Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

9a5467fd · Linus Torvalds <[email protected]> · 2008-08-01 11:35:16 -07:00

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits)
  tcp: MD5: Fix IPv6 signatures
  skbuff: add missing kernel-doc for do_not_encrypt
  net/ipv4/route.c: fix build error
  tcp: MD5: Fix MD5 signatures on certain ACK packets
  ipv6: Fix ip6_xmit to send fragments if ipfragok is true
  ipvs: Move userspace definitions to include/linux/ip_vs.h
  netdev: Fix lockdep warnings in multiqueue configurations.
  netfilter: xt_hashlimit: fix race between htable_destroy and htable_gc
  netfilter: ipt_recent: fix race between recent_mt_destroy and proc manipulations
  netfilter: nf_conntrack_tcp: decrease timeouts while data in unacknowledged
  irda: replace __FUNCTION__ with __func__
  nsc-ircc: default to dongle type 9 on IBM hardware
  bluetooth: add quirks for a few hci_usb devices
  hysdn: remove the packed attribute from PofTimStamp_tag
  isdn: use the common ascii hex helpers
  tg3: adapt tg3 to use reworked PCI PM code
  atm: fix direct casts of pointers to u32 in the InterPhase driver
  atm: fix const assignment/discard warnings in the ATM networking driver
  net: use the common ascii hex helpers
  random32: seeding improvement
  ...

Commit: 9a5467fd600669cda488771dac3e951034fe2b08
Parents: 67605613 · 00b1304c

Merge commit. Changes below are compared with the first parent: 67605613.

Changes

73 files changed · +2006 −1290

File	Status	Add	Del	Content
arch/arm/mach-kirkwood/rd88f6281-setup.c	modified	+3	−0	View file
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c	modified	+3	−0	View file
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c	modified	+3	−0	View file
arch/arm/mach-orion5x/wnr854t-setup.c	modified	+3	−0	View file
arch/arm/mach-orion5x/wrt350n-v2-setup.c	modified	+3	−0	View file
drivers/atm/iphase.c	modified	+20	−20	View file
drivers/bluetooth/hci_usb.c	modified	+7	−0	View file
drivers/isdn/gigaset/isocdata.c	modified	+2	−3	View file
drivers/isdn/hysdn/hysdn_pof.h	modified	+1	−1	View file
drivers/net/Kconfig	modified	+2	−2	View file
drivers/net/bfin_mac.c	modified	+81	−30	View file
drivers/net/cxgb3/t3_hw.c	modified	+1	−1	View file
drivers/net/ehea/ehea_main.c	modified	+2	−2	View file
drivers/net/enc28j60.c	modified	+4	−2	View file
drivers/net/forcedeth.c	modified	+58	−6	View file
drivers/net/ifb.c	modified	+7	−5	View file
drivers/net/irda/act200l-sir.c	modified	+5	−5	View file
drivers/net/irda/actisys-sir.c	modified	+1	−1	View file
drivers/net/irda/ali-ircc.c	modified	+123	−123	View file
drivers/net/irda/donauboe.c	modified	+34	−34	View file
drivers/net/irda/girbil-sir.c	modified	+6	−6	View file
drivers/net/irda/irda-usb.c	modified	+46	−46	View file
drivers/net/irda/irtty-sir.c	modified	+5	−5	View file
drivers/net/irda/kingsun-sir.c	modified	+1	−1	View file
drivers/net/irda/litelink-sir.c	modified	+4	−4	View file
drivers/net/irda/ma600-sir.c	modified	+8	−8	View file
drivers/net/irda/mcp2120-sir.c	modified	+6	−6	View file
drivers/net/irda/nsc-ircc.c	modified	+61	−58	View file
drivers/net/irda/nsc-ircc.h	modified	+3	−0	View file
drivers/net/irda/old_belkin-sir.c	modified	+4	−4	View file
drivers/net/irda/sir_dev.c	modified	+32	−31	View file
drivers/net/irda/sir_dongle.c	modified	+1	−1	View file
drivers/net/irda/smsc-ircc2.c	modified	+60	−60	View file
drivers/net/irda/tekram-sir.c	modified	+5	−5	View file
drivers/net/irda/toim3232-sir.c	modified	+5	−5	View file
drivers/net/irda/via-ircc.c	modified	+40	−40	View file
drivers/net/irda/vlsi_ir.c	modified	+46	−46	View file
drivers/net/irda/vlsi_ir.h	modified	+1	−1	View file
drivers/net/irda/w83977af_ir.c	modified	+31	−31	View file
drivers/net/mv643xx_eth.c	modified	+236	−122	View file
drivers/net/ne.c	modified	+3	−3	View file
drivers/net/s2io.c	modified	+23	−6	View file
drivers/net/sh_eth.c	modified	+166	−36	View file
drivers/net/sh_eth.h	modified	+314	−112	View file
drivers/net/skfp/smt.c	modified	+6	−7	View file
drivers/net/tg3.c	modified	+28	−39	View file
drivers/net/usb/dm9601.c	modified	+42	−10	View file
drivers/net/wd.c	modified	+1	−1	View file
include/linux/Kbuild	modified	+1	−0	View file
include/linux/ip_vs.h	added	+245	−0	View file
include/linux/netdevice.h	modified	+55	−31	View file
include/linux/netfilter/nf_conntrack_tcp.h	modified	+3	−0	View file
include/linux/skbuff.h	modified	+1	−0	View file
include/net/ip_vs.h	modified	+8	−245	View file
lib/random32.c	modified	+27	−21	View file
net/atm/mpc.c	modified	+13	−9	View file
net/bridge/br_device.c	modified	+8	−1	View file
net/bridge/br_if.c	modified	+3	−0	View file
net/bridge/br_netfilter.c	modified	+34	−29	View file
net/bridge/br_private.h	modified	+6	−0	View file
net/core/dev.c	modified	+1	−0	View file
net/core/netpoll.c	modified	+1	−0	View file
net/core/pktgen.c	modified	+5	−2	View file
net/ipv4/netfilter/ipt_CLUSTERIP.c	modified	+2	−3	View file
net/ipv4/netfilter/ipt_recent.c	modified	+1	−1	View file
net/ipv4/route.c	modified	+2	−0	View file
net/ipv4/tcp_ipv4.c	modified	+2	−2	View file
net/ipv6/ip6_output.c	modified	+4	−0	View file
net/ipv6/tcp_ipv6.c	modified	+3	−3	View file
net/netfilter/nf_conntrack_proto_tcp.c	modified	+24	−5	View file
net/netfilter/xt_hashlimit.c	modified	+1	−3	View file
net/sched/sch_generic.c	modified	+4	−2	View file
net/sched/sch_teql.c	modified	+5	−4	View file

Only the first 600 diff lines are shown. Download the complete patch.

arch/arm/mach-kirkwood/rd88f6281-setup.c

View file

diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index e1f8de2..b6437f4 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -18,6 +18,7 @@
 #include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
@@ -69,6 +70,8 @@ static struct platform_device rd88f6281_nand_flash = {
 
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct mv_sata_platform_data rd88f6281_sata_data = {

arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c

View file

diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index d50e365..73e9242 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -15,6 +15,7 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@@ -88,6 +89,8 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init rd88f5181l_fxo_init(void)

arch/arm/mach-orion5x/rd88f5181l-ge-setup.c

View file

diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index b56447d..ac48201 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -15,6 +15,7 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <linux/i2c.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -89,6 +90,8 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {

arch/arm/mach-orion5x/wnr854t-setup.c

View file

diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 1af093f..25568c2 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -92,6 +93,8 @@ static struct platform_device wnr854t_nor_flash = {
 
 static struct mv643xx_eth_platform_data wnr854t_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init wnr854t_init(void)

arch/arm/mach-orion5x/wrt350n-v2-setup.c

View file

diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index aeab55c..9b8ee8c 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = {
 
 static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init wrt350n_v2_init(void)

drivers/atm/iphase.c

View file

diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 24df73a..088885e 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -156,8 +156,8 @@ static void ia_hack_tcq(IADEV *dev) {
         }
         iavcc_r->vc_desc_cnt--;
         dev->desc_tbl[desc1 -1].timestamp = 0;
-        IF_EVENT(printk("ia_hack: return_q skb = 0x%x desc = %d\n", 
-                                   (u32)dev->desc_tbl[desc1 -1].txskb, desc1);)
+        IF_EVENT(printk("ia_hack: return_q skb = 0x%p desc = %d\n",
+                                   dev->desc_tbl[desc1 -1].txskb, desc1);)
         if (iavcc_r->pcr < dev->rate_limit) {
            IA_SKB_STATE (dev->desc_tbl[desc1-1].txskb) |= IA_TX_DONE;
            if (ia_enque_rtn_q(&dev->tx_return_q, dev->desc_tbl[desc1 -1]) < 0)
@@ -527,8 +527,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
       inc = 0;
       testSlot = idealSlot;
       TstSchedTbl = (u16*)(SchedTbl+testSlot);  //set index and read in value
-      IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%x, NumToAssign=%d\n",
-                                testSlot, (u32)TstSchedTbl,toBeAssigned);) 
+      IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%p, NumToAssign=%d\n",
+                                testSlot, TstSchedTbl,toBeAssigned);)
       memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
       while (cbrVC)  // If another VC at this location, we have to keep looking
       {
@@ -536,8 +536,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
           testSlot = idealSlot - inc;
           if (testSlot < 0) { // Wrap if necessary
              testSlot += dev->CbrTotEntries;
-             IF_CBR(printk("Testslot Wrap. STable Start=0x%x,Testslot=%d\n",
-                                                       (u32)SchedTbl,testSlot);)
+             IF_CBR(printk("Testslot Wrap. STable Start=0x%p,Testslot=%d\n",
+                                                       SchedTbl,testSlot);)
           }
           TstSchedTbl = (u16 *)(SchedTbl + testSlot);  // set table index
           memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC)); 
@@ -552,8 +552,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
           } 
           // set table index and read in value
           TstSchedTbl = (u16*)(SchedTbl + testSlot);
-          IF_CBR(printk("Reading CBR Tbl from 0x%x, CbrVal=0x%x Iteration %d\n",
-                          (u32)TstSchedTbl,cbrVC,inc);) 
+          IF_CBR(printk("Reading CBR Tbl from 0x%p, CbrVal=0x%x Iteration %d\n",
+                          TstSchedTbl,cbrVC,inc);)
           memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
        } /* while */
        // Move this VCI number into this location of the CBR Sched table.
@@ -1427,11 +1427,11 @@ static int rx_init(struct atm_dev *dev)
 	/* We know this is 32bit bus addressed so the following is safe */
 	writel(iadev->rx_dle_dma & 0xfffff000,
 	       iadev->dma + IPHASE5575_RX_LIST_ADDR);  
-	IF_INIT(printk("Tx Dle list addr: 0x%08x value: 0x%0x\n", 
-                      (u32)(iadev->dma+IPHASE5575_TX_LIST_ADDR), 
+	IF_INIT(printk("Tx Dle list addr: 0x%p value: 0x%0x\n",
+                      iadev->dma+IPHASE5575_TX_LIST_ADDR,
                       *(u32*)(iadev->dma+IPHASE5575_TX_LIST_ADDR));  
-	printk("Rx Dle list addr: 0x%08x value: 0x%0x\n", 
-                      (u32)(iadev->dma+IPHASE5575_RX_LIST_ADDR), 
+	printk("Rx Dle list addr: 0x%p value: 0x%0x\n",
+                      iadev->dma+IPHASE5575_RX_LIST_ADDR,
                       *(u32*)(iadev->dma+IPHASE5575_RX_LIST_ADDR));)  
   
 	writew(0xffff, iadev->reass_reg+REASS_MASK_REG);  
@@ -1470,7 +1470,7 @@ static int rx_init(struct atm_dev *dev)
 		buf_desc_ptr++;		  
 		rx_pkt_start += iadev->rx_buf_sz;  
 	}  
-	IF_INIT(printk("Rx Buffer desc ptr: 0x%0x\n", (u32)(buf_desc_ptr));)  
+	IF_INIT(printk("Rx Buffer desc ptr: 0x%p\n", buf_desc_ptr);)
         i = FREE_BUF_DESC_Q*iadev->memSize; 
 	writew(i >> 16,  iadev->reass_reg+REASS_QUEUE_BASE); 
         writew(i, iadev->reass_reg+FREEQ_ST_ADR);
@@ -1487,7 +1487,7 @@ static int rx_init(struct atm_dev *dev)
 		*freeq_start = (u_short)i;  
 		freeq_start++;  
 	}  
-	IF_INIT(printk("freeq_start: 0x%0x\n", (u32)freeq_start);)  
+	IF_INIT(printk("freeq_start: 0x%p\n", freeq_start);)
         /* Packet Complete Queue */
         i = (PKT_COMP_Q * iadev->memSize) & 0xffff;
         writew(i, iadev->reass_reg+PCQ_ST_ADR);
@@ -1713,7 +1713,7 @@ static void tx_dle_intr(struct atm_dev *dev)
                IA_SKB_STATE(skb) |= IA_DLED;
                skb_queue_tail(&iavcc->txing_skb, skb);
             }
-            IF_EVENT(printk("tx_dle_intr: enque skb = 0x%x \n", (u32)skb);)
+            IF_EVENT(printk("tx_dle_intr: enque skb = 0x%p \n", skb);)
             if (++dle == iadev->tx_dle_q.end)
                  dle = iadev->tx_dle_q.start;
         }
@@ -2044,8 +2044,8 @@ static int tx_init(struct atm_dev *dev)
         writew(tmp16, iadev->seg_reg+CBR_TAB_END+1); // CBR_PTR;
         tmp16 = (CBR_SCHED_TABLE*iadev->memSize + iadev->num_vc*6 - 2) >> 1;
         writew(tmp16, iadev->seg_reg+CBR_TAB_END);
-        IF_INIT(printk("iadev->seg_reg = 0x%x CBR_PTR_BASE = 0x%x\n",
-               (u32)iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));)
+        IF_INIT(printk("iadev->seg_reg = 0x%p CBR_PTR_BASE = 0x%x\n",
+               iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));)
         IF_INIT(printk("CBR_TAB_BEG = 0x%x, CBR_TAB_END = 0x%x, CBR_PTR = 0x%x\n",
           readw(iadev->seg_reg+CBR_TAB_BEG), readw(iadev->seg_reg+CBR_TAB_END),
           readw(iadev->seg_reg+CBR_TAB_END+1));)
@@ -2963,8 +2963,8 @@ static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb) {
  
 	/* Put the packet in a tx buffer */   
 	trailer = iadev->tx_buf[desc-1].cpcs;
-        IF_TX(printk("Sent: skb = 0x%x skb->data: 0x%x len: %d, desc: %d\n",
-                  (u32)skb, (u32)skb->data, skb->len, desc);)
+        IF_TX(printk("Sent: skb = 0x%p skb->data: 0x%p len: %d, desc: %d\n",
+                  skb, skb->data, skb->len, desc);)
 	trailer->control = 0; 
         /*big endian*/ 
 	trailer->length = ((skb->len & 0xff) << 8) | ((skb->len & 0xff00) >> 8);
@@ -3181,7 +3181,7 @@ static int __devinit ia_init_one(struct pci_dev *pdev,
 	}
 	dev->dev_data = iadev;
 	IF_INIT(printk(DEV_LABEL "registered at (itf :%d)\n", dev->number);)
-	IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev,
+	IF_INIT(printk("dev_id = 0x%p iadev->LineRate = %d \n", dev,
 		iadev->LineRate);)
 
 	pci_set_drvdata(pdev, dev);

drivers/bluetooth/hci_usb.c

View file

diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
index 192522e..c33bb59 100644
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -134,6 +134,13 @@ static struct usb_device_id blacklist_ids[] = {
 
 	/* Dell laptop with Broadcom chip */
 	{ USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+	/* Dell Wireless 370 */
+	{ USB_DEVICE(0x413c, 0x8156), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+	/* Dell Wireless 410 */
+	{ USB_DEVICE(0x413c, 0x8152), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+	/* Broadcom 2046 */
+	{ USB_DEVICE(0x0a5c, 0x2151), .driver_info = HCI_RESET },
 
 	/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
 	{ USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET },

drivers/isdn/gigaset/isocdata.c

View file

diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index e30a777..fbce522 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -247,7 +247,6 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,
 #ifdef CONFIG_GIGASET_DEBUG
 	unsigned char c;
 	static char dbgline[3 * 32 + 1];
-	static const char hexdigit[] = "0123456789abcdef";
 	int i = 0;
 	while (count-- > 0) {
 		if (i > sizeof(dbgline) - 4) {
@@ -258,8 +257,8 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,
 		c = *bytes++;
 		dbgline[i] = (i && !(i % 12)) ? '-' : ' ';
 		i++;
-		dbgline[i++] = hexdigit[(c >> 4) & 0x0f];
-		dbgline[i++] = hexdigit[c & 0x0f];
+		dbgline[i++] = hex_asc_hi(c);
+		dbgline[i++] = hex_asc_lo(c);
 	}
 	dbgline[i] = '\0';
 	gig_dbg(level, "%s:%s", tag, dbgline);

drivers/isdn/hysdn/hysdn_pof.h

View file

diff --git a/drivers/isdn/hysdn/hysdn_pof.h b/drivers/isdn/hysdn/hysdn_pof.h
index a368d6c..3a72b90 100644
--- a/drivers/isdn/hysdn/hysdn_pof.h
+++ b/drivers/isdn/hysdn/hysdn_pof.h
@@ -60,7 +60,7 @@ typedef struct PofRecHdr_tag {	/* Pof record header */
 
 typedef struct PofTimeStamp_tag {
 /*00 */ unsigned long UnixTime __attribute__((packed));
-	/*04 */ unsigned char DateTimeText[0x28] __attribute__((packed));
+	/*04 */ unsigned char DateTimeText[0x28];
 	/* =40 */
 /*2C */
 } tPofTimeStamp;

drivers/net/Kconfig

View file

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fa533c2..8a03875 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -510,14 +510,14 @@ config STNIC
 config SH_ETH
 	tristate "Renesas SuperH Ethernet support"
 	depends on SUPERH && \
-		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712)
+		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763)
 	select CRC32
 	select MII
 	select MDIO_BITBANG
 	select PHYLIB
 	help
 	  Renesas SuperH Ethernet device driver.
-	  This driver support SH7710 and SH7712.
+	  This driver support SH7710, SH7712 and SH7763.
 
 config SUNLANCE
 	tristate "Sun LANCE support"

drivers/net/bfin_mac.c

View file

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index a8ec60e..3db7db1 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -605,36 +605,87 @@ adjust_head:
 static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
 				struct net_device *dev)
 {
-	unsigned int data;
+	u16 *data;
 
 	current_tx_ptr->skb = skb;
 
-	/*
-	 * Is skb->data always 16-bit aligned?
-	 * Do we need to memcpy((char *)(tail->packet + 2), skb->data, len)?
-	 */
-	if ((((unsigned int)(skb->data)) & 0x02) == 2) {
-		/* move skb->data to current_tx_ptr payload */
-		data = (unsigned int)(skb->data) - 2;
-		*((unsigned short *)data) = (unsigned short)(skb->len);
-		current_tx_ptr->desc_a.start_addr = (unsigned long)data;
-		/* this is important! */
-		blackfin_dcache_flush_range(data, (data + (skb->len)) + 2);
-
+	if (ANOMALY_05000285) {
+		/*
+		 * TXDWA feature is not avaible to older revision < 0.3 silicon
+		 * of BF537
+		 *
+		 * Only if data buffer is ODD WORD alignment, we do not
+		 * need to memcpy
+		 */
+		u32 data_align = (u32)(skb->data) & 0x3;
+		if (data_align == 0x2) {
+			/* move skb->data to current_tx_ptr payload */
+			data = (u16 *)(skb->data) - 1;
+			*data = (u16)(skb->len);
+			current_tx_ptr->desc_a.start_addr = (u32)data;
+			/* this is important! */
+			blackfin_dcache_flush_range((u32)data,
+					(u32)((u8 *)data + skb->len + 4));
+		} else {
+			*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+			memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+				skb->len);
+			current_tx_ptr->desc_a.start_addr =
+				(u32)current_tx_ptr->packet;
+			if (current_tx_ptr->status.status_word != 0)
+				current_tx_ptr->status.status_word = 0;
+			blackfin_dcache_flush_range(
+				(u32)current_tx_ptr->packet,
+				(u32)(current_tx_ptr->packet + skb->len + 2));
+		}
 	} else {
-		*((unsigned short *)(current_tx_ptr->packet)) =
-		    (unsigned short)(skb->len);
-		memcpy((char *)(current_tx_ptr->packet + 2), skb->data,
-		       (skb->len));
-		current_tx_ptr->desc_a.start_addr =
-		    (unsigned long)current_tx_ptr->packet;
-		if (current_tx_ptr->status.status_word != 0)
-			current_tx_ptr->status.status_word = 0;
-		blackfin_dcache_flush_range((unsigned int)current_tx_ptr->
-					    packet,
-					    (unsigned int)(current_tx_ptr->
-							   packet + skb->len) +
-					    2);
+		/*
+		 * TXDWA feature is avaible to revision < 0.3 silicon of
+		 * BF537 and always avaible to BF52x
+		 */
+		u32 data_align = (u32)(skb->data) & 0x3;
+		if (data_align == 0x0) {
+			u16 sysctl = bfin_read_EMAC_SYSCTL();
+			sysctl |= TXDWA;
+			bfin_write_EMAC_SYSCTL(sysctl);
+
+			/* move skb->data to current_tx_ptr payload */
+			data = (u16 *)(skb->data) - 2;
+			*data = (u16)(skb->len);
+			current_tx_ptr->desc_a.start_addr = (u32)data;
+			/* this is important! */
+			blackfin_dcache_flush_range(
+					(u32)data,
+					(u32)((u8 *)data + skb->len + 4));
+		} else if (data_align == 0x2) {
+			u16 sysctl = bfin_read_EMAC_SYSCTL();
+			sysctl &= ~TXDWA;
+			bfin_write_EMAC_SYSCTL(sysctl);
+
+			/* move skb->data to current_tx_ptr payload */
+			data = (u16 *)(skb->data) - 1;
+			*data = (u16)(skb->len);
+			current_tx_ptr->desc_a.start_addr = (u32)data;
+			/* this is important! */
+			blackfin_dcache_flush_range(
+					(u32)data,
+					(u32)((u8 *)data + skb->len + 4));
+		} else {
+			u16 sysctl = bfin_read_EMAC_SYSCTL();
+			sysctl &= ~TXDWA;
+			bfin_write_EMAC_SYSCTL(sysctl);
+
+			*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+			memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+				skb->len);
+			current_tx_ptr->desc_a.start_addr =
+				(u32)current_tx_ptr->packet;
+			if (current_tx_ptr->status.status_word != 0)
+				current_tx_ptr->status.status_word = 0;
+			blackfin_dcache_flush_range(
+				(u32)current_tx_ptr->packet,
+				(u32)(current_tx_ptr->packet + skb->len + 2));
+		}
 	}
 
 	/* enable this packet's dma */
@@ -691,7 +742,6 @@ static void bfin_mac_rx(struct net_device *dev)
 					 (unsigned long)skb->tail);
 
 	dev->last_rx = jiffies;
-	skb->dev = dev;
 	skb->protocol = eth_type_trans(skb, dev);
 #if defined(BFIN_MAC_CSUM_OFFLOAD)
 	skb->csum = current_rx_ptr->status.ip_payload_csum;
@@ -920,6 +970,7 @@ static int bfin_mac_open(struct net_device *dev)
 	phy_start(lp->phydev);
 	phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
 	setup_system_regs(dev);
+	setup_mac_addr(dev->dev_addr);
 	bfin_mac_disable();
 	bfin_mac_enable();
 	pr_debug("hardware init finished\n");
@@ -955,7 +1006,7 @@ static int bfin_mac_close(struct net_device *dev)
 	return 0;
 }
 
-static int __init bfin_mac_probe(struct platform_device *pdev)
+static int __devinit bfin_mac_probe(struct platform_device *pdev)
 {
 	struct net_device *ndev;
 	struct bfin_mac_local *lp;
@@ -1081,7 +1132,7 @@ out_err_probe_mac:
 	return rc;
 }
 
-static int bfin_mac_remove(struct platform_device *pdev)
+static int __devexit bfin_mac_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct bfin_mac_local *lp = netdev_priv(ndev);
@@ -1128,7 +1179,7 @@ static int bfin_mac_resume(struct platform_device *pdev)
 
 static struct platform_driver bfin_mac_driver = {
 	.probe = bfin_mac_probe,
-	.remove = bfin_mac_remove,
+	.remove = __devexit_p(bfin_mac_remove),
 	.resume = bfin_mac_resume,
 	.suspend = bfin_mac_suspend,
 	.driver = {

drivers/net/cxgb3/t3_hw.c

View file

diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 47d5178..04c0e90 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -683,7 +683,7 @@ enum {
 	SF_ERASE_SECTOR = 0xd8,	/* erase sector */
 
 	FW_FLASH_BOOT_ADDR = 0x70000,	/* start address of FW in flash */
-	FW_VERS_ADDR = 0x77ffc,    /* flash address holding FW version */
+	FW_VERS_ADDR = 0x7fffc,    /* flash address holding FW version */
 	FW_MIN_SIZE = 8            /* at least version and csum */
 };
 

drivers/net/ehea/ehea_main.c

View file

diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 0920b79..b70c531 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -2937,9 +2937,9 @@ static void ehea_rereg_mrs(struct work_struct *work)
 				}
 			}
 		}
-       mutex_unlock(&dlpar_mem_lock);
-       ehea_info("re-initializing driver complete");
+	ehea_info("re-initializing driver complete");
 out:
+	mutex_unlock(&dlpar_mem_lock);
 	return;
 }
 

drivers/net/enc28j60.c

View file

diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index c05cb15..aa0bf6e 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -1547,8 +1547,10 @@ static int __devinit enc28j60_probe(struct spi_device *spi)
 	random_ether_addr(dev->dev_addr);
 	enc28j60_set_hw_macaddr(dev);
 
-	ret = request_irq(spi->irq, enc28j60_irq, IRQF_TRIGGER_FALLING,
-			  DRV_NAME, priv);
+	/* Board setup must set the relevant edge trigger type;
+	 * level triggers won't currently work.
+	 */
+	ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
 	if (ret < 0) {
 		if (netif_msg_probe(priv))
 			dev_err(&spi->dev, DRV_NAME ": request irq %d failed "

drivers/net/forcedeth.c

View file

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 4ed89fa..01b38b0 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -333,6 +333,7 @@ enum {
 	NvRegPowerState2 = 0x600,
 #define NVREG_POWERSTATE2_POWERUP_MASK		0x0F11
 #define NVREG_POWERSTATE2_POWERUP_REV_A3	0x0001
+#define NVREG_POWERSTATE2_PHY_RESET		0x0004
 };
 
 /* Big endian: should work, but is untested */
@@ -529,6 +530,7 @@ union ring_type {
 #define PHY_REALTEK_INIT_REG4	0x14
 #define PHY_REALTEK_INIT_REG5	0x18
 #define PHY_REALTEK_INIT_REG6	0x11
+#define PHY_REALTEK_INIT_REG7	0x01
 #define PHY_REALTEK_INIT1	0x0000
 #define PHY_REALTEK_INIT2	0x8e00
 #define PHY_REALTEK_INIT3	0x0001
@@ -537,6 +539,9 @@ union ring_type {
 #define PHY_REALTEK_INIT6	0xf5c7
 #define PHY_REALTEK_INIT7	0x1000
 #define PHY_REALTEK_INIT8	0x0003
+#define PHY_REALTEK_INIT9	0x0008
+#define PHY_REALTEK_INIT10	0x0005
+#define PHY_REALTEK_INIT11	0x0200
 #define PHY_REALTEK_INIT_MSK1	0x0003
 
 #define PHY_GIGABIT	0x0100
@@ -1149,6 +1154,42 @@ static int phy_init(struct net_device *dev)
 				return PHY_ERROR;
 			}
 		}
+		if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
+		    np->phy_rev == PHY_REV_REALTEK_8211C) {
+			u32 powerstate = readl(base + NvRegPowerState2);
+
+			/* need to perform hw phy reset */
+			powerstate |= NVREG_POWERSTATE2_PHY_RESET;
+			writel(powerstate, base + NvRegPowerState2);
+			msleep(25);
+
+			powerstate &= ~NVREG_POWERSTATE2_PHY_RESET;
+			writel(powerstate, base + NvRegPowerState2);
+			msleep(25);
+
+			reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
+			reg |= PHY_REALTEK_INIT9;
+			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, reg)) {
+				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+				return PHY_ERROR;
+			}
+			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10)) {
+				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+				return PHY_ERROR;
+			}
+			reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, MII_READ);
+			if (!(reg & PHY_REALTEK_INIT11)) {
+				reg |= PHY_REALTEK_INIT11;
+				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, reg)) {
+					printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+					return PHY_ERROR;
+				}
+			}
+			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+				return PHY_ERROR;
+			}
+		}
 		if (np->phy_model == PHY_MODEL_REALTEK_8201) {
 			if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
 			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
@@ -1201,12 +1242,23 @@ static int phy_init(struct net_device *dev)
 	mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
 	mii_control |= BMCR_ANENABLE;
 
-	/* reset the phy
-	 * (certain phys need bmcr to be setup with reset)
-	 */
-	if (phy_reset(dev, mii_control)) {
-		printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev));
-		return PHY_ERROR;
+	if (np->phy_oui == PHY_OUI_REALTEK &&
+	    np->phy_model == PHY_MODEL_REALTEK_8211 &&
+	    np->phy_rev == PHY_REV_REALTEK_8211C) {
+		/* start autoneg since we already performed hw reset above */
+		mii_control |= BMCR_ANRESTART;
+		if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
+			printk(KERN_INFO "%s: phy init failed\n", pci_name(np->pci_dev));
+			return PHY_ERROR;