Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Merge commit. Changes below are compared with the first parent: fb7b096d.
Changes
36 files changed · +978 −652
Only the first 600 diff lines are shown. Download the complete patch.
drivers/char/cyclades.c
View filediff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 4254457..b861c08 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -158,13 +158,11 @@ static unsigned int cy_isa_addresses[] = {
#define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses)
-#ifdef MODULE
static long maddr[NR_CARDS];
static int irq[NR_CARDS];
module_param_array(maddr, long, NULL, 0);
module_param_array(irq, int, NULL, 0);
-#endif
#endif /* CONFIG_ISA */
@@ -598,12 +596,6 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
save_car = readb(base_addr + (CyCAR << index));
cy_writeb(base_addr + (CyCAR << index), save_xir);
- /* validate the port# (as configured and open) */
- if (channel + chip * 4 >= cinfo->nports) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) & ~CyTxRdy);
- goto end;
- }
info = &cinfo->ports[channel + chip * 4];
tty = tty_port_tty_get(&info->port);
if (tty == NULL) {
@@ -3316,13 +3308,10 @@ static int __init cy_detect_isa(void)
unsigned short cy_isa_irq, nboard;
void __iomem *cy_isa_address;
unsigned short i, j, cy_isa_nchan;
-#ifdef MODULE
int isparam = 0;
-#endif
nboard = 0;
-#ifdef MODULE
/* Check for module parameters */
for (i = 0; i < NR_CARDS; i++) {
if (maddr[i] || i) {
@@ -3332,7 +3321,6 @@ static int __init cy_detect_isa(void)
if (!maddr[i])
break;
}
-#endif
/* scan the address table probing for Cyclom-Y/ISA boards */
for (i = 0; i < NR_ISA_ADDRS; i++) {
@@ -3353,11 +3341,10 @@ static int __init cy_detect_isa(void)
iounmap(cy_isa_address);
continue;
}
-#ifdef MODULE
+
if (isparam && i < NR_CARDS && irq[i])
cy_isa_irq = irq[i];
else
-#endif
/* find out the board's irq by probing */
cy_isa_irq = detect_isa_irq(cy_isa_address);
if (cy_isa_irq == 0) {
@@ -4208,3 +4195,4 @@ module_exit(cy_cleanup_module);
MODULE_LICENSE("GPL");
MODULE_VERSION(CY_VERSION);
MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR);
+MODULE_FIRMWARE("cyzfirm.bin");
drivers/char/hvc_console.c
View filediff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 4c3b59b..465185f 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -146,7 +146,7 @@ static void hvc_console_print(struct console *co, const char *b,
return;
/* This console adapter was removed so it is not usable. */
- if (vtermnos[index] < 0)
+ if (vtermnos[index] == -1)
return;
while (count > 0 || i > 0) {
drivers/char/ip2/ip2main.c
View filediff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 517271c..911e1da 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -208,6 +208,7 @@ static int DumpFifoBuffer( char __user *, int);
static void ip2_init_board(int, const struct firmware *);
static unsigned short find_eisa_board(int);
+static int ip2_setup(char *str);
/***************/
/* Static Data */
@@ -263,7 +264,7 @@ static int tracewrap;
/* Macros */
/**********/
-#if defined(MODULE) && defined(IP2DEBUG_OPEN)
+#ifdef IP2DEBUG_OPEN
#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \
tty->name,(pCh->flags), \
tty->count,/*GET_USE_COUNT(module)*/0,s)
@@ -285,7 +286,10 @@ MODULE_AUTHOR("Doug McNash");
MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
MODULE_LICENSE("GPL");
+#define MAX_CMD_STR 50
+
static int poll_only;
+static char cmd[MAX_CMD_STR];
static int Eisa_irq;
static int Eisa_slot;
@@ -309,6 +313,8 @@ module_param_array(io, int, NULL, 0);
MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards");
module_param(poll_only, bool, 0);
MODULE_PARM_DESC(poll_only, "Do not use card interrupts");
+module_param_string(ip2, cmd, MAX_CMD_STR, 0);
+MODULE_PARM_DESC(ip2, "Contains module parameter passed with 'ip2='");
/* for sysfs class support */
static struct class *ip2_class;
@@ -487,7 +493,6 @@ static const struct firmware *ip2_request_firmware(void)
return fw;
}
-#ifndef MODULE
/******************************************************************************
* ip2_setup:
* str: kernel command line string
@@ -531,7 +536,6 @@ static int __init ip2_setup(char *str)
return 1;
}
__setup("ip2=", ip2_setup);
-#endif /* !MODULE */
static int __init ip2_loadmain(void)
{
@@ -539,14 +543,20 @@ static int __init ip2_loadmain(void)
int err = 0;
i2eBordStrPtr pB = NULL;
int rc = -1;
- struct pci_dev *pdev = NULL;
const struct firmware *fw = NULL;
+ char *str;
+
+ str = cmd;
if (poll_only) {
/* Hard lock the interrupts to zero */
irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0;
}
+ /* Check module parameter with 'ip2=' has been passed or not */
+ if (!poll_only && (!strncmp(str, "ip2=", 4)))
+ ip2_setup(str);
+
ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0);
/* process command line arguments to modprobe or
@@ -612,6 +622,7 @@ static int __init ip2_loadmain(void)
case PCI:
#ifdef CONFIG_PCI
{
+ struct pci_dev *pdev = NULL;
u32 addr;
int status;
@@ -626,7 +637,7 @@ static int __init ip2_loadmain(void)
if (pci_enable_device(pdev)) {
dev_err(&pdev->dev, "can't enable device\n");
- break;
+ goto out;
}
ip2config.type[i] = PCI;
ip2config.pci_dev[i] = pci_dev_get(pdev);
@@ -638,6 +649,8 @@ static int __init ip2_loadmain(void)
dev_err(&pdev->dev, "I/O address error\n");
ip2config.irq[i] = pdev->irq;
+out:
+ pci_dev_put(pdev);
}
#else
printk(KERN_ERR "IP2: PCI card specified but PCI "
@@ -656,7 +669,6 @@ static int __init ip2_loadmain(void)
break;
} /* switch */
} /* for */
- pci_dev_put(pdev);
for (i = 0; i < IP2_MAX_BOARDS; ++i) {
if (ip2config.addr[i]) {
@@ -3197,3 +3209,5 @@ static struct pci_device_id ip2main_pci_tbl[] __devinitdata = {
};
MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl);
+
+MODULE_FIRMWARE("intelliport2.bin");
drivers/char/isicom.c
View filediff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 300d5bd..be2e8f9 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -113,6 +113,8 @@
* 64-bit verification
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
@@ -140,7 +142,6 @@
#define InterruptTheCard(base) outw(0, (base) + 0xc)
#define ClearInterrupt(base) inw((base) + 0x0a)
-#define pr_dbg(str...) pr_debug("ISICOM: " str)
#ifdef DEBUG
#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
#else
@@ -249,8 +250,7 @@ static int lock_card(struct isi_board *card)
spin_unlock_irqrestore(&card->card_lock, card->flags);
msleep(10);
}
- printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n",
- card->base);
+ pr_warning("Failed to lock Card (0x%lx)\n", card->base);
return 0; /* Failed to acquire the card! */
}
@@ -379,13 +379,13 @@ static inline int __isicom_paranoia_check(struct isi_port const *port,
char *name, const char *routine)
{
if (!port) {
- printk(KERN_WARNING "ISICOM: Warning: bad isicom magic for "
- "dev %s in %s.\n", name, routine);
+ pr_warning("Warning: bad isicom magic for dev %s in %s.\n",
+ name, routine);
return 1;
}
if (port->magic != ISICOM_MAGIC) {
- printk(KERN_WARNING "ISICOM: Warning: NULL isicom port for "
- "dev %s in %s.\n", name, routine);
+ pr_warning("Warning: NULL isicom port for dev %s in %s.\n",
+ name, routine);
return 1;
}
@@ -450,8 +450,8 @@ static void isicom_tx(unsigned long _data)
if (!(inw(base + 0x02) & (1 << port->channel)))
continue;
- pr_dbg("txing %d bytes, port%d.\n", txcount,
- port->channel + 1);
+ pr_debug("txing %d bytes, port%d.\n",
+ txcount, port->channel + 1);
outw((port->channel << isi_card[card].shift_count) | txcount,
base);
residue = NO;
@@ -547,8 +547,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
byte_count = header & 0xff;
if (channel + 1 > card->port_count) {
- printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
- "%d(channel) > port_count.\n", base, channel+1);
+ pr_warning("%s(0x%lx): %d(channel) > port_count.\n",
+ __func__, base, channel+1);
outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
@@ -582,14 +582,15 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
if (port->status & ISI_DCD) {
if (!(header & ISI_DCD)) {
/* Carrier has been lost */
- pr_dbg("interrupt: DCD->low.\n"
- );
+ pr_debug("%s: DCD->low.\n",
+ __func__);
port->status &= ~ISI_DCD;
tty_hangup(tty);
}
} else if (header & ISI_DCD) {
/* Carrier has been detected */
- pr_dbg("interrupt: DCD->high.\n");
+ pr_debug("%s: DCD->high.\n",
+ __func__);
port->status |= ISI_DCD;
wake_up_interruptible(&port->port.open_wait);
}
@@ -641,17 +642,19 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
break;
case 2: /* Statistics */
- pr_dbg("isicom_interrupt: stats!!!.\n");
+ pr_debug("%s: stats!!!\n", __func__);
break;
default:
- pr_dbg("Intr: Unknown code in status packet.\n");
+ pr_debug("%s: Unknown code in status packet.\n",
+ __func__);
break;
}
} else { /* Data Packet */
count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
- pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count);
+ pr_debug("%s: Can rx %d of %d bytes.\n",
+ __func__, count, byte_count);
word_count = count >> 1;
insw(base, rp, word_count);
byte_count -= (word_count << 1);
@@ -661,8 +664,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
byte_count -= 2;
}
if (byte_count > 0) {
- pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping "
- "bytes...\n", base, channel + 1);
+ pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n",
+ __func__, base, channel + 1);
/* drain out unread xtra data */
while (byte_count > 0) {
inw(base);
@@ -888,8 +891,8 @@ static void isicom_shutdown_port(struct isi_port *port)
struct isi_board *card = port->card;
if (--card->count < 0) {
- pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n",
- card->base, card->count);
+ pr_debug("%s: bad board(0x%lx) count %d.\n",
+ __func__, card->base, card->count);
card->count = 0;
}
/* last port was closed, shutdown that board too */
@@ -1681,13 +1684,13 @@ static int __init isicom_init(void)
retval = tty_register_driver(isicom_normal);
if (retval) {
- pr_dbg("Couldn't register the dialin driver\n");
+ pr_debug("Couldn't register the dialin driver\n");
goto err_puttty;
}
retval = pci_register_driver(&isicom_driver);
if (retval < 0) {
- printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
+ pr_err("Unable to register pci driver.\n");
goto err_unrtty;
}
@@ -1717,3 +1720,8 @@ module_exit(isicom_exit);
MODULE_AUTHOR("MultiTech");
MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("isi608.bin");
+MODULE_FIRMWARE("isi608em.bin");
+MODULE_FIRMWARE("isi616em.bin");
+MODULE_FIRMWARE("isi4608.bin");
+MODULE_FIRMWARE("isi4616.bin");
drivers/char/moxa.c
View filediff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 63ee3bb..166495d 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -164,24 +164,25 @@ static unsigned int moxaFuncTout = HZ / 2;
static unsigned int moxaLowWaterChk;
static DEFINE_MUTEX(moxa_openlock);
static DEFINE_SPINLOCK(moxa_lock);
-/* Variables for insmod */
-#ifdef MODULE
+
static unsigned long baseaddr[MAX_BOARDS];
static unsigned int type[MAX_BOARDS];
static unsigned int numports[MAX_BOARDS];
-#endif
MODULE_AUTHOR("William Chen");
MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
MODULE_LICENSE("GPL");
-#ifdef MODULE
+MODULE_FIRMWARE("c218tunx.cod");
+MODULE_FIRMWARE("cp204unx.cod");
+MODULE_FIRMWARE("c320tunx.cod");
+
module_param_array(type, uint, NULL, 0);
MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
module_param_array(baseaddr, ulong, NULL, 0);
MODULE_PARM_DESC(baseaddr, "base address");
module_param_array(numports, uint, NULL, 0);
MODULE_PARM_DESC(numports, "numports (ignored for C218)");
-#endif
+
module_param(ttymajor, int, 0);
/*
@@ -1024,6 +1025,8 @@ static int __init moxa_init(void)
{
unsigned int isabrds = 0;
int retval = 0;
+ struct moxa_board_conf *brd = moxa_boards;
+ unsigned int i;
printk(KERN_INFO "MOXA Intellio family driver version %s\n",
MOXA_VERSION);
@@ -1051,10 +1054,7 @@ static int __init moxa_init(void)
}
/* Find the boards defined from module args. */
-#ifdef MODULE
- {
- struct moxa_board_conf *brd = moxa_boards;
- unsigned int i;
+
for (i = 0; i < MAX_BOARDS; i++) {
if (!baseaddr[i])
break;
@@ -1087,8 +1087,6 @@ static int __init moxa_init(void)
isabrds++;
}
}
- }
-#endif
#ifdef CONFIG_PCI
retval = pci_register_driver(&moxa_pci_driver);
drivers/char/mxser.c
View filediff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 3d92306..e0c5d2a 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -895,8 +895,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
if (inb(info->ioaddr + UART_LSR) == 0xff) {
spin_unlock_irqrestore(&info->slock, flags);
if (capable(CAP_SYS_ADMIN)) {
- if (tty)
- set_bit(TTY_IO_ERROR, &tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
return 0;
} else
return -ENODEV;
drivers/char/nozomi.c
View filediff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 2ad7d37..a3f32a1 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -136,10 +136,6 @@ static int debug;
#define RECEIVE_BUF_MAX 4
-/* Define all types of vendors and devices to support */
-#define VENDOR1 0x1931 /* Vendor Option */
-#define DEVICE1 0x000c /* HSDPA card */
-
#define R_IIR 0x0000 /* Interrupt Identity Register */
#define R_FCR 0x0000 /* Flow Control Register */
#define R_IER 0x0004 /* Interrupt Enable Register */
@@ -371,6 +367,8 @@ struct port {
struct mutex tty_sem;
wait_queue_head_t tty_wait;
struct async_icount tty_icount;
+
+ struct nozomi *dc;
};
/* Private data one for each card in the system */
@@ -405,7 +403,7 @@ struct buffer {
/* Global variables */
static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = {
- {PCI_DEVICE(VENDOR1, DEVICE1)},
+ {PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */
{},
};
@@ -414,6 +412,8 @@ MODULE_DEVICE_TABLE(pci, nozomi_pci_tbl);
static struct nozomi *ndevs[NOZOMI_MAX_CARDS];
static struct tty_driver *ntty_driver;
+static const struct tty_port_operations noz_tty_port_ops;
+
/*
* find card by tty_index
*/
@@ -853,8 +853,6 @@ static int receive_data(enum port_type index, struct nozomi *dc)
goto put;
}
- tty_buffer_request_room(tty, size);
-
while (size > 0) {
read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX);
@@ -1473,9 +1471,11 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
for (i = 0; i < MAX_PORT; i++) {
struct device *tty_dev;
-
- mutex_init(&dc->port[i].tty_sem);
- tty_port_init(&dc->port[i].port);
+ struct port *port = &dc->port[i];
+ port->dc = dc;
+ mutex_init(&port->tty_sem);
+ tty_port_init(&port->port);
+ port->port.ops = &noz_tty_port_ops;
tty_dev = tty_register_device(ntty_driver, dc->index_start + i,
&pdev->dev);
@@ -1600,67 +1600,74 @@ static void set_dtr(const struct tty_struct *tty, int dtr)
* ----------------------------------------------------------------------------
*/
-/* Called when the userspace process opens the tty, /dev/noz*. */
-static int ntty_open(struct tty_struct *tty, struct file *file)
+static int ntty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct port *port = get_port_by_tty(tty);
struct nozomi *dc = get_dc_by_tty(tty);
- unsigned long flags;
-
+ int ret;
if (!port || !dc || dc->state != NOZOMI_STATE_READY)
return -ENODEV;
-
- if (mutex_lock_interruptible(&port->tty_sem))
- return -ERESTARTSYS;
-
- port->port.count++;
- dc->open_ttys++;
-
- /* Enable interrupt downlink for channel */
- if (port->port.count == 1) {
- tty->driver_data = port;
- tty_port_tty_set(&port->port, tty);
- DBG1("open: %d", port->token_dl);
- spin_lock_irqsave(&dc->spin_mutex, flags);
- dc->last_ier = dc->last_ier | port->token_dl;
- writew(dc->last_ier, dc->reg_ier);
- spin_unlock_irqrestore(&dc->spin_mutex, flags);
+ ret = tty_init_termios(tty);
+ if (ret == 0) {
+ tty_driver_kref_get(driver);
+ driver->ttys[tty->index] = tty;
}
- mutex_unlock(&port->tty_sem);
- return 0;
+ return ret;
}
-/* Called when the userspace process close the tty, /dev/noz*. Also
- called immediately if ntty_open fails in which case tty->driver_data
- will be NULL an we exit by the first return */
+static void ntty_cleanup(struct tty_struct *tty)
+{
+ tty->driver_data = NULL;
+}
-static void ntty_close(struct tty_struct *tty, struct file *file)
+static int ntty_activate(struct tty_port *tport, struct tty_struct *tty)
{
- struct nozomi *dc = get_dc_by_tty(tty);
- struct port *nport = tty->driver_data;
- struct tty_port *port = &nport->port;
+ struct port *port = container_of(tport, struct port, port);
+ struct nozomi *dc = port->dc;
unsigned long flags;
- if (!dc || !nport)
- return;
+ DBG1("open: %d", port->token_dl);
+ spin_lock_irqsave(&dc->spin_mutex, flags);
+ dc->last_ier = dc->last_ier | port->token_dl;
+ writew(dc->last_ier, dc->reg_ier);
+ dc->open_ttys++;
+ spin_unlock_irqrestore(&dc->spin_mutex, flags);
+ printk("noz: activated %d: %p\n", tty->index, tport);
+ return 0;
+}
- /* Users cannot interrupt a close */
- mutex_lock(&nport->tty_sem);
+static int ntty_open(struct tty_struct *tty, struct file *filp)
+{
+ struct port *port = get_port_by_tty(tty);
+ return tty_port_open(&port->port, tty, filp);
+}
- WARN_ON(!port->count);
+static void ntty_shutdown(struct tty_port *tport)
+{
+ struct port *port = container_of(tport, struct port, port);
+ struct nozomi *dc = port->dc;
+ unsigned long flags;
+ DBG1("close: %d", port->token_dl);
+ spin_lock_irqsave(&dc->spin_mutex, flags);
+ dc->last_ier &= ~(port->token_dl);
+ writew(dc->last_ier, dc->reg_ier);
dc->open_ttys--;
- port->count--;
This diff is incomplete. Download the complete patch.
drivers/char/serial167.c
View fileThis diff is incomplete. Download the complete patch.
drivers/char/specialix.c
View fileThis diff is incomplete. Download the complete patch.
drivers/char/synclink.c
View fileThis diff is incomplete. Download the complete patch.
drivers/char/synclink_gt.c
View fileThis diff is incomplete. Download the complete patch.
drivers/char/tty_buffer.c
View fileThis diff is incomplete. Download the complete patch.
drivers/char/tty_ldisc.c
View fileThis diff is incomplete. Download the complete patch.
drivers/char/vt_ioctl.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/card/sdio_uart.c
View fileThis diff is incomplete. Download the complete patch.
drivers/parport/parport_pc.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/68328serial.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/8250.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/8250_pci.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/Kconfig
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/atmel_serial.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/bcm63xx_uart.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/bfin_5xx.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/bfin_sport_uart.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/bfin_sport_uart.h
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/icom.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/imx.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/ioc3_serial.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/jsm/jsm_driver.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/jsm/jsm_tty.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/msm_serial.c
View fileThis diff is incomplete. Download the complete patch.
drivers/serial/timbuart.c
View fileThis diff is incomplete. Download the complete patch.
drivers/usb/serial/keyspan_pda.c
View fileThis diff is incomplete. Download the complete patch.
include/linux/pci_ids.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/tty.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/vt.h
View fileThis diff is incomplete. Download the complete patch.