Merge tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmc
Merge commit. Changes below are compared with the first parent: d429a363.
Changes
40 files changed · +1050 −471
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
View filediff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index 532b1d4..6cd3525 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -46,13 +46,14 @@ Required Properties:
- if CIU clock divider value is 0 (that is divide by 1), both tx and rx
phase shift clocks should be 0.
-Required properties for a slot:
+Required properties for a slot (Deprecated - Recommend to use one slot per host):
* gpios: specifies a list of gpios used for command, clock and data bus. The
first gpio is the command line and the second gpio is the clock line. The
rest of the gpios (depending on the bus-width property) are the data lines in
no particular order. The format of the gpio specifier depends on the gpio
controller.
+(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
Example:
@@ -69,21 +70,13 @@ Example:
dwmmc0@12200000 {
num-slots = <1>;
- supports-highspeed;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
- <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
- <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
- <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
- <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
- };
+ bus-width = <8>;
};
Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
View filediff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index e5bc49f..3b35449 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -34,13 +34,11 @@ Example:
num-slots = <1>;
vmmc-supply = <&ldo12>;
fifo-depth = <0x100>;
- supports-highspeed;
pinctrl-names = "default";
pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- cd-gpios = <&gpio10 3 0>;
- };
+ bus-width = <4>;
+ disable-wp;
+ cd-gpios = <&gpio10 3 0>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
};
Documentation/devicetree/bindings/mmc/mmc.txt
View filediff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 3c18001..431716e 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -34,8 +34,8 @@ Optional properties:
- cap-power-off-card: powering off the card is safe
- cap-sdio-irq: enable SDIO IRQ signalling on this interface
- full-pwr-cycle: full power cycle of the card is supported
-- mmc-highspeed-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported
-- mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
+- mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported
+- mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
- mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported
- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
View filediff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
new file mode 100644
index 0000000..299081f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
@@ -0,0 +1,32 @@
+* Renesas Multi Media Card Interface (MMCIF) Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the MMCIF device.
+
+
+Required properties:
+
+- compatible: must contain one of the following
+ - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
+ - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs
+ - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs
+ - "renesas,sh-mmcif" for the generic MMCIF
+
+- clocks: reference to the functional clock
+
+- dmas: reference to the DMA channels, one per channel name listed in the
+ dma-names property.
+- dma-names: must contain "tx" for the transmit DMA channel and "rx" for the
+ receive DMA channel.
+
+
+Example: R8A7790 (R-Car H2) MMCIF0
+
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+ dma-names = "tx", "rx";
+ };
Documentation/devicetree/bindings/mmc/sdhci-msm.txt
View filediff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 81b33b5..485483a 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -27,8 +27,8 @@ Example:
bus-width = <8>;
non-removable;
- vmmc = <&pm8941_l20>;
- vqmmc = <&pm8941_s3>;
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
pinctrl-names = "default";
pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
@@ -44,8 +44,8 @@ Example:
bus-width = <4>;
cd-gpios = <&msmgpio 62 0x1>;
- vmmc = <&pm8941_l21>;
- vqmmc = <&pm8941_l13>;
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
pinctrl-names = "default";
pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
Documentation/devicetree/bindings/mmc/sdhci-st.txt
View filediff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
new file mode 100644
index 0000000..7527db4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -0,0 +1,33 @@
+* STMicroelectronics sdhci-st MMC/SD controller
+
+This file documents the differences between the core properties in
+Documentation/devicetree/bindings/mmc/mmc.txt and the properties
+used by the sdhci-st driver.
+
+Required properties:
+- compatible : Must be "st,sdhci"
+- clock-names : Should be "mmc"
+ See: Documentation/devicetree/bindings/resource-names.txt
+- clocks : Phandle of the clock used by the sdhci controler
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+- non-removable: non-removable slot
+ See: Documentation/devicetree/bindings/mmc/mmc.txt
+- bus-width: Number of data lines
+ See: Documentation/devicetree/bindings/mmc/mmc.txt
+
+Example:
+
+mmc0: sdhci@fe81e000 {
+ compatible = "st,sdhci";
+ status = "disabled";
+ reg = <0xfe81e000 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_a1_ls 1>;
+ bus-width = <8>
+};
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
View filediff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 2d4a725..346c609 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -67,7 +67,8 @@ Optional properties:
* card-detect-delay: Delay in milli-seconds before detecting card after card
insert event. The default value is 0.
-* supports-highspeed: Enables support for high speed cards (up to 50MHz)
+* supports-highspeed (DEPRECATED): Enables support for high speed cards (up to 50MHz)
+ (use "cap-mmc-highspeed" or "cap-sd-highspeed" instead)
* broken-cd: as documented in mmc core bindings.
@@ -98,14 +99,11 @@ board specific portions as listed below.
clock-frequency = <400000000>;
clock-freq-min-max = <400000 200000000>;
num-slots = <1>;
- supports-highspeed;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
vmmc-supply = <&buck8>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- };
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
};
Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
View filediff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index ce80561..76bf087 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -12,6 +12,7 @@ Required properties:
Should be "ti,omap3-hsmmc", for OMAP3 controllers
Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0
Should be "ti,omap4-hsmmc", for OMAP4 controllers
+ Should be "ti,am33xx-hsmmc", for AM335x controllers
- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
Optional properties:
@@ -56,3 +57,56 @@ Examples:
&edma 25>;
dma-names = "tx", "rx";
};
+
+[workaround for missing swakeup on am33xx]
+
+This SOC is missing the swakeup line, it will not detect SDIO irq
+while in suspend.
+
+ ------
+ | PRCM |
+ ------
+ ^ |
+ swakeup | | fclk
+ | v
+ ------ ------- -----
+ | card | -- CIRQ --> | hsmmc | -- IRQ --> | CPU |
+ ------ ------- -----
+
+In suspend the fclk is off and the module is disfunctional. Even register reads
+will fail. A small logic in the host will request fclk restore, when an
+external event is detected. Once the clock is restored, the host detects the
+event normally. Since am33xx doesn't have this line it never wakes from
+suspend.
+
+The workaround is to reconfigure the dat1 line as a GPIO upon suspend. To make
+this work, we need to set the named pinctrl states "default" and "idle".
+Prepare idle to remux dat1 as a gpio, and default to remux it back as sdio
+dat1. The MMC driver will then toggle between idle and default state during
+runtime.
+
+In summary:
+1. select matching 'compatible' section, see example below.
+2. specify pinctrl states "default" and "idle", "sleep" is optional.
+3. specify the gpio irq used for detecting sdio irq in suspend
+
+If configuration is incomplete, a warning message is emitted "falling back to
+polling". Also check the "sdio irq mode" in /sys/kernel/debug/mmc0/regs. Mind
+not every application needs SDIO irq, e.g. MMC cards.
+
+ mmc1: mmc@48060100 {
+ compatible = "ti,am33xx-hsmmc";
+ ...
+ pinctrl-names = "default", "idle", "sleep"
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-1 = <&mmc1_idle>;
+ pinctrl-2 = <&mmc1_sleep>;
+ ...
+ interrupts-extended = <&intc 64 &gpio2 28 0>;
+ };
+
+ mmc1_idle : pinmux_cirq_pin {
+ pinctrl-single,pins = <
+ 0x0f8 0x3f /* GPIO2_28 */
+ >;
+ };
Documentation/devicetree/bindings/mmc/tmio_mmc.txt
View filediff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
index 6a2a116..fa0f327 100644
--- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
@@ -18,6 +18,7 @@ Required properties:
"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
+ "renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC
Optional properties:
- toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
drivers/mmc/card/block.c
View filediff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 452782b..ede41f0 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -2028,8 +2028,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
/* complete ongoing async transfer before issuing discard */
if (card->host->areq)
mmc_blk_issue_rw_rq(mq, NULL);
- if (req->cmd_flags & REQ_SECURE &&
- !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN))
+ if (req->cmd_flags & REQ_SECURE)
ret = mmc_blk_issue_secdiscard_rq(mq, req);
else
ret = mmc_blk_issue_discard_rq(mq, req);
@@ -2432,6 +2431,8 @@ static int mmc_blk_probe(struct mmc_card *card)
if (!(card->csd.cmdclass & CCC_BLOCK_READ))
return -ENODEV;
+ mmc_fixup_device(card, blk_fixups);
+
md = mmc_blk_alloc(card);
if (IS_ERR(md))
return PTR_ERR(md);
@@ -2446,7 +2447,6 @@ static int mmc_blk_probe(struct mmc_card *card)
goto out;
mmc_set_drvdata(card, md);
- mmc_fixup_device(card, blk_fixups);
if (mmc_add_disk(md))
goto out;
drivers/mmc/core/bus.c
View filediff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index d2dbf02..8a1f124 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -180,7 +180,6 @@ static int mmc_bus_resume(struct device *dev)
#endif
#ifdef CONFIG_PM_RUNTIME
-
static int mmc_runtime_suspend(struct device *dev)
{
struct mmc_card *card = mmc_dev_to_card(dev);
@@ -196,17 +195,10 @@ static int mmc_runtime_resume(struct device *dev)
return host->bus_ops->runtime_resume(host);
}
-
-static int mmc_runtime_idle(struct device *dev)
-{
- return 0;
-}
-
#endif /* !CONFIG_PM_RUNTIME */
static const struct dev_pm_ops mmc_bus_pm_ops = {
- SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume,
- mmc_runtime_idle)
+ SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, NULL)
SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume)
};
drivers/mmc/core/core.c
View filediff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 7dc0c85..d03a080 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2102,7 +2102,8 @@ EXPORT_SYMBOL(mmc_can_sanitize);
int mmc_can_secure_erase_trim(struct mmc_card *card)
{
- if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)
+ if ((card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN) &&
+ !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN))
return 1;
return 0;
}
drivers/mmc/core/mmc.c
View filediff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 793c6f7..1eda8dd 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -324,13 +324,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
}
}
+ /*
+ * The EXT_CSD format is meant to be forward compatible. As long
+ * as CSD_STRUCTURE does not change, all values for EXT_CSD_REV
+ * are authorized, see JEDEC JESD84-B50 section B.8.
+ */
card->ext_csd.rev = ext_csd[EXT_CSD_REV];
- if (card->ext_csd.rev > 7) {
- pr_err("%s: unrecognised EXT_CSD revision %d\n",
- mmc_hostname(card->host), card->ext_csd.rev);
- err = -EINVAL;
- goto out;
- }
card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0];
card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1];
drivers/mmc/core/quirks.c
View filediff --git a/drivers/mmc/core/quirks.c b/drivers/mmc/core/quirks.c
index 6c36fcc..dd1d1e0 100644
--- a/drivers/mmc/core/quirks.c
+++ b/drivers/mmc/core/quirks.c
@@ -91,7 +91,7 @@ void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table)
(f->cis_device == card->cis.device ||
f->cis_device == (u16) SDIO_ANY_ID) &&
rev >= f->rev_start && rev <= f->rev_end) {
- dev_dbg(&card->dev, "calling %pF\n", f->vendor_fixup);
+ dev_dbg(&card->dev, "calling %pf\n", f->vendor_fixup);
f->vendor_fixup(card, f->data);
}
}
drivers/mmc/core/sd_ops.c
View filediff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index 274ef00..48d0c93 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -184,6 +184,9 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
mmc_delay(10);
}
+ if (!i)
+ pr_err("%s: card never left busy state\n", mmc_hostname(host));
+
if (rocr && !mmc_host_is_spi(host))
*rocr = cmd.resp[0];
drivers/mmc/host/Kconfig
View filediff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index a565254..4511358 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -290,6 +290,18 @@ config MMC_MOXART
be found on some embedded hardware such as UC-7112-LX.
If you have a controller with this interface, say Y here.
+config MMC_SDHCI_ST
+ tristate "SDHCI support on STMicroelectronics SoC"
+ depends on ARCH_STI
+ depends on MMC_SDHCI_PLTFM
+ select MMC_SDHCI_IO_ACCESSORS
+ help
+ This selects the Secure Digital Host Controller Interface in
+ STMicroelectronics SoCs.
+
+ If you have a controller with this interface, say Y or M here.
+ If unsure, say N.
+
config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support"
depends on ARCH_OMAP
@@ -303,6 +315,7 @@ config MMC_OMAP
config MMC_OMAP_HS
tristate "TI OMAP High Speed Multimedia Card Interface support"
+ depends on HAS_DMA
depends on ARCH_OMAP2PLUS || COMPILE_TEST
help
This selects the TI OMAP High Speed Multimedia card Interface.
@@ -343,7 +356,7 @@ config MMC_ATMELMCI
config MMC_SDHCI_MSM
tristate "Qualcomm SDHCI Controller Support"
- depends on ARCH_QCOM
+ depends on ARCH_QCOM || (ARM && COMPILE_TEST)
depends on MMC_SDHCI_PLTFM
help
This selects the Secure Digital Host Controller Interface (SDHCI)
@@ -440,6 +453,7 @@ config MMC_SPI
config MMC_S3C
tristate "Samsung S3C SD/MMC Card Interface support"
depends on ARCH_S3C24XX
+ depends on S3C24XX_DMAC
help
This selects a driver for the MCI interface found in
Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
@@ -477,15 +491,6 @@ config MMC_S3C_DMA
working properly and needs to be debugged before this
option is useful.
-config MMC_S3C_PIODMA
- bool "Support for both PIO and DMA"
- help
- Compile both the PIO and DMA transfer routines into the
- driver and let the platform select at run-time which one
- is best.
-
- See notes for the DMA option.
-
endchoice
config MMC_SDRICOH_CS
@@ -623,7 +628,7 @@ config MMC_DW_PCI
config MMC_SH_MMCIF
tristate "SuperH Internal MMCIF support"
- depends on MMC_BLOCK
+ depends on MMC_BLOCK && HAS_DMA
depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
help
This selects the MMC Host Interface controller (MMCIF).
@@ -697,6 +702,7 @@ config MMC_WMT
config MMC_USDHI6ROL0
tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
+ depends on HAS_DMA
help
This selects support for the Renesas USDHI6ROL0 SD/SDIO
Host Controller
drivers/mmc/host/Makefile
View filediff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 7f81ddf..f211eed 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o
+obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
drivers/mmc/host/dw_mmc.c
View filediff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 1ac227c..8f216ed 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -111,8 +111,7 @@ static const u8 tuning_blk_pattern_8bit[] = {
0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
};
-static inline bool dw_mci_fifo_reset(struct dw_mci *host);
-static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host);
+static bool dw_mci_reset(struct dw_mci *host);
#if defined(CONFIG_DEBUG_FS)
static int dw_mci_req_show(struct seq_file *s, void *v)
@@ -997,7 +996,8 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
int gpio_ro = mmc_gpio_get_ro(mmc);
/* Use platform get_ro function, else try on board write protect */
- if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT)
+ if ((slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT) ||
+ (slot->host->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT))
read_only = 0;
else if (!IS_ERR_VALUE(gpio_ro))
read_only = gpio_ro;
@@ -1235,7 +1235,7 @@ static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
* After an error, there may be data lingering
* in the FIFO
*/
- dw_mci_fifo_reset(host);
+ dw_mci_reset(host);
} else {
data->bytes_xfered = data->blocks * data->blksz;
data->error = 0;
@@ -1352,7 +1352,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
/* CMD error in data command */
if (mrq->cmd->error && mrq->data)
- dw_mci_fifo_reset(host);
+ dw_mci_reset(host);
host->cmd = NULL;
host->data = NULL;
@@ -1963,14 +1963,8 @@ static void dw_mci_work_routine_card(struct work_struct *work)
}
/* Power down slot */
- if (present == 0) {
- /* Clear down the FIFO */
- dw_mci_fifo_reset(host);
-#ifdef CONFIG_MMC_DW_IDMAC
- dw_mci_idmac_reset(host);
-#endif
-
- }
+ if (present == 0)
+ dw_mci_reset(host);
spin_unlock_bh(&host->lock);
@@ -2021,8 +2015,11 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
/* get quirks */
for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++)
- if (of_get_property(np, of_slot_quirks[idx].quirk, NULL))
+ if (of_get_property(np, of_slot_quirks[idx].quirk, NULL)) {
+ dev_warn(dev, "Slot quirk %s is deprecated\n",
+ of_slot_quirks[idx].quirk);
quirks |= of_slot_quirks[idx].id;
+ }
return quirks;
}
@@ -2208,8 +2205,11 @@ static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
return false;
}
-static inline bool dw_mci_fifo_reset(struct dw_mci *host)
+static bool dw_mci_reset(struct dw_mci *host)
{
+ u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
+ bool ret = false;
+
This diff is incomplete. Download the complete patch.
drivers/mmc/host/dw_mmc.h
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/mmci.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/mmci.h
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/moxart-mmc.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/mxs-mmc.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/omap_hsmmc.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/s3cmci.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/s3cmci.h
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/sdhci-acpi.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/sdhci-msm.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/sdhci-pci.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/sdhci-pci.h
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/sdhci-pxav3.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/sdhci-st.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/sdhci-tegra.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/sdhci.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/sh_mmcif.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/tmio_mmc_dma.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mmc/host/wmt-sdmmc.c
View fileThis diff is incomplete. Download the complete patch.
include/linux/mmc/dw_mmc.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/mmc/sdhci.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/platform_data/mmc-omap.h
View fileThis diff is incomplete. Download the complete patch.