diff --git a/MAINTAINERS b/MAINTAINERS
index 1bf9e71..43ba66d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9082,6 +9082,12 @@ L:	linux-input@vger.kernel.org
 S:	Supported
 F:	drivers/hid/hid-playstation.c
 
+HID PHOENIX RC FLIGHT CONTROLLER
+M:	Marcus Folkesson <marcus.folkesson@gmail.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/hid/hid-pxrc.c
+
 HID SENSOR HUB DRIVERS
 M:	Jiri Kosina <jikos@kernel.org>
 M:	Jonathan Cameron <jic23@kernel.org>
@@ -9094,6 +9100,12 @@ F:	drivers/hid/hid-sensor-*
 F:	drivers/iio/*/hid-*
 F:	include/linux/hid-sensor-*
 
+HID VRC-2 CAR CONTROLLER DRIVER
+M:	Marcus Folkesson <marcus.folkesson@gmail.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/hid/hid-vrc2.c
+
 HID WACOM DRIVER
 M:	Ping Cheng <ping.cheng@wacom.com>
 M:	Jason Gerecke  <jason.gerecke@wacom.com>
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 6ce9283..185a077 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -28,7 +28,6 @@ if HID
 
 config HID_BATTERY_STRENGTH
 	bool "Battery level reporting for HID devices"
-	depends on HID
 	select POWER_SUPPLY
 	default n
 	help
@@ -38,7 +37,6 @@ config HID_BATTERY_STRENGTH
 
 config HIDRAW
 	bool "/dev/hidraw raw HID device support"
-	depends on HID
 	help
 	Say Y here if you want to support HID devices (from the USB
 	specification standpoint) that aren't strictly user interface
@@ -57,7 +55,6 @@ config HIDRAW
 
 config UHID
 	tristate "User-space I/O driver support for HID subsystem"
-	depends on HID
 	default n
 	help
 	Say Y here if you want to provide HID I/O Drivers from user-space.
@@ -78,7 +75,6 @@ config UHID
 
 config HID_GENERIC
 	tristate "Generic HID driver"
-	depends on HID
 	default HID
 	help
 	Support for generic devices on the HID bus. This includes most
@@ -90,11 +86,9 @@ config HID_GENERIC
 	If unsure, say Y.
 
 menu "Special HID drivers"
-	depends on HID
 
 config HID_A4TECH
 	tristate "A4TECH mice"
-	depends on HID
 	default !EXPERT
 	help
 	Support for some A4TECH mice with two scroll wheels.
@@ -113,7 +107,6 @@ config HID_ACCUTOUCH
 
 config HID_ACRUX
 	tristate "ACRUX game controller support"
-	depends on HID
 	help
 	Say Y here if you want to enable support for ACRUX game controllers.
 
@@ -127,7 +120,6 @@ config HID_ACRUX_FF
 
 config HID_APPLE
 	tristate "Apple {i,Power,Mac}Books"
-	depends on HID
 	depends on LEDS_CLASS
 	depends on NEW_LEDS
 	default !EXPERT
@@ -167,13 +159,11 @@ config HID_ASUS
 
 config HID_AUREAL
 	tristate "Aureal"
-	depends on HID
 	help
 	Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
 
 config HID_BELKIN
 	tristate "Belkin Flip KVM and Wireless keyboard"
-	depends on HID
 	default !EXPERT
 	help
 	Support for Belkin Flip KVM and Wireless keyboard.
@@ -202,7 +192,6 @@ config HID_BIGBEN_FF
 
 config HID_CHERRY
 	tristate "Cherry Cymotion keyboard"
-	depends on HID
 	default !EXPERT
 	help
 	Support for Cherry Cymotion keyboard.
@@ -227,7 +216,6 @@ config HID_CORSAIR
 
 config HID_COUGAR
 	tristate "Cougar devices"
-	depends on HID
 	help
 	Support for Cougar devices that are not fully compliant with the
 	HID standard.
@@ -237,7 +225,6 @@ config HID_COUGAR
 
 config HID_MACALLY
 	tristate "Macally devices"
-	depends on HID
 	help
 	Support for Macally devices that are not fully compliant with the
 	HID standard.
@@ -262,7 +249,6 @@ config HID_PRODIKEYS
 
 config HID_CMEDIA
 	tristate "CMedia audio chips"
-	depends on HID
 	help
 	Support for CMedia CM6533 HID audio jack controls
         and HS100B mute buttons.
@@ -288,14 +274,12 @@ config HID_CREATIVE_SB0540
 
 config HID_CYPRESS
 	tristate "Cypress mouse and barcode readers"
-	depends on HID
 	default !EXPERT
 	help
 	Support for cypress mouse and barcode readers.
 
 config HID_DRAGONRISE
 	tristate "DragonRise Inc. game controller"
-	depends on HID
 	help
 	Say Y here if you have DragonRise Inc. game controllers.
 	These might be branded as:
@@ -314,7 +298,6 @@ config DRAGONRISE_FF
 
 config HID_EMS_FF
 	tristate "EMS Production Inc. force feedback support"
-	depends on HID
 	select INPUT_FF_MEMLESS
 	help
 	Say Y here if you want to enable force feedback support for devices by
@@ -332,7 +315,6 @@ config HID_ELAN
 
 config HID_ELECOM
 	tristate "ELECOM HID devices"
-	depends on HID
 	help
 	Support for ELECOM devices:
 	  - BM084 Bluetooth Mouse
@@ -349,7 +331,6 @@ config HID_ELO
 
 config HID_EZKEY
 	tristate "Ezkey BTC 8193 keyboard"
-	depends on HID
 	default !EXPERT
 	help
 	Support for Ezkey BTC 8193 keyboard.
@@ -367,19 +348,16 @@ config HID_FT260
 
 config HID_GEMBIRD
 	tristate "Gembird Joypad"
-	depends on HID
 	help
 	Support for Gembird JPD-DualForce 2.
 
 config HID_GFRM
 	tristate "Google Fiber TV Box remote control support"
-	depends on HID
 	help
 	Support for Google Fiber TV Box remote controls
 
 config HID_GLORIOUS
 	tristate "Glorious PC Gaming Race mice"
-	depends on HID
 	help
 	  Support for Glorious PC Gaming Race mice such as
 	  the Glorious Model O, O- and D.
@@ -424,7 +402,6 @@ config HID_VIVALDI
 	tristate "Vivaldi Keyboard"
 	select HID_VIVALDI_COMMON
 	select INPUT_VIVALDIFMAP
-	depends on HID
 	help
 	  Say Y here if you want to enable support for Vivaldi keyboards.
 
@@ -447,7 +424,6 @@ config HID_GT683R
 
 config HID_KEYTOUCH
 	tristate "Keytouch HID devices"
-	depends on HID
 	help
 	Support for Keytouch HID devices not fully compliant with
 	the specification. Currently supported:
@@ -455,7 +431,6 @@ config HID_KEYTOUCH
 
 config HID_KYE
 	tristate "KYE/Genius devices"
-	depends on HID
 	help
 	Support for KYE/Genius devices not fully compliant with HID standard:
 	- Ergo Mouse
@@ -471,32 +446,37 @@ config HID_UCLOGIC
 
 config HID_WALTOP
 	tristate "Waltop"
-	depends on HID
 	help
 	Support for Waltop tablets.
 
 config HID_VIEWSONIC
 	tristate "ViewSonic/Signotec"
-	depends on HID
 	help
 	  Support for ViewSonic/Signotec PD1011 signature pad.
 
+config HID_VRC2
+	tristate "VRC-2 Car Controller"
+	depends on HID
+	help
+        Support for VRC-2 which is a 2-axis controller often used in
+        car simulators.
+
+        To compile this driver as a module, choose M here: the
+        module will be called hid-vrc2.
+
 config HID_XIAOMI
 	tristate "Xiaomi"
-	depends on HID
 	help
 	  Adds support for side buttons of Xiaomi Mi Dual Mode Wireless
 	  Mouse Silent Edition.
 
 config HID_GYRATION
 	tristate "Gyration remote control"
-	depends on HID
 	help
 	Support for Gyration remote control.
 
 config HID_ICADE
 	tristate "ION iCade arcade controller"
-	depends on HID
 	help
 	Support for the ION iCade arcade controller to work as a joystick.
 
@@ -505,14 +485,12 @@ config HID_ICADE
 
 config HID_ITE
 	tristate "ITE devices"
-	depends on HID
 	default !EXPERT
 	help
 	Support for ITE devices not fully compliant with HID standard.
 
 config HID_JABRA
 	tristate "Jabra USB HID Driver"
-	depends on HID
 	help
 	Support for Jabra USB HID devices.
 
@@ -523,26 +501,22 @@ config HID_JABRA
 
 config HID_TWINHAN
 	tristate "Twinhan IR remote control"
-	depends on HID
 	help
 	Support for Twinhan IR remote control.
 
 config HID_KENSINGTON
 	tristate "Kensington Slimblade Trackball"
-	depends on HID
 	default !EXPERT
 	help
 	Support for Kensington Slimblade Trackball.
 
 config HID_LCPOWER
 	tristate "LC-Power"
-	depends on HID
 	help
 	Support for LC-Power RC1000MCE RF remote control.
 
 config HID_LED
 	tristate "Simple RGB LED support"
-	depends on HID
 	depends on LEDS_CLASS
 	help
 	Support for simple RGB LED devices. Currently supported are:
@@ -557,7 +531,6 @@ config HID_LED
 
 config HID_LENOVO
 	tristate "Lenovo / Thinkpad devices"
-	depends on HID
 	select NEW_LEDS
 	select LEDS_CLASS
 	help
@@ -675,7 +648,6 @@ config LOGIWHEELS_FF
 
 config HID_MAGICMOUSE
 	tristate "Apple Magic Mouse/Trackpad multi-touch support"
-	depends on HID
 	help
 	Support for the Apple Magic Mouse/Trackpad multi-touch.
 
@@ -684,14 +656,12 @@ config HID_MAGICMOUSE
 
 config HID_MALTRON
 	tristate "Maltron L90 keyboard"
-	depends on HID
 	help
 	Adds support for the volume up, volume down, mute, and play/pause buttons
 	of the Maltron L90 keyboard.
 
 config HID_MAYFLASH
 	tristate "Mayflash game controller adapter force feedback"
-	depends on HID
 	select INPUT_FF_MEMLESS
 	help
 	Say Y here if you have HJZ Mayflash PS3 game controller adapters
@@ -707,14 +677,12 @@ config HID_MEGAWORLD_FF
 
 config HID_REDRAGON
 	tristate "Redragon keyboards"
-	depends on HID
 	default !EXPERT
 	help
     Support for Redragon keyboards that need fix-ups to work properly.
 
 config HID_MICROSOFT
 	tristate "Microsoft non-fully HID-compliant devices"
-	depends on HID
 	default !EXPERT
 	select INPUT_FF_MEMLESS
 	help
@@ -722,14 +690,12 @@ config HID_MICROSOFT
 
 config HID_MONTEREY
 	tristate "Monterey Genius KB29E keyboard"
-	depends on HID
 	default !EXPERT
 	help
 	Support for Monterey Genius KB29E.
 
 config HID_MULTITOUCH
 	tristate "HID Multitouch panels"
-	depends on HID
 	help
 	  Generic support for HID multitouch panels.
 
@@ -775,7 +741,6 @@ config HID_MULTITOUCH
 
 config HID_NINTENDO
 	tristate "Nintendo Joy-Con and Pro Controller support"
-	depends on HID
 	depends on NEW_LEDS
 	depends on LEDS_CLASS
 	select POWER_SUPPLY
@@ -811,7 +776,6 @@ config HID_NTRIG
 
 config HID_ORTEK
 	tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad"
-	depends on HID
 	help
 	There are certain devices which have LogicalMaximum wrong in the keyboard
 	usage page of their report descriptor. The most prevailing ones so far
@@ -824,7 +788,6 @@ config HID_ORTEK
 
 config HID_PANTHERLORD
 	tristate "Pantherlord/GreenAsia game controller"
-	depends on HID
 	help
 	  Say Y here if you have a PantherLord/GreenAsia based game controller
 	  or adapter.
@@ -850,13 +813,11 @@ config HID_PENMOUNT
 
 config HID_PETALYNX
 	tristate "Petalynx Maxter remote control"
-	depends on HID
 	help
 	Support for Petalynx Maxter remote control.
 
 config HID_PICOLCD
 	tristate "PicoLCD (graphic version)"
-	depends on HID
 	help
 	  This provides support for Minibox PicoLCD devices, currently
 	  only the graphical ones are supported.
@@ -922,7 +883,6 @@ config HID_PICOLCD_CIR
 
 config HID_PLANTRONICS
 	tristate "Plantronics USB HID Driver"
-	depends on HID
 	help
 	  Provides HID support for Plantronics USB audio devices.
 	  Correctly maps vendor unique volume up/down HID usages to
@@ -933,7 +893,6 @@ config HID_PLANTRONICS
 
 config HID_PLAYSTATION
 	tristate "PlayStation HID Driver"
-	depends on HID
 	depends on LEDS_CLASS_MULTICOLOR
 	select CRC32
 	select POWER_SUPPLY
@@ -950,16 +909,23 @@ config PLAYSTATION_FF
 	  Say Y here if you would like to enable force feedback support for
 	  PlayStation game controllers.
 
+config HID_PXRC
+       tristate "PhoenixRC HID Flight Controller"
+       depends on HID
+       help
+       Support for PhoenixRC HID Flight Controller, a 8-axis flight controller.
+
+       To compile this driver as a module, choose M here: the
+       module will be called hid-pxrc.
+
 config HID_RAZER
 	tristate "Razer non-fully HID-compliant devices"
-	depends on HID
 	help
 	Support for Razer devices that are not fully compliant with the
 	HID standard.
 
 config HID_PRIMAX
 	tristate "Primax non-fully HID-compliant devices"
-	depends on HID
 	help
 	Support for Primax devices that are not fully compliant with the
 	HID standard.
@@ -981,7 +947,6 @@ config HID_ROCCAT
 
 config HID_SAITEK
 	tristate "Saitek (Mad Catz) non-fully HID-compliant devices"
-	depends on HID
 	help
 	Support for Saitek devices that are not fully compliant with the
 	HID standard.
@@ -999,7 +964,6 @@ config HID_SAMSUNG
 
 config HID_SEMITEK
 	tristate "Semitek USB keyboards"
-	depends on HID
 	help
 	Support for Semitek USB keyboards that are not fully compliant
 	with the HID standard.
@@ -1050,13 +1014,11 @@ config SONY_FF
 
 config HID_SPEEDLINK
 	tristate "Speedlink VAD Cezanne mouse support"
-	depends on HID
 	help
 	Support for Speedlink Vicious and Divine Cezanne mouse.
 
 config HID_STEAM
 	tristate "Steam Controller support"
-	depends on HID
 	select POWER_SUPPLY
 	help
 	Say Y here if you have a Steam Controller if you want to use it
@@ -1065,19 +1027,16 @@ config HID_STEAM
 
 config HID_STEELSERIES
 	tristate "Steelseries SRW-S1 steering wheel support"
-	depends on HID
 	help
 	Support for Steelseries SRW-S1 steering wheel
 
 config HID_SUNPLUS
 	tristate "Sunplus wireless desktop"
-	depends on HID
 	help
 	Support for Sunplus wireless desktop.
 
 config HID_RMI
 	tristate "Synaptics RMI4 device support"
-	depends on HID
 	select RMI4_CORE
 	select RMI4_F03
 	select RMI4_F11
@@ -1090,7 +1049,6 @@ config HID_RMI
 
 config HID_GREENASIA
 	tristate "GreenAsia (Product ID 0x12) game controller support"
-	depends on HID
 	help
 	  Say Y here if you have a GreenAsia (Product ID 0x12) based game
 	  controller or adapter.
@@ -1112,7 +1070,6 @@ config HID_HYPERV_MOUSE
 
 config HID_SMARTJOYPLUS
 	tristate "SmartJoy PLUS PS2/USB adapter support"
-	depends on HID
 	help
 	Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
 	Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
@@ -1130,20 +1087,23 @@ config SMARTJOYPLUS_FF
 
 config HID_TIVO
 	tristate "TiVo Slide Bluetooth remote control support"
-	depends on HID
 	help
 	Say Y if you have a TiVo Slide Bluetooth remote control.
 
 config HID_TOPSEED
 	tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
-	depends on HID
 	help
 	Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
 	CLLRCMCE remote control.
 
+config HID_TOPRE
+	tristate "Topre REALFORCE keyboards"
+	depends on HID
+	help
+	  Say Y for N-key rollover support on Topre REALFORCE R2 108 key keyboards.
+
 config HID_THINGM
 	tristate "ThingM blink(1) USB RGB LED"
-	depends on HID
 	depends on LEDS_CLASS
 	select HID_LED
 	help
@@ -1170,7 +1130,6 @@ config THRUSTMASTER_FF
 
 config HID_UDRAW_PS3
 	tristate "THQ PS3 uDraw tablet"
-	depends on HID
 	help
 	  Say Y here if you want to use the THQ uDraw gaming tablet for
 	  the PS3.
@@ -1207,7 +1166,6 @@ config HID_WACOM
 
 config HID_WIIMOTE
 	tristate "Nintendo Wii / Wii U peripherals"
-	depends on HID
 	depends on LEDS_CLASS
 	select POWER_SUPPLY
 	select INPUT_FF_MEMLESS
@@ -1232,7 +1190,6 @@ config HID_WIIMOTE
 
 config HID_XINMO
 	tristate "Xin-Mo non-fully compliant devices"
-	depends on HID
 	help
 	Support for Xin-Mo devices that are not fully compliant with the HID
 	standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
@@ -1240,7 +1197,6 @@ config HID_XINMO
 
 config HID_ZEROPLUS
 	tristate "Zeroplus based game controller support"
-	depends on HID
 	help
 	  Say Y here if you have a Zeroplus based game controller.
 
@@ -1254,13 +1210,12 @@ config ZEROPLUS_FF
 
 config HID_ZYDACRON
 	tristate "Zydacron remote control support"
-	depends on HID
 	help
 	Support for Zydacron remote control.
 
 config HID_SENSOR_HUB
 	tristate "HID Sensors framework support"
-	depends on HID && HAS_IOMEM
+	depends on HAS_IOMEM
 	select MFD_CORE
 	default n
 	help
@@ -1289,7 +1244,6 @@ config HID_SENSOR_CUSTOM_SENSOR
 
 config HID_ALPS
 	tristate "Alps HID device support"
-	depends on HID
 	help
 	Support for Alps I2C HID touchpads and StickPointer.
 	Say Y here if you have a Alps touchpads over i2c-hid or usbhid
@@ -1307,7 +1261,7 @@ config HID_MCP2221
 	will be called hid-mcp2221.ko.
 
 config HID_KUNIT_TEST
-	bool "KUnit tests for HID" if !KUNIT_ALL_TESTS
+	tristate "KUnit tests for HID" if !KUNIT_ALL_TESTS
 	depends on KUNIT=y
 	depends on HID_UCLOGIC
 	default KUNIT_ALL_TESTS
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index b0bef80..e8014c1 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -101,6 +101,7 @@ hid-picolcd-$(CONFIG_DEBUG_FS)		+= hid-picolcd_debugfs.o
 obj-$(CONFIG_HID_PLANTRONICS)	+= hid-plantronics.o
 obj-$(CONFIG_HID_PLAYSTATION)	+= hid-playstation.o
 obj-$(CONFIG_HID_PRIMAX)	+= hid-primax.o
+obj-$(CONFIG_HID_PXRC)		+= hid-pxrc.o
 obj-$(CONFIG_HID_RAZER)	+= hid-razer.o
 obj-$(CONFIG_HID_REDRAGON)	+= hid-redragon.o
 obj-$(CONFIG_HID_RETRODE)	+= hid-retrode.o
@@ -123,6 +124,7 @@ obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o
 obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o hid-thrustmaster.o
 obj-$(CONFIG_HID_TIVO)		+= hid-tivo.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
+obj-$(CONFIG_HID_TOPRE)	+= hid-topre.o
 obj-$(CONFIG_HID_TWINHAN)	+= hid-twinhan.o
 obj-$(CONFIG_HID_U2FZERO)	+= hid-u2fzero.o
 hid-uclogic-objs		:= hid-uclogic-core.o \
@@ -136,6 +138,7 @@ obj-$(CONFIG_HID_XINMO)		+= hid-xinmo.o
 obj-$(CONFIG_HID_ZEROPLUS)	+= hid-zpff.o
 obj-$(CONFIG_HID_ZYDACRON)	+= hid-zydacron.o
 obj-$(CONFIG_HID_VIEWSONIC)	+= hid-viewsonic.o
+obj-$(CONFIG_HID_VRC2)		+= hid-vrc2.o
 
 wacom-objs			:= wacom_wac.o wacom_sys.o
 obj-$(CONFIG_HID_WACOM)		+= wacom.o
@@ -144,8 +147,10 @@ obj-$(CONFIG_HID_WIIMOTE)	+= hid-wiimote.o
 obj-$(CONFIG_HID_SENSOR_HUB)	+= hid-sensor-hub.o
 obj-$(CONFIG_HID_SENSOR_CUSTOM_SENSOR)	+= hid-sensor-custom.o
 
-obj-$(CONFIG_HID_KUNIT_TEST)	+= hid-uclogic-rdesc.o \
+hid-uclogic-test-objs		:= hid-uclogic-rdesc.o \
+				   hid-uclogic-params.o \
 				   hid-uclogic-rdesc-test.o
+obj-$(CONFIG_HID_KUNIT_TEST)	+= hid-uclogic-test.o
 
 obj-$(CONFIG_USB_HID)		+= usbhid/
 obj-$(CONFIG_USB_MOUSE)		+= usbhid/
diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
index 70436f9..4da2f9f 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
@@ -110,6 +110,8 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata)
 	amd_sfh1_1_set_desc_ops(mp2_ops);
 
 	cl_data->num_hid_devices = amd_sfh_get_sensor_num(privdata, &cl_data->sensor_idx[0]);
+	if (cl_data->num_hid_devices == 0)
+		return -ENODEV;
 
 	INIT_DELAYED_WORK(&cl_data->work, amd_sfh_work);
 	INIT_DELAYED_WORK(&cl_data->work_buffer, amd_sfh_work_buffer);
@@ -286,13 +288,13 @@ int amd_sfh1_1_init(struct amd_mp2_dev *mp2)
 
 	phy_base <<= 21;
 	if (!devm_request_mem_region(dev, phy_base, 128 * 1024, "amd_sfh")) {
-		dev_err(dev, "can't reserve mmio registers\n");
+		dev_dbg(dev, "can't reserve mmio registers\n");
 		return -ENOMEM;
 	}
 
 	mp2->vsbase = devm_ioremap(dev, phy_base, 128 * 1024);
 	if (!mp2->vsbase) {
-		dev_err(dev, "failed to remap vsbase\n");
+		dev_dbg(dev, "failed to remap vsbase\n");
 		return -ENOMEM;
 	}
 
@@ -301,7 +303,7 @@ int amd_sfh1_1_init(struct amd_mp2_dev *mp2)
 
 	memcpy_fromio(&binfo, mp2->vsbase, sizeof(struct sfh_base_info));
 	if (binfo.sbase.fw_info.fw_ver == 0 || binfo.sbase.s_list.sl.sensors == 0) {
-		dev_err(dev, "failed to get sensors\n");
+		dev_dbg(dev, "failed to get sensors\n");
 		return -EOPNOTSUPP;
 	}
 	dev_dbg(dev, "firmware version 0x%x\n", binfo.sbase.fw_info.fw_ver);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index b7f5566..9c1d31f 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -55,7 +55,7 @@ MODULE_PARM_DESC(ignore_special_drivers, "Ignore any special drivers and handle 
  */
 
 struct hid_report *hid_register_report(struct hid_device *device,
-				       unsigned int type, unsigned int id,
+				       enum hid_report_type type, unsigned int id,
 				       unsigned int application)
 {
 	struct hid_report_enum *report_enum = device->report_enum + type;
@@ -967,7 +967,7 @@ static const char * const hid_report_names[] = {
  * parsing.
  */
 struct hid_report *hid_validate_values(struct hid_device *hid,
-				       unsigned int type, unsigned int id,
+				       enum hid_report_type type, unsigned int id,
 				       unsigned int field_index,
 				       unsigned int report_counts)
 {
@@ -1921,7 +1921,7 @@ static struct hid_report *hid_get_report(struct hid_report_enum *report_enum,
  * DO NOT USE in hid drivers directly, but through hid_hw_request instead.
  */
 int __hid_request(struct hid_device *hid, struct hid_report *report,
-		int reqtype)
+		enum hid_class_request reqtype)
 {
 	char *buf;
 	int ret;
@@ -1954,8 +1954,8 @@ out:
 }
 EXPORT_SYMBOL_GPL(__hid_request);
 
-int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
-		int interrupt)
+int hid_report_raw_event(struct hid_device *hid, enum hid_report_type type, u8 *data, u32 size,
+			 int interrupt)
 {
 	struct hid_report_enum *report_enum = hid->report_enum + type;
 	struct hid_report *report;
@@ -2019,7 +2019,8 @@ EXPORT_SYMBOL_GPL(hid_report_raw_event);
  *
  * This is data entry for lower layers.
  */
-int hid_input_report(struct hid_device *hid, int type, u8 *data, u32 size, int interrupt)
+int hid_input_report(struct hid_device *hid, enum hid_report_type type, u8 *data, u32 size,
+		     int interrupt)
 {
 	struct hid_report_enum *report_enum;
 	struct hid_driver *hdrv;
@@ -2088,6 +2089,7 @@ const struct hid_device_id *hid_match_id(const struct hid_device *hdev,
 
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(hid_match_id);
 
 static const struct hid_device_id hid_hiddev_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS) },
@@ -2352,7 +2354,7 @@ EXPORT_SYMBOL_GPL(hid_hw_close);
  * @reqtype: hid request type
  */
 void hid_hw_request(struct hid_device *hdev,
-		    struct hid_report *report, int reqtype)
+		    struct hid_report *report, enum hid_class_request reqtype)
 {
 	if (hdev->ll_driver->request)
 		return hdev->ll_driver->request(hdev, report, reqtype);
@@ -2377,7 +2379,7 @@ EXPORT_SYMBOL_GPL(hid_hw_request);
  */
 int hid_hw_raw_request(struct hid_device *hdev,
 		       unsigned char reportnum, __u8 *buf,
-		       size_t len, unsigned char rtype, int reqtype)
+		       size_t len, enum hid_report_type rtype, enum hid_class_request reqtype)
 {
 	if (len < 1 || len > HID_MAX_BUFFER_SIZE || !buf)
 		return -EINVAL;
@@ -2739,10 +2741,12 @@ int hid_add_device(struct hid_device *hdev)
 			hid_warn(hdev, "bad device descriptor (%d)\n", ret);
 	}
 
+	hdev->id = atomic_inc_return(&id);
+
 	/* XXX hack, any other cleaner solution after the driver core
 	 * is converted to allow more than 20 bytes as the device name? */
 	dev_set_name(&hdev->dev, "%04X:%04X:%04X.%04X", hdev->bus,
-		     hdev->vendor, hdev->product, atomic_inc_return(&id));
+		     hdev->vendor, hdev->product, hdev->id);
 
 	hid_debug_register(hdev, dev_name(&hdev->dev));
 	ret = device_add(&hdev->dev);
diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
index ff40f1e..7ae5f27 100644
--- a/drivers/hid/hid-google-hammer.c
+++ b/drivers/hid/hid-google-hammer.c
@@ -608,9 +608,11 @@ static struct hid_driver hammer_driver = {
 	.probe = hammer_probe,
 	.remove = hammer_remove,
 	.feature_mapping = vivaldi_feature_mapping,
-	.input_configured = vivaldi_input_configured,
 	.input_mapping = hammer_input_mapping,
 	.event = hammer_event,
+	.driver = {
+		.dev_groups = vivaldi_attribute_groups,
+	},
 };
 
 static int __init hammer_init(void)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index f80d619..da86565 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1231,6 +1231,9 @@
 #define USB_DEVICE_ID_TIVO_SLIDE	0x1201
 #define USB_DEVICE_ID_TIVO_SLIDE_PRO	0x1203
 
+#define USB_VENDOR_ID_TOPRE			0x0853
+#define USB_DEVICE_ID_TOPRE_REALFORCE_R2_108			0x0148
+
 #define USB_VENDOR_ID_TOPSEED		0x0766
 #define USB_DEVICE_ID_TOPSEED_CYBERLINK	0x0204
 
@@ -1279,10 +1282,12 @@
 #define USB_DEVICE_ID_YIYNOVA_TABLET		0x004d
 
 #define USB_VENDOR_ID_UGEE		0x28bd
+#define USB_DEVICE_ID_UGEE_PARBLO_A610_PRO	0x1903
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_G540	0x0075
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_G640	0x0094
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01	0x0042
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L	0x0935
+#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S	0x0909
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06	0x0078
 #define USB_DEVICE_ID_UGEE_TABLET_G5		0x0074
 #define USB_DEVICE_ID_UGEE_TABLET_EX07S		0x0071
@@ -1386,6 +1391,7 @@
 
 #define USB_VENDOR_ID_MULTIPLE_1781	0x1781
 #define USB_DEVICE_ID_RAPHNET_4NES4SNES_OLD	0x0a9d
+#define USB_DEVICE_ID_PHOENIXRC        0x0898
 
 #define USB_VENDOR_ID_DRACAL_RAPHNET	0x289b
 #define USB_DEVICE_ID_RAPHNET_2NES2SNES	0x0002
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 68f9e9d..71a9c25 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -41,6 +41,9 @@ module_param(disable_tap_to_click, bool, 0644);
 MODULE_PARM_DESC(disable_tap_to_click,
 	"Disable Tap-To-Click mode reporting for touchpads (only on the K400 currently).");
 
+/* Define a non-zero software ID to identify our own requests */
+#define LINUX_KERNEL_SW_ID			0x01
+
 #define REPORT_ID_HIDPP_SHORT			0x10
 #define REPORT_ID_HIDPP_LONG			0x11
 #define REPORT_ID_HIDPP_VERY_LONG		0x12
@@ -71,21 +74,18 @@ MODULE_PARM_DESC(disable_tap_to_click,
 #define HIDPP_QUIRK_NO_HIDINPUT			BIT(23)
 #define HIDPP_QUIRK_FORCE_OUTPUT_REPORTS	BIT(24)
 #define HIDPP_QUIRK_UNIFYING			BIT(25)
-#define HIDPP_QUIRK_HI_RES_SCROLL_1P0		BIT(26)
-#define HIDPP_QUIRK_HI_RES_SCROLL_X2120		BIT(27)
-#define HIDPP_QUIRK_HI_RES_SCROLL_X2121		BIT(28)
-#define HIDPP_QUIRK_HIDPP_WHEELS		BIT(29)
-#define HIDPP_QUIRK_HIDPP_EXTRA_MOUSE_BTNS	BIT(30)
-#define HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS	BIT(31)
+#define HIDPP_QUIRK_HIDPP_WHEELS		BIT(26)
+#define HIDPP_QUIRK_HIDPP_EXTRA_MOUSE_BTNS	BIT(27)
+#define HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS	BIT(28)
 
 /* These are just aliases for now */
 #define HIDPP_QUIRK_KBD_SCROLL_WHEEL HIDPP_QUIRK_HIDPP_WHEELS
 #define HIDPP_QUIRK_KBD_ZOOM_WHEEL   HIDPP_QUIRK_HIDPP_WHEELS
 
 /* Convenience constant to check for any high-res support. */
-#define HIDPP_QUIRK_HI_RES_SCROLL	(HIDPP_QUIRK_HI_RES_SCROLL_1P0 | \
-					 HIDPP_QUIRK_HI_RES_SCROLL_X2120 | \
-					 HIDPP_QUIRK_HI_RES_SCROLL_X2121)
+#define HIDPP_CAPABILITY_HI_RES_SCROLL	(HIDPP_CAPABILITY_HIDPP10_FAST_SCROLL | \
+					 HIDPP_CAPABILITY_HIDPP20_HI_RES_SCROLL | \
+					 HIDPP_CAPABILITY_HIDPP20_HI_RES_WHEEL)
 
 #define HIDPP_QUIRK_DELAYED_INIT		HIDPP_QUIRK_NO_HIDINPUT
 
@@ -96,6 +96,9 @@ MODULE_PARM_DESC(disable_tap_to_click,
 #define HIDPP_CAPABILITY_BATTERY_VOLTAGE	BIT(4)
 #define HIDPP_CAPABILITY_BATTERY_PERCENTAGE	BIT(5)
 #define HIDPP_CAPABILITY_UNIFIED_BATTERY	BIT(6)
+#define HIDPP_CAPABILITY_HIDPP20_HI_RES_WHEEL	BIT(7)
+#define HIDPP_CAPABILITY_HIDPP20_HI_RES_SCROLL	BIT(8)
+#define HIDPP_CAPABILITY_HIDPP10_FAST_SCROLL	BIT(9)
 
 #define lg_map_key_clear(c)  hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c))
 
@@ -343,7 +346,7 @@ static int hidpp_send_fap_command_sync(struct hidpp_device *hidpp,
 	else
 		message->report_id = REPORT_ID_HIDPP_LONG;
 	message->fap.feature_index = feat_index;
-	message->fap.funcindex_clientid = funcindex_clientid;
+	message->fap.funcindex_clientid = funcindex_clientid | LINUX_KERNEL_SW_ID;
 	memcpy(&message->fap.params, params, param_count);
 
 	ret = hidpp_send_message_sync(hidpp, message, response);
@@ -856,8 +859,8 @@ static int hidpp_unifying_init(struct hidpp_device *hidpp)
 #define HIDPP_PAGE_ROOT					0x0000
 #define HIDPP_PAGE_ROOT_IDX				0x00
 
-#define CMD_ROOT_GET_FEATURE				0x01
-#define CMD_ROOT_GET_PROTOCOL_VERSION			0x11
+#define CMD_ROOT_GET_FEATURE				0x00
+#define CMD_ROOT_GET_PROTOCOL_VERSION			0x10
 
 static int hidpp_root_get_feature(struct hidpp_device *hidpp, u16 feature,
 	u8 *feature_index, u8 *feature_type)
@@ -934,9 +937,9 @@ print_version:
 
 #define HIDPP_PAGE_GET_DEVICE_NAME_TYPE			0x0005
 
-#define CMD_GET_DEVICE_NAME_TYPE_GET_COUNT		0x01
-#define CMD_GET_DEVICE_NAME_TYPE_GET_DEVICE_NAME	0x11
-#define CMD_GET_DEVICE_NAME_TYPE_GET_TYPE		0x21
+#define CMD_GET_DEVICE_NAME_TYPE_GET_COUNT		0x00
+#define CMD_GET_DEVICE_NAME_TYPE_GET_DEVICE_NAME	0x10
+#define CMD_GET_DEVICE_NAME_TYPE_GET_TYPE		0x20
 
 static int hidpp_devicenametype_get_count(struct hidpp_device *hidpp,
 	u8 feature_index, u8 *nameLength)
@@ -1966,8 +1969,8 @@ static int hidpp_touchpad_fw_items_set(struct hidpp_device *hidpp,
 
 #define HIDPP_PAGE_TOUCHPAD_RAW_XY			0x6100
 
-#define CMD_TOUCHPAD_GET_RAW_INFO			0x01
-#define CMD_TOUCHPAD_SET_RAW_REPORT_STATE		0x21
+#define CMD_TOUCHPAD_GET_RAW_INFO			0x00
+#define CMD_TOUCHPAD_SET_RAW_REPORT_STATE		0x20
 
 #define EVENT_TOUCHPAD_RAW_XY				0x00
 
@@ -3415,14 +3418,14 @@ static int hi_res_scroll_enable(struct hidpp_device *hidpp)
 	int ret;
 	u8 multiplier = 1;
 
-	if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2121) {
+	if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP20_HI_RES_WHEEL) {
 		ret = hidpp_hrw_set_wheel_mode(hidpp, false, true, false);
 		if (ret == 0)
 			ret = hidpp_hrw_get_wheel_capability(hidpp, &multiplier);
-	} else if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2120) {
+	} else if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP20_HI_RES_SCROLL) {
 		ret = hidpp_hrs_set_highres_scrolling_mode(hidpp, true,
 							   &multiplier);
-	} else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */ {
+	} else /* if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP10_FAST_SCROLL) */ {
 		ret = hidpp10_enable_scrolling_acceleration(hidpp);
 		multiplier = 8;
 	}
@@ -3437,6 +3440,49 @@ static int hi_res_scroll_enable(struct hidpp_device *hidpp)
 	return 0;
 }
 
+static int hidpp_initialize_hires_scroll(struct hidpp_device *hidpp)
+{
+	int ret;
+	unsigned long capabilities;
+
+	capabilities = hidpp->capabilities;
+
+	if (hidpp->protocol_major >= 2) {
+		u8 feature_index;
+		u8 feature_type;
+
+		ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_HIRES_WHEEL,
+					     &feature_index, &feature_type);
+		if (!ret) {
+			hidpp->capabilities |= HIDPP_CAPABILITY_HIDPP20_HI_RES_WHEEL;
+			hid_dbg(hidpp->hid_dev, "Detected HID++ 2.0 hi-res scroll wheel\n");
+			return 0;
+		}
+		ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_HI_RESOLUTION_SCROLLING,
+					     &feature_index, &feature_type);
+		if (!ret) {
+			hidpp->capabilities |= HIDPP_CAPABILITY_HIDPP20_HI_RES_SCROLL;
+			hid_dbg(hidpp->hid_dev, "Detected HID++ 2.0 hi-res scrolling\n");
+		}
+	} else {
+		struct hidpp_report response;
+
+		ret = hidpp_send_rap_command_sync(hidpp,
+						  REPORT_ID_HIDPP_SHORT,
+						  HIDPP_GET_REGISTER,
+						  HIDPP_ENABLE_FAST_SCROLL,
+						  NULL, 0, &response);
+		if (!ret) {
+			hidpp->capabilities |= HIDPP_CAPABILITY_HIDPP10_FAST_SCROLL;
+			hid_dbg(hidpp->hid_dev, "Detected HID++ 1.0 fast scroll\n");
+		}
+	}
+
+	if (hidpp->capabilities == capabilities)
+		hid_dbg(hidpp->hid_dev, "Did not detect HID++ hi-res scrolling hardware support\n");
+	return 0;
+}
+
 /* -------------------------------------------------------------------------- */
 /* Generic HID++ devices                                                      */
 /* -------------------------------------------------------------------------- */
@@ -3691,8 +3737,9 @@ static int hidpp_event(struct hid_device *hdev, struct hid_field *field,
 	 * cases we must return early (falling back to default behaviour) to
 	 * avoid a crash in hidpp_scroll_counter_handle_scroll.
 	 */
-	if (!(hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL) || value == 0
-	    || hidpp->input == NULL || counter->wheel_multiplier == 0)
+	if (!(hidpp->capabilities & HIDPP_CAPABILITY_HI_RES_SCROLL)
+	    || value == 0 || hidpp->input == NULL
+	    || counter->wheel_multiplier == 0)
 		return 0;
 
 	hidpp_scroll_counter_handle_scroll(hidpp->input, counter, value);
@@ -3924,6 +3971,7 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 	}
 
 	hidpp_initialize_battery(hidpp);
+	hidpp_initialize_hires_scroll(hidpp);
 
 	/* forward current battery state */
 	if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP10_BATTERY) {
@@ -3943,7 +3991,7 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 	if (hidpp->battery.ps)
 		power_supply_changed(hidpp->battery.ps);
 
-	if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL)
+	if (hidpp->capabilities & HIDPP_CAPABILITY_HI_RES_SCROLL)
 		hi_res_scroll_enable(hidpp);
 
 	if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT) || hidpp->delayed_input)
@@ -3959,8 +4007,10 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 	hidpp_populate_input(hidpp, input);
 
 	ret = input_register_device(input);
-	if (ret)
+	if (ret) {
 		input_free_device(input);
+		return;
+	}
 
 	hidpp->delayed_input = input;
 }
@@ -4219,6 +4269,21 @@ static void hidpp_remove(struct hid_device *hdev)
 	mutex_destroy(&hidpp->send_mutex);
 }
 
+static const struct hid_device_id unhandled_hidpp_devices[] = {
+	/* Logitech Harmony Adapter for PS3, handled in hid-sony */
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) },
+	/* Handled in hid-generic */
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DINOVO_EDGE_KBD) },
+	{}
+};
+
+static bool hidpp_match(struct hid_device *hdev,
+			bool ignore_special_driver)
+{
+	/* Refuse to handle devices handled by other HID drivers */
+	return !hid_match_id(hdev, unhandled_hidpp_devices);
+}
+
 #define LDJ_DEVICE(product) \
 	HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, \
 		   USB_VENDOR_ID_LOGITECH, (product))
@@ -4239,42 +4304,9 @@ static const struct hid_device_id hidpp_devices[] = {
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH,
 		USB_DEVICE_ID_LOGITECH_T651),
 	  .driver_data = HIDPP_QUIRK_CLASS_WTP },
-	{ /* Mouse Logitech Anywhere MX */
-	  LDJ_DEVICE(0x1017), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 },
-	{ /* Mouse Logitech Cube */
-	  LDJ_DEVICE(0x4010), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2120 },
-	{ /* Mouse Logitech M335 */
-	  LDJ_DEVICE(0x4050), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ /* Mouse Logitech M515 */
-	  LDJ_DEVICE(0x4007), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2120 },
 	{ /* Mouse logitech M560 */
 	  LDJ_DEVICE(0x402d),
-	  .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560
-		| HIDPP_QUIRK_HI_RES_SCROLL_X2120 },
-	{ /* Mouse Logitech M705 (firmware RQM17) */
-	  LDJ_DEVICE(0x101b), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 },
-	{ /* Mouse Logitech M705 (firmware RQM67) */
-	  LDJ_DEVICE(0x406d), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ /* Mouse Logitech M720 */
-	  LDJ_DEVICE(0x405e), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ /* Mouse Logitech MX Anywhere 2 */
-	  LDJ_DEVICE(0x404a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ LDJ_DEVICE(0x4072), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ LDJ_DEVICE(0xb013), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ LDJ_DEVICE(0xb018), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ LDJ_DEVICE(0xb01f), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ /* Mouse Logitech MX Anywhere 2S */
-	  LDJ_DEVICE(0x406a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ /* Mouse Logitech MX Master */
-	  LDJ_DEVICE(0x4041), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ LDJ_DEVICE(0x4060), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ LDJ_DEVICE(0x4071), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ /* Mouse Logitech MX Master 2S */
-	  LDJ_DEVICE(0x4069), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ /* Mouse Logitech MX Master 3 */
-	  LDJ_DEVICE(0x4082), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ /* Mouse Logitech Performance MX */
-	  LDJ_DEVICE(0x101a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 },
+	  .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560 },
 	{ /* Keyboard logitech K400 */
 	  LDJ_DEVICE(0x4024),
 	  .driver_data = HIDPP_QUIRK_CLASS_K400 },
@@ -4335,18 +4367,9 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ /* MX5500 keyboard over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb30b),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
-	{ /* M-RCQ142 V470 Cordless Laser Mouse over Bluetooth */
-	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb008) },
-	{ /* MX Master mouse over Bluetooth */
-	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb012),
-	  .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ /* MX Ergo trackball over Bluetooth */
-	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb01d) },
-	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb01e),
-	  .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
-	{ /* MX Master 3 mouse over Bluetooth */
-	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb023),
-	  .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
+
+	{ /* And try to enable HID++ for all the Logitech Bluetooth devices */
+	  HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_ANY, USB_VENDOR_ID_LOGITECH, HID_ANY_ID) },
 	{}
 };
 
@@ -4360,6 +4383,7 @@ static const struct hid_usage_id hidpp_usages[] = {
 static struct hid_driver hidpp_driver = {
 	.name = "logitech-hidpp-device",
 	.id_table = hidpp_devices,
+	.match = hidpp_match,
 	.report_fixup = hidpp_report_fixup,
 	.probe = hidpp_probe,
 	.remove = hidpp_remove,
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 2e72922..91a4d3f 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1186,7 +1186,7 @@ static void mt_touch_report(struct hid_device *hid,
 	int contact_count = -1;
 
 	/* sticky fingers release in progress, abort */
-	if (test_and_set_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
+	if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
 		return;
 
 	scantime = *app->scantime;
@@ -1267,7 +1267,7 @@ static void mt_touch_report(struct hid_device *hid,
 			del_timer(&td->release_timer);
 	}
 
-	clear_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags);
+	clear_bit_unlock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags);
 }
 
 static int mt_touch_input_configured(struct hid_device *hdev,
@@ -1699,11 +1699,11 @@ static void mt_expired_timeout(struct timer_list *t)
 	 * An input report came in just before we release the sticky fingers,
 	 * it will take care of the sticky fingers.
 	 */
-	if (test_and_set_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
+	if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
 		return;
 	if (test_bit(MT_IO_FLAGS_PENDING_SLOTS, &td->mt_io_flags))
 		mt_release_contacts(hdev);
-	clear_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags);
+	clear_bit_unlock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags);
 }
 
 static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 6028af3..5bfc0c4 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -760,12 +760,31 @@ static int joycon_read_stick_calibration(struct joycon_ctlr *ctlr, u16 cal_addr,
 	cal_y->max = cal_y->center + y_max_above;
 	cal_y->min = cal_y->center - y_min_below;
 
-	return 0;
+	/* check if calibration values are plausible */
+	if (cal_x->min >= cal_x->center || cal_x->center >= cal_x->max ||
+	    cal_y->min >= cal_y->center || cal_y->center >= cal_y->max)
+		ret = -EINVAL;
+
+	return ret;
 }
 
 static const u16 DFLT_STICK_CAL_CEN = 2000;
 static const u16 DFLT_STICK_CAL_MAX = 3500;
 static const u16 DFLT_STICK_CAL_MIN = 500;
+static void joycon_use_default_calibration(struct hid_device *hdev,
+					   struct joycon_stick_cal *cal_x,
+					   struct joycon_stick_cal *cal_y,
+					   const char *stick, int ret)
+{
+	hid_warn(hdev,
+		 "Failed to read %s stick cal, using defaults; e=%d\n",
+		 stick, ret);
+
+	cal_x->center = cal_y->center = DFLT_STICK_CAL_CEN;
+	cal_x->max = cal_y->max = DFLT_STICK_CAL_MAX;
+	cal_x->min = cal_y->min = DFLT_STICK_CAL_MIN;
+}
+
 static int joycon_request_calibration(struct joycon_ctlr *ctlr)
 {
 	u16 left_stick_addr = JC_CAL_FCT_DATA_LEFT_ADDR;
@@ -793,38 +812,24 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr)
 					    &ctlr->left_stick_cal_x,
 					    &ctlr->left_stick_cal_y,
 					    true);
-	if (ret) {
-		hid_warn(ctlr->hdev,
-			 "Failed to read left stick cal, using dflts; e=%d\n",
-			 ret);
 
-		ctlr->left_stick_cal_x.center = DFLT_STICK_CAL_CEN;
-		ctlr->left_stick_cal_x.max = DFLT_STICK_CAL_MAX;
-		ctlr->left_stick_cal_x.min = DFLT_STICK_CAL_MIN;
-
-		ctlr->left_stick_cal_y.center = DFLT_STICK_CAL_CEN;
-		ctlr->left_stick_cal_y.max = DFLT_STICK_CAL_MAX;
-		ctlr->left_stick_cal_y.min = DFLT_STICK_CAL_MIN;
-	}
+	if (ret)
+		joycon_use_default_calibration(ctlr->hdev,
+					       &ctlr->left_stick_cal_x,
+					       &ctlr->left_stick_cal_y,
+					       "left", ret);
 
 	/* read the right stick calibration data */
 	ret = joycon_read_stick_calibration(ctlr, right_stick_addr,
 					    &ctlr->right_stick_cal_x,
 					    &ctlr->right_stick_cal_y,
 					    false);
-	if (ret) {
-		hid_warn(ctlr->hdev,
-			 "Failed to read right stick cal, using dflts; e=%d\n",
-			 ret);
-
-		ctlr->right_stick_cal_x.center = DFLT_STICK_CAL_CEN;
-		ctlr->right_stick_cal_x.max = DFLT_STICK_CAL_MAX;
-		ctlr->right_stick_cal_x.min = DFLT_STICK_CAL_MIN;
 
-		ctlr->right_stick_cal_y.center = DFLT_STICK_CAL_CEN;
-		ctlr->right_stick_cal_y.max = DFLT_STICK_CAL_MAX;
-		ctlr->right_stick_cal_y.min = DFLT_STICK_CAL_MIN;
-	}
+	if (ret)
+		joycon_use_default_calibration(ctlr->hdev,
+					       &ctlr->right_stick_cal_x,
+					       &ctlr->right_stick_cal_y,
+					       "right", ret);
 
 	hid_dbg(ctlr->hdev, "calibration:\n"
 			    "l_x_c=%d l_x_max=%d l_x_min=%d\n"
@@ -1904,9 +1909,8 @@ static int joycon_leds_create(struct joycon_ctlr *ctlr)
 		/* Set the home LED to 0 as default state */
 		ret = joycon_home_led_brightness_set(led, 0);
 		if (ret) {
-			hid_err(hdev, "Failed to set home LED dflt; ret=%d\n",
-									ret);
-			return ret;
+			hid_warn(hdev, "Failed to set home LED default, unregistering home LED");
+			devm_led_classdev_unregister(&hdev->dev, led);
 		}
 	}
 
diff --git a/drivers/hid/hid-playstation.c b/drivers/hid/hid-playstation.c
index b1b5721..40050eb 100644
--- a/drivers/hid/hid-playstation.c
+++ b/drivers/hid/hid-playstation.c
@@ -692,15 +692,12 @@ static ssize_t hardware_version_show(struct device *dev,
 
 static DEVICE_ATTR_RO(hardware_version);
 
-static struct attribute *ps_device_attributes[] = {
+static struct attribute *ps_device_attrs[] = {
 	&dev_attr_firmware_version.attr,
 	&dev_attr_hardware_version.attr,
 	NULL
 };
-
-static const struct attribute_group ps_device_attribute_group = {
-	.attrs = ps_device_attributes,
-};
+ATTRIBUTE_GROUPS(ps_device);
 
 static int dualsense_get_calibration_data(struct dualsense *ds)
 {
@@ -1448,12 +1445,6 @@ static int ps_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		}
 	}
 
-	ret = devm_device_add_group(&hdev->dev, &ps_device_attribute_group);
-	if (ret) {
-		hid_err(hdev, "Failed to register sysfs nodes.\n");
-		goto err_close;
-	}
-
 	return ret;
 
 err_close:
@@ -1487,6 +1478,9 @@ static struct hid_driver ps_driver = {
 	.probe		= ps_probe,
 	.remove		= ps_remove,
 	.raw_event	= ps_raw_event,
+	.driver = {
+		.dev_groups = ps_device_groups,
+	},
 };
 
 static int __init ps_init(void)
diff --git a/drivers/hid/hid-pxrc.c b/drivers/hid/hid-pxrc.c
new file mode 100644
index 0000000..b0e517f
--- /dev/null
+++ b/drivers/hid/hid-pxrc.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HID driver for PhoenixRC 8-axis flight controller
+ *
+ * Copyright (C) 2022 Marcus Folkesson <marcus.folkesson@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+struct pxrc_priv {
+	u8 slider;
+	u8 dial;
+	bool alternate;
+};
+
+static __u8 pxrc_rdesc_fixed[] = {
+	0x05, 0x01,        // Usage Page (Generic Desktop Ctrls)
+	0x09, 0x04,        // Usage (Joystick)
+	0xA1, 0x01,        // Collection (Application)
+	0x09, 0x01,        //   Usage (Pointer)
+	0xA1, 0x00,        //   Collection (Physical)
+	0x09, 0x30,        //     Usage (X)
+	0x09, 0x36,        //     Usage (Slider)
+	0x09, 0x31,        //     Usage (Y)
+	0x09, 0x32,        //     Usage (Z)
+	0x09, 0x33,        //     Usage (Rx)
+	0x09, 0x34,        //     Usage (Ry)
+	0x09, 0x35,        //     Usage (Rz)
+	0x09, 0x37,        //     Usage (Dial)
+	0x15, 0x00,        //     Logical Minimum (0)
+	0x26, 0xFF, 0x00,  //     Logical Maximum (255)
+	0x35, 0x00,        //     Physical Minimum (0)
+	0x46, 0xFF, 0x00,  //     Physical Maximum (255)
+	0x75, 0x08,        //     Report Size (8)
+	0x95, 0x08,        //     Report Count (8)
+	0x81, 0x02,        //     Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
+	0xC0,              //   End Collection
+	0xC0,              // End Collection
+};
+
+static __u8 *pxrc_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+				unsigned int *rsize)
+{
+	hid_info(hdev, "fixing up PXRC report descriptor\n");
+	*rsize = sizeof(pxrc_rdesc_fixed);
+	return pxrc_rdesc_fixed;
+}
+
+static int pxrc_raw_event(struct hid_device *hdev, struct hid_report *report,
+	 u8 *data, int size)
+{
+	struct pxrc_priv *priv = hid_get_drvdata(hdev);
+
+	if (priv->alternate)
+		priv->slider = data[7];
+	else
+		priv->dial = data[7];
+
+	data[1] = priv->slider;
+	data[7] = priv->dial;
+
+	priv->alternate = !priv->alternate;
+	return 0;
+}
+
+static int pxrc_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct pxrc_priv *priv;
+
+	priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	hid_set_drvdata(hdev, priv);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct hid_device_id pxrc_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MULTIPLE_1781, USB_DEVICE_ID_PHOENIXRC) },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(hid, pxrc_devices);
+
+static struct hid_driver pxrc_driver = {
+	.name = "hid-pxrc",
+	.id_table = pxrc_devices,
+	.report_fixup = pxrc_report_fixup,
+	.probe = pxrc_probe,
+	.raw_event = pxrc_raw_event,
+};
+module_hid_driver(pxrc_driver);
+
+MODULE_AUTHOR("Marcus Folkesson <marcus.folkesson@gmail.com>");
+MODULE_DESCRIPTION("HID driver for PXRC 8-axis flight controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 311eee5..bb1f423 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -237,8 +237,7 @@ static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr,
 
 			read_input_count = data->readReport[1];
 			memcpy(buf + bytes_read, &data->readReport[2],
-				read_input_count < bytes_needed ?
-					read_input_count : bytes_needed);
+				min(read_input_count, bytes_needed));
 
 			bytes_read += read_input_count;
 			bytes_needed -= read_input_count;
@@ -347,8 +346,7 @@ static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size)
 		return 0;
 	}
 
-	memcpy(hdata->readReport, data, size < hdata->input_report_size ?
-			size : hdata->input_report_size);
+	memcpy(hdata->readReport, data, min((u32)size, hdata->input_report_size));
 	set_bit(RMI_READ_DATA_PENDING, &hdata->flags);
 	wake_up(&hdata->wait);
 
diff --git a/drivers/hid/hid-roccat.c b/drivers/hid/hid-roccat.c
index 26373b8..6da80e4 100644
--- a/drivers/hid/hid-roccat.c
+++ b/drivers/hid/hid-roccat.c
@@ -257,6 +257,8 @@ int roccat_report_event(int minor, u8 const *data)
 	if (!new_value)
 		return -ENOMEM;
 
+	mutex_lock(&device->cbuf_lock);
+
 	report = &device->cbuf[device->cbuf_end];
 
 	/* passing NULL is safe */
@@ -276,6 +278,8 @@ int roccat_report_event(int minor, u8 const *data)
 			reader->cbuf_start = (reader->cbuf_start + 1) % ROCCAT_CBUF_SIZE;
 	}
 
+	mutex_unlock(&device->cbuf_lock);
+
 	wake_up_interruptible(&device->wait);
 	return 0;
 }
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 60ec2b2..03691cd 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -368,7 +368,7 @@ static const unsigned int buzz_keymap[] = {
 };
 
 /* The Navigation controller is a partial DS3 and uses the same HID report
- * and hence the same keymap indices, however not not all axes/buttons
+ * and hence the same keymap indices, however not all axes/buttons
  * are physically present. We use the same axis and button mapping as
  * the DS3, which uses the Linux gamepad spec.
  */
diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c
index fc616db..8ee43cb 100644
--- a/drivers/hid/hid-steam.c
+++ b/drivers/hid/hid-steam.c
@@ -256,7 +256,7 @@ static int steam_get_serial(struct steam_device *steam)
 	if (reply[0] != 0xae || reply[1] != 0x15 || reply[2] != 0x01)
 		return -EIO;
 	reply[3 + STEAM_SERIAL_LEN] = 0;
-	strlcpy(steam->serial_no, reply + 3, sizeof(steam->serial_no));
+	strscpy(steam->serial_no, reply + 3, sizeof(steam->serial_no));
 	return 0;
 }
 
@@ -524,7 +524,7 @@ static int steam_register(struct steam_device *steam)
 		 */
 		mutex_lock(&steam->mutex);
 		if (steam_get_serial(steam) < 0)
-			strlcpy(steam->serial_no, "XXXXXXXXXX",
+			strscpy(steam->serial_no, "XXXXXXXXXX",
 					sizeof(steam->serial_no));
 		mutex_unlock(&steam->mutex);
 
@@ -699,9 +699,9 @@ static struct hid_device *steam_create_client_hid(struct hid_device *hdev)
 	client_hdev->version = hdev->version;
 	client_hdev->type = hdev->type;
 	client_hdev->country = hdev->country;
-	strlcpy(client_hdev->name, hdev->name,
+	strscpy(client_hdev->name, hdev->name,
 			sizeof(client_hdev->name));
-	strlcpy(client_hdev->phys, hdev->phys,
+	strscpy(client_hdev->phys, hdev->phys,
 			sizeof(client_hdev->phys));
 	/*
 	 * Since we use the same device info than the real interface to
diff --git a/drivers/hid/hid-topre.c b/drivers/hid/hid-topre.c
new file mode 100644
index 0000000..88a91cd
--- /dev/null
+++ b/drivers/hid/hid-topre.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  HID driver for Topre REALFORCE Keyboards
+ *
+ *  Copyright (c) 2022 Harry Stern <harry@harrystern.net>
+ *
+ *  Based on the hid-macally driver
+ */
+
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+MODULE_AUTHOR("Harry Stern <harry@harrystern.net>");
+MODULE_DESCRIPTION("REALFORCE R2 Keyboard driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Fix the REALFORCE R2's non-boot interface's report descriptor to match the
+ * events it's actually sending. It claims to send array events but is instead
+ * sending variable events.
+ */
+static __u8 *topre_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+				 unsigned int *rsize)
+{
+	if (*rsize >= 119 && rdesc[69] == 0x29 && rdesc[70] == 0xe7 &&
+						 rdesc[71] == 0x81 && rdesc[72] == 0x00) {
+		hid_info(hdev,
+			"fixing up Topre REALFORCE keyboard report descriptor\n");
+		rdesc[72] = 0x02;
+	}
+	return rdesc;
+}
+
+static const struct hid_device_id topre_id_table[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPRE,
+			 USB_DEVICE_ID_TOPRE_REALFORCE_R2_108) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, topre_id_table);
+
+static struct hid_driver topre_driver = {
+	.name			= "topre",
+	.id_table		= topre_id_table,
+	.report_fixup		= topre_report_fixup,
+};
+
+module_hid_driver(topre_driver);
diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index 47a1737..0fbc408 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -153,6 +153,7 @@ static int uclogic_input_configured(struct hid_device *hdev,
 			suffix = "Pad";
 			break;
 		case HID_DG_PEN:
+		case HID_DG_DIGITIZER:
 			suffix = "Pen";
 			break;
 		case HID_CP_CONSUMER_CONTROL:
@@ -510,6 +511,8 @@ static const struct hid_device_id uclogic_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER,
 				USB_DEVICE_ID_UGTIZER_TABLET_GT5040) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
+				USB_DEVICE_ID_UGEE_PARBLO_A610_PRO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_TABLET_G5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_TABLET_EX07S) },
@@ -524,6 +527,8 @@ static const struct hid_device_id uclogic_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
+				USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06) },
 	{ }
 };
diff --git a/drivers/hid/hid-uclogic-params-test.c b/drivers/hid/hid-uclogic-params-test.c
new file mode 100644
index 0000000..57ef5d3
--- /dev/null
+++ b/drivers/hid/hid-uclogic-params-test.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ *  HID driver for UC-Logic devices not fully compliant with HID standard
+ *
+ *  Copyright (c) 2022 José Expósito <jose.exposito89@gmail.com>
+ */
+
+#include <kunit/test.h>
+#include "./hid-uclogic-params.h"
+#include "./hid-uclogic-rdesc.h"
+
+#define MAX_STR_DESC_SIZE 14
+
+struct uclogic_parse_ugee_v2_desc_case {
+	const char *name;
+	int res;
+	const __u8 str_desc[MAX_STR_DESC_SIZE];
+	size_t str_desc_size;
+	const s32 desc_params[UCLOGIC_RDESC_PH_ID_NUM];
+	enum uclogic_params_frame_type frame_type;
+};
+
+static struct uclogic_parse_ugee_v2_desc_case uclogic_parse_ugee_v2_desc_cases[] = {
+	{
+		.name = "invalid_str_desc",
+		.res = -EINVAL,
+		.str_desc = {},
+		.str_desc_size = 0,
+		.desc_params = {},
+		.frame_type = UCLOGIC_PARAMS_FRAME_BUTTONS,
+	},
+	{
+		.name = "resolution_with_value_0",
+		.res = 0,
+		.str_desc = {
+			0x0E, 0x03,
+			0x70, 0xB2,
+			0x10, 0x77,
+			0x08,
+			0x00,
+			0xFF, 0x1F,
+			0x00, 0x00,
+		},
+		.str_desc_size = 12,
+		.desc_params = {
+			[UCLOGIC_RDESC_PEN_PH_ID_X_LM] = 0xB270,
+			[UCLOGIC_RDESC_PEN_PH_ID_X_PM] = 0,
+			[UCLOGIC_RDESC_PEN_PH_ID_Y_LM] = 0x7710,
+			[UCLOGIC_RDESC_PEN_PH_ID_Y_PM] = 0,
+			[UCLOGIC_RDESC_PEN_PH_ID_PRESSURE_LM] = 0x1FFF,
+			[UCLOGIC_RDESC_FRAME_PH_ID_UM] = 0x08,
+		},
+		.frame_type = UCLOGIC_PARAMS_FRAME_BUTTONS,
+	},
+	/* XP-PEN Deco L str_desc: Frame with 8 buttons */
+	{
+		.name = "frame_type_buttons",
+		.res = 0,
+		.str_desc = {
+			0x0E, 0x03,
+			0x70, 0xB2,
+			0x10, 0x77,
+			0x08,
+			0x00,
+			0xFF, 0x1F,
+			0xD8, 0x13,
+		},
+		.str_desc_size = 12,
+		.desc_params = {
+			[UCLOGIC_RDESC_PEN_PH_ID_X_LM] = 0xB270,
+			[UCLOGIC_RDESC_PEN_PH_ID_X_PM] = 0x2320,
+			[UCLOGIC_RDESC_PEN_PH_ID_Y_LM] = 0x7710,
+			[UCLOGIC_RDESC_PEN_PH_ID_Y_PM] = 0x1770,
+			[UCLOGIC_RDESC_PEN_PH_ID_PRESSURE_LM] = 0x1FFF,
+			[UCLOGIC_RDESC_FRAME_PH_ID_UM] = 0x08,
+		},
+		.frame_type = UCLOGIC_PARAMS_FRAME_BUTTONS,
+	},
+	/* PARBLO A610 PRO str_desc: Frame with 9 buttons and dial */
+	{
+		.name = "frame_type_dial",
+		.res = 0,
+		.str_desc = {
+			0x0E, 0x03,
+			0x96, 0xC7,
+			0xF9, 0x7C,
+			0x09,
+			0x01,
+			0xFF, 0x1F,
+			0xD8, 0x13,
+		},
+		.str_desc_size = 12,
+		.desc_params = {
+			[UCLOGIC_RDESC_PEN_PH_ID_X_LM] = 0xC796,
+			[UCLOGIC_RDESC_PEN_PH_ID_X_PM] = 0x2749,
+			[UCLOGIC_RDESC_PEN_PH_ID_Y_LM] = 0x7CF9,
+			[UCLOGIC_RDESC_PEN_PH_ID_Y_PM] = 0x1899,
+			[UCLOGIC_RDESC_PEN_PH_ID_PRESSURE_LM] = 0x1FFF,
+			[UCLOGIC_RDESC_FRAME_PH_ID_UM] = 0x09,
+		},
+		.frame_type = UCLOGIC_PARAMS_FRAME_DIAL,
+	},
+	/* XP-PEN Deco Pro S str_desc: Frame with 8 buttons and mouse */
+	{
+		.name = "frame_type_mouse",
+		.res = 0,
+		.str_desc = {
+			0x0E, 0x03,
+			0xC8, 0xB3,
+			0x34, 0x65,
+			0x08,
+			0x02,
+			0xFF, 0x1F,
+			0xD8, 0x13,
+		},
+		.str_desc_size = 12,
+		.desc_params = {
+			[UCLOGIC_RDESC_PEN_PH_ID_X_LM] = 0xB3C8,
+			[UCLOGIC_RDESC_PEN_PH_ID_X_PM] = 0x2363,
+			[UCLOGIC_RDESC_PEN_PH_ID_Y_LM] = 0x6534,
+			[UCLOGIC_RDESC_PEN_PH_ID_Y_PM] = 0x13EC,
+			[UCLOGIC_RDESC_PEN_PH_ID_PRESSURE_LM] = 0x1FFF,
+			[UCLOGIC_RDESC_FRAME_PH_ID_UM] = 0x08,
+		},
+		.frame_type = UCLOGIC_PARAMS_FRAME_MOUSE,
+	},
+};
+
+static void uclogic_parse_ugee_v2_desc_case_desc(struct uclogic_parse_ugee_v2_desc_case *t,
+						 char *desc)
+{
+	strscpy(desc, t->name, KUNIT_PARAM_DESC_SIZE);
+}
+
+KUNIT_ARRAY_PARAM(uclogic_parse_ugee_v2_desc, uclogic_parse_ugee_v2_desc_cases,
+		  uclogic_parse_ugee_v2_desc_case_desc);
+
+static void uclogic_parse_ugee_v2_desc_test(struct kunit *test)
+{
+	int res;
+	s32 desc_params[UCLOGIC_RDESC_PH_ID_NUM];
+	enum uclogic_params_frame_type frame_type;
+	const struct uclogic_parse_ugee_v2_desc_case *params = test->param_value;
+
+	res = uclogic_params_parse_ugee_v2_desc(params->str_desc,
+						params->str_desc_size,
+						desc_params,
+						ARRAY_SIZE(desc_params),
+						&frame_type);
+	KUNIT_ASSERT_EQ(test, res, params->res);
+
+	if (res)
+		return;
+
+	KUNIT_EXPECT_EQ(test,
+			params->desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_LM],
+			desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_LM]);
+	KUNIT_EXPECT_EQ(test,
+			params->desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_PM],
+			desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_PM]);
+	KUNIT_EXPECT_EQ(test,
+			params->desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_LM],
+			desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_LM]);
+	KUNIT_EXPECT_EQ(test,
+			params->desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_PM],
+			desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_PM]);
+	KUNIT_EXPECT_EQ(test,
+			params->desc_params[UCLOGIC_RDESC_PEN_PH_ID_PRESSURE_LM],
+			desc_params[UCLOGIC_RDESC_PEN_PH_ID_PRESSURE_LM]);
+	KUNIT_EXPECT_EQ(test,
+			params->desc_params[UCLOGIC_RDESC_FRAME_PH_ID_UM],
+			desc_params[UCLOGIC_RDESC_FRAME_PH_ID_UM]);
+	KUNIT_EXPECT_EQ(test, params->frame_type, frame_type);
+}
+
+static struct kunit_case hid_uclogic_params_test_cases[] = {
+	KUNIT_CASE_PARAM(uclogic_parse_ugee_v2_desc_test,
+			 uclogic_parse_ugee_v2_desc_gen_params),
+	{}
+};
+
+static struct kunit_suite hid_uclogic_params_test_suite = {
+	.name = "hid_uclogic_params_test",
+	.test_cases = hid_uclogic_params_test_cases,
+};
+
+kunit_test_suite(hid_uclogic_params_test_suite);
+
+MODULE_DESCRIPTION("KUnit tests for the UC-Logic driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("José Expósito <jose.exposito89@gmail.com>");
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index c11fa23..34fa991 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -1057,6 +1057,161 @@ cleanup:
 }
 
 /**
+ * uclogic_params_parse_ugee_v2_desc - parse the string descriptor containing
+ * pen and frame parameters returned by UGEE v2 devices.
+ *
+ * @str_desc:		String descriptor, cannot be NULL.
+ * @str_desc_size:	Size of the string descriptor.
+ * @desc_params:	Output description params list.
+ * @desc_params_size:	Size of the output description params list.
+ * @frame_type:		Output frame type.
+ *
+ * Returns:
+ *	Zero, if successful. A negative errno code on error.
+ */
+static int uclogic_params_parse_ugee_v2_desc(const __u8 *str_desc,
+					     size_t str_desc_size,
+					     s32 *desc_params,
+					     size_t desc_params_size,
+					     enum uclogic_params_frame_type *frame_type)
+{
+	s32 pen_x_lm, pen_y_lm;
+	s32 pen_x_pm, pen_y_pm;
+	s32 pen_pressure_lm;
+	s32 frame_num_buttons;
+	s32 resolution;
+
+	/* Minimum descriptor length required, maximum seen so far is 14 */
+	const int min_str_desc_size = 12;
+
+	if (!str_desc || str_desc_size < min_str_desc_size)
+		return -EINVAL;
+
+	if (desc_params_size != UCLOGIC_RDESC_PH_ID_NUM)
+		return -EINVAL;
+
+	pen_x_lm = get_unaligned_le16(str_desc + 2);
+	pen_y_lm = get_unaligned_le16(str_desc + 4);
+	frame_num_buttons = str_desc[6];
+	*frame_type = str_desc[7];
+	pen_pressure_lm = get_unaligned_le16(str_desc + 8);
+
+	resolution = get_unaligned_le16(str_desc + 10);
+	if (resolution == 0) {
+		pen_x_pm = 0;
+		pen_y_pm = 0;
+	} else {
+		pen_x_pm = pen_x_lm * 1000 / resolution;
+		pen_y_pm = pen_y_lm * 1000 / resolution;
+	}
+
+	desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_LM] = pen_x_lm;
+	desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_PM] = pen_x_pm;
+	desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_LM] = pen_y_lm;
+	desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_PM] = pen_y_pm;
+	desc_params[UCLOGIC_RDESC_PEN_PH_ID_PRESSURE_LM] = pen_pressure_lm;
+	desc_params[UCLOGIC_RDESC_FRAME_PH_ID_UM] = frame_num_buttons;
+
+	return 0;
+}
+
+/**
+ * uclogic_params_ugee_v2_init_frame_buttons() - initialize a UGEE v2 frame with
+ * buttons.
+ * @p:			Parameters to fill in, cannot be NULL.
+ * @desc_params:	Device description params list.
+ * @desc_params_size:	Size of the description params list.
+ *
+ * Returns:
+ *	Zero, if successful. A negative errno code on error.
+ */
+static int uclogic_params_ugee_v2_init_frame_buttons(struct uclogic_params *p,
+						     const s32 *desc_params,
+						     size_t desc_params_size)
+{
+	__u8 *rdesc_frame = NULL;
+	int rc = 0;
+
+	if (!p || desc_params_size != UCLOGIC_RDESC_PH_ID_NUM)
+		return -EINVAL;
+
+	rdesc_frame = uclogic_rdesc_template_apply(
+				uclogic_rdesc_ugee_v2_frame_btn_template_arr,
+				uclogic_rdesc_ugee_v2_frame_btn_template_size,
+				desc_params, UCLOGIC_RDESC_PH_ID_NUM);
+	if (!rdesc_frame)
+		return -ENOMEM;
+
+	rc = uclogic_params_frame_init_with_desc(&p->frame_list[0],
+						 rdesc_frame,
+						 uclogic_rdesc_ugee_v2_frame_btn_template_size,
+						 UCLOGIC_RDESC_V1_FRAME_ID);
+	kfree(rdesc_frame);
+	return rc;
+}
+
+/**
+ * uclogic_params_ugee_v2_init_frame_dial() - initialize a UGEE v2 frame with a
+ * bitmap dial.
+ * @p:			Parameters to fill in, cannot be NULL.
+ * @desc_params:	Device description params list.
+ * @desc_params_size:	Size of the description params list.
+ *
+ * Returns:
+ *	Zero, if successful. A negative errno code on error.
+ */
+static int uclogic_params_ugee_v2_init_frame_dial(struct uclogic_params *p,
+						  const s32 *desc_params,
+						  size_t desc_params_size)
+{
+	__u8 *rdesc_frame = NULL;
+	int rc = 0;
+
+	if (!p || desc_params_size != UCLOGIC_RDESC_PH_ID_NUM)
+		return -EINVAL;
+
+	rdesc_frame = uclogic_rdesc_template_apply(
+				uclogic_rdesc_ugee_v2_frame_dial_template_arr,
+				uclogic_rdesc_ugee_v2_frame_dial_template_size,
+				desc_params, UCLOGIC_RDESC_PH_ID_NUM);
+	if (!rdesc_frame)
+		return -ENOMEM;
+
+	rc = uclogic_params_frame_init_with_desc(&p->frame_list[0],
+						 rdesc_frame,
+						 uclogic_rdesc_ugee_v2_frame_dial_template_size,
+						 UCLOGIC_RDESC_V1_FRAME_ID);
+	kfree(rdesc_frame);
+	if (rc)
+		return rc;
+
+	p->frame_list[0].bitmap_dial_byte = 7;
+	return 0;
+}
+
+/**
+ * uclogic_params_ugee_v2_init_frame_mouse() - initialize a UGEE v2 frame with a
+ * mouse.
+ * @p:			Parameters to fill in, cannot be NULL.
+ *
+ * Returns:
+ *	Zero, if successful. A negative errno code on error.
+ */
+static int uclogic_params_ugee_v2_init_frame_mouse(struct uclogic_params *p)
+{
+	int rc = 0;
+
+	if (!p)
+		return -EINVAL;
+
+	rc = uclogic_params_frame_init_with_desc(&p->frame_list[1],
+						 uclogic_rdesc_ugee_v2_frame_mouse_template_arr,
+						 uclogic_rdesc_ugee_v2_frame_mouse_template_size,
+						 UCLOGIC_RDESC_V1_FRAME_ID);
+	return rc;
+}
+
+/**
  * uclogic_params_ugee_v2_init() - initialize a UGEE graphics tablets by
  * discovering their parameters.
  *
@@ -1084,9 +1239,8 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
 	const int str_desc_len = 12;
 	__u8 *str_desc = NULL;
 	__u8 *rdesc_pen = NULL;
-	__u8 *rdesc_frame = NULL;
 	s32 desc_params[UCLOGIC_RDESC_PH_ID_NUM];
-	s32 resolution;
+	enum uclogic_params_frame_type frame_type;
 	__u8 magic_arr[] = {
 		0x02, 0xb0, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 	};
@@ -1100,6 +1254,15 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
 
 	iface = to_usb_interface(hdev->dev.parent);
 	bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
+
+	if (bInterfaceNumber == 0) {
+		rc = uclogic_params_ugee_v2_init_frame_mouse(&p);
+		if (rc)
+			goto cleanup;
+
+		goto output;
+	}
+
 	if (bInterfaceNumber != 2) {
 		uclogic_params_init_invalid(&p);
 		goto output;
@@ -1128,25 +1291,13 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
 		goto output;
 	}
 
-	desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_LM] =
-		get_unaligned_le16(str_desc + 2);
-	desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_LM] =
-		get_unaligned_le16(str_desc + 4);
-	desc_params[UCLOGIC_RDESC_FRAME_PH_ID_UM] = str_desc[6];
-	desc_params[UCLOGIC_RDESC_PEN_PH_ID_PRESSURE_LM] =
-		get_unaligned_le16(str_desc + 8);
-	resolution = get_unaligned_le16(str_desc + 10);
-	if (resolution == 0) {
-		desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_PM] = 0;
-		desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_PM] = 0;
-	} else {
-		desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_PM] =
-			desc_params[UCLOGIC_RDESC_PEN_PH_ID_X_LM] * 1000 /
-			resolution;
-		desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_PM] =
-			desc_params[UCLOGIC_RDESC_PEN_PH_ID_Y_LM] * 1000 /
-			resolution;
-	}
+	rc = uclogic_params_parse_ugee_v2_desc(str_desc, str_desc_len,
+					       desc_params,
+					       ARRAY_SIZE(desc_params),
+					       &frame_type);
+	if (rc)
+		goto cleanup;
+
 	kfree(str_desc);
 	str_desc = NULL;
 
@@ -1167,24 +1318,21 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
 	p.pen.subreport_list[0].id = UCLOGIC_RDESC_V1_FRAME_ID;
 
 	/* Initialize the frame interface */
-	rdesc_frame = uclogic_rdesc_template_apply(
-				uclogic_rdesc_ugee_v2_frame_btn_template_arr,
-				uclogic_rdesc_ugee_v2_frame_btn_template_size,
-				desc_params, ARRAY_SIZE(desc_params));
-	if (!rdesc_frame) {
-		rc = -ENOMEM;
-		goto cleanup;
+	switch (frame_type) {
+	case UCLOGIC_PARAMS_FRAME_DIAL:
+	case UCLOGIC_PARAMS_FRAME_MOUSE:
+		rc = uclogic_params_ugee_v2_init_frame_dial(&p, desc_params,
+							    ARRAY_SIZE(desc_params));
+		break;
+	case UCLOGIC_PARAMS_FRAME_BUTTONS:
+	default:
+		rc = uclogic_params_ugee_v2_init_frame_buttons(&p, desc_params,
+							       ARRAY_SIZE(desc_params));
+		break;
 	}
 
-	rc = uclogic_params_frame_init_with_desc(&p.frame_list[0],
-						 rdesc_frame,
-						 uclogic_rdesc_ugee_v2_frame_btn_template_size,
-						 UCLOGIC_RDESC_V1_FRAME_ID);
-	kfree(rdesc_frame);
-	if (rc) {
-		uclogic_params_init_invalid(&p);
-		goto output;
-	}
+	if (rc)
+		goto cleanup;
 
 output:
 	/* Output parameters */
@@ -1433,7 +1581,11 @@ int uclogic_params_init(struct uclogic_params *params,
 		}
 		break;
 	case VID_PID(USB_VENDOR_ID_UGEE,
+		     USB_DEVICE_ID_UGEE_PARBLO_A610_PRO):
+	case VID_PID(USB_VENDOR_ID_UGEE,
 		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L):
+	case VID_PID(USB_VENDOR_ID_UGEE,
+		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S):
 		rc = uclogic_params_ugee_v2_init(&p, hdev);
 		if (rc != 0)
 			goto cleanup;
@@ -1517,3 +1669,7 @@ cleanup:
 	uclogic_params_cleanup(&p);
 	return rc;
 }
+
+#ifdef CONFIG_HID_KUNIT_TEST
+#include "hid-uclogic-params-test.c"
+#endif
diff --git a/drivers/hid/hid-uclogic-params.h b/drivers/hid/hid-uclogic-params.h
index 5bef8da..a97477c 100644
--- a/drivers/hid/hid-uclogic-params.h
+++ b/drivers/hid/hid-uclogic-params.h
@@ -29,6 +29,16 @@ enum uclogic_params_pen_inrange {
 	UCLOGIC_PARAMS_PEN_INRANGE_NONE,
 };
 
+/* Types of frames */
+enum uclogic_params_frame_type {
+	/* Frame with buttons */
+	UCLOGIC_PARAMS_FRAME_BUTTONS = 0,
+	/* Frame with buttons and a dial */
+	UCLOGIC_PARAMS_FRAME_DIAL,
+	/* Frame with buttons and a mouse (shaped as a dial + touchpad) */
+	UCLOGIC_PARAMS_FRAME_MOUSE,
+};
+
 /*
  * Pen report's subreport data.
  */
diff --git a/drivers/hid/hid-uclogic-rdesc-test.c b/drivers/hid/hid-uclogic-rdesc-test.c
index ebebffe..3971a08 100644
--- a/drivers/hid/hid-uclogic-rdesc-test.c
+++ b/drivers/hid/hid-uclogic-rdesc-test.c
@@ -97,7 +97,7 @@ static const __u8 template_params_none[] = {
 
 static struct uclogic_template_case uclogic_template_cases[] = {
 	{
-		.name = "Empty template",
+		.name = "empty_template",
 		.template = template_empty,
 		.template_size = sizeof(template_empty),
 		.param_list = params_pen_all,
@@ -105,7 +105,7 @@ static struct uclogic_template_case uclogic_template_cases[] = {
 		.expected = template_empty,
 	},
 	{
-		.name = "Template smaller than the placeholder",
+		.name = "template_smaller_than_the_placeholder",
 		.template = template_small,
 		.template_size = sizeof(template_small),
 		.param_list = params_pen_all,
@@ -113,7 +113,7 @@ static struct uclogic_template_case uclogic_template_cases[] = {
 		.expected = template_small,
 	},
 	{
-		.name = "No placeholder",
+		.name = "no_placeholder",
 		.template = template_no_ph,
 		.template_size = sizeof(template_no_ph),
 		.param_list = params_pen_all,
@@ -121,7 +121,7 @@ static struct uclogic_template_case uclogic_template_cases[] = {
 		.expected = template_no_ph,
 	},
 	{
-		.name = "Pen placeholder at the end, without ID",
+		.name = "pen_placeholder_at_the_end_without_id",
 		.template = template_pen_ph_end,
 		.template_size = sizeof(template_pen_ph_end),
 		.param_list = params_pen_all,
@@ -129,7 +129,7 @@ static struct uclogic_template_case uclogic_template_cases[] = {
 		.expected = template_pen_ph_end,
 	},
 	{
-		.name = "Frame button placeholder at the end, without ID",
+		.name = "frame_button_placeholder_at_the_end_without_id",
 		.template = template_btn_ph_end,
 		.template_size = sizeof(template_btn_ph_end),
 		.param_list = params_frame_all,
@@ -137,7 +137,7 @@ static struct uclogic_template_case uclogic_template_cases[] = {
 		.expected = template_btn_ph_end,
 	},
 	{
-		.name = "All params present in the pen template",
+		.name = "all_params_present_in_the_pen_template",
 		.template = template_pen_all_params,
 		.template_size = sizeof(template_pen_all_params),
 		.param_list = params_pen_all,
@@ -145,7 +145,7 @@ static struct uclogic_template_case uclogic_template_cases[] = {
 		.expected = expected_pen_all_params,
 	},
 	{
-		.name = "All params present in the frame template",
+		.name = "all_params_present_in_the_frame_template",
 		.template = template_frame_all_params,
 		.template_size = sizeof(template_frame_all_params),
 		.param_list = params_frame_all,
@@ -153,7 +153,7 @@ static struct uclogic_template_case uclogic_template_cases[] = {
 		.expected = expected_frame_all_params,
 	},
 	{
-		.name = "Some params present in the pen template (complete param list)",
+		.name = "some_params_present_in_the_pen_template_with_complete_param_list",
 		.template = template_pen_some_params,
 		.template_size = sizeof(template_pen_some_params),
 		.param_list = params_pen_all,
@@ -161,7 +161,7 @@ static struct uclogic_template_case uclogic_template_cases[] = {
 		.expected = expected_pen_some_params,
 	},
 	{
-		.name = "Some params present in the pen template (incomplete param list)",
+		.name = "some_params_present_in_the_pen_template_with_incomplete_param_list",
 		.template = template_pen_some_params,
 		.template_size = sizeof(template_pen_some_params),
 		.param_list = params_pen_some,
@@ -169,7 +169,7 @@ static struct uclogic_template_case uclogic_template_cases[] = {
 		.expected = expected_pen_some_params,
 	},
 	{
-		.name = "No params present in the template",
+		.name = "no_params_present_in_the_template",
 		.template = template_params_none,
 		.template_size = sizeof(template_params_none),
 		.param_list = params_pen_some,
@@ -208,7 +208,7 @@ static struct kunit_case hid_uclogic_rdesc_test_cases[] = {
 };
 
 static struct kunit_suite hid_uclogic_rdesc_test_suite = {
-	.name = "hid-uclogic-rdesc-test",
+	.name = "hid_uclogic_rdesc_test",
 	.test_cases = hid_uclogic_rdesc_test_cases,
 };
 
diff --git a/drivers/hid/hid-uclogic-rdesc.c b/drivers/hid/hid-uclogic-rdesc.c
index 3d68e8b..4bd54c4 100644
--- a/drivers/hid/hid-uclogic-rdesc.c
+++ b/drivers/hid/hid-uclogic-rdesc.c
@@ -961,6 +961,80 @@ const __u8 uclogic_rdesc_ugee_v2_frame_btn_template_arr[] = {
 const size_t uclogic_rdesc_ugee_v2_frame_btn_template_size =
 			sizeof(uclogic_rdesc_ugee_v2_frame_btn_template_arr);
 
+/* Fixed report descriptor template for UGEE v2 frame reports (dial) */
+const __u8 uclogic_rdesc_ugee_v2_frame_dial_template_arr[] = {
+	0x05, 0x01,         /*  Usage Page (Desktop),                   */
+	0x09, 0x07,         /*  Usage (Keypad),                         */
+	0xA1, 0x01,         /*  Collection (Application),               */
+	0x85, UCLOGIC_RDESC_V1_FRAME_ID,
+			    /*      Report ID,                          */
+	0x05, 0x0D,         /*      Usage Page (Digitizer),             */
+	0x09, 0x39,         /*      Usage (Tablet Function Keys),       */
+	0xA0,               /*      Collection (Physical),              */
+	0x75, 0x01,         /*          Report Size (1),                */
+	0x95, 0x08,         /*          Report Count (8),               */
+	0x81, 0x01,         /*          Input (Constant),               */
+	0x05, 0x09,         /*          Usage Page (Button),            */
+	0x19, 0x01,         /*          Usage Minimum (01h),            */
+	UCLOGIC_RDESC_FRAME_PH_BTN,
+			    /*          Usage Maximum (PLACEHOLDER),    */
+	0x95, 0x0A,         /*          Report Count (10),              */
+	0x14,               /*          Logical Minimum (0),            */
+	0x25, 0x01,         /*          Logical Maximum (1),            */
+	0x81, 0x02,         /*          Input (Variable),               */
+	0x95, 0x06,         /*          Report Count (6),               */
+	0x81, 0x01,         /*          Input (Constant),               */
+	0x75, 0x08,         /*          Report Size (8),                */
+	0x95, 0x03,         /*          Report Count (3),               */
+	0x81, 0x01,         /*          Input (Constant),               */
+	0x05, 0x01,         /*          Usage Page (Desktop),           */
+	0x09, 0x38,         /*          Usage (Wheel),                  */
+	0x95, 0x01,         /*          Report Count (1),               */
+	0x15, 0xFF,         /*          Logical Minimum (-1),           */
+	0x25, 0x01,         /*          Logical Maximum (1),            */
+	0x81, 0x06,         /*          Input (Variable, Relative),     */
+	0x95, 0x02,         /*          Report Count (2),               */
+	0x81, 0x01,         /*          Input (Constant),               */
+	0xC0,               /*      End Collection,                     */
+	0xC0                /*  End Collection                          */
+};
+const size_t uclogic_rdesc_ugee_v2_frame_dial_template_size =
+			sizeof(uclogic_rdesc_ugee_v2_frame_dial_template_arr);
+
+/* Fixed report descriptor template for UGEE v2 frame reports (mouse) */
+const __u8 uclogic_rdesc_ugee_v2_frame_mouse_template_arr[] = {
+	0x05, 0x01,         /*  Usage Page (Desktop),                   */
+	0x09, 0x02,         /*  Usage (Mouse),                          */
+	0xA1, 0x01,         /*  Collection (Application),               */
+	0x85, 0x01,         /*      Report ID (1),                      */
+	0x05, 0x01,         /*      Usage Page (Pointer),               */
+	0xA0,               /*      Collection (Physical),              */
+	0x75, 0x01,         /*          Report Size (1),                */
+	0x95, 0x02,         /*          Report Count (2),               */
+	0x05, 0x09,         /*          Usage Page (Button),            */
+	0x19, 0x01,         /*          Usage Minimum (01h),            */
+	0x29, 0x02,         /*          Usage Maximum (02h),            */
+	0x14,               /*          Logical Minimum (0),            */
+	0x25, 0x01,         /*          Logical Maximum (1),            */
+	0x81, 0x02,         /*          Input (Variable),               */
+	0x95, 0x06,         /*          Report Count (6),               */
+	0x81, 0x01,         /*          Input (Constant),               */
+	0x05, 0x01,         /*          Usage Page (Generic Desktop),   */
+	0x09, 0x30,         /*          Usage (X),                      */
+	0x09, 0x31,         /*          Usage (Y),                      */
+	0x75, 0x10,         /*          Report Size (16),               */
+	0x95, 0x02,         /*          Report Count (2),               */
+	0x16, 0x00, 0x80,   /*          Logical Minimum (-32768),       */
+	0x26, 0xFF, 0x7F,   /*          Logical Maximum (32767),        */
+	0x81, 0x06,         /*          Input (Variable, Relative),     */
+	0x95, 0x01,         /*          Report Count (1),               */
+	0x81, 0x01,         /*          Input (Constant),               */
+	0xC0,               /*      End Collection,                     */
+	0xC0                /*  End Collection                          */
+};
+const size_t uclogic_rdesc_ugee_v2_frame_mouse_template_size =
+			sizeof(uclogic_rdesc_ugee_v2_frame_mouse_template_arr);
+
 /* Fixed report descriptor for Ugee EX07 frame */
 const __u8 uclogic_rdesc_ugee_ex07_frame_arr[] = {
 	0x05, 0x01,             /*  Usage Page (Desktop),                   */
@@ -1113,7 +1187,7 @@ __u8 *uclogic_rdesc_template_apply(const __u8 *template_ptr,
 		    memcmp(p, pen_head, sizeof(pen_head)) == 0 &&
 		    p[sizeof(pen_head)] < param_num) {
 			v = param_list[p[sizeof(pen_head)]];
-			put_unaligned(cpu_to_le32(v), (s32 *)p);
+			put_unaligned((__force u32)cpu_to_le32(v), (s32 *)p);
 			p += sizeof(pen_head) + 1;
 		} else if (memcmp(p, btn_head, sizeof(btn_head)) == 0 &&
 			   p[sizeof(btn_head)] < param_num) {
diff --git a/drivers/hid/hid-uclogic-rdesc.h b/drivers/hid/hid-uclogic-rdesc.h
index 86e64a9..0502a06 100644
--- a/drivers/hid/hid-uclogic-rdesc.h
+++ b/drivers/hid/hid-uclogic-rdesc.h
@@ -169,6 +169,14 @@ extern const size_t uclogic_rdesc_ugee_v2_pen_template_size;
 extern const __u8 uclogic_rdesc_ugee_v2_frame_btn_template_arr[];
 extern const size_t uclogic_rdesc_ugee_v2_frame_btn_template_size;
 
+/* Fixed report descriptor template for UGEE v2 frame reports (dial) */
+extern const __u8 uclogic_rdesc_ugee_v2_frame_dial_template_arr[];
+extern const size_t uclogic_rdesc_ugee_v2_frame_dial_template_size;
+
+/* Fixed report descriptor template for UGEE v2 frame reports (mouse) */
+extern const __u8 uclogic_rdesc_ugee_v2_frame_mouse_template_arr[];
+extern const size_t uclogic_rdesc_ugee_v2_frame_mouse_template_size;
+
 /* Fixed report descriptor for Ugee EX07 frame */
 extern const __u8 uclogic_rdesc_ugee_ex07_frame_arr[];
 extern const size_t uclogic_rdesc_ugee_ex07_frame_size;
diff --git a/drivers/hid/hid-vivaldi-common.c b/drivers/hid/hid-vivaldi-common.c
index 8b3e515..b0af2be 100644
--- a/drivers/hid/hid-vivaldi-common.c
+++ b/drivers/hid/hid-vivaldi-common.c
@@ -116,25 +116,26 @@ static struct attribute *vivaldi_sysfs_attrs[] = {
 	NULL
 };
 
-static const struct attribute_group vivaldi_attribute_group = {
-	.attrs = vivaldi_sysfs_attrs,
-};
-
-/**
- * vivaldi_input_configured - Complete initialization of device using vivaldi map
- * @hdev: HID device to which vivaldi attributes should be attached
- * @hidinput: HID input device (unused)
- */
-int vivaldi_input_configured(struct hid_device *hdev,
-			     struct hid_input *hidinput)
+static umode_t vivaldi_is_visible(struct kobject *kobj, struct attribute *attr,
+				  int n)
 {
+	struct hid_device *hdev = to_hid_device(kobj_to_dev(kobj));
 	struct vivaldi_data *data = hid_get_drvdata(hdev);
 
 	if (!data->num_function_row_keys)
 		return 0;
-
-	return devm_device_add_group(&hdev->dev, &vivaldi_attribute_group);
+	return attr->mode;
 }
-EXPORT_SYMBOL_GPL(vivaldi_input_configured);
+
+static const struct attribute_group vivaldi_attribute_group = {
+	.attrs = vivaldi_sysfs_attrs,
+	.is_visible = vivaldi_is_visible,
+};
+
+const struct attribute_group *vivaldi_attribute_groups[] = {
+	&vivaldi_attribute_group,
+	NULL,
+};
+EXPORT_SYMBOL_GPL(vivaldi_attribute_groups);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-vivaldi-common.h b/drivers/hid/hid-vivaldi-common.h
index d42e82d..ba9adfa 100644
--- a/drivers/hid/hid-vivaldi-common.h
+++ b/drivers/hid/hid-vivaldi-common.h
@@ -4,13 +4,11 @@
 
 struct hid_device;
 struct hid_field;
-struct hid_input;
 struct hid_usage;
 
 void vivaldi_feature_mapping(struct hid_device *hdev,
 			     struct hid_field *field, struct hid_usage *usage);
 
-int vivaldi_input_configured(struct hid_device *hdev,
-			     struct hid_input *hidinput);
+extern const struct attribute_group *vivaldi_attribute_groups[];
 
 #endif /* _HID_VIVALDI_COMMON_H */
diff --git a/drivers/hid/hid-vivaldi.c b/drivers/hid/hid-vivaldi.c
index 3a97912..cda5938 100644
--- a/drivers/hid/hid-vivaldi.c
+++ b/drivers/hid/hid-vivaldi.c
@@ -45,7 +45,9 @@ static struct hid_driver hid_vivaldi = {
 	.id_table = vivaldi_table,
 	.probe = vivaldi_probe,
 	.feature_mapping = vivaldi_feature_mapping,
-	.input_configured = vivaldi_input_configured,
+	.driver = {
+		.dev_groups = vivaldi_attribute_groups,
+	},
 };
 
 module_hid_driver(hid_vivaldi);
diff --git a/drivers/hid/hid-vrc2.c b/drivers/hid/hid-vrc2.c
new file mode 100644
index 0000000..80a2b7e
--- /dev/null
+++ b/drivers/hid/hid-vrc2.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HID driver for VRC-2 2-axis Car controller
+ *
+ * Copyright (C) 2022 Marcus Folkesson <marcus.folkesson@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+/*
+ * VID/PID are probably "borrowed", so keep them locally and
+ * do not populate hid-ids.h with those.
+ */
+#define USB_VENDOR_ID_VRC2	(0x07c0)
+#define USB_DEVICE_ID_VRC2	(0x1125)
+
+static __u8 vrc2_rdesc_fixed[] = {
+	0x05, 0x01,        // Usage Page (Generic Desktop Ctrls)
+	0x09, 0x04,        // Usage (Joystick)
+	0xA1, 0x01,        // Collection (Application)
+	0x09, 0x01,        //   Usage (Pointer)
+	0xA1, 0x00,        //   Collection (Physical)
+	0x09, 0x30,        //     Usage (X)
+	0x09, 0x31,        //     Usage (Y)
+	0x15, 0x00,        //     Logical Minimum (0)
+	0x26, 0xFF, 0x07,  //     Logical Maximum (2047)
+	0x35, 0x00,        //     Physical Minimum (0)
+	0x46, 0xFF, 0x00,  //     Physical Maximum (255)
+	0x75, 0x10,        //     Report Size (16)
+	0x95, 0x02,        //     Report Count (2)
+	0x81, 0x02,        //     Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
+	0xC0,              //   End Collection
+	0x75, 0x08,        //   Report Size (8)
+	0x95, 0x03,        //   Report Count (3)
+	0x81, 0x03,        //   Input (Cnst,Var,Abs)
+	0xC0,              // End Collection
+};
+
+static __u8 *vrc2_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+				unsigned int *rsize)
+{
+	hid_info(hdev, "fixing up VRC-2 report descriptor\n");
+	*rsize = sizeof(vrc2_rdesc_fixed);
+	return vrc2_rdesc_fixed;
+}
+
+static int vrc2_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	/*
+	 * The device gives us 2 separate USB endpoints.
+	 * One of those (the one with report descriptor size of 23) is just bogus so ignore it
+	 */
+	if (hdev->dev_rsize == 23)
+		return -ENODEV;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct hid_device_id vrc2_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_VRC2, USB_DEVICE_ID_VRC2) },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(hid, vrc2_devices);
+
+static struct hid_driver vrc2_driver = {
+	.name = "vrc2",
+	.id_table = vrc2_devices,
+	.report_fixup = vrc2_report_fixup,
+	.probe = vrc2_probe,
+};
+module_hid_driver(vrc2_driver);
+
+MODULE_AUTHOR("Marcus Folkesson <marcus.folkesson@gmail.com>");
+MODULE_DESCRIPTION("HID driver for VRC-2 2-axis Car controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 95cefae..0667b60 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -1036,7 +1036,7 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
 
 	snprintf(hid->name, sizeof(hid->name), "%s %04X:%04X",
 		 client->name, (u16)hid->vendor, (u16)hid->product);
-	strlcpy(hid->phys, dev_name(&client->dev), sizeof(hid->phys));
+	strscpy(hid->phys, dev_name(&client->dev), sizeof(hid->phys));
 
 	ihid->quirks = i2c_hid_lookup_quirk(hid->vendor, hid->product);
 
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 4490e2f..be4c731 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -1381,7 +1381,7 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *
 		hid->type = HID_TYPE_USBNONE;
 
 	if (dev->manufacturer)
-		strlcpy(hid->name, dev->manufacturer, sizeof(hid->name));
+		strscpy(hid->name, dev->manufacturer, sizeof(hid->name));
 
 	if (dev->product) {
 		if (dev->manufacturer)
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index b4b007c..c439ed2 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -294,7 +294,7 @@ static int usb_kbd_probe(struct usb_interface *iface,
 	spin_lock_init(&kbd->leds_lock);
 
 	if (dev->manufacturer)
-		strlcpy(kbd->name, dev->manufacturer, sizeof(kbd->name));
+		strscpy(kbd->name, dev->manufacturer, sizeof(kbd->name));
 
 	if (dev->product) {
 		if (dev->manufacturer)
diff --git a/drivers/hid/usbhid/usbmouse.c b/drivers/hid/usbhid/usbmouse.c
index fb1d7d1..3fd93c2 100644
--- a/drivers/hid/usbhid/usbmouse.c
+++ b/drivers/hid/usbhid/usbmouse.c
@@ -142,7 +142,7 @@ static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_i
 	mouse->dev = input_dev;
 
 	if (dev->manufacturer)
-		strlcpy(mouse->name, dev->manufacturer, sizeof(mouse->name));
+		strscpy(mouse->name, dev->manufacturer, sizeof(mouse->name));
 
 	if (dev->product) {
 		if (dev->manufacturer)
diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h
index 3f8b24a..4da50e1 100644
--- a/drivers/hid/wacom.h
+++ b/drivers/hid/wacom.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * drivers/input/tablet/wacom.h
- *
  *  USB Wacom tablet support
  *
  *  Copyright (c) 2000-2004 Vojtech Pavlik	<vojtech@ucw.cz>
@@ -78,10 +76,9 @@
  *                 - integration of the Bluetooth devices
  */
 
-/*
- */
 #ifndef WACOM_H
 #define WACOM_H
+
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 194a2e3..634263e 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -1,13 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * drivers/input/tablet/wacom_sys.c
- *
  *  USB Wacom tablet support - system specific code
  */
 
-/*
- */
-
 #include "wacom_wac.h"
 #include "wacom.h"
 #include <linux/input/mt.h>
@@ -2226,7 +2221,7 @@ static void wacom_update_name(struct wacom *wacom, const char *suffix)
 		} else if (strstr(product_name, "Wacom") ||
 			   strstr(product_name, "wacom") ||
 			   strstr(product_name, "WACOM")) {
-			strlcpy(name, product_name, sizeof(name));
+			strscpy(name, product_name, sizeof(name));
 		} else {
 			snprintf(name, sizeof(name), "Wacom %s", product_name);
 		}
@@ -2244,7 +2239,7 @@ static void wacom_update_name(struct wacom *wacom, const char *suffix)
 		if (name[strlen(name)-1] == ' ')
 			name[strlen(name)-1] = '\0';
 	} else {
-		strlcpy(name, features->name, sizeof(name));
+		strscpy(name, features->name, sizeof(name));
 	}
 
 	snprintf(wacom_wac->name, sizeof(wacom_wac->name), "%s%s",
@@ -2509,7 +2504,7 @@ static void wacom_wireless_work(struct work_struct *work)
 				goto fail;
 		}
 
-		strlcpy(wacom_wac->name, wacom_wac1->name,
+		strscpy(wacom_wac->name, wacom_wac1->name,
 			sizeof(wacom_wac->name));
 		error = wacom_initialize_battery(wacom);
 		if (error)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index d049239..7748696 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1,13 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * drivers/input/tablet/wacom_wac.c
- *
  *  USB Wacom tablet support - Wacom specific code
  */
 
-/*
- */
-
 #include "wacom_wac.h"
 #include "wacom.h"
 #include <linux/input/mt.h>
@@ -713,11 +708,14 @@ static int wacom_intuos_get_tool_type(int tool_id)
 	case 0x802: /* Intuos4/5 13HD/24HD General Pen */
 	case 0x8e2: /* IntuosHT2 pen */
 	case 0x022:
+	case 0x200: /* Pro Pen 3 */
+	case 0x04200: /* Pro Pen 3 */
 	case 0x10842: /* MobileStudio Pro Pro Pen slim */
 	case 0x14802: /* Intuos4/5 13HD/24HD Classic Pen */
 	case 0x16802: /* Cintiq 13HD Pro Pen */
 	case 0x18802: /* DTH2242 Pen */
 	case 0x10802: /* Intuos4/5 13HD/24HD General Pen */
+	case 0x80842: /* Intuos Pro and Cintiq Pro 3D Pen */
 		tool_type = BTN_TOOL_PEN;
 		break;
 
@@ -4875,6 +4873,10 @@ static const struct wacom_features wacom_features_0x3c6 =
 static const struct wacom_features wacom_features_0x3c8 =
 	{ "Wacom Intuos BT M", 21600, 13500, 4095, 63,
 	  INTUOSHT3_BT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4 };
+static const struct wacom_features wacom_features_0x3dd =
+	{ "Wacom Intuos Pro S", 31920, 19950, 8191, 63,
+	  INTUOSP2S_BT, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7,
+	  .touch_max = 10 };
 
 static const struct wacom_features wacom_features_HID_ANY_ID =
 	{ "Wacom HID", .type = HID_GENERIC, .oVid = HID_ANY_ID, .oPid = HID_ANY_ID };
@@ -5050,6 +5052,7 @@ const struct hid_device_id wacom_ids[] = {
 	{ BT_DEVICE_WACOM(0x393) },
 	{ BT_DEVICE_WACOM(0x3c6) },
 	{ BT_DEVICE_WACOM(0x3c8) },
+	{ BT_DEVICE_WACOM(0x3dd) },
 	{ USB_DEVICE_WACOM(0x4001) },
 	{ USB_DEVICE_WACOM(0x4004) },
 	{ USB_DEVICE_WACOM(0x5000) },
diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index fef1538..5ca6c06 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * drivers/input/tablet/wacom_wac.h
- */
+
 #ifndef WACOM_WAC_H
 #define WACOM_WAC_H
 
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 4363a63..8677ae3 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -314,15 +314,6 @@ struct hid_item {
 #define HID_BAT_ABSOLUTESTATEOFCHARGE	0x00850065
 
 #define HID_VD_ASUS_CUSTOM_MEDIA_KEYS	0xff310076
-/*
- * HID report types --- Ouch! HID spec says 1 2 3!
- */
-
-#define HID_INPUT_REPORT	0
-#define HID_OUTPUT_REPORT	1
-#define HID_FEATURE_REPORT	2
-
-#define HID_REPORT_TYPES	3
 
 /*
  * HID connect requests
@@ -509,7 +500,7 @@ struct hid_report {
 	struct list_head hidinput_list;
 	struct list_head field_entry_list;		/* ordered list of input fields */
 	unsigned int id;				/* id of this report */
-	unsigned int type;				/* report type */
+	enum hid_report_type type;			/* report type */
 	unsigned int application;			/* application usage for this report */
 	struct hid_field *field[HID_MAX_FIELDS];	/* fields of the report */
 	struct hid_field_entry *field_entries;		/* allocated memory of input field_entry */
@@ -658,6 +649,8 @@ struct hid_device {							/* device report descriptor */
 	struct list_head debug_list;
 	spinlock_t  debug_list_lock;
 	wait_queue_head_t debug_wait;
+
+	unsigned int id;						/* system unique id */
 };
 
 #define to_hid_device(pdev) \
@@ -924,20 +917,21 @@ extern int hidinput_connect(struct hid_device *hid, unsigned int force);
 extern void hidinput_disconnect(struct hid_device *);
 
 int hid_set_field(struct hid_field *, unsigned, __s32);
-int hid_input_report(struct hid_device *, int type, u8 *, u32, int);
+int hid_input_report(struct hid_device *hid, enum hid_report_type type, u8 *data, u32 size,
+		     int interrupt);
 struct hid_field *hidinput_get_led_field(struct hid_device *hid);
 unsigned int hidinput_count_leds(struct hid_device *hid);
 __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code);
 void hid_output_report(struct hid_report *report, __u8 *data);
-int __hid_request(struct hid_device *hid, struct hid_report *rep, int reqtype);
+int __hid_request(struct hid_device *hid, struct hid_report *rep, enum hid_class_request reqtype);
 u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags);
 struct hid_device *hid_allocate_device(void);
 struct hid_report *hid_register_report(struct hid_device *device,
-				       unsigned int type, unsigned int id,
+				       enum hid_report_type type, unsigned int id,
 				       unsigned int application);
 int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
 struct hid_report *hid_validate_values(struct hid_device *hid,
-				       unsigned int type, unsigned int id,
+				       enum hid_report_type type, unsigned int id,
 				       unsigned int field_index,
 				       unsigned int report_counts);
 
@@ -1106,10 +1100,11 @@ void hid_hw_stop(struct hid_device *hdev);
 int __must_check hid_hw_open(struct hid_device *hdev);
 void hid_hw_close(struct hid_device *hdev);
 void hid_hw_request(struct hid_device *hdev,
-		    struct hid_report *report, int reqtype);
+		    struct hid_report *report, enum hid_class_request reqtype);
 int hid_hw_raw_request(struct hid_device *hdev,
 		       unsigned char reportnum, __u8 *buf,
-		       size_t len, unsigned char rtype, int reqtype);
+		       size_t len, enum hid_report_type rtype,
+		       enum hid_class_request reqtype);
 int hid_hw_output_report(struct hid_device *hdev, __u8 *buf, size_t len);
 
 /**
@@ -1137,7 +1132,7 @@ static inline int hid_hw_power(struct hid_device *hdev, int level)
  * @reqtype: hid request type
  */
 static inline int hid_hw_idle(struct hid_device *hdev, int report, int idle,
-		int reqtype)
+		enum hid_class_request reqtype)
 {
 	if (hdev->ll_driver->idle)
 		return hdev->ll_driver->idle(hdev, report, idle, reqtype);
@@ -1182,8 +1177,8 @@ static inline u32 hid_report_len(struct hid_report *report)
 	return DIV_ROUND_UP(report->size, 8) + (report->id > 0);
 }
 
-int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
-		int interrupt);
+int hid_report_raw_event(struct hid_device *hid, enum hid_report_type type, u8 *data, u32 size,
+			 int interrupt);
 
 /* HID quirks API */
 unsigned long hid_lookup_quirk(const struct hid_device *hdev);
diff --git a/include/uapi/linux/hid.h b/include/uapi/linux/hid.h
index b34492a..a4dcb34 100644
--- a/include/uapi/linux/hid.h
+++ b/include/uapi/linux/hid.h
@@ -43,15 +43,29 @@
 #define USB_INTERFACE_PROTOCOL_MOUSE	2
 
 /*
+ * HID report types --- Ouch! HID spec says 1 2 3!
+ */
+
+enum hid_report_type {
+	HID_INPUT_REPORT		= 0,
+	HID_OUTPUT_REPORT		= 1,
+	HID_FEATURE_REPORT		= 2,
+
+	HID_REPORT_TYPES,
+};
+
+/*
  * HID class requests
  */
 
-#define HID_REQ_GET_REPORT		0x01
-#define HID_REQ_GET_IDLE		0x02
-#define HID_REQ_GET_PROTOCOL		0x03
-#define HID_REQ_SET_REPORT		0x09
-#define HID_REQ_SET_IDLE		0x0A
-#define HID_REQ_SET_PROTOCOL		0x0B
+enum hid_class_request {
+	HID_REQ_GET_REPORT		= 0x01,
+	HID_REQ_GET_IDLE		= 0x02,
+	HID_REQ_GET_PROTOCOL		= 0x03,
+	HID_REQ_SET_REPORT		= 0x09,
+	HID_REQ_SET_IDLE		= 0x0A,
+	HID_REQ_SET_PROTOCOL		= 0x0B,
+};
 
 /*
  * HID class descriptor types
