Merge branch 'for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

aa0b3b2b · Linus Torvalds <[email protected]> · 2012-07-26 20:26:27 -07:00

Pull LED subsystem update from Bryan Wu.

* 'for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (50 commits)
  leds-lp8788: forgotten unlock at lp8788_led_work
  LEDS: propagate error codes in blinkm_detect()
  LEDS: memory leak in blinkm_led_common_set()
  leds: add new lp8788 led driver
  LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS
  leds: max8997: Simplify max8997_led_set_mode implementation
  leds/leds-s3c24xx: use devm_gpio_request
  leds: convert Network Space v2 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert DAC124S085 LED driver to devm_kzalloc()
  leds: convert LM3530 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert TCA6507 LED driver to devm_kzalloc()
  leds: convert Freescale MC13783 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert ADP5520 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA955x LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert Sun Fire LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA9532 LED driver to devm_kzalloc()
  leds: convert LT3593 LED driver to devm_kzalloc()
  leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert LP5523 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA9633 LED driver to devm_kzalloc()
  ...

Commit: aa0b3b2bee1d3ca8355de76caebf65b836c9bb6e
Parents: 6ee127b7 · d45bb116

Merge commit. Changes below are compared with the first parent: 6ee127b7.

Changes

51 files changed · +2376 −413

File	Status	Add	Del	Content
Documentation/leds/00-INDEX	modified	+2	−0	View file
Documentation/leds/leds-blinkm.txt	added	+80	−0	View file
Documentation/leds/leds-lm3556.txt	added	+85	−0	View file
Documentation/leds/ledtrig-oneshot.txt	added	+59	−0	View file
MAINTAINERS	modified	+5	−0	View file
drivers/leds/Kconfig	modified	+38	−1	View file
drivers/leds/Makefile	modified	+4	−0	View file
drivers/leds/led-class.c	modified	+23	−4	View file
drivers/leds/led-core.c	modified	+47	−19	View file
drivers/leds/led-triggers.c	modified	+68	−46	View file
drivers/leds/leds-88pm860x.c	modified	+2	−7	View file
drivers/leds/leds-adp5520.c	modified	+3	−5	View file
drivers/leds/leds-asic3.c	modified	+6	−10	View file
drivers/leds/leds-atmel-pwm.c	modified	+2	−3	View file
drivers/leds/leds-bd2802.c	modified	+2	−6	View file
drivers/leds/leds-blinkm.c	added	+815	−0	View file
drivers/leds/leds-da903x.c	modified	+2	−7	View file
drivers/leds/leds-dac124s085.c	modified	+1	−3	View file
drivers/leds/leds-gpio.c	modified	+5	−6	View file
drivers/leds/leds-lm3530.c	modified	+8	−16	View file
drivers/leds/leds-lm3556.c	added	+512	−0	View file
drivers/leds/leds-lp3944.c	modified	+3	−6	View file
drivers/leds/leds-lp5521.c	modified	+8	−12	View file
drivers/leds/leds-lp5523.c	modified	+13	−17	View file
drivers/leds/leds-lp8788.c	added	+193	−0	View file
drivers/leds/leds-lt3593.c	modified	+3	−6	View file
drivers/leds/leds-max8997.c	modified	+20	−73	View file
drivers/leds/leds-mc13783.c	modified	+4	−5	View file
drivers/leds/leds-netxbig.c	modified	+3	−7	View file
drivers/leds/leds-ns2.c	modified	+6	−13	View file
drivers/leds/leds-pca9532.c	modified	+2	−8	View file
drivers/leds/leds-pca955x.c	modified	+5	−13	View file
drivers/leds/leds-pca9633.c	modified	+1	−5	View file
drivers/leds/leds-pwm.c	modified	+2	−5	View file
drivers/leds/leds-regulator.c	modified	+3	−6	View file
drivers/leds/leds-renesas-tpu.c	modified	+9	−14	View file
drivers/leds/leds-s3c24xx.c	modified	+23	−21	View file
drivers/leds/leds-sunfire.c	modified	+6	−15	View file
drivers/leds/leds-tca6507.c	modified	+2	−15	View file
drivers/leds/leds.h	modified	+1	−1	View file
drivers/leds/ledtrig-backlight.c	modified	+4	−4	View file
drivers/leds/ledtrig-default-on.c	modified	+1	−1	View file
drivers/leds/ledtrig-gpio.c	modified	+3	−3	View file
drivers/leds/ledtrig-heartbeat.c	modified	+1	−1	View file
drivers/leds/ledtrig-ide-disk.c	modified	+4	−21	View file
drivers/leds/ledtrig-oneshot.c	added	+204	−0	View file
drivers/leds/ledtrig-timer.c	modified	+1	−1	View file
drivers/leds/ledtrig-transient.c	modified	+4	−4	View file
include/linux/leds.h	modified	+27	−2	View file
include/linux/platform_data/leds-lm3556.h	added	+50	−0	View file
net/mac80211/led.c	modified	+1	−1	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/leds/00-INDEX

View file

diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
index 29f481d..5fefe37 100644
--- a/Documentation/leds/00-INDEX
+++ b/Documentation/leds/00-INDEX
@@ -6,3 +6,5 @@ leds-lp5521.txt
 	- notes on how to use the leds-lp5521 driver.
 leds-lp5523.txt
 	- notes on how to use the leds-lp5523 driver.
+leds-lm3556.txt
+	- notes on how to use the leds-lm3556 driver.

Documentation/leds/leds-blinkm.txt

View file

diff --git a/Documentation/leds/leds-blinkm.txt b/Documentation/leds/leds-blinkm.txt
new file mode 100644
index 0000000..9dd92f4
--- /dev/null
+++ b/Documentation/leds/leds-blinkm.txt
@@ -0,0 +1,80 @@
+The leds-blinkm driver supports the devices of the BlinkM family.
+
+They are RGB-LED modules driven by a (AT)tiny microcontroller and
+communicate through I2C. The default address of these modules is
+0x09 but this can be changed through a command. By this you could
+dasy-chain up to 127 BlinkMs on an I2C bus.
+
+The device accepts RGB and HSB color values through separate commands.
+Also you can store blinking sequences as "scripts" in
+the controller and run them. Also fading is an option.
+
+The interface this driver provides is 2-fold:
+
+a) LED class interface for use with triggers
+############################################
+
+The registration follows the scheme:
+blinkm-<i2c-bus-nr>-<i2c-device-nr>-<color>
+
+$ ls -h /sys/class/leds/blinkm-6-*
+/sys/class/leds/blinkm-6-9-blue:
+brightness  device  max_brightness  power  subsystem  trigger  uevent
+
+/sys/class/leds/blinkm-6-9-green:
+brightness  device  max_brightness  power  subsystem  trigger  uevent
+
+/sys/class/leds/blinkm-6-9-red:
+brightness  device  max_brightness  power  subsystem  trigger  uevent
+
+(same is /sys/bus/i2c/devices/6-0009/leds)
+
+We can control the colors separated into red, green and blue and
+assign triggers on each color.
+
+E.g.:
+
+$ cat blinkm-6-9-blue/brightness
+05
+
+$ echo 200 > blinkm-6-9-blue/brightness
+$
+
+$ modprobe ledtrig-heartbeat
+$ echo heartbeat > blinkm-6-9-green/trigger
+$
+
+
+b) Sysfs group to control rgb, fade, hsb, scripts ...
+#####################################################
+
+This extended interface is available as folder blinkm
+in the sysfs folder of the I2C device.
+E.g. below /sys/bus/i2c/devices/6-0009/blinkm
+
+$ ls -h /sys/bus/i2c/devices/6-0009/blinkm/
+blue  green  red  test
+
+Currently supported is just setting red, green, blue
+and a test sequence.
+
+E.g.:
+
+$ cat *
+00
+00
+00
+#Write into test to start test sequence!#
+
+$ echo 1 > test
+$
+
+$ echo 255 > red
+$
+
+
+
+as of 6/2012
+
+dl9pf <at> gmx <dot> de
+

Documentation/leds/leds-lm3556.txt

View file

diff --git a/Documentation/leds/leds-lm3556.txt b/Documentation/leds/leds-lm3556.txt
new file mode 100644
index 0000000..d9eb91b
--- /dev/null
+++ b/Documentation/leds/leds-lm3556.txt
@@ -0,0 +1,85 @@
+Kernel driver for lm3556
+========================
+
+*Texas Instrument:
+ 1.5 A Synchronous Boost LED Flash Driver w/ High-Side Current Source
+* Datasheet: http://www.national.com/ds/LM/LM3556.pdf
+
+Authors:
+	Daniel Jeong
+	Contact:Daniel Jeong(daniel.jeong-at-ti.com, gshark.jeong-at-gmail.com)
+
+Description
+-----------
+There are 3 functions in LM3556, Flash, Torch and Indicator.
+
+FLASH MODE
+In Flash Mode, the LED current source(LED) provides 16 target current levels
+from 93.75 mA to 1500 mA.The Flash currents are adjusted via the CURRENT
+CONTROL REGISTER(0x09).Flash mode is activated by the ENABLE REGISTER(0x0A),
+or by pulling the STROBE pin HIGH.
+LM3556 Flash can be controlled through sys/class/leds/flash/brightness file
+* if STROBE pin is enabled, below example control brightness only, and
+ON / OFF will be controlled by STROBE pin.
+
+Flash Example:
+OFF     : #echo 0 > sys/class/leds/flash/brightness
+93.75 mA: #echo 1 > sys/class/leds/flash/brightness
+... .....
+1500  mA: #echo 16 > sys/class/leds/flash/brightness
+
+TORCH MODE
+In Torch Mode, the current source(LED) is programmed via the CURRENT CONTROL
+REGISTER(0x09).Torch Mode is activated by the ENABLE REGISTER(0x0A) or by the
+hardware TORCH input.
+LM3556 torch can be controlled through sys/class/leds/torch/brightness file.
+* if TORCH pin is enabled, below example control brightness only,
+and ON / OFF will be controlled by TORCH pin.
+
+Torch Example:
+OFF     : #echo 0 > sys/class/leds/torch/brightness
+46.88 mA: #echo 1 > sys/class/leds/torch/brightness
+... .....
+375 mA  : #echo 8 > sys/class/leds/torch/brightness
+
+INDICATOR MODE
+Indicator pattern can be set through sys/class/leds/indicator/pattern file,
+and 4 patterns are pre-defined in indicator_pattern array.
+According to N-lank, Pulse time and N Period values, different pattern wiill
+be generated.If you want new patterns for your own device, change
+indicator_pattern array with your own values and INDIC_PATTERN_SIZE.
+Please refer datasheet for more detail about N-Blank, Pulse time and N Period.
+
+Indicator pattern example:
+pattern 0: #echo 0 > sys/class/leds/indicator/pattern
+....
+pattern 3: #echo 3 > sys/class/leds/indicator/pattern
+
+Indicator brightness can be controlled through
+sys/class/leds/indicator/brightness file.
+
+Example:
+OFF      : #echo 0 > sys/class/leds/indicator/brightness
+5.86 mA  : #echo 1 > sys/class/leds/indicator/brightness
+........
+46.875mA : #echo 8 > sys/class/leds/indicator/brightness
+
+Notes
+-----
+Driver expects it is registered using the i2c_board_info mechanism.
+To register the chip at address 0x63 on specific adapter, set the platform data
+according to include/linux/platform_data/leds-lm3556.h, set the i2c board info
+
+Example:
+	static struct i2c_board_info __initdata board_i2c_ch4[]	= {
+		{
+			 I2C_BOARD_INFO(LM3556_NAME, 0x63),
+			 .platform_data = &lm3556_pdata,
+		 },
+	};
+
+and register it in the platform init function
+
+Example:
+	board_register_i2c_bus(4, 400,
+				board_i2c_ch4, ARRAY_SIZE(board_i2c_ch4));

Documentation/leds/ledtrig-oneshot.txt

View file

diff --git a/Documentation/leds/ledtrig-oneshot.txt b/Documentation/leds/ledtrig-oneshot.txt
new file mode 100644
index 0000000..07cd1fa
--- /dev/null
+++ b/Documentation/leds/ledtrig-oneshot.txt
@@ -0,0 +1,59 @@
+One-shot LED Trigger
+====================
+
+This is a LED trigger useful for signaling the user of an event where there are
+no clear trap points to put standard led-on and led-off settings.  Using this
+trigger, the application needs only to signal the trigger when an event has
+happened, than the trigger turns the LED on and than keeps it off for a
+specified amount of time.
+
+This trigger is meant to be usable both for sporadic and dense events.  In the
+first case, the trigger produces a clear single controlled blink for each
+event, while in the latter it keeps blinking at constant rate, as to signal
+that the events are arriving continuously.
+
+A one-shot LED only stays in a constant state when there are no events.  An
+additional "invert" property specifies if the LED has to stay off (normal) or
+on (inverted) when not rearmed.
+
+The trigger can be activated from user space on led class devices as shown
+below:
+
+  echo oneshot > trigger
+
+This adds the following sysfs attributes to the LED:
+
+  delay_on - specifies for how many milliseconds the LED has to stay at
+             LED_FULL brightness after it has been armed.
+             Default to 100 ms.
+
+  delay_off - specifies for how many milliseconds the LED has to stay at
+              LED_OFF brightness after it has been armed.
+              Default to 100 ms.
+
+  invert - reverse the blink logic.  If set to 0 (default) blink on for delay_on
+           ms, then blink off for delay_off ms, leaving the LED normally off.  If
+           set to 1, blink off for delay_off ms, then blink on for delay_on ms,
+           leaving the LED normally on.
+           Setting this value also immediately change the LED state.
+
+  shot - write any non-empty string to signal an events, this starts a blink
+         sequence if not already running.
+
+Example use-case: network devices, initialization:
+
+  echo oneshot > trigger # set trigger for this led
+  echo 33 > delay_on     # blink at 1 / (33 + 33) Hz on continuous traffic
+  echo 33 > delay_off
+
+interface goes up:
+
+  echo 1 > invert # set led as normally-on, turn the led on
+
+packet received/transmitted:
+
+  echo 1 > shot # led starts blinking, ignored if already blinking
+
+interface goes down
+
+  echo 0 > invert # set led as normally-off, turn the led off

MAINTAINERS

View file

diff --git a/MAINTAINERS b/MAINTAINERS
index 8f363b0..3bc4968 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1529,6 +1529,11 @@ W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	drivers/i2c/busses/i2c-bfin-twi.c
 
+BLINKM RGB LED DRIVER
+M:	Jan-Simon Moeller <[email protected]>
+S:	Maintained
+F:	drivers/leds/leds-blinkm.c
+
 BLOCK LAYER
 M:	Jens Axboe <[email protected]>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git

drivers/leds/Kconfig

View file

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 12b2b55..c96bbaa 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -200,6 +200,13 @@ config LEDS_LP5523
 	  Driver provides direct control via LED class and interface for
 	  programming the engines.
 
+config LEDS_LP8788
+	tristate "LED support for the TI LP8788 PMIC"
+	depends on LEDS_CLASS
+	depends on MFD_LP8788
+	help
+	  This option enables support for the Keyboard LEDs on the LP8788 PMIC.
+
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
 	depends on LEDS_CLASS
@@ -415,6 +422,14 @@ config LEDS_MAX8997
 	  This option enables support for on-chip LED drivers on
 	  MAXIM MAX8997 PMIC.
 
+config LEDS_LM3556
+	tristate "LED support for LM3556 Chip"
+	depends on LEDS_CLASS && I2C
+	select REGMAP_I2C
+	help
+	  This option enables support for LEDs connected to LM3556.
+	  LM3556 includes Torch, Flash and Indicator functions.
+
 config LEDS_OT200
 	tristate "LED support for the Bachmann OT200"
 	depends on LEDS_CLASS && HAS_IOMEM
@@ -422,6 +437,14 @@ config LEDS_OT200
 	  This option enables support for the LEDs on the Bachmann OT200.
 	  Say Y to enable LEDs on the Bachmann OT200.
 
+config LEDS_BLINKM
+	tristate "LED support for the BlinkM I2C RGB LED"
+	depends on LEDS_CLASS
+	depends on I2C
+	help
+	  This option enables support for the BlinkM RGB LED connected
+	  through I2C. Say Y to enable support for the BlinkM LED.
+
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
 	depends on LEDS_CLASS
@@ -443,6 +466,20 @@ config LEDS_TRIGGER_TIMER
 
 	  If unsure, say Y.
 
+config LEDS_TRIGGER_ONESHOT
+	tristate "LED One-shot Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to blink in one-shot pulses with parameters
+	  controlled via sysfs.  It's useful to notify the user on
+	  sporadic events, when there are no clear begin and end trap points,
+	  or on dense events, where this blinks the LED at constant rate if
+	  rearmed continuously.
+
+	  It also shows how to use the led_blink_set_oneshot() function.
+
+	  If unsure, say Y.
+
 config LEDS_TRIGGER_IDE_DISK
 	bool "LED IDE Disk Trigger"
 	depends on IDE_GD_ATA
@@ -497,7 +534,7 @@ config LEDS_TRIGGER_TRANSIENT
 	depends on LEDS_TRIGGERS
 	help
 	  This allows one time activation of a transient state on
-	  GPIO/PWM based hadrware.
+	  GPIO/PWM based hardware.
 	  If unsure, say Y.
 
 endif # NEW_LEDS

drivers/leds/Makefile

View file

diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index f8958cd..a4429a9 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
+obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
@@ -47,12 +48,15 @@ obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
 obj-$(CONFIG_LEDS_RENESAS_TPU)		+= leds-renesas-tpu.o
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
+obj-$(CONFIG_LEDS_LM3556)		+= leds-lm3556.o
+obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
 
 # LED Triggers
 obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+obj-$(CONFIG_LEDS_TRIGGER_ONESHOT)	+= ledtrig-oneshot.o
 obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
 obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
 obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o

drivers/leds/led-class.c

View file

diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index e663e6f..c599095 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -53,7 +53,7 @@ static ssize_t led_brightness_store(struct device *dev,
 
 	if (state == LED_OFF)
 		led_trigger_remove(led_cdev);
-	led_set_brightness(led_cdev, state);
+	__led_set_brightness(led_cdev, state);
 
 	return size;
 }
@@ -82,7 +82,12 @@ static void led_timer_function(unsigned long data)
 	unsigned long delay;
 
 	if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
-		led_set_brightness(led_cdev, LED_OFF);
+		__led_set_brightness(led_cdev, LED_OFF);
+		return;
+	}
+
+	if (led_cdev->flags & LED_BLINK_ONESHOT_STOP) {
+		led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
 		return;
 	}
 
@@ -100,7 +105,21 @@ static void led_timer_function(unsigned long data)
 		delay = led_cdev->blink_delay_off;
 	}
 
-	led_set_brightness(led_cdev, brightness);
+	__led_set_brightness(led_cdev, brightness);
+
+	/* Return in next iteration if led is in one-shot mode and we are in
+	 * the final blink state so that the led is toggled each delay_on +
+	 * delay_off milliseconds in worst case.
+	 */
+	if (led_cdev->flags & LED_BLINK_ONESHOT) {
+		if (led_cdev->flags & LED_BLINK_INVERT) {
+			if (brightness)
+				led_cdev->flags |= LED_BLINK_ONESHOT_STOP;
+		} else {
+			if (!brightness)
+				led_cdev->flags |= LED_BLINK_ONESHOT_STOP;
+		}
+	}
 
 	mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay));
 }
@@ -203,7 +222,7 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
 #endif
 
 	/* Stop blinking */
-	led_brightness_set(led_cdev, LED_OFF);
+	led_set_brightness(led_cdev, LED_OFF);
 
 	device_unregister(led_cdev->dev);
 

drivers/leds/led-core.c

View file

diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index d65353d..2ab05af 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -24,14 +24,6 @@ EXPORT_SYMBOL_GPL(leds_list_lock);
 LIST_HEAD(leds_list);
 EXPORT_SYMBOL_GPL(leds_list);
 
-static void led_stop_software_blink(struct led_classdev *led_cdev)
-{
-	/* deactivate previous settings */
-	del_timer_sync(&led_cdev->blink_timer);
-	led_cdev->blink_delay_on = 0;
-	led_cdev->blink_delay_off = 0;
-}
-
 static void led_set_software_blink(struct led_classdev *led_cdev,
 				   unsigned long delay_on,
 				   unsigned long delay_off)
@@ -53,7 +45,7 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
 
 	/* never off - just set to brightness */
 	if (!delay_off) {
-		led_set_brightness(led_cdev, led_cdev->blink_brightness);
+		__led_set_brightness(led_cdev, led_cdev->blink_brightness);
 		return;
 	}
 
@@ -61,13 +53,12 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
 }
 
 
-void led_blink_set(struct led_classdev *led_cdev,
-		   unsigned long *delay_on,
-		   unsigned long *delay_off)
+static void led_blink_setup(struct led_classdev *led_cdev,
+		     unsigned long *delay_on,
+		     unsigned long *delay_off)
 {
-	del_timer_sync(&led_cdev->blink_timer);
-
-	if (led_cdev->blink_set &&
+	if (!(led_cdev->flags & LED_BLINK_ONESHOT) &&
+	    led_cdev->blink_set &&
 	    !led_cdev->blink_set(led_cdev, delay_on, delay_off))
 		return;
 
@@ -77,12 +68,49 @@ void led_blink_set(struct led_classdev *led_cdev,
 
 	led_set_software_blink(led_cdev, *delay_on, *delay_off);
 }
+
+void led_blink_set(struct led_classdev *led_cdev,
+		   unsigned long *delay_on,
+		   unsigned long *delay_off)
+{
+	del_timer_sync(&led_cdev->blink_timer);
+
+	led_cdev->flags &= ~LED_BLINK_ONESHOT;
+	led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
+
+	led_blink_setup(led_cdev, delay_on, delay_off);
+}
 EXPORT_SYMBOL(led_blink_set);
 
-void led_brightness_set(struct led_classdev *led_cdev,
+void led_blink_set_oneshot(struct led_classdev *led_cdev,
+			   unsigned long *delay_on,
+			   unsigned long *delay_off,
+			   int invert)
+{
+	if ((led_cdev->flags & LED_BLINK_ONESHOT) &&
+	     timer_pending(&led_cdev->blink_timer))
+		return;
+
+	led_cdev->flags |= LED_BLINK_ONESHOT;
+	led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
+
+	if (invert)
+		led_cdev->flags |= LED_BLINK_INVERT;
+	else
+		led_cdev->flags &= ~LED_BLINK_INVERT;
+
+	led_blink_setup(led_cdev, delay_on, delay_off);
+}
+EXPORT_SYMBOL(led_blink_set_oneshot);
+
+void led_set_brightness(struct led_classdev *led_cdev,
 			enum led_brightness brightness)
 {
-	led_stop_software_blink(led_cdev);
-	led_cdev->brightness_set(led_cdev, brightness);
+	/* stop and clear soft-blink timer */
+	del_timer_sync(&led_cdev->blink_timer);
+	led_cdev->blink_delay_on = 0;
+	led_cdev->blink_delay_off = 0;
+
+	__led_set_brightness(led_cdev, brightness);
 }
-EXPORT_SYMBOL(led_brightness_set);
+EXPORT_SYMBOL(led_set_brightness);

drivers/leds/led-triggers.c

View file

diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 46b4c76..6157cbb 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -99,7 +99,7 @@ ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr,
 EXPORT_SYMBOL_GPL(led_trigger_show);
 
 /* Caller must ensure led_cdev->trigger_lock held */
-void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger)
+void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 {
 	unsigned long flags;
 
@@ -112,15 +112,15 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger)
 		if (led_cdev->trigger->deactivate)
 			led_cdev->trigger->deactivate(led_cdev);
 		led_cdev->trigger = NULL;
-		led_brightness_set(led_cdev, LED_OFF);
+		led_set_brightness(led_cdev, LED_OFF);
 	}
-	if (trigger) {
-		write_lock_irqsave(&trigger->leddev_list_lock, flags);
-		list_add_tail(&led_cdev->trig_list, &trigger->led_cdevs);
-		write_unlock_irqrestore(&trigger->leddev_list_lock, flags);
-		led_cdev->trigger = trigger;
-		if (trigger->activate)
-			trigger->activate(led_cdev);
+	if (trig) {
+		write_lock_irqsave(&trig->leddev_list_lock, flags);
+		list_add_tail(&led_cdev->trig_list, &trig->led_cdevs);
+		write_unlock_irqrestore(&trig->leddev_list_lock, flags);
+		led_cdev->trigger = trig;
+		if (trig->activate)
+			trig->activate(led_cdev);
 	}
 }
 EXPORT_SYMBOL_GPL(led_trigger_set);
@@ -153,24 +153,24 @@ EXPORT_SYMBOL_GPL(led_trigger_set_default);
 
 /* LED Trigger Interface */
 
-int led_trigger_register(struct led_trigger *trigger)
+int led_trigger_register(struct led_trigger *trig)
 {
 	struct led_classdev *led_cdev;
-	struct led_trigger *trig;
+	struct led_trigger *_trig;
 
-	rwlock_init(&trigger->leddev_list_lock);
-	INIT_LIST_HEAD(&trigger->led_cdevs);
+	rwlock_init(&trig->leddev_list_lock);
+	INIT_LIST_HEAD(&trig->led_cdevs);
 
 	down_write(&triggers_list_lock);
 	/* Make sure the trigger's name isn't already in use */
-	list_for_each_entry(trig, &trigger_list, next_trig) {
-		if (!strcmp(trig->name, trigger->name)) {
+	list_for_each_entry(_trig, &trigger_list, next_trig) {
+		if (!strcmp(_trig->name, trig->name)) {
 			up_write(&triggers_list_lock);
 			return -EEXIST;
 		}
 	}
 	/* Add to the list of led triggers */
-	list_add_tail(&trigger->next_trig, &trigger_list);
+	list_add_tail(&trig->next_trig, &trigger_list);