diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
index 2aa75b7..daa70a8 100644
--- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
@@ -16,7 +16,8 @@ properties:
       - brcm,iproc-nic-i2c
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clock-frequency:
     enum: [ 100000, 400000 ]
@@ -41,8 +42,15 @@ allOf:
           contains:
             const: brcm,iproc-nic-i2c
     then:
+      properties:
+        reg:
+          minItems: 2
       required:
         - brcm,ape-hsls-addr-mask
+    else:
+      properties:
+        reg:
+          maxItems: 1
 
 unevaluatedProperties: false
 
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 2a0962a..d882126 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -593,6 +593,13 @@ static bool is_use_dma(struct lpi2c_imx_struct *lpi2c_imx, struct i2c_msg *msg)
 		return false;
 
 	/*
+	 * A system-wide suspend or resume transition is in progress. LPI2C should use PIO to
+	 * transfer data to avoid issue caused by no ready DMA HW resource.
+	 */
+	if (pm_suspend_in_progress())
+		return false;
+
+	/*
 	 * When the length of data is less than I2C_DMA_THRESHOLD,
 	 * cpu mode is used directly to avoid low performance.
 	 */
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 3a04016..ae609bd 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -116,6 +116,7 @@ struct geni_i2c_dev {
 	dma_addr_t dma_addr;
 	struct dma_chan *tx_c;
 	struct dma_chan *rx_c;
+	bool no_dma;
 	bool gpi_mode;
 	bool abort_done;
 	bool is_tx_multi_desc_xfer;
@@ -447,7 +448,7 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 	size_t len = msg->len;
 	struct i2c_msg *cur;
 
-	dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
+	dma_buf = gi2c->no_dma ? NULL : i2c_get_dma_safe_msg_buf(msg, 32);
 	if (dma_buf)
 		geni_se_select_mode(se, GENI_SE_DMA);
 	else
@@ -486,7 +487,7 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 	size_t len = msg->len;
 	struct i2c_msg *cur;
 
-	dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
+	dma_buf = gi2c->no_dma ? NULL : i2c_get_dma_safe_msg_buf(msg, 32);
 	if (dma_buf)
 		geni_se_select_mode(se, GENI_SE_DMA);
 	else
@@ -1080,10 +1081,12 @@ static int geni_i2c_probe(struct platform_device *pdev)
 		goto err_resources;
 	}
 
-	if (desc && desc->no_dma_support)
+	if (desc && desc->no_dma_support) {
 		fifo_disable = false;
-	else
+		gi2c->no_dma = true;
+	} else {
 		fifo_disable = readl_relaxed(gi2c->se.base + GENI_IF_DISABLE_RO) & FIFO_IF_DISABLE;
+	}
 
 	if (fifo_disable) {
 		/* FIFO is disabled, so we can only use GPI DMA */
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index 3e8f126..9e3595b 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -670,12 +670,39 @@ static const struct riic_of_data riic_rz_t2h_info = {
 
 static int riic_i2c_suspend(struct device *dev)
 {
-	struct riic_dev *riic = dev_get_drvdata(dev);
-	int ret;
+	/*
+	 * Some I2C devices may need the I2C controller to remain active
+	 * during resume_noirq() or suspend_noirq(). If the controller is
+	 * autosuspended, there is no way to wake it up once runtime PM is
+	 * disabled (in suspend_late()).
+	 *
+	 * During system resume, the I2C controller will be available only
+	 * after runtime PM is re-enabled (in resume_early()). However, this
+	 * may be too late for some devices.
+	 *
+	 * Wake up the controller in the suspend() callback while runtime PM
+	 * is still enabled. The I2C controller will remain available until
+	 * the suspend_noirq() callback (pm_runtime_force_suspend()) is
+	 * called. During resume, the I2C controller can be restored by the
+	 * resume_noirq() callback (pm_runtime_force_resume()).
+	 *
+	 * Finally, the resume() callback re-enables autosuspend, ensuring
+	 * the I2C controller remains available until the system enters
+	 * suspend_noirq() and from resume_noirq().
+	 */
+	return pm_runtime_resume_and_get(dev);
+}
 
-	ret = pm_runtime_resume_and_get(dev);
-	if (ret)
-		return ret;
+static int riic_i2c_resume(struct device *dev)
+{
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+
+static int riic_i2c_suspend_noirq(struct device *dev)
+{
+	struct riic_dev *riic = dev_get_drvdata(dev);
 
 	i2c_mark_adapter_suspended(&riic->adapter);
 
@@ -683,12 +710,12 @@ static int riic_i2c_suspend(struct device *dev)
 	riic_clear_set_bit(riic, ICCR1_ICE, 0, RIIC_ICCR1);
 
 	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_sync(dev);
+	pm_runtime_force_suspend(dev);
 
 	return reset_control_assert(riic->rstc);
 }
 
-static int riic_i2c_resume(struct device *dev)
+static int riic_i2c_resume_noirq(struct device *dev)
 {
 	struct riic_dev *riic = dev_get_drvdata(dev);
 	int ret;
@@ -697,6 +724,10 @@ static int riic_i2c_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	ret = pm_runtime_force_resume(dev);
+	if (ret)
+		return ret;
+
 	ret = riic_init_hw(riic);
 	if (ret) {
 		/*
@@ -714,6 +745,7 @@ static int riic_i2c_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops riic_i2c_pm_ops = {
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(riic_i2c_suspend_noirq, riic_i2c_resume_noirq)
 	SYSTEM_SLEEP_PM_OPS(riic_i2c_suspend, riic_i2c_resume)
 };