Merge branch 'akpm' (patches from Andrew)

8fe3ccae · Linus Torvalds <[email protected]> · 2017-03-10 08:34:42 -08:00

Merge fixes from Andrew Morton:
 "26 fixes"

* emailed patches from Andrew Morton <[email protected]>: (26 commits)
  userfaultfd: remove wrong comment from userfaultfd_ctx_get()
  fat: fix using uninitialized fields of fat_inode/fsinfo_inode
  sh: cayman: IDE support fix
  kasan: fix races in quarantine_remove_cache()
  kasan: resched in quarantine_remove_cache()
  mm: do not call mem_cgroup_free() from within mem_cgroup_alloc()
  thp: fix another corner case of munlock() vs. THPs
  rmap: fix NULL-pointer dereference on THP munlocking
  mm/memblock.c: fix memblock_next_valid_pfn()
  userfaultfd: selftest: vm: allow to build in vm/ directory
  userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED
  userfaultfd: non-cooperative: fix fork fctx->new memleak
  mm/cgroup: avoid panic when init with low memory
  drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h
  mm/vmstats: add thp_split_pud event for clarity
  include/linux/fs.h: fix unsigned enum warning with gcc-4.2
  userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete
  userfaultfd: non-cooperative: robustness check
  userfaultfd: non-cooperative: rollback userfaultfd_exit
  x86, mm: unify exit paths in gup_pte_range()
  ...

Commit: 8fe3ccaed080a7804bc459c42e0419253973be92
Parents: 9db61d6f · 2378cd61

Merge commit. Changes below are compared with the first parent: 9db61d6f.

Changes

54 files changed · +277 −185

File	Status	Add	Del	Content
Documentation/dev-tools/kcov.rst	modified	+1	−1	View file
Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt	modified	+1	−1	View file
Documentation/vm/userfaultfd.txt	modified	+0	−4	View file
arch/cris/arch-v32/drivers/cryptocop.c	modified	+1	−1	View file
arch/powerpc/include/asm/book3s/64/pgtable.h	modified	+55	−30	View file
arch/powerpc/kvm/book3s_64_mmu_hv.c	modified	+1	−1	View file
arch/powerpc/kvm/book3s_hv_rm_mmu.c	modified	+1	−1	View file
arch/sh/boards/mach-cayman/setup.c	modified	+0	−2	View file
arch/x86/kernel/ftrace.c	modified	+1	−1	View file
arch/x86/mm/gup.c	modified	+21	−16	View file
drivers/block/paride/pcd.c	modified	+1	−1	View file
drivers/block/paride/pd.c	modified	+1	−1	View file
drivers/block/paride/pf.c	modified	+1	−1	View file
drivers/block/paride/pg.c	modified	+1	−1	View file
drivers/block/paride/pt.c	modified	+1	−1	View file
drivers/crypto/ux500/cryp/cryp.c	modified	+1	−1	View file
drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c	modified	+1	−1	View file
drivers/hv/channel.c	modified	+1	−1	View file
drivers/isdn/hisax/st5481_b.c	modified	+1	−1	View file
drivers/md/bcache/util.h	modified	+0	−1	View file
drivers/media/dvb-frontends/drx39xyj/drx_driver.h	modified	+3	−5	View file
drivers/mtd/spi-nor/spi-nor.c	modified	+1	−1	View file
drivers/net/ethernet/qlogic/qlge/qlge.h	modified	+2	−2	View file
drivers/scsi/aic7xxx/aic79xx_core.c	modified	+1	−1	View file
drivers/usb/gadget/legacy/inode.c	modified	+1	−2	View file
drivers/usb/host/xhci.c	modified	+2	−2	View file
fs/fat/inode.c	modified	+12	−1	View file
fs/userfaultfd.c	modified	+21	−48	View file
include/dt-bindings/sound/cs42l42.h	modified	+1	−1	View file
include/linux/fs.h	modified	+1	−1	View file
include/linux/regulator/machine.h	modified	+1	−1	View file
include/linux/userfaultfd_k.h	modified	+3	−10	View file
include/linux/vm_event_item.h	modified	+3	−0	View file
include/net/irda/timer.h	modified	+1	−1	View file
include/uapi/linux/userfaultfd.h	modified	+1	−4	View file
kernel/cgroup/cgroup.c	modified	+1	−1	View file
kernel/events/core.c	modified	+1	−1	View file
kernel/exit.c	modified	+0	−1	View file
kernel/trace/trace_stack.c	modified	+1	−1	View file
mm/huge_memory.c	modified	+1	−1	View file
mm/kasan/quarantine.c	modified	+44	−7	View file
mm/madvise.c	modified	+41	−3	View file
mm/memblock.c	modified	+4	−1	View file
mm/memcontrol.c	modified	+13	−5	View file
mm/mlock.c	modified	+4	−5	View file
mm/rmap.c	modified	+7	−6	View file
mm/vmstat.c	modified	+3	−0	View file
scripts/spelling.txt	modified	+3	−0	View file
sound/soc/amd/acp-pcm-dma.c	modified	+1	−1	View file
tools/lguest/lguest.c	modified	+1	−1	View file
tools/lib/bpf/Makefile	modified	+1	−1	View file
tools/lib/traceevent/Makefile	modified	+1	−1	View file
tools/lib/traceevent/event-parse.h	modified	+1	−1	View file
tools/testing/selftests/vm/Makefile	modified	+4	−0	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/dev-tools/kcov.rst

View file

diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst
index 2c41b71..44886c9 100644
--- a/Documentation/dev-tools/kcov.rst
+++ b/Documentation/dev-tools/kcov.rst
@@ -10,7 +10,7 @@ Note that kcov does not aim to collect as much coverage as possible. It aims
 to collect more or less stable coverage that is function of syscall inputs.
 To achieve this goal it does not collect coverage in soft/hard interrupts
 and instrumentation of some inherently non-deterministic parts of kernel is
-disbled (e.g. scheduler, locking).
+disabled (e.g. scheduler, locking).
 
 Usage
 -----

Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt

View file

diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
index c3f6546..6a23ad9 100644
--- a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
@@ -45,7 +45,7 @@ Required Properties:
 Optional Properties:
 - reg-names: In addition to the required properties, the following are optional
   - "efuse-address"	- Contains efuse base address used to pick up ABB info.
-  - "ldo-address"	- Contains address of ABB LDO overide register address.
+  - "ldo-address"	- Contains address of ABB LDO override register.
 	"efuse-address" is required for this.
 - ti,ldovbb-vset-mask	- Required if ldo-address is set, mask for LDO override
 	register to provide override vset value.

Documentation/vm/userfaultfd.txt

View file

diff --git a/Documentation/vm/userfaultfd.txt b/Documentation/vm/userfaultfd.txt
index 0e5543a..bb2f945 100644
--- a/Documentation/vm/userfaultfd.txt
+++ b/Documentation/vm/userfaultfd.txt
@@ -172,10 +172,6 @@ the same read(2) protocol as for the page fault notifications. The
 manager has to explicitly enable these events by setting appropriate
 bits in uffdio_api.features passed to UFFDIO_API ioctl:
 
-UFFD_FEATURE_EVENT_EXIT - enable notification about exit() of the
-non-cooperative process. When the monitored process exits, the uffd
-manager will get UFFD_EVENT_EXIT.
-
 UFFD_FEATURE_EVENT_FORK - enable userfaultfd hooks for fork(). When
 this feature is enabled, the userfaultfd context of the parent process
 is duplicated into the newly created process. The manager receives

arch/cris/arch-v32/drivers/cryptocop.c

View file

diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index ae6903d..14970f1 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -2086,7 +2086,7 @@ static void cryptocop_job_queue_close(void)
 		dma_in_cfg.en = regk_dma_no;
 		REG_WR(dma, IN_DMA_INST, rw_cfg, dma_in_cfg);
 
-		/* Disble the cryptocop. */
+		/* Disable the cryptocop. */
 		rw_cfg = REG_RD(strcop, regi_strcop, rw_cfg);
 		rw_cfg.en = 0;
 		REG_WR(strcop, regi_strcop, rw_cfg, rw_cfg);

arch/powerpc/include/asm/book3s/64/pgtable.h

View file

diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 1eeeb72..ec1e731 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -347,23 +347,58 @@ static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
 	__r;							\
 })
 
+static inline int __pte_write(pte_t pte)
+{
+	return !!(pte_raw(pte) & cpu_to_be64(_PAGE_WRITE));
+}
+
+#ifdef CONFIG_NUMA_BALANCING
+#define pte_savedwrite pte_savedwrite
+static inline bool pte_savedwrite(pte_t pte)
+{
+	/*
+	 * Saved write ptes are prot none ptes that doesn't have
+	 * privileged bit sit. We mark prot none as one which has
+	 * present and pviliged bit set and RWX cleared. To mark
+	 * protnone which used to have _PAGE_WRITE set we clear
+	 * the privileged bit.
+	 */
+	return !(pte_raw(pte) & cpu_to_be64(_PAGE_RWX | _PAGE_PRIVILEGED));
+}
+#else
+#define pte_savedwrite pte_savedwrite
+static inline bool pte_savedwrite(pte_t pte)
+{
+	return false;
+}
+#endif
+
+static inline int pte_write(pte_t pte)
+{
+	return __pte_write(pte) || pte_savedwrite(pte);
+}
+
 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 				      pte_t *ptep)
 {
-	if ((pte_raw(*ptep) & cpu_to_be64(_PAGE_WRITE)) == 0)
-		return;
-
-	pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 0);
+	if (__pte_write(*ptep))
+		pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 0);
+	else if (unlikely(pte_savedwrite(*ptep)))
+		pte_update(mm, addr, ptep, 0, _PAGE_PRIVILEGED, 0);
 }
 
 static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 					   unsigned long addr, pte_t *ptep)
 {
-	if ((pte_raw(*ptep) & cpu_to_be64(_PAGE_WRITE)) == 0)
-		return;
-
-	pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 1);
+	/*
+	 * We should not find protnone for hugetlb, but this complete the
+	 * interface.
+	 */
+	if (__pte_write(*ptep))
+		pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 1);
+	else if (unlikely(pte_savedwrite(*ptep)))
+		pte_update(mm, addr, ptep, 0, _PAGE_PRIVILEGED, 1);
 }
 
 #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
@@ -397,11 +432,6 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
 	pte_update(mm, addr, ptep, ~0UL, 0, 0);
 }
 
-static inline int pte_write(pte_t pte)
-{
-	return !!(pte_raw(pte) & cpu_to_be64(_PAGE_WRITE));
-}
-
 static inline int pte_dirty(pte_t pte)
 {
 	return !!(pte_raw(pte) & cpu_to_be64(_PAGE_DIRTY));
@@ -465,19 +495,12 @@ static inline pte_t pte_clear_savedwrite(pte_t pte)
 	VM_BUG_ON(!pte_protnone(pte));
 	return __pte(pte_val(pte) | _PAGE_PRIVILEGED);
 }
-
-#define pte_savedwrite pte_savedwrite
-static inline bool pte_savedwrite(pte_t pte)
+#else
+#define pte_clear_savedwrite pte_clear_savedwrite
+static inline pte_t pte_clear_savedwrite(pte_t pte)
 {
-	/*
-	 * Saved write ptes are prot none ptes that doesn't have
-	 * privileged bit sit. We mark prot none as one which has
-	 * present and pviliged bit set and RWX cleared. To mark
-	 * protnone which used to have _PAGE_WRITE set we clear
-	 * the privileged bit.
-	 */
-	VM_BUG_ON(!pte_protnone(pte));
-	return !(pte_raw(pte) & cpu_to_be64(_PAGE_RWX | _PAGE_PRIVILEGED));
+	VM_WARN_ON(1);
+	return __pte(pte_val(pte) & ~_PAGE_WRITE);
 }
 #endif /* CONFIG_NUMA_BALANCING */
 
@@ -506,6 +529,8 @@ static inline unsigned long pte_pfn(pte_t pte)
 /* Generic modifiers for PTE bits */
 static inline pte_t pte_wrprotect(pte_t pte)
 {
+	if (unlikely(pte_savedwrite(pte)))
+		return pte_clear_savedwrite(pte);
 	return __pte(pte_val(pte) & ~_PAGE_WRITE);
 }
 
@@ -926,6 +951,7 @@ static inline int pmd_protnone(pmd_t pmd)
 
 #define __HAVE_ARCH_PMD_WRITE
 #define pmd_write(pmd)		pte_write(pmd_pte(pmd))
+#define __pmd_write(pmd)	__pte_write(pmd_pte(pmd))
 #define pmd_savedwrite(pmd)	pte_savedwrite(pmd_pte(pmd))
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -982,11 +1008,10 @@ static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
 static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 				      pmd_t *pmdp)
 {
-
-	if ((pmd_raw(*pmdp) & cpu_to_be64(_PAGE_WRITE)) == 0)
-		return;
-
-	pmd_hugepage_update(mm, addr, pmdp, _PAGE_WRITE, 0);
+	if (__pmd_write((*pmdp)))
+		pmd_hugepage_update(mm, addr, pmdp, _PAGE_WRITE, 0);
+	else if (unlikely(pmd_savedwrite(*pmdp)))
+		pmd_hugepage_update(mm, addr, pmdp, 0, _PAGE_PRIVILEGED);
 }
 
 static inline int pmd_trans_huge(pmd_t pmd)

arch/powerpc/kvm/book3s_64_mmu_hv.c

View file

diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index f3158fb..8c68145 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -601,7 +601,7 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 							 hva, NULL, NULL);
 			if (ptep) {
 				pte = kvmppc_read_update_linux_pte(ptep, 1);
-				if (pte_write(pte))
+				if (__pte_write(pte))
 					write_ok = 1;
 			}
 			local_irq_restore(flags);

arch/powerpc/kvm/book3s_hv_rm_mmu.c

View file

diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index 6fca970..ce6f212 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -256,7 +256,7 @@ long kvmppc_do_h_enter(struct kvm *kvm, unsigned long flags,
 		}
 		pte = kvmppc_read_update_linux_pte(ptep, writing);
 		if (pte_present(pte) && !pte_protnone(pte)) {
-			if (writing && !pte_write(pte))
+			if (writing && !__pte_write(pte))
 				/* make the actual HPTE be read-only */
 				ptel = hpte_make_readonly(ptel);
 			is_ci = pte_ci(pte);

arch/sh/boards/mach-cayman/setup.c

View file

diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
index 340fd40..9c292c2 100644
--- a/arch/sh/boards/mach-cayman/setup.c
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -128,7 +128,6 @@ static int __init smsc_superio_setup(void)
 	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
 	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
 
-#ifdef CONFIG_IDE
 	/*
 	 * Only IDE1 exists on the Cayman
 	 */
@@ -158,7 +157,6 @@ static int __init smsc_superio_setup(void)
 	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
 	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
 	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
-#endif
 
 	/* Exit the configuration state */
 	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);

arch/x86/kernel/ftrace.c

View file

diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 8639bb2..8f3d9cf 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -535,7 +535,7 @@ static void run_sync(void)
 {
 	int enable_irqs = irqs_disabled();
 
-	/* We may be called with interrupts disbled (on bootup). */
+	/* We may be called with interrupts disabled (on bootup). */
 	if (enable_irqs)
 		local_irq_enable();
 	on_each_cpu(do_sync_core, NULL, 1);

arch/x86/mm/gup.c

View file

diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 99c7805..1f3b6ef 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -106,32 +106,35 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
 	struct dev_pagemap *pgmap = NULL;
-	int nr_start = *nr;
-	pte_t *ptep;
+	int nr_start = *nr, ret = 0;
+	pte_t *ptep, *ptem;
 
-	ptep = pte_offset_map(&pmd, addr);
+	/*
+	 * Keep the original mapped PTE value (ptem) around since we
+	 * might increment ptep off the end of the page when finishing
+	 * our loop iteration.
+	 */
+	ptem = ptep = pte_offset_map(&pmd, addr);
 	do {
 		pte_t pte = gup_get_pte(ptep);
 		struct page *page;
 
 		/* Similar to the PMD case, NUMA hinting must take slow path */
-		if (pte_protnone(pte)) {
-			pte_unmap(ptep);
-			return 0;
-		}
+		if (pte_protnone(pte))
+			break;
+
+		if (!pte_allows_gup(pte_val(pte), write))
+			break;
 
 		if (pte_devmap(pte)) {
 			pgmap = get_dev_pagemap(pte_pfn(pte), pgmap);
 			if (unlikely(!pgmap)) {
 				undo_dev_pagemap(nr, nr_start, pages);
-				pte_unmap(ptep);
-				return 0;
+				break;
 			}
-		} else if (!pte_allows_gup(pte_val(pte), write) ||
-			   pte_special(pte)) {
-			pte_unmap(ptep);
-			return 0;
-		}
+		} else if (pte_special(pte))
+			break;
+
 		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
 		page = pte_page(pte);
 		get_page(page);
@@ -141,9 +144,11 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
 		(*nr)++;
 
 	} while (ptep++, addr += PAGE_SIZE, addr != end);
-	pte_unmap(ptep - 1);
+	if (addr == end)
+		ret = 1;
+	pte_unmap(ptem);
 
-	return 1;
+	return ret;
 }
 
 static inline void get_head_page_multiple(struct page *page, int nr)

drivers/block/paride/pcd.c

View file

diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index 10aed84..939641d 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -50,7 +50,7 @@
                         the slower the port i/o.  In some cases, setting
                         this to zero will speed up the device. (default -1)
                         
-            major       You may use this parameter to overide the
+            major       You may use this parameter to override the
                         default major number (46) that this driver
                         will use.  Be sure to change the device
                         name as well.

drivers/block/paride/pd.c

View file

diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index 644ba08..9cfd2e0 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -61,7 +61,7 @@
                         first drive found.
 			
 
-            major       You may use this parameter to overide the
+            major       You may use this parameter to override the
                         default major number (45) that this driver
                         will use.  Be sure to change the device
                         name as well.

drivers/block/paride/pf.c

View file

diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index ed93e8b..14c5d32 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -59,7 +59,7 @@
                         the slower the port i/o.  In some cases, setting
                         this to zero will speed up the device. (default -1)
 
-	    major	You may use this parameter to overide the
+	    major	You may use this parameter to override the
 			default major number (47) that this driver
 			will use.  Be sure to change the device
 			name as well.

drivers/block/paride/pg.c

View file

diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index 5db955f..3b5882b 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -84,7 +84,7 @@
 			the slower the port i/o.  In some cases, setting
 			this to zero will speed up the device. (default -1)
 
-	    major	You may use this parameter to overide the
+	    major	You may use this parameter to override the
 			default major number (97) that this driver
 			will use.  Be sure to change the device
 			name as well.

drivers/block/paride/pt.c

View file

diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
index 61fc682..e815312 100644
--- a/drivers/block/paride/pt.c
+++ b/drivers/block/paride/pt.c
@@ -61,7 +61,7 @@
                         the slower the port i/o.  In some cases, setting
                         this to zero will speed up the device. (default -1)
 
-	    major	You may use this parameter to overide the
+	    major	You may use this parameter to override the
 			default major number (96) that this driver
 			will use.  Be sure to change the device
 			name as well.

drivers/crypto/ux500/cryp/cryp.c

View file

diff --git a/drivers/crypto/ux500/cryp/cryp.c b/drivers/crypto/ux500/cryp/cryp.c
index 43a0c8a..00a16ab 100644
--- a/drivers/crypto/ux500/cryp/cryp.c
+++ b/drivers/crypto/ux500/cryp/cryp.c
@@ -82,7 +82,7 @@ void cryp_activity(struct cryp_device_data *device_data,
 void cryp_flush_inoutfifo(struct cryp_device_data *device_data)
 {
 	/*
-	 * We always need to disble the hardware before trying to flush the
+	 * We always need to disable the hardware before trying to flush the
 	 * FIFO. This is something that isn't written in the design
 	 * specification, but we have been informed by the hardware designers
 	 * that this must be done.

drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c

View file

diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
index 31375bd..011800f 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
@@ -788,7 +788,7 @@ static int sdma_v3_0_start(struct amdgpu_device *adev)
 		}
 	}
 
-	/* disble sdma engine before programing it */
+	/* disable sdma engine before programing it */
 	sdma_v3_0_ctx_switch_enable(adev, false);
 	sdma_v3_0_enable(adev, false);
 

drivers/hv/channel.c

View file

diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 81a80c8..bd0d198 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -543,7 +543,7 @@ static int vmbus_close_internal(struct vmbus_channel *channel)
 	/*
 	 * In case a device driver's probe() fails (e.g.,
 	 * util_probe() -> vmbus_open() returns -ENOMEM) and the device is
-	 * rescinded later (e.g., we dynamically disble an Integrated Service
+	 * rescinded later (e.g., we dynamically disable an Integrated Service
 	 * in Hyper-V Manager), the driver's remove() invokes vmbus_close():
 	 * here we should skip most of the below cleanup work.
 	 */

drivers/isdn/hisax/st5481_b.c

View file

diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
index 4098491..f64a360 100644
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -239,7 +239,7 @@ static void st5481B_mode(struct st5481_bcs *bcs, int mode)
 			}
 		}
 	} else {
-		// Disble B channel interrupts
+		// Disable B channel interrupts
 		st5481_usb_device_ctrl_msg(adapter, FFMSK_B1+(bcs->channel * 2), 0, NULL, NULL);
 
 		// Disable B channel FIFOs

drivers/md/bcache/util.h

View file

diff --git a/drivers/md/bcache/util.h b/drivers/md/bcache/util.h
index a126919..5d13930 100644
--- a/drivers/md/bcache/util.h
+++ b/drivers/md/bcache/util.h
@@ -4,7 +4,6 @@
 
 #include <linux/blkdev.h>
 #include <linux/errno.h>
-#include <linux/blkdev.h>
 #include <linux/kernel.h>
 #include <linux/sched/clock.h>
 #include <linux/llist.h>

drivers/media/dvb-frontends/drx39xyj/drx_driver.h

View file

diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
index 7a681d8..4442e47 100644
--- a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
+++ b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
@@ -256,8 +256,7 @@ int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner,
 *
 * The actual DAP implementation may be restricted to only one of the modes.
 * A compiler warning or error will be generated if the DAP implementation
-* overides or cannot handle the mode defined below.
-*
+* overrides or cannot handle the mode defined below.
 */
 #ifndef DRXDAP_SINGLE_MASTER
 #define DRXDAP_SINGLE_MASTER 1
@@ -272,7 +271,7 @@ int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner,
 *
 * This maximum size may be restricted by the actual DAP implementation.
 * A compiler warning or error will be generated if the DAP implementation
-* overides or cannot handle the chunksize defined below.
+* overrides or cannot handle the chunksize defined below.
 *
 * Beware that the DAP uses  DRXDAP_MAX_WCHUNKSIZE to create a temporary data
 * buffer. Do not undefine or choose too large, unless your system is able to
@@ -292,8 +291,7 @@ int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner,
 *
 * This maximum size may be restricted by the actual DAP implementation.
 * A compiler warning or error will be generated if the DAP implementation
-* overides or cannot handle the chunksize defined below.
-*
+* overrides or cannot handle the chunksize defined below.
 */
 #ifndef DRXDAP_MAX_RCHUNKSIZE
 #define  DRXDAP_MAX_RCHUNKSIZE 60

drivers/mtd/spi-nor/spi-nor.c

View file

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 1ae872b..747645c 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -186,7 +186,7 @@ static inline int write_enable(struct spi_nor *nor)
 }
 
 /*
- * Send write disble instruction to the chip.
+ * Send write disable instruction to the chip.
  */
 static inline int write_disable(struct spi_nor *nor)
 {

drivers/net/ethernet/qlogic/qlge/qlge.h

View file

diff --git a/drivers/net/ethernet/qlogic/qlge/qlge.h b/drivers/net/ethernet/qlogic/qlge/qlge.h
index 6d31f92..84ac50f 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge.h
+++ b/drivers/net/ethernet/qlogic/qlge/qlge.h
@@ -1162,8 +1162,8 @@ struct ob_mac_tso_iocb_rsp {
 struct ib_mac_iocb_rsp {
 	u8 opcode;		/* 0x20 */
 	u8 flags1;
-#define IB_MAC_IOCB_RSP_OI	0x01	/* Overide intr delay */
-#define IB_MAC_IOCB_RSP_I	0x02	/* Disble Intr Generation */
+#define IB_MAC_IOCB_RSP_OI	0x01	/* Override intr delay */
+#define IB_MAC_IOCB_RSP_I	0x02	/* Disable Intr Generation */
 #define IB_MAC_CSUM_ERR_MASK 0x1c	/* A mask to use for csum errs */
 #define IB_MAC_IOCB_RSP_TE	0x04	/* Checksum error */
 #define IB_MAC_IOCB_RSP_NU	0x08	/* No checksum rcvd */

drivers/scsi/aic7xxx/aic79xx_core.c

View file

diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 109e2c9..95d8f25 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -6278,7 +6278,7 @@ ahd_reset(struct ahd_softc *ahd, int reinit)
 		 * does not disable its parity logic prior to
 		 * the start of the reset.  This may cause a
 		 * parity error to be detected and thus a
-		 * spurious SERR or PERR assertion.  Disble
+		 * spurious SERR or PERR assertion.  Disable
 		 * PERR and SERR responses during the CHIPRST.
 		 */
 		mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN);

drivers/usb/gadget/legacy/inode.c

View file

diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index a2615d6..79a2d8f 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -84,8 +84,7 @@ static int ep_open(struct inode *, struct file *);
 
 /* /dev/gadget/$CHIP represents ep0 and the whole device */
 enum ep0_state {
-	/* DISBLED is the initial state.
-	 */
+	/* DISABLED is the initial state. */
 	STATE_DEV_DISABLED = 0,
 
 	/* Only one open() of /dev/gadget/$CHIP; only one file tracks

drivers/usb/host/xhci.c

View file

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6d6c460..50aee8b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -868,7 +868,7 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
 
 	spin_lock_irqsave(&xhci->lock, flags);
 
-	/* disble usb3 ports Wake bits*/
+	/* disable usb3 ports Wake bits */
 	port_index = xhci->num_usb3_ports;
 	port_array = xhci->usb3_ports;
 	while (port_index--) {
@@ -879,7 +879,7 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
 			writel(t2, port_array[port_index]);
 	}
 
-	/* disble usb2 ports Wake bits*/
+	/* disable usb2 ports Wake bits */
 	port_index = xhci->num_usb2_ports;
 	port_array = xhci->usb2_ports;
 	while (port_index--) {

fs/fat/inode.c

View file

diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 338d2f7..a2c05f2 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -1359,6 +1359,16 @@ out:
 	return 0;
 }
 
+static void fat_dummy_inode_init(struct inode *inode)
+{
+	/* Initialize this dummy inode to work as no-op. */
+	MSDOS_I(inode)->mmu_private = 0;
+	MSDOS_I(inode)->i_start = 0;
+	MSDOS_I(inode)->i_logstart = 0;
+	MSDOS_I(inode)->i_attrs = 0;
+	MSDOS_I(inode)->i_pos = 0;
+}
+
 static int fat_read_root(struct inode *inode)
 {
 	struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
@@ -1803,12 +1813,13 @@ int fat_fill_super(struct super_block *sb, void *data, int silent, int isvfat,
 	fat_inode = new_inode(sb);
 	if (!fat_inode)
 		goto out_fail;
-	MSDOS_I(fat_inode)->i_pos = 0;
+	fat_dummy_inode_init(fat_inode);
 	sbi->fat_inode = fat_inode;
 
 	fsinfo_inode = new_inode(sb);
 	if (!fsinfo_inode)
 		goto out_fail;
+	fat_dummy_inode_init(fsinfo_inode);
 	fsinfo_inode->i_ino = MSDOS_FSINFO_INO;
 	sbi->fsinfo_inode = fsinfo_inode;
 	insert_inode_hash(fsinfo_inode);