diff --git a/Documentation/acpi/dsd/leds.txt b/Documentation/acpi/dsd/leds.txt new file mode 100644 index 0000000..81a63af --- /dev/null +++ b/Documentation/acpi/dsd/leds.txt @@ -0,0 +1,99 @@ +Describing and referring to LEDs in ACPI + +Individual LEDs are described by hierarchical data extension [6] nodes under the +device node, the LED driver chip. The "reg" property in the LED specific nodes +tells the numerical ID of each individual LED output to which the LEDs are +connected. [3] The hierarchical data nodes are named "led@X", where X is the +number of the LED output. + +Referring to LEDs in Device tree is documented in [4], in "flash-leds" property +documentation. In short, LEDs are directly referred to by using phandles. + +While Device tree allows referring to any node in the tree[1], in ACPI +references are limited to device nodes only [2]. For this reason using the same +mechanism on ACPI is not possible. A mechanism to refer to non-device ACPI nodes +is documented in [7]. + +ACPI allows (as does DT) using integer arguments after the reference. A +combination of the LED driver device reference and an integer argument, +referring to the "reg" property of the relevant LED, is used to identify +individual LEDs. The value of the "reg" property is a contract between the +firmware and software, it uniquely identifies the LED driver outputs. + +Under the LED driver device, The first hierarchical data extension package list +entry shall contain the string "led@" followed by the number of the LED, +followed by the referred object name. That object shall be named "LED" followed +by the number of the LED. + +An ASL example of a camera sensor device and a LED driver device for two LEDs. +Objects not relevant for LEDs or the references to them have been omitted. + + Device (LED) + { + Name (_DSD, Package () { + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "led@0", LED0 }, + Package () { "led@1", LED1 }, + } + }) + Name (LED0, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 0 }, + Package () { "flash-max-microamp", 1000000 }, + Package () { "flash-timeout-us", 200000 }, + Package () { "led-max-microamp", 100000 }, + Package () { "label", "white:flash" }, + } + }) + Name (LED1, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 1 }, + Package () { "led-max-microamp", 10000 }, + Package () { "label", "red:indicator" }, + } + }) + } + + Device (SEN) + { + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { + "flash-leds", + Package () { ^LED, "led@0", ^LED, "led@1" }, + } + } + }) + } + +where + + LED LED driver device + LED0 First LED + LED1 Second LED + SEN Camera sensor device (or another device the LED is + related to) + +[1] Device tree. , referenced 2019-02-21. + +[2] Advanced Configuration and Power Interface Specification. + , + referenced 2019-02-21. + +[3] Documentation/devicetree/bindings/leds/common.txt + +[4] Documentation/devicetree/bindings/media/video-interfaces.txt + +[5] Device Properties UUID For _DSD. + , + referenced 2019-02-21. + +[6] Hierarchical Data Extension UUID For _DSD. + , + referenced 2019-02-21. + +[7] Documentation/acpi/dsd/data-node-reference.txt diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt new file mode 100644 index 0000000..c087f85 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt @@ -0,0 +1,101 @@ +* Texas Instruments - lm3532 White LED driver with ambient light sensing +capability. + +The LM3532 provides the 3 high-voltage, low-side current sinks. The device is +programmable over an I2C-compatible interface and has independent +current control for all three channels. The adaptive current regulation +method allows for different LED currents in each current sink thus allowing +for a wide variety of backlight and keypad applications. + +The main features of the LM3532 include dual ambient light sensor inputs +each with 32 internal voltage setting resistors, 8-bit logarithmic and linear +brightness control, dual external PWM brightness control inputs, and up to +1000:1 dimming ratio with programmable fade in and fade out settings. + +Required properties: + - compatible : "ti,lm3532" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : gpio pin to enable (active high)/disable the device. + - ramp-up-us - The Run time ramp rates/step are from one current + set-point to another after the device has reached its + initial target set point from turn-on + - ramp-down-us - The Run time ramp rates/step are from one current + set-point to another after the device has reached its + initial target set point from turn-on + Range for ramp settings: 8us - 65536us + +Optional properties if ALS mode is used: + - ti,als-vmin - Minimum ALS voltage defined in Volts + - ti,als-vmax - Maximum ALS voltage defined in Volts + Per the data sheet the max ALS voltage is 2V and the min is 0V + + - ti,als1-imp-sel - ALS1 impedance resistor selection in Ohms + - ti,als2-imp-sel - ALS2 impedance resistor selection in Ohms + Range for impedance select: 37000 Ohms - 1190 Ohms + Values above 37kohms will be set to the "High Impedance" setting + + - ti,als-avrg-time-us - Determines the length of time the device needs to + average the two ALS inputs. This is only used if + the input mode is LM3532_ALS_INPUT_AVRG. + Range: 17920us - 2293760us + - ti,als-input-mode - Determines how the device uses the attached ALS + devices. + 0x00 - ALS1 and ALS2 input average + 0x01 - ALS1 Input + 0x02 - ALS2 Input + 0x03 - Max of ALS1 and ALS2 + +Required child properties: + - reg : Indicates control bank the LED string is controlled by + - led-sources : see Documentation/devicetree/bindings/leds/common.txt + - ti,led-mode : Defines if the LED strings are manually controlled or + if the LED strings are controlled by the ALS. + 0x00 - LED strings are I2C controlled via full scale + brightness control register + 0x01 - LED strings are ALS controlled + +Optional LED child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: +led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + ramp-up-us = <1024>; + ramp-down-us = <65536>; + + ti,als-vmin = <0>; + ti,als-vmax = <2000>; + ti,als1-imp-sel = <4110>; + ti,als2-imp-sel = <2180>; + ti,als-avrg-time-us = <17920>; + ti,als-input-mode = <0x00>; + + led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <1>; + label = ":backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; + }; +}; + +For more product information please see the links below: +http://www.ti.com/product/LM3532 diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt index c885cf8..980394d 100644 --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -4,7 +4,6 @@ TI LMU driver supports lighting devices below. Name Child nodes ------ --------------------------------- - LM3532 Backlight LM3631 Backlight and regulator LM3632 Backlight and regulator LM3633 Backlight, LED and fault monitor @@ -13,7 +12,6 @@ TI LMU driver supports lighting devices below. Required properties: - compatible: Should be one of: - "ti,lm3532" "ti,lm3631" "ti,lm3632" "ti,lm3633" @@ -23,7 +21,6 @@ Required properties: 0x11 for LM3632 0x29 for LM3631 0x36 for LM3633, LM3697 - 0x38 for LM3532 0x63 for LM3695 Optional property: @@ -47,23 +44,6 @@ Optional nodes: [2] ../leds/leds-lm3633.txt [3] ../regulator/lm363x-regulator.txt -lm3532@38 { - compatible = "ti,lm3532"; - reg = <0x38>; - - enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; - - backlight { - compatible = "ti,lm3532-backlight"; - - lcd { - led-sources = <0 1 2>; - ramp-up-msec = <30>; - ramp-down-msec = <0>; - }; - }; -}; - lm3631@29 { compatible = "ti,lm3631"; reg = <0x29>; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index e21ec92..714863f 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -214,7 +214,6 @@ width-mm = <50>; height-mm = <89>; - backlight = <&lcd_backlight>; panel-timing { clock-frequency = <0>; /* Calculated by dsi */ @@ -383,20 +382,30 @@ }; &i2c1 { - lm3532@38 { + led-controller@38 { compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x38>; enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - lcd_backlight: backlight { - compatible = "ti,lm3532-backlight"; + ramp-up-us = <1024>; + ramp-down-us = <8193>; - lcd { - led-sources = <0 1 2>; - ramp-up-msec = <1>; - ramp-down-msec = <0>; - }; + led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; }; }; }; diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index a72f97f..f3000cc 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -23,8 +23,8 @@ config LEDS_CLASS_FLASH tristate "LED Flash Class Support" depends on LEDS_CLASS help - This option enables the flash led sysfs class in /sys/class/leds. - It wrapps LED Class and adds flash LEDs specific sysfs attributes + This option enables the flash LED sysfs class in /sys/class/leds. + It wraps LED Class and adds flash LEDs specific sysfs attributes and kernel internal API to it. You'll need this to provide support for the flash related features of a LED device. It can be built as a module. @@ -56,7 +56,7 @@ config LEDS_AAT1290 depends on OF depends on PINCTRL help - This option enables support for the LEDs on the AAT1290. + This option enables support for the LEDs on the AAT1290. config LEDS_AN30259A tristate "LED support for Panasonic AN30259A" @@ -138,6 +138,16 @@ config LEDS_LM3530 controlled manually or using PWM input or using ambient light automatically. +config LEDS_LM3532 + tristate "LCD Backlight driver for LM3532" + depends on LEDS_CLASS + depends on I2C + help + This option enables support for the LCD backlight using + LM3532 ambient light sensor chip. This ALS chip can be + controlled manually or using PWM input or using ambient + light automatically. + config LEDS_LM3533 tristate "LED support for LM3533" depends on LEDS_CLASS @@ -413,13 +423,13 @@ config LEDS_CLEVO_MAIL This module can drive the mail LED for the following notebooks: - Clevo D400P - Clevo D410J - Clevo D410V - Clevo D400V/D470V (not tested, but might work) - Clevo M540N - Clevo M5x0N (not tested, but might work) - Positivo Mobile (Clevo M5x0V) + Clevo D400P + Clevo D410J + Clevo D410V + Clevo D400V/D470V (not tested, but might work) + Clevo M540N + Clevo M5x0N (not tested, but might work) + Positivo Mobile (Clevo M5x0V) If your model is not listed here you can try the "nodetect" module parameter. @@ -462,7 +472,7 @@ config LEDS_WM831X_STATUS depends on MFD_WM831X help This option enables support for the status LEDs of the WM831x - series of PMICs. + series of PMICs. config LEDS_WM8350 tristate "LED Support for WM8350 AudioPlus PMIC" @@ -533,6 +543,7 @@ config LEDS_LT3593 tristate "LED driver for LT3593 controllers" depends on LEDS_CLASS depends on GPIOLIB || COMPILE_TEST + depends on OF help This option enables support for LEDs driven by a Linear Technology LT3593 controller. This controller uses a special one-wire pulse diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 4c1b005..7a8b1f5 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o obj-$(CONFIG_LEDS_CPCAP) += leds-cpcap.o obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o +obj-$(CONFIG_LEDS_LM3532) += leds-lm3532.o obj-$(CONFIG_LEDS_LM3533) += leds-lm3533.o obj-$(CONFIG_LEDS_LM3642) += leds-lm3642.o obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 3c7e348..85848c5 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -57,6 +57,7 @@ static ssize_t brightness_store(struct device *dev, if (state == LED_OFF) led_trigger_remove(led_cdev); led_set_brightness(led_cdev, state); + flush_work(&led_cdev->set_brightness_work); ret = size; unlock: diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c index e3da7c0..e9ae7f8 100644 --- a/drivers/leds/led-core.c +++ b/drivers/leds/led-core.c @@ -164,6 +164,11 @@ static void led_blink_setup(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off) { + /* + * If "set brightness to 0" is pending in workqueue, we don't + * want that to be reordered after blink_set() + */ + flush_work(&led_cdev->set_brightness_work); if (!test_bit(LED_BLINK_ONESHOT, &led_cdev->work_flags) && led_cdev->blink_set && !led_cdev->blink_set(led_cdev, delay_on, delay_off)) diff --git a/drivers/leds/leds-as3645a.c b/drivers/leds/leds-as3645a.c index 98a69b1..b0df514 100644 --- a/drivers/leds/leds-as3645a.c +++ b/drivers/leds/leds-as3645a.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include #include @@ -148,8 +148,8 @@ struct as3645a { struct v4l2_flash *vf; struct v4l2_flash *vfind; - struct device_node *flash_node; - struct device_node *indicator_node; + struct fwnode_handle *flash_node; + struct fwnode_handle *indicator_node; struct as3645a_config cfg; @@ -493,30 +493,31 @@ static int as3645a_detect(struct as3645a *flash) static int as3645a_parse_node(struct as3645a *flash, struct as3645a_names *names, - struct device_node *node) + struct fwnode_handle *fwnode) { struct as3645a_config *cfg = &flash->cfg; - struct device_node *child; + struct fwnode_handle *child; const char *name; int rval; - for_each_child_of_node(node, child) { + fwnode_for_each_child_node(fwnode, child) { u32 id = 0; - of_property_read_u32(child, "reg", &id); + fwnode_property_read_u32(child, "reg", &id); switch (id) { case AS_LED_FLASH: - flash->flash_node = of_node_get(child); + flash->flash_node = child; break; case AS_LED_INDICATOR: - flash->indicator_node = of_node_get(child); + flash->indicator_node = child; break; default: dev_warn(&flash->client->dev, "unknown LED %u encountered, ignoring\n", id); break; } + fwnode_handle_get(child); } if (!flash->flash_node) { @@ -524,42 +525,46 @@ static int as3645a_parse_node(struct as3645a *flash, return -ENODEV; } - rval = of_property_read_string(flash->flash_node, "label", &name); - if (!rval) + rval = fwnode_property_read_string(flash->flash_node, "label", &name); + if (!rval) { strlcpy(names->flash, name, sizeof(names->flash)); - else + } else if (is_of_node(fwnode)) { snprintf(names->flash, sizeof(names->flash), - "%pOFn:flash", node); + "%pOFn:flash", to_of_node(fwnode)); + } else { + dev_err(&flash->client->dev, "flash node has no label!\n"); + return -EINVAL; + } - rval = of_property_read_u32(flash->flash_node, "flash-timeout-us", - &cfg->flash_timeout_us); + rval = fwnode_property_read_u32(flash->flash_node, "flash-timeout-us", + &cfg->flash_timeout_us); if (rval < 0) { dev_err(&flash->client->dev, "can't read flash-timeout-us property for flash\n"); goto out_err; } - rval = of_property_read_u32(flash->flash_node, "flash-max-microamp", - &cfg->flash_max_ua); + rval = fwnode_property_read_u32(flash->flash_node, "flash-max-microamp", + &cfg->flash_max_ua); if (rval < 0) { dev_err(&flash->client->dev, "can't read flash-max-microamp property for flash\n"); goto out_err; } - rval = of_property_read_u32(flash->flash_node, "led-max-microamp", - &cfg->assist_max_ua); + rval = fwnode_property_read_u32(flash->flash_node, "led-max-microamp", + &cfg->assist_max_ua); if (rval < 0) { dev_err(&flash->client->dev, "can't read led-max-microamp property for flash\n"); goto out_err; } - of_property_read_u32(flash->flash_node, "voltage-reference", - &cfg->voltage_reference); + fwnode_property_read_u32(flash->flash_node, "voltage-reference", + &cfg->voltage_reference); - of_property_read_u32(flash->flash_node, "ams,input-max-microamp", - &cfg->peak); + fwnode_property_read_u32(flash->flash_node, "ams,input-max-microamp", + &cfg->peak); cfg->peak = AS_PEAK_mA_TO_REG(cfg->peak); if (!flash->indicator_node) { @@ -568,15 +573,21 @@ static int as3645a_parse_node(struct as3645a *flash, goto out_err; } - rval = of_property_read_string(flash->indicator_node, "label", &name); - if (!rval) + rval = fwnode_property_read_string(flash->indicator_node, "label", + &name); + if (!rval) { strlcpy(names->indicator, name, sizeof(names->indicator)); - else + } else if (is_of_node(fwnode)) { snprintf(names->indicator, sizeof(names->indicator), - "%pOFn:indicator", node); + "%pOFn:indicator", to_of_node(fwnode)); + } else { + dev_err(&flash->client->dev, "indicator node has no label!\n"); + return -EINVAL; + } - rval = of_property_read_u32(flash->indicator_node, "led-max-microamp", - &cfg->indicator_max_ua); + rval = fwnode_property_read_u32(flash->indicator_node, + "led-max-microamp", + &cfg->indicator_max_ua); if (rval < 0) { dev_err(&flash->client->dev, "can't read led-max-microamp property for indicator\n"); @@ -586,8 +597,8 @@ static int as3645a_parse_node(struct as3645a *flash, return 0; out_err: - of_node_put(flash->flash_node); - of_node_put(flash->indicator_node); + fwnode_handle_put(flash->flash_node); + fwnode_handle_put(flash->indicator_node); return rval; } @@ -668,14 +679,14 @@ static int as3645a_v4l2_setup(struct as3645a *flash) strlcpy(cfgind.dev_name, flash->iled_cdev.name, sizeof(cfg.dev_name)); flash->vf = v4l2_flash_init( - &flash->client->dev, of_fwnode_handle(flash->flash_node), - &flash->fled, NULL, &cfg); + &flash->client->dev, flash->flash_node, &flash->fled, NULL, + &cfg); if (IS_ERR(flash->vf)) return PTR_ERR(flash->vf); flash->vfind = v4l2_flash_indicator_init( - &flash->client->dev, of_fwnode_handle(flash->indicator_node), - &flash->iled_cdev, &cfgind); + &flash->client->dev, flash->indicator_node, &flash->iled_cdev, + &cfgind); if (IS_ERR(flash->vfind)) { v4l2_flash_release(flash->vf); return PTR_ERR(flash->vfind); @@ -690,7 +701,7 @@ static int as3645a_probe(struct i2c_client *client) struct as3645a *flash; int rval; - if (client->dev.of_node == NULL) + if (!dev_fwnode(&client->dev)) return -ENODEV; flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); @@ -699,7 +710,7 @@ static int as3645a_probe(struct i2c_client *client) flash->client = client; - rval = as3645a_parse_node(flash, &names, client->dev.of_node); + rval = as3645a_parse_node(flash, &names, dev_fwnode(&client->dev)); if (rval < 0) return rval; @@ -731,8 +742,8 @@ out_mutex_destroy: mutex_destroy(&flash->mutex); out_put_nodes: - of_node_put(flash->flash_node); - of_node_put(flash->indicator_node); + fwnode_handle_put(flash->flash_node); + fwnode_handle_put(flash->indicator_node); return rval; } @@ -751,8 +762,8 @@ static int as3645a_remove(struct i2c_client *client) mutex_destroy(&flash->mutex); - of_node_put(flash->flash_node); - of_node_put(flash->indicator_node); + fwnode_handle_put(flash->flash_node); + fwnode_handle_put(flash->indicator_node); return 0; } diff --git a/drivers/leds/leds-blinkm.c b/drivers/leds/leds-blinkm.c index 851c192..11b771f 100644 --- a/drivers/leds/leds-blinkm.c +++ b/drivers/leds/leds-blinkm.c @@ -594,7 +594,6 @@ static int blinkm_probe(struct i2c_client *client, goto exit; } - data->i2c_addr = 0x09; data->i2c_addr = 0x08; /* i2c addr - use fake addr of 0x08 initially (real is 0x09) */ data->fw_ver = 0xfe; diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c new file mode 100644 index 0000000..180895b --- /dev/null +++ b/drivers/leds/leds-lm3532.c @@ -0,0 +1,683 @@ +// SPDX-License-Identifier: GPL-2.0 +// TI LM3532 LED driver +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LM3532_NAME "lm3532-led" +#define LM3532_BL_MODE_MANUAL 0x00 +#define LM3532_BL_MODE_ALS 0x01 + +#define LM3532_REG_OUTPUT_CFG 0x10 +#define LM3532_REG_STARTSHUT_RAMP 0x11 +#define LM3532_REG_RT_RAMP 0x12 +#define LM3532_REG_PWM_A_CFG 0x13 +#define LM3532_REG_PWM_B_CFG 0x14 +#define LM3532_REG_PWM_C_CFG 0x15 +#define LM3532_REG_ZONE_CFG_A 0x16 +#define LM3532_REG_CTRL_A_BRT 0x17 +#define LM3532_REG_ZONE_CFG_B 0x18 +#define LM3532_REG_CTRL_B_BRT 0x19 +#define LM3532_REG_ZONE_CFG_C 0x1a +#define LM3532_REG_CTRL_C_BRT 0x1b +#define LM3532_REG_ENABLE 0x1d +#define LM3532_ALS_CONFIG 0x23 +#define LM3532_REG_ZN_0_HI 0x60 +#define LM3532_REG_ZN_0_LO 0x61 +#define LM3532_REG_ZN_1_HI 0x62 +#define LM3532_REG_ZN_1_LO 0x63 +#define LM3532_REG_ZN_2_HI 0x64 +#define LM3532_REG_ZN_2_LO 0x65 +#define LM3532_REG_ZN_3_HI 0x66 +#define LM3532_REG_ZN_3_LO 0x67 +#define LM3532_REG_MAX 0x7e + +/* Contorl Enable */ +#define LM3532_CTRL_A_ENABLE BIT(0) +#define LM3532_CTRL_B_ENABLE BIT(1) +#define LM3532_CTRL_C_ENABLE BIT(2) + +/* PWM Zone Control */ +#define LM3532_PWM_ZONE_MASK 0x7c +#define LM3532_PWM_ZONE_0_EN BIT(2) +#define LM3532_PWM_ZONE_1_EN BIT(3) +#define LM3532_PWM_ZONE_2_EN BIT(4) +#define LM3532_PWM_ZONE_3_EN BIT(5) +#define LM3532_PWM_ZONE_4_EN BIT(6) + +/* Brightness Configuration */ +#define LM3532_I2C_CTRL BIT(0) +#define LM3532_ALS_CTRL 0 +#define LM3532_LINEAR_MAP BIT(1) +#define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4)) +#define LM3532_ZONE_0 0 +#define LM3532_ZONE_1 BIT(2) +#define LM3532_ZONE_2 BIT(3) +#define LM3532_ZONE_3 (BIT(2) | BIT(3)) +#define LM3532_ZONE_4 BIT(4) + +#define LM3532_ENABLE_ALS BIT(3) +#define LM3532_ALS_SEL_SHIFT 6 + +/* Zone Boundary Register */ +#define LM3532_ALS_WINDOW_mV 2000 +#define LM3532_ALS_ZB_MAX 4 +#define LM3532_ALS_OFFSET_mV 2 + +#define LM3532_CONTROL_A 0 +#define LM3532_CONTROL_B 1 +#define LM3532_CONTROL_C 2 +#define LM3532_MAX_CONTROL_BANKS 3 +#define LM3532_MAX_LED_STRINGS 3 + +#define LM3532_OUTPUT_CFG_MASK 0x3 +#define LM3532_BRT_VAL_ADJUST 8 +#define LM3532_RAMP_DOWN_SHIFT 3 + +#define LM3532_NUM_RAMP_VALS 8 +#define LM3532_NUM_AVG_VALS 8 +#define LM3532_NUM_IMP_VALS 32 + +/* + * struct lm3532_als_data + * @config - value of ALS configuration register + * @als1_imp_sel - value of ALS1 resistor select register + * @als2_imp_sel - value of ALS2 resistor select register + * @als_avrg_time - ALS averaging time + * @als_input_mode - ALS input mode for brightness control + * @als_vmin - Minimum ALS voltage + * @als_vmax - Maximum ALS voltage + * @zone_lo - values of ALS lo ZB(Zone Boundary) registers + * @zone_hi - values of ALS hi ZB(Zone Boundary) registers + */ +struct lm3532_als_data { + u8 config; + u8 als1_imp_sel; + u8 als2_imp_sel; + u8 als_avrg_time; + u8 als_input_mode; + u32 als_vmin; + u32 als_vmax; + u8 zones_lo[LM3532_ALS_ZB_MAX]; + u8 zones_hi[LM3532_ALS_ZB_MAX]; +}; + +/** + * struct lm3532_led + * @led_dev: led class device + * @priv - Pointer the device data structure + * @control_bank - Control bank the LED is associated to + * @mode - Mode of the LED string + * @num_leds - Number of LED strings are supported in this array + * @led_strings - The LED strings supported in this array + * @label - LED label + */ +struct lm3532_led { + struct led_classdev led_dev; + struct lm3532_data *priv; + + int control_bank; + int mode; + int num_leds; + u32 led_strings[LM3532_MAX_CONTROL_BANKS]; + char label[LED_MAX_NAME_SIZE]; +}; + +/** + * struct lm3532_data + * @enable_gpio - Hardware enable gpio + * @regulator: regulator + * @client: i2c client + * @regmap - Devices register map + * @dev - Pointer to the devices device struct + * @lock - Lock for reading/writing the device + * @als_data - Pointer to the als data struct + * @runtime_ramp_up - Runtime ramp up setting + * @runtime_ramp_down - Runtime ramp down setting + * @leds - Array of LED strings + */ +struct lm3532_data { + struct gpio_desc *enable_gpio; + struct regulator *regulator; + struct i2c_client *client; + struct regmap *regmap; + struct device *dev; + struct mutex lock; + + struct lm3532_als_data *als_data; + + u32 runtime_ramp_up; + u32 runtime_ramp_down; + + struct lm3532_led leds[]; +}; + +static const struct reg_default lm3532_reg_defs[] = { + {LM3532_REG_OUTPUT_CFG, 0xe4}, + {LM3532_REG_STARTSHUT_RAMP, 0xc0}, + {LM3532_REG_RT_RAMP, 0xc0}, + {LM3532_REG_PWM_A_CFG, 0x82}, + {LM3532_REG_PWM_B_CFG, 0x82}, + {LM3532_REG_PWM_C_CFG, 0x82}, + {LM3532_REG_ZONE_CFG_A, 0xf1}, + {LM3532_REG_CTRL_A_BRT, 0xf3}, + {LM3532_REG_ZONE_CFG_B, 0xf1}, + {LM3532_REG_CTRL_B_BRT, 0xf3}, + {LM3532_REG_ZONE_CFG_C, 0xf1}, + {LM3532_REG_CTRL_C_BRT, 0xf3}, + {LM3532_REG_ENABLE, 0xf8}, + {LM3532_ALS_CONFIG, 0x44}, + {LM3532_REG_ZN_0_HI, 0x35}, + {LM3532_REG_ZN_0_LO, 0x33}, + {LM3532_REG_ZN_1_HI, 0x6a}, + {LM3532_REG_ZN_1_LO, 0x66}, + {LM3532_REG_ZN_2_HI, 0xa1}, + {LM3532_REG_ZN_2_LO, 0x99}, + {LM3532_REG_ZN_3_HI, 0xdc}, + {LM3532_REG_ZN_3_LO, 0xcc}, +}; + +static const struct regmap_config lm3532_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LM3532_REG_MAX, + .reg_defaults = lm3532_reg_defs, + .num_reg_defaults = ARRAY_SIZE(lm3532_reg_defs), + .cache_type = REGCACHE_FLAT, +}; + +const static int als_imp_table[LM3532_NUM_IMP_VALS] = {37000, 18500, 12330, + 92500, 7400, 6170, 5290, + 4630, 4110, 3700, 3360, + 3080, 2850, 2640, 2440, + 2310, 2180, 2060, 1950, + 1850, 1760, 1680, 1610, + 1540, 1480, 1420, 1370, + 1320, 1280, 1230, 1190}; +static int lm3532_get_als_imp_index(int als_imped) +{ + int i; + + if (als_imped > als_imp_table[1]) + return 0; + + if (als_imped < als_imp_table[LM3532_NUM_IMP_VALS - 1]) + return LM3532_NUM_IMP_VALS - 1; + + for (i = 1; i < LM3532_NUM_IMP_VALS; i++) { + if (als_imped == als_imp_table[i]) + return i; + + /* Find an approximate index by looking up the table */ + if (als_imped < als_imp_table[i - 1] && + als_imped > als_imp_table[i]) { + if (als_imped - als_imp_table[i - 1] < + als_imp_table[i] - als_imped) + return i + 1; + else + return i; + } + } + + return -EINVAL; +} + +static int lm3532_get_index(const int table[], int size, int value) +{ + int i; + + for (i = 1; i < size; i++) { + if (value == table[i]) + return i; + + /* Find an approximate index by looking up the table */ + if (value > table[i - 1] && + value < table[i]) { + if (value - table[i - 1] < table[i] - value) + return i - 1; + else + return i; + } + } + + return -EINVAL; +} + +const static int als_avrg_table[LM3532_NUM_AVG_VALS] = {17920, 35840, 71680, + 1433360, 286720, 573440, + 1146880, 2293760}; +static int lm3532_get_als_avg_index(int avg_time) +{ + if (avg_time <= als_avrg_table[0]) + return 0; + + if (avg_time > als_avrg_table[LM3532_NUM_AVG_VALS - 1]) + return LM3532_NUM_AVG_VALS - 1; + + return lm3532_get_index(&als_avrg_table[0], LM3532_NUM_AVG_VALS, + avg_time); +} + +const static int ramp_table[LM3532_NUM_RAMP_VALS] = { 8, 1024, 2048, 4096, 8192, + 16384, 32768, 65536}; +static int lm3532_get_ramp_index(int ramp_time) +{ + if (ramp_time <= ramp_table[0]) + return 0; + + if (ramp_time > ramp_table[LM3532_NUM_RAMP_VALS - 1]) + return LM3532_NUM_RAMP_VALS - 1; + + return lm3532_get_index(&ramp_table[0], LM3532_NUM_RAMP_VALS, + ramp_time); +} + +static int lm3532_led_enable(struct lm3532_led *led_data) +{ + int ctrl_en_val = BIT(led_data->control_bank); + int ret; + + ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE, + ctrl_en_val, ctrl_en_val); + if (ret) { + dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret); + return ret; + } + + return regulator_enable(led_data->priv->regulator); +} + +static int lm3532_led_disable(struct lm3532_led *led_data) +{ + int ctrl_en_val = BIT(led_data->control_bank); + int ret; + + ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE, + ctrl_en_val, ~ctrl_en_val); + if (ret) { + dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret); + return ret; + } + + return regulator_disable(led_data->priv->regulator); +} + +static int lm3532_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brt_val) +{ + struct lm3532_led *led = + container_of(led_cdev, struct lm3532_led, led_dev); + u8 brightness_reg; + int ret; + + mutex_lock(&led->priv->lock); + + if (led->mode == LM3532_BL_MODE_ALS) { + if (brt_val > LED_OFF) + ret = lm3532_led_enable(led); + else + ret = lm3532_led_disable(led); + + goto unlock; + } + + if (brt_val == LED_OFF) { + ret = lm3532_led_disable(led); + goto unlock; + } + + ret = lm3532_led_enable(led); + if (ret) + goto unlock; + + brightness_reg = LM3532_REG_CTRL_A_BRT + led->control_bank * 2; + brt_val = brt_val / LM3532_BRT_VAL_ADJUST; + + ret = regmap_write(led->priv->regmap, brightness_reg, brt_val); + +unlock: + mutex_unlock(&led->priv->lock); + return ret; +} + +static int lm3532_init_registers(struct lm3532_led *led) +{ + struct lm3532_data *drvdata = led->priv; + unsigned int runtime_ramp_val; + unsigned int output_cfg_val = 0; + unsigned int output_cfg_shift = 0; + unsigned int output_cfg_mask = 0; + int ret, i; + + for (i = 0; i < led->num_leds; i++) { + output_cfg_shift = led->led_strings[i] * 2; + output_cfg_val |= (led->control_bank << output_cfg_shift); + output_cfg_mask |= LM3532_OUTPUT_CFG_MASK << output_cfg_shift; + } + + ret = regmap_update_bits(drvdata->regmap, LM3532_REG_OUTPUT_CFG, + output_cfg_mask, output_cfg_val); + if (ret) + return ret; + + runtime_ramp_val = drvdata->runtime_ramp_up | + (drvdata->runtime_ramp_down << LM3532_RAMP_DOWN_SHIFT); + + return regmap_write(drvdata->regmap, LM3532_REG_RT_RAMP, + runtime_ramp_val); +} + +static int lm3532_als_configure(struct lm3532_data *priv, + struct lm3532_led *led) +{ + struct lm3532_als_data *als = priv->als_data; + u32 als_vmin, als_vmax, als_vstep; + int zone_reg = LM3532_REG_ZN_0_HI; + int brightnes_config_reg; + int ret; + int i; + + als_vmin = als->als_vmin; + als_vmax = als->als_vmax; + + als_vstep = (als_vmax - als_vmin) / ((LM3532_ALS_ZB_MAX + 1) * 2); + + for (i = 0; i < LM3532_ALS_ZB_MAX; i++) { + als->zones_lo[i] = ((als_vmin + als_vstep + (i * als_vstep)) * + LED_FULL) / 1000; + als->zones_hi[i] = ((als_vmin + LM3532_ALS_OFFSET_mV + + als_vstep + (i * als_vstep)) * LED_FULL) / 1000; + + zone_reg = LM3532_REG_ZN_0_HI + i * 2; + ret = regmap_write(priv->regmap, zone_reg, als->zones_lo[i]); + if (ret) + return ret; + + zone_reg += 1; + ret = regmap_write(priv->regmap, zone_reg, als->zones_hi[i]); + if (ret) + return ret; + } + + als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) | + (als->als_input_mode << LM3532_ALS_SEL_SHIFT)); + + ret = regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config); + if (ret) + return ret; + + brightnes_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2; + + return regmap_update_bits(priv->regmap, brightnes_config_reg, + LM3532_I2C_CTRL, LM3532_ALS_CTRL); +} + +static int lm3532_parse_als(struct lm3532_data *priv) +{ + struct lm3532_als_data *als; + int als_avg_time; + int als_impedance; + int ret; + + als = devm_kzalloc(priv->dev, sizeof(*als), GFP_KERNEL); + if (als == NULL) + return -ENOMEM; + + ret = device_property_read_u32(&priv->client->dev, "ti,als-vmin", + &als->als_vmin); + if (ret) + als->als_vmin = 0; + + ret = device_property_read_u32(&priv->client->dev, "ti,als-vmax", + &als->als_vmax); + if (ret) + als->als_vmax = LM3532_ALS_WINDOW_mV; + + if (als->als_vmax > LM3532_ALS_WINDOW_mV) { + ret = -EINVAL; + return ret; + } + + ret = device_property_read_u32(&priv->client->dev, "ti,als1-imp-sel", + &als_impedance); + if (ret) + als->als1_imp_sel = 0; + else + als->als1_imp_sel = lm3532_get_als_imp_index(als_impedance); + + ret = device_property_read_u32(&priv->client->dev, "ti,als2-imp-sel", + &als_impedance); + if (ret) + als->als2_imp_sel = 0; + else + als->als2_imp_sel = lm3532_get_als_imp_index(als_impedance); + + ret = device_property_read_u32(&priv->client->dev, "ti,als-avrg-time-us", + &als_avg_time); + if (ret) + als->als_avrg_time = 0; + else + als->als_avrg_time = lm3532_get_als_avg_index(als_avg_time); + + ret = device_property_read_u8(&priv->client->dev, "ti,als-input-mode", + &als->als_input_mode); + if (ret) + als->als_input_mode = 0; + + if (als->als_input_mode > LM3532_BL_MODE_ALS) { + ret = -EINVAL; + return ret; + } + + priv->als_data = als; + + return ret; +} + +static int lm3532_parse_node(struct lm3532_data *priv) +{ + struct fwnode_handle *child = NULL; + struct lm3532_led *led; + const char *name; + int control_bank; + u32 ramp_time; + size_t i = 0; + int ret; + + priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev, + "enable", GPIOD_OUT_LOW); + if (IS_ERR(priv->enable_gpio)) + priv->enable_gpio = NULL; + + priv->regulator = devm_regulator_get(&priv->client->dev, "vin"); + if (IS_ERR(priv->regulator)) + priv->regulator = NULL; + + ret = device_property_read_u32(&priv->client->dev, "ramp-up-us", + &ramp_time); + if (ret) + dev_info(&priv->client->dev, "ramp-up-ms property missing\n"); + else + priv->runtime_ramp_up = lm3532_get_ramp_index(ramp_time); + + ret = device_property_read_u32(&priv->client->dev, "ramp-down-us", + &ramp_time); + if (ret) + dev_info(&priv->client->dev, "ramp-down-ms property missing\n"); + else + priv->runtime_ramp_down = lm3532_get_ramp_index(ramp_time); + + device_for_each_child_node(priv->dev, child) { + led = &priv->leds[i]; + + ret = fwnode_property_read_u32(child, "reg", &control_bank); + if (ret) { + dev_err(&priv->client->dev, "reg property missing\n"); + fwnode_handle_put(child); + goto child_out; + } + + if (control_bank > LM3532_CONTROL_C) { + dev_err(&priv->client->dev, "Control bank invalid\n"); + continue; + } + + led->control_bank = control_bank; + + ret = fwnode_property_read_u32(child, "ti,led-mode", + &led->mode); + if (ret) { + dev_err(&priv->client->dev, "ti,led-mode property missing\n"); + fwnode_handle_put(child); + goto child_out; + } + + if (led->mode == LM3532_BL_MODE_ALS) { + ret = lm3532_parse_als(priv); + if (ret) + dev_err(&priv->client->dev, "Failed to parse als\n"); + else + lm3532_als_configure(priv, led); + } + + led->num_leds = fwnode_property_read_u32_array(child, + "led-sources", + NULL, 0); + + if (led->num_leds > LM3532_MAX_LED_STRINGS) { + dev_err(&priv->client->dev, "To many LED string defined\n"); + continue; + } + + ret = fwnode_property_read_u32_array(child, "led-sources", + led->led_strings, + led->num_leds); + if (ret) { + dev_err(&priv->client->dev, "led-sources property missing\n"); + fwnode_handle_put(child); + goto child_out; + } + + fwnode_property_read_string(child, "linux,default-trigger", + &led->led_dev.default_trigger); + + ret = fwnode_property_read_string(child, "label", &name); + if (ret) + snprintf(led->label, sizeof(led->label), + "%s::", priv->client->name); + else + snprintf(led->label, sizeof(led->label), + "%s:%s", priv->client->name, name); + + led->priv = priv; + led->led_dev.name = led->label; + led->led_dev.brightness_set_blocking = lm3532_brightness_set; + + ret = devm_led_classdev_register(priv->dev, &led->led_dev); + if (ret) { + dev_err(&priv->client->dev, "led register err: %d\n", + ret); + fwnode_handle_put(child); + goto child_out; + } + + lm3532_init_registers(led); + + i++; + } + +child_out: + return ret; +} + +static int lm3532_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm3532_data *drvdata; + int ret = 0; + int count; + + count = device_get_child_node_count(&client->dev); + if (!count) { + dev_err(&client->dev, "LEDs are not defined in device tree!"); + return -ENODEV; + } + + drvdata = devm_kzalloc(&client->dev, struct_size(drvdata, leds, count), + GFP_KERNEL); + if (drvdata == NULL) + return -ENOMEM; + + drvdata->client = client; + drvdata->dev = &client->dev; + + drvdata->regmap = devm_regmap_init_i2c(client, &lm3532_regmap_config); + if (IS_ERR(drvdata->regmap)) { + ret = PTR_ERR(drvdata->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + mutex_init(&drvdata->lock); + i2c_set_clientdata(client, drvdata); + + ret = lm3532_parse_node(drvdata); + if (ret) { + dev_err(&client->dev, "Failed to parse node\n"); + return ret; + } + + if (drvdata->enable_gpio) + gpiod_direction_output(drvdata->enable_gpio, 1); + + return ret; +} + +static int lm3532_remove(struct i2c_client *client) +{ + struct lm3532_data *drvdata = i2c_get_clientdata(client); + + mutex_destroy(&drvdata->lock); + + if (drvdata->enable_gpio) + gpiod_direction_output(drvdata->enable_gpio, 0); + + return 0; +} + +static const struct of_device_id of_lm3532_leds_match[] = { + { .compatible = "ti,lm3532", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_lm3532_leds_match); + +static const struct i2c_device_id lm3532_id[] = { + {LM3532_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, lm3532_id); + +static struct i2c_driver lm3532_i2c_driver = { + .probe = lm3532_probe, + .remove = lm3532_remove, + .id_table = lm3532_id, + .driver = { + .name = LM3532_NAME, + .of_match_table = of_lm3532_leds_match, + }, +}; +module_i2c_driver(lm3532_i2c_driver); + +MODULE_DESCRIPTION("Back Light driver for LM3532"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Dan Murphy "); diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c index de3623e..83e8e58 100644 --- a/drivers/leds/leds-lt3593.c +++ b/drivers/leds/leds-lt3593.c @@ -60,67 +60,14 @@ static int lt3593_led_set(struct led_classdev *led_cdev, return 0; } -static struct lt3593_led_data *lt3593_led_probe_pdata(struct device *dev) -{ - struct gpio_led_platform_data *pdata = dev_get_platdata(dev); - const struct gpio_led *template = &pdata->leds[0]; - struct lt3593_led_data *led_data; - int ret, state; - - if (pdata->num_leds != 1) - return ERR_PTR(-EINVAL); - - led_data = devm_kzalloc(dev, sizeof(*led_data), GFP_KERNEL); - if (!led_data) - return ERR_PTR(-ENOMEM); - - led_data->cdev.name = template->name; - led_data->cdev.default_trigger = template->default_trigger; - led_data->cdev.brightness_set_blocking = lt3593_led_set; - - state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); - led_data->cdev.brightness = state ? LED_FULL : LED_OFF; - - if (!template->retain_state_suspended) - led_data->cdev.flags |= LED_CORE_SUSPENDRESUME; - - ret = devm_gpio_request_one(dev, template->gpio, state ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, - template->name); - if (ret < 0) - return ERR_PTR(ret); - - led_data->gpiod = gpio_to_desc(template->gpio); - if (!led_data->gpiod) - return ERR_PTR(-EPROBE_DEFER); - - ret = devm_led_classdev_register(dev, &led_data->cdev); - if (ret < 0) - return ERR_PTR(ret); - - dev_info(dev, "registered LT3593 LED '%s' at GPIO %d\n", - template->name, template->gpio); - - return led_data; -} - static int lt3593_led_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct lt3593_led_data *led_data; struct fwnode_handle *child; int ret, state = LEDS_GPIO_DEFSTATE_OFF; - enum gpiod_flags flags = GPIOD_OUT_LOW; const char *tmp; - if (dev_get_platdata(dev)) { - led_data = lt3593_led_probe_pdata(dev); - if (IS_ERR(led_data)) - return PTR_ERR(led_data); - - goto out; - } - if (!dev->of_node) return -ENODEV; @@ -151,13 +98,8 @@ static int lt3593_led_probe(struct platform_device *pdev) &led_data->cdev.default_trigger); if (!fwnode_property_read_string(child, "default-state", &tmp)) { - if (!strcmp(tmp, "keep")) { - state = LEDS_GPIO_DEFSTATE_KEEP; - flags = GPIOD_ASIS; - } else if (!strcmp(tmp, "on")) { + if (!strcmp(tmp, "on")) state = LEDS_GPIO_DEFSTATE_ON; - flags = GPIOD_OUT_HIGH; - } } led_data->cdev.name = led_data->name; @@ -171,20 +113,16 @@ static int lt3593_led_probe(struct platform_device *pdev) } led_data->cdev.dev->of_node = dev->of_node; - -out: platform_set_drvdata(pdev, led_data); return 0; } -#ifdef CONFIG_OF static const struct of_device_id of_lt3593_leds_match[] = { { .compatible = "lltc,lt3593", }, {}, }; MODULE_DEVICE_TABLE(of, of_lt3593_leds_match); -#endif static struct platform_driver lt3593_led_driver = { .probe = lt3593_led_probe, diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c index f51b356..a9f5dad 100644 --- a/drivers/leds/leds-pca955x.c +++ b/drivers/leds/leds-pca955x.c @@ -40,7 +40,6 @@ * bits the chip supports. */ -#include #include #include #include @@ -48,8 +47,8 @@ #include #include #include -#include #include +#include #include #include @@ -110,15 +109,6 @@ static const struct i2c_device_id pca955x_id[] = { }; MODULE_DEVICE_TABLE(i2c, pca955x_id); -static const struct acpi_device_id pca955x_acpi_ids[] = { - { "PCA9550", pca9550 }, - { "PCA9551", pca9551 }, - { "PCA9552", pca9552 }, - { "PCA9553", pca9553 }, - { } -}; -MODULE_DEVICE_TABLE(acpi, pca955x_acpi_ids); - struct pca955x { struct mutex lock; struct pca955x_led *leds; @@ -373,16 +363,14 @@ static int pca955x_gpio_direction_output(struct gpio_chip *gc, } #endif /* CONFIG_LEDS_PCA955X_GPIO */ -#if IS_ENABLED(CONFIG_OF) static struct pca955x_platform_data * -pca955x_pdata_of_init(struct i2c_client *client, struct pca955x_chipdef *chip) +pca955x_get_pdata(struct i2c_client *client, struct pca955x_chipdef *chip) { - struct device_node *np = client->dev.of_node; - struct device_node *child; struct pca955x_platform_data *pdata; + struct fwnode_handle *child; int count; - count = of_get_child_count(np); + count = device_get_child_node_count(&client->dev); if (!count || count > chip->bits) return ERR_PTR(-ENODEV); @@ -396,24 +384,25 @@ pca955x_pdata_of_init(struct i2c_client *client, struct pca955x_chipdef *chip) if (!pdata->leds) return ERR_PTR(-ENOMEM); - for_each_child_of_node(np, child) { + device_for_each_child_node(&client->dev, child) { const char *name; u32 reg; int res; - res = of_property_read_u32(child, "reg", ®); + res = fwnode_property_read_u32(child, "reg", ®); if ((res != 0) || (reg >= chip->bits)) continue; - if (of_property_read_string(child, "label", &name)) - name = child->name; + res = fwnode_property_read_string(child, "label", &name); + if ((res != 0) && is_of_node(child)) + name = to_of_node(child)->name; snprintf(pdata->leds[reg].name, sizeof(pdata->leds[reg].name), "%s", name); pdata->leds[reg].type = PCA955X_TYPE_LED; - of_property_read_u32(child, "type", &pdata->leds[reg].type); - of_property_read_string(child, "linux,default-trigger", + fwnode_property_read_u32(child, "type", &pdata->leds[reg].type); + fwnode_property_read_string(child, "linux,default-trigger", &pdata->leds[reg].default_trigger); } @@ -429,15 +418,7 @@ static const struct of_device_id of_pca955x_match[] = { { .compatible = "nxp,pca9553", .data = (void *)pca9553 }, {}, }; - MODULE_DEVICE_TABLE(of, of_pca955x_match); -#else -static struct pca955x_platform_data * -pca955x_pdata_of_init(struct i2c_client *client, struct pca955x_chipdef *chip) -{ - return ERR_PTR(-ENODEV); -} -#endif static int pca955x_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -450,20 +431,11 @@ static int pca955x_probe(struct i2c_client *client, struct pca955x_platform_data *pdata; int ngpios = 0; - if (id) { - chip = &pca955x_chipdefs[id->driver_data]; - } else { - const struct acpi_device_id *acpi_id; - - acpi_id = acpi_match_device(pca955x_acpi_ids, &client->dev); - if (!acpi_id) - return -ENODEV; - chip = &pca955x_chipdefs[acpi_id->driver_data]; - } + chip = &pca955x_chipdefs[id->driver_data]; adapter = to_i2c_adapter(client->dev.parent); pdata = dev_get_platdata(&client->dev); if (!pdata) { - pdata = pca955x_pdata_of_init(client, chip); + pdata = pca955x_get_pdata(client, chip); if (IS_ERR(pdata)) return PTR_ERR(pdata); } @@ -602,8 +574,7 @@ static int pca955x_probe(struct i2c_client *client, static struct i2c_driver pca955x_driver = { .driver = { .name = "leds-pca955x", - .acpi_match_table = ACPI_PTR(pca955x_acpi_ids), - .of_match_table = of_match_ptr(of_pca955x_match), + .of_match_table = of_pca955x_match, }, .probe = pca955x_probe, .id_table = pca955x_id, diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c index 5c09081..9b4ef07 100644 --- a/drivers/leds/leds-pca963x.c +++ b/drivers/leds/leds-pca963x.c @@ -25,7 +25,6 @@ * or by adding the 'nxp,hw-blink' property to the DTS. */ -#include #include #include #include @@ -33,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -97,15 +97,6 @@ static const struct i2c_device_id pca963x_id[] = { }; MODULE_DEVICE_TABLE(i2c, pca963x_id); -static const struct acpi_device_id pca963x_acpi_ids[] = { - { "PCA9632", pca9633 }, - { "PCA9633", pca9633 }, - { "PCA9634", pca9634 }, - { "PCA9635", pca9635 }, - { } -}; -MODULE_DEVICE_TABLE(acpi, pca963x_acpi_ids); - struct pca963x_led; struct pca963x { @@ -287,16 +278,15 @@ static int pca963x_blink_set(struct led_classdev *led_cdev, return 0; } -#if IS_ENABLED(CONFIG_OF) static struct pca963x_platform_data * -pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip) +pca963x_get_pdata(struct i2c_client *client, struct pca963x_chipdef *chip) { - struct device_node *np = client->dev.of_node, *child; struct pca963x_platform_data *pdata; struct led_info *pca963x_leds; + struct fwnode_handle *child; int count; - count = of_get_child_count(np); + count = device_get_child_node_count(&client->dev); if (!count || count > chip->n_leds) return ERR_PTR(-ENODEV); @@ -305,18 +295,22 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip) if (!pca963x_leds) return ERR_PTR(-ENOMEM); - for_each_child_of_node(np, child) { + device_for_each_child_node(&client->dev, child) { struct led_info led = {}; u32 reg; int res; - res = of_property_read_u32(child, "reg", ®); + res = fwnode_property_read_u32(child, "reg", ®); if ((res != 0) || (reg >= chip->n_leds)) continue; - led.name = - of_get_property(child, "label", NULL) ? : child->name; - led.default_trigger = - of_get_property(child, "linux,default-trigger", NULL); + + res = fwnode_property_read_string(child, "label", &led.name); + if ((res != 0) && is_of_node(child)) + led.name = to_of_node(child)->name; + + fwnode_property_read_string(child, "linux,default-trigger", + &led.default_trigger); + pca963x_leds[reg] = led; } pdata = devm_kzalloc(&client->dev, @@ -328,22 +322,23 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip) pdata->leds.num_leds = chip->n_leds; /* default to open-drain unless totem pole (push-pull) is specified */ - if (of_property_read_bool(np, "nxp,totem-pole")) + if (device_property_read_bool(&client->dev, "nxp,totem-pole")) pdata->outdrv = PCA963X_TOTEM_POLE; else pdata->outdrv = PCA963X_OPEN_DRAIN; /* default to software blinking unless hardware blinking is specified */ - if (of_property_read_bool(np, "nxp,hw-blink")) + if (device_property_read_bool(&client->dev, "nxp,hw-blink")) pdata->blink_type = PCA963X_HW_BLINK; else pdata->blink_type = PCA963X_SW_BLINK; - if (of_property_read_u32(np, "nxp,period-scale", &chip->scaling)) + if (device_property_read_u32(&client->dev, "nxp,period-scale", + &chip->scaling)) chip->scaling = 1000; /* default to non-inverted output, unless inverted is specified */ - if (of_property_read_bool(np, "nxp,inverted-out")) + if (device_property_read_bool(&client->dev, "nxp,inverted-out")) pdata->dir = PCA963X_INVERTED; else pdata->dir = PCA963X_NORMAL; @@ -359,13 +354,6 @@ static const struct of_device_id of_pca963x_match[] = { {}, }; MODULE_DEVICE_TABLE(of, of_pca963x_match); -#else -static struct pca963x_platform_data * -pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip) -{ - return ERR_PTR(-ENODEV); -} -#endif static int pca963x_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -376,20 +364,11 @@ static int pca963x_probe(struct i2c_client *client, struct pca963x_chipdef *chip; int i, err; - if (id) { - chip = &pca963x_chipdefs[id->driver_data]; - } else { - const struct acpi_device_id *acpi_id; - - acpi_id = acpi_match_device(pca963x_acpi_ids, &client->dev); - if (!acpi_id) - return -ENODEV; - chip = &pca963x_chipdefs[acpi_id->driver_data]; - } + chip = &pca963x_chipdefs[id->driver_data]; pdata = dev_get_platdata(&client->dev); if (!pdata) { - pdata = pca963x_dt_init(client, chip); + pdata = pca963x_get_pdata(client, chip); if (IS_ERR(pdata)) { dev_warn(&client->dev, "could not parse configuration\n"); pdata = NULL; @@ -495,8 +474,7 @@ static int pca963x_remove(struct i2c_client *client) static struct i2c_driver pca963x_driver = { .driver = { .name = "leds-pca963x", - .of_match_table = of_match_ptr(of_pca963x_match), - .acpi_match_table = ACPI_PTR(pca963x_acpi_ids), + .of_match_table = of_pca963x_match, }, .probe = pca963x_probe, .remove = pca963x_remove, diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c index 37d0bdb..b06cb90 100644 --- a/drivers/mfd/ti-lmu.c +++ b/drivers/mfd/ti-lmu.c @@ -54,14 +54,6 @@ static void ti_lmu_disable_hw(void *data) gpiod_set_value(lmu->en_gpio, 0); } -static const struct mfd_cell lm3532_devices[] = { - { - .name = "ti-lmu-backlight", - .id = LM3532, - .of_compatible = "ti,lm3532-backlight", - }, -}; - #define LM363X_REGULATOR(_id) \ { \ .name = "lm363x-regulator", \ @@ -141,7 +133,6 @@ static const struct ti_lmu_data chip##_data = \ .max_register = max_reg, \ } \ -TI_LMU_DATA(lm3532, LM3532_MAX_REG); TI_LMU_DATA(lm3631, LM3631_MAX_REG); TI_LMU_DATA(lm3632, LM3632_MAX_REG); TI_LMU_DATA(lm3633, LM3633_MAX_REG); @@ -211,7 +202,6 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id) } static const struct of_device_id ti_lmu_of_match[] = { - { .compatible = "ti,lm3532", .data = &lm3532_data }, { .compatible = "ti,lm3631", .data = &lm3631_data }, { .compatible = "ti,lm3632", .data = &lm3632_data }, { .compatible = "ti,lm3633", .data = &lm3633_data }, @@ -222,7 +212,6 @@ static const struct of_device_id ti_lmu_of_match[] = { MODULE_DEVICE_TABLE(of, ti_lmu_of_match); static const struct i2c_device_id ti_lmu_ids[] = { - { "lm3532", LM3532 }, { "lm3631", LM3631 }, { "lm3632", LM3632 }, { "lm3633", LM3633 }, diff --git a/include/linux/mfd/ti-lmu-register.h b/include/linux/mfd/ti-lmu-register.h index 2125c7c..f095105 100644 --- a/include/linux/mfd/ti-lmu-register.h +++ b/include/linux/mfd/ti-lmu-register.h @@ -15,50 +15,6 @@ #include -/* LM3532 */ -#define LM3532_REG_OUTPUT_CFG 0x10 -#define LM3532_ILED1_CFG_MASK 0x03 -#define LM3532_ILED2_CFG_MASK 0x0C -#define LM3532_ILED3_CFG_MASK 0x30 -#define LM3532_ILED1_CFG_SHIFT 0 -#define LM3532_ILED2_CFG_SHIFT 2 -#define LM3532_ILED3_CFG_SHIFT 4 - -#define LM3532_REG_RAMPUP 0x12 -#define LM3532_REG_RAMPDN LM3532_REG_RAMPUP -#define LM3532_RAMPUP_MASK 0x07 -#define LM3532_RAMPUP_SHIFT 0 -#define LM3532_RAMPDN_MASK 0x38 -#define LM3532_RAMPDN_SHIFT 3 - -#define LM3532_REG_ENABLE 0x1D - -#define LM3532_REG_PWM_A_CFG 0x13 -#define LM3532_PWM_A_MASK 0x05 /* zone 0 */ -#define LM3532_PWM_ZONE_0 BIT(2) - -#define LM3532_REG_PWM_B_CFG 0x14 -#define LM3532_PWM_B_MASK 0x09 /* zone 1 */ -#define LM3532_PWM_ZONE_1 BIT(3) - -#define LM3532_REG_PWM_C_CFG 0x15 -#define LM3532_PWM_C_MASK 0x11 /* zone 2 */ -#define LM3532_PWM_ZONE_2 BIT(4) - -#define LM3532_REG_ZONE_CFG_A 0x16 -#define LM3532_REG_ZONE_CFG_B 0x18 -#define LM3532_REG_ZONE_CFG_C 0x1A -#define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4)) -#define LM3532_ZONE_0 0 -#define LM3532_ZONE_1 BIT(2) -#define LM3532_ZONE_2 BIT(3) - -#define LM3532_REG_BRT_A 0x70 /* zone 0 */ -#define LM3532_REG_BRT_B 0x76 /* zone 1 */ -#define LM3532_REG_BRT_C 0x7C /* zone 2 */ - -#define LM3532_MAX_REG 0x7E - /* LM3631 */ #define LM3631_REG_DEVCTRL 0x00 #define LM3631_LCD_EN_MASK BIT(1) diff --git a/include/linux/mfd/ti-lmu.h b/include/linux/mfd/ti-lmu.h index 1ef51ed..7762c1b 100644 --- a/include/linux/mfd/ti-lmu.h +++ b/include/linux/mfd/ti-lmu.h @@ -22,7 +22,6 @@ #define LMU_EVENT_MONITOR_DONE 0x01 enum ti_lmu_id { - LM3532, LM3631, LM3632, LM3633, diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index 19bee72..ecbe5f3 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -291,8 +291,8 @@ static bool toneport_has_led(struct usb_line6_toneport *toneport) } } -static const char * const led_colors[2] = { "red", "green" }; -static const int led_init_vals[2] = { 0x00, 0x26 }; +static const char * const toneport_led_colors[2] = { "red", "green" }; +static const int toneport_led_init_vals[2] = { 0x00, 0x26 }; static void toneport_update_led(struct usb_line6_toneport *toneport) { @@ -320,9 +320,9 @@ static int toneport_init_leds(struct usb_line6_toneport *toneport) led->toneport = toneport; snprintf(led->name, sizeof(led->name), "%s::%s", - dev_name(dev), led_colors[i]); + dev_name(dev), toneport_led_colors[i]); leddev->name = led->name; - leddev->brightness = led_init_vals[i]; + leddev->brightness = toneport_led_init_vals[i]; leddev->max_brightness = 0x26; leddev->brightness_set = toneport_led_brightness_set; err = led_classdev_register(dev, leddev);