diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
index d3b6e1a..5aa5926 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
@@ -40,7 +40,7 @@ Optional properties:
 Example for a Mali-T760:
 
 gpu@ffa30000 {
-	compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard";
+	compatible = "rockchip,rk3288-mali", "arm,mali-t760";
 	reg = <0xffa30000 0x10000>;
 	interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a208bfe..61a0cb1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -380,7 +380,7 @@ config ARCH_EP93XX
 	bool "EP93xx-based"
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT
+	imply ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 895fa6c..563901e 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -75,7 +75,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&pca0_pins>;
 					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupt-controller;
@@ -87,7 +87,7 @@
 					compatible = "nxp,pca9555";
 					pinctrl-names = "default";
 					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupt-controller;
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index a423e8e..67e72bc 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -301,25 +301,4 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
 	status = "okay";
-
-	/* VPIF capture port */
-	port@0 {
-		vpif_input_ch0: endpoint@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-
-		vpif_input_ch1: endpoint@1 {
-			reg = <1>;
-			bus-width = <8>;
-			data-shift = <8>;
-		};
-	};
-
-	/* VPIF display port */
-	port@1 {
-		vpif_output_ch0: endpoint {
-			bus-width = <8>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index b837fec..a0f0916 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -318,11 +318,4 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&vpif_capture_pins>;
 	status = "okay";
-
-	/* VPIF capture port */
-	port {
-		vpif_ch0: endpoint {
-			  bus-width = <8>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 1865976..c72a213 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -68,6 +68,34 @@
 			DM816X_IOPAD(0x0d08, MUX_MODE0)			/* USB1_DRVVBUS */
 		>;
 	};
+
+	nandflash_pins: nandflash_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0)		/* PINCTRL207 GPMC_CS0*/
+			DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0)		/* PINCTRL217 GPMC_ADV_ALE */
+			DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0)	/* PINCTRL214 GPMC_OE_RE */
+			DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0)		/* PINCTRL215 GPMC_BE0_CLE */
+			DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0)		/* PINCTRL213 GPMC_WE */
+			DM816X_IOPAD(0x0b6c, MUX_MODE0)				/* PINCTRL220 GPMC_WAIT */
+			DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0)		/* PINCTRL250 GPMC_CLK */
+			DM816X_IOPAD(0x0ba4, MUX_MODE0)				/* PINCTRL234 GPMC_D0 */
+			DM816X_IOPAD(0x0ba8, MUX_MODE0)				/* PINCTRL234 GPMC_D1 */
+			DM816X_IOPAD(0x0bac, MUX_MODE0)				/* PINCTRL234 GPMC_D2 */
+			DM816X_IOPAD(0x0bb0, MUX_MODE0)				/* PINCTRL234 GPMC_D3 */
+			DM816X_IOPAD(0x0bb4, MUX_MODE0)				/* PINCTRL234 GPMC_D4 */
+			DM816X_IOPAD(0x0bb8, MUX_MODE0)				/* PINCTRL234 GPMC_D5 */
+			DM816X_IOPAD(0x0bbc, MUX_MODE0)				/* PINCTRL234 GPMC_D6 */
+			DM816X_IOPAD(0x0bc0, MUX_MODE0)				/* PINCTRL234 GPMC_D7 */
+			DM816X_IOPAD(0x0bc4, MUX_MODE0)				/* PINCTRL234 GPMC_D8 */
+			DM816X_IOPAD(0x0bc8, MUX_MODE0)				/* PINCTRL234 GPMC_D9 */
+			DM816X_IOPAD(0x0bcc, MUX_MODE0)				/* PINCTRL234 GPMC_D10 */
+			DM816X_IOPAD(0x0bd0, MUX_MODE0)				/* PINCTRL234 GPMC_D11 */
+			DM816X_IOPAD(0x0bd4, MUX_MODE0)				/* PINCTRL234 GPMC_D12 */
+			DM816X_IOPAD(0x0bd8, MUX_MODE0)				/* PINCTRL234 GPMC_D13 */
+			DM816X_IOPAD(0x0bdc, MUX_MODE0)				/* PINCTRL234 GPMC_D14 */
+			DM816X_IOPAD(0x0be0, MUX_MODE0)				/* PINCTRL234 GPMC_D15 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -90,6 +118,8 @@
 
 &gpmc {
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
@@ -98,9 +128,11 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		gpmc,sync-clk-ps = <0>;
@@ -164,7 +196,7 @@
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 };
 
 /* At least dm8168-evm rev c won't support multipoint, later may */
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 59cbf95..566b2a8 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -145,7 +145,7 @@
 		};
 
 		elm: elm@48080000 {
-			compatible = "ti,816-elm";
+			compatible = "ti,am3352-elm";
 			ti,hwmods = "elm";
 			reg = <0x48080000 0x2000>;
 			interrupts = <4>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 4d57a55..a6298eb 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -190,7 +190,7 @@
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,impedance-control = <0x1f>;
+		ti,min-output-impedance;
 	};
 
 	dp83867_1: ethernet-phy@3 {
@@ -198,7 +198,7 @@
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,impedance-control = <0x1f>;
+		ti,min-output-impedance;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 497a947..5739389 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -59,6 +59,9 @@
 		compatible = "samsung,exynos4210-audss-clock";
 		reg = <0x03810000 0x0C>;
 		#clock-cells = <1>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_SCLK_AUDIO0>;
+		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 	};
 
 	i2s0: i2s@03830000 {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 2484f11..858e1fe 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1126,8 +1126,8 @@
 		};
 	};
 
-	gpu: mali@ffa30000 {
-		compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard";
+	gpu: gpu@ffa30000 {
+		compatible = "rockchip,rk3288-mali", "arm,mali-t760";
 		reg = <0xffa30000 0x10000>;
 		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 8923ba6..19a8f4f 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -44,7 +44,9 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -175,8 +177,8 @@
 			compatible = "allwinner,sun8i-a83t-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 21>;
-			resets = <&ccu 7>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
 			#dma-cells = <1>;
 		};
 
@@ -195,7 +197,7 @@
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c20800 0x400>;
-			clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -247,8 +249,8 @@
 				     "allwinner,sun8i-h3-spdif";
 			reg = <0x01c21000 0x400>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 44>, <&ccu 76>;
-			resets = <&ccu 32>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
 			clock-names = "apb", "spdif";
 			dmas = <&dma 2>;
 			dma-names = "tx";
@@ -263,8 +265,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 53>;
-			resets = <&ccu 40>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 6f21626..d38282b 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -394,7 +394,7 @@
 		emac: ethernet@1c30000 {
 			compatible = "allwinner,sun8i-h3-emac";
 			syscon = <&syscon>;
-			reg = <0x01c30000 0x104>;
+			reg = <0x01c30000 0x10000>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			resets = <&ccu RST_BUS_EMAC>;
diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts
index 86d8df9..13bcc46 100644
--- a/arch/arm/boot/dts/tango4-vantage-1172.dts
+++ b/arch/arm/boot/dts/tango4-vantage-1172.dts
@@ -22,7 +22,7 @@
 };
 
 &eth0 {
-	phy-connection-type = "rgmii";
+	phy-connection-type = "rgmii-id";
 	phy-handle = <&eth0_phy>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index b5625d0..e568c8c 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1166,7 +1166,7 @@ static struct tvp514x_platform_data tvp5146_pdata = {
 
 #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
 
-static const struct vpif_input da850_ch0_inputs[] = {
+static struct vpif_input da850_ch0_inputs[] = {
 	{
 		.input = {
 			.index = 0,
@@ -1181,7 +1181,7 @@ static const struct vpif_input da850_ch0_inputs[] = {
 	},
 };
 
-static const struct vpif_input da850_ch1_inputs[] = {
+static struct vpif_input da850_ch1_inputs[] = {
 	{
 		.input = {
 			.index = 0,
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index f5dce9b..f77a4f7 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -218,6 +218,15 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 }
 EXPORT_SYMBOL(clk_set_parent);
 
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (!clk)
+		return NULL;
+
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
 int clk_register(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 39ef3b6..beec5f1 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -475,6 +475,26 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 }
 EXPORT_SYMBOL(clk_set_rate);
 
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
 
 static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
 static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 7a0c13b..844e8ac 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -95,8 +95,10 @@ static inline void __indirect_writeb(u8 value, volatile void __iomem *p)
 }
 
 static inline void __indirect_writesb(volatile void __iomem *bus_addr,
-				      const u8 *vaddr, int count)
+				      const void *p, int count)
 {
+	const u8 *vaddr = p;
+
 	while (count--)
 		writeb(*vaddr++, bus_addr);
 }
@@ -118,8 +120,10 @@ static inline void __indirect_writew(u16 value, volatile void __iomem *p)
 }
 
 static inline void __indirect_writesw(volatile void __iomem *bus_addr,
-				      const u16 *vaddr, int count)
+				      const void *p, int count)
 {
+	const u16 *vaddr = p;
+
 	while (count--)
 		writew(*vaddr++, bus_addr);
 }
@@ -137,8 +141,9 @@ static inline void __indirect_writel(u32 value, volatile void __iomem *p)
 }
 
 static inline void __indirect_writesl(volatile void __iomem *bus_addr,
-				      const u32 *vaddr, int count)
+				      const void *p, int count)
 {
+	const u32 *vaddr = p;
 	while (count--)
 		writel(*vaddr++, bus_addr);
 }
@@ -160,8 +165,10 @@ static inline u8 __indirect_readb(const volatile void __iomem *p)
 }
 
 static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
-				     u8 *vaddr, u32 count)
+				     void *p, u32 count)
 {
+	u8 *vaddr = p;
+
 	while (count--)
 		*vaddr++ = readb(bus_addr);
 }
@@ -183,8 +190,10 @@ static inline u16 __indirect_readw(const volatile void __iomem *p)
 }
 
 static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
-				     u16 *vaddr, u32 count)
+				     void *p, u32 count)
 {
+	u16 *vaddr = p;
+
 	while (count--)
 		*vaddr++ = readw(bus_addr);
 }
@@ -204,8 +213,10 @@ static inline u32 __indirect_readl(const volatile void __iomem *p)
 }
 
 static inline void __indirect_readsl(const volatile void __iomem *bus_addr,
-				     u32 *vaddr, u32 count)
+				     void *p, u32 count)
 {
+	u32 *vaddr = p;
+
 	while (count--)
 		*vaddr++ = readl(bus_addr);
 }
@@ -523,8 +534,15 @@ static inline void iowrite32_rep(void __iomem *addr, const void *vaddr,
 #endif
 }
 
-#define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
-#define	ioport_unmap(addr)
+#define ioport_map(port, nr) ioport_map(port, nr)
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	return ((void __iomem*)((port) + PIO_OFFSET));
+}
+#define	ioport_unmap(addr) ioport_unmap(addr)
+static inline void ioport_unmap(void __iomem *addr)
+{
+}
 #endif /* CONFIG_PCI */
 
 #endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 3330ac7..671c7a0 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -238,7 +238,7 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg)
 #endif
 
 #if IS_ENABLED(CONFIG_USB_SUPPORT)
-static u64 usb_dma_mask = ~(u32)0;
+static u64 __maybe_unused usb_dma_mask = ~(u32)0;
 
 #if IS_ENABLED(CONFIG_USB_MV_UDC)
 struct resource pxa168_u2o_resources[] = {
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index e62273a..4ffbbd2 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -211,7 +211,7 @@ static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
 		return PTR_ERR(base);
 
 	writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG);
-	writel(virt_to_phys(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG);
+	writel(__pa_symbol(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG);
 
 	iounmap(base);
 
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 6613a6f..6cbc69c 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -510,6 +510,7 @@ static void __init ams_delta_init(void)
 static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
 {
 	struct modem_private_data *priv = port->private_data;
+	int ret;
 
 	if (IS_ERR(priv->regulator))
 		return;
@@ -518,9 +519,16 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
 		return;
 
 	if (state == 0)
-		regulator_enable(priv->regulator);
+		ret = regulator_enable(priv->regulator);
 	else if (old == 0)
-		regulator_disable(priv->regulator);
+		ret = regulator_disable(priv->regulator);
+	else
+		ret = 0;
+
+	if (ret)
+		dev_warn(port->dev,
+			 "ams_delta modem_pm: failed to %sable regulator: %d\n",
+			 state ? "dis" : "en", ret);
 }
 
 static struct plat_serial8250_port ams_delta_modem_ports[] = {
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 4dfb995..95ac192 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -441,13 +441,11 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { {
 	.chip_select		= 0,
 } };
 
-#ifdef	CONFIG_PM
 static irqreturn_t
 osk_mistral_wake_interrupt(int irq, void *ignored)
 {
 	return IRQ_HANDLED;
 }
-#endif
 
 static void __init osk_mistral_init(void)
 {
@@ -515,7 +513,6 @@ static void __init osk_mistral_init(void)
 
 		gpio_direction_input(OMAP_MPUIO(2));
 		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
-#ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
 		 * button for more than wakeup from system sleep.
 		 */
@@ -529,7 +526,6 @@ static void __init osk_mistral_init(void)
 				ret);
 		} else
 			enable_irq_wake(irq);
-#endif
 	} else
 		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
 
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index dc9e34e..b1e661b 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -28,7 +28,7 @@ static const struct of_device_id omap_dt_match_table[] __initconst = {
 	{ }
 };
 
-static void __init omap_generic_init(void)
+static void __init __maybe_unused omap_generic_init(void)
 {
 	pdata_quirks_init(omap_dt_match_table);
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 1d739d1..1cd20e4 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -410,7 +410,7 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
 }
 
-static void __init omap_hwmod_init_postsetup(void)
+static void __init __maybe_unused omap_hwmod_init_postsetup(void)
 {
 	u8 postsetup_state;
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index d44e0e2..841ba19 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -486,7 +486,6 @@ int __init omap3_pm_init(void)
 	ret = request_irq(omap_prcm_event_to_irq("io"),
 		_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
 		omap3_pm_init);
-	enable_irq(omap_prcm_event_to_irq("io"));
 
 	if (ret) {
 		pr_err("pm: Failed to request pm_io irq\n");
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 382e236..64f6451 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -692,7 +692,6 @@ static int omap3xxx_prm_late_init(void)
 {
 	struct device_node *np;
 	int irq_num;
-	int ret;
 
 	if (!(prm_features & PRM_HAS_IO_WAKEUP))
 		return 0;
@@ -712,12 +711,8 @@ static int omap3xxx_prm_late_init(void)
 	}
 
 	omap3xxx_prm_enable_io_wakeup();
-	ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
-	if (!ret)
-		irq_set_status_flags(omap_prcm_event_to_irq("io"),
-				     IRQ_NOAUTOEN);
 
-	return ret;
+	return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
 }
 
 static void __exit omap3xxx_prm_exit(void)
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 87e86a4..3ab5df1 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -337,6 +337,27 @@ static void omap44xx_prm_reconfigure_io_chain(void)
 }
 
 /**
+ * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM.  For I/O wakeups
+ * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
+ * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
+ */
+static void __init omap44xx_prm_enable_io_wakeup(void)
+{
+	s32 inst = omap4_prmst_get_prm_dev_inst();
+
+	if (inst == PRM_INSTANCE_UNKNOWN)
+		return;
+
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
+				    OMAP4430_GLOBAL_WUEN_MASK,
+				    inst,
+				    omap4_prcm_irq_setup.pm_ctrl);
+}
+
+/**
  * omap44xx_prm_read_reset_sources - return the last SoC reset source
  *
  * Return a u32 representing the last reset sources of the SoC.  The
@@ -668,6 +689,8 @@ struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_has_voltdm	= omap4_check_vcvp,
 };
 
+static int omap44xx_prm_late_init(void);
+
 /*
  * XXX document
  */
@@ -675,6 +698,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.read_reset_sources = &omap44xx_prm_read_reset_sources,
 	.was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old,
 	.clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old,
+	.late_init = &omap44xx_prm_late_init,
 	.assert_hardreset	= omap4_prminst_assert_hardreset,
 	.deassert_hardreset	= omap4_prminst_deassert_hardreset,
 	.is_hardreset_asserted	= omap4_prminst_is_hardreset_asserted,
@@ -711,6 +735,37 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
+static int omap44xx_prm_late_init(void)
+{
+	int irq_num;
+
+	if (!(prm_features & PRM_HAS_IO_WAKEUP))
+		return 0;
+
+	irq_num = of_irq_get(prm_init_data->np, 0);
+	/*
+	 * Already have OMAP4 IRQ num. For all other platforms, we need
+	 * IRQ numbers from DT
+	 */
+	if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
+		if (irq_num == -EPROBE_DEFER)
+			return irq_num;
+
+		/* Have nothing to do */
+		return 0;
+	}
+
+	/* Once OMAP4 DT is filled as well */
+	if (irq_num >= 0) {
+		omap4_prcm_irq_setup.irq = irq_num;
+		omap4_prcm_irq_setup.xlate_irq = NULL;
+	}
+
+	omap44xx_prm_enable_io_wakeup();
+
+	return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+}
+
 static void __exit omap44xx_prm_exit(void)
 {
 	prm_unregister(&omap44xx_prm_ll_data);
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index 8cadb30..ffe05c2 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -15,7 +15,7 @@
 #include <linux/of_platform.h>
 #include "common.h"
 
-static void __init sirfsoc_init_late(void)
+static void __init __maybe_unused sirfsoc_init_late(void)
 {
 	sirfsoc_pm_init();
 }
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 76fbc11..ce7d97b 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -566,6 +566,7 @@ config MACH_ICONTROL
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select FB_W100
+	select FB
 	select PXA25x
 
 config MACH_E330
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 990d2bf..9bf4ea6 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -17,11 +17,15 @@
 
 #include <mach/regs-ost.h>
 
-#define xip_irqpending()	(ICIP & ICMR)
+/* restored July 2017, this did not build since 2011! */
+
+#define ICIP			io_p2v(0x40d00000)
+#define ICMR			io_p2v(0x40d00004)
+#define xip_irqpending()	(readl(ICIP) & readl(ICMR))
 
 /* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+#define xip_currtime()		readl(OSCR)
+#define xip_elapsed_since(x)	(signed)((readl(OSCR) - (x)) / 4)
 
 /*
  * xip_cpu_idle() is used when waiting for a delay equal or larger than
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
index aa79fa4..622d4e5 100644
--- a/arch/arm/mach-rpc/include/mach/hardware.h
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -25,8 +25,8 @@
  *  *_SIZE  is the size of the region
  *  *_BASE  is the virtual address
  */
-#define RAM_SIZE		0x10000000
-#define RAM_START		0x10000000
+#define RPC_RAM_SIZE		0x10000000
+#define RPC_RAM_START		0x10000000
 
 #define EASI_SIZE		0x08000000	/* EASI I/O */
 #define EASI_START		0x08000000
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index 0db4689..7d52cd9 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -35,6 +35,31 @@ struct clk clk_##_name = {				\
 
 static DEFINE_SPINLOCK(clocks_lock);
 
+/* Dummy clk routine to build generic kernel parts that may be using them */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_get_rate(clk);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
 static void clk_gpio27_enable(struct clk *clk)
 {
 	/*
diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
index b3d6840..cb76096 100644
--- a/arch/arm/mach-sa1100/include/mach/mtd-xip.h
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -20,7 +20,7 @@
 #define xip_irqpending()	(ICIP & ICMR)
 
 /* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+#define xip_currtime()		readl_relaxed(OSCR)
+#define xip_elapsed_since(x)	(signed)((readl_relaxed(OSCR) - (x)) / 4)
 
 #endif /* __ARCH_SA1100_MTD_XIP_H__ */
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 73e3adb..44438f3 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -67,8 +67,12 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 {
 	struct device *dev = data;
 	struct i2c_client *client;
+	static bool done;
 	u32 mon;
 
+	if (done)
+		return 0;
+
 	mon = ioread32(irqc + IRQC_MONITOR);
 	dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon);
 	if (mon & REGULATOR_IRQ_MASK)
@@ -99,7 +103,7 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 remove:
 	dev_info(dev, "IRQ2 is not asserted, removing quirk\n");
 
-	bus_unregister_notifier(&i2c_bus_type, nb);
+	done = true;
 	iounmap(irqc);
 	return 0;
 }
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index ac6fd1a..3f93fac 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -93,3 +93,32 @@ void nuc900_subclk_enable(struct clk *clk, int enable)
 
 	__raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
 }
+
+/* dummy functions, should not be called */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	WARN_ON(clk);
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 9d00622..bd0f33b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -452,7 +452,7 @@
 		emac: ethernet@1c30000 {
 			compatible = "allwinner,sun50i-a64-emac";
 			syscon = <&syscon>;
-			reg = <0x01c30000 0x100>;
+			reg = <0x01c30000 0x10000>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			resets = <&ccu RST_BUS_EMAC>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 35b8c88..738ed68 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -400,7 +400,7 @@
 			};
 
 			pwm_AO_ab: pwm@550 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
 				reg = <0x0 0x00550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 72c5a9f..94567eb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -109,8 +109,8 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
+	clocks = <&xtal> , <&xtal>;
+	clock-names = "clkin0", "clkin1" ;
 };
 
 &pwm_ef {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 890821d..266fbcf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -10,12 +10,20 @@
 
 #include <dt-bindings/input/input.h>
 
-#include "meson-gxl-s905x-p212.dtsi"
+#include "meson-gxl-s905x.dtsi"
 
 / {
 	compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
 	model = "Libre Technology CC";
 
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	cvbs-connector {
 		compatible = "composite-video-connector";
 
@@ -26,6 +34,11 @@
 		};
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -53,6 +66,39 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_card: regulator-vcc-card {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &cvbs_vdac_port {
@@ -61,6 +107,16 @@
 	};
 };
 
+&ethmac {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
@@ -73,20 +129,43 @@
 	};
 };
 
-/*
- * The following devices exists but are exposed on the general
- * purpose GPIO header. End user may well decide to use those pins
- * for another purpose
- */
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
 
-&sd_emmc_a {
-	status = "disabled";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_card>;
 };
 
-&uart_A {
-	status = "disabled";
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <50000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
 };
 
-&wifi32k {
-	status = "disabled";
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index dbcc3d4..51763d6 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -219,7 +219,7 @@
 				reg = <0x18800 0x100>, <0x18C00 0x20>;
 				gpiosb: gpio {
 					#gpio-cells = <2>;
-					gpio-ranges = <&pinctrl_sb 0 0 29>;
+					gpio-ranges = <&pinctrl_sb 0 0 30>;
 					gpio-controller;
 					interrupts =
 					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 726528c..4c68605 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -270,6 +270,7 @@
 				interrupt-names = "mem", "ring0", "ring1",
 				"ring2", "ring3", "eip";
 				clocks = <&cpm_clk 1 26>;
+				dma-coherent;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 95f8e5f..923f354 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -64,7 +64,7 @@
 				compatible = "marvell,armada-8k-rtc";
 				reg = <0x284000 0x20>, <0x284080 0x24>;
 				reg-names = "rtc", "rtc-soc";
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			cps_ethernet: ethernet@0 {
@@ -261,6 +261,7 @@
 				interrupt-names = "mem", "ring0", "ring1",
 						  "ring2", "ring3", "eip";
 				clocks = <&cps_clk 1 26>;
+				dma-coherent;
 				/*
 				 * The cryptographic engine found on the cp110
 				 * master is enabled by default at the SoC
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index aef35e0..a451996 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -508,7 +508,7 @@
 
 	/* audio_clkout0/1/2/3 */
 	#clock-cells = <1>;
-	clock-frequency = <11289600 12288000>;
+	clock-frequency = <12288000 11289600>;
 
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index b5c6ee0..d1a3f3b 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -281,7 +281,7 @@
 
 	/* audio_clkout0/1/2/3 */
 	#clock-cells = <1>;
-	clock-frequency = <11289600 12288000>;
+	clock-frequency = <12288000 11289600>;
 
 	status = "okay";
 
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 6c7d147..b4ca115 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -476,6 +476,7 @@ CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_MMCC_8996=y
+CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_ARM_MHU=y
 CONFIG_PLATFORM_MHU=y
diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c
index 1e6e026..f76be6b 100644
--- a/drivers/bus/uniphier-system-bus.c
+++ b/drivers/bus/uniphier-system-bus.c
@@ -256,10 +256,23 @@ static int uniphier_system_bus_probe(struct platform_device *pdev)
 
 	uniphier_system_bus_set_reg(priv);
 
+	platform_set_drvdata(pdev, priv);
+
 	/* Now, the bus is configured.  Populate platform_devices below it */
 	return of_platform_default_populate(dev->of_node, NULL, dev);
 }
 
+static int __maybe_unused uniphier_system_bus_resume(struct device *dev)
+{
+	uniphier_system_bus_set_reg(dev_get_drvdata(dev));
+
+	return 0;
+}
+
+static const struct dev_pm_ops uniphier_system_bus_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(NULL, uniphier_system_bus_resume)
+};
+
 static const struct of_device_id uniphier_system_bus_match[] = {
 	{ .compatible = "socionext,uniphier-system-bus" },
 	{ /* sentinel */ }
@@ -271,6 +284,7 @@ static struct platform_driver uniphier_system_bus_driver = {
 	.driver = {
 		.name	= "uniphier-system-bus",
 		.of_match_table = uniphier_system_bus_match,
+		.pm = &uniphier_system_bus_pm_ops,
 	},
 };
 module_platform_driver(uniphier_system_bus_driver);
diff --git a/drivers/soc/zte/Kconfig b/drivers/soc/zte/Kconfig
index 20bde38..e9d750c 100644
--- a/drivers/soc/zte/Kconfig
+++ b/drivers/soc/zte/Kconfig
@@ -2,6 +2,7 @@
 # ZTE SoC drivers
 #
 menuconfig SOC_ZTE
+	depends on ARCH_ZX || COMPILE_TEST
 	bool "ZTE SoC driver support"
 
 if SOC_ZTE