Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

999dcbe2 · Linus Torvalds <[email protected]> · 2016-10-03 19:10:15 -07:00

Pull irq updates from Thomas Gleixner:
 "The irq departement proudly presents:

   - A rework of the core infrastructure to optimally spread interrupt
     for multiqueue devices. The first version was a bit naive and
     failed to take thread siblings and other details into account.
     Developed in cooperation with Christoph and Keith.

   - Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is
     active then no further softirq processsing on interrupt return
     happens. Otherwise we try to delegate and still run another batch
     of network packets in the irq return path, which then tries to
     delegate to ksoftirqd .....

   - A proper machine parseable sysfs based alternative for
     /proc/interrupts.

   - ACPI support for the GICV3-ITS and ARM interrupt remapping

   - Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC

   - A new irq chip for the JCore (SuperH)

   - The usual pile of small fixlets in core and irqchip drivers"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  softirq: Let ksoftirqd do its job
  genirq: Make function __irq_do_set_handler() static
  ARM/dts: Add EXTI controller node to stm32f429
  ARM/STM32: Select external interrupts controller
  drivers/irqchip: Add STM32 external interrupts support
  Documentation/dt-bindings: Document STM32 EXTI controller bindings
  irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs
  pci/msi: Retrieve affinity for a vector
  genirq/affinity: Remove old irq spread infrastructure
  genirq/msi: Switch to new irq spreading infrastructure
  genirq/affinity: Provide smarter irq spreading infrastructure
  genirq/msi: Add cpumask allocation to alloc_msi_entry
  genirq: Expose interrupt information through sysfs
  irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization
  irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI
  irqchip/gicv3-its: Probe ITS in the ACPI way
  irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI
  irqchip/gicv3-its: Cleanup for ITS domain initialization
  PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table
  ACPI: Add new IORT functions to support MSI domain handling
  ...

Commit: 999dcbe2414e15e19cdc1f91497d01f262c6e1cf
Parents: 5e1b834b · 4cd13c21

Merge commit. Changes below are compared with the first parent: 5e1b834b.

Changes

46 files changed · +1924 −281

File	Status	Add	Del	Content
Documentation/ABI/testing/sysfs-kernel-irq	added	+53	−0	View file
Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt	added	+26	−0	View file
Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt	added	+25	−0	View file
Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt	modified	+1	−1	View file
Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt	added	+20	−0	View file
arch/arm/Kconfig	modified	+1	−0	View file
arch/arm/boot/dts/stm32f429.dtsi	modified	+8	−0	View file
arch/arm/include/asm/arch_gicv3.h	modified	+6	−0	View file
arch/arm64/Kconfig.platforms	modified	+1	−0	View file
arch/arm64/include/asm/arch_gicv3.h	modified	+6	−0	View file
drivers/acpi/Kconfig	modified	+4	−0	View file
drivers/acpi/Makefile	modified	+2	−0	View file
drivers/acpi/arm64/Kconfig	added	+6	−0	View file
drivers/acpi/arm64/Makefile	added	+1	−0	View file
drivers/acpi/arm64/iort.c	added	+368	−0	View file
drivers/acpi/bus.c	modified	+2	−0	View file
drivers/base/platform-msi.c	modified	+1	−2	View file
drivers/irqchip/Kconfig	modified	+15	−0	View file
drivers/irqchip/Makefile	modified	+3	−0	View file
drivers/irqchip/irq-gic-pm.c	modified	+5	−18	View file
drivers/irqchip/irq-gic-v3-its-pci-msi.c	modified	+73	−15	View file
drivers/irqchip/irq-gic-v3-its.c	modified	+126	−45	View file
drivers/irqchip/irq-gic-v3.c	modified	+10	−5	View file
drivers/irqchip/irq-gic.c	modified	+28	−10	View file
drivers/irqchip/irq-jcore-aic.c	added	+95	−0	View file
drivers/irqchip/irq-keystone.c	modified	+1	−1	View file
drivers/irqchip/irq-mips-gic.c	modified	+2	−12	View file
drivers/irqchip/irq-mvebu-pic.c	added	+197	−0	View file
drivers/irqchip/irq-stm32-exti.c	added	+201	−0	View file
drivers/pci/msi.c	modified	+111	−61	View file
drivers/staging/fsl-mc/bus/mc-msi.c	modified	+1	−2	View file
include/linux/acpi_iort.h	added	+42	−0	View file
include/linux/interrupt.h	modified	+11	−3	View file
include/linux/irq.h	modified	+13	−5	View file
include/linux/irqchip/arm-gic-v3.h	modified	+2	−2	View file
include/linux/irqdesc.h	modified	+3	−0	View file
include/linux/msi.h	modified	+3	−2	View file
include/linux/pci.h	modified	+6	−0	View file
kernel/irq/affinity.c	modified	+129	−38	View file
kernel/irq/chip.c	modified	+15	−6	View file
kernel/irq/generic-chip.c	modified	+48	−24	View file
kernel/irq/irqdesc.c	modified	+206	−18	View file
kernel/irq/irqdomain.c	modified	+6	−5	View file
kernel/irq/manage.c	modified	+2	−3	View file
kernel/irq/msi.c	modified	+24	−2	View file
kernel/softirq.c	modified	+15	−1	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/ABI/testing/sysfs-kernel-irq

View file

diff --git a/Documentation/ABI/testing/sysfs-kernel-irq b/Documentation/ABI/testing/sysfs-kernel-irq
new file mode 100644
index 0000000..eb074b1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-irq
@@ -0,0 +1,53 @@
+What:		/sys/kernel/irq
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <[email protected]>
+Description:	Directory containing information about the system's IRQs.
+		Specifically, data from the associated struct irq_desc.
+		The information here is similar to that in /proc/interrupts
+		but in a more machine-friendly format.  This directory contains
+		one subdirectory for each Linux IRQ number.
+
+What:		/sys/kernel/irq/<irq>/actions
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <[email protected]>
+Description:	The IRQ action chain.  A comma-separated list of zero or more
+		device names associated with this interrupt.
+
+What:		/sys/kernel/irq/<irq>/chip_name
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <[email protected]>
+Description:	Human-readable chip name supplied by the associated device
+		driver.
+
+What:		/sys/kernel/irq/<irq>/hwirq
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <[email protected]>
+Description:	When interrupt translation domains are used, this file contains
+		the underlying hardware IRQ number used for this Linux IRQ.
+
+What:		/sys/kernel/irq/<irq>/name
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <[email protected]>
+Description:	Human-readable flow handler name as defined by the irq chip
+		driver.
+
+What:		/sys/kernel/irq/<irq>/per_cpu_count
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <[email protected]>
+Description:	The number of times the interrupt has fired since boot.  This
+		is a comma-separated list of counters; one per CPU in CPU id
+		order.  NOTE: This file consistently shows counters for all
+		CPU ids.  This differs from the behavior of /proc/interrupts
+		which only shows counters for online CPUs.
+
+What:		/sys/kernel/irq/<irq>/type
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	Craig Gallek <[email protected]>
+Description:	The type of the interrupt.  Either the string 'level' or 'edge'.

Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
new file mode 100644
index 0000000..ee2ad36
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
@@ -0,0 +1,26 @@
+J-Core Advanced Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic
+  with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
+  the "aic2" core with 64 interrupts.
+
+- reg: Memory region(s) for configuration. For SMP, there should be one
+  region per cpu, indexed by the sequential, zero-based hardware cpu
+  number.
+
+- interrupt-controller: Identifies the node as an interrupt controller
+
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+
+Example:
+
+aic: interrupt-controller@200 {
+	compatible = "jcore,aic2";
+	reg = < 0x200 0x30 0x500 0x30 >;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};

Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt
new file mode 100644
index 0000000..86a7b4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt
@@ -0,0 +1,25 @@
+Marvell Armada 7K/8K PIC Interrupt controller
+---------------------------------------------
+
+This is the Device Tree binding for the PIC, a secondary interrupt
+controller available on the Marvell Armada 7K/8K ARM64 SoCs, and
+typically connected to the GIC as the primary interrupt controller.
+
+Required properties:
+- compatible: should be "marvell,armada-8k-pic"
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: the number of cells to define interrupts on this
+  controller. Should be 1
+- reg: the register area for the PIC interrupt controller
+- interrupts: the interrupt to the primary interrupt controller,
+  typically the GIC
+
+Example:
+
+	pic: interrupt-controller@3f0100 {
+		compatible = "marvell,armada-8k-pic";
+		reg = <0x3f0100 0x10>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};

Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
index 8af0a8e..3f6442c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
@@ -31,7 +31,7 @@ Required properties:
 Example:
 
 	odmi: odmi@300000 {
-		compatible = "marvell,ap806-odm-controller",
+		compatible = "marvell,ap806-odmi-controller",
 			     "marvell,odmi-controller";
 		interrupt-controller;
 		msi-controller;

Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
new file mode 100644
index 0000000..6e7703d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
@@ -0,0 +1,20 @@
+STM32 External Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "st,stm32-exti"
+- reg: Specifies base physical address and size of the registers
+- interrupt-controller: Indentifies the node as an interrupt controller
+- #interrupt-cells: Specifies the number of cells to encode an interrupt
+  specifier, shall be 2
+- interrupts: interrupts references to primary interrupt controller
+
+Example:
+
+exti: interrupt-controller@40013c00 {
+	compatible = "st,stm32-exti";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	reg = <0x40013C00 0x400>;
+	interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+};

arch/arm/Kconfig

View file

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b2113c2..3cd9042 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -879,6 +879,7 @@ config ARCH_STM32
 	select CLKSRC_STM32
 	select PINCTRL
 	select RESET_CONTROLLER
+	select STM32_EXTI
 	help
 	  Support for STMicroelectronics STM32 processors.
 

arch/arm/boot/dts/stm32f429.dtsi

View file

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 35df462..1a189d4 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -176,6 +176,14 @@
 			reg = <0x40013800 0x400>;
 		};
 
+		exti: interrupt-controller@40013c00 {
+			compatible = "st,stm32-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x40013C00 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+		};
+
 		pin-controller {
 			#address-cells = <1>;
 			#size-cells = <1>;

arch/arm/include/asm/arch_gicv3.h

View file

diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index e08d151..dfe4002 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -34,6 +34,7 @@
 #define ICC_CTLR			__ACCESS_CP15(c12, 0, c12, 4)
 #define ICC_SRE				__ACCESS_CP15(c12, 0, c12, 5)
 #define ICC_IGRPEN1			__ACCESS_CP15(c12, 0, c12, 7)
+#define ICC_BPR1			__ACCESS_CP15(c12, 0, c12, 3)
 
 #define ICC_HSRE			__ACCESS_CP15(c12, 4, c9, 5)
 
@@ -157,6 +158,11 @@ static inline void gic_write_sre(u32 val)
 	isb();
 }
 
+static inline void gic_write_bpr1(u32 val)
+{
+	asm volatile("mcr " __stringify(ICC_BPR1) : : "r" (val));
+}
+
 /*
  * Even in 32bit systems that use LPAE, there is no guarantee that the I/O
  * interface provides true 64bit atomic accesses, so using strd/ldrd doesn't

arch/arm64/Kconfig.platforms

View file

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 4a4318b..a8c77c7 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -93,6 +93,7 @@ config ARCH_MVEBU
 	select ARMADA_CP110_SYSCON
 	select ARMADA_37XX_CLK
 	select MVEBU_ODMI
+	select MVEBU_PIC
 	help
 	  This enables support for Marvell EBU familly, including:
 	   - Armada 3700 SoC Family

arch/arm64/include/asm/arch_gicv3.h

View file

diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index 8ec88e5..fc2a0cb 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -28,6 +28,7 @@
 #define ICC_CTLR_EL1			sys_reg(3, 0, 12, 12, 4)
 #define ICC_SRE_EL1			sys_reg(3, 0, 12, 12, 5)
 #define ICC_GRPEN1_EL1			sys_reg(3, 0, 12, 12, 7)
+#define ICC_BPR1_EL1			sys_reg(3, 0, 12, 12, 3)
 
 #define ICC_SRE_EL2			sys_reg(3, 4, 12, 9, 5)
 
@@ -165,6 +166,11 @@ static inline void gic_write_sre(u32 val)
 	isb();
 }
 
+static inline void gic_write_bpr1(u32 val)
+{
+	asm volatile("msr_s " __stringify(ICC_BPR1_EL1) ", %0" : : "r" (val));
+}
+
 #define gic_read_typer(c)		readq_relaxed(c)
 #define gic_write_irouter(v, c)		writeq_relaxed(v, c)
 

drivers/acpi/Kconfig

View file

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 696c6f7..33201d4 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -523,4 +523,8 @@ config ACPI_CONFIGFS
 	  userspace. The configurable ACPI groups will be visible under
 	  /config/acpi, assuming configfs is mounted under /config.
 
+if ARM64
+source "drivers/acpi/arm64/Kconfig"
+endif
+
 endif	# ACPI

drivers/acpi/Makefile

View file

diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 3a1fa8f..313f970 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -106,3 +106,5 @@ obj-$(CONFIG_ACPI_CONFIGFS)	+= acpi_configfs.o
 
 video-objs			+= acpi_video.o video_detect.o
 obj-y				+= dptf/
+
+obj-$(CONFIG_ARM64)		+= arm64/

drivers/acpi/arm64/Kconfig

View file

diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
new file mode 100644
index 0000000..4616da4
--- /dev/null
+++ b/drivers/acpi/arm64/Kconfig
@@ -0,0 +1,6 @@
+#
+# ACPI Configuration for ARM64
+#
+
+config ACPI_IORT
+	bool

drivers/acpi/arm64/Makefile

View file

diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
new file mode 100644
index 0000000..72331f2
--- /dev/null
+++ b/drivers/acpi/arm64/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ACPI_IORT) 	+= iort.o

drivers/acpi/arm64/iort.c

View file

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
new file mode 100644
index 0000000..6b81746
--- /dev/null
+++ b/drivers/acpi/arm64/iort.c
@@ -0,0 +1,368 @@
+/*
+ * Copyright (C) 2016, Semihalf
+ *	Author: Tomasz Nowicki <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * This file implements early detection/parsing of I/O mapping
+ * reported to OS through firmware via I/O Remapping Table (IORT)
+ * IORT document number: ARM DEN 0049A
+ */
+
+#define pr_fmt(fmt)	"ACPI: IORT: " fmt
+
+#include <linux/acpi_iort.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+struct iort_its_msi_chip {
+	struct list_head	list;
+	struct fwnode_handle	*fw_node;
+	u32			translation_id;
+};
+
+typedef acpi_status (*iort_find_node_callback)
+	(struct acpi_iort_node *node, void *context);
+
+/* Root pointer to the mapped IORT table */
+static struct acpi_table_header *iort_table;
+
+static LIST_HEAD(iort_msi_chip_list);
+static DEFINE_SPINLOCK(iort_msi_chip_lock);
+
+/**
+ * iort_register_domain_token() - register domain token and related ITS ID
+ * to the list from where we can get it back later on.
+ * @trans_id: ITS ID.
+ * @fw_node: Domain token.
+ *
+ * Returns: 0 on success, -ENOMEM if no memory when allocating list element
+ */
+int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node)
+{
+	struct iort_its_msi_chip *its_msi_chip;
+
+	its_msi_chip = kzalloc(sizeof(*its_msi_chip), GFP_KERNEL);
+	if (!its_msi_chip)
+		return -ENOMEM;
+
+	its_msi_chip->fw_node = fw_node;
+	its_msi_chip->translation_id = trans_id;
+
+	spin_lock(&iort_msi_chip_lock);
+	list_add(&its_msi_chip->list, &iort_msi_chip_list);
+	spin_unlock(&iort_msi_chip_lock);
+
+	return 0;
+}
+
+/**
+ * iort_deregister_domain_token() - Deregister domain token based on ITS ID
+ * @trans_id: ITS ID.
+ *
+ * Returns: none.
+ */
+void iort_deregister_domain_token(int trans_id)
+{
+	struct iort_its_msi_chip *its_msi_chip, *t;
+
+	spin_lock(&iort_msi_chip_lock);
+	list_for_each_entry_safe(its_msi_chip, t, &iort_msi_chip_list, list) {
+		if (its_msi_chip->translation_id == trans_id) {
+			list_del(&its_msi_chip->list);
+			kfree(its_msi_chip);
+			break;
+		}
+	}
+	spin_unlock(&iort_msi_chip_lock);
+}
+
+/**
+ * iort_find_domain_token() - Find domain token based on given ITS ID
+ * @trans_id: ITS ID.
+ *
+ * Returns: domain token when find on the list, NULL otherwise
+ */
+struct fwnode_handle *iort_find_domain_token(int trans_id)
+{
+	struct fwnode_handle *fw_node = NULL;
+	struct iort_its_msi_chip *its_msi_chip;
+
+	spin_lock(&iort_msi_chip_lock);
+	list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) {
+		if (its_msi_chip->translation_id == trans_id) {
+			fw_node = its_msi_chip->fw_node;
+			break;
+		}
+	}
+	spin_unlock(&iort_msi_chip_lock);
+
+	return fw_node;
+}
+
+static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type,
+					     iort_find_node_callback callback,
+					     void *context)
+{
+	struct acpi_iort_node *iort_node, *iort_end;
+	struct acpi_table_iort *iort;
+	int i;
+
+	if (!iort_table)
+		return NULL;
+
+	/* Get the first IORT node */
+	iort = (struct acpi_table_iort *)iort_table;
+	iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort,
+				 iort->node_offset);
+	iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
+				iort_table->length);
+
+	for (i = 0; i < iort->node_count; i++) {
+		if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND,
+			       "IORT node pointer overflows, bad table!\n"))
+			return NULL;
+
+		if (iort_node->type == type &&
+		    ACPI_SUCCESS(callback(iort_node, context)))
+				return iort_node;
+
+		iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
+					 iort_node->length);
+	}
+
+	return NULL;
+}
+
+static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
+					    void *context)
+{
+	struct device *dev = context;
+	acpi_status status;
+
+	if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) {
+		struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
+		struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
+		struct acpi_iort_named_component *ncomp;
+
+		if (!adev) {
+			status = AE_NOT_FOUND;
+			goto out;
+		}
+
+		status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf);
+		if (ACPI_FAILURE(status)) {
+			dev_warn(dev, "Can't get device full path name\n");
+			goto out;
+		}
+
+		ncomp = (struct acpi_iort_named_component *)node->node_data;
+		status = !strcmp(ncomp->device_name, buf.pointer) ?
+							AE_OK : AE_NOT_FOUND;
+		acpi_os_free(buf.pointer);
+	} else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
+		struct acpi_iort_root_complex *pci_rc;
+		struct pci_bus *bus;
+
+		bus = to_pci_bus(dev);
+		pci_rc = (struct acpi_iort_root_complex *)node->node_data;
+
+		/*
+		 * It is assumed that PCI segment numbers maps one-to-one
+		 * with root complexes. Each segment number can represent only
+		 * one root complex.
+		 */
+		status = pci_rc->pci_segment_number == pci_domain_nr(bus) ?
+							AE_OK : AE_NOT_FOUND;
+	} else {
+		status = AE_NOT_FOUND;
+	}
+out:
+	return status;
+}
+
+static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
+		       u32 *rid_out)
+{
+	/* Single mapping does not care for input id */
+	if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
+		if (type == ACPI_IORT_NODE_NAMED_COMPONENT ||
+		    type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
+			*rid_out = map->output_base;
+			return 0;
+		}
+
+		pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n",
+			map, type);
+		return -ENXIO;
+	}
+
+	if (rid_in < map->input_base ||
+	    (rid_in >= map->input_base + map->id_count))
+		return -ENXIO;
+
+	*rid_out = map->output_base + (rid_in - map->input_base);
+	return 0;
+}
+
+static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node *node,
+						u32 rid_in, u32 *rid_out,
+						u8 type)
+{
+	u32 rid = rid_in;
+
+	/* Parse the ID mapping tree to find specified node type */
+	while (node) {
+		struct acpi_iort_id_mapping *map;
+		int i;
+
+		if (node->type == type) {
+			if (rid_out)
+				*rid_out = rid;
+			return node;
+		}
+
+		if (!node->mapping_offset || !node->mapping_count)
+			goto fail_map;
+
+		map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
+				   node->mapping_offset);
+
+		/* Firmware bug! */
+		if (!map->output_reference) {
+			pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
+			       node, node->type);
+			goto fail_map;
+		}
+
+		/* Do the RID translation */
+		for (i = 0; i < node->mapping_count; i++, map++) {
+			if (!iort_id_map(map, node->type, rid, &rid))
+				break;
+		}
+
+		if (i == node->mapping_count)
+			goto fail_map;
+
+		node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
+				    map->output_reference);
+	}
+
+fail_map:
+	/* Map input RID to output RID unchanged on mapping failure*/
+	if (rid_out)
+		*rid_out = rid_in;
+
+	return NULL;
+}
+
+static struct acpi_iort_node *iort_find_dev_node(struct device *dev)
+{
+	struct pci_bus *pbus;
+
+	if (!dev_is_pci(dev))
+		return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
+				      iort_match_node_callback, dev);
+
+	/* Find a PCI root bus */
+	pbus = to_pci_dev(dev)->bus;
+	while (!pci_is_root_bus(pbus))
+		pbus = pbus->parent;
+
+	return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
+			      iort_match_node_callback, &pbus->dev);
+}
+
+/**
+ * iort_msi_map_rid() - Map a MSI requester ID for a device
+ * @dev: The device for which the mapping is to be done.
+ * @req_id: The device requester ID.
+ *
+ * Returns: mapped MSI RID on success, input requester ID otherwise
+ */
+u32 iort_msi_map_rid(struct device *dev, u32 req_id)
+{
+	struct acpi_iort_node *node;
+	u32 dev_id;
+
+	node = iort_find_dev_node(dev);
+	if (!node)
+		return req_id;
+
+	iort_node_map_rid(node, req_id, &dev_id, ACPI_IORT_NODE_ITS_GROUP);
+	return dev_id;