Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

670310df · Linus Torvalds <[email protected]> · 2017-11-13 17:33:11 -08:00

Pull irq core updates from Thomas Gleixner:
 "A rather large update for the interrupt core code and the irq chip drivers:

   - Add a new bitmap matrix allocator and supporting changes, which is
     used to replace the x86 vector allocator which comes with separate
     pull request. This allows to replace the convoluted nested loop
     allocation function in x86 with a facility which supports the
     recently added property of managed interrupts proper and allows to
     switch to a best effort vector reservation scheme, which addresses
     problems with vector exhaustion.

   - A large update to the ARM GIC-V3-ITS driver adding support for
     range selectors.

   - New interrupt controllers:
       - Meson and Meson8 GPIO
       - BCM7271 L2
       - Socionext EXIU

     If you expected that this will stop at some point, I have to
     disappoint you. There are new ones posted already. Sigh!

   - STM32 interrupt controller support for new platforms.

   - A pile of fixes, cleanups and updates to the MIPS GIC driver

   - The usual small fixes, cleanups and updates all over the place.
     Most visible one is to move the irq chip drivers Kconfig switches
     into a separate Kconfig menu"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  genirq: Fix type of shifting literal 1 in __setup_irq()
  irqdomain: Drop pointless NULL check in virq_debug_show_one
  genirq/proc: Return proper error code when irq_set_affinity() fails
  irq/work: Use llist_for_each_entry_safe
  irqchip: mips-gic: Print warning if inherited GIC base is used
  irqchip/mips-gic: Add pr_fmt and reword pr_* messages
  irqchip/stm32: Move the wakeup on interrupt mask
  irqchip/stm32: Fix initial values
  irqchip/stm32: Add stm32h7 support
  dt-bindings/interrupt-controllers: Add compatible string for stm32h7
  irqchip/stm32: Add multi-bank management
  irqchip/stm32: Select GENERIC_IRQ_CHIP
  irqchip/exiu: Add support for Socionext Synquacer EXIU controller
  dt-bindings: Add description of Socionext EXIU interrupt controller
  irqchip/gic-v3-its: Fix VPE activate callback return value
  irqchip: mips-gic: Make IPI bitmaps static
  irqchip: mips-gic: Share register writes in gic_set_type()
  irqchip: mips-gic: Remove gic_vpes variable
  irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
  irqchip: mips-gic: Configure EIC when CPUs come online
  ...

Commit: 670310dfbae0eefe7318ff6a61e29e67a7a7bbce
Parents: 43ff2f4d · ffc661c9

Merge commit. Changes below are compared with the first parent: 43ff2f4d.

Changes

57 files changed · +2490 −408

File	Status	Add	Del	Content
Documentation/admin-guide/kernel-parameters.txt	modified	+7	−0	View file
Documentation/arm64/silicon-errata.txt	modified	+1	−0	View file
Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt	added	+36	−0	View file
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt	modified	+4	−0	View file
Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt	modified	+2	−1	View file
Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt	modified	+3	−0	View file
Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt	added	+32	−0	View file
Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt	modified	+3	−1	View file
arch/arm/include/asm/arch_gicv3.h	modified	+5	−0	View file
arch/arm64/Kconfig	modified	+19	−0	View file
arch/arm64/Kconfig.platforms	modified	+3	−0	View file
arch/arm64/include/asm/arch_gicv3.h	modified	+5	−0	View file
arch/x86/include/asm/irqdomain.h	modified	+2	−2	View file
arch/x86/kernel/apic/htirq.c	modified	+3	−2	View file
arch/x86/kernel/apic/io_apic.c	modified	+5	−4	View file
arch/x86/platform/uv/uv_irq.c	modified	+3	−2	View file
drivers/gpio/gpio-xgene-sb.c	modified	+5	−3	View file
drivers/iommu/amd_iommu.c	modified	+3	−2	View file
drivers/iommu/intel_irq_remapping.c	modified	+3	−2	View file
drivers/irqchip/Kconfig	modified	+13	−0	View file
drivers/irqchip/Makefile	modified	+2	−0	View file
drivers/irqchip/irq-aspeed-i2c-ic.c	modified	+2	−2	View file
drivers/irqchip/irq-brcmstb-l2.c	modified	+124	−47	View file
drivers/irqchip/irq-gic-common.c	modified	+3	−2	View file
drivers/irqchip/irq-gic-common.h	modified	+1	−1	View file
drivers/irqchip/irq-gic-v3-its.c	modified	+310	−80	View file
drivers/irqchip/irq-gic-v3.c	modified	+41	−9	View file
drivers/irqchip/irq-gic.c	modified	+62	−9	View file
drivers/irqchip/irq-meson-gpio.c	added	+419	−0	View file
drivers/irqchip/irq-mips-gic.c	modified	+123	−103	View file
drivers/irqchip/irq-omap-intc.c	modified	+2	−14	View file
drivers/irqchip/irq-renesas-intc-irqpin.c	modified	+3	−6	View file
drivers/irqchip/irq-sni-exiu.c	added	+227	−0	View file
drivers/irqchip/irq-stm32-exti.c	modified	+157	−49	View file
drivers/pinctrl/stm32/pinctrl-stm32.c	modified	+3	−2	View file
include/linux/cpuhotplug.h	modified	+1	−0	View file
include/linux/irq.h	modified	+22	−0	View file
include/linux/irqchip/arm-gic-v3.h	modified	+4	−0	View file
include/linux/irqchip/arm-gic-v4.h	modified	+9	−0	View file
include/linux/irqchip/irq-omap-intc.h	modified	+0	−2	View file
include/linux/irqdesc.h	modified	+1	−0	View file
include/linux/irqdomain.h	modified	+11	−9	View file
include/linux/msi.h	modified	+5	−0	View file
include/trace/events/irq_matrix.h	added	+201	−0	View file
kernel/irq/Kconfig	modified	+3	−0	View file
kernel/irq/Makefile	modified	+1	−0	View file
kernel/irq/autoprobe.c	modified	+1	−1	View file
kernel/irq/chip.c	modified	+29	−6	View file
kernel/irq/debugfs.c	modified	+12	−0	View file
kernel/irq/internals.h	modified	+19	−0	View file
kernel/irq/irqdesc.c	modified	+4	−5	View file
kernel/irq/irqdomain.c	modified	+36	−24	View file
kernel/irq/manage.c	modified	+19	−4	View file
kernel/irq/matrix.c	added	+443	−0	View file
kernel/irq/msi.c	modified	+27	−5	View file
kernel/irq/proc.c	modified	+3	−2	View file
kernel/irq_work.c	modified	+3	−7	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/admin-guide/kernel-parameters.txt

View file

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 38ed878..b74e133 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1716,6 +1716,13 @@
 	irqaffinity=	[SMP] Set the default irq affinity mask
 			The argument is a cpu list, as described above.
 
+	irqchip.gicv2_force_probe=
+			[ARM, ARM64]
+			Format: <bool>
+			Force the kernel to look for the second 4kB page
+			of a GICv2 controller even if the memory range
+			exposed by the device tree is too small.
+
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
 			for it. Intended to get systems with badly broken

Documentation/arm64/silicon-errata.txt

View file

diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index 66e8ce1..304bf22 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -70,6 +70,7 @@ stable kernels.
 |                |                 |                 |                             |
 | Hisilicon      | Hip0{5,6,7}     | #161010101      | HISILICON_ERRATUM_161010101 |
 | Hisilicon      | Hip0{6,7}       | #161010701      | N/A                         |
+| Hisilicon      | Hip07           | #161600802      | HISILICON_ERRATUM_161600802 |
 |                |                 |                 |                             |
 | Qualcomm Tech. | Falkor v1       | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 | Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |

Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
new file mode 100644
index 0000000..a83f9a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -0,0 +1,36 @@
+Amlogic meson GPIO interrupt controller
+
+Meson SoCs contains an interrupt controller which is able to watch the SoC
+pads and generate an interrupt on edge or level. The controller is essentially
+a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
+or level and polarity. It does not expose all 256 mux inputs because the
+documentation shows that the upper part is not mapped to any pad. The actual
+number of interrupt exposed depends on the SoC.
+
+Required properties:
+
+- compatible : must have "amlogic,meson8-gpio-intc” and either
+   “amlogic,meson8-gpio-intc” for meson8 SoCs (S802) or
+   “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or
+   “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) or
+   “amlogic,meson-gxl-gpio-intc” for GXL SoCs (S905X, S912)
+- interrupt-parent : a phandle to the GIC the interrupts are routed to.
+   Usually this is provided at the root level of the device tree as it is
+   common to most of the SoC.
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+   interrupt source. The value must be 2.
+- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
+   are the hwirqs used on the parent interrupt controller.
+
+Example:
+
+gpio_interrupt: interrupt-controller@9880 {
+	compatible = "amlogic,meson-gxbb-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	reg = <0x0 0x9880 0x0 0x10>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
+};

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 5eb108e..0a57f2f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -75,6 +75,10 @@ These nodes must have the following properties:
 - reg: Specifies the base physical address and size of the ITS
   registers.
 
+Optional:
+- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated
+  address and size of the pre-ITS window.
+
 The main GIC node must contain the appropriate #address-cells,
 #size-cells and ranges properties for the reg property of all ITS
 nodes.

Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
index 448273a..36df06c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
@@ -2,7 +2,8 @@ Broadcom Generic Level 2 Interrupt Controller
 
 Required properties:
 
-- compatible: should be "brcm,l2-intc"
+- compatible: should be "brcm,l2-intc" for latched interrupt controllers
+              should be "brcm,bcm7271-l2-intc" for level interrupt controllers
 - reg: specifies the base physical address and size of the registers
 - interrupt-controller: identifies the node as an interrupt controller
 - #interrupt-cells: specifies the number of cells needed to encode an

Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
index e3f052d..33c9a10 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
@@ -13,6 +13,9 @@ Required properties:
     - "renesas,irqc-r8a7793" (R-Car M2-N)
     - "renesas,irqc-r8a7794" (R-Car E2)
     - "renesas,intc-ex-r8a7795" (R-Car H3)
+    - "renesas,intc-ex-r8a7796" (R-Car M3-W)
+    - "renesas,intc-ex-r8a77970" (R-Car V3M)
+    - "renesas,intc-ex-r8a77995" (R-Car D3)
 - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
   interrupts.txt in this directory
 - clocks: Must contain a reference to the functional clock.

Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
new file mode 100644
index 0000000..8b2faef
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
@@ -0,0 +1,32 @@
+Socionext SynQuacer External Interrupt Unit (EXIU)
+
+The Socionext Synquacer SoC has an external interrupt unit (EXIU)
+that forwards a block of 32 configurable input lines to 32 adjacent
+level-high type GICv3 SPIs.
+
+Required properties:
+
+- compatible           : Should be "socionext,synquacer-exiu".
+- reg                  : Specifies base physical address and size of the
+                         control registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells     : Specifies the number of cells needed to encode an
+                         interrupt source. The value must be 3.
+- interrupt-parent     : phandle of the GIC these interrupts are routed to.
+- socionext,spi-base   : The SPI number of the first SPI of the 32 adjacent
+                         ones the EXIU forwards its interrups to.
+
+Notes:
+
+- Only SPIs can use the EXIU as an interrupt parent.
+
+Example:
+
+	exiu: interrupt-controller@510c0000 {
+		compatible = "socionext,synquacer-exiu";
+		reg = <0x0 0x510c0000 0x0 0x20>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <3>;
+		socionext,spi-base = <112>;
+	};

Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
index 6e7703d..edf03f0 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
@@ -2,7 +2,9 @@ STM32 External Interrupt Controller
 
 Required properties:
 
-- compatible: Should be "st,stm32-exti"
+- compatible: Should be:
+    "st,stm32-exti"
+    "st,stm32h7-exti"
 - reg: Specifies base physical address and size of the registers
 - interrupt-controller: Indentifies the node as an interrupt controller
 - #interrupt-cells: Specifies the number of cells to encode an interrupt

arch/arm/include/asm/arch_gicv3.h

View file

diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index eee2693..1070044 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -196,6 +196,11 @@ static inline void gic_write_ctlr(u32 val)
 	isb();
 }
 
+static inline u32 gic_read_ctlr(void)
+{
+	return read_sysreg(ICC_CTLR);
+}
+
 static inline void gic_write_grpen1(u32 val)
 {
 	write_sysreg(val, ICC_IGRPEN1);

arch/arm64/Kconfig

View file

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index df02ad9..6205f52 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -556,6 +556,25 @@ config QCOM_QDF2400_ERRATUM_0065
 
 	  If unsure, say Y.
 
+
+config SOCIONEXT_SYNQUACER_PREITS
+	bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
+	default y
+	help
+	  Socionext Synquacer SoCs implement a separate h/w block to generate
+	  MSI doorbell writes with non-zero values for the device ID.
+
+	  If unsure, say Y.
+
+config HISILICON_ERRATUM_161600802
+	bool "Hip07 161600802: Erroneous redistributor VLPI base"
+	default y
+	help
+	  The HiSilicon Hip07 SoC usees the wrong redistributor base
+	  when issued ITS commands such as VMOVP and VMAPP, and requires
+	  a 128kB offset to be applied to the target address in this commands.
+
+	  If unsure, say Y.
 endmenu
 
 

arch/arm64/Kconfig.platforms

View file

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6b54ee8..1d03ef5 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -161,6 +161,9 @@ config ARCH_SEATTLE
 config ARCH_SHMOBILE
 	bool
 
+config ARCH_SYNQUACER
+	bool "Socionext SynQuacer SoC Family"
+
 config ARCH_RENESAS
 	bool "Renesas SoC Platforms"
 	select ARCH_SHMOBILE

arch/arm64/include/asm/arch_gicv3.h

View file

diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index b7e3f74..9becba9 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -87,6 +87,11 @@ static inline void gic_write_ctlr(u32 val)
 	isb();
 }
 
+static inline u32 gic_read_ctlr(void)
+{
+	return read_sysreg_s(SYS_ICC_CTLR_EL1);
+}
+
 static inline void gic_write_grpen1(u32 val)
 {
 	write_sysreg_s(val, SYS_ICC_IGRPEN1_EL1);

arch/x86/include/asm/irqdomain.h

View file

diff --git a/arch/x86/include/asm/irqdomain.h b/arch/x86/include/asm/irqdomain.h
index 423e112..e2a51ee 100644
--- a/arch/x86/include/asm/irqdomain.h
+++ b/arch/x86/include/asm/irqdomain.h
@@ -42,8 +42,8 @@ extern int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
 			      unsigned int nr_irqs, void *arg);
 extern void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
 			      unsigned int nr_irqs);
-extern void mp_irqdomain_activate(struct irq_domain *domain,
-				  struct irq_data *irq_data);
+extern int mp_irqdomain_activate(struct irq_domain *domain,
+				 struct irq_data *irq_data, bool early);
 extern void mp_irqdomain_deactivate(struct irq_domain *domain,
 				    struct irq_data *irq_data);
 extern int mp_irqdomain_ioapic_idx(struct irq_domain *domain);

arch/x86/kernel/apic/htirq.c

View file

diff --git a/arch/x86/kernel/apic/htirq.c b/arch/x86/kernel/apic/htirq.c
index 56ccf93..b07075d 100644
--- a/arch/x86/kernel/apic/htirq.c
+++ b/arch/x86/kernel/apic/htirq.c
@@ -112,8 +112,8 @@ static void htirq_domain_free(struct irq_domain *domain, unsigned int virq,
 	irq_domain_free_irqs_top(domain, virq, nr_irqs);
 }
 
-static void htirq_domain_activate(struct irq_domain *domain,
-				  struct irq_data *irq_data)
+static int htirq_domain_activate(struct irq_domain *domain,
+				 struct irq_data *irq_data, bool early)
 {
 	struct ht_irq_msg msg;
 	struct irq_cfg *cfg = irqd_cfg(irq_data);
@@ -132,6 +132,7 @@ static void htirq_domain_activate(struct irq_domain *domain,
 			HT_IRQ_LOW_MT_ARBITRATED) |
 		HT_IRQ_LOW_IRQ_MASKED;
 	write_ht_irq_msg(irq_data->irq, &msg);
+	return 0;
 }
 
 static void htirq_domain_deactivate(struct irq_domain *domain,

arch/x86/kernel/apic/io_apic.c

View file

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 3b89b27..18c8aca 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2097,7 +2097,7 @@ static inline void __init check_timer(void)
 				unmask_ioapic_irq(irq_get_irq_data(0));
 		}
 		irq_domain_deactivate_irq(irq_data);
-		irq_domain_activate_irq(irq_data);
+		irq_domain_activate_irq(irq_data, false);
 		if (timer_irq_works()) {
 			if (disable_timer_pin_1 > 0)
 				clear_IO_APIC_pin(0, pin1);
@@ -2119,7 +2119,7 @@ static inline void __init check_timer(void)
 		 */
 		replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2);
 		irq_domain_deactivate_irq(irq_data);
-		irq_domain_activate_irq(irq_data);
+		irq_domain_activate_irq(irq_data, false);
 		legacy_pic->unmask(0);
 		if (timer_irq_works()) {
 			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
@@ -2978,8 +2978,8 @@ void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
 	irq_domain_free_irqs_top(domain, virq, nr_irqs);
 }
 
-void mp_irqdomain_activate(struct irq_domain *domain,
-			   struct irq_data *irq_data)
+int mp_irqdomain_activate(struct irq_domain *domain,
+			  struct irq_data *irq_data, bool early)
 {
 	unsigned long flags;
 	struct irq_pin_list *entry;
@@ -2989,6 +2989,7 @@ void mp_irqdomain_activate(struct irq_domain *domain,
 	for_each_irq_pin(entry, data->irq_2_pin)
 		__ioapic_write_entry(entry->apic, entry->pin, data->entry);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+	return 0;
 }
 
 void mp_irqdomain_deactivate(struct irq_domain *domain,

arch/x86/platform/uv/uv_irq.c

View file

diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c
index 03fc397..5f6fd86 100644
--- a/arch/x86/platform/uv/uv_irq.c
+++ b/arch/x86/platform/uv/uv_irq.c
@@ -127,10 +127,11 @@ static void uv_domain_free(struct irq_domain *domain, unsigned int virq,
  * Re-target the irq to the specified CPU and enable the specified MMR located
  * on the specified blade to allow the sending of MSIs to the specified CPU.
  */
-static void uv_domain_activate(struct irq_domain *domain,
-			       struct irq_data *irq_data)
+static int uv_domain_activate(struct irq_domain *domain,
+			      struct irq_data *irq_data, bool early)
 {
 	uv_program_mmr(irqd_cfg(irq_data), irq_data->chip_data);
+	return 0;
 }
 
 /*

drivers/gpio/gpio-xgene-sb.c

View file

diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c
index 0332586..b5843fe 100644
--- a/drivers/gpio/gpio-xgene-sb.c
+++ b/drivers/gpio/gpio-xgene-sb.c
@@ -140,8 +140,9 @@ static int xgene_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio)
 	return irq_create_fwspec_mapping(&fwspec);
 }
 
-static void xgene_gpio_sb_domain_activate(struct irq_domain *d,
-		struct irq_data *irq_data)
+static int xgene_gpio_sb_domain_activate(struct irq_domain *d,
+					 struct irq_data *irq_data,
+					 bool early)
 {
 	struct xgene_gpio_sb *priv = d->host_data;
 	u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq);
@@ -150,11 +151,12 @@ static void xgene_gpio_sb_domain_activate(struct irq_domain *d,
 		dev_err(priv->gc.parent,
 		"Unable to configure XGene GPIO standby pin %d as IRQ\n",
 				gpio);
-		return;
+		return -ENOSPC;
 	}
 
 	xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
 			gpio * 2, 1);
+	return 0;
 }
 
 static void xgene_gpio_sb_domain_deactivate(struct irq_domain *d,

drivers/iommu/amd_iommu.c

View file

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 8e8874d..3308568 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -4173,8 +4173,8 @@ static void irq_remapping_free(struct irq_domain *domain, unsigned int virq,
 	irq_domain_free_irqs_common(domain, virq, nr_irqs);
 }
 
-static void irq_remapping_activate(struct irq_domain *domain,
-				   struct irq_data *irq_data)
+static int irq_remapping_activate(struct irq_domain *domain,
+				  struct irq_data *irq_data, bool early)
 {
 	struct amd_ir_data *data = irq_data->chip_data;
 	struct irq_2_irte *irte_info = &data->irq_2_irte;
@@ -4183,6 +4183,7 @@ static void irq_remapping_activate(struct irq_domain *domain,
 	if (iommu)
 		iommu->irte_ops->activate(data->entry, irte_info->devid,
 					  irte_info->index);
+	return 0;
 }
 
 static void irq_remapping_deactivate(struct irq_domain *domain,

drivers/iommu/intel_irq_remapping.c

View file

diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 25842b5..3241633 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -1390,12 +1390,13 @@ static void intel_irq_remapping_free(struct irq_domain *domain,
 	irq_domain_free_irqs_common(domain, virq, nr_irqs);
 }
 
-static void intel_irq_remapping_activate(struct irq_domain *domain,
-					 struct irq_data *irq_data)
+static int intel_irq_remapping_activate(struct irq_domain *domain,
+					struct irq_data *irq_data, bool early)
 {
 	struct intel_ir_data *data = irq_data->chip_data;
 
 	modify_irte(&data->irq_2_iommu, &data->irte_entry);
+	return 0;
 }
 
 static void intel_irq_remapping_deactivate(struct irq_domain *domain,

drivers/irqchip/Kconfig

View file

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index a2ca82f..53380bd 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -1,3 +1,5 @@
+menu "IRQ chip support"
+
 config IRQCHIP
 	def_bool y
 	depends on OF_IRQ
@@ -307,6 +309,7 @@ config EZNPS_GIC
 config STM32_EXTI
 	bool
 	select IRQ_DOMAIN
+	select GENERIC_IRQ_CHIP
 
 config QCOM_IRQ_COMBINER
 	bool "QCOM IRQ combiner support"
@@ -324,3 +327,13 @@ config IRQ_UNIPHIER_AIDET
 	select IRQ_DOMAIN_HIERARCHY
 	help
 	  Support for the UniPhier AIDET (ARM Interrupt Detector).
+
+config MESON_IRQ_GPIO
+       bool "Meson GPIO Interrupt Multiplexer"
+       depends on ARCH_MESON
+       select IRQ_DOMAIN
+       select IRQ_DOMAIN_HIERARCHY
+       help
+         Support Meson SoC Family GPIO Interrupt Multiplexer
+
+endmenu

drivers/irqchip/Makefile

View file

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 046df81..dae7282 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -81,3 +81,5 @@ obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
 obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
 obj-$(CONFIG_IRQ_UNIPHIER_AIDET)	+= irq-uniphier-aidet.o
+obj-$(CONFIG_ARCH_SYNQUACER)		+= irq-sni-exiu.o
+obj-$(CONFIG_MESON_IRQ_GPIO)		+= irq-meson-gpio.o

drivers/irqchip/irq-aspeed-i2c-ic.c

View file

diff --git a/drivers/irqchip/irq-aspeed-i2c-ic.c b/drivers/irqchip/irq-aspeed-i2c-ic.c
index 815b88d..f20200a 100644
--- a/drivers/irqchip/irq-aspeed-i2c-ic.c
+++ b/drivers/irqchip/irq-aspeed-i2c-ic.c
@@ -76,8 +76,8 @@ static int __init aspeed_i2c_ic_of_init(struct device_node *node,
 		return -ENOMEM;
 
 	i2c_ic->base = of_iomap(node, 0);
-	if (IS_ERR(i2c_ic->base)) {
-		ret = PTR_ERR(i2c_ic->base);
+	if (!i2c_ic->base) {
+		ret = -ENOMEM;
 		goto err_free_ic;
 	}
 

drivers/irqchip/irq-brcmstb-l2.c

View file

diff --git a/drivers/irqchip/irq-brcmstb-l2.c b/drivers/irqchip/irq-brcmstb-l2.c
index b009b91..691d20e 100644
--- a/drivers/irqchip/irq-brcmstb-l2.c
+++ b/drivers/irqchip/irq-brcmstb-l2.c
@@ -1,7 +1,7 @@
 /*
  * Generic Broadcom Set Top Box Level 2 Interrupt controller driver
  *
- * Copyright (C) 2014 Broadcom Corporation
+ * Copyright (C) 2014-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -31,35 +31,82 @@
 #include <linux/irqchip.h>
 #include <linux/irqchip/chained_irq.h>
 
-/* Register offsets in the L2 interrupt controller */
-#define CPU_STATUS	0x00
-#define CPU_SET		0x04
-#define CPU_CLEAR	0x08
-#define CPU_MASK_STATUS	0x0c
-#define CPU_MASK_SET	0x10
-#define CPU_MASK_CLEAR	0x14
+struct brcmstb_intc_init_params {
+	irq_flow_handler_t handler;
+	int cpu_status;
+	int cpu_clear;
+	int cpu_mask_status;
+	int cpu_mask_set;
+	int cpu_mask_clear;
+};
+
+/* Register offsets in the L2 latched interrupt controller */
+static const struct brcmstb_intc_init_params l2_edge_intc_init = {
+	.handler		= handle_edge_irq,
+	.cpu_status		= 0x00,
+	.cpu_clear		= 0x08,
+	.cpu_mask_status	= 0x0c,
+	.cpu_mask_set		= 0x10,
+	.cpu_mask_clear		= 0x14
+};
+
+/* Register offsets in the L2 level interrupt controller */
+static const struct brcmstb_intc_init_params l2_lvl_intc_init = {
+	.handler		= handle_level_irq,
+	.cpu_status		= 0x00,
+	.cpu_clear		= -1, /* Register not present */
+	.cpu_mask_status	= 0x04,
+	.cpu_mask_set		= 0x08,
+	.cpu_mask_clear		= 0x0C
+};
 
 /* L2 intc private data structure */
 struct brcmstb_l2_intc_data {
-	int parent_irq;
-	void __iomem *base;
 	struct irq_domain *domain;
+	struct irq_chip_generic *gc;
+	int status_offset;
+	int mask_offset;
 	bool can_wake;
 	u32 saved_mask; /* for suspend/resume */
 };
 
+/**
+ * brcmstb_l2_mask_and_ack - Mask and ack pending interrupt
+ * @d: irq_data
+ *
+ * Chip has separate enable/disable registers instead of a single mask
+ * register and pending interrupt is acknowledged by setting a bit.
+ *
+ * Note: This function is generic and could easily be added to the
+ * generic irqchip implementation if there ever becomes a will to do so.
+ * Perhaps with a name like irq_gc_mask_disable_and_ack_set().
+ *
+ * e.g.: https://patchwork.kernel.org/patch/9831047/
+ */
+static void brcmstb_l2_mask_and_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	irq_reg_writel(gc, mask, ct->regs.disable);
+	*ct->mask_cache &= ~mask;
+	irq_reg_writel(gc, mask, ct->regs.ack);
+	irq_gc_unlock(gc);
+}
+
 static void brcmstb_l2_intc_irq_handle(struct irq_desc *desc)
 {
 	struct brcmstb_l2_intc_data *b = irq_desc_get_handler_data(desc);
-	struct irq_chip_generic *gc = irq_get_domain_generic_chip(b->domain, 0);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned int irq;
 	u32 status;
 
 	chained_irq_enter(chip, desc);
 
-	status = irq_reg_readl(gc, CPU_STATUS) &
-		~(irq_reg_readl(gc, CPU_MASK_STATUS));
+	status = irq_reg_readl(b->gc, b->status_offset) &
+		~(irq_reg_readl(b->gc, b->mask_offset));
 
 	if (status == 0) {
 		raw_spin_lock(&desc->lock);
@@ -70,10 +117,8 @@ static void brcmstb_l2_intc_irq_handle(struct irq_desc *desc)
 
 	do {
 		irq = ffs(status) - 1;
-		/* ack at our level */
-		irq_reg_writel(gc, 1 << irq, CPU_CLEAR);
 		status &= ~(1 << irq);
-		generic_handle_irq(irq_find_mapping(b->domain, irq));
+		generic_handle_irq(irq_linear_revmap(b->domain, irq));
 	} while (status);
 out:
 	chained_irq_exit(chip, desc);
@@ -82,16 +127,17 @@ out:
 static void brcmstb_l2_intc_suspend(struct irq_data *d)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
 	struct brcmstb_l2_intc_data *b = gc->private;
 
 	irq_gc_lock(gc);
 	/* Save the current mask */