diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index 206686f..0b418d9 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -111,10 +111,17 @@ properties: - enum: - intel,socfpga-agilex5-socdk - intel,socfpga-agilex5-socdk-013b + - intel,socfpga-agilex5-socdk-debug - intel,socfpga-agilex5-socdk-modular - intel,socfpga-agilex5-socdk-nand - const: intel,socfpga-agilex5 + - description: Agilex7m boards + items: + - enum: + - altr,socfpga-agilex7m-socdk + - const: altr,socfpga-agilex7m + - description: SoCFPGA VT items: - const: altr,socfpga-vt diff --git a/Documentation/devicetree/bindings/arm/apple.yaml b/Documentation/devicetree/bindings/arm/apple.yaml index 5c2629e..e49403c 100644 --- a/Documentation/devicetree/bindings/arm/apple.yaml +++ b/Documentation/devicetree/bindings/arm/apple.yaml @@ -96,6 +96,13 @@ description: | - MacBook Pro (13-inch, M2, 2022) - Mac mini (M2, 2023) + Devices based on the "M3" SoC: + + - MacBook Air (13-inch, M3, 2024) + - MacBook Air (15-inch, M3, 2024) + - MacBook Pro (14-inch, M3, 2023) + - iMac (24-inch, M3, 2023) + Devices based on the "M1 Pro", "M1 Max" and "M1 Ultra" SoCs: - MacBook Pro (14-inch, M1 Pro, 2021) @@ -297,6 +304,17 @@ properties: - const: apple,t8112 - const: apple,arm-platform + - description: Apple M3 SoC based platforms + items: + - enum: + - apple,j433 # iMac (24-inch, 2x USB-C, M3, 2023) + - apple,j434 # iMac (24-inch, 4x USB-C, M3, 2023) + - apple,j504 # MacBook Pro (14-inch, M3, 2023) + - apple,j613 # MacBook Air (13-inch, M3, 2024) + - apple,j615 # MacBook Air (15-inch, M3, 2024) + - const: apple,t8122 + - const: apple,arm-platform + - description: Apple M1 Pro SoC based platforms items: - enum: diff --git a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml index b88f41a..c67b67b 100644 --- a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml +++ b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml @@ -36,7 +36,9 @@ properties: - const: syscon - const: simple-mfd - items: - - const: apple,t6020-pmgr + - enum: + - apple,t6020-pmgr + - apple,t8122-pmgr - const: apple,t8103-pmgr - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index 8ec7a3e..dd79969 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -95,6 +95,8 @@ properties: - facebook,greatlakes-bmc - facebook,harma-bmc - facebook,minerva-cmc + - facebook,rainiera6-bmc + - facebook,sanmiguel-bmc - facebook,santabarbara-bmc - facebook,yosemite4-bmc - facebook,yosemite5-bmc @@ -117,4 +119,10 @@ properties: - ufispace,ncplite-bmc - const: aspeed,ast2600 + - description: AST2700 based boards + items: + - enum: + - aspeed,ast2700-evb + - const: aspeed,ast2700 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 0023cd1..8687631 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -688,7 +688,7 @@ properties: - const: phytec,imx6ul-pcl063 # PHYTEC phyCORE-i.MX 6UL - const: fsl,imx6ul - - description: i.MX6UL Variscite VAR-SOM-MX6 Boards + - description: i.MX6UL Variscite VAR-SOM-6UL Boards items: - const: variscite,mx6ulconcerto - const: variscite,var-som-imx6ul @@ -797,6 +797,12 @@ properties: - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL - const: fsl,imx6ull + - description: i.MX6ULL Variscite VAR-SOM-6UL Boards + items: + - const: variscite,mx6ullconcerto # Variscite VAR-SOM-6UL dev kit board + - const: variscite,var-som-imx6ull # Variscite VAR-SOM-6UL SoM (6ULL variant) + - const: fsl,imx6ull + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules items: - enum: @@ -1025,6 +1031,7 @@ properties: - toradex,verdin-imx8mm-nonwifi-ivy # Verdin iMX8M Mini Module on Ivy - toradex,verdin-imx8mm-nonwifi-mallow # Verdin iMX8M Mini Module on Mallow - toradex,verdin-imx8mm-nonwifi-yavia # Verdin iMX8M Mini Module on Yavia + - toradex,verdin-imx8mm-nonwifi-zinnia # Verdin iMX8M Mini Module on Zinnia - const: toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Module without Wi-Fi / BT - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module - const: fsl,imx8mm @@ -1037,6 +1044,7 @@ properties: - toradex,verdin-imx8mm-wifi-ivy # Verdin iMX8M Mini Wi-Fi / BT Module on Ivy - toradex,verdin-imx8mm-wifi-mallow # Verdin iMX8M Mini Wi-Fi / BT Module on Mallow - toradex,verdin-imx8mm-wifi-yavia # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia + - toradex,verdin-imx8mm-wifi-zinnia # Verdin iMX8M Mini Wi-Fi / BT Module on Zinnia - const: toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Module - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module - const: fsl,imx8mm @@ -1271,6 +1279,7 @@ properties: - toradex,verdin-imx8mp-nonwifi-ivy # Verdin iMX8M Plus Module on Ivy - toradex,verdin-imx8mp-nonwifi-mallow # Verdin iMX8M Plus Module on Mallow - toradex,verdin-imx8mp-nonwifi-yavia # Verdin iMX8M Plus Module on Yavia + - toradex,verdin-imx8mp-nonwifi-zinnia # Verdin iMX8M Plus Module on Zinnia - const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module - const: fsl,imx8mp @@ -1283,6 +1292,7 @@ properties: - toradex,verdin-imx8mp-wifi-ivy # Verdin iMX8M Plus Wi-Fi / BT Module on Ivy - toradex,verdin-imx8mp-wifi-mallow # Verdin iMX8M Plus Wi-Fi / BT Module on Mallow - toradex,verdin-imx8mp-wifi-yavia # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia + - toradex,verdin-imx8mp-wifi-zinnia # Verdin iMX8M Plus Wi-Fi / BT Module on Zinnia - const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module - const: fsl,imx8mp @@ -1394,6 +1404,13 @@ properties: - fsl,imx8dxl-evk # i.MX8DXL EVK Board - const: fsl,imx8dxl + - description: SolidRun i.MX8DXL SoM based boards + items: + - enum: + - solidrun,imx8dxl-hummingboard-telematics # SolidRun i.MX8DXL SoM EVK Board + - const: solidrun,imx8dxl-sr-som + - const: fsl,imx8dxl + - description: i.MX8QXP/i.MX8DX Boards with Toradex Colibri iMX8X Modules items: - enum: @@ -1458,6 +1475,7 @@ properties: - description: i.MX91 based Boards items: - enum: + - fsl,imx91-9x9-qsb # i.MX91 9x9 QSB Board - fsl,imx91-11x11-evk # i.MX91 11x11 EVK Board - fsl,imx91-11x11-frdm # FRDM i.MX91 Development Board - fsl,imx91-11x11-frdm-s # FRDM i.MX91S Development Board @@ -1482,9 +1500,11 @@ properties: - description: i.MX95 based Boards items: - enum: + - fsl,imx95-15x15-ab2 # i.MX95 15x15 Audio Board V2 - fsl,imx95-15x15-evk # i.MX95 15x15 EVK Board - fsl,imx95-15x15-frdm # i.MX95 15x15 FRDM Board - fsl,imx95-19x19-evk # i.MX95 19x19 EVK Board + - fsl,imx95-19x19-frdm-pro # i.MX95 19x19 FRDM PRO Board - toradex,verdin-imx95-19x19-evk # i.MX95 Verdin Evaluation Kit (EVK) - const: fsl,imx95 @@ -1501,6 +1521,14 @@ properties: - const: phytec,imx95-phycore-fpsc # phyCORE-i.MX 95 FPSC - const: fsl,imx95 + - description: Toradex Boards with Aquila iMX95 Modules + items: + - enum: + - toradex,aquila-imx95-clover # Aquila iMX95 Module on Clover Board + - toradex,aquila-imx95-dev # Aquila iMX95 Module on Aquila Development Board + - const: toradex,aquila-imx95 # Aquila iMX95 Module + - const: fsl,imx95 + - description: Toradex Boards with SMARC iMX95 Modules items: - const: toradex,smarc-imx95-dev # Toradex SMARC iMX95 on Toradex SMARC Development Board @@ -1515,6 +1543,7 @@ properties: - toradex,verdin-imx95-nonwifi-ivy # Verdin iMX95 Module on Ivy - toradex,verdin-imx95-nonwifi-mallow # Verdin iMX95 Module on Mallow - toradex,verdin-imx95-nonwifi-yavia # Verdin iMX95 Module on Yavia + - toradex,verdin-imx95-nonwifi-zinnia # Verdin iMX95 Module on Zinnia - const: toradex,verdin-imx95-nonwifi # Verdin iMX95 Module without Wi-Fi / BT - const: toradex,verdin-imx95 # Verdin iMX95 Module - const: fsl,imx95 @@ -1527,6 +1556,7 @@ properties: - toradex,verdin-imx95-wifi-ivy # Verdin iMX95 Wi-Fi / BT Module on Ivy - toradex,verdin-imx95-wifi-mallow # Verdin iMX95 Wi-Fi / BT Module on Mallow - toradex,verdin-imx95-wifi-yavia # Verdin iMX95 Wi-Fi / BT Module on Yavia + - toradex,verdin-imx95-wifi-zinnia # Verdin iMX95 Wi-Fi / BT Module on Zinnia - const: toradex,verdin-imx95-wifi # Verdin iMX95 Wi-Fi / BT Module - const: toradex,verdin-imx95 # Verdin iMX95 Module - const: fsl,imx95 @@ -1614,6 +1644,18 @@ properties: - const: variscite,var-dart-mx91 # Variscite DART-MX91 SOM - const: fsl,imx91 + - description: Variscite VAR-SOM-MX91 based boards + items: + - const: variscite,var-som-mx91-symphony # Variscite VAR-SOM-MX91 on Symphony + - const: variscite,var-som-mx91 # Variscite VAR-SOM-MX91 + - const: fsl,imx91 + + - description: Variscite DART-MX93 based boards + items: + - const: variscite,var-dart-mx93-sonata # Variscite DART-MX93 on Sonata Development Board + - const: variscite,var-dart-mx93 # Variscite DART-MX93 SOM + - const: fsl,imx93 + - description: Variscite VAR-SOM-MX93 based boards items: - const: variscite,var-som-mx93-symphony @@ -1868,6 +1910,7 @@ properties: - enum: - solidrun,clearfog-cx - solidrun,honeycomb + - solidrun,twins-single - const: solidrun,lx2160a-cex7 - const: fsl,lx2160a diff --git a/Documentation/devicetree/bindings/arm/gemini.yaml b/Documentation/devicetree/bindings/arm/gemini.yaml index fc09296..dfb1124 100644 --- a/Documentation/devicetree/bindings/arm/gemini.yaml +++ b/Documentation/devicetree/bindings/arm/gemini.yaml @@ -55,6 +55,11 @@ properties: - const: itian,sq201 - const: cortina,gemini + - description: Raidsonic NAS IB-4210-B + items: + - const: raidsonic,ib-4210-b + - const: cortina,gemini + - description: Raidsonic NAS IB-4220-B items: - const: raidsonic,ib-4220-b @@ -70,6 +75,11 @@ properties: - const: teltonika,rut1xx - const: cortina,gemini + - description: Verbatim S08V1901-D1 NAS + items: + - const: verbatim,s08v1901-d1 + - const: cortina,gemini + - description: Wiligear Wiliboard WBD-111 items: - const: wiligear,wiliboard-wbd111 diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index b494312..50cc18a 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -79,6 +79,7 @@ properties: - items: - enum: - fairphone,fp6 + - nothing,asteroids - const: qcom,milos - items: @@ -367,6 +368,11 @@ properties: - items: - enum: + - qcom,ipq9650-rdp488 + - const: qcom,ipq9650 + + - items: + - enum: - qcom,kaanapali-mtp - qcom,kaanapali-qrd - const: qcom,kaanapali @@ -822,6 +828,14 @@ properties: - const: google,zombie-sku514 - const: qcom,sc7280 + - description: Xiaomi Poco F1 + items: + - enum: + - xiaomi,beryllium-ebbg + - xiaomi,beryllium-tianma + - const: xiaomi,beryllium + - const: qcom,sdm845 + - items: - enum: - lenovo,flex-5g @@ -972,8 +986,6 @@ properties: - sony,akatsuki-row - sony,apollo-row - thundercomm,db845c - - xiaomi,beryllium - - xiaomi,beryllium-ebbg - xiaomi,polaris - const: qcom,sdm845 @@ -1040,6 +1052,7 @@ properties: - items: - enum: + - motorola,dubai - nothing,spacewar - const: qcom,sm7325 @@ -1169,6 +1182,10 @@ properties: - const: qcom,x1e80100 - items: + - const: microsoft,surface-pro-12in + - const: qcom,x1p42100 + + - items: - enum: - qcom,purwa-iot-evk - const: qcom,purwa-iot-som diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml index dcd1c53..dd1f637 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml @@ -16,6 +16,7 @@ properties: - nvidia,tegra186-pmc - nvidia,tegra194-pmc - nvidia,tegra234-pmc + - nvidia,tegra238-pmc - nvidia,tegra264-pmc reg: @@ -76,6 +77,7 @@ allOf: contains: enum: - nvidia,tegra234-pmc + - nvidia,tegra238-pmc - nvidia,tegra264-pmc then: properties: diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 2a6a944..69b5441 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -97,6 +97,13 @@ properties: - const: toradex,verdin-am62 # Verdin AM62 Module - const: ti,am625 + - description: K3 AM625 SoC on TQ-Systems TQMa62xx SoM + items: + - enum: + - tq,am625-tqma6254-mba62xx # MBa62xx base board + - const: tq,am625-tqma6254 + - const: ti,am625 + - description: K3 AM62P5 SoC Toradex Verdin Modules and Carrier Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml new file mode 100644 index 0000000..f028d2c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/zte.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/zte.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ZTE zx platforms + +maintainers: + - Stefan Dösinger + +description: | + ARM platforms using SoCs designed by ZTE. Currently this supports devices + based on the zx297520v3 SoC which is found in LTE routers. + +properties: + $nodename: + const: "/" + compatible: + oneOf: + - items: + - enum: + - dlink,dwr932m + - const: zte,zx297520v3 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml index 00bbde2..4808065 100644 --- a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml +++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml @@ -26,8 +26,10 @@ select: compatible: contains: enum: + - fsl,aipi-bus - fsl,aips - fsl,emi + - fsl,emi-bus - fsl,spba-bus required: - compatible @@ -39,8 +41,10 @@ properties: compatible: items: - enum: + - fsl,aipi-bus - fsl,aips - fsl,emi + - fsl,emi-bus - fsl,spba-bus - const: simple-bus diff --git a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml index d416c37..ceeaa8f 100644 --- a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml +++ b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml @@ -11,14 +11,19 @@ maintainers: description: | The CS2000-CP is an extremely versatile system clocking device that - utilizes a programmable phase lock loop. + utilizes a programmable phase lock loop. CS2500 is a compatible + drop-in replacement for CS2000-CP. Link: https://www.cirrus.com/products/cs2000/ + Link: https://www.cirrus.com/products/cs2500/ properties: compatible: - enum: - - cirrus,cs2000-cp + oneOf: + - items: + - const: cirrus,cs2500 + - const: cirrus,cs2000-cp + - const: cirrus,cs2000-cp clocks: description: diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9650-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9650-gcc.yaml new file mode 100644 index 0000000..f331052 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9650-gcc.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,ipq9650-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on IPQ9650 + +maintainers: + - Bjorn Andersson + - Kathiravan Thirumoorthy + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on IPQ9650 + + See also: + include/dt-bindings/clock/qcom,ipq9650-gcc.h + include/dt-bindings/reset/qcom,ipq9650-gcc.h + +properties: + compatible: + const: qcom,ipq9650-gcc + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PCIE30 PHY0 pipe clock source + - description: PCIE30 PHY1 pipe clock source + - description: PCIE30 PHY2 pipe clock source + - description: PCIE30 PHY3 pipe clock source + - description: PCIE30 PHY4 pipe clock source + - description: USB PCIE wrapper pipe clock source + - description: NSS common clock source + + '#power-domain-cells': false + + '#interconnect-cells': + const: 1 + +required: + - compatible + - clocks + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + clock-controller@1800000 { + compatible = "qcom,ipq9650-gcc"; + reg = <0x01800000 0x40000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&pcie30_phy0_pipe_clk>, + <&pcie30_phy1_pipe_clk>, + <&pcie30_phy2_pipe_clk>, + <&pcie30_phy3_pipe_clk>, + <&pcie30_phy4_pipe_clk>, + <&usb3phy_0_cc_pipe_clk>, + <&nss_cmn_clk>; + #clock-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml index a0e09b7..703b5bf 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml @@ -41,7 +41,7 @@ properties: clock-output-names: minItems: 3 - maxItems: 17 + maxItems: 19 renesas,mode: description: Board-specific settings of the MD_CK* bits on R-Mobile A1 @@ -90,6 +90,8 @@ allOf: - const: zx - const: zs - const: hp + - const: ztr + - const: zt - if: properties: @@ -123,6 +125,8 @@ allOf: - const: zb - const: m3 - const: cp + - const: ztr + - const: zt required: - renesas,mode @@ -240,6 +244,6 @@ examples: #clock-cells = <1>; clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b", "m1", "hp", "hpp", - "usbp", "s", "zb", "m3", "cp"; + "usbp", "s", "zb", "m3", "cp", "ztr", "zt"; renesas,mode = <0x05>; }; diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 0363201..3c727e4 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -39,6 +39,7 @@ properties: - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - ti,sn75lvds93 # For the TI SN75LVDS93 FlatLink transmitter - const: lvds-encoder # Generic LVDS encoder compatible fallback - items: - enum: diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index e026722..decc43d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -73,6 +73,7 @@ properties: - allwinner,sun20i-d1-plic - sophgo,cv1800b-plic - sophgo,cv1812h-plic + - sophgo,sg2000-plic - sophgo,sg2002-plic - sophgo,sg2042-plic - sophgo,sg2044-plic diff --git a/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml b/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml index d4838c3..f83efb3 100644 --- a/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml @@ -32,22 +32,35 @@ properties: # should be specified along with 'reg' property providing MMIO location. compatible: oneOf: - - items: + - description: Platform (non-PCIe) IOMMU implementations + items: - enum: - qemu,riscv-iommu + - tenstorrent,riscv-iommu - const: riscv,iommu - - items: + - description: PCIe IOMMU implementations + items: - enum: - pci1efd,edf1 - const: riscv,pci-iommu reg: - maxItems: 1 - description: - For non-PCI devices this represents base address and size of for the - IOMMU memory mapped registers interface. - For PCI IOMMU hardware implementation this should represent an address - of the IOMMU, as defined in the PCI Bus Binding reference. + minItems: 1 + items: + - description: + For non-PCI devices, base address and size of the IOMMU memory + mapped registers interface. For PCI IOMMU hardware + implementation, an address of the IOMMU, as defined in the PCI + Bus Binding reference. + - description: + Region containing platform specific MMRs for machine-mode + configuration, such as PMA and PMP registers. + + reg-names: + minItems: 1 + items: + - const: base + - const: machine '#iommu-cells': const: 1 @@ -75,6 +88,26 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - tenstorrent,riscv-iommu + then: + properties: + reg: + minItems: 2 + reg-names: + minItems: 2 + else: + properties: + reg: + maxItems: 1 + reg-names: + maxItems: 1 + examples: - |+ /* Example 1 (IOMMU device with wired interrupts) */ @@ -145,3 +178,13 @@ examples: }; }; }; + + - |+ + /* Example 5 (Tenstorrent IOMMU device with MSIs) */ + iommu5: iommu@d2020000 { + compatible = "tenstorrent,riscv-iommu", "riscv,iommu"; + reg = <0xd2020000 0x10000>, <0xaa000000 0x10000>; + reg-names = "base", "machine"; + msi-parent = <&imsics_smode>; + #iommu-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml index 1aa5775..978ef2d 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml @@ -40,6 +40,12 @@ properties: resets: maxItems: 1 + interconnects: + maxItems: 1 + + interconnect-names: + const: dma-mem + port: $ref: /schemas/graph.yaml#/$defs/port-base description: Parallel input port, connect to a parallel sensor diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml index 3ea4a42..c0d7acc 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml @@ -36,6 +36,12 @@ properties: resets: maxItems: 1 + interconnects: + maxItems: 1 + + interconnect-names: + const: dma-mem + ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml index f5f03bf..9398aae 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml @@ -16,7 +16,9 @@ description: | properties: compatible: - const: nvidia,tegra124-emc + enum: + - nvidia,tegra114-emc + - nvidia,tegra124-emc reg: maxItems: 1 @@ -29,6 +31,9 @@ properties: items: - const: emc + interrupts: + maxItems: 1 + "#interconnect-cells": const: 0 @@ -164,153 +169,12 @@ patternProperties: nvidia,emc-configuration: description: EMC timing characterization data. These are the registers (see - section "15.6.2 EMC Registers" in the TRM) whose values need to + section "20.11.2 EMC Registers" in the Tegra114 TRM or section + "15.6.2 EMC Registers" in the Tegra124 TRM) whose values need to be specified, according to the board documentation. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - - description: EMC_RC - - description: EMC_RFC - - description: EMC_RFC_SLR - - description: EMC_RAS - - description: EMC_RP - - description: EMC_R2W - - description: EMC_W2R - - description: EMC_R2P - - description: EMC_W2P - - description: EMC_RD_RCD - - description: EMC_WR_RCD - - description: EMC_RRD - - description: EMC_REXT - - description: EMC_WEXT - - description: EMC_WDV - - description: EMC_WDV_MASK - - description: EMC_QUSE - - description: EMC_QUSE_WIDTH - - description: EMC_IBDLY - - description: EMC_EINPUT - - description: EMC_EINPUT_DURATION - - description: EMC_PUTERM_EXTRA - - description: EMC_PUTERM_WIDTH - - description: EMC_PUTERM_ADJ - - description: EMC_CDB_CNTL_1 - - description: EMC_CDB_CNTL_2 - - description: EMC_CDB_CNTL_3 - - description: EMC_QRST - - description: EMC_QSAFE - - description: EMC_RDV - - description: EMC_RDV_MASK - - description: EMC_REFRESH - - description: EMC_BURST_REFRESH_NUM - - description: EMC_PRE_REFRESH_REQ_CNT - - description: EMC_PDEX2WR - - description: EMC_PDEX2RD - - description: EMC_PCHG2PDEN - - description: EMC_ACT2PDEN - - description: EMC_AR2PDEN - - description: EMC_RW2PDEN - - description: EMC_TXSR - - description: EMC_TXSRDLL - - description: EMC_TCKE - - description: EMC_TCKESR - - description: EMC_TPD - - description: EMC_TFAW - - description: EMC_TRPAB - - description: EMC_TCLKSTABLE - - description: EMC_TCLKSTOP - - description: EMC_TREFBW - - description: EMC_FBIO_CFG6 - - description: EMC_ODT_WRITE - - description: EMC_ODT_READ - - description: EMC_FBIO_CFG5 - - description: EMC_CFG_DIG_DLL - - description: EMC_CFG_DIG_DLL_PERIOD - - description: EMC_DLL_XFORM_DQS0 - - description: EMC_DLL_XFORM_DQS1 - - description: EMC_DLL_XFORM_DQS2 - - description: EMC_DLL_XFORM_DQS3 - - description: EMC_DLL_XFORM_DQS4 - - description: EMC_DLL_XFORM_DQS5 - - description: EMC_DLL_XFORM_DQS6 - - description: EMC_DLL_XFORM_DQS7 - - description: EMC_DLL_XFORM_DQS8 - - description: EMC_DLL_XFORM_DQS9 - - description: EMC_DLL_XFORM_DQS10 - - description: EMC_DLL_XFORM_DQS11 - - description: EMC_DLL_XFORM_DQS12 - - description: EMC_DLL_XFORM_DQS13 - - description: EMC_DLL_XFORM_DQS14 - - description: EMC_DLL_XFORM_DQS15 - - description: EMC_DLL_XFORM_QUSE0 - - description: EMC_DLL_XFORM_QUSE1 - - description: EMC_DLL_XFORM_QUSE2 - - description: EMC_DLL_XFORM_QUSE3 - - description: EMC_DLL_XFORM_QUSE4 - - description: EMC_DLL_XFORM_QUSE5 - - description: EMC_DLL_XFORM_QUSE6 - - description: EMC_DLL_XFORM_QUSE7 - - description: EMC_DLL_XFORM_ADDR0 - - description: EMC_DLL_XFORM_ADDR1 - - description: EMC_DLL_XFORM_ADDR2 - - description: EMC_DLL_XFORM_ADDR3 - - description: EMC_DLL_XFORM_ADDR4 - - description: EMC_DLL_XFORM_ADDR5 - - description: EMC_DLL_XFORM_QUSE8 - - description: EMC_DLL_XFORM_QUSE9 - - description: EMC_DLL_XFORM_QUSE10 - - description: EMC_DLL_XFORM_QUSE11 - - description: EMC_DLL_XFORM_QUSE12 - - description: EMC_DLL_XFORM_QUSE13 - - description: EMC_DLL_XFORM_QUSE14 - - description: EMC_DLL_XFORM_QUSE15 - - description: EMC_DLI_TRIM_TXDQS0 - - description: EMC_DLI_TRIM_TXDQS1 - - description: EMC_DLI_TRIM_TXDQS2 - - description: EMC_DLI_TRIM_TXDQS3 - - description: EMC_DLI_TRIM_TXDQS4 - - description: EMC_DLI_TRIM_TXDQS5 - - description: EMC_DLI_TRIM_TXDQS6 - - description: EMC_DLI_TRIM_TXDQS7 - - description: EMC_DLI_TRIM_TXDQS8 - - description: EMC_DLI_TRIM_TXDQS9 - - description: EMC_DLI_TRIM_TXDQS10 - - description: EMC_DLI_TRIM_TXDQS11 - - description: EMC_DLI_TRIM_TXDQS12 - - description: EMC_DLI_TRIM_TXDQS13 - - description: EMC_DLI_TRIM_TXDQS14 - - description: EMC_DLI_TRIM_TXDQS15 - - description: EMC_DLL_XFORM_DQ0 - - description: EMC_DLL_XFORM_DQ1 - - description: EMC_DLL_XFORM_DQ2 - - description: EMC_DLL_XFORM_DQ3 - - description: EMC_DLL_XFORM_DQ4 - - description: EMC_DLL_XFORM_DQ5 - - description: EMC_DLL_XFORM_DQ6 - - description: EMC_DLL_XFORM_DQ7 - - description: EMC_XM2CMDPADCTRL - - description: EMC_XM2CMDPADCTRL4 - - description: EMC_XM2CMDPADCTRL5 - - description: EMC_XM2DQPADCTRL2 - - description: EMC_XM2DQPADCTRL3 - - description: EMC_XM2CLKPADCTRL - - description: EMC_XM2CLKPADCTRL2 - - description: EMC_XM2COMPPADCTRL - - description: EMC_XM2VTTGENPADCTRL - - description: EMC_XM2VTTGENPADCTRL2 - - description: EMC_XM2VTTGENPADCTRL3 - - description: EMC_XM2DQSPADCTRL3 - - description: EMC_XM2DQSPADCTRL4 - - description: EMC_XM2DQSPADCTRL5 - - description: EMC_XM2DQSPADCTRL6 - - description: EMC_DSR_VTTGEN_DRV - - description: EMC_TXDSRVTTGEN - - description: EMC_FBIO_SPARE - - description: EMC_ZCAL_WAIT_CNT - - description: EMC_MRS_WAIT_CNT2 - - description: EMC_CTT - - description: EMC_CTT_DURATION - - description: EMC_CFG_PIPE - - description: EMC_DYN_SELF_REF_CONTROL - - description: EMC_QPOP + minItems: 97 + maxItems: 143 required: - clock-frequency @@ -318,9 +182,7 @@ patternProperties: - nvidia,emc-auto-cal-config2 - nvidia,emc-auto-cal-config3 - nvidia,emc-auto-cal-interval - - nvidia,emc-bgbias-ctl0 - nvidia,emc-cfg - - nvidia,emc-cfg-2 - nvidia,emc-ctt-term-ctrl - nvidia,emc-mode-1 - nvidia,emc-mode-2 @@ -344,6 +206,22 @@ required: - "#interconnect-cells" - operating-points-v2 +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra124-emc + then: + patternProperties: + "^emc-timings-[0-9]+$": + patternProperties: + "^timing-[0-9]+$": + required: + - nvidia,emc-bgbias-ctl0 + - nvidia,emc-cfg-2 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml index 7b18b4d..f8747ce 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml @@ -19,7 +19,9 @@ description: | properties: compatible: - const: nvidia,tegra124-mc + enum: + - nvidia,tegra114-mc + - nvidia,tegra124-mc reg: maxItems: 1 @@ -64,29 +66,12 @@ patternProperties: nvidia,emem-configuration: $ref: /schemas/types.yaml#/definitions/uint32-array - description: | + description: Values to be written to the EMEM register block. See section - "15.6.1 MC Registers" in the TRM. - items: - - description: MC_EMEM_ARB_CFG - - description: MC_EMEM_ARB_OUTSTANDING_REQ - - description: MC_EMEM_ARB_TIMING_RCD - - description: MC_EMEM_ARB_TIMING_RP - - description: MC_EMEM_ARB_TIMING_RC - - description: MC_EMEM_ARB_TIMING_RAS - - description: MC_EMEM_ARB_TIMING_FAW - - description: MC_EMEM_ARB_TIMING_RRD - - description: MC_EMEM_ARB_TIMING_RAP2PRE - - description: MC_EMEM_ARB_TIMING_WAP2PRE - - description: MC_EMEM_ARB_TIMING_R2R - - description: MC_EMEM_ARB_TIMING_W2W - - description: MC_EMEM_ARB_TIMING_R2W - - description: MC_EMEM_ARB_TIMING_W2R - - description: MC_EMEM_ARB_DA_TURNS - - description: MC_EMEM_ARB_DA_COVERS - - description: MC_EMEM_ARB_MISC0 - - description: MC_EMEM_ARB_MISC1 - - description: MC_EMEM_ARB_RING1_THROTTLE + "20.11.1 MC Registers" in the Tegea114 TRM or + "15.6.1 MC Registers" in the Tegra124 TRM. + minItems: 18 + maxItems: 19 required: - clock-frequency diff --git a/Documentation/devicetree/bindings/net/bluetooth/qcom,wcn6855-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/qcom,wcn6855-bt.yaml index 4563006..0beda26 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qcom,wcn6855-bt.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qcom,wcn6855-bt.yaml @@ -50,9 +50,6 @@ properties: description: VDD_RFA_1P7 supply regulator handle deprecated: true - vddrfa1p8-supply: - description: VDD_RFA_1P8 supply regulator handle - vddrfacmn-supply: description: VDD_RFA_CMN supply regulator handle @@ -68,7 +65,7 @@ required: - vddbtcmx-supply - vddrfa0p8-supply - vddrfa1p2-supply - - vddrfa1p8-supply + - vddrfa1p7-supply - vddrfacmn-supply - vddwlcx-supply - vddwlmx-supply @@ -91,7 +88,7 @@ examples: vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 00c0524..fb1fe1e 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -26,6 +26,7 @@ properties: - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} - renesas,r9a08g045-pinctrl # RZ/G3S + - renesas,r9a08g046-pinctrl # RZ/G3L - renesas,r9a09g047-pinctrl # RZ/G3E - renesas,r9a09g056-pinctrl # RZ/V2N - renesas,r9a09g057-pinctrl # RZ/V2H(P) @@ -78,6 +79,26 @@ properties: - description: PFC main reset - description: Reset for the control register related to WDTUDFCA and WDTUDFFCM pins + reset-names: + oneOf: + - items: + - const: rstn + - const: port + - const: spare + - items: + - const: main + - const: error + + renesas,clonech: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to system controller + - description: offset of clone channel control register + description: + Phandle and offset to the system controller containing the clone channel + control values. + additionalProperties: anyOf: - type: object @@ -144,6 +165,15 @@ allOf: properties: compatible: contains: + const: renesas,r9a08g046-pinctrl + then: + required: + - renesas,clonech + + - if: + properties: + compatible: + contains: enum: - renesas,r9a09g047-pinctrl - renesas,r9a09g056-pinctrl @@ -152,10 +182,14 @@ allOf: properties: resets: maxItems: 2 + reset-names: + maxItems: 2 else: properties: resets: minItems: 3 + reset-names: + minItems: 3 required: - compatible @@ -187,6 +221,7 @@ examples: resets = <&cpg R9A07G044_GPIO_RSTN>, <&cpg R9A07G044_GPIO_PORT_RESETN>, <&cpg R9A07G044_GPIO_SPARE_RESETN>; + reset-names = "rstn", "port", "spare"; power-domains = <&cpg>; scif0_pins: serial0 { diff --git a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml index caf1518..c9be097 100644 --- a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml +++ b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml @@ -43,7 +43,9 @@ properties: - apple,t6000-pmgr-pwrstate - const: apple,pmgr-pwrstate - items: - - const: apple,t6020-pmgr-pwrstate + - enum: + - apple,t6020-pmgr-pwrstate + - apple,t8122-pmgr-pwrstate - const: apple,t8103-pmgr-pwrstate reg: diff --git a/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml b/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml index d8f4f9f..25ef04b 100644 --- a/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml +++ b/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml @@ -18,6 +18,7 @@ properties: - enum: - apple,t8103-fpwm - apple,t8112-fpwm + - apple,t8122-fpwm - apple,t6000-fpwm - apple,t6020-fpwm - const: apple,s5l-fpwm diff --git a/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml index 4380f62..6efadc5 100644 --- a/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml +++ b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Tegra CPU-NS - BPMP IPC reserved memory maintainers: - - Peter De Schrijver + - Thierry Reding + - Jonathan Hunter description: | Define a memory region used for communication between CPU-NS and BPMP. diff --git a/Documentation/devicetree/bindings/riscv/spacemit.yaml b/Documentation/devicetree/bindings/riscv/spacemit.yaml index b958b94..311bbcc 100644 --- a/Documentation/devicetree/bindings/riscv/spacemit.yaml +++ b/Documentation/devicetree/bindings/riscv/spacemit.yaml @@ -29,8 +29,14 @@ properties: - const: spacemit,k1 - items: - enum: + - deepcomputing,fml13v05 - spacemit,k3-pico-itx - const: spacemit,k3 + - items: + - enum: + - spacemit,k3-com260-ifx + - const: spacemit,k3-com260 + - const: spacemit,k3 additionalProperties: true diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,r8a78000-mfis.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,r8a78000-mfis.yaml new file mode 100644 index 0000000..eef8c0a --- /dev/null +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,r8a78000-mfis.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,r8a78000-mfis.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas MFIS (Multifunctional Interface) controller + +maintainers: + - Wolfram Sang + +description: + The Renesas Multifunctional Interface (MFIS) provides various functionality + like mailboxes, hardware spinlocks, product identification, error injection, + error detection and such. Parts of it can be used for communication between + different CPU cores. Those cores can be in various domains like AP, RT, or + SCP. Often multiple domain-specific MFIS instances exist in one SoC. + +properties: + compatible: + enum: + - renesas,r8a78000-mfis # R-Car X5H (AP<->AP, with PRR) + - renesas,r8a78000-mfis-scp # R-Car X5H (AP<->SCP, without PRR) + + reg: + maxItems: 2 + + reg-names: + items: + - const: common + - const: mboxes + + interrupts: + minItems: 32 + maxItems: 128 + description: + The interrupts raised by the remote doorbells. + + interrupt-names: + minItems: 32 + maxItems: 128 + description: + An interrupt name is constructed with the prefix 'ch'. Then, the + channel number as specified in the documentation of the SoC. Finally, + the letter 'i' if the interrupt is raised by the IICR register. Or 'e' + if it is raised by the EICR register. + + "#hwlock-cells": + const: 1 + + "#mbox-cells": + const: 2 + description: + The first cell is the channel number as specified in the documentation + of the SoC. The second cell may specify flags as described in the file + . + +allOf: + - if: + properties: + compatible: + contains: + const: renesas,r8a78000-mfis + then: + properties: + interrupts: + minItems: 128 + interrupt-names: + minItems: 128 + items: + pattern: "^ch[0-9]+[ie]$" + + - if: + properties: + compatible: + contains: + const: renesas,r8a78000-mfis-scp + then: + properties: + interrupts: + maxItems: 32 + interrupt-names: + maxItems: 32 + items: + pattern: "^ch[0-9]+i$" + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - "#hwlock-cells" + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include + system-controller@189e0000 { + compatible = "renesas,r8a78000-mfis"; + reg = <0x189e0000 0x1000>, <0x18800000 0x40000>; + reg-names = "common", "mboxes"; + interrupts = , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , ; + interrupt-names = "ch0i", "ch0e", "ch1i", "ch1e", "ch2i", "ch2e", "ch3i", "ch3e", + "ch4i", "ch4e", "ch5i", "ch5e", "ch6i", "ch6e", "ch7i", "ch7e", + "ch8i", "ch8e", "ch9i", "ch9e", "ch10i", "ch10e", "ch11i", "ch11e", + "ch12i", "ch12e", "ch13i", "ch13e", "ch14i", "ch14e", "ch15i", "ch15e", + "ch16i", "ch16e", "ch17i", "ch17e", "ch18i", "ch18e", "ch19i", "ch19e", + "ch20i", "ch20e", "ch21i", "ch21e", "ch22i", "ch22e", "ch23i", "ch23e", + "ch24i", "ch24e", "ch25i", "ch25e", "ch26i", "ch26e", "ch27i", "ch27e", + "ch28i", "ch28e", "ch29i", "ch29e", "ch30i", "ch30e", "ch31i", "ch31e", + "ch32i", "ch32e", "ch33i", "ch33e", "ch34i", "ch34e", "ch35i", "ch35e", + "ch36i", "ch36e", "ch37i", "ch37e", "ch38i", "ch38e", "ch39i", "ch39e", + "ch40i", "ch40e", "ch41i", "ch41e", "ch42i", "ch42e", "ch43i", "ch43e", + "ch44i", "ch44e", "ch45i", "ch45e", "ch46i", "ch46e", "ch47i", "ch47e", + "ch48i", "ch48e", "ch49i", "ch49e", "ch50i", "ch50e", "ch51i", "ch51e", + "ch52i", "ch52e", "ch53i", "ch53e", "ch54i", "ch54e", "ch55i", "ch55e", + "ch56i", "ch56e", "ch57i", "ch57e", "ch58i", "ch58e", "ch59i", "ch59e", + "ch60i", "ch60e", "ch61i", "ch61e", "ch62i", "ch62e", "ch63i", "ch63e"; + #hwlock-cells = <1>; + #mbox-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index 5c22c51..eeef34e 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -473,6 +473,12 @@ properties: - const: renesas,r8a779mb - const: renesas,r8a7795 + - description: R-Car M3Le (R8A779MD) + items: + - const: renesas,geist # M3Le Geist (RTP8A779MDASKB0F10S) + - const: renesas,r8a779md + - const: renesas,r8a77965 + - description: R-Car X5H (R8A78000) items: - enum: diff --git a/Documentation/devicetree/bindings/soc/sophgo/sophgo.yaml b/Documentation/devicetree/bindings/soc/sophgo/sophgo.yaml index 1c50261..0b6fbab 100644 --- a/Documentation/devicetree/bindings/soc/sophgo/sophgo.yaml +++ b/Documentation/devicetree/bindings/soc/sophgo/sophgo.yaml @@ -33,6 +33,10 @@ properties: - const: sophgo,sg2000 - items: - enum: + - milkv,duo-s + - const: sophgo,sg2000 + - items: + - enum: - sipeed,licheerv-nano-b - const: sipeed,licheerv-nano - const: sophgo,sg2002 diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index 67cea8e..105e3ef 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -52,6 +52,7 @@ properties: - allwinner,sun20i-d1-clint - sophgo,cv1800b-clint - sophgo,cv1812h-clint + - sophgo,sg2000-clint - sophgo,sg2002-clint - thead,th1520-clint - const: thead,c900-clint diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 5815d19..09c7a6a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1787,6 +1787,8 @@ patternProperties: description: Variscite Ltd. "^vdl,.*": description: Van der Laan b.v. + "^verbatim,.*": + description: Verbatim Corporation "^verisilicon,.*": description: VeriSilicon Microelectronics (Shanghai) Co., Ltd. "^vertexcom,.*": diff --git a/MAINTAINERS b/MAINTAINERS index 8f5ed86..daa1f7c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2639,6 +2639,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux.git F: Documentation/devicetree/bindings/arm/aspeed/ F: arch/arm/boot/dts/aspeed/ F: arch/arm/mach-aspeed/ +F: arch/arm64/boot/dts/aspeed/ N: aspeed ARM/AXIADO ARCHITECTURE @@ -3456,9 +3457,12 @@ F: drivers/i2c/busses/i2c-rk3x.c F: drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c F: sound/soc/rockchip/ N: rockchip +K: \b[Rr]ock[Cc]hip\b +K: (?:\b|_)ROCKCHIP(?:\b|_) ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES M: Krzysztof Kozlowski +M: Peter Griffin R: Alim Akhtar L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org @@ -23951,6 +23955,7 @@ SAMSUNG SOC CLOCK DRIVERS M: Krzysztof Kozlowski M: Sylwester Nawrocki M: Chanwoo Choi +M: Peter Griffin R: Alim Akhtar L: linux-samsung-soc@vger.kernel.org S: Maintained @@ -25088,7 +25093,7 @@ F: drivers/char/sonypi.c F: drivers/platform/x86/sony-laptop.c SOPHGO DEVICETREES and DRIVERS -M: Chen Wang +M: Chen Wang M: Inochi Amaoto L: sophgo@lists.linux.dev W: https://github.com/sophgo/linux/wiki diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index efe38eb..28fba53 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -39,3 +39,4 @@ subdir-y += unisoc subdir-y += vt8500 subdir-y += xen subdir-y += xilinx +subdir-y += zte diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi index 6f88d87..cc107c6 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi @@ -1062,6 +1062,49 @@ clock-names = "bus", "mod", "ram"; resets = <&ccu RST_BUS_CSI>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csi_in_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_out_csi>; + }; + }; + }; + }; + + mipi_csi2: csi@1cb1000 { + compatible = "allwinner,sun8i-a83t-mipi-csi2"; + reg = <0x01cb1000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_MIPI_CSI>, + <&ccu CLK_CSI_MISC>; + clock-names = "bus", "mod", "mipi", "misc"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_csi2_in: port@0 { + reg = <0>; + }; + + mipi_csi2_out: port@1 { + reg = <1>; + + mipi_csi2_out_csi: endpoint { + remote-endpoint = <&csi_in_mipi_csi2>; + }; + }; + }; }; hdmi: hdmi@1ee0000 { diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi index 424f4a2..3ca0897 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi @@ -90,3 +90,7 @@ }; }; }; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index 767f7c7..6b68671 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -34,6 +34,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-harma.dtb \ aspeed-bmc-facebook-minerva.dtb \ aspeed-bmc-facebook-minipack.dtb \ + aspeed-bmc-facebook-rainiera6.dtb \ + aspeed-bmc-facebook-sanmiguel.dtb \ aspeed-bmc-facebook-santabarbara.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-facebook-wedge40.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-kommando-ipmi-card.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-kommando-ipmi-card.dts index ab7ad32..e0f7d92 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-kommando-ipmi-card.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-kommando-ipmi-card.dts @@ -107,6 +107,24 @@ /*18E0 32*/ "","","","","","","",""; }; +&mac2 { + status = "okay"; + + phy-mode = "rgmii-id"; + phy-handle = <ðphy2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; +}; + +&mdio2 { + status = "okay"; + + ethphy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &vhub { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts index 2cb7bd1..1fddf3a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts @@ -481,6 +481,9 @@ gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <174 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = "RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TEMP75_U8_ALERT_R_N", "RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP", @@ -500,6 +503,9 @@ gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <174 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = "RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R", "RPDB_PWRGD_P50V_HSC4_SYS_R", @@ -529,6 +535,9 @@ gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <174 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = "LPDB_FAN_FULL_SPEED_R_N","LPDB_I2C_TEMP75_U8_ALERT_R_N", "LPDB_I2C_TMP432_U29_ALERT_R_N","LPDB_GLOBAL_WP", @@ -546,6 +555,9 @@ gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <174 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = "LPDB_P50V_FAN1_R2_PG","LPDB_P50V_FAN2_R2_PG", "LPDB_P50V_FAN3_R2_PG","LPDB_P50V_FAN4_R2_PG", @@ -882,7 +894,7 @@ /* C0-C7 line 32-47 */ "RSVD_RMC_GPIO3", "", "", "", "", "", "", "", - "LEAK_DETECT_RMC_N", "", "", "", + "LEAK_DETECT_RMC_N", "JTAG_CPLD_TRST_R_N", "", "", "", "", "", "", /* D0-D7 line 48-63 */ @@ -908,11 +920,11 @@ "", "", "", "", /* G0-G7 line 96-111 */ - "PWRGD_PVDDCR_SOC_P0", "", - "PWRGD_PVDDIO_P0", "", - "PWRGD_PVDDIO_MEM_S3_P0", "", - "PWRGD_CHMP_CPU0_FPGA", "", - "PWRGD_CHIL_CPU0_FPGA", "", + "L_PRSNT_EDSFF0_N", "", + "L_PRSNT_EDSFF1_N", "", + "R_PRSNT_EDSFF2_N", "", + "R_PRSNT_EDSFF3_N", "", + "HPM_EDSFF_PG", "", "PWRGD_CHEH_CPU0_FPGA", "", "PWRGD_CHAD_CPU0_FPGA", "FM_BMC_READY_PLD", "", "", @@ -934,7 +946,7 @@ "EAM3_BRD_PRSNT_R_L", "", "EAM0_CPU_MOD_PWR_GD_R", "", "EAM1_CPU_MOD_PWR_GD_R", "", - "EAM2_CPU_MOD_PWR_GD_R", "", + "PRSNT_EDSFF_BOOT_N", "", "EAM3_CPU_MOD_PWR_GD_R", "", /* J0-J7 line 144-159 */ @@ -957,8 +969,8 @@ "PDB_ALERT_R_N", "", /* L0-L7 line 176-191 */ - "CPU0_SP7R1", "", "CPU0_SP7R2", "", - "CPU0_SP7R3", "", "CPU0_SP7R4", "", + "L_EDSFF0_PG", "", "L_EDSFF1_PG", "", + "R_EDSFF2_PG", "", "R_EDSFF3_PG", "", "CPU0_CORETYPE0", "", "CPU0_CORETYPE1", "", "CPU0_CORETYPE2", "", "FM_BIOS_POST_CMPLT_R_N", "", @@ -984,8 +996,8 @@ "HPM_PWR_FAIL", "Port80_b0", "FM_DIMM_IP_FAIL", "Port80_b1", "FM_DIMM_AH_FAIL", "Port80_b2", - "HPM_AMC_THERMTRIP_R_L", "Port80_b3", - "FM_CPU0_THERMTRIP_N", "Port80_b4", + "AMC_THERMTRIP_ASSERT", "Port80_b3", + "CPU_THERMTRIP_ASSERT", "Port80_b4", "PVDDCR_SOC_P0_OCP_L", "Port80_b5", "CPLD_SGPIO_RDY", "Port80_b6", "", "Port80_b7", diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts index 2aff214..820d39a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts @@ -443,11 +443,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; - // IOB0 NIC0 TEMP - temperature-sensor@1f { - compatible = "ti,tmp421"; - reg = <0x1f>; - }; }; i2c0mux2ch1: i2c@1 { @@ -466,11 +461,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <3>; - // IOB0 NIC1 TEMP - temperature-sensor@1f { - compatible = "ti,tmp421"; - reg = <0x1f>; - }; }; }; @@ -637,11 +627,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; - // IOB1 NIC0 TEMP - temperature-sensor@1f { - compatible = "ti,tmp421"; - reg = <0x1f>; - }; }; i2c0mux5ch1: i2c@1 { @@ -666,11 +651,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <3>; - // IOB1 NIC1 TEMP - temperature-sensor@1f { - compatible = "ti,tmp421"; - reg = <0x1f>; - }; }; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-rainiera6.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-rainiera6.dts new file mode 100644 index 0000000..b29e08c --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-rainiera6.dts @@ -0,0 +1,1012 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2026 Facebook Inc. + +/dts-v1/; +#include "aspeed-g6.dtsi" +#include +#include + +/ { + model = "Facebook Rainier BMC"; + compatible = "facebook,rainiera6-bmc", "aspeed,ast2600"; + + aliases { + i2c16 = &i2c5mux0ch0; + i2c17 = &i2c5mux0ch1; + i2c18 = &i2c5mux1ch0; + i2c19 = &i2c5mux1ch1; + i2c20 = &i2c6mux0ch0; + i2c21 = &i2c6mux0ch1; + i2c22 = &i2c6mux0ch2; + i2c23 = &i2c6mux0ch3; + i2c24 = &i2c8mux0ch0; + i2c25 = &i2c8mux0ch1; + i2c26 = &i2c8mux0ch2; + i2c27 = &i2c8mux0ch3; + i2c28 = &i2c26mux0ch0; + i2c29 = &i2c26mux0ch1; + i2c30 = &i2c26mux0ch2; + i2c31 = &i2c26mux0ch3; + serial0 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "power_fault_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + p1v8_adc_vref: regulator-p1v8-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_adc_vref"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + spi_gpio: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +&adc0 { + vref-supply = <&p1v8_adc_vref>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; + status = "okay"; +}; + +&adc1 { + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "BATTERY_DETECT","","BMC_I2C1_FPGA_ALERT_L","BMC_READY_R", + "IOEXP_INT_3V3_L_R1","FM_ID_LED","","", + /*C0-C7*/ "BMC_GPIOC0","","","","PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N","", + "BMC_I2C_SSIF_ALERT_L", + /*D0-D7*/ "","","","","BMC_GPIOD4","","","", + /*E0-E7*/ "BMC_GPIOE0","BMC_GPIOE1","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "FM_BMC_MUX1_SEL_R","","","","","","FM_DEBUG_PORT_PRSNT_R1_N", + "FM_BMC_DBP_PRESENT_R_N", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","FLASH_WP_STATUS_R1","BMC_JTAG_MUX_SEL","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP","SCM_HPM_STBY_RST_N", + "SCM_HPM_STBY_R_EN","STBY_POWER_PG_3V3_R","TH500_SHDN_OK_L","","", + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1","LED_POSTCODE_2", + "LED_POSTCODE_3","LED_POSTCODE_4","LED_POSTCODE_5", + "LED_POSTCODE_6","LED_POSTCODE_7", + /*O0-O7*/ "RUN_POWER_PG","PWR_BRAKE_L","CHASSIS_AC_LOSS_L", + "BSM_PRSNT_R_N","PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N", + "PSU_FW_UPDATING_N","DEBUG_CARD_BYPASS", + /*P0-P7*/ "PWR_BTN_BMC_R1_N","IPEX_CABLE_PRSNT_L","ID_RST_BTN_BMC_R_N", + "RST_BMC_RSTBTN_OUT_R_N","BMC_PWR_LED","RUN_POWER_EN", + "SHDN_FORCE_L","BMC_HEARTBEAT_N", + /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_LV3_N","USB_OC0_REAR_R_N","UART_MUX_SEL", + "I2C_MUX_RESET_L","RSVD_NV_PLT_DETECT","SPI_TPM_INT_L", + "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L", + /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L","CPU_BOOT_DONE", + "PMBUS_GNT_L","CHASSIS_PWR_BRK_L","PCIE_WAKE_L","PDB_THERM_OVERT_L", + "SHDN_REQ_L", + /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N", + "FM_BMC_DEBUG_SW_N","UID_LED_N","SYS_FAULT_LED_N", + "RUN_POWER_FAULT_L", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L","BMC_ID_BEEP_SEL_R1", + "BMC_I2C0_FPGA_ALERT_L","SMB_BMC_TMP_ALERT","PWR_LED_N", + "SYS_RST_OUT_L","IRQ_TPM_SPI_N", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","FM_DBP_CPU_PREQ_GF_N_R1","","","","","","", + /*Y0-Y7*/ "","RST_BMC_SELF_HW_R1","FM_FLASH_LATCH_N_R1","", + "BMC_GPIOY4_R","BMC_GPIOY5_R","","", + /*Z0-Z7*/ "","","","","","","BMC_GPIOZ6_R","BMC_GPIOZ7_R"; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1", + "FM_BOARD_BMC_REV_ID2","", + /*18C0-18C7*/ "","","SPI_BMC_BIOS_ROM_IRQ0_R_N","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_R_N","",""; +}; + +/* Rainiera6 SoC SSIF */ +&i2c1 { + status = "okay"; + + ssif_bmc: ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + status = "okay"; + }; +}; + +/* MCIO 2A I2C */ +&i2c2 { + status = "okay"; +}; + +&i2c4 { + multi-master; + mctp-controller; + clock-frequency = <400000>; + status = "okay"; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + /* OCP NIC TEMP */ + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + /* OCP NIC FRU EEPROM */ + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c5 { + status = "okay"; + + gpio-expander@22 { + compatible = "nxp,pca9535"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "JTAG_BMC_IOEXP_MUX_OE", "JTAG_BMC_MCIO_MUX_S1", + "JTAG_BMC_MCIO_MUX_S0", "JTAG_IOEXP_BMC_MUX_SEL", + "FM_USB_MUX_1_OE_N", "FM_USB_MUX_2_OE_N", + "PROGRAMN_CPLD", "", + "", "", + "", "", + "", "", + "", ""; + }; + + /* I2C MUX for MCIO 1A */ + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c5mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + /* I2C MUX for MCIO 0A */ + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux1ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c5mux1ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c6 { + status = "okay"; + + /* I2C MUX for PWRPIC #13 ~ #16 */ + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + /* PWRPIC #13 */ + i2c6mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* PWRPIC #14 */ + i2c6mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* PWRPIC #16 */ + i2c6mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* PWRPIC #15 */ + i2c6mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c7 { + multi-master; + status = "okay"; + + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c8 { + status = "okay"; + + power-monitor@14 { + compatible = "infineon,xdp710"; + reg = <0x14>; + }; + + adc@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <1>; + }; + + /* PDB IOEXP0 */ + pdb_io_expander0: gpio-expander@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + interrupt-parent = <&sgpiom0>; + interrupts = <92 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "FM_P52V_AUX_FLT_N","FM_P12V_AUX_ALERT_N", + "FM_SLOT1_HSC_FAULT","FM_SLOT2_HSC_FAULT", + "FM_SLOT3_HSC_FAULT","FM_SLOT4_HSC_FAULT", + "FM_SLOT5_HSC_FAULT","FM_SLOT6_HSC_FAULT", + "PRSNT_FAN0","PRSNT_FAN1", + "PRSNT_FAN2","PRSNT_FAN3", + "","", + "","INT_SLOT"; + }; + + /* PDB IOEXP1 */ + gpio-expander@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + interrupt-parent = <&pdb_io_expander0>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SLOT1_CM_UPDATE","SLOT2_CM_UPDATE", + "SLOT3_CM_UPDATE","SLOT4_CM_UPDATE", + "SLOT5_CM_UPDATE","SLOT6_CM_UPDATE", + "","", + "","", + "","", + "","", + "",""; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + /* PADDLE BD IOEXP */ + gpio-expander@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "HSC_OC_GPIO0", "HSC_OC_GPIO1", + "HSC_OC_GPIO2", "HSC_OC_GPIO3"; + }; + + power-sensor@42 { + compatible = "ti,ina238"; + reg = <0x42>; + shunt-resistor = <1000>; + }; + + power-monitor@43 { + compatible = "lltc,ltc4287"; + reg = <0x43>; + shunt-resistor-micro-ohms = <100>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + power-monitor@46 { + compatible = "mps,mp5998"; + reg = <0x46>; + }; + + power-monitor@47 { + compatible = "ti,tps25990"; + reg = <0x47>; + ti,rimon-micro-ohms = <430000000>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + /* PDB FRU */ + eeprom@56 { + compatible = "atmel,24c128"; + reg = <0x56>; + }; + + /* Paddle BD FRU */ + eeprom@57 { + compatible = "atmel,24c128"; + reg = <0x57>; + }; + + power-monitor@58 { + compatible = "renesas,isl28022"; + reg = <0x58>; + shunt-resistor-micro-ohms = <10000>; + }; + + power-monitor@59 { + compatible = "renesas,isl28022"; + reg = <0x59>; + shunt-resistor-micro-ohms = <10000>; + }; + + power-monitor@5a { + compatible = "renesas,isl28022"; + reg = <0x5a>; + shunt-resistor-micro-ohms = <10000>; + }; + + power-monitor@5b { + compatible = "renesas,isl28022"; + reg = <0x5b>; + shunt-resistor-micro-ohms = <10000>; + }; + + psu@5c { + compatible = "renesas,raa228006"; + reg = <0x5c>; + }; + + fan-controller@5e{ + compatible = "maxim,max31790"; + reg = <0x5e>; + }; + + /* I2C MUX for PWRPIC #1, #2, #11, #12 */ + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + /* PWRPIC #1 */ + i2c8mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* PWRPIC #2 */ + i2c8mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* PWRPIC #12 (Connector to CXL BD) */ + i2c8mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + i2c26mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c26mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c26mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + /* CXL FRU */ + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + i2c26mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + /* PWRPIC #11 */ + i2c8mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c9 { + status = "okay"; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + /* SCM FRU */ + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + /* BSM FRU */ + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +/* MCIO 0A I2C */ +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + /* I2C11_IOEXP_3 */ + gpio-expander@20 { + compatible = "nxp,pca9535"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "IRQ_INA230_FAN0_ALERT_N_CPLD", "IRQ_INA230_FAN1_ALERT_N_CPLD", + "IRQ_INA230_FAN2_ALERT_N_CPLD", "IRQ_INA230_FAN3_ALERT_N_CPLD", + "IRQ_INA230_P12V_DIMM_0_ALERT_N", "IRQ_INA230_P12V_DIMM_1_ALERT_N", + "IRQ_P3V3_E1S_0_FLT_N", "P12V_E1S_0_FAULT_R_N", + "IRQ_P3V3_E1S_1_FLT_N", "P12V_E1S_1_FAULT_R_N", + "IRQ_P3V3_NIC_FLT_N", "P12V_NIC_FAULT_R_N", + "SMB_SENSOR_ALERT_N", "FW_CPLD_RST_RTC_RST_R1", + "RTC_CLR", "RTC_U11_ALRT_N"; + }; + + /* I2C11_IOEXP_2 */ + gpio-expander@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "FAN_0_PRESENT_CPLD", "FAN_1_PRESENT_CPLD", + "FAN_2_PRESENT_CPLD", "FAN_3_PRESENT_CPLD", + "FAN_FAIL_L_CPLD", "FULL_SPEED_N_R_CPLD", + "P12V_FAN0_PWRGD_CPLD", "P12V_FAN1_PWRGD_CPLD", + "P12V_FAN2_PWRGD_CPLD", "P12V_FAN3_PWRGD_CPLD", + "FM_P12V_FAN0_FLTB_N_CPLD", "FM_P12V_FAN1_FLTB_N_CPLD", + "FM_P12V_FAN2_FLTB_N_CPLD", "FM_P12V_FAN3_FLTB_N_CPLD", + "P12V_FAN_EN_R_CPLD", ""; + }; + + /* I2C11_IOEXP_1 */ + gpio-expander@27 { + compatible = "nxp,pca9535"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "PWRGD_P12V_SCM", "PWRGD_P5V_STBY", + "PWRGD_P3V3_STBY", "PWRGD_P1V8_STBY", + "PWRGD_P1V2_STBY", "PWRGD_P1V1_STBY", + "PWRGD_P1V0_STBY", "", + "", "", + "", "", + "", "", + "", ""; + }; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@42 { + compatible = "ti,ina230"; + reg = <0x42>; + shunt-resistor = <2000>; + }; + + power-sensor@43 { + compatible = "ti,ina230"; + reg = <0x43>; + shunt-resistor = <2000>; + }; + + power-sensor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + + power-sensor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + + adc@49 { + compatible = "ti,ads7830"; + reg = <0x49>; + }; + + adc@4a { + compatible = "ti,ads7830"; + reg = <0x4a>; + }; + + adc@4b { + compatible = "ti,ads7830"; + reg = <0x4b>; + }; + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + status = "okay"; + }; +}; + +/* MCIO 4A I2C */ +&i2c12 { + multi-master; + mctp-controller; + clock-frequency = <400000>; + status = "okay"; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; +}; + +&i2c13 { + status = "okay"; + + fan-controller@20 { + compatible = "maxim,max31790"; + reg = <0x20>; + }; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + + power-sensor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + + power-sensor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + + temperature-sensor@48 { + compatible = "national,lm75b"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "national,lm75b"; + reg = <0x49>; + }; + + /* MB FRU */ + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; +}; + +/* PROT reserve */ +&i2c14 { + status = "okay"; +}; + +/* MCIO 3A I2C */ +&i2c15 { + status = "okay"; +}; + +&mac2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi3_default>; + use-ncsi; + status = "okay"; +}; + +&pinctrl { + pinctrl_ncsi3_default: ncsi3_default { + function = "RMII3"; + groups = "NCSI3"; + }; +}; + +&sgpiom0 { + status = "okay"; + ngpios = <128>; + bus-frequency = <2000000>; + gpio-line-names = + /*"input pin","output pin"*/ + "SOC_ERROR_N_CPLD","RST_SOC_SRST_N_CPLD", + "SOC_ELASTOPCLK_N","SOC_BMC_READY_CPLD", + "SOC_LINKSTOP_N","wIBB_BMC_SRST_OUT", + "SOC_POST_COMPLETE_CPLD","I3C_MUX_SEL_DIMM_C0_024", + "SOC_RESETREQ","I3C_MUX_SEL_DIMM_C0_135", + "SOC_SYS_PWRDN_CPLD","I3C_MUX_SEL_DIMM_C1_024", + "SOC_PORQ","I3C_MUX_SEL_DIMM_C1_135", + "SOC_HOT_N_CPLD","BOOT_PWRDIS_CPLD", + // IOB0-IOB7 bit8-15 + "PWRGD_V1P8_CPU","HDD0_PERST_N_CPLD", + "PWRGD_V1P26_CPLD","HDD1_PERST_N_CPLD", + "PWRGD_V1P2","MCIO_1A_PWRDIS_R", + "","", + "FM_CONFIG_ID","P3V_BAT_SCALED_EN", + "wALL_POWER_OK","PERST_CEM0_N_CPLD", + "wANDGATE_ALL_POWER_GD","PERST_CEM1_N_CPLD", + "wAC_CYCLE_12V","PERST_PLD_TUSB7340_N", + // IOC0-IOC7 bit16-23 + "wAC_CYCLE_54V","FM_USB_MUX_SEL_CPLD", + "FM_PLD_CLKS_DEV_EN","SMB_BOOT_RST_N_CPLD", + "PWRGD_P1V2_STBY","SMB_MCIO_0A_RST_R_N", + "wIBB_BMC_SRST","RST_SMB_NIC_R_N", + "PWRGD_P12V_E1S_0","FM_PPS_NIC_IN_BUF_OE_N_R", + "PWRGD_P12V_E1S_1","FM_BUF_PPS_NIC_IN_EN_CPLD", + "","FM_NIC_PPS_IN_OE_CPLD", + "PWRGD_P12V_NIC","FM_PPS_NIC_IN_S0_CPLD", + // IOD0-IOD7 bit24-31 + "wALL_POWER_OK_1","FM_NIC_PPS_IN_S1", + "wALL_POWER_OK_2","FM_PPS_NIC_OUT_CPU_OE_N", + "PWRGD_EAST_DIMM_CPLD","", + "PWRGD_WEST_DIMM_CPLD","FM_BUF_PPS_NIC_OUT_EN_CPLD", + "PWRGD_NIC_CPLD","", + "","PMBUS_MUX_SEL_C0", + "PHOENIX_PWRBTN_N_CPLD","PMBUS_MUX_SEL_C1", + "IRQ_INA230_E1S_0_ALERT_N","", + // IOE0-IOE7 bit32-39 + "IRQ_INA230_E1S_1_ALERT_N","PWR_ON_RST_TUSB7340_CPLD", + "","RST_PCIE_BOOT_PERST_N_CPLD", + "FM_NIC_WAKE_N_CPLD","RST_PCIE_CPLD_NIC_N_CPLD", + "FM_TPM_CONN_PRSNT_N","RST_PCIE_MCIO_0A_PERST_N_CPLD", + "HDD0_PRSNT_N_CPLD","RST_PCIE_MCIO_0B_PERST_N_CPLD", + "IRQ_INA230_P12V_NIC_ALERT_N","RST_PCIE_MCIO_1A_PERST_N_CPLD", + "IRQ_INA230_P12V_SCM_ALERT_N","RST_PCIE_MCIO_1A_SA_PERST_N_CPL", + "IRQ_PMBUS_ALERT_PWR11_R_N","RST_PCIE_MCIO_1B_PERST_N_CPLD", + // IOF0-IOF7 bit40-47 + "CHASSIS_LEAK_2A_R_N","RST_PCIE_MCIO_2A_PERST_N_CPLD", + "CHASSIS_LEAK_3A_R_N","RST_PCIE_MCIO_2B_PERST_N_CPLD", + "CHASSIS_LEAK_4A_R_N","RST_PCIE_MCIO_3A_PERST_N_CPLD", + "OC_ALERT_PADDLE_R_N","RST_PCIE_MCIO_3B_PERST_N_CPLD", + "OC_ALERT_PWR2_R_N","RST_PCIE_MCIO_4A_PERST_N_CPLD", + "OC_ALERT_PWR11_R_N","RST_PCIE_MCIO_4B_PERST_N_CPLD", + "FM_IOE_ALT_N","RST_PERST1_N_CPLD", + "LEAK_DETECT_1_PWR14_R_N","RST_PERST2_N_CPLD", + // IOG0-IOG7 bit48-55 + "LEAK_DETECT_2_PWR14_R_N","RST_PERST3_N_CPLD", + "LEAK_DETECT_1_PWR15_R_N","RST_SMB_MUX_MCIO_0A_R_N", + "LEAK_DETECT_2_PWR15_R_N","RST_SMB_MUX_MCIO_1A_R_N", + "MCIO_0A_SMB_ALERT_N","RST_SOC_EXTWARMRESET_CPLD", + "MCIO_1A_SMB_ALERT_N","RST_SOC_PORESET_N_BMC", + "MCIO_2A_SMB_ALERT_N","RST_USB_HUB_R_N", + "MCIO_2B_SMB_ALERT_N","SMB_MM7_MUX_RESET_N", + "MCIO_3A_SMB_ALERT_N","SMB_MUX_RESET_N_CPLD", + // IOH0-IOH7 bit56-63 + "MCIO_3B_SMB_ALERT_N","SOC_I2C_0_ALERT_CPLD", + "MCIO_4A_SMB_ALERT_N","SOC_LINKSTOP_OUT_N", + "MCIO_4B_SMB_ALERT_N","SPI_TPM_RST_R_N", + "MCIO_1A_THERMTRIP_N","", + "MCIO_2A_THERMTRIP_N","", + "MCIO_3A_THERMTRIP_N","", + "MCIO_4A_THERMTRIP_N_CPLD","", + "UV_ALERT_PADDLE_R_N","wFM_USB_MUX_OE_N", + // IOI0-IOI7 bit64-71 + "UV_ALERT_PWR2_R_N","wFM_USB_MUX_SEL", + "UV_ALERT_PWR11_R_N","", + "SOC_PMBUS_0_ALERT_R_CPLD","FM_BIOS_DEBUG_MODE_N", + "HDD1_PRSNT_N_CPLD","", + "","", + "SOC_DRAM_0_HOT_N_CPLD","", + "SOC_DRAM_1_HOT_N_CPLD","RST_PLTRST_PLD_B_N", + "SOC_DRAM_2_HOT_N_CPLD","FM_TPM_MUX6_SEL", + // IOJ0-IOJ7 bit72-79 + "SOC_DRAM_3_HOT_N_CPLD","CPLD_MUX6_EN_N", + "IRQ_P3V3_NIC_FLT_MOS_N_CPLD","", + "VRHOT_V0P75_PCIE_VDDQ_N","", + "P12V_SCM_FAULT_R_N","", + "SOC_I2C_1_ALERT_CPLD","", + "","", + "SOC_PLATHOT_N_CPLD","", + "SOC_THRMTRIP_N_CPLD","", + // IOK0-IOK7 bit80-87 + "VRHOT_VCPUC1_VCPUMC1_N","", + "VRHOT_VSYSC0_VSOCC0_N","", + "VRHOT_VSYSC1_VSOCC1_N","", + "VRHOT_VCPUC0_VCPUMC0_N","", + "","", + "INT_IOEXP_N","", + "RSVD_IOEXP_0A_SB1_R","", + "RSVD_IOEXP_0A_SB2_R","", + // IOL0-IOL7 bit88-95 + "IRQ_PMBUS_PWR2_ALERT_R_N","", + "FM_BORD_REV_ID0","", + "FM_BORD_REV_ID1","", + "FM_BORD_REV_ID2","", + "FM_VR_TYPE_0","", + "FM_VR_TYPE_1","", + "","", + "MCIO_0B_SMB_ALERT_N","", + // IOM0-IOM7 bit96-103 + "MCIO_1B_SMB_ALERT_N","", + "PRSNT_BOOT_N","", + "PRSNT_MCIO_1A_N","", + "wPRSNT_NIC_N","", + "","", + "SOC_TEST_MODE0","", + "PWRGD_V0P75_PCIE","", + "PWRGD_VDDQ","", + // ION0-ION7 bit104-111 + "PWRGD_VCPUC0","", + "PWRGD_VCPUMC0","", + "PWRGD_VCPUMC1","", + "PWRGD_VCPUC1","", + "PWRGD_VSYSC0","", + "PWRGD_VSOCC0","", + "PWRGD_VSYSC1","", + "PWRGD_VSOCC1","", + // IOO0-IOO7 bit112-119 + "SOC_PMBUS_1_ALERT_R_CPLD","", + "SOC_GPIO_15","", + "C0_POSTCODE_0_CPLD","", + "C0_POSTCODE_1_CPLD","", + "C0_POSTCODE_2_CPLD","", + "C0_POSTCODE_3_CPLD","", + "C0_POSTCODE_4_CPLD","", + "C1_POSTCODE_0_CPLD","", + // IOP0-IOP7 bit 120-127 + "C1_POSTCODE_1_CPLD","", + "C1_POSTCODE_2_CPLD","", + "C1_POSTCODE_3_CPLD","", + "C1_POSTCODE_4_CPLD","", + "","", + "SOC_GPIO_17","", + "SOC_GPIO_18","", + "SOC_GPIO_37",""; +}; + +/* BIOS Flash */ +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + status = "okay"; + + flash@0 { + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <12000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + status = "okay"; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +/* SOL */ +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +/* BMC Console */ +&uart5 { + status = "okay"; +}; + +&wdt1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts new file mode 100644 index 0000000..d7ed497 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts @@ -0,0 +1,672 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2025 Facebook Inc. + +/dts-v1/; +#include "aspeed-g6.dtsi" +#include +#include +#include +#include +#include +#include + +/ { + model = "Facebook SanMiguel BMC"; + compatible = "facebook,sanmiguel-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>; + }; + + leds-fio { + compatible = "gpio-leds"; + led-0 { + label = "power_blue"; + gpios = <&fio_ioexp 4 GPIO_ACTIVE_HIGH>; + }; + led-1 { + label = "power_amber"; + gpios = <&fio_ioexp 5 GPIO_ACTIVE_LOW>; + }; + led-2 { + label = "id_blue"; + gpios = <&fio_ioexp 6 GPIO_ACTIVE_HIGH>; + }; + led-3 { + label = "id_amber"; + gpios = <&fio_ioexp 7 GPIO_ACTIVE_LOW>; + }; + }; + + leds-smm { + compatible = "gpio-leds"; + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + spi2_gpio: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; + + standby_power_regulator: standby-power-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "standby_power"; + enable-active-high; + regulator-always-on; + regulator-boot-on; + + status = "okay"; + }; +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default>; + aspeed,int-vref-microvolt = <2500000>; + + status = "okay"; +}; + +&fmc { + status = "okay"; + + flash@0 { + label = "bmc"; + spi-max-frequency = <50000000>; + m25p,fast-read; + + status = "okay"; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + label = "alt-bmc"; + spi-max-frequency = <50000000>; + m25p,fast-read; + + status = "okay"; +#include "openbmc-flash-layout-128-alt.dtsi" + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiom4_unbiased_default + &pinctrl_gpiom5_unbiased_default + &pinctrl_gpiov4_unbiased_default + &pinctrl_gpiov7_unbiased_default>; + + gpio-line-names = + /*A0-A7*/ "", "", "", "", "", "", "", "", + /*B0-B7*/ "", "", "", "", "", "", "", "", + /*C0-C7*/ "", "", "", "", "", "", "", "", + /*D0-D7*/ "", "", "", "", "", "FPGA_PEX_RST_L", "", "", + /*E0-E7*/ "RTL8221_PHY_RST_L-O", "RTL8211_PHY_INT_L-I", "", "", + "", "", "", "MUX_SGPIO_SEL-O", + /*F0-F7*/ "", "", "", "", "", "", "", "", + /*G0-G7*/ "", "", "", "", "", "", "", "", + /*H0-H7*/ "", "", "", "", "", "", "", "", + /*I0-I7*/ "", "", "", "", + "", "QSPI2_RST_L-O", + "GLOBAL_WP_BMC-I", "BMC_DDR4_TEN-O", + /*J0-J7*/ "", "", "", "", "", "", "", "", + /*K0-K7*/ "", "", "", "", "", "", "", "", + /*L0-L7*/ "", "", "", "", "", "", "", "", + /*M0-M7*/ "USB_HUB_RST_N-O", "BMC_FRU_WP-O", + "", "HMC_STBY_POWER_EN-O", + "STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "", + /*N0-N7*/ "", "", "", "", "", "", "", "", + /*O0-O7*/ "", "", "", "", "", "", "", "", + /*P0-P7*/ "", "", "", "", "", "", "", "", + /*Q0-Q7*/ "", "", "", "", "", "", "", "", + /*R0-R7*/ "", "SP0_AP_INTR_N-I", "", "", "", "", "", "", + /*S0-S7*/ "", "", "", "", "", "", "", "", + /*T0-T7*/ "", "", "", "", "", "", "", "", + /*U0-U7*/ "", "", "", "", "", "", "", "", + /*V0-V7*/ "", "", "", "", "PCB_TEMP_ALERT-I", "", "", "", + /*W0-W7*/ "", "", "", "", "", "", "", "CPU_RST_L-I", + /*X0-X7*/ "", "", "", "", "", "", "", "", + /*Y0-Y7*/ "", "", "", "EMMC_RST-O", "", "", "", "", + /*Z0-Z7*/ "HMC_EROT_SPI_INT_L-I", "", "", "", "", "", "", ""; +}; + +&gpio1 { + /* 36 1.8V GPIOs */ + gpio-line-names = + /*A0-A7*/ "", "", "", "", "", "", "", "", + /*B0-B7*/ "", "", "", "", + "AP_EROT_REQ-O", "EROT_AP_GNT-I", + "IO_EXPANDER_INT_L-I", "", + /*C0-C7*/ "", "", "", "", "", "", "", "", + /*D0-D7*/ "", "", "", "", "", "", "", "I2C_SSIF_ALERT_L-I", + /*E0-E7*/ "", "", "", "", "", "", "", ""; +}; + +&i2c0 { + status = "okay"; + + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + hpm0_ioexp_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + vcc-supply = <&standby_power_regulator>; + + gpio-line-names = + "B0_M0_SHDN_FORCE_L-O", + "B0_M0_STBY_POWER_PG-I", + "B0_M0_THERM_OVERT_L-I", + "B0_M0_THERM_WARN_L-I", + "B0_M0_GLOBAL_WP-O", + "B0_M0_USB_HUB0_RST_L-O", + "B0_M0_PRE_SYS_RST_L-O", + "B0_M0_LEAK_DETECT_ALERT_L-I", + "B0_M0_RUN_POWER_EN-O", + "B0_M0_RUN_POWER_PG-I", + "B0_M0_CPU_CHIPTHROT_L-I", + "B0_M0_SHDN_REQ_L-O", + "B0_M0_CPU_SHDN_OK_L-I", + "B0_M0_CPLD_READY-I", + "B0_M0_PWR_BRAKE_L-O", + "B0_M0_PWR_BRAKE_STATUS_L-I"; + }; + + hpm0_ioexp_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + vcc-supply = <&standby_power_regulator>; + + gpio-line-names = + "B0_M0_I2C_BUS_MUX_RESET_L-O", + "B0_M0_HPM_MCU_OK-I", + "B0_M0_CPU_L0_RST_IND_L-O", + "B0_M0_C0_SOCAMM_DAC_SEL0-O", + "B0_M0_C1_SOCAMM_DAC_SEL1-O", + "B0_M0_C0_SOCAMM_I2C_SEL_R-O", + "B0_M0_C1_SOCAMM_I2C_SEL_R-O", + "B0_M0_EEPROM_POWER_DISABLE-O", + "B0_M0_L0L1_RST_L-I", + "B0_M0_L2_RST_L-I", + "B0_M0_BRD_ID_0-I", + "B0_M0_BRD_ID_1-I", + "B0_M0_BMC_LEAK_TEST_L-O", + "B0_M0_MCU_BMC_ALERT_L-I", + "B0_M0_CPU_BOOT_COMPLETE_3V3-I", + "B0_M0_BMC_TO_GPU_MCU_I2C_EN-O"; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + + smm_ioexp_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + + gpio-line-names = + "HMC_RST_R_L-O", "HMC_RECOVERY_R-O", + "HMC_SPI_MUX_R_SEL-O", "GLOBAL_WP-O", + "HMC_READY-I", "HMC_PRSNT_R-I", + "BMC_SELF_PWR_CYCLE-O", "EEDO_LED2-O", + "PWR_LED_L-O", "PWR_BTN_L-I", + "UID_LED_L-O", "UID_BTN_L-I", + "FAULT_LED_L-O", "USB2_HUB_RST_L-O", + "USB2_BMC_HUB2_RST_L-O", "WARN_LED_L-O"; + }; + + smm_ioexp_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + + gpio-line-names = + "BMC_HMC_MUX_SEL-O", "BMC_TPM_MUX_SEL-O", + "BMC_USB2_MUX_SEL-O", "HMC_PGOOD_3V3-I", + "", "HDR_SPI_PRSNT_L-I", + "SW_NRESET_R_L-O", "MUX_I2C_ESPI_SEL-O", + "I2C_BUS_MUX_RESET_L-O", "USB_MUX_EN-O", + "PDB_TRAY_RST-O", "USB_PWR_EN-O", + "RTC_CLR_L-O", "I2C_RTC_ALERT_L-I", + "X86_TPM_RST_SEL_L-O", "BMC_MUX_PI3DP_SEL-O"; + }; + + smm_temp: temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + smm_fru: eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; +}; + +&i2c6 { + status = "okay"; + + hmc_ioexp: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + + gpio-line-names = + "", "", "HMC_EROT_FATAL_ERROR_L-I", "", + "", "HMC_EROT_RECOVERY_L-O", "HMC_EROT_RESET_L-O", ""; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c7 { + status = "okay"; + + hpm1_ioexp_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + vcc-supply = <&standby_power_regulator>; + + gpio-line-names = + "B1_M0_SHDN_FORCE_L-O", + "B1_M0_STBY_POWER_PG-I", + "B1_M0_THERM_OVERT_L-I", + "B1_M0_THERM_WARN_L-I", + "B1_M0_GLOBAL_WP-O", + "B1_M0_USB_HUB0_RST_L-O", + "B1_M0_PRE_SYS_RST_L-O", + "B1_M0_LEAK_DETECT_ALERT_L-I", + "B1_M0_RUN_POWER_EN-O", + "B1_M0_RUN_POWER_PG-I", + "B1_M0_CPU_CHIPTHROT_L-I", + "B1_M0_SHDN_REQ_L-O", + "B1_M0_CPU_SHDN_OK_L-I", + "B1_M0_CPLD_READY-I", + "B1_M0_PWR_BRAKE_L-O", + "B1_M0_PWR_BRAKE_STATUS_L-I"; + }; + + hpm1_ioexp_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + vcc-supply = <&standby_power_regulator>; + + gpio-line-names = + "B1_M0_I2C_BUS_MUX_RESET_L-O", + "B1_M0_HPM_MCU_OK-I", + "B1_M0_CPU_L0_RST_IND_L-O", + "B1_M0_C0_SOCAMM_DAC_SEL0-O", + "B1_M0_C1_SOCAMM_DAC_SEL1-O", + "B1_M0_C0_SOCAMM_I2C_SEL_R-O", + "B1_M0_C1_SOCAMM_I2C_SEL_R-O", + "B1_M0_EEPROM_POWER_DISABLE-O", + "B1_M0_L0L1_RST_L-I", + "B1_M0_L2_RST_L-I", + "B1_M0_BRD_ID_0-I", + "B1_M0_BRD_ID_1-I", + "B1_M0_BMC_LEAK_TEST_L-O", + "B1_M0_MCU_BMC_ALERT_L-I", + "B1_M0_CPU_BOOT_COMPLETE_3V3-I", + "B1_M0_BMC_TO_GPU_MCU_I2C_EN-O"; + }; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + pdb_mps_hsc1: power-monitor@10 { + compatible = "mps,mp5926"; + reg = <0x10>; + }; + + pdb_ti_hsc1: power-monitor@11 { + compatible = "ti,lm5066i"; + reg = <0x11>; + shunt-resistor-micro-ohms = <763>; + }; + + pdb_mps_hsc2: power-monitor@12 { + compatible = "mps,mp5926"; + reg = <0x12>; + }; + + pdb_ti_hsc2: power-monitor@13 { + compatible = "ti,lm5066i"; + reg = <0x13>; + shunt-resistor-micro-ohms = <294>; + }; + + pdb_mps_hsc3: power-monitor@14 { + compatible = "mps,mp5926"; + reg = <0x14>; + }; + + pdb_ti_hsc3: power-monitor@15 { + compatible = "ti,lm5066i"; + reg = <0x15>; + shunt-resistor-micro-ohms = <294>; + }; + + pdb_mps_hsc4: power-monitor@16 { + compatible = "mps,mp5926"; + reg = <0x16>; + }; + + pdb_ti_hsc4: power-monitor@17 { + compatible = "ti,lm5066i"; + reg = <0x17>; + shunt-resistor-micro-ohms = <381>; + }; + + pdb_ioexp_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + + gpio-line-names = + "PDB_STRAP-I", "STBY_POWER_EN-O", "STBY_PWR_OK-I", "", + "", "MAIN_PWR_EN-O", "MAIN_PWR_OK-I", "GLOBAL_WP-O", + "PDB_PWR_BRK_L-I", "FAN_PRSNT-I", "", "", + "HSC4_S5_OR_S0_N-O", "", "", ""; + }; + + pdb_temp: temperature-sensor@4e { + compatible = "national,lm75"; + reg = <0x4e>; + }; + + pdb_fru: eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c10 { + status = "okay"; + + scm_temp: temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + scm_fru: eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + sw_config: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; + mctp-controller; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + smm_ext_ioexp: gpio@38 { + compatible = "nxp,pca9554"; + reg = <0x38>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + + gpio-line-names = + "SSD0_PRSNT_L-I", "E1S_PWR_EN-O", + "SSD0_PWRDIS-O", "I2C_PDB_ALERT_L-I", + "BMC_SSD0_RST_L-O", "GLOBAL_WP_E1S-O", + "12V_SSD0_PGD-I", "SSD0_LED-O"; + }; + + smm_ext_fru: eeprom@55 { + compatible = "atmel,24c128"; + reg = <0x55>; + }; +}; + +&i2c14 { + status = "okay"; + + fio_ioexp: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + + gpio-line-names = + "", "", "", "", + "PWR_LED_BLUE", "PWR_LED_AMBER_R_N", + "BEEP_ID_LED_BLUE", "BEEP_ID_LED_AMBER_R_N", + "", "", "", "", + "FM_MAIN_PWREN_RMC_ISO_EN_N", "LEAK_DETECT_RMC_N", + "PWRGD_RMC_N", "SMALL_LEAK_RMC_N"; + + pwrgd-rmc-hog { + gpio-hog; + gpios = <14 GPIO_ACTIVE_LOW>; + output-low; + }; + }; + + fio_fru: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c15 { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac0 { + pinctrl-names = "default"; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + pinctrl-0 = <&pinctrl_rgmii1_default>; + + status = "okay"; +}; + +&pinctrl { + pinctrl_gpiom4_unbiased_default: gpiom4 { + pins = "B12"; + bias-disable; + }; + pinctrl_gpiom5_unbiased_default: gpiom5 { + pins = "C12"; + bias-disable; + }; + pinctrl_gpiov4_unbiased_default: gpiov4 { + pins = "AE15"; + bias-disable; + }; + pinctrl_gpiov7_unbiased_default: gpiov7 { + pins = "AF15"; + bias-disable; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&wdt1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts index 2486981..6287f80 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts @@ -422,6 +422,11 @@ shunt-resistor = <1000>; }; + power-monitor@46 { + compatible = "mps,mp5998"; + reg = <0x46>; + }; + power-monitor@47 { compatible = "ti,tps25990"; reg = <0x47>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts index a12d416..29f5617 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts @@ -208,6 +208,21 @@ status = "okay"; }; +&mac0 { + phy-mode = "rgmii-id"; + phy-handle = <ðphy3>; + status = "okay"; +}; + +&mdio3 { + status = "okay"; + + ethphy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; +}; + &rtc { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi index 189bc3b..56bb3b0 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi @@ -102,6 +102,15 @@ reg = <0x1e600000 0x100>; }; + pwm_tach: pwm-tach-controller@1e610000 { + compatible = "aspeed,ast2600-pwm-tach"; + reg = <0x1e610000 0x100>; + clocks = <&syscon ASPEED_CLK_AHB>; + resets = <&syscon ASPEED_RESET_PWM>; + #pwm-cells = <3>; + status = "disabled"; + }; + fmc: spi@1e620000 { reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; #address-cells = <1>; @@ -835,11 +844,326 @@ status = "disabled"; }; - i2c: bus@1e78a000 { + bus@1e78a000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1e78a000 0x1000>; + + i2c0: i2c@80 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "disabled"; + }; + + i2c1: i2c@100 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x100 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; + status = "disabled"; + }; + + i2c2: i2c@180 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x180 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + status = "disabled"; + }; + + i2c3: i2c@200 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x200 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + status = "disabled"; + }; + + i2c4: i2c@280 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x280 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + status = "disabled"; + }; + + i2c5: i2c@300 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x300 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6_default>; + status = "disabled"; + }; + + i2c6: i2c@380 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x380 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_default>; + status = "disabled"; + }; + + i2c7: i2c@400 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x400 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + status = "disabled"; + }; + + i2c8: i2c@480 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x480 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + status = "disabled"; + }; + + i2c9: i2c@500 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x500 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "disabled"; + }; + + i2c10: i2c@580 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x580 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + status = "disabled"; + }; + + i2c11: i2c@600 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x600 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c12_default>; + status = "disabled"; + }; + + i2c12: i2c@680 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x680 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c13_default>; + status = "disabled"; + }; + + i2c13: i2c@700 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x700 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c14_default>; + status = "disabled"; + }; + + i2c14: i2c@780 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x780 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c15_default>; + status = "disabled"; + }; + + i2c15: i2c@800 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x800 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = ; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c16_default>; + status = "disabled"; + }; + }; + + bus@1e7a0000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e7a0000 0x8000>; + + i3c_global: syscon@0 { + compatible = "aspeed,ast2600-i3c-global", "syscon"; + reg = <0x0 0x1000>; + resets = <&syscon ASPEED_RESET_I3C_DMA>; + }; + + i3c0: i3c@2000 { + compatible = "aspeed,ast2600-i3c"; + reg = <0x2000 0x1000>; + #address-cells = <3>; + #size-cells = <0>; + clocks = <&syscon ASPEED_CLK_GATE_I3C0CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i3c1_default>; + interrupts = ; + aspeed,global-regs = <&i3c_global 0>; + status = "disabled"; + }; + + i3c1: i3c@3000 { + compatible = "aspeed,ast2600-i3c"; + reg = <0x3000 0x1000>; + #address-cells = <3>; + #size-cells = <0>; + clocks = <&syscon ASPEED_CLK_GATE_I3C1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i3c2_default>; + interrupts = ; + aspeed,global-regs = <&i3c_global 1>; + status = "disabled"; + }; + + i3c2: i3c@4000 { + compatible = "aspeed,ast2600-i3c"; + reg = <0x4000 0x1000>; + #address-cells = <3>; + #size-cells = <0>; + clocks = <&syscon ASPEED_CLK_GATE_I3C2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i3c3_default>; + interrupts = ; + aspeed,global-regs = <&i3c_global 2>; + status = "disabled"; + }; + + i3c3: i3c@5000 { + compatible = "aspeed,ast2600-i3c"; + reg = <0x5000 0x1000>; + #address-cells = <3>; + #size-cells = <0>; + clocks = <&syscon ASPEED_CLK_GATE_I3C3CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i3c4_default>; + interrupts = ; + aspeed,global-regs = <&i3c_global 3>; + status = "disabled"; + }; + + i3c4: i3c@6000 { + compatible = "aspeed,ast2600-i3c"; + reg = <0x6000 0x1000>; + #address-cells = <3>; + #size-cells = <0>; + clocks = <&syscon ASPEED_CLK_GATE_I3C4CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i3c5_default>; + interrupts = ; + aspeed,global-regs = <&i3c_global 4>; + status = "disabled"; + }; + + i3c5: i3c@7000 { + compatible = "aspeed,ast2600-i3c"; + reg = <0x7000 0x1000>; + #address-cells = <3>; + #size-cells = <0>; + clocks = <&syscon ASPEED_CLK_GATE_I3C5CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i3c6_default>; + interrupts = ; + aspeed,global-regs = <&i3c_global 5>; + status = "disabled"; + }; }; fsim0: fsi@1e79b000 { @@ -870,229 +1194,3 @@ }; #include "aspeed-g6-pinctrl.dtsi" - -&i2c { - i2c0: i2c@80 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x80 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_default>; - status = "disabled"; - }; - - i2c1: i2c@100 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x100 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_default>; - status = "disabled"; - }; - - i2c2: i2c@180 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x180 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_default>; - status = "disabled"; - }; - - i2c3: i2c@200 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x200 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4_default>; - status = "disabled"; - }; - - i2c4: i2c@280 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x280 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c5_default>; - status = "disabled"; - }; - - i2c5: i2c@300 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x300 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c6_default>; - status = "disabled"; - }; - - i2c6: i2c@380 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x380 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c7_default>; - status = "disabled"; - }; - - i2c7: i2c@400 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x400 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c8_default>; - status = "disabled"; - }; - - i2c8: i2c@480 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x480 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c9_default>; - status = "disabled"; - }; - - i2c9: i2c@500 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x500 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c10_default>; - status = "disabled"; - }; - - i2c10: i2c@580 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x580 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c11_default>; - status = "disabled"; - }; - - i2c11: i2c@600 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x600 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c12_default>; - status = "disabled"; - }; - - i2c12: i2c@680 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x680 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c13_default>; - status = "disabled"; - }; - - i2c13: i2c@700 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x700 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c14_default>; - status = "disabled"; - }; - - i2c14: i2c@780 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x780 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c15_default>; - status = "disabled"; - }; - - i2c15: i2c@800 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x800 0x80>; - compatible = "aspeed,ast2600-i2c-bus"; - clocks = <&syscon ASPEED_CLK_APB2>; - resets = <&syscon ASPEED_RESET_I2C>; - interrupts = ; - bus-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c16_default>; - status = "disabled"; - }; -}; diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts index 353bb50..5469fa6 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -110,7 +110,7 @@ "GPIO26", "GPIO27", "RGMII_MDIO", - "RGMIO_MDC", + "RGMII_MDC", /* Used by BT module */ "CTS0", /* 30 */ "RTS0", diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts index 6bc77dd..1f4ebec 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts @@ -56,7 +56,7 @@ "GPIO26", "GPIO27", "RGMII_MDIO", - "RGMIO_MDC", + "RGMII_MDC", /* Used by BT module */ "CTS0", "RTS0", diff --git a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts index 0454423..ad246f9 100644 --- a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts +++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts @@ -43,3 +43,7 @@ &usb3_phy { status = "okay"; }; + +&usb3 { + vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts index 7739673..55f0d9e 100644 --- a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts @@ -86,3 +86,7 @@ &usb3_phy { status = "okay"; }; + +&usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi index 7e71aec..0ab2ed3 100644 --- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi @@ -121,9 +121,6 @@ }; &pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&pwm_leds>; - pwm_leds: pwm_leds { function = "pwm"; groups = "pwm1_grp", "pwm2_grp", "pwm3_grp"; @@ -131,6 +128,9 @@ }; &pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_leds>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini/Makefile b/arch/arm/boot/dts/gemini/Makefile index f9f63ce..4722fb1 100644 --- a/arch/arm/boot/dts/gemini/Makefile +++ b/arch/arm/boot/dts/gemini/Makefile @@ -2,11 +2,13 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dir-685.dtb \ gemini-dlink-dns-313.dtb \ + gemini-nas4210b.dtb \ gemini-nas4220b.dtb \ gemini-ns2502.dtb \ gemini-rut1xx.dtb \ gemini-sl93512r.dtb \ gemini-sq201.dtb \ gemini-ssi1328.dtb \ + gemini-verbatim-s08v1901-d1.dtb \ gemini-wbd111.dtb \ gemini-wbd222.dtb diff --git a/arch/arm/boot/dts/gemini/gemini-nas4210b.dts b/arch/arm/boot/dts/gemini/gemini-nas4210b.dts new file mode 100644 index 0000000..8bec57c --- /dev/null +++ b/arch/arm/boot/dts/gemini/gemini-nas4210b.dts @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the Gemini-based Raidsonic NAS IB-4210-B + * Based on the NAS Forum experiments by user "CptSpock". + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include + +/ { + model = "Raidsonic NAS IB-4210-B"; + compatible = "raidsonic,ib-4210-b", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { /* 64 MB */ + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-setup { + debounce-interval = <100>; + wakeup-source; + linux,code = ; + label = "Backup button"; + /* Conflict with TVC */ + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; + button-restart { + debounce-interval = <100>; + wakeup-source; + linux,code = ; + label = "Softreset button"; + /* Conflict with TVC */ + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-orange-hdd { + label = "nas4220b:orange:hdd"; + /* Conflict with TVC */ + gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "disk-activity"; + }; + led-green-os { + label = "nas4220b:green:os"; + /* Conflict with TVC */ + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* Realtek RTL8211B */ + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + soc { + flash@30000000 { + status = "okay"; + /* 16MB of flash */ + reg = <0x30000000 0x01000000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x7f>; + }; + }; + + syscon: syscon@40000000 { + pinctrl { + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = + "gpio0egrp", + /* Used by MDIO */ + "gpio0igrp"; + }; + }; + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + /* Lines 28-31 used by LEDs and buttons */ + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + conf0 { + pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV"; + skew-delay = <0>; + }; + conf1 { + pins = "T8 GMAC0 RXC"; + skew-delay = <10>; + }; + conf2 { + pins = "T11 GMAC1 RXC"; + skew-delay = <15>; + }; + conf3 { + pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf4 { + pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC"; + skew-delay = <10>; + }; + conf5 { + /* The data lines all have default skew */ + pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", + "P9 GMAC0 RXD2", "R9 GMAC0 RXD3", + "R11 GMAC1 RXD0", "P11 GMAC1 RXD1", + "V12 GMAC1 RXD2", "U12 GMAC1 RXD3", + "R10 GMAC1 TXD0", "T10 GMAC1 TXD1", + "U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; + skew-delay = <7>; + }; + conf6 { + pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", + "R7 GMAC0 TXD2", "P7 GMAC0 TXD3"; + skew-delay = <5>; + }; + /* Set up drive strength on GMAC0 to 16 mA */ + conf7 { + groups = "gmii_gmac0_grp"; + drive-strength = <16>; + }; + }; + }; + }; + + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + /* Not used in this platform */ + }; + }; + + ide@63000000 { + status = "okay"; + }; + + ide@63400000 { + status = "okay"; + }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts index 6544c73..2488b9b 100644 --- a/arch/arm/boot/dts/gemini/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts @@ -52,6 +52,7 @@ /* Conflict with TVC */ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; default-state = "on"; + linux,default-trigger = "disk-activity"; }; led-green-os { label = "nas4220b:green:os"; diff --git a/arch/arm/boot/dts/gemini/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts index 0ebda4e..4bdf86b 100644 --- a/arch/arm/boot/dts/gemini/gemini-rut1xx.dts +++ b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts @@ -14,13 +14,13 @@ #address-cells = <1>; #size-cells = <1>; - memory@0 { /* 128 MB */ + memory@0 { /* 32 MB */ device_type = "memory"; - reg = <0x00000000 0x8000000>; + reg = <0x00000000 0x2000000>; }; chosen { - bootargs = "console=ttyS0,115200n8"; + bootargs = "console=ttyS0,19200n8"; stdout-path = &uart0; }; @@ -113,6 +113,10 @@ pinctrl-0 = <&gpio1_default_pins>; }; + pci@50000000 { + status = "okay"; + }; + ethernet@60000000 { status = "okay"; @@ -124,13 +128,5 @@ /* Not used in this platform */ }; }; - - usb@68000000 { - status = "okay"; - }; - - usb@69000000 { - status = "okay"; - }; }; }; diff --git a/arch/arm/boot/dts/gemini/gemini-sq201.dts b/arch/arm/boot/dts/gemini/gemini-sq201.dts index bfd1e85..40ee4a0 100644 --- a/arch/arm/boot/dts/gemini/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait"; stdout-path = &uart0; }; diff --git a/arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts b/arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts new file mode 100644 index 0000000..2a689d2 --- /dev/null +++ b/arch/arm/boot/dts/gemini/gemini-verbatim-s08v1901-d1.dts @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the Verbatim S08V1901-D1 + * on product packaging called "Verbatim Gigabit Ethernet Hard Drive" + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include +#include + +/ { + model = "Verbatim Gigabit Ethernet Hard Drive S08V1901-D1"; + compatible = "verbatim,s08v1901-d1", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 64MB SDRAM in 2 x Hynix HY5DU561622ETP-D43 */ + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-reset { + debounce-interval = <50>; + wakeup-source; + linux,code = ; + label = "reset"; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-green-harddisk { + function = LED_FUNCTION_DISK_ACTIVITY; + color = ; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + }; + + /* + * Fan control candidates: gpio0 10, gpio1 28 + */ + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + /* Uses MDC and MDIO */ + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* This is a Realtek RTL8211CL ethernet PHY */ + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + /* + * I haven't found a way to control the fan, it appears to be + * always on. + */ + thermal-zones { + chassis-thermal { + /* Poll every 20 seconds */ + polling-delay = <20000>; + /* Poll every 2nd second when cooling */ + polling-delay-passive = <2000>; + /* Use the thermal sensor in the hard drive */ + thermal-sensors = <&drive0>; + + /* Tripping points from the fan.script in the rootfs */ + trips { + alert: chassis-alert { + /* At 43 degrees turn on the fan */ + temperature = <43000>; + hysteresis = <3000>; + type = "active"; + }; + crit: chassis-crit { + /* Just shut down at 60 degrees */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + soc { + flash@30000000 { + /* + * This is a Spansion S29GL128P11TFI01 852FB245 A + * 128Mbit (16MB) Flash memory. + */ + status = "okay"; + reg = <0x30000000 0x01000000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x7f>; + }; + }; + + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0agrp cover line 0-4 as line 1 is used for the LED + * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", "gpio0hgrp"; + }; + }; + gpio1_default_pins: pinctrl-gpio1 { + /* + * Free up the TVC pins at GPIO1 offset 28,29,30,31 + * line 31 is used for reset key + */ + mux { + function = "gpio1"; + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + /* TODO: investigate vendor registers on boot */ + conf0 { + pins = "V8 GMAC0 RXDV"; + skew-delay = <0>; + }; + conf1 { + pins = "Y7 GMAC0 RXC"; + skew-delay = <15>; + }; + conf2 { + pins = "T8 GMAC0 TXEN"; + skew-delay = <7>; + }; + conf3 { + pins = "U8 GMAC0 TXC"; + skew-delay = <10>; + }; + conf4 { + /* The data lines all have default skew */ + pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1", + "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3", + "T7 GMAC0 TXD0", "U6 GMAC0 TXD1", + "V7 GMAC0 TXD2", "U7 GMAC0 TXD3"; + skew-delay = <7>; + }; + }; + }; + }; + + /* Both interfaces brought out on SATA connectors */ + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + }; + + ide@63000000 { + status = "okay"; + /* + * This drive may have a temperature sensor with a + * thermal zone we can use for thermal control of the + * chassis temperature using the fan. + */ + drive0: ide-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; + }; + + ide@63400000 { + status = "okay"; + }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini/gemini.dtsi b/arch/arm/boot/dts/gemini/gemini.dtsi index befe322..23e68e1 100644 --- a/arch/arm/boot/dts/gemini/gemini.dtsi +++ b/arch/arm/boot/dts/gemini/gemini.dtsi @@ -61,6 +61,12 @@ groups = "rtcgrp"; }; }; + ssp_default_pins: pinctrl-ssp { + mux { + function = "ssp"; + groups = "sspgrp"; + }; + }; power_default_pins: pinctrl-power { mux { function = "power"; @@ -228,6 +234,17 @@ #interrupt-cells = <2>; }; + spi@4a000000 { + compatible = "faraday,ftssp010"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4a000000 0x100>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ssp_default_pins>; + status = "disabled"; + }; + power-controller@4b000000 { compatible = "cortina,gemini-power-controller"; reg = <0x4b000000 0x100>; diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi index 9b54e3c..3043ae7 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi @@ -195,19 +195,19 @@ pci-reset-hog { gpio-hog; - gpios = <7 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; output-high; line-name = "PCI reset"; }; pstn-relay-hog-1 { gpio-hog; - gpios = <11 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; output-low; line-name = "PSTN relay control 1"; }; pstn-relay-hog-2 { gpio-hog; - gpios = <12 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; output-low; line-name = "PSTN relay control 2"; }; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi index 5dc8d33..98cb4ca 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi +++ b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi @@ -37,13 +37,11 @@ }; }; - pmu: pmu@ff111000 { + pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&intc>; interrupts = <0 176 4>, <0 177 4>; interrupt-affinity = <&cpu0>, <&cpu1>; - reg = <0xff111000 0x1000>, - <0xff113000 0x1000>; }; intc: interrupt-controller@fffed000 { diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi index a53a946..ba4c0ca 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi @@ -29,13 +29,11 @@ }; }; - pmu: pmu@ff111000 { + pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&intc>; interrupts = <0 124 4>, <0 125 4>; interrupt-affinity = <&cpu0>, <&cpu1>; - reg = <0xff111000 0x1000>, - <0xff113000 0x1000>; }; intc: interrupt-controller@ffffd000 { diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts index a662df3..5f9b98b 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts @@ -18,9 +18,9 @@ label = "Boot and fpga data"; reg = <0x0 0x02500000>; }; - partition@1c00000 { + partition@2500000 { label = "Root Filesystem - JFFS2"; - reg = <0x02500000 0x05500000>; + reg = <0x02500000 0x3db00000>; }; }; }; diff --git a/arch/arm/boot/dts/mediatek/mt6589.dtsi b/arch/arm/boot/dts/mediatek/mt6589.dtsi index c6babc8..46dea44 100644 --- a/arch/arm/boot/dts/mediatek/mt6589.dtsi +++ b/arch/arm/boot/dts/mediatek/mt6589.dtsi @@ -42,6 +42,17 @@ }; + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + clock-frequency = <13000000>; + arm,cpu-registers-not-fw-configured; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/mediatek/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi index 71ac2b9..aa42377 100644 --- a/arch/arm/boot/dts/mediatek/mt7623.dtsi +++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi @@ -249,7 +249,7 @@ #reset-cells = <1>; }; - pio: pinctrl@10005000 { + pio: pinctrl@1000b000 { compatible = "mediatek,mt7623-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>; @@ -1017,14 +1017,14 @@ }; &pio { - cir_pins_a:cir-default { + cir_pins_a: cir-default-pins { pins-cir { pinmux = ; bias-disable; }; }; - i2c0_pins_a: i2c0-default { + i2c0_pins_a: i2c0-default-pins { pins-i2c0 { pinmux = , ; @@ -1032,40 +1032,40 @@ }; }; - i2c1_pins_a: i2c1-default { - pin-i2c1 { + i2c1_pins_a: i2c1-default-pins { + pins-i2c1 { pinmux = , ; bias-disable; }; }; - i2c1_pins_b: i2c1-alt { - pin-i2c1 { + i2c1_pins_b: i2c1-alt-pins { + pins-i2c1 { pinmux = , ; bias-disable; }; }; - i2c2_pins_a: i2c2-default { - pin-i2c2 { + i2c2_pins_a: i2c2-default-pins { + pins-i2c2 { pinmux = , ; bias-disable; }; }; - i2c2_pins_b: i2c2-alt { - pin-i2c2 { + i2c2_pins_b: i2c2-alt-pins { + pins-i2c2 { pinmux = , ; bias-disable; }; }; - i2s0_pins_a: i2s0-default { - pin-i2s0 { + i2s0_pins_a: i2s0-default-pins { + pins-i2s0 { pinmux = , , , @@ -1076,8 +1076,8 @@ }; }; - i2s1_pins_a: i2s1-default { - pin-i2s1 { + i2s1_pins_a: i2s1-default-pins { + pins-i2s1 { pinmux = , , , @@ -1088,7 +1088,7 @@ }; }; - key_pins_a: keys-alt { + key_pins_a: keys-alt-pins { pins-keys { pinmux = , ; @@ -1096,7 +1096,7 @@ }; }; - led_pins_a: leds-alt { + led_pins_a: leds-alt-pins { pins-leds { pinmux = , , @@ -1104,7 +1104,7 @@ }; }; - mmc0_pins_default: mmc0default { + mmc0_pins_default: mmc0-default-pins { pins-cmd-dat { pinmux = , , @@ -1130,7 +1130,7 @@ }; }; - mmc0_pins_uhs: mmc0 { + mmc0_pins_uhs: mmc0-uhs-pins { pins-cmd-dat { pinmux = , , @@ -1158,7 +1158,7 @@ }; }; - mmc1_pins_default: mmc1default { + mmc1_pins_default: mmc1-default-pins { pins-cmd-dat { pinmux = , , @@ -1188,7 +1188,7 @@ }; }; - mmc1_pins_uhs: mmc1 { + mmc1_pins_uhs: mmc1-uhs-pins { pins-cmd-dat { pinmux = , , @@ -1207,7 +1207,7 @@ }; }; - nand_pins_default: nanddefault { + nand_pins_default: nand-default-pins { pins-ale { pinmux = ; drive-strength = <8>; @@ -1236,15 +1236,15 @@ }; }; - pcie_default: pcie_pin_default { - pins_cmd_dat { + pcie_default: pcie-default-pins { + pins-cmd-dat { pinmux = , ; bias-disable; }; }; - pwm_pins_a: pwm-default { + pwm_pins_a: pwm-default-pins { pins-pwm { pinmux = , , @@ -1254,7 +1254,7 @@ }; }; - spi0_pins_a: spi0-default { + spi0_pins_a: spi0-default-pins { pins-spi { pinmux = , , @@ -1264,7 +1264,7 @@ }; }; - spi1_pins_a: spi1-default { + spi1_pins_a: spi1-default-pins { pins-spi { pinmux = , , @@ -1273,7 +1273,7 @@ }; }; - spi2_pins_a: spi2-default { + spi2_pins_a: spi2-default-pins { pins-spi { pinmux = , , @@ -1282,28 +1282,28 @@ }; }; - uart0_pins_a: uart0-default { + uart0_pins_a: uart0-default-pins { pins-dat { pinmux = , ; }; }; - uart1_pins_a: uart1-default { + uart1_pins_a: uart1-default-pins { pins-dat { pinmux = , ; }; }; - uart2_pins_a: uart2-default { + uart2_pins_a: uart2-default-pins { pins-dat { pinmux = , ; }; }; - uart2_pins_b: uart2-alt { + uart2_pins_b: uart2-alt-pins { pins-dat { pinmux = , ; diff --git a/arch/arm/boot/dts/mediatek/mt8135.dtsi b/arch/arm/boot/dts/mediatek/mt8135.dtsi index 0f291ad..b03bd98 100644 --- a/arch/arm/boot/dts/mediatek/mt8135.dtsi +++ b/arch/arm/boot/dts/mediatek/mt8135.dtsi @@ -148,7 +148,7 @@ * Pinctrl access register at 0x10005000 and 0x1020c000 through * regmap. Register 0x1000b000 is used by EINT. */ - pio: pinctrl@10005000 { + pio: pinctrl@1000b000 { compatible = "mediatek,mt8135-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>; diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi index 67253bb..ec20084 100644 --- a/arch/arm/boot/dts/microchip/sama7d65.dtsi +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -1055,5 +1055,13 @@ #address-cells = <0>; interrupt-controller; }; + + i3c: i3c@e9000000 { + compatible = "microchip,sama7d65-i3c-hci"; + reg = <0xe9000000 0x300>; + interrupts = ; + clocks = <&pmc PMC_TYPE_PERIPHERAL 105>, <&pmc PMC_TYPE_GCK 105>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/nvidia/tegra114-peripherals-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra114-peripherals-opp.dtsi new file mode 100644 index 0000000..bab6122 --- /dev/null +++ b/arch/arm/boot/dts/nvidia/tegra114-peripherals-opp.dtsi @@ -0,0 +1,1439 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + core_opp_table: opp-table-core { + compatible = "operating-points-v2"; + opp-shared; + + core_opp_900: opp-900000 { + opp-microvolt = <900000 900000 1390000>; + opp-level = <900000>; + }; + + core_opp_950: opp-950000 { + opp-microvolt = <950000 950000 1390000>; + opp-level = <950000>; + }; + + core_opp_1000: opp-1000000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-level = <1000000>; + }; + + core_opp_1050: opp-1050000 { + opp-microvolt = <1050000 1050000 1390000>; + opp-level = <1050000>; + }; + + core_opp_1100: opp-1100000 { + opp-microvolt = <1100000 1100000 1390000>; + opp-level = <1100000>; + }; + + core_opp_1120: opp-1120000 { + opp-microvolt = <1120000 1120000 1390000>; + opp-level = <1120000>; + }; + + core_opp_1150: opp-1150000 { + opp-microvolt = <1150000 1150000 1390000>; + opp-level = <1150000>; + }; + + core_opp_1170: opp-1170000 { + opp-microvolt = <1170000 1170000 1390000>; + opp-level = <1170000>; + }; + + core_opp_1200: opp-1200000 { + opp-microvolt = <1200000 1200000 1390000>; + opp-level = <1200000>; + }; + + core_opp_1250: opp-1250000 { + opp-microvolt = <1250000 1250000 1390000>; + opp-level = <1250000>; + }; + + core_opp_1300: opp-1300000 { + opp-microvolt = <1300000 1300000 1390000>; + opp-level = <1300000>; + }; + + core_opp_1350: opp-1350000 { + opp-microvolt = <1350000 1350000 1390000>; + opp-level = <1350000>; + }; + + core_opp_1390: opp-1390000 { + opp-microvolt = <1390000 1390000 1390000>; + opp-level = <1390000>; + }; + }; + + emc_icc_dvfs_opp_table: opp-table-emc { + compatible = "operating-points-v2"; + + opp-12750000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-20400000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-40800000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-68000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-102000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-204000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + opp-suspend; + }; + + opp-312000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <312000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp-408000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + /* + * T40X can work with 1050mV for 528MHz but T40T which is + * in the same group as T40X requires 1100mV. If there will + * be enough data that T40T can work reliably with 1050mV + * for 528MHz then voltage for 528MHz opp can be lowered. + * T40S should remain with 1100mV for 528MHz opp. + */ + opp-528000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + + opp-624000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <624000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + + opp-792000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <792000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + + opp-900000000-1200 { + opp-microvolt = <1200000 1200000 1390000>; + opp-hz = /bits/ 64 <900000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1200>; + }; + }; + + emc_bw_dfs_opp_table: opp-table-actmon { + compatible = "operating-points-v2"; + + opp-12750000 { + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <204000>; + }; + + opp-20400000 { + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <326400>; + }; + + opp-40800000 { + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <652800>; + }; + + opp-68000000 { + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <1088000>; + }; + + opp-102000000 { + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <1632000>; + }; + + opp-204000000 { + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <3264000>; + opp-suspend; + }; + + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <4992000>; + }; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <6528000>; + }; + + opp-528000000 { + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <8448000>; + }; + + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <9984000>; + }; + + opp-792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <12672000>; + }; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-supported-hw = <0x000E>; + opp-peak-kBps = <14400000>; + }; + }; + + vi_dvfs_opp_table: opp-table-vi { + compatible = "operating-points-v2"; + + opp-114000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <114000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-216000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp-240000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <240000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp-312000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <312000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1050>; + }; + + opp-372000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <372000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp-408000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1050>; + }; + + opp-408000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1120>; + }; + }; + + epp_dvfs_opp_table: opp-table-epp { + compatible = "operating-points-v2"; + + opp-192000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <192000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_900>; + }; + + opp-240000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <240000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_900>; + }; + + opp-228000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <228000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp-300000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_950>; + }; + + opp-300000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp-384000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1000>; + }; + + opp-396000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1050>; + }; + + opp-468000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <468000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1050>; + }; + + opp-492000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <492000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp-528000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1100>; + }; + + opp-516000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <516000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1120>; + }; + + opp-564000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <564000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1120>; + }; + + opp-552000000-1170 { + opp-microvolt = <1170000 1170000 1390000>; + opp-hz = /bits/ 64 <552000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1170>; + }; + + opp-600000000-1170 { + opp-microvolt = <1170000 1170000 1390000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1170>; + }; + + opp-600000000-1250 { + opp-microvolt = <1250000 1250000 1390000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1250>; + }; + + opp-636000000-1200 { + opp-microvolt = <1200000 1200000 1390000>; + opp-hz = /bits/ 64 <636000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1200>; + }; + + opp-672000000-1250 { + opp-microvolt = <1250000 1250000 1390000>; + opp-hz = /bits/ 64 <672000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1250>; + }; + + opp-828000000-1390 { + opp-microvolt = <1390000 1390000 1390000>; + opp-hz = /bits/ 64 <828000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1390>; + }; + }; + + gr2d_dvfs_opp_table: opp-table-gr2d { + compatible = "operating-points-v2"; + + opp-192000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <192000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_900>; + }; + + opp-240000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <240000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_900>; + }; + + opp-228000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <228000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp-300000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_950>; + }; + + opp-300000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp-384000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1000>; + }; + + opp-396000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1050>; + }; + + opp-468000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <468000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1050>; + }; + + opp-492000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <492000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp-528000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1100>; + }; + + opp-516000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <516000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1120>; + }; + + opp-564000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <564000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1120>; + }; + + opp-552000000-1170 { + opp-microvolt = <1170000 1170000 1390000>; + opp-hz = /bits/ 64 <552000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1170>; + }; + + opp-600000000-1170 { + opp-microvolt = <1170000 1170000 1390000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1170>; + }; + + opp-600000000-1250 { + opp-microvolt = <1250000 1250000 1390000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1250>; + }; + + opp-636000000-1200 { + opp-microvolt = <1200000 1200000 1390000>; + opp-hz = /bits/ 64 <636000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1200>; + }; + + opp-672000000-1250 { + opp-microvolt = <1250000 1250000 1390000>; + opp-hz = /bits/ 64 <672000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1250>; + }; + + opp-828000000-1390 { + opp-microvolt = <1390000 1390000 1390000>; + opp-hz = /bits/ 64 <828000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1390>; + }; + }; + + gr3d_dvfs_opp_table: opp-table-gr3d { + compatible = "operating-points-v2"; + + opp-192000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <192000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_900>; + }; + + opp-240000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <240000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_900>; + }; + + opp-228000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <228000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp-300000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_950>; + }; + + opp-300000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp-384000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1000>; + }; + + opp-396000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1050>; + }; + + opp-468000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <468000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1050>; + }; + + opp-492000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <492000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp-528000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1100>; + }; + + opp-516000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <516000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1120>; + }; + + opp-564000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <564000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1120>; + }; + + opp-552000000-1170 { + opp-microvolt = <1170000 1170000 1390000>; + opp-hz = /bits/ 64 <552000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1170>; + }; + + opp-600000000-1170 { + opp-microvolt = <1170000 1170000 1390000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1170>; + }; + + opp-600000000-1250 { + opp-microvolt = <1250000 1250000 1390000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1250>; + }; + + opp-636000000-1200 { + opp-microvolt = <1200000 1200000 1390000>; + opp-hz = /bits/ 64 <636000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1200>; + }; + + opp-672000000-1250 { + opp-microvolt = <1250000 1250000 1390000>; + opp-hz = /bits/ 64 <672000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1250>; + }; + + opp-828000000-1390 { + opp-microvolt = <1390000 1390000 1390000>; + opp-hz = /bits/ 64 <828000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1390>; + }; + }; + + msenc_dvfs_opp_table: opp-table-msenc { + compatible = "operating-points-v2"; + + opp-144000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <144000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_900>; + }; + + opp-182000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <182000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp-204000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_900>; + }; + + opp-240000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <240000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp-252000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <252000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_950>; + }; + + opp-312000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <312000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1050>; + }; + + opp-324000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <324000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1000>; + }; + + opp-384000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp-408000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1050>; + }; + + opp-432000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <432000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1120>; + }; + + opp-456000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <456000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1100>; + }; + + opp-480000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1120>; + }; + + opp-480000000-1170 { + opp-microvolt = <1170000 1170000 1390000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1170>; + }; + }; + + tsec_dvfs_opp_table: opp-table-tsec { + compatible = "operating-points-v2"; + + opp-144000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <144000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_900>; + }; + + opp-182000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <182000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp-204000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_900>; + }; + + opp-240000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <240000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp-252000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <252000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_950>; + }; + + opp-312000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <312000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1050>; + }; + + opp-324000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <324000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1000>; + }; + + opp-384000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp-408000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1050>; + }; + + opp-432000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <432000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1120>; + }; + + opp-456000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <456000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1100>; + }; + + opp-480000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1120>; + }; + + opp-480000000-1170 { + opp-microvolt = <1170000 1170000 1390000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1170>; + }; + }; + + vde_dvfs_opp_table: opp-table-vde { + compatible = "operating-points-v2"; + + opp-144000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <144000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_900>; + }; + + opp-182000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <182000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp-204000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_900>; + }; + + opp-240000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <240000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp-252000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <252000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_950>; + }; + + opp-312000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <312000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1050>; + }; + + opp-324000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <324000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1000>; + }; + + opp-384000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp-408000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1050>; + }; + + opp-432000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <432000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1120>; + }; + + opp-456000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <456000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1100>; + }; + + opp-480000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1120>; + }; + + opp-480000000-1170 { + opp-microvolt = <1170000 1170000 1390000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1170>; + }; + }; + + host1x_dvfs_opp_table: opp-table-host1x { + compatible = "operating-points-v2"; + + opp-144000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <144000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_900>; + }; + + opp-180000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <180000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_900>; + }; + + opp-188000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <188000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp-228000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <228000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_950>; + }; + + opp-240000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <240000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp-276000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <276000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1000>; + }; + + opp-276000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <276000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1050>; + }; + + opp-324000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <324000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp-336000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <336000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1050>; + }; + + opp-336000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <336000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1120>; + }; + + opp-372000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <372000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1100>; + }; + + opp-384000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x000E>; + required-opps = <&core_opp_1120>; + }; + }; + + pll_m_dvfs_opp_table: opp-table-pllm { + compatible = "operating-points-v2"; + + opp-800000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-1066000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <1066000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + pll_c_dvfs_opp_table: opp-table-pllc { + compatible = "operating-points-v2"; + + opp-800000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-1066000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <1066000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + pll_c2_dvfs_opp_table: opp-table-pllc2 { + compatible = "operating-points-v2"; + + opp-800000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-1066000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <1066000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + pll_c3_dvfs_opp_table: opp-table-pllc3 { + compatible = "operating-points-v2"; + + opp-800000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-1066000000-1000 { + opp-microvolt = <1000000 1000000 1390000>; + opp-hz = /bits/ 64 <1066000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + sbc1_dvfs_opp_table: opp-table-sbc1 { + compatible = "operating-points-v2"; + + opp-48000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <48000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-52000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + sbc2_dvfs_opp_table: opp-table-sbc2 { + compatible = "operating-points-v2"; + + opp-48000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <48000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-52000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + sbc3_dvfs_opp_table: opp-table-sbc3 { + compatible = "operating-points-v2"; + + opp-48000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <48000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-52000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + sbc4_dvfs_opp_table: opp-table-sbc4 { + compatible = "operating-points-v2"; + + opp-48000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <48000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-52000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + sbc5_dvfs_opp_table: opp-table-sbc5 { + compatible = "operating-points-v2"; + + opp-48000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <48000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-52000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + sbc6_dvfs_opp_table: opp-table-sbc6 { + compatible = "operating-points-v2"; + + opp-48000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <48000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-52000000-1100 { + opp-microvolt = <1100000 1100000 1390000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + sdmmc1_dvfs_opp_table: opp-table-sdmmc1 { + compatible = "operating-points-v2"; + + opp-81600000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <81600000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp-156000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <156000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1120>; + }; + + opp-204000000-1250 { + opp-microvolt = <1250000 1250000 1390000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1250>; + }; + }; + + sdmmc3_dvfs_opp_table: opp-table-sdmmc3 { + compatible = "operating-points-v2"; + + opp-81600000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <81600000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp-156000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <156000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1120>; + }; + + opp-204000000-1250 { + opp-microvolt = <1250000 1250000 1390000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1250>; + }; + }; + + sdmmc4_dvfs_opp_table: opp-table-sdmmc4 { + compatible = "operating-points-v2"; + + opp-81600000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <81600000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp-156000000-1120 { + opp-microvolt = <1120000 1120000 1390000>; + opp-hz = /bits/ 64 <156000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1120>; + }; + + opp-200000000-1250 { + opp-microvolt = <1250000 1250000 1390000>; + opp-hz = /bits/ 64 <200000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1250>; + }; + }; + + hdmi_dvfs_opp_table: opp-table-hdmi { + compatible = "operating-points-v2"; + + opp-148500000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <148500000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-297000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <297000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + }; + + disp1_dvfs_opp_table: opp-table-disp1 { + compatible = "operating-points-v2"; + + opp-166000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <166000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-297000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <297000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + }; + + disp2_dvfs_opp_table: opp-table-disp2 { + compatible = "operating-points-v2"; + + opp-166000000-900 { + opp-microvolt = <900000 900000 1390000>; + opp-hz = /bits/ 64 <166000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_900>; + }; + + opp-297000000-1050 { + opp-microvolt = <1050000 1050000 1390000>; + opp-hz = /bits/ 64 <297000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + }; + + xusb_falcon_dvfs_opp_table: opp-table-xusb-falcon { + compatible = "operating-points-v2"; + + opp-336000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <336000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + }; + + xusb_host_dvfs_opp_table: opp-table-xusb-host { + compatible = "operating-points-v2"; + + opp-112000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <112000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + }; + + xusb_dev_dvfs_opp_table: opp-table-xusb-dev { + compatible = "operating-points-v2"; + + opp-58300000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <58300000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + }; + + xusb_ss_dvfs_opp_table: opp-table-xusb-ss { + compatible = "operating-points-v2"; + + opp-122400000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <122400000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + }; + + xusb_fs_dvfs_opp_table: opp-table-xusb-fs { + compatible = "operating-points-v2"; + + opp-48000000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <48000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + }; + + xusb_hs_dvfs_opp_table: opp-table-xusb-hs { + compatible = "operating-points-v2"; + + opp-61200000-950 { + opp-microvolt = <950000 950000 1390000>; + opp-hz = /bits/ 64 <61200000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + }; + + /* Add usbd, usb2 and usb3 opp tables if needed */ +}; diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi index 7e8f90d..a5958f3 100644 --- a/arch/arm/boot/dts/nvidia/tegra114.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi @@ -8,6 +8,8 @@ #include #include +#include "tegra114-peripherals-opp.dtsi" + / { compatible = "nvidia,tegra114"; interrupt-parent = <&lic>; @@ -56,6 +58,8 @@ clocks = <&tegra_car TEGRA114_CLK_VI>; resets = <&tegra_car 20>; reset-names = "vi"; + power-domains = <&pd_venc>; + operating-points-v2 = <&vi_dvfs_opp_table>; iommus = <&mc TEGRA_SWGROUP_VI>; @@ -69,6 +73,8 @@ clocks = <&tegra_car TEGRA114_CLK_EPP>; resets = <&tegra_car TEGRA114_CLK_EPP>; reset-names = "epp"; + power-domains = <&pd_heg>; + operating-points-v2 = <&epp_dvfs_opp_table>; iommus = <&mc TEGRA_SWGROUP_EPP>; @@ -82,6 +88,7 @@ clocks = <&tegra_car TEGRA114_CLK_ISP>; resets = <&tegra_car TEGRA114_CLK_ISP>; reset-names = "isp"; + power-domains = <&pd_venc>; iommus = <&mc TEGRA_SWGROUP_ISP>; @@ -95,6 +102,8 @@ clocks = <&tegra_car TEGRA114_CLK_GR2D>; resets = <&tegra_car 21>, <&mc TEGRA114_MC_RESET_2D>; reset-names = "2d", "mc"; + power-domains = <&pd_heg>; + operating-points-v2 = <&gr2d_dvfs_opp_table>; iommus = <&mc TEGRA_SWGROUP_G2>; }; @@ -105,6 +114,8 @@ clocks = <&tegra_car TEGRA114_CLK_GR3D>; resets = <&tegra_car 24>, <&mc TEGRA114_MC_RESET_3D>; reset-names = "3d", "mc"; + power-domains = <&pd_3d>; + operating-points-v2 = <&gr3d_dvfs_opp_table>; iommus = <&mc TEGRA_SWGROUP_NV>; }; @@ -118,11 +129,24 @@ clock-names = "dc", "parent"; resets = <&tegra_car 27>; reset-names = "dc"; + power-domains = <&pd_core>; + operating-points-v2 = <&disp1_dvfs_opp_table>; iommus = <&mc TEGRA_SWGROUP_DC>; nvidia,head = <0>; + interconnects = <&mc TEGRA114_MC_DISPLAY0A &emc>, + <&mc TEGRA114_MC_DISPLAY0B &emc>, + <&mc TEGRA114_MC_DISPLAY1B &emc>, + <&mc TEGRA114_MC_DISPLAY0C &emc>, + <&mc TEGRA114_MC_DISPLAYHC &emc>; + interconnect-names = "wina", + "winb", + "winb-vfilter", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -137,11 +161,24 @@ clock-names = "dc", "parent"; resets = <&tegra_car 26>; reset-names = "dc"; + power-domains = <&pd_core>; + operating-points-v2 = <&disp2_dvfs_opp_table>; iommus = <&mc TEGRA_SWGROUP_DCB>; nvidia,head = <1>; + interconnects = <&mc TEGRA114_MC_DISPLAY0AB &emc>, + <&mc TEGRA114_MC_DISPLAY0BB &emc>, + <&mc TEGRA114_MC_DISPLAY1BB &emc>, + <&mc TEGRA114_MC_DISPLAY0CB &emc>, + <&mc TEGRA114_MC_DISPLAYHCB &emc>; + interconnect-names = "wina", + "winb", + "winb-vfilter", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -156,6 +193,8 @@ clock-names = "hdmi", "parent"; resets = <&tegra_car 51>; reset-names = "hdmi"; + power-domains = <&pd_core>; + operating-points-v2 = <&hdmi_dvfs_opp_table>; status = "disabled"; }; @@ -169,6 +208,7 @@ resets = <&tegra_car 48>; reset-names = "dsi"; nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */ + power-domains = <&pd_core>; status = "disabled"; #address-cells = <1>; @@ -185,6 +225,7 @@ resets = <&tegra_car 82>; reset-names = "dsi"; nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */ + power-domains = <&pd_core>; status = "disabled"; #address-cells = <1>; @@ -198,6 +239,8 @@ clocks = <&tegra_car TEGRA114_CLK_MSENC>; resets = <&tegra_car TEGRA114_CLK_MSENC>; reset-names = "mpe"; + power-domains = <&pd_mpe>; + operating-points-v2 = <&msenc_dvfs_opp_table>; iommus = <&mc TEGRA_SWGROUP_MSENC>; @@ -210,6 +253,8 @@ interrupts = ; clocks = <&tegra_car TEGRA114_CLK_TSEC>; resets = <&tegra_car TEGRA114_CLK_TSEC>; + power-domains = <&pd_core>; + operating-points-v2 = <&tsec_dvfs_opp_table>; iommus = <&mc TEGRA_SWGROUP_TSEC>; @@ -323,6 +368,9 @@ clock-names = "actmon", "emc"; resets = <&tegra_car TEGRA114_CLK_ACTMON>; reset-names = "actmon"; + operating-points-v2 = <&emc_bw_dfs_opp_table>; + interconnects = <&mc TEGRA114_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; #cooling-cells = <2>; }; @@ -366,6 +414,8 @@ reset-names = "vde", "mc"; resets = <&tegra_car 61>, <&mc TEGRA114_MC_RESET_VDE>; iommus = <&mc TEGRA_SWGROUP_VDE>; + power-domains = <&pd_vde>; + operating-points-v2 = <&vde_dvfs_opp_table>; }; apbmisc@70000800 { @@ -443,6 +493,7 @@ clocks = <&tegra_car TEGRA114_CLK_PWM>; resets = <&tegra_car 17>; reset-names = "pwm"; + power-domains = <&pd_core>; status = "disabled"; }; @@ -533,6 +584,8 @@ reset-names = "spi"; dmas = <&apbdma 15>, <&apbdma 15>; dma-names = "rx", "tx"; + power-domains = <&pd_core>; + operating-points-v2 = <&sbc1_dvfs_opp_table>; status = "disabled"; }; @@ -548,6 +601,8 @@ reset-names = "spi"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; + power-domains = <&pd_core>; + operating-points-v2 = <&sbc2_dvfs_opp_table>; status = "disabled"; }; @@ -563,6 +618,8 @@ reset-names = "spi"; dmas = <&apbdma 17>, <&apbdma 17>; dma-names = "rx", "tx"; + power-domains = <&pd_core>; + operating-points-v2 = <&sbc3_dvfs_opp_table>; status = "disabled"; }; @@ -578,6 +635,8 @@ reset-names = "spi"; dmas = <&apbdma 18>, <&apbdma 18>; dma-names = "rx", "tx"; + power-domains = <&pd_core>; + operating-points-v2 = <&sbc4_dvfs_opp_table>; status = "disabled"; }; @@ -593,6 +652,8 @@ reset-names = "spi"; dmas = <&apbdma 27>, <&apbdma 27>; dma-names = "rx", "tx"; + power-domains = <&pd_core>; + operating-points-v2 = <&sbc5_dvfs_opp_table>; status = "disabled"; }; @@ -608,6 +669,8 @@ reset-names = "spi"; dmas = <&apbdma 28>, <&apbdma 28>; dma-names = "rx", "tx"; + power-domains = <&pd_core>; + operating-points-v2 = <&sbc6_dvfs_opp_table>; status = "disabled"; }; @@ -634,6 +697,86 @@ clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; #clock-cells = <1>; + + pd_core: core-domain { + #power-domain-cells = <0>; + operating-points-v2 = <&core_opp_table>; + }; + + powergates { + /* + * TODO: Add DIS and DISB domains once DC is able + * to handle them properly. VENC and DISB should + * set DIS as their source power domain due to + * internal dependency. + */ + + pd_heg: heg { + clocks = <&tegra_car TEGRA114_CLK_GR2D>, + <&tegra_car TEGRA114_CLK_EPP>; + resets = <&mc TEGRA114_MC_RESET_2D>, + <&mc TEGRA114_MC_RESET_EPP>, + <&tegra_car TEGRA114_CLK_GR2D>, + <&tegra_car TEGRA114_CLK_EPP>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_mpe: mpe { + clocks = <&tegra_car TEGRA114_CLK_MSENC>; + resets = <&mc TEGRA114_MC_RESET_MPE>, + <&tegra_car TEGRA114_CLK_MSENC>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_3d: td { + clocks = <&tegra_car TEGRA114_CLK_GR3D>; + resets = <&mc TEGRA114_MC_RESET_3D>, + <&tegra_car TEGRA114_CLK_GR3D>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_vde: vdec { + clocks = <&tegra_car TEGRA114_CLK_VDE>; + resets = <&mc TEGRA114_MC_RESET_VDE>, + <&tegra_car TEGRA114_CLK_VDE>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_venc: venc { + clocks = <&tegra_car TEGRA114_CLK_ISP>, + <&tegra_car TEGRA114_CLK_VI>, + <&tegra_car TEGRA114_CLK_CSI>; + resets = <&mc TEGRA114_MC_RESET_ISP>, + <&mc TEGRA114_MC_RESET_VI>, + <&tegra_car TEGRA114_CLK_ISP>, + <&tegra_car 20 /* VI */>, + <&tegra_car TEGRA114_CLK_CSI>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_xusbss: xusba { + clocks = <&tegra_car TEGRA114_CLK_XUSB_SS>; + resets = <&tegra_car TEGRA114_CLK_XUSB_SS>; + #power-domain-cells = <0>; + }; + + pd_xusbdev: xusbb { + clocks = <&tegra_car TEGRA114_CLK_XUSB_DEV>; + resets = <&tegra_car 95>; + #power-domain-cells = <0>; + }; + + pd_xusbhost: xusbc { + clocks = <&tegra_car TEGRA114_CLK_XUSB_HOST>; + resets = <&tegra_car TEGRA114_CLK_XUSB_HOST>; + #power-domain-cells = <0>; + }; + }; }; fuse@7000f800 { @@ -643,6 +786,7 @@ clock-names = "fuse"; resets = <&tegra_car 39>; reset-names = "fuse"; + power-domains = <&pd_core>; }; mc: memory-controller@70019000 { @@ -655,6 +799,7 @@ #reset-cells = <1>; #iommu-cells = <1>; + #interconnect-cells = <1>; }; emc: external-memory-controller@7001b000 { @@ -663,8 +808,12 @@ interrupts = ; clocks = <&tegra_car TEGRA114_CLK_EMC>; clock-names = "emc"; + power-domains = <&pd_core>; nvidia,memory-controller = <&mc>; + operating-points-v2 = <&emc_icc_dvfs_opp_table>; + + #interconnect-cells = <0>; }; hda@70030000 { @@ -854,6 +1003,8 @@ clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; + power-domains = <&pd_core>; + operating-points-v2 = <&sdmmc1_dvfs_opp_table>; status = "disabled"; }; @@ -876,6 +1027,8 @@ clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; + power-domains = <&pd_core>; + operating-points-v2 = <&sdmmc3_dvfs_opp_table>; status = "disabled"; }; @@ -887,6 +1040,8 @@ clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; + power-domains = <&pd_core>; + operating-points-v2 = <&sdmmc4_dvfs_opp_table>; status = "disabled"; }; @@ -899,6 +1054,7 @@ resets = <&tegra_car 22>; reset-names = "usb"; nvidia,phy = <&phy1>; + power-domains = <&pd_core>; status = "disabled"; }; @@ -939,6 +1095,7 @@ resets = <&tegra_car 59>; reset-names = "usb"; nvidia,phy = <&phy3>; + power-domains = <&pd_core>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi index 974c76f..89a749c 100644 --- a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi @@ -14,6 +14,11 @@ stdout-path = "serial0:115200n8"; }; + firmware { + #address-cells = <1>; + #size-cells = <1>; + }; + /* * Note that recent version of the device tree compiler (starting with * version 1.4.2) warn about this node containing a reg property, but diff --git a/arch/arm/boot/dts/nvidia/tegra124-venice2.dts b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts index df98dc2..059ee6c 100644 --- a/arch/arm/boot/dts/nvidia/tegra124-venice2.dts +++ b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts @@ -18,6 +18,11 @@ stdout-path = "serial0:115200n8"; }; + firmware { + #address-cells = <1>; + #size-cells = <1>; + }; + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi index b48f53c..5b758aa 100644 --- a/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi @@ -79,9 +79,11 @@ pll-supply = <&hdmi_pll_reg>; hdmi-supply = <&vdd_hdmi_en>; - nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) - GPIO_ACTIVE_HIGH>; + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; }; }; @@ -1017,6 +1019,20 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "d"; + + hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + ddc-i2c-bus = <&hdmi_ddc>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + i2cmux { compatible = "i2c-mux-pinctrl"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi index 15f53ba..892d718 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi @@ -2,6 +2,7 @@ #include #include +#include #include #include @@ -84,6 +85,93 @@ }; }; + host1x@50000000 { + vi@54080000 { + status = "okay"; + + csi@800 { + status = "okay"; + + avdd-dsi-csi-supply = <&avdd_dsi_csi>; + + /* CSI-A */ + channel@0 { + reg = <0>; + + nvidia,mipi-calibrate = <&csi 0>; /* CSIA pad */ + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csia_input: endpoint { + data-lanes = <1 2>; + /* No rear camera */ + }; + }; + + port@1 { + reg = <1>; + + csia_output: endpoint { + remote-endpoint = <&vi_ppa_input>; + }; + }; + }; + + /* CSI-B */ + channel@1 { + reg = <1>; + + nvidia,mipi-calibrate = <&csi 1>; /* CSIB pad */ + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csib_input: endpoint { + data-lanes = <3>; + remote-endpoint = <&front_camera_output>; + }; + }; + + port@1 { + reg = <1>; + + csib_output: endpoint { + remote-endpoint = <&vi_ppb_input>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vi_ppa_input: endpoint { + remote-endpoint = <&csia_output>; + }; + }; + + port@1 { + reg = <1>; + + vi_ppb_input: endpoint { + remote-endpoint = <&csib_output>; + }; + }; + }; + }; + }; + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -890,6 +978,36 @@ vdd-supply = <&vdd_3v3_sys>; }; + /* Aptina 1/6" HD SOC (MI1040) */ + front-camera@48 { + compatible = "aptina,mi1040"; + reg = <0x48>; + + clocks = <&tegra_car TEGRA30_CLK_CSUS>; + + reset-gpios = <&gpio TEGRA_GPIO(O, 0) GPIO_ACTIVE_LOW>; + + vddio-supply = <&avdd_cam1>; + vdd-supply = <&vddio_cam>; + vaa-supply = <&avdd_cam1>; + + orientation = <0>; /* Front camera */ + + assigned-clocks = <&tegra_car TEGRA30_CLK_VI_SENSOR>, + <&tegra_car TEGRA30_CLK_CSUS>; + assigned-clock-rates = <24000000>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>, + <&tegra_car TEGRA30_CLK_VI_SENSOR>; + + port { + front_camera_output: endpoint { + bus-type = ; + link-frequencies = /bits/ 64 <384000000>; + remote-endpoint = <&csib_input>; + }; + }; + }; + accelerometer@68 { compatible = "invensense,mpu6050"; reg = <0x68>; @@ -1203,6 +1321,16 @@ vin-supply = <&vdd_5v0_sys>; }; + avdd_cam1: regulator-vcam1 { + compatible = "regulator-fixed"; + regulator-name = "avdd_cam1"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + sound { compatible = "nvidia,tegra-audio-rt5640-grouper", "nvidia,tegra-audio-rt5640"; diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi index 694c7fe..4bd9893 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi @@ -135,7 +135,7 @@ regulator-boot-on; }; - ldo5 { + vddio_cam: ldo5 { regulator-name = "vdd_camera"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -149,7 +149,7 @@ regulator-boot-on; }; - ldo7 { + avdd_dsi_csi: ldo7 { regulator-name = "avdd_dsi_csi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi index ee4a3f4..8fe3c62 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi @@ -92,13 +92,13 @@ regulator-always-on; }; - ldo5 { + vddio_cam: ldo5 { regulator-name = "vddio_sdmmc,avdd_vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo6 { + avdd_dsi_csi: ldo6 { regulator-name = "avdd_dsi_csi,pwrdet_mipi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts index 9296e79..5c634b0 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts +++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts @@ -23,6 +23,7 @@ rtc0 = &pmic; rtc1 = "/rtc@7000e000"; + display0 = &lcd; display1 = &hdmi; serial1 = &uartc; /* Bluetooth */ @@ -55,6 +56,37 @@ }; host1x@50000000 { + vi@54080000 { + status = "okay"; + + csi@800 { + status = "okay"; + + avdd-dsi-csi-supply = <&avdd_dsi_csi>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vi_ppa_input: endpoint { + /* Link to the rear camera */ + }; + }; + + port@1 { + reg = <1>; + + vi_ppb_input: endpoint { + /* Link to the front camera */ + }; + }; + }; + }; + hdmi: hdmi@54280000 { status = "okay"; @@ -68,6 +100,22 @@ }; }; }; + + lcd: dsi@54300000 { + status = "okay"; + + avdd-dsi-csi-supply = <&avdd_dsi_csi>; + + panel@0 { + compatible = "hydis,hv101hd1"; + reg = <0>; + + vdd-supply = <&vdd_panel>; + vio-supply = <&vio_panel>; + + backlight = <&backlight>; + }; + }; }; vde@6001a000 { @@ -1043,9 +1091,9 @@ vdd-supply = <&vdd_3v3_sys>; vddio-supply = <&vdd_1v8_vio>; - mount-matrix = "0", "-1", "0", - "-1", "0", "0", - "0", "0", "-1"; + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "1"; /* External I2C interface */ i2c-gate { @@ -1123,11 +1171,10 @@ }; regulators { - vdd_lcd: vdd1 { + vio_panel: vdd1 { regulator-name = "vddio_ddr_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <8>; }; @@ -2145,7 +2192,7 @@ compatible = "pwm-backlight"; enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - power-supply = <&vdd_5v0_bl>; + power-supply = <&vdd_5v0_sys>; pwms = <&pwm 0 71428>; brightness-levels = <1 255>; @@ -2375,15 +2422,15 @@ vin-supply = <&vdd_3v3_sys>; }; - vdd_5v0_bl: regulator-bl { + vdd_panel: regulator-panel { compatible = "regulator-fixed"; - regulator-name = "vdd_5v0_bl"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + regulator-name = "vdd_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; - gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>; enable-active-high; - vin-supply = <&vdd_5v0_bat>; + vin-supply = <&vdd_3v3_sys>; }; hdmi_5v0_sys: regulator-hdmi { diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi index ead9530..bf1c3a3 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi @@ -2,6 +2,7 @@ #include #include +#include #include #include "tegra30.dtsi" @@ -73,6 +74,91 @@ }; host1x@50000000 { + vi@54080000 { + status = "okay"; + + csi@800 { + status = "okay"; + + avdd-dsi-csi-supply = <&avdd_dsi_csi>; + + /* CSI-A */ + channel@0 { + reg = <0>; + + nvidia,mipi-calibrate = <&csi 0>; /* CSIA pad */ + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csia_input: endpoint { + data-lanes = <1 2>; + /* Add rear camera */ + }; + }; + + port@1 { + reg = <1>; + + csia_output: endpoint { + remote-endpoint = <&vi_ppa_input>; + }; + }; + }; + + /* CSI-B */ + channel@1 { + reg = <1>; + + nvidia,mipi-calibrate = <&csi 1>; /* CSIB pad */ + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csib_input: endpoint { + data-lanes = <3>; + remote-endpoint = <&front_camera_output>; + }; + }; + + port@1 { + reg = <1>; + + csib_output: endpoint { + remote-endpoint = <&vi_ppb_input>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vi_ppa_input: endpoint { + remote-endpoint = <&csia_output>; + }; + }; + + port@1 { + reg = <1>; + + vi_ppb_input: endpoint { + remote-endpoint = <&csib_output>; + }; + }; + }; + }; + hdmi: hdmi@54280000 { status = "okay"; @@ -80,8 +166,11 @@ pll-supply = <&vdd_1v8_vio>; vdd-supply = <&vdd_3v3_sys>; - nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; - nvidia,ddc-i2c-bus = <&hdmi_ddc>; + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; }; }; @@ -1160,6 +1249,36 @@ vdd-supply = <&vdd_3v3_sys>; }; + /* Aptina 1/6" HD SOC (MI1040) */ + front-camera@48 { + compatible = "aptina,mi1040"; + reg = <0x48>; + + clocks = <&tegra_car TEGRA30_CLK_CSUS>; + + reset-gpios = <&gpio TEGRA_GPIO(O, 0) GPIO_ACTIVE_LOW>; + + vddio-supply = <&vdd_1v8_cam>; + vdd-supply = <&vdd_1v8_cam>; + vaa-supply = <&avdd_2v85_fcam>; + + orientation = <0>; /* Front camera */ + + assigned-clocks = <&tegra_car TEGRA30_CLK_VI_SENSOR>, + <&tegra_car TEGRA30_CLK_CSUS>; + assigned-clock-rates = <24000000>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>, + <&tegra_car TEGRA30_CLK_VI_SENSOR>; + + port { + front_camera_output: endpoint { + bus-type = ; + link-frequencies = /bits/ 64 <384000000>; + remote-endpoint = <&csib_input>; + }; + }; + }; + gyroscope@68 { compatible = "invensense,mpu3050"; reg = <0x68>; @@ -1297,7 +1416,7 @@ /* LDO5 is not used by Transformers */ - ldo6 { + avdd_dsi_csi: ldo6 { regulator-name = "avdd_dsi_csi,pwrdet_mipi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -1572,6 +1691,20 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "d"; + + hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + ddc-i2c-bus = <&hdmi_ddc>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + vdd_5v0_bat: regulator-bat { compatible = "regulator-fixed"; regulator-name = "vdd_ac_bat"; @@ -1672,6 +1805,26 @@ vin-supply = <&vdd_5v0_sys>; }; + vdd_1v8_cam: regulator-viocam { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8_cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8_vio>; + }; + + avdd_2v85_fcam: regulator-avcam-front { + compatible = "regulator-fixed"; + regulator-name = "vdd_2v85_fcam"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + sound { nvidia,i2s-controller = <&tegra_i2s1>; diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts index cc14e6d..6b30e17 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts +++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts @@ -12,6 +12,18 @@ mmc2 = &sdmmc1; /* WiFi */ }; + host1x@50000000 { + vi@54080000 { + csi@800 { + /delete-node/ channel@1; + }; + + ports { + /delete-node/ port@1; + }; + }; + }; + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -116,6 +128,22 @@ }; }; + i2c@7000c500 { + camera-pmic@7d { + vt_1v2_front: ldo1 { + regulator-name = "vt_1v2_dig"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vt_2v7_front: ldo2 { + regulator-name = "vt_2v7_vana"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + }; + }; + spi@7000dc00 { dsi@2 { /* @@ -509,4 +537,17 @@ nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; }; + + thermal-zones { + cpu-thermal { + trips { + cpu-alert { + /* throttle at 60C until temperature drops to 59.8C */ + temperature = <60000>; + hysteresis = <200>; + type = "passive"; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts index 414117f..8966395 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts +++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts @@ -118,6 +118,52 @@ }; }; + i2c@7000c500 { + /* Aptina 1/6" HD SOC (MT9M114) */ + front-camera@48 { + compatible = "onnn,mt9m114"; + reg = <0x48>; + + clocks = <&tegra_car TEGRA30_CLK_CSUS>; + + reset-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>; + + vddio-supply = <&vio_1v8_front>; + vdd-supply = <&vt_1v8_front>; + vaa-supply = <&vt_2v8_front>; + + orientation = <0>; /* Front camera */ + + assigned-clocks = <&tegra_car TEGRA30_CLK_VI_SENSOR>, + <&tegra_car TEGRA30_CLK_CSUS>; + assigned-clock-rates = <24000000>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>, + <&tegra_car TEGRA30_CLK_VI_SENSOR>; + + port { + front_camera_output: endpoint { + bus-type = ; + link-frequencies = /bits/ 64 <384000000>; + remote-endpoint = <&csib_input>; + }; + }; + }; + + camera-pmic@7d { + vt_1v8_front: ldo1 { + regulator-name = "vt_1v8_dig"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vt_2v8_front: ldo2 { + regulator-name = "vt_2v8_vana"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; + spi@7000dc00 { dsi@2 { /* diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi b/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi index 768e201..60e8a19 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi @@ -3,6 +3,7 @@ #include #include #include +#include #include #include @@ -74,6 +75,91 @@ }; host1x@50000000 { + vi@54080000 { + status = "okay"; + + csi@800 { + status = "okay"; + + avdd-dsi-csi-supply = <&avdd_dsi_csi>; + + /* CSI-A */ + channel@0 { + reg = <0>; + + nvidia,mipi-calibrate = <&csi 0>; /* CSIA pad */ + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csia_input: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&rear_camera_output>; + }; + }; + + port@1 { + reg = <1>; + + csia_output: endpoint { + remote-endpoint = <&vi_ppa_input>; + }; + }; + }; + + /* CSI-B */ + channel@1 { + reg = <1>; + + nvidia,mipi-calibrate = <&csi 1>; /* CSIB pad */ + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csib_input: endpoint { + data-lanes = <3>; + remote-endpoint = <&front_camera_output>; + }; + }; + + port@1 { + reg = <1>; + + csib_output: endpoint { + remote-endpoint = <&vi_ppb_input>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vi_ppa_input: endpoint { + remote-endpoint = <&csia_output>; + }; + }; + + port@1 { + reg = <1>; + + vi_ppb_input: endpoint { + remote-endpoint = <&csib_output>; + }; + }; + }; + }; + lcd: dc@54200000 { rgb { status = "okay"; @@ -1112,29 +1198,68 @@ compatible = "dongwoon,dw9714"; reg = <0x0c>; - enable-gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; vcc-supply = <&vcc_focuser>; }; + /* SONY IMX111 1/4" BSI */ + rear-camera@10 { + compatible = "sony,imx111"; + reg = <0x10>; + + clocks = <&tegra_car TEGRA30_CLK_CSUS>; + + reset-gpios = <&gpio TEGRA_GPIO(K, 4) GPIO_ACTIVE_LOW>; + + iovdd-supply = <&vio_1v8_rear>; + dvdd-supply = <&vdd_1v2_rear>; + avdd-supply = <&vdd_2v7_rear>; + + orientation = <1>; /* Rear camera */ + rotation = <90>; + + nvmem = <&m24c08>; + lens-focus = <&dw9714>; + + assigned-clocks = <&tegra_car TEGRA30_CLK_VI_SENSOR>, + <&tegra_car TEGRA30_CLK_CSUS>; + assigned-clock-rates = <24000000>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>, + <&tegra_car TEGRA30_CLK_VI_SENSOR>; + + port { + rear_camera_output: endpoint { + data-lanes = <1 2>; + bus-type = ; + link-frequencies = /bits/ 64 <542400000>; + remote-endpoint = <&csia_input>; + }; + }; + }; + + /* rear camera sensor eeprom m24c08 from ST */ + m24c08: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + + /* if high then WP is on, if low then off */ + wp-gpios = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; + + /* it is not OTP but writing is unwanted */ + read-only; + pagesize = <16>; + num-addresses = <1>; + + vcc-supply = <&vio_1v8_rear>; + }; + camera-pmic@7d { compatible = "ti,lp8720"; reg = <0x7d>; enable-gpios = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>; - vt_1v2_front: ldo1 { - regulator-name = "vt_1v2_dig"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vt_2v7_front: ldo2 { - regulator-name = "vt_2v7_vana"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - vdd_2v7_rear: ldo3 { regulator-name = "8m_2v7_vana"; regulator-min-microvolt = <2700000>; @@ -1172,7 +1297,8 @@ pmic: max77663@1c { compatible = "maxim,max77663"; - reg = <0x1c>; + reg = <0x1c>, <0x48>; + reg-names = "pmic", "rtc"; interrupts = ; #interrupt-cells = <2>; @@ -1348,10 +1474,11 @@ maxim,active-fps-source = ; }; - ldo8 { + avdd_dsi_csi: ldo8 { regulator-name = "avdd_dsi_csi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-boot-on; maxim,active-fps-source = ; }; diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile index 856c9f2..1a2539f 100644 --- a/arch/arm/boot/dts/nxp/imx/Makefile +++ b/arch/arm/boot/dts/nxp/imx/Makefile @@ -376,6 +376,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ imx6ul-var-som-concerto.dtb \ + imx6ul-var-som-concerto-full.dtb \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-aster.dtb \ imx6ull-colibri-emmc-aster.dtb \ @@ -414,6 +415,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-tqma6ull2-mba6ulx.dtb \ imx6ull-tqma6ull2l-mba6ulx.dtb \ imx6ull-uti260b.dtb \ + imx6ull-var-som-concerto.dtb \ + imx6ull-var-som-concerto-full.dtb \ imx6ulz-14x14-evk.dtb \ imx6ulz-bsh-smm-m2.dtb dtb-$(CONFIG_SOC_IMX7D) += \ diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi index 94dbcef..160533b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi @@ -618,7 +618,6 @@ compatible = "fsl,imx25-nand"; reg = <0xbb000000 0x2000>; clocks = <&clks 50>; - clock-names = ""; interrupts = <33>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi index ab7b646..314c4f4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx35.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi @@ -369,7 +369,6 @@ compatible = "fsl,imx35-nand", "fsl,imx25-nand"; reg = <0xbb000000 0x2000>; clocks = <&clks 29>; - clock-names = ""; interrupts = <33>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts index b17264e..a02e9cd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts @@ -126,6 +126,7 @@ dvi-encoder { compatible = "ti,tfp410"; + ti,deskew = <0>; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts index 5118a68..3610ce3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts @@ -155,7 +155,7 @@ reg = <0x10000 0x3d>; reg-io-width = <2>; - wdt { + watchdog { compatible = "technologic,ts4800-wdt"; syscon = <&syscon 0xe>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts index 0814f56..02be8b6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts @@ -60,6 +60,7 @@ dvi-converter { compatible = "ti,tfp410"; + ti,deskew = <0>; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts index 6210673..aa1c7e5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts @@ -84,6 +84,7 @@ pinctrl-0 = <&pinctrl_display_gpio>; pinctrl-names = "default"; enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; + power-supply = <®_3p2v>; port { panel_in: endpoint { @@ -98,6 +99,13 @@ gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usbh1_vbus: regulator-usbh1-vbus { compatible = "regulator-fixed"; regulator-name = "vbus"; @@ -240,7 +248,7 @@ status = "okay"; touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_edt_ft5x06>; @@ -259,6 +267,7 @@ dac@60 { compatible = "microchip,mcp4725"; reg = <0x60>; + vdd-supply = <®_3v3>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts index e45a97d..f0fb88c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts @@ -258,6 +258,7 @@ clock-names = "main_clk"; clock-frequency = <24000000>; clocks = <&clks IMX5_CLK_CKO2>; + #phy-cells = <0>; assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; assigned-clock-parents = <&clks IMX5_CLK_OSC>; }; @@ -270,6 +271,7 @@ clock-frequency = <24000000>; clocks = <&clks IMX5_CLK_CKO2>; + #phy-cells = <0>; assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; assigned-clock-parents = <&clks IMX5_CLK_OSC>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi index 1869ad8..d3b27dc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi @@ -91,6 +91,8 @@ pinctrl-0 = <&pinctrl_display_power>; backlight = <&backlight_parallel>; enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + dvdd-supply = <®_3p2v>; + avdd-supply = <®_5v>; port { panel_in: endpoint { @@ -107,6 +109,14 @@ regulator-always-on; }; + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + reg_usb_vbus: regulator-usb-vbus { compatible = "regulator-fixed"; regulator-name = "usb_vbus"; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi index e395004..34cb0c3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi @@ -10,6 +10,7 @@ / { panel: panel-rgb { compatible = "powertip,ph800480t013-idf02"; + power-supply = <®_5v>; port { panel_rgb_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts index 1a00d29..ebec884 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts @@ -29,6 +29,13 @@ reg = <0x70000000 0x20000000>; }; + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + reg_usb1_vbus: regulator-usb-vbus { compatible = "regulator-fixed"; regulator-name = "usb_vbus"; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts index a1e19f9..8c02731 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts @@ -5,6 +5,7 @@ /dts-v1/; #include +#include #include "imx53.dtsi" / { @@ -314,6 +315,7 @@ port { ov5642_to_ipu_csi0: endpoint { remote-endpoint = <&ipu_csi0_from_parallel_sensor>; + bus-type = ; bus-width = <8>; hsync-active = <1>; vsync-active = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts index 872cf7e..6a1063c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts @@ -201,7 +201,7 @@ }; polytouch: edt-ft5x06@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_edt_ft5x06_1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts index 9ea23dd..62b05fe 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts @@ -32,12 +32,10 @@ }; &ipu1_csi1_from_ipu1_csi1_mux { - bus-width = <8>; }; &ipu1_csi1_mux_from_parallel_sensor { remote-endpoint = <&adv7180_to_ipu1_csi1_mux>; - bus-width = <8>; }; &ipu1_csi1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts index 182e819..c178751 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts @@ -32,12 +32,10 @@ }; &ipu1_csi1_from_ipu1_csi1_mux { - bus-width = <8>; }; &ipu1_csi1_mux_from_parallel_sensor { remote-endpoint = <&adv7180_to_ipu1_csi1_mux>; - bus-width = <8>; }; &ipu1_csi1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts index a106c4e..934b032 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts @@ -32,12 +32,10 @@ }; &ipu1_csi1_from_ipu1_csi1_mux { - bus-width = <8>; }; &ipu1_csi1_mux_from_parallel_sensor { remote-endpoint = <&adv7180_to_ipu1_csi1_mux>; - bus-width = <8>; }; &ipu1_csi1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi index 4e448b4..21e8bbd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi @@ -208,7 +208,7 @@ #address-cells = <1>; #size-cells = <0>; ethernet_phy0: ethernet-phy@0 { - compatible = "marvell,88E1510"; + compatible = "ethernet-phy-ieee802.3-c22"; device_type = "ethernet-phy"; /* Set LED0 control: */ /* On - Link, Blink - Activity, Off - No Link */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts index 6e1c493..31996dd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts @@ -32,12 +32,10 @@ }; &ipu2_csi1_from_ipu2_csi1_mux { - bus-width = <8>; }; &ipu2_csi1_mux_from_parallel_sensor { remote-endpoint = <&adv7180_to_ipu2_csi1_mux>; - bus-width = <8>; }; &ipu2_csi1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts index f13df8e..f224273 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts @@ -32,12 +32,10 @@ }; &ipu2_csi1_from_ipu2_csi1_mux { - bus-width = <8>; }; &ipu2_csi1_mux_from_parallel_sensor { remote-endpoint = <&adv7180_to_ipu2_csi1_mux>; - bus-width = <8>; }; &ipu2_csi1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts index d5d4690..804ee04 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts @@ -90,12 +90,10 @@ }; &ipu1_csi0_from_ipu1_csi0_mux { - bus-width = <16>; }; &ipu1_csi0_mux_from_parallel_sensor { remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>; - bus-width = <16>; }; &ipu1_csi0 { @@ -104,12 +102,10 @@ }; &ipu2_csi1_from_ipu2_csi1_mux { - bus-width = <8>; }; &ipu2_csi1_mux_from_parallel_sensor { remote-endpoint = <&adv7180_to_ipu2_csi1_mux>; - bus-width = <8>; }; &ipu2_csi1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts index 24fc3ff..cd9a050 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts @@ -109,6 +109,7 @@ panel: panel { compatible = "innolux,n133hse-ea1"; backlight = <&backlight>; + power-supply = <®_lvds_lcd>; }; reg_2p5v: regulator-2p5v { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts index c78f101..c69052d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts @@ -61,6 +61,7 @@ encoder { compatible = "ti,tfp410"; + ti,deskew = <0>; ports { #address-cells = <1>; @@ -323,19 +324,10 @@ remote-endpoint = <¶llel_display_in>; }; -&pcie { - pcie@0,0 { - reg = <0x000000 0 0 0 0>; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0xff>; - ranges; - - /* non-removable i211 ethernet card */ - eth1: ethernet@0,0 { - reg = <0x010000 0 0 0 0>; - }; +&pcie_port0 { + /* non-removable i211 ethernet card */ + eth1: ethernet@0,0 { + reg = <0x010000 0 0 0 0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts index 0225a62..ccf6a04 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts @@ -169,7 +169,7 @@ status = "okay"; touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi index beff5a0..fb18b87 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi @@ -384,12 +384,10 @@ }; &ipu1_csi0_from_ipu1_csi0_mux { - bus-width = <8>; }; &ipu1_csi0_mux_from_parallel_sensor { remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; - bus-width = <8>; }; &ipu1_csi0 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi index 6136a95..55647c1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi @@ -440,12 +440,10 @@ }; &ipu1_csi0_from_ipu1_csi0_mux { - bus-width = <16>; }; &ipu1_csi0_mux_from_parallel_sensor { remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>; - bus-width = <16>; }; &ipu1_csi0 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi index 552114a..bdbcad5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi @@ -397,12 +397,10 @@ }; &ipu1_csi0_from_ipu1_csi0_mux { - bus-width = <8>; }; &ipu1_csi0_mux_from_parallel_sensor { remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; - bus-width = <8>; }; &ipu1_csi0 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi index 610b2a7..cebfd62 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi @@ -256,7 +256,7 @@ }; touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi index ef0c266..f8a7218 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi @@ -405,7 +405,7 @@ }; touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi index 03fe053..fb1c923 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi @@ -326,7 +326,7 @@ }; touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi index 6a353a9..9fe52e0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi @@ -333,7 +333,7 @@ }; touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi index c39a9eb..ca4cb98 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi @@ -217,7 +217,7 @@ status = "okay"; touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; interrupt-parent = <&gpio5>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi index b9dde0a..40d8887 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi @@ -245,12 +245,10 @@ }; &ipu1_csi0_from_ipu1_csi0_mux { - bus-width = <8>; }; &ipu1_csi0_mux_from_parallel_sensor { remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; - bus-width = <8>; }; &ipu1_csi0 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi index ba29720..fe9046c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi @@ -754,11 +754,16 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie>; status = "okay"; }; +&pcie_port0 { + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi index 57297d6..fe25934 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi @@ -148,8 +148,7 @@ }; sound { - compatible = "karo,imx6qdl-tx6-sgtl5000", - "simple-audio-card"; + compatible = "simple-audio-card"; simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -293,7 +292,7 @@ }; polytouch: edt-ft5x06@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_edt_ft5x06>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi index 4dc2c41..9438862 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi @@ -302,6 +302,17 @@ <&clks IMX6QDL_CLK_PCIE_REF_125M>; clock-names = "pcie", "pcie_bus", "pcie_phy"; status = "disabled"; + + pcie_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; aips1: bus@2000000 { /* AIPS1 */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts index c5b220a..6b12cab 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts @@ -45,10 +45,15 @@ }; &pcie { + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>; status = "okay"; }; +&pcie_port0 { + reset-gpios = <&max7310_c 5 GPIO_ACTIVE_LOW>; +}; + &sata { status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi index 3e238d8..338de4d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi @@ -282,11 +282,16 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie_gpio>; status = "okay"; }; +&pcie_port0 { + reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; +}; + &lcdif1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index aefae5a..5484c39 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -1470,6 +1470,17 @@ power-domains = <&pd_disp>, <&pd_pci>; power-domain-names = "pcie", "pcie_phy"; status = "disabled"; + + pcie_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi index 3d147b1..32afe41 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi @@ -217,6 +217,7 @@ port { ov5640_to_parallel: endpoint { remote-endpoint = <¶llel_from_ov5640>; + bus-type = ; bus-width = <8>; data-shift = <2>; /* lines 9:2 are used */ hsync-active = <0>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts index bf7dbb4..e99ba04 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts @@ -62,7 +62,7 @@ status = "okay"; polytouch: touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <29 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts index 6cfc943..f79090f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts @@ -65,7 +65,7 @@ status = "okay"; polytouch: touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <29 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi index 1992dfb..192c6a9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi @@ -317,7 +317,7 @@ }; polytouch: polytouch@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_edt_ft5x06>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-audio.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-audio.dtsi new file mode 100644 index 0000000..3c480bc --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-audio.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Audio support for Variscite VAR-SOM-6UL module. + * + * Copyright 2019-2024 Variscite Ltd. + * Copyright 2026 Dimonoff + */ + +&iomuxc { + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi new file mode 100644 index 0000000..5600eea --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for the common parts shared by all the different CPU options on + * Variscite VAR-SOM-6UL Module + * + * Copyright 2019 Variscite Ltd. + * Copyright 2025 Bootlin + */ + +#include +#include + +/ { + model = "Variscite VAR-SOM-6UL module"; + compatible = "variscite,var-som-imx6ul", "fsl,imx6ul"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_gpio_dvfs: reg-gpio-dvfs { + compatible = "regulator-gpio"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1400000>; + regulator-name = "gpio_dvfs"; + regulator-type = "voltage"; + gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + states = <1300000 0x1 + 1400000 0x0>; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; +}; + +&pxp { + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xfff>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-common.dtsi new file mode 100644 index 0000000..e563731 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-common.dtsi @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for Variscite Concerto Carrier board with the VAR-SOM-6UL + * Variscite SoM mounted on it (all CPU variants) + * + * Copyright 2019 Variscite Ltd. + * Copyright 2025 Bootlin + */ + +#include + +/ { + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_key_back>, <&pinctrl_gpio_key_wakeup>; + + key-back { + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-wakeup { + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = ; + label = "gpled2"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + lvds_panel: lvds-panel { + compatible = "sgd,gktw70sdae4se", "panel-lvds"; + data-mapping = "jeida-18"; + width-mm = <153>; + height-mm = <86>; + + panel-timing { + clock-frequency = <35000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <40>; + vback-porch = <29>; + vfront-porch = <13>; + hsync-len = <48>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + rtc@68 { + /* + * To actually use this interrupt + * connect pins J14.8 & J14.10 on the Concerto-Board. + */ + compatible = "dallas,ds1337"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iomuxc { + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_gpio_key_back: gpio-key-backgrp { + fsl,pins = < + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x17059 + >; + }; + + pinctrl_gpio_key_wakeup: gpio-keys-wakeupgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x17059 + >; + }; + + pinctrl_gpio_leds: gpio-ledsgrp { + fsl,pins = < + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x1b0b0 /* GPLED2 */ + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x1b0b0 /* RTC alarm IRQ */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x78b0 + >; + }; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&tsc { + /* + * Conflics with wdog1 ext-reset-output & SD CD pins, + * so we keep it disabled by default. + */ + status = "disabled"; +}; + +/* Console UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* ttymxc4 UART */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + /* + * To actually use ext-reset-output + * connect pins J17.3 & J17.8 on the Concerto-Board + */ + fsl,ext-reset-output; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-full.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-full.dts new file mode 100644 index 0000000..725f34d --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-full.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-6UL + * Variscite SoM mounted on it (6UL CPU variant). + * + * Copyright 2026 Dimonoff + */ + +/dts-v1/; + +#include "imx6ul-var-som.dtsi" +#include "imx6ul-var-som-concerto-common.dtsi" +#include "imx6ul-var-som-wifi.dtsi" +#include "imx6ul-var-som-enet2.dtsi" +#include "imx6ul-var-som-enet1.dtsi" +#include "imx6ul-var-som-audio.dtsi" +#include "imx6ul-var-som-lvds-panel.dtsi" + +/ { + model = "Variscite VAR-SOM-6UL Concerto Board (6UL CPU)"; + compatible = "variscite,mx6ulconcerto", "variscite,var-som-imx6ul", "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts index 9ff3b37..c249e15 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts @@ -1,320 +1,22 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-MX6UL - * Variscite SoM mounted on it + * Support for Variscite Concerto Carrier board with the VAR-SOM-6UL + * Variscite SoM mounted on it (6UL CPU variant) * * Copyright 2019 Variscite Ltd. * Copyright 2025 Bootlin */ +/dts-v1/; + #include "imx6ul-var-som.dtsi" -#include +#include "imx6ul-var-som-concerto-common.dtsi" +#include "imx6ul-var-som-sd.dtsi" +#include "imx6ul-var-som-enet2.dtsi" +#include "imx6ul-var-som-audio.dtsi" +#include "imx6ul-var-som-lvds-panel.dtsi" / { - model = "Variscite VAR-SOM-MX6UL Concerto Board"; + model = "Variscite VAR-SOM-6UL Concerto Board (6UL CPU)"; compatible = "variscite,mx6ulconcerto", "variscite,var-som-imx6ul", "fsl,imx6ul"; - - chosen { - stdout-path = &uart1; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_key_back>, <&pinctrl_gpio_key_wakeup>; - - key-back { - gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - key-wakeup { - gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; - linux,code = ; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_leds>; - - led-0 { - function = LED_FUNCTION_STATUS; - color = ; - label = "gpled2"; - gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; -}; - -&fec1 { - status = "disabled"; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_gpio>, <&pinctrl_enet2_mdio>; - phy-mode = "rmii"; - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@3 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <3>; - clocks = <&rmii_ref_clk>; - clock-names = "rmii-ref"; - reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; - reset-assert-us = <100000>; - micrel,led-mode = <0>; - micrel,rmii-reference-clock-select-25-mhz = <1>; - }; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - rtc@68 { - /* - * To actually use this interrupt - * connect pins J14.8 & J14.10 on the Concerto-Board. - */ - compatible = "dallas,ds1337"; - reg = <0x68>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rtc>; - interrupt-parent = <&gpio1>; - interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - }; -}; - -&iomuxc { - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 - >; - }; - - pinctrl_enet2_gpio: enet2-gpiogrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* fec2 reset */ - >; - }; - - pinctrl_enet2_mdio: enet2-mdiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 - MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 - >; - }; - - pinctrl_gpio_key_back: gpio-key-backgrp { - fsl,pins = < - MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x17059 - >; - }; - - pinctrl_gpio_leds: gpio-ledsgrp { - fsl,pins = < - MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x1b0b0 /* GPLED2 */ - >; - }; - - pinctrl_gpio_key_wakeup: gpio-keys-wakeupgrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x17059 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 - >; - }; - - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 - >; - }; - - pinctrl_rtc: rtcgrp { - fsl,pins = < - MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x1b0b0 /* RTC alarm IRQ */ - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x1b0b1 - MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x1b0b1 - MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 - MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 - >; - }; - - pinctrl_usb_otg1_id: usbotg1idgrp { - fsl,pins = < - MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x17059 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 - >; - }; - - pinctrl_usdhc1_gpio: usdhc1-gpiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x1b0b1 /* CD */ - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x78b0 - >; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&snvs_pwrkey { - status = "disabled"; -}; - -&snvs_rtc { - status = "disabled"; -}; - -&tsc { - /* - * Conflics with wdog1 ext-reset-output & SD CD pins, - * so we keep it disabled by default. - */ - status = "disabled"; -}; - -/* Console UART */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -/* ttymxc4 UART */ -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - uart-has-rtscts; - status = "okay"; -}; - -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1_id>; - dr_mode = "otg"; - disable-over-current; - srp-disable; - hnp-disable; - adp-disable; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; - cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - no-1-8-v; - keep-power-in-suspend; - wakeup-source; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - /* - * To actually use ext-reset-output - * connect pins J17.3 & J17.8 on the Concerto-Board - */ - fsl,ext-reset-output; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet1.dtsi new file mode 100644 index 0000000..6b1e343 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet1.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Ethernet ENET1 support for Variscite VAR-SOM-6UL module with + * the EC configuration option ((ethernet PHY assembled on SOM). + * + * Copyright 2019-2024 Variscite Ltd. + * Copyright 2026 Dimonoff + */ + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_gpio>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; +}; + +&mdio_enet2 { + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&rmii_ref_clk>; + clock-names = "rmii-ref"; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <100000>; + micrel,led-mode = <1>; + micrel,rmii-reference-clock-select-25-mhz; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet2.dtsi new file mode 100644 index 0000000..b29fcdc --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet2.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Ethernet ENET2 support for Variscite VAR-SOM-6UL module. + * + * Copyright 2019-2024 Variscite Ltd. + * Copyright 2026 Dimonoff + */ + +/ { + rmii_ref_clk: rmii-ref-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "rmii-ref"; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_gpio>, <&pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio_enet2: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&rmii_ref_clk>; + clock-names = "rmii-ref"; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <100000>; + micrel,led-mode = <1>; + micrel,rmii-reference-clock-select-25-mhz; + }; + + ethphy1: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + clocks = <&rmii_ref_clk>; + clock-names = "rmii-ref"; + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <100000>; + micrel,led-mode = <0>; + micrel,rmii-reference-clock-select-25-mhz; + }; + }; +}; + +&iomuxc { + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_enet2_gpio: enet2-gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* fec2 reset */ + >; + }; + + pinctrl_enet2_mdio: enet2-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-lvds-panel.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-lvds-panel.dtsi new file mode 100644 index 0000000..996b37d --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-lvds-panel.dtsi @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * LVDS panel support for Variscite VAR-SOM-6UL module. + * + * Copyright 2019-2024 Variscite Ltd. + * Copyright 2026 Dimonoff + */ + +/ { + lcd_backlight: lcd-backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 2000000 0>; + pwm-names = "LCD_BKLT_PWM"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + lvds_encoder: lvds-encoder { + compatible = "ti,sn75lvds93", "lvds-encoder"; + power-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; + }; +}; + +&iomuxc { + pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + >; + }; + + pinctrl_lcdif_dat: lcdif-dat-grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_pwm4: pwm4-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 /* LCD BACKLIGHT */ + >; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + status = "okay"; + + port { + lcdif_out: endpoint { + remote-endpoint = <&lvds_enc_in>; + }; + }; +}; + +&lvds_panel { + status = "okay"; + + port { + lvds_panel_in: endpoint { + remote-endpoint = <&lvds_enc_out>; + }; + }; +}; + +/* PWM LCD */ +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi new file mode 100644 index 0000000..0e6d9b9 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support optional SD card interface on Variscite VAR-SOM-6UL module. + * + * Copyright 2019-2024 Variscite Ltd. + * Copyright 2026 Dimonoff + */ + +&iomuxc { + pinctrl_usdhc1_gpio: usdhc1-gpiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x1b0b1 /* CD */ + >; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi new file mode 100644 index 0000000..6d16ff7 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support optional Wifi/Bluetooth on Variscite VAR-SOM-6UL module. + * + * Copyright 2019-2024 Variscite Ltd. + * Copyright 2026 Dimonoff + */ + +/ { + reg_sd1_vmmc: regulator_sd1_vmmc { + compatible = "regulator-fixed"; + regulator-name = "VMMC1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <10000>; + }; + + usdhc1_pwrseq: usdhc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_wifi>; + reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + }; +}; + +&iomuxc { + pinctrl_32k_clk: 32kclkgrp { + /* + * For TP option, an additional oscillator is assembled on the + * SOM to provide 32 kHz to the WiFi module. Without TP option, + * this pin is configured to provide the 32 KHz clock to the + * WiFi module. + */ + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x03029 + >; + }; +}; + +&tsc { + status = "disabled"; +}; + +/* Bluetooth UART */ +&uart2 { + bluetooth { + compatible = "brcm,bcm43438-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_bt>; + shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + vbat-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; + }; +}; + +&usdhc1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_32k_clk>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_32k_clk>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_32k_clk>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc1_pwrseq>; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; /* LWB option: Sterling LWB5 */ + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi index 4e536e0..feea24c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Support for Variscite VAR-SOM-MX6UL Module + * Support for Variscite VAR-SOM-6UL Module * * Copyright 2019 Variscite Ltd. * Copyright 2025 Bootlin @@ -9,225 +9,30 @@ /dts-v1/; #include "imx6ul.dtsi" -#include -#include +#include "imx6ul-var-som-common.dtsi" / { - model = "Variscite VAR-SOM-MX6UL module"; + model = "Variscite VAR-SOM-6UL module"; compatible = "variscite,var-som-imx6ul", "fsl,imx6ul"; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x20000000>; - }; - - reg_gpio_dvfs: reg-gpio-dvfs { - compatible = "regulator-gpio"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1400000>; - regulator-name = "gpio_dvfs"; - regulator-type = "voltage"; - gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; - states = <1300000 0x1 - 1400000 0x0>; - }; - - rmii_ref_clk: rmii-ref-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - clock-output-names = "rmii-ref"; - }; -}; - -&clks { - assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; - assigned-clock-rates = <786432000>; -}; - -&cpu0 { - dc-supply = <®_gpio_dvfs>; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_gpio>, <&pinctrl_enet1_mdio>; - phy-mode = "rmii"; - phy-handle = <ðphy0>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - clocks = <&rmii_ref_clk>; - clock-names = "rmii-ref"; - reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - reset-assert-us = <100000>; - micrel,led-mode = <1>; - micrel,rmii-reference-clock-select-25-mhz = <1>; - }; - }; }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 - >; - }; - - pinctrl_enet1_gpio: enet1-gpiogrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* fec1 reset */ - >; - }; - - pinctrl_enet1_mdio: enet1-mdiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 - >; - }; - - pinctrl_hog: hoggrp { + pinctrl_brcm_bt: brcm-bt-grp { fsl,pins = < - MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* BT Enable */ - MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x03029 /* WLAN Enable */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* BT_REG_ON (BT_EN) */ >; }; - pinctrl_sai2: sai2grp { + pinctrl_brcm_wifi: brcm-wifi-grp { fsl,pins = < - MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 - MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 - MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 - MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 - MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* WL_PWR (WIFI_PWR 5G) */ + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* WL_REG_ON (WIFI_EN) */ >; }; - pinctrl_tsc: tscgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 - MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 - MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 - MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 - MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 - MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 - MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 - MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 - MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9 - MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9 - MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9 - MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + pinctrl_enet1_gpio: enet1-gpiogrp { fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 - MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 - MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 - MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 - MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* fec1 reset */ >; }; }; - -&pxp { - status = "okay"; -}; - -&sai2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai2>; - assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, - <&clks IMX6UL_CLK_SAI2>; - assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; - assigned-clock-rates = <0>, <12288000>; - fsl,sai-mclk-direction-output; - status = "okay"; -}; - -&snvs_poweroff { - status = "okay"; -}; - -&tsc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tsc>; - xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - measure-delay-time = <0xffff>; - pre-charge-time = <0xfff>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - uart-has-rtscts; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - bus-width = <8>; - no-1-8-v; - non-removable; - keep-power-in-suspend; - wakeup-source; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi index 24541fd..d2bfa08 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi @@ -951,6 +951,7 @@ interrupts = ; clocks = <&clks IMX6UL_CLK_ADC1>; clock-names = "adc"; + #io-channel-cells = <1>; fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; status = "disabled"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto-full.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto-full.dts new file mode 100644 index 0000000..1b7c1a3 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto-full.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-6UL + * Variscite SoM mounted on it (6ULL CPU variant). + * + * Copyright 2026 Dimonoff + */ + +/dts-v1/; + +#include "imx6ull-var-som.dtsi" +#include "imx6ul-var-som-concerto-common.dtsi" +#include "imx6ul-var-som-wifi.dtsi" +#include "imx6ul-var-som-enet2.dtsi" +#include "imx6ul-var-som-enet1.dtsi" +#include "imx6ul-var-som-audio.dtsi" +#include "imx6ul-var-som-lvds-panel.dtsi" + +/ { + model = "Variscite VAR-SOM-6UL Concerto Board (6ULL CPU)"; + compatible = "variscite,mx6ullconcerto", "variscite,var-som-imx6ull", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto.dts new file mode 100644 index 0000000..9c9d16e --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for Variscite Concerto Carrier board with the VAR-SOM-6UL + * Variscite SoM mounted on it (6ULL CPU variant) + * + * Copyright 2026 Dimonoff + */ + +/dts-v1/; + +#include "imx6ull-var-som.dtsi" +#include "imx6ul-var-som-concerto-common.dtsi" +#include "imx6ul-var-som-sd.dtsi" +#include "imx6ul-var-som-enet2.dtsi" +#include "imx6ul-var-som-audio.dtsi" +#include "imx6ul-var-som-lvds-panel.dtsi" + +/ { + model = "Variscite VAR-SOM-6UL Concerto Board (6ULL CPU)"; + compatible = "variscite,mx6ullconcerto", "variscite,var-som-imx6ull", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi new file mode 100644 index 0000000..f120b1d --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for Variscite VAR-SOM-6UL module with imx6ull CPU + * + * Copyright 2019-2024 Variscite Ltd. + * Copyright 2026 Dimonoff + */ + +#include "imx6ull.dtsi" +#include "imx6ul-var-som-common.dtsi" + +/ { + model = "Variscite VAR-SOM-6UL module"; + compatible = "variscite,var-som-imx6ull", "fsl,imx6ull"; +}; + +&iomuxc { + pinctrl_brcm_bt: brcm-bt-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* BT_REG_ON (BT_EN) */ + >; + }; + + pinctrl_brcm_wifi: brcm-wifi-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* WL_PWR (WIFI_PWR 5G) */ + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* WL_REG_ON (WIFI_EN) */ + >; + }; + + pinctrl_enet1_gpio: enet1-gpiogrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* fec1 reset */ + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi index f3d7a2d..e1f740e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi @@ -151,6 +151,16 @@ reg = <0x50>; pagesize = <32>; vcc-supply = <&vgen4_reg>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + module_info: module-info@20 { + reg = <0x20 0x60>; + }; + }; }; at24c02: eeprom@56 { diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts index 347dd0f..fca8aab 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts @@ -70,7 +70,7 @@ }; touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_touchscreen>; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts index 6222113..7a0e4dc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts @@ -19,6 +19,13 @@ }; }; + reg_1p5v: regulator-1p5v { + compatible = "regulator-fixed"; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -49,7 +56,7 @@ &i2c4 { polytouch: touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_touchscreen>; @@ -59,6 +66,33 @@ touchscreen-size-x = <800>; touchscreen-size-y = <480>; }; + + camera@3c { + compatible = "ovti,ov5645"; + reg = <0x3c>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_camera>; + + clocks = <&clks IMX7D_CLKO1_ROOT_DIV>; + assigned-clocks = <&clks IMX7D_CLKO1_ROOT_DIV>; + assigned-clock-rates = <24000000>; + + enable-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + + vdda-supply = <®_2p5v>; + vdddo-supply = <®_vref_1v8>; + vddd-supply = <®_1p5v>; + + port { + ov5645_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; }; &usdhc1 { @@ -93,5 +127,37 @@ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 >; }; +}; + +&iomuxc_lpsr { + pinctrl_camera: cameragrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x15 + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x15 + MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1 0x7d + >; + }; +}; + +&csi { + status = "okay"; +}; + +&mipi_csi { + status = "okay"; + + ports { + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5645_to_mipi_csi2>; + data-lanes = <1 2>; + }; + }; + }; +}; +&video_mux { + status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts index a370e86..0046b27 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts @@ -456,10 +456,15 @@ }; &pcie { + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>; status = "okay"; }; +&pcie_port0 { + reset-gpios = <&extended_io 1 GPIO_ACTIVE_LOW>; +}; + ®_1p0d { vin-supply = <&sw2_reg>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi index d961c61..3c5c1f2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi @@ -155,6 +155,17 @@ reset-names = "pciephy", "apps", "turnoff"; fsl,imx7d-pcie-phy = <&pcie_phy>; status = "disabled"; + + pcie_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi index 1355fed..39e37ae 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi @@ -325,6 +325,18 @@ clock-names = "divcore", "hsrun_divcore"; }; + wdog2: watchdog@40430000 { + compatible = "fsl,imx7ulp-wdt"; + reg = <0x40430000 0x10000>; + interrupts = ; + clocks = <&pcc2 IMX7ULP_CLK_WDG2>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG2>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; + timeout-sec = <40>; + status = "disabled"; + bootph-all; + }; + pcc3: clock-controller@40b30000 { compatible = "fsl,imx7ulp-pcc3"; reg = <0x40b30000 0x10000>; diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi index 2e19ebf..c3427dc 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi +++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi @@ -47,9 +47,117 @@ }; }; - ptm { - compatible = "arm,coresight-etm3x"; + replicator { + compatible = "arm,coresight-static-replicator"; + clocks = <&cpg_clocks R8A73A4_CLK_ZTR>; + clock-names = "atclk"; power-domains = <&pd_d4>; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + port@1 { + reg = <1>; + + replicator_out_port1: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + }; + + in-ports { + /* replicator input port */ + port { + replicator_in_port0: endpoint { + remote-endpoint = <&funnel_out_port>; + }; + }; + }; + }; + + etb@e6f81000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0xe6f81000 0 0x1000>; + clocks = <&cpg_clocks R8A73A4_CLK_ZT>, <&cpg_clocks R8A73A4_CLK_ZTR>; + clock-names = "apb_pclk", "atclk"; + power-domains = <&pd_d4>; + + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + }; + + tpiu@e6f83000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0xe6f83000 0 0x1000>; + clocks = <&cpg_clocks R8A73A4_CLK_ZT>, <&cpg_clocks R8A73A4_CLK_ZTR>; + clock-names = "apb_pclk", "atclk"; + power-domains = <&pd_d4>; + + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + }; + + funnel { + compatible = "arm,coresight-static-funnel"; + + /* funnel output ports */ + out-ports { + port { + funnel_out_port: endpoint { + remote-endpoint = + <&replicator_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + funnel0_in_port0: endpoint { + remote-endpoint = <&ptm0_out_port>; + }; + }; + }; + }; + + ptm@e6fbc000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe6fbc000 0 0x1000>; + clocks = <&cpg_clocks R8A73A4_CLK_ZT>, <&cpg_clocks R8A73A4_CLK_ZTR>; + clock-names = "apb_pclk", "atclk"; + cpu = <&cpu0>; + power-domains = <&pd_d4>; + + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel0_in_port0>; + }; + }; + }; }; timer { @@ -512,7 +620,7 @@ clock-output-names = "main", "pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b", "m1", "m2", - "zx", "zs", "hp"; + "zx", "zs", "hp", "ztr", "zt"; }; /* Variable factor clocks (DIV6) */ diff --git a/arch/arm/boot/dts/renesas/r8a7740.dtsi b/arch/arm/boot/dts/renesas/r8a7740.dtsi index d13ab86..c7056b9 100644 --- a/arch/arm/boot/dts/renesas/r8a7740.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7740.dtsi @@ -18,7 +18,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; @@ -59,9 +59,117 @@ interrupts = ; }; - ptm { - compatible = "arm,coresight-etm3x"; + replicator { + compatible = "arm,coresight-static-replicator"; + clocks = <&cpg_clocks R8A7740_CLK_ZTR>; + clock-names = "atclk"; power-domains = <&pd_d4>; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + port@1 { + reg = <1>; + + replicator_out_port1: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + }; + + in-ports { + /* replicator input port */ + port { + replicator_in_port0: endpoint { + remote-endpoint = <&funnel_out_port>; + }; + }; + }; + }; + + etb@e6fa1000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0xe6fa1000 0x1000>; + clocks = <&cpg_clocks R8A7740_CLK_ZT>, <&cpg_clocks R8A7740_CLK_ZTR>; + clock-names = "apb_pclk", "atclk"; + power-domains = <&pd_d4>; + + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + }; + + tpiu@e6fa3000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xe6fa3000 0x1000>; + clocks = <&cpg_clocks R8A7740_CLK_ZT>, <&cpg_clocks R8A7740_CLK_ZTR>; + clock-names = "apb_pclk", "atclk"; + power-domains = <&pd_d4>; + + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + }; + + funnel { + compatible = "arm,coresight-static-funnel"; + + /* funnel output ports */ + out-ports { + port { + funnel_out_port: endpoint { + remote-endpoint = + <&replicator_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + funnel0_in_port0: endpoint { + remote-endpoint = <&ptm0_out_port>; + }; + }; + }; + }; + + ptm@e6fbc000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0xe6fbc000 0x1000>; + clocks = <&cpg_clocks R8A7740_CLK_ZT>, <&cpg_clocks R8A7740_CLK_ZTR>; + clock-names = "apb_pclk", "atclk"; + cpu = <&cpu0>; + power-domains = <&pd_d4>; + + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel0_in_port0>; + }; + }; + }; }; ceu0: ceu@fe910000 { @@ -553,7 +661,7 @@ "usb24s", "i", "zg", "b", "m1", "hp", "hpp", "usbp", "s", "zb", "m3", - "cp"; + "cp", "ztr", "zt"; }; /* Variable factor clocks (DIV6) */ diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron-analog-audio.dtsi index 51208d1..25c7c06 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-analog-audio.dtsi @@ -14,8 +14,6 @@ rockchip,model = "VEYRON-I2S"; rockchip,i2s-controller = <&i2s>; rockchip,audio-codec = <&max98090>; - rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>; - rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>; rockchip,headset-codec = <&headsetcodec>; rockchip,hdmi-codec = <&hdmi>; }; diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi index 2d6cf08..ca8e8e7 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi @@ -18,6 +18,11 @@ stdout-path = "serial2:115200n8"; }; + firmware { + #address-cells = <1>; + #size-cells = <1>; + }; + /* * The default coreboot on veyron devices ignores memory@0 nodes * and would instead create another memory node. diff --git a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts index 9902849..70d85af 100644 --- a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts +++ b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts @@ -97,6 +97,8 @@ interrupts = <12 IRQ_TYPE_LEVEL_LOW>; reg = <1>; realtek,clkout-disable; + realtek,rxc-ssc-enable; + realtek,sysclk-ssc-enable; reset-assert-us = <15000>; reset-deassert-us = <55000>; reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; @@ -146,6 +148,8 @@ interrupts = <15 IRQ_TYPE_LEVEL_LOW>; reg = <1>; realtek,clkout-disable; + realtek,rxc-ssc-enable; + realtek,sysclk-ssc-enable; reset-assert-us = <15000>; reset-deassert-us = <55000>; reset-gpios = <&gpiog 8 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts index 4d4cec8..6022e73 100644 --- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts @@ -64,6 +64,7 @@ compatible = "gpio-keys"; button-user { + /* GPIO on PA13 "User button 2 (B2)" */ label = "User-PA13"; linux,code = ; gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; @@ -74,6 +75,7 @@ compatible = "gpio-leds"; led_blue: led-blue { + /* GPIO on PA14 "User LED (LD3)" */ function = LED_FUNCTION_HEARTBEAT; color = ; gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; @@ -82,6 +84,7 @@ }; led-red { + /* GPIO on PA13 "User LED (LD4)" */ function = LED_FUNCTION_STATUS; color = ; gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; @@ -252,6 +255,7 @@ &i2c1 { pinctrl-names = "default", "sleep"; + /* SDA on PE8 = CN8.27, SCL on PD12 = CN8.28 */ pinctrl-0 = <&i2c1_pins_a>; pinctrl-1 = <&i2c1_sleep_pins_a>; i2c-scl-rising-time-ns = <96>; @@ -486,7 +490,10 @@ status = "okay"; }; pwm { - /* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 func */ + /* + * CH4 on PB1 = CN8.7; + * CH3 on PB0 = CN8.10 is possible (conflicting with usart1) + */ pinctrl-0 = <&pwm3_pins_a>; pinctrl-1 = <&pwm3_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -505,7 +512,10 @@ status = "okay"; }; pwm { - /* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 func */ + /* + * CH2 on PD13 = CN8.31; + * CH1 on PD12 = CN8.28 is possible (conflicting with &i2c1) + */ pinctrl-0 = <&pwm4_pins_a>; pinctrl-1 = <&pwm4_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -524,7 +534,12 @@ status = "okay"; }; pwm { - /* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 func */ + /* + * CH3 on PE5 = CN8.32 + * CH1N on PA7 = CN8.36 is possible (conflicting with &usart1) + * CH2N on PB0 = CN8.10 is possible (conflicting with &usart1) + * CH3N on PB1 = CN8.7 is possible (conflicting with &timers3) + */ pinctrl-0 = <&pwm8_pins_a>; pinctrl-1 = <&pwm8_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -541,7 +556,7 @@ status = "okay"; }; pwm { - /* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 func */ + /* CH1 on PF9 = CN8.33 (alternatively on PA7 = CN8.36 (conflicting with &usart1)) */ pinctrl-0 = <&pwm14_pins_a>; pinctrl-1 = <&pwm14_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -553,6 +568,7 @@ }; &uart4 { + /* Accessible via micro USB ST-LINK USB (CN10) */ pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&uart4_pins_a>; pinctrl-1 = <&uart4_sleep_pins_a>; @@ -564,6 +580,7 @@ &uart8 { pinctrl-names = "default", "sleep", "idle"; + /* TX on PE1 = CN8.37, RX on PF9 = CN8.33 */ pinctrl-0 = <&uart8_pins_a>; pinctrl-1 = <&uart8_sleep_pins_a>; pinctrl-2 = <&uart8_idle_pins_a>; @@ -574,6 +591,7 @@ &usart1 { pinctrl-names = "default", "sleep", "idle"; + /* TX on PC0 = CN8.8, RX on PB0 = CN8.10, RTS on PC2 = CN8.11, CTS on PA7 = CN8.36 */ pinctrl-0 = <&usart1_pins_a>; pinctrl-1 = <&usart1_sleep_pins_a>; pinctrl-2 = <&usart1_idle_pins_a>; @@ -584,6 +602,7 @@ /* Bluetooth */ &usart2 { pinctrl-names = "default", "sleep", "idle"; + /* TX on PH12, RX on PD15, RTS on PD4, CTS on PE11 */ pinctrl-0 = <&usart2_pins_a>; pinctrl-1 = <&usart2_sleep_pins_a>; pinctrl-2 = <&usart2_idle_pins_a>; @@ -613,6 +632,7 @@ }; &usbotg_hs { + /* USB Type-C DRP (CN7) */ phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; usb-role-switch; diff --git a/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts b/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts index a5ea143..862782d 100644 --- a/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts +++ b/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts @@ -36,6 +36,56 @@ }; }; +&adc1 { + channel@0 { + reg = <0>; + st,min-sample-time-ns = <20000>; + label = "ain_aux0"; + }; + + channel@1 { + reg = <1>; + st,min-sample-time-ns = <20000>; + label = "ain_aux1"; + }; + + channel@3 { + reg = <3>; + st,min-sample-time-ns = <20000>; + label = "hpdcm1_i2"; + }; + + channel@5 { + reg = <5>; + st,min-sample-time-ns = <20000>; + label = "pout1_i"; + }; + + channel@9 { + reg = <9>; + st,min-sample-time-ns = <20000>; + label = "pout0_i"; + }; + + channel@13 { + reg = <13>; + st,min-sample-time-ns = <200000>; + label = "phint1_ain"; + }; + + channel@15 { + reg = <15>; + st,min-sample-time-ns = <20000>; + label = "hpdcm0_i1"; + }; + + channel@18 { + reg = <18>; + st,min-sample-time-ns = <20000>; + label = "hpdcm0_i2"; + }; +}; + &clk_hse { clock-frequency = <25000000>; }; @@ -46,3 +96,81 @@ assigned-clock-rates = <125000000>; /* Clock PLL3 to 625Mhz in tf-a. */ st,eth-clk-sel; }; + +&gpio0 { + gpio-line-names = "HSIN0_BIAS", "HSIN1_BIAS", "HSIN2_BIAS", "HSIN3_BIAS", + "HSIN4_BIAS", "", "STP_VREF0_LVL", "HSIN_VREF0_LVL", + "STP0_FB_BIAS", "STP1_FB_BIAS", "STP2_FB_BIAS", "STP3_FB_BIAS", + "", "", "", ""; +}; + +&gpio1 { + gpio-line-names = "HSIN5_BIAS", "HSIN6_BIAS", "HSIN7_BIAS", "HSIN8_BIAS", + "HSIN9_BIAS", "", "STP_VREF1_LVL", "HSIN_VREF1_LVL", + "STP4_FB_BIAS", "STP5_FB_BIAS", "STP6_FB_BIAS", "", + "", "", "LSIN8_BIAS", "LSIN9_BIAS"; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "STP_RESETN", "STP_ENABLEN", "HPOUT0", "HPOUT0_ALERTN"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_d_mecsbc>; +}; + +&gpioe { + gpio-line-names = "HPOUT0_RESETN", "HPOUT1", "HPOUT1_ALERTN", "", + "", "", "HPOUT1_RESETN", + "LPOUT0", "LPOUT0_ALERTN", "LPOUT0_RESETN", + "LPOUT1", "LPOUT1_ALERTN", "LPOUT1_RESETN", + "LPOUT2", "LPOUT2_ALERTN", "LPOUT2_RESETN"; +}; + +&gpiof { + gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "LPOUT3_RESETN", + "LPOUT4", "LPOUT4_ALERTN", "LPOUT4_RESETN", + "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "LPOUT5", "LPOUT5_ALERTN", "", "LPOUT5_RESETN", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpioh { + gpio-line-names = "", "", "", "", + "", "", "", "", + "GPIO0_RESETN", "", "", "", + "", "", "", ""; +}; + +&gpioi { + gpio-line-names = "", "", "", "", + "", "", "", "", + "HPDCM0_SLEEPN", "HPDCM1_SLEEPN", "GPIO1_RESETN", "", + "", "", "", ""; +}; + +&gpioj { + gpio-line-names = "HSIN10", "HSIN11", "HSIN12", "HSIN13", + "HSIN14", "HSIN15", "", "", + "", "", "", "", + "", "RTD_RESETN", "", ""; +}; + +&gpiok { + gpio-line-names = "", "", "HSIN0", "HSIN1", + "HSIN2", "HSIN3", "HSIN4", "HSIN5"; +}; + +&gpioz { + gpio-line-names = "", "", "", "HSIN6", + "HSIN7", "HSIN8", "HSIN9", ""; +}; + diff --git a/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts b/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts index 16b814c..739cc18 100644 --- a/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts +++ b/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts @@ -36,10 +36,154 @@ }; }; +&adc1 { + channel@0 { + reg = <0>; + st,min-sample-time-ns = <20000>; + label = "p24v_hpdcm"; + }; + + channel@1 { + reg = <1>; + st,min-sample-time-ns = <20000>; + label = "p24v_stp"; + }; + + channel@3 { + reg = <3>; + st,min-sample-time-ns = <200000>; + label = "phint1_ain"; + }; + + channel@5 { + reg = <5>; + st,min-sample-time-ns = <20000>; + label = "hpout1_i"; + }; + + channel@9 { + reg = <9>; + st,min-sample-time-ns = <20000>; + label = "hpout0_i"; + }; + + channel@13 { + reg = <13>; + st,min-sample-time-ns = <20000>; + label = "hpdcm0_i2"; + }; + + channel@15 { + reg = <15>; + st,min-sample-time-ns = <20000>; + label = "hpdcm1_i2"; + }; + + channel@18 { + reg = <18>; + st,min-sample-time-ns = <20000>; + label = "hpdcm0_i1"; + }; +}; + &clk_hse { clock-frequency = <24000000>; }; +&gpio0 { + gpio-line-names = "HSIN0_BIAS", "HSIN1_BIAS", "HSIN2_BIAS", "HSIN3_BIAS", + "", "", "HSIN_VREF0_LVL", "HSIN_VREF1_LVL", + "HSIN4_BIAS", "HSIN5_BIAS", "HSIN6_BIAS", "HSIN7_BIAS", + "", "", "", ""; +}; + +&gpio1 { + gpio-line-names = "HSIN8_BIAS", "HSIN9_BIAS", "HSIN10_BIAS", "HSIN11_BIAS", + "", "", "HSIN_VREF2_LVL", "HSIN_VREF3_LVL", + "HSIN12_BIAS", "HSIN13_BIAS", "HSIN14_BIAS", "HSIN15_BIAS", + "", "", "LSIN8_BIAS", "LSIN9_BIAS"; +}; + +&gpioa { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "GPIO1_RESETN", "", + "", "", "", "LPOUT5"; +}; + +&gpiob { + gpio-line-names = "", "", "", "", + "LPOUT4_RESETN", "", "", "", + "", "LPOUT4_ALERTN", "", "", + "", "", "", ""; +}; + +&gpioc { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "LPOUT4", "", "", + "", "", "", ""; +}; + +&gpiod { + gpio-line-names = "LPOUT2", "", "LPOUT3_RESETN", "", + "LPOUT2_ALERTN", "", "MECIO_ADDR0", "", + "HPOUT1_ALERTN", "HPOUT1_RESETN", "", "", + "", "", "HPOUT0", "HPOUT1"; +}; + +&gpioe { + gpio-line-names = "LPOUT0_RESETN", "", "", "", + "", "LPOUT3", "LPOUT5_ALERTN", "", + "", "", "", "", + "", "", "", "HSIN_RESETN"; +}; + +&gpiof { + gpio-line-names = "LPOUT5_RESETN", "", "", "HPOUT0_ALERTN", + "", "LPOUT1", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "", "", "", "HPOUT0_RESETN", + "", "", "LPOUT3_ALERTN", "", + "", "", "GPIO0_RESETN", "", + "", "", "", "LPOUT2_RESETN"; +}; + +&gpioh { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "LPOUT0", "", "", + "", "LPOUT0_ALERTN", "STP_ENABLEN", "STP_RESETN"; +}; + +&gpioi { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "SPE_RESETN", "", + "HPDCM0_SLEEPN", "", "", ""; +}; + +&gpioj { + gpio-line-names = "", "", "", "", + "", "", "", "MECIO_ADDR1", + "", "", "", "", + "", "", "", "LPOUT1_RESETN"; +}; + +&gpiok { + gpio-line-names = "", "", "RTD_RESETN", "", + "", "LPOUT1_ALERTN", "", ""; +}; + +&gpioz { + gpio-line-names = "", "", "", "", + "HPDCM1_SLEEPN", "", "", ""; +}; + &m_can1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&m_can1_pins_b>; diff --git a/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi index 915ba25..1a4f5a5 100644 --- a/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi @@ -90,94 +90,45 @@ }; &adc { - /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */ + /* ANA0, ANA1 are dedicated pins and don't need pinctrl. */ pinctrl-0 = <&adc12_pins_mecsbc>; pinctrl-names = "default"; vdd-supply = <&v3v3>; vdda-supply = <&v3v3>; - vref-supply = <&v3v3>; + vref-supply = <&vrefbuf>; status = "okay"; }; &adc1 { status = "okay"; - channel@0 { - reg = <0>; - /* 16.5 ck_cycles sampling time */ - st,min-sample-time-ns = <5000>; - label = "p24v_stp"; - }; - - channel@1 { - reg = <1>; - st,min-sample-time-ns = <5000>; - label = "p24v_hpdcm"; - }; - channel@2 { reg = <2>; - st,min-sample-time-ns = <5000>; + st,min-sample-time-ns = <20000>; label = "ain0"; }; - channel@3 { - reg = <3>; - st,min-sample-time-ns = <5000>; - label = "hpdcm1_i2"; - }; - - channel@5 { - reg = <5>; - st,min-sample-time-ns = <5000>; - label = "hpout1_i"; - }; - channel@6 { reg = <6>; - st,min-sample-time-ns = <5000>; + st,min-sample-time-ns = <20000>; label = "ain1"; }; - channel@9 { - reg = <9>; - st,min-sample-time-ns = <5000>; - label = "hpout0_i"; - }; - channel@10 { reg = <10>; - st,min-sample-time-ns = <5000>; + st,min-sample-time-ns = <200000>; label = "phint0_ain"; }; - channel@13 { - reg = <13>; - st,min-sample-time-ns = <5000>; - label = "phint1_ain"; - }; - - channel@15 { - reg = <15>; - st,min-sample-time-ns = <5000>; - label = "hpdcm0_i1"; - }; - channel@16 { reg = <16>; - st,min-sample-time-ns = <5000>; + st,min-sample-time-ns = <20000>; label = "lsin"; }; - channel@18 { - reg = <18>; - st,min-sample-time-ns = <5000>; - label = "hpdcm0_i2"; - }; - channel@19 { reg = <19>; - st,min-sample-time-ns = <5000>; + st,min-sample-time-ns = <20000>; label = "hpdcm1_i1"; }; }; @@ -187,14 +138,13 @@ channel@2 { reg = <2>; - /* 16.5 ck_cycles sampling time */ - st,min-sample-time-ns = <5000>; + st,min-sample-time-ns = <20000>; label = "ain2"; }; channel@6 { reg = <6>; - st,min-sample-time-ns = <5000>; + st,min-sample-time-ns = <20000>; label = "ain3"; }; }; @@ -223,69 +173,6 @@ }; }; -&gpiod { - gpio-line-names = "", "", "", "", - "", "", "", "", - "", "", "", "", - "STP_RESETN", "STP_ENABLEN", "HPOUT0", "HPOUT0_ALERTN"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog_d_mecsbc>; -}; - -&gpioe { - gpio-line-names = "HPOUT0_RESETN", "HPOUT1", "HPOUT1_ALERTN", "", - "", "", "HPOUT1_RESETN", - "LPOUT0", "LPOUT0_ALERTN", "GPOUT0_RESETN", - "LPOUT1", "LPOUT1_ALERTN", "GPOUT1_RESETN", - "LPOUT2", "LPOUT2_ALERTN", "GPOUT2_RESETN"; -}; - -&gpiof { - gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "GPOUT3_RESETN", - "LPOUT4", "LPOUT4_ALERTN", "GPOUT4_RESETN", - "", "", - "", "", "", "", - "", "", "", ""; -}; - -&gpiog { - gpio-line-names = "LPOUT5", "LPOUT5_ALERTN", "", "LPOUT5_RESETN", - "", "", "", "", - "", "", "", "", - "", "", "", ""; -}; - -&gpioh { - gpio-line-names = "", "", "", "", - "", "", "", "", - "GPIO0_RESETN", "", "", "", - "", "", "", ""; -}; - -&gpioi { - gpio-line-names = "", "", "", "", - "", "", "", "", - "HPDCM0_SLEEPN", "HPDCM1_SLEEPN", "GPIO1_RESETN", "", - "", "", "", ""; -}; - -&gpioj { - gpio-line-names = "HSIN10", "HSIN11", "HSIN12", "HSIN13", - "HSIN14", "HSIN15", "", "", - "", "", "", "", - "", "RTD_RESETN", "", ""; -}; - -&gpiok { - gpio-line-names = "", "", "HSIN0", "HSIN1", - "HSIN2", "HSIN3", "HSIN4", "HSIN5"; -}; - -&gpioz { - gpio-line-names = "", "", "", "HSIN6", - "HSIN7", "HSIN8", "HSIN9", ""; -}; - &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -297,10 +184,6 @@ reg = <0x20>; gpio-controller; #gpio-cells = <2>; - gpio-line-names = "HSIN0_BIAS", "HSIN1_BIAS", "HSIN2_BIAS", "HSIN3_BIAS", - "", "", "HSIN_VREF0_LVL", "HSIN_VREF1_LVL", - "HSIN4_BIAS", "HSIN5_BIAS", "HSIN6_BIAS", "HSIN9_BIAS", - "", "", "", ""; }; gpio1: gpio@21 { @@ -308,10 +191,6 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; - gpio-line-names = "HSIN8_BIAS", "HSIN9_BIAS", "HSIN10_BIAS", "HSIN11_BIAS", - "", "", "HSIN_VREF2_LVL", "HSIN_VREF3_LVL", - "HSIN12_BIAS", "HSIN13_BIAS", "HSIN14_BIAS", "HSIN15_BIAS", - "", "", "LSIN8_BIAS", "LSIN9_BIAS"; }; }; @@ -412,6 +291,13 @@ phy-supply = <&v3v3>; }; +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&v3v3>; + status = "okay"; +}; + &pinctrl { adc12_pins_mecsbc: adc12-ain-mecsbc-0 { pins { diff --git a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts index 1dc4e34..c5259eb 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts @@ -558,8 +558,8 @@ remote-endpoint = <&codec_endpoint>; dai-format = "dsp_b"; - bitclock-master = <&codec_port>; - frame-master = <&codec_port>; + bitclock-master = <&codec_endpoint>; + frame-master = <&codec_endpoint>; bitclock-inversion; clocks = <&audio_mclk>; }; diff --git a/arch/arm/boot/dts/ti/omap/dm8168-evm.dts b/arch/arm/boot/dts/ti/omap/dm8168-evm.dts index 6130b9a..81450e1 100644 --- a/arch/arm/boot/dts/ti/omap/dm8168-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dm8168-evm.dts @@ -8,6 +8,10 @@ model = "DM8168 EVM"; compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816"; + chosen { + stdout-path = &uart3; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000 /* 1 GB */ diff --git a/arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi index ea02fd4..73e27b9 100644 --- a/arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi @@ -69,6 +69,8 @@ cpcap_audio: audio-codec { #sound-dai-cells = <1>; + interrupts-extended = <&cpcap 9 0>, <&cpcap 10 0>; + interrupt-names = "hs", "mb2"; port@0 { cpcap_audio_codec0: endpoint { @@ -267,6 +269,8 @@ regulator-min-microvolt = <2775000>; regulator-max-microvolt = <2775000>; regulator-enable-ramp-delay = <1000>; - regulator-initial-mode = <0x00>; /* NORMAL */ + regulator-allowed-modes = <0x00>, <0x40>; /* ON, LOW_PWR */ + regulator-initial-mode = <0x00>; /* ON */ + regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts index 673df1b..e253e07 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts @@ -351,7 +351,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mpu9150h_pins>; interrupt-parent = <&gpio2>; - interrupt = <19 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -413,7 +413,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mpu9150_pins>; interrupt-parent = <&gpio2>; - interrupt = <7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; vddio-supply = <&cb_v18>; vdd-supply = <&cb_v33>; invensense,level-shifter; diff --git a/arch/arm/boot/dts/zte/Makefile b/arch/arm/boot/dts/zte/Makefile new file mode 100644 index 0000000..f052cfb --- /dev/null +++ b/arch/arm/boot/dts/zte/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +dtb-$(CONFIG_SOC_ZX297520V3) += \ + zx297520v3-dlink-dwr932m.dtb diff --git a/arch/arm/boot/dts/zte/zx297520v3-dlink-dwr932m.dts b/arch/arm/boot/dts/zte/zx297520v3-dlink-dwr932m.dts new file mode 100644 index 0000000..1700f46 --- /dev/null +++ b/arch/arm/boot/dts/zte/zx297520v3-dlink-dwr932m.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2026 Stefan Dösinger + */ + +/dts-v1/; + +#include "zx297520v3.dtsi" + +/ { + model = "D-Link DWR-932M"; + compatible = "dlink,dwr932m", "zte,zx297520v3"; + + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x04000000>; + }; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/zte/zx297520v3.dtsi b/arch/arm/boot/dts/zte/zx297520v3.dtsi new file mode 100644 index 0000000..a16c30a --- /dev/null +++ b/arch/arm/boot/dts/zte/zx297520v3.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2026 Stefan Dösinger + */ + +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0>; + }; + }; + + /* Base bus clock and default for the UART. It will be replaced once a clock driver has + * been added. + */ + uartclk: uartclk-26000000 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <26000000>; + interrupt-parent = <&gic>; + /* I don't think uboot sets CNTVOFF and the stock kernel doesn't use the + * arm timer at all. Since this is a single CPU system I don't think it + * really matters that the offset is random though. + */ + arm,cpu-registers-not-fw-configured; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + /* The GIC has a non-standard way of configuring ints between level-low/level + * high or rising edge/falling edge at 0xf2202070 and onwards. See AP_INT_MODE_BASE + * and AP_PPI_MODE_REG in the ZTE kernel, although the offsets in the kernel source + * seem wrong. + * + * Everything defaults to active-high/rising edge, but the timer is active-low. We + * currently rely on the boot loader to change timer IRQs to active-low for us for + * now. + */ + gic: interrupt-controller@f2000000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf2000000 0x10000>, + <0xf2040000 0x20000>; + }; + + uart0: serial@131000 { + compatible = "arm,pl011", "arm,primecell"; + arm,primecell-periphid = <0x0018c011>; + reg = <0x00131000 0x1000>; + interrupts = ; + clocks = <&uartclk>, <&uartclk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart1: serial@1408000 { + compatible = "arm,pl011", "arm,primecell"; + arm,primecell-periphid = <0x0018c011>; + reg = <0x01408000 0x1000>; + interrupts = ; + clocks = <&uartclk>, <&uartclk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart2: serial@140d000 { + compatible = "arm,pl011", "arm,primecell"; + arm,primecell-periphid = <0x0018c011>; + reg = <0x0140d000 0x1000>; + interrupts = ; + clocks = <&uartclk>, <&uartclk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 72c812e..5c18e50 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -48,6 +48,12 @@ config ARCH_ARTPEC help This enables support for the ARMv8 based ARTPEC SoC Family. +config ARCH_ASPEED + bool "Aspeed SoC family" + help + This enables support for ASPEED's SoC family, such as the + ast27XX 8th generation Baseboard Management Controller (BMC). + config ARCH_AXIADO bool "Axiado SoC Family" select GPIOLIB diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 98ec8f1..fc726b2 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -9,6 +9,7 @@ subdir-y += amlogic subdir-y += apm subdir-y += apple subdir-y += arm +subdir-y += aspeed subdir-y += axiado subdir-y += bitmain subdir-y += blaize diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index d116864..53e6b70 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -1,4 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 +# Enables support for device-tree overlays for named devices +DTC_FLAGS_sun50i-a64-pine64-lts := -@ +DTC_FLAGS_sun50i-a64-pine64 := -@ +DTC_FLAGS_sun50i-a64-pine64-plus := -@ +DTC_FLAGS_sun50i-a64-sopine-baseboard := -@ + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index bf05486..1598e86 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -182,12 +182,38 @@ #size-cells = <1>; ranges; - sram_c: sram@28000 { + /* SRAM C */ + sram@28000 { compatible = "mmio-sram"; reg = <0x00028000 0x30000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00028000 0x30000>; + + /* + * 0x0 ~ 0x20000 is partial alias of VE SRAM below. + * 0x20000 ~ 0x2ffff is (partial?) alias of DE SRAM. + * However the whole region is toggled together. + */ + sram_c: sram-section@0 { + compatible = "allwinner,sun50i-h616-sram-c", + "allwinner,sun50i-a64-sram-c"; + reg = <0x00000 0x30000>; + }; + }; + + /* VE SRAM */ + sram@1a00000 { + compatible = "mmio-sram"; + reg = <0x01a00000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01a00000 0x200000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun50i-h616-ve-sram"; + reg = <0x000000 0x200000>; + }; }; }; @@ -237,6 +263,16 @@ clocks = <&osc24M>; }; + hstimer@3005000 { + compatible = "allwinner,sun50i-h616-hstimer", + "allwinner,sun20i-d1-hstimer"; + reg = <0x03005000 0x1000>; + interrupts = , + ; + clocks = <&ccu CLK_BUS_HSTIMER>; + resets = <&ccu RST_BUS_HSTIMER>; + }; + watchdog: watchdog@30090a0 { compatible = "allwinner,sun50i-h616-wdt", "allwinner,sun6i-a31-wdt"; diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi index 5afa8d9..ca6a168 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi @@ -101,7 +101,8 @@ interrupts = , , , - ; + , + ; }; soc { @@ -128,7 +129,8 @@ pio: pinctrl@2000000 { compatible = "allwinner,sun55i-a523-pinctrl"; reg = <0x2000000 0x800>; - interrupts = , + interrupts = , + , , , , @@ -340,6 +342,19 @@ status = "disabled"; }; + gpadc: adc@2009000 { + compatible = "allwinner,sun55i-a523-gpadc"; + reg = <0x2009000 0x400>; + clocks = <&ccu CLK_BUS_GPADC0>, <&ccu CLK_GPADC0>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_GPADC0>; + interrupts = ; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + wdt: watchdog@2050000 { compatible = "allwinner,sun55i-a523-wdt"; reg = <0x2050000 0x20>; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts index f4c9530..c41525a 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "amlogic-t7.dtsi" +#include +#include / { model = "Khadas VIM4"; @@ -13,6 +15,9 @@ aliases { serial0 = &uart_a; + mmc0 = &sd_emmc_c; + mmc1 = &sd_emmc_b; + mmc2 = &sd_emmc_a; }; memory@0 { @@ -40,13 +45,223 @@ }; }; + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + pwm-leds { + compatible = "pwm-leds"; + + status { + linux,default-trigger="heartbeat"; + max-brightness = <255>; + pwms = <&pwm_ao_cd 0 30040 0>; + }; + }; + + sd_3v3: regulator-sdcard-3v3 { + compatible = "regulator-fixed"; + regulator-name = "SD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOD_11 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <500>; + power-off-delay-us = <200000>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + vcc5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc5v0_usb: regulator-vcc-usb { + compatible = "regulator-fixed"; + regulator-name = "VCC5V0_USB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v>; + + gpio = <&gpio GPIOY_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddio_1v8: regulator-vddio-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddio_3v3>; + regulator-always-on; + }; + + vddio_3v3: regulator-vddio-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_c: regulator-gpio-c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddio_3v3>; + gpios = <&gpio GPIOD_9 GPIO_ACTIVE_HIGH>; + states = <1800000 1 + 3300000 0>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; + }; + xtal: xtal-clk { compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "xtal"; #clock-cells = <0>; }; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_pins>; + pinctrl-names = "default"; +}; + +&pwm_ao_cd { + status = "okay"; + pinctrl-0 = <&pwm_ao_c_d_pins>; + pinctrl-names = "default"; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + cap-sdio-irq; + max-frequency = <200000000>; + non-removable; + disable-wp; + no-mmc; + no-sd; + + power-domains = <&pwrc PWRC_T7_SDIO_A_ID>; + + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm43752-fmac", "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <200000000>; + disable-wp; + no-sdio; + no-mmc; + + power-domains = <&pwrc PWRC_T7_SDIO_B_ID>; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sd_3v3>; + vqmmc-supply = <&vddio_c>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + non-removable; + no-sdio; + no-sd; + + power-domains = <&pwrc PWRC_T7_EMMC_ID>; + vmmc-supply = <&vddio_3v3>; + vqmmc-supply = <&vddio_1v8>; }; &uart_a { diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi index d523cbc..cc371fc 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi @@ -6,6 +6,9 @@ #include #include #include "amlogic-t7-reset.h" +#include +#include +#include / { interrupt-parent = <&gic>; @@ -201,6 +204,34 @@ }; }; + sram@f7042000 { + compatible = "mmio-sram"; + reg = <0x0 0xf7042000 0x0 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xf7042000 0x100>; + + scmi_shmem: sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x100>; + }; + }; + + firmware { + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x820000c1>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -226,6 +257,42 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_periphs: clock-controller@0 { + compatible = "amlogic,t7-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x1c8>; + #clock-cells = <1>; + clocks = <&xtal>, + <&scmi_clk CLKID_SYS_CLK>, + <&scmi_clk CLKID_FIXED_PLL>, + <&scmi_clk CLKID_FCLK_DIV2>, + <&scmi_clk CLKID_FCLK_DIV2P5>, + <&scmi_clk CLKID_FCLK_DIV3>, + <&scmi_clk CLKID_FCLK_DIV4>, + <&scmi_clk CLKID_FCLK_DIV5>, + <&scmi_clk CLKID_FCLK_DIV7>, + <&hifi CLKID_HIFI_PLL>, + <&gp0 CLKID_GP0_PLL>, + <&gp1 CLKID_GP1_PLL>, + <&mpll CLKID_MPLL1>, + <&mpll CLKID_MPLL2>, + <&mpll CLKID_MPLL3>; + clock-names = "xtal", + "sys", + "fix", + "fdiv2", + "fdiv2p5", + "fdiv3", + "fdiv4", + "fdiv5", + "fdiv7", + "hifi", + "gp0", + "gp1", + "mpll1", + "mpll2", + "mpll3"; + }; + reset: reset-controller@2000 { compatible = "amlogic,t7-reset"; reg = <0x0 0x2000 0x0 0x98>; @@ -252,6 +319,258 @@ #gpio-cells = <2>; gpio-ranges = <&periphs_pinctrl 0 0 157>; }; + + emmc_ctrl_pins: emmc-ctrl { + mux-0 { + groups = "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; + function = "emmc"; + bias-disable; + }; + }; + + emmc_data_4b_pins: emmc-data-4b { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3"; + function = "emmc"; + bias-pull-up; + }; + }; + + emmc_data_8b_pins: emmc-data-8b { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7"; + function = "emmc"; + bias-pull-up; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + }; + }; + + emmc_clk_gate_pins: emmc-clk-gate { + mux { + groups = "GPIOB_8"; + function = "gpio_periphs"; + bias-pull-down; + }; + }; + + i2c0_ao_d_pins: i2c0-ao-d { + mux { + groups = "i2c0_ao_sck_d", + "i2c0_ao_sda_d"; + function = "i2c0_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + pwm_a_pins: pwm-a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + bias-disable; + }; + }; + + pwm_ao_a_pins: pwm-ao-a { + mux { + groups = "pwm_ao_a"; + function = "pwm_ao_a"; + bias-disable; + }; + }; + + pwm_ao_b_pins: pwm-ao-b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + bias-disable; + }; + }; + + pwm_ao_c_d_pins: pwm-ao-c-d { + mux { + groups = "pwm_ao_c_d"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_c_e_pins: pwm-ao-c-e { + mux { + groups = "pwm_ao_c_e"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_c_hiz_pins: pwm-ao-c-hiz { + mux { + groups = "pwm_ao_c_hiz"; + function = "pwm_ao_c_hiz"; + bias-disable; + }; + }; + + pwm_ao_d_pins: pwm-ao-d { + mux { + groups = "pwm_ao_d"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_e_pins: pwm-ao-e { + mux { + groups = "pwm_ao_e"; + function = "pwm_ao_e"; + bias-disable; + }; + }; + + pwm_ao_f_pins: pwm-ao-f { + mux { + groups = "pwm_ao_f"; + function = "pwm_ao_f"; + bias-disable; + }; + }; + + pwm_ao_g_pins: pwm-ao-g { + mux { + groups = "pwm_ao_g"; + function = "pwm_ao_g"; + bias-disable; + }; + }; + + pwm_ao_g_hiz_pins: pwm-ao-g-hiz { + mux { + groups = "pwm_ao_g_hiz"; + function = "pwm_ao_g_hiz"; + bias-disable; + }; + }; + + pwm_ao_h_pins: pwm-ao-h { + mux { + groups = "pwm_ao_h"; + function = "pwm_ao_h"; + bias-disable; + }; + }; + + pwm_b_pins: pwm-b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_c_pins: pwm-c { + mux { + groups = "pwm_c"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_d_pins: pwm-d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + bias-disable; + }; + }; + + pwm_f_pins: pwm-f { + mux { + groups = "pwm_f"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_vs_pins: pwm-vs { + mux { + groups = "pwm_vs"; + function = "pwm_vs"; + bias-disable; + }; + }; + + sdcard_pins: sdcard { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_clk", + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + }; + }; + + sdcard_clk_gate_pins: sdcard-clk-gate { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + }; + + sdio_clk_gate_pins: sdio-clk-gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + bias-pull-up; + }; + }; }; gpio_intc: interrupt-controller@4080 { @@ -271,6 +590,64 @@ status = "disabled"; }; + gp0: clock-controller@8080 { + compatible = "amlogic,t7-gp0-pll"; + reg = <0x0 0x8080 0x0 0x20>; + clocks = <&scmi_clk CLKID_TOP_PLL_OSC>; + clock-names = "in0"; + #clock-cells = <1>; + }; + + gp1: clock-controller@80c0 { + compatible = "amlogic,t7-gp1-pll"; + reg = <0x0 0x80c0 0x0 0x14>; + clocks = <&scmi_clk CLKID_TOP_PLL_OSC>; + clock-names = "in0"; + #clock-cells = <1>; + }; + + hifi: clock-controller@8100 { + compatible = "amlogic,t7-hifi-pll"; + reg = <0x0 0x8100 0x0 0x20>; + clocks = <&scmi_clk CLKID_TOP_PLL_OSC>; + clock-names = "in0"; + #clock-cells = <1>; + }; + + pcie: clock-controller@8140 { + compatible = "amlogic,t7-pcie-pll"; + reg = <0x0 0x8140 0x0 0x1c>; + clocks = <&scmi_clk CLKID_PCIE_OSC>; + clock-names = "in0"; + #clock-cells = <1>; + }; + + mpll: clock-controller@8180 { + compatible = "amlogic,t7-mpll"; + reg = <0x0 0x8180 0x0 0x28>; + clocks = <&scmi_clk CLKID_FIXED_PLL_DCO>; + clock-names = "in0"; + #clock-cells = <1>; + }; + + hdmi: clock-controller@81c0 { + compatible = "amlogic,t7-hdmi-pll"; + reg = <0x0 0x81c0 0x0 0x20>; + clocks = <&scmi_clk CLKID_HDMI_PLL_OSC>; + clock-names = "in0"; + #clock-cells = <1>; + }; + + mclk: clock-controller@8300 { + compatible = "amlogic,t7-mclk-pll"; + reg = <0x0 0x8300 0x0 0x18>; + clocks = <&scmi_clk CLKID_MCLK_PLL_OSC>, + <&xtal>, + <&scmi_clk CLKID_FCLK_50M>; + clock-names = "in0", "in1", "in2"; + #clock-cells = <1>; + }; + sec_ao: ao-secure@10220 { compatible = "amlogic,t7-ao-secure", "amlogic,meson-gx-ao-secure", @@ -278,6 +655,111 @@ reg = <0x0 0x10220 0x0 0x140>; amlogic,has-chip-id; }; + + pwm_ao_ef: pwm@30000 { + compatible = "amlogic,t7-pwm", "amlogic,meson-s4-pwm"; + reg = <0x0 0x30000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_AO_E>, + <&clkc_periphs CLKID_PWM_AO_F>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ao_gh: pwm@32000 { + compatible = "amlogic,t7-pwm", "amlogic,meson-s4-pwm"; + reg = <0x0 0x32000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_AO_G>, + <&clkc_periphs CLKID_PWM_AO_H>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ab: pwm@58000 { + compatible = "amlogic,t7-pwm", "amlogic,meson-s4-pwm"; + reg = <0x0 0x58000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_A>, + <&clkc_periphs CLKID_PWM_B>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@5a000 { + compatible = "amlogic,t7-pwm", "amlogic,meson-s4-pwm"; + reg = <0x0 0x5a000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_C>, + <&clkc_periphs CLKID_PWM_D>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ef: pwm@5c000 { + compatible = "amlogic,t7-pwm", "amlogic,meson-s4-pwm"; + reg = <0x0 0x5c000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_E>, + <&clkc_periphs CLKID_PWM_F>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ao_ab: pwm@5e000 { + compatible = "amlogic,t7-pwm", "amlogic,meson-s4-pwm"; + reg = <0x0 0x5e000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_AO_A>, + <&clkc_periphs CLKID_PWM_AO_B>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ao_cd: pwm@60000 { + compatible = "amlogic,t7-pwm", "amlogic,meson-s4-pwm"; + reg = <0x0 0x60000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_AO_C>, + <&clkc_periphs CLKID_PWM_AO_D>; + #pwm-cells = <3>; + status = "disabled"; + }; + + sd_emmc_a: mmc@88000 { + compatible = "amlogic,t7-mmc", "amlogic,meson-axg-mmc"; + reg = <0x0 0x88000 0x0 0x800>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>, + <&clkc_periphs CLKID_SD_EMMC_A>, + <&scmi_clk CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_A_SEL>; + assigned-clock-parents = <&xtal>; + status = "disabled"; + }; + + sd_emmc_b: mmc@8a000 { + compatible = "amlogic,t7-mmc", "amlogic,meson-axg-mmc"; + reg = <0x0 0x8a000 0x0 0x800>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>, + <&clkc_periphs CLKID_SD_EMMC_B>, + <&scmi_clk CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_B_SEL>; + assigned-clock-parents = <&xtal>; + status = "disabled"; + }; + + sd_emmc_c: mmc@8c000 { + compatible = "amlogic,t7-mmc", "amlogic,meson-axg-mmc"; + reg = <0x0 0x8c000 0x0 0x800>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>, + <&clkc_periphs CLKID_SD_EMMC_C>, + <&scmi_clk CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_C_SEL>; + assigned-clock-parents = <&xtal>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts index 393d3cb..dea3a60 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts @@ -30,6 +30,21 @@ status = "disabled"; }; +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + &usb { dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts index 27d0f61..99d5df7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "meson-s4.dtsi" +#include +#include / { model = "Khadas VIM1S"; @@ -18,6 +20,8 @@ mmc0 = &emmc; /* eMMC */ mmc1 = &sd; /* SD card */ mmc2 = &sdio; /* SDIO */ + rtc0 = &rtc; + rtc1 = &vrtc; serial0 = &uart_b; }; @@ -38,11 +42,48 @@ }; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + poll-interval = <100>; + + button-function { + label = "Function"; + linux,code = ; + press-threshold-microvolt = <10000>; + }; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio GPIOB_9 GPIO_ACTIVE_LOW>; }; + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = ; + gpios = <&gpio GPIOD_8 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + led-1 { + color = ; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + pwms = <&pwm_gh 0 30040 0>; + }; + }; + sdio_32k: sdio-32k { compatible = "pwm-clock"; #clock-cells = <0>; @@ -184,10 +225,24 @@ phy-mode = "rmii"; }; +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins2>; + clock-frequency = <100000>; + + rtc: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_pins>; pinctrl-names = "default"; + linux,rc-map-name = "rc-khadas"; }; &pwm_ef { @@ -196,6 +251,12 @@ pinctrl-names = "default"; }; +&pwm_gh { + status = "okay"; + pinctrl-0 = <&pwm_g_pins1>; + pinctrl-names = "default"; +}; + &pwm_ij { status = "okay"; }; @@ -247,6 +308,11 @@ }; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + &spicc0 { status = "okay"; pinctrl-names = "default"; @@ -254,6 +320,21 @@ cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; }; +&uart_a { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4345c5"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&sdio_32k>; + clock-names = "lpo"; + }; +}; + &uart_b { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index dfc0a30..2a6fbd5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -59,6 +59,11 @@ method = "smc"; }; + vrtc: rtc@fe010288 { + compatible = "amlogic,meson-vrtc"; + reg = <0x0 0xfe010288 0x0 0x4>; + }; + xtal: xtal-clk { compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -77,6 +82,20 @@ }; }; + saradc: adc@fe026000 { + compatible = "amlogic,meson-s4-saradc", + "amlogic,meson-g12a-saradc"; + reg = <0x0 0xfe026000 0x0 0x48>; + #io-channel-cells = <1>; + interrupts = ; + clocks = <&xtal>, + <&clkc_periphs CLKID_SAR_ADC>, + <&clkc_periphs CLKID_SARADC>, + <&clkc_periphs CLKID_SARADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -163,6 +182,22 @@ }; }; + uart_a_pins: uart-a-pins { + mux { + groups = "uart_a_tx", + "uart_a_rx"; + function = "uart_a"; + }; + }; + + uart_a_cts_rts_pins: uart-a-cts-rts-pins { + mux { + groups = "uart_a_cts", + "uart_a_rts"; + function = "uart_a"; + }; + }; + i2c0_pins1: i2c0-pins1 { mux { groups = "i2c0_sda", @@ -814,6 +849,16 @@ }; }; + uart_a: serial@fe078000 { + compatible = "amlogic,meson-s4-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0xfe078000 0x0 0x18>; + interrupts = ; + clocks = <&xtal>, <&clkc_periphs CLKID_UART_A>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + sdio: mmc@fe088000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xfe088000 0x0 0x800>; diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile index 4eebcd8..6fc3349 100644 --- a/arch/arm64/boot/dts/apple/Makefile +++ b/arch/arm64/boot/dts/apple/Makefile @@ -91,3 +91,8 @@ dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb dtb-$(CONFIG_ARCH_APPLE) += t8112-j415.dtb dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8122-j433.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8122-j434.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8122-j504.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8122-j613.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8122-j615.dtb diff --git a/arch/arm64/boot/dts/apple/t8122-j433.dts b/arch/arm64/boot/dts/apple/t8122-j433.dts new file mode 100644 index 0000000..34205d1 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8122-j433.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple iMac (24-inch, 2x USB-C, M3, 2023) + * + * target-type: J433 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8122.dtsi" +#include "t8122-usbpd-i2c.dtsi" +#include "t8122-jxxx.dtsi" + +/ { + compatible = "apple,j433", "apple,t8122", "apple,arm-platform"; + model = "Apple iMac (24-inch, 2x USB-C, M3, 2023)"; +}; diff --git a/arch/arm64/boot/dts/apple/t8122-j434.dts b/arch/arm64/boot/dts/apple/t8122-j434.dts new file mode 100644 index 0000000..ead5afd --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8122-j434.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple iMac (24-inch, 4x USB-C, M3, 2023) + * + * target-type: J434 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8122.dtsi" +#include "t8122-usbpd-i2c.dtsi" +#include "t8122-jxxx.dtsi" + +/ { + compatible = "apple,j434", "apple,t8122", "apple,arm-platform"; + model = "Apple iMac (24-inch, 4x USB-C, M3, 2023)"; +}; diff --git a/arch/arm64/boot/dts/apple/t8122-j504.dts b/arch/arm64/boot/dts/apple/t8122-j504.dts new file mode 100644 index 0000000..464491b --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8122-j504.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple MacBook Pro (14-inch, M3, 2023) + * + * target-type: J504 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8122.dtsi" +#include "t8122-usbpd-i2c.dtsi" +#include "t8122-jxxx.dtsi" +#include + +/ { + compatible = "apple,j504", "apple,t8122", "apple,arm-platform"; + model = "Apple MacBook Pro (14-inch, M3, 2023)"; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = ; + max-brightness = <255>; + default-state = "keep"; + }; + }; +}; + +&fpwm1 { + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/apple/t8122-j613.dts b/arch/arm64/boot/dts/apple/t8122-j613.dts new file mode 100644 index 0000000..51894ea --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8122-j613.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple MacBook Air (13-inch, M3, 2024) + * + * target-type: J613 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8122.dtsi" +#include "t8122-jxxx.dtsi" +#include + +/ { + compatible = "apple,j613", "apple,t8122", "apple,arm-platform"; + model = "Apple MacBook Air (13-inch, M3, 2024)"; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = ; + max-brightness = <255>; + default-state = "keep"; + }; + }; +}; + +&fpwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8122-j615.dts b/arch/arm64/boot/dts/apple/t8122-j615.dts new file mode 100644 index 0000000..2a1970c --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8122-j615.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple MacBook Air (15-inch, M3, 2024) + * + * target-type: J615 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8122.dtsi" +#include "t8122-jxxx.dtsi" +#include + +/ { + compatible = "apple,j615", "apple,t8122", "apple,arm-platform"; + model = "Apple MacBook Air (15-inch, M3, 2024)"; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = ; + max-brightness = <255>; + default-state = "keep"; + }; + }; +}; + +&fpwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8122-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8122-jxxx.dtsi new file mode 100644 index 0000000..dd85f0c --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8122-jxxx.dtsi @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple M3 MacBook Air/Pro and iMac (M3, 2023/2024) + * + * This file contains parts common to all Apple M3 devices using the t8122. + * + * target-type: J433, J434, J504, J613, J615 + * + * Copyright The Asahi Linux Contributors + */ + +/ { + aliases { + serial0 = &serial0; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0"; + + framebuffer0: framebuffer@0 { + compatible = "apple,simple-framebuffer", "simple-framebuffer"; + reg = <0 0 0 0>; /* To be filled by loader */ + power-domains = <&ps_disp_cpu>, <&ps_dptx_ext_phy>; + /* Format properties will be added by loader */ + status = "disabled"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + /* To be filled by loader */ + }; + + memory@800000000 { + device_type = "memory"; + reg = <0x8 0 0x2 0>; /* To be filled by loader */ + }; +}; + +&serial0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8122-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8122-pmgr.dtsi new file mode 100644 index 0000000..6409379 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8122-pmgr.dtsi @@ -0,0 +1,1149 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * PMGR Power domains for the Apple T8122 "M3" SoC + * + * Copyright The Asahi Linux Contributors + */ + +&pmgr { + ps_sbr: power-controller@100 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x100 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sbr"; + apple,always-on; /* Core device */ + }; + + ps_msg: power-controller@108 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x108 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "msg"; + }; + + ps_aic: power-controller@110 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x110 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "aic"; + apple,always-on; /* Core device */ + }; + + ps_dwi: power-controller@118 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x118 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dwi"; + }; + + ps_gpio: power-controller@120 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x120 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "gpio"; + }; + + ps_pms_busif: power-controller@128 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x128 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_busif"; + apple,always-on; /* Core device */ + }; + + ps_pms: power-controller@130 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x130 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms"; + apple,always-on; /* Core device */ + }; + + ps_pms_fpwm0: power-controller@138 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x138 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_fpwm0"; + power-domains = <&ps_pms>; + }; + + ps_pms_fpwm1: power-controller@140 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x140 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_fpwm1"; + power-domains = <&ps_pms>; + }; + + ps_pms_fpwm2: power-controller@148 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x148 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_fpwm2"; + power-domains = <&ps_pms>; + }; + + ps_pms_fpwm3: power-controller@150 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x150 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_fpwm3"; + power-domains = <&ps_pms>; + }; + + ps_pms_fpwm4: power-controller@158 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x158 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_fpwm4"; + power-domains = <&ps_pms>; + }; + + ps_pms_c1ppt: power-controller@160 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x160 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_c1ppt"; + }; + + ps_soc_rc: power-controller@168 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x168 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "soc_rc"; + }; + + ps_soc_dpe: power-controller@170 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x170 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "soc_dpe"; + apple,always-on; + }; + + ps_pmgr_soc_ocla: power-controller@178 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x178 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pmgr_soc_ocla"; + power-domains = <&ps_pms>; + }; + + ps_ispsens0: power-controller@180 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x180 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens0"; + }; + + ps_ispsens1: power-controller@188 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x188 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens1"; + }; + + ps_ispsens2: power-controller@190 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x190 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens2"; + }; + + ps_ispsens3: power-controller@198 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x198 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens3"; + }; + + ps_aft0: power-controller@1a8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x1a8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "aft0"; + }; + + ps_ioa0: power-controller@1b0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x1b0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ioa0"; + apple,always-on; + }; + + ps_ap_tmm: power-controller@1b8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x1b8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ap_tmm"; + }; + + ps_disp_sys: power-controller@1d8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x1d8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "disp_sys"; + apple,always-on; /* TODO: figure out if we can enable PM here */ + }; + + ps_gfx: power-controller@1e0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x1e0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "gfx"; + }; + + ps_isp_sys: power-controller@1e8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x1e8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "isp_sys"; + }; + + ps_avd_sys: power-controller@1f0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x1f0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "avd_sys"; + }; + + ps_jpg: power-controller@200 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x200 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "jpg"; + }; + + ps_disp_fe: power-controller@208 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x208 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "disp_fe"; + power-domains = <&ps_disp_sys>; + apple,always-on; /* TODO: figure out if we can enable PM here */ + }; + + ps_sio_cpu: power-controller@210 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x210 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio_cpu"; + }; + + ps_fpwm0: power-controller@218 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x218 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "fpwm0"; + }; + + ps_fpwm1: power-controller@220 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x220 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "fpwm1"; + }; + + ps_fpwm2: power-controller@228 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x228 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "fpwm2"; + }; + + ps_i2c0: power-controller@230 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x230 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c0"; + }; + + ps_i2c1: power-controller@238 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x238 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c1"; + }; + + ps_i2c2: power-controller@240 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x240 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c2"; + }; + + ps_i2c3: power-controller@248 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x248 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c3"; + }; + + ps_i2c4: power-controller@250 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x250 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c4"; + }; + + ps_i2c5: power-controller@258 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x258 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c5"; + }; + + ps_i2c6: power-controller@260 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x260 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c6"; + }; + + ps_i2c7: power-controller@268 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x268 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c7"; + }; + + ps_i2c8: power-controller@270 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x270 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c8"; + }; + + ps_spi_p: power-controller@278 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x278 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi_p"; + }; + + ps_uart_p: power-controller@280 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x280 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart_p"; + }; + + ps_audio_p: power-controller@288 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x288 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "audio_p"; + }; + + ps_aes: power-controller@290 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x290 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "aes"; + }; + + ps_spi0: power-controller@298 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x298 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi0"; + power-domains = <&ps_spi_p>; + }; + + ps_spi1: power-controller@2a0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2a0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi1"; + power-domains = <&ps_spi_p>; + }; + + ps_spi2: power-controller@2a8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2a8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi2"; + power-domains = <&ps_spi_p>; + }; + + ps_spi3: power-controller@2b0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2b0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi3"; + power-domains = <&ps_spi_p>; + }; + + ps_spi4: power-controller@2b8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2b8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi4"; + power-domains = <&ps_spi_p>; + }; + + ps_spi5: power-controller@2c0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2c0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi5"; + power-domains = <&ps_spi_p>; + }; + + ps_qspi: power-controller@2c8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2c8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "qspi"; + power-domains = <&ps_spi_p>; + }; + + ps_uart_n: power-controller@2d0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2d0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart_n"; + power-domains = <&ps_uart_p>; + }; + + ps_uart0: power-controller@2d8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2d8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart0"; + power-domains = <&ps_uart_p>; + }; + + ps_uart1: power-controller@2e0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2e0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart1"; + power-domains = <&ps_uart_p>; + }; + + ps_uart2: power-controller@2e8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2e8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart2"; + power-domains = <&ps_uart_p>; + }; + + ps_uart3: power-controller@2f0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2f0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart3"; + power-domains = <&ps_uart_p>; + }; + + ps_uart4: power-controller@2f8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x2f8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart4"; + power-domains = <&ps_uart_p>; + }; + + ps_uart5: power-controller@300 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x300 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart5"; + power-domains = <&ps_uart_p>; + }; + + ps_uart6: power-controller@308 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x308 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart6"; + power-domains = <&ps_uart_p>; + }; + + ps_sio_adma: power-controller@310 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x310 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio_adma"; + power-domains = <&ps_fpwm0>; + }; + + ps_dpa0: power-controller@318 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x318 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dpa0"; + power-domains = <&ps_audio_p>; + }; + + ps_dcs0: power-controller@330 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x330 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs0"; + apple,always-on; + }; + + ps_dcs2: power-controller@338 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x338 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs2"; + apple,always-on; + }; + + ps_dcs1: power-controller@340 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x340 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs1"; + apple,always-on; + }; + + ps_dcs3: power-controller@348 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x348 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs3"; + apple,always-on; + }; + + ps_dcs4: power-controller@358 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x358 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs4"; + apple,always-on; + }; + + ps_dcs5: power-controller@360 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x360 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs5"; + apple,always-on; + }; + + ps_dcs6: power-controller@368 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x368 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs6"; + apple,always-on; + }; + + ps_dcs7: power-controller@370 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x370 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs7"; + apple,always-on; + }; + + ps_dpa1: power-controller@378 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x378 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dpa1"; + power-domains = <&ps_audio_p>; + }; + + ps_dpa2: power-controller@380 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x380 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dpa2"; + power-domains = <&ps_audio_p>; + }; + + ps_dpa3: power-controller@388 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x388 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dpa3"; + power-domains = <&ps_audio_p>; + }; + + ps_dpa4: power-controller@390 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x390 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dpa4"; + power-domains = <&ps_audio_p>; + }; + + ps_mca0: power-controller@398 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x398 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca0"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca1: power-controller@3a0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x3a0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca1"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca2: power-controller@3a8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x3a8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca2"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_trace_fab: power-controller@3b0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x3b0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "trace_fab"; + }; + + ps_mca3: power-controller@3b8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x3b8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca3"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_ioa1: power-controller@3c0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x3c0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ioa1"; + apple,always-on; + }; + + ps_apcie: power-controller@3f0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x3f0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie"; + }; + + ps_ans: power-controller@3f8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x3f8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ans"; + }; + + ps_atc0_common: power-controller@400 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x400 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_common"; + }; + + ps_atc1_common: power-controller@408 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x408 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_common"; + }; + + ps_dispext_sys: power-controller@410 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x410 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispext_sys"; + }; + + ps_venc_sys: power-controller@418 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x418 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_sys"; + }; + + ps_scodec: power-controller@420 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x420 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "scodec"; + }; + + ps_msr: power-controller@428 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x428 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "msr"; + power-domains = <&ps_aft0>; + }; + + ps_dptx_ext_phy: power-controller@430 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x430 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dptx_ext_phy"; + }; + + ps_ane_sys: power-controller@438 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x438 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ane_sys"; + }; + + ps_apcie_gp: power-controller@440 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x440 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie_gp"; + power-domains = <&ps_apcie>; + }; + + ps_apcie_st: power-controller@448 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x448 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie_st"; + power-domains = <&ps_ans>, <&ps_apcie>; + }; + + ps_pmp: power-controller@450 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x450 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pmp"; + apple,always-on; + }; + + ps_pms_sram: power-controller@458 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x458 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_sram"; + apple,always-on; + }; + + ps_atc0_pcie: power-controller@460 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x460 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_pcie"; + power-domains = <&ps_atc0_common>; + }; + + ps_atc0_cio: power-controller@468 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x468 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_cio"; + power-domains = <&ps_atc0_common>; + }; + + ps_atc1_pcie: power-controller@470 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x470 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_pcie"; + power-domains = <&ps_atc1_common>; + }; + + ps_atc1_cio: power-controller@478 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x478 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_cio"; + power-domains = <&ps_atc1_common>; + }; + + ps_dispext_fe: power-controller@480 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x480 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispext_fe"; + power-domains = <&ps_dispext_sys>; + }; + + ps_dispext_cpu: power-controller@488 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x488 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispext_cpu"; + power-domains = <&ps_dispext_fe>; + apple,min-state = <4>; + }; + + ps_scodec_stream: power-controller@490 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x490 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "scodec_stream"; + power-domains = <&ps_scodec>; + }; + + ps_msr_ase_core: power-controller@498 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x498 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "msr_ase_core"; + power-domains = <&ps_msr>; + }; + + ps_apcie_phy_sw: power-controller@4a0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x4a0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie_phy_sw"; + power-domains = <&ps_apcie_st>, <&ps_apcie_gp>; + }; + + ps_atc0_cio_pcie: power-controller@4a8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x4a8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_cio_pcie"; + power-domains = <&ps_atc0_cio>; + }; + + ps_atc0_cio_usb: power-controller@4b0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x4b0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_cio_usb"; + power-domains = <&ps_atc0_cio>; + }; + + ps_atc1_cio_pcie: power-controller@4b8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x4b8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_cio_pcie"; + power-domains = <&ps_atc1_cio>; + }; + + ps_atc1_cio_usb: power-controller@4c0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x4c0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_cio_usb"; + power-domains = <&ps_atc1_cio>; + }; + + ps_sep: power-controller@c00 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0xc00 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sep"; + apple,always-on; + }; + + ps_venc_dma: power-controller@8000 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x8000 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_dma"; + power-domains = <&ps_venc_sys>; + }; + + ps_venc_pipe4: power-controller@8008 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x8008 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_pipe4"; + power-domains = <&ps_venc_dma>; + }; + + ps_venc_pipe5: power-controller@8010 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x8010 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_pipe5"; + power-domains = <&ps_venc_dma>; + }; + + ps_venc_me0: power-controller@8018 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x8018 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_me0"; + power-domains = <&ps_venc_dma>; + }; + + ps_venc_me1: power-controller@8020 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x8020 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_me1"; + power-domains = <&ps_venc_me0>; + }; + + ps_disp_cpu: power-controller@10000 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x10000 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "disp_cpu"; + power-domains = <&ps_disp_fe>; + apple,min-state = <4>; + }; +}; + +&pmgr_mini { + + ps_debug_gated: power-controller@0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "debug_gated"; + apple,always-on; + }; + + ps_nub_spmi0: power-controller@58 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x58 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_spmi0"; + apple,always-on; + }; + + ps_nub_spmi1: power-controller@60 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x60 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_spmi1"; + apple,always-on; + }; + + ps_nub_spmi2: power-controller@68 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x68 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_spmi2"; + apple,always-on; + }; + + ps_nub_spmi_a0: power-controller@70 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x70 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_spmi_a0"; + apple,always-on; + }; + + ps_nub_aon: power-controller@78 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x78 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_aon"; + apple,always-on; + }; + + ps_nub_spi0: power-controller@80 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x80 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_spi0"; + apple,always-on; + }; + + ps_nub_ocla: power-controller@88 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x88 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_ocla"; + apple,always-on; + }; + + ps_nub_gpio: power-controller@90 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x90 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_gpio"; + apple,always-on; + }; + + ps_nub_fabric: power-controller@98 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0x98 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_fabric"; + apple,always-on; + }; + + ps_nub_sram: power-controller@a0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0xa0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_sram"; + apple,always-on; + }; + + ps_debug_switch: power-controller@a8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0xa8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "debug_switch"; + apple,always-on; + }; + + ps_atc0_usb_aon: power-controller@b0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0xb0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_usb_aon"; + }; + + ps_atc1_usb_aon: power-controller@b8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0xb8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_usb_aon"; + }; + + ps_atc0_usb: power-controller@c0 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0xc0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_usb"; + power-domains = <&ps_atc0_usb_aon>, <&ps_atc0_common>; + }; + + ps_atc1_usb: power-controller@c8 { + compatible = "apple,t8122-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate"; + reg = <0xc8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_usb"; + power-domains = <&ps_atc1_usb_aon>, <&ps_atc1_common>; + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8122-usbpd-i2c.dtsi b/arch/arm64/boot/dts/apple/t8122-usbpd-i2c.dtsi new file mode 100644 index 0000000..112c519 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8122-usbpd-i2c.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple M3 MacBook Pro and iMac (M3, 2023) I2C based USB PD controller nodes + * + * This file contains nodes for t8122 devices using I2C based cd321x USB Type-C + * port controllers. The are used in the M3 MacBook Pro and iMacs but not in the + * M3 Macbook Airs. + * + * target-type: J433, J434, J504 + * + * Copyright The Asahi Linux Contributors + */ + +&i2c0 { + status = "okay"; + + hpm0: usb-pd@38 { + compatible = "apple,cd321x"; + reg = <0x38>; + interrupt-parent = <&pinctrl_ap>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + }; + + hpm1: usb-pd@3f { + compatible = "apple,cd321x"; + reg = <0x3f>; + interrupt-parent = <&pinctrl_ap>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8122.dtsi b/arch/arm64/boot/dts/apple/t8122.dtsi new file mode 100644 index 0000000..c619622 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8122.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple T8122 "M3" SoC + * + * Other names: H15G + * + * Copyright The Asahi Linux Contributors + */ + +#include +#include +#include +#include +#include +#include + +/ { + compatible = "apple,t8122", "apple,arm-platform"; + + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu_e0>; + }; + core1 { + cpu = <&cpu_e1>; + }; + core2 { + cpu = <&cpu_e2>; + }; + core3 { + cpu = <&cpu_e3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu_p0>; + }; + core1 { + cpu = <&cpu_p1>; + }; + core2 { + cpu = <&cpu_p2>; + }; + core3 { + cpu = <&cpu_p3>; + }; + }; + }; + + cpu_e0: cpu@0 { + compatible = "apple,sawtooth"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_e1: cpu@1 { + compatible = "apple,sawtooth"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_e2: cpu@2 { + compatible = "apple,sawtooth"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_e3: cpu@3 { + compatible = "apple,sawtooth"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_p0: cpu@10100 { + compatible = "apple,everest"; + device_type = "cpu"; + reg = <0x0 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + cpu_p1: cpu@10101 { + compatible = "apple,everest"; + device_type = "cpu"; + reg = <0x0 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + cpu_p2: cpu@10102 { + compatible = "apple,everest"; + device_type = "cpu"; + reg = <0x0 0x10102>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + cpu_p3: cpu@10103 { + compatible = "apple,everest"; + device_type = "cpu"; + reg = <0x0 0x10103>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + l2_cache_0: l2-cache-0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x400000>; + }; + + l2_cache_1: l2-cache-1 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x1000000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&aic>; + interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt"; + interrupts = , + , + , + ; + }; + + clkref: clock-ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "clkref"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges; + nonposted-mmio; + /* Required to get >32-bit DMA via DARTs */ + dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>; + + i2c0: i2c@235010000 { + compatible = "apple,t8122-i2c", "apple,t8103-i2c"; + reg = <0x2 0x35010000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = ; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c0>; + status = "disabled"; + }; + + i2c1: i2c@235014000 { + compatible = "apple,t8122-i2c", "apple,t8103-i2c"; + reg = <0x2 0x35014000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = ; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c1>; + status = "disabled"; + }; + + i2c2: i2c@235018000 { + compatible = "apple,t8122-i2c", "apple,t8103-i2c"; + reg = <0x2 0x35018000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = ; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c2>; + status = "disabled"; + }; + + i2c3: i2c@23501c000 { + compatible = "apple,t8122-i2c", "apple,t8103-i2c"; + reg = <0x2 0x3501c000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = ; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c3>; + status = "disabled"; + }; + + i2c4: i2c@235020000 { + compatible = "apple,t8122-i2c", "apple,t8103-i2c"; + reg = <0x2 0x35020000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = ; + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c4>; + status = "disabled"; + }; + + fpwm1: pwm@2a1044000 { + compatible = "apple,t8122-fpwm", "apple,s5l-fpwm"; + reg = <0x2 0xa1044000 0x0 0x4000>; + power-domains = <&ps_fpwm1>; + clocks = <&clkref>; + #pwm-cells = <2>; + status = "disabled"; + }; + + serial0: serial@2a1200000 { + compatible = "apple,s5l-uart"; + reg = <0x2 0xa1200000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&aic>; + interrupts = ; + /* + * TODO: figure out the clocking properly, there may + * be a third selectable clock. + */ + clocks = <&clkref>, <&clkref>; + clock-names = "uart", "clk_uart_baud0"; + power-domains = <&ps_uart0>; + status = "disabled"; + }; + + aic: interrupt-controller@2d1000000 { + compatible = "apple,t8122-aic3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2 0xd1000000 0x0 0x184000>, + <0x2 0xd1040000 0x0 0x4>; + reg-names = "core", "event"; + power-domains = <&ps_aic>; + + affinities { + e-core-pmu-affinity { + apple,fiq-index = ; + cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>; + }; + + p-core-pmu-affinity { + apple,fiq-index = ; + cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>; + }; + }; + }; + + pmgr: power-management@2d0700000 { + compatible = "apple,t8122-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2 0xd0700000 0 0x14000>; + /* child nodes are added in t8122-pmgr.dtsi */ + }; + + pinctrl_ap: pinctrl@2c7100000 { + compatible = "apple,t8122-pinctrl", "apple,t8103-pinctrl"; + reg = <0x2 0xc7100000 0x0 0x100000>; + power-domains = <&ps_gpio>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_ap 0 0 224>; + apple,npins = <224>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = , + , + , + , + , + , + ; + + i2c0_pins: i2c0-pins { + pinmux = , + ; + }; + + i2c1_pins: i2c1-pins { + pinmux = , + ; + }; + + i2c2_pins: i2c2-pins { + pinmux = , + ; + }; + + i2c3_pins: i2c3-pins { + pinmux = , + ; + }; + + i2c4_pins: i2c4-pins { + pinmux = , + ; + }; + + }; + + pinctrl_nub: pinctrl@2e41f0000 { + compatible = "apple,t8122-pinctrl", "apple,t8103-pinctrl"; + reg = <0x2 0xe41f0000 0x0 0x4000>; + power-domains = <&ps_nub_gpio>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_nub 0 0 32>; + apple,npins = <32>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = , + , + , + , + , + , + ; + }; + + pmgr_mini: power-management@2e4280000 { + compatible = "apple,t8122-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2 0xe4280000 0 0x4000>; + /* child nodes are added in t8122-pmgr.dtsi */ + }; + + wdt: watchdog@2e42b0000 { + compatible = "apple,t8122-wdt", "apple,t8103-wdt"; + reg = <0x2 0xe42b0000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = ; + }; + + pinctrl_smc: pinctrl@2ec820000 { + compatible = "apple,t8122-pinctrl", "apple,t8103-pinctrl"; + reg = <0x2 0xec820000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_smc 0 0 18>; + apple,npins = <18>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = , + , + , + , + , + , + ; + }; + + pinctrl_aop: pinctrl@2f4824000 { + compatible = "apple,t8122-pinctrl", "apple,t8103-pinctrl"; + reg = <0x2 0xf4824000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aop 0 0 54>; + apple,npins = <54>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = , + , + , + , + , + , + ; + }; + }; +}; + +#include "t8122-pmgr.dtsi" diff --git a/arch/arm64/boot/dts/aspeed/Makefile b/arch/arm64/boot/dts/aspeed/Makefile new file mode 100644 index 0000000..ffe7e15 --- /dev/null +++ b/arch/arm64/boot/dts/aspeed/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +dtb-$(CONFIG_ARCH_ASPEED) += \ + ast2700-evb.dtb diff --git a/arch/arm64/boot/dts/aspeed/aspeed-evb-flash-layout-128.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-evb-flash-layout-128.dtsi new file mode 100644 index 0000000..b54915f --- /dev/null +++ b/arch/arm64/boot/dts/aspeed/aspeed-evb-flash-layout-128.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0x400000>; // 4MB + label = "u-boot"; + }; + + u-boot-env@400000 { + reg = <0x400000 0x20000>; // 128KB + label = "u-boot-env"; + }; + + kernel@420000 { + reg = <0x420000 0x900000>; // 9MB + label = "kernel"; + }; + + rofs@d20000 { + reg = <0xd20000 0x52E0000>; // 82.875MB + label = "rofs"; + }; + + rwfs@6000000 { + reg = <0x6000000 0x2000000>; // 32MB + label = "rwfs"; + }; +}; diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7-a35.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7-a35.dtsi new file mode 100644 index 0000000..58193c3 --- /dev/null +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7-a35.dtsi @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree Source for AST27xx SoC Family + * + * Copyright (C) 2026 ASPEED Technology Inc. + */ + +#include + +/ { + compatible = "aspeed,ast2700"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x2>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x3>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <1024>; + }; + }; + + secondary { + #address-cells = <1>; + #size-cells = <0>; + + ssp_nvic: interrupt-controller@e000e100 { + compatible = "arm,v7m-nvic"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xe000e100>; + arm,num-irq-priority-bits = <3>; + status = "disabled"; + }; + }; + + tertiary { + #address-cells = <1>; + #size-cells = <0>; + + tsp_nvic: interrupt-controller@e000e100 { + compatible = "arm,v7m-nvic"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xe000e100>; + arm,num-irq-priority-bits = <3>; + status = "disabled"; + }; + }; + + bootmcu { + bootmcu_hlic: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + status = "disabled"; + }; + }; + + firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + atf: trusted-firmware-a@430000000 { + reg = <0x4 0x30000000 0x0 0x80000>; + no-map; + }; + + optee_core: optee-core@430080000 { + reg = <0x4 0x30080000 0x0 0x1000000>; + no-map; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a35-pmu"; + interrupts = ; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + arm,cpu-registers-not-fw-configured; + always-on; + }; + + gic: interrupt-controller@12200000 { + compatible = "arm,gic-v3"; + reg = <0 0x12200000 0 0x10000>, /* GICD */ + <0 0x12280000 0 0x80000>, /* GICR */ + <0 0x40440000 0 0x1000>; /* GICC */ + interrupts = ; + #interrupt-cells = <3>; + interrupt-controller; + }; + + soc0: bus@10000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x4000000>; + }; + + soc1: bus@14000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x14000000 0x0 0x14000000 0x2 0xec000000>; + }; +}; + +#include "aspeed-g7-soc0.dtsi" +#include "aspeed-g7-soc1.dtsi" diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7-soc0-pinctrl.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7-soc0-pinctrl.dtsi new file mode 100644 index 0000000..ed58ee4 --- /dev/null +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7-soc0-pinctrl.dtsi @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +// Copyright 2025 ASPEED Corp. + +&pinctrl0 { + pinctrl_emmc_default: emmc-default-state { + function = "EMMC"; + groups = "EMMCG1"; + }; + pinctrl_emmcg4_default: emmcg4-default-state { + function = "EMMC"; + groups = "EMMCG4"; + }; + pinctrl_emmcg8_default: emmcg8-default-state { + function = "EMMC"; + groups = "EMMCG8"; + }; + pinctrl_emmcwpn_default: emmcwpn-default-state { + function = "EMMC"; + groups = "EMMCWPN"; + }; + pinctrl_emmccdn_default: emmccdn-default-state { + function = "EMMC"; + groups = "EMMCCDN"; + }; + pinctrl_vb1_default: vb1-default-state { + function = "VB"; + groups = "VB1"; + }; + pinctrl_vb0_default: vb0-default-state { + function = "VB"; + groups = "VB0"; + }; + pinctrl_tsprstn_default: tsprstn-default-state { + function = "TSPRSTN"; + groups = "TSPRSTN"; + }; + pinctrl_ufsclki_default: ufsclki-default-state { + function = "UFSCLKI"; + groups = "UFSCLKI"; + }; + pinctrl_vgaddc_default: vgaddc-default-state { + function = "VGADDC"; + groups = "VGADDC"; + }; + pinctrl_usb3axhd_default: usb3axhd-default-state { + function = "USB3AXHD"; + groups = "USB3A"; + }; + pinctrl_usb3axhpd_default: usb3axhpd-default-state { + function = "USB3AXHPD"; + groups = "USB3A"; + }; + pinctrl_usb3axh_default: usb3axh-default-state { + function = "USB3AXH"; + groups = "USB3AAP"; + }; + pinctrl_usb3axhp_default: usb3axhp-default-state { + function = "USB3AXHP"; + groups = "USB3AAP"; + }; + pinctrl_usb3axh2b_default: usb3axh2b-default-state { + function = "USB3AXH2B"; + groups = "USB3ABP"; + }; + pinctrl_usb3axhp2b_default: usb3axhp2b-default-state { + function = "USB3AXHP2B"; + groups = "USB3ABP"; + }; + pinctrl_usb2axhd1_default: usb2axhd1-default-state { + function = "USB2AXHD1"; + groups = "USB2A"; + }; + pinctrl_usb2axhpd1_default: usb2axhpd1-default-state { + function = "USB2AXHPD1"; + groups = "USB2A"; + }; + pinctrl_usb2ad1_default: usb2ad1-default-state { + function = "USB2AD1"; + groups = "USB2ADAP"; + }; + pinctrl_usb2axh_default: usb2axh-default-state { + function = "USB2AXH"; + groups = "USB2AAP"; + }; + pinctrl_usb2axhp_default: usb2axhp-default-state { + function = "USB2AXHP"; + groups = "USB2AAP"; + }; + pinctrl_usb2axh2b_default: usb2axh2b-default-state { + function = "USB2AXH2B"; + groups = "USB2ABP"; + }; + pinctrl_usb2axhp2b_default: usb2axhp2b-default-state { + function = "USB2AXHP2B"; + groups = "USB2ABP"; + }; + pinctrl_usb2ahpd0_default: usb2ahpd0-default-state { + function = "USB2AHPD0"; + groups = "USB2AH"; + }; + pinctrl_usb2ad0_default: usb2ad0-default-state { + function = "USB2AD0"; + groups = "USB2AHAP"; + }; + pinctrl_usb2ah_default: usb2ah-default-state { + function = "USB2AH"; + groups = "USB2AHAP"; + }; + pinctrl_usb2ahp_default: usb2ahp-default-state { + function = "USB2AHP"; + groups = "USB2AHAP"; + }; + pinctrl_usb3bxhd_default: usb3bxhd-default-state { + function = "USB3BXHD"; + groups = "USB3B"; + }; + pinctrl_usb3bxhpd_default: usb3bxhpd-default-state { + function = "USB3BXHPD"; + groups = "USB3B"; + }; + pinctrl_usb3bxh_default: usb3bxh-default-state { + function = "USB3BXH"; + groups = "USB3BBP"; + }; + pinctrl_usb3bxhp_default: usb3bxhp-default-state { + function = "USB3BXHP"; + groups = "USB3BBP"; + }; + pinctrl_usb3bxh2a_default: usb3bxh2a-default-state { + function = "USB3BXH2A"; + groups = "USB3BAP"; + }; + pinctrl_usb3bxhp2a_default: usb3bxhp2a-default-state { + function = "USB3BXHP2A"; + groups = "USB3BAP"; + }; + pinctrl_usb2bxhd1_default: usb2bxhd1-default-state { + function = "USB2BXHD1"; + groups = "USB2B"; + }; + pinctrl_usb2bxhpd1_default: usb2bxhpd1-default-state { + function = "USB2BXHPD1"; + groups = "USB2B"; + }; + pinctrl_usb2bd1_default: usb2bd1-default-state { + function = "USB2BD1"; + groups = "USB2BDBP"; + }; + pinctrl_usb2bxh_default: usb2bxh-default-state { + function = "USB2BXH"; + groups = "USB2BBP"; + }; + pinctrl_usb2bxhp_default: usb2bxhp-default-state { + function = "USB2BXHP"; + groups = "USB2BBP"; + }; + pinctrl_usb2bxh2a_default: usb2bxh2a-default-state { + function = "USB2BXH2A"; + groups = "USB2BAP"; + }; + pinctrl_usb2bxhp2a_default: usb2bxhp2a-default-state { + function = "USB2BXHP2A"; + groups = "USB2BAP"; + }; + pinctrl_usb2bhpd0_default: usb2bhpd0-default-state { + function = "USB2BHPD0"; + groups = "USB2BH"; + }; + pinctrl_usb2bd0_default: usb2bd0-default-state { + function = "USB2BD0"; + groups = "USB2BHBP"; + }; + pinctrl_usb2bh_default: usb2bh-default-state { + function = "USB2BH"; + groups = "USB2BHBP"; + }; + pinctrl_usb2bhp_default: usb2bhp-default-state { + function = "USB2BHP"; + groups = "USB2BHBP"; + }; + pinctrl_jtagm0_default: jtagm0-default-state { + function = "JTAGM0"; + groups = "JTAG0"; + }; + pinctrl_jtag_psp_default: jtag-psp-default-state { + function = "JTAGPSP"; + groups = "JTAG0"; + }; + pinctrl_jtag_ssp_default: jtag-ssp-default-state { + function = "JTAGSSP"; + groups = "JTAG0"; + }; + pinctrl_jtag_tsp_default: jtag-tsp-default-state { + function = "JTAGTSP"; + groups = "JTAG0"; + }; + pinctrl_jtag_ddr_default: jtag-ddr-default-state { + function = "JTAGDDR"; + groups = "JTAG0"; + }; + pinctrl_jtag_usb3a_default: jtag-usb3a-default-state { + function = "JTAGUSB3A"; + groups = "JTAG0"; + }; + pinctrl_jtag_usb3b_default: jtag-usb3b-default-state { + function = "JTAGUSB3B"; + groups = "JTAG0"; + }; + pinctrl_jtag_pciea_default: jtag-pciea-default-state { + function = "JTAGPCIEA"; + groups = "JTAG0"; + }; + pinctrl_jtag_pcieb_default: jtag-pcieb-default-state { + function = "JTAGPCIEB"; + groups = "JTAG0"; + }; + pinctrl_pcierc0_perst_default: pcierc0-perst-default-state { + function = "PCIERC0PERST"; + groups = "PCIERC0PERST"; + }; + pinctrl_pcierc1_perst_default: pcierc1-perst-default-state { + function = "PCIERC1PERST"; + groups = "PCIERC1PERST"; + }; +}; diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7-soc0.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7-soc0.dtsi new file mode 100644 index 0000000..db42db2 --- /dev/null +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7-soc0.dtsi @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree Source for AST27xx SoC Family Main Domain peripherals + * + * Copyright (C) 2026 ASPEED Technology Inc. + */ + +#include +#include +#include + +&soc0 { + sram0: sram@10000000 { + compatible = "mmio-sram"; + reg = <0x0 0x10000000 0x0 0x20000>; + ranges = <0x0 0x0 0x10000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + + soc0-sram@0 { + reg = <0x0 0x20000>; + export; + }; + }; + + vhuba1: usb-vhub@12011000 { + compatible = "aspeed,ast2700-usb-vhub"; + reg = <0x0 0x12011000 0x0 0x820>; + interrupts-extended = <&intc0 32>; + clocks = <&syscon0 SCU0_CLK_GATE_PORTAUSB2CLK>; + resets = <&syscon0 SCU0_RESET_PORTA_VHUB>; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2axhpd1_default>; + status = "disabled"; + }; + + vhubb1: usb-vhub@12021000 { + compatible = "aspeed,ast2700-usb-vhub"; + reg = <0x0 0x12021000 0x0 0x820>; + interrupts-extended = <&intc0 36>; + clocks = <&syscon0 SCU0_CLK_GATE_PORTBUSB2CLK>; + resets = <&syscon0 SCU0_RESET_PORTB_VHUB>; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bxhpd1_default>; + status = "disabled"; + }; + + uhci0: usb@12040000 { + compatible = "aspeed,ast2700-uhci", "generic-uhci"; + reg = <0x0 0x12040000 0x0 0x100>; + interrupts-extended = <&intc0 10>; + #ports = <2>; + clocks = <&syscon0 SCU0_CLK_GATE_UHCICLK>; + resets = <&syscon0 SCU0_RESET_UHCI>; + status = "disabled"; + }; + + vhuba0: usb-vhub@12060000 { + compatible = "aspeed,ast2700-usb-vhub"; + reg = <0x0 0x12060000 0x0 0x820>; + interrupts-extended = <&intc0 33>; + clocks = <&syscon0 SCU0_CLK_GATE_PORTAUSB2CLK>; + resets = <&syscon0 SCU0_RESET_PORTA_VHUB_EHCI>; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad0_default>; + status = "disabled"; + }; + + ehci0: usb@12061000 { + compatible = "aspeed,ast2700-ehci", "generic-ehci"; + reg = <0x0 0x12061000 0x0 0x100>; + interrupts-extended = <&intc0 33>; + clocks = <&syscon0 SCU0_CLK_GATE_PORTAUSB2CLK>; + resets = <&syscon0 SCU0_RESET_PORTA_VHUB_EHCI>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ah_default>; + status = "disabled"; + }; + + vhubb0: usb-vhub@12062000 { + compatible = "aspeed,ast2700-usb-vhub"; + reg = <0x0 0x12062000 0x0 0x820>; + interrupts-extended = <&intc0 37>; + clocks = <&syscon0 SCU0_CLK_GATE_PORTBUSB2CLK>; + resets = <&syscon0 SCU0_RESET_PORTB_VHUB_EHCI>; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bd0_default>; + status = "disabled"; + }; + + ehci1: usb@12063000 { + compatible = "aspeed,ast2700-ehci", "generic-ehci"; + reg = <0x0 0x12063000 0x0 0x100>; + interrupts-extended = <&intc0 37>; + clocks = <&syscon0 SCU0_CLK_GATE_PORTBUSB2CLK>; + resets = <&syscon0 SCU0_RESET_PORTB_VHUB_EHCI>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bh_default>; + status = "disabled"; + }; + + emmc_controller: sdc@12090000 { + compatible = "aspeed,ast2700-sd-controller", "aspeed,ast2600-sd-controller"; + reg = <0 0x12090000 0 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x12090000 0x10000>; + clocks = <&syscon0 SCU0_CLK_GATE_EMMCCLK>; + resets = <&syscon0 SCU0_RESET_EMMC>; + status = "disabled"; + + emmc: sdhci@100 { + compatible = "aspeed,ast2700-sdhci", "aspeed,ast2600-sdhci"; + reg = <0x100 0x100>; + sdhci,auto-cmd12; + interrupts-extended = <&intc0 15>; + clocks = <&syscon0 SCU0_CLK_GATE_EMMCCLK>; + status = "disabled"; + }; + }; + + intc0: interrupt-controller@12100000 { + compatible = "aspeed,ast2700-intc0"; + reg = <0x0 0x12100000 0x0 0x3c00>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + aspeed,interrupt-ranges = + <0 128 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* linear range 1 to 1*/ + <144 8 &gic GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* sw int SSP */ + <152 8 &gic GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, /* sw int TSP */ + <192 10 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* M0-M9 intm */ + <208 10 &gic GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, /* M30-M39 intm */ + <224 10 &gic GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* M40-M49 intm */ + <256 128 &ssp_nvic 0 0 >, /* linear to SSP */ + <384 10 &ssp_nvic 160 0 >, /* cascaded to SSP via M10-M19 */ + <400 8 &ssp_nvic 144 0 >, /* sw int PSP */ + <408 8 &ssp_nvic 152 0 >, /* sw int TSP */ + <426 128 &tsp_nvic 0 0 >, /* linear to TSP */ + <554 10 &tsp_nvic 160 0 >, /* cascaded to TSP via M20-M29 */ + <570 8 &tsp_nvic 144 0 >, /* sw int PSP */ + <578 8 &tsp_nvic 152 0 >; /* sw int TSP */ + }; + + syscon0: syscon@12c02000 { + compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd"; + reg = <0x0 0x12c02000 0x0 0x1000>; + ranges = <0x0 0x0 0x12c02000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + + silicon-id@0 { + compatible = "aspeed,ast2700-silicon-id", "aspeed,silicon-id"; + reg = <0x0 0x4>; + }; + + scu_ic0: interrupt-controller@1d0 { + compatible = "aspeed,ast2700-scu-ic0"; + reg = <0x1d0 0xc>; + interrupts-extended = <&intc0 97>; + #interrupt-cells = <1>; + interrupt-controller; + }; + + scu_ic1: interrupt-controller@1e0 { + compatible = "aspeed,ast2700-scu-ic1"; + reg = <0x1e0 0xc>; + interrupts-extended = <&intc0 98>; + #interrupt-cells = <1>; + interrupt-controller; + }; + + pinctrl0: pinctrl@400 { + compatible = "aspeed,ast2700-soc0-pinctrl"; + reg = <0x400 0x318>; + }; + }; + + gpio0: gpio@12c11000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2700-gpio"; + reg = <0x0 0x12c11000 0x0 0x1000>; + interrupts-extended = <&intc0 11>; + gpio-ranges = <&pinctrl0 0 0 12>; + ngpios = <12>; + clocks = <&syscon0 SCU0_CLK_APB>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart4: serial@12c1a000 { + compatible = "ns16550a"; + reg = <0x0 0x12c1a000 0x0 0x1000>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon0 SCU0_CLK_GATE_UART4CLK>; + interrupts-extended = <&intc0 8>; + no-loopback-test; + status = "disabled"; + }; + + mbox0: mbox@12c1c200 { + compatible = "aspeed,ast2700-mailbox"; + reg = <0x0 0x12c1c200 0x0 0x100>, <0x0 0x12c1c300 0x0 0x100>; + reg-names = "tx", "rx"; + interrupts-extended = <&intc0 103>; + #mbox-cells = <1>; + }; + + mbox1: mbox@12c1c600 { + compatible = "aspeed,ast2700-mailbox"; + reg = <0x0 0x12c1c600 0x0 0x100>, <0x0 0x12c1c700 0x0 0x100>; + reg-names = "tx", "rx"; + interrupts-extended = <&intc0 107>; + #mbox-cells = <1>; + }; +}; + +#include "aspeed-g7-soc0-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7-soc1-pinctrl.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7-soc1-pinctrl.dtsi new file mode 100644 index 0000000..6edf146 --- /dev/null +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7-soc1-pinctrl.dtsi @@ -0,0 +1,1011 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +// Copyright 2025 ASPEED Corp. + +&pinctrl1 { + pinctrl_sgpm0_default: sgpm0-default-state { + function = "SGPM0"; + groups = "SGPM0"; + }; + + pinctrl_dsgpm0_default: dsgpm0-default-state { + function = "SGPM0"; + groups = "DSGPM0"; + }; + + pinctrl_sgpm1_default: sgpm1-default-state { + function = "SGPM1"; + groups = "SGPM1"; + }; + + pinctrl_sgps_default: sgps-default-state { + function = "SGPS"; + groups = "SGPS"; + }; + + pinctrl_adc0_default: adc0-default-state { + function = "ADC0"; + groups = "ADC0"; + }; + + pinctrl_adc1_default: adc1-default-state { + function = "ADC1"; + groups = "ADC1"; + }; + + pinctrl_adc2_default: adc2-default-state { + function = "ADC2"; + groups = "ADC2"; + }; + + pinctrl_adc3_default: adc3-default-state { + function = "ADC3"; + groups = "ADC3"; + }; + + pinctrl_adc4_default: adc4-default-state { + function = "ADC4"; + groups = "ADC4"; + }; + + pinctrl_adc5_default: adc5-default-state { + function = "ADC5"; + groups = "ADC5"; + }; + + pinctrl_adc6_default: adc6-default-state { + function = "ADC6"; + groups = "ADC6"; + }; + + pinctrl_adc7_default: adc7-default-state { + function = "ADC7"; + groups = "ADC7"; + }; + + pinctrl_adc8_default: adc8-default-state { + function = "ADC8"; + groups = "ADC8"; + }; + + pinctrl_adc9_default: adc9-default-state { + function = "ADC9"; + groups = "ADC9"; + }; + + pinctrl_adc10_default: adc10-default-state { + function = "ADC10"; + groups = "ADC10"; + }; + + pinctrl_adc11_default: adc11-default-state { + function = "ADC11"; + groups = "ADC11"; + }; + + pinctrl_adc12_default: adc12-default-state { + function = "ADC12"; + groups = "ADC12"; + }; + + pinctrl_adc13_default: adc13-default-state { + function = "ADC13"; + groups = "ADC13"; + }; + + pinctrl_adc14_default: adc14-default-state { + function = "ADC14"; + groups = "ADC14"; + }; + + pinctrl_adc15_default: adc15-default-state { + function = "ADC15"; + groups = "ADC15"; + }; + + pinctrl_pwm0_default: pwm0-default-state { + function = "PWM0"; + groups = "PWM0"; + }; + + pinctrl_pwm1_default: pwm1-default-state { + function = "PWM1"; + groups = "PWM1"; + }; + + pinctrl_pwm2_default: pwm2-default-state { + function = "PWM2"; + groups = "PWM2"; + }; + + pinctrl_pwm3_default: pwm3-default-state { + function = "PWM3"; + groups = "PWM3"; + }; + + pinctrl_pwm4_default: pwm4-default-state { + function = "PWM4"; + groups = "PWM4"; + }; + + pinctrl_pwm5_default: pwm5-default-state { + function = "PWM5"; + groups = "PWM5"; + }; + + pinctrl_pwm6_default: pwm6-default-state { + function = "PWM6"; + groups = "PWM6"; + }; + + pinctrl_pwm7_default: pwm7-default-state { + function = "PWM7"; + groups = "PWM7"; + }; + + pinctrl_pwm8_default: pwm8-default-state { + function = "PWM8"; + groups = "PWM8"; + }; + + pinctrl_pwm9_default: pwm9-default-state { + function = "PWM9"; + groups = "PWM9"; + }; + + pinctrl_pwm10_default: pwm10-default-state { + function = "PWM10"; + groups = "PWM10"; + }; + + pinctrl_pwm11_default: pwm11-default-state { + function = "PWM11"; + groups = "PWM11"; + }; + + pinctrl_pwm12_default: pwm12-default-state { + function = "PWM12"; + groups = "PWM12"; + }; + + pinctrl_pwm13_default: pwm13-default-state { + function = "PWM13"; + groups = "PWM13"; + }; + + pinctrl_pwm14_default: pwm14-default-state { + function = "PWM14"; + groups = "PWM14"; + }; + + pinctrl_pwm15_default: pwm15-default-state { + function = "PWM15"; + groups = "PWM15"; + }; + + pinctrl_tach0_default: tach0-default-state { + function = "TACH0"; + groups = "TACH0"; + }; + + pinctrl_tach1_default: tach1-default-state { + function = "TACH1"; + groups = "TACH1"; + }; + + pinctrl_tach2_default: tach2-default-state { + function = "TACH2"; + groups = "TACH2"; + }; + + pinctrl_tach3_default: tach3-default-state { + function = "TACH3"; + groups = "TACH3"; + }; + + pinctrl_tach4_default: tach4-default-state { + function = "TACH4"; + groups = "TACH4"; + }; + + pinctrl_tach5_default: tach5-default-state { + function = "TACH5"; + groups = "TACH5"; + }; + + pinctrl_tach6_default: tach6-default-state { + function = "TACH6"; + groups = "TACH6"; + }; + + pinctrl_tach7_default: tach7-default-state { + function = "TACH7"; + groups = "TACH7"; + }; + + pinctrl_tach8_default: tach8-default-state { + function = "TACH8"; + groups = "TACH8"; + }; + + pinctrl_tach9_default: tach9-default-state { + function = "TACH9"; + groups = "TACH9"; + }; + + pinctrl_tach10_default: tach10-default-state { + function = "TACH10"; + groups = "TACH10"; + }; + + pinctrl_tach11_default: tach11-default-state { + function = "TACH11"; + groups = "TACH11"; + }; + + pinctrl_tach12_default: tach12-default-state { + function = "TACH12"; + groups = "TACH12"; + }; + + pinctrl_tach13_default: tach13-default-state { + function = "TACH13"; + groups = "TACH13"; + }; + + pinctrl_tach14_default: tach14-default-state { + function = "TACH14"; + groups = "TACH14"; + }; + + pinctrl_tach15_default: tach15-default-state { + function = "TACH15"; + groups = "TACH15"; + }; + + pinctrl_jtagm1_default: jtagm1-default-state { + function = "JTAGM1"; + groups = "JTAGM1"; + }; + + pinctrl_mdio0_default: mdio0-default-state { + function = "MDIO0"; + groups = "MDIO0"; + }; + + pinctrl_mdio1_default: mdio1-default-state { + function = "MDIO1"; + groups = "MDIO1"; + }; + + pinctrl_mdio2_default: mdio2-default-state { + function = "MDIO2"; + groups = "MDIO2"; + }; + + pinctrl_rgmii0_default: rgmii0-default-state { + function = "RGMII0"; + groups = "RGMII0"; + }; + + pinctrl_rgmii1_default: rgmii1-default-state { + function = "RGMII1"; + groups = "RGMII1"; + }; + + pinctrl_rmii0_default: rmii0-default-state { + function = "RMII0"; + groups = "RMII0"; + }; + + pinctrl_rmii0_rclko_default: rmii0-rclko-default-state { + function = "RMII0RCLKO"; + groups = "RMII0RCLKO"; + }; + + pinctrl_rmii1_default: rmii1-default-state { + function = "RMII1"; + groups = "RMII1"; + }; + + pinctrl_rmii1_rclko_default: rmii1-rclko-default-state { + function = "RMII1RCLKO"; + groups = "RMII1RCLKO"; + }; + + pinctrl_sgmii_default: sgmii-default-state { + function = "SGMII"; + groups = "SGMII"; + }; + + pinctrl_fwspi_quad_default: fwspi-quad-default-state { + function = "FWQSPI"; + groups = "FWQSPI"; + }; + + pinctrl_fsi0_default: fsi0-default-state { + function = "FSI0"; + groups = "FSI0"; + }; + + pinctrl_fsi1_default: fsi1-default-state { + function = "FSI1"; + groups = "FSI1"; + }; + + pinctrl_fsi2_default: fsi2-default-state { + function = "FSI2"; + groups = "FSI2"; + }; + + pinctrl_fsi3_default: fsi3-default-state { + function = "FSI3"; + groups = "FSI3"; + }; + + pinctrl_spi0_default: spi0-default-state { + function = "SPI0"; + groups = "SPI0"; + }; + + pinctrl_spi0_quad_default: spi0-quad-default-state { + function = "QSPI0"; + groups = "QSPI0"; + }; + + pinctrl_spi0_cs1_default: spi0-cs1-default-state { + function = "SPI0CS1"; + groups = "SPI0CS1"; + }; + + pinctrl_spi1_default: spi1-default-state { + function = "SPI1"; + groups = "SPI1"; + }; + + pinctrl_spi1_quad_default: spi1-quad-default-state { + function = "QSPI1"; + groups = "QSPI1"; + }; + + pinctrl_spi1_cs1_default: spi1-cs1-default-state { + function = "SPI1CS1"; + groups = "SPI1CS1"; + }; + + pinctrl_spi2_default: spi2-default-state { + function = "SPI2"; + groups = "SPI2"; + }; + + pinctrl_spi2_quad_default: spi2-quad-default-state { + function = "QSPI2"; + groups = "QSPI2"; + }; + + pinctrl_spi2_cs1_default: spi2-cs1-default-state { + function = "SPI2CS1"; + groups = "SPI2CS1"; + }; + + pinctrl_espi0_default: espi0-default-state { + function = "ESPI0"; + groups = "ESPI0"; + }; + + pinctrl_espi1_default: espi1-default-state { + function = "ESPI1"; + groups = "ESPI1"; + }; + + pinctrl_lpc0_default: lpc0-default-state { + function = "LPC0"; + groups = "LPC0"; + }; + + pinctrl_lpc1_default: lpc1-default-state { + function = "LPC1"; + groups = "LPC1"; + }; + + pinctrl_vpi_default: vpi-default-state { + function = "VPI"; + groups = "VPI"; + }; + + pinctrl_sd_default: sd-default-state { + function = "SD"; + groups = "SD"; + }; + + pinctrl_hvi3c0_default: hvi3c0-default-state { + function = "I3C0"; + groups = "HVI3C0"; + }; + + pinctrl_hvi3c1_default: hvi3c1-default-state { + function = "I3C1"; + groups = "HVI3C1"; + }; + + pinctrl_hvi3c2_default: hvi3c2-default-state { + function = "I3C2"; + groups = "HVI3C2"; + }; + + pinctrl_hvi3c3_default: hvi3c3-default-state { + function = "I3C3"; + groups = "HVI3C3"; + }; + + pinctrl_i3c4_default: i3c4-default-state { + function = "I3C4"; + groups = "I3C4"; + }; + + pinctrl_i3c5_default: i3c5-default-state { + function = "I3C5"; + groups = "I3C5"; + }; + + pinctrl_i3c6_default: i3c6-default-state { + function = "I3C6"; + groups = "I3C6"; + }; + + pinctrl_i3c7_default: i3c7-default-state { + function = "I3C7"; + groups = "I3C7"; + }; + + pinctrl_i3c8_default: i3c8-default-state { + function = "I3C8"; + groups = "I3C8"; + }; + + pinctrl_i3c9_default: i3c9-default-state { + function = "I3C9"; + groups = "I3C9"; + }; + + pinctrl_i3c10_default: i3c10-default-state { + function = "I3C10"; + groups = "I3C10"; + }; + + pinctrl_i3c11_default: i3c11-default-state { + function = "I3C11"; + groups = "I3C11"; + }; + + pinctrl_hvi3c12_default: hvi3c12-default-state { + function = "I3C12"; + groups = "HVI3C12"; + }; + + pinctrl_hvi3c13_default: hvi3c13-default-state { + function = "I3C13"; + groups = "HVI3C13"; + }; + + pinctrl_hvi3c14_default: hvi3c14-default-state { + function = "I3C14"; + groups = "HVI3C14"; + }; + + pinctrl_hvi3c15_default: hvi3c15-default-state { + function = "I3C15"; + groups = "HVI3C15"; + }; + pinctrl_thru0_default: thru0-default-state { + function = "THRU0"; + groups = "THRU0"; + }; + + pinctrl_thru1_default: thru1-default-state { + function = "THRU1"; + groups = "THRU1"; + }; + + pinctrl_thru2_default: thru2-default-state { + function = "THRU2"; + groups = "THRU2"; + }; + + pinctrl_thru3_default: thru3-default-state { + function = "THRU3"; + groups = "THRU3"; + }; + + pinctrl_ncts5_default: ncts5-default-state { + function = "NCTS5"; + groups = "NCTS5"; + }; + + pinctrl_ndcd5_default: ndcd5-default-state { + function = "NDCD5"; + groups = "NDCD5"; + }; + + pinctrl_ndsr5_default: ndsr5-default-state { + function = "NDSR5"; + groups = "NDSR5"; + }; + + pinctrl_nri5_default: nri5-default-state { + function = "NRI5"; + groups = "NRI5"; + }; + + pinctrl_i2c0_default: i2c0-default-state { + function = "I2C0"; + groups = "I2C0"; + }; + + pinctrl_i2c1_default: i2c1-default-state { + function = "I2C1"; + groups = "I2C1"; + }; + + pinctrl_i2c2_default: i2c2-default-state { + function = "I2C2"; + groups = "I2C2"; + }; + + pinctrl_i2c3_default: i2c3-default-state { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_i2c4_default: i2c4-default-state { + function = "I2C4"; + groups = "I2C4"; + }; + + pinctrl_i2c5_default: i2c5-default-state { + function = "I2C5"; + groups = "I2C5"; + }; + + pinctrl_i2c6_default: i2c6-default-state { + function = "I2C6"; + groups = "I2C6"; + }; + + pinctrl_i2c7_default: i2c7-default-state { + function = "I2C7"; + groups = "I2C7"; + }; + + pinctrl_i2c8_default: i2c8-default-state { + function = "I2C8"; + groups = "I2C8"; + }; + + pinctrl_i2c9_default: i2c9-default-state { + function = "I2C9"; + groups = "I2C9"; + }; + + pinctrl_i2c10_default: i2c10-default-state { + function = "I2C10"; + groups = "I2C10"; + }; + + pinctrl_i2c11_default: i2c11-default-state { + function = "I2C11"; + groups = "I2C11"; + }; + + pinctrl_i2c12_default: i2c12-default-state { + function = "I2C12"; + groups = "I2C12"; + }; + + pinctrl_i2c13_default: i2c13-default-state { + function = "I2C13"; + groups = "I2C13"; + }; + + pinctrl_i2c14_default: i2c14-default-state { + function = "I2C14"; + groups = "I2C14"; + }; + + pinctrl_i2c15_default: i2c15-default-state { + function = "I2C15"; + groups = "I2C15"; + }; + + pinctrl_salt0_default: salt0-default-state { + function = "SALT0"; + groups = "SALT0"; + }; + + pinctrl_salt1_default: salt1-default-state { + function = "SALT1"; + groups = "SALT1"; + }; + + pinctrl_salt2_default: salt2-default-state { + function = "SALT2"; + groups = "SALT2"; + }; + + pinctrl_salt3_default: salt3-default-state { + function = "SALT3"; + groups = "SALT3"; + }; + + pinctrl_salt4_default: salt4-default-state { + function = "SALT4"; + groups = "SALT4"; + }; + + pinctrl_salt5_default: salt5-default-state { + function = "SALT5"; + groups = "SALT5"; + }; + + pinctrl_salt6_default: salt6-default-state { + function = "SALT6"; + groups = "SALT6"; + }; + + pinctrl_salt7_default: salt7-default-state { + function = "SALT7"; + groups = "SALT7"; + }; + + pinctrl_salt8_default: salt8-default-state { + function = "SALT8"; + groups = "SALT8"; + }; + + pinctrl_salt9_default: salt9-default-state { + function = "SALT9"; + groups = "SALT9"; + }; + + pinctrl_salt10_default: salt10-default-state { + function = "SALT10"; + groups = "SALT10"; + }; + + pinctrl_salt11_default: salt11-default-state { + function = "SALT11"; + groups = "SALT11"; + }; + + pinctrl_salt12_default: salt12-default-state { + function = "SALT12"; + groups = "SALT12"; + }; + + pinctrl_salt13_default: salt13-default-state { + function = "SALT13"; + groups = "SALT13"; + }; + + pinctrl_salt14_default: salt14-default-state { + function = "SALT14"; + groups = "SALT14"; + }; + + pinctrl_salt15_default: salt15-default-state { + function = "SALT15"; + groups = "SALT15"; + }; + + pinctrl_ltpipsi2c0_default: ltpipsi2c0-default-state { + function = "I2C0"; + groups = "LTPI_PS_I2C0"; + }; + + pinctrl_ltpipsi2c1_default: ltpipsi2c1-default-state { + function = "I2C1"; + groups = "LTPI_PS_I2C1"; + }; + + pinctrl_ltpipsi2c2_default: ltpipsi2c2-default-state { + function = "I2C2"; + groups = "LTPI_PS_I2C2"; + }; + + pinctrl_ltpipsi2c3_default: ltpipsi2c3-default-state { + function = "I2C3"; + groups = "LTPI_PS_I2C3"; + }; + + pinctrl_can_default: can-default-state { + function = "CANBUS"; + groups = "CANBUS"; + }; + + pinctrl_di2c0_default: di2c0-default-state { + function = "I2C0"; + groups = "DI2C0"; + }; + + pinctrl_di2c1_default: di2c1-default-state { + function = "I2C1"; + groups = "DI2C1"; + }; + + pinctrl_di2c2_default: di2c2-default-state { + function = "I2C2"; + groups = "DI2C2"; + }; + + pinctrl_di2c3_default: di2c3-default-state { + function = "I2C3"; + groups = "DI2C3"; + }; + pinctrl_di2c8_default: di2c8-default-state { + function = "I2C8"; + groups = "DI2C8"; + }; + + pinctrl_di2c9_default: di2c9-default-state { + function = "I2C9"; + groups = "DI2C9"; + }; + + pinctrl_di2c10_default: di2c10-default-state { + function = "I2C10"; + groups = "DI2C10"; + }; + + pinctrl_di2c11_default: di2c11-default-state { + function = "I2C11"; + groups = "DI2C11"; + }; + + pinctrl_di2c12_default: di2c12-default-state { + function = "I2C12"; + groups = "DI2C12"; + }; + + pinctrl_di2c13_default: di2c13-default-state { + function = "I2C13"; + groups = "DI2C13"; + }; + + pinctrl_di2c14_default: di2c14-default-state { + function = "I2C14"; + groups = "DI2C14"; + }; + + pinctrl_di2c15_default: di2c15-default-state { + function = "I2C15"; + groups = "DI2C15"; + }; + + pinctrl_ncts0_default: ncts0-default-state { + function = "NCTS0"; + groups = "NCTS0"; + }; + + pinctrl_ndcd0_default: ndcd0-default-state { + function = "NDCD0"; + groups = "NDCD0"; + }; + + pinctrl_ndsr0_default: ndsr0-default-state { + function = "NDSR0"; + groups = "NDSR0"; + }; + + pinctrl_nri0_default: nri0-default-state { + function = "NRI0"; + groups = "NRI0"; + }; + + pinctrl_ndtr0_default: ndtr0-default-state { + function = "NDTR0"; + groups = "NDTR0"; + }; + + pinctrl_nrts0_default: nrts0-default-state { + function = "NRTS0"; + groups = "NRTS0"; + }; + + pinctrl_uart0_default: uart0-default-state { + function = "UART0"; + groups = "UART0"; + }; + + pinctrl_ncts1_default: ncts1-default-state { + function = "NCTS1"; + groups = "NCTS1"; + }; + + pinctrl_ndcd1_default: ndcd1-default-state { + function = "NDCD1"; + groups = "NDCD1"; + }; + + pinctrl_ndsr1_default: ndsr1-default-state { + function = "NDSR1"; + groups = "NDSR1"; + }; + + pinctrl_nri1_default: nri1-default-state { + function = "NRI1"; + groups = "NRI1"; + }; + + pinctrl_ndtr1_default: ndtr1-default-state { + function = "NDTR1"; + groups = "NDTR1"; + }; + + pinctrl_nrts1_default: nrts1-default-state { + function = "NRTS1"; + groups = "NRTS1"; + }; + + pinctrl_uart1_default: uart1-default-state { + function = "UART1"; + groups = "UART1"; + }; + + pinctrl_uart2_default: uart2-default-state { + function = "UART2"; + groups = "UART2"; + }; + + pinctrl_uart3_default: uart3-default-state { + function = "UART3"; + groups = "UART3"; + }; + pinctrl_ndtr5_default: ndtr5-default-state { + function = "NDTR5"; + groups = "NDTR5"; + }; + + pinctrl_nrts5_default: nrts5-default-state { + function = "NRTS5"; + groups = "NRTS5"; + }; + + pinctrl_uart5_default: uart5-default-state { + function = "UART5"; + groups = "UART5"; + }; + + pinctrl_ncts6_default: ncts6-default-state { + function = "NCTS6"; + groups = "NCTS6"; + }; + + pinctrl_ndcd6_default: ndcd6-default-state { + function = "NDCD6"; + groups = "NDCD6"; + }; + + pinctrl_ndsr6_default: ndsr6-default-state { + function = "NDSR6"; + groups = "NDSR6"; + }; + + pinctrl_nri6_default: nri6-default-state { + function = "NRI6"; + groups = "NRI6"; + }; + + pinctrl_ndtr6_default: ndtr6-default-state { + function = "NDTR6"; + groups = "NDTR6"; + }; + + pinctrl_nrts6_default: nrts6-default-state { + function = "NRTS6"; + groups = "NRTS6"; + }; + + pinctrl_uart6_default: uart6-default-state { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_uart7_default: uart7-default-state { + function = "UART7"; + groups = "UART7"; + }; + + pinctrl_uart8_default: uart8-default-state { + function = "UART8"; + groups = "UART8"; + }; + + pinctrl_uart9_default: uart9-default-state { + function = "UART9"; + groups = "UART9"; + }; + + pinctrl_uart10_default: uart10-default-state { + function = "UART10"; + groups = "UART10"; + }; + + pinctrl_uart11_default: uart11-default-state { + function = "UART11"; + groups = "UART11"; + }; + + pinctrl_pcierc2_perst_default: pcierc2-perst-default-state { + function = "PCIERC"; + groups = "PE2SGRSTN"; + }; + + pinctrl_usb2cud_default: usb2cud-default-state { + function = "USB2C"; + groups = "USB2CUD"; + }; + + pinctrl_usb2cd_default: usb2cd-default-state { + function = "USB2C"; + groups = "USB2CD"; + }; + + pinctrl_usb2ch_default: usb2ch-default-state { + function = "USB2C"; + groups = "USB2CH"; + }; + + pinctrl_usb2cu_default: usb2cu-default-state { + function = "USB2C"; + groups = "USB2CU"; + }; + + pinctrl_usb2dd_default: usb2dd-default-state { + function = "USB2D"; + groups = "USB2DD"; + }; + + pinctrl_usb2dh_default: usb2dh-default-state { + function = "USB2D"; + groups = "USB2DH"; + }; + + pinctrl_wdtrst0n_default: wdtrst0n-default-state { + function = "WDTRST0N"; + groups = "WDTRST0N"; + }; + + pinctrl_wdtrst1n_default: wdtrst1n-default-state { + function = "WDTRST1N"; + groups = "WDTRST1N"; + }; + + pinctrl_wdtrst2n_default: wdtrst2n-default-state { + function = "WDTRST2N"; + groups = "WDTRST2N"; + }; + + pinctrl_wdtrst3n_default: wdtrst3n-default-state { + function = "WDTRST3N"; + groups = "WDTRST3N"; + }; + + pinctrl_wdtrst4n_default: wdtrst4n-default-state { + function = "WDTRST4N"; + groups = "WDTRST4N"; + }; + + pinctrl_wdtrst5n_default: wdtrst5n-default-state { + function = "WDTRST5N"; + groups = "WDTRST5N"; + }; + + pinctrl_wdtrst6n_default: wdtrst6n-default-state { + function = "WDTRST6N"; + groups = "WDTRST6N"; + }; + + pinctrl_wdtrst7n_default: wdtrst7n-default-state { + function = "WDTRST7N"; + groups = "WDTRST7N"; + }; +}; diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7-soc1.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7-soc1.dtsi new file mode 100644 index 0000000..bc990f7 --- /dev/null +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7-soc1.dtsi @@ -0,0 +1,557 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree Source for AST27xx SoC Family Main Domain peripherals + * + * Copyright (C) 2026 ASPEED Technology Inc. + */ + +#include +#include +#include + +&soc1 { + fmc: spi@14000000 { + reg = <0x0 0x14000000 0x0 0xc4>, <0x1 0x00000000 0x0 0x80000000>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2700-fmc"; + status = "disabled"; + clocks = <&syscon1 SCU1_CLK_AHB>; + interrupts-extended = <&intc1 121>; + num-cs = <3>; + + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + status = "disabled"; + }; + + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + status = "disabled"; + }; + + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + status = "disabled"; + }; + }; + + spi0: spi@14010000 { + reg = <0x0 0x14010000 0x0 0xc4>, <0x1 0x80000000 0x0 0x80000000>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2700-spi"; + clocks = <&syscon1 SCU1_CLK_AHB>; + interrupts-extended = <&intc1 122>; + status = "disabled"; + num-cs = <2>; + + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + status = "disabled"; + }; + + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + status = "disabled"; + }; + }; + + spi1: spi@14020000 { + reg = <0x0 0x14020000 0x0 0xc4>, <0x2 0x00000000 0x0 0x80000000>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2700-spi"; + clocks = <&syscon1 SCU1_CLK_AHB>; + interrupts-extended = <&intc1 123>; + status = "disabled"; + num-cs = <2>; + + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + status = "disabled"; + }; + + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + status = "disabled"; + }; + }; + + spi2: spi@14030000 { + reg = <0x0 0x14030000 0x0 0x1f0>, <0x2 0x80000000 0x0 0x80000000>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2700-spi"; + clocks = <&syscon1 SCU1_CLK_AHB>; + resets = <&syscon1 SCU1_RESET_SPI2>; + interrupts-extended = <&intc1 124>; + num-cs = <2>; + status = "disabled"; + }; + + mdio0: mdio@14040000 { + compatible = "aspeed,ast2700-mdio", "aspeed,ast2600-mdio"; + reg = <0 0x14040000 0 0x8>; + resets = <&syscon1 SCU1_RESET_MII>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio0_default>; + status = "disabled"; + }; + + mdio1: mdio@14040008 { + compatible = "aspeed,ast2700-mdio", "aspeed,ast2600-mdio"; + reg = <0 0x14040008 0 0x8>; + resets = <&syscon1 SCU1_RESET_MII>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio1_default>; + status = "disabled"; + }; + + mdio2: mdio@14040010 { + compatible = "aspeed,ast2700-mdio", "aspeed,ast2600-mdio"; + reg = <0 0x14040010 0 0x8>; + resets = <&syscon1 SCU1_RESET_MII>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio2_default>; + status = "disabled"; + }; + + sdio_controller: sdc@14080000 { + compatible = "aspeed,ast2700-sd-controller", "aspeed,ast2600-sd-controller"; + reg = <0 0x14080000 0 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x14080000 0x10000>; + clocks = <&syscon1 SCU1_CLK_GATE_SDCLK>; + resets = <&syscon1 SCU1_RESET_SD>; + status = "disabled"; + + sdhci: sdhci@100 { + compatible = "aspeed,ast2700-sdhci", "aspeed,ast2600-sdhci"; + reg = <0x100 0x100>; + sdhci,auto-cmd12; + interrupts-extended = <&intc1 161>; + clocks = <&syscon1 SCU1_CLK_GATE_SDCLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd_default>; + status = "disabled"; + }; + }; + + pwm_tach: pwm-tach-controller@140c0000 { + compatible = "aspeed,ast2700-pwm-tach", "aspeed,ast2600-pwm-tach"; + reg = <0x0 0x140c0000 0 0x100>; + clocks = <&syscon1 SCU1_CLK_AHB>; + resets = <&syscon1 SCU1_RESET_PWM>; + #pwm-cells = <3>; + status = "disabled"; + }; + + uhci1: usb@14110000 { + compatible = "aspeed,ast2700-uhci", "generic-uhci"; + reg = <0x0 0x14110000 0x0 0x100>; + interrupts-extended = <&intc1 155>; + #ports = <2>; + clocks = <&syscon1 SCU1_CLK_GATE_UHCICLK>; + resets = <&syscon1 SCU1_RESET_UHCI>; + status = "disabled"; + }; + + vhubc: usb-vhub@14120000 { + compatible = "aspeed,ast2700-usb-vhub"; + reg = <0x0 0x14120000 0x0 0x820>; + interrupts-extended = <&intc1 156>; + clocks = <&syscon1 SCU1_CLK_GATE_PORTCUSB2CLK>; + resets = <&syscon1 SCU1_RESET_PORTC_VHUB_EHCI>; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2cd_default>; + status = "disabled"; + }; + + ehci2: usb@14121000 { + compatible = "aspeed,ast2700-ehci", "generic-ehci"; + reg = <0x0 0x14121000 0x0 0x100>; + interrupts-extended = <&intc1 156>; + clocks = <&syscon1 SCU1_CLK_GATE_PORTCUSB2CLK>; + resets = <&syscon1 SCU1_RESET_PORTC_VHUB_EHCI>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ch_default>; + status = "disabled"; + }; + + vhubd: usb-vhub@14122000 { + compatible = "aspeed,ast2700-usb-vhub"; + reg = <0x0 0x14122000 0x0 0x820>; + interrupts-extended = <&intc1 157>; + clocks = <&syscon1 SCU1_CLK_GATE_PORTDUSB2CLK>; + resets = <&syscon1 SCU1_RESET_PORTD_VHUB_EHCI>; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2dd_default>; + status = "disabled"; + }; + + ehci3: usb@14123000 { + compatible = "aspeed,ast2700-ehci", "generic-ehci"; + reg = <0x0 0x14123000 0x0 0x100>; + interrupts-extended = <&intc1 157>; + clocks = <&syscon1 SCU1_CLK_GATE_PORTDUSB2CLK>; + resets = <&syscon1 SCU1_RESET_PORTD_VHUB_EHCI>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2dh_default>; + status = "disabled"; + }; + + sram1: sram@14b80000 { + compatible = "mmio-sram"; + reg = <0x0 0x14b80000 0x0 0x40000>; + ranges = <0x0 0x0 0x14b80000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + + soc1-sram@0 { + reg = <0x0 0x40000>; + export; + }; + }; + + adc0: adc@14c00000 { + compatible = "aspeed,ast2700-adc0"; + reg = <0x0 0x14c00000 0 0x100>; + clocks = <&syscon1 SCU1_CLK_AHB>; + resets = <&syscon1 SCU1_RESET_ADC>; + interrupts-extended = <&intc1 80>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + adc1: adc@14c00100 { + compatible = "aspeed,ast2700-adc1"; + reg = <0x0 0x14c00100 0x0 0x100>; + clocks = <&syscon1 SCU1_CLK_AHB>; + resets = <&syscon1 SCU1_RESET_ADC>; + interrupts-extended = <&intc1 80>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + syscon1: syscon@14c02000 { + compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd"; + reg = <0x0 0x14c02000 0x0 0x1000>; + ranges = <0x0 0x0 0x14c02000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + + scu_ic2: interrupt-controller@100 { + compatible = "aspeed,ast2700-scu-ic2"; + reg = <0x100 0x8>; + interrupts-extended = <&intc1 160>; + #interrupt-cells = <1>; + interrupt-controller; + }; + + scu_ic3: interrupt-controller@108 { + compatible = "aspeed,ast2700-scu-ic3"; + reg = <0x108 0x8>; + interrupts-extended = <&intc1 186>; + #interrupt-cells = <1>; + interrupt-controller; + }; + + pinctrl1: pinctrl@400 { + compatible = "aspeed,ast2700-soc1-pinctrl"; + reg = <0x400 0x2a0>; + }; + }; + + gpio1: gpio@14c0b000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2700-gpio"; + reg = <0x0 0x14c0b000 0x0 0x1000>; + interrupts-extended = <&intc1 82>; + gpio-ranges = <&pinctrl1 0 0 216>; + ngpios = <216>; + clocks = <&syscon1 SCU1_CLK_AHB>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sgpiom0: sgpiom@14c0c000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2700-sgpiom"; + reg = <0x0 0x14c0c000 0x0 0x100>; + interrupts-extended = <&intc1 85>; + ngpios = <256>; + clocks = <&syscon1 SCU1_CLK_APB>; + interrupt-controller; + #interrupt-cells = <2>; + bus-frequency = <12000000>; + status = "disabled"; + }; + + sgpiom1: sgpiom@14c0d000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2700-sgpiom"; + reg = <0x0 0x14c0d000 0x0 0x100>; + interrupts-extended = <&intc1 88>; + ngpios = <256>; + clocks = <&syscon1 SCU1_CLK_APB>; + interrupt-controller; + #interrupt-cells = <2>; + bus-frequency = <12000000>; + status = "disabled"; + }; + + intc1: interrupt-controller@14c18000 { + compatible = "aspeed,ast2700-intc1"; + reg = <0 0x14c18000 0 0x400>; + interrupt-controller; + interrupt-parent = <&intc0>; + #interrupt-cells = <1>; + aspeed,interrupt-ranges = + <0 6 &intc0 480>, /* M0 ~ M5 */ + <10 6 &intc0 490>, /* M10 ~ M15 */ + <20 6 &intc0 500>, /* M20 ~ M25 */ + <30 6 &intc0 510>, /* M30 ~ M35 */ + <40 6 &intc0 520>, /* M40 ~ M45 */ + <50 1 &bootmcu_hlic 11>; /* only 1 pin to BootMCU */ + }; + + uart0: serial@14c33000 { + compatible = "ns16550a"; + reg = <0x0 0x14c33000 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART0CLK>; + interrupts-extended = <&intc1 135>; + no-loopback-test; + status = "disabled"; + }; + + uart1: serial@14c33100 { + compatible = "ns16550a"; + reg = <0x0 0x14c33100 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART1CLK>; + interrupts-extended = <&intc1 136>; + no-loopback-test; + status = "disabled"; + }; + + uart2: serial@14c33200 { + compatible = "ns16550a"; + reg = <0x0 0x14c33200 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART2CLK>; + interrupts-extended = <&intc1 137>; + no-loopback-test; + status = "disabled"; + }; + + uart3: serial@14c33300 { + compatible = "ns16550a"; + reg = <0x0 0x14c33300 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART3CLK>; + interrupts-extended = <&intc1 138>; + no-loopback-test; + status = "disabled"; + }; + + uart5: serial@14c33400 { + compatible = "ns16550a"; + reg = <0x0 0x14c33400 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART5CLK>; + interrupts-extended = <&intc1 139>; + no-loopback-test; + status = "disabled"; + }; + + uart6: serial@14c33500 { + compatible = "ns16550a"; + reg = <0x0 0x14c33500 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART6CLK>; + interrupts-extended = <&intc1 140>; + no-loopback-test; + status = "disabled"; + }; + + uart7: serial@14c33600 { + compatible = "ns16550a"; + reg = <0x0 0x14c33600 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART7CLK>; + interrupts-extended = <&intc1 141>; + no-loopback-test; + status = "disabled"; + }; + + uart8: serial@14c33700 { + compatible = "ns16550a"; + reg = <0x0 0x14c33700 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART8CLK>; + interrupts-extended = <&intc1 142>; + no-loopback-test; + status = "disabled"; + }; + + uart9: serial@14c33800 { + compatible = "ns16550a"; + reg = <0x0 0x14c33800 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART9CLK>; + interrupts-extended = <&intc1 143>; + no-loopback-test; + status = "disabled"; + }; + + uart10: serial@14c33900 { + compatible = "ns16550a"; + reg = <0x0 0x14c33900 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART10CLK>; + interrupts-extended = <&intc1 144>; + no-loopback-test; + status = "disabled"; + }; + + uart11: serial@14c33a00 { + compatible = "ns16550a"; + reg = <0x0 0x14c33a00 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART11CLK>; + interrupts-extended = <&intc1 145>; + no-loopback-test; + status = "disabled"; + }; + + uart12: serial@14c33b00 { + compatible = "ns16550a"; + reg = <0x0 0x14c33b00 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_GATE_UART12CLK>; + interrupts-extended = <&intc1 146>; + no-loopback-test; + status = "disabled"; + }; + + uart13: serial@14c33c00 { + compatible = "ns16550a"; + reg = <0x0 0x14c33c00 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_UART13>; + interrupts-extended = <&intc1 23>; + no-loopback-test; + status = "disabled"; + }; + + uart14: serial@14c33d00 { + compatible = "ns16550a"; + reg = <0x0 0x14c33d00 0x0 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&syscon1 SCU1_CLK_UART14>; + interrupts-extended = <&intc1 55>; + no-loopback-test; + status = "disabled"; + }; + + wdt0: watchdog@14c37000 { + compatible = "aspeed,ast2700-wdt"; + reg = <0x0 0x14c37000 0x0 0x80>; + }; + + wdt1: watchdog@14c37080 { + compatible = "aspeed,ast2700-wdt"; + reg = <0x0 0x14c37080 0x0 0x80>; + }; + + wdt2: watchdog@14c37100 { + compatible = "aspeed,ast2700-wdt"; + reg = <0x0 0x14c37100 0x0 0x80>; + status = "disabled"; + }; + + wdt3: watchdog@14c37180 { + compatible = "aspeed,ast2700-wdt"; + reg = <0x0 0x14c37180 0x0 0x80>; + status = "disabled"; + }; + + mbox2: mbox@14c39200 { + compatible = "aspeed,ast2700-mailbox"; + reg = <0x0 0x14c39200 0x0 0x100>, <0x0 0x14c39300 0x0 0x100>; + reg-names = "tx", "rx"; + interrupts-extended = <&intc1 177>; + #mbox-cells = <1>; + }; + + fsim0: fsi@21800000 { + compatible = "aspeed,ast2700-fsi-master"; + reg = <0x0 0x21800000 0x0 0x94>; + interrupts-extended = <&intc1 166>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi0_default>; + clocks = <&syscon1 SCU1_CLK_GATE_FSICLK>; + resets = <&syscon1 SCU1_RESET_FSI>; + status = "disabled"; + }; + + fsim1: fsi@23800000 { + compatible = "aspeed,ast2700-fsi-master"; + reg = <0x0 0x23800000 0x0 0x94>; + interrupts-extended = <&intc1 167>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi2_default>; + clocks = <&syscon1 SCU1_CLK_GATE_FSICLK>; + resets = <&syscon1 SCU1_RESET_FSI>; + status = "disabled"; + }; +}; + +#include "aspeed-g7-soc1-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/aspeed/ast2700-evb.dts b/arch/arm64/boot/dts/aspeed/ast2700-evb.dts new file mode 100644 index 0000000..fe8f0b8 --- /dev/null +++ b/arch/arm64/boot/dts/aspeed/ast2700-evb.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree Source AST2700 EVB + * + * Copyright (C) 2026 ASPEED Technology Inc. + */ + +/dts-v1/; +#include "aspeed-g7-a35.dtsi" + +/ { + model = "AST2700 EVB"; + compatible = "aspeed,ast2700-evb", "aspeed,ast2700"; + + aliases { + serial0 = &uart12; /* console port */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@400000000 { + device_type = "memory"; + reg = <0x4 0x00000000 0x0 0x40000000>; + }; +}; + +&fmc { + status = "okay"; + pinctrl-0 = <&pinctrl_fwspi_quad_default>; + pinctrl-names = "default"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; +#include "aspeed-evb-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "fmc0:1"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + + flash@2 { + status = "disabled"; + m25p,fast-read; + label = "fmc0:2"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&uart12 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts b/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts index 5eb9ef3..178ad4b 100644 --- a/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts +++ b/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts @@ -17,6 +17,25 @@ <0x8 0xc0000000 0x1 0x0>, <0xc 0x00000000 0x0 0x40000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mmc0_reserved: mmc0-reserved@5160000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x5160000 0x0 0x10000>; + no-map; + }; + }; +}; + +&mmc0 { + bus-width = <8>; + memory-region = <&mmc0_reserved>; + non-removable; + status = "okay"; }; &uart0 { diff --git a/arch/arm64/boot/dts/bst/bstc1200.dtsi b/arch/arm64/boot/dts/bst/bstc1200.dtsi index dd13c6b..9660d83 100644 --- a/arch/arm64/boot/dts/bst/bstc1200.dtsi +++ b/arch/arm64/boot/dts/bst/bstc1200.dtsi @@ -7,6 +7,12 @@ #address-cells = <2>; #size-cells = <2>; + clk_mmc: clock-4000000 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <4000000>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -72,6 +78,18 @@ status = "disabled"; }; + mmc0: mmc@22200000 { + compatible = "bst,c1200-sdhci"; + reg = <0x0 0x22200000 0x0 0x1000>, + <0x0 0x23006000 0x0 0x1000>; + clocks = <&clk_mmc>; + clock-names = "core"; + dma-coherent; + interrupts = ; + max-frequency = <200000000>; + status = "disabled"; + }; + gic: interrupt-controller@32800000 { compatible = "arm,gic-v3"; reg = <0x0 0x32800000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/cix/sky1-power.h b/arch/arm64/boot/dts/cix/sky1-power.h index 53f4a3a..1445675 100644 --- a/arch/arm64/boot/dts/cix/sky1-power.h +++ b/arch/arm64/boot/dts/cix/sky1-power.h @@ -30,4 +30,17 @@ #define SKY1_PD_ISP0 20 #define SKY1_PD_GPU 21 +#define SKY1_PERF_GPU_CORE 0 +#define SKY1_PERF_GPU_TOP 1 +#define SKY1_PERF_CPU_L 2 +#define SKY1_PERF_CPU_B0 3 +#define SKY1_PERF_CPU_B1 4 +#define SKY1_PERF_CPU_M0 5 +#define SKY1_PERF_CPU_M1 6 +#define SKY1_PERF_DSU 7 +#define SKY1_PERF_NPU 8 +#define SKY1_PERF_VPU 9 +#define SKY1_PERF_CI700 10 +#define SKY1_PERF_NI700 11 + #endif diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi index bb5cfb1..a77c522 100644 --- a/arch/arm64/boot/dts/cix/sky1.dtsi +++ b/arch/arm64/boot/dts/cix/sky1.dtsi @@ -22,7 +22,10 @@ enable-method = "psci"; reg = <0x0 0x0>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_L>; + power-domain-names = "perf"; capacity-dmips-mhz = <403>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; cpu1: cpu@100 { @@ -30,7 +33,10 @@ enable-method = "psci"; reg = <0x0 0x100>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_L>; + power-domain-names = "perf"; capacity-dmips-mhz = <403>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; cpu2: cpu@200 { @@ -38,7 +44,10 @@ enable-method = "psci"; reg = <0x0 0x200>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_L>; + power-domain-names = "perf"; capacity-dmips-mhz = <403>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; cpu3: cpu@300 { @@ -46,7 +55,10 @@ enable-method = "psci"; reg = <0x0 0x300>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_L>; + power-domain-names = "perf"; capacity-dmips-mhz = <403>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; cpu4: cpu@400 { @@ -54,7 +66,10 @@ enable-method = "psci"; reg = <0x0 0x400>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_M0>; + power-domain-names = "perf"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>; }; cpu5: cpu@500 { @@ -62,7 +77,10 @@ enable-method = "psci"; reg = <0x0 0x500>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_M0>; + power-domain-names = "perf"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>; }; cpu6: cpu@600 { @@ -70,7 +88,10 @@ enable-method = "psci"; reg = <0x0 0x600>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_M1>; + power-domain-names = "perf"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>; }; cpu7: cpu@700 { @@ -78,7 +99,10 @@ enable-method = "psci"; reg = <0x0 0x700>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_M1>; + power-domain-names = "perf"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>; }; cpu8: cpu@800 { @@ -86,7 +110,10 @@ enable-method = "psci"; reg = <0x0 0x800>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_B0>; + power-domain-names = "perf"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>; }; cpu9: cpu@900 { @@ -94,7 +121,10 @@ enable-method = "psci"; reg = <0x0 0x900>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_B0>; + power-domain-names = "perf"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>; }; cpu10: cpu@a00 { @@ -102,7 +132,10 @@ enable-method = "psci"; reg = <0x0 0xa00>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_B1>; + power-domain-names = "perf"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>; }; cpu11: cpu@b00 { @@ -110,7 +143,10 @@ enable-method = "psci"; reg = <0x0 0xb00>; device_type = "cpu"; + power-domains = <&scmi_dvfs SKY1_PERF_CPU_B1>; + power-domain-names = "perf"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_0>; }; cpu-map { @@ -153,6 +189,35 @@ }; }; }; + + idle-states { + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <34>; + exit-latency-us = <100>; + min-residency-us = <3000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <31>; + exit-latency-us = <79>; + min-residency-us = <3000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + local-timer-stop; + entry-latency-us = <41>; + exit-latency-us = <104>; + min-residency-us = <4000>; + }; + }; }; firmware { @@ -164,6 +229,11 @@ #address-cells = <1>; #size-cells = <0>; + scmi_dvfs: protocol@13 { + reg = <0x13>; + #power-domain-cells = <1>; + }; + scmi_clk: protocol@14 { reg = <0x14>; #clock-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/axis/artpec9.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec9.dtsi index f8ed43c..cd46aaf 100644 --- a/arch/arm64/boot/dts/exynos/axis/artpec9.dtsi +++ b/arch/arm64/boot/dts/exynos/axis/artpec9.dtsi @@ -272,6 +272,7 @@ interrupts = , , , - ; + , + ; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos2200.dtsi b/arch/arm64/boot/dts/exynos/exynos2200.dtsi index 6487ccb..59662f9 100644 --- a/arch/arm64/boot/dts/exynos/exynos2200.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos2200.dtsi @@ -1911,7 +1911,8 @@ interrupts = , , , - ; + , + ; /* * Non-updatable, broken stock Samsung bootloader does not * configure CNTFRQ_EL0 diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index cb55015..3881f57 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -215,6 +215,13 @@ compatible = "samsung,exynos850-pmu", "syscon"; reg = <0x11860000 0x10000>; + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + offset = <0x30c>; /* PS_HOLD_CONTROL */ + mask = <0x00000100>; + value = <0x0>; + }; + reboot: syscon-reboot { compatible = "syscon-reboot"; regmap = <&pmu_system_controller>; diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi index f8e2a31..2e6fb24 100644 --- a/arch/arm64/boot/dts/exynos/exynos990.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi @@ -405,7 +405,8 @@ interrupts = , , , - ; + , + ; /* * Non-updatable, broken stock Samsung bootloader does not diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index 66628cb..2c34a2b 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -148,7 +148,8 @@ interrupts = , , , - ; + , + ; }; fixed-rate-clocks { diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts index a397f06..5873720 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts +++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts @@ -83,6 +83,14 @@ status = "okay"; }; +&ufs_0 { + status = "okay"; +}; + +&ufs_0_phy { + status = "okay"; +}; + &xtcxo { clock-frequency = <38400000>; }; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi index 0bf7c4c..f1f5efc 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi @@ -1426,6 +1426,12 @@ "ethernet"; }; + syscon_hsi2: syscon@16c00000 { + compatible = "samsung,exynosautov920-hsi2-sysreg", + "syscon"; + reg = <0x16c00000 0x800>; + }; + pinctrl_hsi2: pinctrl@16c10000 { compatible = "samsung,exynosautov920-pinctrl"; reg = <0x16c10000 0x10000>; @@ -1438,6 +1444,27 @@ interrupts = ; }; + ufs_0: ufs@16e00000 { + compatible = "samsung,exynosautov920-ufs"; + reg = <0x16e00000 0x100>, + <0x16e01100 0x400>, + <0x16e80000 0x8000>, + <0x16d08000 0x800>; + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = ; + clocks = <&cmu_hsi2 CLK_MOUT_HSI2_UFS_EMBD_USER>, + <&cmu_hsi2 CLK_MOUT_HSI2_NOC_UFS_USER>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_0_phy>; + phy-names = "ufs-phy"; + samsung,sysreg = <&syscon_hsi2 0x710>; + dma-coherent; + status = "disabled"; + }; + ufs_0_phy: phy@16e04000 { compatible = "samsung,exynosautov920-ufs-phy"; reg = <0x16e04000 0x4000>; diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index d085f9f..86933f2 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -1856,7 +1856,8 @@ , , , - ; + , + ; }; }; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 711e36c..8ddaab1 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -51,6 +51,8 @@ DTC_FLAGS_fsl-lx2160a-bluebox3-rev-a := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb DTC_FLAGS_fsl-lx2160a-clearfog-cx := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb +DTC_FLAGS_fsl-lx2160a-half-twins := -Wno-interrupt_map +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-half-twins.dtb DTC_FLAGS_fsl-lx2160a-honeycomb := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb DTC_FLAGS_fsl-lx2160a-qds := -Wno-interrupt_map @@ -111,6 +113,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb imx8dxl-evk-pcie-ep-dtbs += imx8dxl-evk.dtb imx-pcie0-ep.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk-pcie-ep.dtb +DTC_FLAGS_imx8dxl-hummingboard-telematics := -@ +dtb-$(CONFIG_ARCH_MXC) += imx8dxl-hummingboard-telematics.dtb dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdp-mba8xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdps-mb-smarc-2.dtb @@ -177,11 +181,13 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-ivy.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-zinnia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-ivy.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-zinnia.dtb imx8mm-tqma8mqml-mba8mx-lvds-g133han01-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-g133han01.dtbo imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo @@ -206,10 +212,10 @@ imx8mn-vhip4-evalboard-v1-overlay-ksz8794-dtbs := imx8mn-vhip4-evalboard-v1.dtb imx8mn-vhip4-evalboard-v1-overlay-ksz8794.dtbo imx8mn-vhip4-evalboard-v1-overlay-ksz9031-dtbs := imx8mn-vhip4-evalboard-v1.dtb \ imx8mn-vhip4-evalboard-v1-overlay-ksz9031.dtbo -imx8mn-vhip4-evalboard-v2-overlay-ksz8794-dtbs := imx8mn-vhip4-evalboard-v2.dtb \ - imx8mn-vhip4-evalboard-v2-overlay-ksz8794.dtbo imx8mn-vhip4-evalboard-v2-overlay-adin1300-dtbs := imx8mn-vhip4-evalboard-v2.dtb \ imx8mn-vhip4-evalboard-v2-overlay-adin1300.dtbo +imx8mn-vhip4-evalboard-v2-overlay-ksz8794-dtbs := imx8mn-vhip4-evalboard-v2.dtb \ + imx8mn-vhip4-evalboard-v2-overlay-ksz8794.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mn-vhip4-evalboard-v1.dtb \ imx8mn-vhip4-evalboard-v1-overlay-ksz8794.dtb \ imx8mn-vhip4-evalboard-v1-overlay-ksz8794.dtbo \ @@ -241,9 +247,118 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-drc02.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-picoitx.dtb + +imx8mp-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh-dtbs := \ + imx8mp-dhcom-pdk2.dtb \ + imx8mp-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtbo + +imx8mp-dhcom-pdk2-overlay-531-100-x21-dtbs := \ + imx8mp-dhcom-pdk2.dtb \ + imx8mp-dhcom-pdk2-overlay-531-100-x21.dtbo + +imx8mp-dhcom-pdk2-overlay-531-100-x22-dtbs := \ + imx8mp-dhcom-pdk2.dtb \ + imx8mp-dhcom-pdk2-overlay-531-100-x22.dtbo + +imx8mp-dhcom-pdk2-overlay-560-300-x12-dtbs := \ + imx8mp-dhcom-pdk2.dtb \ + imx8mp-dhcom-pdk2-overlay-560-300-x12.dtbo + +imx8mp-dhcom-pdk2-overlay-eth1xfast-dtbs := \ + imx8mp-dhcom-pdk2.dtb \ + imx8mp-dhcom-som-overlay-eth1xfast.dtbo + +imx8mp-dhcom-pdk2-overlay-eth2xfast-dtbs := \ + imx8mp-dhcom-pdk2.dtb \ + imx8mp-dhcom-som-overlay-eth2xfast.dtbo \ + imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo + +imx8mp-dhcom-pdk3-overlay-505-200-x36-ch101olhlwh-dtbs := \ + imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-pdk3-overlay-505-200-x36-ch101olhlwh.dtbo + +imx8mp-dhcom-pdk3-overlay-531-100-x40-dtbs := \ + imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-pdk3-overlay-531-100-x40.dtbo + +imx8mp-dhcom-pdk3-overlay-531-100-x41-dtbs := \ + imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-pdk3-overlay-531-100-x41.dtbo + +imx8mp-dhcom-pdk3-overlay-560-300-x36-dtbs := \ + imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-pdk3-overlay-560-300-x36.dtbo + +imx8mp-dhcom-pdk3-overlay-732-100-x36-dtbs := \ + imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-pdk3-overlay-732-100-x36.dtbo + +imx8mp-dhcom-pdk3-overlay-ea-murata-2ae-x20-dtbs := \ + imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-pdk3-overlay-ea-murata-2ae-x20.dtbo + +imx8mp-dhcom-pdk3-overlay-eth1xfast-dtbs := \ + imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-som-overlay-eth1xfast.dtbo + +imx8mp-dhcom-pdk3-overlay-eth2xfast-dtbs := \ + imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-som-overlay-eth2xfast.dtbo \ + imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo + +imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x29-dtbs := \ + imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x29.dtbo + +imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x31-dtbs := \ + imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x31.dtbo + +dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-som-overlay-eth1xfast.dtbo \ + imx8mp-dhcom-som-overlay-eth2xfast.dtbo + +dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo + +dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb \ + imx8mp-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtb \ + imx8mp-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtbo \ + imx8mp-dhcom-pdk2-overlay-531-100-x21.dtb \ + imx8mp-dhcom-pdk2-overlay-531-100-x21.dtbo \ + imx8mp-dhcom-pdk2-overlay-531-100-x22.dtb \ + imx8mp-dhcom-pdk2-overlay-531-100-x22.dtbo \ + imx8mp-dhcom-pdk2-overlay-560-300-x12.dtb \ + imx8mp-dhcom-pdk2-overlay-560-300-x12.dtbo \ + imx8mp-dhcom-pdk2-overlay-eth1xfast.dtb \ + imx8mp-dhcom-pdk2-overlay-eth2xfast.dtb + +dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb \ + imx8mp-dhcom-pdk3-overlay-505-200-x36-ch101olhlwh.dtb \ + imx8mp-dhcom-pdk3-overlay-505-200-x36-ch101olhlwh.dtbo \ + imx8mp-dhcom-pdk3-overlay-531-100-x40.dtb \ + imx8mp-dhcom-pdk3-overlay-531-100-x40.dtbo \ + imx8mp-dhcom-pdk3-overlay-531-100-x41.dtb \ + imx8mp-dhcom-pdk3-overlay-531-100-x41.dtbo \ + imx8mp-dhcom-pdk3-overlay-560-300-x36.dtb \ + imx8mp-dhcom-pdk3-overlay-560-300-x36.dtbo \ + imx8mp-dhcom-pdk3-overlay-732-100-x36.dtb \ + imx8mp-dhcom-pdk3-overlay-732-100-x36.dtbo \ + imx8mp-dhcom-pdk3-overlay-ea-murata-2ae-x20.dtb \ + imx8mp-dhcom-pdk3-overlay-ea-murata-2ae-x20.dtbo \ + imx8mp-dhcom-pdk3-overlay-eth1xfast.dtb \ + imx8mp-dhcom-pdk3-overlay-eth2xfast.dtb \ + imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x29.dtb \ + imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x29.dtbo \ + imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x31.dtb \ + imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x31.dtbo + +imx8mp-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh-dtbs := \ + imx8mp-dhcom-picoitx.dtb \ + imx8mp-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtbo + +dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-picoitx.dtb \ + imx8mp-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtb \ + imx8mp-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtbo + dtb-$(CONFIG_ARCH_MXC) += imx8mp-edm-g-wb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-frdm.dtb @@ -345,23 +460,27 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-ivy.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-zinnia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-zinnia.dtb imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtbo imx8mp-evk-lvds0-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-lvds-hdmi.dtbo imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtbo imx8mp-evk-lvds1-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-lvds-hdmi.dtbo imx8mp-evk-mx8-dlvds-lcd1-dtbs += imx8mp-evk.dtb imx8mp-evk-mx8-dlvds-lcd1.dtbo -imx8mp-evk-pcie-ep-dtbs += imx8mp-evk.dtb imx-pcie0-ep.dtbo +imx8mp-evk-pcie-dtbs += imx8mp-evk.dtb imx-m2-pcie.dtbo +imx8mp-evk-pcie-ep-dtbs += imx8mp-evk-pcie.dtb imx-pcie0-ep.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds0-imx-lvds-hdmi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-lvds-hdmi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-mx8-dlvds-lcd1.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-pcie.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-pcie-ep.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo @@ -408,6 +527,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-tqma8qm-mba8x.dtb imx8qm-mek-ov5640-csi0-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi0.dtb @@ -438,10 +558,15 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-9x9-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx91-9x9-qsb.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-frdm.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-frdm-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-phyboard-segin.dtb + +imx91-phyboard-segin-peb-av-18-dtbs += imx91-phyboard-segin.dtb imx91-phyboard-segin-peb-av-18.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx91-phyboard-segin-peb-av-18.dtb + dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb imx91-tqma9131-mba91xxca-lvds-tm070jvhg33-dtbs := imx91-tqma9131-mba91xxca.dtb imx93-tqma9352-mba91xxca-lvds-tm070jvhg33.dtbo @@ -449,15 +574,18 @@ imx91-tqma9131-mba91xxca-rgb-cdtech-dc44-dtbs := imx91-tqma9131-mba91xxca.dtb im dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca-lvds-tm070jvhg33.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca-rgb-cdtech-dc44.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-var-dart-sonata.dtb +dtb-$(CONFIG_ARCH_MXC) += imx91-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb imx93-9x9-qsb-can1-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-can1.dtbo imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo imx93-9x9-qsb-ontat-kd50g21-40nt-a1-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtbo +imx93-9x9-qsb-tianma-tm050rdh03-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-tianma-tm050rdh03.dtbo dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-can1.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-tianma-tm050rdh03.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-frdm.dtb @@ -474,6 +602,7 @@ imx93-phyboard-nash-jtag-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-jta imx93-phyboard-nash-peb-wlbt-07-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-peb-wlbt-07.dtbo imx93-phyboard-nash-pwm-fan-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-pwm-fan.dtbo imx93-phyboard-segin-peb-av-02-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-av-02.dtbo +imx93-phyboard-segin-peb-av-18-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-av-18.dtbo imx93-phyboard-segin-peb-eval-01-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-eval-01.dtbo imx93-phyboard-segin-peb-wlbt-05-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-wlbt-05.dtbo imx93-phycore-rpmsg-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-segin.dtb imx93-phycore-rpmsg.dtbo @@ -481,6 +610,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-jtag.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-peb-wlbt-07.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-pwm-fan.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-av-02.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-av-18.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-eval-01.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-wlbt-05.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-rpmsg.dtb @@ -498,14 +628,26 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca-rgb-cdtech-dc44.dtb imx93-tqma9352-mba93xxla-mini-ezurio-wlan-dtbs += imx93-tqma9352-mba93xxla-mini.dtb imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtbo dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtb - +dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx93w-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb + +imx943-evk-pcie0-ep-dtbs += imx943-evk.dtb imx-pcie0-ep.dtbo +imx943-evk-pcie1-ep-dtbs += imx943-evk.dtb imx-pcie1-ep.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx943-evk-pcie0-ep.dtb imx943-evk-pcie1-ep.dtb + +imx943-evk-sdwifi-dtbs := imx943-evk.dtb imx943-evk-sdwifi.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx943-evk-sdwifi.dtb + +dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-ab2.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-frdm.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-frdm-pro.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-aquila-clover.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-aquila-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-var-dart-sonata.dtb @@ -514,13 +656,18 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-nonwifi-ivy.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-nonwifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-nonwifi-yavia.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-nonwifi-zinnia.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-wifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-wifi-ivy.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-wifi-yavia.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-wifi-zinnia.dtb + +imx95-15x15-evk-pcie-dtbs += imx95-15x15-evk.dtb imx-m2-pcie.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie.dtb -imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo +imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk-pcie.dtb imx-pcie0-ep.dtbo dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo imx95-19x19-evk-pcie1-ep-dtbs += imx95-19x19-evk.dtb imx-pcie1-ep.dtbo diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi index cf338b2..426a81e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi @@ -17,8 +17,8 @@ gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; - mmc0 = &esdhc; /* SD-Card */ - mmc1 = &esdhc1; /* eMMC */ + mmc0 = &esdhc1; /* eMMC */ + mmc1 = &esdhc; /* SD-Card */ serial0 = &duart0; serial1 = &duart1; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi index 90956ff..16caa28 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi @@ -4,10 +4,6 @@ // // Copyright 2019 SolidRun Ltd. -/dts-v1/; - -#include "fsl-lx2160a.dtsi" - / { model = "SolidRun LX2160A COM Express Type 7 module"; compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a"; @@ -17,6 +13,13 @@ rtc0 = &com_rtc; }; + v_1_2: regulator-1-2 { + compatible = "regulator-fixed"; + regulator-name = "1v2"; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + }; + sb_3v3: regulator-sb3v3 { compatible = "regulator-fixed"; regulator-name = "RT7290"; @@ -62,7 +65,7 @@ #size-cells = <0>; reg = <0x77>; - i2c@0 { + ddr_i2c: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -88,7 +91,7 @@ }; }; - i2c@1 { + fan_i2c: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; @@ -99,7 +102,7 @@ }; }; - i2c@2 { + power_i2c: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; @@ -110,7 +113,7 @@ }; }; - i2c@3 { + i2c_smb: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; @@ -185,10 +188,24 @@ pinctrl-0 = <&gpio0_14_12_pins>; }; -&usb0 { - status = "okay"; -}; - &usb1 { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + usb_hub_2_0: hub@1 { + compatible = "usb4b4,6502", "usb4b4,6506"; + reg = <1>; + peer-hub = <&usb_hub_3_0>; + vdd2-supply = <&sb_3v3>; + vdd-supply = <&v_1_2>; + }; + + usb_hub_3_0: hub@2 { + compatible = "usb4b4,6500", "usb4b4,6504"; + reg = <2>; + peer-hub = <&usb_hub_2_0>; + vdd2-supply = <&sb_3v3>; + vdd-supply = <&v_1_2>; + }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts index 86a9b77..802d761 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts @@ -6,6 +6,8 @@ /dts-v1/; +#include "fsl-lx2160a.dtsi" +#include "fsl-lx2160a-cex7.dtsi" #include "fsl-lx2160a-clearfog-itx.dtsi" / { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi index 580ee9b..4bc151d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi @@ -5,9 +5,6 @@ // // Copyright 2019 SolidRun Ltd. -/dts-v1/; - -#include "fsl-lx2160a-cex7.dtsi" #include / { @@ -145,3 +142,7 @@ &uart1 { status = "okay"; }; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-half-twins.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-half-twins.dts new file mode 100644 index 0000000..d16e273 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-half-twins.dts @@ -0,0 +1,830 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for single LX2160A CEX-7 on Twins board. +// +// Copyright 2022 SolidRun Ltd. + +/dts-v1/; + +#include + +#include "fsl-lx2160a-rev2.dtsi" +#include "fsl-lx2160a-cex7.dtsi" + +/ { + compatible = "solidrun,twins-single", "solidrun,lx2160a-cex7", "fsl,lx2160a"; + model = "SolidRun LX2160A SolidWAN Single"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &expander0; + gpio5 = &expander1; + gpio6 = &expander2; + gpio7 = &expander3; + i2c0 = &i2c0; + i2c1 = &i2c2; + i2c2 = &i2c4; + i2c3 = &fan_i2c; + i2c4 = &power_i2c; + i2c5 = &i2c_smb; + i2c6 = &sfp0_i2c; + i2c7 = &sfp1_i2c; + i2c8 = &sfp2_i2c; + i2c9 = &sfp3_i2c; + i2c10 = &twins_sfp_c1_at_i2c; + i2c11 = &twins_sfp_c1_ab_i2c; + i2c12 = &twins_sfp_c1_bt_i2c; + i2c13 = &twins_sfp_c1_bb_i2c; + i2c14 = &twins_sfp_c2_at_i2c; + i2c15 = &twins_sfp_c2_ab_i2c; + i2c16 = &twins_sfp_c2_bt_i2c; + i2c17 = &twins_sfp_c2_bb_i2c; + i2c18 = &twins_sfp_c3_at_i2c; + i2c19 = &twins_sfp_c3_ab_i2c; + i2c20 = &twins_sfp_c3_bt_i2c; + i2c21 = &twins_sfp_c3_bb_i2c; + i2c22 = &htwins_sfp_c3_at_i2c; + i2c23 = &htwins_sfp_c3_ab_i2c; + i2c24 = &htwins_sfp_c3_bt_i2c; + i2c25 = &htwins_sfp_c3_bb_i2c; + i2c26 = &ddr_i2c; + mmc0 = &esdhc0; + mmc1 = &esdhc1; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led_ht_c3_bt: led-sfp-1 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&expander3 14 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac5>; + linux,default-trigger = "netdev"; + }; + + led_ht_c3_bb: led-sfp-2 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&expander3 13 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac15>; + linux,default-trigger = "netdev"; + }; + + led_ht_c3_at: led-sfp-3 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + gpios = <&expander3 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac6>; + linux,default-trigger = "netdev"; + }; + + led_ht_c3_ab: led-sfp-4 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <4>; + gpios = <&expander3 12 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac11>; + linux,default-trigger = "netdev"; + }; + + led_c1_bt: led-sfp-9 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <9>; + gpios = <&expander1 4 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac4>; + linux,default-trigger = "netdev"; + }; + + led_c1_bb: led-sfp-10 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <10>; + gpios = <&expander1 3 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac17>; + linux,default-trigger = "netdev"; + }; + + led_c1_at: led-sfp-11 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <11>; + gpios = <&expander1 1 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac3>; + linux,default-trigger = "netdev"; + }; + + led_c1_ab: led-sfp-12 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <12>; + gpios = <&expander1 2 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac12>; + linux,default-trigger = "netdev"; + }; + + led_c2_bt: led-sfp-13 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <13>; + gpios = <&expander1 10 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac8>; + linux,default-trigger = "netdev"; + }; + + led_c2_bb: led-sfp-14 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <14>; + gpios = <&expander1 9 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac16>; + linux,default-trigger = "netdev"; + }; + + led_c2_at: led-sfp-15 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <15>; + gpios = <&expander1 5 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac7>; + linux,default-trigger = "netdev"; + }; + + led_c2_ab: led-sfp-16 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <16>; + gpios = <&expander1 6 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac18>; + linux,default-trigger = "netdev"; + }; + + led_c3_bt: led-sfp-17 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <17>; + gpios = <&expander1 14 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac10>; + linux,default-trigger = "netdev"; + }; + + led_c3_bb: led-sfp-18 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <18>; + gpios = <&expander1 13 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac14>; + linux,default-trigger = "netdev"; + }; + + led_c3_at: led-sfp-19 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <19>; + gpios = <&expander1 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac9>; + linux,default-trigger = "netdev"; + }; + + led_c3_ab: led-sfp-20 { + color = ; + default-state = "off"; + function = LED_FUNCTION_LAN; + function-enumerator = <20>; + gpios = <&expander1 12 GPIO_ACTIVE_LOW>; + trigger-sources = <&dpmac13>; + linux,default-trigger = "netdev"; + }; + + led-status { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <0>; + gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-status-twin { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + led-fault { + color = ; + default-state = "off"; + function = LED_FUNCTION_FAULT; + function-enumerator = <0>; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + + led-fault-twin { + color = ; + default-state = "off"; + function = LED_FUNCTION_FAULT; + function-enumerator = <1>; + gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + }; + }; + + mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + /* + * This gpio controlled mux can route the tacho signals of 6 PWM FAN connectors + * to the tacho inputs of both CEX-7 modules (twins). + * + * The first twin controls this mux and monitors four fan connectors, two intended + * for itself, and two for the OCP card. + * + * The second twin monitors only two fan connectors intended for itself. + * + * The table below maps selector GPIO states to monitored fan connector per twin: + * + * | SEL1 | SEL0 | Twin 1 | Twin 2 | + * | ---: | ---: | :------| ------ | + * | 0 | 0 | J10 | J5024 | + * | 0 | 1 | J5016 | J5024 | + * | 1 | 0 | J5026 | J5025 | + * | 1 | 1 | J5013 | J5025 | + */ + mux-gpios = <&expander0 8 GPIO_ACTIVE_HIGH>, /* SEL0 */ + <&expander0 15 GPIO_ACTIVE_HIGH>; /* SEL1 */ + }; + + ht_c3_bt_sfp: sfp-1 { + compatible = "sff,sfp"; + i2c-bus = <&htwins_sfp_c3_bt_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander2 13 GPIO_ACTIVE_LOW>; + }; + + ht_c3_bb_sfp: sfp-2 { + compatible = "sff,sfp"; + i2c-bus = <&htwins_sfp_c3_bb_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander2 14 GPIO_ACTIVE_LOW>; + }; + + ht_c3_at_sfp: sfp-3 { + compatible = "sff,sfp"; + i2c-bus = <&htwins_sfp_c3_at_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander2 11 GPIO_ACTIVE_LOW>; + }; + + ht_c3_ab_sfp: sfp-4 { + compatible = "sff,sfp"; + i2c-bus = <&htwins_sfp_c3_ab_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander2 12 GPIO_ACTIVE_LOW>; + }; + + c1_bt_sfp: sfp-9 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c1_bt_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>; + }; + + c1_bb_sfp: sfp-10 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c1_bb_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 4 GPIO_ACTIVE_LOW>; + }; + + c1_at_sfp: sfp-11 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c1_at_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; + }; + + c1_ab_sfp: sfp-12 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c1_ab_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; + }; + + c2_bt_sfp: sfp-13 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c2_bt_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 9 GPIO_ACTIVE_LOW>; + }; + + c2_bb_sfp: sfp-14 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c2_bb_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 10 GPIO_ACTIVE_LOW>; + }; + + c2_at_sfp: sfp-15 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c2_at_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 5 GPIO_ACTIVE_LOW>; + }; + + c2_ab_sfp: sfp-16 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c2_ab_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 6 GPIO_ACTIVE_LOW>; + }; + + c3_bt_sfp: sfp-17 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c3_bt_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 13 GPIO_ACTIVE_LOW>; + }; + + c3_bb_sfp: sfp-18 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c3_bb_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 14 GPIO_ACTIVE_LOW>; + }; + + c3_at_sfp: sfp-19 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c3_at_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 11 GPIO_ACTIVE_LOW>; + }; + + c3_ab_sfp: sfp-20 { + compatible = "sff,sfp"; + i2c-bus = <&twins_sfp_c3_ab_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander0 12 GPIO_ACTIVE_LOW>; + }; +}; + +/* + * This board supports industrial grade temperatures, + * the LX2160A SoC maximum junction temperature is 105°C. + * + * Raise thermal thresholds to allow operation near maximum temperature. + */ +&ccn_dpaa_alert { + temperature = <100000>; +}; + +&ccn_dpaa_crit { + temperature = <105000>; +}; + +&cluster2_3_alert { + temperature = <100000>; +}; + +&cluster2_3_crit { + temperature = <105000>; +}; + +&cluster4_alert { + temperature = <100000>; +}; + +&cluster4_crit { + temperature = <105000>; +}; + +&cluster5_alert { + temperature = <100000>; +}; + +&cluster5_crit { + temperature = <105000>; +}; + +&cluster6_7_alert { + temperature = <100000>; +}; + +&cluster6_7_crit { + temperature = <105000>; +}; + +&dce_qbman_alert { + temperature = <100000>; +}; + +&dce_qbman_crit { + temperature = <105000>; +}; + +/* sfp port 11 */ +&dpmac3 { + managed = "in-band-status"; + phys = <&serdes_1 7>; + sfp = <&c1_at_sfp>; +}; + +/* sfp port 9 */ +&dpmac4 { + managed = "in-band-status"; + phys = <&serdes_1 6>; + sfp = <&c1_bt_sfp>; +}; + +/* sfp port 1 */ +&dpmac5 { + managed = "in-band-status"; + phys = <&serdes_1 5>; + sfp = <&ht_c3_bt_sfp>; +}; + +/* sfp port 3 */ +&dpmac6 { + managed = "in-band-status"; + phys = <&serdes_1 4>; + sfp = <&ht_c3_at_sfp>; +}; + +/* sfp port 15 */ +&dpmac7 { + managed = "in-band-status"; + phys = <&serdes_1 3>; + sfp = <&c2_at_sfp>; +}; + +/* sfp port 13 */ +&dpmac8 { + managed = "in-band-status"; + phys = <&serdes_1 2>; + sfp = <&c2_bt_sfp>; +}; + +/* sfp port 19 */ +&dpmac9 { + managed = "in-band-status"; + phys = <&serdes_1 1>; + sfp = <&c3_at_sfp>; +}; + +/* sfp port 17 */ +&dpmac10 { + managed = "in-band-status"; + phys = <&serdes_1 0>; + sfp = <&c3_bt_sfp>; +}; + +/* sfp port 4 */ +&dpmac11 { + managed = "in-band-status"; + phys = <&serdes_2 0>; + sfp = <&ht_c3_ab_sfp>; +}; + +/* sfp port 12 */ +&dpmac12 { + managed = "in-band-status"; + phys = <&serdes_2 1>; + sfp = <&c1_ab_sfp>; +}; + +/* sfp port 20 */ +&dpmac13 { + managed = "in-band-status"; + phys = <&serdes_2 6>; + sfp = <&c3_ab_sfp>; +}; + +/* sfp port 18 */ +&dpmac14 { + managed = "in-band-status"; + phys = <&serdes_2 7>; + sfp = <&c3_bb_sfp>; +}; + +/* sfp port 2 */ +&dpmac15 { + managed = "in-band-status"; + phys = <&serdes_2 4>; + sfp = <&ht_c3_bb_sfp>; +}; + +/* sfp port 14 */ +&dpmac16 { + managed = "in-band-status"; + phys = <&serdes_2 5>; + sfp = <&c2_bb_sfp>; +}; + +/* sfp port 10 */ +&dpmac17 { + /* override connection to on-COM phy */ + /delete-property/ phy-handle; + /delete-property/ phy-connection-type; + managed = "in-band-status"; + phys = <&serdes_2 2>; + sfp = <&c1_bb_sfp>; +}; + +/* sfp port 16 */ +&dpmac18 { + managed = "in-band-status"; + phys = <&serdes_2 3>; + sfp = <&c2_ab_sfp>; +}; + +&esdhc0 { + pinctrl-0 = <&esdhc0_cd_wp_pins>, <&esdhc0_cmd_data30_clk_vsel_pins>; + pinctrl-names = "default"; + /* + * Disable 1.8V modes so that microsd state is same between + * power-on-reset, u-boot and linux. + * This avoids sporadic read errors after hard reset with some cards. + */ + no-1-8-v; + status = "okay"; +}; + +&i2c2 { + expander0: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; + + expander1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + }; + + expander2: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + #gpio-cells = <2>; + gpio-controller; + }; + + expander3: gpio@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + #gpio-cells = <2>; + gpio-controller; + }; + + /* Half twins configuration; take over c3 from the other twin side */ + i2c-mux@73 { + compatible = "nxp,pca9547"; + reg = <0x73>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + htwins_sfp_c3_at_i2c: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + + htwins_sfp_c3_ab_i2c: i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + htwins_sfp_c3_bt_i2c: i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + + htwins_sfp_c3_bb_i2c: i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2c-mux@76 { + compatible = "nxp,pca9547"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + twins_sfp_c1_at_i2c: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + twins_sfp_c1_ab_i2c: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + twins_sfp_c1_bt_i2c: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + + twins_sfp_c1_bb_i2c: i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + twins_sfp_c2_at_i2c: i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + + twins_sfp_c2_ab_i2c: i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + twins_sfp_c2_bt_i2c: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + twins_sfp_c2_bb_i2c: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + twins_sfp_c3_at_i2c: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + + twins_sfp_c3_ab_i2c: i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + twins_sfp_c3_bt_i2c: i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + + twins_sfp_c3_bb_i2c: i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&pcie5 { + status = "okay"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio4 { + status = "okay"; +}; + +&pcs_mdio5 { + status = "okay"; +}; + +&pcs_mdio6 { + status = "okay"; +}; + +&pcs_mdio7 { + status = "okay"; +}; + +&pcs_mdio8 { + status = "okay"; +}; + +&pcs_mdio9 { + status = "okay"; +}; + +&pcs_mdio10 { + status = "okay"; +}; + +&pcs_mdio11 { + status = "okay"; +}; + +&pcs_mdio12 { + status = "okay"; +}; + +&pcs_mdio13 { + status = "okay"; +}; + +&pcs_mdio14 { + status = "okay"; +}; + +&pcs_mdio15 { + status = "okay"; +}; + +&pcs_mdio16 { + status = "okay"; +}; + +&pcs_mdio17 { + status = "okay"; +}; + +&pcs_mdio18 { + status = "okay"; +}; + +&rgmii_phy1 { + /* + * COM has a phy at address 1 connected to SoC Ethernet Controller 1. + * It competes for WRIOP MAC17, and no connector has been wired. + */ + status = "disabled"; +}; + +&serdes_2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&wriop_alert { + temperature = <100000>; +}; + +&wriop_crit { + temperature = <105000>; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts index fe19f30..2b1e130 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts @@ -6,6 +6,8 @@ /dts-v1/; +#include "fsl-lx2160a.dtsi" +#include "fsl-lx2160a-cex7.dtsi" #include "fsl-lx2160a-clearfog-itx.dtsi" / { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi index f54005e..3d2637f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi @@ -14,8 +14,12 @@ 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 - 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; + ranges = /* 16-Bit IO Window */ + <0x81000000 0x00 0x00000000 0x80 0x00010000 0x00 0x00010000>, + /* 32-Bit - non-prefetchable */ + <0x82000000 0x00 0x40000000 0x80 0x40000000 0x00 0x40000000>, + /* 64-Bit - prefetchable - 16GB */ + <0xC3000000 0x84 0x00000000 0x84 0x00000000 0x04 0x00000000>; interrupts = ; interrupt-names = "intr"; @@ -30,8 +34,12 @@ 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 - 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; + ranges = /* 16-Bit IO Window */ + <0x81000000 0x00 0x00000000 0x88 0x00010000 0x00 0x00010000>, + /* 32-Bit - non-prefetchable */ + <0x82000000 0x00 0x40000000 0x88 0x40000000 0x00 0x40000000>, + /* 64-Bit - prefetchable - 16GB */ + <0xC3000000 0x8c 0x00000000 0x8c 0x00000000 0x04 0x00000000>; interrupts = ; interrupt-names = "intr"; @@ -46,8 +54,12 @@ 0x90 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - ranges = <0x81000000 0x0 0x00000000 0x90 0x00010000 0x0 0x00010000 - 0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; + ranges = /* 16-Bit IO Window */ + <0x81000000 0x00 0x00000000 0x90 0x00010000 0x00 0x00010000>, + /* 32-Bit - non-prefetchable */ + <0x82000000 0x00 0x40000000 0x90 0x40000000 0x00 0x40000000>, + /* 64-Bit - prefetchable - 16GB */ + <0xC3000000 0x94 0x00000000 0x94 0x00000000 0x04 0x00000000>; interrupts = ; interrupt-names = "intr"; @@ -63,8 +75,12 @@ 0x98 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - ranges = <0x81000000 0x0 0x00000000 0x98 0x00010000 0x0 0x00010000 - 0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; + ranges = /* 16-Bit IO Window */ + <0x81000000 0x00 0x00000000 0x98 0x00010000 0x00 0x00010000>, + /* 32-Bit - non-prefetchable */ + <0x82000000 0x00 0x40000000 0x98 0x40000000 0x00 0x40000000>, + /* 64-Bit - prefetchable - 16GB */ + <0xC3000000 0x9c 0x00000000 0x9c 0x00000000 0x04 0x00000000>; interrupts = ; interrupt-names = "intr"; @@ -79,8 +95,12 @@ 0xa0 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - ranges = <0x81000000 0x0 0x00000000 0xa0 0x00010000 0x0 0x00010000 - 0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; + ranges = /* 16-Bit IO Window */ + <0x81000000 0x00 0x00000000 0xa0 0x00010000 0x00 0x00010000>, + /* 32-Bit - non-prefetchable */ + <0x82000000 0x00 0x40000000 0xa0 0x40000000 0x00 0x40000000>, + /* 64-Bit - prefetchable - 16GB */ + <0xC3000000 0xa4 0x00000000 0xa4 0x00000000 0x04 0x00000000>; interrupts = ; interrupt-names = "intr"; @@ -95,8 +115,12 @@ 0xa8 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - ranges = <0x81000000 0x0 0x00000000 0xa8 0x00010000 0x0 0x00010000 - 0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; + ranges = /* 16-Bit IO Window */ + <0x81000000 0x00 0x00000000 0xa8 0x00010000 0x00 0x00010000>, + /* 32-Bit - non-prefetchable */ + <0x82000000 0x00 0x40000000 0xa8 0x40000000 0x00 0x40000000>, + /* 64-Bit - prefetchable - 16GB */ + <0xC3000000 0xac 0x00000000 0xac 0x00000000 0x04 0x00000000>; interrupts = ; interrupt-names = "intr"; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 4799829..1d73abf 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -499,13 +499,13 @@ thermal-sensors = <&tmu 1>; trips { - ddr-cluster5-alert { + cluster5_alert: ddr-cluster5-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - ddr-cluster5-crit { + cluster5_crit: ddr-cluster5-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -519,13 +519,13 @@ thermal-sensors = <&tmu 2>; trips { - wriop-alert { + wriop_alert: wriop-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - wriop-crit { + wriop_crit: wriop-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -539,13 +539,13 @@ thermal-sensors = <&tmu 3>; trips { - dce-qbman-alert { + dce_qbman_alert: dce-qbman-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - dce-qbman-crit { + dce_qbman_crit: dce-qbman-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -559,13 +559,13 @@ thermal-sensors = <&tmu 4>; trips { - ccn-dpaa-alert { + ccn_dpaa_alert: ccn-dpaa-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - ccn-dpaa-crit { + ccn_dpaa_crit: ccn-dpaa-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -579,13 +579,13 @@ thermal-sensors = <&tmu 5>; trips { - clust4-hsio3-alert { + cluster4_alert: clust4-hsio3-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - clust4-hsio3-crit { + cluster4_crit: clust4-hsio3-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -599,13 +599,13 @@ thermal-sensors = <&tmu 6>; trips { - cluster2-3-alert { + cluster2_3_alert: cluster2-3-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cluster2-3-crit { + cluster2_3_crit: cluster2-3-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts index 9d50d3e..99ee2b1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts @@ -6,7 +6,9 @@ /dts-v1/; -#include "fsl-lx2160a.dtsi" +#include + +#include "fsl-lx2160a-rev2.dtsi" #include "fsl-lx2162a-sr-som.dtsi" / { @@ -14,7 +16,6 @@ compatible = "solidrun,lx2162a-clearfog", "solidrun,lx2162a-som", "fsl,lx2160a"; aliases { - crypto = &crypto; i2c0 = &i2c0; i2c1 = &i2c2; i2c2 = &i2c4; @@ -39,6 +40,9 @@ compatible = "gpio-leds"; led_sfp_at: led-sfp-at { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* PROC_IRQ5 */ default-state = "off"; linux,default-trigger = "netdev"; @@ -46,6 +50,9 @@ }; led_sfp_ab: led-sfp-ab { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* PROC_IRQ11 */ default-state = "off"; linux,default-trigger = "netdev"; @@ -53,6 +60,9 @@ }; led_sfp_bt: led-sfp-bt { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <3>; gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; /* EVT1_B */ default-state = "off"; linux,default-trigger = "netdev"; @@ -60,6 +70,9 @@ }; led_sfp_bb: led-sfp-bb { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <4>; gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* EVT2_B */ default-state = "off"; linux,default-trigger = "netdev"; @@ -124,42 +137,36 @@ phys = <&serdes_2 0>; phy-handle = <ðernet_phy3>; phy-connection-type = "sgmii"; - status = "okay"; }; &dpmac12 { phys = <&serdes_2 1>; phy-handle = <ðernet_phy1>; phy-connection-type = "sgmii"; - status = "okay"; }; &dpmac13 { phys = <&serdes_2 6>; phy-handle = <ðernet_phy6>; phy-connection-type = "sgmii"; - status = "okay"; }; &dpmac14 { phys = <&serdes_2 7>; phy-handle = <ðernet_phy8>; phy-connection-type = "sgmii"; - status = "okay"; }; &dpmac15 { phys = <&serdes_2 4>; phy-handle = <ðernet_phy4>; phy-connection-type = "sgmii"; - status = "okay"; }; &dpmac16 { phys = <&serdes_2 5>; phy-handle = <ðernet_phy2>; phy-connection-type = "sgmii"; - status = "okay"; }; &dpmac17 { @@ -170,14 +177,12 @@ phys = <&serdes_2 2>; phy-handle = <ðernet_phy5>; phy-connection-type = "sgmii"; - status = "okay"; }; &dpmac18 { phys = <&serdes_2 3>; phy-handle = <ðernet_phy7>; phy-connection-type = "sgmii"; - status = "okay"; }; &emdio1 { @@ -314,14 +319,6 @@ }; }; -&pcie3 { - status = "disabled"; -}; - -&pcie4 { - status = "disabled"; -}; - &pcs_mdio3 { status = "okay"; }; @@ -370,10 +367,6 @@ status = "okay"; }; -&serdes_1 { - status = "okay"; -}; - &serdes_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx-m2-pcie.dtso b/arch/arm64/boot/dts/freescale/imx-m2-pcie.dtso new file mode 100644 index 0000000..1930de0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx-m2-pcie.dtso @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2026 NXP + */ + +/dts-v1/; +/plugin/; + +&pcie0 { + status = "okay"; +}; + +&m2_usdhc { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi index 469de8b..009990b 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi @@ -78,6 +78,17 @@ hsio_subsys: bus@5f000000 { power-domains = <&pd IMX_SC_R_PCIE_B>; fsl,max-link-speed = <3>; status = "disabled"; + + pcieb_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcieb_ep: pcie-ep@5f010000 { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index bc62ae5..78e8d41 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -675,6 +675,7 @@ phy-names = "pcie-phy"; pinctrl-0 = <&pinctrl_pcieb>; pinctrl-names = "default"; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcieb>; vpcie3v3aux-supply = <®_pcieb>; @@ -686,11 +687,13 @@ phy-names = "pcie-phy"; pinctrl-0 = <&pinctrl_pcieb>; pinctrl-names = "default"; - reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>; - vpcie-supply = <®_pcieb>; status = "disabled"; }; +&pcieb_port0 { + reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>; +}; + &sai0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai0>; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-hummingboard-telematics.dts b/arch/arm64/boot/dts/freescale/imx8dxl-hummingboard-telematics.dts new file mode 100644 index 0000000..3095dc8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-hummingboard-telematics.dts @@ -0,0 +1,560 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022-2026 Josua Mayer + */ + +/dts-v1/; + +#include "imx8dxl-sr-som.dtsi" + +/ { + compatible = "solidrun,imx8dxl-hummingboard-telematics", + "solidrun,imx8dxl-sr-som", "fsl,imx8dxl"; + model = "SolidRun i.MX8DXL HummingBoard Telematics"; + + aliases { + /* override ethernet aliases from imx8dxl.dtsi */ + ethernet0 = &eqos; + ethernet1 = &switch_port1; + ethernet2 = &switch_port2; + ethernet3 = &switch_port3; + ethernet4 = &switch_port4; + ethernet5 = &switch_port5; + ethernet6 = &switch_port6; + ethernet7 = &switch_port7; + ethernet8 = &switch_port8; + ethernet9 = &switch_port9; + ethernet10 = &switch_port10; + gpio8 = &tca6408_u2; + mmc2 = &usdhc3; + rtc0 = &carrier_rtc; + rtc1 = &rtc; + serial1 = &lpuart1; + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + + v_1_1: regulator-1-1 { + compatible = "regulator-fixed"; + regulator-name = "1v1"; + pinctrl-0 = <®ulator_1v1_pins>; + pinctrl-names = "default"; + regulator-always-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + vin-supply = <&v_5_0>; + gpio = <&lsio_gpio4 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + v_5_0: regulator-5-0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + }; + + /* can transceiver builtin regulator (STBN1 pin) */ + reg_flexcan1_stby: regulator-flexcan1-standby { + compatible = "regulator-fixed"; + regulator-name = "flexcan1-standby"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&tca6408_u2 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /* can transceiver builtin regulator (STBN2 pin) */ + reg_flexcan2_stby: regulator-flexcan2-standby { + compatible = "regulator-fixed"; + regulator-name = "flexcan2-standby"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&tca6408_u2 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + modem_vbat: regulator-modem-vbat { + compatible = "regulator-fixed"; + regulator-name = "modem-vbat"; + pinctrl-0 = <®ulator_modem_vbat_pins>; + pinctrl-names = "default"; + regulator-max-microvolt = <3600000>; + regulator-min-microvolt = <3600000>; + vin-supply = <&v_5_0>; + gpio = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * Cellular Modem uses VBAT, RESET_N and PWRKEY for + * power-sequencing. USB core does not currently + * support this, keep vbat on permanently and let + * userspace deal with reset/pwrkey. + */ + regulator-always-on; + regulator-boot-on; + }; + + vbus1: regulator-vbus-1 { + compatible = "regulator-fixed"; + regulator-name = "vbus1"; + pinctrl-0 = <®ulator_usb1_vbus_pins>; + pinctrl-names = "default"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + gpio = <&lsio_gpio0 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_LOW>; + }; +}; + +&dma_apbh { + status = "disabled"; +}; + +&eqos { + /* delays are added by connected ethernet-switch cpu port */ + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + pinctrl-0 = <&eqos_pins>; + pinctrl-names = "default"; + status = "okay"; + + fixed-link { + full-duplex; + speed = <1000>; + }; +}; + +&flexcan1 { + pinctrl-0 = <&flexcan1_pins>; + pinctrl-names = "default"; + xceiver-supply = <®_flexcan1_stby>; + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&flexcan2 { + pinctrl-0 = <&flexcan2_pins>; + pinctrl-names = "default"; + xceiver-supply = <®_flexcan2_stby>; + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&i2c2 { + /* routed to J14: SDA(51), SCL(53) */ + + /* regulator@18 */ + + tca6408_u2: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = "DIG_IN1", "DIG_IN2", "CAN_STNB1", "CAN_STNB2", + "DIG_OUT1", "DIG_OUT2", "", ""; + interrupts-extended = <&lsio_gpio0 20 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&tca6408_u2_int_pins>; + pinctrl-names = "default"; + }; + + carrier_rtc: rtc@32 { + compatible = "epson,rx8111"; + reg = <0x32>; + }; +}; + +&iomuxc { + bluetooth_pins: pinctrl-bluetooth-grp { + fsl,pins = < + /* BT_REG_ON: io without pull (module integrates pd) */ + IMX8DXL_SPI3_SCK_LSIO_GPIO0_IO13 0x0000061 + >; + }; + + eqos_pins: pinctrl-eqos-grp { + fsl,pins = < + /* MDIO to Switch */ + /* enet0 mdio pads supplied with 3.3v */ + /* IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIOCT */ + IMX8DXL_ENET0_MDC_CONN_EQOS_MDC 0x06000020 + IMX8DXL_ENET0_MDIO_CONN_EQOS_MDIO 0x06000020 + /* RGMII to Switch */ + IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL 0x06000020 + IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RGMII_TXC 0x06000020 + IMX8DXL_ENET1_RGMII_TXD0_CONN_EQOS_RGMII_TXD0 0x06000020 + IMX8DXL_ENET1_RGMII_TXD1_CONN_EQOS_RGMII_TXD1 0x06000020 + IMX8DXL_ENET1_RGMII_TXD2_CONN_EQOS_RGMII_TXD2 0x06000020 + IMX8DXL_ENET1_RGMII_TXD3_CONN_EQOS_RGMII_TXD3 0x06000020 + IMX8DXL_ENET1_RGMII_RXC_CONN_EQOS_RGMII_RXC 0x06000020 + IMX8DXL_ENET1_RGMII_RX_CTL_CONN_EQOS_RGMII_RX_CTL 0x06000020 + IMX8DXL_ENET1_RGMII_RXD0_CONN_EQOS_RGMII_RXD0 0x06000020 + IMX8DXL_ENET1_RGMII_RXD1_CONN_EQOS_RGMII_RXD1 0x06000020 + IMX8DXL_ENET1_RGMII_RXD2_CONN_EQOS_RGMII_RXD2 0x06000020 + IMX8DXL_ENET1_RGMII_RXD3_CONN_EQOS_RGMII_RXD3 0x06000020 + >; + }; + + flexcan1_pins: pinctrl-flexcan1-grp { + fsl,pins = < + IMX8DXL_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x00000021 + IMX8DXL_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x00000021 + >; + }; + + flexcan2_pins: pinctrl-flexcan2-grp { + fsl,pins = < + IMX8DXL_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x00000021 + IMX8DXL_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x00000021 + >; + }; + + lpspi0_pins: pinctrl-lpspi0-grp { + fsl,pins = < + IMX8DXL_SPI0_SCK_ADMA_SPI0_SCK 0x600004c + IMX8DXL_SPI0_SDO_ADMA_SPI0_SDO 0x600004c + IMX8DXL_SPI0_SDI_ADMA_SPI0_SDI 0x600004c + IMX8DXL_SPI0_CS0_LSIO_GPIO1_IO08 0x0000021 + IMX8DXL_SPI0_CS1_LSIO_GPIO1_IO07 0x0000021 + >; + }; + + lpuart1_pins: pinctrl-lpuart1-grp { + fsl,pins = < + IMX8DXL_UART1_RX_ADMA_UART1_RX 0x06000020 + IMX8DXL_UART1_TX_ADMA_UART1_TX 0x06000020 + IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B 0x06000020 + IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B 0x06000020 + >; + }; + + modem_pins: pinctrl-lte-grp { + fsl,pins = < + /* modem RESET_N: io open drain drive 2mA */ + IMX8DXL_ADC_IN3_LSIO_GPIO1_IO11 0x2000061 + + /* modem PWRKEY: io open drain with pull-up, drive 2mA */ + IMX8DXL_ADC_IN2_LSIO_GPIO1_IO12 0x2000021 + >; + }; + + regulator_1v1_pins: pinctrl-regulator-1-1-grp { + fsl,pins = < + /* SW_PE: io without pull-up */ + IMX8DXL_USB_SS3_TC2_LSIO_GPIO4_IO05 0x0000061 + >; + }; + + regulator_modem_vbat_pins: pinctrl-regulator-modem-vbat-grp { + fsl,pins = < + /* + * RF_PWR: io without pull-up, + * has either external pull-up (R1117) or pull-down (R1118). + * With pull-up Modem will boot at system power-up, + * with pull-down modem will enter power-down mode once + * vbat is enabled -> toggle pwrkey to boot modem. + * Hence pull-up (R1117) is preferred. + */ + IMX8DXL_SPI3_SDO_LSIO_GPIO0_IO14 0x0000061 + >; + }; + + regulator_usb1_vbus_pins: pinctrl-regulator-usb1-vbus-grp { + fsl,pins = < + /* regulator enable: open-drain with pull-up & low drive strength */ + IMX8DXL_SPI3_CS0_LSIO_GPIO0_IO16 0x2000021 + >; + }; + + switch_pins: pinctrl-switch-grp { + fsl,pins = < + /* SW_RSTn: io without pull-up */ + IMX8DXL_USB_SS3_TC0_LSIO_GPIO4_IO03 0x0000021 + + /* SW_CORE_RSTn: io without pull-up */ + IMX8DXL_USB_SS3_TC1_LSIO_GPIO4_IO04 0x0000021 + + /* INT_N: io without pull-up */ + IMX8DXL_USB_SS3_TC3_LSIO_GPIO4_IO06 0x0000021 + >; + }; + + tca6408_u2_int_pins: pinctrl-tca6408-u2-int-grp { + fsl,pins = < + /* gpio-expander interrupt: io with pull-up */ + IMX8DXL_MCLK_OUT0_LSIO_GPIO0_IO20 0x0000021 + >; + }; + + usdhc3_pins: pinctrl-usdhc3-grp { + fsl,pins = < + IMX8DXL_ENET0_RGMII_TXC_CONN_USDHC2_CLK 0x06000040 + IMX8DXL_ENET0_RGMII_TX_CTL_CONN_USDHC2_CMD 0x00000021 + IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC2_DATA0 0x00000021 + IMX8DXL_ENET0_RGMII_TXD1_CONN_USDHC2_DATA1 0x00000021 + IMX8DXL_ENET0_RGMII_TXD2_CONN_USDHC2_DATA2 0x00000021 + IMX8DXL_ENET0_RGMII_TXD3_CONN_USDHC2_DATA3 0x00000021 + >; + }; + + wifi_pins: pinctrl-wifi-grp { + fsl,pins = < + /* WL_REG_ON: io without pull (module integrates pd) */ + IMX8DXL_SPI3_SDI_LSIO_GPIO0_IO15 0x0000061 + >; + }; +}; + +&lpspi0 { + cs-gpios = <&lsio_gpio1 8 GPIO_ACTIVE_LOW>, <&lsio_gpio1 7 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&lpspi0_pins>, <&switch_pins>; + pinctrl-names = "default"; + status = "okay"; + + ethernet-switch@0 { + compatible = "nxp,sja1110a"; + reg = <0>; + reset-gpios = <&lsio_gpio4 3 GPIO_ACTIVE_LOW>; + spi-max-frequency = <4000000>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* 100Base-TX on connector J26 */ + switch_port1: port@1 { + reg = <0x1>; + phy-handle = <&switch_port1_base_tx_phy>; + phy-mode = "internal"; + }; + + /* CPU */ + switch_port2: port@2 { + reg = <0x2>; + ethernet = <&eqos>; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; + + fixed-link { + full-duplex; + speed = <1000>; + }; + }; + + /* sgmii on addon board connector J21 */ + switch_port3: port@3 { + reg = <0x3>; + status = "disabled"; + }; + + /* sgmii on addon board connector J21 */ + switch_port4: port@4 { + reg = <0x4>; + status = "disabled"; + }; + + /* 100base-t1 on addon board connector J21 */ + switch_port5: port@5 { + reg = <0x5>; + phy-handle = <&switch_port5_base_t1_phy>; + phy-mode = "internal"; + status = "disabled"; + }; + + /* 100base-t1 on addon board connector J21 */ + switch_port6: port@6 { + reg = <0x6>; + phy-handle = <&switch_port6_base_t1_phy>; + phy-mode = "internal"; + status = "disabled"; + }; + + /* 100base-t1 on addon board connector J21 */ + switch_port7: port@7 { + reg = <0x7>; + phy-handle = <&switch_port7_base_t1_phy>; + phy-mode = "internal"; + status = "disabled"; + }; + + /* 100base-t1 on addon board connector J21 */ + switch_port8: port@8 { + reg = <0x8>; + phy-handle = <&switch_port8_base_t1_phy>; + phy-mode = "internal"; + status = "disabled"; + }; + + /* 100base-t1 on addon board connector J21 */ + switch_port9: port@9 { + reg = <0x9>; + phy-handle = <&switch_port9_base_t1_phy>; + phy-mode = "internal"; + status = "disabled"; + }; + + /* 100Base-T1 on connector J26 */ + switch_port10: port@a { + reg = <0xa>; + phy-handle = <&switch_port10_base_t1_phy>; + phy-mode = "internal"; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + compatible = "nxp,sja1110-base-t1-mdio"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + /* 100base-t1 on addon board connector J21 */ + switch_port5_base_t1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + status = "disabled"; + }; + + /* 100base-t1 on addon board connector J21 */ + switch_port6_base_t1_phy: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + status = "disabled"; + }; + + /* 100base-t1 on addon board connector J21 */ + switch_port7_base_t1_phy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + status = "disabled"; + }; + + /* 100base-t1 on addon board connector J21 */ + switch_port8_base_t1_phy: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + status = "disabled"; + }; + + /* 100base-t1 on addon board connector J21 */ + switch_port9_base_t1_phy: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x5>; + status = "disabled"; + }; + + /* 100Base-T1 on connector J26 */ + switch_port10_base_t1_phy: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x6>; + }; + }; + + mdio@1 { + compatible = "nxp,sja1110-base-tx-mdio"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* 100Base-TX on connector J26 */ + switch_port1_base_tx_phy: ethernet-phy@1 { + reg = <0x1>; + }; + }; + }; + }; +}; + +/* bluetooth */ +&lpuart1 { + pinctrl-0 = <&lpuart1_pins>, <&bluetooth_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&osc_32k>; + clock-names = "lpo"; + /* Murata 1MW module supports max. 3M baud */ + max-speed = <3000000>; + shutdown-gpios = <&lsio_gpio0 13 GPIO_ACTIVE_HIGH>; + /* link fixed supplies to avoid fall-back lookup by name */ + vbat-supply = <&v_3_3>; + vddio-supply = <&v_1_8>; + }; +}; + +&lsio_gpio1 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "CELL_RESET_N", "CELL_PWRKEY", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&usbotg1 { + dr_mode = "host"; + vbus-supply = <&vbus1>; +}; + +/* cellular modem */ +&usbotg2 { + #address-cells = <1>; + #size-cells = <0>; + adp-disable; + disable-over-current; + dr_mode = "host"; + hnp-disable; + pinctrl-0 = <&modem_pins>; + pinctrl-names = "default"; + power-active-high; + srp-disable; + vbus-supply = <&v_5_0>; + status = "okay"; + + usb-device@1 { + compatible = "usb2c7c,125"; + reg = <1>; + vbus-supply = <&v_3_3>; + vdd-supply = <&modem_vbat>; + }; +}; + +&usbphy2 { + status = "okay"; +}; + +/* WiFi */ +&usdhc3 { + bus-width = <4>; + cap-sdio-irq; + mmc-pwrseq = <&usdhc3_pwrseq>; + non-removable; + no-sd; + pinctrl-0 = <&usdhc3_pins>, <&wifi_pins>; + pinctrl-names = "default"; + vmmc-supply = <&v_3_3>; + vqmmc-supply = <&v_1_8>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-sr-som.dtsi new file mode 100644 index 0000000..93a0eb4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-sr-som.dtsi @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022-2026 Josua Mayer + */ + +#include "imx8dxl.dtsi" +/ { + compatible = "solidrun,imx8dxl-sr-som", "fsl,imx8dxl"; + model = "SolidRun i.MX8DXL SoM"; + + aliases { + i2c2 = &i2c2; + i2c3 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &lpuart0; + serial2 = &lpuart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + imx8dxl-cm4 { + compatible = "fsl,imx8qxp-cm4"; + clocks = <&clk_dummy>; + mboxes = <&lsio_mu5 0 1 &lsio_mu5 1 1 &lsio_mu5 3 1>; + mbox-names = "tx", "rx", "rxdb"; + memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, + <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>; + power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>; + fsl,entry-address = <0x34fe0000>; + fsl,resource-id = ; + }; + + pps { + compatible = "pps-gpio"; + gpios = <&lsio_gpio2 6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&gnss_pps_pins>; + pinctrl-names = "default"; + }; + + v_1_2: regulator-1-2 { + compatible = "regulator-fixed"; + regulator-name = "1v2"; + pinctrl-0 = <®ulator_1_2_pins>; + pinctrl-names = "default"; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + gpio = <&lsio_gpio1 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + v_1_6: regulator-1-6 { + compatible = "regulator-fixed"; + regulator-name = "1v6"; + pinctrl-0 = <®ulator_1_6_pins>; + pinctrl-names = "default"; + regulator-max-microvolt = <1600000>; + regulator-min-microvolt = <1600000>; + vin-supply = <&v_1_8>; + gpio = <&lsio_gpio1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + v_1_8: regulator-1-8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + }; + + v_1_8_se: regulator-1-8-secure-element { + compatible = "regulator-fixed"; + regulator-name = "1v8-se"; + pinctrl-0 = <®ulator_1_8_se_pins>; + pinctrl-names = "default"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + vin-supply = <&v_1_8>; + gpio = <&lsio_gpio3 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + v_3_3: regulator-3-3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x98000000 0 0x14000000>; + reusable; + size = <0 0x14000000>; + linux,cma-default; + }; + + vdev0vring0: memory0@90000000 { + reg = <0 0x90000000 0 0x8000>; + no-map; + }; + + vdev0vring1: memory@90008000 { + reg = <0 0x90008000 0 0x8000>; + no-map; + }; + + vdev1vring0: memory@90010000 { + reg = <0 0x90010000 0 0x8000>; + no-map; + }; + + vdev1vring1: memory@90018000 { + reg = <0 0x90018000 0 0x8000>; + no-map; + }; + + rsc_table: memory-rsc-table@900ff000 { + reg = <0 0x900ff000 0 0x1000>; + no-map; + }; + + vdevbuffer: memory-vdevbuffer@90400000 { + compatible = "shared-dma-pool"; + reg = <0 0x90400000 0 0x100000>; + no-map; + }; + + /* + * Memory reserved for optee usage. Please do not use. + * This will be automatically added to dtb if OP-TEE is installed. + * optee@96000000 { + * reg = <0 0x96000000 0 0x2000000>; + * no-map; + * }; + */ + }; + + memory@80000000 { + reg = <0x00000000 0x80000000 0 0x40000000>; + device_type = "memory"; + }; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-1 = <&i2c2_gpio_pins>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&lsio_gpio3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&lsio_gpio3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-1 = <&i2c3_gpio_pins>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&lsio_gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&lsio_gpio3 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + magnetometer@1e { + compatible = "st,iis2mdc"; + reg = <0x1e>; + interrupt-parent = <&lsio_gpio2>; + interrupts = <10 IRQ_TYPE_EDGE_RISING>; + pinctrl-0 = <&magnetometer_pins>; + pinctrl-names = "default"; + st,drdy-int-pin = <1>; + }; + + /* pressure-sensor@5c */ + + inertial-sensor@6b { + compatible = "st,ism330dhcx"; + reg = <0x6b>; + interrupt-parent = <&lsio_gpio2>; + interrupts = <11 IRQ_TYPE_EDGE_RISING>; + pinctrl-0 = <&imu_pins>; + pinctrl-names = "default"; + st,drdy-int-pin = <1>; + }; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_hog>; + pinctrl-names = "default"; + + pinctrl_hog: hoggrp { + fsl,pins = < + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD 0x000014a0 + >; + }; + + dsrc_pins: pinctrl-dsrc-grp { + fsl,pins = < + /* reset: io without pull */ + IMX8DXL_ADC_IN0_LSIO_GPIO1_IO10 0x0000060 + + /* + * boot0: io without pull + * After reset, this pin selects radio boot media: + * - 0: flash spi + * - 1: slave sdio + * Once the firmware boots however, the radio controls + * this pin for flow-control to signal readiness. + */ + IMX8DXL_ADC_IN1_LSIO_GPIO1_IO09 0x0000060 + >; + }; + + gnss_pins: pinctrl-gnss-grp { + fsl,pins = < + /* gps reset: input with pull-up */ + IMX8DXL_SNVS_TAMPER_OUT4_LSIO_GPIO2_IO08_IN 0x0000021 + /* gps interrupt: io without pull-up */ + IMX8DXL_SNVS_TAMPER_IN0_LSIO_GPIO2_IO09_IN 0x0000061 + >; + }; + + gnss_pps_pins: pinctrl-gnss-pps-grp { + fsl,pins = < + /* gps timepulse: input without pull-up */ + IMX8DXL_SNVS_TAMPER_OUT2_LSIO_GPIO2_IO06_IN 0x0000061 + >; + }; + + i2c2_gpio_pins: pinctrl-i2c2-gpio-grp { + fsl,pins = < + /* io with pull-up and weak drive */ + IMX8DXL_SPI1_SCK_LSIO_GPIO3_IO00 0x00000021 + /* io with pull-up, weak drive, open-drain */ + IMX8DXL_SPI1_SDO_LSIO_GPIO3_IO01 0x02000021 + >; + }; + + i2c2_pins: pinctrl-i2c2-grp { + fsl,pins = < + /* io with pull-up and weak drive */ + IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA 0x06000021 + IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL 0x06000021 + >; + }; + + i2c3_gpio_pins: pinctrl-i2c3-gpio-grp { + fsl,pins = < + /* io with pull-up and weak drive */ + IMX8DXL_SPI1_CS0_LSIO_GPIO3_IO03 0x00000021 + /* io with pull-up, weak drive, open-drain */ + IMX8DXL_SPI1_SDI_LSIO_GPIO3_IO02 0x02000021 + >; + }; + + i2c3_pins: pinctrl-i2c3-grp { + fsl,pins = < + /* io with pull-up and weak drive */ + IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA 0x06000021 + IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL 0x06000021 + >; + }; + + imu_pins: pinctrl-imu-grp { + fsl,pins = < + /* interrupt: io with pull-down */ + IMX8DXL_SNVS_TAMPER_IN2_LSIO_GPIO2_IO11_IN 0x0000041 + >; + }; + + lpspi2_pins: pinctrl-lpspi2-grp { + fsl,pins = < + IMX8DXL_USDHC1_RESET_B_ADMA_SPI2_SCK 0x600004c + IMX8DXL_USDHC1_VSELECT_ADMA_SPI2_SDO 0x600004c + IMX8DXL_USDHC1_WP_ADMA_SPI2_SDI 0x600004c + IMX8DXL_USDHC1_CD_B_LSIO_GPIO4_IO22 0x6000021 + >; + }; + + lpuart0_pins: pinctrl-lpuart0-grp { + fsl,pins = < + IMX8DXL_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + lpuart2_pins: pinctrl-lpuart2-grp { + fsl,pins = < + IMX8DXL_UART2_TX_ADMA_UART2_TX 0x06000020 + IMX8DXL_UART2_RX_ADMA_UART2_RX 0x06000020 + >; + }; + + magnetometer_pins: pinctrl-magnetometer-grp { + fsl,pins = < + /* interrupt: io with pull-down */ + IMX8DXL_SNVS_TAMPER_IN1_LSIO_GPIO2_IO10_IN 0x0000041 + >; + }; + + regulator_1_2_pins: pinctrl-regulator-1-2-grp { + fsl,pins = < + /* io without pull-up */ + /* has etxernal pull-down */ + IMX8DXL_ADC_IN5_LSIO_GPIO1_IO13 0x0000061 + >; + }; + + regulator_1_6_pins: pinctrl-regulator-1-6-grp { + fsl,pins = < + /* io without pull-up */ + /* has etxernal pull-down */ + IMX8DXL_ADC_IN4_LSIO_GPIO1_IO14 0x0000061 + >; + }; + + regulator_1_8_se_pins: pinctrl-regulator-1-8-secure-element-grp { + fsl,pins = < + /* v2x-secure-element power switch: io with pull-down */ + IMX8DXL_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x0000041 + >; + }; + + se_pins: pinctrl-secure-element-grp { + fsl,pins = < + /* v2x-secure-element reset: io with pull-up */ + IMX8DXL_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x0000021 + + /* + * v2x-secure-element gpio0: io with pull-up + * pulled low by sxf after boot indicating ready for commands + */ + IMX8DXL_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x0000021 + + /* v2x-secure-element gpio1: io with pull-up */ + IMX8DXL_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x0000021 + >; + }; + + usdhc1_pins: pinctrl-usdhc1-grp { + fsl,pins = < + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + IMX8DXL_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000061 + >; + }; + + usdhc2_pins: pinctrl-usdhc2-grp { + fsl,pins = < + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000040 + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021 + IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021 + IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021 + IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021 + IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021 + >; + }; +}; + +&lpspi2 { + cs-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + num-cs = <1>; + pinctrl-0 = <&lpspi2_pins>, <&se_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* console */ +&lpuart0 { + pinctrl-0 = <&lpuart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* gnss */ +&lpuart2 { + pinctrl-0 = <&lpuart2_pins>, <&gnss_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&lsio_gpio3 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "SXF_RST", "SXF_GPIO0", "SXF_GPIO1", "", "", + "", "", "", "", "", "", "", ""; +}; + +&lsio_mu5 { + status = "okay"; +}; + +/* OTG port for boot */ +&usbotg1 { + adp-disable; + disable-over-current; + dr_mode = "peripheral"; + hnp-disable; + power-active-high; + srp-disable; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + bus-width = <8>; + cap-mmc-hw-reset; + non-removable; + no-sd; + no-sdio; + pinctrl-0 = <&usdhc1_pins>; + pinctrl-1 = <&usdhc1_pins>; + pinctrl-2 = <&usdhc1_pins>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + vmmc-supply = <&v_3_3>; + vqmmc-supply = <&v_1_8>; + status = "okay"; +}; + +/* DSRC Radio */ +&usdhc2 { + bus-width = <4>; + keep-power-in-suspend; + max-frequency = <40000000>; + non-removable; + no-sd; + pinctrl-0 = <&usdhc2_pins>, <&dsrc_pins>; + pinctrl-names = "default"; + vmmc-supply = <&v_3_3>; + vqmmc-supply = <&v_1_8>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 8be44ea..e03aba8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -533,6 +533,7 @@ &pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, <&clk IMX8MM_CLK_PCIE1_AUX>; @@ -559,6 +560,10 @@ status = "disabled"; }; +&pcie0_port0 { + reset-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; +}; + &sai2 { #sound-dai-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts index e756fe5..dd59af0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts @@ -254,10 +254,6 @@ status = "okay"; }; -®_nvcc_sd { - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; -}; - &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -466,7 +462,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; @@ -479,7 +475,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; @@ -492,7 +488,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi index 9698791..4fb13d8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi @@ -342,7 +342,6 @@ regulator-name = "NVCC_SD (LDO5)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; }; }; @@ -795,7 +794,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 /* SDIO_A_D2 */ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 /* SDIO_A_D3 */ MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */ - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000090 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90 >; }; @@ -808,7 +807,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 /* SDIO_A_D2 */ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 /* SDIO_A_D3 */ MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */ - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000090 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90 >; }; @@ -821,7 +820,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 /* SDIO_A_D2 */ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 /* SDIO_A_D3 */ MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */ - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000090 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-zinnia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-zinnia.dts new file mode 100644 index 0000000..07b4daf --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-zinnia.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano + * https://www.toradex.com/products/carrier-board/zinnia-carrier-board + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-nonwifi.dtsi" +#include "imx8mm-verdin-zinnia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini on Zinnia"; + compatible = "toradex,verdin-imx8mm-nonwifi-zinnia", + "toradex,verdin-imx8mm-nonwifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-zinnia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-zinnia.dts new file mode 100644 index 0000000..01a254d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-zinnia.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano + * https://www.toradex.com/products/carrier-board/zinnia-carrier-board + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-wifi.dtsi" +#include "imx8mm-verdin-zinnia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini WB on Zinnia"; + compatible = "toradex,verdin-imx8mm-wifi-zinnia", + "toradex,verdin-imx8mm-wifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-zinnia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-zinnia.dtsi new file mode 100644 index 0000000..686486e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-zinnia.dtsi @@ -0,0 +1,383 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Common dtsi for Verdin IMX8MM SoM on Zinnia carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano + * https://www.toradex.com/products/carrier-board/zinnia-carrier-board + */ + +#include + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_zinnia_leds>; + + /* LED1 Red - SODIMM 48 - LED1_R */ + led-0 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + }; + + /* LED1 Blue - SODIMM 46 - LED1_B */ + led-1 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + }; + + /* LED3 Red - SODIMM 44 - LED3_R */ + led-2 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <3>; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + }; + + /* LED3 Green - SODIMM 54 - LED3_G */ + led-3 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <3>; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + /* LED3 Blue - SODIMM 36 - LED3_B */ + led-4 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <3>; + gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; + }; + + /* LED4 Red - SODIMM 34 - LED4_R */ + led-5 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <4>; + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; + }; + + /* LED4 Green - SODIMM 32 - LED4_G */ + led-6 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <4>; + gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + }; + + /* LED4 Blue - SODIMM 30 - LED4_B */ + led-7 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <4>; + gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>; + }; + }; + + zinnia-1v8-voltage { + compatible = "voltage-divider"; + full-ohms = <39000>; /* 12k + 27k */ + /* Verdin ADC_4 */ + io-channels = <&verdin_som_adc 4>; + output-ohms = <27000>; + }; + + zinnia-3v3-voltage { + compatible = "voltage-divider"; + full-ohms = <54000>; /* 27k + 27k */ + /* Verdin ADC_3 */ + io-channels = <&verdin_som_adc 5>; + output-ohms = <27000>; + }; + + zinnia-5v-voltage { + compatible = "voltage-divider"; + full-ohms = <39000>; /* 27k + 12k */ + /* Verdin ADC_2 */ + io-channels = <&verdin_som_adc 6>; + output-ohms = <12000>; + }; + + /* Zinnia Power Supply Input Voltage */ + zinnia-input-voltage { + compatible = "voltage-divider"; + full-ohms = <204700>; /* 200k + 4.7k */ + /* Verdin ADC_1 */ + io-channels = <&verdin_som_adc 7>; + output-ohms = <4700>; + }; +}; + +/* Verdin SPI_1 */ +&ecspi2 { + pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_uart3_cts_gpio>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio5 13 GPIO_ACTIVE_LOW>; + + status = "okay"; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + spi-max-frequency = <18500000>; + }; +}; + +/* EEPROM on Zinnia */ +&eeprom_carrier_board { + status = "okay"; +}; + +/* Verdin ETH_1 */ +&fec1 { + status = "okay"; +}; + +&gpio1 { + gpio-line-names = + "DI2_RB", /* SODIMM 216 */ /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "DO3_EN", /* SODIMM 220 */ + "DI3_EN", /* SODIMM 222 */ + "", /* 10 */ + "DI2_EN", /* SODIMM 218 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + ""; +}; + +&gpio2 { + gpio-line-names = + "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; /* 20 */ +}; + +&gpio3 { + gpio-line-names = + "", /* 0 */ + "", + "", + "", + "DO1_EN", /* SODIMM 206 */ + "", + "DI3_RB", /* SODIMM 56 */ + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + ""; +}; + +&gpio4 { + gpio-line-names = + "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +&gpio5 { + gpio-line-names = + "", /* 0 */ + "", + "", + "", + "", + "DI1_EN", /* SODIMM 208 */ + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "DI1_RB", /* SODIMM 210 */ + "DO2_EN", /* SODIMM 212 */ + "", + ""; +}; + +/* Temperature sensor on Zinnia */ +&hwmon_temp { + compatible = "ti,tmp1075"; + + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_rts>; + rs485-rx-during-tx; + linux,rs485-enabled-at-boot-time; + + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbotg1 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbotg2 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>, + <&pinctrl_gpio2>, + <&pinctrl_gpio3>, + <&pinctrl_gpio4>, + <&pinctrl_gpio5>, + <&pinctrl_gpio6>, + <&pinctrl_gpio7>, + <&pinctrl_gpio8>, + <&pinctrl_qspi1_io0_gpio>; + + pinctrl_qspi1_io0_gpio: gpio3io6grp { + fsl,pins = ; /* SODIMM 56 */ + }; + + pinctrl_uart3_cts_gpio: gpio5io9grp { + fsl,pins = ; /* SODIMM 143 */ + }; + + pinctrl_zinnia_leds: zinnialedsgrp { + fsl,pins = + , /* SODIMM 30 */ + , /* SODIMM 32 */ + , /* SODIMM 34 */ + , /* SODIMM 36 */ + , /* SODIMM 44 */ + , /* SODIMM 46 */ + , /* SODIMM 48 */ + ; /* SODIMM 54 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 1594ce9..5fc177f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -735,7 +735,7 @@ /* Verdin UART_2 */ &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_cts>, <&pinctrl_uart3_rts>; uart-has-rtscts; }; @@ -1144,12 +1144,20 @@ ; /* SODIMM 129 */ }; + pinctrl_uart3_cts: uart3ctsgrp { + fsl,pins = + ; /* SODIMM 143 */ + }; + + pinctrl_uart3_rts: uart3rtsgrp { + fsl,pins = + ; /* SODIMM 141 */ + }; + pinctrl_uart3: uart3grp { fsl,pins = - , /* SODIMM 141 */ , /* SODIMM 139 */ - , /* SODIMM 137 */ - ; /* SODIMM 143 */ + ; /* SODIMM 137 */ }; pinctrl_uart4: uart4grp { diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 4cc5ad0..5cf2998 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -1370,6 +1370,17 @@ phys = <&pcie_phy>; phy-names = "pcie-phy"; status = "disabled"; + + pcie0_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_ep: pcie-ep@33800000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v1.dts b/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v1.dts index 5f37065..a8f7c22 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v1.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v1.dts @@ -112,7 +112,7 @@ &ifm_pmic { interrupt-parent = <&gpio2>; - interrupts = <0 GPIO_ACTIVE_LOW>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &iomuxc { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts b/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts index 4dadfb7..43fd4d0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts @@ -99,7 +99,7 @@ &ifm_pmic { interrupt-parent = <&gpio5>; - interrupts = <17 GPIO_ACTIVE_LOW>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; &iomuxc { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts b/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts index dbbc0df..443e4fd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts @@ -281,7 +281,7 @@ compatible = "nxp,pca9450c"; reg = <0x25>; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_pmic>; regulators { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-ch101olhlwh.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-ch101olhlwh.dtsi new file mode 100644 index 0000000..cabda86 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-ch101olhlwh.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022-2026 Marek Vasut + */ + +&display_bl { + pwms = <&pwm1 0 5000000 0>; +}; + +&i2c_dhpdk_panel { + #address-cells = <1>; + #size-cells = <0>; + + touch_lvds: touchscreen@41 { + compatible = "ilitek,ili251x"; + reg = <0x41>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <16384>; + touchscreen-size-y = <9600>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&panel { + compatible = "chefree,ch101olhlwh-002"; +}; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-clock.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-clock.dtsi new file mode 100644 index 0000000..8e70263 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-clock.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024-2026 Marek Vasut + */ + +#include + +&media_blk_ctrl { + /* + * Sys PLL3 supplies TC9595 RefClk + * Audio PLL2 supplies MEDIA_DISP1_PIX (DSI) + * Video PLL1 supplies MEDIA_DISP2_PIX (LVDS) + */ + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>, + <&clk IMX8MP_CLK_MEDIA_APB>, + <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, + <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, + <&clk IMX8MP_AUDIO_PLL2>, + <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_AUDIO_PLL2_OUT>, + <&clk IMX8MP_VIDEO_PLL1_OUT>; + assigned-clock-rates = <500000000>, <200000000>, + <0>, <0>, <0>, <0>; +}; + +&tc_bridge { + assigned-clocks = <&clk IMX8MP_CLK_CLKOUT2_SEL>, + <&clk IMX8MP_CLK_CLKOUT2>, + <&clk IMX8MP_SYS_PLL3_OUT>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL3_OUT>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-common.dtsi new file mode 100644 index 0000000..e8e4b40 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-common.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ + +#include +#include +#include +#include + +#include "imx8mp-dhcom-overlay-panel-clock.dtsi" + +&{/} { + display_bl: display-bl { + compatible = "pwm-backlight"; + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */ + status = "okay"; + }; + + panel: panel { + backlight = <&display_bl>; + power-supply = <®_vdd_3p3v_awo>; + + port { + panel_in: endpoint { + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-dpi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-dpi.dtsi new file mode 100644 index 0000000..9c81e9f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-dpi.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022-2026 Marek Vasut + */ + +#include "imx8mp-dhcom-overlay-panel-common.dtsi" + +&lcdif1 { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; +}; + +&panel_in { + remote-endpoint = <&tc_bridge_out>; +}; + +&tc_bridge { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + tc_bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-etm0700g0edh6.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-etm0700g0edh6.dtsi new file mode 100644 index 0000000..e3a5213 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-etm0700g0edh6.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2022-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include +#include "imx8mp-dhcom-overlay-panel-dpi.dtsi" + +&{/} { + led { + led-0 { + /* LED5 GPIO conflicts with Touchscreen IRQ GPIO-E */ + status = "disabled"; + }; + }; +}; + +&i2c_dhpdk_panel { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dhcom_e>; + /* Touchscreen IRQ GPIO-E conflicts with LED5 GPIO */ + interrupt-parent = <&gpio5>; + interrupts = <22 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + }; +}; + +&display_bl { + pwms = <&pwm1 0 5000000 PWM_POLARITY_INVERTED>; +}; + +&mipi_dsi { + /* + * This is DSIM PLL frequency, DSI HS clock lane frequency + * is half of the "samsung,burst-clock-frequency" value. + */ + samsung,burst-clock-frequency = <500000000>; +}; + +&panel { + compatible = "edt,etm0700g0edh6"; +}; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-lvds.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-lvds.dtsi new file mode 100644 index 0000000..c6e60a9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-lvds.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ + +#include "imx8mp-dhcom-overlay-panel-common.dtsi" + +&ldb_lvds_ch0 { + remote-endpoint = <&panel_in>; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + status = "okay"; +}; + +&panel_in { + remote-endpoint = <&ldb_lvds_ch0>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk-overlay-eth2xfast.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk-overlay-eth2xfast.dtso new file mode 100644 index 0000000..0da2b11 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk-overlay-eth2xfast.dtso @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +ðphypdk { /* Micrel KSZ9131RNXI */ + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtso new file mode 100644 index 0000000..92f92e6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-505-200-x12-ch101olhlwh.dtso @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx8mp-dhcom-overlay-panel-lvds.dtsi" +#include "imx8mp-dhcom-overlay-panel-ch101olhlwh.dtsi" + +&{/} { + gpio-keys { + button-1 { + /* BUTTON1 GPIO conflicts with Touchscreen RESET GPIO-B */ + status = "disabled"; + }; + }; + + led { + led-2 { + /* LED7 GPIO conflicts with Touchscreen IRQ GPIO-H */ + status = "disabled"; + }; + }; +}; + +&media_blk_ctrl { + /* + * The Chefree CH101OLHLWH-002 panel requires 71.1 MHz LVDS clock. + * Set IMX8MP_VIDEO_PLL1 to 497.7 MHz , since 497.7 MHz / 7 = 71.1 MHz . + */ + assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, <0>, <497700000>; +}; + +&touch_lvds { + pinctrl-0 = <&pinctrl_dhcom_b &pinctrl_dhcom_h>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-531-100-x21.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-531-100-x21.dtso new file mode 100644 index 0000000..64c730d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-531-100-x21.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2022-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + eeprom@0 { + compatible = "microchip,25aa010a", "atmel,at25"; + reg = <0>; + address-width = <8>; + pagesize = <16>; + size = <128>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c5 { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@56 { + compatible = "atmel,24c04"; + reg = <0x56>; + pagesize = <16>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-531-100-x22.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-531-100-x22.dtso new file mode 100644 index 0000000..d789bf0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-531-100-x22.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2022-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + eeprom@0 { + compatible = "microchip,25aa010a", "atmel,at25"; + reg = <0>; + address-width = <8>; + pagesize = <16>; + size = <128>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@56 { + compatible = "atmel,24c04"; + reg = <0x56>; + pagesize = <16>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-560-300-x12.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-560-300-x12.dtso new file mode 100644 index 0000000..8ca2bd5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2-overlay-560-300-x12.dtso @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2022-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx8mp-dhcom-overlay-panel-etm0700g0edh6.dtsi" +#include "imx8mp-pinfunc.h" + +&{/} { + led { + led-0 { + /* LED5 GPIO conflicts with Touchscreen IRQ GPIO-E */ + status = "disabled"; + }; + }; +}; + +&pinctrl_dhcom_e { + fsl,pins = < + /* GPIO_E */ + MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x40000000 + >; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index 3d18c96..12fcc8f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -152,7 +152,7 @@ }; }; -&i2c5 { +i2c_dhpdk_panel: &i2c5 { sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-505-200-x36-ch101olhlwh.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-505-200-x36-ch101olhlwh.dtso new file mode 100644 index 0000000..397fa17 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-505-200-x36-ch101olhlwh.dtso @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx8mp-dhcom-overlay-panel-lvds.dtsi" +#include "imx8mp-dhcom-overlay-panel-ch101olhlwh.dtsi" +#include "imx8mp-pinfunc.h" + +&{/} { + gpio-keys { + button-1 { + /* TA2 GPIO conflicts with Touchscreen RESET GPIO-B */ + status = "disabled"; + }; + + button-2 { + /* TA3 GPIO conflicts with Touchscreen IRQ GPIO-C */ + status = "disabled"; + }; + }; + + led { + led-2 { + /* LED2 GPIO conflicts with BL-ON1 GPIO-G */ + status = "disabled"; + }; + }; +}; + +&media_blk_ctrl { + /* + * The Chefree CH101OLHLWH-002 panel requires 71.1 MHz LVDS clock. + * Set IMX8MP_VIDEO_PLL1 to 497.7 MHz , since 497.7 MHz / 7 = 71.1 MHz . + */ + assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, <0>, <497700000>; +}; + +&pinctrl_dhcom_c { + fsl,pins = < + /* GPIO_C */ + MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x40000000 + >; +}; + +&touch_lvds { + pinctrl-0 = <&pinctrl_dhcom_b &pinctrl_dhcom_c>; + pinctrl-names = "default"; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-531-100-x40.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-531-100-x40.dtso new file mode 100644 index 0000000..a319f0d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-531-100-x40.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + eeprom@0 { + compatible = "microchip,25aa010a", "atmel,at25"; + reg = <0>; + address-width = <8>; + pagesize = <16>; + size = <128>; + spi-max-frequency = <5000000>; + }; +}; + +&i2cmuxed0 { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@56 { + compatible = "atmel,24c04"; + reg = <0x56>; + pagesize = <16>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-531-100-x41.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-531-100-x41.dtso new file mode 100644 index 0000000..aaddcc8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-531-100-x41.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + eeprom@0 { + compatible = "microchip,25aa010a", "atmel,at25"; + reg = <0>; + address-width = <8>; + pagesize = <16>; + size = <128>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@56 { + compatible = "atmel,24c04"; + reg = <0x56>; + pagesize = <16>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-560-300-x36.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-560-300-x36.dtso new file mode 100644 index 0000000..8e9fba9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-560-300-x36.dtso @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx8mp-dhcom-overlay-panel-etm0700g0edh6.dtsi" + +&{/} { + gpio-keys { + button-3 { + /* TA4 GPIO conflicts with Touchscreen IRQ GPIO-E */ + status = "disabled"; + }; + }; + + led { + led-2 { + /* LED2 GPIO conflicts with BL-ON1 GPIO-G */ + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-732-100-x36.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-732-100-x36.dtso new file mode 100644 index 0000000..a527b7a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-732-100-x36.dtso @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx8mp-dhcom-overlay-panel-clock.dtsi" + +&lcdif1 { + status = "okay"; +}; + +&mipi_dsi { + samsung,burst-clock-frequency = <1000000000>; + status = "okay"; +}; + +&tc_bridge { + assigned-clock-rates = <26000000>, <26000000>, <416000000>; + toshiba,hpd-pin = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + + endpoint { + toshiba,pre-emphasis = /bits/ 8 <1 1>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-ea-murata-2ae-x20.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-ea-murata-2ae-x20.dtso new file mode 100644 index 0000000..92ed69b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-ea-murata-2ae-x20.dtso @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include +#include + +/* This DTO requires HI00106 SoM variant. */ + +&{/} { + led { + led-0 { + /* LED0 GPIO conflicts with #SDIO_RST GPIO-D */ + status = "disabled"; + }; + }; +}; + +&uart3 { + assigned-clocks = <&clk IMX8MP_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + assigned-clock-rates = <80000000>; + + bluetooth { + compatible = "cypress,cyw4373a0-bt"; + max-speed = <4000000>; + }; +}; + +/* SD slot */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + broken-cd; + cap-power-off-card; + keep-power-in-suspend; + non-removable; + vmmc-supply = <&buck4>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { /* muRata 2AE */ + compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + /* + * The "host-wake" interrupt output is by default not + * connected to the SoC, but can be connected on to + * SoC pin on the carrier board. + */ + reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* GPIO D */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x29.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x29.dtso new file mode 100644 index 0000000..44cf737 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x29.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640.dtsi" + +&mipi_csi_1 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_csi0_ep: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ov5640 { + powerdown-gpios = <&csi2exp 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&csi2exp 0 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x31.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x31.dtso new file mode 100644 index 0000000..f13c254 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640-x31.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640.dtsi" + +&mipi_csi_0 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_csi0_ep: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ov5640 { + powerdown-gpios = <&csi2exp 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&csi2exp 3 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640.dtsi new file mode 100644 index 0000000..4e56547 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3-overlay-nxp-spf-29853-c1-ov5640.dtsi @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ + +#include +#include + +&{/} { + camera0_1v5_pwr: regulator-camera0-1v5 { + compatible = "regulator-fixed"; + regulator-name = "camera0-1v5-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + camera0_1v8_pwr: regulator-camera0-1v8 { + compatible = "regulator-fixed"; + regulator-name = "camera0-1v8-reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + camera0_2v8_pwr: regulator-camera0-2v8 { + compatible = "regulator-fixed"; + regulator-name = "camera0-2v8-reg"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; +}; + +&i2cmuxed0 { + #address-cells = <1>; + #size-cells = <0>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&clk IMX8MP_CLK_CLKOUT1>; + clock-names = "xclk"; + assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>, + <&clk IMX8MP_CLK_CLKOUT1>; + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + assigned-clock-rates = <24000000>, <24000000>; + AVDD-supply = <&camera0_2v8_pwr>; + DOVDD-supply = <&camera0_1v8_pwr>; + DVDD-supply = <&camera0_1v5_pwr>; + + port { + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi0_ep>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&isi_0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts index 6ad824a..a6a8262 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts @@ -165,7 +165,7 @@ #address-cells = <1>; #size-cells = <0>; - i2cmuxed0: i2c@0 { + i2c_dhpdk_panel: i2cmuxed0: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtso new file mode 100644 index 0000000..34b060c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx-overlay-626-100-x2-ch101olhlwh.dtso @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include "imx8mp-dhcom-overlay-panel-dpi.dtsi" +#include "imx8mp-dhcom-overlay-panel-ch101olhlwh.dtsi" +#include "imx8mp-pinfunc.h" + +&{/} { + lvds-encoder { + compatible = "onnn,fin3385", "lvds-encoder"; + pclk-sample = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_bridge_in: endpoint { + remote-endpoint = <&tc_bridge_out>; + }; + }; + + port@1 { + reg = <1>; + + lvds_bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&mipi_dsi { + /* + * This is DSIM PLL frequency, DSI HS clock lane frequency + * is half of the "samsung,burst-clock-frequency" value. + */ + samsung,burst-clock-frequency = <900000000>; +}; + +&panel_in { + remote-endpoint = <&lvds_bridge_out>; +}; + +&tc_bridge_out { + remote-endpoint = <&lvds_bridge_in>; +}; + +&touch_lvds { + pinctrl-0 = <&pinctrl_dhcom_b &pinctrl_dhcom_h>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; +}; + +&iomuxc { + /* + * The following DHCOM GPIOs are used on this board. + * Therefore, they have been removed from the list below. + * B: Touch controller #RESET + * H: Touch controller IRQ + * I: Yellow led + */ + pinctrl-0 = <&pinctrl_dhcom_a &pinctrl_dhcom_c &pinctrl_dhcom_d + &pinctrl_dhcom_e &pinctrl_dhcom_f &pinctrl_dhcom_g + &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l + &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o + &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r + &pinctrl_dhcom_s &pinctrl_dhcom_int>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts index 703cf0f..ac17976 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts @@ -114,6 +114,9 @@ status = "disabled"; }; +i2c_dhpdk_panel: &i2c5 { +}; + &irqsteer_hdmi { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som-overlay-eth1xfast.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som-overlay-eth1xfast.dtso new file mode 100644 index 0000000..49cbf3e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som-overlay-eth1xfast.dtso @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ +/dts-v1/; +/plugin/; + +#include + +&eqos { /* First ethernet */ + pinctrl-0 = <&pinctrl_eqos_rmii>; + phy-handle = <ðphy0f>; + phy-mode = "rmii"; + + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, + <&clk IMX8MP_SYS_PLL2_100M>, + <&clk IMX8MP_SYS_PLL2_50M>; + assigned-clock-rates = <0>, <100000000>, <50000000>; +}; + +ðphy0g { /* Micrel KSZ9131RNXI */ + status = "disabled"; +}; + +ðphy0f { /* SMSC LAN8740Ai */ + status = "okay"; +}; + +&fec { /* Second ethernet -- HS connector not populated on 1x RMII PHY SoM */ + status = "disabled"; +}; + +/* No HS connector on this SoM variant, so no HDMI, PCIe and only USB HS. */ + +&hdmi_blk_ctrl { + status = "disabled"; +}; + +&hdmi_pvi { + status = "disabled"; +}; + +&hdmi_tx { + status = "disabled"; +}; + +&hdmi_tx_phy { + status = "disabled"; +}; + +&irqsteer_hdmi { + status = "disabled"; +}; + +&lcdif3 { + status = "disabled"; +}; + +&pcie_phy { + status = "disabled"; +}; + +&pcie { + status = "disabled"; +}; + +/* No WiFi/BT chipset on this SoM variant. */ +&uart2 { + bluetooth { + status = "disabled"; + }; +}; + +&usb_dwc3_0 { + maximum-speed = "high-speed"; +}; + +&usb_dwc3_1 { + maximum-speed = "high-speed"; +}; + +/* No WiFi/BT chipset on this SoM variant. */ +&usdhc1 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som-overlay-eth2xfast.dtso b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som-overlay-eth2xfast.dtso new file mode 100644 index 0000000..e773a75 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som-overlay-eth2xfast.dtso @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2023-2026 Marek Vasut + */ +#include "imx8mp-dhcom-som-overlay-eth1xfast.dtso" + +/* Dual RMII 100/Full Fast ethernet on this SoM variant. */ + +ðphy1f { /* SMSC LAN8740Ai */ + status = "okay"; +}; + +&fec { /* Second ethernet */ + pinctrl-0 = <&pinctrl_fec_rmii>; + phy-handle = <ðphy1f>; + phy-mode = "rmii"; + status = "okay"; + + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, + <&clk IMX8MP_SYS_PLL2_100M>, + <&clk IMX8MP_SYS_PLL2_50M>, + <&clk IMX8MP_SYS_PLL2_50M>; + assigned-clock-rates = <0>, <100000000>, <50000000>, <0>; +}; + +/* Resistive touch controller not populated on this one SoM variant. */ +&touch_som { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index 0a6a606..fdb5960 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2021-2022 Marek Vasut + * Copyright (C) 2021-2026 Marek Vasut */ #include "imx8mp.dtsi" @@ -398,7 +398,7 @@ }; }; - touchscreen@49 { + touch_som: touchscreen@49 { compatible = "ti,tsc2004"; reg = <0x49>; interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index d0a2bd9..a7f3acd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -770,11 +770,12 @@ &pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie0>; vpcie3v3aux-supply = <®_pcie0>; supports-clkreq; - status = "okay"; + status = "disabled"; }; &pcie0_ep { @@ -783,6 +784,10 @@ status = "disabled"; }; +&pcie0_port0 { + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; @@ -870,7 +875,7 @@ status = "okay"; }; -&usdhc1 { +m2_usdhc: &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts index 0924ac5..29ce863 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts @@ -49,7 +49,9 @@ reg_vcc_panel: regulator-vcc-panel { compatible = "regulator-fixed"; - gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vcc_panel>; + gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; @@ -63,7 +65,7 @@ eeram@0 { compatible = "microchip,48l640"; reg = <0>; - spi-max-frequency = <20000000>; + spi-max-frequency = <16000000>; }; }; @@ -172,7 +174,7 @@ &gpio5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio5>; - gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "PWM_2", + gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "VCC_PANEL_EN", "PWM_1", "PWM_0", "SPI_A_SCK", "CAN_ADDR1", "CAN_ADDR0", "SPI_A_CS0", "SPI_B_SCK", "SPI_B_SDO", "SPI_B_SDI", "SPI_B_CS0", "I2C_A_SCL", "I2C_A_SDA", @@ -329,4 +331,10 @@ MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x46 /* CAN_ADR1 */ >; }; + + pinctrl_reg_vcc_panel: regvccpanelgrp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x46 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi index bc1a261..ea69c63 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi @@ -311,7 +311,6 @@ regulator-name = "NVCC_SD (LDO5)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; }; }; @@ -815,7 +814,7 @@ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 /* SDIO_A_D1 */ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 /* SDIO_A_D2 */ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 /* SDIO_A_D3 */ - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x400001d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0 >; }; @@ -827,7 +826,7 @@ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 /* SDIO_A_D1 */ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 /* SDIO_A_D2 */ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 /* SDIO_A_D3 */ - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x400001d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0 >; }; @@ -839,7 +838,7 @@ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 /* SDIO_A_D1 */ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 /* SDIO_A_D2 */ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 /* SDIO_A_D3 */ - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x400001d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 0fe52c7..4efdc6b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -38,6 +38,18 @@ #cooling-cells = <2>; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + panel_lvds1: panel-lvds1 { /* compatible panel in overlay */ backlight = <&backlight_lvds1>; @@ -126,6 +138,13 @@ regulator-name = "VCC_1V8_EXP_CON"; }; + sound-hdmi { + compatible = "fsl,imx-audio-hdmi"; + model = "audio-hdmi"; + audio-cpu = <&aud2htx>; + hdmi-out; + }; + thermal-zones { soc-thermal { trips { @@ -146,6 +165,10 @@ }; }; +&aud2htx { + status = "okay"; +}; + /* TPM */ &ecspi1 { #address-cells = <1>; @@ -201,6 +224,32 @@ status = "okay"; }; +&hdmi_pai { + status = "okay"; +}; + +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; @@ -244,6 +293,10 @@ scl-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; +&lcdif3 { + status = "okay"; +}; + &ldb_lvds_ch1 { remote-endpoint = <&panel1_in>; }; @@ -444,6 +497,15 @@ >; }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x19 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 890d1e5..6b0f944 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -609,6 +609,9 @@ reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; iov-supply = <®_vcc_1v8>; ldoin-supply = <®_vcc_3v3>; + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; }; se97_1c: temperature-sensor@1c { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso index c6fc5d5..23e4bf6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso @@ -17,6 +17,7 @@ panel { compatible = "boe,av101hdt-a10"; + backlight = <&backlight>; enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&pinctrl_panel>; pinctrl-names = "default"; @@ -40,7 +41,30 @@ }; }; +&i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + backlight: backlight@6f { + compatible = "maxim,max25014"; + reg = <0x6f>; + default-brightness = <50>; + enable-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + maxim,iset = <7>; + maxim,strings = <1 1 1 0>; + }; +}; + &iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + pinctrl_panel: panelgrp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso index 3eb665c..0b969c8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso @@ -16,6 +16,7 @@ panel { compatible = "boe,av123z7m-n17"; + backlight = <&backlight>; enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&pinctrl_panel>; pinctrl-names = "default"; @@ -91,10 +92,26 @@ }; }; - /* max25014 @ 0x6f */ + backlight: backlight@6f { + compatible = "maxim,max25014"; + reg = <0x6f>; + default-brightness = <50>; + enable-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + maxim,iset = <7>; + maxim,strings = <1 1 1 1>; + }; }; &iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + pinctrl_lvds_bridge: lvdsbridgegrp { fsl,pins = < MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-zinnia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-zinnia.dts new file mode 100644 index 0000000..e78b25d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-zinnia.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus + * https://www.toradex.com/products/carrier-board/zinnia-carrier-board + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-nonwifi.dtsi" +#include "imx8mp-verdin-zinnia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus on Zinnia"; + compatible = "toradex,verdin-imx8mp-nonwifi-zinnia", + "toradex,verdin-imx8mp-nonwifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-zinnia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-zinnia.dts new file mode 100644 index 0000000..85eb565 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-zinnia.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus + * https://www.toradex.com/products/carrier-board/zinnia-carrier-board + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-wifi.dtsi" +#include "imx8mp-verdin-zinnia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus WB on Zinnia"; + compatible = "toradex,verdin-imx8mp-wifi-zinnia", + "toradex,verdin-imx8mp-wifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-zinnia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-zinnia.dtsi new file mode 100644 index 0000000..6beb2f2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-zinnia.dtsi @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Common dtsi for Verdin IMX8MP SoM on Zinnia carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus + * https://www.toradex.com/products/carrier-board/zinnia-carrier-board + */ + +#include +#include + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_zinnia_leds>; + + /* LED1 Red - SODIMM 48 - LED1_R */ + led-1 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + }; + + /* LED1 Blue - SODIMM 46 - LED1_B */ + led-2 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&gpio5 01 GPIO_ACTIVE_HIGH>; + }; + + /* LED3 Red - SODIMM 44 - LED3_R */ + led-3 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <3>; + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + }; + + /* LED3 Green - SODIMM 54 - LED3_G */ + led-4 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <3>; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + /* LED3 Blue - SODIMM 36 - LED3_B */ + led-5 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <3>; + gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>; + }; + + /* LED4 Red - SODIMM 34 - LED4_R */ + led-6 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <4>; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + }; + + /* LED4 Green - SODIMM 32 - LED4_G */ + led-7 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <4>; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + }; + + /* LED4 Blue - SODIMM 30 - LED4_B */ + led-8 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <4>; + gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; + }; + }; + + zinnia-1v8-voltage { + compatible = "voltage-divider"; + full-ohms = <39000>; /* 12k + 27k */ + /* Verdin ADC_4 */ + io-channels = <&verdin_som_adc 4>; + output-ohms = <27000>; + }; + + zinnia-3v3-voltage { + compatible = "voltage-divider"; + full-ohms = <54000>; /* 27k + 27k */ + /* Verdin ADC_3 */ + io-channels = <&verdin_som_adc 5>; + output-ohms = <27000>; + }; + + zinnia-5v-voltage { + compatible = "voltage-divider"; + full-ohms = <39000>; /* 27k + 12k */ + /* Verdin ADC_2 */ + io-channels = <&verdin_som_adc 6>; + output-ohms = <12000>; + }; + + /* Zinnia Power Supply Input Voltage */ + zinnia-input-voltage { + compatible = "voltage-divider"; + full-ohms = <204700>; /* 200k + 4.7k */ + /* Verdin ADC_1 */ + io-channels = <&verdin_som_adc 7>; + output-ohms = <4700>; + }; +}; + +/* Verdin SPI_1 */ +&ecspi1 { + pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_uart2_cts_gpio>; + cs-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>, <&gpio5 9 GPIO_ACTIVE_LOW>; + + status = "okay"; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + spi-max-frequency = <18500000>; + }; +}; + +/* EEPROM on Zinnia */ +&eeprom_carrier_board { + status = "okay"; +}; + +/* Verdin ETH_1 */ +&eqos { + status = "okay"; +}; + +/* Verdin ETH_2 */ +&fec { + phy-handle = <ðphy2>; + phy-mode = "rgmii-id"; + + status = "okay"; +}; + +&verdin_eth2_mdio { + ethphy2: ethernet-phy@2 { + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + }; +}; + +/* Verdin CAN_1 */ +&flexcan1 { + status = "okay"; +}; + +&gpio1 { + gpio-line-names = + "DO1_EN", /* 0 */ /* SODIMM 206 */ + "DI1_EN", /* SODIMM 208 */ + "", + "", + "", + "DI1_RB", /* SODIMM 210 */ + "DO2_EN", /* SODIMM 212 */ + "DI2_RB", /* SODIMM 216 */ + "DI2_EN", /* SODIMM 218 */ + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +&gpio2 { + gpio-line-names = + "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; /* 20 */ +}; + +&gpio3 { + gpio-line-names = + "", /* 0 */ + "", + "", + "", + "", + "", + "DI3_RB", /* SODIMM 56 */ + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +&gpio4 { + gpio-line-names = + "", /* 0 */ + "DI3_EN", /* SODIMM 222 */ + "", + "DO3_EN", /* SODIMM 220 */ + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 30 */ + ""; +}; + +&gpio5 { + gpio-line-names = + "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +/* Temperature sensor on Zinnia */ +&hwmon_temp { + compatible = "ti,tmp1075"; + + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart2 { + pinctrl-0 = <&pinctrl_uart2>, <&pinctrl_uart2_rts>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usb3_0 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usb3_1 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>, + <&pinctrl_gpio2>, + <&pinctrl_gpio3>, + <&pinctrl_gpio4>, + <&pinctrl_gpio5>, + <&pinctrl_gpio6>, + <&pinctrl_gpio7>, + <&pinctrl_gpio8>, + <&pinctrl_qspi1_io0_gpio>; + + pinctrl_uart2_cts_gpio: gpio2io6grp { + fsl,pins = ; /* SODIMM 143 */ + }; + + pinctrl_qspi1_io0_gpio: gpio3io6grp { + fsl,pins = ; /* SODIMM 56 */ + }; + + pinctrl_zinnia_leds: zinnialedsgrp { + fsl,pins = + , /* SODIMM 30 */ + , /* SODIMM 32 */ + , /* SODIMM 34 */ + , /* SODIMM 36 */ + , /* SODIMM 44 */ + , /* SODIMM 46 */ + , /* SODIMM 48 */ + ; /* SODIMM 54 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index d31f808..9fee2cf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -846,7 +846,7 @@ /* Verdin UART_2 */ &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; + pinctrl-0 = <&pinctrl_uart2>, <&pinctrl_uart2_cts>, <&pinctrl_uart2_rts>; uart-has-rtscts; }; @@ -1277,10 +1277,18 @@ ; /* SODIMM 131 */ }; + pinctrl_uart2_cts: uart2ctsgrp { + fsl,pins = + ; /* SODIMM 143 */ + }; + + pinctrl_uart2_rts: uart2rtsgrp { + fsl,pins = + ; /* SODIMM 141 */ + }; + pinctrl_uart2: uart2grp { fsl,pins = - , /* SODIMM 143 */ - , /* SODIMM 141 */ , /* SODIMM 137 */ ; /* SODIMM 139 */ }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 90d7bb8..5ce2825 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -2265,6 +2265,17 @@ phys = <&pcie_phy>; phy-names = "pcie-phy"; status = "disabled"; + + pcie0_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_ep: pcie_ep: pcie-ep@33800000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index d48f901..e7d87ea 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -369,6 +369,7 @@ &pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, <&pcie0_refclk>, @@ -389,9 +390,14 @@ status = "disabled"; }; +&pcie0_port0 { + reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; +}; + &pcie1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie1>; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, <&pcie0_refclk>, @@ -414,6 +420,10 @@ status = "disabled"; }; +&pcie1_port0 { + reset-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; +}; + &pgc_gpu { power-supply = <&sw1a_reg>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 6a25e21..e60872a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1768,6 +1768,17 @@ assigned-clock-rates = <250000000>, <100000000>, <10000000>; status = "disabled"; + + pcie0_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_ep: pcie-ep@33800000 { @@ -1846,6 +1857,17 @@ assigned-clock-rates = <250000000>, <100000000>, <10000000>; status = "disabled"; + + pcie1_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_ep: pcie-ep@33c00000 { diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 011a89d..f706c86 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -810,6 +810,7 @@ phy-names = "pcie-phy"; pinctrl-0 = <&pinctrl_pciea>; pinctrl-names = "default"; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pciea>; vpcie3v3aux-supply = <®_pciea>; @@ -817,15 +818,24 @@ status = "okay"; }; +&pciea_port0 { + reset-gpios = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>; +}; + &pcieb { phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>; phy-names = "pcie-phy"; pinctrl-0 = <&pinctrl_pcieb>; pinctrl-names = "default"; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>; status = "disabled"; }; +&pcieb_port0 { + reset-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>; +}; + &qm_pwm_lvds0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm_lvds0>; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi index f2c94cd..2e4fbfe 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi @@ -41,6 +41,17 @@ power-domains = <&pd IMX_SC_R_PCIE_A>; fsl,max-link-speed = <3>; status = "disabled"; + + pciea_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_ep: pciea_ep: pcie-ep@5f000000 { @@ -91,6 +102,17 @@ power-domains = <&pd IMX_SC_R_PCIE_B>; fsl,max-link-speed = <3>; status = "disabled"; + + pcieb_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; sata: sata@5f020000 { diff --git a/arch/arm64/boot/dts/freescale/imx8qm-tqma8qm-mba8x.dts b/arch/arm64/boot/dts/freescale/imx8qm-tqma8qm-mba8x.dts new file mode 100644 index 0000000..ab3b244 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-tqma8qm-mba8x.dts @@ -0,0 +1,871 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2019-2026 TQ-Systems GmbH , + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; + +#include +#include +#include +#include +#include + +#include "imx8qm-tqma8qm.dtsi" + +/ { + model = "TQ-Systems i.MX8QM TQMa8QM on MBa8x"; + compatible = "tq,imx8qm-tqma8qm-mba8x", "tq,imx8qm-tqma8qm", "fsl,imx8qm"; + + adc { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>; + }; + + aliases { + rtc0 = &pcf85063; + rtc1 = &rtc; + }; + + chosen { + stdout-path = &lpuart0; + }; + + + clk_xtal25: clk-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + switch-1 { + label = "SWITCH_A"; + linux,code = ; + gpios = <&lsio_gpio2 11 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + switch-2 { + label = "SWITCH_B"; + linux,code = ; + gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioled>; + + user-led0 { + color = ; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user-led1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwmfan>; + fan-supply = <®_pwm_fan>; + #cooling-cells = <2>; + /* typical 25 kHz -> 40.000 nsec */ + pwms = <&lsio_pwm3 0 40000 PWM_POLARITY_INVERTED>; + cooling-levels = <0 32 64 128 196 240>; + pulses-per-revolution = <2>; + interrupt-parent = <&lsio_gpio2>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + }; + + reg_mba8x_12v: regulator-mba8x-12v { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_mba8x_12v>; + regulator-name = "MBa8x-V12"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + gpio = <&lsio_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + reg_mba8x_v3v3: regulator-mba8x-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_pwm_fan: regulator-pwm-fan { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regpwmfan>; + regulator-name = "FAN_PWR"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&lsio_gpio2 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_mba8x_12v>; + }; + + reg_usb_phy: regulator-usb-phy { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "usb-phy-dummy"; + }; + + reg_v1v5_pcie: regulator-v1v5-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_pcie_v1v5>; + regulator-name = "V_1V5_MPCIE"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <®_mba8x_v3v3>; + enable-active-high; + gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; + + reg_v1v8: regulator-v1v8 { + compatible = "regulator-fixed"; + regulator-name = "MBa8x-V1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_v3v3_pcie: regulator-v3v3-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_pcie_v3v3>; + regulator-name = "V_3V3_MPCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_mba8x_v3v3>; + enable-active-high; + gpio = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; + + reg_v3v3_sd: regulator-v3v3-sd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_v3v3_sd>; + regulator-name = "V3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_mba8x_v3v3>; + gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + off-on-delay-us = <200000>; + }; + + reg_vref_v1v8: regulator-vref-v1v8 { + compatible = "regulator-fixed"; + regulator-name = "VREF_V1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * global autoconfigured region for contiguous allocations + * must not exceed memory size and region + */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x3c000000>; + alloc-ranges = <0 0x96000000 0 0x3c000000>; + linux,cma-default; + }; + + decoder_boot: decoder-boot@84000000 { + reg = <0 0x84000000 0 0x2000000>; + no-map; + }; + + encoder1_boot: encoder1-boot@86000000 { + reg = <0 0x86000000 0 0x200000>; + no-map; + }; + + encoder2_boot: encoder2-boot@86200000 { + reg = <0 0x86200000 0 0x200000>; + no-map; + }; + + decoder_rpc: decoder-rpc@92000000 { + reg = <0 0x92000000 0 0x100000>; + no-map; + }; + + encoder1_rpc: encoder1-rpc@92100000 { + reg = <0 0x92100000 0 0x700000>; + no-map; + }; + + encoder2_rpc: encoder1-rpc@92800000 { + reg = <0 0x92800000 0 0x700000>; + no-map; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic3x04>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; + }; + + sound-hdmi { + compatible = "fsl,imx-audio-hdmi"; + model = "imx-audio-dp"; + audio-cpu = <&sai5>; + hdmi-out; + }; + + thermal-zones { + cpu0-thermal { + trips { + soc_active0_0: trip-active0 { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + + soc_active0_1: trip-active1 { + temperature = <48000>; + hysteresis = <3000>; + type = "active"; + }; + + soc_active0_2: trip-active2 { + temperature = <60000>; + hysteresis = <10000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&soc_active0_0>; + cooling-device = <&fan0 1 1>; + }; + + map2 { + trip = <&soc_active0_1>; + cooling-device = <&fan0 2 2>; + }; + + map3 { + trip = <&soc_active0_2>; + cooling-device = <&fan0 3 3>; + }; + }; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + nvmem-cells = <&fec_mac0>; + nvmem-cell-names = "mac-address"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ethphy0>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = ; + reset-gpios = <&lsio_gpio2 6 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&lsio_gpio2>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec2>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy3>; + nvmem-cells = <&fec_mac1>; + nvmem-cell-names = "mac-address"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ethphy3>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = ; + reset-gpios = <&lsio_gpio2 4 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&hsio_phy { + fsl,hsio-cfg = "pciea-pcieb-sata"; + fsl,refclk-pad-mode = "input"; + status = "okay"; +}; + +/* no refclock gating */ +&hsio_refa_clk { + compatible = "fixed-factor-clock"; + clocks = <&pcieclk 0>; + clock-div = <1>; + clock-mult = <1>; + /delete-property/ enable-gpios; +}; + +&hsio_refb_clk { + compatible = "fixed-factor-clock"; + clocks = <&pcieclk 0>; + clock-div = <1>; + clock-mult = <1>; + /delete-property/ enable-gpios; +}; + +&i2c1 { + tlv320aic3x04: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>; + ldoin-supply = <®_mba8x_v3v3>; + iov-supply = <®_v1v8>; + }; + + sensor1: temperature-sensor@1c { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1c>; + }; + + eeprom2: eeprom@54 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + vcc-supply = <®_mba8x_v3v3>; + }; + + pcieclk: clock-generator@68 { + compatible = "renesas,9fgv0441"; + reg = <0x68>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; +}; + +&lpspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi0 &pinctrl_lpspi0_cs>; + cs-gpios = <&lsio_gpio3 5 GPIO_ACTIVE_LOW>, <&lsio_gpio3 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&lpspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi1 &pinctrl_lpspi1_cs>; + cs-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>, <&lsio_gpio3 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&lpspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi2 &pinctrl_lpspi2_cs>; + cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>, <&lsio_gpio3 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&lpuart0 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&lpuart1 { + /* X62 pin header */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&lpuart2 { + /* mikroBUS */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; + status = "okay"; +}; + +&lsio_gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio2>; + gpio-line-names = "", "", "", "", + "", "PCIE0_DISABLE#", "", ""; + + pcie0-wdisable1-hog { + gpio-hog; + gpios = <5 0>; + output-high; + line-name = "PCIE0_DISABLE#"; + }; + + pcie-clk-pd-hog { + gpio-hog; + gpios = <10 0>; + output-high; + line-name = "PCIE_CLK_PD#"; + }; +}; + +&lsio_pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lsio_pwm3>; + status = "okay"; +}; + +&pciea { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pciea>; + phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>; + phy-names = "pcie-phy"; + reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcieb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcieb>; + phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>; + phy-names = "pcie-phy"; + reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + status = "okay"; +}; + +&sai5 { + status = "okay"; +}; + +&sai5_lpcg { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&usbphy1 { + phy-3p0-supply = <®_usb_phy>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + srp-disable; + hnp-disable; + adp-disable; + power-active-high; + over-current-active-low; + dr_mode = "otg"; + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&usbotg3 { + /* over-current disabled by default */ + status = "okay"; +}; + +&usbotg3_cdns3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&lsio_gpio2 7 GPIO_ACTIVE_LOW>; + vdd-supply = <®_mba8x_v3v3>; + }; + + hub_3_0: hub@2 { + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&lsio_gpio2 7 GPIO_ACTIVE_LOW>; + vdd-supply = <®_mba8x_v3v3>; + }; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_v3v3_sd>; + no-mmc; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + pinctrl_adc0: adc0grp { + fsl,pins = , + ; + }; + + pinctrl_ethphy0: ethphy0grp { + fsl,pins = , + ; + }; + + pinctrl_ethphy3: ethphy3grp { + fsl,pins = ; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_fec2: fec2grp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_flexcan1: flexcan0grp { + fsl,pins = , + ; + }; + + pinctrl_flexcan2: flexcan1grp { + fsl,pins = , + ; + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = , + ; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = /* GPIO0_05 on X62:26 */ + , + /* GPIO1_14 on X64:21 */ + , + /* GPIO1_15 on X64:23 */ + , + /* GPIO2_17 on X63:37 */ + , + /* GPIO2_21 on X63:39 */ + , + /* GPIO4_12 on X61:24 */ + , + /* GPIO4_11 on X61:26 */ + , + /* GPIO4_10 on X61:28 */ + , + /* GPIO4_09 on X61:30 */ + , + /* GPIO5_23 on X62:24 */ + , + /* GPIO5_24 on X61:15 */ + , + /* GPIO5_25 on X61:17 */ + , + /* GPIO5_26 on X61:19 */ + , + /* GPIO5_27 on X61:21 */ + , + /* GPIO5_28 on X61:23 */ + , + /* GPIO5_29 on X61:25 */ + ; + }; + + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = , + ; + }; + + pinctrl_gpioled: gpioledgrp { + fsl,pins = , + ; + }; + + pinctrl_lpspi0_cs: lpspi0csgrp { + fsl,pins = , + ; + }; + + pinctrl_lpspi0: lpspi0grp { + fsl,pins = , + , + ; + }; + + pinctrl_lpspi1_cs: lpspi1csgrp { + fsl,pins = , + ; + }; + + pinctrl_lpspi1: lpspi1grp { + fsl,pins = , + , + ; + }; + + pinctrl_lpspi2: lpspi2grp { + fsl,pins = , + , + ; + }; + + pinctrl_lpspi2_cs: lpspi2sgrp { + fsl,pins = , + ; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = , + , + , + ; + }; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = , + , + , + ; + }; + + pinctrl_lpuart2: lpuart2grp { + fsl,pins = , + ; + }; + + pinctrl_lsio_pwm3: lsiopwm3grp { + fsl,pins = ; + }; + + pinctrl_pciea: pcieagrp { + fsl,pins = , + , + ; + }; + + pinctrl_pcieb: pciebgrp { + fsl,pins = , + , + ; + }; + + pinctrl_pwmfan: pwmfangrp { + fsl,pins = ; + }; + + pinctrl_reg_mba8x_12v: regmba12vgrp { + fsl,pins = ; + }; + + pinctrl_reg_pcie_v1v5: regpcie1v5grp { + fsl,pins = ; + }; + + pinctrl_reg_pcie_v3v3: regpcie3v3grp { + fsl,pins = ; + }; + + pinctrl_regpwmfan: regpwmfangrp { + fsl,pins = ; + }; + + pinctrl_reg_v3v3_sd: regv3v3sdgrp { + fsl,pins = ; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = , + , + , + , + , + ; + }; + + pinctrl_usbhub: usbhubgrp { + fsl,pins = ; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = , + ; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = , + ; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-tqma8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-tqma8qm.dtsi new file mode 100644 index 0000000..f0e398e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-tqma8qm.dtsi @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2019-2026 TQ-Systems GmbH , + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include +#include +#include + +#include "imx8qm.dtsi" + +/ { + model = "TQ-Systems i.MX8QM TQMa8QM"; + compatible = "tq,imx8qm-tqma8qm", "fsl,imx8qm"; + + /* Due to missing workaround for ERR050104 */ + cpus { + /delete-node/ cpu-map; + /delete-node/ cpu@100; + /delete-node/ cpu@101; + }; + + memory@80000000 { + device_type = "memory"; + /* + * DRAM base addr, size : 1024 MiB DRAM + * should be corrected by bootloader + */ + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reg_tqma8x_v3v3: regulator-tqma8x-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* SW7 controlled by SCU */ + reg_1v8_io1: regulator-v1v8-io1 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_IO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO4 controlled by SCU */ + reg_3v3_emmc: regulator-v3v3-emmc { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_EMMC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&acm { + status = "okay"; +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0>; + vref-supply = <®_vref_v1v8>; + status = "okay"; +}; + +/* TQMa8QM only uses industrial grade, reduce trip points accordingly */ +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <100000>; +}; + +&cpu_alert1 { + temperature = <95000>; +}; + +&cpu_crit1 { + temperature = <100000>; +}; + +&gpu_alert0 { + temperature = <95000>; +}; + +&gpu_crit0 { + temperature = <100000>; +}; + +&gpu_alert1 { + temperature = <95000>; +}; + +&gpu_crit1 { + temperature = <100000>; +}; + +&drc_alert0 { + temperature = <95000>; +}; + +&drc_crit0 { + temperature = <100000>; +}; +/* end of temperature grade adjustments */ + +&flexspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <66000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + vcc-supply = <®_1v8_io1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-1 = <&pinctrl_lpi2c1gpio>; + scl-gpios = <&lsio_gpio0 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&lsio_gpio0 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + se97: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1b>; + }; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <7000>; + }; + + at24c02: eeprom@53 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + read-only; + vcc-supply = <®_tqma8x_v3v3>; + }; + + m24c64: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + vcc-supply = <®_tqma8x_v3v3>; + }; +}; + +&mu_m0 { + status = "okay"; +}; + +&mu1_m0 { + status = "okay"; +}; + +&mu2_m0 { + status = "okay"; +}; + +&thermal_zones { + /delete-node/ cpu1-thermal; + + pmic0-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + + trips { + pmic_alert0: trip0 { + temperature = <110000>; + hysteresis = <2000>; + type = "passive"; + }; + pmic_crit0: trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&pmic_alert0>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + vmmc-supply = <®_3v3_emmc>; + vqmmc-supply = <®_1v8_io1>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&vpu { + compatible = "nxp,imx8qm-vpu"; + status = "okay"; +}; + +&vpu_core0 { + memory-region = <&decoder_boot>, <&decoder_rpc>; + status = "okay"; +}; + +&vpu_core1 { + memory-region = <&encoder1_boot>, <&encoder1_rpc>; + status = "okay"; +}; + +&vpu_core2 { + memory-region = <&encoder2_boot>, <&encoder2_rpc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = , + ; + }; + + pinctrl_lpi2c1gpio: lpi2c1gpiogrp { + fsl,pins = , + ; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 623169f..2af32ec 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -730,6 +730,7 @@ phy-names = "pcie-phy"; pinctrl-0 = <&pinctrl_pcieb>; pinctrl-names = "default"; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcieb>; vpcie3v3aux-supply = <®_pcieb>; @@ -742,10 +743,13 @@ phy-names = "pcie-phy"; pinctrl-0 = <&pinctrl_pcieb>; pinctrl-names = "default"; - vpcie-supply = <®_pcieb>; status = "disabled"; }; +&pcieb_port0 { + reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>; +}; + &scu_key { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts index 290a49b..5dea66c 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts @@ -166,7 +166,7 @@ ptn5150_1: typec@1d { compatible = "nxp,ptn5150"; reg = <0x1d>; - int-gpios = <&gpiof 3 IRQ_TYPE_EDGE_FALLING>; + int-gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_typec1>; status = "disabled"; @@ -182,7 +182,7 @@ ptn5150_2: typec@3d { compatible = "nxp,ptn5150"; reg = <0x3d>; - int-gpios = <&gpiof 5 IRQ_TYPE_EDGE_FALLING>; + int-gpios = <&gpiof 5 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_typec2>; status = "disabled"; diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 1de3ad6..c6d1bb9 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -302,6 +302,7 @@ assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>; assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>; timeout-sec = <40>; + bootph-all; }; cgc1: clock-controller@292c0000 { @@ -858,6 +859,72 @@ dma-names = "rx", "tx"; status = "disabled"; }; + + isi: isi@2dac0000 { + compatible = "fsl,imx8ulp-isi"; + reg = <0x2dac0000 0x10000>; + interrupts = ; + clocks = <&pcc5 IMX8ULP_CLK_ISI>, + <&cgc2 IMX8ULP_CLK_LPAV_AXI_DIV>; + clock-names = "axi", "apb"; + power-domains = <&scmi_devpd IMX8ULP_PD_ISI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + isi_in: endpoint { + remote-endpoint = <&mipi_csi_out>; + }; + }; + }; + }; + + mipi_csi: csi@2daf0000 { + compatible = "fsl,imx8ulp-mipi-csi2"; + reg = <0x2daf0000 0x10000>, + <0x2dad0000 0x10000>; + clocks = <&pcc5 IMX8ULP_CLK_CSI>, + <&pcc5 IMX8ULP_CLK_CSI_CLK_ESC>, + <&pcc5 IMX8ULP_CLK_CSI_CLK_UI>, + <&pcc5 IMX8ULP_CLK_CSI_REGS>; + clock-names = "core", "esc", "ui", "pclk"; + assigned-clocks = <&pcc5 IMX8ULP_CLK_CSI>, + <&pcc5 IMX8ULP_CLK_CSI_CLK_ESC>, + <&pcc5 IMX8ULP_CLK_CSI_CLK_UI>, + <&pcc5 IMX8ULP_CLK_CSI_REGS>; + assigned-clock-parents = <&cgc2 IMX8ULP_CLK_PLL4_PFD1_DIV1>, + <&cgc2 IMX8ULP_CLK_PLL4_PFD1_DIV2>, + <&cgc2 IMX8ULP_CLK_PLL4_PFD0_DIV1>; + assigned-clock-rates = <200000000>, + <80000000>, + <100000000>, + <79200000>; + power-domains = <&scmi_devpd IMX8ULP_PD_MIPI_CSI>; + resets = <&pcc5 5>, /* PCC5_CSI_REGS_SWRST */ + <&pcc5 6>; /* PCC5_CSI_SWRST> */ + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi_out: endpoint { + remote-endpoint = <&isi_in>; + }; + }; + }; + }; }; gpiod: gpio@2e200000 { diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi index 47895ff..2415487 100644 --- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi @@ -631,12 +631,12 @@ */ pinctrl_atmel_adap: atmeladaptergrp { fsl,pins = , /* SODIMM 30 */ - ; /* SODIMM 28 */ + ; /* SODIMM 28 */ }; /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */ pinctrl_atmel_conn: atmelconnectorgrp { - fsl,pins = , /* SODIMM 107 */ + fsl,pins = , /* SODIMM 107 */ ; /* SODIMM 106 */ }; diff --git a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts index c083b97..5716feb 100644 --- a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts @@ -195,10 +195,12 @@ compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; - clock-frequency = <5000000>; ethphy1: ethernet-phy@1 { reg = <1>; + reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; realtek,clkout-disable; }; }; @@ -220,6 +222,9 @@ ethphy2: ethernet-phy@2 { reg = <2>; + reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; realtek,clkout-disable; }; }; @@ -587,6 +592,8 @@ }; &wdog3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; status = "okay"; }; @@ -948,4 +955,10 @@ MX91_PAD_SD3_DATA3__GPIO3_IO25 0x31e >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx91-93-phyboard-segin-peb-av-18.dtsi b/arch/arm64/boot/dts/freescale/imx91-93-phyboard-segin-peb-av-18.dtsi new file mode 100644 index 0000000..53d5cbc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx91-93-phyboard-segin-peb-av-18.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2026 PHYTEC Messtechnik GmbH + * + * Author: Florijan Plohl + */ + +#include +#include +#include + +/dts-v1/; +/plugin/; + +&{/} { + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <5>; + power-supply = <®_vcc_3v3_con>; + pwms = <&pwm7 0 5000000 0>; + }; + + panel { + compatible = "powertip,ph800480t032-zhc19"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel>; + + backlight = <&backlight>; + enable-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_vcc_3v3_con>; + + port { + panel_in: endpoint { + remote-endpoint = <&dpi_to_panel>; + }; + }; + }; + + pwm7: pwm-7 { + compatible = "pwm-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + #pwm-cells = <3>; + }; + + reg_vcc_3v3_con: regulator-vcc-3v3-con { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_CON"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + }; +}; + +&dpi_bridge { + status = "okay"; +}; + +&dpi_to_panel { + remote-endpoint = <&panel_in>; + bus-width = <18>; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + assigned-clocks = <&clk IMX93_CLK_VIDEO_PLL>; + assigned-clock-rates = <27272728>; + status = "okay"; +}; + +&lpi2c2 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@41 { + compatible = "ilitek,ili2130"; + reg = <0x41>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + wakeup-source; + }; +}; + +&media_blk_ctrl { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts new file mode 100644 index 0000000..ea8cf14 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts @@ -0,0 +1,435 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2026 NXP + */ + +/dts-v1/; + +#include +#include "imx91.dtsi" + +/ { + compatible = "fsl,imx91-9x9-qsb", "fsl,imx91"; + model = "NXP i.MX91 9x9 Quick Start Board"; + + aliases { + ethernet0 = &fec; + ethernet1 = &eqos; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + rtc0 = &bbnsm_rtc; + serial0 = &lpuart1; + }; + + chosen { + stdout-path = &lpuart1; + }; + + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + off-on-delay-us = <12000>; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x10000000>; + linux,cma-default; + }; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&eqos { + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + pinctrl-0 = <&pinctrl_eqos>; + pinctrl-names = "default"; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + realtek,clkout-disable; + }; + }; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX91_PAD_ENET1_MDC__ENET1_MDC 0x57e + MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e + MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e + MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e + MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x5fe + MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e + MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x57e + MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e + MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e + MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe + MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX91_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX91_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + MX91_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e + MX91_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e + >; + }; + + pinctrl_pcal6524: pcal6524grp { + fsl,pins = < + MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x31e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX91_PAD_UART1_RXD__LPUART1_RX 0x31e + MX91_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x1582 + MX91_PAD_SD1_CMD__USDHC1_CMD 0x1382 + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x1382 + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x1382 + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x1382 + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x1382 + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x1382 + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x1382 + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x1382 + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x1382 + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x1582 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x158e + MX91_PAD_SD1_CMD__USDHC1_CMD 0x138e + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x15fe + MX91_PAD_SD1_CMD__USDHC1_CMD 0x13fe + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX91_PAD_SD2_CD_B__GPIO3_IO0 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x1582 + MX91_PAD_SD2_CMD__USDHC2_CMD 0x1382 + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x1382 + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x1382 + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x1382 + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x1382 + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX91_PAD_SD2_CMD__USDHC2_CMD 0x138e + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x15fe + MX91_PAD_SD2_CMD__USDHC2_CMD 0x13fe + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e + >; + }; +}; + +&lpi2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-names = "default"; + status = "okay"; + + p3t1085: temperature-sensor@48 { + compatible = "nxp,p3t1085"; + reg = <0x48>; + }; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x50>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + + typec1_con: connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C"; + op-sink-microwatt = <15000000>; + power-role = "dual"; + self-powered; + sink-pdos = ; + source-pdos = ; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + }; + }; + + pcf2131: rtc@53 { + compatible = "nxp,pcf2131"; + reg = <0x53>; + interrupt-parent = <&pcal6524>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&lpi2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-names = "default"; + status = "okay"; + + pcal6524: gpio@22 { + compatible = "nxp,pcal6524"; + reg = <0x22>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + pinctrl-0 = <&pinctrl_pcal6524>; + pinctrl-names = "default"; + }; + + pmic@32 { + compatible = "nxp,pf9453"; + reg = <0x32>; + interrupt-parent = <&pcal6524>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1140000>; + regulator-min-microvolt = <1060000>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <610000>; + regulator-ramp-delay = <12500>; + }; + + buck3: BUCK3 { + regulator-name = "BUCK3"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3450000>; + regulator-min-microvolt = <1650000>; + }; + + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3450000>; + regulator-min-microvolt = <1650000>; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1650000>; + }; + + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1890000>; + regulator-min-microvolt = <760000>; + }; + + ldo_snvs: LDO-SNVS { + regulator-name = "LDO-SNVS"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1950000>; + regulator-min-microvolt = <1650000>; + }; + }; + }; +}; + +&lpuart1 { + pinctrl-0 = <&pinctrl_uart1>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg1 { + adp-disable; + disable-over-current; + dr_mode = "otg"; + hnp-disable; + srp-disable; + usb-role-switch; + samsung,picophy-dc-vol-level-adjust = <7>; + samsung,picophy-pre-emp-curr-control = <3>; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usdhc1 { + bus-width = <8>; + non-removable; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + fsl,tuning-step = <1>; + status = "okay"; +}; + +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + no-mmc; + no-sdio; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + vmmc-supply = <®_usdhc2_vmmc>; + fsl,tuning-step = <1>; + status = "okay"; +}; + +&wdog3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx91-phyboard-segin-peb-av-18.dtso b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin-peb-av-18.dtso new file mode 100644 index 0000000..35edf9b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin-peb-av-18.dtso @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2026 PHYTEC Messtechnik GmbH + * + * Author: Florijan Plohl + */ + +#include "imx91-pinfunc.h" +#include "imx91-93-phyboard-segin-peb-av-18.dtsi" + +&iomuxc { + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x57e + MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x51e + MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x51e + MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x51e + MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0 0x51e + MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1 0x51e + MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2 0x51e + MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3 0x51e + MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4 0x51e + MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5 0x51e + MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6 0x51e + MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7 0x51e + MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8 0x51e + MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9 0x51e + MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x51e + MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x51e + MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x51e + MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x51e + MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x51e + MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x51e + MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x51e + MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x51e + >; + }; + + pinctrl_panel: panelgrp { + fsl,pins = < + MX91_PAD_CCM_CLKO4__GPIO4_IO29 0x1133e + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX91_PAD_CCM_CLKO3__GPIO4_IO28 0x1133e + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX91_PAD_ENET1_MDIO__GPIO4_IO1 0x11e + MX91_PAD_ENET1_RD2__GPIO4_IO12 0x1133e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts index 7b18a58..022e9c6 100644 --- a/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts +++ b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts @@ -137,6 +137,24 @@ }; }; +&gpio1 { + gpio-line-names = "", "USER_LED", "I2C1_SCL", "I2C1_SDA"; +}; + +&gpio3 { + gpio-line-names = "SD1_nCD", "", "", "", "", + "", "", "SD1_nRESET"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "CAN_EN", "", "", "", + "", "", "", "RESET_PHY", "", + "", "RTC_nINT", "PMIC_IRQ_B"; +}; + /* CAN */ &flexcan1 { pinctrl-names = "default"; @@ -309,7 +327,7 @@ pinctrl_usdhc2_default: usdhc2grp { fsl,pins = < - MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX91_PAD_SD2_CLK__USDHC2_CLK 0x118e MX91_PAD_SD2_CMD__USDHC2_CMD 0x1382 MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x1386 MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e @@ -321,7 +339,7 @@ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < - MX91_PAD_SD2_CLK__USDHC2_CLK 0x159e + MX91_PAD_SD2_CLK__USDHC2_CLK 0x119e MX91_PAD_SD2_CMD__USDHC2_CMD 0x139e MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x138e MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e @@ -333,7 +351,7 @@ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < - MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX91_PAD_SD2_CLK__USDHC2_CLK 0x118e MX91_PAD_SD2_CMD__USDHC2_CMD 0x138e MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x139e MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x139e diff --git a/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi index 29a428a..8b8cb3d 100644 --- a/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi @@ -8,6 +8,7 @@ */ #include +#include #include "imx91.dtsi" @@ -88,6 +89,28 @@ }; }; +&gpio1 { + gpio-line-names = "", "USER_LED"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "I2C3_SDA", "I2C3_SCL"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "RESET_PHY", "", + "", "", "PMIC_IRQ_B"; +}; + /* I2C3 */ &lpi2c3 { clock-frequency = <400000>; @@ -138,6 +161,7 @@ regulator-min-microvolt = <1800000>; regulator-boot-on; regulator-always-on; + regulator-initial-mode = ; }; buck6: BUCK6 { @@ -192,6 +216,7 @@ bus-width = <8>; non-removable; no-1-8-v; + fsl,strobe-dll-delay-target = <1>; status = "okay"; }; @@ -218,7 +243,7 @@ MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x50e MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x50e MX91_PAD_ENET2_TD2__ENET2_TX_CLK2 0x4000050e - MX91_PAD_ENET2_RXC__GPIO4_IO23 0x51e + MX91_PAD_ENET2_RXC__GPIO4_IO23 0x502 >; }; @@ -250,7 +275,7 @@ pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX91_PAD_SD1_CLK__USDHC1_CLK 0x179e + MX91_PAD_SD1_CLK__USDHC1_CLK 0x119e MX91_PAD_SD1_CMD__USDHC1_CMD 0x1386 MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x1386 @@ -260,13 +285,13 @@ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x1386 MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x1386 MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x1386 - MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x159e >; }; pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < - MX91_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX91_PAD_SD1_CLK__USDHC1_CLK 0x11be MX91_PAD_SD1_CMD__USDHC1_CMD 0x139e MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x139e @@ -276,13 +301,13 @@ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x139e MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x139e MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x139e - MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x159e >; }; pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < - MX91_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX91_PAD_SD1_CLK__USDHC1_CLK 0x11be MX91_PAD_SD1_CMD__USDHC1_CMD 0x139e MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x139e MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x13be @@ -292,7 +317,7 @@ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x13be MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x13be MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x13be - MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x159e >; }; diff --git a/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts index afa39da..3f0fd32 100644 --- a/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts +++ b/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts @@ -90,6 +90,13 @@ regulator-max-microvolt = <1800000>; }; + reg_rgb_sel: regulator-rgb-enable { + compatible = "regulator-fixed"; + regulator-name = "RGBSEL"; + gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-vmmc-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -195,6 +202,7 @@ #gpio-cells = <2>; interrupt-parent = <&gpio1>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <®_rgb_sel>; }; pca6408_2: gpio@21 { @@ -204,6 +212,7 @@ #gpio-cells = <2>; interrupt-parent = <&gpio1>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <®_rgb_sel>; }; pca9534: gpio@22 { diff --git a/arch/arm64/boot/dts/freescale/imx91-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx91-var-som-symphony.dts new file mode 100644 index 0000000..c1e6c99 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx91-var-som-symphony.dts @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Variscite Symphony carrier board for VAR-SOM-MX91 + * + * Link: https://variscite.com/carrier-boards/symphony-board/ + * + * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/ + * + */ + +/dts-v1/; + +#include +#include "imx91-var-som.dtsi" + +/{ + model = "Variscite VAR-SOM-MX91 on Symphony evaluation board"; + compatible = "variscite,var-som-mx91-symphony", + "variscite,var-som-mx91", "fsl,imx91"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &pca9534; + gpio5 = &pca6408; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &lpuart1; + serial1 = &lpuart2; + serial2 = &lpuart3; + serial3 = &lpuart4; + serial4 = &lpuart5; + }; + + chosen { + stdout-path = &lpuart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-back { + label = "Back"; + gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-home { + label = "Home"; + gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-menu { + label = "Menu"; + gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-hearthbeat { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* + * Needed only for Symphony <= v1.5 + */ + reg_fec_phy: regulator-fec-phy { + compatible = "regulator-fixed"; + regulator-name = "fec-phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <20000>; + gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6408 6 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <20000>; + enable-active-high; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + ele_reserved: ele-reserved@87de0000 { + compatible = "shared-dma-pool"; + reg = <0 0x87de0000 0 0x100000>; + no-map; + }; + + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x80000000 0 0x40000000>; + reusable; + size = <0 0x10000000>; + linux,cma-default; + }; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +/* Use external instead of internal RTC*/ +&bbnsm_rtc { + status = "disabled"; +}; + +&eqos { + mdio { + ethphy1: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <5>; + eee-broken-1000t; + reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + vddio-supply = <&vddio1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + }; + + vddio1: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +ðphy0 { + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + }; +}; + +&fec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; + /* + * The required RGMII TX and RX 2ns delays are implemented directly + * in hardware via passive delay elements on the SOM PCB. + * No delay configuration is needed in software via PHY driver. + */ + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + phy-supply = <®_fec_phy>; + status = "okay"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&lpi2c1 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-1 = <&pinctrl_lpi2c1_gpio>; + pinctrl-2 = <&pinctrl_lpi2c1_gpio>; + scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pca9534: gpio@20 { + compatible = "nxp,pca9534"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9534>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + + pca6408: gpio@21 { + compatible = "nxp,pcal6408"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca6408>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + + tpm-enable-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "tpm_en"; + }; + + /* RGB_SEL */ + lvds-brg-enable-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "lvds_brg_en"; + }; + }; + + /* USB Type-C Controller */ + ptn5150: typec@3d { + compatible = "nxp,ptn5150"; + reg = <0x3d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ptn5150>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_NONE>; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + + st33ktpm2xi2c: tpm@2e { + compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + }; + + /* Capacitive touch controller */ + ft5x06_ts: touchscreen@38 { + compatible = "edt,edt-ft5206"; + reg = <0x38>; + interrupt-parent = <&pca6408>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-inverted-y; + wakeup-source; + }; + + /* DS1337 RTC module */ + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +/* pins conflict */ +&lpspi8 { + status = "disabled"; +}; + +/* Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&tpm4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_tpm4>; + pinctrl-1 = <&pinctrl_tpm4_sleep>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* SD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; + bus-width = <4>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + no-mmc; + no-sdio; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +/* Watchdog */ +&wdog3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x57e + MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x57e + MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x57e + MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x57e + MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x5fe + MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x57e + MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x57e + MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x57e + MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x57e + MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x57e + MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x5fe + MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_fec_sleep: fecsleepgrp { + fsl,pins = < + MX91_PAD_ENET2_RD0__GPIO4_IO24 0x51e + MX91_PAD_ENET2_RD1__GPIO4_IO25 0x51e + MX91_PAD_ENET2_RD2__GPIO4_IO26 0x51e + MX91_PAD_ENET2_RD3__GPIO4_IO27 0x51e + MX91_PAD_ENET2_RXC__GPIO4_IO23 0x51e + MX91_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e + MX91_PAD_ENET2_TD0__GPIO4_IO19 0x51e + MX91_PAD_ENET2_TD1__GPIO4_IO18 0x51e + MX91_PAD_ENET2_TD2__GPIO4_IO17 0x51e + MX91_PAD_ENET2_TD3__GPIO4_IO16 0x51e + MX91_PAD_ENET2_TXC__GPIO4_IO21 0x51e + MX91_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX91_PAD_PDM_CLK__CAN1_TX 0x139e + MX91_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX91_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX91_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c1_gpio: lpi2c1gpiogrp { + fsl,pins = < + MX91_PAD_I2C1_SCL__GPIO1_IO0 0x31e + MX91_PAD_I2C1_SDA__GPIO1_IO1 0x31e + >; + }; + + pinctrl_pca6408: pca6408grp { + fsl,pins = < + MX91_PAD_GPIO_IO04__GPIO2_IO4 0x31e + >; + }; + + pinctrl_pca9534: pca9534grp { + fsl,pins = < + MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + + pinctrl_ptn5150: ptn5150grp { + fsl,pins = < + MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX91_PAD_UART1_RXD__LPUART1_RX 0x31e + MX91_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_tpm4: tpm4grp { + fsl,pins = < + MX91_PAD_GPIO_IO05__TPM4_CH0 0x51e + >; + }; + + pinctrl_tpm4_sleep: tpm4sleepgrp { + fsl,pins = < + MX91_PAD_GPIO_IO05__GPIO2_IO5 0x51e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x1582 + MX91_PAD_SD2_CMD__USDHC2_CMD 0x1382 + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x1382 + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x1382 + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x1382 + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x1382 + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX91_PAD_SD2_CMD__USDHC2_CMD 0x138e + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x15fe + MX91_PAD_SD2_CMD__USDHC2_CMD 0x13fe + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_sleep: usdhc2sleep-grp { + fsl,pins = < + MX91_PAD_SD2_CLK__GPIO3_IO1 0x51e + MX91_PAD_SD2_CMD__GPIO3_IO2 0x51e + MX91_PAD_SD2_DATA0__GPIO3_IO3 0x51e + MX91_PAD_SD2_DATA1__GPIO3_IO4 0x51e + MX91_PAD_SD2_DATA2__GPIO3_IO5 0x51e + MX91_PAD_SD2_DATA3__GPIO3_IO6 0x51e + MX91_PAD_SD2_VSELECT__GPIO3_IO19 0x51e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX91_PAD_SD2_CD_B__GPIO3_IO0 0x31e + >; + }; + + pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleep-grp { + fsl,pins = < + MX91_PAD_SD2_CD_B__GPIO3_IO0 0x51e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx91-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx91-var-som.dtsi new file mode 100644 index 0000000..b30a0d8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx91-var-som.dtsi @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Common dtsi for Variscite VAR-SOM-MX91 + * + * Link: https://variscite.com/system-on-module-som/i-mx-9/i-mx-91/var-som-mx91/ + * + * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/ + * + */ + +/dts-v1/; + +#include "imx91.dtsi" + +/{ + model = "Variscite VAR-SOM-MX91 module"; + compatible = "variscite,var-som-mx91", "fsl,imx91"; + + usdhc3_pwrseq: mmc-pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <10000>; + reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */ + <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,name = "wm8904-audio"; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "IN1L", "Microphone Jack", + "IN1R", "Microphone Jack"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + simple-audio-card,mclk-fs = <256>; + + codec_dai: simple-audio-card,codec { + sound-dai = <&wm8904>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + }; +}; + +&eqos { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_eqos>; + pinctrl-1 = <&pinctrl_eqos_sleep>; + /* + * The required RGMII TX and RX 2ns delays are implemented directly + * in hardware via passive delay elements on the SOM PCB. + * No delay configuration is needed in software via PHY driver. + */ + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + snps,clk-csr = <5>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + eee-broken-1000t; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + reset-assert-us = <15000>; + reset-deassert-us = <100000>; + }; + }; +}; + +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + pinctrl-2 = <&pinctrl_lpi2c3_gpio>; + scl-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2237500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + wm8904: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&clk IMX93_CLK_SAI1_GATE>; + clock-names = "mclk"; + AVDD-supply = <&buck5>; + CPVDD-supply = <&buck5>; + DBVDD-supply = <&buck4>; + DCVDD-supply = <&buck5>; + MICVDD-supply = <&buck5>; + wlf,drc-cfg-names = "default", "peaklimiter", "tradition", + "soft", "music"; + /* + * Config registers per name, respectively: + * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1 + * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1 + * KNEE_IP = -42, KNEE_OP = -3, HI_COMP = 0, LO_COMP = 1 + * KNEE_IP = -45, KNEE_OP = -9, HI_COMP = 1/8, LO_COMP = 1 + * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1 + */ + wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>, + /bits/ 16 <0x04af 0x324b 0x0010 0x0408>, + /bits/ 16 <0x04af 0x324b 0x0028 0x0704>, + /bits/ 16 <0x04af 0x324b 0x0018 0x078c>, + /bits/ 16 <0x04af 0x324b 0x0010 0x050e>; + /* GPIO1 = DMIC_CLK, don't touch others */ + wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>; + }; +}; + +&lpspi8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi8>; + cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* BT module */ +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart5>, <&pinctrl_bluetooth>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +&sai1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_sai1>; + pinctrl-1 = <&pinctrl_sai1_sleep>; + assigned-clocks = <&clk IMX93_CLK_SAI1>; + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* WiFi */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>; + bus-width = <4>; + keep-power-in-suspend; + mmc-pwrseq = <&usdhc3_pwrseq>; + non-removable; + wakeup-source; + status = "okay"; +}; + +&iomuxc { + pinctrl_bluetooth: bluetoothgrp { + fsl,pins = < + MX91_PAD_ENET2_MDIO__GPIO4_IO15 0x51e + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX91_PAD_ENET1_MDC__ENET1_MDC 0x57e + MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e + MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e + MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e + MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x5fe + MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e + MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x57e + MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e + MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e + MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe + MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e + MX91_PAD_UART2_TXD__GPIO1_IO7 0x51e + >; + }; + + pinctrl_eqos_sleep: eqos-sleepgrp { + fsl,pins = < + MX91_PAD_ENET1_MDC__GPIO4_IO0 0x31e + MX91_PAD_ENET1_MDIO__GPIO4_IO1 0x31e + MX91_PAD_ENET1_RD0__GPIO4_IO10 0x31e + MX91_PAD_ENET1_RD1__GPIO4_IO11 0x31e + MX91_PAD_ENET1_RD2__GPIO4_IO12 0x31e + MX91_PAD_ENET1_RD3__GPIO4_IO13 0x31e + MX91_PAD_ENET1_RXC__GPIO4_IO9 0x31e + MX91_PAD_ENET1_RX_CTL__GPIO4_IO8 0x31e + MX91_PAD_ENET1_TD0__GPIO4_IO5 0x31e + MX91_PAD_ENET1_TD1__GPIO4_IO4 0x31e + MX91_PAD_ENET1_TD2__GPIO4_IO3 0x31e + MX91_PAD_ENET1_TD3__GPIO4_IO2 0x31e + MX91_PAD_ENET1_TXC__GPIO4_IO7 0x31e + MX91_PAD_ENET1_TX_CTL__GPIO4_IO6 0x31e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c3_gpio: lpi2c3-gpiogrp { + fsl,pins = < + MX91_PAD_GPIO_IO28__GPIO2_IO28 0x40000b9e + MX91_PAD_GPIO_IO29__GPIO2_IO29 0x40000b9e + >; + }; + + pinctrl_lpspi8: lpspi8grp { + fsl,pins = < + MX91_PAD_GPIO_IO12__GPIO2_IO12 0x31e + MX91_PAD_GPIO_IO13__LPSPI8_SIN 0x31e + MX91_PAD_GPIO_IO14__LPSPI8_SOUT 0x31e + MX91_PAD_GPIO_IO15__LPSPI8_SCK 0x31e + >; + }; + + pinctrl_lpuart5: lpuart5grp { + fsl,pins = < + MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX91_PAD_DAP_TDI__LPUART5_RX 0x31e + MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX91_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e + MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e + MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x31e + MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x31e + MX91_PAD_I2C2_SDA__SAI1_RX_BCLK 0x31e + MX91_PAD_I2C2_SCL__SAI1_RX_SYNC 0x31e + MX91_PAD_UART2_RXD__SAI1_MCLK 0x31e + >; + }; + + pinctrl_sai1_sleep: sai1-sleepgrp { + fsl,pins = < + MX91_PAD_SAI1_TXC__GPIO1_IO12 0x31e + MX91_PAD_SAI1_TXFS__GPIO1_IO11 0x31e + MX91_PAD_SAI1_TXD0__GPIO1_IO13 0x31e + MX91_PAD_SAI1_RXD0__GPIO1_IO14 0x31e + MX91_PAD_UART2_RXD__GPIO1_IO6 0x31e + MX91_PAD_I2C2_SDA__GPIO1_IO3 0x31e + MX91_PAD_I2C2_SCL__GPIO1_IO2 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x1582 + MX91_PAD_SD1_CMD__USDHC1_CMD 0x1382 + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x1382 + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x1382 + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x1382 + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x1382 + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x1382 + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x1382 + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x1382 + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x1382 + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x1582 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x158e + MX91_PAD_SD1_CMD__USDHC1_CMD 0x138e + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x15fe + MX91_PAD_SD1_CMD__USDHC1_CMD 0x13fe + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX91_PAD_SD3_CLK__USDHC3_CLK 0x1582 + MX91_PAD_SD3_CMD__USDHC3_CMD 0x1382 + MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x1382 + MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x1382 + MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x1382 + MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x1382 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX91_PAD_SD3_CLK__USDHC3_CLK 0x158e + MX91_PAD_SD3_CMD__USDHC3_CMD 0x138e + MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x138e + MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x138e + MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x138e + MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x138e + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX91_PAD_SD3_CLK__USDHC3_CLK 0x15fe + MX91_PAD_SD3_CMD__USDHC3_CMD 0x13fe + MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x13fe + MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x13fe + MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x13fe + MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x13fe + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX91_PAD_SD3_CLK__GPIO3_IO20 0x31e + MX91_PAD_SD3_CMD__GPIO3_IO21 0x31e + MX91_PAD_SD3_DATA0__GPIO3_IO22 0x31e + MX91_PAD_SD3_DATA1__GPIO3_IO23 0x31e + MX91_PAD_SD3_DATA2__GPIO3_IO24 0x31e + MX91_PAD_SD3_DATA3__GPIO3_IO25 0x31e + >; + }; + + pinctrl_usdhc3_wlan: usdhc3-wlangrp { + fsl,pins = < + MX91_PAD_ENET2_MDC__GPIO4_IO14 0x51e + MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x51e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi index 46a5d2d..a1a7e6a 100644 --- a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi +++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi @@ -525,6 +525,7 @@ clocks = <&clk IMX93_CLK_WDOG3_GATE>; timeout-sec = <40>; status = "disabled"; + bootph-all; }; wdog4: watchdog@424a0000 { @@ -534,6 +535,7 @@ clocks = <&clk IMX93_CLK_WDOG4_GATE>; timeout-sec = <40>; status = "disabled"; + bootph-all; }; wdog5: watchdog@424b0000 { @@ -543,6 +545,7 @@ clocks = <&clk IMX93_CLK_WDOG5_GATE>; timeout-sec = <40>; status = "disabled"; + bootph-all; }; tpm3: pwm@424e0000 { diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk-common.dtsi b/arch/arm64/boot/dts/freescale/imx93-11x11-evk-common.dtsi index 7d3fc4a..f48e794 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk-common.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk-common.dtsi @@ -187,7 +187,6 @@ compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; - clock-frequency = <5000000>; ethphy1: ethernet-phy@1 { reg = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi new file mode 100644 index 0000000..d167c9f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2026 NXP + */ + +/dts-v1/; +/plugin/; + +#include +#include "imx93-pinfunc.h" + +&{/} { + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&pcal6524 2 GPIO_ACTIVE_HIGH>; + }; + + panel { + compatible = "ontat,kd50g21-40nt-a1"; + backlight = <&backlight>; + power-supply = <®_rpi_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&dpi_to_panel>; + }; + }; + }; +}; + +&dpi_bridge { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dpi_to_panel: endpoint { + remote-endpoint = <&panel_in>; + bus-width = <18>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x31e + MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x31e + MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x31e + MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x31e + MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x31e + MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x31e + MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x31e + MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x31e + MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x31e + MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x31e + MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x31e + MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x31e + MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x31e + MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x31e + MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x31e + MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x31e + MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x31e + MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x31e + MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x31e + MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x31e + MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x31e + MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x31e + >; + }; +}; + +&lcdif { + status = "okay"; +}; + +&media_blk_ctrl { + status = "okay"; +}; + +&pcal6524 { + /* + * exp-sel-hog has property 'output-low' while DT overlay doesn't + * support /delete-property/. Both 'output-low' and 'output-high' + * will exist under hog nodes if DT overlay file sets 'output-high'. + * Workaround is to disable this hog and create new hog with + * 'output-high'. + */ + exp-sel-hog { + status = "disabled"; + }; + + exp-high-sel-hog { + gpio-hog; + gpios = <22 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + +&sai3 { + /* disable due to GPIO12 and GPIO17~20 pin conflicts with LCDIF */ + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso index d167c9f..356533a 100644 --- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso @@ -3,108 +3,4 @@ * Copyright 2026 NXP */ -/dts-v1/; -/plugin/; - -#include -#include "imx93-pinfunc.h" - -&{/} { - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&pcal6524 2 GPIO_ACTIVE_HIGH>; - }; - - panel { - compatible = "ontat,kd50g21-40nt-a1"; - backlight = <&backlight>; - power-supply = <®_rpi_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&dpi_to_panel>; - }; - }; - }; -}; - -&dpi_bridge { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dpi_to_panel: endpoint { - remote-endpoint = <&panel_in>; - bus-width = <18>; - }; - }; - }; -}; - -&iomuxc { - pinctrl_lcdif: lcdifgrp { - fsl,pins = < - MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x31e - MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x31e - MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x31e - MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x31e - MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x31e - MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x31e - MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x31e - MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x31e - MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x31e - MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x31e - MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x31e - MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x31e - MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x31e - MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x31e - MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x31e - MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x31e - MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x31e - MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x31e - MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x31e - MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x31e - MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x31e - MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x31e - >; - }; -}; - -&lcdif { - status = "okay"; -}; - -&media_blk_ctrl { - status = "okay"; -}; - -&pcal6524 { - /* - * exp-sel-hog has property 'output-low' while DT overlay doesn't - * support /delete-property/. Both 'output-low' and 'output-high' - * will exist under hog nodes if DT overlay file sets 'output-high'. - * Workaround is to disable this hog and create new hog with - * 'output-high'. - */ - exp-sel-hog { - status = "disabled"; - }; - - exp-high-sel-hog { - gpio-hog; - gpios = <22 GPIO_ACTIVE_HIGH>; - output-high; - }; -}; - -&sai3 { - /* disable due to GPIO12 and GPIO17~20 pin conflicts with LCDIF */ - status = "disabled"; -}; +#include "imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-tianma-tm050rdh03.dtso b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-tianma-tm050rdh03.dtso new file mode 100644 index 0000000..c233797 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-tianma-tm050rdh03.dtso @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2026 NXP + */ + +#include +#include "imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi" + +&{/} { + panel { + compatible = "tianma,tm050rdh03"; + enable-gpios = <&pcal6524 8 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts index 7bcebd7..01c11c5 100644 --- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts @@ -228,7 +228,6 @@ compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; - clock-frequency = <5000000>; ethphy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts index eac389e..f868ed5 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts @@ -141,6 +141,37 @@ status = "okay"; }; +&gpio1 { + gpio-line-names = "", "USER_LED", "I2C2_SCL", "I2C2_SDA"; +}; + +&gpio2 { + gpio-line-names = "SPI6_CS0", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "TPM_nIRQ", "", "", + "", "", "", "", "", + "", "", "", "I2C3_SDA", "I2C3_SCL"; +}; + +&gpio3 { + gpio-line-names = "SD2_nCD", "", "", "", "", + "", "", "SD2_nRESET", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "nENET1_INT"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "nCAN_EN", "", "", "", + "", "", "", "RESET_PHY", "", + "", "RTC_nINT", "PMIC_IRQ_B"; +}; + /* I2C2 */ &lpi2c2 { clock-frequency = <400000>; @@ -339,8 +370,8 @@ /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc2_default: usdhc2grp { fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e - MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000178e + MX93_PAD_SD2_CLK__USDHC2_CLK 0x119e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001386 MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001386 MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001386 @@ -352,7 +383,7 @@ /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e + MX93_PAD_SD2_CLK__USDHC2_CLK 0x119e MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e @@ -365,7 +396,7 @@ /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e + MX93_PAD_SD2_CLK__USDHC2_CLK 0x119e MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-av-18.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-av-18.dtso new file mode 100644 index 0000000..11f7d75 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-av-18.dtso @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2026 PHYTEC Messtechnik GmbH + * + * Author: Florijan Plohl + */ + +#include "imx93-pinfunc.h" +#include "imx91-93-phyboard-segin-peb-av-18.dtsi" + +&iomuxc { + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x57e + MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x51e + MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x51e + MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x51e + MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x51e + MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x51e + MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x51e + MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x51e + MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x51e + MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x51e + MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x51e + MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x51e + MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x51e + MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x51e + MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x51e + MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x51e + MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x51e + MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x51e + MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x51e + MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x51e + MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x51e + MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x51e + >; + }; + + pinctrl_panel: panelgrp { + fsl,pins = < + MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x1133e + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x1133e + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x11e + MX93_PAD_ENET1_RD2__GPIO4_IO12 0x1133e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts index a982606..d929aa9 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts @@ -145,6 +145,24 @@ status = "okay"; }; +&gpio1 { + gpio-line-names = "", "USER_LED", "I2C1_SCL", "I2C1_SDA"; +}; + +&gpio3 { + gpio-line-names = "SD1_nCD", "", "", "", "", + "", "", "SD1_nRESET"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "CAN_EN", "", "", "", + "", "", "", "RESET_PHY", "", + "", "RTC_nINT", "PMIC_IRQ_B"; +}; + /* I2C2 */ &lpi2c2 { clock-frequency = <400000>; @@ -310,7 +328,7 @@ /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc2_default: usdhc2grp { fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e + MX93_PAD_SD2_CLK__USDHC2_CLK 0x119e MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e @@ -323,7 +341,7 @@ /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e + MX93_PAD_SD2_CLK__USDHC2_CLK 0x119e MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e @@ -336,7 +354,7 @@ /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX93_PAD_SD2_CLK__USDHC2_CLK 0x118e MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi index ebc5784..325e465 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi @@ -9,6 +9,7 @@ */ #include +#include #include "imx93.dtsi" @@ -90,6 +91,28 @@ }; }; +&gpio1 { + gpio-line-names = "", "USER_LED"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "I2C3_SDA", "I2C3_SCL"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "RESET_PHY", "", + "", "", "PMIC_IRQ_B"; +}; + /* I2C3 */ &lpi2c3 { clock-frequency = <400000>; @@ -140,6 +163,7 @@ regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; + regulator-initial-mode = ; }; buck6: BUCK6 { @@ -194,6 +218,7 @@ bus-width = <8>; non-removable; no-1-8-v; + fsl,strobe-dll-delay-target = <1>; status = "okay"; }; @@ -220,7 +245,7 @@ MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x50e MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x50e MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x4000050e - MX93_PAD_ENET2_RXC__GPIO4_IO23 0x51e + MX93_PAD_ENET2_RXC__GPIO4_IO23 0x502 >; }; @@ -253,7 +278,7 @@ /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x179e + MX93_PAD_SD1_CLK__USDHC1_CLK 0x119e MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001386 MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001386 @@ -263,14 +288,14 @@ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001386 MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001386 MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001386 - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x159e >; }; /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX93_PAD_SD1_CLK__USDHC1_CLK 0x11be MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000139e MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000139e @@ -280,14 +305,14 @@ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000139e MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000139e MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000139e - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x159e >; }; /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX93_PAD_SD1_CLK__USDHC1_CLK 0x11be MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000139e MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000139e MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013be @@ -297,7 +322,7 @@ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013be MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013be MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013be - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x159e >; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts new file mode 100644 index 0000000..5513d3b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts @@ -0,0 +1,654 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Variscite Sonata carrier board for DART-MX93 + * + * Link: https://variscite.com/carrier-boards/sonata-board/ + * + * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/ + * + */ + +/dts-v1/; + +#include +#include "imx93-var-dart.dtsi" + +/ { + model = "Variscite DART-MX93 on Sonata-Board"; + compatible = "variscite,var-dart-mx93-sonata", + "variscite,var-dart-mx93", + "fsl,imx93"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c4 = &lpi2c5; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &lpuart1; + serial1 = &lpuart2; + serial2 = &lpuart3; + serial3 = &lpuart4; + serial4 = &lpuart5; + serial5 = &lpuart6; + serial6 = &lpuart7; + }; + + chosen { + stdout-path = &lpuart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-home { + label = "Home"; + linux,code = ; + gpios = <&pca6408_1 4 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-up { + label = "Up"; + linux,code = ; + gpios = <&pca6408_1 5 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-down { + label = "Down"; + linux,code = ; + gpios = <&pca6408_1 6 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-back { + label = "Back"; + linux,code = ; + gpios = <&pca6408_1 7 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_gpio>; + + led-emmc { + gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + label = "eMMC"; + linux,default-trigger = "mmc0"; + }; + }; + + clk40m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + clock-output-names = "can_osc"; + }; + + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + }; + + reg_usdhc2_vmmc: regulator-vmmc-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VDD_SD2_3V3"; + off-on-delay-us = <20000>; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ethosu_mem: ethosu-region@88000000 { + compatible = "shared-dma-pool"; + reusable; + reg = <0x0 0x88000000 0x0 0x8000000>; + }; + + vdev0vring0: vdev0vring0@87ee0000 { + reg = <0 0x87ee0000 0 0x8000>; + no-map; + }; + + vdev0vring1: vdev0vring1@87ee8000 { + reg = <0 0x87ee8000 0 0x8000>; + no-map; + }; + + vdev1vring0: vdev1vring0@87ef0000 { + reg = <0 0x87ef0000 0 0x8000>; + no-map; + }; + + vdev1vring1: vdev1vring1@87ef8000 { + reg = <0 0x87ef8000 0 0x8000>; + no-map; + }; + + rsc_table: rsc-table@2021e000 { + reg = <0 0x2021e000 0 0x1000>; + no-map; + }; + + vdevbuffer: vdevbuffer@87f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x87f00000 0 0x100000>; + no-map; + }; + + ele_reserved: ele-reserved@87de0000 { + compatible = "shared-dma-pool"; + reg = <0 0x87de0000 0 0x100000>; + no-map; + }; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +/* Use external instead of internal RTC */ +&bbnsm_rtc { + status = "disabled"; +}; + +&eqos { + mdio { + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-assert-us = <15000>; + reset-deassert-us = <100000>; + reset-gpios = <&pca6408_2 0 GPIO_ACTIVE_LOW>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + }; + }; + }; +}; + +ðphy0 { + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + }; +}; + +&fec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; + /* + * The required RGMII TX and RX 2ns delays are implemented directly + * in hardware via passive delay elements on the SOM PCB. + * No delay configuration is needed in software via PHY driver. + */ + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + status = "okay"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&lpi2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-1 = <&pinctrl_lpi2c1_gpio>; + pinctrl-2 = <&pinctrl_lpi2c1_gpio>; + pinctrl-names = "default", "sleep", "gpio"; + scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pca9534: gpio@22 { + compatible = "nxp,pca9534"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + }; + + /* Capacitive touch controller */ + ft5x06_ts: touchscreen@38 { + compatible = "edt,edt-ft5206"; + reg = <0x38>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&pinctrl_captouch>; + pinctrl-names = "default"; + reset-gpios = <&pca6408_2 4 GPIO_ACTIVE_LOW>; + touchscreen-inverted-x; + touchscreen-inverted-y; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + wakeup-source; + }; + + /* USB Type-C Controller */ + typec@3d { + compatible = "nxp,ptn5150"; + reg = <0x3d>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&pinctrl_extcon>; + pinctrl-names = "default"; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + wakeup-source; + }; +}; + +&lpi2c5 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5_gpio>; + pinctrl-2 = <&pinctrl_lpi2c5_gpio>; + scl-gpios = <&gpio2 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&lpi2c7 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c7>; + pinctrl-1 = <&pinctrl_lpi2c7_gpio>; + pinctrl-2 = <&pinctrl_lpi2c7_gpio>; + scl-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pca6408_1: gpio@20 { + compatible = "nxp,pcal6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + }; + + pca6408_2: gpio@21 { + compatible = "nxp,pcal6408"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + }; + + st33ktpm2xi2c: tpm@2e { + compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + }; +}; + +&lpspi8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi8>; + cs-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* CAN controller */ + can0: can@0 { + compatible = "microchip,mcp251xfd"; + reg = <0>; + clocks = <&clk40m>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + spi-max-frequency = <1000000>; + }; +}; + +/* Console (J10) */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* Header (J12.4, J12.6) */ +&lpuart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +/* Header (J12.11, J12.13) */ +&lpuart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +&tpm3 { + pinctrl-0 = <&pinctrl_tpm3>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +/* SD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&wdog3 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_can: cangrp { + fsl,pins = < + MX93_PAD_GPIO_IO03__GPIO2_IO03 0x31e + >; + }; + + pinctrl_captouch: captouchgrp { + fsl,pins = < + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e + >; + }; + + pinctrl_extcon: extcongrp { + fsl,pins = < + MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x37e + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_fec_sleep: fecsleepgrp { + fsl,pins = < + MX93_PAD_ENET2_RD0__GPIO4_IO24 0x51e + MX93_PAD_ENET2_RD1__GPIO4_IO25 0x51e + MX93_PAD_ENET2_RD2__GPIO4_IO26 0x51e + MX93_PAD_ENET2_RD3__GPIO4_IO27 0x51e + MX93_PAD_ENET2_RXC__GPIO4_IO23 0x51e + MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e + MX93_PAD_ENET2_TD0__GPIO4_IO19 0x51e + MX93_PAD_ENET2_TD1__GPIO4_IO18 0x51e + MX93_PAD_ENET2_TD2__GPIO4_IO17 0x51e + MX93_PAD_ENET2_TD3__GPIO4_IO16 0x51e + MX93_PAD_ENET2_TXC__GPIO4_IO21 0x51e + MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX93_PAD_PDM_CLK__CAN1_TX 0x139e + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* GPIO Expanders shared IRQ */ + MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e + >; + }; + + pinctrl_leds_gpio: ledgrp { + fsl,pins = < + MX93_PAD_GPIO_IO11__GPIO2_IO11 0x31e + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c1_gpio: lpi2c1-gpiogrp { + fsl,pins = < + MX93_PAD_I2C1_SCL__GPIO1_IO00 0x31e + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e + MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c5_gpio: lpi2c5-gpiogrp { + fsl,pins = < + MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e + MX93_PAD_GPIO_IO23__GPIO2_IO23 0x31e + >; + }; + + pinctrl_lpi2c7: lpi2c7grp { + fsl,pins = < + MX93_PAD_GPIO_IO07__LPI2C7_SCL 0x40000b9e + MX93_PAD_GPIO_IO06__LPI2C7_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c7_gpio: lpi2c7-gpiogrp { + fsl,pins = < + MX93_PAD_GPIO_IO07__GPIO2_IO07 0x31e + MX93_PAD_GPIO_IO06__GPIO2_IO06 0x31e + >; + }; + + pinctrl_lpspi8: lpspi8grp { + fsl,pins = < + MX93_PAD_GPIO_IO00__GPIO2_IO00 0x31e + MX93_PAD_GPIO_IO01__GPIO2_IO01 0x31e + MX93_PAD_GPIO_IO12__GPIO2_IO12 0x31e + MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x31e + MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x31e + MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x31e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x31e + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX93_PAD_GPIO_IO02__GPIO2_IO02 0x31e + >; + }; + + pinctrl_tpm3: tpm3grp { + fsl,pins = < + MX93_PAD_GPIO_IO24__TPM3_CH3 0x51e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e + MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX93_PAD_GPIO_IO09__LPUART7_RX 0x31e + MX93_PAD_GPIO_IO08__LPUART7_TX 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582 + MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382 + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382 + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382 + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382 + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382 + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi new file mode 100644 index 0000000..69495bb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Common dtsi for Variscite DART-MX93 + * + * Link: https://variscite.com/system-on-module-som/i-mx-9/i-mx-93/dart-mx93/ + * + * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/ + * + */ + +/dts-v1/; + +#include +#include "imx93.dtsi" + +/ { + model = "Variscite DART-MX93 Module"; + compatible = "variscite,var-dart-mx93", "fsl,imx93"; + + sound-wm8904 { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "wm8904-audio"; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "IN1L", "Microphone Jack", + "IN1R", "Microphone Jack"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + + codec_dai: simple-audio-card,codec { + sound-dai = <&wm8904>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <10000>; + reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */ + <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */ + }; +}; + +&cm33 { + mbox-names = "tx", "rx", "rxdb"; + mboxes = <&mu1 0 1>, + <&mu1 1 1>, + <&mu1 3 1>; + memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, + <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>; + status = "okay"; +}; + +&eqos { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_eqos>; + pinctrl-1 = <&pinctrl_eqos_sleep>; + /* + * The required RGMII TX and RX 2ns delays are implemented directly + * in hardware via passive delay elements on the SOM PCB. + * No delay configuration is needed in software via PHY driver. + */ + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + snps,clk-csr = <5>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <100000>; + }; + }; +}; + +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + pinctrl-2 = <&pinctrl_lpi2c3_gpio>; + scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + wm8904: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&clk IMX93_CLK_SAI1_GATE>; + clock-names = "mclk"; + AVDD-supply = <&buck5>; + CPVDD-supply = <&buck5>; + DBVDD-supply = <&buck4>; + DCVDD-supply = <&buck5>; + MICVDD-supply = <&buck5>; + wlf,drc-cfg-names = "default", "peaklimiter", "tradition", + "soft", "music"; + /* + * Config registers per name, respectively: + * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1 + * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1 + * KNEE_IP = -42, KNEE_OP = -3, HI_COMP = 0, LO_COMP = 1 + * KNEE_IP = -45, KNEE_OP = -9, HI_COMP = 1/8, LO_COMP = 1 + * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1 + */ + wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>, + /bits/ 16 <0x04af 0x324b 0x0010 0x0408>, + /bits/ 16 <0x04af 0x324b 0x0028 0x0704>, + /bits/ 16 <0x04af 0x324b 0x0018 0x078c>, + /bits/ 16 <0x04af 0x324b 0x0010 0x050e>; + /* GPIO1 = DMIC_CLK, don't touch others */ + wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>; + /* DMIC is connected to IN1L */ + wlf,in1l-as-dmicdat1; + }; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2237500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +/* BT module */ +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>, <&pinctrl_bt>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +&mu1 { + status = "okay"; +}; + +&mu2 { + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_sai1>; + pinctrl-1 = <&pinctrl_sai1_sleep>; + assigned-clocks = <&clk IMX93_CLK_SAI1>; + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* WiFi */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>; + mmc-pwrseq = <&wifi_pwrseq>; + keep-power-in-suspend; + bus-width = <4>; + non-removable; + wakeup-source; + status = "okay"; +}; + +&iomuxc { + pinctrl_bt: btgrp { + fsl,pins = < + MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e + MX93_PAD_UART2_TXD__GPIO1_IO07 0x51e + >; + }; + + pinctrl_eqos_sleep: eqos-sleepgrp { + fsl,pins = < + MX93_PAD_ENET1_MDC__GPIO4_IO00 0x31e + MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x31e + MX93_PAD_ENET1_RD0__GPIO4_IO10 0x31e + MX93_PAD_ENET1_RD1__GPIO4_IO11 0x31e + MX93_PAD_ENET1_RD2__GPIO4_IO12 0x31e + MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e + MX93_PAD_ENET1_RXC__GPIO4_IO09 0x31e + MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x31e + MX93_PAD_ENET1_TD0__GPIO4_IO05 0x31e + MX93_PAD_ENET1_TD1__GPIO4_IO04 0x31e + MX93_PAD_ENET1_TD2__GPIO4_IO03 0x31e + MX93_PAD_ENET1_TD3__GPIO4_IO02 0x31e + MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e + MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x31e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c3_gpio: lpi2c3gpiogrp { + fsl,pins = < + MX93_PAD_GPIO_IO28__GPIO2_IO28 0x40000b9e + MX93_PAD_GPIO_IO29__GPIO2_IO29 0x40000b9e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e + MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e + MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x31e + MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x31e + MX93_PAD_I2C2_SDA__SAI1_RX_BCLK 0x31e + MX93_PAD_I2C2_SCL__SAI1_RX_SYNC 0x31e + MX93_PAD_UART2_RXD__SAI1_MCLK 0x31e + >; + }; + + pinctrl_sai1_sleep: sai1-sleepgrp { + fsl,pins = < + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x31e + MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x31e + MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x31e + MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x31e + MX93_PAD_UART2_RXD__GPIO1_IO06 0x31e + MX93_PAD_I2C2_SDA__GPIO1_IO03 0x31e + MX93_PAD_I2C2_SCL__GPIO1_IO02 0x31e + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582 + MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382 + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382 + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382 + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382 + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382 + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382 + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382 + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382 + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382 + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e + MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__GPIO3_IO20 0x400 + MX93_PAD_SD3_CMD__GPIO3_IO21 0x400 + MX93_PAD_SD3_DATA0__GPIO3_IO22 0x400 + MX93_PAD_SD3_DATA1__GPIO3_IO23 0x400 + MX93_PAD_SD3_DATA2__GPIO3_IO24 0x400 + MX93_PAD_SD3_DATA3__GPIO3_IO25 0x400 + >; + }; + + pinctrl_usdhc3_wlan: usdhc3wlangrp { + fsl,pins = < + MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x51e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts index c0842fb..409c7e7 100644 --- a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts +++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts @@ -35,6 +35,7 @@ serial3 = &lpuart4; serial4 = &lpuart5; serial5 = &lpuart6; + serial6 = &lpuart7; }; @@ -158,6 +159,11 @@ }; }; +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + /* Use external instead of internal RTC*/ &bbnsm_rtc { status = "disabled"; @@ -208,6 +214,29 @@ sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; status = "okay"; + pcal6408: gpio@21 { + compatible = "nxp,pcal6408"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + status = "okay"; + + /* RGB_SEL */ + lvds-brg-enable-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds_brg_en"; + }; + }; + + st33ktpm2xi2c: tpm@2e { + compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + label = "tpm"; + reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>; + }; + /* Capacitive touch controller */ ft5x06_ts: touchscreen@38 { compatible = "edt,edt-ft5206"; @@ -290,6 +319,19 @@ status = "okay"; }; +&lpuart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +&tpm3 { + pinctrl-0 = <&pinctrl_tpm3>; + pinctrl-1 = <&pinctrl_tpm3_sleep>; + pinctrl-names = "default", "sleep"; + status = "okay"; +}; + &usbotg1 { dr_mode = "otg"; hnp-disable; @@ -412,6 +454,18 @@ >; }; + pinctrl_tpm3: tpm3grp { + fsl,pins = < + MX93_PAD_GPIO_IO24__TPM3_CH3 0x51e + >; + }; + + pinctrl_tpm3_sleep: tpm3sleepgrp { + fsl,pins = < + MX93_PAD_GPIO_IO24__GPIO2_IO24 0x51e + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX93_PAD_UART1_RXD__LPUART1_RX 0x31e @@ -426,6 +480,13 @@ >; }; + pinctrl_uart7: uart7grp { + fsl,pins = < + MX93_PAD_GPIO_IO09__LPUART7_RX 0x31e + MX93_PAD_GPIO_IO08__LPUART7_TX 0x31e + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < MX93_PAD_GPIO_IO18__GPIO2_IO18 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi index c460ece..a6cb5a6 100644 --- a/arch/arm64/boot/dts/freescale/imx94.dtsi +++ b/arch/arm64/boot/dts/freescale/imx94.dtsi @@ -67,6 +67,13 @@ clock-output-names = "sai4_mclk"; }; + clk_sys100m: clock-sys100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "clk_sys100m"; + }; + firmware { scmi { compatible = "arm,scmi"; @@ -1283,9 +1290,29 @@ timeout-sec = <40>; fsl,ext-reset-output; status = "disabled"; + bootph-all; + }; + + wdog4: watchdog@49230000 { + compatible = "fsl,imx94-wdt", "fsl,imx93-wdt"; + reg = <0x49230000 0x10000>; + interrupts = ; + clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>; + timeout-sec = <40>; + fsl,ext-reset-output; + status = "disabled"; + bootph-all; }; }; + hsio_blk_ctl: syscon@4c0100c0 { + compatible = "nxp,imx95-hsio-blk-ctl", "syscon"; + reg = <0x0 0x4c0100c0 0x0 0x1>; + #clock-cells = <1>; + clocks = <&clk_sys100m>; + power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>; + }; + usb3: usb@4c100000 { compatible = "nxp,imx94-dwc3", "nxp,imx8mp-dwc3"; reg = <0x0 0x4c100000 0x0 0x10000>, @@ -1340,6 +1367,79 @@ #index-cells = <1>; }; + pcie0: pcie@4c300000 { + compatible = "fsl,imx94-pcie", "fsl,imx95-pcie"; + reg = <0 0x4c300000 0 0x10000>, + <0 0x60100000 0 0xfe00000>, + <0 0x4c360000 0 0x10000>, + <0 0x4c340000 0 0x4000>; + reg-names = "dbi", "config", "atu", "app"; + ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>, + <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x80000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + linux,pci-domain = <2>; + msi-map = <0x0 &its 0x10 0x1>, + <0x100 &its 0x11 0x7>; + msi-map-mask = <0x1ff>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + num-viewport = <8>; + interrupts = , + ; + interrupt-names = "msi", "dma"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 0 GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 0 GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 0 GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX94_CLK_HSIO>, + <&scmi_clk IMX94_CLK_HSIOPLL>, + <&scmi_clk IMX94_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX94_CLK_HSIOPCIEAUX>, + <&hsio_blk_ctl 0>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref"; + assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX94_CLK_HSIOPLL>, + <&scmi_clk IMX94_CLK_HSIOPCIEAUX>; + assigned-clock-rates = <3600000000>, <100000000>, <10000000>; + assigned-clock-parents = <0>, <0>, + <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>; + power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>; + fsl,max-link-speed = <3>; + status = "disabled"; + }; + + pcie0_ep: pcie-ep@4c300000 { + compatible = "fsl,imx94-pcie-ep", "fsl,imx95-pcie-ep"; + reg = <0 0x4c300000 0 0x10000>, + <0 0x4c360000 0 0x1000>, + <0 0x4c320000 0 0x1000>, + <0 0x4c340000 0 0x4000>, + <0 0x4c370000 0 0x10000>, + <0x9 0 1 0>; + reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space"; + num-lanes = <1>; + interrupts = ; + interrupt-names = "dma"; + clocks = <&scmi_clk IMX94_CLK_HSIO>, + <&scmi_clk IMX94_CLK_HSIOPLL>, + <&scmi_clk IMX94_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX94_CLK_HSIOPCIEAUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; + assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX94_CLK_HSIOPLL>, + <&scmi_clk IMX94_CLK_HSIOPCIEAUX>; + assigned-clock-rates = <3600000000>, <100000000>, <10000000>; + assigned-clock-parents = <0>, <0>, + <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>; + msi-map = <0x0 &its 0x10 0x1>; + power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>; + status = "disabled"; + }; + netc_blk_ctrl: system-controller@4ceb0000 { compatible = "nxp,imx94-netc-blk-ctrl"; reg = <0x0 0x4ceb0000 0x0 0x10000>, @@ -1481,7 +1581,7 @@ ddr-pmu@4e090dc0 { compatible = "fsl,imx94-ddr-pmu", "fsl,imx93-ddr-pmu"; reg = <0x0 0x4e090dc0 0x0 0x200>; - interrupts = ; + interrupts = ; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx943-evk-sdwifi.dtso b/arch/arm64/boot/dts/freescale/imx943-evk-sdwifi.dtso new file mode 100644 index 0000000..59cc1c2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx943-evk-sdwifi.dtso @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2026 NXP + */ + +/dts-v1/; +/plugin/; + +&pcie0 { + status = "disabled"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts index 52f7ef7..7cfd424 100644 --- a/arch/arm64/boot/dts/freescale/imx943-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts @@ -58,6 +58,20 @@ stdout-path = &lpuart1; }; + pcie_ref_clk: clock-pcie-ref { + compatible = "gpio-gate-clock"; + clocks = <&xtal25m>; + #clock-cells = <0>; + enable-gpios = <&pca9670_i2c3 7 GPIO_ACTIVE_LOW>; + }; + + xtal25m: clock-xtal25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "xtal_25MHz"; + }; + dmic: dmic { compatible = "dmic-codec"; #sound-dai-cells = <0>; @@ -79,6 +93,15 @@ startup-delay-us = <5000>; }; + reg_slot_pwr: regulator-slot-pwr { + compatible = "regulator-fixed"; + regulator-name = "PCIe slot-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6416_i2c3_u46 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_m2_wlan: regulator-wlan { compatible = "regulator-fixed"; regulator-name = "WLAN_EN"; @@ -725,6 +748,18 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B 0x4000031e + >; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = < + IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B 0x4000031e + >; + }; + pinctrl_pdm: pdmgrp { fsl,pins = < IMX94_PAD_PDM_CLK__PDM_CLK 0x31e @@ -988,6 +1023,54 @@ }; }; +&pcie0 { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + clocks = <&scmi_clk IMX94_CLK_HSIO>, + <&scmi_clk IMX94_CLK_HSIOPLL>, + <&scmi_clk IMX94_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX94_CLK_HSIOPCIEAUX>, + <&hsio_blk_ctl 0>, + <&pcie_ref_clk>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", + "ref", "extref"; + reset-gpio = <&pcal6416_i2c3_u46 3 GPIO_ACTIVE_LOW>; + vpcie3v3aux-supply = <®_m2_wlan>; + supports-clkreq; + status = "okay"; +}; + +&pcie0_ep { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + vpcie-supply = <®_m2_pwr>; + status = "disabled"; +}; + +&pcie1 { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + clocks = <&scmi_clk IMX94_CLK_HSIO>, + <&scmi_clk IMX94_CLK_HSIOPLL>, + <&scmi_clk IMX94_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX94_CLK_HSIOPCIEAUX>, + <&hsio_blk_ctl 0>, + <&pcie_ref_clk>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", + "ref", "extref"; + reset-gpio = <&pcal6416_i2c3_u46 1 GPIO_ACTIVE_LOW>; + vpcie3v3aux-supply = <®_slot_pwr>; + supports-clkreq; + status = "okay"; +}; + +&pcie1_ep { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + vpcie-supply = <®_slot_pwr>; + status = "disabled"; +}; + &usb2 { dr_mode = "otg"; disable-over-current; @@ -1070,7 +1153,7 @@ keep-power-in-suspend; non-removable; wakeup-source; - status = "okay"; + status = "disabled"; }; &wdog3 { diff --git a/arch/arm64/boot/dts/freescale/imx943.dtsi b/arch/arm64/boot/dts/freescale/imx943.dtsi index dfd956e..ed030d4 100644 --- a/arch/arm64/boot/dts/freescale/imx943.dtsi +++ b/arch/arm64/boot/dts/freescale/imx943.dtsi @@ -209,4 +209,79 @@ }; }; }; + + soc { + pcie1: pcie@4c380000 { + compatible = "fsl,imx943-pcie", "fsl,imx95-pcie"; + reg = <0 0x4c380000 0 0x10000>, + <8 0x80100000 0 0xfe00000>, + <0 0x4c3e0000 0 0x10000>, + <0 0x4c3c0000 0 0x4000>; + reg-names = "dbi", "config", "atu", "app"; + ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>, + <0x82000000 0 0x10000000 0xa 0x10000000 0 0x80000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + linux,pci-domain = <3>; + msi-map = <0x0 &its 0x98 0x1>, + <0x100 &its 0x99 0x7>; + msi-map-mask = <0x1ff>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + num-viewport = <8>; + interrupts = , + ; + interrupt-names = "msi", "dma"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 0 GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 0 GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 0 GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX94_CLK_HSIO>, + <&scmi_clk IMX94_CLK_HSIOPLL>, + <&scmi_clk IMX94_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX94_CLK_HSIOPCIEAUX>, + <&hsio_blk_ctl 0>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref"; + assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX94_CLK_HSIOPLL>, + <&scmi_clk IMX94_CLK_HSIOPCIEAUX>; + assigned-clock-rates = <3600000000>, <100000000>, <10000000>; + assigned-clock-parents = <0>, <0>, + <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>; + power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>; + fsl,max-link-speed = <3>; + status = "disabled"; + }; + + pcie1_ep: pcie-ep@4c380000 { + compatible = "fsl,imx943-pcie-ep", "fsl,imx95-pcie-ep"; + reg = <0 0x4c380000 0 0x10000>, + <0 0x4c3e0000 0 0x1000>, + <0 0x4c3a0000 0 0x1000>, + <0 0x4c3c0000 0 0x4000>, + <0 0x4c3f0000 0 0x10000>, + <0xa 0 1 0>; + reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space"; + num-lanes = <1>; + interrupts = ; + interrupt-names = "dma"; + clocks = <&scmi_clk IMX94_CLK_HSIO>, + <&scmi_clk IMX94_CLK_HSIOPLL>, + <&scmi_clk IMX94_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX94_CLK_HSIOPCIEAUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; + assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX94_CLK_HSIOPLL>, + <&scmi_clk IMX94_CLK_HSIOPCIEAUX>; + assigned-clock-rates = <3600000000>, <100000000>, <10000000>; + assigned-clock-parents = <0>, <0>, + <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>; + msi-map = <0x0 &its 0x98 0x1>; + power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-ab2.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-ab2.dts new file mode 100644 index 0000000..f682914 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-15x15-ab2.dts @@ -0,0 +1,669 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2024 NXP + */ + +/dts-v1/; + +#include +#include "imx95.dtsi" + +#define BRD_SM_CTRL_SD3_WAKE 0x8000 +#define BRD_SM_CTRL_PCIE1_WAKE 0x8001 +#define BRD_SM_CTRL_BT_WAKE 0x8002 +#define BRD_SM_CTRL_PCIE2_WAKE 0x8003 +#define BRD_SM_CTRL_BUTTON 0x8004 + +/ { + compatible = "fsl,imx95-15x15-ab2", "fsl,imx95"; + model = "NXP i.MX95 CPU on AB2"; + + aliases { + ethernet0 = &enetc_port0; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &lpuart1; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + stdout-path = &lpuart1; + }; + + reg_ab2_ana_pwr: regulator-ab2-ana-pwr { + compatible = "regulator-fixed"; + regulator-name = "ab2_ana_pwr"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&pcal6524 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_ab2_vdd_pwr_5v0: regulator-ab2-vdd-pwr-5v0 { + compatible = "regulator-fixed"; + regulator-name = "ab2_vdd_pwr_5v0"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&pcal6524 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VDD_SD2_3V3"; + off-on-delay-us = <12000>; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + linux_cma: linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x80000000 0 0x7f000000>; + reusable; + size = <0 0x3c000000>; + linux,cma-default; + }; + + vpu_boot: vpu-boot@a0000000 { + reg = <0 0xa0000000 0 0x100000>; + no-map; + }; + }; + + sound-ak4458 { + compatible = "fsl,imx-audio-card"; + model = "ak4458-audio"; + + pri-dai-link { + format = "i2s"; + link-name = "akcodec"; + fsl,mclk-equal-bclk; + + codec { + sound-dai = <&ak4458_1>, <&ak4458_2>; + }; + + cpu { + sound-dai = <&sai2>; + }; + }; + }; + + sound-ak5552 { + compatible = "fsl,imx-audio-card"; + model = "ak5552-audio"; + + pri-dai-link { + format = "i2s"; + link-name = "akcodec"; + fsl,mclk-equal-bclk; + + codec { + sound-dai = <&ak5552>; + }; + + cpu { + sound-dai = <&sai3>; + }; + }; + }; + + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + format = "i2s"; + link-name = "micfil hifi"; + + cpu { + sound-dai = <&micfil>; + }; + }; + }; + + sound-xcvr { + compatible = "fsl,imx-audio-card"; + model = "imx-audio-xcvr"; + + pri-dai-link { + link-name = "XCVR PCM"; + + cpu { + sound-dai = <&xcvr>; + }; + }; + }; + + memory@80000000 { + reg = <0x0 0x80000000 0 0x80000000>; + device_type = "memory"; + }; +}; + +&enetc_port0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + pinctrl-0 = <&pinctrl_enetc0>; + pinctrl-names = "default"; + status = "okay"; +}; + +&lpi2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-names = "default"; + status = "disabled"; +}; + +&lpi2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-names = "default"; + status = "okay"; + + pcal6524: gpio@22 { + compatible = "nxp,pcal6524"; + reg = <0x22>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio5>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + pinctrl-0 = <&pinctrl_pcal6524>; + pinctrl-names = "default"; + }; +}; + +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-names = "default"; + status = "okay"; + + ak4458_1: audio-codec@10 { + compatible = "asahi-kasei,ak4458"; + reg = <0x10>; + #sound-dai-cells = <0>; + AVDD-supply = <®_ab2_ana_pwr>; + DVDD-supply = <®_ab2_ana_pwr>; + reset-gpios = <&pca6416 4 GPIO_ACTIVE_LOW>; + sound-name-prefix = "0"; + }; + + ak4458_3: audio-codec@11 { + compatible = "asahi-kasei,ak4458"; + reg = <0x11>; + #sound-dai-cells = <0>; + AVDD-supply = <®_ab2_ana_pwr>; + DVDD-supply = <®_ab2_ana_pwr>; + reset-gpios = <&pca6416 4 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + + ak4458_2: audio-codec@12 { + compatible = "asahi-kasei,ak4458"; + reg = <0x12>; + #sound-dai-cells = <0>; + AVDD-supply = <®_ab2_ana_pwr>; + DVDD-supply = <®_ab2_ana_pwr>; + reset-gpios = <&pca6416 4 GPIO_ACTIVE_LOW>; + sound-name-prefix = "1"; + }; + + ak5552: audio-codec@13 { + compatible = "asahi-kasei,ak5552"; + reg = <0x13>; + #sound-dai-cells = <0>; + AVDD-supply = <®_ab2_ana_pwr>; + DVDD-supply = <®_ab2_ana_pwr>; + reset-gpios = <&pca6416 3 GPIO_ACTIVE_LOW>; + }; + + pca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&lpi2c4 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&lpuart1 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&micfil { + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_PDM>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <49152000>; + #sound-dai-cells = <0>; + pinctrl-0 = <&pinctrl_pdm>; + pinctrl-names = "default"; + status = "okay"; +}; + +&netc_blk_ctrl { + status = "okay"; +}; + +&netc_emdio { + pinctrl-0 = <&pinctrl_emdio>; + pinctrl-names = "default"; + status = "okay"; + + ethphy0: ethernet-phy@1 { + reg = <1>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&pcal6524 4 GPIO_ACTIVE_LOW>; + realtek,clkout-disable; + }; +}; + +&netcmix_blk_ctrl { + status = "okay"; +}; + +&sai2 { + clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>, <&dummy>, + <&scmi_clk IMX95_CLK_SAI2>, <&dummy>, + <&dummy>, <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI2>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + #sound-dai-cells = <0>; + pinctrl-0 = <&pinctrl_sai2>; + pinctrl-names = "default"; + fsl,sai-asynchronous; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&sai3 { + clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>, <&dummy>, + <&scmi_clk IMX95_CLK_SAI3>, <&dummy>, + <&dummy>, <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + #sound-dai-cells = <0>; + pinctrl-0 = <&pinctrl_sai3>; + pinctrl-names = "default"; + fsl,sai-asynchronous; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&sai5 { + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI5>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + #sound-dai-cells = <0>; + pinctrl-0 = <&pinctrl_sai5>; + pinctrl-names = "default"; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&scmi_iomuxc { + pinctrl_emdio: emdiogrp { + fsl,pins = < + IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC 0x50e + IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO 0x90e + >; + }; + + pinctrl_enetc0: enetc0grp { + fsl,pins = < + IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x50e + IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x50e + IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x50e + IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x50e + IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e + IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e + IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e + IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e + IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e + IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e + IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e + IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL 0x40000b9e + IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x40000b9e + IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = < + IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e + IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e + >; + }; + + pinctrl_pcal6524: pcal6524grp { + fsl,pins = < + IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x31e + >; + }; + + pinctrl_pdm: pdmgrp { + fsl,pins = < + IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK 0x31e + IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x31e + IMX95_PAD_GPIO_IO06__AONMIX_TOP_PDM_BIT_STREAM_BIT1 0x31e + IMX95_PAD_GPIO_IO12__AONMIX_TOP_PDM_BIT_STREAM_BIT2 0x31e + IMX95_PAD_GPIO_IO13__AONMIX_TOP_PDM_BIT_STREAM_BIT3 0x31e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK 0x31e + IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK 0x31e + IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC 0x31e + IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0 0x31e + IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1 0x31e + IMX95_PAD_ENET2_TD1__NETCMIX_TOP_SAI2_RX_DATA_BIT2 0x31e + IMX95_PAD_ENET2_TD0__NETCMIX_TOP_SAI2_RX_DATA_BIT3 0x31e + IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK 0x31e + IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC 0x31e + IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0 0x31e + IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1 0x31e + IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2 0x31e + IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3 0x31e + IMX95_PAD_XSPI1_DATA0__NETCMIX_TOP_SAI2_TX_DATA_BIT4 0x31e + IMX95_PAD_XSPI1_DATA1__NETCMIX_TOP_SAI2_TX_DATA_BIT5 0x31e + IMX95_PAD_XSPI1_DATA2__NETCMIX_TOP_SAI2_TX_DATA_BIT6 0x31e + IMX95_PAD_XSPI1_DATA3__NETCMIX_TOP_SAI2_TX_DATA_BIT7 0x31e + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x31e + IMX95_PAD_GPIO_IO18__SAI3_RX_BCLK 0x31e + IMX95_PAD_GPIO_IO19__SAI3_RX_SYNC 0x31e + IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x31e + >; + }; + + pinctrl_sai5: sai5grp { + fsl,pins = < + IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0 0x31e + IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0 0x31e + IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK 0x31e + IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC 0x31e + + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + IMX95_PAD_GPIO_IO22__SPDIF_IN 0x31e + IMX95_PAD_GPIO_IO23__SPDIF_OUT 0x31e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e + IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; + +&scmi_misc { + nxp,ctrl-ids = , + , + , + , + ; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + adp-disable; + dr_mode = "host"; + hnp-disable; + srp-disable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&usdhc1 { + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + fsl,tuning-step = <1>; + status = "okay"; +}; + +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&xcvr { + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_SPDIF>, + <&dummy>, + <&scmi_clk IMX95_CLK_AUDIOXCVR>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>; + clock-names = "ipg", "phy", "spba", "pll_ipg", "pll8k", "pll11k"; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SPDIF>, + <&scmi_clk IMX95_CLK_AUDIOXCVR>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + assigned-clock-rates = <3932160000>, <3612672000>, + <393216000>, <361267200>, + <12288000>, <0>; + #sound-dai-cells = <0>; + pinctrl-0 = <&pinctrl_spdif>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts index 7eb12e7..7d820a0 100644 --- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts @@ -553,11 +553,12 @@ &pcie0 { pinctrl-0 = <&pinctrl_pcie0>; pinctrl-names = "default"; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>; vpcie-supply = <®_m2_pwr>; vpcie3v3aux-supply = <®_m2_pwr>; supports-clkreq; - status = "okay"; + status = "disabled"; }; &pcie0_ep { @@ -567,6 +568,10 @@ status = "disabled"; }; +&pcie0_port0 { + reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; +}; + &sai1 { assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, @@ -1137,7 +1142,7 @@ status = "okay"; }; -&usdhc3 { +m2_usdhc: &usdhc3 { bus-width = <4>; keep-power-in-suspend; mmc-pwrseq = <&usdhc3_pwrseq>; diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts index 041fd83..2e463bc 100644 --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts @@ -540,6 +540,7 @@ &pcie0 { pinctrl-0 = <&pinctrl_pcie0>; pinctrl-names = "default"; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie0>; vpcie3v3aux-supply = <®_pcie0>; @@ -550,13 +551,18 @@ &pcie0_ep { pinctrl-0 = <&pinctrl_pcie0>; pinctrl-names = "default"; - vpcie-supply = <®_pcie0>; + vpcie-supply = <®_m2_pwr>; status = "disabled"; }; +&pcie0_port0 { + reset-gpios = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>; +}; + &pcie1 { pinctrl-0 = <&pinctrl_pcie1>; pinctrl-names = "default"; + /* This property is deprecated, use reset-gpios from the Root Port node. */ reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>; vpcie-supply = <®_slot_pwr>; vpcie3v3aux-supply = <®_slot_pwr>; @@ -570,6 +576,10 @@ status = "disabled"; }; +&pcie1_port0 { + reset-gpios = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>; +}; + &sai1 { #sound-dai-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-frdm-pro.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-frdm-pro.dts new file mode 100644 index 0000000..b87a26b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-frdm-pro.dts @@ -0,0 +1,1021 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2026 NXP + */ + +/dts-v1/; + +#include +#include +#include "imx95.dtsi" + +#define FALLING_EDGE 1 +#define RISING_EDGE 2 + +#define BRD_SM_CTRL_SD3_WAKE 0x8000 /*!< PCAL6408A-0 */ +#define BRD_SM_CTRL_PCIE1_WAKE 0x8001 /*!< PCAL6408A-4 */ +#define BRD_SM_CTRL_BT_WAKE 0x8002 /*!< PCAL6408A-5 */ +#define BRD_SM_CTRL_PCIE2_WAKE 0x8003 /*!< PCAL6408A-6 */ +#define BRD_SM_CTRL_BUTTON 0x8004 /*!< PCAL6408A-7 */ + +/ { + model = "NXP FRDM-IMX95-PRO"; + compatible = "fsl,imx95-19x19-frdm-pro", "fsl,imx95"; + + aliases { + ethernet0 = &enetc_port0; + ethernet1 = &enetc_port1; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &lpuart1; + serial4 = &lpuart5; + }; + + bt_sco_codec: bt-sco-codec { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + + flexcan1_phy: can-phy0 { + compatible = "nxp,tja1057"; + #phy-cells = <0>; + max-bitrate = <5000000>; + silent-gpios = <&i2c4_gpio_expander_22 11 GPIO_ACTIVE_HIGH>; + }; + + flexcan3_phy: can-phy2 { + compatible = "nxp,tja1057"; + #phy-cells = <0>; + max-bitrate = <5000000>; + silent-gpios = <&i2c4_gpio_expander_22 13 GPIO_ACTIVE_HIGH>; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + stdout-path = &lpuart1; + }; + + reg_vref_1v8: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "+V1.8_SW"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_SW"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + }; + + reg_dcdc_3v3: regulator-dcdc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "DCDC_3V3"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + vin-supply = <®_dcdc_5v>; + gpio = <&i2c4_gpio_expander_22 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_dcdc_5v: regulator-dcdc-5v { + compatible = "regulator-fixed"; + regulator-name = "DCDC_5V"; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + gpio = <&i2c4_gpio_expander_22 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_exp_1v8: regulator-exp-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EXP_1V8"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + gpio = <&i2c4_gpio_expander_22 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_exp_3v3: regulator-exp-3v3 { + compatible = "regulator-fixed"; + regulator-name = "EXP_3V3"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + vin-supply = <®_dcdc_3v3>; + gpio = <&i2c4_gpio_expander_22 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_exp_5v: regulator-exp-5v { + compatible = "regulator-fixed"; + regulator-name = "EXP_5V"; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + vin-supply = <®_dcdc_5v>; + gpio = <&i2c4_gpio_expander_22 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_exp_12v: regulator-exp-12v { + compatible = "regulator-fixed"; + regulator-name = "VCCEXP_12V"; + regulator-always-on; + regulator-max-microvolt = <12000000>; + regulator-min-microvolt = <12000000>; + gpio = <&i2c4_gpio_expander_22 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_m2_mkey_1_pwr: regulator-m2-mkey-1-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power-mkey-1"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&i2c3_gpio_expander_20 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_m2_mkey_2_pwr: regulator-m2-mkey-2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power-mkey-2"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&i2c3_gpio_expander_20 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_m2_ekey_pwr: regulator-m2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power-ekey"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&i2c4_gpio_expander_22 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VDD_SD2_3V3"; + off-on-delay-us = <12000>; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc3_vmmc: regulator-usdhc3 { + compatible = "regulator-fixed"; + regulator-name = "WLAN_EN"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + vin-supply = <®_m2_ekey_pwr>; + gpio = <&i2c4_gpio_expander_22 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * IW612 wifi chip needs more delay than other wifi chips to complete + * the host interface initialization after power up, otherwise the + * internal state of IW612 may be unstable, resulting in the failure of + * the SDIO3.0 switch voltage. + */ + startup-delay-us = <20000>; + }; + + reg_usb_vbus: regulator-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB_VBUS"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + gpio = <&i2c4_gpio_expander_22 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + linux_cma: linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x80000000 0 0x7F000000>; + reusable; + size = <0 0x3c000000>; + linux,cma-default; + }; + }; + + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-inversion; + simple-audio-card,bitclock-master = <&btcpu>; + simple-audio-card,format = "dsp_a"; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,name = "bt-sco-audio"; + + simple-audio-card,codec { + sound-dai = <&bt_sco_codec 1>; + }; + + btcpu: simple-audio-card,cpu { + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + sound-dai = <&sai5>; + }; + }; + + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + format = "i2s"; + link-name = "micfil hifi"; + + cpu { + sound-dai = <&micfil>; + }; + }; + }; + + sound-mqs { + compatible = "audio-graph-card2"; + links = <&sai1_port1>; + label = "mqs-audio"; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&i2c4_gpio_expander_22 9 GPIO_ACTIVE_LOW>; + }; + + memory@80000000 { + reg = <0x0 0x80000000 0 0x80000000>; + device_type = "memory"; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&enetc_port0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + pinctrl-0 = <&pinctrl_enetc0>; + pinctrl-names = "default"; + status = "okay"; +}; + +&enetc_port1 { + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + pinctrl-0 = <&pinctrl_enetc1>; + pinctrl-names = "default"; + status = "okay"; +}; + +&flexcan1 { + phys = <&flexcan1_phy>; + pinctrl-0 = <&pinctrl_flexcan1>; + pinctrl-names = "default"; + status = "reserved"; +}; + +&flexcan3 { + phys = <&flexcan3_phy>; + pinctrl-0 = <&pinctrl_flexcan3>; + pinctrl-names = "default"; + status = "okay"; +}; + +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-names = "default"; + status = "okay"; + + i2c3_gpio_expander_20: i2c3-gpio-expander@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio5>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + pinctrl-0 = <&pinctrl_pcal6416>; + pinctrl-names = "default"; + }; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x50>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ptn5110>; + pinctrl-names = "default"; + + typec_con: connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C"; + op-sink-microwatt = <0>; + power-role = "dual"; + self-powered; + sink-pdos = ; + source-pdos = ; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec_con_hs: endpoint { + remote-endpoint = <&usb3_data_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_con_ss: endpoint { + remote-endpoint = <&usb3_data_ss>; + }; + }; + }; + }; + }; +}; + +&lpi2c4 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c4>; + pinctrl-names = "default"; + status = "okay"; + + i2c4_gpio_expander_22: i2c4-gpio-expander@22 { + compatible = "nxp,pcal6524"; + reg = <0x22>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = "USB2 Power Enable", + "DCDC5V Enable", + "", + "SE Enable", + "", + "EXP 5V Enable", + "EXP 3V3 Enable", + "WIFI Power Enable", + "M2 DIS1 B", + "WIFI SD3 Reset", + "EXP 1V8 Enable", + "CAN1 Standby", + "M2 DIS2", + "CAN2 Standby", + "ETH 10G IO4", + "ETH 10G IO3", + "SPI3/GPIO select", + "EXP 12V Enable", + "DCDC 3V3 Enable", + "PCIE1 Reset", + "", + "ETH 10G CLK Enable", + "LVDS to HDMI converter IT6263 reset", + ""; + + /* When high, select lpspi; When low, select gpio. */ + lpspi-gpio-sel-hog { + gpios = <16 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + }; +}; + +&lpuart1 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&lpuart5 { + /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +&micfil { + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_PDM>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <49152000>; + #sound-dai-cells = <0>; + pinctrl-0 = <&pinctrl_pdm>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mqs1 { + clocks = <&scmi_clk IMX95_CLK_SAI1>; + clock-names = "mclk"; + pinctrl-0 = <&pinctrl_mqs1>; + pinctrl-names = "default"; + status = "okay"; + + mqs1_port: port { + mqs1_ep: endpoint { + dai-format = "left_j"; + remote-endpoint = <&sai1_port1_ep>; + }; + }; +}; + +&netc_blk_ctrl { + status = "okay"; +}; + +&netc_emdio { + pinctrl-0 = <&pinctrl_emdio>; + pinctrl-names = "default"; + status = "okay"; + + ethphy0: ethernet-phy@1 { + reg = <1>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&i2c3_gpio_expander_20 1 GPIO_ACTIVE_LOW>; + }; + + ethphy1: ethernet-phy@2 { + reg = <2>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&i2c3_gpio_expander_20 2 GPIO_ACTIVE_LOW>; + }; +}; + +&netc_timer { + status = "okay"; +}; + +&netcmix_blk_ctrl { + status = "okay"; +}; + +&pcie0 { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + reset-gpio = <&i2c4_gpio_expander_22 19 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_m2_mkey_1_pwr>; + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + reset-gpio = <&i2c3_gpio_expander_20 9 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_m2_mkey_2_pwr>; + status = "okay"; +}; + +&sai1 { + clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>, + <&scmi_clk IMX95_CLK_SAI1>, <&dummy>, + <&dummy>, <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI1>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <24576000>; + #sound-dai-cells = <0>; + fsl,sai-mclk-direction-output; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* leave unconnected - no RX in the context of MQS */ + port@0 { + reg = <0>; + + endpoint { + }; + }; + + sai1_port1: port@1 { + reg = <1>; + mclk-fs = <512>; + + sai1_port1_ep: endpoint { + dai-format = "left_j"; + system-clock-direction-out; + bitclock-master; + frame-master; + remote-endpoint = <&mqs1_ep>; + }; + }; + }; +}; + +&sai5 { + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI5>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + #sound-dai-cells = <0>; + pinctrl-0 = <&pinctrl_sai5>; + pinctrl-names = "default"; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&scmi_iomuxc { + pinctrl-0 = <&pinctrl_hog>; + pinctrl-names = "default"; + + pinctrl_emdio: emdiogrp { + fsl,pins = < + IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC 0x50e + IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO 0x90e + >; + }; + + pinctrl_enetc0: enetc0grp { + fsl,pins = < + IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x50e + IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x50e + IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x50e + IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x50e + IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e + IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e + IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e + IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e + IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e + IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e + IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e + IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e + >; + }; + + pinctrl_enetc1: enetc1grp { + fsl,pins = < + IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x50e + IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x50e + IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x50e + IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x50e + IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x57e + IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x58e + IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x57e + IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x58e + IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x57e + IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x57e + IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x57e + IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x57e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + IMX95_PAD_SAI1_TXD0__AONMIX_TOP_CAN1_TX 0x39e + IMX95_PAD_SAI1_TXC__AONMIX_TOP_CAN1_RX 0x39e + >; + }; + + pinctrl_flexcan3: flexcan3grp { + fsl,pins = < + IMX95_PAD_CCM_CLKO3__CAN3_TX 0x39e + IMX95_PAD_CCM_CLKO4__CAN3_RX 0x39e + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x31e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = < + IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e + IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e + >; + }; + + pinctrl_mqs1: mqs1grp { + fsl,pins = < + IMX95_PAD_SAI1_TXFS__AONMIX_TOP_MQS1_LEFT 0x31e + IMX95_PAD_SAI1_RXD0__AONMIX_TOP_MQS1_RIGHT 0x31e + >; + }; + + pinctrl_pcal6416: pcal6416grp { + fsl,pins = < + IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x31e + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x4000031e + >; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = < + IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x4000031e + >; + }; + + pinctrl_pdm: pdmgrp { + fsl,pins = < + IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK 0x31e + IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x31e + >; + }; + + pinctrl_ptn5110: ptn5110grp { + fsl,pins = < + IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8 0x31e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e + >; + }; + + pinctrl_sai5: sai5grp { + fsl,pins = < + IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0 0x31e + IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK 0x31e + IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC 0x31e + IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0 0x31e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e + IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + IMX95_PAD_DAP_TDI__LPUART5_RX 0x31e + IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e + IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e + IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e + IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e + IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e + IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e + IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e + IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e + IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e + IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e + IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD3_CLK__USDHC3_CLK 0x15fe + IMX95_PAD_SD3_CMD__USDHC3_CMD 0x13fe + IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x13fe + IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x13fe + IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x13fe + IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x13fe + >; + }; +}; + +&scmi_misc { + nxp,ctrl-ids = ; +}; + +&thermal_zones { + pf09-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 2>; + + trips { + pf09_alert: trip0 { + hysteresis = <2000>; + temperature = <140000>; + type = "passive"; + }; + + pf09_crit: trip1 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; + + pf53arm-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 4>; + + cooling-maps { + map0 { + cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + trip = <&pf5301_alert>; + }; + }; + + trips { + pf5301_alert: trip0 { + hysteresis = <2000>; + temperature = <140000>; + type = "passive"; + }; + + pf5301_crit: trip1 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; + + pf53soc-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 3>; + + trips { + pf5302_alert: trip0 { + hysteresis = <2000>; + temperature = <140000>; + type = "passive"; + }; + + pf5302_crit: trip1 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; +}; + +&usb2 { + disable-over-current; + dr_mode = "host"; + vbus-supply = <®_usb_vbus>; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + adp-disable; + dr_mode = "otg"; + hnp-disable; + role-switch-default-mode = "peripheral"; + srp-disable; + usb-role-switch; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + status = "okay"; + + port { + usb3_data_hs: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; +}; + +&usb3_phy { + orientation-switch; + fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>; + fsl,phy-pcs-tx-swing-full-percent = <100>; + fsl,phy-tx-preemp-amp-tune-microamp = <600>; + fsl,phy-tx-vboost-level-microvolt = <1156>; + fsl,phy-tx-vref-tune-percent = <100>; + status = "okay"; + + port { + usb3_data_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; +}; + +&usdhc1 { + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + status = "okay"; +}; + +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + bus-width = <4>; + keep-power-in-suspend; + mmc-pwrseq = <&usdhc3_pwrseq>; + non-removable; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + vmmc-supply = <®_usdhc3_vmmc>; + wakeup-source; + status = "okay"; +}; + +&wdog3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-aquila-clover.dts b/arch/arm64/boot/dts/freescale/imx95-aquila-clover.dts new file mode 100644 index 0000000..fd93043 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-aquila-clover.dts @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95 + * https://www.toradex.com/products/carrier-board/clover + */ + +/dts-v1/; + +#include +#include +#include "imx95-aquila.dtsi" + +/ { + model = "Aquila iMX95 on Aquila Clover Board"; + compatible = "toradex,aquila-imx95-clover", + "toradex,aquila-imx95", + "fsl,imx95"; + + aliases { + eeprom1 = &carrier_eeprom; + }; + + dp_1_connector: dp0-connector { + compatible = "dp-connector"; + dp-pwr-supply = <®_dp_3p3v>; + type = "full-size"; + + port { + dp_1_connector_in: endpoint { + remote-endpoint = <&dsi2dp_out>; + }; + }; + }; + + reg_dp_3p3v: regulator-dp-3p3v { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_21_dp>; + /* Aquila GPIO_21_DP */ + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "DP_3V3"; + startup-delay-us = <10000>; + }; +}; + +/* Aquila ADC_[1-4] */ +&adc1 { + status = "okay"; +}; + +/* Aquila CTRL_WAKE1_MICO# */ +&aquila_key_wake { + status = "okay"; +}; + +&dsi2dp_out { + remote-endpoint = <&dp_1_connector_in>; +}; + +/* Aquila ETH_1 */ +&enetc_port0 { + status = "okay"; +}; + +/* Aquila CAN_1 */ +&flexcan1 { + status = "okay"; +}; + +/* Aquila CAN_2 */ +&flexcan2 { + status = "okay"; +}; + +/* Aquila CAN_3 */ +&flexcan3 { + status = "okay"; +}; + +/* Aquila CAN_4 */ +&flexcan4 { + status = "okay"; +}; + +/* Aquila QSPI_1 */ +&flexspi1 { + pinctrl-0 = <&pinctrl_flexspi1_4bit>, + <&pinctrl_qspi_cs1>; + + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_1>, + <&pinctrl_gpio_2>, + <&pinctrl_gpio_3>, + <&pinctrl_gpio_4>; +}; + +/* Aquila I2C_2 */ +&i3c2 { + status = "okay"; +}; + +/* Aquila I2C_1 */ +&lpi2c2 { + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + cooling-levels = <255>; + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + + temperature-sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + /* USB-C OTG (TCPC USB PD PHY) */ + tcpc@52 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x52>; + interrupt-parent = <&som_gpio_expander_1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + op-sink-microwatt = <0>; + power-role = "dual"; + self-powered; + sink-pdos = ; + source-pdos = ; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec_con_hs: endpoint { + remote-endpoint = <&usb1_con_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_con_ss: endpoint { + remote-endpoint = <&usb1_con_ss>; + }; + }; + }; + }; + }; + + carrier_eeprom: eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Aquila I2C_6 */ +&lpi2c5 { + status = "okay"; +}; + +/* Aquila SPI_1 */ +&lpspi6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi6 &pinctrl_gpio_5>; + cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>, <&gpio4 18 GPIO_ACTIVE_LOW>; + + status = "okay"; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_6>; + interrupt-parent = <&gpio4>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <12000000>; + }; +}; + +/* Aquila UART_3, used as the Linux Console */ +&lpuart1 { + status = "okay"; +}; + +/* Aquila UART_4 */ +&lpuart2 { + status = "okay"; +}; + +/* Aquila UART_1 */ +&lpuart3 { + status = "okay"; +}; + +/* Aquila UART_2 */ +&lpuart7 { + status = "okay"; +}; + +/* Aquila PCIE_1 */ +&pcie0 { + status = "okay"; +}; + +/* Aquila PWM_1 */ +&tpm3 { + status = "okay"; +}; + +/* Aquila PWM_3_DSI and PWM_4_DP */ +&tpm5 { + status = "okay"; +}; + +/* Aquila PWM_2 */ +&tpm6 { + status = "okay"; +}; + +/* Aquila USB_2, optional Bluetooth USB */ +&usb2 { + status = "okay"; +}; + +/* Aquila USB_1 */ +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + status = "okay"; + + port { + usb1_con_hs: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; +}; + +&usb3_phy { + orientation-switch; + + status = "okay"; + + port { + usb1_con_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; +}; + +/* Aquila SD_1 */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-aquila-dev.dts b/arch/arm64/boot/dts/freescale/imx95-aquila-dev.dts new file mode 100644 index 0000000..3df1770 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-aquila-dev.dts @@ -0,0 +1,389 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95 + * https://www.toradex.com/products/carrier-board/aquila-development-board-kit + */ + +/dts-v1/; + +#include +#include +#include "imx95-aquila.dtsi" + +/ { + model = "Aquila iMX95 on Aquila Development Board"; + compatible = "toradex,aquila-imx95-dev", + "toradex,aquila-imx95", + "fsl,imx95"; + + aliases { + eeprom1 = &carrier_eeprom; + }; + + dp_1_connector: dp0-connector { + compatible = "dp-connector"; + dp-pwr-supply = <®_dp_3p3v>; + type = "full-size"; + + port { + dp_1_connector_in: endpoint { + remote-endpoint = <&dsi2dp_out>; + }; + }; + }; + + reg_carrier_1p8v: regulator-carrier-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-carrier 1V8"; + }; + + reg_dp_3p3v: regulator-dp-3p3v { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_21_dp>; + /* Aquila GPIO_21_DP */ + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "DP_3V3"; + startup-delay-us = <10000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "aquila-wm8904"; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Microphone Jack", "MICBIAS", + "IN1L", "Microphone Jack", + "IN1R", "Digital Mic"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Digital Mic", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + + codec_dai: simple-audio-card,codec { + sound-dai = <&wm8904_1a>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +/* Aquila ADC_[1-4] */ +&adc1 { + status = "okay"; +}; + +/* Aquila CTRL_WAKE1_MICO# */ +&aquila_key_wake { + status = "okay"; +}; + +&dsi2dp_out { + remote-endpoint = <&dp_1_connector_in>; +}; + +/* Aquila ETH_1 */ +&enetc_port0 { + status = "okay"; +}; + +/* Aquila CAN_1 */ +&flexcan1 { + status = "okay"; +}; + +/* Aquila CAN_2 */ +&flexcan2 { + status = "okay"; +}; + +/* Aquila CAN_3 */ +&flexcan3 { + status = "okay"; +}; + +/* Aquila CAN_4 */ +&flexcan4 { + status = "okay"; +}; + +/* Aquila QSPI_1 */ +&flexspi1 { + pinctrl-0 = <&pinctrl_flexspi1_4bit>, + <&pinctrl_qspi_cs1>; + + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_8>; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_1>, + <&pinctrl_gpio_2>, + <&pinctrl_gpio_3>, + <&pinctrl_gpio_4>, + <&pinctrl_gpio_5>, + <&pinctrl_gpio_6>, + <&pinctrl_gpio_7>; +}; + +/* Aquila I2C_1 */ +&lpi2c2 { + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + cooling-levels = <255>; + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + + wm8904_1a: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2_mclk>; + clocks = <&scmi_clk IMX95_CLK_SAI2>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + AVDD-supply = <®_carrier_1p8v>; + CPVDD-supply = <®_carrier_1p8v>; + DBVDD-supply = <®_carrier_1p8v>; + DCVDD-supply = <®_carrier_1p8v>; + MICVDD-supply = <®_carrier_1p8v>; + wlf,drc-cfg-names = "default", "peaklimiter"; + /* + * Config registers per name, respectively: + * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1 + * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1 + */ + wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>, + /bits/ 16 <0x04af 0x324b 0x0010 0x0408>; + /* GPIO1 = DMIC_CLK, don't touch others */ + wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>; + wlf,in1r-as-dmicdat2; + }; + + /* Current measurement into module VCC */ + hwmon@41 { + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + /* USB-C OTG (TCPC USB PD PHY) */ + tcpc@52 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x52>; + interrupt-parent = <&som_gpio_expander_1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + op-sink-microwatt = <0>; + power-role = "dual"; + self-powered; + sink-pdos = ; + source-pdos = ; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec_con_hs: endpoint { + remote-endpoint = <&usb1_con_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_con_ss: endpoint { + remote-endpoint = <&usb1_con_ss>; + }; + }; + }; + }; + }; + + carrier_eeprom: eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Aquila I2C_2 */ +&i3c2 { + status = "okay"; +}; + +/* Aquila I2C_4_CSI1 */ +&lpi2c4 { + status = "okay"; +}; + +/* Aquila I2C_6 */ +&lpi2c5 { + status = "okay"; +}; + +/* Aquila I2C_3_DSI1/I2C_5_CSI2 */ +&lpi2c8 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + /* I2C on DSI Connector Pin #4 and #6 */ + i2c_dsi_0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* I2C on DSI Connector Pin #52 and #54 */ + i2c_dsi_1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* Aquila SPI_1 */ +&lpspi6 { + status = "okay"; +}; + +/* Aquila UART_3, used as the Linux Console */ +&lpuart1 { + status = "okay"; +}; + +/* Aquila UART_4 */ +&lpuart2 { + status = "okay"; +}; + +/* Aquila UART_1 */ +&lpuart3 { + status = "okay"; +}; + +/* Aquila UART_2 as RS485 */ +&lpuart7 { + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + + status = "okay"; +}; + +/* Aquila PCIE_1 */ +&pcie0 { + status = "okay"; +}; + +/* Aquila I2S_1 */ +&sai2 { + status = "okay"; +}; + +/* Aquila PWM_1 */ +&tpm3 { + status = "okay"; +}; + +/* Aquila PWM_2 */ +&tpm6 { + status = "okay"; +}; + +/* Aquila PWM_3_DSI and PWM_4_DP */ +&tpm5 { + status = "okay"; +}; + +/* Aquila USB_2, optional Bluetooth USB */ +&usb2 { + status = "okay"; +}; + +/* Aquila USB_1 */ +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + status = "okay"; + + port { + usb1_con_hs: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; +}; + +&usb3_phy { + orientation-switch; + + status = "okay"; + + port { + usb1_con_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; +}; + +/* Aquila SD_1 */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-aquila.dtsi b/arch/arm64/boot/dts/freescale/imx95-aquila.dtsi new file mode 100644 index 0000000..69dc962 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-aquila.dtsi @@ -0,0 +1,1160 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95 + */ + +#include +#include "imx95.dtsi" + +/ { + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + can2 = &flexcan3; + can3 = &flexcan4; + eeprom0 = &som_eeprom; + ethernet0 = &enetc_port0; + i2c0 = &lpi2c3; + i2c1 = &lpi2c2; + i2c2 = &i3c2; + i2c3 = &lpi2c8; + i2c4 = &lpi2c4; + i2c6 = &lpi2c5; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + rtc0 = &rtc_i2c; + rtc1 = &scmi_bbm; + serial0 = &lpuart3; + serial1 = &lpuart7; + serial2 = &lpuart1; + serial3 = &lpuart2; + usb0 = &usb3; + usb1 = &usb2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aquila_key_wake: gpio-key-wakeup { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_wake1_mico>; + + status = "disabled"; + + key-wakeup { + /* Aquila CTRL_WAKE1_MICO# */ + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + label = "Wake Up"; + wakeup-source; + linux,code = ; + }; + }; + + clk_dsi2dp_refclk: clock-dsi2dp-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + clk_dsi2dp_refclk_en: clock-dsi2dp-refclk-en { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_dp_clk_en>; + clocks = <&clk_dsi2dp_refclk>; + #clock-cells = <0>; + /* CTRL_DP_CLK_EN */ + enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + clk_serdes_eth_ref: clock-serdes-eth-ref { + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + /* CTRL_ETH_REF_CLK_STBY */ + enable-gpios = <&som_gpio_expander_0 6 GPIO_ACTIVE_LOW>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8"; + }; + + reg_dp_1p2v: regulator-dp-1p2v { + compatible = "regulator-fixed"; + /* CTRL_DP_BRIDGE_EN */ + gpios = <&som_gpio_expander_0 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "On-module +V1.2_DP"; + vin-supply = <®_1p8v>; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + /* Aquila USB_1_EN */ + gpios = <&som_gpio_expander_0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "USB_1_EN"; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + /* Aquila USB_2_EN */ + gpios = <&som_gpio_expander_0 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "USB_2_H_EN"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1_pwr_en>; + /* Aquila SD_1_PWR_EN */ + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <100000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "SD_1_PWR_EN"; + startup-delay-us = <20000>; + }; + + reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc { + compatible = "regulator-gpio"; + /* PMIC_SD_1_VSEL */ + gpios = <&som_gpio_expander_1 9 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "PMIC_SD_1_VSEL"; + states = <1800000 0x1>, + <3300000 0x0>; + }; + + remoteproc-cm7 { + compatible = "fsl,imx95-cm7"; + mboxes = <&mu7 0 1 &mu7 1 1 &mu7 3 1>; + mbox-names = "tx", "rx", "rxdb"; + memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, + <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>, <&m7_reserved>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux_cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x3c000000>; + alloc-ranges = <0 0x80000000 0 0x7f000000>; + linux,cma-default; + }; + + m7_reserved: memory@80000000 { + reg = <0 0x80000000 0 0x1000000>; + no-map; + }; + + rsc_table: rsc-table@88220000 { + reg = <0 0x88220000 0 0x1000>; + no-map; + }; + + vdev0vring0: vdev0vring0@88000000 { + reg = <0 0x88000000 0 0x8000>; + no-map; + }; + + vdev0vring1: vdev0vring1@88008000 { + reg = <0 0x88008000 0 0x8000>; + no-map; + }; + + vdev1vring0: vdev1vring0@88010000 { + reg = <0 0x88010000 0 0x8000>; + no-map; + }; + + vdev1vring1: vdev1vring1@88018000 { + reg = <0 0x88018000 0 0x8000>; + no-map; + }; + + vdevbuffer: vdevbuffer@88020000 { + compatible = "shared-dma-pool"; + reg = <0 0x88020000 0 0x100000>; + no-map; + }; + }; +}; + +/* Aquila ADC_[1-4] */ +&adc1 { + vref-supply = <®_1p8v>; +}; + +/* Aquila ETH_1 */ +&enetc_port0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enetc0>; + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; +}; + +/* Aquila CAN_1 */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +/* Aquila CAN_2 */ +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; +}; + +/* Aquila CAN_3 */ +&flexcan3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan3>; +}; + +/* Aquila CAN_4 */ +&flexcan4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan4>; +}; + +/* Aquila QSPI_1 */ +&flexspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi1_8bit>, + <&pinctrl_qspi_cs1>; +}; + +&gpio1 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AQUILA_C24", /* 10 */ + "", + "AQUILA_B17", + "CTRL_GPIO_EXP_INT#", + "AQUILA_B18"; + + status = "okay"; +}; + +&gpio2 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", + "", + "AQUILA_B42", + "", + "AQUILA_B43"; +}; + +&gpio3 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "AQUILA_A11", + "", /* 20 */ + "AQUILA_B57", + "AQUILA_B19"; +}; + +&gpio4 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "AQUILA_C22", + "AQUILA_C21", + "AQUILA_C20", + "", /* 20 */ + "", + "", + "AQUILA_C23", + "AQUILA_D23", + "AQUILA_D24", + "", + "AQUILA_D25"; +}; + +&gpio5 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "AQUILA_B44", + "AQUILA_B45"; +}; + +/* Aquila I2C_2 */ +&i3c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i3c2>; + i2c-scl-hz = <100000>; +}; + +/* Aquila I2C_1 */ +&lpi2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-1 = <&pinctrl_lpi2c2_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* On-module I2C - I2C_SOM */ +&lpi2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c3>, <&pinctrl_ctrl_gpio_exp_int>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>, <&pinctrl_ctrl_gpio_exp_int>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + status = "okay"; + + som_gpio_expander_0: gpio@20 { + compatible = "nxp,pcal6408"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "AQUILA_C38", /* 0 */ + "PCIE_2_RESET#", + "AQUILA_B77", + "USB_2_H_EN", + "BT_DISABLE#", + "WIFI_DISABLE#", + "CTRL_ETH_REF_CLK_STBY", + "CTRL_DP_BRIDGE_EN"; + }; + + som_gpio_expander_1: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "AQUILA_C1", /* 0 */ + "AQUILA_C2", + "AQUILA_C3", + "AQUILA_C4", + "AQUILA_C36", + "AQUILA_B74", + "AQUILA_B75", + "USB_2_H_OC#", + "AQUILA_B81", + "PMIC_SD_1_VSEL", + "ETH_1_INT#", /* 10 */ + "CTRL_TPM_INT#", + "SPI_2_CS2_TPM", + "PCIE_WAKE_WIFI#", + "WIFI_WAKE_BT", + "WIFI_WAKEUP_HOST"; + }; + + som_dsi2dp_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + clocks = <&clk_dsi2dp_refclk_en>; + clock-names = "refclk"; + vcc-supply = <®_dp_1p2v>; + vcca-supply = <®_dp_1p2v>; + vccio-supply = <®_1p8v>; + vpll-supply = <®_1p8v>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi2dp_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + + dsi2dp_out: endpoint { + data-lanes = <3 2 1 0>; + }; + }; + }; + }; + + rtc_i2c: rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp1075"; + reg = <0x48>; + }; + + som_eeprom: eeprom@50 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +/* Aquila I2C_4_CSI1 */ +&lpi2c4 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c4>; + pinctrl-1 = <&pinctrl_lpi2c4_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + scl-gpios = <&gpio2 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* Aquila I2C_6 */ +&lpi2c5 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + scl-gpios = <&gpio2 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* Aquila I2C_3_DSI1/I2C_5_CSI2 */ +&lpi2c8 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c8>; + pinctrl-1 = <&pinctrl_lpi2c8_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + scl-gpios = <&gpio2 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* Aquila SPI_2 */ +&lpspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi4>; + cs-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>, + <&som_gpio_expander_1 12 GPIO_ACTIVE_LOW>; + + status = "okay"; + + som_tpm: tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0x1>; + interrupt-parent = <&som_gpio_expander_1>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + /* + * Maximum TPM-supported speed is 18.5 MHz, limited to 12 MHz + * here as lpspi4's per-clock (2x the max speed) is 24 MHz. + */ + spi-max-frequency = <12000000>; + }; +}; + +/* Aquila SPI_1 */ +&lpspi6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi6>; + cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; +}; + +/* Aquila UART_3, used as the Linux Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +/* Aquila UART_4 */ +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +/* Aquila UART_1 */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; +}; + +/* Aquila UART_2 */ +&lpuart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + uart-has-rtscts; +}; + +&mu7 { + status = "okay"; +}; + +/* Aquila ETH_2_XGMII_MDIO, shared between all ethernet ports */ +&netc_emdio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emdio>; + + status = "okay"; + + ethphy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&som_gpio_expander_1>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + }; +}; + +&netcmix_blk_ctrl { + status = "okay"; +}; + +&netc_blk_ctrl { + status = "okay"; +}; + +&netc_timer { + status = "okay"; +}; + +/* Aquila PCIE_1 */ +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpios = <&som_gpio_expander_0 0 GPIO_ACTIVE_LOW>; +}; + +/* On-module Wi-Fi or Aquila PCIE_2 */ +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie1>; + reset-gpios = <&som_gpio_expander_0 1 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +/* Aquila I2S_1 */ +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI2>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + #sound-dai-cells = <0>; + fsl,sai-mclk-direction-output; +}; + +&scmi_bbm { + linux,code = ; +}; + +&thermal_zones { + /* PF09 Main PMIC */ + pf09-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 2>; + + trips { + trip0 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; + + /* PF53 VDD_ARM PMIC */ + pf53-arm-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 4>; + + trips { + trip0 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; + + /* PF53 VDD_SOC PMIC */ + pf53-soc-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 3>; + + trips { + trip0 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; +}; + +/* Aquila PWM_1 */ +&tpm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +/* Aquila PWM_2 */ +&tpm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; +}; + +/* Aquila PWM_3_DSI and PWM_4_DP */ +&tpm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3_dsi>, <&pinctrl_pwm4_dp>; +}; + +/* Aquila USB_2, optional Bluetooth USB */ +&usb2 { + dr_mode = "host"; + vbus-supply = <®_usb2_vbus>; +}; + +/* Aquila USB_1 */ +&usb3 { + fsl,disable-port-power-control; +}; + +&usb3_dwc3 { + dr_mode = "otg"; + adp-disable; + hnp-disable; + srp-disable; + usb-role-switch; +}; + +&usb3_phy { + vbus-supply = <®_usb1_vbus>; +}; + +/* On-module eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + + status = "okay"; +}; + +/* Aquila SD_1 */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_sd1_cd_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_sd1_cd_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>,<&pinctrl_sd1_cd_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_sd1_cd_gpio>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_usdhc2_vqmmc>; +}; + +&wdog3 { + fsl,ext-reset-output; + + status = "okay"; +}; + +&scmi_iomuxc { + /* Aquila CTRL_WAKE1_MICO# */ + pinctrl_ctrl_wake1_mico: ctrlwake1micogrp { + fsl,pins = ; /* Aquila D6 */ + }; + + pinctrl_ctrl_dp_clk_en: dpclkengrp { + fsl,pins = ; /* CTRL_DP_CLK_EN */ + }; + + /* Aquila ETH_2_XGMII_MDIO */ + pinctrl_emdio: emdiogrp { + fsl,pins = , /* Aquila B90 */ + ; /* Aquila B89 */ + }; + + /* Aquila ETH_1 */ + pinctrl_enetc0: enetc0grp { + fsl,pins = , /* ENET1_TX_CTL */ + , /* ENET1_TXC */ + , /* ENET1_TDO */ + , /* ENET1_TD1 */ + , /* ENET1_TD2 */ + , /* ENET1_TD3 */ + , /* ENET1_RX_CTL */ + , /* ENET1_RXC */ + , /* ENET1_RD0 */ + , /* ENET1_RD1 */ + , /* ENET1_RD2 */ + ; /* ENET1_RD3 */ + }; + + /* Aquila CAN_1 */ + pinctrl_flexcan1: flexcan1grp { + fsl,pins = , /* Aquila B48 */ + ; /* Aquila B49 */ + }; + + /* Aquila CAN_2 */ + pinctrl_flexcan2: flexcan2grp { + fsl,pins = , /* Aquila B50 */ + ; /* Aquila B51 */ + }; + + /* Aquila CAN_3 */ + pinctrl_flexcan3: flexcan3grp { + fsl,pins = , /* Aquila B53 */ + ; /* Aquila B54 */ + }; + + /* Aquila CAN_4 */ + pinctrl_flexcan4: flexcan4grp { + fsl,pins = , /* Aquila B55 */ + ; /* Aquila B56 */ + }; + + /* Aquila QSPI_1 (4 bit) */ + pinctrl_flexspi1_4bit: flexspi14bitgrp { + fsl,pins = , /* Aquila B65 */ + , /* Aquila B68 */ + , /* Aquila B67 */ + , /* Aquila B61 */ + , /* Aquila B60 */ + ; /* Aquila B63 */ + }; + + /* Aquila QSPI_1 (8 bit) */ + pinctrl_flexspi1_8bit: flexspi18bitgrp { + fsl,pins = , /* Aquila B65 */ + , /* Aquila B68 */ + , /* Aquila B67 */ + , /* Aquila B61 */ + , /* Aquila B60 */ + , /* Aquila B70 */ + , /* Aquila B71 */ + , /* Aquila B72 */ + , /* Aquila B73 */ + ; /* Aquila B63 */ + }; + + /* Aquila GPIO_01 */ + pinctrl_gpio_1: gpio1grp { + fsl,pins = ; /* Aquila D23 */ + }; + + /* Aquila GPIO_02 */ + pinctrl_gpio_2: gpio2grp { + fsl,pins = ; /* Aquila D24 */ + }; + + /* Aquila GPIO_03 */ + pinctrl_gpio_3: gpio3grp { + fsl,pins = ; /* Aquila D25 */ + }; + + /* Aquila GPIO_04 */ + pinctrl_gpio_4: gpio4grp { + fsl,pins = ; /* Aquila C20 */ + }; + + /* Aquila GPIO_05 */ + pinctrl_gpio_5: gpio5grp { + fsl,pins = ; /* Aquila C21 */ + }; + + /* Aquila GPIO_06 */ + pinctrl_gpio_6: gpio6grp { + fsl,pins = ; /* Aquila C22 */ + }; + + /* Aquila GPIO_07 */ + pinctrl_gpio_7: gpio7grp { + fsl,pins = ; /* Aquila C23 */ + }; + + /* Aquila GPIO_08 */ + pinctrl_gpio_8: gpio8grp { + fsl,pins = ; /* Aquila C24 */ + }; + + /* Aquila GPIO_09_CSI_1 */ + pinctrl_gpio_9_csi_1: gpio9csi1grp { + fsl,pins = ; /* Aquila B17 */ + }; + + /* Aquila GPIO_10_CSI_1 */ + pinctrl_gpio_10_csi_1: gpio10csi1grp { + fsl,pins = ; /* Aquila B18 */ + }; + + /* Aquila GPIO_11_CSI_1 */ + pinctrl_gpio_11_csi_1: gpio11csi1grp { + fsl,pins = ; /* Aquila A11*/ + }; + + /* Aquila GPIO_12_CSI_1 */ + pinctrl_gpio_12_csi_1: gpio12csi1grp { + fsl,pins = ; /* Aquila B19 */ + }; + + /* Aquila GPIO_17_DSI_1 */ + pinctrl_gpio_17_dsi_1: gpio17dsi1grp { + fsl,pins = ; /* Aquila B42 */ + }; + + /* Aquila GPIO_18_DSI_1 */ + pinctrl_gpio_18_dsi_1: gpio18dsi1grp { + fsl,pins = ; /* Aquila B43 */ + }; + + /* Aquila GPIO_19_DSI_1 */ + pinctrl_gpio_19_dsi_1: gpio19dsi1grp { + fsl,pins = ; /* Aquila B44 */ + }; + + /* Aquila GPIO_20_DSI_1 */ + pinctrl_gpio_20_dsi_1: gpio20dsi1grp { + fsl,pins = ; /* Aquila B45 */ + }; + + /* Aquila GPIO_21_DP */ + pinctrl_gpio_21_dp: gpio21dpgrp { + fsl,pins = ; /* Aquila B57 */ + }; + + pinctrl_ctrl_gpio_exp_int: gpioexpintgrp { + fsl,pins = ; /* CTRL_GPIO_EXP_INT# */ + }; + + /* Aquila I2C_2 */ + pinctrl_i3c2: i3c2cgrp { + fsl,pins = , /* Aquila C17 */ + ; /* Aquila C16 */ + }; + + /* Aquila I2C_1 as GPIOs */ + pinctrl_lpi2c2_gpio: lpi2c2gpiogrp { + fsl,pins = , /* Aquila D8 */ + ; /* Aquila D7 */ + }; + + /* Aquila I2C_1 */ + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = , /* Aquila D8 */ + ; /* Aquila D7 */ + }; + + /* On-module I2C as GPIOs */ + pinctrl_lpi2c3_gpio: lpi2c3gpiogrp { + fsl,pins = , /* I2C_SOM_SDA */ + ; /* I2C_SOM_SCL */ + }; + + /* On-module I2C */ + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = , /* I2C_SOM_SDA */ + ; /* I2C_SOM_SCL */ + }; + + /* Aquila I2C_4_CSI1 as GPIO */ + pinctrl_lpi2c4_gpio: lpi2c4gpiogrp { + fsl,pins = , /* Aquila A12 */ + ; /* Aquila A13 */ + }; + + /* Aquila I2C_4_CSI1 */ + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = , /* Aquila A12 */ + ; /* Aquila A13 */ + }; + + /* Aquila I2C_6 as GPIO */ + pinctrl_lpi2c5_gpio: lpi2c5gpiogrp { + fsl,pins = , /* Aquila C18 */ + ; /* Aquila C19 */ + }; + + /* Aquila I2C_6 */ + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = , /* Aquila C18 */ + ; /* Aquila C19 */ + }; + + /* Aquila I2C_3_DSI1/I2C_5_CSI2 as GPIO */ + pinctrl_lpi2c8_gpio: lpi2c8gpiogrp { + fsl,pins = , /* Aquila C5/B40 */ + ; /* Aquila C6/B41 */ + }; + + /* Aquila I2C_3_DSI1/I2C_5_CSI2 */ + pinctrl_lpi2c8: lpi2c8grp { + fsl,pins = , /* Aquila C5/B40 */ + ; /* Aquila C6/B41 */ + }; + + /* Aquila SPI_2 */ + pinctrl_lpspi4: lpspi4grp { + fsl,pins = , /* Aquila D16 */ + , /* Aquila D15 */ + , /* Aquila D17 */ + ; /* Aquila D14 */ + }; + + /* Aquila SPI_1 */ + pinctrl_lpspi6: lpspi6grp { + fsl,pins = , /* Aquila D9 */ + , /* Aquila D10 */ + , /* Aquila D11 */ + ; /* Aquila D12 */ + }; + + /* Aquila PCIE_1 */ + pinctrl_pcie0: pcie0grp { + fsl,pins = ; /* Aquila C37 */ + }; + + /* Aquila PCIE_2 */ + pinctrl_pcie1: pcie1grp { + fsl,pins = ; /* Aquila C34 */ + }; + + /* Aquila QSPI_1_CS1# */ + pinctrl_qspi_cs1: qspics1grp { + fsl,pins = ; /* Aquila B66 */ + }; + + /* Aquila QSPI_1_CS2# as GPIO */ + pinctrl_qspi_cs2_gpio: qspics2gpiogrp { + fsl,pins = ; /* Aquila B62 */ + }; + + /* Aquila I2S_1 */ + pinctrl_sai2: sai2grp { + fsl,pins = , /* Aquila B21 */ + , /* Aquila B20 */ + , /* Aquila B23 */ + ; /* Aquila B22 */ + }; + + pinctrl_sai2_mclk: sai2mclkgrp { + fsl,pins = ; /* Aquila B24 */ + }; + + /* Aquila SD_1_CD# as GPIO */ + pinctrl_sd1_cd_gpio: sd1cdgpiogrp { + fsl,pins = ; /* Aquila A1 */ + }; + + /* Aquila SD_1_PWR_EN */ + pinctrl_sd1_pwr_en: sd1pwrengpiogrp { + fsl,pins = ; /* Aquila A6 */ + }; + + /* Aquila PWM_1 */ + pinctrl_pwm1: tpm3ch3grp { + fsl,pins = ; /* Aquila C25 */ + }; + + /* Aquila PWM_3_DSI as GPIO */ + pinctrl_pwm3_dsi_gpio: tpm5ch0gpiogrp { + fsl,pins = ; /* Aquila B46 */ + }; + + /* Aquila PWM_3_DSI */ + pinctrl_pwm3_dsi: tpm5ch0grp { + fsl,pins = ; /* Aquila B46 */ + }; + + /* Aquila PWM_4_DP */ + pinctrl_pwm4_dp: tpm5ch3grp { + fsl,pins = ; /* Aquila B58 */ + }; + + /* Aquila PWM_2 */ + pinctrl_pwm2: tpm6ch0grp { + fsl,pins = ; /* Aquila C26 */ + }; + + /* Aquila UART_3 */ + pinctrl_uart1: uart1grp { + fsl,pins = , /* Aquila D20 */ + ; /* Aquila D19 */ + }; + + /* Aquila UART_4 */ + pinctrl_uart2: uart2grp { + fsl,pins = , /* Aquila D22 */ + ; /* Aquila D21 */ + }; + + /* Aquila UART_1 */ + pinctrl_uart3: uart3grp { + fsl,pins = , /* Aquila B37 */ + , /* Aquila B35 */ + , /* Aquila B36 */ + ; /* Aquila B38 */ + }; + + /* Aquila UART_2 */ + pinctrl_uart7: uart7grp { + fsl,pins = , /* Aquila B33 */ + , /* Aquila B31 */ + , /* Aquila B32 */ + ; /* Aquila B34 */ + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = , /* eMMC_CLK */ + , /* eMMC_CMD */ + , /* eMMC_DATA0 */ + , /* eMMC_DATA1 */ + , /* eMMC_DATA2 */ + , /* eMMC_DATA3 */ + , /* eMMC_DATA4 */ + , /* eMMC_DATA5 */ + , /* eMMC_DATA6 */ + , /* eMMC_DATA7 */ + ; /* eMMC_STROBE */ + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = , /* eMMC_CLK */ + , /* eMMC_CMD */ + , /* eMMC_DATA0 */ + , /* eMMC_DATA1 */ + , /* eMMC_DATA2 */ + , /* eMMC_DATA3 */ + , /* eMMC_DATA4 */ + , /* eMMC_DATA5 */ + , /* eMMC_DATA6 */ + , /* eMMC_DATA7 */ + ; /* eMMC_STROBE */ + }; + + /* Aquila SD_1 */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = , /* Aquila A5 */ + , /* Aquila A7 */ + , /* Aquila A3 */ + , /* Aquila A2 */ + , /* Aquila A10 */ + ; /* Aquila A8 */ + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = , /* Aquila A5 */ + , /* Aquila A7 */ + , /* Aquila A3 */ + , /* Aquila A2 */ + , /* Aquila A10 */ + ; /* Aquila A8 */ + }; + + pinctrl_usdhc2_sleep: usdhc2-sleepgrp { + fsl,pins = , /* Aquila A5 */ + , /* Aquila A7 */ + , /* Aquila A3 */ + , /* Aquila A2 */ + , /* Aquila A10 */ + ; /* Aquila A8 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts index 5b05f25..7437e52 100644 --- a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts +++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts @@ -210,6 +210,11 @@ status = "okay"; }; +/* SMARC SER2 */ +&lpuart6 { + status = "okay"; +}; + /* SMARC MDIO, shared between all ethernet ports */ &netc_emdio { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi index 7a73958..7d76047 100644 --- a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi @@ -22,6 +22,7 @@ rtc1 = &scmi_bbm; serial0 = &lpuart2; serial1 = &lpuart1; + serial2 = &lpuart6; serial3 = &lpuart3; }; @@ -112,7 +113,7 @@ compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; - gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; enable-active-high; off-on-delay-us = <100000>; regulator-max-microvolt = <3300000>; @@ -450,6 +451,13 @@ "", "", "SMARC_SDIO_WP"; + + wifi-uart-en-hog { + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + line-name = "WIFI_UART_EN"; + output-high; + }; }; embedded-controller@28 { @@ -615,6 +623,26 @@ pinctrl-0 = <&pinctrl_uart3>; }; +/* On-module Bluetooth */ +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_uart>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + fw-init-baudrate = <3000000>; + }; +}; + +/* SMARC SER2 */ +&lpuart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + uart-has-rtscts; +}; + &mu7 { status = "okay"; }; @@ -822,6 +850,14 @@ }; &scmi_iomuxc { + /* On-module Bluetooth, UART pins shared with JTAG */ + pinctrl_bt_uart: btuartgrp { + fsl,pins = , /* WiFI_UART_RXD */ + , /* WiFI_UART_TXD */ + , /* WiFI_UART_RTS# */ + ; /* WiFI_UART_CTS# */ + }; + /* SMARC CAM_MCK */ pinctrl_cam_mck: cammckgrp { fsl,pins = ; /* SMARC S6 - CAM_MCK */ @@ -1105,6 +1141,14 @@ ; /* SMARC P141 - SER3_RX */ }; + /* SMARC SER2 */ + pinctrl_uart6: uart6grp { + fsl,pins = , /* SMARC P139 - SER2_CTS# */ + , /* SMARC P138 - SER2_RTS# */ + , /* SMARC P137 - SER2_RX */ + ; /* SMARC P136 - SER2_TX */ + }; + /* On-module eMMC */ pinctrl_usdhc1: usdhc1grp { fsl,pins = , /* SD1_CLK */ diff --git a/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts index 0f3d2e4..7a58ad3 100644 --- a/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts +++ b/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts @@ -168,6 +168,10 @@ status = "okay"; }; +&gpio1 { + status = "okay"; +}; + &lpi2c3 { clock-frequency = <400000>; pinctrl-names = "default", "gpio", "sleep"; @@ -274,13 +278,16 @@ st33ktpm2xi2c: tpm@2e { compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c"; reg = <0x2e>; + label = "tpm"; + reset-gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>; }; }; &lpspi7 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpspi7>; - cs-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>, + <&gpio1 7 GPIO_ACTIVE_LOW>; status = "okay"; /* Resistive touch controller */ @@ -306,6 +313,19 @@ ti,settle-delay-usec = /bits/ 16 <150>; ti,keep-vref-on; }; + + /* CAN controller */ + can0: can@1 { + compatible = "microchip,mcp251xfd"; + reg = <1>; + clocks = <&clk_osc_can0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + microchip,rx-int-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + spi-max-frequency = <12000000>; + }; }; /* Console */ @@ -442,6 +462,13 @@ >; }; + pinctrl_can: cangrp { + fsl,pins = < + IMX95_PAD_GPIO_IO35__GPIO5_IO_BIT15 0x31e + IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22 0x31e + >; + }; + pinctrl_captouch: captouchgrp { fsl,pins = < IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx95-verdin-ivy.dtsi b/arch/arm64/boot/dts/freescale/imx95-verdin-ivy.dtsi index 8337c8b..ff31f7c 100644 --- a/arch/arm64/boot/dts/freescale/imx95-verdin-ivy.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95-verdin-ivy.dtsi @@ -452,7 +452,6 @@ /* Verdin UART_2, through RS485 transceiver */ &lpuart8 { - rs485-rts-active-low; rs485-rx-during-tx; linux,rs485-enabled-at-boot-time; diff --git a/arch/arm64/boot/dts/freescale/imx95-verdin-nonwifi-zinnia.dts b/arch/arm64/boot/dts/freescale/imx95-verdin-nonwifi-zinnia.dts new file mode 100644 index 0000000..b9fa18f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-verdin-nonwifi-zinnia.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx95 + * https://www.toradex.com/products/carrier-board/zinnia-carrier-board + */ + +/dts-v1/; + +#include "imx95-verdin.dtsi" +#include "imx95-verdin-nonwifi.dtsi" +#include "imx95-verdin-zinnia.dtsi" + +/ { + model = "Toradex Verdin iMX95 on Zinnia Board"; + compatible = "toradex,verdin-imx95-nonwifi-zinnia", + "toradex,verdin-imx95-nonwifi", + "toradex,verdin-imx95", + "fsl,imx95"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-verdin-wifi-zinnia.dts b/arch/arm64/boot/dts/freescale/imx95-verdin-wifi-zinnia.dts new file mode 100644 index 0000000..7896147 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-verdin-wifi-zinnia.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx95 + * https://www.toradex.com/products/carrier-board/zinnia-carrier-board + */ + +/dts-v1/; + +#include "imx95-verdin.dtsi" +#include "imx95-verdin-wifi.dtsi" +#include "imx95-verdin-zinnia.dtsi" + +/ { + model = "Toradex Verdin iMX95 WB on Zinnia Board"; + compatible = "toradex,verdin-imx95-wifi-zinnia", + "toradex,verdin-imx95-wifi", + "toradex,verdin-imx95", + "fsl,imx95"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-verdin-zinnia.dtsi b/arch/arm64/boot/dts/freescale/imx95-verdin-zinnia.dtsi new file mode 100644 index 0000000..6409a6e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-verdin-zinnia.dtsi @@ -0,0 +1,429 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Common dtsi for Verdin iMX95 SoM on Zinnia carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx95 + * https://www.toradex.com/products/carrier-board/zinnia-carrier-board + */ + +#include +#include + +/ { + aliases { + eeprom1 = &carrier_eeprom; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_zinnia_leds>; + + /* LED1 Red - SODIMM 48 - LED1_R */ + led-1 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; + }; + + /* LED1 Blue - SODIMM 46 - LED1_B */ + led-2 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + }; + + /* LED3 Red - SODIMM 44 - LED3_R */ + led-3 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <3>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + }; + + /* LED3 Green - SODIMM 54 - LED3_G */ + led-4 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <3>; + gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; + }; + + /* LED3 Blue - SODIMM 36 - LED3_B */ + led-5 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <3>; + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + }; + + /* LED4 Red - SODIMM 34 - LED4_R */ + led-6 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <4>; + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + }; + + /* LED4 Green - SODIMM 32 - LED4_G */ + led-7 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <4>; + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + }; + + /* LED4 Blue - SODIMM 30 - LED4_B */ + led-8 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + function-enumerator = <4>; + gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; + }; + }; + + /* Zinnia Power Supply Input Voltage */ + zinnia-1v8-voltage { + compatible = "voltage-divider"; + full-ohms = <39000>; /* 12k + 27k */ + /* Verdin ADC_4 */ + io-channels = <&adc1 3>; + output-ohms = <27000>; + }; + + zinnia-3v3-voltage { + compatible = "voltage-divider"; + full-ohms = <54000>; /* 27k + 27k */ + /* Verdin ADC_3 */ + io-channels = <&adc1 2>; + output-ohms = <27000>; + }; + + zinnia-5v-voltage { + compatible = "voltage-divider"; + full-ohms = <39000>; /* 27k + 12k */ + /* Verdin ADC_2 */ + io-channels = <&adc1 1>; + output-ohms = <12000>; + }; + + zinnia-input-voltage { + compatible = "voltage-divider"; + full-ohms = <204700>; /* 200k + 4.7k */ + /* Verdin ADC_1 */ + io-channels = <&adc1 0>; + output-ohms = <4700>; + }; +}; + +/* Verdin ADC_1, ADC_2, ADC_3 and ADC_4 */ +&adc1 { + status = "okay"; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&enetc_port0 { + status = "okay"; +}; + +/* Verdin ETH_2_RGMII */ +&enetc_port1 { + phy-handle = <ðphy2>; + phy-mode = "rgmii-id"; + + status = "okay"; +}; + +/* Verdin CAN_1 */ +&flexcan1 { + status = "okay"; +}; + +&gpio1 { + gpio-line-names = + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + ""; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, <&pinctrl_gpio3>; + gpio-line-names = + "DO1_EN", /* SODIMM 206 */ /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "DI1_EN", /* SODIMM 208 */ + "", + "", /* 20 */ + "", + "", + "", + "DI1_RB", /* SODIMM 210 */ + "", + "", + "", + "", + "", + "", /* 30 */ + ""; +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio6>; + gpio-line-names = + "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "DI2_EN", /* SODIMM 218 */ + "", + "", + "", /* 30 */ + ""; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio5>; + gpio-line-names = + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "DI2_RB", /* SODIMM 216 */ + ""; +}; + +&gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio4>, <&pinctrl_qspi1_io0_gpio>; + gpio-line-names = + "DI3_RB", /* SODIMM 56 */ /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "DO2_EN", /* SODIMM 212 */ + "", + "", + "", + "", + ""; +}; + +/* Verdin I2C_1 */ +&lpi2c4 { + status = "okay"; + + temperature-sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + carrier_eeprom: eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Verdin SPI_1 */ +&lpspi6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi6>, + <&pinctrl_spi1_cs>, + <&pinctrl_uart8_cts_gpio>; + cs-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>, + <&som_gpio_expander 13 GPIO_ACTIVE_LOW>, + <&gpio4 29 GPIO_ACTIVE_LOW>; + + tpm@2 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <2>; + spi-max-frequency = <18500000>; + }; +}; + +/* Verdin UART_3, used as the Linux console */ +&lpuart1 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&lpuart7 { + status = "okay"; +}; + +/* Verdin UART_2, through RS485 transceiver */ +&lpuart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>, <&pinctrl_uart8_rts>; + rs485-rx-during-tx; + linux,rs485-enabled-at-boot-time; + + status = "okay"; +}; + +&netc_emdio { + ethphy2: ethernet-phy@2 { + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth2_rgmii_int>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + }; +}; + +&som_gpio_expander { + gpio-line-names = + "DO3_EN", /* SODIMM 220 */ + "DI3_EN", /* SODIMM 222 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + ""; +}; + +/* Verdin USB_1 */ +&usb2 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usb3 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; + +&scmi_iomuxc { + pinctrl_uart8_cts_gpio: uart8ctsgrp { + fsl,pins = ; /* SODIMM 143 */ + }; + + pinctrl_zinnia_leds: zinnialedsgrp { + fsl,pins = , /* SODIMM 30 */ + , /* SODIMM 32 */ + , /* SODIMM 34 */ + , /* SODIMM 36 */ + , /* SODIMM 44 */ + , /* SODIMM 46 */ + , /* SODIMM 48 */ + ; /* SODIMM 54 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx95-verdin.dtsi index d373795..72e7f1e 100644 --- a/arch/arm64/boot/dts/freescale/imx95-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95-verdin.dtsi @@ -541,7 +541,7 @@ /* Verdin UART_2 */ &lpuart8 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart8>; + pinctrl-0 = <&pinctrl_uart8>, <&pinctrl_uart8_cts>, <&pinctrl_uart8_rts>; uart-has-rtscts; }; @@ -1058,12 +1058,20 @@ ; /* SODIMM 133 */ }; - /* Verdin UART_2 */ + /* Verdin UART_2 CTS */ + pinctrl_uart8_cts: uart8ctsgrp { + fsl,pins = ; /* SODIMM 143 */ + }; + + /* Verdin UART_2 RTS */ + pinctrl_uart8_rts: uart8rtsgrp { + fsl,pins = ; /* SODIMM 141 */ + }; + + /* Verdin UART_2 RX/TX */ pinctrl_uart8: uart8grp { fsl,pins = , /* SODIMM 139 */ - , /* SODIMM 137 */ - , /* SODIMM 143 */ - ; /* SODIMM 141 */ + ; /* SODIMM 137 */ }; /* On-module eMMC */ diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi index 7139487..d6c549c 100644 --- a/arch/arm64/boot/dts/freescale/imx95.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -795,6 +795,17 @@ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; timeout-sec = <40>; status = "disabled"; + bootph-all; + }; + + wdog4: watchdog@424a0000 { + compatible = "fsl,imx93-wdt"; + reg = <0x424a0000 0x10000>; + interrupts = ; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; + timeout-sec = <40>; + status = "disabled"; + bootph-all; }; tpm3: pwm@424e0000 { @@ -1761,7 +1772,7 @@ smmu: iommu@490d0000 { compatible = "arm,smmu-v3"; - reg = <0x490d0000 0x100000>; + reg = <0x490d0000 0x40000>; interrupts = , , , @@ -1770,6 +1781,90 @@ #iommu-cells = <1>; status = "disabled"; }; + + pmu@490d2000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x490d2000 0x1000>, + <0x490f2000 0x1000>; + interrupts = ; + }; + + pmu@49112000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x49112000 0x1000>, + <0x49122000 0x1000>; + interrupts = ; + }; + + pmu@49132000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x49132000 0x1000>, + <0x49142000 0x1000>; + interrupts = ; + }; + + pmu@49152000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x49152000 0x1000>, + <0x49162000 0x1000>; + interrupts = ; + }; + + pmu@49172000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x49172000 0x1000>, + <0x49182000 0x1000>; + interrupts = ; + }; + + pmu@49192000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x49192000 0x1000>, + <0x491a2000 0x1000>; + interrupts = ; + }; + + pmu@491b2000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x491b2000 0x1000>, + <0x491c2000 0x1000>; + interrupts = ; + }; + + pmu@491d2000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x491d2000 0x1000>, + <0x491e2000 0x1000>; + interrupts = ; + }; + + pmu@491f2000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x491f2000 0x1000>, + <0x49202000 0x1000>; + interrupts = ; + }; + + pmu@49212000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x49212000 0x1000>, + <0x49222000 0x1000>; + interrupts = ; + }; + + pmu@49232000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x49232000 0x1000>, + <0x49242000 0x1000>; + interrupts = ; + }; + + pmu@49252000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x49252000 0x1000>, + <0x49262000 0x1000>; + interrupts = ; + }; }; usb3: usb@4c010010 { @@ -1852,8 +1947,9 @@ <0 0x4c360000 0 0x10000>, <0 0x4c340000 0 0x4000>; reg-names = "dbi", "config", "atu", "app"; - ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>, - <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>; + ranges = <0x43000000 0x9 0x00000000 0x9 0x00000000 0x0 0xe0000000>, + <0x82000000 0x0 0xe0000000 0x9 0xe0000000 0x0 0x10000000>, + <0x81000000 0x0 0x00000000 0x9 0xf0000000 0x0 0x00100000>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -1890,6 +1986,17 @@ iommu-map-mask = <0x1ff>; fsl,max-link-speed = <3>; status = "disabled"; + + pcie0_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_ep: pcie-ep@4c300000 { @@ -1927,8 +2034,9 @@ <0 0x4c3e0000 0 0x10000>, <0 0x4c3c0000 0 0x4000>; reg-names = "dbi", "config", "atu", "app"; - ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>, - <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>; + ranges = <0x43000000 0xa 0x00000000 0xa 0x00000000 0x0 0xe0000000>, + <0x82000000 0x0 0xe0000000 0xa 0xe0000000 0x0 0x10000000>, + <0x81000000 0x0 0x00000000 0xa 0xf0000000 0x0 0x00100000>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -1967,6 +2075,17 @@ iommu-map-mask = <0x1ff>; fsl,max-link-speed = <3>; status = "disabled"; + + pcie1_port0: pcie@0 { + compatible = "pciclass,0604"; + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_ep: pcie-ep@4c380000 { diff --git a/arch/arm64/boot/dts/freescale/imx952.dtsi b/arch/arm64/boot/dts/freescale/imx952.dtsi index b307078..020de00 100644 --- a/arch/arm64/boot/dts/freescale/imx952.dtsi +++ b/arch/arm64/boot/dts/freescale/imx952.dtsi @@ -318,6 +318,28 @@ clock-names = "main_clk"; }; + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-hz-real = /bits/ 64 <500000000>; + opp-microvolt = <920000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-hz-real = /bits/ 64 <800000000>; + opp-microvolt = <920000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-hz-real = /bits/ 64 <1000000000>; + opp-microvolt = <920000>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -349,6 +371,17 @@ clocks = <&scmi_clk IMX952_CLK_BUSWAKEUP>; timeout-sec = <40>; status = "disabled"; + bootph-all; + }; + + wdog4: watchdog@420c0000 { + compatible = "fsl,imx93-wdt"; + reg = <0x420c0000 0x10000>; + interrupts = ; + clocks = <&scmi_clk IMX952_CLK_BUSWAKEUP>; + timeout-sec = <40>; + status = "disabled"; + bootph-all; }; tpm3: pwm@42100000 { @@ -1484,5 +1517,19 @@ power-domains = <&scmi_devpd IMX952_PD_NETC>; status = "disabled"; }; + + gpu: gpu@4d900000 { + compatible = "nxp,imx95-mali", "arm,mali-valhall-csf"; + reg = <0 0x4d900000 0 0x480000>; + interrupts = , + , + ; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&scmi_clk IMX952_CLK_GPU>; + clock-names = "core"; + power-domains = <&scmi_devpd IMX952_PD_GPU>; + operating-points-v2 = <&gpu_opp_table>; + dynamic-power-coefficient = <1013>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi index 51d00da..809019e 100644 --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -3,7 +3,7 @@ * NXP S32G2 SoC family * * Copyright (c) 2021 SUSE LLC - * Copyright 2017-2021, 2024-2025 NXP + * Copyright 2017-2021, 2024-2026 NXP */ #include @@ -417,6 +417,15 @@ clock-names = "dmamux0", "dmamux1"; }; + pit0: timer@40188000 { + compatible = "nxp,s32g2-pit"; + reg = <0x40188000 0x3000>; + interrupts = ; + clocks = <&clks 61>; + clock-names = "pit"; + status = "disabled"; + }; + can0: can@401b4000 { compatible = "nxp,s32g2-flexcan"; reg = <0x401b4000 0xa000>; @@ -554,6 +563,29 @@ status = "disabled"; }; + pwm0: pwm@401f4000 { + compatible = "nxp,s32g2-ftm-pwm"; + reg = <0x401f4000 0x1000>; + #pwm-cells = <3>; + clocks = <&clks 5>, + <&clks 6>, + <&clks 5>, + <&clks 5>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + status = "disabled"; + }; + + adc0: adc@401f8000 { + compatible = "nxp,s32g2-sar-adc"; + reg = <0x401f8000 0x1000>; + interrupts = ; + clocks = <&clks 0x41>; + dmas = <&edma0 0 32>; + dma-names = "rx"; + status = "disabled"; + }; + swt4: watchdog@40200000 { compatible = "nxp,s32g2-swt"; reg = <0x40200000 0x1000>; @@ -622,6 +654,15 @@ clock-names = "dmamux0", "dmamux1"; }; + pit1: timer@40288000 { + compatible = "nxp,s32g2-pit"; + reg = <0x40288000 0x3000>; + interrupts = ; + clocks = <&clks 61>; + clock-names = "pit"; + status = "disabled"; + }; + can2: can@402a8000 { compatible = "nxp,s32g2-flexcan"; reg = <0x402a8000 0xa000>; @@ -717,6 +758,29 @@ status = "disabled"; }; + pwm1: pwm@402e4000 { + compatible = "nxp,s32g2-ftm-pwm"; + reg = <0x402e4000 0x1000>; + #pwm-cells = <3>; + clocks = <&clks 7>, + <&clks 8>, + <&clks 7>, + <&clks 7>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + status = "disabled"; + }; + + adc1: adc@402e8000 { + compatible = "nxp,s32g2-sar-adc"; + reg = <0x402e8000 0x1000>; + interrupts = ; + clocks = <&clks 0x41>; + dmas = <&edma1 1 32>; + dma-names = "rx"; + status = "disabled"; + }; + usdhc0: mmc@402f0000 { compatible = "nxp,s32g2-usdhc"; reg = <0x402f0000 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi index e314f3c..22e80fc 100644 --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright 2021-2025 NXP + * Copyright 2021-2026 NXP * * Authors: Ghennadi Procopciuc * Ciprian Costea @@ -475,6 +475,15 @@ clock-names = "dmamux0", "dmamux1"; }; + pit0: pit@40188000 { + compatible = "nxp,s32g3-pit", "nxp,s32g2-pit"; + reg = <0x40188000 0x3000>; + interrupts = ; + clocks = <&clks 61>; + clock-names = "pit"; + status = "disabled"; + }; + can0: can@401b4000 { compatible = "nxp,s32g3-flexcan", "nxp,s32g2-flexcan"; @@ -617,6 +626,30 @@ status = "disabled"; }; + pwm0: pwm@401f4000 { + compatible = "nxp,s32g3-ftm-pwm", + "nxp,s32g2-ftm-pwm"; + reg = <0x401f4000 0x1000>; + #pwm-cells = <3>; + clocks = <&clks 5>, + <&clks 6>, + <&clks 5>, + <&clks 5>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + status = "disabled"; + }; + + adc0: adc@401f8000 { + compatible = "nxp,s32g3-sar-adc", "nxp,s32g2-sar-adc"; + reg = <0x401f8000 0x1000>; + interrupts = ; + clocks = <&clks 0x41>; + dmas = <&edma0 0 32>; + dma-names = "rx"; + status = "disabled"; + }; + swt4: watchdog@40200000 { compatible = "nxp,s32g3-swt", "nxp,s32g2-swt"; reg = <0x40200000 0x1000>; @@ -693,6 +726,15 @@ clock-names = "dmamux0", "dmamux1"; }; + pit1: pit@40288000 { + compatible = "nxp,s32g3-pit", "nxp,s32g2-pit"; + reg = <0x40288000 0x3000>; + interrupts = ; + clocks = <&clks 61>; + clock-names = "pit"; + status = "disabled"; + }; + can2: can@402a8000 { compatible = "nxp,s32g3-flexcan", "nxp,s32g2-flexcan"; @@ -792,6 +834,30 @@ status = "disabled"; }; + pwm1: pwm@402e4000 { + compatible = "nxp,s32g3-ftm-pwm", + "nxp,s32g2-ftm-pwm"; + reg = <0x402e4000 0x1000>; + #pwm-cells = <3>; + clocks = <&clks 7>, + <&clks 8>, + <&clks 7>, + <&clks 7>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + status = "disabled"; + }; + + adc1: adc@402e8000 { + compatible = "nxp,s32g3-sar-adc", "nxp,s32g2-sar-adc"; + reg = <0x402e8000 0x1000>; + interrupts = ; + clocks = <&clks 0x41>; + dmas = <&edma1 1 32>; + dma-names = "rx"; + status = "disabled"; + }; + usdhc0: mmc@402f0000 { compatible = "nxp,s32g3-usdhc", "nxp,s32g2-usdhc"; @@ -862,7 +928,7 @@ swt8: watchdog@40500000 { compatible = "nxp,s32g3-swt", "nxp,s32g2-swt"; - reg = <40500000 0x1000>; + reg = <0x40500000 0x1000>; clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>; clock-names = "counter", "module", "register"; status = "disabled"; diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi index 803ff45..be7b645 100644 --- a/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi +++ b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright 2024 NXP + * Copyright 2024, 2026 NXP * * Authors: Ciprian Marian Costea * Ghennadi Procopciuc @@ -245,6 +245,70 @@ bias-pull-up; }; }; + + ftm0_pins: ftm0-pins { + ftm0-grp0 { + pinmux = <0x2912>; + }; + + ftm0-grp1 { + pinmux = <0x122>, + <0xb42>; + output-enable; + input-enable; + }; + + ftm0-grp2 { + pinmux = <0xb13>, + <0xb53>; + output-enable; + input-enable; + }; + + ftm0-grp3 { + pinmux = <0x2904>; + }; + + ftm0-grp4 { + pinmux = <0x2925>; + }; + + ftm0-grp5 { + pinmux = <0x2936>; + }; + }; + + ftm1_pins: ftm1-pins { + ftm1-grp0 { + pinmux = <0x1d3>; + output-enable; + input-enable; + }; + + ftm1-grp1 { + pinmux = <0x29b4>; + }; + + ftm1-grp2 { + pinmux = <0x29c3>; + }; + + ftm1-grp3 { + pinmux = <0x1f4>; + output-enable; + input-enable; + }; + + ftm1-grp4 { + pinmux = <0x202>; + output-enable; + input-enable; + }; + + ftm1-grp5 { + pinmux = <0x29d2>; + }; + }; }; &can0 { @@ -293,6 +357,18 @@ status = "okay"; }; +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&ftm0_pins>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&ftm1_pins>; + status = "okay"; +}; + &spi1 { pinctrl-0 = <&dspi1_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index c6056a8..27fb08d 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -550,6 +550,12 @@ ports { #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + usb_con_hs: endpoint { + remote-endpoint = <&dwc3_role_switch>; + }; + }; port@1 { reg = <1>; usb_con_ss: endpoint { @@ -558,15 +564,6 @@ }; }; }; - port { - #address-cells = <1>; - #size-cells = <0>; - - rt1711h_ep: endpoint@0 { - reg = <0>; - remote-endpoint = <&dwc3_role_switch>; - }; - }; }; adv7533: adv7533@39 { @@ -683,7 +680,7 @@ #size-cells = <0>; dwc3_role_switch: endpoint@0 { reg = <0>; - remote-endpoint = <&rt1711h_ep>; + remote-endpoint = <&usb_con_hs>; }; dwc3_ss: endpoint@1 { diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile index 33fcc55..088a03b 100644 --- a/arch/arm64/boot/dts/intel/Makefile +++ b/arch/arm64/boot/dts/intel/Makefile @@ -8,5 +8,6 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \ socfpga_agilex5_socdk_013b.dtb \ socfpga_agilex5_socdk_modular.dtb \ socfpga_agilex5_socdk_nand.dtb \ + socfpga_agilex7m_socdk.dtb \ socfpga_n5x_socdk.dtb dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts index 14b299f..25e17df 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts @@ -12,6 +12,8 @@ aliases { serial0 = &uart0; ethernet2 = &gmac2; + i3c0 = &i3c0; + i3c1 = &i3c1; }; chosen { diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi index 02e62d9..b06c6d5 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi @@ -343,7 +343,7 @@ #dma-cells = <1>; dma-channels = <4>; snps,dma-masters = <1>; - snps,data-width = <2>; + snps,data-width = <3>; snps,block-size = <32767 32767 32767 32767>; snps,priority = <0 1 2 3>; snps,axi-max-burst-len = <8>; @@ -362,7 +362,7 @@ #dma-cells = <1>; dma-channels = <4>; snps,dma-masters = <1>; - snps,data-width = <2>; + snps,data-width = <3>; snps,block-size = <32767 32767 32767 32767>; snps,priority = <0 1 2 3>; snps,axi-max-burst-len = <8>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts index 262bb3e..57d3c58 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts @@ -13,6 +13,8 @@ ethernet0 = &gmac0; ethernet1 = &gmac1; ethernet2 = &gmac2; + i3c0 = &i3c0; + i3c1 = &i3c1; }; chosen { @@ -42,7 +44,7 @@ &gmac2 { status = "okay"; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; /* TX/RX clock delays provided by Agilex5 I/O hardware */ phy-handle = <&emac2_phy0>; max-frame-size = <9000>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts index f71e128..82cd411 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts @@ -11,6 +11,8 @@ aliases { serial0 = &uart0; ethernet2 = &gmac2; + i3c0 = &i3c0; + i3c1 = &i3c1; }; chosen { @@ -41,7 +43,7 @@ &gmac2 { status = "okay"; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; /* TX/RX clock delays provided by Agilex5 I/O hardware */ phy-handle = <&emac2_phy0>; max-frame-size = <9000>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_modular.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_modular.dts index 1831402..4d32b69 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_modular.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_modular.dts @@ -11,6 +11,8 @@ aliases { serial0 = &uart0; ethernet2 = &gmac2; + i3c0 = &i3c0; + i3c1 = &i3c1; }; chosen { @@ -44,7 +46,7 @@ &gmac2 { status = "okay"; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; /* TX/RX clock delays provided by Agilex5 I/O hardware */ phy-handle = <&emac2_phy0>; max-frame-size = <9000>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts index ec4541d..8144309 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts @@ -11,6 +11,8 @@ aliases { serial0 = &uart0; ethernet0 = &gmac0; + i3c0 = &i3c0; + i3c1 = &i3c1; }; chosen { @@ -39,7 +41,7 @@ &gmac0 { status = "okay"; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; /* TX/RX clock delays provided by Agilex5 I/O hardware */ phy-handle = <&emac0_phy0>; max-frame-size = <9000>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts new file mode 100644 index 0000000..c1f270b --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2026 Altera Corporation + +#include "socfpga_agilex.dtsi" + +/ { + model = "Altera SoCFPGA Agilex7-M SoCDK"; + compatible = "altr,socfpga-agilex7m-socdk", + "altr,socfpga-agilex7m"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + label = "hps_led0"; + gpios = <&portb 20 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + label = "hps_led1"; + gpios = <&portb 19 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "hps_led2"; + gpios = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0x80000000 0 0>; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gmac0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@4 { + reg = <4>; + + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <900>; /* 0ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + }; + }; +}; + +&mmc { + status = "okay"; + cap-sd-highspeed; + broken-cd; + bus-width = <4>; + clk-phase-sd-hs = <0>, <135>; +}; + +&osc1 { + clock-frequency = <25000000>; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts index b2ce5ed..6ec899c 100644 --- a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts +++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts @@ -23,7 +23,7 @@ fb0: framebuffer@17177000 { compatible = "simple-framebuffer"; - reg = <0 0x17177000 0 (480 * 800 * 4)>; + memory-region = <&fb_mem>; power-domains = <&apmu PXA1908_POWER_DOMAIN_DSI>; width = <480>; height = <800>; @@ -48,8 +48,9 @@ reg = <0 0 0 0x1000000>; }; - framebuffer@17000000 { - reg = <0 0x17000000 0 0x1800000>; + /* The "active buffer" is at 0x17000000 + (size of one buffer). */ + fb_mem: framebuffer@17177000 { + reg = <0 0x17177000 0 (480 * 800 * 4)>; no-map; }; }; @@ -460,7 +461,7 @@ regulators { ldo2: ldo2 { - regulator-min-microvolt = <1900000>; + regulator-min-microvolt = <2500000>; regulator-max-microvolt = <3100000>; }; @@ -523,6 +524,8 @@ pinctrl-1 = <&sdh1_fast_pins_0 &sdh1_fast_pins_1 &sdh1_pins_2>; bus-width = <4>; non-removable; + keep-power-in-suspend; + wakeup-source; }; &pwm3 { diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi index 5778bfd..91022b6 100644 --- a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi +++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi @@ -55,8 +55,11 @@ }; psci { - compatible = "arm,psci-0.2"; + compatible = "arm,psci-0.2", "arm,psci"; method = "smc"; + + cpu_off = <0x85000001>; + cpu_on = <0x85000002>; }; reserved-memory { diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 387faa9..a86fb31 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -47,6 +47,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-2g5.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-emmc.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-4e.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-cn13.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-cn14.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-cn15.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-cn18.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-emmc.dtbo @@ -70,18 +72,24 @@ mt7988a-bananapi-bpi-r4-2g5-sd-dtbs := \ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-2g5-sd.dtb mt7988a-bananapi-bpi-r4-pro-8x-emmc-dtbs := \ mt7988a-bananapi-bpi-r4-pro-8x.dtb \ + mt7988a-bananapi-bpi-r4-pro-cn13.dtbo \ + mt7988a-bananapi-bpi-r4-pro-cn14.dtbo \ mt7988a-bananapi-bpi-r4-pro-emmc.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x-emmc.dtb mt7988a-bananapi-bpi-r4-pro-8x-sd-dtbs := \ mt7988a-bananapi-bpi-r4-pro-8x.dtb \ + mt7988a-bananapi-bpi-r4-pro-cn13.dtbo \ + mt7988a-bananapi-bpi-r4-pro-cn14.dtbo \ mt7988a-bananapi-bpi-r4-pro-sd.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x-sd.dtb mt7988a-bananapi-bpi-r4-pro-8x-sd-cn15-dtbs := \ mt7988a-bananapi-bpi-r4-pro-8x-sd.dtb \ + mt7988a-bananapi-bpi-r4-pro-cn14.dtbo \ mt7988a-bananapi-bpi-r4-pro-cn15.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x-sd-cn15.dtb mt7988a-bananapi-bpi-r4-pro-8x-sd-cn18-dtbs := \ mt7988a-bananapi-bpi-r4-pro-8x-sd.dtb \ + mt7988a-bananapi-bpi-r4-pro-cn13.dtbo \ mt7988a-bananapi-bpi-r4-pro-cn18.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x-sd-cn18.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi index 45ad69e..a953fb5 100644 --- a/arch/arm64/boot/dts/mediatek/mt6359.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi @@ -164,15 +164,8 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1300000>; }; - mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt { - regulator-name = "vcn33_1_bt"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3500000>; - }; - mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi { - regulator-name = "vcn33_1_wifi"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3500000>; + mt6359_vcn33_1_ldo_reg: ldo_vcn33_1 { + regulator-name = "vcn33_1"; }; mt6359_vaux18_ldo_reg: ldo_vaux18 { regulator-name = "vaux18"; @@ -231,15 +224,8 @@ regulator-min-microvolt = <2500000>; regulator-max-microvolt = <3300000>; }; - mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt { - regulator-name = "vcn33_2_bt"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3500000>; - }; - mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi { - regulator-name = "vcn33_2_wifi"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3500000>; + mt6359_vcn33_2_ldo_reg: ldo_vcn33_2 { + regulator-name = "vcn33_2"; }; mt6359_va12_ldo_reg: ldo_va12 { regulator-name = "va12"; diff --git a/arch/arm64/boot/dts/mediatek/mt6365.dtsi b/arch/arm64/boot/dts/mediatek/mt6365.dtsi new file mode 100644 index 0000000..8d16f53 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6365.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2026 MediaTek Inc. + */ + +#include "mt6359.dtsi" + +&pmic { + compatible = "mediatek,mt6365", "mediatek,mt6359"; + + mt6365regulators: regulators { + compatible = "mediatek,mt6365-regulator", "mediatek,mt6359-regulator"; + }; +}; + +&pmic_adc { + compatible = "mediatek,mt6365-auxadc", "mediatek,mt6359-auxadc"; +}; + +mt6365codec: &mt6359codec { + compatible = "mediatek,mt6365-codec", "mediatek,mt6359-codec"; +}; + +mt6365rtc: &mt6359rtc { + compatible = "mediatek,mt6365-rtc", "mediatek,mt6358-rtc"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts b/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts index a314c3e..db399cb 100644 --- a/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts +++ b/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts @@ -1,6 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only OR MIT /dts-v1/; +#include +#include +#include #include "mt7981b.dtsi" @@ -12,4 +15,37 @@ reg = <0 0x40000000 0 0x10000000>; device_type = "memory"; }; + + keys { + compatible = "gpio-keys"; + + key-mesh { + label = "MESH"; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + key-reset { + label = "RESET"; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi index 1bbe219..e63ba3a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi @@ -150,6 +150,21 @@ #clock-cells = <1>; }; + crypto@10320000 { + compatible = "mediatek,mt7981-crypto", + "inside-secure,safexcel-eip97ies"; + reg = <0 0x10320000 0 0x40000>; + interrupts = , + , + , + ; + interrupt-names = "ring0", "ring1", "ring2", "ring3"; + clocks = <&topckgen CLK_TOP_EIP97B>; + clock-names = "core"; + assigned-clocks = <&topckgen CLK_TOP_EIP97B_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_CB_NET1_D5>; + }; + uart0: serial@11002000 { compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x100>; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn13.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn13.dtso new file mode 100644 index 0000000..973b76b --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn13.dtso @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Frank Wunderlich + */ + +/* This enables key-m slot CN13 on pcie2(11280000 1L0) on BPI-R4-Pro */ + +/dts-v1/; +/plugin/; + +#include + +/ { + compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a"; +}; + +&{/soc/pinctrl@1001f000/pcie-2-hog} { + output-high; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn14.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn14.dtso new file mode 100644 index 0000000..90b2a64 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn14.dtso @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Frank Wunderlich + */ + +/* This enables key-m slot CN14 on pcie3(11290000 1L1) on BPI-R4-Pro */ + +/dts-v1/; +/plugin/; + +#include + +/ { + compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a"; +}; + +&{/soc/pinctrl@1001f000/pcie-3-hog} { + output-high; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi index a48132f..1eeb721 100644 --- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi @@ -61,14 +61,14 @@ led_red: sys-led-red { color = ; + function = LED_FUNCTION_FAULT; gpios = <&pca9555 15 GPIO_ACTIVE_HIGH>; - default-state = "on"; }; led_blue: sys-led-blue { color = ; + function = LED_FUNCTION_ACTIVITY; gpios = <&pca9555 14 GPIO_ACTIVE_HIGH>; - default-state = "on"; }; }; @@ -185,13 +185,6 @@ status = "okay"; }; -&fan { - pinctrl-0 = <&pwm0_pins>; - pinctrl-names = "default"; - pwms = <&pwm 0 50000>; - status = "okay"; -}; - &gmac0 { status = "okay"; }; @@ -207,7 +200,7 @@ }; &gsw_port0 { - label = "mgmt"; + label = "lan5"; }; /* R4Pro has only port 0 connected, so disable the others */ @@ -437,14 +430,12 @@ pcie-2-hog { gpio-hog; gpios = <79 GPIO_ACTIVE_HIGH>; - output-high; }; /* 1L1 0=key-b (CN18), 1=key-m (CN14) */ pcie-3-hog { gpio-hog; gpios = <63 GPIO_ACTIVE_HIGH>; - output-high; }; pwm0_pins: pwm0-pins { diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi index b495a24..0250b4e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi @@ -73,6 +73,10 @@ pmic@6 { compatible = "mediatek,mt6319-regulator", "mediatek,mt6315-regulator"; reg = <0x6 SPMI_USID>; + pvdd1-supply = <&pp4200_z2>; + pvdd2-supply = <&pp4200_z2>; + pvdd3-supply = <&pp4200_z2>; + pvdd4-supply = <&pp4200_z2>; regulators { mt6319_buck1: vbuck1 { diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi index 8e42350..4cb2359 100644 --- a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi @@ -217,6 +217,30 @@ domain-supply = <&mt6359_vproc1_buck_reg>; }; +&cpu0 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu1 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu2 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu3 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu4 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu5 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + /* * Geralt is the reference design and doesn't have target TDP. * Ciri is (currently) the only device following Geralt, and its @@ -1149,6 +1173,23 @@ &pmic { interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; + vsys-smps-supply = <&pp4200_s5>; + vsys-vcore-supply = <&pp4200_s5>; + vsys-vgpu11-supply = <&pp4200_s5>; + vsys-vgpu12-supply = <&pp4200_s5>; + vsys-vpa-supply = <&pp4200_s5>; + vsys-vproc1-supply = <&pp4200_s5>; + vsys-vproc2-supply = <&pp4200_s5>; + vsys-vpu-supply = <&pp4200_s5>; + vsys-vs1-supply = <&pp4200_s5>; + vsys-vs2-supply = <&pp4200_s5>; + vsys-vmodem-supply = <&pp4200_s5>; + vsys-ldo1-supply = <&pp4200_s5>; + vsys-ldo2-supply = <&pp4200_s5>; + vs1-ldo1-supply = <&mt6359_vs1_buck_reg>; + vs1-ldo2-supply = <&mt6359_vs1_buck_reg>; + vs2-ldo1-supply = <&mt6359_vs2_buck_reg>; + vs2-ldo2-supply = <&mt6359_vs2_buck_reg>; }; &postmask0_in { diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index eadf1b2..40d34b1 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -167,12 +167,22 @@ regulator-name = "pp3300_wlan"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pp3300_wlan_pins>; enable-active-high; gpio = <&pio 143 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300_g>; + }; + + /* system wide switching 4.2V power rail */ + pp4200_g: regulator-4v2-g { + compatible = "regulator-fixed"; + regulator-name = "pp4200_g"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + vin-supply = <&ppvar_sys>; }; /* system wide switching 5.0V power rail */ @@ -287,6 +297,38 @@ memory-region = <&afe_dma_mem>; }; +&cpu0 { + cpu-supply = <&mt6315_6_vbuck3>; +}; + +&cpu1 { + cpu-supply = <&mt6315_6_vbuck3>; +}; + +&cpu2 { + cpu-supply = <&mt6315_6_vbuck3>; +}; + +&cpu3 { + cpu-supply = <&mt6315_6_vbuck3>; +}; + +&cpu4 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu5 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu6 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu7 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + &dsi0 { status = "okay"; }; @@ -514,17 +556,19 @@ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6_D8>; flash@0 { - compatible = "winbond,w25q64jwm", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <52000000>; spi-rx-bus-width = <2>; spi-tx-bus-width = <2>; + vcc-supply = <&mt6359_vio18_ldo_reg>; }; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pcie_pins>; + memory-region = <&wifi_restricted_dma_region>; pcie0: pcie@0,0 { device_type = "pci"; @@ -539,7 +583,6 @@ wifi: wifi@0,0 { reg = <0x10000 0 0 0 0x100000>, <0x10000 0 0x100000 0 0x100000>; - memory-region = <&wifi_restricted_dma_region>; }; }; }; @@ -609,9 +652,9 @@ "SD_DATA1", "", "", + "BT_KILL_1V8_L", "", - "", - "", + "WIFI_KILL_1V8_L", "", "PCIE_WAKE_ODL", "PCIE_RST_L", @@ -1306,6 +1349,23 @@ &pmic { interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>; + vsys-smps-supply = <&pp4200_g>; + vsys-vcore-supply = <&pp4200_g>; + vsys-vgpu11-supply = <&pp4200_g>; + vsys-vgpu12-supply = <&pp4200_g>; + vsys-vpa-supply = <&pp4200_g>; + vsys-vproc1-supply = <&pp4200_g>; + vsys-vproc2-supply = <&pp4200_g>; + vsys-vpu-supply = <&pp4200_g>; + vsys-vs1-supply = <&pp4200_g>; + vsys-vs2-supply = <&pp4200_g>; + vsys-vmodem-supply = <&pp4200_g>; + vsys-ldo1-supply = <&pp4200_g>; + vsys-ldo2-supply = <&pp4200_g>; + vs1-ldo1-supply = <&mt6359_vs1_buck_reg>; + vs1-ldo2-supply = <&mt6359_vs1_buck_reg>; + vs2-ldo1-supply = <&mt6359_vs2_buck_reg>; + vs2-ldo2-supply = <&mt6359_vs2_buck_reg>; }; &pwm0 { @@ -1367,6 +1427,7 @@ reg = <0>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + vin-supply = <&pp4200_g>; }; mt6360_ldo5_reg: regulator@1 { @@ -1374,6 +1435,7 @@ reg = <1>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&pp4200_g>; }; typec { @@ -1427,6 +1489,10 @@ mt6315_6: pmic@6 { compatible = "mediatek,mt6315-regulator"; reg = <0x6 SPMI_USID>; + pvdd1-supply = <&pp4200_g>; + pvdd2-supply = <&pp4200_g>; + pvdd3-supply = <&pp4200_g>; + pvdd4-supply = <&pp4200_g>; regulators { mt6315_6_vbuck1: vbuck1 { @@ -1452,6 +1518,10 @@ mt6315_7: pmic@7 { compatible = "mediatek,mt6315-regulator"; reg = <0x7 SPMI_USID>; + pvdd1-supply = <&pp4200_g>; + pvdd2-supply = <&pp4200_g>; + pvdd3-supply = <&pp4200_g>; + pvdd4-supply = <&pp4200_g>; regulators { mt6315_7_vbuck1: vbuck1 { diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index f1ff64a..ef7afc4 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -47,6 +47,17 @@ reg = <0 0x40000000 0 0x80000000>; }; + /* system critical LDO 1.8V power rail */ + pp1800_ldo_z2: regulator-pp1800-ldo-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp1800_ldo_z2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&pp3300_z2>; + }; + pp3300_disp_x: regulator-pp3300-disp-x { compatible = "regulator-fixed"; regulator-name = "pp3300_disp_x"; @@ -138,6 +149,53 @@ regulator-boot-on; }; + usb_vbus: regulator-5v0-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus"; + enable-active-high; + regulator-always-on; + vin-supply = <&pp5000_s5>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + adsp_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0xd80000>; + no-map; + }; + + afe_mem: memory@60d80000 { + compatible = "shared-dma-pool"; + reg = <0 0x60d80000 0 0x100000>; + no-map; + }; + + adsp_device_mem: memory@60e80000 { + compatible = "shared-dma-pool"; + reg = <0 0x60e80000 0 0x280000>; + no-map; + }; + }; + + spk_amplifier: rt1019p { + compatible = "realtek,rt1019p"; + label = "rt1019p"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&rt1019p_pins_default>; + sdb-gpios = <&pio 100 GPIO_ACTIVE_HIGH>; + }; + /* Murata NCP03WF104F05RL */ tboard_thermistor1: thermal-sensor-t1 { compatible = "generic-adc-thermal"; @@ -208,54 +266,6 @@ 120000 51 125000 44>; }; - - usb_vbus: regulator-5v0-usb-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - }; - - reserved_memory: reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - scp_mem: memory@50000000 { - compatible = "shared-dma-pool"; - reg = <0 0x50000000 0 0x2900000>; - no-map; - }; - - adsp_mem: memory@60000000 { - compatible = "shared-dma-pool"; - reg = <0 0x60000000 0 0xd80000>; - no-map; - }; - - afe_mem: memory@60d80000 { - compatible = "shared-dma-pool"; - reg = <0 0x60d80000 0 0x100000>; - no-map; - }; - - adsp_device_mem: memory@60e80000 { - compatible = "shared-dma-pool"; - reg = <0 0x60e80000 0 0x280000>; - no-map; - }; - }; - - spk_amplifier: rt1019p { - compatible = "realtek,rt1019p"; - label = "rt1019p"; - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&rt1019p_pins_default>; - sdb-gpios = <&pio 100 GPIO_ACTIVE_HIGH>; - }; }; &adsp { @@ -707,8 +717,8 @@ pinctrl-1 = <&mmc1_pins_default>; sd-uhs-sdr50; sd-uhs-sdr104; - vmmc-supply = <&mt_pmic_vmch_ldo_reg>; - vqmmc-supply = <&mt_pmic_vmc_ldo_reg>; + vmmc-supply = <&pp3000_sd>; + vqmmc-supply = <&pp3000_vmc_pmu>; }; &mt6359codec { @@ -763,6 +773,7 @@ spi-max-frequency = <52000000>; spi-rx-bus-width = <2>; spi-tx-bus-width = <2>; + vcc-supply = <&pp1800_ldo_z2>; }; }; @@ -1312,6 +1323,23 @@ &pmic { interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; + vsys-smps-supply = <&pp4200_z2>; + vsys-vcore-supply = <&pp4200_z2>; + vsys-vgpu11-supply = <&pp4200_z2>; + vsys-vgpu12-supply = <&pp4200_z2>; + vsys-vpa-supply = <&pp4200_z2>; + vsys-vproc1-supply = <&pp4200_z2>; + vsys-vproc2-supply = <&pp4200_z2>; + vsys-vpu-supply = <&pp4200_z2>; + vsys-vs1-supply = <&pp4200_z2>; + vsys-vs2-supply = <&pp4200_z2>; + vsys-vmodem-supply = <&pp4200_z2>; + vsys-ldo1-supply = <&pp4200_z2>; + vsys-ldo2-supply = <&pp4200_z2>; + vs1-ldo1-supply = <&mt6359_vs1_buck_reg>; + vs1-ldo2-supply = <&mt6359_vs1_buck_reg>; + vs2-ldo1-supply = <&mt6359_vs2_buck_reg>; + vs2-ldo2-supply = <&mt6359_vs2_buck_reg>; }; &scp { @@ -1408,20 +1436,22 @@ #size-cells = <0>; }; - mt_pmic_vmc_ldo_reg: regulator@0 { + pp3000_vmc_pmu: regulator@0 { compatible = "google,cros-ec-regulator"; reg = <0>; - regulator-name = "mt_pmic_vmc_ldo"; + regulator-name = "pp3000_vmc_pmu"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + vin-supply = <&pp4200_z2>; }; - mt_pmic_vmch_ldo_reg: regulator@1 { + pp3000_sd: regulator@1 { compatible = "google,cros-ec-regulator"; reg = <1>; - regulator-name = "mt_pmic_vmch_ldo"; + regulator-name = "pp3000_sd"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3600000>; + vin-supply = <&pp4200_z2>; }; typec { @@ -1455,6 +1485,10 @@ mt6315@6 { compatible = "mediatek,mt6315-regulator"; reg = <0x6 SPMI_USID>; + pvdd1-supply = <&pp4200_z2>; + pvdd2-supply = <&pp4200_z2>; + pvdd3-supply = <&pp4200_z2>; + pvdd4-supply = <&pp4200_z2>; regulators { mt6315_6_vbuck1: vbuck1 { @@ -1472,6 +1506,10 @@ mt6315@7 { compatible = "mediatek,mt6315-regulator"; reg = <0x7 SPMI_USID>; + pvdd1-supply = <&pp4200_z2>; + pvdd2-supply = <&pp4200_z2>; + pvdd3-supply = <&pp4200_z2>; + pvdd4-supply = <&pp4200_z2>; regulators { mt6315_7_vbuck1: vbuck1 { @@ -1584,21 +1622,23 @@ }; &xhci0 { - status = "okay"; - rx-fifo-depth = <3072>; vbus-supply = <&usb_vbus>; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; }; &xhci2 { - status = "okay"; vbus-supply = <&usb_vbus>; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; }; &xhci3 { /* MT7921's USB Bluetooth has issues with USB2 LPM */ usb2-lpm-disable; vbus-supply = <&pp3300_wlan>; + vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts index 6123367..0d5a75e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts @@ -21,3 +21,10 @@ }; }; +&cpu4 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu5 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi index 2062506..b0c9793 100644 --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi @@ -10,7 +10,7 @@ * AngeloGioacchino Del Regno */ -#include "mt6359.dtsi" +#include "mt6365.dtsi" #include #include #include @@ -285,6 +285,30 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu1 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu2 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu3 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu6 { + cpu-supply = <&mt6319_vbuck1>; +}; + +&cpu7 { + cpu-supply = <&mt6319_vbuck1>; +}; + &disp_dsi0 { #address-cells = <1>; #size-cells = <0>; @@ -445,7 +469,7 @@ mode-switch; orientation-switch; - vcc-supply = <&mt6359_vcn33_1_bt_ldo_reg>; + vcc-supply = <&mt6359_vcn33_1_ldo_reg>; port { it5205_sbu_mux: endpoint { @@ -637,7 +661,7 @@ regulator-always-on; }; -&mt6359_vcn33_2_bt_ldo_reg { +&mt6359_vcn33_2_ldo_reg { regulator-name = "vcn33_2_pmu"; regulator-always-on; }; @@ -695,7 +719,7 @@ regulator-always-on; }; -&mt6359codec { +&mt6365codec { mediatek,mic-type-0 = <1>; /* ACC */ mediatek,mic-type-1 = <3>; /* DCC */ }; @@ -1281,8 +1305,8 @@ interrupt-parent = <&pio>; interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; - mt6359keys: keys { - compatible = "mediatek,mt6359-keys"; + mt6365keys: keys { + compatible = "mediatek,mt6365-keys", "mediatek,mt6359-keys"; mediatek,long-press-mode = <1>; power-off-time-sec = <0>; @@ -1364,6 +1388,50 @@ status = "okay"; }; +&spmi { + #address-cells = <2>; + #size-cells = <0>; + + pmic@6 { + compatible = "mediatek,mt6319-regulator", "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + pvdd1-supply = <®_vsys>; + pvdd2-supply = <®_vsys>; + pvdd3-supply = <®_vsys>; + pvdd4-supply = <®_vsys>; + + regulators { + mt6319_vbuck1: vbuck1 { + regulator-name = "dvdd_proc_b"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + + vbuck3 { + regulator-name = "avdd2_emi"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + + vbuck4 { + regulator-name = "avddq_emi"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; +}; + &uart0 { pinctrl-0 = <&uart0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi index 8da47c9..8406451 100644 --- a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi @@ -58,7 +58,7 @@ regulator-always-on; }; -&mt6359_vcn33_2_bt_ldo_reg { +&mt6359_vcn33_2_ldo_reg { regulator-name = "vcn33_2_pmu"; regulator-always-on; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-tungsten-smarc.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-tungsten-smarc.dtsi index 40b381d..9f5a0ec 100644 --- a/arch/arm64/boot/dts/mediatek/mt8390-tungsten-smarc.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8390-tungsten-smarc.dtsi @@ -46,6 +46,20 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + ddc-i2c-bus = <&hdmi_ddc>; + hdmi-pwr-supply = <&hdmi_phy>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; + firmware { optee { compatible = "linaro,optee-tz"; @@ -283,6 +297,18 @@ remote-endpoint = <&dsi0_in>; }; +&dpi1 { + status = "okay"; +}; + +&dpi1_in { + remote-endpoint = <&merge5_out>; +}; + +&dpi1_out { + remote-endpoint = <&hdmi0_in>; +}; + ð { phy-mode ="rgmii-id"; phy-handle = <ðernet_phy0>; @@ -304,6 +330,35 @@ }; }; +ðdr0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ethdr0_in: endpoint@1 { + reg = <1>; + remote-endpoint = <&vdosys1_ep_ext>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ethdr0_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&merge5_in>; + }; + }; + }; +}; + &gamma0_out { remote-endpoint = <&postmask0_in>; }; @@ -313,6 +368,26 @@ status = "okay"; }; +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + status = "okay"; +}; + +&hdmi0_in { + remote-endpoint = <&dpi1_out>; +}; + +&hdmi0_out { + remote-endpoint = <&hdmi_connector_in>; +}; + +&hdmi_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_vreg_pins>; + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -531,6 +606,35 @@ }; }; +&merge5 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + merge5_in: endpoint@1 { + reg = <1>; + remote-endpoint = <ðdr0_out>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + merge5_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&dpi1_in>; + }; + }; + }; +}; + &mfg0 { domain-supply = <&mt6359_vproc2_buck_reg>; }; @@ -592,7 +696,7 @@ interrupt-names = "msdc", "sdio_wakeup"; interrupts-extended = <&gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>, <&pio 172 IRQ_TYPE_LEVEL_LOW>; - vmmc-supply = <&mt6359_vcn33_2_bt_ldo_reg>; + vmmc-supply = <&mt6359_vcn33_2_ldo_reg>; vqmmc-supply = <&mt6359_vcn18_ldo_reg>; mmc-pwrseq = <&wifi_pwrseq>; status = "okay"; @@ -617,12 +721,12 @@ regulator-boot-on; }; -&mt6359_vcn33_1_bt_ldo_reg { +&mt6359_vcn33_1_ldo_reg { regulator-name = "vcn33_1_pmu"; regulator-always-on; }; -&mt6359_vcn33_2_bt_ldo_reg { +&mt6359_vcn33_2_ldo_reg { regulator-name = "vcn33_2_pmu"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -977,6 +1081,18 @@ }; }; +&vdosys1 { + port { + #address-cells = <1>; + #size-cells = <0>; + + vdosys1_ep_ext: endpoint@1 { + reg = <1>; + remote-endpoint = <ðdr0_in>; + }; + }; +}; + &watchdog { pinctrl-names = "default"; pinctrl-0 = <&watchdog_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi index 62c336e..edc5539 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi @@ -7,7 +7,7 @@ /dts-v1/; #include "mt8195.dtsi" -#include "mt6359.dtsi" +#include "mt6365.dtsi" #include #include #include @@ -201,6 +201,22 @@ enable-active-high; regulator-always-on; }; + + /* system wide 4.2V power rail */ + reg_vsys: regulator-vsys { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-always-on; + regulator-boot-on; + }; + + reg_vsys_buck: regulator-vsys-buck { + compatible = "regulator-fixed"; + regulator-name = "vsys_buck"; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vsys>; + }; }; &adsp { @@ -478,7 +494,11 @@ regulator { compatible = "mediatek,mt6360-regulator"; - LDO_VIN3-supply = <&mt6360_buck2>; + BUCK1_VIN-supply = <®_vsys>; + BUCK2_VIN-supply = <®_vsys>; + LDO_VIN1-supply = <®_vsys_buck>; + LDO_VIN2-supply = <®_vsys_buck>; + LDO_VIN3-supply = <®_vsys>; mt6360_buck1: buck1 { regulator-name = "emi_vdd2"; @@ -701,7 +721,7 @@ regulator-always-on; }; -&mt6359_vcn33_2_bt_ldo_reg { +&mt6359_vcn33_2_ldo_reg { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -728,7 +748,7 @@ regulator-max-microvolt = <750000>; }; -&mt6359codec { +&mt6365codec { mediatek,mic-type-0 = <1>; /* ACC */ mediatek,mic-type-1 = <3>; /* DCC */ mediatek,mic-type-2 = <1>; /* ACC */ @@ -1151,8 +1171,8 @@ &pmic { interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; - mt6359keys: keys { - compatible = "mediatek,mt6359-keys"; + mt6365keys: keys { + compatible = "mediatek,mt6365-keys", "mediatek,mt6359-keys"; mediatek,long-press-mode = <1>; power-off-time-sec = <0>; @@ -1216,8 +1236,8 @@ clocks = <&can_clk>; spi-max-frequency = <20000000>; interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>; - xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>; + vdd-supply = <&mt6359_vcn33_2_ldo_reg>; + xceiver-supply = <&mt6359_vcn33_2_ldo_reg>; }; }; @@ -1238,6 +1258,11 @@ compatible = "mediatek,mt6315-regulator"; reg = <0x6 SPMI_USID>; + pvdd1-supply = <®_vsys>; + pvdd2-supply = <®_vsys>; + pvdd3-supply = <®_vsys>; + pvdd4-supply = <®_vsys>; + regulators { mt6315_6_vbuck1: vbuck1 { regulator-name = "Vbcpu"; @@ -1254,6 +1279,11 @@ compatible = "mediatek,mt6315-regulator"; reg = <0x7 SPMI_USID>; + pvdd1-supply = <®_vsys>; + pvdd2-supply = <®_vsys>; + pvdd3-supply = <®_vsys>; + pvdd4-supply = <®_vsys>; + regulators { mt6315_7_vbuck1: vbuck1 { regulator-name = "Vgpu"; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso index 0389c9c..ecc9fd2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso +++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso @@ -29,7 +29,7 @@ compatible = "radxa,display-8hd-ad002", "jadard,jd9365da-h3"; reg = <0>; backlight = <&backlight>; - vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>; + vdd-supply = <&mt6359_vcn33_2_ldo_reg>; vccio-supply = <&mt6360_ldo2>; reset-gpios = <&pio 108 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -57,7 +57,7 @@ interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>; irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>; - VDDIO-supply = <&mt6359_vcn33_2_bt_ldo_reg>; + VDDIO-supply = <&mt6359_vcn33_2_ldo_reg>; pinctrl-names = "default"; pinctrl-0 = <&touch_pins>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts index bf91305..b279eed 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts @@ -6,7 +6,7 @@ */ #include "mt8195.dtsi" -#include "mt6359.dtsi" +#include "mt6365.dtsi" #include #include #include @@ -614,7 +614,7 @@ regulator-always-on; }; -&mt6359_vcn33_2_bt_ldo_reg { +&mt6359_vcn33_2_ldo_reg { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -1034,8 +1034,8 @@ &pmic { interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; - mt6359keys: keys { - compatible = "mediatek,mt6359-keys"; + mt6365keys: keys { + compatible = "mediatek,mt6365-keys", "mediatek,mt6359-keys"; mediatek,long-press-mode = <1>; power-off-time-sec = <0>; diff --git a/arch/arm64/boot/dts/microchip/lan9691.dtsi b/arch/arm64/boot/dts/microchip/lan9691.dtsi index 235e56b..ed997d8 100644 --- a/arch/arm64/boot/dts/microchip/lan9691.dtsi +++ b/arch/arm64/boot/dts/microchip/lan9691.dtsi @@ -100,6 +100,11 @@ status = "disabled"; }; + otp: otp@e0021000 { + compatible = "microchip,lan9691-otpc"; + reg = <0xe0021000 0x1000>; + }; + flx0: flexcom@e0040000 { compatible = "microchip,lan9691-flexcom", "atmel,sama5d2-flexcom"; reg = <0xe0040000 0x100>; diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts index 9482bec..78534d6 100644 --- a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts +++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts @@ -18,6 +18,8 @@ serial12 = &uart12; serial13 = &uart13; serial14 = &uart14; + ethernet0 = &gmac0; + ethernet1 = &gmac1; }; chosen { @@ -126,3 +128,26 @@ pinctrl-0 = <&pinctrl_uart14>; status = "okay"; }; + +&gmac0 { + status = "okay"; + phy-handle = <ð_phy0>; +}; + +&mdio0 { + eth_phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rmii"; + phy-handle = <ð_phy1>; +}; + +&mdio1 { + eth_phy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts index f6f20a1..a029b66 100644 --- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts +++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts @@ -18,6 +18,8 @@ serial12 = &uart12; serial14 = &uart14; serial16 = &uart16; + ethernet0 = &gmac0; + ethernet1 = &gmac1; }; chosen { @@ -129,3 +131,25 @@ pinctrl-0 = <&pinctrl_uart16>; status = "okay"; }; + +&gmac0 { + status = "okay"; + phy-handle = <ð_phy0>; +}; + +&mdio0 { + eth_phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&gmac1 { + status = "okay"; + phy-handle = <ð_phy1>; +}; + +&mdio1 { + eth_phy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi index e51b98f..7228ad4 100644 --- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi +++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi @@ -379,5 +379,57 @@ clocks = <&clk UART16_GATE>; status = "disabled"; }; + + gmac0: ethernet@40120000 { + compatible = "nuvoton,ma35d1-dwmac", "snps,dwmac-3.70a"; + reg = <0x0 0x40120000 0x0 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + clocks = <&clk EMAC0_GATE>, <&clk EPLL_DIV8>; + clock-names = "stmmaceth", "ptp_ref"; + + nuvoton,sys = <&sys 0>; + resets = <&sys MA35D1_RESET_GMAC0>; + reset-names = "stmmaceth"; + snps,multicast-filter-bins = <0>; + snps,perfect-filter-entries = <8>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + + phy-mode = "rgmii-id"; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gmac1: ethernet@40130000 { + compatible = "nuvoton,ma35d1-dwmac", "snps,dwmac-3.70a"; + reg = <0x0 0x40130000 0x0 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + clocks = <&clk EMAC1_GATE>, <&clk EPLL_DIV8>; + clock-names = "stmmaceth", "ptp_ref"; + + nuvoton,sys = <&sys 1>; + resets = <&sys MA35D1_RESET_GMAC1>; + reset-names = "stmmaceth"; + snps,multicast-filter-bins = <0>; + snps,perfect-filter-entries = <8>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + + phy-mode = "rgmii-id"; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 683ac12..1f5222d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -18,6 +18,11 @@ stdout-path = "serial0:115200n8"; }; + firmware { + #address-cells = <2>; + #size-cells = <2>; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 849694f..eb7e3c6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1722,7 +1722,7 @@ nvidia,apbmisc = <&apbmisc>; }; - iommu@10000000 { + smmu_iso: iommu@10000000 { compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500"; reg = <0x0 0x10000000 0x0 0x800000>; interrupts = , @@ -1795,7 +1795,7 @@ #iommu-cells = <1>; nvidia,memory-controller = <&mc>; - status = "disabled"; + status = "okay"; }; smmu: iommu@12000000 { @@ -1962,6 +1962,7 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; interconnect-names = "dma-mem", "read-1"; + iommus = <&smmu_iso TEGRA194_SID_NVDISPLAY>; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <0>; @@ -1980,6 +1981,7 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; interconnect-names = "dma-mem", "read-1"; + iommus = <&smmu_iso TEGRA194_SID_NVDISPLAY>; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <1>; @@ -1998,6 +2000,7 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; interconnect-names = "dma-mem", "read-1"; + iommus = <&smmu_iso TEGRA194_SID_NVDISPLAY>; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <2>; @@ -2016,6 +2019,7 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; interconnect-names = "dma-mem", "read-1"; + iommus = <&smmu_iso TEGRA194_SID_NVDISPLAY>; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <3>; @@ -2382,6 +2386,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <8000>; bus-range = <0x0 0xff>; @@ -2434,6 +2439,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <8000>; bus-range = <0x0 0xff>; @@ -2486,6 +2492,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <8000>; bus-range = <0x0 0xff>; @@ -2538,6 +2545,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <8000>; bus-range = <0x0 0xff>; @@ -2583,6 +2591,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <8000>; interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; @@ -2629,6 +2638,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <8000>; bus-range = <0x0 0xff>; @@ -2674,6 +2684,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <8000>; interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; @@ -2723,6 +2734,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <8000>; bus-range = <0x0 0xff>; @@ -2771,6 +2783,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <8000>; interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index f0b8c2c..e0fde65 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -25,6 +25,11 @@ stdout-path = "serial0:115200n8"; }; + firmware { + #address-cells = <2>; + #size-cells = <2>; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0xc0000000>; @@ -1467,6 +1472,8 @@ gpio-controller; #gpio-cells = <2>; + system-power-controller; + pinctrl-names = "default"; pinctrl-0 = <&max77620_default>; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 04a95b6..8e0c51e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -3605,7 +3605,7 @@ <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>, <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>, <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>; - clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + clock-names = "mgbe", "mac", "mac-divider", "ptp_ref", "rx-input-m", "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", "rx-pcs", "tx-pcs"; resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>, @@ -3647,7 +3647,7 @@ <&bpmp TEGRA234_CLK_MGBE1_RX_PCS_M>, <&bpmp TEGRA234_CLK_MGBE1_RX_PCS>, <&bpmp TEGRA234_CLK_MGBE1_TX_PCS>; - clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + clock-names = "mgbe", "mac", "mac-divider", "ptp_ref", "rx-input-m", "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", "rx-pcs", "tx-pcs"; resets = <&bpmp TEGRA234_RESET_MGBE1_MAC>, @@ -3689,7 +3689,7 @@ <&bpmp TEGRA234_CLK_MGBE2_RX_PCS_M>, <&bpmp TEGRA234_CLK_MGBE2_RX_PCS>, <&bpmp TEGRA234_CLK_MGBE2_TX_PCS>; - clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + clock-names = "mgbe", "mac", "mac-divider", "ptp_ref", "rx-input-m", "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", "rx-pcs", "tx-pcs"; resets = <&bpmp TEGRA234_RESET_MGBE2_MAC>, @@ -3731,7 +3731,7 @@ <&bpmp TEGRA234_CLK_MGBE3_RX_PCS_M>, <&bpmp TEGRA234_CLK_MGBE3_RX_PCS>, <&bpmp TEGRA234_CLK_MGBE3_TX_PCS>; - clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + clock-names = "mgbe", "mac", "mac-divider", "ptp_ref", "rx-input-m", "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", "rx-pcs", "tx-pcs"; resets = <&bpmp TEGRA234_RESET_MGBE3_MAC>, @@ -4532,6 +4532,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -4586,6 +4587,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -4640,6 +4642,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -4686,6 +4689,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <32000>; interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>, <&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>; @@ -4734,6 +4738,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -4788,6 +4793,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -4842,6 +4848,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -4896,6 +4903,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -4937,6 +4945,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <32000>; interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE4R &emc>, <&mc TEGRA234_MEMORY_CLIENT_PCIE4W &emc>; @@ -4983,6 +4992,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -5037,6 +5047,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -5083,6 +5094,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <32000>; interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; @@ -5131,6 +5143,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -5177,6 +5190,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <32000>; interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>, <&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>; @@ -5225,6 +5239,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <16000>; bus-range = <0x0 0xff>; @@ -5271,6 +5286,7 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + aspm-l1-entry-delay-ns = <32000>; interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>, <&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p4071-0000+p3834-0008.dts b/arch/arm64/boot/dts/nvidia/tegra264-p4071-0000+p3834-0008.dts index df6555b..3bd4c4c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra264-p4071-0000+p3834-0008.dts +++ b/arch/arm64/boot/dts/nvidia/tegra264-p4071-0000+p3834-0008.dts @@ -8,4 +8,16 @@ / { model = "NVIDIA Jetson AGX Thor Developer Kit"; compatible = "nvidia,p4071-0000+p3834-0008", "nvidia,p3834-0008", "nvidia,tegra264"; + + bus@a800000000 { + /* PCIe C2 to enable Ethernet */ + pci@8420000 { + status = "okay"; + }; + + /* PCIe C5 to enable NVME */ + pci@8480000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi index 06d8357..2d8e7e3 100644 --- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi @@ -3277,50 +3277,6 @@ status = "disabled"; }; - gpio_main: gpio@c300000 { - compatible = "nvidia,tegra264-gpio"; - reg = <0x00 0x0c300000 0x0 0x4000>, - <0x00 0x0c310000 0x0 0x4000>; - reg-names = "security", "gpio"; - wakeup-parent = <&pmc>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - serial@c4e0000 { compatible = "nvidia,tegra264-utc"; reg = <0x0 0x0c4e0000 0x0 0x8000>, @@ -3586,6 +3542,50 @@ status = "disabled"; }; + gpio_main: gpio@c300000 { + compatible = "nvidia,tegra264-gpio"; + reg = <0x00 0x0c300000 0x0 0x4000>, + <0x00 0x0c310000 0x0 0x4000>; + reg-names = "security", "gpio"; + wakeup-parent = <&pmc>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + i2c14: i2c@c410000 { compatible = "nvidia,tegra264-i2c"; reg = <0x00 0x0c410000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 4ba8e73..6f33c4e 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb ipq9574-rdp433-emmc.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9650-rdp488.dtb dtb-$(CONFIG_ARCH_QCOM) += kaanapali-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += kaanapali-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk.dtb @@ -56,6 +57,7 @@ lemans-evk-ifp-mezzanine-dtbs := lemans-evk.dtb lemans-evk-ifp-mezzanine.dtbo dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-ifp-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += mahua-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += milos-fairphone-fp6.dtb +dtb-$(CONFIG_ARCH_QCOM) += milos-nothing-asteroids.dtb dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza.dtb dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb @@ -157,6 +159,10 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += purwa-iot-evk.dtb + +purwa-iot-evk-el2-dtbs := purwa-iot-evk.dtb x1-el2.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += purwa-iot-evk-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-particle-tachyon.dtb @@ -302,6 +308,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm632-motorola-ocean.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm670-google-bonito-tianma.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm670-google-sargo.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb @@ -340,6 +347,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-curtana.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7325-motorola-dubai.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7325-nothing-spacewar.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb diff --git a/arch/arm64/boot/dts/qcom/agatti.dtsi b/arch/arm64/boot/dts/qcom/agatti.dtsi index 8a73372..f0b6ae9 100644 --- a/arch/arm64/boot/dts/qcom/agatti.dtsi +++ b/arch/arm64/boot/dts/qcom/agatti.dtsi @@ -433,6 +433,18 @@ interrupt-controller; #interrupt-cells = <2>; }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; soc: soc@0 { @@ -1641,6 +1653,47 @@ }; }; + ipa: ipa@5840000 { + compatible = "qcom,qcm2290-ipa", "qcom,sc7180-ipa"; + + iommus = <&apps_smmu 0x140 0x0>; + reg = <0x0 0x05840000 0x0 0x7000>, + <0x0 0x05847000 0x0 0x2000>, + <0x0 0x05804000 0x0 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 257 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmcc RPM_SMD_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&system_noc MASTER_IPA RPM_ALWAYS_TAG + &system_noc SLAVE_IMEM RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &config_noc SLAVE_IPA_CFG RPM_ACTIVE_TAG>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + gpu: gpu@5900000 { compatible = "qcom,adreno-07000200", "qcom,adreno"; reg = <0x0 0x05900000 0x0 0x40000>, @@ -2455,6 +2508,16 @@ opp-hz = /bits/ 64 <240000000>; required-opps = <&rpmpd_opp_svs>; }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/eliza-mtp.dts b/arch/arm64/boot/dts/qcom/eliza-mtp.dts index 90f6298..1374afd 100644 --- a/arch/arm64/boot/dts/qcom/eliza-mtp.dts +++ b/arch/arm64/boot/dts/qcom/eliza-mtp.dts @@ -6,16 +6,19 @@ /dts-v1/; #include +#include #include #include "eliza.dtsi" +#include "pm7550ba-eliza.dtsi" + / { model = "Qualcomm Technologies, Inc. Eliza MTP"; compatible = "qcom,eliza-mtp", "qcom,eliza"; chassis-type = "handset"; aliases { - serial0 = &uart14; + serial0 = &uart13; }; chosen { @@ -54,6 +57,44 @@ }; }; + pmic-glink { + compatible = "qcom,eliza-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 122 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; + }; + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; @@ -376,13 +417,96 @@ }; }; +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l4b>; + + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + vci-supply = <&vreg_l19b>; + vdd-supply = <&vreg_l1g>; + vddio-supply = <&vreg_l8b>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l2b>; + + status = "okay"; +}; + +&pm7550ba_eusb2_repeater { + vdd18-supply = <&vreg_l7b>; + vdd3-supply = <&vreg_l17b>; +}; + +&remoteproc_adsp { + firmware-name = "qcom/eliza/adsp.mbn", + "qcom/eliza/adsp_dtb.mbn"; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <20 4>, /* NFC SPI */ <111 2>, /* WCN UART1 */ <118 1>; /* NFC Secure I/O */ + + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync: mdp-vsync-state { + pins = "gpio17"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; }; -&uart14 { +&uart13 { compatible = "qcom,geni-debug-uart"; status = "okay"; @@ -405,3 +529,31 @@ status = "okay"; }; + +&usb { + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3g>; + vdda-pll-supply = <&vreg_l7k>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l7k>; + vdda12-supply = <&vreg_l4b>; + + phys = <&pm7550ba_eusb2_repeater>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi index 7e97361..977de44 100644 --- a/arch/arm64/boot/dts/qcom/eliza.dtsi +++ b/arch/arm64/boot/dts/qcom/eliza.dtsi @@ -3,13 +3,19 @@ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ +#include +#include #include #include #include +#include +#include #include #include #include #include +#include +#include #include #include @@ -405,12 +411,12 @@ }; cpusys_vm_mem: cpusys-vm-mem@80e00000 { - reg = <0x0 0x80e00000 0x0 0x40000>; + reg = <0x0 0x80e00000 0x0 0x400000>; no-map; }; cpucp_mem: cpucp@81200000 { - reg = <0x0 0x81200000 0x0 0x200000>; + reg = <0x0 0x81200000 0x0 0x100000>; no-map; }; @@ -444,7 +450,7 @@ no-map; }; - cpucp_scandump_mem: cpucp-scandump@82000000 { + cpucp_scandump_mem: cpucp-scandump@82200000 { reg = <0x0 0x82200000 0x0 0x180000>; no-map; }; @@ -596,6 +602,30 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; @@ -624,6 +654,43 @@ #power-domain-cells = <1>; }; + ipcc: mailbox@406000 { + compatible = "qcom,eliza-ipcc", "qcom,ipcc"; + reg = <0x0 0x00406000 0x0 0x1000>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,eliza-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00800000 0x0 0x60000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + dma-channels = <12>; + dma-channel-mask = <0x3f>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x436 0>; + + dma-coherent; + }; + qupv3_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x2000>; @@ -639,231 +706,1985 @@ #size-cells = <2>; ranges; - uart14: serial@894000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x00894000 0x0 0x4000>; + i2c8: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00880000 0x0 0x4000>; - interrupts = ; + interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; clock-names = "se"; interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", - "qup-config"; + "qup-config", + "qup-memory"; - pinctrl-0 = <&qup_uart14_default>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c8_data_clk>; pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - }; - config_noc: interconnect@1600000 { - compatible = "qcom,eliza-cnoc-cfg"; - reg = <0x0 0x01600000 0x0 0x5200>; - qcom,bcm-voters = <&apps_bcm_voter>; - #interconnect-cells = <2>; - }; + spi8: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00880000 0x0 0x4000>; - cnoc_main: interconnect@1500000 { - compatible = "qcom,eliza-cnoc-main"; - reg = <0x0 0x01500000 0x0 0x16080>; - qcom,bcm-voters = <&apps_bcm_voter>; - #interconnect-cells = <2>; - }; + interrupts = ; - system_noc: interconnect@1680000 { - compatible = "qcom,eliza-system-noc"; - reg = <0x0 0x01680000 0x0 0x40000>; - qcom,bcm-voters = <&apps_bcm_voter>; - #interconnect-cells = <2>; - }; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; - pcie_noc: interconnect@16c0000 { - compatible = "qcom,eliza-pcie-anoc"; - reg = <0x0 0x016c0000 0x0 0x11400>; - qcom,bcm-voters = <&apps_bcm_voter>; - clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, - <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; - #interconnect-cells = <2>; - }; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; - aggre1_noc: interconnect@16e0000 { - compatible = "qcom,eliza-aggre1-noc"; - reg = <0x0 0x016e0000 0x0 0x16400>; - qcom,bcm-voters = <&apps_bcm_voter>; - clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; - #interconnect-cells = <2>; - }; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; - aggre2_noc: interconnect@1700000 { - compatible = "qcom,eliza-aggre2-noc"; - reg = <0x0 0x01700000 0x0 0x1f400>; - qcom,bcm-voters = <&apps_bcm_voter>; - clocks = <&rpmhcc RPMH_IPA_CLK>; - #interconnect-cells = <2>; - }; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; - mmss_noc: interconnect@1780000 { - compatible = "qcom,eliza-mmss-noc"; - reg = <0x0 0x01780000 0x0 0x7d800>; - qcom,bcm-voters = <&apps_bcm_voter>; - #interconnect-cells = <2>; - }; + #address-cells = <1>; + #size-cells = <0>; - ufs_mem_phy: phy@1d80000 { - compatible = "qcom,eliza-qmp-ufs-phy", - "qcom,sm8650-qmp-ufs-phy"; - reg = <0x0 0x01d80000 0x0 0x2000>; + status = "disabled"; + }; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, - <&tcsr TCSR_UFS_CLKREF_EN>; - clock-names = "ref", - "ref_aux", - "qref"; + i2c9: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00884000 0x0 0x4000>; - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; + interrupts = ; - power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; - #clock-cells = <1>; - #phy-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; - status = "disabled"; - }; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; - ufs_mem_hc: ufshc@1d84000 { - compatible = "qcom,eliza-ufshc", - "qcom,ufshc", - "jedec,ufs-2.0"; - reg = <0x0 0x01d84000 0x0 0x3000>, - <0x0 0x01da0000 0x0 0x15000>; - reg-names = "std", - "mcq"; + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; - interrupts = ; + #address-cells = <1>; + #size-cells = <0>; - clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_LN_BB_CLK3>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - clock-names = "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; + status = "disabled"; + }; - operating-points-v2 = <&ufs_opp_table>; + spi9: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00884000 0x0 0x4000>; - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; + interrupts = ; - interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; - interconnect-names = "ufs-ddr", - "cpu-ufs"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; - power-domains = <&gcc GCC_UFS_PHY_GDSC>; - required-opps = <&rpmhpd_opp_nom>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; - iommus = <&apps_smmu 0x60 0x0>; - dma-coherent; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; - msi-parent = <&gic_its 0x60>; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; - lanes-per-direction = <2>; - qcom,ice = <&ice>; + #address-cells = <1>; + #size-cells = <0>; - phys = <&ufs_mem_phy>; - phy-names = "ufsphy"; + status = "disabled"; + }; - #reset-cells = <1>; + i2c10: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00888000 0x0 0x4000>; - status = "disabled"; + interrupts = ; - ufs_opp_table: opp-table { - compatible = "operating-points-v2"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <100000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>; - required-opps = <&rpmhpd_opp_low_svs>; - }; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; - opp-201500000 { - opp-hz = /bits/ 64 <201500000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <201500000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; - opp-403000000 { - opp-hz = /bits/ 64 <403000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <403000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>; - required-opps = <&rpmhpd_opp_nom>; - }; + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; }; - }; - ice: crypto@1d88000 { - compatible = "qcom,eliza-inline-crypto-engine", - "qcom,inline-crypto-engine"; - reg = <0x0 0x01d88000 0x0 0x18000>; + spi10: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c11: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0088c000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi11: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0088c000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c12: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi12: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00890000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart13: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00894000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart13_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + i2c14: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00898000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, + <&gpi_dma2 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c14_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi14: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00898000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c15: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0089c000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>, + <&gpi_dma2 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c15_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi15: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0089c000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>, + <&gpi_dma2 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,eliza-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00a00000 0x0 0x60000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + dma-channels = <12>; + dma-channel-mask = <0x3f>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0xb6 0x0>; + + dma-coherent; + }; + + qupv3_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0xa3 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c0: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a80000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi0: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a80000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a84000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi1: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a84000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c2: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a88000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi2: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a88000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c3: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi3: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c4: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a90000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi4: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a90000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi4_clk>, <&qup_spi4_cs>, + <&qup_spi4_data>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart5: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a94000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart5_default>, <&qup_uart5_cts_rts>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + uart6: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a98000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart6_default>, <&qup_uart6_cts_rts>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + i2c7: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a9c000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi7: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a9c000 0x0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + sdhc_1: mmc@f44000 { + compatible = "qcom,eliza-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x00f44000 0x0 0x1000>, + <0x0 0x00f45000 0x0 0x1000>; + reg-names = "hc", + "cqhci"; + + interrupts = , + ; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + interconnects = <&aggre2_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc 30 /*TODO: SLAVE_SDCC_1*/ QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + qcom,dll-config = <0x000f44ec>; + qcom,ddr-config = <0x80040868>; + + iommus = <&apps_smmu 0x520 0x0>; + dma-coherent; + + bus-width = <8>; + + resets = <&gcc GCC_SDCC1_BCR>; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,eliza-cnoc-main"; + reg = <0x0 0x01500000 0x0 0x16080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,eliza-cnoc-cfg"; + reg = <0x0 0x01600000 0x0 0x5200>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,eliza-system-noc"; + reg = <0x0 0x01680000 0x0 0x40000>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,eliza-pcie-anoc"; + reg = <0x0 0x016c0000 0x0 0x11400>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; + #interconnect-cells = <2>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,eliza-aggre1-noc"; + reg = <0x0 0x016e0000 0x0 0x16400>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + #interconnect-cells = <2>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,eliza-aggre2-noc"; + reg = <0x0 0x01700000 0x0 0x1f400>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_IPA_CLK>; + #interconnect-cells = <2>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,eliza-mmss-noc"; + reg = <0x0 0x01780000 0x0 0x7d800>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,eliza-qmp-ufs-phy", + "qcom,sm8650-qmp-ufs-phy"; + reg = <0x0 0x01d80000 0x0 0x2000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsr TCSR_UFS_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,eliza-ufshc", + "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>, + <0x0 0x01da0000 0x0 0x15000>; + reg-names = "std", + "mcq"; + + interrupts = ; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_LN_BB_CLK3>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + + operating-points-v2 = <&ufs_opp_table>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0x0>; + dma-coherent; + + msi-parent = <&gic_its 0x60>; + + lanes-per-direction = <2>; + qcom,ice = <&ice>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-201500000 { + opp-hz = /bits/ 64 <201500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <201500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-403000000 { + opp-hz = /bits/ 64 <403000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <403000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + ice: crypto@1d88000 { + compatible = "qcom,eliza-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0x0 0x01d88000 0x0 0x18000>; + + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>; + clock-names = "core", + "iface"; + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x28000>; + + interrupts = ; + + #dma-cells = <1>; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + + qcom,ee = <0>; + qcom,num-ees = <4>; + num-channels = <20>; + qcom,controlled-remotely; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,eliza-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fbf000 { + compatible = "qcom,eliza-tcsr", "syscon"; + reg = <0x0 0x01fbf000 0x0 0x21000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,eliza-adsp-pas"; + reg = <0x0 0x03000000 0x0 0x10000>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,eliza-lpass-lpiaon-noc"; + reg = <0x0 0x07400000 0x0 0x19080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + lpass_lpicx_noc: interconnect@7420000 { + compatible = "qcom,eliza-lpass-lpicx-noc"; + reg = <0x0 0x07420000 0x0 0x44080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,eliza-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x08804000 0x0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + qcom,dll-config = <0x0007442c>; + qcom,ddr-config = <0x80040868>; + + iommus = <&apps_smmu 0x540 0x0>; + dma-coherent; + + bus-width = <4>; + + resets = <&gcc GCC_SDCC2_BCR>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + usb_hsphy: phy@88e3000 { + compatible = "qcom,eliza-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x088e3000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,eliza-qmp-usb3-dp-phy", + "qcom,sm8650-qmp-usb3-dp-phy"; + reg = <0x0 0x088e8000 0x0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&tcsr TCSR_USB3_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc GCC_USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + mode-switch; + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + }; + }; + + usb: usb@a600000 { + compatible = "qcom,eliza-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; + + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + phys = <&usb_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", "apps-usb"; + + iommus = <&apps_smmu 0x40 0x0>; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + + dma-coherent; + usb-role-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; + }; + }; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,eliza-mdss"; + reg = <0x0 0x0ae00000 0x0 0x1000>; + reg-names = "mdss"; + ranges; + + interrupts = ; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x800 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,eliza-dpu"; + reg = <0x0 0x0ae01000 0x0 0x93000>, + <0x0 0x0aeb0000 0x0 0x3000>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@2 { + reg = <2>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + /* TODO: HDMI */ + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-207000000 { + opp-hz = /bits/ 64 <207000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-417000000 { + opp-hz = /bits/ 64 <417000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-532000000 { + opp-hz = /bits/ 64 <532000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + + opp-660000000 { + opp-hz = /bits/ 64 <660000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,eliza-dsi-ctrl", "qcom,sm8750-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&dispcc DISP_CC_ESYNC0_CLK>, + <&dispcc DISP_CC_OSC_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus", + "dsi_pll_pixel", + "dsi_pll_byte", + "esync", + "osc", + "byte_src", + "pixel_src"; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-140630000 { + opp-hz = /bits/ 64 <140630000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,eliza-dsi-phy-4nm", "qcom,sm8650-dsi-phy-4nm"; + reg = <0x0 0x0ae95000 0x0 0x200>, + <0x0 0x0ae95200 0x0 0x300>, + <0x0 0x0ae95500 0x0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&bi_tcxo_div2>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,eliza-dsi-ctrl", "qcom,sm8750-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae96000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&dispcc DISP_CC_ESYNC1_CLK>, + <&dispcc DISP_CC_OSC_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus", + "dsi_pll_pixel", + "dsi_pll_byte", + "esync", + "osc", + "byte_src", + "pixel_src"; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae97000 { + compatible = "qcom,eliza-dsi-phy-4nm", "qcom,sm8650-dsi-phy-4nm"; + reg = <0x0 0x0ae97000 0x0 0x200>, + <0x0 0x0ae97200 0x0 0x300>, + <0x0 0x0ae97500 0x0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp0: displayport-controller@af54000 { + compatible = "qcom,eliza-dp", "qcom,sm8650-dp"; + reg = <0x0 0x0af54000 0x0 0x200>, + <0x0 0x0af54200 0x0 0x200>, + <0x0 0x0af55000 0x0 0xc00>, + <0x0 0x0af56000 0x0 0x400>, + <0x0 0x0af57000 0x0 0x400>, + <0x0 0x0af58000 0x0 0x400>, + <0x0 0x0af59000 0x0 0x400>, + <0x0 0x0af5a000 0x0 0x600>, + <0x0 0x0af5b000 0x0 0x600>; + + interrupts-extended = <&mdss 12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>; + assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&dp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_CX>; + + phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>; - clock-names = "core", - "iface"; - power-domains = <&gcc GCC_UFS_PHY_GDSC>; + mdss_dp0_out: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&usb_dp_qmpphy_dp_in>; + }; + }; + }; + }; }; - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex"; - reg = <0x0 0x01f40000 0x0 0x20000>; - #hwlock-cells = <1>; - }; + dispcc: clock-controller@af00000 { + compatible = "qcom,eliza-dispcc"; + reg = <0x0 0x0af00000 0x0 0x20000>; - tcsr: clock-controller@1fbf000 { - compatible = "qcom,eliza-tcsr", "syscon"; - reg = <0x0 0x01fbf000 0x0 0x21000>; + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>, + <0>; /* HDMI phy */ - clocks = <&rpmhcc RPMH_CXO_CLK>; + power-domains = <&rpmhpd RPMHPD_MX>; + required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; }; lpass_ag_noc: interconnect@7e40000 { @@ -873,20 +2694,6 @@ #interconnect-cells = <2>; }; - lpass_lpiaon_noc: interconnect@7400000 { - compatible = "qcom,eliza-lpass-lpiaon-noc"; - reg = <0x0 0x07400000 0x0 0x19080>; - qcom,bcm-voters = <&apps_bcm_voter>; - #interconnect-cells = <2>; - }; - - lpass_lpicx_noc: interconnect@7420000 { - compatible = "qcom,eliza-lpass-lpicx-noc"; - reg = <0x0 0x07420000 0x0 0x44080>; - qcom,bcm-voters = <&apps_bcm_voter>; - #interconnect-cells = <2>; - }; - pdc: interrupt-controller@b220000 { compatible = "qcom,eliza-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x40000>, @@ -961,6 +2768,18 @@ #thermal-sensor-cells = <1>; }; + aoss_qmp: power-management@c300000 { + compatible = "qcom,eliza-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + spmi: arbiter@c400000 { compatible = "qcom,eliza-spmi-pmic-arb", "qcom,x1e80100-spmi-pmic-arb"; @@ -1009,6 +2828,480 @@ }; }; + tlmm: pinctrl@f100000 { + compatible = "qcom,eliza-tlmm"; + reg = <0x0 0x0f100000 0x0 0xf00000>; + + interrupts = ; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 184>; + wakeup-parent = <&pdc>; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + pins = "gpio28", "gpio29"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio31"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio28", "gpio29", "gpio30"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + pins = "gpio32", "gpio33"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio35"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + pins = "gpio52", "gpio53"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio55"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + pins = "gpio44", "gpio45"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio47"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + pins = "gpio36", "gpio37"; + function = "qup1_se4_01"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_clk: qup-spi4-clk-state { + pins = "gpio37"; + function = "qup1_se4_23"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio36"; + function = "qup1_se4_23"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data: qup-spi4-data-state { + pins = "gpio36", "gpio37"; + function = "qup1_se4_01"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart5_default: qup-uart5-default-state { + /* TX, RX */ + pins = "gpio134", "gpio135"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart5_cts_rts: qup-uart5-cts-rts-state { + /* CTS, RTS */ + pins = "gpio132", "gpio133"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-down; + }; + + qup_uart6_default: qup-uart6-default-state { + /* TX, RX */ + pins = "gpio42", "gpio40"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart6_cts_rts: qup-uart6-cts-rts-state { + /* CTS, RTS */ + pins = "gpio40", "gpio42"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-down; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + pins = "gpio81", "gpio80"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio78"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + pins = "gpio81", "gpio80", "gpio114"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + pins = "gpio0", "gpio1"; + function = "qup2_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio3"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + pins = "gpio4", "gpio5"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio7"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + pins = "gpio8", "gpio9"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio11"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + pins = "gpio79", "gpio97"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio116"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + pins = "gpio79", "gpio97", "gpio100"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + pins = "gpio12", "gpio13"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio27"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + pins = "gpio12", "gpio13", "gpio26"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart13_default: qup-uart13-default-state { + /* TX, RX */ + pins = "gpio18", "gpio19"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + pins = "gpio20", "gpio21"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio23"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio20", "gpio21", "gpio22"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + pins = "gpio27", "gpio26"; + function = "qup2_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio12"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio27", "gpio26", "gpio13"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "gpio121"; + function = "sdc1"; + drive-strength = <12>; + bias-disable; + }; + + cmd-pins { + pins = "gpio123"; + function = "sdc1"; + drive-strength = <12>; + bias-pull-up; + }; + + data-pins { + pins = "gpio124", "gpio125", + "gpio126", "gpio127", + "gpio128", "gpio129", + "gpio130", "gpio131"; + function = "sdc1"; + drive-strength = <12>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio120"; + function = "sdc1"; + bias-pull-down; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "gpio121"; + function = "sdc1"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "gpio123"; + function = "sdc1"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "gpio124", "gpio125", + "gpio126", "gpio127", + "gpio128", "gpio129", + "gpio130", "gpio131"; + function = "sdc1"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio120"; + function = "sdc1"; + bias-pull-down; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "gpio62"; + function = "sdc2"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "gpio51"; + function = "sdc2"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "gpio38", "gpio39", + "gpio48", "gpio49"; + function = "sdc2"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "gpio62"; + function = "sdc2"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "gpio51"; + function = "sdc2"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "gpio38", "gpio39", + "gpio48", "gpio49"; + function = "sdc2"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + sram@14680000 { + compatible = "qcom,eliza-imem", "mmio-sram"; + reg = <0x0 0x14680000 0x0 0x2c000>; + ranges = <0x0 0x0 0x14680000 0x2c000>; + + no-memory-wc; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc-sram@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + + ipa_modem_tables: modem-tables-sram@3000 { + reg = <0x3000 0x2000>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,eliza-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x15000000 0x0 0x100000>; @@ -1323,30 +3616,6 @@ #clock-cells = <1>; }; - tlmm: pinctrl@f100000 { - compatible = "qcom,eliza-tlmm"; - reg = <0x0 0x0f100000 0x0 0xf00000>; - - interrupts = ; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - - gpio-ranges = <&tlmm 0 0 184>; - wakeup-parent = <&pdc>; - - qup_uart14_default: qup-uart14-default-state { - /* TX, RX */ - pins = "gpio18", "gpio19"; - function = "qup2_se5"; - drive-strength = <2>; - bias-pull-up; - }; - }; - gem_noc: interconnect@24100000 { compatible = "qcom,eliza-gem-noc"; reg = <0x0 0x24100000 0x0 0x163080>; @@ -1354,6 +3623,20 @@ #interconnect-cells = <2>; }; + system-cache-controller@24800000 { + compatible = "qcom,eliza-llcc"; + reg = <0x0 0x24800000 0x0 0x200000>, + <0x0 0x24c00000 0x0 0x200000>, + <0x0 0x26800000 0x0 0x200000>, + <0x0 0x26c00000 0x0 0x200000>; + reg-names = "llcc0_base", + "llcc2_base", + "llcc_broadcast_base", + "llcc_broadcast_and_base"; + + interrupts = ; + }; + nsp_noc: interconnect@320c0000 { compatible = "qcom,eliza-nsp-noc"; reg = <0x0 0x320c0000 0x0 0xe080>; diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts index 35aaf09..c98dfb3 100644 --- a/arch/arm64/boot/dts/qcom/glymur-crd.dts +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts @@ -322,8 +322,6 @@ }; &usb_0 { - dr_mode = "host"; - status = "okay"; }; @@ -353,8 +351,6 @@ }; &usb_1 { - dr_mode = "host"; - status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi index 2852d25..e784b53 100644 --- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi @@ -10,6 +10,8 @@ #include "pmk8850.dtsi" /* SPMI0: SID-0 */ #include "smb2370.dtsi" /* SPMI2: SID-9/10/11 */ +#include + / { model = "Qualcomm Technologies, Inc. Glymur CRD"; compatible = "qcom,glymur-crd", "qcom,glymur"; @@ -44,7 +46,7 @@ gpio-keys { compatible = "gpio-keys"; - pinctrl-0 = <&key_vol_up_default>; + pinctrl-0 = <&key_vol_up_default>, <&hall_int_n_default>; pinctrl-names = "default"; key-volume-up { @@ -55,6 +57,15 @@ linux,can-disable; wakeup-source; }; + + switch-lid { + label = "lid"; + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + wakeup-source; + wakeup-event-action = ; + }; }; vreg_nvme: regulator-nvme { @@ -560,11 +571,31 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/glymur/adsp.mbn", + "qcom/glymur/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/glymur/cdsp.mbn", + "qcom/glymur/cdsp_dtb.mbn"; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */ <10 2>, /* OOB UART */ <44 4>; /* Security SPI (TPM) */ + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + pcie4_default: pcie4-default-state { clkreq-n-pins { pins = "gpio147"; diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi index 8243698..20b49af 100644 --- a/arch/arm64/boot/dts/qcom/glymur.dtsi +++ b/arch/arm64/boot/dts/qcom/glymur.dtsi @@ -5,7 +5,10 @@ #include #include +#include #include +#include +#include #include #include #include @@ -39,6 +42,7 @@ power-domains = <&cpu_pd0>, <&scmi_perf 0>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_0>; + #cooling-cells = <2>; l2_0: l2-cache { compatible = "cache"; @@ -55,6 +59,7 @@ power-domains = <&cpu_pd1>, <&scmi_perf 0>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_0>; + #cooling-cells = <2>; }; cpu2: cpu@200 { @@ -65,6 +70,7 @@ power-domains = <&cpu_pd2>, <&scmi_perf 0>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_0>; + #cooling-cells = <2>; }; cpu3: cpu@300 { @@ -75,6 +81,7 @@ power-domains = <&cpu_pd3>, <&scmi_perf 0>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_0>; + #cooling-cells = <2>; }; cpu4: cpu@400 { @@ -85,6 +92,7 @@ power-domains = <&cpu_pd4>, <&scmi_perf 0>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_0>; + #cooling-cells = <2>; }; cpu5: cpu@500 { @@ -95,6 +103,7 @@ power-domains = <&cpu_pd5>, <&scmi_perf 0>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_0>; + #cooling-cells = <2>; }; cpu6: cpu@10000 { @@ -105,6 +114,7 @@ power-domains = <&cpu_pd6>, <&scmi_perf 1>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_1>; + #cooling-cells = <2>; l2_1: l2-cache { compatible = "cache"; @@ -121,6 +131,7 @@ power-domains = <&cpu_pd7>, <&scmi_perf 1>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_1>; + #cooling-cells = <2>; }; cpu8: cpu@10200 { @@ -131,6 +142,7 @@ power-domains = <&cpu_pd8>, <&scmi_perf 1>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_1>; + #cooling-cells = <2>; }; cpu9: cpu@10300 { @@ -141,6 +153,7 @@ power-domains = <&cpu_pd9>, <&scmi_perf 1>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_1>; + #cooling-cells = <2>; }; cpu10: cpu@10400 { @@ -151,6 +164,7 @@ power-domains = <&cpu_pd10>, <&scmi_perf 1>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_1>; + #cooling-cells = <2>; }; cpu11: cpu@10500 { @@ -161,6 +175,7 @@ power-domains = <&cpu_pd11>, <&scmi_perf 1>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_1>; + #cooling-cells = <2>; }; cpu12: cpu@20000 { @@ -171,6 +186,7 @@ power-domains = <&cpu_pd12>, <&scmi_perf 2>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_2>; + #cooling-cells = <2>; l2_2: l2-cache { compatible = "cache"; @@ -187,6 +203,7 @@ power-domains = <&cpu_pd13>, <&scmi_perf 2>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_2>; + #cooling-cells = <2>; }; cpu14: cpu@20200 { @@ -197,6 +214,7 @@ power-domains = <&cpu_pd14>, <&scmi_perf 2>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_2>; + #cooling-cells = <2>; }; cpu15: cpu@20300 { @@ -207,6 +225,7 @@ power-domains = <&cpu_pd15>, <&scmi_perf 2>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_2>; + #cooling-cells = <2>; }; cpu16: cpu@20400 { @@ -217,6 +236,7 @@ power-domains = <&cpu_pd16>, <&scmi_perf 2>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_2>; + #cooling-cells = <2>; }; cpu17: cpu@20500 { @@ -227,6 +247,7 @@ power-domains = <&cpu_pd17>, <&scmi_perf 2>; power-domain-names = "psci", "perf"; next-level-cache = <&l2_2>; + #cooling-cells = <2>; }; cpu-map { @@ -341,6 +362,18 @@ }; }; + dummy-sink { + compatible = "arm,coresight-dummy-sink"; + + in-ports { + port { + eud_in: endpoint { + remote-endpoint = <&swao_rep_out1>; + }; + }; + }; + }; + firmware { scm: scm { compatible = "qcom,scm-glymur", "qcom,scm"; @@ -968,7 +1001,7 @@ i2c19: i2c@88c000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x0088c000 0x0 0x4000>; - interrupts = ; + interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; clock-names = "se"; interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS @@ -2770,10 +2803,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 0 513 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 0 514 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 0 515 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 0 516 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_4_AUX_CLK>, <&gcc GCC_PCIE_4_CFG_AHB_CLK>, @@ -2980,10 +3013,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 0 526 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 0 428 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 0 429 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_5_AUX_CLK>, <&gcc GCC_PCIE_5_CFG_AHB_CLK>, @@ -3246,10 +3279,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 0 472 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 0 473 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 0 474 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 0 475 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_6_AUX_CLK>, <&gcc GCC_PCIE_6_CFG_AHB_CLK>, @@ -3456,10 +3489,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 0 831 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 0 832 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 0 833 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 0 834 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, @@ -3669,6 +3702,32 @@ status = "disabled"; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x28000>; + interrupts = ; + #dma-cells = <1>; + iommus = <&apps_smmu 0x80 0x0>, + <&apps_smmu 0x81 0x0>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <20>; + qcom,num-ees = <4>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,glymur-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", + "tx"; + iommus = <&apps_smmu 0x80 0x0>, + <&apps_smmu 0x81 0x0>; + interconnects = <&aggre1_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; @@ -3692,6 +3751,34 @@ #interconnect-cells = <2>; }; + gxclkctl: clock-controller@3d64000 { + compatible = "qcom,glymur-gxclkctl"; + reg = <0x0 0x03d64000 0x0 0x6000>; + + power-domains = <&rpmhpd RPMHPD_GFX>, + <&rpmhpd RPMHPD_GMXC>, + <&gpucc GPU_CC_CX_GDSC>; + + #power-domain-cells = <1>; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,glymur-gpucc"; + reg = <0x0 0x03d90000 0x0 0x9800>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + + power-domains = <&rpmhpd RPMHPD_MX>, + <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + ipcc: mailbox@3e04000 { compatible = "qcom,glymur-ipcc", "qcom,ipcc"; reg = <0x0 0x03e04000 0x0 0x1000>; @@ -3703,6 +3790,122 @@ #mbox-cells = <2>; }; + remoteproc_adsp: remoteproc@6800000 { + compatible = "qcom,glymur-adsp-pas", "qcom,sm8550-adsp-pas"; + reg = <0x0 0x06800000 0x0 0x10000>; + + iommus = <&apps_smmu 0x1000 0x0>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_MPROC_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_MPROC_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <2>; + + label = "lpass"; + + fastrpc { + compatible = "qcom,glymur-fastrpc", "qcom,kaanapali-fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1063 0x20>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1064 0x20>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1065 0x20>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1066 0x20>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + + iommus = <&apps_smmu 0x1007 0x40>, + <&apps_smmu 0x1067 0x0>, + <&apps_smmu 0x1087 0x0>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + + iommus = <&apps_smmu 0x1008 0x80>, + <&apps_smmu 0x1068 0x20>; + dma-coherent; + }; + }; + }; + }; + lpass_lpiaon_noc: interconnect@7400000 { compatible = "qcom,glymur-lpass-lpiaon-noc"; reg = <0x0 0x07400000 0x0 0x19080>; @@ -3920,6 +4123,8 @@ snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + usb-role-switch; + status = "disabled"; ports { @@ -3993,6 +4198,8 @@ snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + usb-role-switch; + status = "disabled"; ports { @@ -4016,7 +4223,7 @@ }; }; - usb_hs: usb@a2f8800 { + usb_hs: usb@a200000 { compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3"; reg = <0x0 0x0a200000 0x0 0xfc100>; @@ -4581,6 +4788,22 @@ }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,glymur-videocc"; + reg = <0x0 0x0aaf0000 0x0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + + power-domains = <&rpmhpd RPMHPD_MMCX>, + <&rpmhpd RPMHPD_MXC>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,glymur-dispcc"; reg = <0x0 0x0af00000 0x0 0x20000>; @@ -5493,183 +5716,1212 @@ }; }; - apps_smmu: iommu@15000000 { - compatible = "qcom,glymur-smmu-500", - "qcom,smmu-500", - "arm,mmu-500"; - reg = <0x0 0x15000000 0x0 0x100000>; - - #iommu-cells = <2>; - #global-interrupts = <1>; - - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; + stm: stm@10002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x0 0x10002000 0x0 0x1000>, + <0x0 0x16280000 0x0 0x180000>; + reg-names = "stm-base", + "stm-stimulus-base"; - dma-coherent; - }; + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; - pcie_smmu: iommu@15480000 { - compatible = "arm,smmu-v3"; - reg = <0x0 0x15480000 0x0 0x20000>; - interrupts = , - , - ; - interrupt-names = "eventq", "cmdq-sync", "gerror"; - dma-coherent; - #iommu-cells = <1>; + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; }; - intc: interrupt-controller@17000000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x17000000 0x0 0x10000>, - <0x0 0x17080000 0x0 0x480000>; + tpda@10004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x10004000 0x0 0x1000>; - interrupts = ; + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; - #interrupt-cells = <3>; - interrupt-controller; + in-ports { + #address-cells = <1>; + #size-cells = <0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + port@1 { + reg = <1>; - gic_its: msi-controller@17040000 { - compatible = "arm,gic-v3-its"; - reg = <0x0 0x17040000 0x0 0x40000>; + qdss_tpda_in1: endpoint { + remote-endpoint = <&spdm_tpdm_out>; + }; + }; + }; - msi-controller; - #msi-cells = <1>; + out-ports { + port { + qdss_tpda_out: endpoint { + remote-endpoint = <&funnel0_in6>; + }; + }; }; }; - watchdog@17600000 { - compatible = "qcom,apss-wdt-glymur", "qcom,kpss-wdt"; - reg = <0x0 0x17600000 0x0 0x1000>; - clocks = <&sleep_clk>; - interrupts = ; - }; + tpdm@1000f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1000f000 0x0 0x1000>; - pdp0_mbox: mailbox@17610000 { - compatible = "qcom,glymur-cpucp-mbox", "qcom,x1e80100-cpucp-mbox"; - reg = <0x0 0x17610000 0 0x8000>, <0 0x19980000 0 0x8000>; - interrupts = ; - #mbox-cells = <1>; - }; + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; - timer@17810000 { - compatible = "arm,armv7-timer-mem"; - reg = <0x0 0x17810000 0x0 0x1000>; + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + spdm_tpdm_out: endpoint { + remote-endpoint = <&qdss_tpda_in1>; + }; + }; + }; + }; + + funnel@10041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10041000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + funnel0_in0: endpoint { + remote-endpoint = <&tn_ag_out>; + }; + }; + + port@6 { + reg = <6>; + + funnel0_in6: endpoint { + remote-endpoint = <&qdss_tpda_out>; + }; + }; + + port@7 { + reg = <7>; + + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&aoss_funnel_in6>; + }; + }; + }; + }; + + tpdm@1102c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1102c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + gcc_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in36>; + }; + }; + }; + }; + + tpdm@11180000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11180000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + cdsp_tpdm_out: endpoint { + remote-endpoint = <&cdsp_tpda_in0>; + }; + }; + }; + }; + + tpdm@11185000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11185000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + cdsp_dpm1_tpdm_out: endpoint { + remote-endpoint = <&cdsp_tpda_in5>; + }; + }; + }; + }; + + tpdm@11186000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11186000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + cdsp_dpm2_tpdm_out: endpoint { + remote-endpoint = <&cdsp_tpda_in6>; + }; + }; + }; + }; + + tpda@11188000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x11188000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + cdsp_tpda_in0: endpoint { + remote-endpoint = <&cdsp_tpdm_out>; + }; + }; + + port@1 { + reg = <1>; + + cdsp_tpda_in1: endpoint { + remote-endpoint = <&cdsp_llm_tpdm_out>; + }; + }; + + port@2 { + reg = <2>; + + cdsp_tpda_in2: endpoint { + remote-endpoint = <&cdsp_llm2_tpdm_out>; + }; + }; + + port@3 { + reg = <3>; + + cdsp_tpda_in3: endpoint { + remote-endpoint = <&cdsp_cmsr_tpdm_out>; + }; + }; + + port@4 { + reg = <4>; + + cdsp_tpda_in4: endpoint { + remote-endpoint = <&cdsp_cmsr2_tpdm_out>; + }; + }; + + port@5 { + reg = <5>; + + cdsp_tpda_in5: endpoint { + remote-endpoint = <&cdsp_dpm1_tpdm_out>; + }; + }; + + port@6 { + reg = <6>; + + cdsp_tpda_in6: endpoint { + remote-endpoint = <&cdsp_dpm2_tpdm_out>; + }; + }; + }; + + out-ports { + port { + cdsp_tpda_out: endpoint { + remote-endpoint = <&cdsp_funnel_in0>; + }; + }; + }; + }; + + funnel@11189000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x11189000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + cdsp_funnel_in0: endpoint { + remote-endpoint = <&cdsp_tpda_out>; + }; + }; + }; + + out-ports { + port { + cdsp_funnel_out: endpoint { + remote-endpoint = <&tn_ag_in53>; + }; + }; + }; + }; + + cti@11193000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x11193000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti_wpss: cti@111ab000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x111ab000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + tpdm@111d0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x111d0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + qm_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in35>; + }; + }; + }; + }; + + itnoc@11200000 { + compatible = "qcom,coresight-itnoc"; + reg = <0x0 0x11200000 0x0 0x3c00>; + + clocks = <&aoss_qmp>; + clock-names = "apb"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + + tn_ag_in6: endpoint { + remote-endpoint = <&mm_dsb_tpdm_out>; + }; + }; + + port@10 { + reg = <0x10>; + + tn_ag_in16: endpoint { + remote-endpoint = <&east_dsb_tpdm_out>; + }; + }; + + port@21 { + reg = <0x21>; + + tn_ag_in33: endpoint { + remote-endpoint = <&west_dsb_tpdm_out>; + }; + }; + + port@23 { + reg = <0x23>; + + tn_ag_in35: endpoint { + remote-endpoint = <&qm_tpdm_out>; + }; + }; + + port@24 { + reg = <0x24>; + + tn_ag_in36: endpoint { + remote-endpoint = <&gcc_tpdm_out>; + }; + }; + + port@32 { + reg = <0x32>; + + tn_ag_in50: endpoint { + remote-endpoint = <&pcie_rscc_tpda_out>; + }; + }; + + port@35 { + reg = <0x35>; + + tn_ag_in53: endpoint { + remote-endpoint = <&cdsp_funnel_out>; + }; + }; + + port@3f { + reg = <0x3f>; + + tn_ag_in63: endpoint { + remote-endpoint = <¢er_dsb_tpdm_out>; + }; + }; + + port@40 { + reg = <0x40>; + + tn_ag_in64: endpoint { + remote-endpoint = <&ipcc_cmb_tpdm_out>; + }; + }; + + port@41 { + reg = <0x41>; + + tn_ag_in65: endpoint { + remote-endpoint = <&qrng_tpdm_out>; + }; + }; + + port@42 { + reg = <0x42>; + + tn_ag_in66: endpoint { + remote-endpoint = <&pmu_tpdm_out>; + }; + }; + + port@43 { + reg = <0x43>; + + tn_ag_in67: endpoint { + remote-endpoint = <&rdpm_west_cmb0_tpdm_out>; + }; + }; + + port@44 { + reg = <0x44>; + + tn_ag_in68: endpoint { + remote-endpoint = <&rdpm_west_cmb1_tpdm_out>; + }; + }; + + port@45 { + reg = <0x45>; + + tn_ag_in69: endpoint { + remote-endpoint = <&rdpm_west_cmb2_tpdm_out>; + }; + }; + + port@4b { + reg = <0x4b>; + + tn_ag_in75: endpoint { + remote-endpoint = <&south_dsb2_tpdm_out>; + }; + }; + + port@52 { + reg = <0x52>; + + tn_ag_in82: endpoint { + remote-endpoint = <&south_dsb_tpdm_out>; + }; + }; + + port@53 { + reg = <0x53>; + + tn_ag_in83: endpoint { + remote-endpoint = <¢er_dsb1_tpdm_out>; + }; + }; + }; + + out-ports { + port { + tn_ag_out: endpoint { + remote-endpoint = <&funnel0_in0>; + }; + }; + }; + }; + + tpdm@11207000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11207000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + mm_dsb_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in6>; + }; + }; + }; + }; + + tpdm@1120b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1120b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + east_dsb_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in16>; + }; + }; + }; + }; + + tpdm@11213000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11213000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + west_dsb_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in33>; + }; + }; + }; + }; + + tpdm@11219000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11219000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + center_dsb_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in63>; + }; + }; + }; + }; + + tpdm@1121a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1121a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + ipcc_cmb_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in64>; + }; + }; + }; + }; + + tpdm@1121b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1121b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + qrng_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in65>; + }; + }; + }; + }; + + tpdm@1121c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1121c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + pmu_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in66>; + }; + }; + }; + }; + + tpdm@1121d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1121d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + rdpm_west_cmb0_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in67>; + }; + }; + }; + }; + + tpdm@1121e000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1121e000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + rdpm_west_cmb1_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in68>; + }; + }; + }; + }; + + tpdm@1121f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1121f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + rdpm_west_cmb2_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in69>; + }; + }; + }; + }; + + tpdm@11220000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11220000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + center_dsb1_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in83>; + }; + }; + }; + }; + + tpdm@11224000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11224000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + south_dsb2_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in75>; + }; + }; + }; + }; + + tpdm@11228000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11228000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + south_dsb_tpdm_out: endpoint { + remote-endpoint = <&tn_ag_in82>; + }; + }; + }; + }; + + tpdm@11470000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11470000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + pcie_rscc_tpdm_out: endpoint { + remote-endpoint = <&pcie_rscc_tpda_in0>; + }; + }; + }; + }; + + tpda@11471000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x11471000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + pcie_rscc_tpda_in0: endpoint { + remote-endpoint = <&pcie_rscc_tpdm_out>; + }; + }; + }; + + out-ports { + port { + pcie_rscc_tpda_out: endpoint { + remote-endpoint = <&tn_ag_in50>; + }; + }; + }; + }; + + tpdm@11c03000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11c03000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio4_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in4>; + }; + }; + }; + }; + + funnel@11c04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x11c04000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@5 { + reg = <5>; + + aoss_funnel_in5: endpoint { + remote-endpoint = <&aoss_tpda_out>; + }; + }; + + port@6 { + reg = <6>; + + aoss_funnel_in6: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + }; + + out-ports { + port { + aoss_funnel_out: endpoint { + remote-endpoint = <&etf0_in>; + }; + }; + }; + }; + + tmc_etf: tmc@11c05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x11c05000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + etf0_in: endpoint { + remote-endpoint = <&aoss_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf0_out: endpoint { + remote-endpoint = <&swao_rep_in>; + }; + }; + }; + }; + + replicator@11c06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x11c06000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + swao_rep_in: endpoint { + remote-endpoint = <&etf0_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + swao_rep_out1: endpoint { + remote-endpoint = <&eud_in>; + }; + }; + }; + }; + + tpda@11c08000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x11c08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + aoss_tpda_in0: endpoint { + remote-endpoint = <&swao_prio0_tpdm_out>; + }; + }; + + port@1 { + reg = <1>; + + aoss_tpda_in1: endpoint { + remote-endpoint = <&swao_prio1_tpdm_out>; + }; + }; + + port@2 { + reg = <2>; + + aoss_tpda_in2: endpoint { + remote-endpoint = <&swao_prio2_tpdm_out>; + }; + }; + + port@3 { + reg = <3>; + + aoss_tpda_in3: endpoint { + remote-endpoint = <&swao_prio3_tpdm_out>; + }; + }; + + port@4 { + reg = <4>; + + aoss_tpda_in4: endpoint { + remote-endpoint = <&swao_prio4_tpdm_out>; + }; + }; + + port@5 { + reg = <5>; + + aoss_tpda_in5: endpoint { + remote-endpoint = <&swao_tpdm_out>; + }; + }; + }; + + out-ports { + port { + aoss_tpda_out: endpoint { + remote-endpoint = <&aoss_funnel_in5>; + }; + }; + }; + }; + + tpdm@11c09000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11c09000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio0_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in0>; + }; + }; + }; + }; + + tpdm@11c0a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11c0a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio1_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in1>; + }; + }; + }; + }; + + tpdm@11c0b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11c0b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio2_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in2>; + }; + }; + }; + }; + + tpdm@11c0c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11c0c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio3_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in3>; + }; + }; + }; + }; + + tpdm@11c0d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x11c0d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + swao_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in5>; + }; + }; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,glymur-smmu-500", + "qcom,smmu-500", + "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + dma-coherent; + }; + + pcie_smmu: iommu@15480000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x15480000 0x0 0x20000>; + interrupts = , + , + ; + interrupt-names = "eventq", "cmdq-sync", "gerror"; + dma-coherent; + #iommu-cells = <1>; + }; + + intc: interrupt-controller@17000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17000000 0x0 0x10000>, + <0x0 0x17080000 0x0 0x480000>; + + interrupts = ; + + #interrupt-cells = <3>; + interrupt-controller; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17040000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x17040000 0x0 0x40000>; + + msi-controller; + #msi-cells = <1>; + }; + }; + + watchdog@17600000 { + compatible = "qcom,apss-wdt-glymur", "qcom,kpss-wdt"; + reg = <0x0 0x17600000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + pdp0_mbox: mailbox@17610000 { + compatible = "qcom,glymur-cpucp-mbox", "qcom,x1e80100-cpucp-mbox"; + reg = <0x0 0x17610000 0 0x8000>, <0 0x19980000 0 0x8000>; + interrupts = ; + #mbox-cells = <1>; + }; + + timer@17810000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17810000 0x0 0x1000>; #address-cells = <2>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x0 0x20000000>; @@ -5865,7 +7117,7 @@ #interconnect-cells = <2>; }; - system-cache-controller@20400000 { + system-cache-controller@21800000 { compatible = "qcom,glymur-llcc"; reg = <0x0 0x21800000 0x0 0x100000>, <0x0 0x21a00000 0x0 0x100000>, @@ -5899,6 +7151,176 @@ interrupts = ; }; + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,glymur-cdsp-pas", "qcom,sm8550-cdsp-pas"; + reg = <0x0 0x32300000 0x0 0x10000>; + + iommus = <&apps_smmu 0x2400 0x400>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP>; + power-domain-names = "cx", + "mxc", + "nsp"; + + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_MPROC_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_MPROC_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + qcom,remote-pid = <5>; + label = "cdsp"; + + fastrpc { + compatible = "qcom,glymur-fastrpc", "qcom,kaanapali-fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + + iommus = <&apps_smmu 0x2401 0x440>, + <&apps_smmu 0x1961 0x0>, + <&apps_smmu 0x19c1 0x0>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + + iommus = <&apps_smmu 0x2402 0x440>, + <&apps_smmu 0x1962 0x0>, + <&apps_smmu 0x19c2 0x0>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + + iommus = <&apps_smmu 0x2403 0x440>, + <&apps_smmu 0x1963 0x0>, + <&apps_smmu 0x19c3 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + + iommus = <&apps_smmu 0x2404 0x440>, + <&apps_smmu 0x1964 0x0>, + <&apps_smmu 0x19c4 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + + iommus = <&apps_smmu 0x2405 0x440>, + <&apps_smmu 0x1965 0x0>, + <&apps_smmu 0x19c5 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + + iommus = <&apps_smmu 0x2406 0x440>, + <&apps_smmu 0x1966 0x0>, + <&apps_smmu 0x19c6 0x0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + + iommus = <&apps_smmu 0x2407 0x440>, + <&apps_smmu 0x1967 0x0>, + <&apps_smmu 0x19c7 0x0>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + + iommus = <&apps_smmu 0x2408 0x440>, + <&apps_smmu 0x1968 0x0>, + <&apps_smmu 0x19c8 0x0>; + dma-coherent; + }; + + /* note: compute-cb@9 is secure */ + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + + iommus = <&apps_smmu 0x240c 0x440>, + <&apps_smmu 0x196c 0x0>, + <&apps_smmu 0x19cc 0x0>; + dma-coherent; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + + iommus = <&apps_smmu 0x240d 0x440>, + <&apps_smmu 0x196d 0x0>, + <&apps_smmu 0x19cd 0x0>; + dma-coherent; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + + iommus = <&apps_smmu 0x240e 0x440>, + <&apps_smmu 0x196e 0x0>, + <&apps_smmu 0x19ce 0x0>; + dma-coherent; + }; + }; + }; + }; + nsp_noc: interconnect@320c0000 { compatible = "qcom,glymur-nsp-noc"; reg = <0x0 0x320c0000 0x0 0x21280>; @@ -5906,7 +7328,19 @@ #interconnect-cells = <2>; }; - imem: sram@81e08000 { + qfprom: efuse@361c8000 { + compatible = "qcom,glymur-qfprom", "qcom,qfprom"; + reg = <0x0 0x361c8000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu-speed-bin@138 { + reg = <0x138 0x2>; + bits = <0 9>; + }; + }; + + imem: sram@81e08600 { compatible = "mmio-sram"; reg = <0x0 0x81e08600 0x0 0x300>; @@ -7124,4 +8558,60 @@ }; }; }; + + tpdm-cdsp-llm { + compatible = "qcom,coresight-static-tpdm"; + qcom,cmb-element-bits = <32>; + + out-ports { + port { + cdsp_llm_tpdm_out: endpoint { + remote-endpoint = <&cdsp_tpda_in1>; + }; + }; + }; + }; + + tpdm-cdsp-llm2 { + compatible = "qcom,coresight-static-tpdm"; + qcom,cmb-element-bits = <32>; + + out-ports { + port { + cdsp_llm2_tpdm_out: endpoint { + remote-endpoint = <&cdsp_tpda_in2>; + }; + }; + }; + }; + + tpdm-cdsp-cmsr { + compatible = "qcom,coresight-static-tpdm"; + + qcom,cmb-element-bits = <32>; + qcom,dsb-element-bits = <32>; + + out-ports { + port { + cdsp_cmsr_tpdm_out: endpoint { + remote-endpoint = <&cdsp_tpda_in3>; + }; + }; + }; + }; + + tpdm-cdsp-cmsr2 { + compatible = "qcom,coresight-static-tpdm"; + + qcom,cmb-element-bits = <32>; + qcom,dsb-element-bits = <32>; + + out-ports { + port { + cdsp_cmsr2_tpdm_out: endpoint { + remote-endpoint = <&cdsp_tpda_in4>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts index 460f27d..c7ba4b3 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts @@ -29,6 +29,14 @@ pinctrl-names = "default"; }; + clocks { + mcp2518fd_osc: clock-40000000 { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + }; + }; + wcd938x: audio-codec { compatible = "qcom,wcd9385-codec"; @@ -1227,6 +1235,19 @@ }; }; +&spi18 { + status = "okay"; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + interrupts-extended = <&tlmm 68 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mcp2518fd_osc>; + spi-max-frequency = <14000000>; + microchip,xstbyen; + }; +}; + &swr0 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi index 051dee0..4ba751a 100644 --- a/arch/arm64/boot/dts/qcom/hamoa.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi @@ -5744,18 +5744,18 @@ mdss_dp0_opp_table: opp-table { compatible = "operating-points-v2"; - opp-162000000 { - opp-hz = /bits/ 64 <162000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - opp-270000000 { opp-hz = /bits/ 64 <270000000>; - required-opps = <&rpmhpd_opp_svs>; + required-opps = <&rpmhpd_opp_low_svs>; }; opp-540000000 { opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-594000000 { + opp-hz = /bits/ 64 <594000000>; required-opps = <&rpmhpd_opp_svs_l1>; }; @@ -5796,7 +5796,7 @@ <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; - operating-points-v2 = <&mdss_dp1_opp_table>; + operating-points-v2 = <&mdss_dp0_opp_table>; power-domains = <&rpmhpd RPMHPD_MMCX>; @@ -5829,30 +5829,6 @@ }; }; }; - - mdss_dp1_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-162000000 { - opp-hz = /bits/ 64 <162000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-270000000 { - opp-hz = /bits/ 64 <270000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-540000000 { - opp-hz = /bits/ 64 <540000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-810000000 { - opp-hz = /bits/ 64 <810000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; }; mdss_dp2: displayport-controller@ae9a000 { @@ -5885,7 +5861,7 @@ <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; - operating-points-v2 = <&mdss_dp2_opp_table>; + operating-points-v2 = <&mdss_dp0_opp_table>; power-domains = <&rpmhpd RPMHPD_MMCX>; @@ -5917,30 +5893,6 @@ }; }; }; - - mdss_dp2_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-162000000 { - opp-hz = /bits/ 64 <162000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-270000000 { - opp-hz = /bits/ 64 <270000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-540000000 { - opp-hz = /bits/ 64 <540000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-810000000 { - opp-hz = /bits/ 64 <810000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; }; mdss_dp3: displayport-controller@aea0000 { @@ -6004,19 +5956,14 @@ mdss_dp3_opp_table: opp-table { compatible = "operating-points-v2"; - opp-162000000 { - opp-hz = /bits/ 64 <162000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - opp-270000000 { opp-hz = /bits/ 64 <270000000>; - required-opps = <&rpmhpd_opp_svs>; + required-opps = <&rpmhpd_opp_low_svs>; }; - opp-540000000 { - opp-hz = /bits/ 64 <540000000>; - required-opps = <&rpmhpd_opp_svs_l1>; + opp-594000000 { + opp-hz = /bits/ 64 <594000000>; + required-opps = <&rpmhpd_opp_svs>; }; opp-810000000 { diff --git a/arch/arm64/boot/dts/qcom/ipq5210.dtsi b/arch/arm64/boot/dts/qcom/ipq5210.dtsi index 3761eb0..2cdc105 100644 --- a/arch/arm64/boot/dts/qcom/ipq5210.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5210.dtsi @@ -236,6 +236,13 @@ }; }; + watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq5210", "qcom,kpss-wdt"; + reg = <0x0 0x0b017000 0x0 0x1000>; + interrupts = ; + clocks = <&sleep_clk>; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0 0x0b120000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi index f20cda4..876bf6a 100644 --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi @@ -639,7 +639,7 @@ status = "disabled"; }; - usb2: usb2@1e00000 { + usb2: usb2@1ef8800 { compatible = "qcom,ipq5424-dwc3", "qcom,dwc3"; reg = <0 0x01ef8800 0 0x400>; #address-cells = <2>; @@ -730,7 +730,7 @@ status = "disabled"; }; - usb3: usb3@8a00000 { + usb3: usb3@8af8800 { compatible = "qcom,ipq5424-dwc3", "qcom,dwc3"; reg = <0 0x08af8800 0 0x400>; diff --git a/arch/arm64/boot/dts/qcom/ipq9650-rdp488.dts b/arch/arm64/boot/dts/qcom/ipq9650-rdp488.dts new file mode 100644 index 0000000..6871f3d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9650-rdp488.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include "ipq9650.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9650 RDP488"; + compatible = "qcom,ipq9650-rdp488", "qcom,ipq9650"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&sdhc { + max-frequency = <192000000>; + bus-width = <4>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + pinctrl-0 = <&sdhc_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + qup_uart1_default_state: qup-uart1-default-state { + pins = "gpio43", "gpio44"; + function = "qup_se6"; + drive-strength = <8>; + bias-pull-down; + }; + + sdhc_default_state: sdhc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; + +&uart1 { + pinctrl-0 = <&qup_uart1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9650.dtsi b/arch/arm64/boot/dts/qcom/ipq9650.dtsi new file mode 100644 index 0000000..3d3b317 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9650.dtsi @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include +#include +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + + l3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + next-level-cache = <&l2_100>; + + l2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + + l2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + + l2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x400>; + enable-method = "psci"; + next-level-cache = <&l2_400>; + + l2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + }; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + scm { + compatible = "qcom,scm-ipq9650", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupts = ; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bootloader@8a100000 { + reg = <0x0 0x8a100000 0x0 0x400000>; + no-map; + }; + + smem@8a500000 { + compatible = "qcom,smem"; + reg = <0x0 0x8a500000 0x0 0x40000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + }; + + tfa@8a600000 { + reg = <0x0 0x8a600000 0x0 0x80000>; + no-map; + }; + + optee@8a680000 { + reg = <0x0 0x8a680000 0x0 0x280000>; + no-map; + }; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0 0 0 0 0x10 0>; + ranges = <0 0 0 0 0x10 0>; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9650-tlmm"; + reg = <0x0 0x01000000 0x0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 54>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq9650-gcc"; + reg = <0x0 0x01800000 0x0 0x40000>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + tcsr_mutex: hwlock@1917000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01917000 0x0 0x57000>; + #hwlock-cells = <1>; + }; + + qupv3: geniqup@1ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x01ac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>, + <&gcc GCC_QUPV3_AHB_SLV_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart1: serial@1a98000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x01a98000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP_SE6_CLK>; + clock-names = "se"; + interrupts = ; + + status = "disabled"; + }; + }; + + sdhc: mmc@7804000 { + compatible = "qcom,ipq9650-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x07804000 0x0 0x1000>, + <0x0 0x07805000 0x0 0x1000>; + reg-names = "hc", + "cqhci"; + + interrupts = , + ; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", + "core", + "xo"; + non-removable; + + status = "disabled"; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f240000 0x0 0xa0000>; + #interrupt-cells = <0x4>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = ; + mbi-ranges = <800 160>; + msi-controller; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4>; + }; + }; + }; + + watchdog@f410000 { + compatible = "qcom,apss-wdt-ipq9650", "qcom,kpss-wdt"; + reg = <0x0 0x0f410000 0x0 0x1000>; + interrupts = ; + clocks = <&sleep_clk>; + }; + + timer@f420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0f420000 0x0 0x1000>; + ranges = <0 0 0 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@f421000 { + reg = <0x0f421000 0x1000>, + <0x0f422000 0x1000>; + interrupts = , + ; + frame-number = <0>; + }; + + frame@f423000 { + reg = <0x0f423000 0x1000>; + interrupts = ; + frame-number = <1>; + + status = "disabled"; + }; + + frame@f425000 { + reg = <0x0f425000 0x1000>, + <0x0f426000 0x1000>; + interrupts = ; + frame-number = <2>; + + status = "disabled"; + }; + + frame@f427000 { + reg = <0x0f427000 0x1000>; + interrupts = ; + frame-number = <3>; + + status = "disabled"; + }; + + frame@f429000 { + reg = <0x0f429000 0x1000>; + interrupts = ; + frame-number = <4>; + + status = "disabled"; + }; + + frame@f42b000 { + reg = <0x0f42b000 0x1000>; + interrupts = ; + frame-number = <5>; + + status = "disabled"; + }; + + frame@f42d000 { + reg = <0x0f42d000 0x1000>; + interrupts = ; + frame-number = <6>; + + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts index 07247dc..f9b5b57 100644 --- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts +++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts @@ -952,6 +952,11 @@ }; }; +&pmih0108_e1_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + &pmh0101_flash { status = "okay"; @@ -1321,3 +1326,25 @@ status = "okay"; }; + +&usb { + dr_mode = "peripheral"; + + status = "okay"; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l4f_0p8>; + vdda12-supply = <&vreg_l1d_1p2>; + + phys = <&pmih0108_e1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l1d_1p2>; + vdda-pll-supply = <&vreg_l4f_0p8>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts index da0e8f9..55d0221 100644 --- a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts +++ b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts @@ -744,6 +744,11 @@ }; }; +&pmih0108_e1_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + &pon_resin { linux,code = ; @@ -816,3 +821,25 @@ status = "okay"; }; + +&usb { + dr_mode = "peripheral"; + + status = "okay"; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l4f_0p8>; + vdda12-supply = <&vreg_l1d_1p2>; + + phys = <&pmih0108_e1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l1d_1p2>; + vdda-pll-supply = <&vreg_l4f_0p8>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi index 7cc326a..7aa9653 100644 --- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi +++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi @@ -2313,10 +2313,10 @@ iommu-map = <0 &apps_smmu 0x1400 0x1>, <0x100 &apps_smmu 0x1401 0x1>; - interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; interrupt-map-mask = <0 0 0 0x7>; #interrupt-cells = <1>; @@ -2538,7 +2538,11 @@ "qcom,inline-crypto-engine"; reg = <0x0 0x01d88000 0x0 0x18000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>; + clock-names = "core", + "iface"; + power-domains = <&gcc GCC_UFS_PHY_GDSC>; }; tcsr_mutex: hwlock@1f40000 { @@ -2634,7 +2638,7 @@ status = "disabled"; - remoteproc_adsp_glink: glink-edge { + glink-edge { interrupts-extended = <&ipcc IPCC_MPROC_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -3138,6 +3142,77 @@ }; }; + usb_hsphy: phy@88e3000 { + compatible = "qcom,kaanapali-m31-eusb2-phy", + "qcom,sm8750-m31-eusb2-phy"; + reg = <0x0 0x88e3000 0x0 0x29c>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,kaanapali-qmp-usb3-dp-phy", + "qcom,sm8750-qmp-usb3-dp-phy"; + reg = <0x0 0x088e8000 0x0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&tcsr TCSR_USB3_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc GCC_USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + }; + }; + }; + }; + camcc: clock-controller@956d000 { compatible = "qcom,kaanapali-camcc"; reg = <0x0 0x0956d000 0x0 0x80000>; @@ -3422,6 +3497,89 @@ #reset-cells = <1>; }; + usb: usb@a600000 { + compatible = "qcom,kaanapali-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre_noc MASTER_USB3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", "apps-usb"; + iommus = <&apps_smmu 0x40 0x0>; + + phys = <&usb_hsphy>, <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + dma-coherent; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,kaanapali-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi index 988ca5f..fa540d8 100644 --- a/arch/arm64/boot/dts/qcom/kodiak.dtsi +++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi @@ -2578,8 +2578,12 @@ ice: crypto@1d88000 { compatible = "qcom,sc7280-inline-crypto-engine", "qcom,inline-crypto-engine"; - reg = <0 0x01d88000 0 0x8000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + reg = <0 0x01d88000 0 0x18000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>; + clock-names = "core", + "iface"; + power-domains = <&gcc GCC_UFS_PHY_GDSC>; }; cryptobam: dma-controller@1dc4000 { @@ -4418,9 +4422,12 @@ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <&gcc GCC_QSPI_CORE_CLK>; clock-names = "iface", "core"; - interconnects = <&gem_noc MASTER_APPSS_PROC 0 - &cnoc2 SLAVE_QSPI_0 0>; - interconnect-names = "qspi-config"; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc2 SLAVE_QSPI_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QSPI_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qspi-config", + "qspi-memory"; power-domains = <&rpmhpd SC7280_CX>; operating-points-v2 = <&qspi_opp_table>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso index 268fc6b..44bd9b1 100644 --- a/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso +++ b/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso @@ -11,6 +11,30 @@ &{/} { model = "Qualcomm Technologies, Inc. Lemans-evk IFP Mezzanine"; + dp2-connector { + compatible = "dp-connector"; + label = "eDP2"; + type = "full-size"; + + port { + dp2_connector_in: endpoint { + remote-endpoint = <&mdss1_dp0_out>; + }; + }; + }; + + dp3-connector { + compatible = "dp-connector"; + label = "eDP3"; + type = "full-size"; + + port { + dp3_connector_in: endpoint { + remote-endpoint = <&mdss1_dp1_out>; + }; + }; + }; + vreg_0p9: regulator-0v9 { compatible = "regulator-fixed"; regulator-name = "VREG_0P9"; @@ -141,6 +165,44 @@ }; }; +&mdss1 { + status = "okay"; +}; + +&mdss1_dp0 { + pinctrl-0 = <&dp2_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss1_dp1 { + pinctrl-0 = <&dp3_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss1_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&dp2_connector_in>; +}; + +&mdss1_dp1_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&dp3_connector_in>; +}; + +&mdss1_dp0_phy { + status = "okay"; +}; + +&mdss1_dp1_phy { + status = "okay"; +}; + &pcie0 { iommu-map = <0x0 &pcie_smmu 0x0 0x1>, <0x100 &pcie_smmu 0x1 0x1>, @@ -235,6 +297,18 @@ }; &tlmm { + dp2_hot_plug_det: dp2-hot-plug-det-state { + pins = "gpio104"; + function = "edp2_hot"; + bias-disable; + }; + + dp3_hot_plug_det: dp3-hot-plug-det-state { + pins = "gpio103"; + function = "edp3_hot"; + bias-disable; + }; + ethernet1_default: ethernet1-default-state { ethernet1-mdc-pins { pins = "gpio20"; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts index c665db6..34dfc8d 100644 --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts @@ -616,6 +616,13 @@ interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&expander3_int>; pinctrl-names = "default"; + + rtss-can-sel-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "rtss-can-sel"; + }; }; eeprom@50 { diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi index 31bd005..40f8849 100644 --- a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi @@ -53,6 +53,16 @@ regulator-max-microvolt = <3000000>; }; + vreg_3p3: vreg-3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_3P3"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_conn_1p8: vreg_conn_1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; @@ -69,6 +79,22 @@ gpio = <&pmm8654au_1_gpios 6 GPIO_ACTIVE_HIGH>; }; + /* + * TODO: These two regulators are actually part of the removable M.2 + * card and not the mainboard. Need to describe this differently. + * Functionally it works correctly, because all we need to do is to + * turn on the actual 3.3V supply above. + */ + vreg_wcn_0p95: vreg-wcn-0p95-regulator { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_3p3>; + }; + wcn6855-pmu { compatible = "qcom,wcn6855-pmu"; @@ -78,6 +104,8 @@ vddio-supply = <&vreg_conn_pa>; vddaon-supply = <&vreg_l2c>; vddpmu-supply = <&vreg_conn_1p8>; + vddpmumx-supply = <&vreg_wcn_0p95>; + vddpmucx-supply = <&vreg_wcn_0p95>; vddrfa0p95-supply = <&vreg_l2c>; vddrfa1p3-supply = <&vreg_l6e>; vddrfa1p9-supply = <&vreg_s5a>; @@ -154,6 +182,30 @@ }; }; + dp2-connector { + compatible = "dp-connector"; + label = "eDP2"; + type = "full-size"; + + port { + dp2_connector_in: endpoint { + remote-endpoint = <&mdss1_dp0_out>; + }; + }; + }; + + dp3-connector { + compatible = "dp-connector"; + label = "eDP3"; + type = "full-size"; + + port { + dp3_connector_in: endpoint { + remote-endpoint = <&mdss1_dp1_out>; + }; + }; + }; + dp-dsi0-connector { compatible = "dp-connector"; label = "DSI0"; @@ -613,6 +665,50 @@ status = "okay"; }; +&mdss1 { + status = "okay"; +}; + +&mdss1_dp0 { + pinctrl-0 = <&dp2_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss1_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&dp2_connector_in>; +}; + +&mdss1_dp0_phy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&mdss1_dp1 { + pinctrl-0 = <&dp3_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss1_dp1_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&dp3_connector_in>; +}; + +&mdss1_dp1_phy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l4a>; + + status = "okay"; +}; + &pmm8654au_0_gpios { gpio-line-names = "DS_EN", "POFF_COMPLETE", @@ -790,6 +886,18 @@ bias-disable; }; + dp2_hot_plug_det: dp2-hot-plug-det-state { + pins = "gpio104"; + function = "edp2_hot"; + bias-disable; + }; + + dp3_hot_plug_det: dp3-hot-plug-det-state { + pins = "gpio103"; + function = "edp3_hot"; + bias-disable; + }; + io_expander_intr_active: io-expander-intr-active-state { pins = "gpio98"; function = "gpio"; @@ -956,6 +1064,8 @@ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; }; }; diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi index fe6e763..353a6e6 100644 --- a/arch/arm64/boot/dts/qcom/lemans.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi @@ -2694,6 +2694,352 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + pcie0: pcie@1c00000 { + compatible = "qcom,pcie-sa8775p"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf20>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x4000>, + <0x0 0x40100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <0>; + num-lanes = <2>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; + + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, + <0x100 &pcie_smmu 0x0001 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>, + <&gcc GCC_PCIE_0_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55>; + + status = "disabled"; + + pcieport0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie0_ep: pcie-ep@1c00000 { + compatible = "qcom,sa8775p-pcie-ep"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf20>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x4000>, + <0x0 0x40200000 0x0 0x1fe00000>, + <0x0 0x01c03000 0x0 0x1000>, + <0x0 0x40005000 0x0 0x2000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio", "dma"; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; + + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + interrupts = , + , + ; + + interrupt-names = "global", "doorbell", "dma"; + + interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + dma-coherent; + iommus = <&pcie_smmu 0x0000 0x7f>; + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_0_GDSC>; + phys = <&pcie0_phy>; + phy-names = "pciephy"; + num-lanes = <2>; + linux,pci-domain = <0>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c04000 { + compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy"; + reg = <0x0 0x1c04000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pcie@1c10000 { + compatible = "qcom,pcie-sa8775p"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x60000000 0x0 0xf20>, + <0x0 0x60000f20 0x0 0xa8>, + <0x0 0x60001000 0x0 0x4000>, + <0x0 0x60100000 0x0 0x100000>, + <0x0 0x01c13000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <1>; + num-lanes = <4>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; + + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &pcie_smmu 0x0080 0x1>, + <0x100 &pcie_smmu 0x0081 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>; + + status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie1_ep: pcie-ep@1c10000 { + compatible = "qcom,sa8775p-pcie-ep"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x60000000 0x0 0xf20>, + <0x0 0x60000f20 0x0 0xa8>, + <0x0 0x60001000 0x0 0x4000>, + <0x0 0x60200000 0x0 0x1fe00000>, + <0x0 0x01c13000 0x0 0x1000>, + <0x0 0x60005000 0x0 0x2000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio", "dma"; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; + + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + interrupts = , + , + ; + + interrupt-names = "global", "doorbell", "dma"; + + interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + dma-coherent; + iommus = <&pcie_smmu 0x80 0x7f>; + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_1_GDSC>; + phys = <&pcie1_phy>; + phy-names = "pciephy"; + num-lanes = <4>; + linux,pci-domain = <1>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c14000 { + compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy"; + reg = <0x0 0x1c14000 0x0 0x4000>; + + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0x0 0x01d84000 0x0 0x3000>; @@ -2758,7 +3104,11 @@ compatible = "qcom,sa8775p-inline-crypto-engine", "qcom,inline-crypto-engine"; reg = <0x0 0x01d88000 0x0 0x18000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>; + clock-names = "core", + "iface"; + power-domains = <&gcc UFS_PHY_GDSC>; }; cryptobam: dma-controller@1dc4000 { @@ -5308,9 +5658,11 @@ <0x0 0x0aec2000 0x0 0x1c8>; clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, - <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>; + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_EDP_REF_CLKREF_EN>; clock-names = "aux", - "cfg_ahb"; + "cfg_ahb", + "ref"; #clock-cells = <1>; #phy-cells = <0>; @@ -5327,9 +5679,11 @@ <0x0 0x0aec5000 0x0 0x1c8>; clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>, - <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>; + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_EDP_REF_CLKREF_EN>; clock-names = "aux", - "cfg_ahb"; + "cfg_ahb", + "ref"; #clock-cells = <1>; #phy-cells = <0>; @@ -5470,7 +5824,7 @@ phys = <&mdss0_dp1_phy>; phy-names = "dp"; - operating-points-v2 = <&dp1_opp_table>; + operating-points-v2 = <&dp_opp_table>; power-domains = <&rpmhpd SA8775P_MMCX>; #sound-dai-cells = <0>; @@ -5495,30 +5849,6 @@ mdss0_dp1_out: endpoint { }; }; }; - - dp1_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-162000000 { - opp-hz = /bits/ 64 <162000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-270000000 { - opp-hz = /bits/ 64 <270000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-540000000 { - opp-hz = /bits/ 64 <540000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-810000000 { - opp-hz = /bits/ 64 <810000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; }; }; @@ -7051,6 +7381,265 @@ }; }; + mdss1: display-subsystem@22000000 { + compatible = "qcom,sa8775p-mdss"; + reg = <0x0 0x22000000 0x0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_CORE1_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&mmss_noc MASTER_MDP_CORE1_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + resets = <&dispcc1 MDSS_DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc1 MDSS_DISP_CC_MDSS_CORE_GDSC>; + + clocks = <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP1_HF_AXI_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_MDP_CLK>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1800 0x402>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + display-controller@22001000 { + compatible = "qcom,sa8775p-dpu"; + reg = <0x0 0x22001000 0x0 0x8f000>, + <0x0 0x220b0000 0x0 0x3000>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP1_HF_AXI_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_MDP_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc1 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdss0_mdp_opp_table>; + power-domains = <&rpmhpd SA8775P_MMCX>; + + interrupt-parent = <&mdss1>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu1_intf0_out: endpoint { + remote-endpoint = <&mdss1_dp0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpu1_intf4_out: endpoint { + remote-endpoint = <&mdss1_dp1_in>; + }; + }; + }; + }; + + mdss1_dp0_phy: phy@220c2a00 { + compatible = "qcom,sa8775p-edp-phy"; + reg = <0x0 0x220c2a00 0x0 0x200>, + <0x0 0x220c2200 0x0 0xd0>, + <0x0 0x220c2600 0x0 0xd0>, + <0x0 0x220c2000 0x0 0x1c8>; + + clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_EDP_REF_CLKREF_EN>; + clock-names = "aux", + "cfg_ahb", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss1_dp1_phy: phy@220c5a00 { + compatible = "qcom,sa8775p-edp-phy"; + reg = <0x0 0x220c5a00 0x0 0x200>, + <0x0 0x220c5200 0x0 0xd0>, + <0x0 0x220c5600 0x0 0xd0>, + <0x0 0x220c5000 0x0 0x1c8>; + + clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_EDP_REF_CLKREF_EN>; + clock-names = "aux", + "cfg_ahb", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss1_dp0: displayport-controller@22154000 { + compatible = "qcom,sa8775p-dp"; + reg = <0x0 0x22154000 0x0 0x104>, + <0x0 0x22154200 0x0 0x0c0>, + <0x0 0x22155000 0x0 0x770>, + <0x0 0x22156000 0x0 0x09c>, + <0x0 0x22157000 0x0 0x09c>, + <0x0 0x22158000 0x0 0x09c>, + <0x0 0x22159000 0x0 0x09c>, + <0x0 0x2215a000 0x0 0x23c>, + <0x0 0x2215b000 0x0 0x23c>; + + interrupt-parent = <&mdss1>; + interrupts = <12>; + + clocks = <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel", + "stream_2_pixel", + "stream_3_pixel"; + assigned-clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp0_phy 0>, + <&mdss1_dp0_phy 1>, + <&mdss1_dp0_phy 1>, + <&mdss1_dp0_phy 1>, + <&mdss1_dp0_phy 1>; + phys = <&mdss1_dp0_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SA8775P_MMCX>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss1_dp0_in: endpoint { + remote-endpoint = <&dpu1_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss1_dp0_out: endpoint { }; + }; + }; + }; + + mdss1_dp1: displayport-controller@2215c000 { + compatible = "qcom,sa8775p-dp"; + reg = <0x0 0x2215c000 0x0 0x104>, + <0x0 0x2215c200 0x0 0x0c0>, + <0x0 0x2215d000 0x0 0x770>, + <0x0 0x2215e000 0x0 0x09c>, + <0x0 0x2215f000 0x0 0x09c>, + <0x0 0x22160000 0x0 0x09c>, + <0x0 0x22161000 0x0 0x09c>, + <0x0 0x22162000 0x0 0x23c>, + <0x0 0x22163000 0x0 0x23c>; + + interrupt-parent = <&mdss1>; + interrupts = <13>; + + clocks = <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + assigned-clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>, + <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp1_phy 0>, + <&mdss1_dp1_phy 1>, + <&mdss1_dp1_phy 1>; + phys = <&mdss1_dp1_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SA8775P_MMCX>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss1_dp1_in: endpoint { + remote-endpoint = <&dpu1_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss1_dp1_out: endpoint { }; + }; + }; + + }; + }; + dispcc1: clock-controller@22100000 { compatible = "qcom,sa8775p-dispcc1"; reg = <0x0 0x22100000 0x0 0x20000>; @@ -7058,13 +7647,13 @@ <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <0>, <0>, <0>, <0>, + <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>, + <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>, <0>, <0>, <0>, <0>; power-domains = <&rpmhpd SA8775P_MMCX>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - status = "disabled"; }; ethernet1: ethernet@23000000 { @@ -7483,7 +8072,7 @@ status = "disabled"; - remoteproc_adsp_glink: glink-edge { + glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -8601,350 +9190,4 @@ }; }; }; - - pcie0: pcie@1c00000 { - compatible = "qcom,pcie-sa8775p"; - reg = <0x0 0x01c00000 0x0 0x3000>, - <0x0 0x40000000 0x0 0xf20>, - <0x0 0x40000f20 0x0 0xa8>, - <0x0 0x40001000 0x0 0x4000>, - <0x0 0x40100000 0x0 0x100000>, - <0x0 0x01c03000 0x0 0x1000>; - reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - bus-range = <0x00 0xff>; - - dma-coherent; - - linux,pci-domain = <0>; - num-lanes = <2>; - - interrupts = , - , - , - , - , - , - , - , - ; - interrupt-names = "msi0", - "msi1", - "msi2", - "msi3", - "msi4", - "msi5", - "msi6", - "msi7", - "global"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; - - clock-names = "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a"; - - assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; - assigned-clock-rates = <19200000>; - - interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; - interconnect-names = "pcie-mem", "cpu-pcie"; - - iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, - <0x100 &pcie_smmu 0x0001 0x1>; - - resets = <&gcc GCC_PCIE_0_BCR>, - <&gcc GCC_PCIE_0_LINK_DOWN_BCR>; - reset-names = "pci", - "link_down"; - - power-domains = <&gcc PCIE_0_GDSC>; - - phys = <&pcie0_phy>; - phy-names = "pciephy"; - - eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; - eq-presets-16gts = /bits/ 8 <0x55 0x55>; - - status = "disabled"; - - pcieport0: pcie@0 { - device_type = "pci"; - reg = <0x0 0x0 0x0 0x0 0x0>; - bus-range = <0x01 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - ranges; - }; - }; - - pcie0_ep: pcie-ep@1c00000 { - compatible = "qcom,sa8775p-pcie-ep"; - reg = <0x0 0x01c00000 0x0 0x3000>, - <0x0 0x40000000 0x0 0xf20>, - <0x0 0x40000f20 0x0 0xa8>, - <0x0 0x40001000 0x0 0x4000>, - <0x0 0x40200000 0x0 0x1fe00000>, - <0x0 0x01c03000 0x0 0x1000>, - <0x0 0x40005000 0x0 0x2000>; - reg-names = "parf", "dbi", "elbi", "atu", "addr_space", - "mmio", "dma"; - - clocks = <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; - - clock-names = "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a"; - - interrupts = , - , - ; - - interrupt-names = "global", "doorbell", "dma"; - - interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; - interconnect-names = "pcie-mem", "cpu-pcie"; - - dma-coherent; - iommus = <&pcie_smmu 0x0000 0x7f>; - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "core"; - power-domains = <&gcc PCIE_0_GDSC>; - phys = <&pcie0_phy>; - phy-names = "pciephy"; - num-lanes = <2>; - linux,pci-domain = <0>; - - status = "disabled"; - }; - - pcie0_phy: phy@1c04000 { - compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy"; - reg = <0x0 0x1c04000 0x0 0x2000>; - - clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_EN>, - <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, - <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_PIPEDIV2_CLK>; - clock-names = "aux", - "cfg_ahb", - "ref", - "rchng", - "pipe", - "pipediv2"; - - assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; - assigned-clock-rates = <100000000>; - - resets = <&gcc GCC_PCIE_0_PHY_BCR>; - reset-names = "phy"; - - #clock-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - - #phy-cells = <0>; - - status = "disabled"; - }; - - pcie1: pcie@1c10000 { - compatible = "qcom,pcie-sa8775p"; - reg = <0x0 0x01c10000 0x0 0x3000>, - <0x0 0x60000000 0x0 0xf20>, - <0x0 0x60000f20 0x0 0xa8>, - <0x0 0x60001000 0x0 0x4000>, - <0x0 0x60100000 0x0 0x100000>, - <0x0 0x01c13000 0x0 0x1000>; - reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>; - bus-range = <0x00 0xff>; - - dma-coherent; - - linux,pci-domain = <1>; - num-lanes = <4>; - - interrupts = , - , - , - , - , - , - , - , - ; - interrupt-names = "msi0", - "msi1", - "msi2", - "msi3", - "msi4", - "msi5", - "msi6", - "msi7", - "global"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&gcc GCC_PCIE_1_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; - - clock-names = "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a"; - - assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; - assigned-clock-rates = <19200000>; - - interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>; - interconnect-names = "pcie-mem", "cpu-pcie"; - - iommu-map = <0x0 &pcie_smmu 0x0080 0x1>, - <0x100 &pcie_smmu 0x0081 0x1>; - - resets = <&gcc GCC_PCIE_1_BCR>, - <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; - reset-names = "pci", - "link_down"; - - power-domains = <&gcc PCIE_1_GDSC>; - - phys = <&pcie1_phy>; - phy-names = "pciephy"; - - eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>; - eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>; - - status = "disabled"; - - pcie@0 { - device_type = "pci"; - reg = <0x0 0x0 0x0 0x0 0x0>; - bus-range = <0x01 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - ranges; - }; - }; - - pcie1_ep: pcie-ep@1c10000 { - compatible = "qcom,sa8775p-pcie-ep"; - reg = <0x0 0x01c10000 0x0 0x3000>, - <0x0 0x60000000 0x0 0xf20>, - <0x0 0x60000f20 0x0 0xa8>, - <0x0 0x60001000 0x0 0x4000>, - <0x0 0x60200000 0x0 0x1fe00000>, - <0x0 0x01c13000 0x0 0x1000>, - <0x0 0x60005000 0x0 0x2000>; - reg-names = "parf", "dbi", "elbi", "atu", "addr_space", - "mmio", "dma"; - - clocks = <&gcc GCC_PCIE_1_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; - - clock-names = "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a"; - - interrupts = , - , - ; - - interrupt-names = "global", "doorbell", "dma"; - - interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>; - interconnect-names = "pcie-mem", "cpu-pcie"; - - dma-coherent; - iommus = <&pcie_smmu 0x80 0x7f>; - resets = <&gcc GCC_PCIE_1_BCR>; - reset-names = "core"; - power-domains = <&gcc PCIE_1_GDSC>; - phys = <&pcie1_phy>; - phy-names = "pciephy"; - num-lanes = <4>; - linux,pci-domain = <1>; - - status = "disabled"; - }; - - pcie1_phy: phy@1c14000 { - compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy"; - reg = <0x0 0x1c14000 0x0 0x4000>; - - clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_EN>, - <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, - <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_PIPEDIV2_CLK>; - clock-names = "aux", - "cfg_ahb", - "ref", - "rchng", - "pipe", - "pipediv2"; - - assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; - assigned-clock-rates = <100000000>; - - resets = <&gcc GCC_PCIE_1_PHY_BCR>; - reset-names = "phy"; - - #clock-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - - #phy-cells = <0>; - - status = "disabled"; - }; }; diff --git a/arch/arm64/boot/dts/qcom/mahua.dtsi b/arch/arm64/boot/dts/qcom/mahua.dtsi index 990a02c..22822b6 100644 --- a/arch/arm64/boot/dts/qcom/mahua.dtsi +++ b/arch/arm64/boot/dts/qcom/mahua.dtsi @@ -21,6 +21,7 @@ /delete-node/ &cpu_pd15; /delete-node/ &cpu_pd16; /delete-node/ &cpu_pd17; +/delete-node/ &cti_wpss; /delete-node/ &thermal_aoss_6; /delete-node/ &thermal_aoss_7; /delete-node/ &thermal_cpu_2_0_0; diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts index c1899db..ebdca0e 100644 --- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts +++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts @@ -687,7 +687,17 @@ }; /* VL53L3 ToF @ 0x29 */ - /* AW86938FCR vibrator @ 0x5a */ + + vibrator@5a { + compatible = "awinic,aw86938", "awinic,aw86927"; + reg = <0x5a>; + + interrupts-extended = <&tlmm 80 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&aw86938_int_default>, <&aw86938_reset_default>; + pinctrl-names = "default"; + }; }; &pm8550vs_c { @@ -786,6 +796,11 @@ status = "okay"; }; +&rmtfs_mem { + /* Increase the size from 2.5 MiB to 6 MiB */ + reg = <0x0 0xe1f00000 0x0 0x600000>; +}; + &sdhc_2 { cd-gpios = <&tlmm 65 GPIO_ACTIVE_HIGH>; @@ -824,6 +839,20 @@ bias-disable; }; + aw86938_reset_default: aw86938-reset-default-state { + pins = "gpio78"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + aw86938_int_default: aw86938-int-default-state { + pins = "gpio80"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + pm8008_int_default: pm8008-int-default-state { pins = "gpio125"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts b/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts new file mode 100644 index 0000000..7393978 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts @@ -0,0 +1,964 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#define PMIV0104_SID 7 + +#include +#include +#include + +#include "milos.dtsi" +#include "pm7550.dtsi" +#include "pm8550vs.dtsi" +#include "pmiv0104.dtsi" /* PMIV0102 */ +#include "pmk8550.dtsi" /* PMK7635 */ +#include "pmr735b.dtsi" + +/ { + model = "Nothing Phone (3a)"; + compatible = "nothing,asteroids", "qcom,milos"; + chassis-type = "handset"; + + aliases { + serial0 = &uart5; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@e3940000 { + compatible = "simple-framebuffer"; + reg = <0x0 0xe3940000 0x0 (2392 * 1080 * 4)>; + width = <1080>; + height = <2392>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + panel = <&panel>; + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + + /* Dummy panel for simple-framebuffer dimension info */ + panel: dummy-panel { + compatible = "boe,bf068mwm-td0"; + height-mm = <157>; + width-mm = <71>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&assist_default>, <&volume_up_default>; + pinctrl-names = "default"; + + key-assist { + gpios = <&tlmm 71 GPIO_ACTIVE_LOW>; + label = "Assistant"; + linux,code = ; + }; + + key-volume-up { + gpios = <&pm7550_gpios 6 GPIO_ACTIVE_LOW>; + label = "Volume Up"; + linux,code = ; + }; + }; + + pmic-glink { + compatible = "qcom,milos-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 131 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + data-role = "dual"; + power-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@81f20000 { + compatible = "ramoops"; + reg = <0x0 0x81f20000 0x0 0x400000>; + console-size = <0x200000>; + mem-type = <2>; + pmsg-size = <0x200000>; + }; + + /* + * ABL is powering down display and controller if this node is + * not named exactly "splash_region". + */ + splash_region@e3940000 { + reg = <0x0 0xe3940000 0x0 0x2b00000>; + no-map; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7550-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1b>; + vdd-l2-l3-supply = <&vreg_s3b>; + vdd-l4-l5-supply = <&vreg_s2b>; + vdd-l7-supply = <&vreg_s1b>; + vdd-l8-supply = <&vreg_s1b>; + vdd-l9-l10-supply = <&vreg_s1b>; + vdd-l11-supply = <&vreg_s1b>; + vdd-l12-l14-supply = <&vreg_bob>; + vdd-l13-l16-supply = <&vreg_bob>; + vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply = <&vreg_bob>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-bob-supply = <&vph_pwr>; + + qcom,pmic-id = "b"; + + vreg_s1b: smps1 { + regulator-name = "vreg_s1b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2080000>; + regulator-initial-mode = ; + }; + + vreg_s2b: smps2 { + regulator-name = "vreg_s2b"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1408000>; + regulator-initial-mode = ; + }; + + vreg_s3b: smps3 { + regulator-name = "vreg_s3b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <1040000>; + regulator-initial-mode = ; + }; + + vreg_s4b: smps4 { + regulator-name = "vreg_s4b"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = ; + }; + + vreg_l1b: ldo1 { + regulator-name = "vreg_l1b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2b: ldo2 { + regulator-name = "vreg_l2b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l5b: ldo5 { + regulator-name = "vreg_l5b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7b: ldo7 { + regulator-name = "vreg_l7b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8b: ldo8 { + regulator-name = "vreg_l8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9b: ldo9 { + regulator-name = "vreg_l9b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l10b: ldo10 { + regulator-name = "vreg_l10b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l11b: ldo11 { + regulator-name = "vreg_l11b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12b: ldo12 { + regulator-name = "vreg_l12b"; + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = ; + }; + + vreg_l13b: ldo13 { + regulator-name = "vreg_l13b"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l14b: ldo14 { + regulator-name = "vreg_l14b"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l15b: ldo15 { + regulator-name = "vreg_l15b"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l16b: ldo16 { + regulator-name = "vreg_l16b"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l17b: ldo17 { + regulator-name = "vreg_l17b"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l18b: ldo18 { + regulator-name = "vreg_l18b"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l19b: ldo19 { + regulator-name = "vreg_l19b"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l20b: ldo20 { + regulator-name = "vreg_l20b"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l21b: ldo21 { + regulator-name = "vreg_l21b"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l22b: ldo22 { + regulator-name = "vreg_l22b"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = ; + }; + + vreg_l23b: ldo23 { + regulator-name = "vreg_l23b"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3b>; + vdd-l2-supply = <&vreg_s3b>; + vdd-l3-supply = <&vreg_s3b>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s3c: smps3 { + regulator-name = "vreg_s3c"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = ; + }; + + vreg_s4c: smps4 { + regulator-name = "vreg_s4c"; + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <812000>; + regulator-initial-mode = ; + }; + + vreg_s5c: smps5 { + regulator-name = "vreg_s5c"; + regulator-min-microvolt = <540000>; + regulator-max-microvolt = <884000>; + regulator-initial-mode = ; + }; + + vreg_s6c: smps6 { + regulator-name = "vreg_s6c"; + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = ; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <650000>; + regulator-initial-mode = ; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pmr735b-rpmh-regulators"; + + vdd-l1-l2-supply = <&vreg_s3b>; + vdd-l3-supply = <&vreg_s3b>; + vdd-l4-supply = <&vreg_s1b>; + vdd-l5-supply = <&vreg_s2b>; + vdd-l7-l8-supply = <&vreg_s2b>; + vdd-l9-supply = <&vreg_s3b>; + vdd-l10-supply = <&vreg_s1b>; + vdd-l11-supply = <&vreg_s3b>; + vdd-l12-supply = <&vreg_s3b>; + + qcom,pmic-id = "f"; + + vreg_l1f: ldo1 { + regulator-name = "vreg_l1f"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = ; + }; + + vreg_l2f: ldo2 { + regulator-name = "vreg_l2f"; + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = ; + }; + + vreg_l3f: ldo3 { + regulator-name = "vreg_l3f"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l4f: ldo4 { + regulator-name = "vreg_l4f"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = ; + }; + + vreg_l5f: ldo5 { + regulator-name = "vreg_l5f"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = ; + }; + + vreg_l7f: ldo7 { + regulator-name = "vreg_l7f"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = ; + }; + + vreg_l9f: ldo9 { + regulator-name = "vreg_l9f"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = ; + }; + + vreg_l10f: ldo10 { + regulator-name = "vreg_l10f"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l11f: ldo11 { + regulator-name = "vreg_l11f"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <864000>; + regulator-initial-mode = ; + }; + + vreg_l12f: ldo12 { + regulator-name = "vreg_l12f"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <884000>; + regulator-initial-mode = ; + }; + }; +}; + +&dispcc { + /* Disable for now so simple-framebuffer continues working */ + status = "disabled"; +}; + +&gcc { + protected-clocks = , , + , , + , , + , , + , , + , ; +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + led-controller@3a { + compatible = "awinic,aw20036"; + reg = <0x3a>; + #address-cells = <1>; + #size-cells = <0>; + + enable-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + led@0 { + reg = <0x0>; + color = ; + function = "glyph-1"; + function-enumerator = <0>; + led-max-microamp = <6560>; + }; + + led@1 { + reg = <0x1>; + color = ; + function = "glyph-1"; + function-enumerator = <1>; + led-max-microamp = <6560>; + }; + + led@2 { + reg = <0x2>; + color = ; + function = "glyph-1"; + function-enumerator = <2>; + led-max-microamp = <6560>; + }; + + led@3 { + reg = <0x3>; + color = ; + function = "glyph-1"; + function-enumerator = <3>; + led-max-microamp = <6560>; + }; + + led@4 { + reg = <0x4>; + color = ; + function = "glyph-1"; + function-enumerator = <4>; + led-max-microamp = <6560>; + }; + + led@5 { + reg = <0x5>; + color = ; + function = "glyph-1"; + function-enumerator = <5>; + led-max-microamp = <6560>; + }; + + led@6 { + reg = <0x6>; + color = ; + function = "glyph-1"; + function-enumerator = <6>; + led-max-microamp = <6560>; + }; + + led@7 { + reg = <0x7>; + color = ; + function = "glyph-2"; + function-enumerator = <0>; + led-max-microamp = <6560>; + }; + + led@8 { + reg = <0x8>; + color = ; + function = "glyph-3"; + function-enumerator = <0>; + led-max-microamp = <6560>; + }; + + led@9 { + reg = <0x9>; + color = ; + function = "glyph-3"; + function-enumerator = <1>; + led-max-microamp = <6560>; + }; + + led@a { + reg = <0xa>; + color = ; + function = "glyph-3"; + function-enumerator = <2>; + led-max-microamp = <6560>; + }; + + led@b { + reg = <0xb>; + color = ; + function = "glyph-3"; + function-enumerator = <3>; + led-max-microamp = <6560>; + }; + + led@c { + reg = <0xc>; + color = ; + function = "glyph-1"; + function-enumerator = <7>; + led-max-microamp = <6560>; + }; + + led@d { + reg = <0xd>; + color = ; + function = "glyph-1"; + function-enumerator = <8>; + led-max-microamp = <6560>; + }; + + led@e { + reg = <0xe>; + color = ; + function = "glyph-1"; + function-enumerator = <9>; + led-max-microamp = <6560>; + }; + + led@f { + reg = <0xf>; + color = ; + function = "glyph-1"; + function-enumerator = <10>; + led-max-microamp = <6560>; + }; + + led@10 { + reg = <0x10>; + color = ; + function = "glyph-1"; + function-enumerator = <11>; + led-max-microamp = <6560>; + }; + + led@11 { + reg = <0x11>; + color = ; + function = "glyph-1"; + function-enumerator = <12>; + led-max-microamp = <6560>; + }; + + led@12 { + reg = <0x12>; + color = ; + function = "glyph-1"; + function-enumerator = <13>; + led-max-microamp = <6560>; + }; + + led@13 { + reg = <0x13>; + color = ; + function = "glyph-2"; + function-enumerator = <1>; + led-max-microamp = <6560>; + }; + + led@14 { + reg = <0x14>; + color = ; + function = "glyph-2"; + function-enumerator = <2>; + led-max-microamp = <6560>; + }; + + led@15 { + reg = <0x15>; + color = ; + function = "glyph-3"; + function-enumerator = <4>; + led-max-microamp = <6560>; + }; + + led@16 { + reg = <0x16>; + color = ; + function = "glyph-3"; + function-enumerator = <5>; + led-max-microamp = <6560>; + }; + + led@17 { + reg = <0x17>; + color = ; + function = "glyph-3"; + function-enumerator = <6>; + led-max-microamp = <6560>; + }; + + led@18 { + reg = <0x18>; + color = ; + function = "glyph-1"; + function-enumerator = <14>; + led-max-microamp = <6560>; + }; + + led@19 { + reg = <0x19>; + color = ; + function = "glyph-1"; + function-enumerator = <15>; + led-max-microamp = <6560>; + }; + + led@1a { + reg = <0x1a>; + color = ; + function = "glyph-1"; + function-enumerator = <16>; + led-max-microamp = <6560>; + }; + + led@1b { + reg = <0x1b>; + color = ; + function = "glyph-1"; + function-enumerator = <17>; + led-max-microamp = <6560>; + }; + + led@1c { + reg = <0x1c>; + color = ; + function = "glyph-1"; + function-enumerator = <18>; + led-max-microamp = <6560>; + }; + + led@1d { + reg = <0x1d>; + color = ; + function = "glyph-1"; + function-enumerator = <19>; + led-max-microamp = <6560>; + }; + + led@1e { + reg = <0x1e>; + color = ; + function = "glyph-2"; + function-enumerator = <3>; + led-max-microamp = <6560>; + }; + + led@1f { + reg = <0x1f>; + color = ; + function = "glyph-2"; + function-enumerator = <4>; + led-max-microamp = <6560>; + }; + + led@20 { + reg = <0x20>; + color = ; + function = "glyph-3"; + function-enumerator = <7>; + led-max-microamp = <6560>; + }; + + led@21 { + reg = <0x21>; + color = ; + function = "glyph-3"; + function-enumerator = <8>; + led-max-microamp = <6560>; + }; + + led@22 { + reg = <0x22>; + color = ; + function = "glyph-3"; + function-enumerator = <9>; + led-max-microamp = <6560>; + }; + + led@23 { + reg = <0x23>; + color = ; + function = "glyph-3"; + function-enumerator = <10>; + led-max-microamp = <6560>; + }; + }; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + vcc-supply = <&vph_pwr>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; +}; + +&pm7550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <1>, <4>; + led-max-microamp = <350000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <400000>; + }; +}; + +&pm7550_gpios { + volume_up_default: volume-up-default-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <1>; + bias-pull-up; + }; +}; + +&pm8550vs_c { + status = "okay"; +}; + +&pmiv0104_eusb2_repeater { + vdd18-supply = <&vreg_l7b>; + vdd3-supply = <&vreg_l17b>; + + qcom,tune-res-fsdif = /bits/ 8 <0x5>; + qcom,tune-usb2-amplitude = /bits/ 8 <0x8>; + qcom,tune-usb2-disc-thres = /bits/ 8 <0x7>; + qcom,tune-usb2-preem = /bits/ 8 <0x6>; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/milos/nothing/asteroids/adsp.mbn", + "qcom/milos/nothing/asteroids/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/milos/nothing/asteroids/cdsp.mbn", + "qcom/milos/nothing/asteroids/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/milos/nothing/asteroids/modem.mbn"; + + status = "okay"; +}; + +&remoteproc_wpss { + firmware-name = "qcom/milos/nothing/asteroids/wpss.mbn"; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <13 1>, /* Display */ + <63 2>; /* WLAN UART */ + + assist_default: assist-default-state { + pins = "gpio71"; + function = "gpio"; + bias-pull-up; + }; +}; + +&trusted_apps_mem { + reg = <0x0 0xe9500000 0x0 0x5500000>; +}; + +/* + * UART_RX and UART_TX are routed to test points on board, not + * available over USB. + */ +&uart5 { + status = "okay"; +}; + +&usb_1 { + /* USB 2.0 only, HW does not support USB 3.x */ + qcom,select-utmi-as-pipe-clk; + + status = "okay"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l2b>; + vdda12-supply = <&vreg_l4b>; + + phys = <&pmiv0104_eusb2_repeater>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi b/arch/arm64/boot/dts/qcom/milos.dtsi index a6e463f..8c92329 100644 --- a/arch/arm64/boot/dts/qcom/milos.dtsi +++ b/arch/arm64/boot/dts/qcom/milos.dtsi @@ -642,7 +642,7 @@ rmtfs_mem: rmtfs@e1f00000 { compatible = "qcom,rmtfs-mem"; - reg = <0x0 0xe1f00000 0x0 0x600000>; + reg = <0x0 0xe1f00000 0x0 0x280000>; no-map; qcom,client-id = <1>; @@ -1282,6 +1282,38 @@ power-domains = <&gcc UFS_PHY_GDSC>; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x28000>; + + interrupts = ; + + #dma-cells = <1>; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + + qcom,ee = <0>; + qcom,num-ees = <4>; + num-channels = <20>; + qcom,controlled-remotely; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,milos-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; @@ -1299,6 +1331,18 @@ #reset-cells = <1>; }; + qfprom: efuse@221c8000 { + compatible = "qcom,milos-qfprom", "qcom,qfprom"; + reg = <0x0 0x221c8000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu-speed-bin@138 { + reg = <0x138 0x2>; + bits = <0 9>; + }; + }; + remoteproc_adsp: remoteproc@3000000 { compatible = "qcom,milos-adsp-pas"; reg = <0x0 0x03000000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts index ca14f0e..379b796 100644 --- a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts +++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts @@ -21,6 +21,7 @@ ethernet0 = ðernet0; i2c1 = &i2c1; serial0 = &uart7; + serial1 = &uart10; }; chosen { @@ -454,6 +455,16 @@ status = "okay"; }; +&uart10 { + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,qca2066-bt"; + enable-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>; + clocks = <&sleep_clk>; + }; +}; + &usb_1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi index 7b1d574..e4c8466 100644 --- a/arch/arm64/boot/dts/qcom/monaco.dtsi +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi @@ -2737,7 +2737,11 @@ compatible = "qcom,qcs8300-inline-crypto-engine", "qcom,inline-crypto-engine"; reg = <0x0 0x01d88000 0x0 0x18000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>; + clock-names = "core", + "iface"; + power-domains = <&gcc GCC_UFS_PHY_GDSC>; }; crypto: crypto@1dfa000 { @@ -2795,7 +2799,7 @@ status = "disabled"; - remoteproc_adsp_glink: glink-edge { + glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -7615,6 +7619,35 @@ label = "gpdsp"; qcom,remote-pid = <17>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "gdsp0"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x28a1 0x0>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x28a2 0x0>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x28a3 0x0>; + dma-coherent; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index d41b5c4..3477060 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -955,10 +955,10 @@ "msi7", "global"; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_AUX_CLK>, diff --git a/arch/arm64/boot/dts/qcom/pm7550ba-eliza.dtsi b/arch/arm64/boot/dts/qcom/pm7550ba-eliza.dtsi new file mode 100644 index 0000000..1869289 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm7550ba-eliza.dtsi @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2026 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include + +/ { + thermal-zones { + pm7550ba-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm7550ba_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus0 { + pm7550ba: pmic@7 { + compatible = "qcom,pm7550ba", "qcom,spmi-pmic"; + reg = <7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm7550ba_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm7550ba_gpios: gpio@8800 { + compatible = "qcom,pm7550ba-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm7550ba_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm7550ba_eusb2_repeater: phy@fd00 { + compatible = "qcom,pm7550ba-eusb2-repeater", + "qcom,pm8550b-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi b/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi index 7a1e5f3..6b47470 100644 --- a/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi +++ b/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi @@ -7,7 +7,7 @@ #include /{ - thermal_zones { + thermal-zones { pmh0104_i0_thermal: pmh0104-i0-thermal { polling-delay-passive = <100>; thermal-sensors = <&pmh0104_i_e0_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index 7e05f87..51b13b4 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -498,6 +498,18 @@ status = "okay"; }; +&qspi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -610,7 +622,7 @@ vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index e393ccf..37a3b51 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -44,6 +44,14 @@ stdout-path = "serial0:115200n8"; }; + clocks { + mcp2518fd_osc: can-clk { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + }; + }; + dp-connector { compatible = "dp-connector"; label = "DP"; @@ -157,6 +165,15 @@ reg = <0x0 0xd0600000 0x0 0x100000>; no-map; }; + + rmtfs_mem: memory@f8500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf8500000 0x0 0x600000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = , ; + }; }; gpio-keys { @@ -1208,6 +1225,20 @@ }; }; +&spi3 { + status = "okay"; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + interrupts-extended = <&tlmm 7 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mcp2518fd_osc>; + spi-max-frequency = <14000000>; + vdd-supply = <&vreg_l11c_2p8>; + microchip,xstbyen; + }; +}; + &swr2 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi index d65ad0d..3c9529b 100644 --- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi +++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi @@ -1612,7 +1612,7 @@ status = "disabled"; - remoteproc_adsp_glink: glink-edge { + glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index a4b1756..fa65c48 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1605,7 +1605,11 @@ compatible = "qcom,sc7180-inline-crypto-engine", "qcom,inline-crypto-engine"; reg = <0 0x01d90000 0 0x8000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>; + clock-names = "core", + "iface"; + power-domains = <&gcc UFS_PHY_GDSC>; }; ipa: ipa@1e40000 { @@ -2866,9 +2870,12 @@ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <&gcc GCC_QSPI_CORE_CLK>; clock-names = "iface", "core"; - interconnects = <&gem_noc MASTER_APPSS_PROC 0 - &config_noc SLAVE_QSPI_0 0>; - interconnect-names = "qspi-config"; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QSPI_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QSPI QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qspi-config", + "qspi-memory"; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qspi_opp_table>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index f45deb1..4539176 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -2647,7 +2647,7 @@ status = "disabled"; }; - usb_sec_qmpphy: phy@88ee000 { + usb_sec_qmpphy: phy@88ed000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; reg = <0 0x088ed000 0 0x3000>; @@ -3755,7 +3755,7 @@ status = "disabled"; - remoteproc_adsp_glink: glink-edge { + glink-edge { interrupts = ; label = "lpass"; qcom,remote-pid = <2>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index c53e00c..dcdeefd 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -787,7 +787,7 @@ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts index 9819454..f3c00be 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts @@ -1122,7 +1122,7 @@ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; max-speed = <3200000>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index d84ca01..abd9c5a 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -1331,7 +1331,7 @@ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; max-speed = <3200000>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts index 00bbeee..125af35 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts @@ -976,7 +976,7 @@ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; max-speed = <3200000>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 761f229..a2bd6b1 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -2956,7 +2956,7 @@ status = "disabled"; - remoteproc_adsp_glink: glink-edge { + glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -2966,6 +2966,33 @@ label = "lpass"; qcom,remote-pid = <2>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0c03 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x0c04 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x0c05 0x0>; + }; + }; + gpr { compatible = "qcom,gpr"; qcom,glink-channels = "adsp_apps"; @@ -6871,8 +6898,6 @@ thermal-zones { cpu0-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 1>; trips { @@ -6885,8 +6910,6 @@ }; cpu1-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 2>; trips { @@ -6899,8 +6922,6 @@ }; cpu2-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 3>; trips { @@ -6913,8 +6934,6 @@ }; cpu3-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 4>; trips { @@ -6927,8 +6946,6 @@ }; cpu4-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 5>; trips { @@ -6941,8 +6958,6 @@ }; cpu5-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 6>; trips { @@ -6955,8 +6970,6 @@ }; cpu6-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 7>; trips { @@ -6969,8 +6982,6 @@ }; cpu7-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 8>; trips { @@ -6983,8 +6994,6 @@ }; cluster0-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 9>; trips { @@ -7024,8 +7033,6 @@ }; mem-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens1 15>; trips { diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index bef3213..a41ba0d 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -494,9 +494,12 @@ no-map; }; - adsp_mem: adsp-region@f6000000 { - reg = <0x0 0xf6000000 0x0 0x800000>; - no-map; + adsp_mem: adsp-region { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x80000000 0x0 0x80000000>; + alignment = <0x0 0x400000>; + size = <0x0 0x800000>; + reusable; }; qseecom_mem: qseecom-region@f6800000 { @@ -2455,31 +2458,34 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "adsp"; + memory-region = <&adsp_mem>; + qcom,vmids = ; qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; - compute-cb@1 { + compute-cb@3 { compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; + reg = <3>; iommus = <&lpass_smmu 3>; }; - compute-cb@2 { + compute-cb@7 { compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; + reg = <7>; iommus = <&lpass_smmu 7>; }; - compute-cb@3 { + compute-cb@8 { compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; + reg = <8>; iommus = <&lpass_smmu 8>; }; - compute-cb@4 { + compute-cb@9 { compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; + reg = <9>; iommus = <&lpass_smmu 9>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index 3fd6dd8..0fca966 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -350,57 +350,57 @@ #address-cells = <1>; #size-cells = <0>; - compute-cb@5 { + compute-cb@3 { compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; + reg = <3>; iommus = <&cdsp_smmu 3>; }; - compute-cb@6 { + compute-cb@4 { compatible = "qcom,fastrpc-compute-cb"; - reg = <6>; + reg = <4>; iommus = <&cdsp_smmu 4>; }; - compute-cb@7 { + compute-cb@5 { compatible = "qcom,fastrpc-compute-cb"; - reg = <7>; + reg = <5>; iommus = <&cdsp_smmu 5>; }; - compute-cb@8 { + compute-cb@6 { compatible = "qcom,fastrpc-compute-cb"; - reg = <8>; + reg = <6>; iommus = <&cdsp_smmu 6>; }; - compute-cb@9 { + compute-cb@7 { compatible = "qcom,fastrpc-compute-cb"; - reg = <9>; + reg = <7>; iommus = <&cdsp_smmu 7>; }; - compute-cb@10 { + compute-cb@8 { compatible = "qcom,fastrpc-compute-cb"; - reg = <10>; + reg = <8>; iommus = <&cdsp_smmu 8>; }; - compute-cb@11 { + compute-cb@9 { compatible = "qcom,fastrpc-compute-cb"; - reg = <11>; + reg = <9>; iommus = <&cdsp_smmu 9>; }; - compute-cb@12 { + compute-cb@10 { compatible = "qcom,fastrpc-compute-cb"; - reg = <12>; + reg = <10>; iommus = <&cdsp_smmu 10>; }; - compute-cb@13 { + compute-cb@11 { compatible = "qcom,fastrpc-compute-cb"; - reg = <13>; + reg = <11>; iommus = <&cdsp_smmu 11>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts b/arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts new file mode 100644 index 0000000..42ddaf5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device tree for Google Pixel 3a XL with the Tianma panel. + * + * Copyright (c) Richard Acayan. All rights reserved. + */ + +/dts-v1/; + +#include "sdm670-google-common.dtsi" + +/ { + model = "Google Pixel 3a XL (with Tianma panel)"; + compatible = "google,bonito-tianma", "google,bonito", "qcom,sdm670"; +}; + +&battery { + charge-full-design-microamp-hours = <3700000>; +}; + +&framebuffer { + height = <2160>; +}; + +&panel { + compatible = "novatek,nt37700f"; +}; + +&rmi4_f12 { + touchscreen-x-mm = <69>; + touchscreen-y-mm = <137>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi new file mode 100644 index 0000000..0f57b91 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi @@ -0,0 +1,712 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for Google Pixel 3a, adapted from google-blueline device tree, + * xiaomi-lavender device tree, and oneplus-common device tree. + * + * Copyright (c) 2022, Richard Acayan. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include "sdm670.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" + +/delete-node/ &mpss_region; +/delete-node/ &venus_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mba_region; +/delete-node/ &adsp_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; + +/ { + aliases { }; + + battery: battery { + compatible = "simple-battery"; + + voltage-min-design-microvolt = <3312000>; + voltage-max-design-microvolt = <4400000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + memory-region = <&fb_mem>; + width = <1080>; + /* height is in specific device trees */ + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin>; + + key-vol-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + mpss_region: mpss@8b000000 { + reg = <0 0x8b000000 0 0x9800000>; + no-map; + }; + + venus_mem: venus@94800000 { + reg = <0 0x94800000 0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@94d00000 { + reg = <0 0x94d00000 0 0x100000>; + no-map; + }; + + cdsp_mem: cdsp@94e00000 { + reg = <0 0x94e00000 0 0x800000>; + no-map; + }; + + mba_region: mba@95600000 { + reg = <0 0x95600000 0 0x200000>; + no-map; + }; + + adsp_mem: adsp@95800000 { + reg = <0 0x95800000 0 0x2200000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@97a00000 { + reg = <0 0x97a00000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@97a10000 { + reg = <0 0x97a10000 0 0x5000>; + no-map; + }; + + gpu_mem: gpu@97a15000 { + reg = <0 0x97a15000 0 0x2000>; + no-map; + }; + + fb_mem: framebuffer-region@9c000000 { + reg = <0 0x9c000000 0 0x2400000>; + no-map; + }; + + /* Also includes ramoops regions */ + debug_info_mem: debug-info@a1800000 { + reg = <0 0xa1800000 0 0x411000>; + no-map; + }; + }; + + /* + * The touchscreen regulator seems to be controlled somehow by a gpio. + * Model it as a fixed regulator and keep it on. Without schematics we + * don't know how this is actually wired up... + */ + ts_1p8_supply: ts-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_1p8_supply"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + + regulator-always-on; + regulator-boot-on; + }; + + /* + * Supply map from xiaomi-lavender specifies this as the supply for + * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies + * this as a power domain. Set this as a fixed regulator with the same + * voltage as lavender until display is needed to avoid unneccessarily + * using a deprecated binding (regulator-fixed-domain). + */ + vreg_s2b_1p05: vreg-s2b-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s2b"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + cam_front_ldo: cam-front-ldo-regulator { + compatible = "regulator-fixed"; + regulator-name = "cam_front_ldo"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-enable-ramp-delay = <135>; + + gpios = <&pm660l_gpios 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam_front_ldo_pin>; + pinctrl-names = "default"; + }; + + cam_vio_ldo: cam-vio-ldo-regulator { + compatible = "regulator-fixed"; + regulator-name = "cam_vio_ldo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <233>; + + gpios = <&pm660_gpios 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam_vio_pin>; + pinctrl-names = "default"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm660-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>; + vdd-l2-l3-supply = <&vreg_s2b_1p05>; + vdd-l5-supply = <&vreg_s2b_1p05>; + vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>; + vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>; + + /* + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed + * by the Core Power Reduction hardened (CPRh) and the + * Operating State Manager (OSM) HW automatically. + */ + + vreg_s4a_2p04: smps4 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + }; + + vreg_s6a_0p87: smps6 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1352000>; + regulator-enable-ramp-delay = <150>; + }; + + /* LDOs */ + vreg_l1a_1p225: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l5a_0p848: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l6a_1p3: ldo6 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l7a_1p2: ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8a_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-always-on; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2696000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l17a_1p8: ldo17 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l19a_3p3: ldo19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-enable-ramp-delay = <250>; + }; + }; + + regulators-1 { + compatible = "qcom,pm660l-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>; + vdd-l2-supply = <&vreg_bob>; + vdd-l3-l5-l7-l8-supply = <&vreg_bob>; + vdd-l4-l6-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + /* LDOs */ + vreg_l1b_0p925: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <900000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l2b_2p95: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l3b_3p0: ldo3 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3008000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l4b_2p95: ldo4 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l5b_2p95: ldo5 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l6b_3p3: ldo6 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l7b_3p125: ldo7 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8b_3p3: ldo8 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-enable-ramp-delay = <250>; + }; + + /* + * Downstream specifies a fixed voltage of 3.312 V, but the + * PMIC4 BOB ranges don't support that. Widen the range a + * little to avoid adding a new BOB regulator type. + */ + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <500>; + }; + }; +}; + +&camss { + vdda-phy-supply = <&vreg_l1a_1p225>; + vdda-pll-supply = <&vreg_s6a_0p87>; + + status = "okay"; +}; + +&camss_port1 { + camss_endpoint1: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&cam_front_endpoint>; + }; +}; + +&cci { + pinctrl-0 = <&cci1_default>; + pinctrl-1 = <&cci1_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&cci_i2c1 { + camera@1a { + compatible = "sony,imx355"; + reg = <0x1a>; + + clocks = <&camcc CAM_CC_MCLK2_CLK>; + + /* + * The sensor can accept a 24 MHz clock, but 19.2 MHz has + * better driver compatibility. + */ + assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>; + assigned-clock-rates = <19200000>; + + reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; + + avdd-supply = <&cam_front_ldo>; + dvdd-supply = <&cam_front_ldo>; + dovdd-supply = <&cam_vio_ldo>; + + pinctrl-0 = <&cam_mclk2_default>; + pinctrl-names = "default"; + + rotation = <270>; + orientation = <0>; + + port { + cam_front_endpoint: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <360000000>; + remote-endpoint = <&camss_endpoint1>; + }; + }; + }; +}; + +&gcc { + protected-clocks = , + , + ; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm670/sargo/a615_zap.mbn"; +}; + +&i2c9 { + clock-frequency = <100000>; + status = "okay"; + + synaptics-rmi4-i2c@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + + vio-supply = <&ts_1p8_supply>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4_f12: rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l1a_1p225>; + status = "okay"; + + panel: panel@0 { + /* compatible is provided in specific device trees */ + reg = <0>; + + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_default>; + + power-supply = <&vreg_l6b_3p3>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1b_0p925>; + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pm660_charger { + monitored-battery = <&battery>; + status = "okay"; +}; + +&pm660_gpios { + cam_vio_pin: cam-vio-state { + pins = "gpio13"; + function = "normal"; + power-source = <0>; + }; +}; + +&pm660_rradc { + status = "okay"; +}; + +&pm660l_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <1>, <2>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pm660l_gpios { + cam_front_ldo_pin: cam-front-state { + pins = "gpio4"; + function = "normal"; + power-source = <0>; + }; + + vol_up_pin: vol-up-state { + pins = "gpio7"; + function = "normal"; + qcom,drive-strength = ; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_1 { + supports-cqe; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + + qcom,ddr-config = <0xc3040873>; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + panel_default: panel-default-state { + te-pins { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-pins { + pins = "gpio75"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mode-pins { + pins = "gpio76"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + touchscreen_default: ts-default-state { + ts-reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-high; + }; + + ts-irq-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts-switch-pins { + pins = "gpio135"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + }; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; + + status = "okay"; +}; + +&usb_1 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + /* Only peripheral works for now */ + dr_mode = "peripheral"; + + /* Do not assume that sdm670.dtsi will never support USB 3.0 */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts index ed55646..c67a039 100644 --- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -1,620 +1,32 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only /* - * Device tree for Google Pixel 3a, adapted from google-blueline device tree, - * xiaomi-lavender device tree, and oneplus-common device tree. + * Device tree for Google Pixel 3a (non-XL). * - * Copyright (c) 2022, Richard Acayan. All rights reserved. + * Copyright (c) Richard Acayan. All rights reserved. */ /dts-v1/; -#include -#include -#include -#include -#include -#include "sdm670.dtsi" -#include "pm660.dtsi" -#include "pm660l.dtsi" - -/delete-node/ &mpss_region; -/delete-node/ &venus_mem; -/delete-node/ &wlan_msa_mem; -/delete-node/ &cdsp_mem; -/delete-node/ &mba_region; -/delete-node/ &adsp_mem; -/delete-node/ &ipa_fw_mem; -/delete-node/ &ipa_gsi_mem; -/delete-node/ &gpu_mem; +#include "sdm670-google-common.dtsi" / { model = "Google Pixel 3a"; compatible = "google,sargo", "qcom,sdm670"; - - aliases { }; - - battery: battery { - compatible = "simple-battery"; - - voltage-min-design-microvolt = <3312000>; - voltage-max-design-microvolt = <4400000>; - charge-full-design-microamp-hours = <3000000>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - - framebuffer@9c000000 { - compatible = "simple-framebuffer"; - reg = <0 0x9c000000 0 (1080 * 2220 * 4)>; - width = <1080>; - height = <2220>; - stride = <(1080 * 4)>; - format = "a8r8g8b8"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&vol_up_pin>; - - key-vol-up { - label = "Volume Up"; - linux,code = ; - gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - - mpss_region: mpss@8b000000 { - reg = <0 0x8b000000 0 0x9800000>; - no-map; - }; - - venus_mem: venus@94800000 { - reg = <0 0x94800000 0 0x500000>; - no-map; - }; - - wlan_msa_mem: wlan-msa@94d00000 { - reg = <0 0x94d00000 0 0x100000>; - no-map; - }; - - cdsp_mem: cdsp@94e00000 { - reg = <0 0x94e00000 0 0x800000>; - no-map; - }; - - mba_region: mba@95600000 { - reg = <0 0x95600000 0 0x200000>; - no-map; - }; - - adsp_mem: adsp@95800000 { - reg = <0 0x95800000 0 0x2200000>; - no-map; - }; - - ipa_fw_mem: ipa-fw@97a00000 { - reg = <0 0x97a00000 0 0x10000>; - no-map; - }; - - ipa_gsi_mem: ipa-gsi@97a10000 { - reg = <0 0x97a10000 0 0x5000>; - no-map; - }; - - gpu_mem: gpu@97a15000 { - reg = <0 0x97a15000 0 0x2000>; - no-map; - }; - - framebuffer-region@9c000000 { - reg = <0 0x9c000000 0 0x2400000>; - no-map; - }; - - /* Also includes ramoops regions */ - debug_info_mem: debug-info@a1800000 { - reg = <0 0xa1800000 0 0x411000>; - no-map; - }; - }; - - /* - * The touchscreen regulator seems to be controlled somehow by a gpio. - * Model it as a fixed regulator and keep it on. Without schematics we - * don't know how this is actually wired up... - */ - ts_1p8_supply: ts-1p8-regulator { - compatible = "regulator-fixed"; - regulator-name = "ts_1p8_supply"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3312000>; - - regulator-always-on; - regulator-boot-on; - }; - - /* - * Supply map from xiaomi-lavender specifies this as the supply for - * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies - * this as a power domain. Set this as a fixed regulator with the same - * voltage as lavender until display is needed to avoid unneccessarily - * using a deprecated binding (regulator-fixed-domain). - */ - vreg_s2b_1p05: vreg-s2b-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_s2b"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pm660-rpmh-regulators"; - qcom,pmic-id = "a"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-s6-supply = <&vph_pwr>; - - vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>; - vdd-l2-l3-supply = <&vreg_s2b_1p05>; - vdd-l5-supply = <&vreg_s2b_1p05>; - vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>; - vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>; - - /* - * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed - * by the Core Power Reduction hardened (CPRh) and the - * Operating State Manager (OSM) HW automatically. - */ - - vreg_s4a_2p04: smps4 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2040000>; - regulator-enable-ramp-delay = <200>; - }; - - vreg_s6a_0p87: smps6 { - regulator-min-microvolt = <1224000>; - regulator-max-microvolt = <1352000>; - regulator-enable-ramp-delay = <150>; - }; - - /* LDOs */ - vreg_l1a_1p225: ldo1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1250000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l2a_1p0: ldo2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l3a_1p0: ldo3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l5a_0p848: ldo5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l6a_1p3: ldo6 { - regulator-min-microvolt = <1248000>; - regulator-max-microvolt = <1304000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l7a_1p2: ldo7 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l8a_1p8: ldo8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <250>; - regulator-always-on; - }; - - vreg_l9a_1p8: ldo9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l10a_1p8: ldo10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l11a_1p8: ldo11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l12a_1p8: ldo12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l13a_1p8: ldo13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l14a_1p8: ldo14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l15a_1p8: ldo15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l16a_2p7: ldo16 { - regulator-min-microvolt = <2696000>; - regulator-max-microvolt = <2696000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l17a_1p8: ldo17 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l19a_3p3: ldo19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3312000>; - regulator-enable-ramp-delay = <250>; - }; - }; - - regulators-1 { - compatible = "qcom,pm660l-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - - vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>; - vdd-l2-supply = <&vreg_bob>; - vdd-l3-l5-l7-l8-supply = <&vreg_bob>; - vdd-l4-l6-supply = <&vreg_bob>; - vdd-bob-supply = <&vph_pwr>; - - /* LDOs */ - vreg_l1b_0p925: ldo1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <900000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l2b_2p95: ldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l3b_3p0: ldo3 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3008000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l4b_2p95: ldo4 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l5b_2p95: ldo5 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l6b_3p3: ldo6 { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3300000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l7b_3p125: ldo7 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3100000>; - regulator-enable-ramp-delay = <250>; - }; - - vreg_l8b_3p3: ldo8 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3312000>; - regulator-enable-ramp-delay = <250>; - }; - - /* - * Downstream specifies a fixed voltage of 3.312 V, but the - * PMIC4 BOB ranges don't support that. Widen the range a - * little to avoid adding a new BOB regulator type. - */ - vreg_bob: bob { - regulator-min-microvolt = <3296000>; - regulator-max-microvolt = <3328000>; - regulator-enable-ramp-delay = <500>; - }; - }; -}; - -&gcc { - protected-clocks = , - , - ; -}; - -&gpi_dma1 { - status = "okay"; -}; - -&gpu { - status = "okay"; -}; - -&gpu_zap_shader { - firmware-name = "qcom/sdm670/sargo/a615_zap.mbn"; -}; - -&i2c9 { - clock-frequency = <100000>; - status = "okay"; - - synaptics-rmi4-i2c@20 { - compatible = "syna,rmi4-i2c"; - reg = <0x20>; - interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; - - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_default>; - - vio-supply = <&ts_1p8_supply>; - - syna,reset-delay-ms = <200>; - syna,startup-delay-ms = <200>; - - #address-cells = <1>; - #size-cells = <0>; - - rmi4-f01@1 { - reg = <0x01>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - touchscreen-x-mm = <62>; - touchscreen-y-mm = <127>; - syna,sensor-type = <1>; - }; - }; -}; - -&mdss { - status = "okay"; -}; - -&mdss_dsi0 { - vdda-supply = <&vreg_l1a_1p225>; - status = "okay"; - - panel@0 { - compatible = "samsung,s6e3fa7-ams559nk06"; - reg = <0>; - - reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_default>; - - power-supply = <&vreg_l6b_3p3>; - - port { - panel_in: endpoint { - remote-endpoint = <&mdss_dsi0_out>; - }; - }; - }; -}; - -&mdss_dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&mdss_dsi0_phy { - vdds-supply = <&vreg_l1b_0p925>; - status = "okay"; -}; - -&mdss_mdp { - status = "okay"; -}; - -&pm660_charger { - monitored-battery = <&battery>; - status = "okay"; -}; - -&pm660_rradc { - status = "okay"; -}; - -&pm660l_flash { - status = "okay"; - - led-0 { - function = LED_FUNCTION_FLASH; - color = ; - led-sources = <1>, <2>; - led-max-microamp = <500000>; - flash-max-microamp = <1500000>; - flash-max-timeout-us = <1280000>; - }; -}; - -&pm660l_gpios { - vol_up_pin: vol-up-state { - pins = "gpio7"; - function = "normal"; - qcom,drive-strength = ; - input-enable; - bias-pull-up; - }; }; -&pon_pwrkey { - status = "okay"; +&battery { + charge-full-design-microamp-hours = <3000000>; }; -&pon_resin { - linux,code = ; - status = "okay"; +&framebuffer { + height = <2220>; }; -&qupv3_id_1 { - status = "okay"; +&panel { + compatible = "samsung,s6e3fa7-ams559nk06"; }; -&sdhc_1 { - supports-cqe; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - mmc-ddr-1_8v; - - qcom,ddr-config = <0xc3040873>; - - vmmc-supply = <&vreg_l4b_2p95>; - vqmmc-supply = <&vreg_l8a_1p8>; - - status = "okay"; -}; - -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; - - panel_default: panel-default-state { - te-pins { - pins = "gpio10"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-pull-down; - }; - - reset-pins { - pins = "gpio75"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - - mode-pins { - pins = "gpio76"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - touchscreen_default: ts-default-state { - ts-reset-pins { - pins = "gpio99"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - output-high; - }; - - ts-irq-pins { - pins = "gpio125"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - ts-switch-pins { - pins = "gpio135"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-low; - }; - }; -}; - -&usb_1_hsphy { - vdd-supply = <&vreg_l1b_0p925>; - vdda-pll-supply = <&vreg_l10a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; - - status = "okay"; -}; - -&usb_1 { - qcom,select-utmi-as-pipe-clk; - status = "okay"; -}; - -&usb_1_dwc3 { - /* Only peripheral works for now */ - dr_mode = "peripheral"; - - /* Do not assume that sdm670.dtsi will never support USB 3.0 */ - phys = <&usb_1_hsphy>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; +&rmi4_f12 { + touchscreen-x-mm = <62>; + touchscreen-y-mm = <127>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index c195c79..30844b1 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -1207,6 +1207,34 @@ gpio-ranges = <&tlmm 0 0 151>; wakeup-parent = <&pdc>; + cam_mclk0_default: cam-mclk0-default-state { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk1_default: cam-mclk1-default-state { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk2_default: cam-mclk2-default-state { + pins = "gpio15"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk3_default: cam-mclk3-default-state { + pins = "gpio16"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + cci0_default: cci0-default-state { pins = "gpio17", "gpio18"; function = "cci_i2c"; @@ -1787,28 +1815,16 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { + camss_port0: port@0 { reg = <0>; - - camss_endpoint0: endpoint { - status = "disabled"; - }; }; - port@1 { + camss_port1: port@1 { reg = <1>; - - camss_endpoint1: endpoint { - status = "disabled"; - }; }; - port@2 { + camss_port2: port@2 { reg = <2>; - - camss_endpoint2: endpoint { - status = "disabled"; - }; }; }; }; @@ -2284,5 +2300,78 @@ #freq-domain-cells = <1>; }; + + lpi_tlmm: pinctrl@62b40000 { + compatible = "qcom,sdm670-lpass-lpi-pinctrl"; + reg = <0 0x62b40000 0 0x20000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 32>; + + cdc_pdm_default: cdc-pdm-default-state { + clk-pins { + pins = "gpio18"; + function = "slimbus_clk"; + drive-strength = <4>; + output-low; + }; + + sync-pins { + pins = "gpio19"; + function = "pdm_sync"; + drive-strength = <4>; + output-low; + }; + + tx-pins { + pins = "gpio20"; + function = "pdm_tx"; + drive-strength = <8>; + }; + + rx-pins { + pins = "gpio21", "gpio23", "gpio25"; + function = "pdm_rx"; + drive-strength = <4>; + output-low; + }; + }; + + cdc_comp_default: cdc-comp-default-state { + pins = "gpio22", "gpio24"; + function = "comp_rx"; + drive-strength = <4>; + }; + + cdc_dmic_default: cdc-dmic-default-state { + clk1-pins { + pins = "gpio26"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + clk2-pins { + pins = "gpio28"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data1-pins { + pins = "gpio27"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + + data2-pins { + pins = "gpio29"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso index dbe1911..678a17c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso @@ -16,7 +16,12 @@ status = "okay"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csiphy0_ep: endpoint { data-lanes = <0 1 2 3>; remote-endpoint = <&ov8856_ep>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi index 6930066..b2dc032 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi @@ -391,6 +391,23 @@ firmware-name = "qcom/sdm845/Google/blueline/a630_zap.mbn"; }; +&i2c3 { + status = "okay"; + + nfc@28 { + compatible = "nxp,pn557", "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&nfc_int_default &nfc_enable_default>; + pinctrl-names = "default"; + }; +}; + &i2c12 { /* Bottom spkr (right) CS35L36 @ 40 */ @@ -459,6 +476,20 @@ gpio-reserved-ranges = < 0 4>, /* SPI (Intel MNH Pixel Visual Core) */ <81 4>; /* SPI (most likely Fingerprint Cards FPC1075) */ + nfc_int_default: nfc-int-default-state { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_enable_default: nfc-enable-default-state { + pins = "gpio25", "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + touchscreen_reset: ts-reset-state { pins = "gpio99"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index 71d0706..e0c3566 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -98,8 +98,7 @@ no-map; }; - /* Framebuffer region */ - memory@9d400000 { + framebuffer_mem: memory@9d400000 { reg = <0x0 0x9d400000 0x0 0x2400000>; no-map; }; @@ -473,7 +472,9 @@ }; &ipa { - qcom,gsi-loader = "modem"; + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + status = "okay"; }; @@ -496,6 +497,19 @@ status = "okay"; }; +&pmi8998_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <1>, <2>; + led-max-microamp = <100000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <500000>; + }; +}; + &pmi8998_lpg { status = "okay"; @@ -680,5 +694,7 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + qcom,snoc-host-cap-skip-quirk; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts index adf41aa..349faa1 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -14,9 +14,9 @@ compatible = "lg,judyln", "qcom,sdm845"; chosen { - framebuffer@9d400000 { + framebuffer { compatible = "simple-framebuffer"; - reg = <0x0 0x9d400000 0x0 (1440 * 3120 * 4)>; + memory-region = <&framebuffer_mem>; width = <1440>; height = <3120>; stride = <(1440 * 4)>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts index d244ebd..44e762f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts @@ -14,9 +14,9 @@ compatible = "lg,judyp", "qcom,sdm845"; chosen { - framebuffer@9d400000 { + framebuffer { compatible = "simple-framebuffer"; - reg = <0x0 0x9d400000 0x0 (1440 * 2880 * 4)>; + memory-region = <&framebuffer_mem>; width = <1440>; height = <2880>; stride = <(1440 * 4)>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 6b7378c..a6c2519 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -72,7 +72,7 @@ stdout-path = "serial0:115200n8"; - framebuffer: framebuffer@9d400000 { + framebuffer: framebuffer { compatible = "simple-framebuffer"; memory-region = <&cont_splash_mem>; @@ -442,6 +442,26 @@ }; }; +&cci { + status = "okay"; +}; + +&cci_i2c0 { + /* front sony,imx371 @10 */ + + /* rear sony,imx519 @1a */ + + /* rear onnn,lc898217xc @72 */ +}; + +&cci_i2c1 { + /* sa,sa3103 @0d */ + + /* rear sony,imx376k @10 */ + + /* onnn,lc898217xc @74 */ +}; + &cdsp_pas { firmware-name = "qcom/sdm845/OnePlus/enchilada/cdsp.mbn"; @@ -464,6 +484,26 @@ firmware-name = "qcom/sdm845/OnePlus/enchilada/a630_zap.mbn"; }; +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + nfc@28 { + compatible = "nxp,pn553", "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&nfc_default>; + pinctrl-1 = <&nfc_sleep>; + pinctrl-names = "default", "sleep"; + }; +}; + &i2c10 { status = "okay"; clock-frequency = <100000>; @@ -674,6 +714,11 @@ status = "okay"; }; +&qup_i2c3_default { + drive-strength = <2>; + bias-disable; +}; + &qup_i2c10_default { drive-strength = <2>; bias-disable; @@ -1007,6 +1052,38 @@ bias-pull-up; output-high; }; + + nfc_default: nfc-default-state { + enable-pins { + pins = "gpio12", "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + int-pins { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + nfc_sleep: nfc-sleep-state { + enable-pins { + pins = "gpio12", "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + int-pins { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; &venus { diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts index 77f5872..0d915ec 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts @@ -43,9 +43,10 @@ #address-cells = <2>; #size-cells = <2>; ranges; - framebuffer: framebuffer@9d400000 { + + framebuffer { compatible = "simple-framebuffer"; - reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000 + memory-region = <&framebuffer_mem>; width = <1440>; height = <2960>; stride = <(1440 * 4)>; @@ -109,7 +110,7 @@ }; reserved-memory { - memory@9d400000 { + framebuffer_mem: memory@9d400000 { reg = <0x0 0x9d400000 0x0 0x02400000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 7d81198..f21b914 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -23,7 +23,7 @@ qcom,board-id = <11 0>; aliases { - display0 = &framebuffer0; + display0 = &framebuffer; serial0 = &uart9; serial1 = &uart6; }; @@ -36,9 +36,9 @@ stdout-path = "serial0"; /* Use framebuffer setup by the bootloader. */ - framebuffer0: framebuffer@9d400000 { + framebuffer: framebuffer { compatible = "simple-framebuffer"; - reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; + memory-region = <&framebuffer_mem>; width = <1080>; height = <2160>; stride = <(1080 * 4)>; @@ -62,7 +62,7 @@ }; reserved-memory { - framebuffer@9d400000 { + framebuffer_mem: framebuffer@9d400000 { reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; no-map; }; @@ -105,6 +105,43 @@ vin-supply = <&vph_pwr>; }; + + wcn3990-pmu { + compatible = "qcom,wcn3990-pmu"; + + pinctrl-0 = <&sw_ctrl_default>; + pinctrl-names = "default"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + + swctrl-gpios = <&pm8998_gpios 3 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_io: ldo0 { + regulator-name = "vreg_pmu_io"; + }; + + vreg_pmu_xo: ldo1 { + regulator-name = "vreg_pmu_xo"; + }; + + vreg_pmu_rf: ldo2 { + regulator-name = "vreg_pmu_rf"; + }; + + vreg_pmu_ch0: ldo3 { + regulator-name = "vreg_pmu_ch0"; + }; + + vreg_pmu_ch1: ldo4 { + regulator-name = "vreg_pmu_ch1"; + }; + }; + }; }; &adsp_pas { @@ -431,6 +468,26 @@ firmware-name = "qcom/sdm845/SHIFT/axolotl/a630_zap.mbn"; }; +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + nfc@28 { + compatible = "nxp,pn553", "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&nfc_default>; + pinctrl-1 = <&nfc_sleep>; + pinctrl-names = "default", "sleep"; + }; +}; + &i2c5 { clock-frequency = <400000>; @@ -448,7 +505,7 @@ pinctrl-0 = <&ts_int_active &ts_reset_active>; pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; - pinctrl-names = "default", "suspend"; + pinctrl-names = "default", "sleep"; touchscreen-size-x = <1080>; touchscreen-size-y = <2160>; @@ -526,6 +583,13 @@ }; &pm8998_gpios { + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio3"; + function = "normal"; + input-enable; + bias-pull-down; + }; + volume_up_gpio: pm8998-gpio6-state { pinconf { pins = "gpio6"; @@ -668,6 +732,38 @@ bias-disable; }; + nfc_default: nfc-default-state { + enable-pins { + pins = "gpio12", "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + int-pins { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + nfc_sleep: nfc-sleep-state { + enable-pins { + pins = "gpio12", "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + int-pins { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + sde_dsi_active: sde-dsi-active-state { pins = "gpio6", "gpio11"; function = "gpio"; @@ -732,10 +828,11 @@ */ firmware-name = "SHIFT/axolotl/crnv21.bin"; - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; + vddio-supply = <&vreg_pmu_io>; + vddxo-supply = <&vreg_pmu_xo>; + vddrf-supply = <&vreg_pmu_rf>; + vddch0-supply = <&vreg_pmu_ch0>; + max-speed = <3200000>; }; }; @@ -790,14 +887,14 @@ }; &wifi { - status = "okay"; - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + vdd-1.8-xo-supply = <&vreg_pmu_xo>; + vdd-1.3-rfa-supply = <&vreg_pmu_rf>; + vdd-3.3-ch0-supply = <&vreg_pmu_ch0>; + vdd-3.3-ch1-supply = <&vreg_pmu_ch1>; qcom,calibration-variant = "shift_axolotl"; qcom,snoc-host-cap-8bit-quirk; + + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 1298485..54e58ca 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -39,6 +39,22 @@ serial1 = &uart6; }; + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer { + compatible = "simple-framebuffer"; + memory-region = <&cont_splash_mem>; + + format = "a8r8g8b8"; + stride = <(1080 * 4)>; + height = <2246>; + width = <1080>; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat; @@ -271,7 +287,7 @@ &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; + firmware-name = "qcom/sdm845/Xiaomi/beryllium/ipa_fws.mbn"; status = "okay"; }; @@ -661,5 +677,6 @@ vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,calibration-variant = "xiaomi_beryllium"; + qcom,snoc-host-cap-skip-quirk; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts index 2d6f0e3..d157622 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts @@ -6,7 +6,7 @@ / { model = "Xiaomi Pocophone F1 (EBBG)"; - compatible = "xiaomi,beryllium-ebbg", "qcom,sdm845"; + compatible = "xiaomi,beryllium-ebbg", "xiaomi,beryllium", "qcom,sdm845"; }; &display_panel { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts index b58964c..71816a9 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts @@ -6,7 +6,7 @@ / { model = "Xiaomi Pocophone F1 (Tianma)"; - compatible = "xiaomi,beryllium", "qcom,sdm845"; + compatible = "xiaomi,beryllium-tianma", "xiaomi,beryllium", "qcom,sdm845"; }; &display_panel { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index 97f64cb..b9d9439 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -95,6 +95,33 @@ pinctrl-names = "default"; }; + panel_vdd_1p8: regulator-panel-vdd { + compatible = "regulator-fixed"; + regulator-name = "panel_vdd_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + vin-supply = <&vreg_l9a>; + + enable-active-high; + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&panel_vdd_1p8_en>; + pinctrl-names = "default"; + }; + + panel_vci_3p0: regulator-panel-vci { + compatible = "regulator-fixed"; + regulator-name = "panel_vci_3p0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + + enable-active-high; + gpio = <&tlmm 124 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&panel_vci_3p0_en>; + pinctrl-names = "default"; + }; + thermal-zones { rf-pa0-thermal { thermal-sensors = <&pm6125_adc_tm 0>; @@ -162,6 +189,45 @@ }; }; +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l18a>; + status = "okay"; + + panel@0 { + compatible = "samsung,s6e8fco-m1906f9"; + reg = <0>; + + reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + pinctrl-names = "default", "sleep"; + + vdd-supply = <&panel_vdd_1p8>; + vci-supply = <&panel_vci_3p0>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + + +&mdss_dsi0_phy { + status = "okay"; +}; + &pm6125_adc { pinctrl-names = "default"; pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; @@ -426,6 +492,13 @@ &tlmm { gpio-reserved-ranges = <22 2>, <28 6>; + panel_vdd_1p8_en: panel-vdd-default-state { + pins = "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + ts_vdd_en: ts-vdd-default-state { pins = "gpio83"; function = "gpio"; @@ -460,6 +533,27 @@ drive-strength = <2>; bias-pull-down; }; + + mdss_default: mdss-default-state { + pins = "gpio90"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_sleep: mdss-sleep-state { + pins = "gpio90"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + panel_vci_3p0_en: panel-vci-default-state { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &ufs_mem_hc { diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 034545d..d6adf68 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1450,6 +1450,72 @@ }; }; + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sm6350-lpass-lpi-pinctrl"; + reg = <0x0 0x033c0000 0x0 0x20000>, + <0x0 0x03550000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", + "audio"; + + i2s1_active: i2s1-active-state { + clk-pins { + pins = "gpio6"; + function = "i2s1_clk"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + ws-pins { + pins = "gpio7"; + function = "i2s1_ws"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + data-pins { + pins = "gpio8", "gpio9"; + function = "i2s1_data"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; + + i2s1_sleep: i2s1-sleep-state { + clk-pins { + pins = "gpio6"; + function = "i2s1_clk"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + ws-pins { + pins = "gpio7"; + function = "i2s1_ws"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + data-pins { + pins = "gpio8", "gpio9"; + function = "i2s1_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + }; + gpu: gpu@3d00000 { compatible = "qcom,adreno-619.0", "qcom,adreno"; reg = <0x0 0x03d00000 0x0 0x40000>, diff --git a/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts b/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts new file mode 100644 index 0000000..3c836e1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts @@ -0,0 +1,1456 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2026, Val Packett + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include +#include +#include +#include +#include +#include +#include + +#include "sm7325.dtsi" +#include "pm7325.dtsi" +#include "pm7250b.dtsi" +#include "pm8350c.dtsi" /* PM7350C */ +#include "pmk8350.dtsi" /* PMK7325 */ + +/ { + model = "Motorola Edge 30"; + compatible = "motorola,dubai", "qcom,sm7325"; + chassis-type = "handset"; + + aliases { + bluetooth0 = &bluetooth; + serial0 = &uart5; + serial1 = &uart7; + wifi0 = &wifi; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer { + compatible = "simple-framebuffer"; + memory-region = <&framebuffer_mem>; + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&kypd_vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + pmic-glink { + compatible = "qcom,sm7325-pmic-glink", + "qcom,qcm6490-pmic-glink", + "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@ae000000 { + compatible = "ramoops"; + reg = <0x0 0xae000000 0x0 0xc0000>; + console-size = <0x40000>; + mem-type = <2>; + pmsg-size = <0x40000>; + record-size = <0x3f800>; + }; + + removed@c0000000 { + reg = <0x0 0xc0000000 0x0 0x5100000>; + no-map; + }; + + framebuffer_mem: framebuffer@e1000000 { + reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>; + no-map; + }; + + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + thermal-zones { + cam-flash-thermal { + thermal-sensors = <&pmk8350_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + chg-skin-thermal { + thermal-sensors = <&pm7250b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + chg-thermal { + thermal-sensors = <&pmk8350_adc_tm 4>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + thermal-sensors = <&pm7250b_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pa-1-thermal { + thermal-sensors = <&pmk8350_adc_tm 5>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pa-2-thermal { + thermal-sensors = <&pmk8350_adc_tm 6>; + + /* Reports negative temperature. */ + status = "disabled"; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + quiet-thermal { + thermal-sensors = <&pmk8350_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + thermal-sensors = <&pmk8350_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + + // S2B is really ebi.lvl but it's there for supply map completeness sake. + vreg_s2b_0p7: smpb2-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s2b_0p7"; + + regulator-min-microvolt = <65535>; + regulator-max-microvolt = <65535>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + wcn6750-pmu { + compatible = "qcom,wcn6750-pmu"; + pinctrl-0 = <&bt_en>; + pinctrl-names = "default"; + vddaon-supply = <&mos_0p95_aon_s10c>; + vddasd-supply = <&vreg_l11c_2p8>; + vddpmu-supply = <&mos_0p95_dig_s10c>; + vddio-supply = <&vdd18_io>; + vddrfa0p8-supply = <&vdd09_pmu_rfa_i>; + vddrfa1p2-supply = <&vdd13_pmu_rfa_i>; + vddrfa1p7-supply = <&vdd19_pmu_rfa_i>; + vddrfa2p2-supply = <&vdd22_wlpa_s1c>; + + bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p952>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_s2b_0p7>; + vdd-l5-supply = <&vreg_s2b_0p7>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p256>; + vdd-l8-supply = <&vreg_s7b_0p952>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p856>; + vdd-l13-supply = <&vreg_s7b_0p952>; + vdd-l14-l16-supply = <&vreg_s8b_1p256>; + + /* + * S2, L4-L5 are ARCs: + * S2 - ebi.lvl, + * L4 - lmx.lvl, + * l5 - lcx.lvl. + * + * L10 are unused. + */ + + vdd19_pmu_rfa_i: + vreg_s1b_1p856: smps1 { + regulator-name = "vreg_s1b_1p856"; + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + mos_0p95_aon_s10c: + mos_0p95_dig_s10c: + vdd09_pmu_rfa_i: + vreg_s7b_0p952: smps7 { + regulator-name = "vreg_s7b_0p952"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vdd13_pmu_rfa_i: + vreg_s8b_1p256: smps8 { + regulator-name = "vreg_s8b_1p256"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = ; + }; + + vreg_l1b_0p912: ldo1 { + regulator-name = "vreg_l1b_0p912"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = ; + }; + + vdd_a_usbhs_3p1: + vreg_l2b_3p072: ldo2 { + regulator-name = "vreg_l2b_3p072"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p6: ldo3 { + regulator-name = "vreg_l3b_0p6"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = ; + }; + + vdd_a_dsi_0_1p2: + vdd_a_ufs_0_1p2: + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8b_0p904: ldo8 { + regulator-name = "vreg_l8b_0p904"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l11b_1p776: ldo11 { + regulator-name = "vreg_l11b_1p776"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l12b_0p8: ldo12 { + regulator-name = "vreg_l12b_0p8"; + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = ; + }; + + vreg_l13b_0p8: ldo13 { + regulator-name = "vreg_l13b_0p8"; + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = ; + }; + + vreg_l14b_1p2: ldo14 { + regulator-name = "vreg_l14b_1p2"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l15b_0p88: ldo15 { + regulator-name = "vreg_l15b_0p88"; + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = ; + }; + + vreg_l16b_1p2: ldo16 { + regulator-name = "vreg_l16b_1p2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = ; + }; + + vreg_l17b_1p8: ldo17 { + regulator-name = "vreg_l17b_1p8"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = ; + }; + + vreg_l18b_1p8: ldo18 { + regulator-name = "vreg_l18b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + regulator-always-on; + regulator-boot-on; + }; + + vdd18_io: + vreg_l19b_1p8: ldo19 { + regulator-name = "vreg_l19b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1b_1p856>; + vdd-l2-l8-supply = <&vreg_s1b_1p856>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s7b_0p952>; + + vdd-bob-supply = <&vph_pwr>; + + /* + * S2, S5, S7, S10 are ARCs: + * S2 - cx.lvl, + * S5 - mss.lvl, + * S7 - gfx.lvl, + * S10 - mx.lvl. + */ + + vdd22_wlpa_s1c: + vreg_s1c_2p2: smps1 { + regulator-name = "vreg_s1c_2p2"; + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s9c_0p676: smps9 { + regulator-name = "vreg_s9c_0p676"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vdd_a_usbhs_1p8: + vdd_qfprom: + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + iovdd_ts: + vreg_l2c_1p8: ldo2 { + regulator-name = "vreg_l2c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdd_ts: + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8_3p0: ldo4 { + regulator-name = "vreg_l4c_1p8_3p0"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8_3p0: ldo5 { + regulator-name = "vreg_l5c_1p8_3p0"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l9c_3p3: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vdd_a_dsi_0_0p9: + vdd_a_ufs_0_core: + vdd_a_usbhs_core: + vreg_l10c_0p88: ldo10 { + regulator-name = "vreg_l10c_0p88"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l11c_2p8: ldo11 { + regulator-name = "vreg_l11c_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + disp_iovcc_1p8: + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + disp_vci_3p0: + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + audio_sw_vcc: + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; +}; + +&gcc { + protected-clocks = , + , + , + , + , + , + , + , + , + , + , + , + ; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sm7325/motorola/dubai/a660_zap.mbn"; +}; + +&i2c4 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 6 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&audio_sw_vcc>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; +}; + +&ipa { + firmware-name = "qcom/sm7325/motorola/dubai/yupik_ipa_fws.mbn"; + memory-region = <&ipa_fw_mem>; + + qcom,gsi-loader = "self"; + + status = "okay"; +}; + +&pm7250b_adc { + channel@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "chg_skin_therm"; + }; + + channel@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "conn_therm"; + }; +}; + +&pm7250b_adc_tm { + status = "okay"; + + chg-skin-therm@0 { + reg = <0>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm7250b_gpios { + gpio-line-names = "FG_ALERT_N", /* GPIO_1 */ + "SLAVECP_INT", + "NC", + "NC", + "NC", + "DOUBLER_STAT", + "NC", + "NC", + "NC", + "NC", /* GPIO_10 */ + "NC", + "NC"; +}; + +&pm7325_gpios { + gpio-line-names = "PA_THERM1", /* GPIO_1 */ + "NC", + "NC", + "PA_THERM2", + "CBL_PWR_N", + "KYPD_VOL_UP_N", + "NC", + "NC", + "NC", + "NC"; /* GPIO_10 */ + + kypd_vol_up_n: kypd-volp-n-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + power-source = <1>; + }; +}; + +&pm8350c_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; /* GPIO_9 */ +}; + +&pm8350c_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <400000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <400000>; + }; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + cam-flash-therm@2 { + reg = <2>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + sdm-skin-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + chg-therm@4 { + reg = <4>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-therm-1@5 { + reg = <5>; + io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-therm-2@6 { + reg = <6>; + io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pmk8350_gpios { + gpio-line-names = "NC", /* GPIO_0 */ + "NC", + "TP_PMK_GPIO_3", + "PMK_OPTION"; /* GPIO_4 */ +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pmk8350_vadc { + status = "okay"; + + channel@44 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_xo_therm"; + }; + + channel@144 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_quiet_therm"; + }; + + channel@145 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_cam_flash_therm"; + }; + + channel@146 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_sdm_skin_therm"; + }; + + channel@147 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_chg_therm"; + }; + + channel@14a { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_pa_therm1"; + }; + + channel@14d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_pa_therm2"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + + status = "okay"; +}; + +&qfprom { + vcc-supply = <&vdd_qfprom>; +}; + +&qup_spi13_cs { + drive-strength = <6>; + bias-pull-down; +}; + +&qup_spi13_data_clk { + drive-strength = <6>; + bias-pull-down; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm7325/motorola/dubai/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm7325/motorola/dubai/cdsp.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm7325/motorola/dubai/modem.mbn"; + + status = "okay"; +}; + +&remoteproc_wpss { + firmware-name = "qcom/sm7325/motorola/dubai/wpss.mbn"; + + status = "okay"; +}; + +&rmtfs_mem { + qcom,vmid = , + ; +}; + +&spi13 { + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupts-extended = <&tlmm 81 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 105 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vdd_ts>; + vddio-supply = <&iovdd_ts>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-0 = <&ts_int_n>, <&ts_reset_n>; + pinctrl-names = "default"; + }; +}; + +&tlmm { + gpio-line-names = "NC", /* GPIO_0 */ + "NC", + "NC", + "NC", + "SMARTPA_I2C_SDA", + "SMARTPA_I2C_SCK", + "AUD_4480_DET", + "AUD_4480_INT", + "FASTCHARGE_I2C_SDA", + "FASTCHARGE_I2C_SCL", + "SM_GPSLNA_EN_GPIO10", /* GPIO_10 */ + "NC", + "PERI_I2C_SDA", + "PERI_I2C_SCL", + "NC", + "NC", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "NC", + "DISP_LDO_EN", + "CAM_FW_RST_N", /* GPIO_20 */ + "CAM_RM_RST_N", + "DBG_UART_TXD", + "DBG_UART_RXD", + "TOPSB_INT_N", + "MCAM_LDO_EN", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "UART_BT_RTS_AP_CTS", + "UART_BT_CTS_AP_RTS", + "UART_BT_RX_AP_TX", /* GPIO_30 */ + "UART_BT_TX_AP_RX", + "FRONT_60M_INT", + "FRONT_60M_RST", + "FP_INT", + "FP_RST", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_SE_SPI_NREST", /* GPIO_40 */ + "NFC_IRQ", + "RF_LDO_GPIO42_EN", + "GOOGLE_KEY_INT", /* no such key exists */ + "DISP_RST_N", + "SB_INT_N", + "HAP_RST_N", + "HAP_INT", + "ESE_SPI_MISO", + "ESE_SPI_MOSI", + "ESE_SPI_CLK", /* GPIO_50 */ + "ESE_SPI_CS", + "TP_SPI_MISO", + "TP_SPI_MOSI", + "TP_SPI_CLK", + "TP_SPI_CS_N", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", + "FP_SPI_CS_N", + "HW_ID_1", /* GPIO_60 */ + "HW_ID_2", + "CAM_PMU_EN", + "WIDE_DVDD_LDO_EN", + "CAM_MCLK0", + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", /* GPIO_70 */ + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", + "CCI_I2C_SDA2", + "CCI_I2C_SCL2", + "CCI_I2C_SDA3", + "CCI_I2C_SCL3", + "CAM_RT_RST_N", + "CAM_RU_RST_N", + "FCAM_LDO_EN", + "DISP_TE", /* GPIO_80 */ + "TP_INT_N", + "FORCED_USB_BOOT", + "SM_CDC_RST_N", + "WLAN_EN", + "BT_EN", + "WCN_SW_CTRL", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "MOS_AS_EN", /* GPIO_90 */ + "NC", + "", + "NC", + "BT_FM_SLIMBUS_CLK", + "BT_FM_SLIMBUS_DATA", + "NC", + "RFCONN_DET_1", + "RF_CON_DET_2", + "RF_CON_DET_3", + "NC", /* GPIO_100 */ + "NC", + "NC", + "ACCEL_INT", + "NC", + "TP_RST_N", + "NC", + "NC", + "NC", + "UIM2_DATA", + "UIM2_CLK", /* GPIO_110 */ + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RESET", + "UIM1_PRESENT", + "SM_RFFE0_CLK", + "SM_RFFE0_DATA", + "SM_RFFE1_CLK", + "SM_RFFE1_DATA", /* GPIO_120 */ + "PA_MUTING", + "SM_GRFC5", + "LAA_RX", + "SM_GRFC7", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", + "WLAN_COEX_UART_RX", + "WLAN_COEX_UART_TX", + "NC", + "NC", /* GPIO_130 */ + "SM_GRFC12", + "NC", + "QLINK0_REQUEST", + "QLINK0_ENABLE", + "QLINK0_WMSS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "USB_CC_DIR", /* GPIO_140 */ + "SAR_INT_N", + "PROX_INT_N", + "", + "SM_SWR_TX_CLK", + "SM_SWR_TX_DATA0", + "SM_SWR_TX_DATA1", + "SM_SWR_RX_CLK", + "SM_SWR_RX_DATA0", + "SM_SWR_RX_DATA1", + "NC", /* GPIO_150 */ + "NC", + "NC", + "NC", + "SB_MI2S_SCK", + "SB_MI2S_WS", + "SB_MI2S_RXDAT_AP_TX", + "SB_MI2S_TXDAT_AP_RX", + "NC", + "SNS_I3C0_SDA", + "SNS_I3C0_SCL", /* GPIO_160 */ + "SSC_I2C4_SDA", + "SSC_I2C4_SCL", + "MAG_I2C_SDA", + "MAG_I2C_SCL", + "NC", + "NC", + "", + "", + "", + "", /* GPIO_170 */ + "SSC_BT_UART4_TX", + "SSC_BT_UART4_RX", + "NC", + "NC"; + gpio-reserved-ranges = <48 4>, /* SPI (eSE - embedded Secure Element) */ + <56 4>; /* SPI (fingerprint reader) */ + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + oled_reset_n: oled-reset-n-state { + pins = "gpio44"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + aw86224_reset_default: aw86224-reset-default-state { + pins = "gpio46"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + aw86224_int_default: aw86224-int-default-state { + pins = "gpio47"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + mdp_vsync_p: mdp-vsync-p-state { + pins = "gpio80"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_int_n: ts-int-n-state { + pins = "gpio81"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + bt_en: bt-en-state { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + ts_reset_n: ts-int-n-state { + pins = "gpio105"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&uart5 { + status = "okay"; +}; + +&uart7 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-1 = <&qup_uart7_sleep_cts>, + <&qup_uart7_sleep_rts>, + <&qup_uart7_sleep_tx>, + <&qup_uart7_sleep_rx>; + pinctrl-names = "default", + "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + + max-speed = <3200000>; + + qcom,local-bd-address-broken; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p96>; + vcc-max-microamp = <800000>; + + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdd_a_ufs_0_core>; + vdda-pll-supply = <&vdd_a_ufs_0_1p2>; + + status = "okay"; +}; + +&usb_1 { + /* USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; + maximum-speed = "high-speed"; + + /* Remove USB3 phy */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + + status = "okay"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vdd_a_usbhs_core>; + vdda18-supply = <&vdd_a_usbhs_1p8>; + vdda33-supply = <&vdd_a_usbhs_3p1>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sm7325/motorola/dubai/vpu20_1v.mbn"; + + status = "okay"; +}; + +&wifi { + qcom,calibration-variant = "Motorola_dubai"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 268ae0c..b37998c 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -1172,7 +1172,7 @@ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 03bf30b..56cb6e9 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2798,7 +2798,7 @@ status = "disabled"; - remoteproc_adsp_glink: glink-edge { + glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -5373,8 +5373,12 @@ ice: crypto@1d88000 { compatible = "qcom,sm8450-inline-crypto-engine", "qcom,inline-crypto-engine"; - reg = <0 0x01d88000 0 0x8000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + reg = <0 0x01d88000 0 0x18000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>; + clock-names = "core", + "iface"; + power-domains = <&gcc UFS_PHY_GDSC>; }; cryptobam: dma-controller@1dc4000 { diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 912525e..3962019 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -78,6 +79,13 @@ qcom,freq-domain = <&cpufreq_hw 0>; capacity-dmips-mhz = <326>; dynamic-power-coefficient = <251>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3 MASTER_EPSS_L3_APPS + &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; l2_0: l2-cache { compatible = "cache"; @@ -104,6 +112,13 @@ qcom,freq-domain = <&cpufreq_hw 0>; capacity-dmips-mhz = <326>; dynamic-power-coefficient = <251>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3 MASTER_EPSS_L3_APPS + &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; l2_100: l2-cache { compatible = "cache"; @@ -125,6 +140,13 @@ qcom,freq-domain = <&cpufreq_hw 0>; capacity-dmips-mhz = <326>; dynamic-power-coefficient = <251>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3 MASTER_EPSS_L3_APPS + &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; l2_200: l2-cache { compatible = "cache"; @@ -146,6 +168,13 @@ qcom,freq-domain = <&cpufreq_hw 1>; capacity-dmips-mhz = <693>; dynamic-power-coefficient = <447>; + operating-points-v2 = <&cpu3_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3 MASTER_EPSS_L3_APPS + &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; l2_300: l2-cache { compatible = "cache"; @@ -167,6 +196,13 @@ qcom,freq-domain = <&cpufreq_hw 1>; capacity-dmips-mhz = <693>; dynamic-power-coefficient = <447>; + operating-points-v2 = <&cpu3_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3 MASTER_EPSS_L3_APPS + &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; l2_400: l2-cache { compatible = "cache"; @@ -188,6 +224,13 @@ qcom,freq-domain = <&cpufreq_hw 1>; capacity-dmips-mhz = <693>; dynamic-power-coefficient = <447>; + operating-points-v2 = <&cpu3_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3 MASTER_EPSS_L3_APPS + &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; l2_500: l2-cache { compatible = "cache"; @@ -209,6 +252,13 @@ qcom,freq-domain = <&cpufreq_hw 1>; capacity-dmips-mhz = <693>; dynamic-power-coefficient = <447>; + operating-points-v2 = <&cpu3_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3 MASTER_EPSS_L3_APPS + &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; l2_600: l2-cache { compatible = "cache"; @@ -230,6 +280,13 @@ qcom,freq-domain = <&cpufreq_hw 2>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <1057>; + operating-points-v2 = <&cpu7_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3 MASTER_EPSS_L3_APPS + &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; l2_700: l2-cache { compatible = "cache"; @@ -397,6 +454,306 @@ reg = <0 0xa0000000 0 0>; }; + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>; + }; + + opp-441600000 { + opp-hz = /bits/ 64 <441600000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (384000 * 32)>; + }; + + opp-556800000 { + opp-hz = /bits/ 64 <556800000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>; + }; + + opp-672000000 { + opp-hz = /bits/ 64 <672000000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>; + }; + + opp-787200000 { + opp-hz = /bits/ 64 <787200000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (729600 * 32)>; + }; + + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (844800 * 32)>; + }; + + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (940800 * 32)>; + }; + + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (1056000 * 32)>; + }; + + opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (1152000 * 32)>; + }; + + opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (1267200 * 32)>; + }; + + opp-1459200000 { + opp-hz = /bits/ 64 <1459200000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (1267200 * 32)>; + }; + + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <(466000 * 16) (768000 * 4) (1478400 * 32)>; + }; + + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <(466000 * 16) (768000 * 4) (1478400 * 32)>; + }; + + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <(466000 * 16) (768000 * 4) (1478400 * 32)>; + }; + + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <(466000 * 16) (768000 * 4) (1689600 * 32)>; + }; + + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1804800 * 32)>; + }; + }; + + cpu3_opp_table: opp-table-cpu3 { + compatible = "operating-points-v2"; + opp-shared; + + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>; + }; + + opp-614400000 { + opp-hz = /bits/ 64 <614400000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>; + }; + + opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>; + }; + + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>; + }; + + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <(300000 * 16) (768000 * 4) (729600 * 32)>; + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <(300000 * 16) (768000 * 4) (729600 * 32)>; + }; + + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <(466000 * 16) (1555000 * 4) (940800 * 32)>; + }; + + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <(466000 * 16) (1555000 * 4) (940800 * 32)>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <(600000 * 16) (1708000 * 4) (1056000 * 32)>; + }; + + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <(600000 * 16) (1708000 * 4) (1056000 * 32)>; + }; + + opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <(600000 * 16) (1708000 * 4) (1267200 * 32)>; + }; + + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <(600000 * 16) (1708000 * 4) (1267200 * 32)>; + }; + + opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1267200 * 32)>; + }; + + opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2188800000 { + opp-hz = /bits/ 64 <2188800000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2457600000 { + opp-hz = /bits/ 64 <2457600000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2707200000 { + opp-hz = /bits/ 64 <2707200000>; + opp-peak-kBps = <(933000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1689600 * 32)>; + }; + }; + + cpu7_opp_table: opp-table-cpu7 { + compatible = "operating-points-v2"; + opp-shared; + + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>; + }; + + opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>; + }; + + opp-864000000 { + opp-hz = /bits/ 64 <864000000>; + opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + opp-peak-kBps = <(300000 * 16) (768000 * 4) (729600 * 32)>; + }; + + opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-peak-kBps = <(300000 * 16) (768000 * 4) (729600 * 32)>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-peak-kBps = <(466000 * 16) (1555000 * 4) (940800 * 32)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(466000 * 16) (1555000 * 4) (940800 * 32)>; + }; + + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-peak-kBps = <(600000 * 16) (1708000 * 4) (1056000 * 32)>; + }; + + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-peak-kBps = <(600000 * 16) (1708000 * 4) (1056000 * 32)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(600000 * 16) (1708000 * 4) (1267200 * 32)>; + }; + + opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + opp-peak-kBps = <(600000 * 16) (1708000 * 4) (1267200 * 32)>; + }; + + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1267200 * 32)>; + }; + + opp-2092800000 { + opp-hz = /bits/ 64 <2092800000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2476800000 { + opp-hz = /bits/ 64 <2476800000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1478400 * 32)>; + }; + + opp-2726400000 { + opp-hz = /bits/ 64 <2726400000>; + opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1478400 * 32)>; + }; + + opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1689600 * 32)>; + }; + + opp-2956800000 { + opp-hz = /bits/ 64 <2956800000>; + opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1689600 * 32)>; + }; + + opp-3187200000 { + opp-hz = /bits/ 64 <3187200000>; + opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1689600 * 32)>; + }; + }; + pmu-a510 { compatible = "arm,cortex-a510-pmu"; interrupts = ; @@ -2465,7 +2822,11 @@ "qcom,inline-crypto-engine"; reg = <0 0x01d88000 0 0x18000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>; + clock-names = "core", + "iface"; + power-domains = <&gcc UFS_PHY_GDSC>; }; tcsr_mutex: hwlock@1f40000 { @@ -2797,7 +3158,7 @@ status = "disabled"; - remoteproc_adsp_glink: glink-edge { + glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -5482,6 +5843,16 @@ }; }; + epss_l3: interconnect@17d90000 { + compatible = "qcom,sm8550-epss-l3", "qcom,epss-l3"; + reg = <0 0x17d90000 0 0x1000>; + + clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + cpufreq_hw: cpufreq@17d91000 { compatible = "qcom,sm8550-cpufreq-epss", "qcom,cpufreq-epss"; reg = <0 0x17d91000 0 0x1000>, diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 1604bc8..160ead2 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -4081,7 +4081,11 @@ "qcom,inline-crypto-engine"; reg = <0 0x01d88000 0 0x18000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>; + clock-names = "core", + "iface"; + power-domains = <&gcc UFS_PHY_GDSC>; }; cryptobam: dma-controller@1dc4000 { @@ -4486,7 +4490,7 @@ status = "disabled"; - remoteproc_adsp_glink: glink-edge { + glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi index 18fb52c..fafed41 100644 --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi @@ -5,6 +5,8 @@ #include #include +#include +#include #include #include #include @@ -42,6 +44,7 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd0>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; l2_0: l2-cache { compatible = "cache"; @@ -58,6 +61,7 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd1>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu2: cpu@200 { @@ -68,6 +72,7 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd2>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu3: cpu@300 { @@ -78,6 +83,7 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd3>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu4: cpu@400 { @@ -88,6 +94,7 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd4>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu5: cpu@500 { @@ -98,6 +105,7 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd5>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu6: cpu@10000 { @@ -108,6 +116,7 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd6>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; l2_1: l2-cache { compatible = "cache"; @@ -124,6 +133,7 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd7>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; + #cooling-cells = <2>; }; cpu-map { @@ -2074,6 +2084,23 @@ clocks = <&rpmhcc RPMH_IPA_CLK>; }; + cambistmclkcc: clock-controller@1760000 { + compatible = "qcom,sm8750-cambistmclkcc"; + reg = <0x0 0x1760000 0x0 0x6000>; + clocks = <&gcc GCC_CAM_BIST_MCLK_AHB_CLK>, + <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>; + power-domains = <&rpmhpd RPMHPD_MMCX>, + <&rpmhpd RPMHPD_MX>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mmss_noc: interconnect@1780000 { compatible = "qcom,sm8750-mmss-noc"; reg = <0x0 0x01780000 0x0 0x5b800>; @@ -2086,7 +2113,11 @@ "qcom,inline-crypto-engine"; reg = <0x0 0x01d88000 0x0 0x18000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>; + clock-names = "core", + "iface"; + power-domains = <&gcc GCC_UFS_PHY_GDSC>; }; cryptobam: dma-controller@1dc4000 { @@ -2217,7 +2248,7 @@ status = "disabled"; - remoteproc_adsp_glink: glink-edge { + glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -2763,6 +2794,7 @@ #clock-cells = <1>; #phy-cells = <1>; + mode-switch; orientation-switch; status = "disabled"; @@ -3313,7 +3345,7 @@ "dsi_pll"; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&bi_tcxo_div2>; clock-names = "iface", "ref"; @@ -3436,6 +3468,23 @@ #power-domain-cells = <1>; }; + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8750-camcc"; + reg = <0x0 0xade0000 0x0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>; + power-domains = <&rpmhpd RPMHPD_MMCX>, + <&rpmhpd RPMHPD_MXC>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8750-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>; @@ -5202,10 +5251,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, diff --git a/arch/arm64/boot/dts/qcom/talos-evk.dts b/arch/arm64/boot/dts/qcom/talos-evk.dts index af100e2..b7f514f 100644 --- a/arch/arm64/boot/dts/qcom/talos-evk.dts +++ b/arch/arm64/boot/dts/qcom/talos-evk.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "talos-evk-som.dtsi" +#include / { model = "Qualcomm QCS615 IQ 615 EVK"; @@ -40,6 +41,46 @@ }; }; + sound { + compatible = "qcom,qcs615-sndcard"; + model = "TALOS-EVK"; + + pinctrl-0 = <&mi2s1_pins>, <&mi2s_mclk>; + pinctrl-names = "default"; + + pri-mi2s-capture-dai-link { + link-name = "Primary MI2S Capture"; + + codec { + sound-dai = <&codec_da7212>; + }; + + cpu { + sound-dai = <&q6apmbedai PRIMARY_MI2S_TX>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + pri-mi2s-playback-dai-link { + link-name = "Primary MI2S Playback"; + + codec { + sound-dai = <&codec_da7212>; + }; + + cpu { + sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vreg_v1p8_out: regulator-v1p8-out { compatible = "regulator-fixed"; regulator-name = "vreg-v1p8-out"; @@ -109,6 +150,21 @@ }; }; +&i2c5 { + status = "okay"; + + codec_da7212: codec@1a { + compatible = "dlg,da7212"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&q6prmcc LPASS_CLK_ID_MCLK_2 LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk"; + VDDA-supply = <&vreg_v1p8_out>; + VDDIO-supply = <&vreg_v1p8_out>; + VDDMIC-supply = <&vreg_v3p3_out>; + }; +}; + &mdss_dsi0_out { remote-endpoint = <&adv7535_in>; data-lanes = <0 1 2 3>; diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi index ff5afbf..fb1bbc5 100644 --- a/arch/arm64/boot/dts/qcom/talos.dtsi +++ b/arch/arm64/boot/dts/qcom/talos.dtsi @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -531,6 +532,25 @@ }; + qspi_opp_table: opp-table-qspi { + compatible = "operating-points-v2"; + + opp-60000000 { + opp-hz = /bits/ 64 <60000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-133250000 { + opp-hz = /bits/ 64 <133250000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-266500000 { + opp-hz = /bits/ 64 <266500000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + qup_opp_table: opp-table-qup { compatible = "operating-points-v2"; @@ -1610,6 +1630,48 @@ bias-pull-up; }; + qspi_cs0: qspi-cs0-state { + pins = "gpio44"; + function = "qspi"; + bias-disable; + drive-strength = <6>; + }; + + qspi_data0123: qspi-data0123-state { + pins = "gpio45", "gpio46", "gpio47", "gpio49"; + function = "qspi"; + bias-pull-down; + drive-strength = <6>; + }; + + qspi_clk: qspi-clk-state { + pins = "gpio48"; + function = "qspi"; + bias-pull-down; + drive-strength = <6>; + }; + + qspi_cs1: qspi-cs1-state { + pins = "gpio50"; + function = "qspi"; + bias-pull-down; + drive-strength = <6>; + }; + + mi2s1_pins: mi2s1-state { + pins = "gpio108", "gpio109", "gpio110", "gpio111"; + function = "mi2s_1"; + drive-strength = <8>; + bias-disable; + }; + + mi2s_mclk: mi2s-mclk-state { + pins = "gpio122"; + function = "mclk2"; + drive-strength = <8>; + bias-disable; + }; + qup_i2c1_data_clk: qup-i2c1-data-clk-state { pins = "gpio4", "gpio5"; function = "qup0"; @@ -3896,6 +3958,39 @@ }; }; + qspi: spi@88df000 { + compatible = "qcom,qcs615-qspi", + "qcom,qspi-v1"; + reg = <0x0 0x088df000 0x0 0x1000>; + + interrupts = ; + + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", + "core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QSPI QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QSPI QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qspi-config", + "qspi-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qspi_opp_table>; + + iommus = <&apps_smmu 0x160 0x0>; + + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0123>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + dc_noc: interconnect@9160000 { reg = <0x0 0x09160000 0x0 0x3200>; compatible = "qcom,qcs615-dc-noc"; @@ -5132,6 +5227,45 @@ dma-coherent; }; }; + + gpr: gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = ; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = ; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1721 0x0>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = ; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi index b773a49..02708f2 100644 --- a/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi @@ -1452,7 +1452,7 @@ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; }; }; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi index 22470a9..7f5860d 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi @@ -128,7 +128,7 @@ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; diff --git a/arch/arm64/boot/dts/realtek/kent.dtsi b/arch/arm64/boot/dts/realtek/kent.dtsi index ae006ce..8d4293c 100644 --- a/arch/arm64/boot/dts/realtek/kent.dtsi +++ b/arch/arm64/boot/dts/realtek/kent.dtsi @@ -150,6 +150,26 @@ reg-shift = <2>; status = "disabled"; }; + + iso_pinctrl: pinctrl@4e000 { + compatible = "realtek,rtd1625-iso-pinctrl"; + reg = <0x4e000 0x1a4>; + }; + + main2_pinctrl: pinctrl@4f200 { + compatible = "realtek,rtd1625-main2-pinctrl"; + reg = <0x4f200 0x50>; + }; + + isom_pinctrl: pinctrl@146200 { + compatible = "realtek,rtd1625-isom-pinctrl"; + reg = <0x146200 0x34>; + }; + + ve4_pinctrl: pinctrl@14e000 { + compatible = "realtek,rtd1625-ve4-pinctrl"; + reg = <0x14e000 0x84>; + }; }; gic: interrupt-controller@ff100000 { diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index ca45d28..8bf155b 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -60,6 +60,7 @@ r8a77965-salvator-xs-panel-aa104xd12-dtbs := r8a77965-salvator-xs.dtb salvator-p dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a779md-geist.dtb dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle-function-expansion.dtbo diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi index 6b22cc0..9d55509 100644 --- a/arch/arm64/boot/dts/renesas/condor-common.dtsi +++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi @@ -168,6 +168,8 @@ reg = <0>; interrupts-extended = <&gpio4 23 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; }; }; diff --git a/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso index 90767d7..2ab7e94 100644 --- a/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso +++ b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso @@ -6,36 +6,5 @@ * Copyright 2021 Ideas on Board Oy */ -/dts-v1/; -/plugin/; - -&{/} { +#define RENESAS_LVDS_OUTPUT lvds1 #include "panel-aa104xd12.dtsi" -}; - -&{/panel} { - backlight = <&backlight>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds1_out>; - }; - }; -}; - -&lvds1 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - lvds1_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index c83c97d..f2f25fe 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -249,6 +249,8 @@ reg = <0>; interrupts-extended = <&gpio5 19 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; /* * TX clock internal delay mode is required for reliable * 1Gbps communication using the KSZ9031RNX phy present on @@ -435,7 +437,7 @@ }; }; - cs2000: clk-multiplier@4f { + cs2000: clock-controller@4f { #clock-cells = <0>; compatible = "cirrus,cs2000-cp"; reg = <0x4f>; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index aaedb1f..4b3775a 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -186,23 +186,6 @@ regulator-always-on; }; - rsnd_ak4613: sound { - compatible = "simple-audio-card"; - - simple-audio-card,name = "rsnd-ak4613"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcpu>; - simple-audio-card,frame-master = <&sndcpu>; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4613>; - }; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - }; - vbus0_usb2: regulator-vbus0-usb2 { compatible = "regulator-fixed"; @@ -260,6 +243,23 @@ states = <3300000 1>, <1800000 0>; }; + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rsnd-ak4613"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + }; + vga { compatible = "vga-connector"; @@ -322,6 +322,8 @@ reg = <0>; interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; /* * TX clock internal delay mode is required for reliable * 1Gbps communication using the KSZ9031RNX phy present on @@ -512,7 +514,7 @@ asahi-kasei,out6-single-end; }; - cs2000: clk-multiplier@4f { + cs2000: clock-controller@4f { #clock-cells = <0>; compatible = "cirrus,cs2000-cp"; reg = <0x4f>; diff --git a/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi b/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi index 2edb5cb..2744937 100644 --- a/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi +++ b/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi @@ -208,11 +208,13 @@ avb0_phy: ethernet-phy@0 { compatible = "ethernet-phy-id0022.1622", - "ethernet-phy-ieee802.3-c22"; - rxc-skew-ps = <1500>; - reg = <0>; - interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi index 8bfc66b..acce3c0 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi @@ -50,7 +50,7 @@ pinctrl-names = "default"; status = "okay"; - cs2000: clk-multiplier@4f { + cs2000: clock-controller@4f { #clock-cells = <0>; compatible = "cirrus,cs2000-cp"; reg = <0x4f>; diff --git a/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi b/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi index 4b1f098..11113a1 100644 --- a/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi +++ b/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi @@ -5,26 +5,52 @@ * Copyright (C) 2014 Renesas Electronics Corp. */ -panel { - compatible = "mitsubishi,aa104xd12", "panel-lvds"; - - width-mm = <210>; - height-mm = <158>; - data-mapping = "jeida-18"; - - panel-timing { - /* 1024x768 @65Hz */ - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hsync-len = <136>; - hfront-porch = <20>; - hback-porch = <160>; - vfront-porch = <3>; - vback-porch = <29>; - vsync-len = <6>; +/dts-v1/; +/plugin/; + +&{/} { + panel { + compatible = "mitsubishi,aa104xd12", "panel-lvds"; + backlight = <&backlight>; + + width-mm = <210>; + height-mm = <158>; + data-mapping = "jeida-18"; + + panel-timing { + /* 1024x768 @65Hz */ + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hsync-len = <136>; + hfront-porch = <20>; + hback-porch = <160>; + vfront-porch = <3>; + vback-porch = <29>; + vsync-len = <6>; + }; + + port { + lvds_panel_in: endpoint { + remote-endpoint = <&lvds_panel_out>; + }; + }; }; +}; + +&RENESAS_LVDS_OUTPUT { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; - port { + lvds_panel_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts index d5543f2..0d5c754 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts @@ -35,3 +35,7 @@ clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; + +&gpu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts index 9ebb47b..115cc47 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts @@ -35,3 +35,7 @@ clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; + +&gpu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts index 4bfeb1d..c328259 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts @@ -36,3 +36,7 @@ clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; + +&gpu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts index c7f1417..b35de49 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts @@ -40,3 +40,7 @@ clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; + +&gpu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts index 70cf926..0c0806c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts @@ -40,3 +40,7 @@ clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; + +&gpu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index b26c5a7..a2ad79d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -113,6 +113,8 @@ reg = <0>; interrupts-extended = <&gpio1 17 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 343f961..10c9a2e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -119,6 +119,8 @@ reg = <0>; interrupts-extended = <&gpio1 17 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index e372530..52462e6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -126,6 +126,8 @@ reg = <0>; interrupts-extended = <&gpio4 23 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index 6bd5807..ea5dcee 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -33,6 +33,8 @@ reg = <0>; interrupts-extended = <&gpio4 16 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779md-geist.dts b/arch/arm64/boot/dts/renesas/r8a779md-geist.dts new file mode 100644 index 0000000..0e47243 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779md-geist.dts @@ -0,0 +1,720 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the Geist board with R-Car M3Le + * + * Copyright (C) 2025-2026 Renesas Electronics Corp. + */ + +/dts-v1/; +#include +#include +#include "r8a779md.dtsi" + +/ { + model = "Renesas Geist board based on r8a779md"; + compatible = "renesas,geist", "renesas,r8a779md", "renesas,r8a77965"; + + aliases { + serial0 = &scif2; + serial1 = &hscif1; + ethernet0 = &avb; + mmc0 = &sdhi2; + mmc1 = &sdhi0; + }; + + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2500/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; + + brightness-levels = <256 128 64 16 8 4 0>; + default-brightness-level = <6>; + + power-supply = <®_12v>; + enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + + cvbs-in { + compatible = "composite-video-connector"; + label = "CVBS IN"; + + port { + cvbs_con: endpoint { + remote-endpoint = <&adv7482_ain7>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + label = "HDMI IN"; + type = "a"; + + port { + hdmi_in_con: endpoint { + remote-endpoint = <&adv7482_hdmi>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-1"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-2"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-3"; + wakeup-source; + debounce-interval = <20>; + }; + + key-4 { + gpios = <&gpio5 23 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-4"; + wakeup-source; + debounce-interval = <20>; + }; + + key-a { + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "TSW0"; + wakeup-source; + debounce-interval = <20>; + }; + + key-b { + gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "TSW1"; + wakeup-source; + debounce-interval = <20>; + }; + + key-c { + gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "TSW2"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_12v: regulator-12v { + compatible = "regulator-fixed"; + regulator-name = "fixed-12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + vbus0_usb2: regulator-vbus0-usb2 { + compatible = "regulator-fixed"; + + regulator-name = "USB20_VBUS0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; + + sound_card: sound { + compatible = "audio-graph-card"; + + label = "rcar-sound"; + dais = <&rsnd_port0>; /* AK4619 Audio Codec */ + }; + + x12_clk: x12-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + /* External DU dot clocks */ + x21_clk: x21-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x22_clk: x22-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x23_clk: x23-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + x3013_clk: x3013-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; +}; + +&csi40 { + status = "okay"; + + ports { + port@0 { + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7482_txa>; + }; + }; + }; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + /* Please only enable hscif1 or scif1 */ + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + clock-frequency = <100000>; + status = "okay"; + + ak4619: codec@10 { + compatible = "asahi-kasei,ak4619"; + reg = <0x10>; + clocks = <&rcar_sound 3>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + ak4619_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint0>; + }; + }; + }; + + /* Pin-to-pin, register map, and control compatible with CS2000 and CS2200 */ + cs2500: clock-controller@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2500", "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2500>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + versaclock3: clock-controller@68 { + compatible = "renesas,5p35023"; + reg = <0x68>; + #clock-cells = <1>; + clocks = <&x3013_clk>; + assigned-clocks = <&versaclock3 4>, <&versaclock3 5>; + assigned-clock-rates = <100000000>, <100000000>; + }; + + versaclock5: clock-controller@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x23_clk>; + clock-names = "xin"; + }; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 + 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb" ; + + interrupts-extended = <&gpio6 30 IRQ_TYPE_LEVEL_LOW>, + <&gpio6 31 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "intrq1", "intrq2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_con>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; + }; + + port@a { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; + + csa_vdd: adc@7c { + compatible = "maxim,max9611"; + reg = <0x7c>; + + shunt-resistor-micro-ohms = <5000>; + }; + + csa_dvfs: adc@7f { + compatible = "maxim,max9611"; + reg = <0x7f>; + + shunt-resistor-micro-ohms = <5000>; + }; +}; + +&i2c_dvfs { + status = "okay"; + + clock-frequency = <400000>; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&pcie_bus_clk { + status = "disabled"; +}; + +&pciec0 { + clocks = <&cpg CPG_MOD 319>, <&versaclock3 4>; + status = "okay"; +}; + +&pciec0_rp { + clocks = <&versaclock3 5>; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_mdio", "avb_mii"; + function = "avb"; + }; + + pins_mdio { + groups = "avb_mdio"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; + + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + + keys_pins: keys { + pins = "GP_5_17", "GP_5_20", "GP_5_22"; + bias-pull-up; + }; + + pwm1_pins: pwm1 { + groups = "pwm1_a"; + function = "pwm1"; + }; + + scif1_pins: scif1 { + groups = "scif1_data_a", "scif1_ctrl"; + function = "scif1"; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; + function = "sdhi2"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout3_a"; + function = "audio_clk"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; +}; + +&pwm1 { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + status = "okay"; + + /* update to */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2500>, + <&audio_clk_c>, + <&cpg CPG_MOD 922>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + rsnd_port0: port@0 { + reg = <0>; + + rsnd_endpoint0: endpoint { + remote-endpoint = <&ak4619_endpoint>; + dai-format = "left_j"; + bitclock-master = <&rsnd_endpoint0>; + frame-master = <&rsnd_endpoint0>; + playback = <&ssi0>, <&src0>, <&dvc0>; + capture = <&ssi1>, <&src1>, <&dvc1>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + /* Please only enable hscif1 or scif1 */ + /* status = "okay"; */ +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + fixed-emmc-driver-type = <1>; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&usb_extal_clk { + clock-frequency = <50000000>; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&vin0 { + status = "okay"; +}; + +&vin1 { + status = "okay"; +}; + +&vin2 { + status = "okay"; +}; + +&vin3 { + status = "okay"; +}; + +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&vin6 { + status = "okay"; +}; + +&vin7 { + status = "okay"; +}; + +&vspb { + status = "okay"; +}; + +&vspi0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779md.dtsi b/arch/arm64/boot/dts/renesas/r8a779md.dtsi new file mode 100644 index 0000000..f306541 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779md.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car M3Le (R8A779MD) SoC + * + * Copyright (C) 2025-2026 Renesas Electronics Corp. + */ + +#include "r8a77965.dtsi" + +/ { + compatible = "renesas,r8a779md", "renesas,r8a77965"; +}; + +/delete-node/ &csi20; +/delete-node/ &drif00; +/delete-node/ &drif01; +/delete-node/ &drif10; +/delete-node/ &drif11; +/delete-node/ &drif20; +/delete-node/ &drif21; +/delete-node/ &drif30; +/delete-node/ &drif31; +/delete-node/ &du; +/delete-node/ &ehci1; +/delete-node/ &hdmi0; +/delete-node/ &lvds0; +/delete-node/ &mlp; +/delete-node/ &ohci1; +/delete-node/ &pciec1; +/delete-node/ &sata; +/delete-node/ &usb2_phy1; +/delete-node/ &usb3_peri0; +/delete-node/ &usb3_phy0; +/delete-node/ &vin0csi20; +/delete-node/ &vin1csi20; +/delete-node/ &vin2csi20; +/delete-node/ &vin3csi20; +/delete-node/ &vin4csi20; +/delete-node/ &vin5csi20; +/delete-node/ &vin6csi20; +/delete-node/ &vin7csi20; +/delete-node/ &xhci0; + +&sdhi0 { + compatible = "renesas,sdhi-r8a779md", "renesas,rcar-gen3-sdhi"; +}; + +&sdhi1 { + compatible = "renesas,sdhi-r8a779md", "renesas,rcar-gen3-sdhi"; +}; + +&sdhi2 { + compatible = "renesas,sdhi-r8a779md", "renesas,rcar-gen3-sdhi"; +}; + +&sdhi3 { + compatible = "renesas,sdhi-r8a779md", "renesas,rcar-gen3-sdhi"; + no-mmc; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts b/arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts index a721734..d2b3fc0 100644 --- a/arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts +++ b/arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include #include "r8a78000.dtsi" / { @@ -20,10 +21,22 @@ stdout-path = "serial0:1843200n8"; }; - memory@60600000 { + firmware { + scmi: scmi { + compatible = "arm,scmi"; + mboxes = <&mfis_scp 2 MFIS_CHANNEL_TX>, + <&mfis_scp 2 MFIS_CHANNEL_RX>; + mbox-names = "tx", "rx"; + shmem = <&scmi_tx_shmem>, <&scmi_rx_shmem>; + arm,no-completion-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + memory@40000000 { device_type = "memory"; - /* first 518MiB is reserved for other purposes. */ - reg = <0x0 0x60600000 0x0 0x5fa00000>; + reg = <0x0 0x40000000 0x0 0x80000000>; }; memory@1080000000 { @@ -65,6 +78,36 @@ device_type = "memory"; reg = <0x1e 0x00000000 0x1 0x00000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* First 518 MiB is reserved for other purposes. */ + firmware@40000000 { + reg = <0x0 0x40000000 0x0 0x20600000>; + no-map; + }; + + /* Parameters set by IPL. */ + parameters@8c100000 { + reg = <0x0 0x8c100000 0x0 0x00008000>; + no-map; + }; + + /* TFA BL31. */ + tfa-bl31@8c200000 { + reg = <0x0 0x8c200000 0x0 0x00080000>; + no-map; + }; + + /* TEE TZ DRAM. */ + tee@8c400000 { + reg = <0x0 0x8c400000 0x0 0x02000000>; + no-map; + }; + }; }; &extal_clk { @@ -80,6 +123,22 @@ status = "okay"; }; +&mfis_scp { + status = "okay"; +}; + &scif_clk { clock-frequency = <26000000>; }; + +&stcm_transport { + scmi_tx_shmem: sram@1200 { + compatible = "arm,scmi-shmem"; + reg = <0x1200 0x0100>; + }; + + scmi_rx_shmem: sram@1300 { + compatible = "arm,scmi-shmem"; + reg = <0x1300 0x100>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a78000.dtsi b/arch/arm64/boot/dts/renesas/r8a78000.dtsi index 3ec1b53..7780fb4 100644 --- a/arch/arm64/boot/dts/renesas/r8a78000.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a78000.dtsi @@ -665,6 +665,11 @@ /* clock-frequency must be set on board */ }; + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif-clk { compatible = "fixed-clock"; @@ -678,9 +683,123 @@ #size-cells = <2>; ranges; - prr: chipid@189e0044 { - compatible = "renesas,prr"; - reg = <0 0x189e0044 0 4>; + mfis: system-controller@189e0000 { + compatible = "renesas,r8a78000-mfis"; + reg = <0 0x189e0000 0 0x1000>, <0 0x18800000 0 0x40000>; + reg-names = "common", "mboxes"; + interrupts = , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , ; + interrupt-names = "ch0i", "ch0e", "ch1i", "ch1e", "ch2i", "ch2e", "ch3i", "ch3e", + "ch4i", "ch4e", "ch5i", "ch5e", "ch6i", "ch6e", "ch7i", "ch7e", + "ch8i", "ch8e", "ch9i", "ch9e", "ch10i", "ch10e", "ch11i", "ch11e", + "ch12i", "ch12e", "ch13i", "ch13e", "ch14i", "ch14e", "ch15i", "ch15e", + "ch16i", "ch16e", "ch17i", "ch17e", "ch18i", "ch18e", "ch19i", "ch19e", + "ch20i", "ch20e", "ch21i", "ch21e", "ch22i", "ch22e", "ch23i", "ch23e", + "ch24i", "ch24e", "ch25i", "ch25e", "ch26i", "ch26e", "ch27i", "ch27e", + "ch28i", "ch28e", "ch29i", "ch29e", "ch30i", "ch30e", "ch31i", "ch31e", + "ch32i", "ch32e", "ch33i", "ch33e", "ch34i", "ch34e", "ch35i", "ch35e", + "ch36i", "ch36e", "ch37i", "ch37e", "ch38i", "ch38e", "ch39i", "ch39e", + "ch40i", "ch40e", "ch41i", "ch41e", "ch42i", "ch42e", "ch43i", "ch43e", + "ch44i", "ch44e", "ch45i", "ch45e", "ch46i", "ch46e", "ch47i", "ch47e", + "ch48i", "ch48e", "ch49i", "ch49e", "ch50i", "ch50e", "ch51i", "ch51e", + "ch52i", "ch52e", "ch53i", "ch53e", "ch54i", "ch54e", "ch55i", "ch55e", + "ch56i", "ch56e", "ch57i", "ch57e", "ch58i", "ch58e", "ch59i", "ch59e", + "ch60i", "ch60e", "ch61i", "ch61e", "ch62i", "ch62e", "ch63i", "ch63e"; + #mbox-cells = <2>; + #hwlock-cells = <1>; + status = "disabled"; + }; + + mfis_scp: system-controller@189e1000 { + compatible = "renesas,r8a78000-mfis-scp"; + reg = <0 0x189e1000 0 0x1000>, <0 0x18840000 0 0x2c000>; + reg-names = "common", "mboxes"; + interrupts = , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , ; + /* SCP uses I side IRQ only */ + interrupt-names = "ch0i", "ch1i", "ch2i", "ch3i", "ch4i", "ch5i", "ch6i", "ch7i", + "ch8i", "ch9i", "ch10i", "ch11i", "ch12i", "ch13i", "ch14i", "ch15i", + "ch16i", "ch17i", "ch18i", "ch19i", "ch20i", "ch21i", "ch22i", "ch23i", + "ch24i", "ch25i", "ch26i", "ch27i", "ch28i", "ch29i", "ch30i", "ch31i"; + #mbox-cells = <2>; + #hwlock-cells = <1>; + status = "disabled"; }; /* Application Processors manage View-1 of a GIC-720AE */ @@ -689,8 +808,40 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0 0x39000000 0 0x10000>, - <0 0x39080000 0 0x800000>; + #redistributor-regions = <32>; + reg = <0x0 0x39000000 0x0 0x10000>, + <0x0 0x39080000 0x0 0x40000>, + <0x0 0x390c0000 0x0 0x40000>, + <0x0 0x39100000 0x0 0x40000>, + <0x0 0x39140000 0x0 0x40000>, + <0x0 0x39180000 0x0 0x40000>, + <0x0 0x391c0000 0x0 0x40000>, + <0x0 0x39200000 0x0 0x40000>, + <0x0 0x39240000 0x0 0x40000>, + <0x0 0x39280000 0x0 0x40000>, + <0x0 0x392c0000 0x0 0x40000>, + <0x0 0x39300000 0x0 0x40000>, + <0x0 0x39340000 0x0 0x40000>, + <0x0 0x39380000 0x0 0x40000>, + <0x0 0x393c0000 0x0 0x40000>, + <0x0 0x39400000 0x0 0x40000>, + <0x0 0x39440000 0x0 0x40000>, + <0x0 0x39480000 0x0 0x40000>, + <0x0 0x394c0000 0x0 0x40000>, + <0x0 0x39500000 0x0 0x40000>, + <0x0 0x39540000 0x0 0x40000>, + <0x0 0x39580000 0x0 0x40000>, + <0x0 0x395c0000 0x0 0x40000>, + <0x0 0x39600000 0x0 0x40000>, + <0x0 0x39640000 0x0 0x40000>, + <0x0 0x39680000 0x0 0x40000>, + <0x0 0x396c0000 0x0 0x40000>, + <0x0 0x39700000 0x0 0x40000>, + <0x0 0x39740000 0x0 0x40000>, + <0x0 0x39780000 0x0 0x40000>, + <0x0 0x397c0000 0x0 0x40000>, + <0x0 0x39800000 0x0 0x40000>, + <0x0 0x39840000 0x0 0x40000>; interrupts = ; }; @@ -773,6 +924,15 @@ clock-names = "fck", "brg_int", "scif_clk"; status = "disabled"; }; + + stcm_transport: sram@c1060000 { + compatible = "mmio-sram"; + reg = <0x0 0xc1060000 0x0 0x1c00>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xc1060000 0x1c00>; + /* actual transport nodes must be set per board file */ + }; }; timer { diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index 593c66b..6c4b2da 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -120,8 +120,7 @@ , , , - , - ; + ; interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0", "tgif0", "tgia1", "tgib1", "tciv1", "tciu1", @@ -136,7 +135,7 @@ "tgia7", "tgib7", "tgic7", "tgid7", "tciv7", "tgia8", "tgib8", "tgic8", "tgid8", - "tciv8", "tciu8"; + "tciv8"; clocks = <&cpg CPG_MOD R9A07G043_MTU_X_MCK_MTU3>; power-domains = <&cpg>; resets = <&cpg R9A07G043_MTU_X_PRESET_MTU3>; @@ -604,6 +603,7 @@ resets = <&cpg R9A07G043_GPIO_RSTN>, <&cpg R9A07G043_GPIO_PORT_RESETN>, <&cpg R9A07G043_GPIO_SPARE_RESETN>; + reset-names = "rstn", "port", "spare"; }; dmac: dma-controller@11820000 { @@ -655,6 +655,7 @@ <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK2>, <&cpg CPG_MOD R9A07G043_SDHI0_ACLK>; clock-names = "core", "clkh", "cd", "aclk"; + max-frequency = <133333333>; resets = <&cpg R9A07G043_SDHI0_IXRST>; power-domains = <&cpg>; status = "disabled"; @@ -671,6 +672,7 @@ <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK2>, <&cpg CPG_MOD R9A07G043_SDHI1_ACLK>; clock-names = "core", "clkh", "cd", "aclk"; + max-frequency = <133333333>; resets = <&cpg R9A07G043_SDHI1_IXRST>; power-domains = <&cpg>; status = "disabled"; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 29273da..2ced800 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -220,8 +220,7 @@ , , , - , - ; + ; interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0", "tgif0", "tgia1", "tgib1", "tciv1", "tciu1", @@ -236,7 +235,7 @@ "tgia7", "tgib7", "tgic7", "tgid7", "tciv7", "tgia8", "tgib8", "tgic8", "tgid8", - "tciv8", "tciu8"; + "tciv8"; clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; power-domains = <&cpg>; resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; @@ -505,6 +504,8 @@ "bri", "dri", "tei"; clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>; clock-names = "fck"; + dmas = <&dmac 0x4e79>, <&dmac 0x4e7a>; + dma-names = "tx", "rx"; power-domains = <&cpg>; resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>; status = "disabled"; @@ -523,6 +524,8 @@ "bri", "dri", "tei"; clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>; clock-names = "fck"; + dmas = <&dmac 0x4e7d>, <&dmac 0x4e7e>; + dma-names = "tx", "rx"; power-domains = <&cpg>; resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>; status = "disabled"; @@ -541,6 +544,8 @@ "bri", "dri", "tei"; clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>; clock-names = "fck"; + dmas = <&dmac 0x4e81>, <&dmac 0x4e82>; + dma-names = "tx", "rx"; power-domains = <&cpg>; resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>; status = "disabled"; @@ -559,6 +564,8 @@ "bri", "dri", "tei"; clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>; clock-names = "fck"; + dmas = <&dmac 0x4e85>, <&dmac 0x4e86>; + dma-names = "tx", "rx"; power-domains = <&cpg>; resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>; status = "disabled"; @@ -577,6 +584,8 @@ "bri", "dri", "tei"; clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>; clock-names = "fck"; + dmas = <&dmac 0x4e89>, <&dmac 0x4e8a>; + dma-names = "tx", "rx"; power-domains = <&cpg>; resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>; status = "disabled"; @@ -1017,6 +1026,7 @@ resets = <&cpg R9A07G044_GPIO_RSTN>, <&cpg R9A07G044_GPIO_PORT_RESETN>, <&cpg R9A07G044_GPIO_SPARE_RESETN>; + reset-names = "rstn", "port", "spare"; }; irqc: interrupt-controller@110a0000 { @@ -1174,6 +1184,7 @@ <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>, <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>; clock-names = "core", "clkh", "cd", "aclk"; + max-frequency = <133333333>; resets = <&cpg R9A07G044_SDHI0_IXRST>; power-domains = <&cpg>; status = "disabled"; @@ -1190,6 +1201,7 @@ <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>, <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>; clock-names = "core", "clkh", "cd", "aclk"; + max-frequency = <133333333>; resets = <&cpg R9A07G044_SDHI1_IXRST>; power-domains = <&cpg>; status = "disabled"; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 0dee48c..f689996 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -220,8 +220,7 @@ , , , - , - ; + ; interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0", "tgif0", "tgia1", "tgib1", "tciv1", "tciu1", @@ -236,7 +235,7 @@ "tgia7", "tgib7", "tgic7", "tgid7", "tciv7", "tgia8", "tgib8", "tgic8", "tgid8", - "tciv8", "tciu8"; + "tciv8"; clocks = <&cpg CPG_MOD R9A07G054_MTU_X_MCK_MTU3>; power-domains = <&cpg>; resets = <&cpg R9A07G054_MTU_X_PRESET_MTU3>; @@ -1025,6 +1024,7 @@ resets = <&cpg R9A07G054_GPIO_RSTN>, <&cpg R9A07G054_GPIO_PORT_RESETN>, <&cpg R9A07G054_GPIO_SPARE_RESETN>; + reset-names = "rstn", "port", "spare"; }; irqc: interrupt-controller@110a0000 { @@ -1182,6 +1182,7 @@ <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK2>, <&cpg CPG_MOD R9A07G054_SDHI0_ACLK>; clock-names = "core", "clkh", "cd", "aclk"; + max-frequency = <133333333>; resets = <&cpg R9A07G054_SDHI0_IXRST>; power-domains = <&cpg>; status = "disabled"; @@ -1198,6 +1199,7 @@ <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK2>, <&cpg CPG_MOD R9A07G054_SDHI1_ACLK>; clock-names = "core", "clkh", "cd", "aclk"; + max-frequency = <133333333>; resets = <&cpg R9A07G054_SDHI1_IXRST>; power-domains = <&cpg>; status = "disabled"; diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi index 997e6cf..3a69bb2 100644 --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi @@ -533,6 +533,7 @@ resets = <&cpg R9A08G045_GPIO_RSTN>, <&cpg R9A08G045_GPIO_PORT_RESETN>, <&cpg R9A08G045_GPIO_SPARE_RESETN>; + reset-names = "rstn", "port", "spare"; }; irqc: interrupt-controller@11050000 { diff --git a/arch/arm64/boot/dts/renesas/r9a08g046.dtsi b/arch/arm64/boot/dts/renesas/r9a08g046.dtsi index 28b0c75..03bdee8 100644 --- a/arch/arm64/boot/dts/renesas/r9a08g046.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a08g046.dtsi @@ -14,6 +14,56 @@ #size-cells = <2>; interrupt-parent = <&gic>; + audio_clk1: audio1-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it. */ + clock-frequency = <0>; + }; + + audio_clk2: audio2-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it. */ + clock-frequency = <0>; + }; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + + opp-37500000 { + opp-hz = /bits/ 64 <37500000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -24,6 +74,8 @@ device_type = "cpu"; next-level-cache = <&L3_CA55>; enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A08G046_CLK_IC0>; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@100 { @@ -32,6 +84,8 @@ device_type = "cpu"; next-level-cache = <&L3_CA55>; enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A08G046_CLK_IC1>; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@200 { @@ -40,6 +94,8 @@ device_type = "cpu"; next-level-cache = <&L3_CA55>; enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A08G046_CLK_IC2>; + operating-points-v2 = <&cluster0_opp>; }; cpu3: cpu@300 { @@ -48,6 +104,8 @@ device_type = "cpu"; next-level-cache = <&L3_CA55>; enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A08G046_CLK_IC3>; + operating-points-v2 = <&cluster0_opp>; }; L3_CA55: cache-controller-0 { @@ -122,11 +180,266 @@ status = "disabled"; }; + scif1: serial@100ac400 { + compatible = "renesas,scif-r9a08g046", "renesas,scif-r9a07g044"; + reg = <0 0x100ac400 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A08G046_SCIF1_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_SCIF1_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif2: serial@1004c000 { + compatible = "renesas,scif-r9a08g046", "renesas,scif-r9a07g044"; + reg = <0 0x1004c000 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A08G046_SCIF2_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_SCIF2_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif3: serial@1004c400 { + compatible = "renesas,scif-r9a08g046", "renesas,scif-r9a07g044"; + reg = <0 0x1004c400 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A08G046_SCIF3_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_SCIF3_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif4: serial@1004c800 { + compatible = "renesas,scif-r9a08g046", "renesas,scif-r9a07g044"; + reg = <0 0x1004c800 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A08G046_SCIF4_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_SCIF4_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif5: serial@1004e000 { + compatible = "renesas,scif-r9a08g046", "renesas,scif-r9a07g044"; + reg = <0 0x1004e000 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A08G046_SCIF5_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_SCIF5_RST_SYSTEM_N>; + status = "disabled"; + }; + i2c0: i2c@100ae000 { + compatible = "renesas,riic-r9a08g046", "renesas,riic-r9a09g057"; reg = <0 0x100ae000 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A08G046_I2C0_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A08G046_I2C0_MRST>; + power-domains = <&cpg>; #address-cells = <1>; #size-cells = <0>; - /* placeholder */ + status = "disabled"; + }; + + i2c1: i2c@10090400 { + compatible = "renesas,riic-r9a08g046", "renesas,riic-r9a09g057"; + reg = <0 0x10090400 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A08G046_I2C1_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A08G046_I2C1_MRST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@10090800 { + compatible = "renesas,riic-r9a08g046", "renesas,riic-r9a09g057"; + reg = <0 0x10090800 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A08G046_I2C2_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A08G046_I2C2_MRST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@10090c00 { + compatible = "renesas,riic-r9a08g046", "renesas,riic-r9a09g057"; + reg = <0 0x10090c00 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A08G046_I2C3_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A08G046_I2C3_MRST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rsci0: serial@100b8000 { + compatible = "renesas,r9a08g046-rsci"; + reg = <0 0x100b8000 0 0x1000>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", "tei", + "aed", "bfd"; + clocks = <&cpg CPG_MOD R9A08G046_RSCI0_TCLK>, + <&cpg CPG_MOD R9A08G046_RSCI0_PCLK>; + clock-names = "operation", "bus"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_RSCI0_PRESETN>, + <&cpg R9A08G046_RSCI0_TRESETN>; + reset-names = "presetn", "tresetn"; + status = "disabled"; + }; + + rsci1: serial@100f1000 { + compatible = "renesas,r9a08g046-rsci"; + reg = <0 0x100f1000 0 0x1000>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", "tei", + "aed", "bfd"; + clocks = <&cpg CPG_MOD R9A08G046_RSCI1_TCLK>, + <&cpg CPG_MOD R9A08G046_RSCI1_PCLK>; + clock-names = "operation", "bus"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_RSCI1_PRESETN>, + <&cpg R9A08G046_RSCI1_TRESETN>; + reset-names = "presetn", "tresetn"; + status = "disabled"; + }; + + rsci2: serial@100f2000 { + compatible = "renesas,r9a08g046-rsci"; + reg = <0 0x100f2000 0 0x1000>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", "tei", + "aed", "bfd"; + clocks = <&cpg CPG_MOD R9A08G046_RSCI2_TCLK>, + <&cpg CPG_MOD R9A08G046_RSCI2_PCLK>; + clock-names = "operation", "bus"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_RSCI2_PRESETN>, + <&cpg R9A08G046_RSCI2_TRESETN>; + reset-names = "presetn", "tresetn"; + status = "disabled"; + }; + + rsci3: serial@100f3000 { + compatible = "renesas,r9a08g046-rsci"; + reg = <0 0x100f3000 0 0x1000>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", "tei", + "aed", "bfd"; + clocks = <&cpg CPG_MOD R9A08G046_RSCI3_TCLK>, + <&cpg CPG_MOD R9A08G046_RSCI3_PCLK>; + clock-names = "operation", "bus"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_RSCI3_PRESETN>, + <&cpg R9A08G046_RSCI3_TRESETN>; + reset-names = "presetn", "tresetn"; + status = "disabled"; }; canfd: can@100c0000 { @@ -134,6 +447,82 @@ /* placeholder */ }; + ssi0: ssi@100e4000 { + compatible = "renesas,r9a08g046-ssi", "renesas,rz-ssi"; + reg = <0 0x100e4000 0 0x400>; + interrupts = , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx"; + clocks = <&cpg CPG_MOD R9A08G046_SSI0_PCLK2>, + <&cpg CPG_MOD R9A08G046_SSI0_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A08G046_SSI0_RST_M2_REG>; + dmas = <&dmac 0x2665>, <&dmac 0x2666>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi1: ssi@100e4400 { + compatible = "renesas,r9a08g046-ssi", "renesas,rz-ssi"; + reg = <0 0x100e4400 0 0x400>; + interrupts = , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx"; + clocks = <&cpg CPG_MOD R9A08G046_SSI1_PCLK2>, + <&cpg CPG_MOD R9A08G046_SSI1_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A08G046_SSI1_RST_M2_REG>; + dmas = <&dmac 0x2669>, <&dmac 0x266a>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi2: ssi@100e4800 { + compatible = "renesas,r9a08g046-ssi", "renesas,rz-ssi"; + reg = <0 0x100e4800 0 0x400>; + interrupts = , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx"; + clocks = <&cpg CPG_MOD R9A08G046_SSI2_PCLK2>, + <&cpg CPG_MOD R9A08G046_SSI2_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A08G046_SSI2_RST_M2_REG>; + dmas = <&dmac 0x266d>, <&dmac 0x266e>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi3: ssi@100e4c00 { + compatible = "renesas,r9a08g046-ssi", "renesas,rz-ssi"; + reg = <0 0x100e4c00 0 0x400>; + interrupts = , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx"; + clocks = <&cpg CPG_MOD R9A08G046_SSI3_PCLK2>, + <&cpg CPG_MOD R9A08G046_SSI3_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A08G046_SSI3_RST_M2_REG>; + dmas = <&dmac 0x2671>, <&dmac 0x2672>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a08g046-cpg"; reg = <0 0x11010000 0 0x10000>; @@ -160,10 +549,148 @@ }; pinctrl: pinctrl@11030000 { + compatible = "renesas,r9a08g046-pinctrl"; reg = <0 0x11030000 0 0x10000>; gpio-controller; #gpio-cells = <2>; - /* placeholder */ + gpio-ranges = <&pinctrl 0 0 232>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu>; + clocks = <&cpg CPG_MOD R9A08G046_GPIO_HCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_GPIO_RSTN>, + <&cpg R9A08G046_GPIO_PORT_RESETN>, + <&cpg R9A08G046_GPIO_SPARE_RESETN>; + reset-names = "rstn", "port", "spare"; + renesas,clonech = <&sysc 0xe2c>; + }; + + icu: interrupt-controller@11050000 { + compatible = "renesas,r9a08g046-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x11050000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "nmi", + "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "irq8", "irq9", "irq10", "irq11", + "irq12", "irq13", "irq14", "irq15", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", "ec7tiovf-0", + "ovfunf0", "ovfunf1", "ovfunf2", "ovfunf3", + "ovfunf4", "ovfunf5", "ovfunf6", "ovfunf7"; + clocks = <&cpg CPG_MOD R9A08G046_IA55_CLK>, + <&cpg CPG_MOD R9A08G046_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_IA55_RESETN>; + }; + + dmac: dma-controller@11820000 { + compatible = "renesas,r9a08g046-dmac", "renesas,rz-dmac"; + reg = <0 0x11820000 0 0x10000>, + <0 0x11830000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD R9A08G046_DMAC_ACLK>, + <&cpg CPG_MOD R9A08G046_DMAC_PCLK>; + clock-names = "main", "register"; + power-domains = <&cpg>; + resets = <&cpg R9A08G046_DMAC_ARESETN>, + <&cpg R9A08G046_DMAC_RST_ASYNC>; + reset-names = "arst", "rst_async"; + #dma-cells = <1>; + dma-channels = <16>; }; sdhi1: mmc@11c10000 { @@ -171,6 +698,240 @@ /* placeholder */ }; + eth0: ethernet@11c30000 { + compatible = "renesas,r9a08g046-gbeth", "snps,dwmac-5.30a"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3", "ptp-pps-0", + "ptp-pps-1", "ptp-pps-2", "ptp-pps-3"; + clocks = <&cpg CPG_MOD R9A08G046_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A08G046_ETH0_CLK_CHI>, + <&cpg CPG_MOD R9A08G046_ETH0_CLK_PTP_REF_I>, + <&cpg CPG_MOD R9A08G046_ETH0_CLK_TX_I>, + <&cpg CPG_MOD R9A08G046_ETH0_CLK_RX_I>, + <&cpg CPG_MOD R9A08G046_ETH0_CLK_TX_180_I>, + <&cpg CPG_MOD R9A08G046_ETH0_CLK_RX_180_I>, + <&cpg CPG_MOD R9A08G046_ETH0_CLK_RMII_I>, + <&cpg CPG_MOD R9A08G046_ETH0_CLK_TX_I_RMII>, + <&cpg CPG_MOD R9A08G046_ETH0_CLK_RX_I_RMII>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180", + "rmii", "rmii_tx", "rmii_rx"; + resets = <&cpg R9A08G046_ETH0_ARESET_N>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup0>; + snps,mtl-tx-config = <&mtl_tx_setup0>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup0: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup0: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,weight = <0x12>; + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,weight = <0x14>; + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,weight = <0x18>; + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + + eth1: ethernet@11c40000 { + compatible = "renesas,r9a08g046-gbeth", "snps,dwmac-5.30a"; + reg = <0 0x11c40000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3", "ptp-pps-0", + "ptp-pps-1", "ptp-pps-2", "ptp-pps-3"; + clocks = <&cpg CPG_MOD R9A08G046_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A08G046_ETH1_CLK_CHI>, + <&cpg CPG_MOD R9A08G046_ETH1_CLK_PTP_REF_I>, + <&cpg CPG_MOD R9A08G046_ETH1_CLK_TX_I>, + <&cpg CPG_MOD R9A08G046_ETH1_CLK_RX_I>, + <&cpg CPG_MOD R9A08G046_ETH1_CLK_TX_180_I>, + <&cpg CPG_MOD R9A08G046_ETH1_CLK_RX_180_I>, + <&cpg CPG_MOD R9A08G046_ETH1_CLK_RMII_I>, + <&cpg CPG_MOD R9A08G046_ETH1_CLK_TX_I_RMII>, + <&cpg CPG_MOD R9A08G046_ETH1_CLK_RX_I_RMII>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180", + "rmii", "rmii_tx", "rmii_rx"; + resets = <&cpg R9A08G046_ETH1_ARESET_N>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,weight = <0x12>; + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,weight = <0x14>; + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,weight = <0x18>; + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + pcie: pcie@11e40000 { reg = <0 0x11e40000 0 0x10000>; ranges = <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>; @@ -198,6 +959,27 @@ interrupt-controller; interrupts = ; }; + + wdt0: watchdog@12800800 { + compatible = "renesas,r9a08g046-wdt", "renesas,rzg2l-wdt"; + reg = <0 0x12800800 0 0x400>; + clocks = <&cpg CPG_MOD R9A08G046_WDT0_PCLK>, + <&cpg CPG_MOD R9A08G046_WDT0_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = , + ; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A08G046_WDT0_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <16 8 4 0 0 0 0>; }; timer { diff --git a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts index 86db863..32d3b08 100644 --- a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts @@ -7,13 +7,24 @@ /dts-v1/; -/* Add place holder to avoid compilation error with renesas-smarc2.dtsi */ -#define KEY_1_GPIO 1 -#define KEY_2_GPIO 2 -#define KEY_3_GPIO 3 +/* Switch selection settings */ +#define RZ_BOOT_MODE3 1 +#define SW_SD2_EN 0 +#define SW_DPI_EN 0 +#define SW_GPIO4 1 +#define SW_I3C_EN 0 + +#define PMOD_GPIO4 0 +#define PMOD_GPIO6 0 +#define PMOD_GPIO7 0 + +#define KEY_1_GPIO RZG3L_GPIO(J, 3) +#define KEY_2_GPIO RZG3L_GPIO(6, 4) +#define KEY_3_GPIO RZG3L_GPIO(6, 5) #include #include +#include #include "r9a08g046l48.dtsi" #include "rzg3l-smarc-som.dtsi" #include "renesas-smarc2.dtsi" @@ -24,14 +35,131 @@ "renesas,r9a08g046l48", "renesas,r9a08g046"; aliases { + i2c2 = &i2c2; + i2c3 = &i2c3; serial3 = &scif0; }; + +#if !SW_SD2_EN && !SW_I3C_EN + snd_rzg3l: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "snd_rzg3l"; + #address-cells = <1>; + #size-cells = <0>; + + ssi_link_play: simple-audio-card,dai-link@0 { + reg = <0>; + format = "i2s"; + bitclock-master = <&cpu_dai>; + frame-master = <&cpu_dai>; + mclk-fs = <256>; + + cpu_dai: cpu { + sound-dai = <&ssi0>; + }; + + codec_dai: codec { + sound-dai = <&da7212>; + clocks = <&versa3 1>; + }; + }; + }; +#endif }; -&keys { - status = "disabled"; +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +#if !SW_I3C_EN +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + + da7212: codec@1a { + compatible = "dlg,da7212"; + reg = <0x1a>; + + clocks = <&versa3 1>; + clock-names = "mclk"; + + #sound-dai-cells = <0>; + + dlg,micbias1-lvl = <2500>; + dlg,micbias2-lvl = <2500>; + dlg,dmic-data-sel = "lrise_rfall"; + dlg,dmic-samplephase = "between_clkedge"; + dlg,dmic-clkrate = <3000000>; + + VDDA-supply = <®_1p8v>; + VDDSP-supply = <®_3p3v>; + VDDMIC-supply = <®_3p3v>; + VDDIO-supply = <®_1p8v>; + }; +}; +#endif +&keys { +#if !RZ_BOOT_MODE3 || !SW_GPIO4 || PMOD_GPIO4 /delete-node/ key-1; +#endif + +#if SW_DPI_EN || PMOD_GPIO6 /delete-node/ key-2; +#endif + +#if SW_DPI_EN || PMOD_GPIO7 /delete-node/ key-3; +#endif +}; + +&pinctrl { + audio_clk_pins: audio-clock { + pinmux = , /* AUDIO_CLK_B */ + ; /* AUDIO_CLK_C */ + }; + + i2c2_pins: i2c2 { + pinmux = , /* RIIC2_SCL */ + ; /* RIIC2_SDA */ + }; + + i2c3_pins: i2c3 { + pinmux = , /* RIIC3_SCL */ + ; /* RIIC3_SDA */ + }; + + scif0_pins: scif0 { + pins = "SCIF0_TXD", "SCIF0_RXD"; + power-source = <1800>; + }; + + ssi0_pins: ssi0 { + pinmux = , /* SSIF0_RXD */ + , /* SSIF0_BCK */ + , /* SSIF0_RCK */ + ; /* SSIF0_TXD */ + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; +}; + +#if !SW_SD2_EN +&ssi0 { + clocks = <&cpg CPG_MOD R9A08G046_SSI0_PCLK2>, + <&cpg CPG_MOD R9A08G046_SSI0_PCLK_SFR>, + <&versa3 2>, <&versa3 3>; + pinctrl-0 = <&audio_clk_pins>, <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; }; +#endif diff --git a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi index 95a4e30..b48da85 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi @@ -265,6 +265,7 @@ interrupt-parent = <&icu>; power-domains = <&cpg>; resets = <&cpg 0xa5>, <&cpg 0xa6>; + reset-names = "main", "error"; }; cpg: clock-controller@10420000 { @@ -1584,6 +1585,58 @@ }; }; }; + + fcpvd0: fcp@16470000 { + compatible = "renesas,r9a09g047-fcpvd", + "renesas,fcpv"; + reg = <0 0x16470000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xed>, + <&cpg CPG_MOD 0xee>, + <&cpg CPG_MOD 0xef>; + clock-names = "aclk", "pclk", "vclk"; + resets = <&cpg 0xdc>; + power-domains = <&cpg>; + }; + + fcpvd1: fcp@164a0000 { + compatible = "renesas,r9a09g047-fcpvd", + "renesas,fcpv"; + reg = <0 0x164a0000 0 0x10000>; + clocks = <&cpg CPG_MOD 0x1a8>, + <&cpg CPG_MOD 0x1a9>, + <&cpg CPG_MOD 0x1aa>; + clock-names = "aclk", "pclk", "vclk"; + resets = <&cpg 0x11e>; + power-domains = <&cpg>; + }; + + vspd0: vsp@16480000 { + compatible = "renesas,r9a09g047-vsp2", + "renesas,r9a07g044-vsp2"; + reg = <0 0x16480000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xed>, + <&cpg CPG_MOD 0xee>, + <&cpg CPG_MOD 0xef>; + clock-names = "aclk", "pclk", "vclk"; + resets = <&cpg 0xdc>; + power-domains = <&cpg>; + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@164b0000 { + compatible = "renesas,r9a09g047-vsp2", + "renesas,r9a07g044-vsp2"; + reg = <0 0x164b0000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 0x1a8>, + <&cpg CPG_MOD 0x1a9>, + <&cpg CPG_MOD 0x1aa>; + clock-names = "aclk", "pclk", "vclk"; + resets = <&cpg 0x11e>; + power-domains = <&cpg>; + renesas,fcp = <&fcpvd1>; + }; }; stmmac_axi_setup: stmmac-axi-config { diff --git a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi index 7ccddd6..d6c8c39 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi @@ -288,6 +288,7 @@ gpio-ranges = <&pinctrl 0 0 96>; power-domains = <&cpg>; resets = <&cpg 0xa5>, <&cpg 0xa6>; + reset-names = "main", "error"; }; cpg: clock-controller@10420000 { @@ -1043,6 +1044,75 @@ status = "disabled"; }; + pcie: pcie@13400000 { + compatible = "renesas,r9a09g056-pcie", "renesas,r9a09g047-pcie"; + reg = <0 0x13400000 0 0x10000>; + ranges = <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>, + <0x43000000 4 0x40000000 4 0x40000000 6 0x00000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 2 0x00000000>; + bus-range = <0x0 0xff>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "serr", "serr_cor", "serr_nonfatal", + "serr_fatal", "axi_err", "inta", + "intb", "intc", "intd", "msi", + "link_bandwidth", "pm_pme", "dma", + "pcie_evt", "msg", "all", + "link_equalization_request", + "turn_off_event", "pmu_poweroff", + "d3_event_f0", "d3_event_f1", + "cfg_pmcsr_writeclear_f0", + "cfg_pmcsr_writeclear_f1"; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie 0 0 0 0>, /* INTA */ + <0 0 0 2 &pcie 0 0 0 1>, /* INTB */ + <0 0 0 3 &pcie 0 0 0 2>, /* INTC */ + <0 0 0 4 &pcie 0 0 0 3>; /* INTD */ + clocks = <&cpg CPG_MOD 0xc4>, <&cpg CPG_MOD 0xc5>; + clock-names = "aclk", "pmu"; + resets = <&cpg 0xb2>; + reset-names = "aresetn"; + power-domains = <&cpg>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + renesas,sysc = <&sys>; + status = "disabled"; + + pcie_port0: pcie@0,0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges; + device_type = "pci"; + vendor-id = <0x1912>; + device-id = <0x003b>; + #address-cells = <3>; + #size-cells = <2>; + }; + }; + i2c0: i2c@14400400 { compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; reg = <0 0x14400400 0 0x400>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts index 00e5455..c43325d 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts @@ -26,6 +26,7 @@ i2c7 = &i2c7; i2c8 = &i2c8; mmc1 = &sdhi1; + rtc0 = &rtc; serial0 = &scif; }; @@ -63,6 +64,12 @@ reg = <0x0 0x48000000 0x1 0xf8000000>; }; + pcie_refclk: clock-pcie-ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + reg_0p8v: regulator-0p8v { compatible = "regulator-fixed"; regulator-name = "fixed-0.8V"; @@ -333,6 +340,17 @@ status = "okay"; }; +&pcie { + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pcie_port0 { + clocks = <&pcie_refclk>; + clock-names = "ref"; +}; + &pinctrl { eth0_pins: eth0 { pins = "ET0_TXC_TXCLK"; @@ -383,6 +401,12 @@ ; /* I2C8_SCL */ }; + pcie_pins: pcie { + pins = "PCIE0_RSTOUTB"; + slew-rate = <0>; + renesas,output-impedance = <2>; + }; + scif_pins: scif { pins = "SCIF_TXD", "SCIF_RXD"; renesas,output-impedance = <1>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi index 6f6fe5f..1e94366 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi @@ -270,6 +270,7 @@ interrupt-parent = <&icu>; power-domains = <&cpg>; resets = <&cpg 0xa5>, <&cpg 0xa6>; + reset-names = "main", "error"; }; cpg: clock-controller@10420000 { diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts index bd69109..3c1ddac 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts @@ -27,6 +27,7 @@ i2c7 = &i2c7; i2c8 = &i2c8; mmc1 = &sdhi1; + rtc0 = &rtc; serial0 = &scif; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g077.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi index 3761551..4049415 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g077.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi @@ -1006,6 +1006,46 @@ }; }; + xspi0: spi@801c0000 { + compatible = "renesas,r9a09g077-xspi", + "renesas,r9a09g047-xspi"; + reg = <0 0x801c0000 0 0x1000>, + <0 0x40000000 0 0x10000000>; + reg-names = "regs", "dirmap"; + interrupts = , + ; + interrupt-names = "pulse", "err_pulse"; + clocks = <&cpg CPG_MOD 4>, + <&cpg CPG_CORE R9A09G077_XSPI_CLK0>; + clock-names = "ahb", "spi"; + resets = <&cpg 4>; + reset-names = "hresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + xspi1: spi@801c1000 { + compatible = "renesas,r9a09g077-xspi", + "renesas,r9a09g047-xspi"; + reg = <0 0x801c1000 0 0x1000>, + <0 0x50000000 0 0x10000000>; + reg-names = "regs", "dirmap"; + interrupts = , + ; + interrupt-names = "pulse", "err_pulse"; + clocks = <&cpg CPG_MOD 5>, + <&cpg CPG_CORE R9A09G077_XSPI_CLK1>; + clock-names = "ahb", "spi"; + resets = <&cpg 5>; + reset-names = "hresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + cpg: clock-controller@80280000 { compatible = "renesas,r9a09g077-cpg-mssr"; reg = <0 0x80280000 0 0x10000>, @@ -1116,6 +1156,74 @@ interrupts = ; }; + mtu3: timer@90001200 { + compatible = "renesas,r9a09g077-mtu3", + "renesas,rz-mtu3"; + reg = <0 0x90001200 0 0xb00>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", + "tciv0", "tgie0", "tgif0", + "tgia1", "tgib1", "tciv1", "tciu1", + "tgia2", "tgib2", "tciv2", "tciu2", + "tgia3", "tgib3", "tgic3", "tgid3", + "tciv3", + "tgia4", "tgib4", "tgic4", "tgid4", + "tciv4", + "tgiu5", "tgiv5", "tgiw5", + "tgia6", "tgib6", "tgic6", "tgid6", + "tciv6", + "tgia7", "tgib7", "tgic7", "tgid7", + "tciv7", + "tgia8", "tgib8", "tgic8", "tgid8", + "tciv8"; + clocks = <&cpg CPG_MOD 200>; + power-domains = <&cpg>; + #pwm-cells = <3>; + status = "disabled"; + }; + adc0: adc@90014000 { compatible = "renesas,r9a09g077-adc"; reg = <0 0x90014000 0 0x400>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts index 4c0e528..e9ed2de 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts @@ -345,3 +345,18 @@ }; }; +/* + * XSPI0 Pin Configuration: + * ------------------------ + * Signal | Pin | SW5 + * -----------|---------|--------------- + * XSPI0_ECS | P07_5 | 5: OFF, 6: ON + */ +&xspi0_pins { + ecs-pins { + pinmux = ; /* XSPI0_ECS0 */ + drive-strength-microamp = <2500>; + input-schmitt-disable; + slew-rate = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g087.dtsi b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi index f697e96..e8d4f76 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g087.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi @@ -1009,6 +1009,46 @@ }; }; + xspi0: spi@801c0000 { + compatible = "renesas,r9a09g087-xspi", + "renesas,r9a09g047-xspi"; + reg = <0 0x801c0000 0 0x1000>, + <0 0x40000000 0 0x10000000>; + reg-names = "regs", "dirmap"; + interrupts = , + ; + interrupt-names = "pulse", "err_pulse"; + clocks = <&cpg CPG_MOD 4>, + <&cpg CPG_CORE R9A09G087_XSPI_CLK0>; + clock-names = "ahb", "spi"; + resets = <&cpg 4>; + reset-names = "hresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + xspi1: spi@801c1000 { + compatible = "renesas,r9a09g087-xspi", + "renesas,r9a09g047-xspi"; + reg = <0 0x801c1000 0 0x1000>, + <0 0x50000000 0 0x10000000>; + reg-names = "regs", "dirmap"; + interrupts = , + ; + interrupt-names = "pulse", "err_pulse"; + clocks = <&cpg CPG_MOD 5>, + <&cpg CPG_CORE R9A09G087_XSPI_CLK1>; + clock-names = "ahb", "spi"; + resets = <&cpg 5>; + reset-names = "hresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + cpg: clock-controller@80280000 { compatible = "renesas,r9a09g087-cpg-mssr"; reg = <0 0x80280000 0 0x10000>, @@ -1119,6 +1159,74 @@ interrupts = ; }; + mtu3: timer@90001200 { + compatible = "renesas,r9a09g087-mtu3", + "renesas,rz-mtu3"; + reg = <0 0x90001200 0 0xb00>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", + "tciv0", "tgie0", "tgif0", + "tgia1", "tgib1", "tciv1", "tciu1", + "tgia2", "tgib2", "tciv2", "tciu2", + "tgia3", "tgib3", "tgic3", "tgid3", + "tciv3", + "tgia4", "tgib4", "tgic4", "tgid4", + "tciv4", + "tgiu5", "tgiv5", "tgiw5", + "tgia6", "tgib6", "tgic6", "tgid6", + "tciv6", + "tgia7", "tgib7", "tgic7", "tgid7", + "tciv7", + "tgia8", "tgib8", "tgic8", "tgid8", + "tciv8"; + clocks = <&cpg CPG_MOD 200>; + power-domains = <&cpg>; + #pwm-cells = <3>; + status = "disabled"; + }; + adc0: adc@90014000 { compatible = "renesas,r9a09g087-adc", "renesas,r9a09g077-adc"; reg = <0 0x90014000 0 0x400>; diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi index f541257..dbe1690 100644 --- a/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi +++ b/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi @@ -24,19 +24,10 @@ pinctrl-names = "default"; status = "okay"; +}; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - du_out_rgb: endpoint { - remote-endpoint = <&adv7513_in>; - }; - }; - }; +&du_out_rgb { + remote-endpoint = <&adv7513_in>; }; &ADV7513_PARENT_I2C { diff --git a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi index d978619..2e1d968 100644 --- a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi @@ -193,20 +193,20 @@ }; ctrl { - pinmux = , /* MDC */ - , /* MDIO */ - , /* PHY_INTR (IRQ2) */ - , /* RXD3 */ - , /* RXD2 */ - , /* RXD1 */ - , /* RXD0 */ - , /* RXC */ + pinmux = , /* MDIO */ + , /* MDC */ , /* RX_CTL */ - , /* TXD3 */ - , /* TXD2 */ - , /* TXD1 */ + , /* TX_CTL */ + , /* RXC */ , /* TXD0 */ - ; /* TX_CTL */ + , /* TXD1 */ + , /* TXD2 */ + , /* TXD3 */ + , /* RXD0 */ + , /* RXD1 */ + , /* RXD2 */ + , /* RXD3 */ + ; /* PHY_INTR (IRQ2) */ }; }; @@ -217,21 +217,20 @@ }; ctrl { - - pinmux = , /* MDC */ - , /* MDIO */ - , /* PHY_INTR (IRQ15) */ - , /* RXD3 */ - , /* RXD2 */ - , /* RXD1 */ - , /* RXD0 */ - , /* RXC */ + pinmux = , /* MDIO */ + , /* MDC */ , /* RX_CTL */ - , /* TXD3 */ - , /* TXD2 */ - , /* TXD1 */ + , /* TX_CTL */ + , /* RXC */ , /* TXD0 */ - ; /* TX_CTL */ + , /* TXD1 */ + , /* TXD2 */ + , /* TXD3 */ + , /* RXD0 */ + , /* RXD1 */ + , /* RXD2 */ + , /* RXD3 */ + ; /* PHY_INTR (IRQ15) */ }; }; diff --git a/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi index ab49506..091a227 100644 --- a/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi @@ -5,16 +5,220 @@ * Copyright (C) 2026 Renesas Electronics Corp. */ +/* + * Please set the below switch position on the SoM and the corresponding macro + * on the board DTS: + * + * Switch position SYS.2, Macro SW_I3C_EN: + * 0 - SMARC_I2C_GP is enabled + * 1 - I3C is enabled + * + * Switch position SYS.4, Macro SW_SD2_EN: + * 0 - Select I2S0 + * 1 - Select SD2 + * + * Switch position SYS.5, Macro SW_DPI_EN: + * 0 - Select multiple SMARC signals active + * 1 - Select LCD + * + * Switch position BOOT.1, Macro RZ_BOOT_MODE3: + * 0 - Select JTAG enabled + * 1 - Select SDIO {CD,IOVS,PWEN} and GPIO4 Active + * + * Switch position SW_GPIO4, Macro SW_GPIO4: + * 0 - Select RZ_VBAT_TAMPER (position 2-1) + * 1 - Select GPIO4 (position 2-3) + */ + / { compatible = "renesas,rzg3l-smarcm", "renesas,r9a08g046l48", "renesas,r9a08g046"; + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + i2c0 = &i2c0; + }; + memory@48000000 { device_type = "memory"; /* First 128MiB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x78000000>; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +ð0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +ð0_rxc_rx_clk { + clock-frequency = <125000000>; +}; + +ð1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +ð1_rxc_rx_clk { + clock-frequency = <125000000>; }; &extal_clk { clock-frequency = <24000000>; }; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + versa3: clock-generator@68 { + compatible = "renesas,5p35023"; + reg = <0x68>; + #clock-cells = <1>; + clocks = <&x2_clk>; + + assigned-clocks = <&versa3 1>, <&versa3 2>, + <&versa3 3>, <&versa3 4>; + assigned-clock-rates = <12288000>, <11289600>, + <12288000>, <25000000>; + }; +}; + +&mdio0 { + phy0: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640"; + reg = <7>; + interrupts-extended = <&icu 3 IRQ_TYPE_LEVEL_LOW>; + rxc-skew-psec = <1400>; + txc-skew-psec = <1400>; + rxdv-skew-psec = <0>; + txen-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&mdio1 { + phy1: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640"; + reg = <7>; + interrupts-extended = <&icu 16 IRQ_TYPE_LEVEL_LOW>; + rxc-skew-psec = <1400>; + txc-skew-psec = <1400>; + rxdv-skew-psec = <0>; + txen-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&pinctrl { + eth0_pins: eth0 { + txc { + pinmux = ; /* ETH0_TXC_REF_CLK */ + power-source = <1800>; + output-enable; + drive-strength-microamp = <5200>; + }; + + ctrl { + pinmux = , /* MDIO */ + , /* MDC */ + , /* RX_CTL */ + , /* TX_CTL */ + , /* RXC */ + , /* TXD0 */ + , /* TXD1 */ + , /* TXD2 */ + , /* TXD3 */ + , /* RXD0 */ + , /* RXD1 */ + , /* RXD2 */ + , /* RXD3 */ + ; /* PHY_INTR */ + power-source = <1800>; + }; + }; + + eth1_pins: eth1 { + txc { + pinmux = ; /* ETH1_TXC_REF_CLK */ + power-source = <1800>; + output-enable; + drive-strength-microamp = <5200>; + }; + + ctrl { + pinmux = , /* MDIO */ + , /* MDC */ + , /* RX_CTL */ + , /* TX_CTL */ + , /* RXC */ + , /* TXD0 */ + , /* TXD1 */ + , /* TXD2 */ + , /* TXD3 */ + , /* RXD0 */ + , /* RXD1 */ + , /* RXD2 */ + , /* RXD3 */ + ; /* PHY_INTR */ + power-source = <1800>; + }; + }; + + i2c0_pins: i2c0 { + pinmux = , /* RIIC0_SCL */ + ; /* RIIC0_SDA */ + }; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi index f87c249..e86e6d3 100644 --- a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi +++ b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi @@ -5,6 +5,7 @@ * Copyright (C) 2025 Renesas Electronics Corp. */ +#include #include #include #include @@ -20,6 +21,8 @@ mmc0 = &sdhi0; mmc1 = &sdhi1; serial0 = &sci0; + spi0 = &xspi0; + spi1 = &xspi1; }; chosen { @@ -275,12 +278,63 @@ , /* SD0_DATA5 */ , /* SD0_DATA6 */ ; /* SD0_DATA7 */ + drive-strength-microamp = <5000>; + slew-rate = <1>; + input-schmitt-disable; }; - ctrl-pins { - pinmux = , /* SD0_CLK */ - , /* SD0_CMD */ - ; /* SD0_RST# */ + clk-pins { + pinmux = ; /* SD0_CLK */ + drive-strength-microamp = <9000>; + slew-rate = <1>; + }; + + cmd-pins { + pinmux = ; /* SD0_CMD */ + drive-strength-microamp = <5000>; + slew-rate = <1>; + input-schmitt-disable; + }; + + rst-pins { + pinmux = ; /* SD0_RST# */ + drive-strength-microamp = <5000>; + slew-rate = <1>; + }; + }; + + sdhi0_emmc_uhs_pins: sd0-emmc-uhs-group { + data-pins { + pinmux = , /* SD0_DATA0 */ + , /* SD0_DATA1 */ + , /* SD0_DATA2 */ + , /* SD0_DATA3 */ + , /* SD0_DATA4 */ + , /* SD0_DATA5 */ + , /* SD0_DATA6 */ + ; /* SD0_DATA7 */ + drive-strength-microamp = <9000>; + slew-rate = <1>; + input-schmitt-disable; + }; + + clk-pins { + pinmux = ; /* SD0_CLK */ + drive-strength-microamp = <11800>; + slew-rate = <1>; + }; + + cmd-pins { + pinmux = ; /* SD0_CMD */ + drive-strength-microamp = <9000>; + slew-rate = <1>; + input-schmitt-disable; + }; + + rst-pins { + pinmux = ; /* SD0_RST# */ + drive-strength-microamp = <9000>; + slew-rate = <1>; }; }; @@ -299,12 +353,49 @@ , /* SD0_DATA1 */ , /* SD0_DATA2 */ ; /* SD0_DATA3 */ + drive-strength-microamp = <5000>; + slew-rate = <1>; + input-schmitt-disable; + }; + + clk-pins { + pinmux = ; /* SD0_CLK */ + drive-strength-microamp = <9000>; + slew-rate = <1>; + }; + + ctrl-pins { + pinmux = , /* SD0_CMD */ + ; /* SD0_CD */ + drive-strength-microamp = <5000>; + slew-rate = <1>; + input-schmitt-disable; + }; + }; + + sdhi0_sd_uhs_pins: sd0-sd-uhs-group { + data-pins { + pinmux = , /* SD0_DATA0 */ + , /* SD0_DATA1 */ + , /* SD0_DATA2 */ + ; /* SD0_DATA3 */ + drive-strength-microamp = <9000>; + slew-rate = <1>; + input-schmitt-disable; + }; + + clk-pins { + pinmux = ; /* SD0_CLK */ + drive-strength-microamp = <11800>; + slew-rate = <1>; }; ctrl-pins { - pinmux = , /* SD0_CLK */ - , /* SD0_CMD */ + pinmux = , /* SD0_CMD */ ; /* SD0_CD */ + drive-strength-microamp = <9000>; + slew-rate = <1>; + input-schmitt-disable; }; }; @@ -323,14 +414,90 @@ , /* SD1_DATA1 */ , /* SD1_DATA2 */ ; /* SD1_DATA3 */ + drive-strength-microamp = <5000>; + slew-rate = <1>; + input-schmitt-disable; + }; + + clk-pins { + pinmux = ; /* SD1_CLK */ + drive-strength-microamp = <9000>; + slew-rate = <1>; }; ctrl-pins { - pinmux = , /* SD1_CLK */ - , /* SD1_CMD */ + pinmux = , /* SD1_CMD */ ; /* SD1_CD */ + drive-strength-microamp = <5000>; + slew-rate = <1>; + input-schmitt-disable; + }; + }; + + sdhi1_uhs_pins: sd1-uhs-group { + data-pins { + pinmux = , /* SD1_DATA0 */ + , /* SD1_DATA1 */ + , /* SD1_DATA2 */ + ; /* SD1_DATA3 */ + drive-strength-microamp = <9000>; + slew-rate = <1>; + input-schmitt-disable; + }; + + clk-pins { + pinmux = ; /* SD1_CLK */ + drive-strength-microamp = <11800>; + slew-rate = <1>; + }; + + ctrl-pins { + pinmux = , /* SD1_CMD */ + ; /* SD1_CD */ + drive-strength-microamp = <9000>; + slew-rate = <1>; + input-schmitt-disable; + }; + }; + + xspi0_pins: xspi0-group { + ctrl-data-pins { + pinmux = , /* XSPI0_CKP */ + , /* XSPI0_CS0 */ + , /* XSPI0_DS */ + , /* XSPI0_IO0 */ + , /* XSPI0_IO1 */ + , /* XSPI0_IO2 */ + , /* XSPI0_IO3 */ + , /* XSPI0_IO4 */ + , /* XSPI0_IO5 */ + , /* XSPI0_IO6 */ + , /* XSPI0_IO7 */ + ; /* XSPI0_RESET0 */ + drive-strength-microamp = <9000>; + input-schmitt-disable; + slew-rate = <1>; }; }; + + /* + * XSPI1 Pin Configuration: + * ------------------------ + * Signal | Pin | RZ/T2H (SW1) | RZ/N2H (DSW2) + * -----------|----------|---------------|--------------- + * ALL | Multiple | 6: ON | 6: ON + */ + xspi1_pins: xspi1-pins { + pinmux = , /* XSPI1_CKP */ + , /* XSPI1_CS0 */ + , /* XSPI1_IO0 */ + , /* XSPI1_IO1 */ + , /* XSPI1_IO2 */ + ; /* XSPI1_IO3 */ + drive-strength-microamp = <9000>; + input-schmitt-enable; + slew-rate = <1>; + }; }; &sci0 { @@ -342,7 +509,7 @@ #if SD0_EMMC &sdhi0 { pinctrl-0 = <&sdhi0_emmc_pins>; - pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_uhs_pins>; pinctrl-names = "default", "state_uhs"; vmmc-supply = <®_3p3v>; vqmmc-supply = <®_1p8v>; @@ -357,7 +524,7 @@ #if SD0_SD &sdhi0 { pinctrl-0 = <&sdhi0_sd_pins>; - pinctrl-1 = <&sdhi0_sd_pins>; + pinctrl-1 = <&sdhi0_sd_uhs_pins>; pinctrl-names = "default", "state_uhs"; vmmc-supply = <®_3p3v>; vqmmc-supply = <&vqmmc_sdhi0>; @@ -372,7 +539,7 @@ #if SD1_MICRO_SD &sdhi1 { pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_uhs_pins>; pinctrl-names = "default", "state_uhs"; vmmc-supply = <®_3p3v>; vqmmc-supply = <&vccq_sdhi1>; @@ -395,3 +562,88 @@ timeout-sec = <60>; }; +&xspi0 { + pinctrl-0 = <&xspi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&cpg CPG_CORE R9A09G077_XSPI_CLK0>; + assigned-clock-rates = <50000000>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + vcc-supply = <®_3p3v>; + m25p,fast-read; + /* + * Configure for 1-bit mode to prevent the BootROM from failing + * to load the first-stage bootloader following a watchdog reset. + */ + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2-0"; + reg = <0x00000000 0x00060000>; + read-only; + }; + + partition@60000 { + label = "fip-0"; + reg = <0x00060000 0x007a0000>; + read-only; + }; + + partition@800000 { + label = "user-0"; + reg = <0x800000 0x003800000>; + }; + }; + }; +}; + +&xspi1 { + pinctrl-0 = <&xspi1_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&cpg CPG_CORE R9A09G077_XSPI_CLK1>; + assigned-clock-rates = <50000000>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + vcc-supply = <®_3p3v>; + m25p,fast-read; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2-1"; + reg = <0x00000000 0x00060000>; + }; + + partition@60000 { + label = "fip-1"; + reg = <0x00060000 0x007a0000>; + }; + + partition@800000 { + label = "user-1"; + reg = <0x800000 0x800000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index e505161..1317ede 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -211,19 +211,6 @@ regulator-always-on; }; - sound_card: sound { - compatible = "audio-graph-card"; - - label = "rcar-sound"; - - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ -#ifdef SOC_HAS_HDMI1 - &rsnd_port2 /* HDMI1 */ -#endif - >; - }; - vbus0_usb2: regulator-vbus0-usb2 { compatible = "regulator-fixed"; @@ -281,6 +268,19 @@ states = <3300000 1>, <1800000 0>; }; + sound_card: sound { + compatible = "audio-graph-card"; + + label = "rcar-sound"; + + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ +#ifdef SOC_HAS_HDMI1 + &rsnd_port2 /* HDMI1 */ +#endif + >; + }; + vga { compatible = "vga-connector"; @@ -361,6 +361,8 @@ reg = <0>; interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; }; }; @@ -507,7 +509,7 @@ }; }; - cs2000: clk-multiplier@4f { + cs2000: clock-controller@4f { #clock-cells = <0>; compatible = "cirrus,cs2000-cp"; reg = <0x4f>; diff --git a/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso index 7807c3f..4eb3e06 100644 --- a/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso +++ b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso @@ -6,36 +6,5 @@ * Copyright 2021 Ideas on Board Oy */ -/dts-v1/; -/plugin/; - -&{/} { +#define RENESAS_LVDS_OUTPUT lvds0 #include "panel-aa104xd12.dtsi" -}; - -&{/panel} { - backlight = <&backlight>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; -}; - -&lvds0 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 67fd6a6..119f2b5 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -163,6 +163,8 @@ reg = <0>; interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; }; }; @@ -221,7 +223,7 @@ asahi-kasei,out6-single-end; }; - cs2000: clk-multiplier@4f { + cs2000: clock-controller@4f { #clock-cells = <0>; compatible = "cirrus,cs2000-cp"; reg = <0x4f>; diff --git a/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi index b4024e8..c5045bd 100644 --- a/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi +++ b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi @@ -169,6 +169,8 @@ reg = <0>; interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index cb55c6b..761d82b 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -206,6 +206,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus-radxa-cam4k-cam0.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus-radxa-cam4k-cam1.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5t.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo @@ -321,6 +323,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtb rk3588-rock-5b-pcie-srns-dtbs := rk3588-rock-5b.dtb \ rk3588-rock-5b-pcie-srns.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus-radxa-4k-cam.dtb +rk3588-rock-5b-plus-radxa-4k-cam-dtbs := rk3588-rock-5b-plus.dtb \ + rk3588-rock-5b-plus-radxa-cam4k-cam0.dtbo \ + rk3588-rock-5b-plus-radxa-cam4k-cam1.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-haikou-video-demo.dtb rk3588-tiger-haikou-haikou-video-demo-dtbs := rk3588-tiger-haikou.dtb \ rk3588-tiger-haikou-video-demo.dtbo diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi b/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi index b7e669d..add917a 100644 --- a/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi @@ -397,7 +397,7 @@ &mdio { dp83825: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id2000.a140"; reg = <0x0>; pinctrl-names = "default"; pinctrl-0 = <&phy_rst>; diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi index 4203b33..973b4c5 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi @@ -344,7 +344,7 @@ &mdio { dp83825: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id2000.a140"; reg = <0x0>; pinctrl-names = "default"; pinctrl-0 = <&phy_rst>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 7eca1da..2f9e396 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -18,6 +18,11 @@ stdout-path = "serial2:115200n8"; }; + firmware { + #address-cells = <2>; + #size-cells = <2>; + }; + /* * Power Tree * diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts index b76f989..e366f1a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts @@ -16,7 +16,7 @@ &i2c2 { eeprom@51 { - compatible = "microchip,24c02", "atmel,24c02"; + compatible = "microchip,24aa025e48"; reg = <0x51>; pagesize = <16>; size = <256>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi index 3a9a10f..4274d1b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi @@ -66,16 +66,41 @@ status = "disabled"; }; +/* No USB type-C PD power manager */ +/delete-node/ &fusb0; + +&i2c1 { + status = "disabled"; +}; + &i2c4 { status = "disabled"; }; +&i2c7 { + status = "disabled"; +}; + +&i2s2 { + status = "disabled"; +}; + +&hdmi { + status = "disabled"; +}; + +&hdmi_sound { + status = "disabled"; +}; + &pcie0 { num-lanes = <1>; vpcie3v3-supply = <&vcc3v3_sys>; }; &pinctrl { + /delete-node/ fusb30x; + gpio-leds { /delete-node/ status-led-pin; @@ -101,14 +126,21 @@ }; }; +&pwm0 { + status = "disabled"; +}; + &sdhci { status = "disabled"; }; &sdio0 { + /delete-property/ mmc-pwrseq; status = "disabled"; }; +/delete-node/ &sdio_pwrseq; + &u2phy0_host { phy-supply = <&vdd_5v>; }; @@ -119,12 +151,48 @@ &uart0 { status = "disabled"; + + /delete-node/ bluetooth; }; +&u2phy1_host { + status = "disabled"; +}; + +&usb_host1_ehci { + status = "disabled"; +}; + +&usb_host1_ohci { + status = "disabled"; +}; &usbdrd_dwc3_0 { dr_mode = "host"; }; +/delete-node/ &vbus_typec; + &vcc3v3_sys { vin-supply = <&vcc5v0_sys>; }; + +&vopb { + status = "disabled"; +}; + +&vopb_mmu { + status = "disabled"; +}; + +&vopl { + status = "disabled"; +}; + +&vopl_mmu { + status = "disabled"; +}; + +/delete-node/ &bt_host_wake_l; +/delete-node/ &bt_reg_on_h; +/delete-node/ &bt_wake_l; +/delete-node/ &wifi_reg_on_h; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index b5c0592..f21fcdc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -526,7 +526,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; regulator-state-mem { regulator-on-in-suspend; diff --git a/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts b/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts index c41af8f..ee4183f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts @@ -480,3 +480,28 @@ vddio-supply = <&vcc_1v8>; }; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy>; + maximum-speed = "high-speed"; + phys = <&usb2phy_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; + +&usb2phy_host { + status = "okay"; +}; + +&usb2phy_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts index 9f68303..97d8512 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts @@ -338,3 +338,32 @@ pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy>; + maximum-speed = "high-speed"; + phys = <&usb2phy_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; + +&usb2phy_host { + phy-supply = <&usb2_host_5v>; + status = "okay"; +}; + +&usb2phy_otg { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts index b324527..f872b8d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts @@ -134,6 +134,18 @@ regulator-max-microvolt = <5000000>; }; + vcc5v0_usb20: regulator-5v0-vcc-usb20 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_en>; + regulator-name = "vcc5v0_usb20"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + vccio_sd: regulator-vccio-sd { compatible = "regulator-gpio"; gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; @@ -273,6 +285,12 @@ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb { + usb_host_en: usb-host-en { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm1 { @@ -320,3 +338,45 @@ pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +/* + * The usb controller can only work in peripheral mode, as it is + * connected to one of the ports of an outward-facing usb hub. + * + * type_c-port (hub-input) + * | + * usb-hub + * | | + * uart-usb usb-host0 + * | + * uart0 + */ +&usb_host0_xhci { + dr_mode = "peripheral"; + extcon = <&usb2phy>; + maximum-speed = "high-speed"; + phys = <&usb2phy_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; + +&usb2phy_host { + phy-supply = <&vcc5v0_usb20>; + status = "okay"; +}; + +&usb2phy_otg { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi b/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi index aedc7ee..501a91f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi @@ -166,6 +166,10 @@ }; }; +&combphy { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_arm>; }; @@ -291,3 +295,16 @@ pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; + +&usb2phy_host { + phy-supply = <&vcc5v0_usb20>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts b/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts index 0b696d4..5e17ec2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts @@ -79,3 +79,14 @@ }; }; }; + +&usb_host0_xhci { + dr_mode = "host"; + extcon = <&usb2phy>; + status = "okay"; +}; + +&usb2phy_otg { + phy-supply = <&vcc5v0_usb30_otg>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts b/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts index 3e2b9b6..f2b021f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts @@ -8,3 +8,15 @@ model = "Radxa ROCK 2F"; compatible = "radxa,rock-2f", "rockchip,rk3528"; }; + +&usb_host0_xhci { + extcon = <&usb2phy>; + maximum-speed = "high-speed"; + phys = <&usb2phy_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb2phy_otg { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi index 806b810..03cd00f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi @@ -336,6 +336,33 @@ }; }; + usb_host0_xhci: usb@fe500000 { + compatible = "rockchip,rk3528-dwc3", "snps,dwc3"; + reg = <0x0 0xfe500000 0x0 0x400000>; + clocks = <&cru CLK_REF_USB3OTG>, + <&cru CLK_SUSPEND_USB3OTG>, + <&cru ACLK_USB3OTG>; + clock-names = "ref_clk", "suspend_clk", "bus_clk"; + interrupts = ; + power-domains = <&power RK3528_PD_VPU>; + resets = <&cru SRST_A_USB3OTG>; + dr_mode = "otg"; + phys = <&usb2phy_otg>, <&combphy PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis_rxdet_inp3_quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis_u2_susphy_quirk; + snps,parkmode-disable-hs-quirk; + snps,parkmode-disable-ss-quirk; + status = "disabled"; + }; + gic: interrupt-controller@fed01000 { compatible = "arm,gic-400"; reg = <0x0 0xfed01000 0 0x1000>, @@ -349,6 +376,30 @@ #interrupt-cells = <3>; }; + usb_host0_ehci: usb@ff100000 { + compatible = "generic-ehci"; + reg = <0x0 0xff100000 0x0 0x40000>; + clocks = <&cru HCLK_USBHOST>, <&cru HCLK_USBHOST_ARB>, + <&usb2phy>; + interrupts = ; + phys = <&usb2phy_host>; + phy-names = "usb"; + power-domains = <&power RK3528_PD_VO>; + status = "disabled"; + }; + + usb_host0_ohci: usb@ff140000 { + compatible = "generic-ohci"; + reg = <0x0 0xff140000 0x0 0x40000>; + clocks = <&cru HCLK_USBHOST>, <&cru HCLK_USBHOST_ARB>, + <&usb2phy>; + interrupts = ; + phys = <&usb2phy_host>; + phy-names = "usb"; + power-domains = <&power RK3528_PD_VO>; + status = "disabled"; + }; + qos_crypto_a: qos@ff200000 { compatible = "rockchip,rk3528-qos", "syscon"; reg = <0x0 0xff200000 0x0 0x20>; @@ -983,6 +1034,14 @@ status = "disabled"; }; + wdt: watchdog@ffac0000 { + compatible = "rockchip,rk3528-wdt", "snps,dw-wdt"; + reg = <0x0 0xffac0000 0x0 0x100>; + clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>; + clock-names = "tclk", "pclk"; + interrupts = ; + }; + saradc: adc@ffae0000 { compatible = "rockchip,rk3528-saradc"; reg = <0x0 0xffae0000 0x0 0x10000>; @@ -1273,6 +1332,35 @@ rockchip,pipe-phy-grf = <&pipe_phy_grf>; status = "disabled"; }; + + usb2phy: usb2phy@ffdf0000 { + compatible = "rockchip,rk3528-usb2phy"; + reg = <0x0 0xffdf0000 0x0 0x10000>; + clocks = <&cru CLK_REF_USBPHY>, <&cru PCLK_USBPHY>; + clock-names = "phyclk", "pclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy_480m"; + power-domains = <&power RK3528_PD_VO>; + rockchip,usbgrf = <&vo_grf>; + status = "disabled"; + + usb2phy_otg: otg-port { + interrupts = , + , + ; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + + usb2phy_host: host-port { + interrupts = ; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts index 7e49906..985770e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts @@ -245,7 +245,7 @@ compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; - interrupts = ; + interrupts = ; clock-output-names = "rk808-clkout1", "rk808-clkout2"; assigned-clocks = <&cru I2S1_MCLKOUT_TX>; assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts index 718d1a2..90ce6f0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts @@ -98,7 +98,7 @@ rgmii_phy0: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - pinctrl-0 = <ð_phy0_reset_pin>; + pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>; pinctrl-names = "default"; }; }; @@ -132,8 +132,8 @@ &pinctrl { gmac0 { - eth_phy0_reset_pin: eth-phy0-reset-pin { - rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; + gmac0_rstn_gpio0_c5_pin: gmac0-rstn-gpio0-c5-pin { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts index 98cfa3a..a091c3a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; +#include #include "rk3568-radxa-cm3i.dtsi" / { @@ -11,6 +12,19 @@ mmc1 = &sdmmc0; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-recovery { + label = "Recovery"; + linux,code = ; + press-threshold-microvolt = <0>; + }; + }; + pwm-leds { compatible = "pwm-leds-multicolor"; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts index 69001e4..149a530 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts @@ -56,7 +56,15 @@ }; }; - /* pi6c pcie clock generator */ + /* PI6C20100 PCIe reference clock buffer */ + pcie30_refclk: pcie-clock-generator { + compatible = "gated-fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "pcie30_refclk"; + vdd-supply = <&vcc3v3_pi6c_03>; + }; + vcc3v3_pi6c_03: regulator-3v3-vcc-pi6c-03 { compatible = "regulator-fixed"; enable-active-high; @@ -64,8 +72,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie_pwren_h>; regulator-name = "vcc3v3_pi6c_03"; - regulator-always-on; - regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <10000>; @@ -553,6 +559,14 @@ }; &pcie3x2 { + clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>, + <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>, + <&cru CLK_PCIE30X2_AUX_NDFT>, + <&cru CLK_PCIE30X2_PIPE_DFT>, + <&pcie30_refclk>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", "aux", + "pipe", "ref"; pinctrl-names = "default"; pinctrl-0 = <&pcie30x2m1_pins>; reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi index 64bdd8b..a583289 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi @@ -195,7 +195,8 @@ interrupts = , , , - ; + , + ; arm,no-tick-in-suspend; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts b/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts index b19f9b6..05fb4a7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts @@ -278,6 +278,9 @@ }; &hdmi { + frl-enable-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -738,6 +741,12 @@ }; }; + hdmi { + hdmi_tx_on_h: hdmi-tx-on-h { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_reset: pcie-reset { rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; @@ -806,6 +815,7 @@ &uart0 { pinctrl-0 = <&uart0m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts index 1c100ff..4ac4465 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts @@ -304,6 +304,9 @@ }; &hdmi { + frl-enable-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -819,6 +822,12 @@ }; }; + hdmi { + hdmi_tx_on_h: hdmi-tx-on-h { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; @@ -966,6 +975,7 @@ &uart0 { pinctrl-0 = <&uart0m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts index fb0dd1b..4c82980 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts @@ -370,6 +370,9 @@ }; &hdmi { + frl-enable-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -895,6 +898,12 @@ }; }; + hdmi { + hdmi_tx_on_h: hdmi-tx-on-h { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { rtc_int: rtc-int { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb2-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb2-v10.dts index 98d5d00..dfc756d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-evb2-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-evb2-v10.dts @@ -375,6 +375,9 @@ }; &hdmi { + frl-enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -832,6 +835,12 @@ }; }; + hdmi { + hdmi_tx_on_h: hdmi-tx-on-h { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { rtc_int: rtc-int { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts b/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts index 6863037..3121a0b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts @@ -4,6 +4,7 @@ #include #include +#include #include "rk3576.dtsi" / { @@ -17,6 +18,575 @@ chosen { stdout-path = "serial0:1500000n8"; }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + vcc5v0_device: regulator-vcc5v0-device { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_device"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; + vin-supply = <&vcc5v0_device>; + }; + + vcc_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc_sys>; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_2v0_pldo_s3"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + vin-supply = <&vcc_sys>; + }; + + vcc_wifi_reg_on: regulator-wifi-reg-on { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&wifi_reg_on>; + pinctrl-names = "default"; + regulator-name = "wifi_reg_on"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_s3>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_psu { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&hdptxphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + rk806: pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + wakeup-source; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_rst>; + reset-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_s3>; + status = "okay"; + + pcie@0,0 { + reg = <0x0 0 0 0 0>; + bus-range = <0x0 0xf>; + device_type = "pci"; + ranges; + #address-cells = <3>; + #size-cells = <2>; + + wifi: wifi@0,0 { + compatible = "pci14e4,449d"; + reg = <0x10000 0 0 0 0>; + clocks = <&hym8563>; + clock-names = "lpo"; + }; + }; +}; + +&pinctrl { + bluetooth { + bt_reg_on: bt-reg-on { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie0 { + pcie0_rst: pcie0-rst { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on: wifi-reg-on { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_wake_host: wifi-wake-host { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; }; &sdhci { @@ -29,6 +599,56 @@ status = "okay"; }; +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + &uart0 { status = "okay"; }; + +&uart5 { + pinctrl-0 = <&uart5m1_xfer &uart5m1_ctsn &uart5m1_rtsn>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&hym8563>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>; + pinctrl-names = "default"; + shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + vbat-supply = <&vcc_3v3_s3>; + vddio-supply = <&vcc_1v8_s3>; + }; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi index 749f0a5..4fc8496 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi @@ -26,7 +26,6 @@ hdmi-con { compatible = "hdmi-connector"; - hdmi-pwr-supply = <&vcc_5v0_hdmi>; type = "a"; port { @@ -138,22 +137,6 @@ }; }; - vcc_5v0_hdmi: regulator-vcc-5v0-hdmi { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_con_en>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-name = "vcc_5v0_hdmi"; - vin-supply = <&vcc_5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - vcc_5v0_host: regulator-vcc-5v0-host { compatible = "regulator-fixed"; enable-active-high; @@ -231,6 +214,9 @@ }; &hdmi { + frl-enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -655,7 +641,7 @@ &pinctrl { hdmi { - hdmi_con_en: hdmi-con-en { + hdmi_tx_on_h: hdmi-tx-on-h { rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts index 7406a4a..227fe6f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts @@ -327,6 +327,9 @@ }; &hdmi { + frl-enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -813,6 +816,12 @@ }; }; + hdmi { + hdmi_tx_on_h: hdmi-tx-on-h { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts index 7ec27b0..0a5cd5f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts @@ -70,7 +70,6 @@ hdmi-con { compatible = "hdmi-connector"; - hdmi-pwr-supply = <&vcc5v_hdmi_tx>; type = "a"; port { @@ -109,18 +108,6 @@ regulator-name = "vcc5v_dcin"; }; - vcc5v_hdmi_tx: regulator-vcc5v-hdmi-tx { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_tx_on_h>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-name = "vcc5v_hdmi_tx"; - vin-supply = <&vcc5v0_sys_s5>; - }; - vcc5v0_device_s0: regulator-vcc5v0-device-s0 { compatible = "regulator-fixed"; regulator-always-on; @@ -252,6 +239,9 @@ }; &hdmi { + frl-enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts index d0ab1d1..8411c16 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts @@ -283,6 +283,9 @@ }; &hdmi { + frl-enable-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -720,6 +723,12 @@ }; &pinctrl { + hdmi { + hdmi_tx_on_h: hdmi-tx-on-h { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { rtc_int_l: rtc-int-l { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; @@ -767,6 +776,7 @@ &uart0 { pinctrl-0 = <&uart0m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts index 899a84b..272af10 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts @@ -289,6 +289,9 @@ }; &hdmi { + frl-enable-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -720,6 +723,12 @@ }; &pinctrl { + hdmi { + hdmi_tx_on_h: hdmi-tx-on-h { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; @@ -824,6 +833,7 @@ &uart0 { pinctrl-0 = <&uart0m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index 28175d8..e12a2a0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi @@ -1281,10 +1281,10 @@ vdec: video-codec@27b00000 { compatible = "rockchip,rk3576-vdec"; - reg = <0x0 0x27b00100 0x0 0x500>, - <0x0 0x27b00000 0x0 0x100>, + reg = <0x0 0x27b00000 0x0 0x100>, + <0x0 0x27b00100 0x0 0x500>, <0x0 0x27b00600 0x0 0x100>; - reg-names = "function", "link", "cache"; + reg-names = "link", "function", "cache"; interrupts = ; clocks = <&cru ACLK_RKVDEC_ROOT>, <&cru HCLK_RKVDEC>, <&cru ACLK_RKVDEC_ROOT_BAK>, <&cru CLK_RKVDEC_CORE>, diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts index 39197ee..1005b15 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts @@ -177,6 +177,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -347,6 +351,12 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -778,6 +788,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts index 6ad2759..faeddcf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts @@ -162,6 +162,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -182,6 +186,10 @@ }; &hdmi1 { + frl-enable-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -330,6 +338,16 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -421,6 +439,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index 4fb8888..a22da66 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -1262,6 +1262,50 @@ #iommu-cells = <0>; }; + rga3_core0: rga@fdb60000 { + compatible = "rockchip,rk3588-rga3"; + reg = <0x0 0xfdb60000 0x0 0x200>; + interrupts = ; + clocks = <&cru ACLK_RGA3_0>, <&cru HCLK_RGA3_0>, <&cru CLK_RGA3_0_CORE>; + clock-names = "aclk", "hclk", "sclk"; + resets = <&cru SRST_RGA3_0_CORE>, <&cru SRST_A_RGA3_0>, <&cru SRST_H_RGA3_0>; + reset-names = "core", "axi", "ahb"; + power-domains = <&power RK3588_PD_RGA30>; + iommus = <&rga3_0_mmu>; + }; + + rga3_0_mmu: iommu@fdb60f00 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdb60f00 0x0 0x100>; + interrupts = ; + clocks = <&cru ACLK_RGA3_0>, <&cru HCLK_RGA3_0>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3588_PD_RGA30>; + }; + + rga3_core1: rga@fdb70000 { + compatible = "rockchip,rk3588-rga3"; + reg = <0x0 0xfdb70000 0x0 0x200>; + interrupts = ; + clocks = <&cru ACLK_RGA3_1>, <&cru HCLK_RGA3_1>, <&cru CLK_RGA3_1_CORE>; + clock-names = "aclk", "hclk", "sclk"; + resets = <&cru SRST_RGA3_1_CORE>, <&cru SRST_A_RGA3_1>, <&cru SRST_H_RGA3_1>; + reset-names = "core", "axi", "ahb"; + power-domains = <&power RK3588_PD_RGA31>; + iommus = <&rga3_1_mmu>; + }; + + rga3_1_mmu: iommu@fdb70f00 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdb70f00 0x0 0x100>; + interrupts = ; + clocks = <&cru ACLK_RGA3_1>, <&cru HCLK_RGA3_1>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3588_PD_RGA31>; + }; + rga: rga@fdb80000 { compatible = "rockchip,rk3588-rga", "rockchip,rk3288-rga"; reg = <0x0 0xfdb80000 0x0 0x180>; @@ -1355,10 +1399,10 @@ vdec0: video-codec@fdc38000 { compatible = "rockchip,rk3588-vdec"; - reg = <0x0 0xfdc38100 0x0 0x500>, - <0x0 0xfdc38000 0x0 0x100>, + reg = <0x0 0xfdc38000 0x0 0x100>, + <0x0 0xfdc38100 0x0 0x500>, <0x0 0xfdc38600 0x0 0x100>; - reg-names = "function", "link", "cache"; + reg-names = "link", "function", "cache"; interrupts = ; clocks = <&cru ACLK_RKVDEC0>, <&cru HCLK_RKVDEC0>, <&cru CLK_RKVDEC0_CA>, <&cru CLK_RKVDEC0_CORE>, <&cru CLK_RKVDEC0_HEVC_CA>; @@ -1387,10 +1431,10 @@ vdec1: video-codec@fdc40000 { compatible = "rockchip,rk3588-vdec"; - reg = <0x0 0xfdc40100 0x0 0x500>, - <0x0 0xfdc40000 0x0 0x100>, + reg = <0x0 0xfdc40000 0x0 0x100>, + <0x0 0xfdc40100 0x0 0x500>, <0x0 0xfdc40600 0x0 0x100>; - reg-names = "function", "link", "cache"; + reg-names = "link", "function", "cache"; interrupts = ; clocks = <&cru ACLK_RKVDEC1>, <&cru HCLK_RKVDEC1>, <&cru CLK_RKVDEC1_CA>, <&cru CLK_RKVDEC1_CORE>, <&cru CLK_RKVDEC1_HEVC_CA>; @@ -1430,6 +1474,149 @@ resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; }; + vicap: video-capture@fdce0000 { + compatible = "rockchip,rk3588-vicap"; + reg = <0x0 0xfdce0000 0x0 0x800>; + interrupts = ; + clocks = <&cru ACLK_VICAP>, <&cru HCLK_VICAP>, + <&cru DCLK_VICAP>, <&cru ICLK_CSIHOST0>, + <&cru ICLK_CSIHOST1>; + clock-names = "aclk", "hclk", "dclk", "iclk", "iclk1"; + iommus = <&vicap_mmu>; + power-domains = <&power RK3588_PD_VI>; + resets = <&cru SRST_A_VICAP>, <&cru SRST_H_VICAP>, + <&cru SRST_D_VICAP>, <&cru SRST_CSIHOST0_VICAP>, + <&cru SRST_CSIHOST1_VICAP>, + <&cru SRST_CSIHOST2_VICAP>, + <&cru SRST_CSIHOST3_VICAP>, + <&cru SRST_CSIHOST4_VICAP>, + <&cru SRST_CSIHOST5_VICAP>; + reset-names = "arst", "hrst", "drst", "irst0", "irst1", + "irst2", "irst3", "irst4", "irst5"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + vicap_dvp: port@0 { + reg = <0x0>; + }; + + vicap_mipi0: port@1 { + reg = <0x1>; + }; + + vicap_mipi1: port@2 { + reg = <0x2>; + }; + + vicap_mipi2: port@3 { + reg = <0x3>; + + vicap_mipi2_input: endpoint { + remote-endpoint = <&csi2_output>; + }; + }; + + vicap_mipi3: port@4 { + reg = <0x4>; + }; + + vicap_mipi4: port@5 { + reg = <0x5>; + + vicap_mipi4_input: endpoint { + remote-endpoint = <&csi4_output>; + }; + }; + + vicap_mipi5: port@6 { + reg = <0x6>; + }; + + vicap_toisp0: port@10 { + reg = <0x10>; + }; + + vicap_toisp1: port@11 { + reg = <0x11>; + }; + }; + }; + + vicap_mmu: iommu@fdce0800 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdce0800 0x0 0x40>, <0x0 0xfdce0900 0x0 0x40>; + interrupts = ; + clocks = <&cru ACLK_VICAP>, <&cru HCLK_VICAP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3588_PD_VI>; + rockchip,disable-mmu-reset; + status = "disabled"; + }; + + csi2: csi@fdd30000 { + compatible = "rockchip,rk3588-mipi-csi2", "rockchip,rk3568-mipi-csi2"; + reg = <0x0 0xfdd30000 0x0 0x10000>; + interrupts = , + ; + interrupt-names = "err1", "err2"; + clocks = <&cru PCLK_CSI_HOST_2>; + phys = <&csi_dphy0>; + power-domains = <&power RK3588_PD_VI>; + resets = <&cru SRST_P_CSI_HOST_2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_in: port@0 { + reg = <0>; + }; + + csi2_out: port@1 { + reg = <1>; + + csi2_output: endpoint { + remote-endpoint = <&vicap_mipi2_input>; + }; + }; + }; + }; + + csi4: csi@fdd50000 { + compatible = "rockchip,rk3588-mipi-csi2", "rockchip,rk3568-mipi-csi2"; + reg = <0x0 0xfdd50000 0x0 0x10000>; + interrupts = , + ; + interrupt-names = "err1", "err2"; + clocks = <&cru PCLK_CSI_HOST_4>; + phys = <&csi_dphy1>; + power-domains = <&power RK3588_PD_VI>; + resets = <&cru SRST_P_CSI_HOST_4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi4_in: port@0 { + reg = <0>; + }; + + csi4_out: port@1 { + reg = <1>; + + csi4_output: endpoint { + remote-endpoint = <&vicap_mipi4_input>; + }; + }; + }; + }; + vop: vop@fdd90000 { compatible = "rockchip,rk3588-vop"; reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts index 3d5c8b7..66e3c20 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts @@ -125,6 +125,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -145,8 +149,10 @@ }; &hdmi1 { + frl-enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd &hdmim1_tx1_scl &hdmim1_tx1_sda + &hdmi1_tx_on_h>; pinctrl-names = "default"; - pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd &hdmim1_tx1_scl &hdmim1_tx1_sda>; status = "okay"; }; @@ -211,6 +217,16 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + lcd { lcdpwr_en: lcdpwr-en { rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts index 738637e..37d7b82 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts @@ -184,7 +184,10 @@ /* HDMI CEC is not used */ &hdmi0 { - pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>; + frl-enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda + &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -277,6 +280,12 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + lcd { lcdpwr_en: lcdpwr-en { rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; @@ -326,6 +335,7 @@ &pwm6 { pinctrl-0 = <&pwm6m1_pins>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi index b075433..33dacaa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi @@ -143,6 +143,7 @@ &i2c0 { pinctrl-0 = <&i2c0m2_xfer>; + pinctrl-names = "default"; status = "okay"; vdd_cpu_big0_s0: regulator@42 { @@ -219,6 +220,7 @@ &i2c7 { pinctrl-0 = <&i2c7m0_xfer>; + pinctrl-names = "default"; status = "okay"; es8316: audio-codec@10 { @@ -244,6 +246,7 @@ &i2s0_sclk &i2s0_sdi0 &i2s0_sdo0>; + pinctrl-names = "default"; status = "okay"; i2s0_8ch_p0: port { @@ -656,5 +659,6 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi index 0892034..2751f84 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi @@ -252,6 +252,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index 09bc7b6..8969b56 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -360,6 +360,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -376,6 +380,10 @@ }; &hdmi1 { + frl-enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -502,6 +510,7 @@ &i2s0_sclk &i2s0_sdi0 &i2s0_sdo0>; + pinctrl-names = "default"; status = "okay"; }; @@ -612,6 +621,16 @@ }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hdmirx { hdmirx_hpd: hdmirx-5v-detection { rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -1368,6 +1387,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts index 60ba6ac..059ab02 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts @@ -143,6 +143,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -183,6 +187,12 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; @@ -911,6 +921,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi index 4331cdc..d3fb267 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi @@ -558,5 +558,6 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi index 80e16ea..ecb27b4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi @@ -443,5 +443,6 @@ /* rk3588 preferred debug out */ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi index 6726eeb..80ca7e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi @@ -439,5 +439,6 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts b/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts index e086114..8dac069 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts @@ -322,6 +322,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -487,6 +491,12 @@ }; }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; @@ -558,11 +568,13 @@ /* uart/232/485 */ &uart0 { pinctrl-0 = <&uart0m2_xfer>; + pinctrl-names = "default"; status = "okay"; }; &uart1 { pinctrl-0 = <&uart1m1_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts index 10a7d36..0dce96c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts @@ -331,6 +331,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -347,6 +351,10 @@ }; &hdmi1 { + frl-enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -520,6 +528,16 @@ }; }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hdmirx { hdmirx_hpd: hdmirx-5v-detection { rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts b/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts index 73d8ce4..3811f9a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts @@ -210,6 +210,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -339,6 +343,12 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; @@ -774,6 +784,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts index 5f5d89a..41758fe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts @@ -278,8 +278,10 @@ &hdmi0 { /* No CEC on Jaguar */ + frl-enable-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda + &hdmi0_tx_on_h>; pinctrl-names = "default"; - pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>; status = "okay"; }; @@ -305,6 +307,7 @@ &i2c0 { pinctrl-0 = <&i2c0m2_xfer>; + pinctrl-names = "default"; status = "okay"; fan@18 { @@ -415,10 +418,12 @@ &i2c1 { pinctrl-0 = <&i2c1m4_xfer>; + pinctrl-names = "default"; }; &i2c6 { pinctrl-0 = <&i2c6m4_xfer>; + pinctrl-names = "default"; }; &i2c7 { @@ -437,6 +442,7 @@ &i2c8 { pinctrl-0 = <&i2c8m2_xfer>; + pinctrl-names = "default"; status = "okay"; typec-portc@22 { @@ -571,6 +577,12 @@ }; }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { led1_pin: led1-pin { rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; @@ -1046,18 +1058,21 @@ /* Mule-ATtiny debug UART; typically baudrate 9600 */ &uart0 { pinctrl-0 = <&uart0m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; /* Main debug interface on P20 micro-USB B port and P21 header */ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; /* RS485 on P19 */ &uart3 { pinctrl-0 = <&uart3m2_xfer &uart3_rtsn>; + pinctrl-names = "default"; linux,rs485-enabled-at-boot-time; status = "okay"; }; @@ -1065,6 +1080,7 @@ /* Mule-ATtiny UPDI flashing UART */ &uart7 { pinctrl-0 = <&uart7m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; @@ -1134,9 +1150,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - usb_host0_xhci_drd_sw: endpoint { remote-endpoint = <&usbc0_hs>; }; @@ -1149,9 +1162,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - usb_host1_xhci_drd_sw: endpoint { remote-endpoint = <&usbc1_hs>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts b/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts index 78a4e89..9052e0d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts @@ -148,6 +148,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -181,6 +185,7 @@ &pcie2x1l2 { pinctrl-0 = <&pcie2_0_rst>; + pinctrl-names = "default"; reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -205,6 +210,12 @@ }; }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie2 { pcie2_0_rst: pcie2-0-rst { rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; @@ -226,6 +237,7 @@ &pwm8 { pinctrl-0 = <&pwm8m2_pins>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi index 84b6b53..7495af5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi @@ -361,6 +361,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -381,6 +385,10 @@ }; &hdmi1 { + frl-enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -571,6 +579,7 @@ &i2c8 { pinctrl-0 = <&i2c8m2_xfer>; + pinctrl-names = "default"; }; &i2s0_8ch { @@ -682,6 +691,16 @@ }; }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hdmirx { hdmirx_hpd: hdmirx-5v-detection { rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -745,6 +764,7 @@ &pwm1 { pinctrl-0 = <&pwm1m1_pins>; + pinctrl-names = "default"; status = "okay"; }; @@ -1156,6 +1176,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts index 8b1d357..762f9fd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts @@ -35,6 +35,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -55,9 +59,10 @@ }; &hdmi1 { - pinctrl-names = "default"; + frl-enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd - &hdmim1_tx1_scl &hdmim1_tx1_sda>; + &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -102,6 +107,15 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; usb { usb_otg_pwren: usb-otg-pwren { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index 9950d11..1459866 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -121,6 +121,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -141,6 +145,10 @@ }; &hdmi1 { + frl-enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -278,6 +286,16 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -333,6 +351,7 @@ &pwm3 { pinctrl-0 = <&pwm3m1_pins>; + pinctrl-names = "default"; status = "okay"; }; @@ -351,6 +370,7 @@ &uart9 { pinctrl-0 = <&uart9m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts index f8c6c08..2b693df 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts @@ -25,9 +25,10 @@ }; &hdmi1 { - pinctrl-names = "default"; + frl-enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd - &hdmim1_tx1_scl &hdmim1_tx1_sda>; + &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -64,6 +65,12 @@ }; &pinctrl { + hdmi { + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb { usb_otg_pwren: usb-otg-pwren { rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi index 3bceee9..4e9fe87 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi @@ -822,6 +822,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts b/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts index 2d6fed2..02d532c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts @@ -325,6 +325,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -345,6 +349,10 @@ }; &hdmi1 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -583,6 +591,16 @@ }; }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; @@ -1041,6 +1059,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts index f7dd01d..6f25e08 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts @@ -346,8 +346,10 @@ }; &hdmi1 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd - &hdmim1_tx1_scl &hdmim1_tx1_sda>; + &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -433,7 +435,6 @@ reg = <0x42>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_npu_s0"; - regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; @@ -695,7 +696,17 @@ domain-supply = <&vdd_gpu_s0>; }; +&pd_npu { + domain-supply = <&vdd_npu_s0>; +}; + &pinctrl { + hdmi { + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { rtc_int: rtc-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -814,6 +825,36 @@ }; }; +&rknn_core_0 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_s0>; + status = "okay"; +}; + +&rknn_core_1 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_s0>; + status = "okay"; +}; + +&rknn_core_2 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_s0>; + status = "okay"; +}; + +&rknn_mmu_0 { + status = "okay"; +}; + +&rknn_mmu_1 { + status = "okay"; +}; + +&rknn_mmu_2 { + status = "okay"; +}; + &pwm14 { pinctrl-names = "default"; pinctrl-0 = <&pwm14m1_pins>; @@ -886,6 +927,7 @@ &spdif_tx1 { pinctrl-0 = <&spdif1m2_tx>; + pinctrl-names = "default"; status = "okay"; }; @@ -1220,6 +1262,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi index bf4a1d2..13aaf63 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi @@ -183,6 +183,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -203,8 +207,10 @@ }; &hdmi1 { + frl-enable-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd - &hdmim1_tx1_scl &hdmim1_tx1_sda>; + &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -505,6 +511,16 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hdmi1_tx_on_h: hdmi1-tx-on-h { + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -959,6 +975,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus-radxa-cam4k-cam0.dtso b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus-radxa-cam4k-cam0.dtso new file mode 100644 index 0000000..ee9ecf6 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus-radxa-cam4k-cam0.dtso @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree overlay for the Radxa Camera 4K attached to the CAM0 port of + * the Radxa ROCK 5B+. + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include + +&{/} { + savdd_cam0: regulator-savdd-cam0 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-name = "savdd_cam0"; + vin-supply = <&vcc_3v3_s3>; + }; + + sdvdd_cam0: regulator-sdvdd-cam0 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "sdvdd_cam0"; + vin-supply = <&vcc5v0_sys>; + }; + + siovdd_cam0: regulator-siovdd-cam0 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "siovdd_cam0"; + vin-supply = <&vcc_3v3_s3>; + }; +}; + +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + imx415: camera-sensor@1a { + compatible = "sony,imx415"; + reg = <0x1a>; + assigned-clocks = <&cru CLK_MIPI_CAMARAOUT_M3>; + assigned-clock-rates = <37125000>; + avdd-supply = <&savdd_cam0>; + clocks = <&cru CLK_MIPI_CAMARAOUT_M3>; + dvdd-supply = <&sdvdd_cam0>; + orientation = <2>; /* External */ + ovdd-supply = <&siovdd_cam0>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_rstn &mipim0_camera3_clk>; + reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + + port { + imx415_output: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <445500000>; + remote-endpoint = <&csi2_input>; + }; + }; + }; +}; + +&pinctrl { + cam0 { + cam0_rstn: cam0-rstn-pinctrl { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&csi2 { + status = "okay"; +}; + +&csi2_in { + csi2_input: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <445500000>; + remote-endpoint = <&imx415_output>; + }; +}; + +&csi_dphy0 { + status = "okay"; +}; + +&vicap { + status = "okay"; +}; + +&vicap_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus-radxa-cam4k-cam1.dtso b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus-radxa-cam4k-cam1.dtso new file mode 100644 index 0000000..8a4cf3f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus-radxa-cam4k-cam1.dtso @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree overlay for the Radxa Camera 4K attached to the CAM1 port of + * the Radxa ROCK 5B+. + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include + +&{/} { + savdd_cam1: regulator-savdd-cam1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-name = "savdd_cam1"; + vin-supply = <&vcc_3v3_s3>; + }; + + sdvdd_cam1: regulator-sdvdd-cam1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "sdvdd_cam1"; + vin-supply = <&vcc5v0_sys>; + }; + + siovdd_cam1: regulator-siovdd-cam1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "siovdd_cam1"; + vin-supply = <&vcc_3v3_s3>; + }; +}; + +&i2c4 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + cam1_imx415: camera-sensor@1a { + compatible = "sony,imx415"; + reg = <0x1a>; + assigned-clocks = <&cru CLK_MIPI_CAMARAOUT_M4>; + assigned-clock-rates = <37125000>; + avdd-supply = <&savdd_cam1>; + clocks = <&cru CLK_MIPI_CAMARAOUT_M4>; + dvdd-supply = <&sdvdd_cam1>; + orientation = <2>; /* External */ + ovdd-supply = <&siovdd_cam1>; + pinctrl-names = "default"; + pinctrl-0 = <&cam1_rstn &mipim0_camera4_clk>; + reset-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; + + port { + cam1_imx415_output: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <445500000>; + remote-endpoint = <&csi4_input>; + }; + }; + }; +}; + +&pinctrl { + cam1 { + cam1_rstn: cam1-rstn-pinctrl { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&csi4 { + status = "okay"; +}; + +&csi4_in { + csi4_input: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <445500000>; + remote-endpoint = <&cam1_imx415_output>; + }; +}; + +&csi_dphy1 { + status = "okay"; +}; + +&vicap { + status = "okay"; +}; + +&vicap_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts index caa43d1..873fbeb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts @@ -172,8 +172,9 @@ * While HDMI-CEC is present on the Q7 connector, it is not * connected on Haikou itself. */ + pinctrl-0 = <&hdmim0_tx0_hpd &hdmim1_tx0_scl &hdmim1_tx0_sda + &hdmi0_tx_on_h>; pinctrl-names = "default"; - pinctrl-0 = <&hdmim0_tx0_hpd &hdmim1_tx0_scl &hdmim1_tx0_sda>; status = "okay"; }; @@ -273,6 +274,7 @@ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>; + pinctrl-names = "default"; sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi index a0e9748..139f70e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi @@ -148,13 +148,15 @@ }; &hdmi0 { - pinctrl-names = "default"; + frl-enable-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; pinctrl-0 = <&hdmim1_tx0_cec &hdmim0_tx0_hpd &hdmim1_tx0_scl - &hdmim1_tx0_sda>; + &hdmim1_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; }; &i2c1 { pinctrl-0 = <&i2c1m0_xfer>; + pinctrl-names = "default"; }; &i2c1m0_xfer { @@ -167,6 +169,7 @@ &i2c2 { pinctrl-0 = <&i2c2m3_xfer>; + pinctrl-names = "default"; }; &i2c2m3_xfer { @@ -179,10 +182,12 @@ &i2c3 { pinctrl-0 = <&i2c3m0_xfer>; + pinctrl-names = "default"; }; &i2c4 { pinctrl-0 = <&i2c4m4_xfer>; + pinctrl-names = "default"; status = "okay"; vdd_npu_s0: regulator@42 { @@ -204,6 +209,7 @@ &i2c5 { pinctrl-0 = <&i2c5m1_xfer>; + pinctrl-names = "default"; }; &i2c5m1_xfer { @@ -301,6 +307,7 @@ &i2c8 { pinctrl-0 = <&i2c8m2_xfer>; + pinctrl-names = "default"; }; &mdio0 { @@ -349,6 +356,12 @@ }; }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { module_led_pin: module-led-pin { rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; @@ -434,6 +447,7 @@ &spi0 { pinctrl-0 = <&spi0m1_cs0 &spi0m1_cs1 &spi0m3_pins>; + pinctrl-names = "default"; }; &spi2 { @@ -764,10 +778,12 @@ /* Routed to UART0 on the Q7 connector */ &uart2 { pinctrl-0 = <&uart2m2_xfer>; + pinctrl-names = "default"; }; /* Mule-ATtiny UPDI */ &uart4 { pinctrl-0 = <&uart4m2_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts index 5a428e0..85ac072 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts @@ -675,6 +675,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi index b11d24d..9d5d4cf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -704,11 +704,13 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; &uart9 { pinctrl-0 = <&uart9m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts index 189444d..2e8661a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts @@ -251,6 +251,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -272,6 +276,7 @@ &i2c0 { pinctrl-0 = <&i2c0m2_xfer>; + pinctrl-names = "default"; status = "okay"; vdd_cpu_big0_s0: regulator@42 { @@ -332,6 +337,7 @@ &i2c6 { pinctrl-0 = <&i2c6m3_xfer>; + pinctrl-names = "default"; status = "okay"; hym8563: rtc@51 { @@ -348,6 +354,7 @@ &i2c7 { pinctrl-0 = <&i2c7m0_xfer>; + pinctrl-names = "default"; status = "okay"; es8316: audio-codec@10 { @@ -373,6 +380,7 @@ &i2s0_sclk &i2s0_sdi0 &i2s0_sdo0>; + pinctrl-names = "default"; status = "okay"; i2s0_8ch_p0: port { @@ -396,6 +404,12 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; @@ -459,6 +473,7 @@ &pwm2 { pinctrl-0 = <&pwm2m1_pins>; + pinctrl-names = "default"; status = "okay"; }; @@ -865,6 +880,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts index d6b62cd..c4ddb78 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts @@ -457,6 +457,7 @@ &pwm12 { pinctrl-0 = <&pwm12m1_pins>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts index 8961839..230aac0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts @@ -302,9 +302,6 @@ hdmi0-con { compatible = "hdmi-connector"; - ddc-en-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&hdmi0_en>; - pinctrl-names = "default"; type = "d"; port { @@ -514,8 +511,9 @@ &hdmi0 { no-hpd; + frl-enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-0 = <&hdmim0_tx0_cec>, <&hdmim0_tx0_scl>, - <&hdmim0_tx0_sda>; + <&hdmim0_tx0_sda>, <&hdmi0_tx_on_h>; pinctrl-names = "default"; status = "okay"; }; @@ -616,6 +614,7 @@ &i2c4 { pinctrl-0 = <&i2c4m2_xfer>; + pinctrl-names = "default"; status = "okay"; ti_adc: adc@48 { @@ -652,6 +651,7 @@ &i2c6 { pinctrl-0 = <&i2c6m3_xfer>; + pinctrl-names = "default"; status = "okay"; fusb302: typec@22 { @@ -785,6 +785,7 @@ &i2s0_sclk &i2s0_sdi0 &i2s0_sdo0>; + pinctrl-names = "default"; status = "okay"; }; @@ -893,7 +894,7 @@ }; hdmi { - hdmi0_en: hdmi0-en { + hdmi0_tx_on_h: hdmi0-tx-on-h { rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -1028,11 +1029,13 @@ &pwm12 { pinctrl-0 = <&pwm12m1_pins>; + pinctrl-names = "default"; status = "okay"; }; &pwm13 { pinctrl-0 = <&pwm13m1_pins>; + pinctrl-names = "default"; status = "okay"; }; @@ -1434,11 +1437,13 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; &uart9 { pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>; + pinctrl-names = "default"; uart-has-rtscts; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index 174d299..ed36c27 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -277,8 +277,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; pinctrl-0 = <&hdmim0_tx0_scl>, <&hdmim0_tx0_sda>, - <&hdmim0_tx0_hpd>, <&hdmim0_tx0_cec>; + <&hdmim0_tx0_hpd>, <&hdmim0_tx0_cec>, + <&hdmi0_tx_on_h>; pinctrl-names = "default"; status = "okay"; }; @@ -366,6 +368,7 @@ &i2c6 { pinctrl-0 = <&i2c6m3_xfer>; + pinctrl-names = "default"; status = "okay"; fusb302: typec-portc@22 { @@ -438,6 +441,7 @@ &i2c7 { pinctrl-0 = <&i2c7m0_xfer>; + pinctrl-names = "default"; status = "okay"; es8388: audio-codec@11 { @@ -517,6 +521,12 @@ }; }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { @@ -965,6 +975,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts index 2c22aba..833f27f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts @@ -194,6 +194,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -217,10 +221,6 @@ status = "okay"; }; -&hdmi0_sound { - status = "okay"; -}; - &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; @@ -282,6 +282,12 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + vdd_sd { vdd_sd_en: vdd-sd-en { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; @@ -736,6 +742,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi index 1b6a59f..91b6eef 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi @@ -236,6 +236,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -404,6 +408,12 @@ }; }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { rtc_int: rtc-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; @@ -841,6 +851,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts index a72063c..4e98fa3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts @@ -249,6 +249,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -438,6 +442,12 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + lcd { lcd_pwren: lcd-pwren { rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi index dafad29..9da13f9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi @@ -181,6 +181,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -381,6 +385,12 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -837,6 +847,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5-base.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5-base.dts index 06120b2..0145e19 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5-base.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5-base.dts @@ -143,10 +143,11 @@ }; &hdmi0 { - pinctrl-names = "default"; + frl-enable-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>; pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda - &hdmi_frl_pin>; + &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -172,6 +173,7 @@ &i2c1 { pinctrl-0 = <&i2c1m2_xfer>; + pinctrl-names = "default"; status = "okay"; rtc@51 { @@ -245,8 +247,8 @@ }; hdmi { - hdmi_frl_pin: hdmi-frl-pin { - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -279,6 +281,7 @@ &pwm5 { pinctrl-0 = <&pwm5m1_pins>; + pinctrl-names = "default"; status = "okay"; }; @@ -319,6 +322,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5.dtsi index 32357eb..5d3dc21 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5.dtsi @@ -64,6 +64,7 @@ &i2c0 { pinctrl-0 = <&i2c0m2_xfer>; + pinctrl-names = "default"; status = "okay"; vdd_cpu_big0_s0: regulator@42 { @@ -142,6 +143,7 @@ assigned-clock-rates = <200000000>; num-cs = <1>; pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + pinctrl-names = "default"; status = "okay"; pmic@0 { @@ -468,5 +470,6 @@ * through the CRU. */ pinctrl-0 = <&tsadc_gpio_func>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts index f80d5a0..af4a9bc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts @@ -120,6 +120,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -217,6 +221,12 @@ }; }; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts index 7e17986..d534d66 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts @@ -224,6 +224,10 @@ }; &hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -367,9 +371,9 @@ }; &pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -379,6 +383,12 @@ }; }; + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + leds { led_pins: led-pins { rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, @@ -800,6 +810,7 @@ &uart7 { pinctrl-0 = <&uart7m2_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index 0991f6a..a76734d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -323,11 +323,13 @@ }; &hdmi0 { - pinctrl-names = "default"; + frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; pinctrl-0 = <&hdmim0_tx0_cec &hdmim1_tx0_hpd &hdmim0_tx0_scl - &hdmim0_tx0_sda>; + &hdmim0_tx0_sda + &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -373,6 +375,12 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { io_led: io-led { rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -819,6 +827,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts index 7fe42f4..e478488 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts @@ -258,11 +258,13 @@ }; &hdmi0 { - pinctrl-names = "default"; + frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; pinctrl-0 = <&hdmim0_tx0_cec &hdmim1_tx0_hpd &hdmim0_tx0_scl - &hdmim0_tx0_sda>; + &hdmim0_tx0_sda + &hdmi0_tx_on_h>; + pinctrl-names = "default"; status = "okay"; }; @@ -461,6 +463,12 @@ }; &pinctrl { + hdmi { + hdmi0_tx_on_h: hdmi0-tx-on-h { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { led_pins: led-pins { rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>, @@ -922,6 +930,7 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi index 673fbc5..9c63fdb 100644 --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi @@ -1202,7 +1202,7 @@ sai1: sai@40290000 { compatible = "st,stm32mp25-sai"; - reg = <0x40290000 0x4>, <0x4029a3f0 0x10>; + reg = <0x40290000 0x4>, <0x402903f0 0x10>; ranges = <0 0x40290000 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -1236,7 +1236,7 @@ sai2: sai@402a0000 { compatible = "st,stm32mp25-sai"; - reg = <0x402a0000 0x4>, <0x402aa3f0 0x10>; + reg = <0x402a0000 0x4>, <0x402a03f0 0x10>; ranges = <0 0x402a0000 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -1270,7 +1270,7 @@ sai3: sai@402b0000 { compatible = "st,stm32mp25-sai"; - reg = <0x402b0000 0x4>, <0x402ba3f0 0x10>; + reg = <0x402b0000 0x4>, <0x402b03f0 0x10>; ranges = <0 0x402b0000 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -1362,7 +1362,7 @@ sai4: sai@40340000 { compatible = "st,stm32mp25-sai"; - reg = <0x40340000 0x4>, <0x4034a3f0 0x10>; + reg = <0x40340000 0x4>, <0x403403f0 0x10>; ranges = <0 0x40340000 0x400>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 5269c96..371f9a0 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -9,18 +9,50 @@ # alphabetically. # Boards with AM62x SoC +k3-am625-verdin-nonwifi-dahlia-dsi-to-hdmi-dtbs := k3-am625-verdin-nonwifi-dahlia.dtb \ + k3-am625-verdin-dsi-to-hdmi.dtbo +k3-am625-verdin-nonwifi-dahlia-panel-cap-touch-10inch-dsi-dtbs := \ + k3-am625-verdin-nonwifi-dahlia.dtb \ + k3-am625-verdin-panel-cap-touch-10inch-dsi.dtbo +k3-am625-verdin-nonwifi-dev-dsi-to-hdmi-dtbs := k3-am625-verdin-nonwifi-dev.dtb \ + k3-am625-verdin-dsi-to-hdmi.dtbo +k3-am625-verdin-wifi-dahlia-dsi-to-hdmi-dtbs := k3-am625-verdin-wifi-dahlia.dtb \ + k3-am625-verdin-dsi-to-hdmi.dtbo +k3-am625-verdin-wifi-dahlia-panel-cap-touch-10inch-dsi-dtbs := \ + k3-am625-verdin-wifi-dahlia.dtb \ + k3-am625-verdin-panel-cap-touch-10inch-dsi.dtbo +k3-am625-verdin-wifi-dev-dsi-to-hdmi-dtbs := k3-am625-verdin-wifi-dev.dtb \ + k3-am625-verdin-dsi-to-hdmi.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-ov5640.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-tevi-ov5640.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-tqma62xx-mba62xx.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-mezzanine-can.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-nau8822-btl.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-hdmi.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia-dsi-to-hdmi.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia-panel-cap-touch-10inch-dsi.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev-dsi-to-hdmi.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-ivy.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-mallow.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-zinnia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-ov5640-24mhz.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-ov5640.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-10inch-dsi.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-10inch-lvds.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-7inch-dsi.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-uart4-mcu.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia-dsi-to-hdmi.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia-panel-cap-touch-10inch-dsi.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev-dsi-to-hdmi.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-ivy.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb @@ -29,6 +61,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-zinnia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-nand.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am62-phyboard-lyra-oldi-lcd185.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am62-pocketbeagle2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6254atl-sk.dtb @@ -183,6 +216,8 @@ k3-am625-phyboard-lyra-disable-spi-nor-dtbs := k3-am625-phyboard-lyra-rdk.dtb \ k3-am6xx-phycore-disable-spi-nor.dtbo k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \ k3-am62x-phyboard-lyra-gpio-fan.dtbo +k3-am625-phyboard-lyra-oldi-lcd185-dtbs := k3-am625-phyboard-lyra-rdk.dtb \ + k3-am62-phyboard-lyra-oldi-lcd185.dtbo k3-am625-phyboard-lyra-qspi-nor-dtbs := k3-am625-phyboard-lyra-rdk.dtb \ k3-am6xx-phycore-qspi-nor.dtbo k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \ @@ -192,6 +227,28 @@ k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \ k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \ k3-am62x-sk-csi2-tevi-ov5640.dtbo k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo +k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch-dtbs := \ + k3-am625-verdin-wifi-dev.dtb \ + k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo +k3-am625-verdin-wifi-dev-mezzanine-can-dtbs := k3-am625-verdin-wifi-dev.dtb \ + k3-am625-verdin-dev-mezzanine-can.dtbo +k3-am625-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-dtbs := \ + k3-am625-verdin-wifi-dev.dtb \ + k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo +k3-am625-verdin-wifi-dev-nau8822-btl-dtbs := k3-am625-verdin-wifi-dev.dtb \ + k3-am625-verdin-dev-nau8822-btl.dtbo +k3-am625-verdin-wifi-dev-ov5640-24mhz-dtbs := k3-am625-verdin-wifi-dev.dtb \ + k3-am625-verdin-ov5640-24mhz.dtbo +k3-am625-verdin-wifi-dev-ov5640-dtbs := k3-am625-verdin-wifi-dev.dtb \ + k3-am625-verdin-ov5640.dtbo +k3-am625-verdin-wifi-dev-panel-cap-touch-7inch-dsi-dtbs := \ + k3-am625-verdin-wifi-dev.dtb \ + k3-am625-verdin-panel-cap-touch-7inch-dsi.dtbo +k3-am625-verdin-wifi-dev-uart4-mcu-dtbs := k3-am625-verdin-wifi-dev.dtb \ + k3-am625-verdin-uart4-mcu.dtbo +k3-am625-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-dtbs := \ + k3-am625-verdin-wifi-mallow.dtb \ + k3-am625-verdin-panel-cap-touch-10inch-lvds.dtbo k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo k3-am62-lp-sk-nand-dtbs := k3-am62-lp-sk.dtb k3-am62-lp-sk-nand.dtbo k3-am62a7-phyboard-lyra-disable-eth-phy-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \ @@ -287,11 +344,21 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ k3-am625-phyboard-lyra-disable-rtc.dtb \ k3-am625-phyboard-lyra-disable-spi-nor.dtb \ k3-am625-phyboard-lyra-gpio-fan.dtb \ + k3-am625-phyboard-lyra-oldi-lcd185.dtb \ k3-am625-phyboard-lyra-qspi-nor.dtb \ k3-am625-sk-csi2-imx219.dtb \ k3-am625-sk-csi2-ov5640.dtb \ k3-am625-sk-csi2-tevi-ov5640.dtb \ k3-am625-sk-hdmi-audio.dtb \ + k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb \ + k3-am625-verdin-wifi-dev-mezzanine-can.dtb \ + k3-am625-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds.dtb \ + k3-am625-verdin-wifi-dev-nau8822-btl.dtb \ + k3-am625-verdin-wifi-dev-ov5640-24mhz.dtb \ + k3-am625-verdin-wifi-dev-ov5640.dtb \ + k3-am625-verdin-wifi-dev-panel-cap-touch-7inch-dsi.dtb \ + k3-am625-verdin-wifi-dev-uart4-mcu.dtb \ + k3-am625-verdin-wifi-mallow-panel-cap-touch-10inch-lvds.dtb \ k3-am62-lp-sk-hdmi-audio.dtb \ k3-am62-lp-sk-nand.dtb \ k3-am62a7-phyboard-lyra-disable-eth-phy.dtb \ diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index 8a556fb..dfd65c0 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -206,6 +206,7 @@ interrupt-parent = <&gic500>; interrupts = ; + system-power-controller; regulators { buck1_reg: buck1 { diff --git a/arch/arm64/boot/dts/ti/k3-am62-phyboard-lyra-oldi-lcd185.dtso b/arch/arm64/boot/dts/ti/k3-am62-phyboard-lyra-oldi-lcd185.dtso new file mode 100644 index 0000000..d9f75ff --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-phyboard-lyra-oldi-lcd185.dtso @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2022-2026 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include +#include "k3-pinctrl.h" + +&{/} { + display { + compatible = "lincolntech,lcd185-101ct"; + backlight = <&backlight>; + power-supply = <&vdd_usb_5v0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + lcd_in0: endpoint { + remote-endpoint = <&oldi_0_out>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + lcd_in1: endpoint { + remote-endpoint = <&oldi_1_out>; + }; + }; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio_exp 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwm_pins_default>; + pwms = <&epwm0 1 50000 0>; + }; + + vdd_usb_5v0: regulator-vdd-usb5v0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-usb5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&main_oldi0_pins_default>, <&main_dss0_pins_default>; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + /* VP1: Output to OLDI */ + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dpi0_out0: endpoint@0 { + reg = <0>; + remote-endpoint = <&oldi_0_in>; + }; + + dpi0_out1: endpoint@1 { + reg = <1>; + remote-endpoint = <&oldi_1_in>; + }; + }; +}; + +&epwm0 { + status = "okay"; +}; + +&main_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_screen_pins_default>; + + interrupt-parent = <&main_gpio0>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&main_gpio0 18 GPIO_ACTIVE_HIGH>; + irq-gpios = <&main_gpio0 19 GPIO_ACTIVE_HIGH>; + }; +}; + +&main_pmx0 { + bl_pwm_pins_default: bl-pwm-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01b8, PIN_INPUT, 2) /* (C13) SPI0_CS1.EHRPWM0_B */ + >; + }; + + touch_screen_pins_default: touch-screen-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x048, PIN_OUTPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 - RST */ + AM62X_IOPAD(0x04c, PIN_INPUT, 7) /* (P24) GPMC0_AD4.GPIO0_19 - INT */ + >; + }; + + main_oldi0_pins_default: main-oldi0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0260, PIN_OUTPUT, 0) /* (AA5) OLDI0_A0N */ + AM62X_IOPAD(0x025c, PIN_OUTPUT, 0) /* (Y6) OLDI0_A0P */ + AM62X_IOPAD(0x0268, PIN_OUTPUT, 0) /* (AD3) OLDI0_A1N */ + AM62X_IOPAD(0x0264, PIN_OUTPUT, 0) /* (AB4) OLDI0_A1P */ + AM62X_IOPAD(0x0270, PIN_OUTPUT, 0) /* (Y8) OLDI0_A2N */ + AM62X_IOPAD(0x026c, PIN_OUTPUT, 0) /* (AA8) OLDI0_A2P */ + AM62X_IOPAD(0x0278, PIN_OUTPUT, 0) /* (AB6) OLDI0_A3N */ + AM62X_IOPAD(0x0274, PIN_OUTPUT, 0) /* (AA7) OLDI0_A3P */ + AM62X_IOPAD(0x0280, PIN_OUTPUT, 0) /* (AC6) OLDI0_A4N */ + AM62X_IOPAD(0x027c, PIN_OUTPUT, 0) /* (AC5) OLDI0_A4P */ + AM62X_IOPAD(0x0288, PIN_OUTPUT, 0) /* (AE5) OLDI0_A5N */ + AM62X_IOPAD(0x0284, PIN_OUTPUT, 0) /* (AD6) OLDI0_A5P */ + AM62X_IOPAD(0x0290, PIN_OUTPUT, 0) /* (AE6) OLDI0_A6N */ + AM62X_IOPAD(0x028c, PIN_OUTPUT, 0) /* (AD7) OLDI0_A6P */ + AM62X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AD8) OLDI0_A7N */ + AM62X_IOPAD(0x0294, PIN_OUTPUT, 0) /* (AE7) OLDI0_A7P */ + AM62X_IOPAD(0x02a0, PIN_OUTPUT, 0) /* (AD4) OLDI0_CLK0N */ + AM62X_IOPAD(0x029c, PIN_OUTPUT, 0) /* (AE3) OLDI0_CLK0P */ + AM62X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (AE4) OLDI0_CLK1N */ + AM62X_IOPAD(0x02a4, PIN_OUTPUT, 0) /* (AD5) OLDI0_CLK1P */ + >; + }; +}; + +&oldi0 { + ti,companion-oldi = <&oldi1>; + status = "okay"; +}; + +&oldi0_port0 { + oldi_0_in: endpoint { + remote-endpoint = <&dpi0_out0>; + }; +}; + +&oldi0_port1 { + oldi_0_out: endpoint { + remote-endpoint = <&lcd_in0>; + }; +}; + +&oldi1 { + ti,secondary-oldi; + status = "okay"; +}; + +&oldi1_port0 { + oldi_1_in: endpoint { + remote-endpoint = <&dpi0_out1>; + }; +}; + +&oldi1_port1 { + oldi_1_out: endpoint { + remote-endpoint = <&lcd_in1>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts b/arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts new file mode 100644 index 0000000..efc00d2 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts @@ -0,0 +1,1033 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (c) 2023-2026 TQ-Systems GmbH , D-82229 Seefeld, Germany. + * Author: Nora Schiffer + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "k3-am625-tqma62xx.dtsi" + +/ { + compatible = "tq,am625-tqma6254-mba62xx", "tq,am625-tqma6254", + "ti,am625"; + model = "TQ-Systems TQMa62xx SoM on MBa62xx carrier board"; + chassis-type = "embedded"; + + aliases { + can0 = &mcu_mcan0; + can1 = &mcu_mcan1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; + i2c1 = &main_i2c1; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + serial0 = &main_uart0; + serial1 = &mcu_uart0; + spi1 = &main_spi0; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + stdout-path = &main_uart0; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + enable-gpios = <&main_gpio0 38 GPIO_ACTIVE_HIGH>; + /* Enabled by display overlays */ + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins>; + + user-button { + label = "USER_BUTTON"; + linux,code = ; + gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_led_pins>; + + led-1 { + gpios = <&main_gpio0 41 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + }; + + led-2 { + gpios = <&main_gpio0 42 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + }; + }; + + panel: panel { + pinctrl-names = "default"; + pinctrl-0 = <&lvds_panel_pins>; + enable-gpios = <&main_gpio0 36 GPIO_ACTIVE_HIGH>; + power-supply = <®_lvds_pwr>; + /* Completed and enabled by display overlays */ + status = "disabled"; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_fan_pins>; + fan-supply = <®_pwm_fan>; + #cooling-cells = <2>; + /* typical 25 kHz -> 40.000 nsec */ + pwms = <&epwm0 1 40000 PWM_POLARITY_INVERTED>; + cooling-levels = <0 32 64 128 196 240>; + pulses-per-revolution = <2>; + interrupt-parent = <&main_gpio1>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + /* + * 4-pin connector for optional fan - disabled by default, as + * PWM period may need to be adjusted for the used fan + */ + status = "disabled"; + }; + + wifi_pwrseq: pwrseq-wifi { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc2_pwrseq_pins>; + reset-gpios = <&main_gpio0 44 GPIO_ACTIVE_HIGH>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_MBA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3v3_sd: regulator-3v3-sd { + /* TPS22963CYZTP */ + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <®_3v3_sd_pins>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <®_3v3>; + gpio = <&main_gpio1 8 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + reg_lvds_pwr: regulator-lvds-pwr { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <®_lvds_pwr_pins>; + regulator-name = "LVDS0_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + vin-supply = <®_3v3>; + gpio = <&main_gpio0 61 GPIO_ACTIVE_HIGH>; + }; + + reg_pwm_fan: regulator-pwm-fan { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <®_pwm_fan_pins>; + regulator-name = "FAN_PWR"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&main_gpio0 62 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "tqm-tlv320aic32"; + simple-audio-card,widgets = + "Line Out", "Line Out", + "Line In", "Line In", + "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "Line Out", "LOL", + "Line Out", "LOR", + "IN1_L", "Line In", + "IN1_R", "Line In", + "IN3_L", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic32x4>; + clocks = <&audio_refclk0>; + }; + }; +}; + +&audio_refclk0 { + /* Set parent to POSTDIV1_16FFT_MAIN_1_HSDIVOUT6, for 96MHz clock output */ + assigned-clock-parents = <&k3_clks 157 7>; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins>, <&main_rgmii2_pins>; + status = "okay"; +}; + +&cpsw_port1 { + phy-mode = "rgmii-id"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + phy-mode = "rgmii-id"; + phy-handle = <&cpsw3g_phy3>; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins>; + status = "okay"; + + cpsw3g_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + reset-gpios = <&main_gpio1 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,fifo-depth = ; + ti,clk-output-sel = ; + }; + + cpsw3g_phy3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x3>; + reset-gpios = <&main_gpio1 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,fifo-depth = ; + ti,clk-output-sel = ; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; +}; + +&epwm0 { + status = "okay"; +}; + +&epwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio0_pins>, <&main_gpio0_pr0_pins>; + gpio-line-names = + "", "", "", "", /* 0-3 */ + "", "", "", "", /* 4-7 */ + "", "", "", "", /* 8-11 */ + "ADC_SYNC", "ADC_RST#", "ADC_DATA_RDY", "", /* 12-15 */ + "", "", "", "", /* 16-19 */ + "", "", "", "", /* 20-23 */ + "", "", "", "", /* 24-27 */ + "", "", "", "", /* 28-31 */ + "", "", "", "", /* 32-35 */ + "", "", "", "BG95_PWRKEY", /* 36-39 */ + "", "", "", "BG95_RESET", /* 40-43 */ + "", "", "", "", /* 44-47 */ + "", "", "", "", /* 48-51 */ + "", "", "", "", /* 52-55 */ + "", "", "", "", /* 56-59 */ + "", "", "", "", /* 60-63 */ + "", "", "", "", /* 64-67 */ + "", "", "", "", /* 68-71 */ + "ADC_INT"; /* 72- */ + bootph-all; +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_pins>, <&main_gpio1_pr0_pins>; + bootph-all; + + /* No overcurrent handling in USB host driver - pin is hogged for now */ + line7-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + line-name = "USB0_VBUS_OC#"; + input; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins>; + clock-frequency = <400000>; + status = "okay"; + + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + pinctrl-names = "default"; + pinctrl-0 = <&audio_codec_pins>; + #sound-dai-cells = <0>; + clock-names = "mclk"; + clocks = <&audio_refclk0>; + reset-gpios = <&main_gpio0 33 GPIO_ACTIVE_LOW>; + iov-supply = <®_1v8>; + ldoin-supply = <®_3v3>; + }; +}; + +&main_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_spi0_pins>; + ti,pindir-d0-out-d1-in; + status = "okay"; + + /* adc@0: NXP NAFE13388 */ +}; + +&main0_thermal { + trips { + main0_active0: trip-active0 { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + + main0_active1: trip-active1 { + temperature = <48000>; + hysteresis = <3000>; + type = "active"; + }; + + main0_active2: trip-active2 { + temperature = <60000>; + hysteresis = <10000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&main0_active0>; + cooling-device = <&fan0 1 1>; + }; + + map2 { + trip = <&main0_active1>; + cooling-device = <&fan0 2 2>; + }; + + map3 { + trip = <&main0_active2>; + cooling-device = <&fan0 3 3>; + }; + }; +}; + +&main1_thermal { + trips { + main1_active0: trip-active0 { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + + main1_active1: trip-active1 { + temperature = <48000>; + hysteresis = <3000>; + type = "active"; + }; + + main1_active2: trip-active2 { + temperature = <60000>; + hysteresis = <10000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&main1_active0>; + cooling-device = <&fan0 1 1>; + }; + + map2 { + trip = <&main1_active1>; + cooling-device = <&fan0 2 2>; + }; + + map3 { + trip = <&main1_active2>; + cooling-device = <&fan0 3 3>; + }; + }; +}; + +/* Main console */ +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins>; + bootph-all; + status = "okay"; +}; + +/* + * IOT module - GNSS UART + * + * Board configuration must not enable UART trace output for TIFS firmware + */ +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins>; + /* IOT module uses USB by default, UART can be enabled as fallback */ + status = "disabled"; +}; + +/* Bluetooth module */ +&main_uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart2_pins>; + /* Bluetooth module uses SDIO by default, UART can be enabled as fallback */ + status = "disabled"; +}; + +/* IOT module - main UART */ +&main_uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart5_pins>; + /* IOT module uses USB by default, UART can be enabled as fallback */ + status = "disabled"; +}; + +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp1_pins>; + #sound-dai-cells = <0>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <0>; + rx-num-evt = <0>; + status = "okay"; +}; + +&mcu_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_gpio0_pins>; + gpio-line-names = + "EN_DIG_OUT_1", "EN_DIG_OUT_2", "STATUS_OUT_1", "STATUS_OUT_2", /* 0-3 */ + "EN_DIG_OUT_3", "", "", "V_VPP_EN", /* 4-7 */ + "", "", "", "EN_DIG_OUT_4", /* 8-11 */ + "STATUS_OUT_3", "", "", "", /* 12-15 */ + "", "STATUS_OUT_4", "DIG_IN_1", "DIG_IN_2", /* 16-19 */ + "DIG_IN_3", "", "", "DIG_IN_4"; /* 20-23 */ + bootph-all; +}; + +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins>; + status = "okay"; +}; + +&mcu_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins>; + status = "okay"; +}; + +&mcu_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins>; + rs485-rts-active-low; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +®_sd { + pinctrl-names = "default"; + pinctrl-0 = <®_sd_pins>; + gpios = <&main_gpio0 31 GPIO_ACTIVE_LOW>; + bootph-all; + status = "okay"; +}; + +&sdhci1 { + /* SD-card */ + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins>; + vmmc-supply = <®_3v3_sd>; + vqmmc-supply = <®_sd>; + bus-width = <4>; + disable-wp; + no-mmc; + no-sdio; + bootph-all; + ti,driver-strength-ohm = <50>; + status = "okay"; +}; + +&sdhci2 { + /* WLAN */ + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc2_pins>; + mmc-pwrseq = <&wifi_pwrseq>; + keep-power-in-suspend; + cap-power-off-card; + bus-width = <4>; + non-removable; + no-mmc; + no-sd; + ti,driver-strength-ohm = <50>; + ti,fails-without-test-cd; + status = "okay"; +}; + +&usbss0 { + bootph-all; + ti,vbus-divider; + status = "okay"; +}; + +&usbss1 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usb0_pins>; + dr_mode = "otg"; + usb-role-switch; + bootph-all; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + id-gpios = <&main_gpio0 71 GPIO_ACTIVE_HIGH>; + type = "micro"; + }; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_hub_pins>; + #address-cells = <1>; + #size-cells = <0>; + dr_mode = "host"; + + usb1_hub_2_0: hub@1 { + compatible = "usb424,2514"; + reg = <1>; + reset-gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>; + vdd-supply = <®_3v3>; + vdda-supply = <®_3v3>; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; + +&main_pmx0 { + audio_codec_pins: audio-codec-pins { + pinctrl-single,pins = < + /* (L24) GPMC0_OEn_REn.GPIO0_33 */ + AM62X_IOPAD(0x088, PIN_OUTPUT, 7) + /* (A15) UART0_CTSn.AUDIO_EXT_REFCLK0 */ + AM62X_IOPAD(0x1d0, PIN_OUTPUT, 5) + >; + }; + + backlight_pins: backlight-pins { + pinctrl-single,pins = < + /* (V25) GPMC0_WAIT1.GPIO0_38 */ + AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) + /* (E18) MCASP0_AXR0.EHRPWM1_B */ + AM62X_IOPAD(0x01a0, PIN_OUTPUT, 6) + >; + }; + + dss_pins: dss-pins { + pinctrl-single,pins = < + /* (AA5) OLDI0_A0N */ + AM62X_IOPAD(0x0260, PIN_OUTPUT, 0) + /* (Y6) OLDI0_A0P */ + AM62X_IOPAD(0x025c, PIN_OUTPUT, 0) + /* (AD3) OLDI0_A1N */ + AM62X_IOPAD(0x0268, PIN_OUTPUT, 0) + /* (AB4) OLDI0_A1P */ + AM62X_IOPAD(0x0264, PIN_OUTPUT, 0) + /* (Y8) OLDI0_A2N */ + AM62X_IOPAD(0x0270, PIN_OUTPUT, 0) + /* (AA8) OLDI0_A2P */ + AM62X_IOPAD(0x026c, PIN_OUTPUT, 0) + /* (AB6) OLDI0_A3N */ + AM62X_IOPAD(0x0278, PIN_OUTPUT, 0) + /* (AA7) OLDI0_A3P */ + AM62X_IOPAD(0x0274, PIN_OUTPUT, 0) + /* (AC6) OLDI0_A4N */ + AM62X_IOPAD(0x0280, PIN_OUTPUT, 0) + /* (AC5) OLDI0_A4P */ + AM62X_IOPAD(0x027c, PIN_OUTPUT, 0) + /* (AE5) OLDI0_A5N */ + AM62X_IOPAD(0x0288, PIN_OUTPUT, 0) + /* (AD6) OLDI0_A5P */ + AM62X_IOPAD(0x0284, PIN_OUTPUT, 0) + /* (AE6) OLDI0_A6N */ + AM62X_IOPAD(0x0290, PIN_OUTPUT, 0) + /* (AD7) OLDI0_A6P */ + AM62X_IOPAD(0x028c, PIN_OUTPUT, 0) + /* (AD8) OLDI0_A7N */ + AM62X_IOPAD(0x0298, PIN_OUTPUT, 0) + /* (AE7) OLDI0_A7P */ + AM62X_IOPAD(0x0294, PIN_OUTPUT, 0) + /* (AD4) OLDI0_CLK0N */ + AM62X_IOPAD(0x02a0, PIN_OUTPUT, 0) + /* (AE3) OLDI0_CLK0P */ + AM62X_IOPAD(0x029c, PIN_OUTPUT, 0) + /* (AE4) OLDI0_CLK1N */ + AM62X_IOPAD(0x02a8, PIN_OUTPUT, 0) + /* (AD5) OLDI0_CLK1P */ + AM62X_IOPAD(0x02a4, PIN_OUTPUT, 0) + >; + }; + + csi_clk_pins: csi-clk-pins { + pinctrl-single,pins = < + /* (B18) MCASP0_AXR1.EHRPWM1_A */ + AM62X_IOPAD(0x019c, PIN_OUTPUT, 6) + >; + }; + + gpio_key_pins: gpio-key-pins { + pinctrl-single,pins = < + /* (M22) GPMC0_DIR.GPIO0_40 */ + AM62X_IOPAD(0x0a4, PIN_INPUT, 7) + >; + }; + + gpio_led_pins: gpio-led-pins { + pinctrl-single,pins = < + /* (M21) GPMC0_CSn0.GPIO0_41 */ + AM62X_IOPAD(0x0a8, PIN_OUTPUT, 7) + /* (L21) GPMC0_CSn1.GPIO0_42 */ + AM62X_IOPAD(0x0ac, PIN_OUTPUT, 7) + >; + }; + + lvds_panel_pins: lvds-panel-pins { + pinctrl-single,pins = < + /* (N20) GPMC0_BE1n.GPIO0_36 - LVDS0_RESET# */ + AM62X_IOPAD(0x0094, PIN_OUTPUT, 7) + >; + }; + + main_gpio0_pins: main-gpio0-pins { + pinctrl-single,pins = < + /* Control GPIOs for IOT Module */ + /* (K25) GPMC0_WPn.GPIO0_39 - BG95_PWRKEY */ + AM62X_IOPAD(0x0a0, PIN_OUTPUT, 7) + /* (K22) GPMC0_CSn2.GPIO0_43 - BG95_RESET */ + AM62X_IOPAD(0x0b0, PIN_OUTPUT, 7) + >; + }; + + main_gpio0_pr0_pins: main-gpio0-pr0-pins { + pinctrl-single,pins = < + /* (N24) GPMC0_AD2.GPIO0_17 */ + AM62X_IOPAD(0x0044, PIN_INPUT, 7) + /* (N25) GPMC0_AD3.GPIO0_18 */ + AM62X_IOPAD(0x0048, PIN_INPUT, 7) + /* (P24) GPMC0_AD4.GPIO0_19 */ + AM62X_IOPAD(0x004c, PIN_INPUT, 7) + /* (P22) GPMC0_AD5.GPIO0_20 */ + AM62X_IOPAD(0x0050, PIN_INPUT, 7) + /* (W25) VOUT0_DATA2.GPIO0_47 */ + AM62X_IOPAD(0x00c0, PIN_INPUT, 7) + /* (W24) VOUT0_DATA3.GPIO0_48 */ + AM62X_IOPAD(0x00c4, PIN_INPUT, 7) + /* (Y25) VOUT0_DATA4.GPIO0_49 */ + AM62X_IOPAD(0x00c8, PIN_INPUT, 7) + /* (Y24) VOUT0_DATA5.GPIO0_50 */ + AM62X_IOPAD(0x00cc, PIN_INPUT, 7) + >; + }; + + main_gpio1_pins: main-gpio1-pins { + pinctrl-single,pins = < + /* (B19) MCASP0_AXR3.GPIO1_7 - USB0_VBUS_OC# */ + AM62X_IOPAD(0x0194, PIN_INPUT, 7) + >; + }; + + main_gpio1_pr0_pins: main-gpio1-pr0-pins { + pinctrl-single,pins = < + /* (C15) MCAN0_TX.GPIO1_24 */ + AM62X_IOPAD(0x01d8, PIN_INPUT, 7) + /* (E15) MCAN0_RX.GPIO1_25 */ + AM62X_IOPAD(0x01dc, PIN_INPUT, 7) + >; + }; + + main_i2c1_pins: main-i2c1-pins { + pinctrl-single,pins = < + /* (B17) I2C1_SCL */ + AM62X_IOPAD(0x1e8, PIN_INPUT, 0) + /* (A17) I2C1_SDA */ + AM62X_IOPAD(0x1ec, PIN_INPUT, 0) + >; + }; + + main_mcasp1_pins: main-mcasp1-pins { + pinctrl-single,pins = < + /* (M24) GPMC0_BE0N_CLE.MCASP1_ACLKX */ + AM62X_IOPAD(0x090, PIN_INPUT, 2) + /* (U23) GPMC0_WAIT0.MCASP1_AFSX */ + AM62X_IOPAD(0x098, PIN_INPUT, 2) + /* (L25) GPMC0_WEN.MCASP1_AXR0 */ + AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) + /* (L23) GPMC0_ADVN_ALE.MCASP1_AXR2 */ + AM62X_IOPAD(0x084, PIN_INPUT, 2) + >; + }; + + main_mmc1_pins: main-mmc1-pins { + pinctrl-single,pins = < + /* (A21) MMC1_CMD */ + AM62X_IOPAD(0x23c, PIN_INPUT, 0) + /* (B22) MMC1_CLK */ + AM62X_IOPAD(0x234, PIN_INPUT, 0) + /* (A22) MMC1_DAT0 */ + AM62X_IOPAD(0x230, PIN_INPUT, 0) + /* (B21) MMC1_DAT1 */ + AM62X_IOPAD(0x22c, PIN_INPUT, 0) + /* (C21) MMC1_DAT2 */ + AM62X_IOPAD(0x228, PIN_INPUT, 0) + /* (D22) MMC1_DAT3 */ + AM62X_IOPAD(0x224, PIN_INPUT, 0) + /* (D17) MMC1_SDCD */ + AM62X_IOPAD(0x240, PIN_INPUT, 0) + >; + bootph-all; + }; + + main_mmc2_pins: main-mmc2-pins { + pinctrl-single,pins = < + /* (C24) MMC2_CMD */ + AM62X_IOPAD(0x120, PIN_INPUT, 0) + /* (D25) MMC2_CLK */ + AM62X_IOPAD(0x118, PIN_INPUT, 0) + /* (B24) MMC2_DAT0 */ + AM62X_IOPAD(0x114, PIN_INPUT, 0) + /* (C25) MMC2_DAT1 */ + AM62X_IOPAD(0x110, PIN_INPUT, 0) + /* (E23) MMC2_DAT2 */ + AM62X_IOPAD(0x10c, PIN_INPUT, 0) + /* (D24) MMC2_DAT3 */ + AM62X_IOPAD(0x108, PIN_INPUT, 0) + /* (#N/A) MMC2_CLKB */ + AM62X_IOPAD(0x11c, PIN_INPUT, 0) + >; + }; + + main_mmc2_pwrseq_pins: main-mmc2-pwrseq-pins { + pinctrl-single,pins = < + /* (K24) GPMC0_CSn3.GPIO0_44 - WIFI-BT_EN */ + AM62X_IOPAD(0x00b4, PIN_OUTPUT, 7) + >; + }; + + main_mdio1_pins: main-mdio1-pins { + pinctrl-single,pins = < + /* (B20) MCASP0_ACLKX.GPIO1_11 - RESET_RGMII1# */ + AM62X_IOPAD(0x1a4, PIN_OUTPUT, 7) + /* (D20) MCASP0_AFSX.GPIO1_12 - RESET_RGMII2# */ + AM62X_IOPAD(0x1a8, PIN_OUTPUT, 7) + + /* (AD24) MDIO0_MDC */ + AM62X_IOPAD(0x160, PIN_OUTPUT, 0) + /* (AB22) MDIO0_MDIO */ + AM62X_IOPAD(0x15c, PIN_INPUT, 0) + >; + }; + + main_rgmii1_pins: main-rgmii1-pins { + pinctrl-single,pins = < + /* (AB17) RGMII1_RD0 */ + AM62X_IOPAD(0x14c, PIN_INPUT, 0) + /* (AC17) RGMII1_RD1 */ + AM62X_IOPAD(0x150, PIN_INPUT, 0) + /* (AB16) RGMII1_RD2 */ + AM62X_IOPAD(0x154, PIN_INPUT, 0) + /* (AA15) RGMII1_RD3 */ + AM62X_IOPAD(0x158, PIN_INPUT, 0) + /* (AD17) RGMII1_RXC */ + AM62X_IOPAD(0x148, PIN_INPUT, 0) + /* (AE17) RGMII1_RX_CTL */ + AM62X_IOPAD(0x144, PIN_INPUT, 0) + /* (AE20) RGMII1_TD0 */ + AM62X_IOPAD(0x134, PIN_OUTPUT, 0) + /* (AD20) RGMII1_TD1 */ + AM62X_IOPAD(0x138, PIN_OUTPUT, 0) + /* (AE18) RGMII1_TD2 */ + AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) + /* (AD18) RGMII1_TD3 */ + AM62X_IOPAD(0x140, PIN_OUTPUT, 0) + /* (AE19) RGMII1_TXC */ + AM62X_IOPAD(0x130, PIN_OUTPUT, 0) + /* (AD19) RGMII1_TX_CTL */ + AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) + >; + }; + + main_rgmii2_pins: main-rgmii2-pins { + pinctrl-single,pins = < + /* (AE23) RGMII2_RD0 */ + AM62X_IOPAD(0x184, PIN_INPUT, 0) + /* (AB20) RGMII2_RD1 */ + AM62X_IOPAD(0x188, PIN_INPUT, 0) + /* (AC21) RGMII2_RD2 */ + AM62X_IOPAD(0x18c, PIN_INPUT, 0) + /* (AE22) RGMII2_RD3 */ + AM62X_IOPAD(0x190, PIN_INPUT, 0) + /* (AD23) RGMII2_RXC */ + AM62X_IOPAD(0x180, PIN_INPUT, 0) + /* (AD22) RGMII2_RX_CTL */ + AM62X_IOPAD(0x17c, PIN_INPUT, 0) + /* (Y18) RGMII2_TD0 */ + AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) + /* (AA18) RGMII2_TD1 */ + AM62X_IOPAD(0x170, PIN_OUTPUT, 0) + /* (AD21) RGMII2_TD2 */ + AM62X_IOPAD(0x174, PIN_OUTPUT, 0) + /* (AC20) RGMII2_TD3 */ + AM62X_IOPAD(0x178, PIN_OUTPUT, 0) + /* (AE21) RGMII2_TXC */ + AM62X_IOPAD(0x168, PIN_OUTPUT, 0) + /* (AA19) RGMII2_TX_CTL */ + AM62X_IOPAD(0x164, PIN_OUTPUT, 0) + >; + }; + + main_spi0_pins: main-spi0-pins { + pinctrl-single,pins = < + /* (A14) SPI0_CLK */ + AM62X_IOPAD(0x1bc, PIN_OUTPUT, 0) + /* (A13) SPI0_CS0 */ + AM62X_IOPAD(0x1b4, PIN_OUTPUT, 0) + /* (B13) SPI0_D0 */ + AM62X_IOPAD(0x1c0, PIN_OUTPUT, 0) + /* (B14) SPI0_D1 */ + AM62X_IOPAD(0x1c4, PIN_INPUT, 0) + >; + }; + + main_spi0_adc_pins: main-spi0-adc-pins { + pinctrl-single,pins = < + /* (G21) OSPI0_CSn1.GPIO0_12 - ADC_SYNC */ + AM62X_IOPAD(0x030, PIN_INPUT, 7) + /* (H21) OSPI0_CSn2.GPIO0_13 - ADC_RST# */ + AM62X_IOPAD(0x034, PIN_OUTPUT, 7) + /* (E24) OSPI0_CSn3.GPIO0_14 - ADC_DATA_RDY */ + AM62X_IOPAD(0x038, PIN_INPUT, 7) + /* (B23) MMC2_SDWP.GPIO0_72 - ADC_INT# */ + AM62X_IOPAD(0x128, PIN_INPUT, 7) + >; + }; + + main_uart0_pins: main-uart0-pins { + pinctrl-single,pins = < + /* (D14) UART0_RXD */ + AM62X_IOPAD(0x1c8, PIN_INPUT, 0) + /* (E14) UART0_TXD */ + AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) + >; + bootph-all; + }; + + main_uart1_pins: main-uart1-pins { + pinctrl-single,pins = < + /* (E19) MCASP0_AFSR.UART1_RXD */ + AM62X_IOPAD(0x1ac, PIN_INPUT, 2) + /* (A20) MCASP0_ACLKR.UART1_TXD */ + AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) + >; + }; + + main_uart2_pins: main-uart2-pins { + pinctrl-single,pins = < + /* (U22) VOUT0_DATA0.UART2_RXD */ + AM62X_IOPAD(0x0b8, PIN_INPUT, 4) + /* (V24) VOUT0_DATA1.UART2_TXD */ + AM62X_IOPAD(0x0bc, PIN_OUTPUT, 4) + /* (AC24) VOUT0_PCLK.UART2_CTS# */ + AM62X_IOPAD(0x104, PIN_INPUT, 4) + /* (AC25) VOUT0_VSYNC.UART2_RTS# */ + AM62X_IOPAD(0x100, PIN_OUTPUT, 4) + >; + }; + + main_uart5_pins: main-uart5-pins { + pinctrl-single,pins = < + /* (Y23) VOUT0_DATA6.UART5_RXD */ + AM62X_IOPAD(0x0d0, PIN_INPUT, 4) + /* (AA25) VOUT0_DATA7.UART5_TXD */ + AM62X_IOPAD(0x0d4, PIN_OUTPUT, 4) + >; + }; + + main_usb0_pins: main-usb0-pins { + pinctrl-single,pins = < + /* (C20) USB0_DRVVBUS */ + AM62X_IOPAD(0x254, PIN_OUTPUT, 0) + /* (A23) MMC2_SDCD.GPIO0_71 */ + AM62X_IOPAD(0x124, PIN_INPUT, 7) + >; + }; + + main_usb1_hub_pins: main-usb1-hub-pins { + pinctrl-single,pins = < + /* (B15) UART0_RTSn.GPIO1_23 - USB_HUB_RESET */ + AM62X_IOPAD(0x01d4, PIN_OUTPUT, 7) + >; + }; + + pwm_fan_pins: pwm-fan-pins { + pinctrl-single,pins = < + /* (C13) SPI0_CS1.EHRPWM0_B - FAN_PWM */ + AM62X_IOPAD(0x01b8, PIN_OUTPUT, 2) + /* (A18) EXT_REFCLK1.GPIO1_30 - FAN_RPM */ + AM62X_IOPAD(0x01f0, PIN_INPUT, 7) + >; + }; + + reg_3v3_sd_pins: reg-3v3-sd-pins { + pinctrl-single,pins = < + /* (A19) MCASP0_AXR2.GPIO1_8 */ + AM62X_IOPAD(0x198, PIN_OUTPUT, 7) + >; + bootph-all; + }; + + reg_lvds_pwr_pins: reg-lvds-pwr-pins { + pinctrl-single,pins = < + /* (AB24) VOUT0_HSYNC.GPIO0_61 */ + AM62X_IOPAD(0x00f8, PIN_OUTPUT, 7) + >; + }; + + reg_pwm_fan_pins: reg-pwm-fan-pins { + pinctrl-single,pins = < + /* (Y20) VOUT0_DE.GPIO0_62 */ + AM62X_IOPAD(0x00fc, PIN_OUTPUT, 7) + >; + }; + + reg_sd_pins: reg-sd-pins { + pinctrl-single,pins = < + /* (P25) GPMC0_CLK.GPIO0_31 */ + AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) + >; + bootph-all; + }; +}; + +&mcu_pmx0 { + mcu_gpio0_pins: mcu-gpio0-pins { + pinctrl-single,pins = < + /* (E8) MCU_SPI0_CS0.MCU_GPIO0_0 - EN_DIG_OUT1 */ + AM62X_MCU_IOPAD(0x000, PIN_OUTPUT, 7) + /* (B8) MCU_SPI0_CS1.MCU_GPIO0_1 - EN_DIG_OUT2 */ + AM62X_MCU_IOPAD(0x004, PIN_OUTPUT, 7) + /* (A7) MCU_SPI0_CLK.MCU_GPIO0_2 - STATUS_OUT1 */ + AM62X_MCU_IOPAD(0x008, PIN_INPUT, 7) + /* (D9) MCU_SPI0_D0.MCU_GPIO0_3 - STATUS_OUT2 */ + AM62X_MCU_IOPAD(0x00c, PIN_INPUT, 7) + /* (C9) MCU_SPI0_D1.MCU_GPIO0_4 - EN_DIG_OUT3 */ + AM62X_MCU_IOPAD(0x010, PIN_OUTPUT, 7) + /* (C6) WKUP_UART0_CTSn.MCU_GPIO0_11 - EN_DIG_OUT4 */ + AM62X_MCU_IOPAD(0x02c, PIN_OUTPUT, 7) + /* (A4) WKUP_UART0_RTSn.MCU_GPIO0_12 - STATUS_OUT3 */ + AM62X_MCU_IOPAD(0x030, PIN_INPUT, 7) + /* (A8) MCU_I2C0_SCL.MCU_GPIO0_17 - STATUS_OUT4 */ + AM62X_MCU_IOPAD(0x044, PIN_INPUT, 7) + /* (D10) MCU_I2C0_SDA.MCU_GPIO0_18 - DIG_IN_1 */ + AM62X_MCU_IOPAD(0x048, PIN_INPUT, 7) + /* (B9) WKUP_I2C0_SCL.MCU_GPIO0_19 - DIG_IN_2 */ + AM62X_MCU_IOPAD(0x04c, PIN_INPUT, 7) + /* (A9) WKUP_I2C0_SDA.MCU_GPIO0_20 - DIG_IN_3 */ + AM62X_MCU_IOPAD(0x050, PIN_INPUT, 7) + /* (A12) WKUP_CLKOUT0.MCU_GPIO0_23 - DIG_IN_4 */ + AM62X_MCU_IOPAD(0x084, PIN_INPUT, 7) + /* (A6) MCU_UART0_CTSn.MCU_GPIO0_7 - V_VPP_EN */ + AM62X_MCU_IOPAD(0x01c, PIN_OUTPUT, 7) + >; + }; + mcu_mcan0_pins: mcu-mcan0-pins { + pinctrl-single,pins = < + /* (B3) MCU_MCAN0_RX */ + AM62X_MCU_IOPAD(0x038, PIN_INPUT, 0) + /* (D6) MCU_MCAN0_TX */ + AM62X_MCU_IOPAD(0x034, PIN_OUTPUT, 0) + >; + }; + + mcu_mcan1_pins: mcu-mcan1-pins { + pinctrl-single,pins = < + /* (D4) MCU_MCAN1_RX */ + AM62X_MCU_IOPAD(0x040, PIN_INPUT, 0) + /* (E5) MCU_MCAN1_TX */ + AM62X_MCU_IOPAD(0x03c, PIN_OUTPUT, 0) + >; + }; + + mcu_uart0_pins: mcu-uart0-pins { + pinctrl-single,pins = < + /* (B5) MCU_UART0_RXD */ + AM62X_MCU_IOPAD(0x014, PIN_INPUT, 0) + /* (A5) MCU_UART0_TXD */ + AM62X_MCU_IOPAD(0x018, PIN_OUTPUT, 0) + /* (B6) MCU_UART0_RTS# */ + AM62X_MCU_IOPAD(0x020, PIN_OUTPUT, 0) + >; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi b/arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi new file mode 100644 index 0000000..7228867 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (c) 2023-2026 TQ-Systems GmbH , D-82229 Seefeld, Germany. + * Author: Nora Schiffer + */ + +#include "k3-am625.dtsi" + +/ { + aliases { + i2c0 = &main_i2c0; + mmc0 = &sdhci0; + spi0 = &ospi0; + }; + + memory@80000000 { + device_type = "memory"; + /* 1G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x40000000>; + bootph-pre-ram; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@9c700000 { + compatible = "ramoops"; + reg = <0x00 0x9c700000 0x00 0x00100000>; + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x00>; + pmsg-size = <0x8000>; + }; + + /* global cma region */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00 0x8000000>; + linux,cma-default; + }; + + rtos_ipc_memory_region: memory@9c800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c800000 0x00 0x00300000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: memory@9da00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9da00000 0x00 0x100000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0xc00000>; + no-map; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_sd: regulator-sd { + /* Output of TPS6521902RSM */ + compatible = "regulator-gpio"; + regulator-name = "V_VDDSHV5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <®_ldo1>; + states = <1800000 0x0>, + <3300000 0x1>; + /* Controlling GPIO set by base board */ + status = "disabled"; + }; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins>; + clock-frequency = <400000>; + bootph-pre-ram; + status = "okay"; + + tps65219: pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; + interrupt-parent = <&gic500>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + buck1-supply = <®_3v3>; + buck2-supply = <®_3v3>; + buck3-supply = <®_3v3>; + ldo1-supply = <®_3v3>; + ldo2-supply = <®_buck2>; + ldo3-supply = <®_3v3>; + ldo4-supply = <®_3v3>; + system-power-controller; + ti,power-button; + + regulators { + reg_buck1: buck1 { + regulator-name = "V_VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck2: buck2 { + regulator-name = "V_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck3: buck3 { + regulator-name = "V_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_ldo1: ldo1 { + /* Actual voltage of LDO1 is controlled by GPIO, see reg_sd */ + regulator-name = "V_VDDSHV5_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + reg_ldo2: ldo2 { + regulator-name = "V_0V85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_ldo3: ldo3 { + regulator-name = "V_1V8A"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_ldo4: ldo4 { + /* Unused */ + regulator-name = "V_VLDO4"; + regulator-boot-on; + }; + }; + }; + + tmp1075: temperature-sensor@4a { + compatible = "ti,tmp1075"; + reg = <0x4a>; + vs-supply = <®_buck2>; + }; + + eeprom0: eeprom@50 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x50>; + vcc-supply = <®_buck2>; + pagesize = <16>; + read-only; + bootph-pre-ram; + }; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <12500>; + }; + + eeprom1: eeprom@54 { + compatible = "st,24c64", "atmel,24c64"; + reg = <0x54>; + vcc-supply = <®_buck2>; + pagesize = <32>; + }; +}; + +&a53_opp_table { + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + opp-suspend; + clock-latency-ns = <6000000>; + /* + * Enabled by bootloader if supported. The PMIC configuration + * will be adjusted accordingly, as a higher core voltage is + * required for 1400MHz operation. + */ + status = "disabled"; + }; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins>; + bootph-all; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + vcc-supply = <®_buck2>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <84000000>; + bootph-all; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* Filled by bootloader */ + }; + }; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins>; + non-removable; + disable-wp; + no-sd; + no-sdio; + bootph-all; + ti,driver-strength-ohm = <50>; + status = "okay"; +}; + +&wkup_rtc0 { + /* + * Erratum i2327: We can't guarantee that the TQMa62xx will boot fast + * enough for U-Boot to apply the workaround within one second after + * power-on. Keep the RTC disabled to avoid RTC interrupt issues. + * + * The external RTC of the TQMa62xx should be used instead. + * + * If needed, the RTC can be enabled in a baseboard DTS, as long as + * boot is fast enough on all relevant boot media. + */ + status = "disabled"; +}; + +&main_pmx0 { + main_i2c0_pins: main-i2c0-pins { + pinctrl-single,pins = < + /* (B16) I2C0_SCL */ + AM62X_IOPAD(0x1e0, PIN_INPUT, 0) + /* (A16) I2C0_SDA */ + AM62X_IOPAD(0x1e4, PIN_INPUT, 0) + >; + bootph-pre-ram; + }; + + main_mmc0_pins: main-mmc0-pins { + pinctrl-single,pins = < + /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x220, PIN_INPUT, 0) + /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) + /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) + /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) + /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) + /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) + /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) + /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) + /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) + /* (AC2) MMC0_DAT7 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) + >; + bootph-all; + }; + + ospi0_pins: ospi0-pins { + pinctrl-single,pins = < + /* (H24) OSPI0_CLK */ + AM62X_IOPAD(0x000, PIN_OUTPUT, 0) + /* (F23) OSPI0_CSn0 */ + AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) + /* (E25) OSPI0_D0 */ + AM62X_IOPAD(0x00c, PIN_INPUT, 0) + /* (G24) OSPI0_D1 */ + AM62X_IOPAD(0x010, PIN_INPUT, 0) + /* (F25) OSPI0_D2 */ + AM62X_IOPAD(0x014, PIN_INPUT, 0) + /* (F24) OSPI0_D3 */ + AM62X_IOPAD(0x018, PIN_INPUT, 0) + /* (J23) OSPI0_D4 */ + AM62X_IOPAD(0x01c, PIN_INPUT, 0) + /* (J25) OSPI0_D5 */ + AM62X_IOPAD(0x020, PIN_INPUT, 0) + /* (H25) OSPI0_D6 */ + AM62X_IOPAD(0x024, PIN_INPUT, 0) + /* (J22) OSPI0_D7 */ + AM62X_IOPAD(0x028, PIN_INPUT, 0) + /* (J24) OSPI0_DQS */ + AM62X_IOPAD(0x008, PIN_INPUT, 0) + /* (G25) OSPI0_LBCLKO */ + AM62X_IOPAD(0x004, PIN_INPUT, 0) + >; + }; + + pmic_irq_pins: pmic-irq-pins { + pinctrl-single,pins = < + /* (D16) EXTINTn */ + AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) + >; + }; +}; + +#include "k3-am62-ti-ipc-firmware.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-can.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-can.dtso new file mode 100644 index 0000000..7ebf60d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-can.dtso @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Enable AM62 MCU_MCAN1 exposed on Toradex Verdin Development Board with + * Verdin AM62 Mezzanine expansion board on CAN Header (J13), + * Pin 3 (CAN1_CONN_N) and Pin 4 (CAN1_CONN_P). + */ + +/dts-v1/; +/plugin/; + +#include "k3-pinctrl.h" + +&mcu_pmx0 { + pinctrl_mcu_mcan1: mcu-mcan1-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0040, PIN_INPUT, 0) /* (D4) MCU_MCAN1_RX (SODIMM 116) */ + AM62X_MCU_IOPAD(0x003c, PIN_OUTPUT, 0) /* (E5) MCU_MCAN1_TX (SODIMM 128) */ + >; + }; +}; + +&mcu_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_mcan1>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtso new file mode 100644 index 0000000..83fc4f3 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtso @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Toradex Capacitive Touch Display 10.1" LVDS on the Verdin AM62 Mezzanine + * LVDS interface (J10), used with the Verdin Development Board. + * + * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds + * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include + +&{/} { + backlight_pwm2: backlight-pwm2 { + compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + /* Verdin GPIO_4 (SODIMM 212) - LVDS_BKL_EN */ + enable-gpios = <&mcu_gpio0 4 GPIO_ACTIVE_HIGH>; + /* Verdin PWM_2 (SODIMM 16) - LVDS_PWM */ + pwms = <&epwm0 1 6666667 PWM_POLARITY_INVERTED>; + }; + + panel-lvds-native { + compatible = "logictechno,lt170410-2whc"; + backlight = <&backlight_pwm2>; + power-supply = <®_3v3_lvds>; + + port { + panel_lvds_native_in: endpoint { + remote-endpoint = <&oldi0_out>; + }; + }; + }; + + reg_3v3_lvds: regulator-3v3-lvds { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_LVDS"; + }; +}; + +&dss { + status = "okay"; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + /* DSS VP1: internal DPI output to OLDIx */ + port@0 { + reg = <0>; + + dss0_out: endpoint { + remote-endpoint = <&oldi0_in>; + }; + }; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + /* Verdin GPIO_3 (SODIMM 210) - LVDS_TOUCH_INT# */ + interrupt-parent = <&mcu_gpio0>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + /* Verdin GPIO_2 (SODIMM 208) - LVDS_TOUCH_RST# */ + reset-gpios = <&mcu_gpio0 2 GPIO_ACTIVE_LOW>; + }; +}; + +&oldi0 { + status = "okay"; +}; + +&oldi0_port0 { + oldi0_in: endpoint { + remote-endpoint = <&dss0_out>; + }; +}; + +&oldi0_port1 { + oldi0_out: endpoint { + remote-endpoint = <&panel_lvds_native_in>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-dev-nau8822-btl.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-dev-nau8822-btl.dtso new file mode 100644 index 0000000..e4b6625 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-dev-nau8822-btl.dtso @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Enable Bridge Tied Load (BTL) speaker mode on the Verdin Development Board, + * combining the two loudspeaker outputs for higher output power. + */ + +/dts-v1/; +/plugin/; + +&nau8822_1a { + nuvoton,spk-btl; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-hdmi.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-hdmi.dtso new file mode 100644 index 0000000..a219faf --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-hdmi.dtso @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Toradex DSI to HDMI Adapter on Verdin DSI_1 + * + * https://developer.toradex.com/hardware/accessories/add-ons/dsi-hdmi-adapter + */ + +/dts-v1/; +/plugin/; + +#include + +&{/} { + hdmi-connector { + compatible = "hdmi-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3_dsi_gpio>; + ddc-i2c-bus = <&main_i2c2>; + /* Verdin PWM_3_DSI (SODIMM 19) */ + hpd-gpios = <&main_gpio1 17 GPIO_ACTIVE_HIGH>; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&dsi_hdmi_bridge_out>; + }; + }; + }; +}; + +&dsi_bridge { + status = "okay"; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_bridge_out: endpoint { + remote-endpoint = <&dsi_hdmi_bridge_in>; + }; + }; +}; + +&dss { + status = "okay"; +}; + +/* Verdin PWM_3_DSI (SODIMM 19) repurposed as HDMI HPD GPIO */ +&epwm1 { + status = "disabled"; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi@48 { + compatible = "lontium,lt8912b"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi1_bkl_en>; + /* Verdin GPIO_10_DSI (SODIMM 21) */ + reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_hdmi_bridge_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&dsi_bridge_out>; + }; + }; + + port@1 { + reg = <1>; + + dsi_hdmi_bridge_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso new file mode 100644 index 0000000..deb74ec --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Toradex DSI to LVDS Adapter on Verdin DSI_1 with Capacitive Touch Display 10.1" + * Used on Dahlia (X17) and Development Board (X48) that expose DSI_1 via an + * Samtec LSS-130 connector. + * + * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds + * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds + * https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter + * https://www.toradex.com/accessories/verdin-dsi-to-lvds-adapter + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include + +&{/} { + backlight_pwm3: backlight-pwm3 { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_2_d_out_gpio>; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + /* Verdin I2S_2_D_OUT as GPIO (SODIMM 46) */ + enable-gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + /* Verdin PWM_3_DSI (SODIMM 19) */ + pwms = <&epwm1 0 6666667 PWM_POLARITY_INVERTED>; + }; + + panel-lvds-bridge { + compatible = "logictechno,lt170410-2whc"; + backlight = <&backlight_pwm3>; + power-supply = <®_3v3_dsi>; + + port { + panel_lvds_bridge_in: endpoint { + remote-endpoint = <&dsi_lvds_bridge_out>; + }; + }; + }; + + reg_3v3_dsi: regulator-3v3-dsi { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_DSI"; + }; +}; + +&dsi_bridge { + status = "okay"; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_bridge_out: endpoint { + remote-endpoint = <&dsi_lvds_bridge_in>; + }; + }; +}; + +&dss { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2c { + compatible = "ti,sn65dsi84"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi1_bkl_en>; + /* Verdin GPIO_10_DSI (SODIMM 21) - DSI_1_BKL_EN */ + enable-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_lvds_bridge_in: endpoint { + remote-endpoint = <&dsi_bridge_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + + dsi_lvds_bridge_out: endpoint { + remote-endpoint = <&panel_lvds_bridge_in>; + }; + }; + }; + }; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi1_int>, <&pinctrl_i2s_2_bclk_gpio>; + /* Verdin GPIO_9_DSI (SODIMM 17) - TOUCH_INT# */ + interrupt-parent = <&main_gpio1>; + interrupts = <49 IRQ_TYPE_EDGE_FALLING>; + /* Verdin I2S_2_BCLK (SODIMM 42) - TOUCH_RESET# */ + reset-gpios = <&main_gpio0 35 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640-24mhz.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640-24mhz.dtso new file mode 100644 index 0000000..7089336 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640-24mhz.dtso @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Toradex CSI Camera Module 5MP OV5640 on Verdin CSI_1. + * + * https://developer.toradex.com/hardware/legacy-products/other/csi-camera-module-5mp-ov5640/ + */ + +/dts-v1/; +/plugin/; + +#include "k3-am625-verdin-ov5640.dtsi" + +&clk_ov5640_osc { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtsi b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtsi new file mode 100644 index 0000000..eb3df9d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Common device tree include for Toradex OV5640 CSI camera on Verdin CSI_1. + */ + +#include + +&{/} { + clk_ov5640_osc: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + regulator_camera: regulator-camera { + compatible = "regulator-fixed"; + /* Verdin GPIO_8_CSI (SODIMM 222) - CAM_1_CON_PWRCTRL */ + gpio = <&main_gpio0 42 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "V_CSI"; + startup-delay-us = <5000>; + }; +}; + +&csi0_port0 { + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; +}; + +&dphy0 { + status = "okay"; +}; + +&main_i2c3 { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_osc>; + clock-names = "xclk"; + AVDD-supply = <®ulator_camera>; + DOVDD-supply = <®ulator_camera>; + DVDD-supply = <®ulator_camera>; + /* Verdin GPIO_6 (SODIMM 218) - CAM_1_CON_PWRDWN */ + powerdown-gpios = <&main_gpio0 36 GPIO_ACTIVE_HIGH>; + /* Verdin GPIO_5 (SODIMM 216) - CAM_1_CON_RST */ + reset-gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ti_csi2rx0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtso new file mode 100644 index 0000000..e7f02cf --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtso @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Toradex CSI Camera Set 5MP OV5640 on Verdin CSI_1. + * + * https://developer.toradex.com/hardware/accessories/cameras/csi-camera-module-5mp-ov5640-arducam + * https://www.toradex.com/accessories/csi-camera-ov5640 + */ + +/dts-v1/; +/plugin/; + +#include "k3-am625-verdin-ov5640.dtsi" + +&clk_ov5640_osc { + clock-frequency = <27000000>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-dsi.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-dsi.dtso new file mode 100644 index 0000000..ed66fee --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-dsi.dtso @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Toradex Capacitive Touch Display 10.1" on Verdin DSI_1. + * On Dahlia (X17) and Development Board (X48), DSI_1 is exposed via a + * Samtec LSS-130 connector and requires the Toradex DSI Display Adapter + * to convert to FFC/FPC connector. + * + * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-dsi + * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-dsi + * https://developer.toradex.com/hardware/accessories/add-ons/dsi-display-adapter + * https://www.toradex.com/accessories/verdin-dsi-display-adapter + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include + +&{/} { + backlight_pwm3: backlight-pwm3 { + compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + power-supply = <®_3v3>; + /* Verdin PWM_3_DSI (SODIMM 19) - PWM_3_DSI_LVDS */ + pwms = <&epwm1 0 6666667 0>; + }; + + panel-lvds-bridge { + compatible = "riverdi,rvt101hvlnwc00", "panel-lvds"; + backlight = <&backlight_pwm3>; + data-mapping = "vesa-24"; + height-mm = <136>; + width-mm = <217>; + + panel-timing { + clock-frequency = <72400000>; + de-active = <1>; + hactive = <1280>; + hback-porch = <88 88 88>; + hfront-porch = <12 72 132>; + hsync-active = <0>; + hsync-len = <1 5 40>; + pixelclk-active = <1>; + vactive = <800>; + vback-porch = <23 23 23>; + vfront-porch = <1 15 49>; + vsync-active = <0>; + vsync-len = <1 10 20>; + }; + + port { + panel_lvds_bridge_in: endpoint { + remote-endpoint = <&dsi_lvds_bridge_out>; + }; + }; + }; +}; + +&dsi_bridge { + status = "okay"; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_bridge_out: endpoint { + remote-endpoint = <&dsi_lvds_bridge_in>; + }; + }; +}; + +&dss { + status = "okay"; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2c { + compatible = "ti,sn65dsi83"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi1_bkl_en>; + /* Verdin GPIO_10_DSI (SODIMM 21) - DSI_1_BKL_EN */ + enable-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_lvds_bridge_in: endpoint { + remote-endpoint = <&dsi_bridge_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + + dsi_lvds_bridge_out: endpoint { + remote-endpoint = <&panel_lvds_bridge_in>; + }; + }; + }; + }; + + touchscreen@41 { + compatible = "ilitek,ili2132"; + reg = <0x41>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi1_int>, <&pinctrl_i2s_2_bclk_gpio>; + /* Verdin GPIO_9_DSI (SODIMM 17) - TOUCH_INT# */ + interrupt-parent = <&main_gpio1>; + interrupts = <49 IRQ_TYPE_EDGE_RISING>; + /* Verdin I2S_2_BCLK (SODIMM 42) - TOUCH_RESET# */ + reset-gpios = <&main_gpio0 35 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-lvds.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-lvds.dtso new file mode 100644 index 0000000..f83366b --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-lvds.dtso @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Toradex Capacitive Touch Display 10.1" connected via Verdin AM62 OLDI + * on carrier boards with a Toradex standard LVDS display connector + * (e.g., Mallow). + * + * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds + * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include +#include "k3-pinctrl.h" + +&{/} { + backlight_pwm2: backlight-pwm2 { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_2_d_out_gpio>; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + /* Verdin I2S_2_D_OUT as GPIO (SODIMM 46) */ + enable-gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>; + /* Verdin PWM_2 (SODIMM 16) */ + pwms = <&epwm0 1 6666667 PWM_POLARITY_INVERTED>; + }; + + panel-lvds-native { + compatible = "logictechno,lt170410-2whc"; + backlight = <&backlight_pwm2>; + power-supply = <®_3v3_lvds>; + + port { + panel_lvds_native_in: endpoint { + remote-endpoint = <&oldi0_out>; + }; + }; + }; + + reg_3v3_lvds: regulator-3v3-lvds { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_LVDS"; + }; +}; + +&dss { + status = "okay"; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + /* DSS VP1: internal DPI output to OLDIx */ + port@0 { + reg = <0>; + + dss0_out: endpoint { + remote-endpoint = <&oldi0_in>; + }; + }; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_2_d_in_gpio>, <&pinctrl_i2s_2_sync_gpio>; + /* Verdin I2S_2_SYNC as GPIO (SODIMM 44) */ + interrupt-parent = <&main_gpio0>; + interrupts = <37 IRQ_TYPE_EDGE_FALLING>; + /* Verdin I2S_2_D_IN as GPIO (SODIMM 48) */ + reset-gpios = <&main_gpio0 33 GPIO_ACTIVE_LOW>; + }; +}; + +&main_pmx0 { + /* Mallow Touch RST */ + pinctrl_i2s_2_d_in_gpio: main-gpio0-33-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0088, PIN_INPUT, 7) /* (L24) GPMC0_OEn_REn.GPIO0_33 */ /* SODIMM 48 */ + >; + }; + + /* Mallow Touch INT# */ + pinctrl_i2s_2_sync_gpio: main-gpio0-37-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0098, PIN_INPUT, 7) /* (U23) GPMC0_WAIT0.GPIO0_37 */ /* SODIMM 44 */ + >; + }; +}; + +&oldi0 { + status = "okay"; +}; + +&oldi0_port0 { + oldi0_in: endpoint { + remote-endpoint = <&dss0_out>; + }; +}; + +&oldi0_port1 { + oldi0_out: endpoint { + remote-endpoint = <&panel_lvds_native_in>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-7inch-dsi.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-7inch-dsi.dtso new file mode 100644 index 0000000..1f44133 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-7inch-dsi.dtso @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Toradex Capacitive Touch Display 7" on Verdin DSI_1. + * On Dahlia (X17) and Development Board (X48), DSI_1 is exposed via a + * Samtec LSS-130 connector and requires the Toradex DSI Display Adapter + * to convert to FFC/FPC connector. + * + * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-7inch-dsi + * https://www.toradex.com/accessories/capacitive-touch-display-7-inch-dsi + * https://developer.toradex.com/hardware/accessories/add-ons/dsi-display-adapter + * https://www.toradex.com/accessories/verdin-dsi-display-adapter + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include + +&{/} { + backlight_pwm3: backlight-pwm3 { + compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + power-supply = <®_3v3>; + /* Verdin PWM_3_DSI (SODIMM 19) - PWM_3_DSI_LVDS */ + pwms = <&epwm1 0 6666667 0>; + }; + + panel-lvds-bridge { + compatible = "riverdi,rvt70hslnwca0", "panel-lvds"; + backlight = <&backlight_pwm3>; + data-mapping = "vesa-24"; + height-mm = <86>; + width-mm = <154>; + + panel-timing { + clock-frequency = <51200000>; + de-active = <1>; + hactive = <1024>; + hback-porch = <160 160 160>; + hfront-porch = <16 160 216>; + hsync-active = <0>; + hsync-len = <1 5 140>; + pixelclk-active = <1>; + vactive = <600>; + vback-porch = <23 23 23>; + vfront-porch = <1 12 126>; + vsync-active = <0>; + vsync-len = <1 10 20>; + }; + + port { + panel_lvds_bridge_in: endpoint { + remote-endpoint = <&dsi_lvds_bridge_out>; + }; + }; + }; +}; + +&dsi_bridge { + status = "okay"; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_bridge_out: endpoint { + remote-endpoint = <&dsi_lvds_bridge_in>; + }; + }; +}; + +&dss { + status = "okay"; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2c { + compatible = "ti,sn65dsi83"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi1_bkl_en>; + /* Verdin GPIO_10_DSI (SODIMM 21) - DSI_1_BKL_EN */ + enable-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_lvds_bridge_in: endpoint { + remote-endpoint = <&dsi_bridge_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + + dsi_lvds_bridge_out: endpoint { + remote-endpoint = <&panel_lvds_bridge_in>; + }; + }; + }; + }; + + touchscreen@41 { + compatible = "ilitek,ili2132"; + reg = <0x41>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi1_int>, <&pinctrl_i2s_2_bclk_gpio>; + /* Verdin GPIO_9_DSI (SODIMM 17) - TOUCH_INT# */ + interrupt-parent = <&main_gpio1>; + interrupts = <49 IRQ_TYPE_EDGE_RISING>; + /* Verdin I2S_2_BCLK (SODIMM 42) - TOUCH_RESET# */ + reset-gpios = <&main_gpio0 35 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-uart4-mcu.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-uart4-mcu.dtso new file mode 100644 index 0000000..e263809 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-uart4-mcu.dtso @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) Toradex + * + * Verdin AM62 Cortex-M4F debug UART + */ + +/dts-v1/; +/plugin/; + +&mcu_uart0 { + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index c1e9067..821a970 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -154,6 +154,7 @@ gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; states = <1800000 0x0>, <3300000 0x1>; + bootph-all; }; leds { @@ -407,6 +408,7 @@ pinctrl-single,pins = < AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (N22) GPMC0_CLK.GPIO0_31 */ >; + bootph-all; }; main_ecap0_pins_default: main-ecap0-default-pins { diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index 12a38dd..a19e535 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -250,6 +250,7 @@ regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; + bootph-pre-ram; }; buckb2: buck2 { diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi index ddf20e4..5a5b9a1 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi @@ -18,7 +18,7 @@ &cbass_main { serdes_wiz0: phy@f000000 { - compatible = "ti,am64-wiz-10g"; + compatible = "ti,j722s-wiz-10g", "ti,am64-wiz-10g"; ranges = <0x0f000000 0x0 0x0f000000 0x00010000>; #address-cells = <1>; #size-cells = <1>; @@ -56,7 +56,7 @@ }; serdes_wiz1: phy@f010000 { - compatible = "ti,am64-wiz-10g"; + compatible = "ti,j722s-wiz-10g", "ti,am64-wiz-10g"; ranges = <0x0f010000 0x0 0x0f010000 0x00010000>; #address-cells = <1>; #size-cells = <1>; @@ -430,19 +430,6 @@ ti,sci-rm-range-tchan = <0x22>; }; -/* MCU domain overrides */ - -&mcu_r5fss0_core0 { - firmware-name = "j722s-mcu-r5f0_0-fw"; -}; - -/* Wakeup domain overrides */ - -&wkup_r5fss0_core0 { - firmware-name = "j722s-wkup-r5f0_0-fw"; -}; - -/* MAIN domain overrides */ &hsm { firmware-name = "j722s-hsm-m4f-fw"; }; @@ -457,11 +444,12 @@ }; }; -&wkup_conf { - pcie0_ctrl: pcie0-ctrl@4070 { - compatible = "ti,j784s4-pcie-ctrl", "syscon"; - reg = <0x4070 0x4>; - }; +&cpsw3g { + compatible = "ti,j722s-cpsw-nuss", "ti,am642-cpsw-nuss"; +}; + +&phy_gmii_sel { + compatible = "ti,j722s-phy-gmii-sel", "ti,am654-phy-gmii-sel"; }; &oc_sram { @@ -473,6 +461,10 @@ ti,interrupt-ranges = <7 71 21>; }; +&main_pmx0 { + compatible = "ti,j7200-padconf", "pinctrl-single"; +}; + &main_gpio0 { gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>, <&main_pmx0 70 72 17>; diff --git a/arch/arm64/boot/dts/ti/k3-j722s-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-mcu.dtsi new file mode 100644 index 0000000..ab43a7e --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j722s-mcu.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree file for the J722S MCU domain peripherals + * + * Copyright (C) 2026 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2026 Bootlin + */ + +&mcu_pmx0 { + compatible = "ti,j7200-padconf", "pinctrl-single"; +}; + +&mcu_r5fss0_core0 { + firmware-name = "j722s-mcu-r5f0_0-fw"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j722s-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-wakeup.dtsi new file mode 100644 index 0000000..1297813 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j722s-wakeup.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree file for the J722S WAKEUP domain peripherals + * + * Copyright (C) 2026 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2026 Bootlin + */ + +&wkup_conf { + pcie0_ctrl: pcie0-ctrl@4070 { + compatible = "ti,j784s4-pcie-ctrl", "syscon"; + reg = <0x4070 0x4>; + }; +}; + +&wkup_r5fss0_core0 { + firmware-name = "j722s-wkup-r5f0_0-fw"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi index 1b36dcf..ca10c69 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi @@ -238,3 +238,5 @@ /* Include J722S specific peripherals */ #include "k3-j722s-main.dtsi" +#include "k3-j722s-mcu.dtsi" +#include "k3-j722s-wakeup.dtsi" diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 9dca2f7..2423467 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -706,6 +706,7 @@ CONFIG_PINCTRL_LPASS_LPI=m CONFIG_PINCTRL_MILOS_LPASS_LPI=m CONFIG_PINCTRL_SC7280_LPASS_LPI=m CONFIG_PINCTRL_SM6115_LPASS_LPI=m +CONFIG_PINCTRL_SM6350_LPASS_LPI=m CONFIG_PINCTRL_SM8250_LPASS_LPI=m CONFIG_PINCTRL_SM8450_LPASS_LPI=m CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 82cc85a..a810ad3 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -295,6 +295,15 @@ clocks = <&dcxo>; }; + hstimer@3008000 { + compatible = "allwinner,sun20i-d1-hstimer"; + reg = <0x03008000 0x1000>; + interrupts = , + ; + clocks = <&ccu CLK_BUS_HSTIMER>; + resets = <&ccu RST_BUS_HSTIMER>; + }; + wdt: watchdog@20500a0 { compatible = "allwinner,sun20i-d1-wdt-reset", "allwinner,sun20i-d1-wdt"; diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts index 0e1b0b8..6d7037c 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts @@ -4,6 +4,7 @@ /dts-v1/; #include +#include #include "mpfs.dtsi" #include "mpfs-beaglev-fire-fabric.dtsi" @@ -63,20 +64,29 @@ regulator-max-microvolt = <2800000>; }; - imx219_vdig: fixedregulator-1 { + imx219_vdig: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "imx219_vdig"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - imx219_vddl: fixedregulator-2 { + imx219_vddl: regulator-1v2 { compatible = "regulator-fixed"; regulator-name = "imx219_vddl"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + regulator-1v8-syzygy { + compatible = "regulator-fixed"; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + regulator-name = "syzygy_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + enable-active-high; + }; }; &gpio0 { @@ -85,6 +95,8 @@ <21>, <22>, <23>, <24>, <25>, <26>; ngpios = <14>; + gpio-line-names = "", "", "", "", "", "", "", + "", "", "", "", "", "SD_CARD_CS", "USER_BUTTON"; status = "okay"; }; @@ -96,6 +108,9 @@ <43>, <44>, <45>, <46>, <47>, <48>, <49>, <50>; ngpios = <24>; + gpio-line-names = "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "ADC_IRQn", "", "", "USB_OCn"; status = "okay"; }; @@ -118,20 +133,6 @@ "P8_PIN27", "P8_PIN28", "P8_PIN29", "P8_PIN30", "M2_W_DISABLE1", "M2_W_DISABLE2", "VIO_ENABLE", "SD_DET"; status = "okay"; - - vio-enable-hog { - gpio-hog; - gpios = <30 30>; - output-high; - line-name = "VIO_ENABLE"; - }; - - sd-det-hog { - gpio-hog; - gpios = <31 31>; - input; - line-name = "SD_DET"; - }; }; &i2c0 { @@ -260,6 +261,7 @@ spi-cpha; spi-max-frequency = <5000000>; microchip,hw-device-address = <1>; + interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; status = "okay"; @@ -316,7 +318,7 @@ mmc@1 { compatible = "mmc-spi-slot"; reg = <1>; - gpios = <&gpio2 31 1>; + cd-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; voltage-ranges = <3300 3300>; spi-max-frequency = <5000000>; disable-wp; @@ -326,7 +328,6 @@ &syscontroller { microchip,bitstream-flash = <&sys_ctrl_flash>; - status = "okay"; }; &syscontroller_qspi { diff --git a/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts index f769c9d..da2fcde 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts @@ -199,7 +199,3 @@ &spi1 { status = "okay"; }; - -&syscontroller { - status = "okay"; -}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi index 7816408..a11e310 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi @@ -238,10 +238,6 @@ status = "okay"; }; -&syscontroller { - status = "okay"; -}; - &syscontroller_qspi { /* * The flash *is* there, but Icicle kits that have engineering sample diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts index 8623496..973e34b 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts @@ -179,10 +179,6 @@ status = "okay"; }; -&syscontroller { - status = "okay"; -}; - &usb { status = "okay"; dr_mode = "host"; diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts index 510d591..cad0871 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts @@ -112,7 +112,3 @@ &rtc { status = "okay"; }; - -&syscontroller { - status = "okay"; -}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts index 8f1908a..46ded8a 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts @@ -149,10 +149,6 @@ status = "okay"; }; -&syscontroller { - status = "okay"; -}; - &usb { status = "okay"; dr_mode = "otg"; diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts index bc15530..c695041 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts @@ -171,10 +171,6 @@ }; }; -&syscontroller { - status = "okay"; -}; - &usb { status = "okay"; dr_mode = "host"; diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index d535d4c..85d8df6 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -499,7 +499,7 @@ reg = <0x0 0x20120000 0x0 0x1000>; interrupt-parent = <&irqmux>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, <9>, <10>, <11>, @@ -516,7 +516,7 @@ reg = <0x0 0x20121000 0x0 0x1000>; interrupt-parent = <&irqmux>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; interrupts = <32>, <33>, <34>, <35>, <36>, <37>, <38>, <39>, <40>, <41>, <42>, <43>, @@ -535,7 +535,7 @@ reg = <0x0 0x20122000 0x0 0x1000>; interrupt-parent = <&irqmux>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; interrupts = <64>, <65>, <66>, <67>, <68>, <69>, <70>, <71>, <72>, <73>, <74>, <75>, diff --git a/arch/riscv/boot/dts/microchip/pic64gx-curiosity-kit.dts b/arch/riscv/boot/dts/microchip/pic64gx-curiosity-kit.dts index 2f2ccd7..180fd88 100644 --- a/arch/riscv/boot/dts/microchip/pic64gx-curiosity-kit.dts +++ b/arch/riscv/boot/dts/microchip/pic64gx-curiosity-kit.dts @@ -63,10 +63,6 @@ }; &gpio0 { - interrupts = <13>, <14>, <15>, <16>, - <17>, <18>, <19>, <20>, - <21>, <22>, <23>, <24>, - <25>, <26>; status ="okay"; gpio-line-names = "", "", "", "", "", "", "", "", @@ -74,12 +70,6 @@ }; &gpio1 { - interrupts = <27>, <28>, <29>, <30>, - <31>, <32>, <33>, <34>, - <35>, <36>, <37>, <38>, - <39>, <40>, <41>, <42>, - <43>, <44>, <45>, <46>, - <47>, <48>, <49>, <50>; status ="okay"; gpio-line-names = "", "", "LED1", "LED2", "LED3", "LED4", "LED5", "LED6", @@ -88,14 +78,6 @@ }; &gpio2 { - interrupts = <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>; pinctrl-names = "default"; pinctrl-0 = <&mdio1_gpio>, <&spi0_gpio>, <&can0_gpio>, <&pcie_gpio>, <&qspi_gpio>, <&uart3_gpio>, <&uart4_gpio>, <&can1_gpio>; @@ -107,6 +89,43 @@ "DIP4", "USR_IO11", "", "", "SWITCH1", "", "", ""; }; +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&irqmux { + interrupt-map = <0 &plic 13>, <1 &plic 14>, <2 &plic 15>, + <3 &plic 16>, <4 &plic 17>, <5 &plic 18>, + <6 &plic 19>, <7 &plic 20>, <8 &plic 21>, + <9 &plic 22>, <10 &plic 23>, <11 &plic 24>, + <12 &plic 25>, <13 &plic 26>, + + <32 &plic 27>, <33 &plic 28>, <34 &plic 29>, + <35 &plic 30>, <36 &plic 31>, <37 &plic 32>, + <38 &plic 33>, <39 &plic 34>, <40 &plic 35>, + <41 &plic 36>, <42 &plic 37>, <43 &plic 38>, + <44 &plic 39>, <45 &plic 40>, <46 &plic 41>, + <47 &plic 42>, <48 &plic 43>, <49 &plic 44>, + <50 &plic 45>, <51 &plic 46>, <52 &plic 47>, + <53 &plic 48>, <54 &plic 49>, <55 &plic 50>, + + <64 &plic 53>, <65 &plic 53>, <66 &plic 53>, + <67 &plic 53>, <68 &plic 53>, <69 &plic 53>, + <70 &plic 53>, <71 &plic 53>, <72 &plic 53>, + <73 &plic 53>, <74 &plic 53>, <75 &plic 53>, + <76 &plic 53>, <77 &plic 53>, <78 &plic 53>, + <79 &plic 53>, <80 &plic 53>, <81 &plic 53>, + <82 &plic 53>, <83 &plic 53>, <84 &plic 53>, + <85 &plic 53>, <86 &plic 53>, <87 &plic 53>, + <88 &plic 53>, <89 &plic 53>, <90 &plic 53>, + <91 &plic 53>, <92 &plic 53>, <93 &plic 53>, + <94 &plic 53>, <95 &plic 53>; +}; + &mac0 { status = "okay"; phy-mode = "sgmii"; @@ -123,14 +142,6 @@ status = "okay"; }; -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - &mmc { bus-width = <4>; disable-wp; @@ -159,7 +170,3 @@ &rtc { status = "okay"; }; - -&syscontroller { - status = "okay"; -}; diff --git a/arch/riscv/boot/dts/microchip/pic64gx.dtsi b/arch/riscv/boot/dts/microchip/pic64gx.dtsi index c164d7b..5addfd4 100644 --- a/arch/riscv/boot/dts/microchip/pic64gx.dtsi +++ b/arch/riscv/boot/dts/microchip/pic64gx.dtsi @@ -295,6 +295,14 @@ #size-cells = <1>; #reset-cells = <1>; + irqmux: interrupt-controller@54 { + compatible = "microchip,pic64gx-irqmux", "microchip,mpfs-irqmux"; + reg = <0x54 0x4>; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x7f>; + }; + iomux0: pinctrl@200 { compatible = "microchip,pic64gx-pinctrl-iomux0", "microchip,mpfs-pinctrl-iomux0"; @@ -459,8 +467,8 @@ interrupts = <64>, <65>, <66>, <67>, <68>, <69>; /* Filled in by a bootloader */ local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; - clock-names = "pclk", "hclk"; + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>, <&refclk>; + clock-names = "pclk", "hclk", "tsu_clk"; resets = <&mss_top_sysreg CLK_MAC0>; status = "disabled"; }; @@ -475,8 +483,8 @@ interrupts = <70>, <71>, <72>, <73>, <74>, <75>; /* Filled in by a bootloader */ local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; - clock-names = "pclk", "hclk"; + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>, <&refclk>; + clock-names = "pclk", "hclk", "tsu_clk"; resets = <&mss_top_sysreg CLK_MAC1>; status = "disabled"; }; @@ -484,9 +492,13 @@ gpio0: gpio@20120000 { compatible = "microchip,pic64gx-gpio", "microchip,mpfs-gpio"; reg = <0x0 0x20120000 0x0 0x1000>; - interrupt-parent = <&plic>; + interrupt-parent = <&irqmux>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; + interrupts = <0>, <1>, <2>, <3>, + <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>, + <12>, <13>; clocks = <&clkcfg CLK_GPIO0>; gpio-controller; #gpio-cells = <2>; @@ -497,9 +509,15 @@ gpio1: gpio@20121000 { compatible = "microchip,pic64gx-gpio", "microchip,mpfs-gpio"; reg = <0x0 0x20121000 0x0 0x1000>; - interrupt-parent = <&plic>; + interrupt-parent = <&irqmux>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; + interrupts = <32>, <33>, <34>, <35>, + <36>, <37>, <38>, <39>, + <40>, <41>, <42>, <43>, + <44>, <45>, <46>, <47>, + <48>, <49>, <50>, <51>, + <52>, <53>, <54>, <55>; clocks = <&clkcfg CLK_GPIO1>; gpio-controller; #gpio-cells = <2>; @@ -510,9 +528,17 @@ gpio2: gpio@20122000 { compatible = "microchip,pic64gx-gpio", "microchip,mpfs-gpio"; reg = <0x0 0x20122000 0x0 0x1000>; - interrupt-parent = <&plic>; + interrupt-parent = <&irqmux>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; + interrupts = <64>, <65>, <66>, <67>, + <68>, <69>, <70>, <71>, + <72>, <73>, <74>, <75>, + <76>, <77>, <78>, <79>, + <80>, <81>, <82>, <83>, + <84>, <85>, <86>, <87>, + <88>, <89>, <90>, <91>, + <92>, <93>, <94>, <95>; clocks = <&clkcfg CLK_GPIO2>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi b/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi index 509488e..fd8906b 100644 --- a/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi +++ b/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi @@ -263,7 +263,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <0>; + reg = <0x0>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -291,7 +291,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <1>; + reg = <0x1>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -319,7 +319,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <2>; + reg = <0x2>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -347,7 +347,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <3>; + reg = <0x3>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -375,7 +375,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <4>; + reg = <0x4>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -403,7 +403,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <5>; + reg = <0x5>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -431,7 +431,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <6>; + reg = <0x6>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -459,7 +459,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <7>; + reg = <0x7>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -487,7 +487,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <8>; + reg = <0x8>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -515,7 +515,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <9>; + reg = <0x9>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -533,7 +533,7 @@ }; }; - cpu10: cpu@10 { + cpu10: cpu@a { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -543,7 +543,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <10>; + reg = <0xa>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -561,7 +561,7 @@ }; }; - cpu11: cpu@11 { + cpu11: cpu@b { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -571,7 +571,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <11>; + reg = <0xb>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -589,7 +589,7 @@ }; }; - cpu12: cpu@12 { + cpu12: cpu@c { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -599,7 +599,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <12>; + reg = <0xc>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -617,7 +617,7 @@ }; }; - cpu13: cpu@13 { + cpu13: cpu@d { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -627,7 +627,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <13>; + reg = <0xd>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -645,7 +645,7 @@ }; }; - cpu14: cpu@14 { + cpu14: cpu@e { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -655,7 +655,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <14>; + reg = <0xe>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -673,7 +673,7 @@ }; }; - cpu15: cpu@15 { + cpu15: cpu@f { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -683,7 +683,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <15>; + reg = <0xf>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -701,7 +701,7 @@ }; }; - cpu16: cpu@16 { + cpu16: cpu@10 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -711,7 +711,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <16>; + reg = <0x10>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -729,7 +729,7 @@ }; }; - cpu17: cpu@17 { + cpu17: cpu@11 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -739,7 +739,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <17>; + reg = <0x11>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -757,7 +757,7 @@ }; }; - cpu18: cpu@18 { + cpu18: cpu@12 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -767,7 +767,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <18>; + reg = <0x12>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -785,7 +785,7 @@ }; }; - cpu19: cpu@19 { + cpu19: cpu@13 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -795,7 +795,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <19>; + reg = <0x13>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -813,7 +813,7 @@ }; }; - cpu20: cpu@20 { + cpu20: cpu@14 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -823,7 +823,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <20>; + reg = <0x14>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -841,7 +841,7 @@ }; }; - cpu21: cpu@21 { + cpu21: cpu@15 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -851,7 +851,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <21>; + reg = <0x15>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -869,7 +869,7 @@ }; }; - cpu22: cpu@22 { + cpu22: cpu@16 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -879,7 +879,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <22>; + reg = <0x16>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -897,7 +897,7 @@ }; }; - cpu23: cpu@23 { + cpu23: cpu@17 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -907,7 +907,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <23>; + reg = <0x17>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -925,7 +925,7 @@ }; }; - cpu24: cpu@24 { + cpu24: cpu@18 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -935,7 +935,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <24>; + reg = <0x18>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -953,7 +953,7 @@ }; }; - cpu25: cpu@25 { + cpu25: cpu@19 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -963,7 +963,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <25>; + reg = <0x19>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -981,7 +981,7 @@ }; }; - cpu26: cpu@26 { + cpu26: cpu@1a { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -991,7 +991,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <26>; + reg = <0x1a>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1009,7 +1009,7 @@ }; }; - cpu27: cpu@27 { + cpu27: cpu@1b { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1019,7 +1019,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <27>; + reg = <0x1b>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1037,7 +1037,7 @@ }; }; - cpu28: cpu@28 { + cpu28: cpu@1c { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1047,7 +1047,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <28>; + reg = <0x1c>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1065,7 +1065,7 @@ }; }; - cpu29: cpu@29 { + cpu29: cpu@1d { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1075,7 +1075,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <29>; + reg = <0x1d>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1093,7 +1093,7 @@ }; }; - cpu30: cpu@30 { + cpu30: cpu@1e { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1103,7 +1103,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <30>; + reg = <0x1e>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1121,7 +1121,7 @@ }; }; - cpu31: cpu@31 { + cpu31: cpu@1f { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1131,7 +1131,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <31>; + reg = <0x1f>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1149,7 +1149,7 @@ }; }; - cpu32: cpu@32 { + cpu32: cpu@20 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1159,7 +1159,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <32>; + reg = <0x20>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1177,7 +1177,7 @@ }; }; - cpu33: cpu@33 { + cpu33: cpu@21 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1187,7 +1187,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <33>; + reg = <0x21>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1205,7 +1205,7 @@ }; }; - cpu34: cpu@34 { + cpu34: cpu@22 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1215,7 +1215,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <34>; + reg = <0x22>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1233,7 +1233,7 @@ }; }; - cpu35: cpu@35 { + cpu35: cpu@23 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1243,7 +1243,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <35>; + reg = <0x23>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1261,7 +1261,7 @@ }; }; - cpu36: cpu@36 { + cpu36: cpu@24 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1271,7 +1271,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <36>; + reg = <0x24>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1289,7 +1289,7 @@ }; }; - cpu37: cpu@37 { + cpu37: cpu@25 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1299,7 +1299,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <37>; + reg = <0x25>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1317,7 +1317,7 @@ }; }; - cpu38: cpu@38 { + cpu38: cpu@26 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1327,7 +1327,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <38>; + reg = <0x26>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1345,7 +1345,7 @@ }; }; - cpu39: cpu@39 { + cpu39: cpu@27 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1355,7 +1355,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <39>; + reg = <0x27>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1373,7 +1373,7 @@ }; }; - cpu40: cpu@40 { + cpu40: cpu@28 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1383,7 +1383,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <40>; + reg = <0x28>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1401,7 +1401,7 @@ }; }; - cpu41: cpu@41 { + cpu41: cpu@29 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1411,7 +1411,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <41>; + reg = <0x29>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1429,7 +1429,7 @@ }; }; - cpu42: cpu@42 { + cpu42: cpu@2a { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1439,7 +1439,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <42>; + reg = <0x2a>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1457,7 +1457,7 @@ }; }; - cpu43: cpu@43 { + cpu43: cpu@2b { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1467,7 +1467,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <43>; + reg = <0x2b>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1485,7 +1485,7 @@ }; }; - cpu44: cpu@44 { + cpu44: cpu@2c { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1495,7 +1495,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <44>; + reg = <0x2c>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1513,7 +1513,7 @@ }; }; - cpu45: cpu@45 { + cpu45: cpu@2d { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1523,7 +1523,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <45>; + reg = <0x2d>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1541,7 +1541,7 @@ }; }; - cpu46: cpu@46 { + cpu46: cpu@2e { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1551,7 +1551,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <46>; + reg = <0x2e>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1569,7 +1569,7 @@ }; }; - cpu47: cpu@47 { + cpu47: cpu@2f { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1579,7 +1579,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <47>; + reg = <0x2f>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1597,7 +1597,7 @@ }; }; - cpu48: cpu@48 { + cpu48: cpu@30 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1607,7 +1607,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <48>; + reg = <0x30>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1625,7 +1625,7 @@ }; }; - cpu49: cpu@49 { + cpu49: cpu@31 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1635,7 +1635,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <49>; + reg = <0x31>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1653,7 +1653,7 @@ }; }; - cpu50: cpu@50 { + cpu50: cpu@32 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1663,7 +1663,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <50>; + reg = <0x32>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1681,7 +1681,7 @@ }; }; - cpu51: cpu@51 { + cpu51: cpu@33 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1691,7 +1691,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <51>; + reg = <0x33>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1709,7 +1709,7 @@ }; }; - cpu52: cpu@52 { + cpu52: cpu@34 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1719,7 +1719,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <52>; + reg = <0x34>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1737,7 +1737,7 @@ }; }; - cpu53: cpu@53 { + cpu53: cpu@35 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1747,7 +1747,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <53>; + reg = <0x35>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1765,7 +1765,7 @@ }; }; - cpu54: cpu@54 { + cpu54: cpu@36 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1775,7 +1775,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <54>; + reg = <0x36>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1793,7 +1793,7 @@ }; }; - cpu55: cpu@55 { + cpu55: cpu@37 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1803,7 +1803,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <55>; + reg = <0x37>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1821,7 +1821,7 @@ }; }; - cpu56: cpu@56 { + cpu56: cpu@38 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1831,7 +1831,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <56>; + reg = <0x38>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1849,7 +1849,7 @@ }; }; - cpu57: cpu@57 { + cpu57: cpu@39 { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1859,7 +1859,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <57>; + reg = <0x39>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1877,7 +1877,7 @@ }; }; - cpu58: cpu@58 { + cpu58: cpu@3a { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1887,7 +1887,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <58>; + reg = <0x3a>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1905,7 +1905,7 @@ }; }; - cpu59: cpu@59 { + cpu59: cpu@3b { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1915,7 +1915,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <59>; + reg = <0x3b>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1933,7 +1933,7 @@ }; }; - cpu60: cpu@60 { + cpu60: cpu@3c { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1943,7 +1943,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <60>; + reg = <0x3c>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1961,7 +1961,7 @@ }; }; - cpu61: cpu@61 { + cpu61: cpu@3d { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1971,7 +1971,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <61>; + reg = <0x3d>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1989,7 +1989,7 @@ }; }; - cpu62: cpu@62 { + cpu62: cpu@3e { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -1999,7 +1999,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <62>; + reg = <0x3e>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -2017,7 +2017,7 @@ }; }; - cpu63: cpu@63 { + cpu63: cpu@3f { compatible = "thead,c920", "riscv"; device_type = "cpu"; riscv,isa = "rv64imafdc"; @@ -2027,7 +2027,7 @@ "zifencei", "zihpm", "zfh", "xtheadvector"; thead,vlenb = <16>; - reg = <63>; + reg = <0x3f>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi index 9fddf3f..7eab065 100644 --- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi +++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi @@ -234,7 +234,7 @@ reg-names = "clr", "doorbell"; msi-controller; #msi-cells = <0>; - msi-ranges = <&intc 64 IRQ_TYPE_EDGE_RISING 32>; + msi-ranges = <&intc 64 IRQ_TYPE_EDGE_RISING 16>; }; rpgate: clock-controller@7030010368 { @@ -417,6 +417,7 @@ vendor-id = <0x1f1c>; device-id = <0x2042>; cdns,no-bar-match-nbits = <48>; + dma-coherent; msi-parent = <&msi>; status = "disabled"; }; @@ -439,6 +440,7 @@ vendor-id = <0x1f1c>; device-id = <0x2042>; cdns,no-bar-match-nbits = <48>; + dma-coherent; msi-parent = <&msi>; status = "disabled"; }; @@ -461,6 +463,7 @@ vendor-id = <0x1f1c>; device-id = <0x2042>; cdns,no-bar-match-nbits = <48>; + dma-coherent; msi-parent = <&msi>; status = "disabled"; }; @@ -483,6 +486,7 @@ vendor-id = <0x1f1c>; device-id = <0x2042>; cdns,no-bar-match-nbits = <48>; + dma-coherent; msi-parent = <&msi>; status = "disabled"; }; diff --git a/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi b/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi index 3135409..f66a382 100644 --- a/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi +++ b/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi @@ -14,7 +14,7 @@ cpu0: cpu@0 { compatible = "thead,c920", "riscv"; - reg = <0>; + reg = <0x0>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -50,7 +50,7 @@ cpu1: cpu@1 { compatible = "thead,c920", "riscv"; - reg = <1>; + reg = <0x1>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -86,7 +86,7 @@ cpu2: cpu@2 { compatible = "thead,c920", "riscv"; - reg = <2>; + reg = <0x2>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -122,7 +122,7 @@ cpu3: cpu@3 { compatible = "thead,c920", "riscv"; - reg = <3>; + reg = <0x3>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -158,7 +158,7 @@ cpu4: cpu@4 { compatible = "thead,c920", "riscv"; - reg = <4>; + reg = <0x4>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -194,7 +194,7 @@ cpu5: cpu@5 { compatible = "thead,c920", "riscv"; - reg = <5>; + reg = <0x5>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -230,7 +230,7 @@ cpu6: cpu@6 { compatible = "thead,c920", "riscv"; - reg = <6>; + reg = <0x6>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -266,7 +266,7 @@ cpu7: cpu@7 { compatible = "thead,c920", "riscv"; - reg = <7>; + reg = <0x7>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -302,7 +302,7 @@ cpu8: cpu@8 { compatible = "thead,c920", "riscv"; - reg = <8>; + reg = <0x8>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -338,7 +338,7 @@ cpu9: cpu@9 { compatible = "thead,c920", "riscv"; - reg = <9>; + reg = <0x9>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -372,9 +372,9 @@ }; }; - cpu10: cpu@10 { + cpu10: cpu@a { compatible = "thead,c920", "riscv"; - reg = <10>; + reg = <0xa>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -408,9 +408,9 @@ }; }; - cpu11: cpu@11 { + cpu11: cpu@b { compatible = "thead,c920", "riscv"; - reg = <11>; + reg = <0xb>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -444,9 +444,9 @@ }; }; - cpu12: cpu@12 { + cpu12: cpu@c { compatible = "thead,c920", "riscv"; - reg = <12>; + reg = <0xc>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -480,9 +480,9 @@ }; }; - cpu13: cpu@13 { + cpu13: cpu@d { compatible = "thead,c920", "riscv"; - reg = <13>; + reg = <0xd>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -516,9 +516,9 @@ }; }; - cpu14: cpu@14 { + cpu14: cpu@e { compatible = "thead,c920", "riscv"; - reg = <14>; + reg = <0xe>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -552,9 +552,9 @@ }; }; - cpu15: cpu@15 { + cpu15: cpu@f { compatible = "thead,c920", "riscv"; - reg = <15>; + reg = <0xf>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -588,9 +588,9 @@ }; }; - cpu16: cpu@16 { + cpu16: cpu@10 { compatible = "thead,c920", "riscv"; - reg = <16>; + reg = <0x10>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -624,9 +624,9 @@ }; }; - cpu17: cpu@17 { + cpu17: cpu@11 { compatible = "thead,c920", "riscv"; - reg = <17>; + reg = <0x11>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -660,9 +660,9 @@ }; }; - cpu18: cpu@18 { + cpu18: cpu@12 { compatible = "thead,c920", "riscv"; - reg = <18>; + reg = <0x12>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -696,9 +696,9 @@ }; }; - cpu19: cpu@19 { + cpu19: cpu@13 { compatible = "thead,c920", "riscv"; - reg = <19>; + reg = <0x13>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -732,9 +732,9 @@ }; }; - cpu20: cpu@20 { + cpu20: cpu@14 { compatible = "thead,c920", "riscv"; - reg = <20>; + reg = <0x14>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -768,9 +768,9 @@ }; }; - cpu21: cpu@21 { + cpu21: cpu@15 { compatible = "thead,c920", "riscv"; - reg = <21>; + reg = <0x15>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -804,9 +804,9 @@ }; }; - cpu22: cpu@22 { + cpu22: cpu@16 { compatible = "thead,c920", "riscv"; - reg = <22>; + reg = <0x16>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -840,9 +840,9 @@ }; }; - cpu23: cpu@23 { + cpu23: cpu@17 { compatible = "thead,c920", "riscv"; - reg = <23>; + reg = <0x17>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -876,9 +876,9 @@ }; }; - cpu24: cpu@24 { + cpu24: cpu@18 { compatible = "thead,c920", "riscv"; - reg = <24>; + reg = <0x18>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -912,9 +912,9 @@ }; }; - cpu25: cpu@25 { + cpu25: cpu@19 { compatible = "thead,c920", "riscv"; - reg = <25>; + reg = <0x19>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -948,9 +948,9 @@ }; }; - cpu26: cpu@26 { + cpu26: cpu@1a { compatible = "thead,c920", "riscv"; - reg = <26>; + reg = <0x1a>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -984,9 +984,9 @@ }; }; - cpu27: cpu@27 { + cpu27: cpu@1b { compatible = "thead,c920", "riscv"; - reg = <27>; + reg = <0x1b>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1020,9 +1020,9 @@ }; }; - cpu28: cpu@28 { + cpu28: cpu@1c { compatible = "thead,c920", "riscv"; - reg = <28>; + reg = <0x1c>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1056,9 +1056,9 @@ }; }; - cpu29: cpu@29 { + cpu29: cpu@1d { compatible = "thead,c920", "riscv"; - reg = <29>; + reg = <0x1d>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1092,9 +1092,9 @@ }; }; - cpu30: cpu@30 { + cpu30: cpu@1e { compatible = "thead,c920", "riscv"; - reg = <30>; + reg = <0x1e>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1128,9 +1128,9 @@ }; }; - cpu31: cpu@31 { + cpu31: cpu@1f { compatible = "thead,c920", "riscv"; - reg = <31>; + reg = <0x1f>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1164,9 +1164,9 @@ }; }; - cpu32: cpu@32 { + cpu32: cpu@20 { compatible = "thead,c920", "riscv"; - reg = <32>; + reg = <0x20>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1200,9 +1200,9 @@ }; }; - cpu33: cpu@33 { + cpu33: cpu@21 { compatible = "thead,c920", "riscv"; - reg = <33>; + reg = <0x21>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1236,9 +1236,9 @@ }; }; - cpu34: cpu@34 { + cpu34: cpu@22 { compatible = "thead,c920", "riscv"; - reg = <34>; + reg = <0x22>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1272,9 +1272,9 @@ }; }; - cpu35: cpu@35 { + cpu35: cpu@23 { compatible = "thead,c920", "riscv"; - reg = <35>; + reg = <0x23>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1308,9 +1308,9 @@ }; }; - cpu36: cpu@36 { + cpu36: cpu@24 { compatible = "thead,c920", "riscv"; - reg = <36>; + reg = <0x24>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1344,9 +1344,9 @@ }; }; - cpu37: cpu@37 { + cpu37: cpu@25 { compatible = "thead,c920", "riscv"; - reg = <37>; + reg = <0x25>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1380,9 +1380,9 @@ }; }; - cpu38: cpu@38 { + cpu38: cpu@26 { compatible = "thead,c920", "riscv"; - reg = <38>; + reg = <0x26>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1416,9 +1416,9 @@ }; }; - cpu39: cpu@39 { + cpu39: cpu@27 { compatible = "thead,c920", "riscv"; - reg = <39>; + reg = <0x27>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1452,9 +1452,9 @@ }; }; - cpu40: cpu@40 { + cpu40: cpu@28 { compatible = "thead,c920", "riscv"; - reg = <40>; + reg = <0x28>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1488,9 +1488,9 @@ }; }; - cpu41: cpu@41 { + cpu41: cpu@29 { compatible = "thead,c920", "riscv"; - reg = <41>; + reg = <0x29>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1524,9 +1524,9 @@ }; }; - cpu42: cpu@42 { + cpu42: cpu@2a { compatible = "thead,c920", "riscv"; - reg = <42>; + reg = <0x2a>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1560,9 +1560,9 @@ }; }; - cpu43: cpu@43 { + cpu43: cpu@2b { compatible = "thead,c920", "riscv"; - reg = <43>; + reg = <0x2b>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1596,9 +1596,9 @@ }; }; - cpu44: cpu@44 { + cpu44: cpu@2c { compatible = "thead,c920", "riscv"; - reg = <44>; + reg = <0x2c>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1632,9 +1632,9 @@ }; }; - cpu45: cpu@45 { + cpu45: cpu@2d { compatible = "thead,c920", "riscv"; - reg = <45>; + reg = <0x2d>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1668,9 +1668,9 @@ }; }; - cpu46: cpu@46 { + cpu46: cpu@2e { compatible = "thead,c920", "riscv"; - reg = <46>; + reg = <0x2e>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1704,9 +1704,9 @@ }; }; - cpu47: cpu@47 { + cpu47: cpu@2f { compatible = "thead,c920", "riscv"; - reg = <47>; + reg = <0x2f>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1740,9 +1740,9 @@ }; }; - cpu48: cpu@48 { + cpu48: cpu@30 { compatible = "thead,c920", "riscv"; - reg = <48>; + reg = <0x30>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1776,9 +1776,9 @@ }; }; - cpu49: cpu@49 { + cpu49: cpu@31 { compatible = "thead,c920", "riscv"; - reg = <49>; + reg = <0x31>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1812,9 +1812,9 @@ }; }; - cpu50: cpu@50 { + cpu50: cpu@32 { compatible = "thead,c920", "riscv"; - reg = <50>; + reg = <0x32>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1848,9 +1848,9 @@ }; }; - cpu51: cpu@51 { + cpu51: cpu@33 { compatible = "thead,c920", "riscv"; - reg = <51>; + reg = <0x33>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1884,9 +1884,9 @@ }; }; - cpu52: cpu@52 { + cpu52: cpu@34 { compatible = "thead,c920", "riscv"; - reg = <52>; + reg = <0x34>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1920,9 +1920,9 @@ }; }; - cpu53: cpu@53 { + cpu53: cpu@35 { compatible = "thead,c920", "riscv"; - reg = <53>; + reg = <0x35>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1956,9 +1956,9 @@ }; }; - cpu54: cpu@54 { + cpu54: cpu@36 { compatible = "thead,c920", "riscv"; - reg = <54>; + reg = <0x36>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -1992,9 +1992,9 @@ }; }; - cpu55: cpu@55 { + cpu55: cpu@37 { compatible = "thead,c920", "riscv"; - reg = <55>; + reg = <0x37>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -2028,9 +2028,9 @@ }; }; - cpu56: cpu@56 { + cpu56: cpu@38 { compatible = "thead,c920", "riscv"; - reg = <56>; + reg = <0x38>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -2064,9 +2064,9 @@ }; }; - cpu57: cpu@57 { + cpu57: cpu@39 { compatible = "thead,c920", "riscv"; - reg = <57>; + reg = <0x39>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -2100,9 +2100,9 @@ }; }; - cpu58: cpu@58 { + cpu58: cpu@3a { compatible = "thead,c920", "riscv"; - reg = <58>; + reg = <0x3a>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -2136,9 +2136,9 @@ }; }; - cpu59: cpu@59 { + cpu59: cpu@3b { compatible = "thead,c920", "riscv"; - reg = <59>; + reg = <0x3b>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -2172,9 +2172,9 @@ }; }; - cpu60: cpu@60 { + cpu60: cpu@3c { compatible = "thead,c920", "riscv"; - reg = <60>; + reg = <0x3c>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -2208,9 +2208,9 @@ }; }; - cpu61: cpu@61 { + cpu61: cpu@3d { compatible = "thead,c920", "riscv"; - reg = <61>; + reg = <0x3d>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -2244,9 +2244,9 @@ }; }; - cpu62: cpu@62 { + cpu62: cpu@3e { compatible = "thead,c920", "riscv"; - reg = <62>; + reg = <0x3e>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; @@ -2280,9 +2280,9 @@ }; }; - cpu63: cpu@63 { + cpu63: cpu@3f { compatible = "thead,c920", "riscv"; - reg = <63>; + reg = <0x3f>; i-cache-block-size = <64>; i-cache-size = <65536>; i-cache-sets = <512>; diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile index 7e2b877..28ec9e1 100644 --- a/arch/riscv/boot/dts/spacemit/Makefile +++ b/arch/riscv/boot/dts/spacemit/Makefile @@ -4,4 +4,6 @@ dtb-$(CONFIG_ARCH_SPACEMIT) += k1-milkv-jupiter.dtb dtb-$(CONFIG_ARCH_SPACEMIT) += k1-musepi-pro.dtb dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-r2s.dtb dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb +dtb-$(CONFIG_ARCH_SPACEMIT) += k3-com260-ifx.dtb +dtb-$(CONFIG_ARCH_SPACEMIT) += k3-deepcomputing-fml13v05.dtb dtb-$(CONFIG_ARCH_SPACEMIT) += k3-pico-itx.dtb diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts index 5790d92..72f77e9 100644 --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts @@ -14,12 +14,15 @@ ethernet0 = ð0; ethernet1 = ð1; serial0 = &uart0; + spi3 = &spi3; i2c2 = &i2c2; i2c8 = &i2c8; + mmc0 = &emmc; + mmc1 = &sdhci0; }; chosen { - stdout-path = "serial0"; + stdout-path = "serial0:115200n8"; }; leds { @@ -220,7 +223,7 @@ regulator-always-on; }; - buck4 { + buck4: buck4 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <3300000>; regulator-ramp-delay = <5000>; @@ -241,7 +244,7 @@ regulator-always-on; }; - aldo1 { + aldo1: aldo1 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -335,6 +338,12 @@ status = "okay"; }; +&spi3 { + pinctrl-0 = <&ssp3_0_cfg>; + pinctrl-names = "default"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_2_cfg>; @@ -367,3 +376,21 @@ reset-gpios = <&gpio K1_GPIO(124) GPIO_ACTIVE_LOW>; }; }; + +&sdhci0 { + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&mmc1_cfg>; + pinctrl-1 = <&mmc1_uhs_cfg>; + bus-width = <4>; + cd-gpios = <&gpio K1_GPIO(80) (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + no-mmc; + no-sdio; + disable-wp; + cap-sd-highspeed; + vmmc-supply = <&buck4>; + vqmmc-supply = <&aldo1>; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts index afaad59..2fc8d65 100644 --- a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts +++ b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts @@ -14,13 +14,15 @@ aliases { ethernet0 = ð0; ethernet1 = ð1; - serial0 = &uart0; i2c2 = &i2c2; i2c8 = &i2c8; + mmc0 = &emmc; + mmc1 = &sdhci0; + serial0 = &uart0; }; chosen { - stdout-path = "serial0"; + stdout-path = "serial0:115200n8"; }; leds { @@ -105,6 +107,16 @@ status = "okay"; }; +&emmc { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + ð0 { phy-handle = <&rgmii0>; phy-mode = "rgmii-id"; @@ -239,7 +251,7 @@ regulator-always-on; }; - aldo1 { + aldo1: aldo1 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -367,13 +379,31 @@ opensbi@70000 { reg = <0x70000 0x30000>; }; - uboot@a00000 { + uboot@a0000 { reg = <0xa0000 0x760000>; }; }; }; }; +&sdhci0 { + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&mmc1_cfg>; + pinctrl-1 = <&mmc1_uhs_cfg>; + bus-width = <4>; + cd-gpios = <&gpio K1_GPIO(80) (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + no-mmc; + no-sdio; + disable-wp; + cap-sd-highspeed; + vmmc-supply = <&buck4_3v3>; + vqmmc-supply = <&aldo1>; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_2_cfg>; diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts index 29e333b..0d809e4 100644 --- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts +++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts @@ -17,10 +17,14 @@ aliases { ethernet0 = ð0; serial0 = &uart0; + i2c2 = &i2c2; + i2c8 = &i2c8; + mmc0 = &emmc; + mmc1 = &sdhci0; }; chosen { - stdout-path = "serial0"; + stdout-path = "serial0:115200n8"; }; leds { @@ -33,6 +37,52 @@ default-state = "on"; }; }; + + reg_pcie_vcc_3v3: regulator-pcie-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "PCIE_VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vcc_4v: regulator-vcc-4v { + compatible = "regulator-fixed"; + regulator-name = "VCC4V0"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_qspi_vcc1v833: regulator-qspi-vcc1v833 { + compatible = "regulator-fixed"; + regulator-name = "QSPI_VCC1833"; + regulator-min-microvolt = <1833000>; + regulator-max-microvolt = <1833000>; + regulator-always-on; + vin-supply = <&buck4_3v3>; + }; + + reg_5v_vbus: regulator-5v-vbus { + compatible = "regulator-fixed"; + regulator-name = "5V_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + gpio = <&gpio K1_GPIO(79) GPIO_ACTIVE_HIGH>; /* USB3_PWREN */ + enable-active-high; + }; + + reg_vcc5v_hub: regulator-vcc5v-hub { + compatible = "regulator-fixed"; + regulator-name = "VCC5V0_HUB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + gpio = <&gpio K1_GPIO(127) GPIO_ACTIVE_HIGH>; /* HUB_PWREN */ + enable-active-high; + }; }; &emmc { @@ -45,6 +95,10 @@ status = "okay"; }; +&combo_phy { + status = "okay"; +}; + ð0 { phy-handle = <&rgmii0>; phy-mode = "rgmii-id"; @@ -72,8 +126,281 @@ status = "okay"; }; +&i2c2 { + pinctrl-0 = <&i2c2_0_cfg>; + pinctrl-names = "default"; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + vcc-supply = <&buck3_1v8>; /* EEPROM_VCC1V8 */ + pagesize = <8>; + read-only; + size = <256>; + + nvmem-layout { + compatible = "onie,tlv-layout"; + + product-name { + }; + + serial-number { + }; + + mac-address { + #nvmem-cell-cells = <1>; + }; + + num-macs { + }; + }; + }; +}; + +&i2c8 { + pinctrl-0 = <&i2c8_cfg>; + pinctrl-names = "default"; + status = "okay"; + + pmic@41 { + compatible = "spacemit,p1"; + reg = <0x41>; + interrupts = <64>; + vin1-supply = <®_vcc_4v>; + vin2-supply = <®_vcc_4v>; + vin3-supply = <®_vcc_4v>; + vin4-supply = <®_vcc_4v>; + vin5-supply = <®_vcc_4v>; + vin6-supply = <®_vcc_4v>; + aldoin-supply = <®_vcc_4v>; + dldoin1-supply = <&buck5>; + dldoin2-supply = <&buck5>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck3_1v8: buck3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck4_3v3: buck4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck5: buck5 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + aldo1: aldo1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + aldo2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + aldo3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + aldo4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + dldo2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + dldo5 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + dldo7 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + +&pcie1_phy { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_3_cfg>; + status = "okay"; +}; + +&pcie1_port { + phys = <&pcie1_phy>; + vpcie3v3-supply = <®_pcie_vcc_3v3>; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_4_cfg>; + status = "okay"; +}; + +&pcie2_port { + phys = <&pcie2_phy>; + vpcie3v3-supply = <®_pcie_vcc_3v3>; +}; + +&pcie2 { + status = "okay"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&qspi_cfg>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <26500000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + vcc-supply = <®_qspi_vcc1v833>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootinfo@0 { + reg = <0x0 0x10000>; + }; + private@10000 { + reg = <0x10000 0x10000>; + }; + fsbl@20000 { + reg = <0x20000 0x40000>; + }; + env@60000 { + reg = <0x60000 0x10000>; + }; + opensbi@70000 { + reg = <0x70000 0x30000>; + }; + uboot@a0000 { + reg = <0xa0000 0x760000>; + }; + }; + }; +}; + &uart0 { pinctrl-0 = <&uart0_2_cfg>; pinctrl-names = "default"; status = "okay"; }; + +&usbphy2 { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + vbus-supply = <®_5v_vbus>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb2109,2817"; + reg = <0x1>; + vdd-supply = <®_vcc5v_hub>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio K1_GPIO(123) GPIO_ACTIVE_LOW>; /* HUB_RST */ + }; + + hub_3_0: hub@2 { + compatible = "usb2109,817"; + reg = <0x2>; + vdd-supply = <®_vcc5v_hub>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio K1_GPIO(123) GPIO_ACTIVE_LOW>; /* HUB_RST */ + }; +}; + +&sdhci0 { + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&mmc1_cfg>; + pinctrl-1 = <&mmc1_uhs_cfg>; + bus-width = <4>; + cd-gpios = <&gpio K1_GPIO(80) (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; + no-mmc; + no-sdio; + disable-wp; + cap-sd-highspeed; + vmmc-supply = <&buck4_3v3>; + vqmmc-supply = <&aldo1>; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts index de75f6a..b13a8d6 100644 --- a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts +++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts @@ -13,6 +13,7 @@ compatible = "xunlong,orangepi-r2s", "spacemit,k1"; aliases { + i2c8 = &i2c8; serial0 = &uart0; ethernet0 = ð0; ethernet1 = ð1; @@ -21,6 +22,28 @@ chosen { stdout-path = "serial0"; }; + + vcc4v0: regulator-vcc4v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc4v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio K1_GPIO(126) GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_usb"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&combo_phy { + status = "okay"; }; &emmc { @@ -81,6 +104,130 @@ }; }; +&i2c8 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_cfg>; + status = "okay"; + + pmic@41 { + compatible = "spacemit,p1"; + reg = <0x41>; + interrupts = <64>; + vin1-supply = <&vcc4v0>; + vin2-supply = <&vcc4v0>; + vin3-supply = <&vcc4v0>; + vin4-supply = <&vcc4v0>; + vin5-supply = <&vcc4v0>; + vin6-supply = <&vcc4v0>; + aldoin-supply = <&vcc4v0>; + dldoin1-supply = <&buck5>; + dldoin2-supply = <&buck5>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck3_1v8: buck3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck4_3v3: buck4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck5: buck5 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + aldo1_3v3: aldo1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + aldo2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + aldo3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + aldo4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + dldo2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + dldo5 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + dldo7 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + &pdma { status = "okay"; }; @@ -90,3 +237,13 @@ pinctrl-0 = <&uart0_2_cfg>; status = "okay"; }; + +&usbphy2 { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "host"; + vbus-supply = <&vcc5v0_usb>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts index 7b7331c..7c49bce 100644 --- a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts +++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts @@ -17,12 +17,53 @@ serial0 = &uart0; ethernet0 = ð0; ethernet1 = ð1; + mmc0 = &emmc; + mmc1 = &sdhci0; }; chosen { stdout-path = "serial0"; }; + pcie_vcc3v3: regulator-pcie-vcc3v3 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio K1_GPIO(116) GPIO_ACTIVE_HIGH>; + regulator-name = "pcie_vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v0>; + }; + + vcc_5v0: regulator-vcc-5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc4v0: regulator-vcc4v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc4v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + vin-supply = <&vcc_5v0>; + }; + + vcc5v0_usb30: regulator-vcc5v0-usb30 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio K1_GPIO(123) GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_usb30"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v0>; + }; + leds { compatible = "gpio-leds"; @@ -35,6 +76,20 @@ }; }; +&combo_phy { + status = "okay"; +}; + +&emmc { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + ð0 { phy-handle = <&rgmii0>; phy-mode = "rgmii-id"; @@ -87,8 +142,245 @@ status = "okay"; }; +&i2c8 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_cfg>; + status = "okay"; + + pmic@41 { + compatible = "spacemit,p1"; + reg = <0x41>; + interrupts = <64>; + vin1-supply = <&vcc4v0>; + vin2-supply = <&vcc4v0>; + vin3-supply = <&vcc4v0>; + vin4-supply = <&vcc4v0>; + vin5-supply = <&vcc4v0>; + vin6-supply = <&vcc4v0>; + aldoin-supply = <&vcc4v0>; + dldoin1-supply = <&buck5>; + dldoin2-supply = <&buck5>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck3_1v8: buck3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck4_3v3: buck4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck5: buck5 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + aldo1: aldo1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + aldo2 { + /* not connected */ + }; + + aldo3 { + /* not connected */ + }; + + aldo4 { + /* not connected */ + }; + + dldo1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + dldo2 { + /* not connected */ + }; + + dldo3 { + /* not connected */ + }; + + dldo4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + dldo5 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + dldo7 { + /* not connected */ + }; + }; + }; +}; + +&pcie1_phy { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_3_cfg>; + status = "okay"; +}; + +&pcie1_port { + phys = <&pcie1_phy>; + vpcie3v3-supply = <&pcie_vcc3v3>; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_4_cfg>; + status = "okay"; +}; + +&pcie2_port { + phys = <&pcie2_phy>; + vpcie3v3-supply = <&pcie_vcc3v3>; +}; + +&pcie2 { + status = "okay"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&qspi_cfg>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <26500000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + vcc-supply = <&buck3_1v8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootinfo@0 { + reg = <0x00000 0x010000>; + }; + + private@10000 { + reg = <0x10000 0x010000>; + }; + + fsbl@20000 { + reg = <0x20000 0x040000>; + }; + + env@60000 { + reg = <0x60000 0x010000>; + }; + + opensbi@70000 { + reg = <0x70000 0x030000>; + }; + + uboot@a0000 { + reg = <0xa0000 0x760000>; + }; + }; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_2_cfg>; status = "okay"; }; + +&usbphy2 { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + vbus-supply = <&vcc5v0_usb30>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb5e3,610"; + reg = <0x1>; + peer-hub = <&hub_3_0>; + vdd-supply = <&vcc_5v0>; + }; + + hub_3_0: hub@2 { + compatible = "usb5e3,620"; + reg = <0x2>; + peer-hub = <&hub_2_0>; + vdd-supply = <&vcc_5v0>; + }; +}; + +&sdhci0 { + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&mmc1_cfg>; + pinctrl-1 = <&mmc1_uhs_cfg>; + bus-width = <4>; + cd-gpios = <&gpio K1_GPIO(80) GPIO_ACTIVE_LOW>; + no-mmc; + no-sdio; + disable-wp; + cap-sd-highspeed; + vmmc-supply = <&buck4_3v3>; + vqmmc-supply = <&aldo1>; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi index b13dcb1..4e9a62d 100644 --- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi +++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi @@ -570,4 +570,64 @@ drive-strength = <32>; }; }; + + ssp3_0_cfg: ssp3-0-cfg { + ssp3-0-pins { + pinmux = , /* SCLK */ + , /* MOSI */ + ; /* MISO */ + + bias-disable; + drive-strength = <19>; + power-source = <3300>; + }; + + ssp3-0-frm-pins { + pinmux = ; /* FRM (frame) */ + + bias-pull-up = <0>; + drive-strength = <19>; + power-source = <3300>; + }; + }; + + mmc1_cfg: mmc1-cfg { + mmc1-data-cmd-pins { + pinmux = , /* mmc1_d3 */ + , /* mmc1_d2 */ + , /* mmc1_d1 */ + , /* mmc1_d0 */ + ; /* mmc1_cmd */ + bias-pull-up = <1>; + drive-strength = <19>; + power-source = <3300>; + }; + + mmc1-clk-pins { + pinmux = ; /* mmc1_clk */ + bias-pull-down = <1>; + drive-strength = <19>; + power-source = <3300>; + }; + }; + + mmc1_uhs_cfg: mmc1-uhs-cfg { + mmc1-data-cmd-pins { + pinmux = , /* mmc1_d3 */ + , /* mmc1_d2 */ + , /* mmc1_d1 */ + , /* mmc1_d0 */ + ; /* mmc1_cmd */ + bias-pull-up = <1>; + drive-strength = <42>; + power-source = <1800>; + }; + + mmc1-clk-pins { + pinmux = ; /* mmc1_clk */ + bias-pull-down = <1>; + drive-strength = <42>; + power-source = <1800>; + }; + }; }; diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi index f0bad68..08a0f28 100644 --- a/arch/riscv/boot/dts/spacemit/k1.dtsi +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi @@ -333,12 +333,102 @@ osc_32k: clock-32k { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32768>; clock-output-names = "osc_32k"; #clock-cells = <0>; }; }; + thermal-zones { + soc-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 0>; + + trips { + soc-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + package-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 1>; + + trips { + package-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&thermal 2>; + + trips { + gpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&thermal 3>; + + trips { + cluster0-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster0-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&thermal 4>; + + trips { + cluster1-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster1-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&plic>; @@ -494,6 +584,17 @@ #reset-cells = <1>; }; + thermal: thermal@d4018000 { + compatible = "spacemit,k1-tsensor"; + reg = <0x0 0xd4018000 0x0 0x100>; + clocks = <&syscon_apbc CLK_TSEN>, + <&syscon_apbc CLK_TSEN_BUS>; + clock-names = "core", "bus"; + interrupts = <61>; + resets = <&syscon_apbc RESET_TSEN>; + #thermal-sensor-cells = <1>; + }; + i2c6: i2c@d4018800 { compatible = "spacemit,k1-i2c"; reg = <0x0 0xd4018800 0x0 0x38>; @@ -983,6 +1084,21 @@ status = "disabled"; }; + spi3: spi@d401c000 { + compatible = "spacemit,k1-spi"; + reg = <0x0 0xd401c000 0x0 0x30>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&syscon_apbc CLK_SSP3>, + <&syscon_apbc CLK_SSP3_BUS>; + clock-names = "core", "bus"; + resets = <&syscon_apbc RESET_SSP3>; + interrupts = <55>; + dmas = <&pdma 20>, <&pdma 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + /* sec_uart1: 0xf0612000, not available from Linux */ }; @@ -1199,6 +1315,19 @@ status = "disabled"; }; + sdhci0: mmc@d4280000 { + compatible = "spacemit,k1-sdhci"; + reg = <0x0 0xd4280000 0x0 0x200>; + clocks = <&syscon_apmu CLK_SDH_AXI>, + <&syscon_apmu CLK_SDH0>; + clock-names = "core", "io"; + resets = <&syscon_apmu RESET_SDH_AXI>, + <&syscon_apmu RESET_SDH0>; + reset-names = "axi", "sdh"; + interrupts = <99>; + status = "disabled"; + }; + emmc: mmc@d4281000 { compatible = "spacemit,k1-sdhci"; reg = <0x0 0xd4281000 0x0 0x200>; diff --git a/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts b/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts new file mode 100644 index 0000000..238bb03 --- /dev/null +++ b/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2026 SpacemiT (Hangzhou) Technology Co. Ltd + * Copyright (c) 2026 Yixun Lan + */ + +#include "k3-com260.dtsi" + +/ { + model = "SpacemiT K3 CoM260 IFX"; + compatible = "spacemit,k3-com260-ifx", "spacemit,k3-com260", "spacemit,k3"; + + aliases { + serial0 = &uart0; + ethernet0 = ð1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; diff --git a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi new file mode 100644 index 0000000..a38d7b7 --- /dev/null +++ b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2026 SpacemiT (Hangzhou) Technology Co. Ltd + * Copyright (c) 2026 Yixun Lan + */ +#include + +#include "k3.dtsi" +#include "k3-pinctrl.dtsi" + +/ { + model = "SpacemiT K3 CoM260 Module"; + compatible = "spacemit,k3-com260", "spacemit,k3"; + + memory@100000000 { + device_type = "memory"; + reg = <0x1 0x00000000 0x4 0x00000000>; + }; + + reg_5v_sys: regulator-5v-sys { + compatible = "regulator-fixed"; + regulator-name = "P5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&i2c8 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_cfg>; + status = "okay"; + + pmic@41 { + compatible = "spacemit,p1"; + reg = <0x41>; + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; + vin1-supply = <®_5v_sys>; + vin2-supply = <®_5v_sys>; + vin3-supply = <®_5v_sys>; + vin4-supply = <®_5v_sys>; + vin5-supply = <®_5v_sys>; + vin6-supply = <®_5v_sys>; + aldoin-supply = <®_5v_sys>; + dldoin1-supply = <&buck4>; + dldoin2-supply = <&buck4>; + + regulators { + buck1: buck1 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck2: buck2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck3: buck3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck4: buck4 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck5: buck5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck6: buck6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + aldo1: aldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + aldo3: aldo3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + aldo4: aldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + dldo1: dldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + dldo2: dldo2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + }; + + dldo3: dldo3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + + dldo4: dldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + dldo5: dldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + dldo6: dldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + dldo7: dldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +ð1 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_rgmii_0_cfg>, <&gmac1_phy_0_cfg>; + phy-mode = "rgmii-id"; + phy-handle = <&phy1>; + status = "okay"; + + mdio { + phy1: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&gpio 1 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_0_cfg>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts new file mode 100644 index 0000000..b5d5112 --- /dev/null +++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2026 DeepComputing (HK) Limited + */ + +#include "k3.dtsi" +#include "k3-pinctrl.dtsi" + +/ { + model = "DeepComputing FML13V05"; + compatible = "deepcomputing,fml13v05", "spacemit,k3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0"; + }; + + memory@100000000 { + device_type = "memory"; + reg = <0x1 0x00000000 0x4 0x00000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_0_cfg>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts index 4486dc1..b89c152 100644 --- a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts +++ b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts @@ -26,6 +26,14 @@ reg = <0x1 0x00000000 0x4 0x00000000>; }; + reg_aux_vcc3v3: regulator-aux-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "AUX_VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + reg_aux_vcc5v: regulator-aux-vcc5v { compatible = "regulator-fixed"; regulator-name = "AUX_VCC5V"; @@ -197,3 +205,19 @@ pinctrl-0 = <&uart0_0_cfg>; status = "okay"; }; + +&usb2_host { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub@1 { + compatible = "usb1a40,0101"; + reg = <1>; + vdd-supply = <®_aux_vcc3v3>; + }; +}; + +&usb2_phy { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi index 23899d3..3ee1471 100644 --- a/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi +++ b/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi @@ -45,6 +45,39 @@ }; }; + gmac1_rgmii_0_cfg: gmac1-rgmii-0-cfg { + gmac1-rgmii-0-pins { + pinmux = , /* gmac1_rxdv */ + , /* gmac1 rx d0 */ + , /* gmac1 rx d1 */ + , /* gmac1 rx_clk */ + , /* gmac1 rx d2 */ + , /* gmac1 rx d3 */ + , /* gmac1 tx d0 */ + , /* gmac1 tx d1 */ + , /* gmac1 tx clk */ + , /* gmac1 tx d2 */ + , /* gmac1 tx d3 */ + , /* gmac1 tx_en */ + , /* gmac1 mdc */ + ; /* gmac1 mdio */ + + bias-disable; + drive-strength = <25>; + power-source = <1800>; + }; + }; + + gmac1_phy_0_cfg: gmac1-phy-0-cfg { + gmac1-phy-0-pins { + pinmux = ; /* gmac1 int */ + + bias-disable; + drive-strength = <25>; + power-source = <1800>; + }; + }; + /omit-if-no-ref/ i2c8_cfg: i2c8-cfg { i2c8-pins { @@ -57,6 +90,596 @@ }; /omit-if-no-ref/ + pwm0_0_cfg: pwm0-0-cfg { + pwm0-0-pins { + pinmux = ; /* pwm0 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm0_1_cfg: pwm0-1-cfg { + pwm0-1-pins { + pinmux = ; /* pwm0 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm1_0_cfg: pwm1-0-cfg { + pwm1-0-pins { + pinmux = ; /* pwm1 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm1_1_cfg: pwm1-1-cfg { + pwm1-1-pins { + pinmux = ; /* pwm1 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm1_2_cfg: pwm1-2-cfg { + pwm1-2-pins { + pinmux = ; /* pwm1 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm2_0_cfg: pwm2-0-cfg { + pwm2-0-pins { + pinmux = ; /* pwm2 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm2_1_cfg: pwm2-1-cfg { + pwm2-1-pins { + pinmux = ; /* pwm2 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm2_2_cfg: pwm2-2-cfg { + pwm2-2-pins { + pinmux = ; /* pwm2 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm2_3_cfg: pwm2-3-cfg { + pwm2-3-pins { + pinmux = ; /* pwm2 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm3_0_cfg: pwm3-0-cfg { + pwm3-0-pins { + pinmux = ; /* pwm3 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm3_1_cfg: pwm3-1-cfg { + pwm3-1-pins { + pinmux = ; /* pwm3 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm3_2_cfg: pwm3-2-cfg { + pwm3-2-pins { + pinmux = ; /* pwm3 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm3_3_cfg: pwm3-3-cfg { + pwm3-3-pins { + pinmux = ; /* pwm3 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm4_0_cfg: pwm4-0-cfg { + pwm4-0-pins { + pinmux = ; /* pwm4 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm4_1_cfg: pwm4-1-cfg { + pwm4-1-pins { + pinmux = ; /* pwm4 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm4_2_cfg: pwm4-2-cfg { + pwm4-2-pins { + pinmux = ; /* pwm4 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm5_0_cfg: pwm5-0-cfg { + pwm5-0-pins { + pinmux = ; /* pwm5 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm5_1_cfg: pwm5-1-cfg { + pwm5-1-pins { + pinmux = ; /* pwm5 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm5_2_cfg: pwm5-2-cfg { + pwm5-2-pins { + pinmux = ; /* pwm5 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm6_0_cfg: pwm6-0-cfg { + pwm6-0-pins { + pinmux = ; /* pwm6 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm6_1_cfg: pwm6-1-cfg { + pwm6-1-pins { + pinmux = ; /* pwm6 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm6_2_cfg: pwm6-2-cfg { + pwm6-2-pins { + pinmux = ; /* pwm6 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm7_0_cfg: pwm7-0-cfg { + pwm7-0-pins { + pinmux = ; /* pwm7 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm7_1_cfg: pwm7-1-cfg { + pwm7-1-pins { + pinmux = ; /* pwm7 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm7_2_cfg: pwm7-2-cfg { + pwm7-2-pins { + pinmux = ; /* pwm7 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm8_0_cfg: pwm8-0-cfg { + pwm8-0-pins { + pinmux = ; /* pwm8 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm8_1_cfg: pwm8-1-cfg { + pwm8-1-pins { + pinmux = ; /* pwm8 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm8_2_cfg: pwm8-2-cfg { + pwm8-2-pins { + pinmux = ; /* pwm8 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm9_0_cfg: pwm9-0-cfg { + pwm9-0-pins { + pinmux = ; /* pwm9 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm9_1_cfg: pwm9-1-cfg { + pwm9-1-pins { + pinmux = ; /* pwm9 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm9_2_cfg: pwm9-2-cfg { + pwm9-2-pins { + pinmux = ; /* pwm9 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm10_0_cfg: pwm10-0-cfg { + pwm10-0-pins { + pinmux = ; /* pwm10 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm10_1_cfg: pwm10-1-cfg { + pwm10-1-pins { + pinmux = ; /* pwm10 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm10_2_cfg: pwm10-2-cfg { + pwm10-2-pins { + pinmux = ; /* pwm10 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm11_0_cfg: pwm11-0-cfg { + pwm11-0-pins { + pinmux = ; /* pwm11 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm11_1_cfg: pwm11-1-cfg { + pwm11-1-pins { + pinmux = ; /* pwm11 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm12_0_cfg: pwm12-0-cfg { + pwm12-0-pins { + pinmux = ; /* pwm12 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm12_1_cfg: pwm12-1-cfg { + pwm12-1-pins { + pinmux = ; /* pwm12 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm13_0_cfg: pwm13-0-cfg { + pwm13-0-pins { + pinmux = ; /* pwm13 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm13_1_cfg: pwm13-1-cfg { + pwm13-1-pins { + pinmux = ; /* pwm13 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm13_2_cfg: pwm13-2-cfg { + pwm13-2-pins { + pinmux = ; /* pwm13 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm14_0_cfg: pwm14-0-cfg { + pwm14-0-pins { + pinmux = ; /* pwm14 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm14_1_cfg: pwm14-1-cfg { + pwm14-1-pins { + pinmux = ; /* pwm14 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm14_2_cfg: pwm14-2-cfg { + pwm14-2-pins { + pinmux = ; /* pwm14 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm15_0_cfg: pwm15-0-cfg { + pwm15-0-pins { + pinmux = ; /* pwm15 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm15_1_cfg: pwm15-1-cfg { + pwm15-1-pins { + pinmux = ; /* pwm15 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm15_2_cfg: pwm15-2-cfg { + pwm15-2-pins { + pinmux = ; /* pwm15 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm16_0_cfg: pwm16-0-cfg { + pwm16-0-pins { + pinmux = ; /* pwm16 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm16_1_cfg: pwm16-1-cfg { + pwm16-1-pins { + pinmux = ; /* pwm16 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm16_2_cfg: pwm16-2-cfg { + pwm16-2-pins { + pinmux = ; /* pwm16 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm17_0_cfg: pwm17-0-cfg { + pwm17-0-pins { + pinmux = ; /* pwm17 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm17_1_cfg: pwm17-1-cfg { + pwm17-1-pins { + pinmux = ; /* pwm17 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm17_2_cfg: pwm17-2-cfg { + pwm17-2-pins { + pinmux = ; /* pwm17 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm18_0_cfg: pwm18-0-cfg { + pwm18-0-pins { + pinmux = ; /* pwm18 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm18_1_cfg: pwm18-1-cfg { + pwm18-1-pins { + pinmux = ; /* pwm18 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm18_2_cfg: pwm18-2-cfg { + pwm18-2-pins { + pinmux = ; /* pwm18 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm19_0_cfg: pwm19-0-cfg { + pwm19-0-pins { + pinmux = ; /* pwm19 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm19_1_cfg: pwm19-1-cfg { + pwm19-1-pins { + pinmux = ; /* pwm19 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ + pwm19_2_cfg: pwm19-2-cfg { + pwm19-2-pins { + pinmux = ; /* pwm19 */ + + bias-pull-up = <0>; + drive-strength = <25>; + }; + }; + + /omit-if-no-ref/ uart0_0_cfg: uart0-0-cfg { uart0-0-pins { pinmux = , /* uart0 tx */ diff --git a/arch/riscv/boot/dts/spacemit/k3.dtsi b/arch/riscv/boot/dts/spacemit/k3.dtsi index 815debd..19fc9b4 100644 --- a/arch/riscv/boot/dts/spacemit/k3.dtsi +++ b/arch/riscv/boot/dts/spacemit/k3.dtsi @@ -36,7 +36,7 @@ "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zcmop", "zfa", "zfbfmin", "zfh", "zfhmin", "zicbom", "zicbop", "zicboz", - "ziccamoa", "ziccif", "zicclsm", "zicntr", + "ziccamoa", "ziccif", "zicclsm", "ziccrse", "zicntr", "zicond", "zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zimop", "zkt", "zvbb", "zvbc", "zvfbfmin", "zvfbfwma", "zvfh", @@ -77,7 +77,7 @@ "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zcmop", "zfa", "zfbfmin", "zfh", "zfhmin", "zicbom", "zicbop", "zicboz", - "ziccamoa", "ziccif", "zicclsm", "zicntr", + "ziccamoa", "ziccif", "zicclsm", "ziccrse", "zicntr", "zicond", "zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zimop", "zkt", "zvbb", "zvbc", "zvfbfmin", "zvfbfwma", "zvfh", @@ -118,7 +118,7 @@ "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zcmop", "zfa", "zfbfmin", "zfh", "zfhmin", "zicbom", "zicbop", "zicboz", - "ziccamoa", "ziccif", "zicclsm", "zicntr", + "ziccamoa", "ziccif", "zicclsm", "ziccrse", "zicntr", "zicond", "zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zimop", "zkt", "zvbb", "zvbc", "zvfbfmin", "zvfbfwma", "zvfh", @@ -159,7 +159,7 @@ "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zcmop", "zfa", "zfbfmin", "zfh", "zfhmin", "zicbom", "zicbop", "zicboz", - "ziccamoa", "ziccif", "zicclsm", "zicntr", + "ziccamoa", "ziccif", "zicclsm", "ziccrse", "zicntr", "zicond", "zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zimop", "zkt", "zvbb", "zvbc", "zvfbfmin", "zvfbfwma", "zvfh", @@ -200,7 +200,7 @@ "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zcmop", "zfa", "zfbfmin", "zfh", "zfhmin", "zicbom", "zicbop", "zicboz", - "ziccamoa", "ziccif", "zicclsm", "zicntr", + "ziccamoa", "ziccif", "zicclsm", "ziccrse", "zicntr", "zicond", "zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zimop", "zkt", "zvbb", "zvbc", "zvfbfmin", "zvfbfwma", "zvfh", @@ -241,7 +241,7 @@ "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zcmop", "zfa", "zfbfmin", "zfh", "zfhmin", "zicbom", "zicbop", "zicboz", - "ziccamoa", "ziccif", "zicclsm", "zicntr", + "ziccamoa", "ziccif", "zicclsm", "ziccrse", "zicntr", "zicond", "zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zimop", "zkt", "zvbb", "zvbc", "zvfbfmin", "zvfbfwma", "zvfh", @@ -282,7 +282,7 @@ "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zcmop", "zfa", "zfbfmin", "zfh", "zfhmin", "zicbom", "zicbop", "zicboz", - "ziccamoa", "ziccif", "zicclsm", "zicntr", + "ziccamoa", "ziccif", "zicclsm", "ziccrse", "zicntr", "zicond", "zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zimop", "zkt", "zvbb", "zvbc", "zvfbfmin", "zvfbfwma", "zvfh", @@ -323,7 +323,7 @@ "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zcmop", "zfa", "zfbfmin", "zfh", "zfhmin", "zicbom", "zicbop", "zicboz", - "ziccamoa", "ziccif", "zicclsm", "zicntr", + "ziccamoa", "ziccif", "zicclsm", "ziccrse", "zicntr", "zicond", "zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zimop", "zkt", "zvbb", "zvbc", "zvfbfmin", "zvfbfwma", "zvfh", @@ -424,7 +424,7 @@ osc_32k: clock-32k { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32768>; clock-output-names = "osc_32k"; #clock-cells = <0>; }; @@ -438,6 +438,37 @@ dma-noncoherent; ranges; + usb2_host: usb@c0a00000 { + compatible = "spacemit,k3-dwc3"; + reg = <0x0 0xc0a00000 0x0 0x10000>; + clocks = <&syscon_apmu CLK_APMU_USB2_BUS>; + clock-names = "usbdrd30"; + resets = <&syscon_apmu RESET_APMU_USB2_AHB>, + <&syscon_apmu RESET_APMU_USB2_VCC>, + <&syscon_apmu RESET_APMU_USB2_PHY>; + reset-names = "ahb", "vcc", "phy"; + interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&saplic>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + phy_type = "utmi"; + snps,dis_enblslpm_quirk; + snps,dis_u2_susphy_quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + dr_mode = "host"; + maximum-speed = "high-speed"; + status = "disabled"; + }; + + usb2_phy: phy@c0a20000 { + compatible = "spacemit,k3-usb2-phy"; + reg = <0x0 0xc0a20000 0x0 0x200>; + clocks = <&syscon_apmu CLK_APMU_USB2_BUS>; + #phy-cells = <0>; + status = "disabled"; + }; + eth0: ethernet@cac80000 { compatible = "spacemit,k3-dwmac", "snps,dwmac-5.40a"; reg = <0x0 0xcac80000 0x0 0x2000>; @@ -555,6 +586,17 @@ }; }; + pdma: dma-controller@d4000000 { + compatible = "spacemit,k3-pdma"; + reg = <0x0 0xd4000000 0x0 0x4000>; + clocks = <&syscon_apmu CLK_APMU_DMA>; + resets = <&syscon_apmu RESET_APMU_DMA>; + interrupts = <72 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <16>; + #dma-cells = <1>; + status = "disabled"; + }; + i2c0: i2c@d4010800 { compatible = "spacemit,k3-i2c", "spacemit,k1-i2c"; reg = <0x0 0xd4010800 0x0 0x38>; @@ -797,12 +839,233 @@ status = "disabled"; }; + pwm0: pwm@d401a000 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401a000 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM0>, + <&syscon_apbc CLK_APBC_PWM0_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM0>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@d401a400 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401a400 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM1>, + <&syscon_apbc CLK_APBC_PWM1_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM1>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@d401a800 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401a800 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM2>, + <&syscon_apbc CLK_APBC_PWM2_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM2>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@d401ac00 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401ac00 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM3>, + <&syscon_apbc CLK_APBC_PWM3_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM3>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm4: pwm@d401b000 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401b000 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM4>, + <&syscon_apbc CLK_APBC_PWM4_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM4>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@d401b400 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401b400 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM5>, + <&syscon_apbc CLK_APBC_PWM5_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM5>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@d401b800 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401b800 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM6>, + <&syscon_apbc CLK_APBC_PWM6_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM6>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@d401bc00 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401bc00 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM7>, + <&syscon_apbc CLK_APBC_PWM7_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM7>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm8: pwm@d4020000 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4020000 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM8>, + <&syscon_apbc CLK_APBC_PWM8_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM8>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm9: pwm@d4020400 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4020400 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM9>, + <&syscon_apbc CLK_APBC_PWM9_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM9>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm10: pwm@d4020800 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4020800 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM10>, + <&syscon_apbc CLK_APBC_PWM10_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm11: pwm@d4020c00 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4020c00 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM11>, + <&syscon_apbc CLK_APBC_PWM11_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM11>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm12: pwm@d4021000 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4021000 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM12>, + <&syscon_apbc CLK_APBC_PWM12_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM12>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm13: pwm@d4021400 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4021400 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM13>, + <&syscon_apbc CLK_APBC_PWM13_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM13>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm14: pwm@d4021800 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4021800 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM14>, + <&syscon_apbc CLK_APBC_PWM14_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM14>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm15: pwm@d4021c00 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4021c00 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM15>, + <&syscon_apbc CLK_APBC_PWM15_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM15>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm16: pwm@d4022000 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4022000 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM16>, + <&syscon_apbc CLK_APBC_PWM16_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM16>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm17: pwm@d4022400 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4022400 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM17>, + <&syscon_apbc CLK_APBC_PWM17_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM17>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm18: pwm@d4022800 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4022800 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM18>, + <&syscon_apbc CLK_APBC_PWM18_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM18>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm19: pwm@d4022c00 { + compatible = "spacemit,k3-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4022c00 0x0 0x10>; + clocks = <&syscon_apbc CLK_APBC_PWM19>, + <&syscon_apbc CLK_APBC_PWM19_BUS>; + clock-names = "func", "bus"; + resets = <&syscon_apbc RESET_APBC_PWM19>; + #pwm-cells = <3>; + status = "disabled"; + }; + pinctrl: pinctrl@d401e000 { compatible = "spacemit,k3-pinctrl"; reg = <0x0 0xd401e000 0x0 0x1000>; clocks = <&syscon_apbc CLK_APBC_AIB>, <&syscon_apbc CLK_APBC_AIB_BUS>; clock-names = "func", "bus"; + spacemit,apbc = <&syscon_apbc>; }; uart10: serial@d401f000 { diff --git a/arch/riscv/boot/dts/tenstorrent/blackhole.dtsi b/arch/riscv/boot/dts/tenstorrent/blackhole.dtsi index 6408810..5f709e4 100644 --- a/arch/riscv/boot/dts/tenstorrent/blackhole.dtsi +++ b/arch/riscv/boot/dts/tenstorrent/blackhole.dtsi @@ -77,6 +77,54 @@ }; }; + pmu { + compatible = "riscv,pmu"; + riscv,event-to-mhpmevent = + /* SBI_PMU_HW_CPU_CYCLES -> CPU cycles */ + <0x00001 0x00000000 0x0001>, + /* SBI_PMU_HW_INSTRUCTIONS -> Instructions executed */ + <0x00002 0x00000000 0x0004>, + /* SBI_PMU_HW_CACHE_REFERENCES -> I-cache/ITIM busy | D-cache/DTIM busy */ + <0x00003 0x00000000 0x1801>, + /* SBI_PMU_HW_CACHE_MISSES -> I-cache miss | D-cache miss */ + <0x00004 0x00000000 0x0302>, + /* SBI_PMU_HW_BRANCH_INSTRUCTIONS -> Conditional branch retired */ + <0x00005 0x00000000 0x4000>, + /* + * SBI_PMU_HW_BRANCH_MISSES -> + * Branch direction misprediction | Branch/jump target misprediction + */ + <0x00006 0x00000000 0x6001>, + /* L1D_READ_MISS -> Data cache miss or MMIO access */ + <0x10001 0x00000000 0x0202>, + /* L1D_WRITE_ACCESS -> Data cache write-back */ + <0x10002 0x00000000 0x0402>, + /* L1I_READ_MISS -> Instruction cache miss */ + <0x10009 0x00000000 0x0102>, + /* LL_READ_MISS -> UTLB miss */ + <0x10011 0x00000000 0x2002>, + /* DTLB_READ_MISS -> Data TLB miss */ + <0x10019 0x00000000 0x1002>, + /* ITLB_READ_MISS -> Instruction TLB miss */ + <0x10021 0x00000000 0x0802>; + riscv,event-to-mhpmcounters = + <0x00001 0x00001 0x01>, + <0x00002 0x00002 0x04>, + <0x00003 0x00006 0x78>, + <0x10001 0x10002 0x78>, + <0x10009 0x10009 0x78>, + <0x10011 0x10011 0x78>, + <0x10019 0x10019 0x78>, + <0x10021 0x10021 0x78>; + riscv,raw-event-to-mhpmcounters = + /* Class 0: Instruction Commit Events, bits 8-25 variant */ + <0x0 0x0 0xffffffff 0xfc0000ff 0x78>, + /* Class 1: Microarchitectural Events, bits 8-18 variant */ + <0x0 0x1 0xffffffff 0xfff800ff 0x78>, + /* Class 2: Memory System Events, bits 8-13 variant */ + <0x0 0x2 0xffffffff 0xffffc0ff 0x78>; + }; + soc { #address-cells = <2>; #size-cells = <2>; diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts index 91f3f9b..e16484a 100644 --- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts +++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts @@ -86,6 +86,11 @@ }; }; }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; /* WL-REG-ON */ + }; }; &osc { @@ -239,6 +244,28 @@ slew-rate = <0>; }; }; + + wifi_pins: wifi-0 { + host-wake-pins { + pins = "GPIO2_25"; + function = "gpio"; + bias-disable; + drive-strength = <1>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + reg-on-pins { + pins = "GPIO2_31"; + function = "gpio"; + bias-disable; + drive-strength = <3>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; }; &sdio0 { @@ -247,6 +274,27 @@ status = "okay"; }; +&sdio1 { + bus-width = <4>; + max-frequency = <198000000>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins>; + #address-cells = <1>; + #size-cells = <0>; + non-removable; + keep-power-in-suspend; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + wifi@1 { + compatible = "cypress,cyw43012-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wake"; + }; +}; + &dpu { status = "okay"; }; diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts index 7cb7d28..af6f25e 100644 --- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts +++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts @@ -4,6 +4,7 @@ */ #include "th1520-lichee-module-4a.dtsi" +#include / { model = "Sipeed Lichee Pi 4A"; @@ -40,6 +41,12 @@ }; }; + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&ioexp2 4 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; + }; + thermal-zones { cpu-thermal { polling-delay = <1000>; @@ -96,6 +103,20 @@ }; +&padctrl1_apsys { + i2c1_pins: i2c1-0 { + i2c-pins { + pins = "I2C1_SCL", "I2C1_SDA"; + function = "i2c"; + bias-pull-up = <2100>; + drive-strength = <7>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; +}; + &padctrl0_apsys { fan_pins: fan-0 { pwm1-pins { @@ -132,6 +153,32 @@ }; }; +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + ioexp2: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&sdio1 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + max-frequency = <198000000>; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + status = "okay"; +}; + &dpu { status = "okay"; }; diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi index 5e91dc1..94932c5 100644 --- a/arch/riscv/boot/dts/thead/th1520.dtsi +++ b/arch/riscv/boot/dts/thead/th1520.dtsi @@ -411,6 +411,17 @@ status = "disabled"; }; + i2c1: i2c@ffe7f24000 { + compatible = "thead,th1520-i2c", "snps,designware-i2c"; + reg = <0xff 0xe7f24000 0x0 0x4000>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_I2C1>, <&clk CLK_PERI_APB_PCLK>; + clock-names = "ref", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gpio@ffe7f34000 { compatible = "snps,dw-apb-gpio"; reg = <0xff 0xe7f34000 0x0 0x1000>; diff --git a/include/dt-bindings/clock/qcom,ipq9650-gcc.h b/include/dt-bindings/clock/qcom,ipq9650-gcc.h new file mode 100644 index 0000000..afd17c0 --- /dev/null +++ b/include/dt-bindings/clock/qcom,ipq9650-gcc.h @@ -0,0 +1,172 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_IPQ9650_H +#define _DT_BINDINGS_CLOCK_IPQ_GCC_IPQ9650_H + +#define GCC_ADSS_PWM_CLK 0 +#define GCC_ADSS_PWM_CLK_SRC 1 +#define GCC_ANOC_PCIE0_1LANE_M_CLK 2 +#define GCC_ANOC_PCIE0_1LANE_S_CLK 3 +#define GCC_ANOC_PCIE1_2LANE_M_CLK 4 +#define GCC_ANOC_PCIE1_2LANE_S_CLK 5 +#define GCC_ANOC_PCIE2_2LANE_M_CLK 6 +#define GCC_ANOC_PCIE2_2LANE_S_CLK 7 +#define GCC_ANOC_PCIE3_2LANE_M_CLK 8 +#define GCC_ANOC_PCIE3_2LANE_S_CLK 9 +#define GCC_ANOC_PCIE4_1LANE_M_CLK 10 +#define GCC_ANOC_PCIE4_1LANE_S_CLK 11 +#define GCC_CMN_12GPLL_AHB_CLK 12 +#define GCC_CMN_12GPLL_APU_CLK 13 +#define GCC_CMN_12GPLL_SYS_CLK 14 +#define GCC_CMN_LDO_CLK 15 +#define GCC_MDIO_AHB_CLK 16 +#define GCC_NSSCC_CLK 17 +#define GCC_NSSCFG_CLK 18 +#define GCC_NSSNOC_ATB_CLK 19 +#define GCC_NSSNOC_MEMNOC_1_CLK 20 +#define GCC_NSSNOC_MEMNOC_BFDCD_CLK_SRC 21 +#define GCC_NSSNOC_MEMNOC_CLK 22 +#define GCC_NSSNOC_MEMNOC_DIV_CLK_SRC 23 +#define GCC_NSSNOC_NSSCC_CLK 24 +#define GCC_NSSNOC_PCNOC_1_CLK 25 +#define GCC_NSSNOC_QOSGEN_REF_CLK 26 +#define GCC_NSSNOC_SNOC_1_CLK 27 +#define GCC_NSSNOC_SNOC_CLK 28 +#define GCC_NSSNOC_TIMEOUT_REF_CLK 29 +#define GCC_NSSNOC_XO_DCD_CLK 30 +#define GCC_NSS_TS_CLK 31 +#define GCC_NSS_TS_CLK_SRC 32 +#define GCC_PCIE0_AHB_CLK 33 +#define GCC_PCIE0_AUX_CLK 34 +#define GCC_PCIE0_AXI_M_CLK 35 +#define GCC_PCIE0_AXI_M_CLK_SRC 36 +#define GCC_PCIE0_AXI_S_BRIDGE_CLK 37 +#define GCC_PCIE0_AXI_S_CLK 38 +#define GCC_PCIE0_AXI_S_CLK_SRC 39 +#define GCC_PCIE0_PIPE_CLK 40 +#define GCC_PCIE0_PIPE_CLK_SRC 41 +#define GCC_PCIE0_RCHNG_CLK 42 +#define GCC_PCIE0_RCHNG_CLK_SRC 43 +#define GCC_PCIE1_AHB_CLK 44 +#define GCC_PCIE1_AUX_CLK 45 +#define GCC_PCIE1_AXI_M_CLK 46 +#define GCC_PCIE1_AXI_M_CLK_SRC 47 +#define GCC_PCIE1_AXI_S_BRIDGE_CLK 48 +#define GCC_PCIE1_AXI_S_CLK 49 +#define GCC_PCIE1_AXI_S_CLK_SRC 50 +#define GCC_PCIE1_PIPE_CLK 51 +#define GCC_PCIE1_PIPE_CLK_SRC 52 +#define GCC_PCIE1_RCHNG_CLK 53 +#define GCC_PCIE1_RCHNG_CLK_SRC 54 +#define GCC_PCIE2_AHB_CLK 55 +#define GCC_PCIE2_AUX_CLK 56 +#define GCC_PCIE2_AXI_M_CLK 57 +#define GCC_PCIE2_AXI_M_CLK_SRC 58 +#define GCC_PCIE2_AXI_S_BRIDGE_CLK 59 +#define GCC_PCIE2_AXI_S_CLK 60 +#define GCC_PCIE2_AXI_S_CLK_SRC 61 +#define GCC_PCIE2_PIPE_CLK 62 +#define GCC_PCIE2_PIPE_CLK_SRC 63 +#define GCC_PCIE2_RCHNG_CLK 64 +#define GCC_PCIE2_RCHNG_CLK_SRC 65 +#define GCC_PCIE3_AHB_CLK 66 +#define GCC_PCIE3_AUX_CLK 67 +#define GCC_PCIE3_AXI_M_CLK 68 +#define GCC_PCIE3_AXI_M_CLK_SRC 69 +#define GCC_PCIE3_AXI_S_BRIDGE_CLK 70 +#define GCC_PCIE3_AXI_S_CLK 71 +#define GCC_PCIE3_AXI_S_CLK_SRC 72 +#define GCC_PCIE3_PIPE_CLK 73 +#define GCC_PCIE3_PIPE_CLK_SRC 74 +#define GCC_PCIE3_RCHNG_CLK 75 +#define GCC_PCIE3_RCHNG_CLK_SRC 76 +#define GCC_PCIE4_AHB_CLK 77 +#define GCC_PCIE4_AUX_CLK 78 +#define GCC_PCIE4_AXI_M_CLK 79 +#define GCC_PCIE4_AXI_M_CLK_SRC 80 +#define GCC_PCIE4_AXI_S_BRIDGE_CLK 81 +#define GCC_PCIE4_AXI_S_CLK 82 +#define GCC_PCIE4_AXI_S_CLK_SRC 83 +#define GCC_PCIE4_PIPE_CLK 84 +#define GCC_PCIE4_PIPE_CLK_SRC 85 +#define GCC_PCIE4_RCHNG_CLK 86 +#define GCC_PCIE4_RCHNG_CLK_SRC 87 +#define GCC_PCIE_AUX_CLK_SRC 88 +#define GCC_PCNOC_BFDCD_CLK_SRC 89 +#define GCC_QDSS_AT_CLK 90 +#define GCC_QDSS_AT_CLK_SRC 91 +#define GCC_QDSS_DAP_CLK 92 +#define GCC_QDSS_TSCTR_CLK_SRC 93 +#define GCC_QPIC_AHB_CLK 94 +#define GCC_QPIC_CLK 95 +#define GCC_QPIC_CLK_SRC 96 +#define GCC_QPIC_IO_MACRO_CLK 97 +#define GCC_QPIC_IO_MACRO_CLK_SRC 98 +#define GCC_QPIC_SLEEP_CLK 99 +#define GCC_QUPV3_2X_CORE_CLK 100 +#define GCC_QUPV3_2X_CORE_CLK_SRC 101 +#define GCC_QUPV3_AHB_MST_CLK 102 +#define GCC_QUPV3_AHB_SLV_CLK 103 +#define GCC_QUPV3_CORE_CLK 104 +#define GCC_QUPV3_SLEEP_CLK 105 +#define GCC_QUPV3_WRAP_SE0_CLK 106 +#define GCC_QUPV3_WRAP_SE0_CLK_SRC 107 +#define GCC_QUPV3_WRAP_SE1_CLK 108 +#define GCC_QUPV3_WRAP_SE1_CLK_SRC 109 +#define GCC_QUPV3_WRAP_SE2_CLK 110 +#define GCC_QUPV3_WRAP_SE2_CLK_SRC 111 +#define GCC_QUPV3_WRAP_SE3_CLK 112 +#define GCC_QUPV3_WRAP_SE3_CLK_SRC 113 +#define GCC_QUPV3_WRAP_SE4_CLK 114 +#define GCC_QUPV3_WRAP_SE4_CLK_SRC 115 +#define GCC_QUPV3_WRAP_SE5_CLK 116 +#define GCC_QUPV3_WRAP_SE5_CLK_SRC 117 +#define GCC_QUPV3_WRAP_SE6_CLK 118 +#define GCC_QUPV3_WRAP_SE6_CLK_SRC 119 +#define GCC_QUPV3_WRAP_SE7_CLK 120 +#define GCC_QUPV3_WRAP_SE7_CLK_SRC 121 +#define GCC_SDCC1_AHB_CLK 122 +#define GCC_SDCC1_APPS_CLK 123 +#define GCC_SDCC1_APPS_CLK_SRC 124 +#define GCC_SDCC1_ICE_CORE_CLK 125 +#define GCC_SDCC1_ICE_CORE_CLK_SRC 126 +#define GCC_SLEEP_CLK_SRC 127 +#define GCC_SNOC_USB_CLK 128 +#define GCC_SYSTEM_NOC_BFDCD_CLK_SRC 129 +#define GCC_TLMM_AHB_CLK 130 +#define GCC_TLMM_CLK 131 +#define GCC_UNIPHY0_AHB_CLK 132 +#define GCC_UNIPHY0_SYS_CLK 133 +#define GCC_UNIPHY1_AHB_CLK 134 +#define GCC_UNIPHY1_SYS_CLK 135 +#define GCC_UNIPHY2_AHB_CLK 136 +#define GCC_UNIPHY2_SYS_CLK 137 +#define GCC_UNIPHY_SYS_CLK_SRC 138 +#define GCC_USB0_AUX_CLK 139 +#define GCC_USB0_AUX_CLK_SRC 140 +#define GCC_USB0_EUD_AT_CLK 141 +#define GCC_USB0_MASTER_CLK 142 +#define GCC_USB0_MASTER_CLK_SRC 143 +#define GCC_USB0_MOCK_UTMI_CLK 144 +#define GCC_USB0_MOCK_UTMI_CLK_SRC 145 +#define GCC_USB0_MOCK_UTMI_DIV_CLK_SRC 146 +#define GCC_USB0_PHY_CFG_AHB_CLK 147 +#define GCC_USB0_PIPE_CLK 148 +#define GCC_USB0_PIPE_CLK_SRC 149 +#define GCC_USB0_SLEEP_CLK 150 +#define GCC_USB1_MASTER_CLK 151 +#define GCC_USB1_MOCK_UTMI_CLK 152 +#define GCC_USB1_MOCK_UTMI_CLK_SRC 153 +#define GCC_USB1_MOCK_UTMI_DIV_CLK_SRC 154 +#define GCC_USB1_PHY_CFG_AHB_CLK 155 +#define GCC_USB1_SLEEP_CLK 156 +#define GCC_XO_CLK_SRC 157 +#define GPLL0 158 +#define GPLL0_MAIN 159 +#define GPLL2 160 +#define GPLL2_OUT_MAIN 161 +#define GPLL4 162 +#endif diff --git a/include/dt-bindings/clock/r8a73a4-clock.h b/include/dt-bindings/clock/r8a73a4-clock.h index 655440a..028ecef 100644 --- a/include/dt-bindings/clock/r8a73a4-clock.h +++ b/include/dt-bindings/clock/r8a73a4-clock.h @@ -23,6 +23,8 @@ #define R8A73A4_CLK_ZX 13 #define R8A73A4_CLK_ZS 14 #define R8A73A4_CLK_HP 15 +#define R8A73A4_CLK_ZTR 16 +#define R8A73A4_CLK_ZT 17 /* MSTP1 */ #define R8A73A4_CLK_TMU0 25 diff --git a/include/dt-bindings/clock/r8a7740-clock.h b/include/dt-bindings/clock/r8a7740-clock.h index 1b3fdb3..8a8816b 100644 --- a/include/dt-bindings/clock/r8a7740-clock.h +++ b/include/dt-bindings/clock/r8a7740-clock.h @@ -24,6 +24,8 @@ #define R8A7740_CLK_ZB 14 #define R8A7740_CLK_M3 15 #define R8A7740_CLK_CP 16 +#define R8A7740_CLK_ZTR 17 +#define R8A7740_CLK_ZT 18 /* MSTP1 */ #define R8A7740_CLK_CEU21 28 diff --git a/include/dt-bindings/firmware/qcom,scm.h b/include/dt-bindings/firmware/qcom,scm.h index 6de8b08..0d29d8d 100644 --- a/include/dt-bindings/firmware/qcom,scm.h +++ b/include/dt-bindings/firmware/qcom,scm.h @@ -35,5 +35,6 @@ #define QCOM_SCM_VMID_NAV 0x2B #define QCOM_SCM_VMID_TVM 0x2D #define QCOM_SCM_VMID_OEMVM 0x31 +#define QCOM_SCM_VMID_CP_ADSP_SHARED 0x33 #endif diff --git a/include/dt-bindings/memory/tegra114-mc.h b/include/dt-bindings/memory/tegra114-mc.h index dfe99c8..5e0d6a1 100644 --- a/include/dt-bindings/memory/tegra114-mc.h +++ b/include/dt-bindings/memory/tegra114-mc.h @@ -40,4 +40,71 @@ #define TEGRA114_MC_RESET_VDE 14 #define TEGRA114_MC_RESET_VI 15 +#define TEGRA114_MC_PTCR 0 +#define TEGRA114_MC_DISPLAY0A 1 +#define TEGRA114_MC_DISPLAY0AB 2 +#define TEGRA114_MC_DISPLAY0B 3 +#define TEGRA114_MC_DISPLAY0BB 4 +#define TEGRA114_MC_DISPLAY0C 5 +#define TEGRA114_MC_DISPLAY0CB 6 +#define TEGRA114_MC_DISPLAY1B 7 +#define TEGRA114_MC_DISPLAY1BB 8 +#define TEGRA114_MC_EPPUP 9 +#define TEGRA114_MC_G2PR 10 +#define TEGRA114_MC_G2SR 11 +#define TEGRA114_MC_MPEUNIFBR 12 +#define TEGRA114_MC_VIRUV 13 +#define TEGRA114_MC_AFIR 14 +#define TEGRA114_MC_AVPCARM7R 15 +#define TEGRA114_MC_DISPLAYHC 16 +#define TEGRA114_MC_DISPLAYHCB 17 +#define TEGRA114_MC_FDCDRD 18 +#define TEGRA114_MC_FDCDRD2 19 +#define TEGRA114_MC_G2DR 20 +#define TEGRA114_MC_HDAR 21 +#define TEGRA114_MC_HOST1XDMAR 22 +#define TEGRA114_MC_HOST1XR 23 +#define TEGRA114_MC_IDXSRD 24 +#define TEGRA114_MC_IDXSRD2 25 +#define TEGRA114_MC_MPE_IPRED 26 +#define TEGRA114_MC_MPEAMEMRD 27 +#define TEGRA114_MC_MPECSRD 28 +#define TEGRA114_MC_PPCSAHBDMAR 29 +#define TEGRA114_MC_PPCSAHBSLVR 30 +#define TEGRA114_MC_SATAR 31 +#define TEGRA114_MC_TEXSRD 32 +#define TEGRA114_MC_TEXSRD2 33 +#define TEGRA114_MC_VDEBSEVR 34 +#define TEGRA114_MC_VDEMBER 35 +#define TEGRA114_MC_VDEMCER 36 +#define TEGRA114_MC_VDETPER 37 +#define TEGRA114_MC_MPCORELPR 38 +#define TEGRA114_MC_MPCORER 39 +#define TEGRA114_MC_EPPU 40 +#define TEGRA114_MC_EPPV 41 +#define TEGRA114_MC_EPPY 42 +#define TEGRA114_MC_MPEUNIFBW 43 +#define TEGRA114_MC_VIWSB 44 +#define TEGRA114_MC_VIWU 45 +#define TEGRA114_MC_VIWV 46 +#define TEGRA114_MC_VIWY 47 +#define TEGRA114_MC_G2DW 48 +#define TEGRA114_MC_AFIW 49 +#define TEGRA114_MC_AVPCARM7W 50 +#define TEGRA114_MC_FDCDWR 51 +#define TEGRA114_MC_FDCDWR2 52 +#define TEGRA114_MC_HDAW 53 +#define TEGRA114_MC_HOST1XW 54 +#define TEGRA114_MC_ISPW 55 +#define TEGRA114_MC_MPCORELPW 56 +#define TEGRA114_MC_MPCOREW 57 +#define TEGRA114_MC_MPECSWR 58 +#define TEGRA114_MC_PPCSAHBDMAW 59 +#define TEGRA114_MC_PPCSAHBSLVW 60 +#define TEGRA114_MC_SATAW 61 +#define TEGRA114_MC_VDEBSEVW 62 +#define TEGRA114_MC_VDEDBGW 63 +#define TEGRA114_MC_VDEMBEW 64 +#define TEGRA114_MC_VDETPMW 65 + #endif diff --git a/include/dt-bindings/pinctrl/renesas,r9a08g046-pinctrl.h b/include/dt-bindings/pinctrl/renesas,r9a08g046-pinctrl.h new file mode 100644 index 0000000..5ec5bfc --- /dev/null +++ b/include/dt-bindings/pinctrl/renesas,r9a08g046-pinctrl.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * This header provides constants for Renesas RZ/G3L family pinctrl bindings. + * + * Copyright (C) 2026 Renesas Electronics Corp. + * + */ + +#ifndef __DT_BINDINGS_PINCTRL_RENESAS_R9A08G046_PINCTRL_H__ +#define __DT_BINDINGS_PINCTRL_RENESAS_R9A08G046_PINCTRL_H__ + +#include + +/* RZG3L_Px = Offset address of PFC_P_mn - 0x22 */ +#define RZG3L_P2 2 +#define RZG3L_P3 3 +#define RZG3L_P5 5 +#define RZG3L_P6 6 +#define RZG3L_P7 7 +#define RZG3L_P8 8 +#define RZG3L_PA 10 +#define RZG3L_PB 11 +#define RZG3L_PC 12 +#define RZG3L_PD 13 +#define RZG3L_PE 14 +#define RZG3L_PF 15 +#define RZG3L_PG 16 +#define RZG3L_PH 17 +#define RZG3L_PJ 19 +#define RZG3L_PK 20 +#define RZG3L_PL 21 +#define RZG3L_PM 22 +#define RZG3L_PS 28 + +#define RZG3L_PORT_PINMUX(b, p, f) RZG2L_PORT_PINMUX(RZG3L_P##b, p, f) +#define RZG3L_GPIO(port, pin) RZG2L_GPIO(RZG3L_P##port, pin) + +#endif /* __DT_BINDINGS_PINCTRL_RENESAS_R9A08G046_PINCTRL_H__ */ diff --git a/include/dt-bindings/reset/qcom,ipq9650-gcc.h b/include/dt-bindings/reset/qcom,ipq9650-gcc.h new file mode 100644 index 0000000..a2cbb11 --- /dev/null +++ b/include/dt-bindings/reset/qcom,ipq9650-gcc.h @@ -0,0 +1,215 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef _DT_BINDINGS_RESET_IPQ_GCC_IPQ9650_H +#define _DT_BINDINGS_RESET_IPQ_GCC_IPQ9650_H + +#define GCC_ADSS_BCR 0 +#define GCC_ADSS_PWM_CLK_ARES 1 +#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 2 +#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_GPLL0_CLK_ARES 3 +#define GCC_APSS_AHB_CLK_ARES 4 +#define GCC_APSS_ATB_CLK_ARES 5 +#define GCC_APSS_AXI_CLK_ARES 6 +#define GCC_APSS_TS_CLK_ARES 7 +#define GCC_BOOT_ROM_AHB_CLK_ARES 8 +#define GCC_BOOT_ROM_BCR 9 +#define GCC_CMN_12GPLL_AHB_CLK_ARES 10 +#define GCC_CMN_12GPLL_APU_CLK_ARES 11 +#define GCC_CMN_12GPLL_SYS_CLK_ARES 12 +#define GCC_CMN_BLK_BCR 13 +#define GCC_CMN_LDO_CLK_ARES 14 +#define GCC_CPUSS_TRIG_CLK_ARES 15 +#define GCC_GP1_CLK_ARES 16 +#define GCC_GP2_CLK_ARES 17 +#define GCC_GP3_CLK_ARES 18 +#define GCC_MDIO_AHB_CLK_ARES 19 +#define GCC_MDIO_BCR 20 +#define GCC_NSSCC_CLK_ARES 21 +#define GCC_NSSCFG_CLK_ARES 22 +#define GCC_NSSNOC_ATB_CLK_ARES 23 +#define GCC_NSSNOC_MEMNOC_1_CLK_ARES 24 +#define GCC_NSSNOC_MEMNOC_CLK_ARES 25 +#define GCC_NSSNOC_NSSCC_CLK_ARES 26 +#define GCC_NSSNOC_PCNOC_1_CLK_ARES 27 +#define GCC_NSSNOC_QOSGEN_REF_CLK_ARES 28 +#define GCC_NSSNOC_SNOC_1_CLK_ARES 29 +#define GCC_NSSNOC_SNOC_CLK_ARES 30 +#define GCC_NSSNOC_TIMEOUT_REF_CLK_ARES 31 +#define GCC_NSSNOC_XO_DCD_CLK_ARES 32 +#define GCC_NSS_BCR 33 +#define GCC_NSS_TS_CLK_ARES 34 +#define GCC_PCIE0PHY_PHY_BCR 35 +#define GCC_PCIE0_AHB_CLK_ARES 36 +#define GCC_PCIE0_AHB_RESET 37 +#define GCC_PCIE0_AUX_CLK_ARES 38 +#define GCC_PCIE0_AUX_RESET 39 +#define GCC_PCIE0_AXI_M_CLK_ARES 40 +#define GCC_PCIE0_AXI_M_RESET 41 +#define GCC_PCIE0_AXI_M_STICKY_RESET 42 +#define GCC_PCIE0_AXI_S_BRIDGE_CLK_ARES 43 +#define GCC_PCIE0_AXI_S_CLK_ARES 44 +#define GCC_PCIE0_AXI_S_RESET 45 +#define GCC_PCIE0_AXI_S_STICKY_RESET 46 +#define GCC_PCIE0_BCR 47 +#define GCC_PCIE0_CORE_STICKY_RESET 48 +#define GCC_PCIE0_LINK_DOWN_BCR 49 +#define GCC_PCIE0_PHY_BCR 50 +#define GCC_PCIE0_PIPE_CLK_ARES 51 +#define GCC_PCIE0_PIPE_RESET 52 +#define GCC_PCIE1PHY_PHY_BCR 53 +#define GCC_PCIE1_AHB_CLK_ARES 54 +#define GCC_PCIE1_AHB_RESET 55 +#define GCC_PCIE1_AUX_CLK_ARES 56 +#define GCC_PCIE1_AUX_RESET 57 +#define GCC_PCIE1_AXI_M_CLK_ARES 58 +#define GCC_PCIE1_AXI_M_RESET 59 +#define GCC_PCIE1_AXI_M_STICKY_RESET 60 +#define GCC_PCIE1_AXI_S_BRIDGE_CLK_ARES 61 +#define GCC_PCIE1_AXI_S_CLK_ARES 62 +#define GCC_PCIE1_AXI_S_RESET 63 +#define GCC_PCIE1_AXI_S_STICKY_RESET 64 +#define GCC_PCIE1_BCR 65 +#define GCC_PCIE1_CORE_STICKY_RESET 66 +#define GCC_PCIE1_LINK_DOWN_BCR 67 +#define GCC_PCIE1_PHY_BCR 68 +#define GCC_PCIE1_PIPE_CLK_ARES 69 +#define GCC_PCIE1_PIPE_RESET 70 +#define GCC_PCIE2PHY_PHY_BCR 71 +#define GCC_PCIE2_AHB_CLK_ARES 72 +#define GCC_PCIE2_AHB_RESET 73 +#define GCC_PCIE2_AUX_CLK_ARES 74 +#define GCC_PCIE2_AUX_RESET 75 +#define GCC_PCIE2_AXI_M_CLK_ARES 76 +#define GCC_PCIE2_AXI_M_RESET 77 +#define GCC_PCIE2_AXI_M_STICKY_RESET 78 +#define GCC_PCIE2_AXI_S_BRIDGE_CLK_ARES 79 +#define GCC_PCIE2_AXI_S_CLK_ARES 80 +#define GCC_PCIE2_AXI_S_RESET 81 +#define GCC_PCIE2_AXI_S_STICKY_RESET 82 +#define GCC_PCIE2_BCR 83 +#define GCC_PCIE2_CORE_STICKY_RESET 84 +#define GCC_PCIE2_LINK_DOWN_BCR 85 +#define GCC_PCIE2_PHY_BCR 86 +#define GCC_PCIE2_PIPE_CLK_ARES 87 +#define GCC_PCIE2_PIPE_RESET 88 +#define GCC_PCIE3PHY_PHY_BCR 89 +#define GCC_PCIE3_AHB_CLK_ARES 90 +#define GCC_PCIE3_AHB_RESET 91 +#define GCC_PCIE3_AUX_CLK_ARES 92 +#define GCC_PCIE3_AUX_RESET 93 +#define GCC_PCIE3_AXI_M_CLK_ARES 94 +#define GCC_PCIE3_AXI_M_RESET 95 +#define GCC_PCIE3_AXI_M_STICKY_RESET 96 +#define GCC_PCIE3_AXI_S_BRIDGE_CLK_ARES 97 +#define GCC_PCIE3_AXI_S_CLK_ARES 98 +#define GCC_PCIE3_AXI_S_RESET 99 +#define GCC_PCIE3_AXI_S_STICKY_RESET 100 +#define GCC_PCIE3_BCR 101 +#define GCC_PCIE3_CORE_STICKY_RESET 102 +#define GCC_PCIE3_LINK_DOWN_BCR 103 +#define GCC_PCIE3_PHY_BCR 104 +#define GCC_PCIE3_PIPE_CLK_ARES 105 +#define GCC_PCIE3_PIPE_RESET 106 +#define GCC_PCIE4PHY_PHY_BCR 107 +#define GCC_PCIE4_AHB_CLK_ARES 108 +#define GCC_PCIE4_AHB_RESET 109 +#define GCC_PCIE4_AUX_CLK_ARES 110 +#define GCC_PCIE4_AUX_RESET 111 +#define GCC_PCIE4_AXI_M_CLK_ARES 112 +#define GCC_PCIE4_AXI_M_RESET 113 +#define GCC_PCIE4_AXI_M_STICKY_RESET 114 +#define GCC_PCIE4_AXI_S_BRIDGE_CLK_ARES 115 +#define GCC_PCIE4_AXI_S_CLK_ARES 116 +#define GCC_PCIE4_AXI_S_RESET 117 +#define GCC_PCIE4_AXI_S_STICKY_RESET 118 +#define GCC_PCIE4_BCR 119 +#define GCC_PCIE4_CORE_STICKY_RESET 120 +#define GCC_PCIE4_LINK_DOWN_BCR 121 +#define GCC_PCIE4_PHY_BCR 122 +#define GCC_PCIE4_PIPE_CLK_ARES 123 +#define GCC_PCIE4_PIPE_RESET 124 +#define GCC_QDSS_APB2JTAG_CLK_ARES 125 +#define GCC_QDSS_AT_CLK_ARES 126 +#define GCC_QDSS_BCR 127 +#define GCC_QDSS_CFG_AHB_CLK_ARES 128 +#define GCC_QDSS_DAP_AHB_CLK_ARES 129 +#define GCC_QDSS_DAP_CLK_ARES 130 +#define GCC_QDSS_ETR_USB_CLK_ARES 131 +#define GCC_QDSS_EUD_AT_CLK_ARES 132 +#define GCC_QDSS_STM_CLK_ARES 133 +#define GCC_QDSS_TRACECLKIN_CLK_ARES 134 +#define GCC_QDSS_TSCTR_DIV16_CLK_ARES 135 +#define GCC_QDSS_TSCTR_DIV2_CLK_ARES 136 +#define GCC_QDSS_TSCTR_DIV3_CLK_ARES 137 +#define GCC_QDSS_TSCTR_DIV4_CLK_ARES 138 +#define GCC_QDSS_TSCTR_DIV8_CLK_ARES 139 +#define GCC_QDSS_TS_CLK_ARES 140 +#define GCC_QPIC_AHB_CLK_ARES 141 +#define GCC_QPIC_BCR 142 +#define GCC_QPIC_CLK_ARES 143 +#define GCC_QPIC_IO_MACRO_CLK_ARES 144 +#define GCC_QPIC_SLEEP_CLK_ARES 145 +#define GCC_QUPV3_2X_CORE_CLK_ARES 146 +#define GCC_QUPV3_AHB_MST_CLK_ARES 147 +#define GCC_QUPV3_AHB_SLV_CLK_ARES 148 +#define GCC_QUPV3_BCR 149 +#define GCC_QUPV3_CORE_CLK_ARES 150 +#define GCC_QUPV3_WRAP_SE0_BCR 151 +#define GCC_QUPV3_WRAP_SE0_CLK_ARES 152 +#define GCC_QUPV3_WRAP_SE1_BCR 153 +#define GCC_QUPV3_WRAP_SE1_CLK_ARES 154 +#define GCC_QUPV3_WRAP_SE2_BCR 155 +#define GCC_QUPV3_WRAP_SE2_CLK_ARES 156 +#define GCC_QUPV3_WRAP_SE3_BCR 157 +#define GCC_QUPV3_WRAP_SE3_CLK_ARES 158 +#define GCC_QUPV3_WRAP_SE4_BCR 159 +#define GCC_QUPV3_WRAP_SE4_CLK_ARES 160 +#define GCC_QUPV3_WRAP_SE5_BCR 161 +#define GCC_QUPV3_WRAP_SE5_CLK_ARES 162 +#define GCC_QUPV3_WRAP_SE6_BCR 163 +#define GCC_QUPV3_WRAP_SE6_CLK_ARES 164 +#define GCC_QUPV3_WRAP_SE7_BCR 165 +#define GCC_QUPV3_WRAP_SE7_CLK_ARES 166 +#define GCC_QUSB2_0_PHY_BCR 167 +#define GCC_QUSB2_1_PHY_BCR 168 +#define GCC_SDCC1_APPS_CLK_ARES 169 +#define GCC_SDCC1_ICE_CORE_CLK_ARES 170 +#define GCC_SDCC_BCR 171 +#define GCC_TLMM_AHB_CLK_ARES 172 +#define GCC_TLMM_BCR 173 +#define GCC_TLMM_CLK_ARES 174 +#define GCC_UNIPHY0_AHB_CLK_ARES 175 +#define GCC_UNIPHY0_BCR 176 +#define GCC_UNIPHY0_PMA_BCR 177 +#define GCC_UNIPHY0_SYS_CLK_ARES 178 +#define GCC_UNIPHY0_XPCS_ARES 179 +#define GCC_UNIPHY1_AHB_CLK_ARES 180 +#define GCC_UNIPHY1_BCR 181 +#define GCC_UNIPHY1_PMA_BCR 182 +#define GCC_UNIPHY1_SYS_CLK_ARES 183 +#define GCC_UNIPHY1_XPCS_ARES 184 +#define GCC_UNIPHY2_AHB_CLK_ARES 185 +#define GCC_UNIPHY2_BCR 186 +#define GCC_UNIPHY2_PMA_BCR 187 +#define GCC_UNIPHY2_SYS_CLK_ARES 188 +#define GCC_UNIPHY2_XPCS_ARES 189 +#define GCC_USB0_AUX_CLK_ARES 190 +#define GCC_USB0_MASTER_CLK_ARES 191 +#define GCC_USB0_MOCK_UTMI_CLK_ARES 192 +#define GCC_USB0_PHY_BCR 193 +#define GCC_USB0_PHY_CFG_AHB_CLK_ARES 194 +#define GCC_USB0_PIPE_CLK_ARES 195 +#define GCC_USB0_SLEEP_CLK_ARES 196 +#define GCC_USB1_BCR 197 +#define GCC_USB1_MASTER_CLK_ARES 198 +#define GCC_USB1_MOCK_UTMI_CLK_ARES 199 +#define GCC_USB1_PHY_CFG_AHB_CLK_ARES 200 +#define GCC_USB1_SLEEP_CLK_ARES 201 +#define GCC_USB3PHY_0_PHY_BCR 202 +#define GCC_USB_BCR 203 +#define GCC_UNIPHY1_XLGPCS_ARES 204 +#define GCC_UNIPHY2_XLGPCS_ARES 205 +#endif diff --git a/include/dt-bindings/soc/renesas,r8a78000-mfis.h b/include/dt-bindings/soc/renesas,r8a78000-mfis.h new file mode 100644 index 0000000..147a8ae --- /dev/null +++ b/include/dt-bindings/soc/renesas,r8a78000-mfis.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +#ifndef _DT_BINDINGS_SOC_RENESAS_R8A78000_MFIS_H +#define _DT_BINDINGS_SOC_RENESAS_R8A78000_MFIS_H + +/* + * Constants for the second mbox-cell of the Renesas MFIS IP core. To be treated + * as bit flags which can be ORed. + */ + +/* + * MFIS HW design before r8a78001 requires a channel to be marked as either + * TX or RX. + */ +#define MFIS_CHANNEL_TX (0 << 0) +#define MFIS_CHANNEL_RX (1 << 0) + +/* + * MFIS variants before r8a78001 work with pairs of IICR and EICR registers. + * Usually, it is specified in the datasheets which of the two a specific core + * should use. Then, it does not need extra description in DT. For plain MFIS + * of r8a78000, this is selectable, though. According to the system design and + * the firmware in use, these channels need to be marked. This is not needed + * with other versions of the MFIS, not even with MFIS-SCP of r8a78000. + */ +#define MFIS_CHANNEL_IICR (0 << 1) +#define MFIS_CHANNEL_EICR (1 << 1) + +#endif /* _DT_BINDINGS_SOC_RENESAS_R8A78000_MFIS_H */