diff --git a/Documentation/admin-guide/binfmt-misc.rst b/Documentation/admin-guide/binfmt-misc.rst
index 95c93bb..7a86413 100644
--- a/Documentation/admin-guide/binfmt-misc.rst
+++ b/Documentation/admin-guide/binfmt-misc.rst
@@ -140,8 +140,8 @@ Hints
 -----
 
 If you want to pass special arguments to your interpreter, you can
-write a wrapper script for it. See Documentation/admin-guide/java.rst for an
-example.
+write a wrapper script for it.
+See :doc:`Documentation/admin-guide/java.rst <./java>` for an example.
 
 Your interpreter should NOT look in the PATH for the filename; the kernel
 passes it the full filename (or the file descriptor) to use.  Using ``$PATH`` can
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
index 66d3e40..fb44c29 100644
--- a/arch/sh/include/mach-common/mach/highlander.h
+++ b/arch/sh/include/mach-common/mach/highlander.h
@@ -18,7 +18,7 @@
 #define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
 #define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
 #define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
-#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_PCICD        (PA_BCR+0x0010) /* PCI Connector detect control */
 #define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
 #define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
 #define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
@@ -80,7 +80,7 @@
 #define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
 #define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
 #define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
-#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
+#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Connector detect control */
 #define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
 #define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
 #define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
diff --git a/arch/x86/boot/apm.c b/arch/x86/boot/apm.c
index b72fc10..bda15f9 100644
--- a/arch/x86/boot/apm.c
+++ b/arch/x86/boot/apm.c
@@ -60,7 +60,7 @@ int query_apm_bios(void)
 	intcall(0x15, &ireg, &oreg);
 
 	if ((oreg.eflags & X86_EFLAGS_CF) || oreg.bx != 0x504d) {
-		/* Failure with 32-bit connect, try to disconect and ignore */
+		/* Failure with 32-bit connect, try to disconnect and ignore */
 		ireg.al = 0x04;
 		intcall(0x15, &ireg, NULL);
 		return -1;
diff --git a/block/blk-mq-virtio.c b/block/blk-mq-virtio.c
index 4883416..7b8a42c 100644
--- a/block/blk-mq-virtio.c
+++ b/block/blk-mq-virtio.c
@@ -16,7 +16,7 @@
  * @first_vec:	first interrupt vectors to use for queues (usually 0)
  *
  * This function assumes the virtio device @vdev has at least as many available
- * interrupt vetors as @set has queues.  It will then queuery the vector
+ * interrupt vectors as @set has queues.  It will then query the vector
  * corresponding to each queue for it's affinity mask and built queue mapping
  * that maps a queue to the CPUs that have irq affinity for the corresponding
  * vector.
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
index e55884d..52a858c 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
@@ -677,7 +677,7 @@ static uint64_t sdma_v4_0_ring_get_wptr(struct amdgpu_ring *ring)
 }
 
 /**
- * sdma_v4_0_ring_set_wptr - commit the write pointer
+ * sdma_v4_0_page_ring_set_wptr - commit the write pointer
  *
  * @ring: amdgpu ring pointer
  *
@@ -977,7 +977,7 @@ static void sdma_v4_0_page_stop(struct amdgpu_device *adev)
 }
 
 /**
- * sdma_v_0_ctx_switch_enable - stop the async dma engines context switch
+ * sdma_v4_0_ctx_switch_enable - stop the async dma engines context switch
  *
  * @adev: amdgpu_device pointer
  * @enable: enable/disable the DMA MEs context switch.
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 494a39e..5d1b77d 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1039,7 +1039,7 @@ config HID_U2FZERO
 
 	  U2F Zero only supports blinking its LED, so this driver doesn't
 	  allow setting the brightness to anything but 1, which will
-	  trigger a single blink and immediately reset to back 0.
+	  trigger a single blink and immediately reset back to 0.
 
 config HID_WACOM
 	tristate "Wacom Intuos/Graphire tablet support (USB)"
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index ee73b06..4691a3c 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -1987,7 +1987,7 @@ dasd_3990_erp_compound_code(struct dasd_ccw_req * erp, char *sense)
  * DASD_3990_ERP_COMPOUND_CONFIG
  *
  * DESCRIPTION
- *   Handles the compound ERP action for configruation
+ *   Handles the compound ERP action for configuration
  *   dependent error.
  *   Note: duplex handling is not implemented (yet).
  *
diff --git a/include/linux/err.h b/include/linux/err.h
index 87be243..a139c64 100644
--- a/include/linux/err.h
+++ b/include/linux/err.h
@@ -62,9 +62,6 @@ static inline int __must_check PTR_ERR_OR_ZERO(__force const void *ptr)
 		return 0;
 }
 
-/* Deprecated */
-#define PTR_RET(p) PTR_ERR_OR_ZERO(p)
-
 #endif
 
 #endif /* _LINUX_ERR_H */
diff --git a/include/linux/hashtable.h b/include/linux/hashtable.h
index 417d2c4..78b6ea5 100644
--- a/include/linux/hashtable.h
+++ b/include/linux/hashtable.h
@@ -145,7 +145,7 @@ static inline void hash_del_rcu(struct hlist_node *node)
  * hash entry
  * @name: hashtable to iterate
  * @bkt: integer to use as bucket loop cursor
- * @tmp: a &struct used for temporary storage
+ * @tmp: a &struct hlist_node used for temporary storage
  * @obj: the type * to use as a loop cursor for each entry
  * @member: the name of the hlist_node within the struct
  */
@@ -197,7 +197,7 @@ static inline void hash_del_rcu(struct hlist_node *node)
  * same bucket safe against removals
  * @name: hashtable to iterate
  * @obj: the type * to use as a loop cursor for each entry
- * @tmp: a &struct used for temporary storage
+ * @tmp: a &struct hlist_node used for temporary storage
  * @member: the name of the hlist_node within the struct
  * @key: the key of the objects to iterate over
  */
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index d6e2ab5..8f2820c 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -24,7 +24,7 @@ struct pt_regs;
  * @handle_irq:		highlevel irq-events handler
  * @preflow_handler:	handler called before the flow handler (currently used by sparc)
  * @action:		the irq action chain
- * @status:		status information
+ * @status_use_accessors: status information
  * @core_internal_state__do_not_mess_with_it: core internal status information
  * @depth:		disable-depth, for nested irq_disable() calls
  * @wake_depth:		enable depth, for multiple irq_set_irq_wake() callers
diff --git a/include/linux/list.h b/include/linux/list.h
index 884216d..aff44d3 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -989,7 +989,7 @@ static inline void hlist_move_list(struct hlist_head *old,
 /**
  * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
  * @pos:	the type * to use as a loop cursor.
- * @n:		another &struct hlist_node to use as temporary storage
+ * @n:		a &struct hlist_node to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
  */
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 81e7dcb..6e2962e 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -33,7 +33,7 @@ struct wm8994_ldo_pdata {
  * DRC configurations are specified with a label and a set of register
  * values to write (the enable bits will be ignored).  At runtime an
  * enumerated control will be presented for each DRC block allowing
- * the user to choose the configration to use.
+ * the user to choose the configuration to use.
  *
  * Configurations may be generated by hand or by using the DRC control
  * panel provided by the WISCE - see  http://www.wolfsonmicro.com/wisce/
