projects/linux·commit 75a442ef

Merge branch 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

75a442ef · Linus Torvalds <[email protected]> · 2016-07-26 14:39:40 -07:00

Pull libata updates from Tejun Heo:
 "libata saw quite a bit of activities in this cycle:

   - SMR drive support still being worked on

   - bug fixes and improvements to misc SCSI command emulation

   - some low level driver updates"

* 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits)
  libata-scsi: better style in ata_msense_*()
  AHCI: Clear GHC.IS to prevent unexpectly asserting INTx
  ata: sata_dwc_460ex: remove redundant dev_err call
  ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_*
  libata: remove ATA_PROT_FLAG_DATA
  libata: remove ata_is_nodata
  ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48}
  libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat
  libata-scsi: Fix ZBC management out command translation
  libata-scsi: Fix translation of REPORT ZONES command
  ata: Handle ATA NCQ NO-DATA commands correctly
  libata-eh: decode all taskfile protocols
  ata: fixup ATA_PROT_NODATA
  libsas: use ata_is_ncq() and ata_has_dma() accessors
  libata: use ata_is_ncq() accessors
  libata: return boolean values from ata_is_*
  libata-scsi: avoid repeated calculation of number of TRIM ranges
  libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit
  libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control()
  libata-scsi: fix D_SENSE bit relection in control mode page
  ...
Commit
75a442efb1ca613f8d1cc71a32c2c9b0aefae4a5
Parents
b55b0487 · 737bee93

Merge commit. Changes below are compared with the first parent: b55b0487.

Changes

24 files changed · +314 −153

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt

View file
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
similarity index 94%
rename from Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
rename to Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
index 6087283..0a5b3b4 100644
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
@@ -1,13 +1,14 @@
-* Broadcom SATA3 AHCI Controller for STB
+* Broadcom SATA3 AHCI Controller
SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
- compatible : should be one or more of
- "brcm,bcm7425-ahci"
- "brcm,bcm7445-ahci"
- "brcm,sata3-ahci"
+ "brcm,bcm7425-ahci"
+ "brcm,bcm7445-ahci"
+ "brcm,bcm-nsp-ahci"
+ "brcm,sata3-ahci"
- reg : register mappings for AHCI and SATA_TOP_CTRL
- reg-names : "ahci" and "top-ctrl"
- interrupts : interrupt mapping for SATA IRQ

Documentation/devicetree/bindings/phy/brcm-sata-phy.txt

View file
diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
index d023120..6ccce09 100644
--- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
@@ -5,6 +5,7 @@ Required properties:
"brcm,bcm7425-sata-phy"
"brcm,bcm7445-sata-phy"
"brcm,iproc-ns2-sata-phy"
+ "brcm,iproc-nsp-sata-phy"
"brcm,phy-sata3"
- address-cells: should be 1
- size-cells: should be 0
@@ -22,7 +23,8 @@ Sub-nodes required properties:
Sub-nodes optional properties:
- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
- This property is not applicable for "brcm,iproc-ns2-sata-phy".
+ This property is not applicable for "brcm,iproc-ns2-sata-phy" and
+ "brcm,iproc-nsp-sata-phy".
Example:
sata-phy@f0458100 {

MAINTAINERS

View file
diff --git a/MAINTAINERS b/MAINTAINERS
index 531c600..9987f84 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6768,6 +6768,7 @@ S: Maintained
F: drivers/ata/
F: include/linux/ata.h
F: include/linux/libata.h
+F: Documentation/devicetree/bindings/ata/
LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
M: Viresh Kumar <[email protected]>

arch/arm/boot/dts/bcm-nsp.dtsi

View file
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 1ed829e..6a40ed7 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -271,6 +271,48 @@
<0x30028 0x04>,
<0x3f408 0x04>;
};
+
+ sata_phy: sata_phy@40100 {
+ compatible = "brcm,iproc-nsp-sata-phy";
+ reg = <0x40100 0x340>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ sata: ahci@41000 {
+ compatible = "brcm,bcm-nsp-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x41000 0x1000>, <0x40020 0x1c>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ phy-names = "sata-phy";
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ phy-names = "sata-phy";
+ };
+ };
};
pcie0: pcie@18012000 {

arch/arm/boot/dts/bcm958625k.dts

View file
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index e298450..2d84226 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -68,6 +68,18 @@
status = "okay";
};
+&sata_phy0 {
+ status = "okay";
+};
+
+&sata_phy1 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";

drivers/ata/Kconfig

View file
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e2dc4c0..2c8be74 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -98,12 +98,12 @@ config SATA_AHCI_PLATFORM
If unsure, say N.
-config AHCI_BRCMSTB
- tristate "Broadcom STB AHCI SATA support"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC
+config AHCI_BRCM
+ tristate "Broadcom AHCI SATA support"
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
help
This option enables support for the AHCI SATA3 controller found on
- STB SoC's.
+ Broadcom SoC's.
If unsure, say N.

drivers/ata/Makefile

View file
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 0b2afb7..a46e6b7 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
-obj-$(CONFIG_AHCI_BRCMSTB) += ahci_brcmstb.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_BRCM) += ahci_brcm.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o

drivers/ata/ahci.c

View file
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a83bbcc..90eabaf 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -580,7 +580,7 @@ static struct pci_driver ahci_pci_driver = {
},
};
-#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+#if IS_ENABLED(CONFIG_PATA_MARVELL)
static int marvell_enable;
#else
static int marvell_enable = 1;

drivers/ata/ahci_brcm.c

View file
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcm.c
similarity index 89%
rename from drivers/ata/ahci_brcmstb.c
rename to drivers/ata/ahci_brcm.c
index e87bcec..6f8a734 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcm.c
@@ -71,6 +71,12 @@
(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
+enum brcm_ahci_version {
+ BRCM_SATA_BCM7425 = 1,
+ BRCM_SATA_BCM7445,
+ BRCM_SATA_NSP,
+};
+
enum brcm_ahci_quirks {
BRCM_AHCI_QUIRK_NO_NCQ = BIT(0),
BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
@@ -81,6 +87,7 @@ struct brcm_ahci_priv {
void __iomem *top_ctrl;
u32 port_mask;
u32 quirks;
+ enum brcm_ahci_version version;
};
static const struct ata_port_info ahci_brcm_port_info = {
@@ -247,9 +254,19 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
static void brcm_sata_init(struct brcm_ahci_priv *priv)
{
+ void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
+
/* Configure endianness */
- brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
- priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+ if (priv->version == BRCM_SATA_NSP) {
+ u32 data = brcm_sata_readreg(ctrl);
+
+ data &= ~((0x03 << DMADATA_ENDIAN_SHIFT) |
+ (0x03 << DMADESC_ENDIAN_SHIFT));
+ data |= (0x02 << DMADATA_ENDIAN_SHIFT) |
+ (0x02 << DMADESC_ENDIAN_SHIFT);
+ brcm_sata_writereg(data, ctrl);
+ } else
+ brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF, ctrl);
}
#ifdef CONFIG_PM_SLEEP
@@ -282,8 +299,17 @@ static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
+static const struct of_device_id ahci_of_match[] = {
+ {.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
+ {.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
+ {.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
static int brcm_ahci_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id;
struct device *dev = &pdev->dev;
struct brcm_ahci_priv *priv;
struct ahci_host_priv *hpriv;
@@ -293,6 +319,12 @@ static int brcm_ahci_probe(struct platform_device *pdev)
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+
+ of_id = of_match_node(ahci_of_match, pdev->dev.of_node);
+ if (!of_id)
+ return -ENODEV;
+
+ priv->version = (enum brcm_ahci_version)of_id->data;
priv->dev = dev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
@@ -300,7 +332,8 @@ static int brcm_ahci_probe(struct platform_device *pdev)
if (IS_ERR(priv->top_ctrl))
return PTR_ERR(priv->top_ctrl);
- if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) {
+ if ((priv->version == BRCM_SATA_BCM7425) ||
+ (priv->version == BRCM_SATA_NSP)) {
priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
}
@@ -354,13 +387,6 @@ static int brcm_ahci_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id ahci_of_match[] = {
- {.compatible = "brcm,bcm7425-ahci"},
- {.compatible = "brcm,bcm7445-ahci"},
- {},
-};
-MODULE_DEVICE_TABLE(of, ahci_of_match);
-
static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
static struct platform_driver brcm_ahci_driver = {

drivers/ata/libahci.c

View file
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 71b0719..7461a58 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1975,7 +1975,7 @@ unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
*/
pp->active_link = qc->dev->link;
- if (qc->tf.protocol == ATA_PROT_NCQ)
+ if (ata_is_ncq(qc->tf.protocol))
writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
@@ -2392,12 +2392,20 @@ static int ahci_port_start(struct ata_port *ap)
static void ahci_port_stop(struct ata_port *ap)
{
const char *emsg = NULL;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *host_mmio = hpriv->mmio;
int rc;
/* de-initialize port */
rc = ahci_deinit_port(ap, &emsg);
if (rc)
ata_port_warn(ap, "%s (%d)\n", emsg, rc);
+
+ /*
+ * Clear GHC.IS to prevent stuck INTx after disabling MSI and
+ * re-enabling INTx.
+ */
+ writel(1 << ap->port_no, host_mmio + HOST_IRQ_STAT);
}
void ahci_print_info(struct ata_host *host, const char *scc_s)

drivers/ata/libata-core.c

View file
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 31c183a..67339b4 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1238,7 +1238,7 @@ static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors)
} else
tf.command = ATA_CMD_READ_NATIVE_MAX;
- tf.protocol |= ATA_PROT_NODATA;
+ tf.protocol = ATA_PROT_NODATA;
tf.device |= ATA_LBA;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
@@ -1297,7 +1297,7 @@ static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors)
tf.device |= (new_sectors >> 24) & 0xf;
}
- tf.protocol |= ATA_PROT_NODATA;
+ tf.protocol = ATA_PROT_NODATA;
tf.device |= ATA_LBA;
tf.lbal = (new_sectors >> 0) & 0xff;
@@ -4848,7 +4848,7 @@ int ata_std_qc_defer(struct ata_queued_cmd *qc)
{
struct ata_link *link = qc->dev->link;
- if (qc->tf.protocol == ATA_PROT_NCQ) {
+ if (ata_is_ncq(qc->tf.protocol)) {
if (!ata_tag_valid(link->active_tag))
return 0;
} else {
@@ -5013,7 +5013,7 @@ void __ata_qc_complete(struct ata_queued_cmd *qc)
ata_sg_clean(qc);
/* command should be marked inactive atomically with qc completion */
- if (qc->tf.protocol == ATA_PROT_NCQ) {
+ if (ata_is_ncq(qc->tf.protocol)) {
link->sactive &= ~(1 << qc->tag);
if (!link->sactive)
ap->nr_active_links--;
@@ -5050,7 +5050,7 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc)
{
struct ata_device *dev = qc->dev;
- if (ata_is_nodata(qc->tf.protocol))
+ if (!ata_is_data(qc->tf.protocol))
return;
if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol))
@@ -5133,7 +5133,9 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
switch (qc->tf.command) {
case ATA_CMD_SET_FEATURES:
if (qc->tf.feature != SETFEATURES_WC_ON &&
- qc->tf.feature != SETFEATURES_WC_OFF)
+ qc->tf.feature != SETFEATURES_WC_OFF &&
+ qc->tf.feature != SETFEATURES_RA_ON &&
+ qc->tf.feature != SETFEATURES_RA_OFF)
break;
/* fall through */
case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */

drivers/ata/libata-eh.c

View file
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index c6f0174..0e1ec37 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2607,9 +2607,13 @@ static void ata_eh_link_report(struct ata_link *link)
[DMA_FROM_DEVICE] = "in",
};
static const char *prot_str[] = {
+ [ATA_PROT_UNKNOWN] = "unknown",
+ [ATA_PROT_NODATA] = "nodata",
[ATA_PROT_PIO] = "pio",
[ATA_PROT_DMA] = "dma",
- [ATA_PROT_NCQ] = "ncq",
+ [ATA_PROT_NCQ] = "ncq dma",
+ [ATA_PROT_NCQ_NODATA] = "ncq nodata",
+ [ATAPI_PROT_NODATA] = "nodata",
[ATAPI_PROT_PIO] = "pio",
[ATAPI_PROT_DMA] = "dma",
};
@@ -3177,7 +3181,7 @@ static void ata_eh_park_issue_cmd(struct ata_device *dev, int park)
}
tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
- tf.protocol |= ATA_PROT_NODATA;
+ tf.protocol = ATA_PROT_NODATA;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
if (park && (err_mask || tf.lbal != 0xc4)) {
ata_dev_err(dev, "head unload failed!\n");

drivers/ata/libata-scsi.c

View file
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index bfec66f..2bdb5da 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -304,7 +304,7 @@ static void ata_scsi_set_invalid_field(struct ata_device *dev,
struct scsi_cmnd *cmd, u16 field, u8 bit)
{
ata_scsi_set_sense(dev, cmd, ILLEGAL_REQUEST, 0x24, 0x0);
- /* "Invalid field in cbd" */
+ /* "Invalid field in CDB" */
scsi_set_sense_field_pointer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
field, bit, 1);
}
@@ -2075,8 +2075,8 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
0x03,
0x20, /* SBC-2 (no version claimed) */
- 0x02,
- 0x60 /* SPC-3 (no version claimed) */
+ 0x03,
+ 0x00 /* SPC-3 (no version claimed) */
};
const u8 versions_zbc[] = {
0x00,
@@ -2097,7 +2097,10 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
0,
0x5, /* claim SPC-3 version compatibility */
2,
- 95 - 4
+ 95 - 4,
+ 0,
+ 0,
+ 2
};
VPRINTK("ENTER\n");
@@ -2109,8 +2112,10 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
(args->dev->link->ap->pflags & ATA_PFLAG_EXTERNAL))
hdr[1] |= (1 << 7);
- if (args->dev->class == ATA_DEV_ZAC)
+ if (args->dev->class == ATA_DEV_ZAC) {
hdr[0] = TYPE_ZBC;
+ hdr[2] = 0x7; /* claim SPC-5 version compatibility */
+ }
memcpy(rbuf, hdr, sizeof(hdr));
memcpy(&rbuf[8], "ATA ", 8);
@@ -2314,7 +2319,7 @@ static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf)
* with the unmap bit set.
*/
if (ata_id_has_trim(args->id)) {
- put_unaligned_be64(65535 * 512 / 8, &rbuf[36]);
+ put_unaligned_be64(65535 * ATA_MAX_TRIM_RNUM, &rbuf[36]);
put_unaligned_be32(1, &rbuf[28]);
}
@@ -2424,15 +2429,17 @@ static void modecpy(u8 *dest, const u8 *src, int n, bool changeable)
static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable)
{
modecpy(buf, def_cache_mpage, sizeof(def_cache_mpage), changeable);
- if (changeable || ata_id_wcache_enabled(id))
- buf[2] |= (1 << 2); /* write cache enable */
- if (!changeable && !ata_id_rahead_enabled(id))
- buf[12] |= (1 << 5); /* disable read ahead */
+ if (changeable) {
+ buf[2] |= (1 << 2); /* ata_mselect_caching() */
+ } else {
+ buf[2] |= (ata_id_wcache_enabled(id) << 2); /* write cache enable */
+ buf[12] |= (!ata_id_rahead_enabled(id) << 5); /* disable read ahead */
+ }
return sizeof(def_cache_mpage);
}
/**
- * ata_msense_ctl_mode - Simulate MODE SENSE control mode page
+ * ata_msense_control - Simulate MODE SENSE control mode page
* @dev: ATA device of interest
* @buf: output buffer
* @changeable: whether changeable parameters are requested
@@ -2442,12 +2449,17 @@ static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable)
* LOCKING:
* None.
*/
-static unsigned int ata_msense_ctl_mode(struct ata_device *dev, u8 *buf,
+static unsigned int ata_msense_control(struct ata_device *dev, u8 *buf,
bool changeable)
{
modecpy(buf, def_control_mpage, sizeof(def_control_mpage), changeable);
- if (changeable && (dev->flags & ATA_DFLAG_D_SENSE))
- buf[2] |= (1 << 2); /* Descriptor sense requested */
+ if (changeable) {
+ buf[2] |= (1 << 2); /* ata_mselect_control() */
+ } else {
+ bool d_sense = (dev->flags & ATA_DFLAG_D_SENSE);
+
+ buf[2] |= (d_sense << 2); /* descriptor format sense data */
+ }
return sizeof(def_control_mpage);
}
@@ -2566,13 +2578,13 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf)
break;
case CONTROL_MPAGE:
- p += ata_msense_ctl_mode(args->dev, p, page_control == 1);
+ p += ata_msense_control(args->dev, p, page_control == 1);
break;
case ALL_MPAGES:
p += ata_msense_rw_recovery(p, page_control == 1);
p += ata_msense_caching(args->id, p, page_control == 1);
- p += ata_msense_ctl_mode(args->dev, p, page_control == 1);
+ p += ata_msense_control(args->dev, p, page_control == 1);
break;
default: /* invalid page code */
@@ -3077,6 +3089,9 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
goto invalid_fld;
}
+ if (ata_is_ncq(tf->protocol) && (cdb[2] & 0x3) == 0)
+ tf->protocol = ATA_PROT_NCQ_NODATA;
+
/* enable LBA */
tf->flags |= ATA_TFLAG_LBA;
@@ -3125,8 +3140,8 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
tf->command = cdb[9];
}
- /* For NCQ commands with FPDMA protocol, copy the tag value */
- if (tf->protocol == ATA_PROT_NCQ)
+ /* For NCQ commands copy the tag value */
+ if (ata_is_ncq(tf->protocol))
tf->nsect = qc->tag << 3;
/* enforce correct master/slave bit */
@@ -3305,7 +3320,13 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
goto invalid_param_len;
buf = page_address(sg_page(scsi_sglist(scmd)));
- size = ata_set_lba_range_entries(buf, 512, block, n_block);
+
+ if (n_block <= 65535 * ATA_MAX_TRIM_RNUM) {
+ size = ata_set_lba_range_entries(buf, ATA_MAX_TRIM_RNUM, block, n_block);
+ } else {
+ fp = 2;
+ goto invalid_fld;
+ }
if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
/* Newer devices support queued TRIM commands */
@@ -3454,7 +3475,7 @@ static unsigned int ata_scsi_zbc_in_xlat(struct ata_queued_cmd *qc)
goto invalid_param_len;
}
sect = n_block / 512;
- options = cdb[14];
+ options = cdb[14] & 0xbf;
if (ata_ncq_enabled(qc->dev) &&
ata_fpdma_zac_mgmt_in_supported(qc->dev)) {
@@ -3464,7 +3485,7 @@ static unsigned int ata_scsi_zbc_in_xlat(struct ata_queued_cmd *qc)
tf->nsect = qc->tag << 3;
tf->feature = sect & 0xff;
tf->hob_feature = (sect >> 8) & 0xff;
- tf->auxiliary = ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES;
+ tf->auxiliary = ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES | (options << 8);
} else {
tf->command = ATA_CMD_ZAC_MGMT_IN;
tf->feature = ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES;
@@ -3506,7 +3527,7 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc)
struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
const u8 *cdb = scmd->cmnd;
- u8 reset_all, sa;
+ u8 all, sa;
u64 block;
u32 n_block;
u16 fp = (u16)-1;
@@ -3533,20 +3554,20 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc)
if (block > dev->n_sectors)
goto out_of_range;
- reset_all = cdb[14] & 0x1;
+ all = cdb[14] & 0x1;
if (ata_ncq_enabled(qc->dev) &&
ata_fpdma_zac_mgmt_out_supported(qc->dev)) {
- tf->protocol = ATA_PROT_NCQ;

This diff is incomplete. Download the complete patch.

drivers/ata/libata-transport.c

View file

This diff is incomplete. Download the complete patch.

drivers/ata/pata_arasan_cf.c

View file

This diff is incomplete. Download the complete patch.

drivers/ata/pata_atiixp.c

View file

This diff is incomplete. Download the complete patch.

drivers/ata/pata_hpt366.c

View file

This diff is incomplete. Download the complete patch.

drivers/ata/pata_marvell.c

View file

This diff is incomplete. Download the complete patch.

drivers/ata/sata_dwc_460ex.c

View file

This diff is incomplete. Download the complete patch.

drivers/phy/phy-brcm-sata.c

View file

This diff is incomplete. Download the complete patch.

drivers/scsi/libsas/sas_ata.c

View file

This diff is incomplete. Download the complete patch.

include/linux/ata.h

View file

This diff is incomplete. Download the complete patch.

include/linux/libata.h

View file

This diff is incomplete. Download the complete patch.

include/trace/events/libata.h

View file

This diff is incomplete. Download the complete patch.