Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd

82cb6ace · Linus Torvalds <[email protected]> · 2013-11-14 12:31:43 +09:00

Pull MTD changes from Brian Norris:
 - Unify some compile-time differences so that we have fewer uses of
   #ifdef CONFIG_OF in atmel_nand
 - Other general cleanups (removing unused functions, options,
   variables, fields; use correct interfaces)
 - Fix BUG() for new odd-sized NAND, which report non-power-of-2
   dimensions via ONFI
 - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.)
 - Improve differentiation between SLC and MLC NAND -- this clarifies an
   ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO
   ioctl), where the MTD_MLCNANDFLASH type was present but
   inconsistently used
 - Extend GPMI NAND to support multi-chip-select NAND for some platforms
 - Many improvements to the OMAP2/3 NAND driver, including an expanded
   DT binding to bring us closer to mainline support for some OMAP
   systems
 - Fix a deadlock in the error path of the Atmel NAND driver probe
 - Correct the error codes from MTD mmap() to conform to POSIX and the
   Linux Programmer's Manual.  This is an acknowledged change in the MTD
   ABI, but I can't imagine somebody relying on the non-standard -ENOSYS
   error code specifically.  Am I just being unimaginative? :)
 - Fix a few important GPMI NAND bugs (one regression from 3.12 and one
   long-standing race condition)
 - More? Read the log!

* tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits)
  mtd: gpmi: fix the NULL pointer
  mtd: gpmi: fix kernel BUG due to racing DMA operations
  mtd: mtdchar: return expected errors on mmap() call
  mtd: gpmi: only scan two chips for imx6
  mtd: gpmi: Use devm_kzalloc()
  mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected
  mtd: nand: use a local variable to simplify the nand_scan_tail
  mtd: nand: remove deprecated IRQF_DISABLED
  mtd: dataflash: Say if we find a device we don't support
  mtd: nand: omap: fix error return code in omap_nand_probe()
  mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES
  mtd: m25p80: fixup device removal failure path
  mtd: mxc_nand: Include linux/of.h header
  mtd: remove duplicated include from mtdcore.c
  mtd: m25p80: add support for Macronix mx25l3255e
  mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  ...

Commit: 82cb6acea4d10fa4080612c58deb63993f558e5a
Parents: 0d522ee7 · 885d71e5

Merge commit. Changes below are compared with the first parent: 0d522ee7.

Changes

65 files changed · +925 −984

File	Status	Add	Del	Content
Documentation/ABI/testing/sysfs-class-mtd	modified	+1	−1	View file
Documentation/DocBook/mtdnand.tmpl	modified	+0	−2	View file
Documentation/devicetree/bindings/mtd/gpmc-nand.txt	modified	+10	−6	View file
arch/arm/mach-omap2/board-flash.c	modified	+1	−1	View file
arch/arm/mach-omap2/gpmc.c	modified	+34	−14	View file
arch/powerpc/include/asm/fsl_ifc.h	modified	+2	−0	View file
drivers/mtd/bcm47xxpart.c	modified	+23	−0	View file
drivers/mtd/devices/Kconfig	modified	+0	−7	View file
drivers/mtd/devices/block2mtd.c	modified	+1	−0	View file
drivers/mtd/devices/docg3.c	modified	+1	−1	View file
drivers/mtd/devices/m25p80.c	modified	+33	−49	View file
drivers/mtd/devices/mtd_dataflash.c	modified	+1	−3	View file
drivers/mtd/devices/phram.c	modified	+33	−33	View file
drivers/mtd/devices/sst25l.c	modified	+3	−10	View file
drivers/mtd/inftlcore.c	modified	+1	−1	View file
drivers/mtd/lpddr/lpddr_cmds.c	modified	+1	−1	View file
drivers/mtd/maps/intel_vr_nor.c	modified	+0	−1	View file
drivers/mtd/maps/pci.c	modified	+0	−1	View file
drivers/mtd/maps/plat-ram.c	modified	+2	−16	View file
drivers/mtd/maps/scb2_flash.c	modified	+0	−1	View file
drivers/mtd/mtdblock.c	modified	+2	−1	View file
drivers/mtd/mtdblock_ro.c	modified	+2	−1	View file
drivers/mtd/mtdchar.c	modified	+4	−3	View file
drivers/mtd/mtdcore.c	modified	+3	−0	View file
drivers/mtd/mtdsuper.c	modified	+1	−0	View file
drivers/mtd/nand/Kconfig	modified	+6	−34	View file
drivers/mtd/nand/atmel_nand.c	modified	+14	−53	View file
drivers/mtd/nand/bcm47xxnflash/main.c	modified	+6	−32	View file
drivers/mtd/nand/denali.c	modified	+2	−2	View file
drivers/mtd/nand/denali_pci.c	modified	+0	−1	View file
drivers/mtd/nand/diskonchip.c	modified	+1	−1	View file
drivers/mtd/nand/docg4.c	modified	+6	−10	View file
drivers/mtd/nand/fsl_elbc_nand.c	modified	+0	−2	View file
drivers/mtd/nand/fsl_ifc_nand.c	modified	+102	−32	View file
drivers/mtd/nand/gpmi-nand/gpmi-lib.c	modified	+13	−0	View file
drivers/mtd/nand/gpmi-nand/gpmi-nand.c	modified	+37	−29	View file
drivers/mtd/nand/gpmi-nand/gpmi-regs.h	modified	+3	−0	View file
drivers/mtd/nand/lpc32xx_mlc.c	modified	+1	−1	View file
drivers/mtd/nand/lpc32xx_slc.c	modified	+1	−9	View file
drivers/mtd/nand/mxc_nand.c	modified	+2	−1	View file
drivers/mtd/nand/nand_base.c	modified	+166	−139	View file
drivers/mtd/nand/nand_bbt.c	modified	+3	−35	View file
drivers/mtd/nand/nandsim.c	modified	+1	−1	View file
drivers/mtd/nand/omap2.c	modified	+285	−357	View file
drivers/mtd/nand/pxa3xx_nand.c	modified	+37	−19	View file
drivers/mtd/nand/socrates_nand.c	modified	+3	−11	View file
drivers/mtd/nand/tmio_nand.c	modified	+1	−2	View file
drivers/mtd/nftlcore.c	modified	+1	−1	View file
drivers/mtd/onenand/omap2.c	modified	+0	−22	View file
drivers/mtd/onenand/onenand_base.c	modified	+6	−11	View file
drivers/mtd/ssfdc.c	modified	+1	−1	View file
drivers/mtd/tests/nandbiterrs.c	modified	+1	−1	View file
drivers/mtd/tests/oobtest.c	modified	+1	−1	View file
drivers/mtd/tests/pagetest.c	modified	+1	−1	View file
drivers/mtd/tests/subpagetest.c	modified	+1	−1	View file
drivers/mtd/ubi/build.c	modified	+1	−0	View file
fs/jffs2/fs.c	modified	+4	−0	View file
include/linux/mtd/bbm.h	modified	+0	−2	View file
include/linux/mtd/map.h	modified	+2	−2	View file
include/linux/mtd/mtd.h	modified	+5	−3	View file
include/linux/mtd/nand.h	modified	+12	−4	View file
include/linux/of_mtd.h	modified	+20	−1	View file
include/linux/platform_data/mtd-nand-omap2.h	modified	+11	−7	View file
include/uapi/linux/major.h	modified	+2	−0	View file
include/uapi/mtd/mtd-abi.h	modified	+7	−2	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/ABI/testing/sysfs-class-mtd

View file

diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index bfd119a..1399bb2 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -104,7 +104,7 @@ Description:
 		One of the following ASCII strings, representing the device
 		type:
 
-		absent, ram, rom, nor, nand, dataflash, ubi, unknown
+		absent, ram, rom, nor, nand, mlc-nand, dataflash, ubi, unknown
 
 What:		/sys/class/mtd/mtdX/writesize
 Date:		April 2009

Documentation/DocBook/mtdnand.tmpl

View file

diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index a248f42..cd11926 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -1222,8 +1222,6 @@ in this page</entry>
 #define NAND_BBT_VERSION	0x00000100
 /* Create a bbt if none axists */
 #define NAND_BBT_CREATE		0x00000200
-/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES	0x00000400
 /* Write bbt if neccecary */
 #define NAND_BBT_WRITE		0x00001000
 /* Read and write back block contents when writing bbt */

Documentation/devicetree/bindings/mtd/gpmc-nand.txt

View file

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index df338cb..5e1f31b 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -22,10 +22,10 @@ Optional properties:
 				width of 8 is assumed.
 
  - ti,nand-ecc-opt:		A string setting the ECC layout to use. One of:
-
-		"sw"		Software method (default)
-		"hw"		Hardware method
-		"hw-romcode"	gpmc hamming mode method & romcode layout
+		"sw"		<deprecated> use "ham1" instead
+		"hw"		<deprecated> use "ham1" instead
+		"hw-romcode"	<deprecated> use "ham1" instead
+		"ham1"		1-bit Hamming ecc code
 		"bch4"		4-bit BCH ecc code
 		"bch8"		8-bit BCH ecc code
 
@@ -36,8 +36,12 @@ Optional properties:
 		"prefetch-dma"		Prefetch enabled sDMA mode
 		"prefetch-irq"		Prefetch enabled irq mode
 
- - elm_id:	Specifies elm device node. This is required to support BCH
- 		error correction using ELM module.
+ - elm_id:	<deprecated> use "ti,elm-id" instead
+ - ti,elm-id:	Specifies phandle of the ELM devicetree node.
+		ELM is an on-chip hardware engine on TI SoC which is used for
+		locating ECC errors for BCHx algorithms. SoC devices which have
+		ELM hardware engines should specify this device node in .dtsi
+		Using ELM for ECC error correction frees some CPU cycles.
 
 For inline partiton table parsing (optional):
 

arch/arm/mach-omap2/board-flash.c

View file

diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index fc20a61..ac82512 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
 
-	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
+	board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */

arch/arm/mach-omap2/gpmc.c

View file

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 51525fa..81de562 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1341,14 +1341,6 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
 
 #ifdef CONFIG_MTD_NAND
 
-static const char * const nand_ecc_opts[] = {
-	[OMAP_ECC_HAMMING_CODE_DEFAULT]		= "sw",
-	[OMAP_ECC_HAMMING_CODE_HW]		= "hw",
-	[OMAP_ECC_HAMMING_CODE_HW_ROMCODE]	= "hw-romcode",
-	[OMAP_ECC_BCH4_CODE_HW]			= "bch4",
-	[OMAP_ECC_BCH8_CODE_HW]			= "bch8",
-};
-
 static const char * const nand_xfer_types[] = {
 	[NAND_OMAP_PREFETCH_POLLED]		= "prefetch-polled",
 	[NAND_OMAP_POLLED]			= "polled",
@@ -1378,13 +1370,41 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
 	gpmc_nand_data->cs = val;
 	gpmc_nand_data->of_node = child;
 
-	if (!of_property_read_string(child, "ti,nand-ecc-opt", &s))
-		for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++)
-			if (!strcasecmp(s, nand_ecc_opts[val])) {
-				gpmc_nand_data->ecc_opt = val;
-				break;
-			}
+	/* Detect availability of ELM module */
+	gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+	if (gpmc_nand_data->elm_of_node == NULL)
+		gpmc_nand_data->elm_of_node =
+					of_parse_phandle(child, "elm_id", 0);
+	if (gpmc_nand_data->elm_of_node == NULL)
+		pr_warn("%s: ti,elm-id property not found\n", __func__);
+
+	/* select ecc-scheme for NAND */
+	if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+		pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
+		return -ENODEV;
+	}
+	if (!strcmp(s, "ham1") || !strcmp(s, "sw") ||
+		!strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+		gpmc_nand_data->ecc_opt =
+				OMAP_ECC_HAM1_CODE_HW;
+	else if (!strcmp(s, "bch4"))
+		if (gpmc_nand_data->elm_of_node)
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH4_CODE_HW;
+		else
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+	else if (!strcmp(s, "bch8"))
+		if (gpmc_nand_data->elm_of_node)
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH8_CODE_HW;
+		else
+			gpmc_nand_data->ecc_opt =
+				OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+	else
+		pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
 
+	/* select data transfer mode for NAND controller */
 	if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
 		for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
 			if (!strcasecmp(s, nand_xfer_types[val])) {

arch/powerpc/include/asm/fsl_ifc.h

View file

diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h
index b8a4b9b..f49ddb1 100644
--- a/arch/powerpc/include/asm/fsl_ifc.h
+++ b/arch/powerpc/include/asm/fsl_ifc.h
@@ -93,6 +93,7 @@
 #define CSOR_NAND_PGS_512		0x00000000
 #define CSOR_NAND_PGS_2K		0x00080000
 #define CSOR_NAND_PGS_4K		0x00100000
+#define CSOR_NAND_PGS_8K		0x00180000
 /* Spare region Size */
 #define CSOR_NAND_SPRZ_MASK		0x0000E000
 #define CSOR_NAND_SPRZ_SHIFT		13
@@ -102,6 +103,7 @@
 #define CSOR_NAND_SPRZ_210		0x00006000
 #define CSOR_NAND_SPRZ_218		0x00008000
 #define CSOR_NAND_SPRZ_224		0x0000A000
+#define CSOR_NAND_SPRZ_CSOR_EXT		0x0000C000
 /* Pages Per Block */
 #define CSOR_NAND_PB_MASK		0x00000700
 #define CSOR_NAND_PB_SHIFT		8

drivers/mtd/bcm47xxpart.c

View file

diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index 9279a91..7a6384b 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -27,11 +27,13 @@
 
 /* Magics */
 #define BOARD_DATA_MAGIC		0x5246504D	/* MPFR */
+#define FACTORY_MAGIC			0x59544346	/* FCTY */
 #define POT_MAGIC1			0x54544f50	/* POTT */
 #define POT_MAGIC2			0x504f		/* OP */
 #define ML_MAGIC1			0x39685a42
 #define ML_MAGIC2			0x26594131
 #define TRX_MAGIC			0x30524448
+#define SQSH_MAGIC			0x71736873	/* shsq */
 
 struct trx_header {
 	uint32_t magic;
@@ -71,7 +73,14 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 	/* Alloc */
 	parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
 			GFP_KERNEL);
+	if (!parts)
+		return -ENOMEM;
+
 	buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
+	if (!buf) {
+		kfree(parts);
+		return -ENOMEM;
+	}
 
 	/* Parse block by block looking for magics */
 	for (offset = 0; offset <= master->size - blocksize;
@@ -110,6 +119,13 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 			continue;
 		}
 
+		/* Found on Huawei E970 */
+		if (buf[0x000 / 4] == FACTORY_MAGIC) {
+			bcm47xxpart_add_part(&parts[curr_part++], "factory",
+					     offset, MTD_WRITEABLE);
+			continue;
+		}
+
 		/* POT(TOP) */
 		if (buf[0x000 / 4] == POT_MAGIC1 &&
 		    (buf[0x004 / 4] & 0xFFFF) == POT_MAGIC2) {
@@ -167,6 +183,13 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 			offset = rounddown(offset + trx->length, blocksize);
 			continue;
 		}
+
+		/* Squashfs on devices not using TRX */
+		if (buf[0x000 / 4] == SQSH_MAGIC) {
+			bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
+					     offset, 0);
+			continue;
+		}
 	}
 
 	/* Look for NVRAM at the end of the last block. */

drivers/mtd/devices/Kconfig

View file

diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 74ab4b7..0128138 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -95,13 +95,6 @@ config MTD_M25P80
 	  if you want to specify device partitioning or to use a device which
 	  doesn't support the JEDEC ID instruction.
 
-config M25PXX_USE_FAST_READ
-	bool "Use FAST_READ OPCode allowing SPI CLK >= 50MHz"
-	depends on MTD_M25P80
-	default y
-	help
-	  This option enables FAST_READ access supported by ST M25Pxx.
-
 config MTD_SPEAR_SMI
 	tristate "SPEAR MTD NOR Support through SMI controller"
 	depends on PLAT_SPEAR

drivers/mtd/devices/block2mtd.c

View file

diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 5cb4c04..d9fd87a 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -20,6 +20,7 @@
 #include <linux/mutex.h>
 #include <linux/mount.h>
 #include <linux/slab.h>
+#include <linux/major.h>
 
 /* Info for the block device */
 struct block2mtd_dev {

drivers/mtd/devices/docg3.c

View file

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 3e1b0a0..4f091c1 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -2097,7 +2097,7 @@ notfound:
 	ret = -ENODEV;
 	dev_info(dev, "No supported DiskOnChip found\n");
 err_probe:
-	kfree(cascade->bch);
+	free_bch(cascade->bch);
 	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
 		if (cascade->floors[floor])
 			doc_release_device(cascade->floors[floor]);

drivers/mtd/devices/m25p80.c

View file

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 6bc9618..7eda71d 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -78,7 +78,7 @@
 
 /* Define max times to check status register before we give up. */
 #define	MAX_READY_WAIT_JIFFIES	(40 * HZ)	/* M25P16 specs 40s max chip erase */
-#define	MAX_CMD_SIZE		5
+#define	MAX_CMD_SIZE		6
 
 #define JEDEC_MFR(_jedec_id)	((_jedec_id) >> 16)
 
@@ -367,10 +367,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 	spi_message_init(&m);
 	memset(t, 0, (sizeof t));
 
-	/* NOTE:
-	 * OPCODE_FAST_READ (if available) is faster.
-	 * Should add 1 byte DUMMY_BYTE.
-	 */
 	t[0].tx_buf = flash->command;
 	t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
 	spi_message_add_tail(&t[0], &m);
@@ -388,11 +384,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 		return 1;
 	}
 
-	/* FIXME switch to OPCODE_FAST_READ.  It's required for higher
-	 * clocks; and at this writing, every chip this driver handles
-	 * supports that opcode.
-	 */
-
 	/* Set up the write data buffer. */
 	opcode = flash->read_opcode;
 	flash->command[0] = opcode;
@@ -749,16 +740,19 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
 
 	/* EON -- en25xxx */
-	{ "en25f32", INFO(0x1c3116, 0, 64 * 1024,  64, SECT_4K) },
-	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
-	{ "en25q32b", INFO(0x1c3016, 0, 64 * 1024,  64, 0) },
-	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
-	{ "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
-	{ "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
+	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
+	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64, 0) },
+	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
+	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
+	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
+	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
+
+	/* ESMT */
+	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) },
 
 	/* Everspin */
-	{ "mr25h256", CAT25_INFO(  32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) },
-	{ "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) },
+	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) },
+	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) },
 
 	/* GigaDevice */
 	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64, SECT_4K) },
@@ -775,6 +769,7 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
 	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
 	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, 0) },
+	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
 	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, 0) },
 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
@@ -783,15 +778,16 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, 0) },
 
 	/* Micron */
-	{ "n25q064",  INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
-	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024, 256, 0) },
-	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
-	{ "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) },
+	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, 0) },
+	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, 0) },
+	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, 0) },
+	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K) },
+	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
 
 	/* PMC */
-	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
-	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
-	{ "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024,  64, SECT_4K) },
+	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
+	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4, SECT_4K_PMC) },
+	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64, SECT_4K) },
 
 	/* Spansion -- single (large) sector size only, at least
 	 * for the chips listed here (without boot sectors).
@@ -940,12 +936,7 @@ static int m25p_probe(struct spi_device *spi)
 	struct flash_info		*info;
 	unsigned			i;
 	struct mtd_part_parser_data	ppdata;
-	struct device_node __maybe_unused *np = spi->dev.of_node;
-
-#ifdef CONFIG_MTD_OF_PARTS
-	if (!of_device_is_available(np))
-		return -ENODEV;
-#endif
+	struct device_node *np = spi->dev.of_node;
 
 	/* Platform data helps sort out which chip type we have, as
 	 * well as how this board partitions it.  If we don't have
@@ -992,15 +983,13 @@ static int m25p_probe(struct spi_device *spi)
 		}
 	}
 
-	flash = kzalloc(sizeof *flash, GFP_KERNEL);
+	flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
 	if (!flash)
 		return -ENOMEM;
-	flash->command = kmalloc(MAX_CMD_SIZE + (flash->fast_read ? 1 : 0),
-					GFP_KERNEL);
-	if (!flash->command) {
-		kfree(flash);
+
+	flash->command = devm_kzalloc(&spi->dev, MAX_CMD_SIZE, GFP_KERNEL);
+	if (!flash->command)
 		return -ENOMEM;
-	}
 
 	flash->spi = spi;
 	mutex_init(&flash->lock);
@@ -1062,13 +1051,14 @@ static int m25p_probe(struct spi_device *spi)
 	flash->page_size = info->page_size;
 	flash->mtd.writebufsize = flash->page_size;
 
-	flash->fast_read = false;
-	if (np && of_property_read_bool(np, "m25p,fast-read"))
+	if (np)
+		/* If we were instantiated by DT, use it */
+		flash->fast_read = of_property_read_bool(np, "m25p,fast-read");
+	else
+		/* If we weren't instantiated by DT, default to fast-read */
 		flash->fast_read = true;
 
-#ifdef CONFIG_M25PXX_USE_FAST_READ
-	flash->fast_read = true;
-#endif
+	/* Some devices cannot do fast-read, no matter what DT tells us */
 	if (info->flags & M25P_NO_FR)
 		flash->fast_read = false;
 
@@ -1133,15 +1123,9 @@ static int m25p_probe(struct spi_device *spi)
 static int m25p_remove(struct spi_device *spi)
 {
 	struct m25p	*flash = spi_get_drvdata(spi);
-	int		status;
 
 	/* Clean up MTD stuff. */
-	status = mtd_device_unregister(&flash->mtd);
-	if (status == 0) {
-		kfree(flash->command);
-		kfree(flash);
-	}
-	return 0;
+	return mtd_device_unregister(&flash->mtd);
 }
 
 

drivers/mtd/devices/mtd_dataflash.c

View file

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 0e8cbfe..4a47b02 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -88,8 +88,6 @@ struct dataflash {
 	uint8_t			command[4];
 	char			name[24];
 
-	unsigned		partitioned:1;
-
 	unsigned short		page_offset;	/* offset in flash address */
 	unsigned int		page_size;	/* of bytes per page */
 
@@ -881,7 +879,7 @@ static int dataflash_probe(struct spi_device *spi)
 		break;
 	/* obsolete AT45DB1282 not (yet?) supported */
 	default:
-		pr_debug("%s: unsupported device (%x)\n", dev_name(&spi->dev),
+		dev_info(&spi->dev, "unsupported device (%x)\n",
 				status & 0x3c);
 		status = -ENODEV;
 	}

drivers/mtd/devices/phram.c

View file

diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 67823de..e1f2aeb 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -94,7 +94,7 @@ static void unregister_devices(void)
 	}
 }
 
-static int register_device(char *name, unsigned long start, unsigned long len)
+static int register_device(char *name, phys_addr_t start, size_t len)
 {
 	struct phram_mtd_list *new;
 	int ret = -ENOMEM;
@@ -141,35 +141,35 @@ out0:
 	return ret;
 }
 
-static int ustrtoul(const char *cp, char **endp, unsigned int base)
+static int parse_num64(uint64_t *num64, char *token)
 {
-	unsigned long result = simple_strtoul(cp, endp, base);
-
-	switch (**endp) {
-	case 'G':
-		result *= 1024;
-	case 'M':
-		result *= 1024;
-	case 'k':
-		result *= 1024;
+	size_t len;
+	int shift = 0;
+	int ret;
+
+	len = strlen(token);
 	/* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */
-		if ((*endp)[1] == 'i')
-			(*endp) += 2;
+	if (len > 2) {
+		if (token[len - 1] == 'i') {
+			switch (token[len - 2]) {
+			case 'G':
+				shift += 10;
+			case 'M':
+				shift += 10;
+			case 'k':
+				shift += 10;
+				token[len - 2] = 0;
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
 	}
-	return result;
-}
 
-static int parse_num32(uint32_t *num32, const char *token)
-{
-	char *endp;
-	unsigned long n;
+	ret = kstrtou64(token, 0, num64);
+	*num64 <<= shift;
 
-	n = ustrtoul(token, &endp, 0);
-	if (*endp)
-		return -EINVAL;
-
-	*num32 = n;
-	return 0;
+	return ret;
 }
 
 static int parse_name(char **pname, const char *token)
@@ -209,19 +209,19 @@ static inline void kill_final_newline(char *str)
  * This shall contain the module parameter if any. It is of the form:
  * - phram=<device>,<address>,<size> for module case
  * - phram.phram=<device>,<address>,<size> for built-in case
- * We leave 64 bytes for the device name, 12 for the address and 12 for the
+ * We leave 64 bytes for the device name, 20 for the address and 20 for the
  * size.
  * Example: phram.phram=rootfs,0xa0000000,512Mi
  */
-static __initdata char phram_paramline[64+12+12];
+static __initdata char phram_paramline[64 + 20 + 20];
 
 static int __init phram_setup(const char *val)
 {
-	char buf[64+12+12], *str = buf;
+	char buf[64 + 20 + 20], *str = buf;
 	char *token[3];
 	char *name;
-	uint32_t start;
-	uint32_t len;
+	uint64_t start;
+	uint64_t len;
 	int i, ret;
 
 	if (strnlen(val, sizeof(buf)) >= sizeof(buf))
@@ -243,13 +243,13 @@ static int __init phram_setup(const char *val)
 	if (ret)
 		return ret;
 
-	ret = parse_num32(&start, token[1]);
+	ret = parse_num64(&start, token[1]);
 	if (ret) {
 		kfree(name);
 		parse_err("illegal start address\n");
 	}
 
-	ret = parse_num32(&len, token[2]);
+	ret = parse_num64(&len, token[2]);
 	if (ret) {
 		kfree(name);
 		parse_err("illegal device length\n");
@@ -257,7 +257,7 @@ static int __init phram_setup(const char *val)
 
 	ret = register_device(name, start, len);
 	if (!ret)
-		pr_info("%s device: %#x at %#x\n", name, len, start);
+		pr_info("%s device: %#llx at %#llx\n", name, len, start);
 	else
 		kfree(name);
 

drivers/mtd/devices/sst25l.c

View file

diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index a42f1f0..687bf27 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -364,7 +364,7 @@ static int sst25l_probe(struct spi_device *spi)
 	if (!flash_info)
 		return -ENODEV;
 
-	flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
+	flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
 	if (!flash)
 		return -ENOMEM;
 
@@ -402,11 +402,8 @@ static int sst25l_probe(struct spi_device *spi)
 	ret = mtd_device_parse_register(&flash->mtd, NULL, NULL,
 					data ? data->parts : NULL,
 					data ? data->nr_parts : 0);
-	if (ret) {
-		kfree(flash);
-		spi_set_drvdata(spi, NULL);
+	if (ret)
 		return -ENODEV;
-	}
 