diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
new file mode 100644
index 0000000..80e0177
--- /dev/null
+++ b/drivers/net/usb/cdc_eem.c
@@ -0,0 +1,381 @@
+/*
+ * USB CDC EEM network interface driver
+ * Copyright (C) 2009 Oberthur Technologies
+ * by Omar Laazimani, Olivier Condemine
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * This driver is an implementation of the CDC "Ethernet Emulation
+ * Model" (EEM) specification, which encapsulates Ethernet frames
+ * for transport over USB using a simpler USB device model than the
+ * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
+ *
+ * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf
+ *
+ * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
+ * 2.6.27 and 2.6.30rc2 kernel.
+ * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
+ * build on 23-April-2009
+ */
+
+#define EEM_HEAD 2 /* 2 byte header */
+
+/*-------------------------------------------------------------------------*/
+
+static void eem_linkcmd_complete(struct urb *urb)
+{
+ dev_kfree_skb(urb->context);
+ usb_free_urb(urb);
+}
+
+static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
+{
+ struct urb *urb;
+ int status;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb)
+ goto fail;
+
+ usb_fill_bulk_urb(urb, dev->udev, dev->out,
+ skb->data, skb->len, eem_linkcmd_complete, skb);
+
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ usb_free_urb(urb);
+fail:
+ dev_kfree_skb(skb);
+ devwarn(dev, "link cmd failure\n");
+ return;
+ }
+}
+
+static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status = 0;
+
+ status = usbnet_get_endpoints(dev, intf);
+ if (status < 0) {
+ usb_set_intfdata(intf, NULL);
+ usb_driver_release_interface(driver_of(intf), intf);
+ return status;
+ }
+
+ /* no jumbogram (16K) support for now */
+
+ dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN;
+
+ return 0;
+}
+
+/*
+ * EEM permits packing multiple Ethernet frames into USB transfers
+ * (a "bundle"), but for TX we don't try to do that.
+ */
+static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
+{
+ struct sk_buff *skb2 = NULL;
+ u16 len = skb->len;
+ u32 crc = 0;
+ int padlen = 0;
+
+ /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is
+ * zero, stick two bytes of zero length EEM packet on the end.
+ * Else the framework would add invalid single byte padding,
+ * since it can't know whether ZLPs will be handled right by
+ * all the relevant hardware and software.
+ */
+ if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket))
+ padlen += 2;
+
+ if (!skb_cloned(skb)) {
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+
+ if ((tailroom >= ETH_FCS_LEN + padlen)
+ && (headroom >= EEM_HEAD))
+ goto done;
+
+ if ((headroom + tailroom)
+ > (EEM_HEAD + ETH_FCS_LEN + padlen)) {
+ skb->data = memmove(skb->head +
+ EEM_HEAD,
+ skb->data,
+ skb->len);
+ skb_set_tail_pointer(skb, len);
+ goto done;
+ }
+ }
+
+ skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+ if (!skb2)
+ return NULL;
+
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+
+done:
+ /* we don't use the "no Ethernet CRC" option */
+ crc = crc32_le(~0, skb->data, skb->len);
+ crc = ~crc;
+
+ put_unaligned_le32(crc, skb_put(skb, 4));
+
+ /* EEM packet header format:
+ * b0..13: length of ethernet frame
+ * b14: bmCRC (1 == valid Ethernet CRC)
+ * b15: bmType (0 == data)
+ */
+ len = skb->len;
+ put_unaligned_le16(BIT(14) | len, skb_push(skb, 2));
+
+ /* Bundle a zero length EEM packet if needed */
+ if (padlen)
+ put_unaligned_le16(0, skb_put(skb, 2));
+
+ return skb;
+}
+
+static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ /*
+ * Our task here is to strip off framing, leaving skb with one
+ * data frame for the usbnet framework code to process. But we
+ * may have received multiple EEM payloads, or command payloads.
+ * So we must process _everything_ as if it's a header, except
+ * maybe the last data payload
+ *
+ * REVISIT the framework needs updating so that when we consume
+ * all payloads (the last or only message was a command, or a
+ * zero length EEM packet) that is not accounted as an rx_error.
+ */
+ do {
+ struct sk_buff *skb2 = NULL;
+ u16 header;
+ u16 len = 0;
+
+ /* incomplete EEM header? */
+ if (skb->len < EEM_HEAD)
+ return 0;
+
+ /*
+ * EEM packet header format:
+ * b0..14: EEM type dependant (Data or Command)
+ * b15: bmType
+ */
+ header = get_unaligned_le16(skb->data);
+ skb_pull(skb, EEM_HEAD);
+
+ /*
+ * The bmType bit helps to denote when EEM
+ * packet is data or command :
+ * bmType = 0 : EEM data payload
+ * bmType = 1 : EEM (link) command
+ */
+ if (header & BIT(15)) {