Merge tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

aba9753c · Linus Torvalds <[email protected]> · 2024-07-19 15:22:14 -07:00

Pull tty / serial updates from Greg KH:
 "Here is a small set of tty and serial driver updates for 6.11-rc1. Not
  much happened this cycle, unlike the previous kernel release which had
  lots of "excitement" in this part of the kernel. Included in here are
  the following changes:

   - dt binding updates for new platforms

   - 8250 driver updates

   - various small serial driver fixes and updates

   - printk/console naming and matching attempt #2 (was reverted for
     6.10-final, should be good to go this time around, acked by the
     relevant maintainers).

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (22 commits)
  Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports
  serial: core: Add serial_base_match_and_update_preferred_console()
  printk: Add match_devname_and_update_preferred_console()
  serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  dt-bindings: serial: sc16is7xx: add reset-gpios
  dt-bindings: serial: vt8500-uart: convert to json-schema
  serial: 8250_platform: Explicitly show we initialise ISA ports only once
  tty: add missing MODULE_DESCRIPTION() macros
  dt-bindings: serial: mediatek,uart: add MT7988
  serial: sh-sci: Add support for RZ/V2H(P) SoC
  dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support
  dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required
  dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names'
  dt-bindings: serial: renesas,scif: Move ref for serial.yaml at the end
  riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts
  serial: 8250_dw: Use reset array API to get resets
  dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC
  serial: 8250: Extract platform driver
  serial: 8250: Extract RSA bits
  serial: imx: stop casting struct uart_port to struct imx_port
  ...

Commit: aba9753c0677e860f982edff98c7fe5a2b97758c
Parents: d7e78951 · 17199dfc

Merge commit. Changes below are compared with the first parent: d7e78951.

Changes

41 files changed · +1000 −598

File	Status	Add	Del	Content
Documentation/admin-guide/kernel-parameters.txt	modified	+19	−0	View file
Documentation/devicetree/bindings/serial/mediatek,uart.yaml	modified	+1	−0	View file
Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml	modified	+5	−0	View file
Documentation/devicetree/bindings/serial/renesas,scif.yaml	modified	+103	−33	View file
Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml	modified	+17	−1	View file
Documentation/devicetree/bindings/serial/via,vt8500-uart.yaml	added	+46	−0	View file
Documentation/devicetree/bindings/serial/vt8500-uart.txt	deleted	+0	−27	View before deletion
arch/riscv/boot/dts/starfive/jh7110.dtsi	modified	+18	−12	View file
drivers/tty/amiserial.c	modified	+1	−0	View file
drivers/tty/goldfish.c	modified	+1	−0	View file
drivers/tty/n_gsm.c	modified	+1	−0	View file
drivers/tty/n_hdlc.c	modified	+1	−0	View file
drivers/tty/serial/8250/8250.h	modified	+28	−1	View file
drivers/tty/serial/8250/8250_core.c	modified	+8	−452	View file
drivers/tty/serial/8250/8250_dw.c	modified	+1	−1	View file
drivers/tty/serial/8250/8250_parisc.c	modified	+1	−0	View file
drivers/tty/serial/8250/8250_pcilib.c	modified	+1	−0	View file
drivers/tty/serial/8250/8250_platform.c	added	+337	−0	View file
drivers/tty/serial/8250/8250_port.c	modified	+1	−0	View file
drivers/tty/serial/8250/8250_pxa.c	modified	+1	−0	View file
drivers/tty/serial/8250/8250_rsa.c	added	+133	−0	View file
drivers/tty/serial/8250/Makefile	modified	+5	−1	View file
drivers/tty/serial/8250/serial_cs.c	modified	+1	−0	View file
drivers/tty/serial/esp32_acm.c	modified	+1	−0	View file
drivers/tty/serial/esp32_uart.c	modified	+1	−0	View file
drivers/tty/serial/imx.c	modified	+23	−18	View file
drivers/tty/serial/owl-uart.c	modified	+1	−0	View file
drivers/tty/serial/sc16is7xx.c	modified	+28	−3	View file
drivers/tty/serial/serial_base.h	modified	+16	−0	View file
drivers/tty/serial/serial_base_bus.c	modified	+37	−0	View file
drivers/tty/serial/serial_core.c	modified	+4	−0	View file
drivers/tty/serial/serial_mctrl_gpio.c	modified	+1	−0	View file
drivers/tty/serial/sh-sci.c	modified	+50	−5	View file
drivers/tty/serial/sunsu.c	modified	+11	−26	View file
drivers/tty/synclink_gt.c	modified	+1	−0	View file
drivers/tty/ttynull.c	modified	+1	−0	View file
drivers/tty/vt/keyboard.c	modified	+1	−3	View file
include/linux/printk.h	modified	+4	−0	View file
include/linux/serial_sci.h	modified	+1	−0	View file
kernel/printk/console_cmdline.h	modified	+1	−0	View file
kernel/printk/printk.c	modified	+88	−15	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/admin-guide/kernel-parameters.txt

View file

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 2deccf5..6a597e9 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -792,6 +792,25 @@
 			Documentation/networking/netconsole.rst for an
 			alternative.
 
+		<DEVNAME>:<n>.<n>[,options]
+			Use the specified serial port on the serial core bus.
+			The addressing uses DEVNAME of the physical serial port
+			device, followed by the serial core controller instance,
+			and the serial port instance. The options are the same
+			as documented for the ttyS addressing above.
+
+			The mapping of the serial ports to the tty instances
+			can be viewed with:
+
+			$ ls -d /sys/bus/serial-base/devices/*:*.*/tty/*
+			/sys/bus/serial-base/devices/00:04:0.0/tty/ttyS0
+
+			In the above example, the console can be addressed with
+			console=00:04:0.0. Note that a console addressed this
+			way will only get added when the related device driver
+			is ready. The use of an earlycon parameter in addition to
+			the console may be desired for console output early on.
+
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
 		uart[8250],mmio16,<addr>[,options]

Documentation/devicetree/bindings/serial/mediatek,uart.yaml

View file

diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
index 303d02c..ff61ffd 100644
--- a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
@@ -37,6 +37,7 @@ properties:
               - mediatek,mt7623-uart
               - mediatek,mt7629-uart
               - mediatek,mt7986-uart
+              - mediatek,mt7988-uart
               - mediatek,mt8127-uart
               - mediatek,mt8135-uart
               - mediatek,mt8173-uart

Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml

View file

diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml
index 5dec15b..8887148 100644
--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml
@@ -28,6 +28,9 @@ properties:
   clocks:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
   clock-frequency:
     description:
       When there is no clock provider visible to the platform, this
@@ -91,6 +94,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -120,6 +124,7 @@ examples:
             compatible = "nxp,sc16is752";
             reg = <0x54>;
             clocks = <&clk20m>;
+            reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
             interrupt-parent = <&gpio3>;
             interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
             nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */

Documentation/devicetree/bindings/serial/renesas,scif.yaml

View file

diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index f3a3eb2..afc7c05 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -9,9 +9,6 @@ title: Renesas Serial Communication Interface with FIFO (SCIF)
 maintainers:
   - Geert Uytterhoeven <[email protected]>
 
-allOf:
-  - $ref: serial.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -83,6 +80,8 @@ properties:
               - renesas,scif-r9a08g045      # RZ/G3S
           - const: renesas,scif-r9a07g044   # RZ/G2{L,LC} fallback
 
+      - const: renesas,scif-r9a09g057       # RZ/V2H(P)
+
   reg:
     maxItems: 1
 
@@ -95,28 +94,25 @@ properties:
           - description: Receive buffer full interrupt
           - description: Transmit buffer empty interrupt
           - description: Break interrupt
-      - items:
-          - description: Error interrupt
-          - description: Receive buffer full interrupt
-          - description: Transmit buffer empty interrupt
-          - description: Break interrupt
           - description: Data Ready interrupt
           - description: Transmit End interrupt
+          - description: Transmit End/Data Ready interrupt
+          - description: Receive buffer full interrupt (EDGE trigger)
+          - description: Transmit buffer empty interrupt (EDGE trigger)
+        minItems: 4
 
   interrupt-names:
-    oneOf:
-      - items:
-          - const: eri
-          - const: rxi
-          - const: txi
-          - const: bri
-      - items:
-          - const: eri
-          - const: rxi
-          - const: txi
-          - const: bri
-          - const: dri
-          - const: tei
+    minItems: 4
+    items:
+      - const: eri
+      - const: rxi
+      - const: txi
+      - const: bri
+      - const: dri
+      - const: tei
+      - const: tei-dri
+      - const: rxi-edge
+      - const: txi-edge
 
   clocks:
     minItems: 1
@@ -161,18 +157,92 @@ required:
   - clock-names
   - power-domains
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,rcar-gen2-scif
-          - renesas,rcar-gen3-scif
-          - renesas,rcar-gen4-scif
-          - renesas,scif-r9a07g044
-then:
-  required:
-    - resets
+allOf:
+  - $ref: serial.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-scif
+              - renesas,rcar-gen3-scif
+              - renesas,rcar-gen4-scif
+              - renesas,scif-r9a07g044
+              - renesas,scif-r9a09g057
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen1-scif
+              - renesas,rcar-gen2-scif
+              - renesas,rcar-gen3-scif
+              - renesas,rcar-gen4-scif
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+
+        interrupt-names: false
+    else:
+      required:
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,scif-r7s72100
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+
+        interrupt-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,scif-r7s9210
+              - renesas,scif-r9a07g044
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
+        interrupt-names:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,scif-r9a09g057
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+        interrupts:
+          minItems: 9
+
+        interrupt-names:
+          minItems: 9
 
 unevaluatedProperties: false
 

Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml

View file

diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index 1001d2a..4cdb0dc 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -13,6 +13,20 @@ allOf:
   - $ref: serial.yaml#
   - $ref: rs485.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-uart
+    then:
+      properties:
+        resets:
+          minItems: 2
+    else:
+      properties:
+        resets:
+          maxItems: 1
+
 properties:
   compatible:
     oneOf:
@@ -48,6 +62,7 @@ properties:
           - enum:
               - starfive,jh7100-hsuart
               - starfive,jh7100-uart
+              - starfive,jh7110-uart
           - const: snps,dw-apb-uart
       - const: snps,dw-apb-uart
 
@@ -82,7 +97,8 @@ properties:
     type: boolean
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   reg-shift: true
 

Documentation/devicetree/bindings/serial/via,vt8500-uart.yaml

View file

diff --git a/Documentation/devicetree/bindings/serial/via,vt8500-uart.yaml b/Documentation/devicetree/bindings/serial/via,vt8500-uart.yaml
new file mode 100644
index 0000000..9c68192
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/via,vt8500-uart.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/via,vt8500-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA VT8500 and WonderMedia WM8xxx UART Controller
+
+maintainers:
+  - Alexey Charkov <[email protected]>
+
+allOf:
+  - $ref: serial.yaml
+
+properties:
+  compatible:
+    enum:
+      - via,vt8500-uart # up to WM8850/WM8950
+      - wm,wm8880-uart  # for WM8880 and later
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@d8200000 {
+        compatible = "via,vt8500-uart";
+        reg = <0xd8200000 0x1040>;
+        interrupts = <32>;
+        clocks = <&clkuart0>;
+    };

Documentation/devicetree/bindings/serial/vt8500-uart.txt

View before deletion

diff --git a/Documentation/devicetree/bindings/serial/vt8500-uart.txt b/Documentation/devicetree/bindings/serial/vt8500-uart.txt
deleted file mode 100644
index 2b64e61..0000000
--- a/Documentation/devicetree/bindings/serial/vt8500-uart.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* VIA VT8500 and WonderMedia WM8xxx UART Controller
-
-Required properties:
-- compatible: should be "via,vt8500-uart" (for VIA/WonderMedia chips up to and
-	including WM8850/WM8950), or "wm,wm8880-uart" (for WM8880 and later)
-
-- reg: base physical address of the controller and length of memory mapped
-	region.
-
-- interrupts: hardware interrupt number
-
-- clocks: shall be the input parent clock phandle for the clock. This should
-	be the 24Mhz reference clock.
-
-Aliases may be defined to ensure the correct ordering of the uarts.
-
-Example:
-	aliases {
-		serial0 = &uart0;
-	};
-
-	uart0: serial@d8200000 {
-		compatible = "via,vt8500-uart";
-		reg = <0xd8200000 0x1040>;
-		interrupts = <32>;
-		clocks = <&clkuart0>;
-	};

arch/riscv/boot/dts/starfive/jh7110.dtsi

View file

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 5ac7075..0d83393 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -387,12 +387,13 @@
 		};
 
 		uart0: serial@10000000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10000000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART0_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART0_APB>,
+				 <&syscrg JH7110_SYSRST_UART0_CORE>;
 			interrupts = <32>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -400,12 +401,13 @@
 		};
 
 		uart1: serial@10010000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10010000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART1_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART1_APB>,
+				 <&syscrg JH7110_SYSRST_UART1_CORE>;
 			interrupts = <33>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -413,12 +415,13 @@
 		};
 
 		uart2: serial@10020000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10020000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART2_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART2_APB>,
+				 <&syscrg JH7110_SYSRST_UART2_CORE>;
 			interrupts = <34>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -642,12 +645,13 @@
 		};
 
 		uart3: serial@12000000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12000000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART3_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART3_APB>,
+				 <&syscrg JH7110_SYSRST_UART3_CORE>;
 			interrupts = <45>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -655,12 +659,13 @@
 		};
 
 		uart4: serial@12010000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12010000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART4_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART4_APB>,
+				 <&syscrg JH7110_SYSRST_UART4_CORE>;
 			interrupts = <46>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -668,12 +673,13 @@
 		};
 
 		uart5: serial@12020000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12020000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART5_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART5_APB>,
+				 <&syscrg JH7110_SYSRST_UART5_CORE>;
 			interrupts = <47>;
 			reg-io-width = <4>;
 			reg-shift = <2>;

drivers/tty/amiserial.c

View file

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 8c964da..3716428 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1660,5 +1660,6 @@ console_initcall(amiserial_console_init);
 
 #endif /* CONFIG_SERIAL_CONSOLE && !MODULE */
 
+MODULE_DESCRIPTION("Serial driver for the amiga builtin port");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:amiga-serial");

drivers/tty/goldfish.c

View file

diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 34421ec..c60745f 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -470,4 +470,5 @@ static struct platform_driver goldfish_tty_platform_driver = {
 
 module_platform_driver(goldfish_tty_platform_driver);
 
+MODULE_DESCRIPTION("Goldfish TTY Driver");
 MODULE_LICENSE("GPL v2");

drivers/tty/n_gsm.c

View file

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index be35f73..5d37a09 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -4634,5 +4634,6 @@ module_init(gsm_init);
 module_exit(gsm_exit);
 
 
+MODULE_DESCRIPTION("GSM 0710 tty multiplexor");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_LDISC(N_GSM0710);

drivers/tty/n_hdlc.c

View file

diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 1615f07..4a4dc58 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -822,6 +822,7 @@ static void __exit n_hdlc_exit(void)
 module_init(n_hdlc_init);
 module_exit(n_hdlc_exit);
 
+MODULE_DESCRIPTION("HDLC line discipline support");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Paul Fulghum [email protected]");
 module_param(maxframe, int, 0);

drivers/tty/serial/8250/8250.h

View file

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 6a7b286..e5310c6 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -9,7 +9,7 @@
 
 #include <linux/bits.h>
 #include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
 #include <linux/dmaengine.h>
 
 #include "../serial_mctrl_gpio.h"
@@ -93,6 +93,10 @@ struct serial8250_config {
 #define UART_BUG_THRE	BIT(3)	/* UART has buggy THRE reassertion */
 #define UART_BUG_TXRACE	BIT(5)	/* UART Tx fails to set remote DR */
 
+/* Module parameters */
+#define UART_NR	CONFIG_SERIAL_8250_NR_UARTS
+
+extern unsigned int nr_uarts;
 
 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
 #define SERIAL8250_SHARE_IRQS 1
@@ -100,6 +104,9 @@ struct serial8250_config {
 #define SERIAL8250_SHARE_IRQS 0
 #endif
 
+extern unsigned int share_irqs;
+extern unsigned int skip_txen_test;
+
 #define SERIAL8250_PORT_FLAGS(_base, _irq, _flags)		\
 	{							\
 		.iobase		= _base,			\
@@ -111,6 +118,19 @@ struct serial8250_config {
 
 #define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0)
 
+extern struct uart_driver serial8250_reg;
+void serial8250_register_ports(struct uart_driver *drv, struct device *dev);
+
+/* Legacy ISA bus related APIs */
+typedef void (*serial8250_isa_config_fn)(int, struct uart_port *, u32 *);
+extern serial8250_isa_config_fn serial8250_isa_config;
+
+void serial8250_isa_init_ports(void);
+
+extern struct platform_device *serial8250_isa_devs;
+
+extern const struct uart_ops *univ8250_port_base_ops;
+extern struct uart_ops univ8250_port_ops;
 
 static inline int serial_in(struct uart_8250_port *up, int offset)
 {
@@ -200,6 +220,7 @@ static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
 	return true;
 }
 
+struct uart_8250_port *serial8250_setup_port(int index);
 struct uart_8250_port *serial8250_get_port(int line);
 
 void serial8250_rpm_get(struct uart_8250_port *p);
@@ -301,6 +322,12 @@ static inline int serial8250_pnp_init(void) { return 0; }
 static inline void serial8250_pnp_exit(void) { }
 #endif
 
+#ifdef CONFIG_SERIAL_8250_RSA
+void univ8250_rsa_support(struct uart_ops *ops);
+#else
+static inline void univ8250_rsa_support(struct uart_ops *ops) { }
+#endif
+
 #ifdef CONFIG_SERIAL_8250_FINTEK
 int fintek_8250_probe(struct uart_8250_port *uart);
 #else

drivers/tty/serial/8250/8250_core.c

View file

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index b0adafc..29e4b83 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -6,11 +6,9 @@
  *
  *  Copyright (C) 2001 Russell King.
  *
- *  Supports: ISA-compatible 8250/16550 ports

This diff is incomplete. Download the complete patch.