diff --git a/MAINTAINERS b/MAINTAINERS index 992fe3b..2b70b8d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3411,7 +3411,7 @@ F: Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml F: drivers/pci/controller/pcie-brcmstb.c F: drivers/staging/vc04_services N: bcm2711 -N: bcm2835 +N: bcm283* BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE M: Florian Fainelli diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 861e05d..343364d 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -16,6 +16,13 @@ stdout-path = &uart1; }; + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + mmc2 = &usdhc4; + /delete-property/ mmc3; + }; + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x80000000>; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 736074f..959d8ac 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -418,7 +418,7 @@ /* VDD_AUD_1P8: Audio codec */ reg_aud_1p8v: ldo3 { - regulator-name = "vdd1p8"; + regulator-name = "vdd1p8a"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index d6df598..b167b33 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -137,7 +137,7 @@ lcd_backlight: lcd-backlight { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; pwm-names = "LCD_BKLT_PWM"; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; @@ -167,7 +167,7 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; - status = "disabld"; + status = "disabled"; }; i2c_cam: i2c-gpio-cam { @@ -179,7 +179,7 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; - status = "disabld"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index b065778..7e4e5fd 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,7 +53,6 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; - phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; @@ -63,10 +62,19 @@ #address-cells = <1>; #size-cells = <0>; - phy: ethernet-phy@0 { + /* + * The PHY can appear at either address 0 or 4 due to the + * configuration (LED) pin not being pulled sufficiently. + */ + ethernet-phy@0 { reg = <0>; qca,clk-out-frequency = <125000000>; }; + + ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + }; }; }; diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts index 84b0952..bd6b528 100644 --- a/arch/arm/boot/dts/imx7d-flex-concentrator.dts +++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts @@ -115,6 +115,7 @@ compatible = "nxp,pcf2127"; reg = <0>; spi-max-frequency = <2000000>; + reset-source; }; }; diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi index d309fad..344d298 100644 --- a/arch/arm/boot/dts/ste-db8500.dtsi +++ b/arch/arm/boot/dts/ste-db8500.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi index 48bd872..287804e 100644 --- a/arch/arm/boot/dts/ste-db8520.dtsi +++ b/arch/arm/boot/dts/ste-db8520.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-db9500.dtsi b/arch/arm/boot/dts/ste-db9500.dtsi new file mode 100644 index 0000000..0afff70 --- /dev/null +++ b/arch/arm/boot/dts/ste-db9500.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "ste-dbx5x0.dtsi" + +/ { + cpus { + cpu@300 { + /* cpufreq controls */ + operating-points = <1152000 0 + 800000 0 + 400000 0 + 200000 0>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index be90e73..27d8a07 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "ste-db8500.dtsi" +#include "ste-db9500.dtsi" #include "ste-href-ab8500.dtsi" #include "ste-href-family-pinctrl.dtsi" diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 1eabf2d..e06f946 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -67,6 +67,7 @@ #define MX6Q_CCM_CCR 0x0 .align 3 + .arm .macro sync_l2_cache diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi index aef8f2b..5401a64 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi @@ -4,11 +4,16 @@ */ usb { compatible = "simple-bus"; - dma-ranges; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>; + /* + * Internally, USB bus to the interconnect can only address up + * to 40-bit + */ + dma-ranges = <0 0 0 0 0x100 0x0>; + usbphy0: usb-phy@0 { compatible = "brcm,sr-usb-combo-phy"; reg = <0x0 0x00000000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 60ff19f..6c8a61c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -101,7 +101,7 @@ reboot { compatible ="syscon-reboot"; regmap = <&rst>; - offset = <0xb0>; + offset = <0>; mask = <0x02>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index ee17902..2a79e89 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -253,7 +253,7 @@ #size-cells = <1>; ranges; - spba: bus@30000000 { + spba: spba-bus@30000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index ecccfbb..23f5a5e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -266,7 +266,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 0 144 4>; + gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 26 144 4>; }; gpio4: gpio@30230000 { diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 8383016..a0bcf02 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -991,8 +991,6 @@ CONFIG_ARCH_TEGRA_210_SOC=y CONFIG_ARCH_TEGRA_186_SOC=y CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_TEGRA_234_SOC=y -CONFIG_ARCH_K3_AM6_SOC=y -CONFIG_ARCH_K3_J721E_SOC=y CONFIG_TI_SCI_PM_DOMAINS=y CONFIG_EXTCON_PTN5150=m CONFIG_EXTCON_USB_GPIO=y diff --git a/drivers/bus/arm-integrator-lm.c b/drivers/bus/arm-integrator-lm.c index 845b6c4..2344d56 100644 --- a/drivers/bus/arm-integrator-lm.c +++ b/drivers/bus/arm-integrator-lm.c @@ -54,6 +54,7 @@ static int integrator_lm_populate(int num, struct device *dev) ret = of_platform_default_populate(child, NULL, dev); if (ret) { dev_err(dev, "failed to populate module\n"); + of_node_put(child); return ret; } } diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig index 1d2e5b8..c027d99 100644 --- a/drivers/firmware/imx/Kconfig +++ b/drivers/firmware/imx/Kconfig @@ -13,6 +13,7 @@ config IMX_DSP config IMX_SCU bool "IMX SCU Protocol driver" depends on IMX_MBOX + select SOC_BUS help The System Controller Firmware (SCFW) is a low-level system function which runs on a dedicated Cortex-M core to provide power, clock, and diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c index c4472b6..698d21f 100644 --- a/drivers/soc/atmel/soc.c +++ b/drivers/soc/atmel/soc.c @@ -271,8 +271,21 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs) return soc_dev; } +static const struct of_device_id at91_soc_allowed_list[] __initconst = { + { .compatible = "atmel,at91rm9200", }, + { .compatible = "atmel,at91sam9", }, + { .compatible = "atmel,sama5", }, + { .compatible = "atmel,samv7", }, + { } +}; + static int __init atmel_soc_device_init(void) { + struct device_node *np = of_find_node_by_path("/"); + + if (!of_match_node(at91_soc_allowed_list, np)) + return 0; + at91_soc_init(socs); return 0; diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig index a9370f4..05812f8 100644 --- a/drivers/soc/imx/Kconfig +++ b/drivers/soc/imx/Kconfig @@ -13,7 +13,7 @@ config SOC_IMX8M depends on ARCH_MXC || COMPILE_TEST default ARCH_MXC && ARM64 select SOC_BUS - select ARM_GIC_V3 if ARCH_MXC + select ARM_GIC_V3 if ARCH_MXC && ARCH_MULTI_V7 help If you say yes here you get support for the NXP i.MX8M family support, it will provide the SoC info like SoC family, diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c index c981757..780d7c4 100644 --- a/drivers/tee/optee/call.c +++ b/drivers/tee/optee/call.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -148,7 +149,8 @@ u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg) */ optee_cq_wait_for_completion(&optee->call_queue, &w); } else if (OPTEE_SMC_RETURN_IS_RPC(res.a0)) { - might_sleep(); + if (need_resched()) + cond_resched(); param.a0 = res.a0; param.a1 = res.a1; param.a2 = res.a2;