal: thermal@1800c2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 95462e0..0242fd9 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -19,9 +19,15 @@ description: | properties: compatible: oneOf: + - description: msm9860 TSENS based + items: + - enum: + - qcom,ipq8064-tsens + - description: v0.1 of TSENS items: - enum: + - qcom,mdm9607-tsens - qcom,msm8916-tsens - qcom,msm8939-tsens - qcom,msm8974-tsens @@ -43,6 +49,7 @@ properties: - qcom,sdm845-tsens - qcom,sm8150-tsens - qcom,sm8250-tsens + - qcom,sm8350-tsens - const: qcom,tsens-v2 reg: @@ -73,7 +80,9 @@ properties: maxItems: 2 items: - const: calib - - const: calib_sel + - enum: + - calib_backup + - calib_sel "#qcom,sensors": description: @@ -88,12 +97,21 @@ properties: Number of cells required to uniquely identify the thermal sensors. Since we have multiple sensors this is set to 1 +required: + - compatible + - interrupts + - interrupt-names + - "#thermal-sensor-cells" + - "#qcom,sensors" + allOf: - if: properties: compatible: contains: enum: + - qcom,ipq8064-tsens + - qcom,mdm9607-tsens - qcom,msm8916-tsens - qcom,msm8974-tsens - qcom,msm8976-tsens @@ -114,19 +132,44 @@ allOf: interrupt-names: minItems: 2 -required: - - compatible - - reg - - "#qcom,sensors" - - interrupts - - interrupt-names - - "#thermal-sensor-cells" + - if: + properties: + compatible: + contains: + enum: + - qcom,tsens-v0_1 + - qcom,tsens-v1 + - qcom,tsens-v2 + + then: + required: + - reg additionalProperties: false examples: - | #include + // Example msm9860 based SoC (ipq8064): + gcc: clock-controller { + + /* ... */ + + tsens: thermal-sensor { + compatible = "qcom,ipq8064-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = ; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + }; + + - | + #include // Example 1 (legacy: for pre v1 IP): tsens1: thermal-sensor@900000 { compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index b33a76e..f963204 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -28,14 +28,7 @@ properties: - renesas,r8a77980-thermal # R-Car V3H - renesas,r8a779a0-thermal # R-Car V3U - reg: - minItems: 2 - maxItems: 4 - items: - - description: TSC1 registers - - description: TSC2 registers - - description: TSC3 registers - - description: TSC4 registers + reg: true interrupts: items: @@ -71,8 +64,25 @@ if: enum: - renesas,r8a779a0-thermal then: + properties: + reg: + minItems: 2 + maxItems: 3 + items: + - description: TSC1 registers + - description: TSC2 registers + - description: TSC3 registers required: - interrupts +else: + properties: + reg: + items: + - description: TSC0 registers + - description: TSC1 registers + - description: TSC2 registers + - description: TSC3 registers + - description: TSC4 registers additionalProperties: false @@ -111,3 +121,20 @@ examples: }; }; }; + - | + #include + #include + #include + + tsc_r8a779a0: thermal@e6190000 { + compatible = "renesas,r8a779a0-thermal"; + reg = <0xe6190000 0x200>, + <0xe6198000 0x200>, + <0xe61a0000 0x200>, + <0xe61a8000 0x200>, + <0xe61b0000 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml index 9f74792..4bd345c 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml @@ -36,6 +36,9 @@ properties: containing several internal sensors. enum: [0, 1] +required: + - "#thermal-sensor-cells" + additionalProperties: true examples: diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst index 29fdd81..4b638c1 100644 --- a/Documentation/driver-api/thermal/sysfs-api.rst +++ b/Documentation/driver-api/thermal/sysfs-api.rst @@ -730,17 +730,7 @@ This function returns the thermal_instance corresponding to a given {thermal_zone, cooling_device, trip_point} combination. Returns NULL if such an instance does not exist. -4.3. thermal_notify_framework ------------------------------ - -This function handles the trip events from sensor drivers. It starts -throttling the cooling devices according to the policy configured. -For CRITICAL and HOT trip points, this notifies the respective drivers, -and does actual throttling for other trip points i.e ACTIVE and PASSIVE. -The throttling policy is based on the configured platform data; if no -platform data is provided, this uses the step_wise throttling policy. - -4.4. thermal_cdev_update +4.3. thermal_cdev_update ------------------------ This function serves as an arbitrator to set the state of a cooling diff --git a/MAINTAINERS b/MAINTAINERS index 303340f..203a569 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15197,6 +15197,7 @@ F: include/linux/if_rmnet.h QUALCOMM TSENS THERMAL DRIVER M: Amit Kucheria +M: Thara Gopinath L: linux-pm@vger.kernel.org L: linux-arm-msm@vger.kernel.org S: Maintained @@ -18101,7 +18102,7 @@ THERMAL/CPU_COOLING M: Amit Daniel Kachhap M: Daniel Lezcano M: Viresh Kumar -M: Javi Merino +R: Lukasz Luba L: linux-pm@vger.kernel.org S: Supported F: Documentation/driver-api/thermal/cpu-cooling-api.rst diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c index 37fb2e1..dfea143 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c @@ -132,7 +132,7 @@ static int mlxsw_get_cooling_device_idx(struct mlxsw_thermal *thermal, /* Allow mlxsw thermal zone binding to an external cooling device */ for (i = 0; i < ARRAY_SIZE(mlxsw_thermal_external_allowed_cdev); i++) { if (strnstr(cdev->type, mlxsw_thermal_external_allowed_cdev[i], - sizeof(cdev->type))) + strlen(cdev->type))) return 0; } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c index 2a7339b..398390c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c @@ -146,8 +146,8 @@ void iwl_mvm_temp_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb) if (mvm->tz_device.tzone) { struct iwl_mvm_thermal_device *tz_dev = &mvm->tz_device; - thermal_notify_framework(tz_dev->tzone, - tz_dev->fw_trips_index[ths_crossed]); + thermal_zone_device_update(tz_dev->tzone, + THERMAL_TRIP_VIOLATED); } #endif /* CONFIG_THERMAL */ } diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c index dffe3ba..e61b91d 100644 --- a/drivers/thermal/amlogic_thermal.c +++ b/drivers/thermal/amlogic_thermal.c @@ -254,10 +254,8 @@ static int amlogic_thermal_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pdata); base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(base)) { - dev_err(dev, "failed to get io address\n"); + if (IS_ERR(base)) return PTR_ERR(base); - } pdata->regmap = devm_regmap_init_mmio(dev, base, pdata->data->regmap_config); diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c index 3199977..c8e4344 100644 --- a/drivers/thermal/broadcom/bcm2835_thermal.c +++ b/drivers/thermal/broadcom/bcm2835_thermal.c @@ -184,7 +184,6 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) data->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(data->regs)) { err = PTR_ERR(data->regs); - dev_err(&pdev->dev, "Could not get registers: %d\n", err); return err; } diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c index 10af334..eeb4e4b 100644 --- a/drivers/thermal/cpufreq_cooling.c +++ b/drivers/thermal/cpufreq_cooling.c @@ -13,10 +13,10 @@ #include #include #include +#include #include #include #include -#include #include #include #include @@ -50,8 +50,6 @@ struct time_in_idle { /** * struct cpufreq_cooling_device - data for cooling device with cpufreq - * @id: unique integer value corresponding to each cpufreq_cooling_device - * registered. * @last_load: load measured by the latest call to cpufreq_get_requested_power() * @cpufreq_state: integer value representing the current state of cpufreq * cooling devices. @@ -61,7 +59,6 @@ struct time_in_idle { * @cdev: thermal_cooling_device pointer to keep track of the * registered cooling device. * @policy: cpufreq policy. - * @node: list_head to link all cpufreq_cooling_device together. * @idle_time: idle time stats * @qos_req: PM QoS contraint to apply * @@ -69,23 +66,17 @@ struct time_in_idle { * cpufreq_cooling_device. */ struct cpufreq_cooling_device { - int id; u32 last_load; unsigned int cpufreq_state; unsigned int max_level; struct em_perf_domain *em; struct cpufreq_policy *policy; - struct list_head node; #ifndef CONFIG_SMP struct time_in_idle *idle_time; #endif struct freq_qos_request qos_req; }; -static DEFINE_IDA(cpufreq_ida); -static DEFINE_MUTEX(cooling_list_lock); -static LIST_HEAD(cpufreq_cdev_list); - #ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR /** * get_level: Find the level for a particular frequency @@ -125,7 +116,7 @@ static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_cdev, { int i; - for (i = cpufreq_cdev->max_level; i >= 0; i--) { + for (i = cpufreq_cdev->max_level; i > 0; i--) { if (power >= cpufreq_cdev->em->table[i].power) break; } @@ -528,11 +519,11 @@ __cpufreq_cooling_register(struct device_node *np, { struct thermal_cooling_device *cdev; struct cpufreq_cooling_device *cpufreq_cdev; - char dev_name[THERMAL_NAME_LENGTH]; unsigned int i; struct device *dev; int ret; struct thermal_cooling_device_ops *cooling_ops; + char *name; dev = get_cpu_device(policy->cpu); if (unlikely(!dev)) { @@ -567,16 +558,6 @@ __cpufreq_cooling_register(struct device_node *np, /* max_level is an index, not a counter */ cpufreq_cdev->max_level = i - 1; - ret = ida_simple_get(&cpufreq_ida, 0, 0, GFP_KERNEL); - if (ret < 0) { - cdev = ERR_PTR(ret); - goto free_idle_time; - } - cpufreq_cdev->id = ret; - - snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", - cpufreq_cdev->id); - cooling_ops = &cpufreq_cooling_ops; #ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR @@ -591,7 +572,7 @@ __cpufreq_cooling_register(struct device_node *np, pr_err("%s: unsorted frequency tables are not supported\n", __func__); cdev = ERR_PTR(-EINVAL); - goto remove_ida; + goto free_idle_time; } ret = freq_qos_add_request(&policy->constraints, @@ -601,24 +582,25 @@ __cpufreq_cooling_register(struct device_node *np, pr_err("%s: Failed to add freq constraint (%d)\n", __func__, ret); cdev = ERR_PTR(ret); - goto remove_ida; + goto free_idle_time; } - cdev = thermal_of_cooling_device_register(np, dev_name, cpufreq_cdev, + cdev = ERR_PTR(-ENOMEM); + name = kasprintf(GFP_KERNEL, "cpufreq-%s", dev_name(dev)); + if (!name) + goto remove_qos_req; + + cdev = thermal_of_cooling_device_register(np, name, cpufreq_cdev, cooling_ops); + kfree(name); + if (IS_ERR(cdev)) goto remove_qos_req; - mutex_lock(&cooling_list_lock); - list_add(&cpufreq_cdev->node, &cpufreq_cdev_list); - mutex_unlock(&cooling_list_lock); - return cdev; remove_qos_req: freq_qos_remove_request(&cpufreq_cdev->qos_req); -remove_ida: - ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id); free_idle_time: free_idle_time(cpufreq_cdev); free_cdev: @@ -706,13 +688,8 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) cpufreq_cdev = cdev->devdata; - mutex_lock(&cooling_list_lock); - list_del(&cpufreq_cdev->node); - mutex_unlock(&cooling_list_lock); - thermal_cooling_device_unregister(cdev); freq_qos_remove_request(&cpufreq_cdev->qos_req); - ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id); free_idle_time(cpufreq_cdev); kfree(cpufreq_cdev); } diff --git a/drivers/thermal/cpuidle_cooling.c b/drivers/thermal/cpuidle_cooling.c index 7ecab4b..4f41102 100644 --- a/drivers/thermal/cpuidle_cooling.c +++ b/drivers/thermal/cpuidle_cooling.c @@ -9,9 +9,9 @@ #include #include +#include #include #include -#include #include #include #include @@ -26,8 +26,6 @@ struct cpuidle_cooling_device { unsigned long state; }; -static DEFINE_IDA(cpuidle_ida); - /** * cpuidle_cooling_runtime - Running time computation * @idle_duration_us: CPU idle time to inject in microseconds @@ -174,10 +172,11 @@ static int __cpuidle_cooling_register(struct device_node *np, struct idle_inject_device *ii_dev; struct cpuidle_cooling_device *idle_cdev; struct thermal_cooling_device *cdev; + struct device *dev; unsigned int idle_duration_us = TICK_USEC; unsigned int latency_us = UINT_MAX; - char dev_name[THERMAL_NAME_LENGTH]; - int id, ret; + char *name; + int ret; idle_cdev = kzalloc(sizeof(*idle_cdev), GFP_KERNEL); if (!idle_cdev) { @@ -185,16 +184,10 @@ static int __cpuidle_cooling_register(struct device_node *np, goto out; } - id = ida_simple_get(&cpuidle_ida, 0, 0, GFP_KERNEL); - if (id < 0) { - ret = id; - goto out_kfree; - } - ii_dev = idle_inject_register(drv->cpumask); if (!ii_dev) { ret = -EINVAL; - goto out_id; + goto out_kfree; } of_property_read_u32(np, "duration-us", &idle_duration_us); @@ -205,24 +198,32 @@ static int __cpuidle_cooling_register(struct device_node *np, idle_cdev->ii_dev = ii_dev; - snprintf(dev_name, sizeof(dev_name), "thermal-idle-%d", id); + dev = get_cpu_device(cpumask_first(drv->cpumask)); - cdev = thermal_of_cooling_device_register(np, dev_name, idle_cdev, + name = kasprintf(GFP_KERNEL, "idle-%s", dev_name(dev)); + if (!name) { + ret = -ENOMEM; + goto out_unregister; + } + + cdev = thermal_of_cooling_device_register(np, name, idle_cdev, &cpuidle_cooling_ops); if (IS_ERR(cdev)) { ret = PTR_ERR(cdev); - goto out_unregister; + goto out_kfree_name; } pr_debug("%s: Idle injection set with idle duration=%u, latency=%u\n", - dev_name, idle_duration_us, latency_us); + name, idle_duration_us, latency_us); + + kfree(name); return 0; +out_kfree_name: + kfree(name); out_unregister: idle_inject_unregister(ii_dev); -out_id: - ida_simple_remove(&cpuidle_ida, id); out_kfree: kfree(idle_cdev); out: diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c index fed3121..3a788ac 100644 --- a/drivers/thermal/devfreq_cooling.c +++ b/drivers/thermal/devfreq_cooling.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -25,11 +24,8 @@ #define HZ_PER_KHZ 1000 #define SCALE_ERROR_MITIGATION 100 -static DEFINE_IDA(devfreq_ida); - /** * struct devfreq_cooling_device - Devfreq cooling device - * @id: unique integer value corresponding to each * devfreq_cooling_device registered. * @cdev: Pointer to associated thermal cooling device. * @devfreq: Pointer to associated devfreq device. @@ -51,7 +47,6 @@ static DEFINE_IDA(devfreq_ida); * @em_pd: Energy Model for the associated Devfreq device */ struct devfreq_cooling_device { - int id; struct thermal_cooling_device *cdev; struct devfreq *devfreq; unsigned long cooling_state; @@ -363,7 +358,7 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df, struct thermal_cooling_device *cdev; struct device *dev = df->dev.parent; struct devfreq_cooling_device *dfc; - char dev_name[THERMAL_NAME_LENGTH]; + char *name; int err, num_opps; dfc = kzalloc(sizeof(*dfc), GFP_KERNEL); @@ -407,30 +402,27 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df, if (err < 0) goto free_table; - err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL); - if (err < 0) + err = -ENOMEM; + name = kasprintf(GFP_KERNEL, "devfreq-%s", dev_name(dev)); + if (!name) goto remove_qos_req; - dfc->id = err; - - snprintf(dev_name, sizeof(dev_name), "thermal-devfreq-%d", dfc->id); - - cdev = thermal_of_cooling_device_register(np, dev_name, dfc, + cdev = thermal_of_cooling_device_register(np, name, dfc, &devfreq_cooling_ops); + kfree(name); + if (IS_ERR(cdev)) { err = PTR_ERR(cdev); dev_err(dev, "Failed to register devfreq cooling device (%d)\n", err); - goto release_ida; + goto remove_qos_req; } dfc->cdev = cdev; return cdev; -release_ida: - ida_simple_remove(&devfreq_ida, dfc->id); remove_qos_req: dev_pm_qos_remove_request(&dfc->req_max_freq); free_table: @@ -527,7 +519,6 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *cdev) dev = dfc->devfreq->dev.parent; thermal_cooling_device_unregister(dfc->cdev); - ida_simple_remove(&devfreq_ida, dfc->id); dev_pm_qos_remove_request(&dfc->req_max_freq); em_dev_unregister_perf_domain(dev); diff --git a/drivers/thermal/gov_fair_share.c b/drivers/thermal/gov_fair_share.c index aaa0718..1e5abf4 100644 --- a/drivers/thermal/gov_fair_share.c +++ b/drivers/thermal/gov_fair_share.c @@ -82,6 +82,8 @@ static int fair_share_throttle(struct thermal_zone_device *tz, int trip) int total_instance = 0; int cur_trip_level = get_trip_level(tz); + mutex_lock(&tz->lock); + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if (instance->trip != trip) continue; @@ -105,11 +107,12 @@ static int fair_share_throttle(struct thermal_zone_device *tz, int trip) instance->target = get_target_state(tz, cdev, percentage, cur_trip_level); - mutex_lock(&instance->cdev->lock); - instance->cdev->updated = false; - mutex_unlock(&instance->cdev->lock); - thermal_cdev_update(cdev); + mutex_lock(&cdev->lock); + __thermal_cdev_update(cdev); + mutex_unlock(&cdev->lock); } + + mutex_unlock(&tz->lock); return 0; } diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c index 92acae5..13e3757 100644 --- a/drivers/thermal/gov_power_allocator.c +++ b/drivers/thermal/gov_power_allocator.c @@ -301,9 +301,8 @@ power_actor_set_power(struct thermal_cooling_device *cdev, instance->target = clamp_val(state, instance->lower, instance->upper); mutex_lock(&cdev->lock); - cdev->updated = false; + __thermal_cdev_update(cdev); mutex_unlock(&cdev->lock); - thermal_cdev_update(cdev); return 0; } @@ -374,9 +373,11 @@ static void divvy_up_power(u32 *req_power, u32 *max_power, int num_actors, */ extra_power = min(extra_power, capped_extra_power); if (capped_extra_power > 0) - for (i = 0; i < num_actors; i++) - granted_power[i] += (extra_actor_power[i] * - extra_power) / capped_extra_power; + for (i = 0; i < num_actors; i++) { + u64 extra_range = (u64)extra_actor_power[i] * extra_power; + granted_power[i] += DIV_ROUND_CLOSEST_ULL(extra_range, + capped_extra_power); + } } static int allocate_power(struct thermal_zone_device *tz, @@ -569,22 +570,33 @@ static void reset_pid_controller(struct power_allocator_params *params) params->prev_err = 0; } -static void allow_maximum_power(struct thermal_zone_device *tz) +static void allow_maximum_power(struct thermal_zone_device *tz, bool update) { struct thermal_instance *instance; struct power_allocator_params *params = tz->governor_data; + u32 req_power; mutex_lock(&tz->lock); list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + struct thermal_cooling_device *cdev = instance->cdev; + if ((instance->trip != params->trip_max_desired_temperature) || (!cdev_is_power_actor(instance->cdev))) continue; instance->target = 0; mutex_lock(&instance->cdev->lock); - instance->cdev->updated = false; + /* + * Call for updating the cooling devices local stats and avoid + * periods of dozen of seconds when those have not been + * maintained. + */ + cdev->ops->get_requested_power(cdev, &req_power); + + if (update) + __thermal_cdev_update(instance->cdev); + mutex_unlock(&instance->cdev->lock); - thermal_cdev_update(instance->cdev); } mutex_unlock(&tz->lock); } @@ -698,6 +710,7 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) int ret; int switch_on_temp, control_temp; struct power_allocator_params *params = tz->governor_data; + bool update; /* * We get called for every trip point but we only need to do @@ -709,9 +722,10 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) ret = tz->ops->get_trip_temp(tz, params->trip_switch_on, &switch_on_temp); if (!ret && (tz->temperature < switch_on_temp)) { + update = (tz->last_temperature >= switch_on_temp); tz->passive = 0; reset_pid_controller(params); - allow_maximum_power(tz); + allow_maximum_power(tz, update); return 0; } diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index ee05950..9a21ac0 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -1,7 +1,7 @@ /* - * Hisilicon thermal sensor driver + * HiSilicon thermal sensor driver * - * Copyright (c) 2014-2015 Hisilicon Limited. + * Copyright (c) 2014-2015 HiSilicon Limited. * Copyright (c) 2014-2015 Linaro Limited. * * Xinwei Kong @@ -572,10 +572,8 @@ static int hisi_thermal_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); data->regs = devm_ioremap_resource(dev, res); - if (IS_ERR(data->regs)) { - dev_err(dev, "failed to get io address\n"); + if (IS_ERR(data->regs)) return PTR_ERR(data->regs); - } ret = data->ops->probe(data); if (ret) @@ -672,5 +670,5 @@ module_platform_driver(hisi_thermal_driver); MODULE_AUTHOR("Xinwei Kong "); MODULE_AUTHOR("Leo Yan "); -MODULE_DESCRIPTION("Hisilicon thermal driver"); +MODULE_DESCRIPTION("HiSilicon thermal driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig index ce4f592..e4299ca 100644 --- a/drivers/thermal/intel/Kconfig +++ b/drivers/thermal/intel/Kconfig @@ -79,3 +79,14 @@ config INTEL_PCH_THERMAL Enable this to support thermal reporting on certain intel PCHs. Thermal reporting device will provide temperature reading, programmable trip points and other information. + +config INTEL_TCC_COOLING + tristate "Intel TCC offset cooling Driver" + depends on X86 + help + Enable this to support system cooling by adjusting the effective TCC + activation temperature via the TCC Offset register, which is widely + supported on modern Intel platforms. + Note that, on different platforms, the behavior might be different + on how fast the setting takes effect, and how much the CPU frequency + is reduced. diff --git a/drivers/thermal/intel/Makefile b/drivers/thermal/intel/Makefile index ff2ad30..5ff2afa 100644 --- a/drivers/thermal/intel/Makefile +++ b/drivers/thermal/intel/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o +obj-$(CONFIG_INTEL_TCC_COOLING) += intel_tcc_cooling.o obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o diff --git a/drivers/thermal/intel/intel_tcc_cooling.c b/drivers/thermal/intel/intel_tcc_cooling.c new file mode 100644 index 0000000..8ec10d5 --- /dev/null +++ b/drivers/thermal/intel/intel_tcc_cooling.c @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * cooling device driver that activates the processor throttling by + * programming the TCC Offset register. + * Copyright (c) 2021, Intel Corporation. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include + +#define TCC_SHIFT 24 +#define TCC_MASK (0x3fULL<<24) +#define TCC_PROGRAMMABLE BIT(30) + +static struct thermal_cooling_device *tcc_cdev; + +static int tcc_get_max_state(struct thermal_cooling_device *cdev, unsigned long + *state) +{ + *state = TCC_MASK >> TCC_SHIFT; + return 0; +} + +static int tcc_offset_update(int tcc) +{ + u64 val; + int err; + + err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val); + if (err) + return err; + + val &= ~TCC_MASK; + val |= tcc << TCC_SHIFT; + + err = wrmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, val); + if (err) + return err; + + return 0; +} + +static int tcc_get_cur_state(struct thermal_cooling_device *cdev, unsigned long + *state) +{ + u64 val; + int err; + + err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val); + if (err) + return err; + + *state = (val & TCC_MASK) >> TCC_SHIFT; + return 0; +} + +static int tcc_set_cur_state(struct thermal_cooling_device *cdev, unsigned long + state) +{ + return tcc_offset_update(state); +} + +static const struct thermal_cooling_device_ops tcc_cooling_ops = { + .get_max_state = tcc_get_max_state, + .get_cur_state = tcc_get_cur_state, + .set_cur_state = tcc_set_cur_state, +}; + +static const struct x86_cpu_id tcc_ids[] __initconst = { + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, NULL), + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, NULL), + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, NULL), + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, NULL), + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE, NULL), + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, NULL), + X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE, NULL), + X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L, NULL), + X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE, NULL), + {} +}; + +MODULE_DEVICE_TABLE(x86cpu, tcc_ids); + +static int __init tcc_cooling_init(void) +{ + int ret; + u64 val; + const struct x86_cpu_id *id; + + int err; + + id = x86_match_cpu(tcc_ids); + if (!id) + return -ENODEV; + + err = rdmsrl_safe(MSR_PLATFORM_INFO, &val); + if (err) + return err; + + if (!(val & TCC_PROGRAMMABLE)) + return -ENODEV; + + pr_info("Programmable TCC Offset detected\n"); + + tcc_cdev = + thermal_cooling_device_register("TCC Offset", NULL, + &tcc_cooling_ops); + if (IS_ERR(tcc_cdev)) { + ret = PTR_ERR(tcc_cdev); + return ret; + } + return 0; +} + +module_init(tcc_cooling_init) + +static void __exit tcc_cooling_exit(void) +{ + thermal_cooling_device_unregister(tcc_cdev); +} + +module_exit(tcc_cooling_exit) + +MODULE_DESCRIPTION("TCC offset cooling device Driver"); +MODULE_AUTHOR("Zhang Rui "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 149c6d7..97e8678 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -573,12 +573,12 @@ static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw) static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw) { - s32 format_1 = 0; - s32 format_2 = 0; - s32 g_oe = 1; - s32 g_gain = 1; - s32 g_x_roomt = 0; - s32 tmp = 0; + s32 format_1; + s32 format_2; + s32 g_oe; + s32 g_gain; + s32 g_x_roomt; + s32 tmp; if (raw == 0) return 0; diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c index 6dc879f..7419e19 100644 --- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c @@ -17,6 +17,7 @@ #include "../thermal_core.h" +#define QPNP_TM_REG_DIG_MAJOR 0x01 #define QPNP_TM_REG_TYPE 0x04 #define QPNP_TM_REG_SUBTYPE 0x05 #define QPNP_TM_REG_STATUS 0x08 @@ -38,26 +39,30 @@ #define ALARM_CTRL_FORCE_ENABLE BIT(7) -/* - * Trip point values based on threshold control - * 0 = {105 C, 125 C, 145 C} - * 1 = {110 C, 130 C, 150 C} - * 2 = {115 C, 135 C, 155 C} - * 3 = {120 C, 140 C, 160 C} -*/ -#define TEMP_STAGE_STEP 20000 /* Stage step: 20.000 C */ -#define TEMP_STAGE_HYSTERESIS 2000 +#define THRESH_COUNT 4 +#define STAGE_COUNT 3 + +/* Over-temperature trip point values in mC */ +static const long temp_map_gen1[THRESH_COUNT][STAGE_COUNT] = { + { 105000, 125000, 145000 }, + { 110000, 130000, 150000 }, + { 115000, 135000, 155000 }, + { 120000, 140000, 160000 }, +}; + +static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = { + { 90000, 110000, 140000 }, + { 95000, 115000, 145000 }, + { 100000, 120000, 150000 }, + { 105000, 125000, 155000 }, +}; -#define TEMP_THRESH_MIN 105000 /* Threshold Min: 105 C */ -#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */ +#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */ #define THRESH_MIN 0 #define THRESH_MAX 3 -/* Stage 2 Threshold Min: 125 C */ -#define STAGE2_THRESHOLD_MIN 125000 -/* Stage 2 Threshold Max: 140 C */ -#define STAGE2_THRESHOLD_MAX 140000 +#define TEMP_STAGE_HYSTERESIS 2000 /* Temperature in Milli Celsius reported during stage 0 if no ADC is present */ #define DEFAULT_TEMP 37000 @@ -77,6 +82,7 @@ struct qpnp_tm_chip { bool initialized; struct iio_channel *adc; + const long (*temp_map)[THRESH_COUNT][STAGE_COUNT]; }; /* This array maps from GEN2 alarm state to GEN1 alarm stage */ @@ -101,6 +107,23 @@ static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data) } /** + * qpnp_tm_decode_temp() - return temperature in mC corresponding to the + * specified over-temperature stage + * @chip: Pointer to the qpnp_tm chip + * @stage: Over-temperature stage + * + * Return: temperature in mC + */ +static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage) +{ + if (!chip->temp_map || chip->thresh >= THRESH_COUNT || stage == 0 || + stage > STAGE_COUNT) + return 0; + + return (*chip->temp_map)[chip->thresh][stage - 1]; +} + +/** * qpnp_tm_get_temp_stage() - return over-temperature stage * @chip: Pointer to the qpnp_tm chip * @@ -149,14 +172,12 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip) if (stage_new > stage_old) { /* increasing stage, use lower bound */ - chip->temp = (stage_new - 1) * TEMP_STAGE_STEP + - chip->thresh * TEMP_THRESH_STEP + - TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; + chip->temp = qpnp_tm_decode_temp(chip, stage_new) + + TEMP_STAGE_HYSTERESIS; } else if (stage_new < stage_old) { /* decreasing stage, use upper bound */ - chip->temp = stage_new * TEMP_STAGE_STEP + - chip->thresh * TEMP_THRESH_STEP - - TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; + chip->temp = qpnp_tm_decode_temp(chip, stage_new + 1) + - TEMP_STAGE_HYSTERESIS; } chip->stage = stage; @@ -199,26 +220,28 @@ static int qpnp_tm_get_temp(void *data, int *temp) static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip, int temp) { - u8 reg; + long stage2_threshold_min = (*chip->temp_map)[THRESH_MIN][1]; + long stage2_threshold_max = (*chip->temp_map)[THRESH_MAX][1]; bool disable_s2_shutdown = false; + u8 reg; WARN_ON(!mutex_is_locked(&chip->lock)); /* * Default: S2 and S3 shutdown enabled, thresholds at - * 105C/125C/145C, monitoring at 25Hz + * lowest threshold set, monitoring at 25Hz */ reg = SHUTDOWN_CTRL1_RATE_25HZ; if (temp == THERMAL_TEMP_INVALID || - temp < STAGE2_THRESHOLD_MIN) { + temp < stage2_threshold_min) { chip->thresh = THRESH_MIN; goto skip; } - if (temp <= STAGE2_THRESHOLD_MAX) { + if (temp <= stage2_threshold_max) { chip->thresh = THRESH_MAX - - ((STAGE2_THRESHOLD_MAX - temp) / + ((stage2_threshold_max - temp) / TEMP_THRESH_STEP); disable_s2_shutdown = true; } else { @@ -326,9 +349,7 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip) ? chip->stage : alarm_state_map[chip->stage]; if (stage) - chip->temp = chip->thresh * TEMP_THRESH_STEP + - (stage - 1) * TEMP_STAGE_STEP + - TEMP_THRESH_MIN; + chip->temp = qpnp_tm_decode_temp(chip, stage); crit_temp = qpnp_tm_get_critical_trip_temp(chip); ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp); @@ -350,7 +371,7 @@ static int qpnp_tm_probe(struct platform_device *pdev) { struct qpnp_tm_chip *chip; struct device_node *node; - u8 type, subtype; + u8 type, subtype, dig_major; u32 res; int ret, irq; @@ -400,6 +421,12 @@ static int qpnp_tm_probe(struct platform_device *pdev) return ret; } + ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major); + if (ret < 0) { + dev_err(&pdev->dev, "could not read dig_major\n"); + return ret; + } + if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1 && subtype != QPNP_TM_SUBTYPE_GEN2)) { dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n", @@ -408,6 +435,10 @@ static int qpnp_tm_probe(struct platform_device *pdev) } chip->subtype = subtype; + if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1) + chip->temp_map = &temp_map_gen2_v1; + else + chip->temp_map = &temp_map_gen1; /* * Register the sensor before initializing the hardware to be able to diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c index 2a28a5a..67c1748 100644 --- a/drivers/thermal/qcom/tsens-8960.c +++ b/drivers/thermal/qcom/tsens-8960.c @@ -10,8 +10,6 @@ #include #include "tsens.h" -#define CAL_MDEGC 30000 - #define CONFIG_ADDR 0x3640 #define CONFIG_ADDR_8660 0x3620 /* CONFIG_ADDR bitmasks */ @@ -21,40 +19,38 @@ #define CONFIG_SHIFT_8660 28 #define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660) -#define STATUS_CNTL_ADDR_8064 0x3660 #define CNTL_ADDR 0x3620 /* CNTL_ADDR bitmasks */ #define EN BIT(0) #define SW_RST BIT(1) -#define SENSOR0_EN BIT(3) + +#define MEASURE_PERIOD BIT(18) #define SLP_CLK_ENA BIT(26) #define SLP_CLK_ENA_8660 BIT(24) -#define MEASURE_PERIOD 1 #define SENSOR0_SHIFT 3 -/* INT_STATUS_ADDR bitmasks */ -#define MIN_STATUS_MASK BIT(0) -#define LOWER_STATUS_CLR BIT(1) -#define UPPER_STATUS_CLR BIT(2) -#define MAX_STATUS_MASK BIT(3) - #define THRESHOLD_ADDR 0x3624 -/* THRESHOLD_ADDR bitmasks */ -#define THRESHOLD_MAX_LIMIT_SHIFT 24 -#define THRESHOLD_MIN_LIMIT_SHIFT 16 -#define THRESHOLD_UPPER_LIMIT_SHIFT 8 -#define THRESHOLD_LOWER_LIMIT_SHIFT 0 - -/* Initial temperature threshold values */ -#define LOWER_LIMIT_TH 0x50 -#define UPPER_LIMIT_TH 0xdf -#define MIN_LIMIT_TH 0x0 -#define MAX_LIMIT_TH 0xff - -#define S0_STATUS_ADDR 0x3628 + #define INT_STATUS_ADDR 0x363c -#define TRDY_MASK BIT(7) -#define TIMEOUT_US 100 + +#define S0_STATUS_OFF 0x3628 +#define S1_STATUS_OFF 0x362c +#define S2_STATUS_OFF 0x3630 +#define S3_STATUS_OFF 0x3634 +#define S4_STATUS_OFF 0x3638 +#define S5_STATUS_OFF 0x3664 /* Sensors 5-10 found on apq8064/msm8960 */ +#define S6_STATUS_OFF 0x3668 +#define S7_STATUS_OFF 0x366c +#define S8_STATUS_OFF 0x3670 +#define S9_STATUS_OFF 0x3674 +#define S10_STATUS_OFF 0x3678 + +/* Original slope - 350 to compensate mC to C inaccuracy */ +static u32 tsens_msm8960_slope[] = { + 826, 826, 804, 826, + 761, 782, 782, 849, + 782, 849, 782 + }; static int suspend_8960(struct tsens_priv *priv) { @@ -115,17 +111,34 @@ static int resume_8960(struct tsens_priv *priv) static int enable_8960(struct tsens_priv *priv, int id) { int ret; - u32 reg, mask; + u32 reg, mask = BIT(id); ret = regmap_read(priv->tm_map, CNTL_ADDR, ®); if (ret) return ret; - mask = BIT(id + SENSOR0_SHIFT); + /* HARDWARE BUG: + * On platforms with more than 6 sensors, all remaining sensors + * must be enabled together, otherwise undefined results are expected. + * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver, + * all the sensors are enabled in one step hence this bug is not + * triggered. + */ + if (id > 5) + mask = GENMASK(10, 6); + + mask <<= SENSOR0_SHIFT; + + /* Sensors already enabled. Skip. */ + if ((reg & mask) == mask) + return 0; + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST); if (ret) return ret; + reg |= MEASURE_PERIOD; + if (priv->num_sensors > 1) reg |= mask | SLP_CLK_ENA | EN; else @@ -162,63 +175,11 @@ static void disable_8960(struct tsens_priv *priv) regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); } -static int init_8960(struct tsens_priv *priv) -{ - int ret, i; - u32 reg_cntl; - - priv->tm_map = dev_get_regmap(priv->dev, NULL); - if (!priv->tm_map) - return -ENODEV; - - /* - * The status registers for each sensor are discontiguous - * because some SoCs have 5 sensors while others have more - * but the control registers stay in the same place, i.e - * directly after the first 5 status registers. - */ - for (i = 0; i < priv->num_sensors; i++) { - if (i >= 5) - priv->sensor[i].status = S0_STATUS_ADDR + 40; - priv->sensor[i].status += i * 4; - } - - reg_cntl = SW_RST; - ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl); - if (ret) - return ret; - - if (priv->num_sensors > 1) { - reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); - reg_cntl &= ~SW_RST; - ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR, - CONFIG_MASK, CONFIG); - } else { - reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16); - reg_cntl &= ~CONFIG_MASK_8660; - reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660; - } - - reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT; - ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); - if (ret) - return ret; - - reg_cntl |= EN; - ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); - if (ret) - return ret; - - return 0; -} - static int calibrate_8960(struct tsens_priv *priv) { int i; char *data; - - ssize_t num_read = priv->num_sensors; - struct tsens_sensor *s = priv->sensor; + u32 p1[11]; data = qfprom_read(priv->dev, "calib"); if (IS_ERR(data)) @@ -226,60 +187,96 @@ static int calibrate_8960(struct tsens_priv *priv) if (IS_ERR(data)) return PTR_ERR(data); - for (i = 0; i < num_read; i++, s++) - s->offset = data[i]; + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = data[i]; + priv->sensor[i].slope = tsens_msm8960_slope[i]; + } + + compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB); kfree(data); return 0; } -/* Temperature on y axis and ADC-code on x-axis */ -static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s) -{ - int slope, offset; - - slope = thermal_zone_get_slope(s->tzd); - offset = CAL_MDEGC - slope * s->offset; - - return adc_code * slope + offset; -} - -static int get_temp_8960(const struct tsens_sensor *s, int *temp) -{ - int ret; - u32 code, trdy; - struct tsens_priv *priv = s->priv; - unsigned long timeout; - - timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); - do { - ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy); - if (ret) - return ret; - if (!(trdy & TRDY_MASK)) - continue; - ret = regmap_read(priv->tm_map, s->status, &code); - if (ret) - return ret; - *temp = code_to_mdegC(code, s); - return 0; - } while (time_before(jiffies, timeout)); - - return -ETIMEDOUT; -} +static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* No VERSION information */ + + /* CNTL */ + [TSENS_EN] = REG_FIELD(CNTL_ADDR, 0, 0), + [TSENS_SW_RST] = REG_FIELD(CNTL_ADDR, 1, 1), + /* 8960 has 5 sensors, 8660 has 11, we only handle 5 */ + [SENSOR_EN] = REG_FIELD(CNTL_ADDR, 3, 7), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + /* NO INTERRUPT ENABLE */ + + /* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */ + [LOW_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 0, 7), + [UP_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 8, 15), + /* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield + * Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp + * MIN_THRESH_0 -> CRIT_THRESH_1 + * MAX_THRESH_0 -> CRIT_THRESH_0 + */ + [CRIT_THRESH_1] = REG_FIELD(THRESHOLD_ADDR, 16, 23), + [CRIT_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 24, 31), + + /* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */ + /* 1 == clear, 0 == normal operation */ + [LOW_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 9, 9), + [UP_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 10, 10), + + /* NO CRITICAL INTERRUPT SUPPORT on 8960 */ + + /* Sn_STATUS */ + [LAST_TEMP_0] = REG_FIELD(S0_STATUS_OFF, 0, 7), + [LAST_TEMP_1] = REG_FIELD(S1_STATUS_OFF, 0, 7), + [LAST_TEMP_2] = REG_FIELD(S2_STATUS_OFF, 0, 7), + [LAST_TEMP_3] = REG_FIELD(S3_STATUS_OFF, 0, 7), + [LAST_TEMP_4] = REG_FIELD(S4_STATUS_OFF, 0, 7), + [LAST_TEMP_5] = REG_FIELD(S5_STATUS_OFF, 0, 7), + [LAST_TEMP_6] = REG_FIELD(S6_STATUS_OFF, 0, 7), + [LAST_TEMP_7] = REG_FIELD(S7_STATUS_OFF, 0, 7), + [LAST_TEMP_8] = REG_FIELD(S8_STATUS_OFF, 0, 7), + [LAST_TEMP_9] = REG_FIELD(S9_STATUS_OFF, 0, 7), + [LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0, 7), + + /* No VALID field on 8960 */ + /* TSENS_INT_STATUS bits: 1 == threshold violated */ + [MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0), + [LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1), + [UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2), + /* No CRITICAL field on 8960 */ + [MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7), +}; static const struct tsens_ops ops_8960 = { - .init = init_8960, + .init = init_common, .calibrate = calibrate_8960, - .get_temp = get_temp_8960, + .get_temp = get_temp_common, .enable = enable_8960, .disable = disable_8960, .suspend = suspend_8960, .resume = resume_8960, }; +static struct tsens_features tsens_8960_feat = { + .ver_major = VER_0, + .crit_int = 0, + .adc = 1, + .srot_split = 0, + .max_sensors = 11, +}; + struct tsens_plat_data data_8960 = { .num_sensors = 11, .ops = &ops_8960, + .feat = &tsens_8960_feat, + .fields = tsens_8960_regfields, }; diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c index 4ffa2e2..f136cb3 100644 --- a/drivers/thermal/qcom/tsens-v0_1.c +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -190,6 +190,39 @@ #define BIT_APPEND 0x3 +/* eeprom layout data for mdm9607 */ +#define MDM9607_BASE0_MASK 0x000000ff +#define MDM9607_BASE1_MASK 0x000ff000 +#define MDM9607_BASE0_SHIFT 0 +#define MDM9607_BASE1_SHIFT 12 + +#define MDM9607_S0_P1_MASK 0x00003f00 +#define MDM9607_S1_P1_MASK 0x03f00000 +#define MDM9607_S2_P1_MASK 0x0000003f +#define MDM9607_S3_P1_MASK 0x0003f000 +#define MDM9607_S4_P1_MASK 0x0000003f + +#define MDM9607_S0_P2_MASK 0x000fc000 +#define MDM9607_S1_P2_MASK 0xfc000000 +#define MDM9607_S2_P2_MASK 0x00000fc0 +#define MDM9607_S3_P2_MASK 0x00fc0000 +#define MDM9607_S4_P2_MASK 0x00000fc0 + +#define MDM9607_S0_P1_SHIFT 8 +#define MDM9607_S1_P1_SHIFT 20 +#define MDM9607_S2_P1_SHIFT 0 +#define MDM9607_S3_P1_SHIFT 12 +#define MDM9607_S4_P1_SHIFT 0 + +#define MDM9607_S0_P2_SHIFT 14 +#define MDM9607_S1_P2_SHIFT 26 +#define MDM9607_S2_P2_SHIFT 6 +#define MDM9607_S3_P2_SHIFT 18 +#define MDM9607_S4_P2_SHIFT 6 + +#define MDM9607_CAL_SEL_MASK 0x00700000 +#define MDM9607_CAL_SEL_SHIFT 20 + static int calibrate_8916(struct tsens_priv *priv) { int base0 = 0, base1 = 0, i; @@ -452,7 +485,56 @@ static int calibrate_8974(struct tsens_priv *priv) return 0; } -/* v0.1: 8916, 8939, 8974 */ +static int calibrate_9607(struct tsens_priv *priv) +{ + int base, i; + u32 p1[5], p2[5]; + int mode = 0; + u32 *qfprom_cdata; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + mode = (qfprom_cdata[2] & MDM9607_CAL_SEL_MASK) >> MDM9607_CAL_SEL_SHIFT; + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base = (qfprom_cdata[2] & MDM9607_BASE1_MASK) >> MDM9607_BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & MDM9607_S0_P2_MASK) >> MDM9607_S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & MDM9607_S1_P2_MASK) >> MDM9607_S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & MDM9607_S2_P2_MASK) >> MDM9607_S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & MDM9607_S3_P2_MASK) >> MDM9607_S3_P2_SHIFT; + p2[4] = (qfprom_cdata[2] & MDM9607_S4_P2_MASK) >> MDM9607_S4_P2_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p2[i] = ((base + p2[i]) << 2); + fallthrough; + case ONE_PT_CALIB2: + base = (qfprom_cdata[0] & MDM9607_BASE0_MASK); + p1[0] = (qfprom_cdata[0] & MDM9607_S0_P1_MASK) >> MDM9607_S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & MDM9607_S1_P1_MASK) >> MDM9607_S1_P1_SHIFT; + p1[2] = (qfprom_cdata[1] & MDM9607_S2_P1_MASK) >> MDM9607_S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & MDM9607_S3_P1_MASK) >> MDM9607_S3_P1_SHIFT; + p1[4] = (qfprom_cdata[2] & MDM9607_S4_P1_MASK) >> MDM9607_S4_P1_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p1[i] = ((base + p1[i]) << 2); + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + + return 0; +} + +/* v0.1: 8916, 8939, 8974, 9607 */ static struct tsens_features tsens_v0_1_feat = { .ver_major = VER_0_1, @@ -540,3 +622,17 @@ struct tsens_plat_data data_8974 = { .feat = &tsens_v0_1_feat, .fields = tsens_v0_1_regfields, }; + +static const struct tsens_ops ops_9607 = { + .init = init_common, + .calibrate = calibrate_9607, + .get_temp = get_temp_common, +}; + +struct tsens_plat_data data_9607 = { + .num_sensors = 5, + .ops = &ops_9607, + .hw_ids = (unsigned int []){ 0, 1, 2, 3, 4 }, + .feat = &tsens_v0_1_feat, + .fields = tsens_v0_1_regfields, +}; diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c index 3c19a38..573e261 100644 --- a/drivers/thermal/qcom/tsens-v1.c +++ b/drivers/thermal/qcom/tsens-v1.c @@ -380,11 +380,11 @@ static const struct tsens_ops ops_8976 = { .get_temp = get_temp_tsens_valid, }; -/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */ +/* Valid for both MSM8956 and MSM8976. */ struct tsens_plat_data data_8976 = { .num_sensors = 11, .ops = &ops_8976, - .hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10}, + .hw_ids = (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10}, .feat = &tsens_v1_feat, .fields = tsens_v1_regfields, }; diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index d8ce3a6..4c7ebd1 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -85,7 +86,8 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1, "%s: sensor%d - data_point1:%#x data_point2:%#x\n", __func__, i, p1[i], p2[i]); - priv->sensor[i].slope = SLOPE_DEFAULT; + if (!priv->sensor[i].slope) + priv->sensor[i].slope = SLOPE_DEFAULT; if (mode == TWO_PT_CALIB) { /* * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ @@ -515,6 +517,15 @@ static irqreturn_t tsens_irq_thread(int irq, void *data) dev_dbg(priv->dev, "[%u] %s: no violation: %d\n", hw_id, __func__, temp); } + + if (tsens_version(priv) < VER_0_1) { + /* Constraint: There is only 1 interrupt control register for all + * 11 temperature sensor. So monitoring more than 1 sensor based + * on interrupts will yield inconsistent result. To overcome this + * issue we will monitor only sensor 0 which is the master sensor. + */ + break; + } } return IRQ_HANDLED; @@ -530,6 +541,13 @@ static int tsens_set_trips(void *_sensor, int low, int high) int high_val, low_val, cl_high, cl_low; u32 hw_id = s->hw_id; + if (tsens_version(priv) < VER_0_1) { + /* Pre v0.1 IP had a single register for each type of interrupt + * and thresholds + */ + hw_id = 0; + } + dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", hw_id, __func__, low, high); @@ -584,18 +602,21 @@ int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp) u32 valid; int ret; - ret = regmap_field_read(priv->rf[valid_idx], &valid); - if (ret) - return ret; - while (!valid) { - /* Valid bit is 0 for 6 AHB clock cycles. - * At 19.2MHz, 1 AHB clock is ~60ns. - * We should enter this loop very, very rarely. - */ - ndelay(400); + /* VER_0 doesn't have VALID bit */ + if (tsens_version(priv) >= VER_0_1) { ret = regmap_field_read(priv->rf[valid_idx], &valid); if (ret) return ret; + while (!valid) { + /* Valid bit is 0 for 6 AHB clock cycles. + * At 19.2MHz, 1 AHB clock is ~60ns. + * We should enter this loop very, very rarely. + */ + ndelay(400); + ret = regmap_field_read(priv->rf[valid_idx], &valid); + if (ret) + return ret; + } } /* Valid bit is set, OK to read the temperature */ @@ -608,15 +629,29 @@ int get_temp_common(const struct tsens_sensor *s, int *temp) { struct tsens_priv *priv = s->priv; int hw_id = s->hw_id; - int last_temp = 0, ret; + int last_temp = 0, ret, trdy; + unsigned long timeout; - ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp); - if (ret) - return ret; + timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); + do { + if (tsens_version(priv) == VER_0) { + ret = regmap_field_read(priv->rf[TRDY], &trdy); + if (ret) + return ret; + if (!trdy) + continue; + } - *temp = code_to_degc(last_temp, s) * 1000; + ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp); + if (ret) + return ret; - return 0; + *temp = code_to_degc(last_temp, s) * 1000; + + return 0; + } while (time_before(jiffies, timeout)); + + return -ETIMEDOUT; } #ifdef CONFIG_DEBUG_FS @@ -738,25 +773,42 @@ int __init init_common(struct tsens_priv *priv) priv->tm_offset = 0x1000; } - res = platform_get_resource(op, IORESOURCE_MEM, 0); - tm_base = devm_ioremap_resource(dev, res); - if (IS_ERR(tm_base)) { - ret = PTR_ERR(tm_base); - goto err_put_device; + if (tsens_version(priv) >= VER_0_1) { + res = platform_get_resource(op, IORESOURCE_MEM, 0); + tm_base = devm_ioremap_resource(dev, res); + if (IS_ERR(tm_base)) { + ret = PTR_ERR(tm_base); + goto err_put_device; + } + + priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config); + } else { /* VER_0 share the same gcc regs using a syscon */ + struct device *parent = priv->dev->parent; + + if (parent) + priv->tm_map = syscon_node_to_regmap(parent->of_node); } - priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config); - if (IS_ERR(priv->tm_map)) { - ret = PTR_ERR(priv->tm_map); + if (IS_ERR_OR_NULL(priv->tm_map)) { + if (!priv->tm_map) + ret = -ENODEV; + else + ret = PTR_ERR(priv->tm_map); goto err_put_device; } + /* VER_0 have only tm_map */ + if (!priv->srot_map) + priv->srot_map = priv->tm_map; + if (tsens_version(priv) > VER_0_1) { for (i = VER_MAJOR; i <= VER_STEP; i++) { priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[i]); - if (IS_ERR(priv->rf[i])) - return PTR_ERR(priv->rf[i]); + if (IS_ERR(priv->rf[i])) { + ret = PTR_ERR(priv->rf[i]); + goto err_put_device; + } } ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor); if (ret) @@ -769,6 +821,10 @@ int __init init_common(struct tsens_priv *priv) ret = PTR_ERR(priv->rf[TSENS_EN]); goto err_put_device; } + /* in VER_0 TSENS need to be explicitly enabled */ + if (tsens_version(priv) == VER_0) + regmap_field_write(priv->rf[TSENS_EN], 1); + ret = regmap_field_read(priv->rf[TSENS_EN], &enabled); if (ret) goto err_put_device; @@ -791,6 +847,19 @@ int __init init_common(struct tsens_priv *priv) goto err_put_device; } + priv->rf[TSENS_SW_RST] = + devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_SW_RST]); + if (IS_ERR(priv->rf[TSENS_SW_RST])) { + ret = PTR_ERR(priv->rf[TSENS_SW_RST]); + goto err_put_device; + } + + priv->rf[TRDY] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[TRDY]); + if (IS_ERR(priv->rf[TRDY])) { + ret = PTR_ERR(priv->rf[TRDY]); + goto err_put_device; + } + /* This loop might need changes if enum regfield_ids is reordered */ for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) { for (i = 0; i < priv->feat->max_sensors; i++) { @@ -806,7 +875,7 @@ int __init init_common(struct tsens_priv *priv) } } - if (priv->feat->crit_int) { + if (priv->feat->crit_int || tsens_version(priv) < VER_0_1) { /* Loop might need changes if enum regfield_ids is reordered */ for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) { for (i = 0; i < priv->feat->max_sensors; i++) { @@ -844,7 +913,11 @@ int __init init_common(struct tsens_priv *priv) } spin_lock_init(&priv->ul_lock); - tsens_enable_irq(priv); + + /* VER_0 interrupt doesn't need to be enabled */ + if (tsens_version(priv) >= VER_0_1) + tsens_enable_irq(priv); + tsens_debug_init(op); err_put_device: @@ -895,6 +968,12 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); static const struct of_device_id tsens_table[] = { { + .compatible = "qcom,ipq8064-tsens", + .data = &data_8960, + }, { + .compatible = "qcom,mdm9607-tsens", + .data = &data_9607, + }, { .compatible = "qcom,msm8916-tsens", .data = &data_8916, }, { @@ -943,10 +1022,19 @@ static int tsens_register_irq(struct tsens_priv *priv, char *irqname, if (irq == -ENXIO) ret = 0; } else { - ret = devm_request_threaded_irq(&pdev->dev, irq, - NULL, thread_fn, - IRQF_ONESHOT, - dev_name(&pdev->dev), priv); + /* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT */ + if (tsens_version(priv) == VER_0) + ret = devm_request_threaded_irq(&pdev->dev, irq, + thread_fn, NULL, + IRQF_TRIGGER_RISING, + dev_name(&pdev->dev), + priv); + else + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + thread_fn, IRQF_ONESHOT, + dev_name(&pdev->dev), + priv); + if (ret) dev_err(&pdev->dev, "%s: failed to get irq\n", __func__); @@ -975,6 +1063,19 @@ static int tsens_register(struct tsens_priv *priv) priv->ops->enable(priv, i); } + /* VER_0 require to set MIN and MAX THRESH + * These 2 regs are set using the: + * - CRIT_THRESH_0 for MAX THRESH hardcoded to 120°C + * - CRIT_THRESH_1 for MIN THRESH hardcoded to 0°C + */ + if (tsens_version(priv) < VER_0_1) { + regmap_field_write(priv->rf[CRIT_THRESH_0], + tsens_mC_to_hw(priv->sensor, 120000)); + + regmap_field_write(priv->rf[CRIT_THRESH_1], + tsens_mC_to_hw(priv->sensor, 0)); + } + ret = tsens_register_irq(priv, "uplow", tsens_irq_thread); if (ret < 0) return ret; diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index f40b625..1471a2c 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -13,6 +13,7 @@ #define CAL_DEGC_PT2 120 #define SLOPE_FACTOR 1000 #define SLOPE_DEFAULT 3200 +#define TIMEOUT_US 100 #define THRESHOLD_MAX_ADC_CODE 0x3ff #define THRESHOLD_MIN_ADC_CODE 0x0 @@ -25,7 +26,8 @@ struct tsens_priv; /* IP version numbers in ascending order */ enum tsens_ver { - VER_0_1 = 0, + VER_0 = 0, + VER_0_1, VER_1_X, VER_2_X, }; @@ -585,7 +587,7 @@ int get_temp_common(const struct tsens_sensor *s, int *temp); extern struct tsens_plat_data data_8960; /* TSENS v0.1 targets */ -extern struct tsens_plat_data data_8916, data_8939, data_8974; +extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607; /* TSENS v1 targets */ extern struct tsens_plat_data data_tsens_v1, data_8976; diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index 75c69fe..e1e4123 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -60,7 +60,7 @@ #define MCELSIUS(temp) ((temp) * 1000) #define GEN3_FUSE_MASK 0xFFF -#define TSC_MAX_NUM 4 +#define TSC_MAX_NUM 5 /* default THCODE values if FUSEs are missing */ static const int thcodes[TSC_MAX_NUM][3] = { @@ -68,6 +68,7 @@ static const int thcodes[TSC_MAX_NUM][3] = { { 3393, 2795, 2216 }, { 3389, 2805, 2237 }, { 3415, 2694, 2195 }, + { 3356, 2724, 2244 }, }; /* Structure for thermal temperature calculation */ diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c index 8c80bd0..d9cd23c 100644 --- a/drivers/thermal/sun8i_thermal.c +++ b/drivers/thermal/sun8i_thermal.c @@ -300,7 +300,7 @@ static int sun8i_ths_calibrate(struct ths_device *tmdev) * or 0x8xx, so they won't be away from the default value * for a lot. * - * So here we do not return error if the calibartion data is + * So here we do not return error if the calibration data is * not available, except the probe needs deferring. */ goto out; @@ -418,7 +418,7 @@ static int sun8i_h3_thermal_init(struct ths_device *tmdev) } /* - * Without this undocummented value, the returned temperatures would + * Without this undocumented value, the returned temperatures would * be higher than real ones by about 20C. */ #define SUN50I_H6_CTRL0_UNK 0x0000002f diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c index 66e0639..8e303e9 100644 --- a/drivers/thermal/tegra/soctherm.c +++ b/drivers/thermal/tegra/soctherm.c @@ -2118,7 +2118,6 @@ static int tegra_soctherm_probe(struct platform_device *pdev) struct tegra_soctherm *tegra; struct thermal_zone_device *z; struct tsensor_shared_calib shared_calib; - struct resource *res; struct tegra_soctherm_soc *soc; unsigned int i; int err; @@ -2140,26 +2139,20 @@ static int tegra_soctherm_probe(struct platform_device *pdev) tegra->soc = soc; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "soctherm-reg"); - tegra->regs = devm_ioremap_resource(&pdev->dev, res); + tegra->regs = devm_platform_ioremap_resource_byname(pdev, "soctherm-reg"); if (IS_ERR(tegra->regs)) { dev_err(&pdev->dev, "can't get soctherm registers"); return PTR_ERR(tegra->regs); } if (!tegra->soc->use_ccroc) { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "car-reg"); - tegra->clk_regs = devm_ioremap_resource(&pdev->dev, res); + tegra->clk_regs = devm_platform_ioremap_resource_byname(pdev, "car-reg"); if (IS_ERR(tegra->clk_regs)) { dev_err(&pdev->dev, "can't get car clk registers"); return PTR_ERR(tegra->clk_regs); } } else { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "ccroc-reg"); - tegra->ccroc_regs = devm_ioremap_resource(&pdev->dev, res); + tegra->ccroc_regs = devm_platform_ioremap_resource_byname(pdev, "ccroc-reg"); if (IS_ERR(tegra->ccroc_regs)) { dev_err(&pdev->dev, "can't get ccroc registers"); return PTR_ERR(tegra->ccroc_regs); @@ -2195,7 +2188,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev) if (err) return err; - /* calculate tsensor calibaration data */ + /* calculate tsensor calibration data */ for (i = 0; i < soc->num_tsensors; ++i) { err = tegra_calc_tsensor_calib(&soc->tsensors[i], &shared_calib, diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 996c038..d20b25f 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -561,24 +561,6 @@ void thermal_zone_device_update(struct thermal_zone_device *tz, } EXPORT_SYMBOL_GPL(thermal_zone_device_update); -/** - * thermal_notify_framework - Sensor drivers use this API to notify framework - * @tz: thermal zone device - * @trip: indicates which trip point has been crossed - * - * This function handles the trip events from sensor drivers. It starts - * throttling the cooling devices according to the policy configured. - * For CRITICAL and HOT trip points, this notifies the respective drivers, - * and does actual throttling for other trip points i.e ACTIVE and PASSIVE. - * The throttling policy is based on the configured platform data; if no - * platform data is provided, this uses the step_wise throttling policy. - */ -void thermal_notify_framework(struct thermal_zone_device *tz, int trip) -{ - handle_thermal_trip(tz, trip); -} -EXPORT_SYMBOL_GPL(thermal_notify_framework); - static void thermal_zone_device_check(struct work_struct *work) { struct thermal_zone_device *tz = container_of(work, struct @@ -960,10 +942,7 @@ __thermal_cooling_device_register(struct device_node *np, { struct thermal_cooling_device *cdev; struct thermal_zone_device *pos = NULL; - int result; - - if (type && strlen(type) >= THERMAL_NAME_LENGTH) - return ERR_PTR(-EINVAL); + int ret; if (!ops || !ops->get_max_state || !ops->get_cur_state || !ops->set_cur_state) @@ -973,14 +952,17 @@ __thermal_cooling_device_register(struct device_node *np, if (!cdev) return ERR_PTR(-ENOMEM); - result = ida_simple_get(&thermal_cdev_ida, 0, 0, GFP_KERNEL); - if (result < 0) { - kfree(cdev); - return ERR_PTR(result); + ret = ida_simple_get(&thermal_cdev_ida, 0, 0, GFP_KERNEL); + if (ret < 0) + goto out_kfree_cdev; + cdev->id = ret; + + cdev->type = kstrdup(type ? type : "", GFP_KERNEL); + if (!cdev->type) { + ret = -ENOMEM; + goto out_ida_remove; } - cdev->id = result; - strlcpy(cdev->type, type ? : "", sizeof(cdev->type)); mutex_init(&cdev->lock); INIT_LIST_HEAD(&cdev->thermal_instances); cdev->np = np; @@ -990,12 +972,9 @@ __thermal_cooling_device_register(struct device_node *np, cdev->devdata = devdata; thermal_cooling_device_setup_sysfs(cdev); dev_set_name(&cdev->device, "cooling_device%d", cdev->id); - result = device_register(&cdev->device); - if (result) { - ida_simple_remove(&thermal_cdev_ida, cdev->id); - put_device(&cdev->device); - return ERR_PTR(result); - } + ret = device_register(&cdev->device); + if (ret) + goto out_kfree_type; /* Add 'this' new cdev to the global cdev list */ mutex_lock(&thermal_list_lock); @@ -1013,6 +992,15 @@ __thermal_cooling_device_register(struct device_node *np, mutex_unlock(&thermal_list_lock); return cdev; + +out_kfree_type: + kfree(cdev->type); + put_device(&cdev->device); +out_ida_remove: + ida_simple_remove(&thermal_cdev_ida, cdev->id); +out_kfree_cdev: + kfree(cdev); + return ERR_PTR(ret); } /** @@ -1171,6 +1159,7 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) ida_simple_remove(&thermal_cdev_ida, cdev->id); device_del(&cdev->device); thermal_cooling_device_destroy_sysfs(cdev); + kfree(cdev->type); put_device(&cdev->device); } EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister); diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 86b8cef..726e327 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -66,6 +66,7 @@ static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev) } void thermal_cdev_update(struct thermal_cooling_device *); +void __thermal_cdev_update(struct thermal_cooling_device *cdev); /** * struct thermal_trip - representation of a point in temperature domain diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c index 7f50f41..3edd047 100644 --- a/drivers/thermal/thermal_helpers.c +++ b/drivers/thermal/thermal_helpers.c @@ -192,18 +192,11 @@ static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev, thermal_cooling_device_stats_update(cdev, target); } -void thermal_cdev_update(struct thermal_cooling_device *cdev) +void __thermal_cdev_update(struct thermal_cooling_device *cdev) { struct thermal_instance *instance; unsigned long target = 0; - mutex_lock(&cdev->lock); - /* cooling device is updated*/ - if (cdev->updated) { - mutex_unlock(&cdev->lock); - return; - } - /* Make sure cdev enters the deepest cooling state */ list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) { dev_dbg(&cdev->device, "zone%d->target=%lu\n", @@ -216,11 +209,25 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev) thermal_cdev_set_cur_state(cdev, target); - cdev->updated = true; - mutex_unlock(&cdev->lock); trace_cdev_update(cdev, target); dev_dbg(&cdev->device, "set to state %lu\n", target); } + +/** + * thermal_cdev_update - update cooling device state if needed + * @cdev: pointer to struct thermal_cooling_device + * + * Update the cooling device state if there is a need. + */ +void thermal_cdev_update(struct thermal_cooling_device *cdev) +{ + mutex_lock(&cdev->lock); + if (!cdev->updated) { + __thermal_cdev_update(cdev); + cdev->updated = true; + } + mutex_unlock(&cdev->lock); +} EXPORT_SYMBOL(thermal_cdev_update); /** diff --git a/drivers/thermal/thermal_mmio.c b/drivers/thermal/thermal_mmio.c index d0bdf1e..ded1dd0 100644 --- a/drivers/thermal/thermal_mmio.c +++ b/drivers/thermal/thermal_mmio.c @@ -54,11 +54,8 @@ static int thermal_mmio_probe(struct platform_device *pdev) resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); sensor->mmio_base = devm_ioremap_resource(&pdev->dev, resource); - if (IS_ERR(sensor->mmio_base)) { - dev_err(&pdev->dev, "failed to ioremap memory (%ld)\n", - PTR_ERR(sensor->mmio_base)); + if (IS_ERR(sensor->mmio_base)) return PTR_ERR(sensor->mmio_base); - } sensor_init_func = device_get_match_data(&pdev->dev); if (sensor_init_func) { diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c index 69ef12f..5b76f9a 100644 --- a/drivers/thermal/thermal_of.c +++ b/drivers/thermal/thermal_of.c @@ -704,14 +704,17 @@ static int thermal_of_populate_bind_params(struct device_node *np, count = of_count_phandle_with_args(np, "cooling-device", "#cooling-cells"); - if (!count) { + if (count <= 0) { pr_err("Add a cooling_device property with at least one device\n"); + ret = -ENOENT; goto end; } __tcbp = kcalloc(count, sizeof(*__tcbp), GFP_KERNEL); - if (!__tcbp) + if (!__tcbp) { + ret = -ENOMEM; goto end; + } for (i = 0; i < count; i++) { ret = of_parse_phandle_with_args(np, "cooling-device", diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 8a3646e..ebe7cb7 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -9,30 +9,29 @@ * Eduardo Valentin */ -#include +#include +#include +#include +#include #include +#include #include -#include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include #include -#include -#include -#include -#include +#include +#include #include #include +#include +#include +#include +#include +#include +#include +#include +#include +#include #include "ti-bandgap.h" @@ -1143,14 +1142,10 @@ static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp) for (i = 0; i < bgp->conf->sensor_count; i++) { struct temp_sensor_registers *tsr; struct temp_sensor_regval *rval; - u32 val = 0; rval = &bgp->regval[i]; tsr = bgp->conf->sensors[i].registers; - if (TI_BANDGAP_HAS(bgp, COUNTER)) - val = ti_bandgap_readl(bgp, tsr->bgap_counter); - if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) ti_bandgap_writel(bgp, rval->tshut_threshold, tsr->tshut_threshold); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 6ac7bb1..d296f3b 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -91,7 +91,7 @@ struct thermal_cooling_device_ops { struct thermal_cooling_device { int id; - char type[THERMAL_NAME_LENGTH]; + char *type; struct device device; struct device_node *np; void *devdata; @@ -390,7 +390,6 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp); int thermal_zone_get_slope(struct thermal_zone_device *tz); int thermal_zone_get_offset(struct thermal_zone_device *tz); -void thermal_notify_framework(struct thermal_zone_device *, int); int thermal_zone_device_enable(struct thermal_zone_device *tz); int thermal_zone_device_disable(struct thermal_zone_device *tz); void thermal_zone_device_critical(struct thermal_zone_device *tz); @@ -436,10 +435,6 @@ static inline int thermal_zone_get_offset( struct thermal_zone_device *tz) { return -ENODEV; } -static inline void thermal_notify_framework(struct thermal_zone_device *tz, - int trip) -{ } - static inline int thermal_zone_device_enable(struct thermal_zone_device *tz) { return -ENODEV; } diff --git a/include/uapi/linux/thermal.h b/include/uapi/linux/thermal.h index c105054..9aa2fed 100644 --- a/include/uapi/linux/thermal.h +++ b/include/uapi/linux/thermal.h @@ -60,7 +60,7 @@ enum thermal_genl_event { THERMAL_GENL_EVENT_UNSPEC, THERMAL_GENL_EVENT_TZ_CREATE, /* Thermal zone creation */ THERMAL_GENL_EVENT_TZ_DELETE, /* Thermal zone deletion */ - THERMAL_GENL_EVENT_TZ_DISABLE, /* Thermal zone disabed */ + THERMAL_GENL_EVENT_TZ_DISABLE, /* Thermal zone disabled */ THERMAL_GENL_EVENT_TZ_ENABLE, /* Thermal zone enabled */ THERMAL_GENL_EVENT_TZ_TRIP_UP, /* Trip point crossed the way up */ THERMAL_GENL_EVENT_TZ_TRIP_DOWN, /* Trip point crossed the way down */