Merge tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86
Merge commit. Changes below are compared with the first parent: 2edd73a4.
Changes
27 files changed · +1738 −419
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/ABI/stable/sysfs-driver-mlxreg-io
View filediff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
new file mode 100644
index 0000000..d9d117d
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -0,0 +1,78 @@
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
+ asic_health
+
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file shows ASIC health status. The possible values are:
+ 0 - health failed, 2 - health OK, 3 - ASIC in booting state.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
+ cpld1_version
+ cpld2_version
+
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: These files show with which CPLD versions have been burned
+ on carrier and switch boards.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file allows iio devices selection.
+
+ Attribute select_iio can be written with 0 or with 1. It
+ selects which one of iio devices can be accessed.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
+ /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on
+ /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle
+ /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: These files allow asserting system power cycling, switching
+ power supply units on and off and system's main power domain
+ shutdown.
+ Expected behavior:
+ When pwr_cycle is written 1: auxiliary power domain will go
+ down and after short period (about 1 second) up.
+ When psu1_on or psu2_on is written 1, related unit will be
+ disconnected from the power source, when written 0 - connected.
+ If both are written 1 - power supplies main power domain will
+ go down.
+ When pwr_down is written 1, system's main power domain will go
+ down.
+
+ The files are write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
+ reset_aux_pwr_or_ref
+ reset_asic_thermal
+ reset_hotswap_or_halt
+ reset_hotswap_or_wd
+ reset_fw_reset
+ reset_long_pb
+ reset_main_pwr_fail
+ reset_short_pb
+ reset_sw_reset
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: These files show the system reset cause, as following: power
+ auxiliary outage or power refresh, ASIC thermal shutdown, halt,
+ hotswap, watchdog, firmware reset, long press power button,
+ short press power button, software reset. Value 1 in file means
+ this is reset cause, 0 - otherwise. Only one of the above
+ causes could be 1 at the same time, representing only last
+ reset cause.
+
+ The files are read only.
MAINTAINERS
View filediff --git a/MAINTAINERS b/MAINTAINERS
index 24b200d..efb08d7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13207,7 +13207,7 @@ L: [email protected]
S: Maintained
F: drivers/input/touchscreen/silead.c
-F: drivers/platform/x86/silead_dmi.c
+F: drivers/platform/x86/touchscreen_dmi.c
SILICON MOTION SM712 FRAME BUFFER DRIVER
M: Sudip Mukherjee <[email protected]>
drivers/platform/mellanox/Kconfig
View filediff --git a/drivers/platform/mellanox/Kconfig b/drivers/platform/mellanox/Kconfig
index 591bccd..cd8a908 100644
--- a/drivers/platform/mellanox/Kconfig
+++ b/drivers/platform/mellanox/Kconfig
@@ -23,4 +23,15 @@ config MLXREG_HOTPLUG
This driver handles hot-plug events for the power suppliers, power
cables and fans on the wide range Mellanox IB and Ethernet systems.
+config MLXREG_IO
+ tristate "Mellanox platform register access driver support"
+ depends on REGMAP
+ depends on HWMON
+ help
+ This driver allows access to Mellanox programmable device register
+ space through sysfs interface. The sets of registers for sysfs access
+ are defined per system type bases and include the registers related
+ to system resets operation, system reset causes monitoring and some
+ kinds of mux selection.
+
endif # MELLANOX_PLATFORM
drivers/platform/mellanox/Makefile
View filediff --git a/drivers/platform/mellanox/Makefile b/drivers/platform/mellanox/Makefile
index 7c8385e..57074d9 100644
--- a/drivers/platform/mellanox/Makefile
+++ b/drivers/platform/mellanox/Makefile
@@ -4,3 +4,4 @@
# Mellanox Platform-Specific Drivers
#
obj-$(CONFIG_MLXREG_HOTPLUG) += mlxreg-hotplug.o
+obj-$(CONFIG_MLXREG_IO) += mlxreg-io.o
drivers/platform/mellanox/mlxreg-hotplug.c
View filediff --git a/drivers/platform/mellanox/mlxreg-hotplug.c b/drivers/platform/mellanox/mlxreg-hotplug.c
index ac97aa0..b6d4455 100644
--- a/drivers/platform/mellanox/mlxreg-hotplug.c
+++ b/drivers/platform/mellanox/mlxreg-hotplug.c
@@ -50,9 +50,8 @@
#define MLXREG_HOTPLUG_MASK_OFF 2
#define MLXREG_HOTPLUG_AGGR_MASK_OFF 1
-/* ASIC health parameters. */
-#define MLXREG_HOTPLUG_HEALTH_MASK 0x02
-#define MLXREG_HOTPLUG_RST_CNTR 3
+/* ASIC good health mask. */
+#define MLXREG_HOTPLUG_GOOD_HEALTH_MASK 0x02
#define MLXREG_HOTPLUG_ATTRS_MAX 24
#define MLXREG_HOTPLUG_NOT_ASSERT 3
@@ -103,6 +102,9 @@ static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv,
{
struct mlxreg_core_hotplug_platform_data *pdata;
+ /* Notify user by sending hwmon uevent. */
+ kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE);
+
/*
* Return if adapter number is negative. It could be in case hotplug
* event is not associated with hotplug device.
@@ -134,8 +136,13 @@ static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv,
return 0;
}
-static void mlxreg_hotplug_device_destroy(struct mlxreg_core_data *data)
+static void
+mlxreg_hotplug_device_destroy(struct mlxreg_hotplug_priv_data *priv,
+ struct mlxreg_core_data *data)
{
+ /* Notify user by sending hwmon uevent. */
+ kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE);
+
if (data->hpdev.client) {
i2c_unregister_device(data->hpdev.client);
data->hpdev.client = NULL;
@@ -278,14 +285,14 @@ mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv,
data = item->data + bit;
if (regval & BIT(bit)) {
if (item->inversed)
- mlxreg_hotplug_device_destroy(data);
+ mlxreg_hotplug_device_destroy(priv, data);
else
mlxreg_hotplug_device_create(priv, data);
} else {
if (item->inversed)
mlxreg_hotplug_device_create(priv, data);
else
- mlxreg_hotplug_device_destroy(data);
+ mlxreg_hotplug_device_destroy(priv, data);
}
}
@@ -325,21 +332,40 @@ mlxreg_hotplug_health_work_helper(struct mlxreg_hotplug_priv_data *priv,
goto out;
regval &= data->mask;
- item->cache = regval;
- if (regval == MLXREG_HOTPLUG_HEALTH_MASK) {
- if ((data->health_cntr++ == MLXREG_HOTPLUG_RST_CNTR) ||
- !priv->after_probe) {
+
+ if (item->cache == regval)
+ goto ack_event;
+
+ /*
+ * ASIC health indication is provided through two bits. Bits
+ * value 0x2 indicates that ASIC reached the good health, value
+ * 0x0 indicates ASIC the bad health or dormant state and value
+ * 0x3 indicates the booting state. During ASIC reset it should
+ * pass the following states: dormant -> booting -> good.
+ */
+ if (regval == MLXREG_HOTPLUG_GOOD_HEALTH_MASK) {
+ if (!data->attached) {
+ /*
+ * ASIC is in steady state. Connect associated
+ * device, if configured.
+ */
mlxreg_hotplug_device_create(priv, data);
data->attached = true;
}
} else {
if (data->attached) {
- mlxreg_hotplug_device_destroy(data);
+ /*
+ * ASIC health is failed after ASIC has been
+ * in steady state. Disconnect associated
+ * device, if it has been connected.
+ */
+ mlxreg_hotplug_device_destroy(priv, data);
data->attached = false;
data->health_cntr = 0;
}
}
-
+ item->cache = regval;
+ack_event:
/* Acknowledge event. */
ret = regmap_write(priv->regmap, data->reg +
MLXREG_HOTPLUG_EVENT_OFF, 0);
@@ -551,7 +577,7 @@ static void mlxreg_hotplug_unset_irq(struct mlxreg_hotplug_priv_data *priv)
/* Remove all the attached devices in group. */
count = item->count;
for (j = 0; j < count; j++, data++)
- mlxreg_hotplug_device_destroy(data);
+ mlxreg_hotplug_device_destroy(priv, data);
}
}
@@ -616,10 +642,6 @@ static int mlxreg_hotplug_probe(struct platform_device *pdev)
disable_irq(priv->irq);
spin_lock_init(&priv->lock);
INIT_DELAYED_WORK(&priv->dwork_irq, mlxreg_hotplug_work_handler);
- /* Perform initial interrupts setup. */
- mlxreg_hotplug_set_irq(priv);
-
- priv->after_probe = true;
dev_set_drvdata(&pdev->dev, priv);
err = mlxreg_hotplug_attr_init(priv);
@@ -637,6 +659,10 @@ static int mlxreg_hotplug_probe(struct platform_device *pdev)
return PTR_ERR(priv->hwmon);
}
+ /* Perform initial interrupts setup. */
+ mlxreg_hotplug_set_irq(priv);
+ priv->after_probe = true;
+
return 0;
}
drivers/platform/mellanox/mlxreg-io.c
View filediff --git a/drivers/platform/mellanox/mlxreg-io.c b/drivers/platform/mellanox/mlxreg-io.c
new file mode 100644
index 0000000..acfaf64
--- /dev/null
+++ b/drivers/platform/mellanox/mlxreg-io.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Mellanox register access driver
+ *
+ * Copyright (C) 2018 Mellanox Technologies
+ * Copyright (C) 2018 Vadim Pasternak <[email protected]>
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_data/mlxreg.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* Attribute parameters. */
+#define MLXREG_IO_ATT_SIZE 10
+#define MLXREG_IO_ATT_NUM 48
+
+/**
+ * struct mlxreg_io_priv_data - driver's private data:
+ *
+ * @pdev: platform device;
+ * @pdata: platform data;
+ * @hwmon: hwmon device;
+ * @mlxreg_io_attr: sysfs attributes array;
+ * @mlxreg_io_dev_attr: sysfs sensor device attribute array;
+ * @group: sysfs attribute group;
+ * @groups: list of sysfs attribute group for hwmon registration;
+ */
+struct mlxreg_io_priv_data {
+ struct platform_device *pdev;
+ struct mlxreg_core_platform_data *pdata;
+ struct device *hwmon;
+ struct attribute *mlxreg_io_attr[MLXREG_IO_ATT_NUM + 1];
+ struct sensor_device_attribute mlxreg_io_dev_attr[MLXREG_IO_ATT_NUM];
+ struct attribute_group group;
+ const struct attribute_group *groups[2];
+};
+
+static int
+mlxreg_io_get_reg(void *regmap, struct mlxreg_core_data *data, u32 in_val,
+ bool rw_flag, u32 *regval)
+{
+ int ret;
+
+ ret = regmap_read(regmap, data->reg, regval);
+ if (ret)
+ goto access_error;
+
+ /*
+ * There are three kinds of attributes: single bit, full register's
+ * bits and bit sequence. For the first kind field mask indicates which
+ * bits are not related and field bit is set zero. For the second kind
+ * field mask is set to zero and field bit is set with all bits one.
+ * No special handling for such kind of attributes - pass value as is.
+ * For the third kind, field mask indicates which bits are related and
+ * field bit is set to the first bit number (from 1 to 32) is the bit
+ * sequence.
+ */
+ if (!data->bit) {
+ /* Single bit. */
+ if (rw_flag) {
+ /* For show: expose effective bit value as 0 or 1. */
+ *regval = !!(*regval & ~data->mask);
+ } else {
+ /* For store: set effective bit value. */
+ *regval &= data->mask;
+ if (in_val)
+ *regval |= ~data->mask;
+ }
+ } else if (data->mask) {
+ /* Bit sequence. */
+ if (rw_flag) {
+ /* For show: mask and shift right. */
+ *regval = ror32(*regval & data->mask, (data->bit - 1));
+ } else {
+ /* For store: shift to the position and mask. */
+ in_val = rol32(in_val, data->bit - 1) & data->mask;
+ /* Clear relevant bits and set them to new value. */
+ *regval = (*regval & ~data->mask) | in_val;
+ }
+ }
+
+access_error:
+ return ret;
+}
+
+static ssize_t
+mlxreg_io_attr_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct mlxreg_io_priv_data *priv = dev_get_drvdata(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct mlxreg_core_data *data = priv->pdata->data + index;
+ u32 regval = 0;
+ int ret;
+
+ ret = mlxreg_io_get_reg(priv->pdata->regmap, data, 0, true, ®val);
+ if (ret)
+ goto access_error;
+
+ return sprintf(buf, "%u\n", regval);
+
+access_error:
+ return ret;
+}
+
+static ssize_t
+mlxreg_io_attr_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct mlxreg_io_priv_data *priv = dev_get_drvdata(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct mlxreg_core_data *data = priv->pdata->data + index;
+ u32 input_val, regval;
+ int ret;
+
+ if (len > MLXREG_IO_ATT_SIZE)
+ return -EINVAL;
+
+ /* Convert buffer to input value. */
+ ret = kstrtou32(buf, len, &input_val);
+ if (ret)
+ return ret;
+
+ ret = mlxreg_io_get_reg(priv->pdata->regmap, data, input_val, false,
+ ®val);
+ if (ret)
+ goto access_error;
+
+ ret = regmap_write(priv->pdata->regmap, data->reg, regval);
+ if (ret)
+ goto access_error;
+
+ return len;
+
+access_error:
+ dev_err(&priv->pdev->dev, "Bus access error\n");
+ return ret;
+}
+
+static struct device_attribute mlxreg_io_devattr_rw = {
+ .show = mlxreg_io_attr_show,
+ .store = mlxreg_io_attr_store,
+};
+
+static int mlxreg_io_attr_init(struct mlxreg_io_priv_data *priv)
+{
+ int i;
+
+ priv->group.attrs = devm_kcalloc(&priv->pdev->dev,
+ priv->pdata->counter,
+ sizeof(struct attribute *),
+ GFP_KERNEL);
+ if (!priv->group.attrs)
+ return -ENOMEM;
+
+ for (i = 0; i < priv->pdata->counter; i++) {
+ priv->mlxreg_io_attr[i] =
+ &priv->mlxreg_io_dev_attr[i].dev_attr.attr;
+ memcpy(&priv->mlxreg_io_dev_attr[i].dev_attr,
+ &mlxreg_io_devattr_rw, sizeof(struct device_attribute));
+
+ /* Set attribute name as a label. */
+ priv->mlxreg_io_attr[i]->name =
+ devm_kasprintf(&priv->pdev->dev, GFP_KERNEL,
+ priv->pdata->data[i].label);
+
+ if (!priv->mlxreg_io_attr[i]->name) {
+ dev_err(&priv->pdev->dev, "Memory allocation failed for sysfs attribute %d.\n",
+ i + 1);
+ return -ENOMEM;
+ }
+
+ priv->mlxreg_io_dev_attr[i].dev_attr.attr.mode =
+ priv->pdata->data[i].mode;
+ priv->mlxreg_io_dev_attr[i].dev_attr.attr.name =
+ priv->mlxreg_io_attr[i]->name;
+ priv->mlxreg_io_dev_attr[i].index = i;
+ sysfs_attr_init(&priv->mlxreg_io_dev_attr[i].dev_attr.attr);
+ }
+
+ priv->group.attrs = priv->mlxreg_io_attr;
+ priv->groups[0] = &priv->group;
+ priv->groups[1] = NULL;
+
+ return 0;
+}
+
+static int mlxreg_io_probe(struct platform_device *pdev)
+{
+ struct mlxreg_io_priv_data *priv;
+ int err;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->pdata = dev_get_platdata(&pdev->dev);
+ if (!priv->pdata) {
+ dev_err(&pdev->dev, "Failed to get platform data.\n");
+ return -EINVAL;
+ }
+
+ priv->pdev = pdev;
+
+ err = mlxreg_io_attr_init(priv);
+ if (err) {
+ dev_err(&priv->pdev->dev, "Failed to allocate attributes: %d\n",
+ err);
+ return err;
+ }
+
+ priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev,
+ "mlxreg_io",
+ priv,
+ priv->groups);
+ if (IS_ERR(priv->hwmon)) {
+ dev_err(&pdev->dev, "Failed to register hwmon device %ld\n",
+ PTR_ERR(priv->hwmon));
+ return PTR_ERR(priv->hwmon);
+ }
+
+ dev_set_drvdata(&pdev->dev, priv);
+
+ return 0;
+}
+
+static struct platform_driver mlxreg_io_driver = {
+ .driver = {
+ .name = "mlxreg-io",
+ },
+ .probe = mlxreg_io_probe,
+};
+
+module_platform_driver(mlxreg_io_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <[email protected]>");
+MODULE_DESCRIPTION("Mellanox regmap I/O access driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mlxreg-io");
drivers/platform/x86/Kconfig
View filediff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 107d336..0c1aa6c 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1196,16 +1196,16 @@ config INTEL_TURBO_MAX_3
This driver is only required when the system is not using Hardware
P-States (HWP). In HWP mode, priority can be read from ACPI tables.
-config SILEAD_DMI
- bool "Tablets with Silead touchscreens"
+config TOUCHSCREEN_DMI
+ bool "DMI based touchscreen configuration info"
depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD
---help---
- Certain ACPI based tablets with Silead touchscreens do not have
- enough data in ACPI tables for the touchscreen driver to handle
- the touchscreen properly, as OEMs expected the data to be baked
- into the tablet model specific version of the driver shipped
- with the OS-image for the device. This option supplies the missing
- information. Enable this for x86 tablets with Silead touchscreens.
+ Certain ACPI based tablets with e.g. Silead or Chipone touchscreens
+ do not have enough data in ACPI tables for the touchscreen driver to
+ handle the touchscreen properly, as OEMs expect the data to be baked
+ into the tablet model specific version of the driver shipped with the
+ the OS-image for the device. This option supplies the missing info.
+ Enable this for x86 tablets with Silead or Chipone touchscreens.
config INTEL_CHTDC_TI_PWRBTN
tristate "Intel Cherry Trail Dollar Cove TI power button driver"
drivers/platform/x86/Makefile
View filediff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 50dc8f2..e6d1bec 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -78,7 +78,7 @@ obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o
obj-$(CONFIG_PVPANIC) += pvpanic.o
obj-$(CONFIG_ALIENWARE_WMI) += alienware-wmi.o
obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o
-obj-$(CONFIG_SILEAD_DMI) += silead_dmi.o
+obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o
obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o
obj-$(CONFIG_SURFACE_3_BUTTON) += surface3_button.o
obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o
drivers/platform/x86/acer-wmi.c
View filediff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 8952173..fcfeadd 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -672,10 +672,7 @@ static void __init find_quirks(void)
static bool has_cap(u32 cap)
{
- if ((interface->capability & cap) != 0)
- return 1;
-
- return 0;
+ return interface->capability & cap;
}
/*
@@ -2216,7 +2213,7 @@ static int __init acer_wmi_init(void)
if (wmi_has_guid(AMW0_GUID1) &&
!dmi_check_system(amw0_whitelist) &&
quirks == &quirk_unknown) {
- pr_err("Unsupported machine has AMW0_GUID1, unable to load\n");
+ pr_debug("Unsupported machine has AMW0_GUID1, unable to load\n");
return -ENODEV;
}
drivers/platform/x86/asus-nb-wmi.c
View filediff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index 136ff2b..db2af09 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -496,6 +496,7 @@ static const struct key_entry asus_nb_wmi_keymap[] = {
{ KE_KEY, 0xC4, { KEY_KBDILLUMUP } },
{ KE_KEY, 0xC5, { KEY_KBDILLUMDOWN } },
{ KE_IGNORE, 0xC6, }, /* Ambient Light Sensor notification */
+ { KE_KEY, 0xFA, { KEY_PROG2 } }, /* Lid flip action */
{ KE_END, 0},
};
drivers/platform/x86/asus-wireless.c
View filediff --git a/drivers/platform/x86/asus-wireless.c b/drivers/platform/x86/asus-wireless.c
index 6afd011..7458f76 100644
--- a/drivers/platform/x86/asus-wireless.c
+++ b/drivers/platform/x86/asus-wireless.c
@@ -52,13 +52,12 @@ static const struct acpi_device_id device_ids[] = {
};
MODULE_DEVICE_TABLE(acpi, device_ids);
This diff is incomplete. Download the complete patch.
drivers/platform/x86/asus-wmi.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/dell-smbios-base.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/dell-smbios-smm.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/dell-smbios-wmi.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/ideapad-laptop.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/intel-hid.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/intel-vbtn.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/intel_ips.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/intel_pmc_core.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/intel_pmc_core.h
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/intel_punit_ipc.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/mlx-platform.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/thinkpad_acpi.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/toshiba_acpi.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/touchscreen_dmi.c
View fileThis diff is incomplete. Download the complete patch.
drivers/platform/x86/wmi.c
View fileThis diff is incomplete. Download the complete patch.