diff --git a/.mailmap b/.mailmap index 298b7a8..9d4fc1f 100644 --- a/.mailmap +++ b/.mailmap @@ -279,6 +279,7 @@ Nicolas Pitre Nicolas Pitre Nicolas Saenz Julienne Nicolas Saenz Julienne +Niklas Söderlund Oleksij Rempel Oleksij Rempel Oleksij Rempel diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 6423377..3608173 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -86,6 +86,7 @@ properties: - enum: - amlogic,p281 - oranth,tx3-mini + - jethome,jethub-j80 - const: amlogic,s905w - const: amlogic,meson-gxl @@ -133,6 +134,7 @@ properties: items: - enum: - amlogic,s400 + - jethome,jethub-j100 - const: amlogic,a113d - const: amlogic,meson-axg @@ -141,6 +143,7 @@ properties: - enum: - amediatech,x96-max - amlogic,u200 + - radxa,zero - seirobotics,sei510 - const: amlogic,g12a diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index aad3517..c612e1f 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -126,6 +126,18 @@ properties: - const: atmel,sama5d3 - const: atmel,sama5 + - description: CalAmp LMU5000 board + items: + - const: calamp,lmu5000 + - const: atmel,at91sam9g20 + - const: atmel,at91sam9 + + - description: Exegin Q5xR5 board + items: + - const: exegin,q5xr5 + - const: atmel,at91sam9g20 + - const: atmel,at91sam9 + - items: - enum: - atmel,sama5d31 diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml index 230b80d..5dc4824 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml @@ -19,6 +19,7 @@ properties: items: - enum: - raspberrypi,400 + - raspberrypi,4-compute-module - raspberrypi,4-model-b - const: brcm,bcm2711 diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml index 476bc23..7d184ba 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml @@ -22,16 +22,61 @@ properties: $nodename: const: '/' compatible: - items: - - enum: - - brcm,bcm58522 - - brcm,bcm58525 - - brcm,bcm58535 - - brcm,bcm58622 - - brcm,bcm58623 - - brcm,bcm58625 - - brcm,bcm88312 - - const: brcm,nsp + oneOf: + - description: BCM58522 based boards + items: + - enum: + - brcm,bcm958522er + - const: brcm,bcm58522 + - const: brcm,nsp + + - description: BCM58525 based boards + items: + - enum: + - brcm,bcm958525er + - brcm,bcm958525xmc + - const: brcm,bcm58525 + - const: brcm,nsp + + - description: BCM58535 based boards + items: + - const: brcm,bcm58535 + - const: brcm,nsp + + - description: BCM58622 based boards + items: + - enum: + - brcm,bcm958622hr + - const: brcm,bcm58622 + - const: brcm,nsp + + - description: BCM58623 based boards + items: + - enum: + - brcm,bcm958623hr + - const: brcm,bcm58623 + - const: brcm,nsp + + - description: BCM58625 based boards + items: + - enum: + - brcm,bcm958625hr + - brcm,bcm958625k + - meraki,mx64 + - meraki,mx64-a0 + - meraki,mx64w + - meraki,mx64w-a0 + - meraki,mx65 + - meraki,mx65w + - const: brcm,bcm58625 + - const: brcm,nsp + + - description: BCM88312 based boards + items: + - enum: + - brcm,bcm988312hr + - const: brcm,bcm88312 + - const: brcm,nsp additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 35b552c..49bbaf1 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -171,6 +171,8 @@ properties: - qcom,kryo385 - qcom,kryo468 - qcom,kryo485 + - qcom,kryo560 + - qcom,kryo570 - qcom,kryo685 - qcom,scorpion diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 60f4862..0b595b2 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -235,7 +235,7 @@ properties: - technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi - technologic,imx6q-ts4900 - technologic,imx6q-ts7970 - - toradex,apalis_imx6q # Apalis iMX6 Module + - toradex,apalis_imx6q # Apalis iMX6 Modules - udoo,imx6q-udoo # Udoo i.MX6 Quad Board - uniwest,imx6q-evi # Uniwest Evi - variscite,dt6customboard @@ -314,18 +314,12 @@ properties: - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - const: fsl,imx6q - - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Module + - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Modules items: - enum: - - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board - - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board - - const: toradex,apalis_imx6q - - const: fsl,imx6q - - - description: i.MX6Q Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1 - items: - - const: toradex,apalis_imx6q-ixora-v1.1 - - const: toradex,apalis_imx6q-ixora + - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board + - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board + - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board - const: toradex,apalis_imx6q - const: fsl,imx6q @@ -393,6 +387,8 @@ properties: - technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 + - toradex,colibri_imx6dl # Colibri iMX6 Modules + - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board - vdl,lanmcu # Van der Laan LANMCU board - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board @@ -466,20 +462,18 @@ properties: - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - const: fsl,imx6dl - - description: i.MX6DL Toradex Colibri iMX6 Module on Colibri - Evaluation Board V3 + - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules items: - - const: toradex,colibri_imx6dl-eval-v3 - - const: toradex,colibri_imx6dl # Colibri iMX6 Module + - enum: + - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6DL/S Module on Colibri Evaluation Board V3 + - const: toradex,colibri_imx6dl # Colibri iMX6DL/S Module - const: fsl,imx6dl - - description: i.MX6DL Toradex Colibri iMX6 Module V1.1 on Colibri - Evaluation Board V3 + - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules items: - - const: toradex,colibri_imx6dl-v1_1-eval-v3 - - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1 - - const: toradex,colibri_imx6dl-eval-v3 - - const: toradex,colibri_imx6dl # Colibri iMX6 Module + - enum: + - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3 + - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6DL/S V1.1 Module - const: fsl,imx6dl - description: i.MX6S DHCOM DRC02 Board @@ -494,6 +488,7 @@ properties: - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board - kobo,tolino-shine2hd - kobo,tolino-shine3 + - kobo,tolino-vision5 - revotics,imx6sl-warp # Revotics WaRP Board - const: fsl,imx6sl @@ -502,6 +497,7 @@ properties: - enum: - fsl,imx6sll-evk - kobo,clarahd + - kobo,librah2o - const: fsl,imx6sll - description: i.MX6SX based Boards @@ -586,8 +582,9 @@ properties: - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board - kontron,imx6ull-n6411-som # Kontron N6411 SOM - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board + - toradex,colibri-imx6ull # Colibri iMX6ULL Modules + - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module + - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules - const: fsl,imx6ull - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board @@ -605,6 +602,27 @@ properties: - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL - const: fsl,imx6ull + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules + items: + - enum: + - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board + - const: toradex,colibri-imx6ull # Colibri iMX6ULL Module + - const: fsl,imx6dl + + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module + items: + - enum: + - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board + - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module + - const: fsl,imx6dl + + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules + items: + - enum: + - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board + - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module + - const: fsl,imx6dl + - description: Kontron N6411 S Board items: - const: kontron,imx6ull-n6411-s @@ -622,6 +640,7 @@ properties: items: - enum: - element14,imx7s-warp # Element14 Warp i.MX7 Board + - toradex,colibri-imx7s # Colibri iMX7S Module - const: fsl,imx7s - description: i.MX7S Boards with Toradex Colibri iMX7S Module @@ -653,15 +672,8 @@ properties: - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph - technexion,imx7d-pico-pi # TechNexion i.MX7D Pico-Pi - - toradex,colibri-imx7d # Colibri iMX7 Dual Module - - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board - - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module - - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on - # Aster Carrier Board - - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on - # Colibri Evaluation Board V3 - - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on - # Colibri Evaluation Board V3 + - toradex,colibri-imx7d # Colibri iMX7D Module + - toradex,colibri-imx7d-emmc # Colibri iMX7D 1GB (eMMC) Module - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board - const: fsl,imx7d @@ -686,12 +698,12 @@ properties: - description: i.MX7D Boards with Toradex Colibri i.MX7D Module items: - enum: - - toradex,colibri-imx7d-aster # Module on Aster Carrier Board - - toradex,colibri-imx7d-eval-v3 # Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7d-aster # Colibri iMX7D Module on Aster Carrier Board + - toradex,colibri-imx7d-eval-v3 # Colibri iMX7D Module on Colibri Evaluation Board V3 - const: toradex,colibri-imx7d - const: fsl,imx7d - - description: i.MX7D Boards with Toradex Colibri i.MX7D eMMC Module + - description: i.MX7D Boards with Toradex Colibri i.MX7D 1GB (eMMC) Module items: - enum: - toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board @@ -812,10 +824,10 @@ properties: - enum: - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board - fsl,imx8qxp-mek # i.MX8QXP MEK Board - - toradex,colibri-imx8x # Colibri iMX8X Module + - toradex,colibri-imx8x # Colibri iMX8X Modules - const: fsl,imx8qxp - - description: Toradex Colibri i.MX8 Evaluation Board + - description: i.MX8QXP Boards with Toradex Coilbri iMX8X Modules items: - enum: - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3 @@ -847,9 +859,10 @@ properties: - description: VF610 based Boards items: - enum: + - fsl,vf610-twr # VF610 Tower Board - lwn,bk4 # Liebherr BK4 controller - phytec,vf610-cosmic # PHYTEC Cosmic/Cosmic+ Board - - fsl,vf610-twr # VF610 Tower Board + - toradex,vf610-colibri_vf61 # Colibri VF61 Modules - const: fsl,vf610 - description: Toradex Colibri VF61 Module on Colibri Evaluation Board @@ -886,6 +899,7 @@ properties: - enum: - fsl,ls1021a-moxa-uc-8410a - fsl,ls1021a-qds + - fsl,ls1021a-tsn - fsl,ls1021a-twr - const: fsl,ls1021a @@ -977,6 +991,8 @@ properties: - description: LX2160A based Boards items: - enum: + - fsl,lx2160a-bluebox3 + - fsl,lx2160a-bluebox3-rev-a - fsl,lx2160a-qds - fsl,lx2160a-rdb - fsl,lx2162a-qds @@ -990,6 +1006,13 @@ properties: - const: solidrun,lx2160a-cex7 - const: fsl,lx2160a + - description: S32G2 based Boards + items: + - enum: + - nxp,s32g274a-evb + - nxp,s32g274a-rdb2 + - const: nxp,s32g2 + - description: S32V234 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 80a05f6..0fa5549 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -32,6 +32,7 @@ properties: - const: mediatek,mt6580 - items: - enum: + - fairphone,fp1 - mundoreader,bq-aquaris5 - const: mediatek,mt6589 - items: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index f9ffa5b..763c623 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -43,6 +43,9 @@ properties: "#clock-cells": const: 1 + '#reset-cells': + const: 1 + required: - compatible - reg @@ -56,4 +59,5 @@ examples: compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0x14000000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 880ddaf..c8808e0 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -25,6 +25,7 @@ description: | The 'SoC' element must be one of the following strings: apq8016 + apq8026 apq8074 apq8084 apq8096 @@ -44,6 +45,8 @@ description: | sdm660 sdm845 sdx55 + sdx65 + sm7225 sm8150 sm8250 sm8350 @@ -94,6 +97,14 @@ properties: - items: - enum: + - lg,lenok + - const: qcom,apq8026 + + - items: + - enum: + - asus,nexus7-flo + - lg,nexus4-mako + - sony,xperia-yuga - qcom,apq8064-cm-qs600 - qcom,apq8064-ifc6410 - const: qcom,apq8064 @@ -129,6 +140,7 @@ properties: - enum: - fairphone,fp2 - lge,hammerhead + - samsung,klte - sony,xperia-amami - sony,xperia-castor - sony,xperia-honami @@ -163,6 +175,7 @@ properties: - items: - enum: + - qcom,ipq4019-ap-dk01.1-c1 - qcom,ipq4019-ap-dk04.1-c3 - qcom,ipq4019-ap-dk07.1-c1 - qcom,ipq4019-ap-dk07.1-c2 @@ -208,6 +221,11 @@ properties: - items: - enum: + - qcom,sdx65-mtp + - const: qcom,sdx65 + + - items: + - enum: - qcom,ipq6018-cp01 - qcom,ipq6018-cp01-c1 - const: qcom,ipq6018 @@ -219,6 +237,11 @@ properties: - items: - enum: + - fairphone,fp4 + - const: qcom,sm7225 + + - items: + - enum: - qcom,sm8150-mtp - const: qcom,sm8150 diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 8a11918..5172065 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -255,12 +255,19 @@ properties: - enum: - renesas,h3ulcb - renesas,m3ulcb + - renesas,m3nulcb - enum: + - renesas,r8a779m0 - renesas,r8a779m1 + - renesas,r8a779m2 - renesas,r8a779m3 + - renesas,r8a779m4 + - renesas,r8a779m5 + - renesas,r8a779m8 - enum: - renesas,r8a7795 - renesas,r8a77961 + - renesas,r8a77965 - description: R-Car M3-N (R8A77965) items: @@ -308,6 +315,14 @@ properties: - const: renesas,falcon-cpu - const: renesas,r8a779a0 + - description: R-Car H3e (R8A779M0) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m0 + - const: renesas,r8a7795 + - description: R-Car H3e-2G (R8A779M1) items: - enum: @@ -316,6 +331,14 @@ properties: - const: renesas,r8a779m1 - const: renesas,r8a7795 + - description: R-Car M3e (R8A779M2) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m2 + - const: renesas,r8a77961 + - description: R-Car M3e-2G (R8A779M3) items: - enum: @@ -324,6 +347,44 @@ properties: - const: renesas,r8a779m3 - const: renesas,r8a77961 + - description: R-Car M3Ne (R8A779M4) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m4 + - const: renesas,r8a77965 + + - description: R-Car M3Ne-2G (R8A779M5) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m5 + - const: renesas,r8a77965 + + - description: R-Car E3e (R8A779M6) + items: + - enum: + - renesas,ebisu # Ebisu + - const: renesas,r8a779m6 + - const: renesas,r8a77990 + + - description: R-Car D3e (R8A779M7) + items: + - enum: + - renesas,draak # Draak + - const: renesas,r8a779m7 + - const: renesas,r8a77995 + + - description: R-Car H3Ne (R8A779M8) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m8 + - const: renesas,r8a7795 + - description: RZ/N1D (R9A06G032) items: - enum: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 6546b01..4aed161 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -115,6 +115,11 @@ properties: - const: firefly,roc-rk3328-cc - const: rockchip,rk3328 + - description: Firefly ROC-RK3328-PC + items: + - const: firefly,roc-rk3328-pc + - const: rockchip,rk3328 + - description: Firefly ROC-RK3399-PC items: - enum: @@ -122,6 +127,12 @@ properties: - firefly,roc-rk3399-pc-mezzanine - const: rockchip,rk3399 + - description: Firefly ROC-RK3399-PC-PLUS + items: + - enum: + - firefly,roc-rk3399-pc-plus + - const: rockchip,rk3399 + - description: FriendlyElec NanoPi R2S items: - const: friendlyarm,nanopi-r2s @@ -287,6 +298,34 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Scarlet - Dumo (ASUS Chromebook Tablet CT100) + items: + - const: google,scarlet-rev15-sku0 + - const: google,scarlet-rev15 + - const: google,scarlet-rev14-sku0 + - const: google,scarlet-rev14 + - const: google,scarlet-rev13-sku0 + - const: google,scarlet-rev13 + - const: google,scarlet-rev12-sku0 + - const: google,scarlet-rev12 + - const: google,scarlet-rev11-sku0 + - const: google,scarlet-rev11 + - const: google,scarlet-rev10-sku0 + - const: google,scarlet-rev10 + - const: google,scarlet-rev9-sku0 + - const: google,scarlet-rev9 + - const: google,scarlet-rev8-sku0 + - const: google,scarlet-rev8 + - const: google,scarlet-rev7-sku0 + - const: google,scarlet-rev7 + - const: google,scarlet-rev6-sku0 + - const: google,scarlet-rev6 + - const: google,scarlet-rev5-sku0 + - const: google,scarlet-rev5 + - const: google,scarlet + - const: google,gru + - const: rockchip,rk3399 + - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10) items: - const: google,scarlet-rev15-sku7 @@ -455,16 +494,23 @@ properties: - const: pine64,rockpro64 - const: rockchip,rk3399 + - description: Pine64 Quartz64 Model A + items: + - const: pine64,quartz64-a + - const: rockchip,rk3566 + - description: Radxa Rock items: - const: radxa,rock - const: rockchip,rk3188 - - description: Radxa ROCK Pi 4A/B/C + - description: Radxa ROCK Pi 4A/A+/B/B+/C items: - enum: - radxa,rockpi4a + - radxa,rockpi4a-plus - radxa,rockpi4b + - radxa,rockpi4b-plus - radxa,rockpi4c - const: radxa,rockpi4 - const: rockchip,rk3399 diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml index 53115b9..5ece380 100644 --- a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml @@ -22,7 +22,9 @@ select: - rockchip,px30-pmu - rockchip,rk3066-pmu - rockchip,rk3288-pmu + - rockchip,rk3368-pmu - rockchip,rk3399-pmu + - rockchip,rk3568-pmu required: - compatible @@ -34,7 +36,9 @@ properties: - rockchip,px30-pmu - rockchip,rk3066-pmu - rockchip,rk3288-pmu + - rockchip,rk3368-pmu - rockchip,rk3399-pmu + - rockchip,rk3568-pmu - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index 0796f0c..ef6dc14 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -199,6 +199,12 @@ properties: - samsung,exynos7-espresso # Samsung Exynos7 Espresso - const: samsung,exynos7 + - description: Exynos Auto v9 based boards + items: + - enum: + - samsung,exynosautov9-sadk # Samsung Exynos Auto v9 SADK + - const: samsung,exynosautov9 + required: - compatible diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml index 7b6ae30..2c12e57 100644 --- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml +++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml @@ -30,6 +30,11 @@ properties: - sprd,sp9863a-1h10 - const: sprd,sc9863a + - items: + - enum: + - sprd,ums512-1h10 + - const: sprd,ums512 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 9a77ab7..9ac7da0 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -57,6 +57,10 @@ properties: - const: st,stm32h750 - items: - enum: + - st,stm32mp135f-dk + - const: st,stm32mp135 + - items: + - enum: - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml index e713a6f..29c9961 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -30,6 +30,7 @@ properties: enum: - allwinner,sun5i-a13-mbus - allwinner,sun8i-h3-mbus + - allwinner,sun8i-r40-mbus - allwinner,sun50i-a64-mbus reg: diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml new file mode 100644 index 0000000..f3878e0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner CPU Configuration Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + compatible: + enum: + - allwinner,sun6i-a31-cpuconfig + - allwinner,sun8i-a23-cpuconfig + - allwinner,sun8i-a83t-cpucfg + - allwinner,sun8i-a83t-r-cpucfg + - allwinner,sun9i-a80-cpucfg + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cpucfg@1f01c00 { + compatible = "allwinner,sun6i-a31-cpuconfig"; + reg = <0x01f01c00 0x300>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml new file mode 100644 index 0000000..668aadb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun9i-a80-prcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 PRCM Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + compatible: + const: allwinner,sun9i-a80-prcm + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + prcm@8001400 { + compatible = "allwinner,sun9i-a80-prcm"; + reg = <0x08001400 0x200>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index c5aa362..cf32723 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -24,16 +24,27 @@ properties: - enum: - ti,am654-evm - siemens,iot2050-basic + - siemens,iot2050-basic-pg2 - siemens,iot2050-advanced + - siemens,iot2050-advanced-pg2 - const: ti,am654 - description: K3 J721E SoC - items: + oneOf: - const: ti,j721e + - items: + - enum: + - ti,j721e-evm + - ti,j721e-sk + - const: ti,j721e - description: K3 J7200 SoC - items: + oneOf: - const: ti,j7200 + - items: + - enum: + - ti,j7200-evm + - const: ti,j7200 - description: K3 AM642 SoC items: diff --git a/Documentation/devicetree/bindings/arm/toshiba.yaml b/Documentation/devicetree/bindings/arm/toshiba.yaml index 001bbbc..9c1cacb 100644 --- a/Documentation/devicetree/bindings/arm/toshiba.yaml +++ b/Documentation/devicetree/bindings/arm/toshiba.yaml @@ -18,6 +18,7 @@ properties: items: - enum: - toshiba,tmpv7708-rm-mbrc # TMPV7708 RM main board + - toshiba,tmpv7708-visrobo-vrb # TMPV7708 VisROBO VRB board - const: toshiba,tmpv7708 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml index f52c7e8..4dc0e01 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -87,6 +87,7 @@ properties: - xlnx,zynqmp-zcu102-revA - xlnx,zynqmp-zcu102-revB - xlnx,zynqmp-zcu102-rev1.0 + - xlnx,zynqmp-zcu102-rev1.1 - const: xlnx,zynqmp-zcu102 - const: xlnx,zynqmp @@ -115,6 +116,22 @@ properties: - const: xlnx,zynqmp-zcu111 - const: xlnx,zynqmp + - description: Xilinx Kria SOMs + items: + - const: xlnx,zynqmp-sm-k26-rev1 + - const: xlnx,zynqmp-sm-k26-revB + - const: xlnx,zynqmp-sm-k26-revA + - const: xlnx,zynqmp-sm-k26 + - const: xlnx,zynqmp + + - description: Xilinx Kria SOMs (starter) + items: + - const: xlnx,zynqmp-smk-k26-rev1 + - const: xlnx,zynqmp-smk-k26-revB + - const: xlnx,zynqmp-smk-k26-revA + - const: xlnx,zynqmp-smk-k26 + - const: xlnx,zynqmp + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml index 3260857..c8b2459 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml @@ -47,6 +47,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - "#clock-cells" - compatible diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml index 031e35e..48c8cad 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml @@ -51,6 +51,9 @@ properties: dma-names: const: audio-rx + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml index 8a73780..c55a821 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml @@ -24,6 +24,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml index 9b24081..5d921e3 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml @@ -24,6 +24,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index d30428b..36b0145 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -19,6 +19,11 @@ Required properties: Documentation/devicetree/bindings/graph.txt. This port should be connected to the input port of an attached DSI panel or DSI-to-eDP encoder chip. +Optional properties: +- resets: list of phandle + reset specifier pair, as described in [1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + MIPI TX Configuration Module ============================ @@ -45,6 +50,7 @@ dsi0: dsi@1401b000 { clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>, <&mipi_tx0>; clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>; phys = <&mipi_tx0>; phy-names = "dphy"; diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml new file mode 100644 index 0000000..3cf8629 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Device tree binding for NVIDIA Tegra NVDEC + +description: | + NVDEC is the hardware video decoder present on NVIDIA Tegra210 + and newer chips. It is located on the Host1x bus and typically + programmed through Host1x channels. + +maintainers: + - Thierry Reding + - Mikko Perttunen + +properties: + $nodename: + pattern: "^nvdec@[0-9a-f]*$" + + compatible: + enum: + - nvidia,tegra210-nvdec + - nvidia,tegra186-nvdec + - nvidia,tegra194-nvdec + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: nvdec + + resets: + maxItems: 1 + + reset-names: + items: + - const: nvdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + + interconnects: + items: + - description: DMA read memory client + - description: DMA read 2 memory client + - description: DMA write memory client + + interconnect-names: + items: + - const: dma-mem + - const: read-1 + - const: write + + nvidia,host1x-class: + description: | + Host1x class of the engine, used to specify the targeted engine + when programming the engine through Host1x channels or when + configuring engine-specific behavior in Host1x. + default: 0xf0 + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + nvdec@15480000 { + compatible = "nvidia,tegra186-nvdec"; + reg = <0x15480000 0x40000>; + clocks = <&bpmp TEGRA186_CLK_NVDEC>; + clock-names = "nvdec"; + resets = <&bpmp TEGRA186_RESET_NVDEC>; + reset-names = "nvdec"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "read-1", "write"; + iommus = <&smmu TEGRA186_SID_NVDEC>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt deleted file mode 100644 index c1359f4..0000000 --- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +++ /dev/null @@ -1,157 +0,0 @@ -Device tree bindings for OMAP general purpose memory controllers (GPMC) - -The actual devices are instantiated from the child nodes of a GPMC node. - -Required properties: - - - compatible: Should be set to one of the following: - - ti,omap2420-gpmc (omap2420) - ti,omap2430-gpmc (omap2430) - ti,omap3430-gpmc (omap3430 & omap3630) - ti,omap4430-gpmc (omap4430 & omap4460 & omap543x) - ti,am3352-gpmc (am335x devices) - - - reg: A resource specifier for the register space - (see the example below) - - ti,hwmods: Should be set to "ti,gpmc" until the DT transition is - completed. - - #address-cells: Must be set to 2 to allow memory address translation - - #size-cells: Must be set to 1 to allow CS address passing - - gpmc,num-cs: The maximum number of chip-select lines that controller - can support. - - gpmc,num-waitpins: The maximum number of wait pins that controller can - support. - - ranges: Must be set up to reflect the memory layout with four - integer values for each chip-select line in use: - - 0 - - Currently, calculated values derived from the contents - of the per-CS register GPMC_CONFIG7 (as set up by the - bootloader) are used for the physical address decoding. - As this will change in the future, filling correct - values here is a requirement. - - interrupt-controller: The GPMC driver implements and interrupt controller for - the NAND events "fifoevent" and "termcount" plus the - rising/falling edges on the GPMC_WAIT pins. - The interrupt number mapping is as follows - 0 - NAND_fifoevent - 1 - NAND_termcount - 2 - GPMC_WAIT0 pin edge - 3 - GPMC_WAIT1 pin edge, and so on. - - interrupt-cells: Must be set to 2 - - gpio-controller: The GPMC driver implements a GPIO controller for the - GPMC WAIT pins that can be used as general purpose inputs. - 0 maps to GPMC_WAIT0 pin. - - gpio-cells: Must be set to 2 - -Required properties when using NAND prefetch dma: - - dmas GPMC NAND prefetch dma channel - - dma-names Must be set to "rxtx" - -Timing properties for child nodes. All are optional and default to 0. - - - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds - - Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2: - - gpmc,cs-on-ns: Assertion time - - gpmc,cs-rd-off-ns: Read deassertion time - - gpmc,cs-wr-off-ns: Write deassertion time - - ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3: - - gpmc,adv-on-ns: Assertion time - - gpmc,adv-rd-off-ns: Read deassertion time - - gpmc,adv-wr-off-ns: Write deassertion time - - gpmc,adv-aad-mux-on-ns: Assertion time for AAD - - gpmc,adv-aad-mux-rd-off-ns: Read deassertion time for AAD - - gpmc,adv-aad-mux-wr-off-ns: Write deassertion time for AAD - - WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: - - gpmc,we-on-ns Assertion time - - gpmc,we-off-ns: Deassertion time - - OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: - - gpmc,oe-on-ns: Assertion time - - gpmc,oe-off-ns: Deassertion time - - gpmc,oe-aad-mux-on-ns: Assertion time for AAD - - gpmc,oe-aad-mux-off-ns: Deassertion time for AAD - - Access time and cycle time timings (in nanoseconds) corresponding to - GPMC_CONFIG5: - - gpmc,page-burst-access-ns: Multiple access word delay - - gpmc,access-ns: Start-cycle to first data valid delay - - gpmc,rd-cycle-ns: Total read cycle time - - gpmc,wr-cycle-ns: Total write cycle time - - gpmc,bus-turnaround-ns: Turn-around time between successive accesses - - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses - - gpmc,clk-activation-ns: GPMC clock activation time - - gpmc,wait-monitoring-ns: Start of wait monitoring with regard to valid - data - -Boolean timing parameters. If property is present parameter enabled and -disabled if omitted: - - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock - - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock - - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive - accesses to a different CS - - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive - accesses to the same CS - - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock - - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock - - gpmc,time-para-granularity: Multiply all access times by 2 - -The following are only applicable to OMAP3+ and AM335x: - - gpmc,wr-access-ns: In synchronous write mode, for single or - burst accesses, defines the number of - GPMC_FCLK cycles from start access time - to the GPMC_CLK rising edge used by the - memory device for the first data capture. - - gpmc,wr-data-mux-bus-ns: In address-data multiplex mode, specifies - the time when the first data is driven on - the address-data bus. - -GPMC chip-select settings properties for child nodes. All are optional. - -- gpmc,burst-length Page/burst length. Must be 4, 8 or 16. -- gpmc,burst-wrap Enables wrap bursting -- gpmc,burst-read Enables read page/burst mode -- gpmc,burst-write Enables write page/burst mode -- gpmc,device-width Total width of device(s) connected to a GPMC - chip-select in bytes. The GPMC supports 8-bit - and 16-bit devices and so this property must be - 1 or 2. -- gpmc,mux-add-data Address and data multiplexing configuration. - Valid values are 1 for address-address-data - multiplexing mode and 2 for address-data - multiplexing mode. -- gpmc,sync-read Enables synchronous read. Defaults to asynchronous - is this is not set. -- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous - is this is not set. -- gpmc,wait-pin Wait-pin used by client. Must be less than - "gpmc,num-waitpins". -- gpmc,wait-on-read Enables wait monitoring on reads. -- gpmc,wait-on-write Enables wait monitoring on writes. - -Example for an AM33xx board: - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x2000>; - interrupts = <100>; - dmas = <&edma 52 0>; - dma-names = "rxtx"; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */ - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - - /* child nodes go here */ - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml new file mode 100644 index 0000000..6e3995b --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml @@ -0,0 +1,245 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: device tree bindings for children of the Texas Instruments GPMC + +maintainers: + - Tony Lindgren + - Roger Quadros + +description: + This binding is meant for the child nodes of the GPMC node. The node + represents any device connected to the GPMC bus. It may be a Flash chip, + RAM chip or Ethernet controller, etc. These properties are meant for + configuring the GPMC settings/timings and will accompany the bindings + supported by the respective device. + +properties: + reg: true + +# GPMC Timing properties for child nodes. All are optional and default to 0. + gpmc,sync-clk-ps: + description: Minimum clock period for synchronous mode + default: 0 + +# Chip-select signal timings corresponding to GPMC_CONFIG2: + gpmc,cs-on-ns: + description: Assertion time + default: 0 + + gpmc,cs-rd-off-ns: + description: Read deassertion time + default: 0 + + gpmc,cs-wr-off-ns: + description: Write deassertion time + default: 0 + +# ADV signal timings corresponding to GPMC_CONFIG3: + gpmc,adv-on-ns: + description: Assertion time + default: 0 + + gpmc,adv-rd-off-ns: + description: Read deassertion time + default: 0 + + gpmc,adv-wr-off-ns: + description: Write deassertion time + default: 0 + + gpmc,adv-aad-mux-on-ns: + description: Assertion time for AAD + default: 0 + + gpmc,adv-aad-mux-rd-off-ns: + description: Read deassertion time for AAD + default: 0 + + gpmc,adv-aad-mux-wr-off-ns: + description: Write deassertion time for AAD + default: 0 + +# WE signals timings corresponding to GPMC_CONFIG4: + gpmc,we-on-ns: + description: Assertion time + default: 0 + + gpmc,we-off-ns: + description: Deassertion time + default: 0 + +# OE signals timings corresponding to GPMC_CONFIG4: + gpmc,oe-on-ns: + description: Assertion time + default: 0 + + gpmc,oe-off-ns: + description: Deassertion time + default: 0 + + gpmc,oe-aad-mux-on-ns: + description: Assertion time for AAD + default: 0 + + gpmc,oe-aad-mux-off-ns: + description: Deassertion time for AAD + default: 0 + +# Access time and cycle time timings (in nanoseconds) corresponding to +# GPMC_CONFIG5: + gpmc,page-burst-access-ns: + description: Multiple access word delay + default: 0 + + gpmc,access-ns: + description: Start-cycle to first data valid delay + default: 0 + + gpmc,rd-cycle-ns: + description: Total read cycle time + default: 0 + + gpmc,wr-cycle-ns: + description: Total write cycle time + default: 0 + + gpmc,bus-turnaround-ns: + description: Turn-around time between successive accesses + default: 0 + + gpmc,cycle2cycle-delay-ns: + description: Delay between chip-select pulses + default: 0 + + gpmc,clk-activation-ns: + description: GPMC clock activation time + default: 0 + + gpmc,wait-monitoring-ns: + description: Start of wait monitoring with regard to valid data + default: 0 + +# Boolean timing parameters. If property is present, parameter is enabled +# otherwise disabled. + gpmc,adv-extra-delay: + description: ADV signal is delayed by half GPMC clock + type: boolean + + gpmc,cs-extra-delay: + description: CS signal is delayed by half GPMC clock + type: boolean + + gpmc,cycle2cycle-diffcsen: + description: | + Add "cycle2cycle-delay" between successive accesses + to a different CS + type: boolean + + gpmc,cycle2cycle-samecsen: + description: | + Add "cycle2cycle-delay" between successive accesses + to the same CS + type: boolean + + gpmc,oe-extra-delay: + description: OE signal is delayed by half GPMC clock + type: boolean + + gpmc,we-extra-delay: + description: WE signal is delayed by half GPMC clock + type: boolean + + gpmc,time-para-granularity: + description: Multiply all access times by 2 + type: boolean + +# The following two properties are applicable only to OMAP3+ and AM335x: + gpmc,wr-access-ns: + description: | + In synchronous write mode, for single or + burst accesses, defines the number of + GPMC_FCLK cycles from start access time + to the GPMC_CLK rising edge used by the + memory device for the first data capture. + default: 0 + + gpmc,wr-data-mux-bus-ns: + description: | + In address-data multiplex mode, specifies + the time when the first data is driven on + the address-data bus. + default: 0 + +# GPMC chip-select settings properties for child nodes. All are optional. + gpmc,burst-length: + description: Page/burst length. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 4, 8, 16] + default: 0 + + gpmc,burst-wrap: + description: Enables wrap bursting + type: boolean + + gpmc,burst-read: + description: Enables read page/burst mode + type: boolean + + gpmc,burst-write: + description: Enables write page/burst mode + type: boolean + + gpmc,device-width: + description: | + Total width of device(s) connected to a GPMC + chip-select in bytes. The GPMC supports 8-bit + and 16-bit devices and so this property must be + 1 or 2. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + default: 1 + + gpmc,mux-add-data: + description: | + Address and data multiplexing configuration. + Valid values are + 0 for Non multiplexed mode + 1 for address-address-data multiplexing mode and + 2 for address-data multiplexing mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + gpmc,sync-read: + description: | + Enables synchronous read. Defaults to asynchronous + is this is not set. + type: boolean + + gpmc,sync-write: + description: | + Enables synchronous writes. Defaults to asynchronous + is this is not set. + type: boolean + + gpmc,wait-pin: + description: | + Wait-pin used by client. Must be less than "gpmc,num-waitpins". + $ref: /schemas/types.yaml#/definitions/uint32 + + gpmc,wait-on-read: + description: Enables wait monitoring on reads. + type: boolean + + gpmc,wait-on-write: + description: Enables wait monitoring on writes. + type: boolean + +required: + - reg + +# the GPMC child will have its own native properties +additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml new file mode 100644 index 0000000..25b42d6 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments GPMC Memory Controller device-tree bindings + +maintainers: + - Tony Lindgren + - Roger Quadros + +description: + The GPMC is a unified memory controller dedicated for interfacing + with external memory devices like + - Asynchronous SRAM-like memories and ASICs + - Asynchronous, synchronous, and page mode burst NOR flash + - NAND flash + - Pseudo-SRAM devices + +properties: + compatible: + items: + - enum: + - ti,am3352-gpmc + - ti,omap2420-gpmc + - ti,omap2430-gpmc + - ti,omap3430-gpmc + - ti,omap4430-gpmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: | + Functional clock. Used for bus timing calculations and + GPMC configuration. + + clock-names: + items: + - const: fck + + dmas: + items: + - description: DMA channel for GPMC NAND prefetch + + dma-names: + items: + - const: rxtx + + "#address-cells": true + + "#size-cells": true + + gpmc,num-cs: + description: maximum number of supported chip-select lines. + $ref: /schemas/types.yaml#/definitions/uint32 + + gpmc,num-waitpins: + description: maximum number of supported wait pins. + $ref: /schemas/types.yaml#/definitions/uint32 + + ranges: + minItems: 1 + description: | + Must be set up to reflect the memory layout with four + integer values for each chip-select line in use, + 0 + items: + - description: NAND bank 0 + - description: NOR/SRAM bank 0 + - description: NOR/SRAM bank 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: + description: | + The GPMC driver implements and interrupt controller for + the NAND events "fifoevent" and "termcount" plus the + rising/falling edges on the GPMC_WAIT pins. + The interrupt number mapping is as follows + 0 - NAND_fifoevent + 1 - NAND_termcount + 2 - GPMC_WAIT0 pin edge + 3 - GPMC_WAIT1 pin edge, and so on. + + '#gpio-cells': + const: 2 + + gpio-controller: + description: | + The GPMC driver implements a GPIO controller for the + GPMC WAIT pins that can be used as general purpose inputs. + 0 maps to GPMC_WAIT0 pin. + + ti,hwmods: + description: + Name of the HWMOD associated with GPMC. This is for legacy + omap2/3 platforms only. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + + ti,no-idle-on-init: + description: + Prevent idling the module at init. This is for legacy omap2/3 + platforms only. + type: boolean + deprecated: true + +patternProperties: + "@[0-7],[a-f0-9]+$": + type: object + description: | + The child device node represents the device connected to the GPMC + bus. The device can be a NAND chip, SRAM device, NOR device + or an ASIC. + + allOf: + - $ref: "ti,gpmc-child.yaml" + + unevaluatedProperties: false + +required: + - compatible + - reg + - gpmc,num-cs + - gpmc,num-waitpins + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include + #include + + gpmc: memory-controller@50000000 { + compatible = "ti,am3352-gpmc"; + reg = <0x50000000 0x2000>; + interrupts = <100>; + clocks = <&l3s_clkctrl>; + clock-names = "fck"; + dmas = <&edma 52 0>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */ + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-xfer-type = "prefetch-dma"; + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt deleted file mode 100644 index c459f16..0000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ /dev/null @@ -1,147 +0,0 @@ -Device tree bindings for GPMC connected NANDs - -GPMC connected NAND (found on OMAP boards) are represented as child nodes of -the GPMC controller with a name of "nand". - -All timing relevant properties as well as generic gpmc child properties are -explained in a separate documents - please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -For NAND specific properties such as ECC modes or bus width, please refer to -Documentation/devicetree/bindings/mtd/nand-controller.yaml - - -Required properties: - - - compatible: "ti,omap2-nand" - - reg: range id (CS number), base offset and length of the - NAND I/O space - - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount. - -Optional properties: - - - nand-bus-width: Set this numeric value to 16 if the hardware - is wired that way. If not specified, a bus - width of 8 is assumed. - - - ti,nand-ecc-opt: A string setting the ECC layout to use. One of: - "sw" 1-bit Hamming ecc code via software - "hw" use "ham1" instead - "hw-romcode" use "ham1" instead - "ham1" 1-bit Hamming ecc code - "bch4" 4-bit BCH ecc code - "bch8" 8-bit BCH ecc code - "bch16" 16-bit BCH ECC code - Refer below "How to select correct ECC scheme for your device ?" - - - ti,nand-xfer-type: A string setting the data transfer type. One of: - - "prefetch-polled" Prefetch polled mode (default) - "polled" Polled mode, without prefetch - "prefetch-dma" Prefetch enabled DMA mode - "prefetch-irq" Prefetch enabled irq mode - - - elm_id: use "ti,elm-id" instead - - ti,elm-id: Specifies phandle of the ELM devicetree node. - ELM is an on-chip hardware engine on TI SoC which is used for - locating ECC errors for BCHx algorithms. SoC devices which have - ELM hardware engines should specify this device node in .dtsi - Using ELM for ECC error correction frees some CPU cycles. - - rb-gpios: GPIO specifier for the ready/busy# pin. - -For inline partition table parsing (optional): - - - #address-cells: should be set to 1 - - #size-cells: should be set to 1 - -Example for an AM33xx board: - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x36c>; - interrupts = <100>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x1000000>; /* CS0 space, 16MB */ - elm_id = <&elm>; - interrupt-controller; - #interrupt-cells = <2>; - - nand@0,0 { - compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* CS0, offset 0, NAND I/O window 4 */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>; - nand-bus-width = <16>; - ti,nand-ecc-opt = "bch8"; - ti,nand-xfer-type = "polled"; - rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ - - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - - /* partitions go here */ - }; - }; - -How to select correct ECC scheme for your device ? --------------------------------------------------- -Higher ECC scheme usually means better protection against bit-flips and -increased system lifetime. However, selection of ECC scheme is dependent -on various other factors also like; - -(1) support of built in hardware engines. - Some legacy OMAP SoC do not have ELM harware engine, so those SoC cannot - support ecc-schemes with hardware error-correction (BCHx_HW). However - such SoC can use ecc-schemes with software library for error-correction - (BCHx_HW_DETECTION_SW). The error correction capability with software - library remains equivalent to their hardware counter-part, but there is - slight CPU penalty when too many bit-flips are detected during reads. - -(2) Device parameters like OOBSIZE. - Other factor which governs the selection of ecc-scheme is oob-size. - Higher ECC schemes require more OOB/Spare area to store ECC syndrome, - so the device should have enough free bytes available its OOB/Spare - area to accommodate ECC for entire page. In general following expression - helps in determining if given device can accommodate ECC syndrome: - "2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE" - where - OOBSIZE number of bytes in OOB/spare area - PAGESIZE number of bytes in main-area of device page - ECC_BYTES number of ECC bytes generated to protect - 512 bytes of data, which is: - '3' for HAM1_xx ecc schemes - '7' for BCH4_xx ecc schemes - '14' for BCH8_xx ecc schemes - '26' for BCH16_xx ecc schemes - - Example(a): For a device with PAGESIZE = 2048 and OOBSIZE = 64 and - trying to use BCH16 (ECC_BYTES=26) ecc-scheme. - Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B - which is greater than capacity of NAND device (OOBSIZE=64) - Hence, BCH16 cannot be supported on given device. But it can - probably use lower ecc-schemes like BCH8. - - Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and - trying to use BCH16 (ECC_BYTES=26) ecc-scheme. - Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B - which can be accommodated in the OOB/Spare area of this device - (OOBSIZE=128). So this device can use BCH16 ecc-scheme. diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt deleted file mode 100644 index 2133be0..0000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ /dev/null @@ -1,98 +0,0 @@ -Device tree bindings for NOR flash connect to TI GPMC - -NOR flash connected to the TI GPMC (found on OMAP boards) are represented as -child nodes of the GPMC controller with a name of "nor". - -All timing relevant properties as well as generic GPMC child properties are -explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Required properties: -- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and - 16-bit devices and so must be either 1 or 2 bytes. -- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml -- gpmc,cs-on-ns: Chip-select assertion time -- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads -- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes -- gpmc,oe-on-ns: Output-enable assertion time -- gpmc,oe-off-ns: Output-enable de-assertion time -- gpmc,we-on-ns Write-enable assertion time -- gpmc,we-off-ns: Write-enable de-assertion time -- gpmc,access-ns: Start cycle to first data capture (read access) -- gpmc,rd-cycle-ns: Total read cycle time -- gpmc,wr-cycle-ns: Total write cycle time -- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml -- reg: Chip-select, base address (relative to chip-select) - and size of NOR flash. Note that base address will be - typically 0 as this is the start of the chip-select. - -Optional properties: -- gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Optional properties for partition table parsing: -- #address-cells: should be set to 1 -- #size-cells: should be set to 1 - -Example: - -gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc", "simple-bus"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <0 0 0x10000000 0x08000000>; - - nor@0,0 { - compatible = "cfi-flash"; - linux,mtd-name= "intel,pf48f6000m0y1be"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0 0 0x08000000>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - - partition@0 { - label = "bootloader-nor"; - reg = <0 0x40000>; - }; - partition@40000 { - label = "params-nor"; - reg = <0x40000 0x40000>; - }; - partition@80000 { - label = "kernel-nor"; - reg = <0x80000 0x200000>; - }; - partition@280000 { - label = "filesystem-nor"; - reg = <0x240000 0x7d80000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt deleted file mode 100644 index e9f01a9..0000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ /dev/null @@ -1,48 +0,0 @@ -Device tree bindings for GPMC connected OneNANDs - -GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of -the GPMC controller with a name of "onenand". - -All timing relevant properties as well as generic gpmc child properties are -explained in a separate documents - please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Required properties: - - - compatible: "ti,omap2-onenand" - - reg: The CS line the peripheral is connected to - - gpmc,device-width: Width of the ONENAND device connected to the GPMC - in bytes. Must be 1 or 2. - -Optional properties: - - - int-gpios: GPIO specifier for the INT pin. - -For inline partition table parsing (optional): - - - #address-cells: should be set to 1 - - #size-cells: should be set to 1 - -Example for an OMAP3430 board: - - gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - onenand@0 { - compatible = "ti,omap2-onenand"; - reg = <0 0 0>; /* CS0, offset 0 */ - gpmc,device-width = <2>; - - #address-cells = <1>; - #size-cells = <1>; - - /* partitions go here */ - }; - }; diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml new file mode 100644 index 0000000..beb26b9 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments GPMC NAND Flash controller. + +maintainers: + - Tony Lindgren + - Roger Quadros + +description: + GPMC NAND controller/Flash is represented as a child of the + GPMC controller node. + +properties: + compatible: + const: ti,omap2-nand + + reg: + maxItems: 1 + + interrupts: + items: + - description: Interrupt for fifoevent + - description: Interrupt for termcount + + "#address-cells": true + + "#size-cells": true + + ti,nand-ecc-opt: + description: Desired ECC algorithm + $ref: /schemas/types.yaml#/definitions/string + enum: [sw, ham1, bch4, bch8, bch16] + + ti,nand-xfer-type: + description: Data transfer method between controller and chip. + $ref: /schemas/types.yaml#/definitions/string + enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq] + default: prefetch-polled + + ti,elm-id: + description: + phandle to the ELM (Error Location Module). + $ref: /schemas/types.yaml#/definitions/phandle + + nand-bus-width: + description: + Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 + +patternProperties: + "@[0-9a-f]+$": + $ref: "/schemas/mtd/partitions/partition.yaml" + +allOf: + - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml" + +required: + - compatible + - reg + - ti,nand-ecc-opt + +unevaluatedProperties: false + +examples: + - | + #include + #include + + gpmc: memory-controller@50000000 { + compatible = "ti,am3352-gpmc"; + dmas = <&edma 52 0>; + dma-names = "rxtx"; + clocks = <&l3s_gclk>; + clock-names = "fck"; + reg = <0x50000000 0x2000>; + interrupts = ; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-xfer-type = "prefetch-dma"; + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + #address-cells = <1>; + #size-cells = <1>; + + /* NAND generic properties */ + nand-bus-width = <8>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + + /* GPMC properties*/ + gpmc,device-width = <1>; + + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x00040000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00040000 0x00040000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml new file mode 100644 index 0000000..a953f73 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,gpmc-onenand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OneNAND over Texas Instruments GPMC bus. + +maintainers: + - Tony Lindgren + - Roger Quadros + +description: + GPMC connected OneNAND (found on OMAP boards) are represented + as child nodes of the GPMC controller. + +properties: + compatible: + const: ti,omap2-onenand + + reg: + items: + - description: | + Chip Select number, register offset and size of + OneNAND register window. + + "#address-cells": true + + "#size-cells": true + + int-gpios: + description: GPIO specifier for the INT pin. + +patternProperties: + "@[0-9a-f]+$": + $ref: "/schemas/mtd/partitions/partition.yaml" + +allOf: + - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml" + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + gpmc: memory-controller@6e000000 { + compatible = "ti,omap3430-gpmc"; + reg = <0x6e000000 0x02d0>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + clocks = <&l3s_clkctrl>; + clock-names = "fck"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ + <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ + + onenand@0,0 { + compatible = "ti,omap2-onenand"; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00100000>; + }; + + partition@100000 { + label = "config"; + reg = <0x00100000 0x002c0000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt deleted file mode 100644 index 3282106..0000000 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ /dev/null @@ -1,97 +0,0 @@ -Device tree bindings for Ethernet chip connected to TI GPMC - -Besides being used to interface with external memory devices, the -General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices -such as ethernet controllers to processors using the TI GPMC as a data bus. - -Ethernet controllers connected to TI GPMC are represented as child nodes of -the GPMC controller with an "ethernet" name. - -All timing relevant properties as well as generic GPMC child properties are -explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -For the properties relevant to the ethernet controller connected to the GPMC -refer to the binding documentation of the device. For example, the documentation -for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml - -Child nodes need to specify the GPMC bus address width using the "bank-width" -property but is possible that an ethernet controller also has a property to -specify the I/O registers address width. Even when the GPMC has a maximum 16-bit -address width, it supports devices with 32-bit word registers. -For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an -OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;". - -Required properties: -- bank-width: Address width of the device in bytes. GPMC supports 8-bit - and 16-bit devices and so must be either 1 or 2 bytes. -- compatible: Compatible string property for the ethernet child device. -- gpmc,cs-on-ns: Chip-select assertion time -- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads -- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes -- gpmc,oe-on-ns: Output-enable assertion time -- gpmc,oe-off-ns: Output-enable de-assertion time -- gpmc,we-on-ns: Write-enable assertion time -- gpmc,we-off-ns: Write-enable de-assertion time -- gpmc,access-ns: Start cycle to first data capture (read access) -- gpmc,rd-cycle-ns: Total read cycle time -- gpmc,wr-cycle-ns: Total write cycle time -- reg: Chip-select, base address (relative to chip-select) - and size of the memory mapped for the device. - Note that base address will be typically 0 as this - is the start of the chip-select. - -Optional properties: -- gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Example: - -gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <5 0 0x2c000000 0x1000000>; - - ethernet@5,0 { - compatible = "smsc,lan9221", "smsc,lan9115"; - reg = <5 0 0xff>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - - interrupt-parent = <&gpio6>; - interrupts = <16>; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; - reg-io-width = <4>; - - smsc,save-mac-address; - }; -}; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt index 6a99d2a..8e4f9bf 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt @@ -197,7 +197,7 @@ Tegra194 RC mode: Tegra194 EP mode: ----------------- - pcie_ep@141a0000 { + pcie-ep@141a0000 { compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt deleted file mode 100644 index f1bbe08..0000000 --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Freescale LINFlexD UART - -The LINFlexD controller implements several LIN protocol versions, as well as -support for full-duplex UART communication through 8-bit and 9-bit frames. - -See chapter 47 ("LINFlexD") in the reference manual[1]. - -Required properties: -- compatible : - - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which - is compatible with the one integrated on S32V234 SoC -- reg : Address and length of the register set for the device -- interrupts : Should contain uart interrupt - -Example: -uart0: serial@40053000 { - compatible = "fsl,s32v234-linflexuart"; - reg = <0x0 0x40053000 0x0 0x1000>; - interrupts = <0 59 4>; -}; - -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml new file mode 100644 index 0000000..8b643ba --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale LINFlexD UART + +description: | + The LINFlexD controller implements several LIN protocol versions, as well + as support for full-duplex UART communication through 8-bit and 9-bit + frames. See chapter 47 ("LINFlexD") in the reference manual + https://www.nxp.com/webapp/Download?colCode=S32V234RM. + +maintainers: + - Chester Lin + +allOf: + - $ref: "serial.yaml" + +properties: + compatible: + oneOf: + - const: fsl,s32v234-linflexuart + - items: + - const: nxp,s32g2-linflexuart + - const: fsl,s32v234-linflexuart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + serial@40053000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x40053000 0x1000>; + interrupts = <0 59 4>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml new file mode 100644 index 0000000..ecd86cf --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MM DISP blk-ctrl + +maintainers: + - Lucas Stach + +description: + The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display and MIPI CSI + peripherals located in the DISP domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mm-disp-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 5 + maxItems: 5 + + power-domain-names: + items: + - const: bus + - const: csi-bridge + - const: lcdif + - const: mipi-dsi + - const: mipi-csi + + clocks: + minItems: 10 + maxItems: 10 + + clock-names: + items: + - const: csi-bridge-axi + - const: csi-bridge-apb + - const: csi-bridge-core + - const: lcdif-axi + - const: lcdif-apb + - const: lcdif-pix + - const: dsi-pclk + - const: dsi-ref + - const: csi-aclk + - const: csi-pclk + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + + disp_blk_ctl: blk_ctrl@32e28000 { + compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_mipi>, <&pgc_mipi>; + power-domain-names = "bus", "csi-bridge", "lcdif", + "mipi-dsi", "mipi-csi"; + clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_ROOT>, + <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>, + <&clk IMX8MM_CLK_CSI1_CORE>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>; + clock-names = "csi-bridge-axi", "csi-bridge-apb", "csi-bridge-core", + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk", + "dsi-ref", "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml new file mode 100644 index 0000000..26487da --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MM VPU blk-ctrl + +maintainers: + - Lucas Stach + +description: + The i.MX8MM VPU blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the VPU peripherals + located in the VPU domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mm-vpu-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 4 + maxItems: 4 + + power-domain-names: + items: + - const: bus + - const: g1 + - const: g2 + - const: h1 + + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + items: + - const: g1 + - const: g2 + - const: h1 + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + + vpu_blk_ctrl: blk-ctrl@38330000 { + compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon"; + reg = <0x38330000 0x100>; + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, + <&pgc_vpu_g2>, <&pgc_vpu_h1>; + power-domain-names = "bus", "g1", "g2", "h1"; + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>, + <&clk IMX8MM_CLK_VPU_G2_ROOT>, + <&clk IMX8MM_CLK_VPU_H1_ROOT>; + clock-names = "g1", "g2", "h1"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index 39b66e9..7d48ea0 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -21,6 +21,9 @@ properties: - const: allwinner,sun8i-a83t-i2s - const: allwinner,sun8i-h3-i2s - items: + - const: allwinner,sun8i-r40-i2s + - const: allwinner,sun8i-h3-i2s + - items: - const: allwinner,sun8i-v3-i2s - const: allwinner,sun8i-h3-i2s - const: allwinner,sun50i-a64-codec-i2s diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index a826ac7..518487e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -193,6 +193,8 @@ patternProperties: description: B&R Industrial Automation GmbH "^bticino,.*": description: Bticino International + "^calamp,.*": + description: CalAmp Corp. "^calaosystems,.*": description: CALAO Systems SAS "^calxeda,.*": @@ -337,6 +339,8 @@ patternProperties: description: EBV Elektronik "^eckelmann,.*": description: Eckelmann AG + "^edimax,.*": + description: EDIMAX Technology Co., Ltd "^edt,.*": description: Emerging Display Technologies "^eeti,.*": @@ -397,6 +401,8 @@ patternProperties: description: Exar Corporation "^excito,.*": description: Excito + "^exegin,.*": + description: Exegin Technologies Limited "^ezchip,.*": description: EZchip Semiconductor "^facebook,.*": @@ -581,6 +587,8 @@ patternProperties: description: JEDEC Solid State Technology Association "^jesurun,.*": description: Shenzhen Jesurun Electronics Business Dept. + "^jethome,.*": + description: JetHome (IP Sokolov P.A.) "^jianda,.*": description: Jiandangjing Technology Co., Ltd. "^kam,.*": @@ -1108,6 +1116,8 @@ patternProperties: description: SpinalHDL "^sprd,.*": description: Spreadtrum Communications Inc. + "^ssi,.*": + description: SSI Computer Corp "^sst,.*": description: Silicon Storage Technology, Inc. "^sstar,.*": diff --git a/MAINTAINERS b/MAINTAINERS index 0f0b487..8332133 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6352,6 +6352,7 @@ L: linux-tegra@vger.kernel.org S: Supported T: git git://anongit.freedesktop.org/tegra/linux.git F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +F: Documentation/devicetree/bindings/gpu/host1x/ F: drivers/gpu/drm/tegra/ F: drivers/gpu/host1x/ F: include/linux/host1x.h diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7e09341..0de64f2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -25,6 +25,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ usb_a9263.dtb \ at91-foxg20.dtb \ at91-kizbox.dtb \ + at91-lmu5000.dtb \ at91sam9g20ek.dtb \ at91sam9g20ek_2mmc.dtb \ tny_a9g20.dtb \ @@ -40,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-kizboxmini-base.dtb \ at91-kizboxmini-mb.dtb \ at91-kizboxmini-rd.dtb \ + at91-q5xr5.dtb \ at91-smartkiz.dtb \ at91-wb45n.dtb \ at91sam9g15ek.dtb \ @@ -92,6 +94,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2837-rpi-cm3-io3.dtb \ bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ + bcm2711-rpi-cm4-io.dtb \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ @@ -117,6 +120,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb \ bcm4709-tplink-archer-c9-v1.dtb \ + bcm47094-asus-rt-ac88u.dtb \ bcm47094-dlink-dir-885l.dtb \ bcm47094-linksys-panamera.dtb \ bcm47094-luxul-abr-4500.dtb \ @@ -157,6 +161,12 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \ bcm958525xmc.dtb \ bcm958622hr.dtb \ bcm958623hr.dtb \ + bcm958625-meraki-mx64.dtb \ + bcm958625-meraki-mx64-a0.dtb \ + bcm958625-meraki-mx64w.dtb \ + bcm958625-meraki-mx64w-a0.dtb \ + bcm958625-meraki-mx65.dtb \ + bcm958625-meraki-mx65w.dtb \ bcm958625hr.dtb \ bcm988312hr.dtb \ bcm958625k.dtb @@ -219,9 +229,11 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dir-685.dtb \ gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ + gemini-ns2502.dtb \ gemini-rut1xx.dtb \ gemini-sl93512r.dtb \ gemini-sq201.dtb \ + gemini-ssi1328.dtb \ gemini-wbd111.dtb \ gemini-wbd222.dtb dtb-$(CONFIG_ARCH_HI3xxx) += \ @@ -635,10 +647,12 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-tolino-shine2hd.dtb \ imx6sl-tolino-shine3.dtb \ + imx6sl-tolino-vision5.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ imx6sll-evk.dtb \ - imx6sll-kobo-clarahd.dtb + imx6sll-kobo-clarahd.dtb \ + imx6sll-kobo-librah2o.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ @@ -671,6 +685,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ imx6ull-14x14-evk.dtb \ + imx6ull-colibri-emmc-eval-v3.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ @@ -939,6 +954,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ ox810se-wd-mbwe.dtb \ ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8026-lg-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ @@ -959,6 +975,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-rb3011.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ + qcom-msm8916-samsung-serranove.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ @@ -1075,6 +1092,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ + socfpga_arria10_mercury_aa1.dtb \ socfpga_arria10_socdk_nand.dtb \ socfpga_arria10_socdk_qspi.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ @@ -1113,6 +1131,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ + stm32mp135f-dk.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ @@ -1387,6 +1406,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ + armada-381-netgear-gs110emx.dtb \ armada-382-rd-ac3x-48g4x2xl.dtb \ armada-385-atl-x530.dtb\ armada-385-clearfog-gtr-s4.dtb \ @@ -1497,4 +1517,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \ aspeed-bmc-quanta-q71l.dtb \ - aspeed-bmc-supermicro-x11spi.dtb + aspeed-bmc-supermicro-x11spi.dtb \ + aspeed-bmc-inventec-transformers.dtb \ + aspeed-bmc-tyan-s7106.dtb diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 209cdd1..5e415d8 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -205,6 +205,7 @@ &am33xx_pinmux { + compatible = "pinconf-single"; pinctrl-names = "default"; pinctrl-0 = < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi index 04e8a27..2dfb32b 100644 --- a/arch/arm/boot/dts/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -198,96 +198,112 @@ syscon: syscon@10000000 { compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; + ranges = <0x0 0x10000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; - led@08.0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "versatile:7"; default-state = "off"; }; - oscclk0: osc0@0c { + oscclk0: clock-controller@c { compatible = "arm,syscon-icst307"; + reg = <0x0c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x0C>; clocks = <&xtal24mhz>; }; - oscclk1: osc1@10 { + oscclk1: clock-controller@10 { compatible = "arm,syscon-icst307"; + reg = <0x10 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x10>; clocks = <&xtal24mhz>; }; - oscclk2: osc2@14 { + oscclk2: clock-controller@14 { compatible = "arm,syscon-icst307"; + reg = <0x14 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x14>; clocks = <&xtal24mhz>; }; - oscclk3: osc3@18 { + oscclk3: clock-controller@18 { compatible = "arm,syscon-icst307"; + reg = <0x18 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x18>; clocks = <&xtal24mhz>; }; - oscclk4: osc4@1c { + oscclk4: clock-controller@1c { compatible = "arm,syscon-icst307"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x1c>; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 366687f..06b8723 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -216,96 +216,112 @@ syscon: syscon@10000000 { compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; + ranges = <0x0 0x10000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; - led@08.0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "versatile:7"; default-state = "off"; }; - oscclk0: osc0@0c { + oscclk0: clock-controller@c { compatible = "arm,syscon-icst307"; + reg = <0x0c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x0C>; clocks = <&xtal24mhz>; }; - oscclk1: osc1@10 { + oscclk1: clock-controller@10 { compatible = "arm,syscon-icst307"; + reg = <0x10 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x10>; clocks = <&xtal24mhz>; }; - oscclk2: osc2@14 { + oscclk2: clock-controller@14 { compatible = "arm,syscon-icst307"; + reg = <0x14 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x14>; clocks = <&xtal24mhz>; }; - oscclk3: osc3@18 { + oscclk3: clock-controller@18 { compatible = "arm,syscon-icst307"; + reg = <0x18 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x18>; clocks = <&xtal24mhz>; }; - oscclk4: osc4@1c { + oscclk4: clock-controller@1c { compatible = "arm,syscon-icst307"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x1c>; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 228a51a..295aef4 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -303,114 +303,132 @@ pb11mp_syscon: syscon@10000000 { compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; + ranges = <0x0 0x10000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; - led@08.0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "versatile:3"; linux,default-trigger = "cpu1"; default-state = "off"; }; - led@08.4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "versatile:4"; linux,default-trigger = "cpu2"; default-state = "off"; }; - led@08.5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "versatile:5"; linux,default-trigger = "cpu3"; default-state = "off"; }; - led@08.6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "versatile:7"; default-state = "off"; }; - oscclk0: osc0@0c { + oscclk0: clock-controller@c { compatible = "arm,syscon-icst307"; + reg = <0x0c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x0C>; clocks = <&xtal24mhz>; }; - oscclk1: osc1@10 { + oscclk1: clock-controller@10 { compatible = "arm,syscon-icst307"; + reg = <0x10 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x10>; clocks = <&xtal24mhz>; }; - oscclk2: osc2@14 { + oscclk2: clock-controller@14 { compatible = "arm,syscon-icst307"; + reg = <0x14 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x14>; clocks = <&xtal24mhz>; }; - oscclk3: osc3@18 { + oscclk3: clock-controller@18 { compatible = "arm,syscon-icst307"; + reg = <0x18 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x18>; clocks = <&xtal24mhz>; }; - oscclk4: osc4@1c { + oscclk4: clock-controller@1c { compatible = "arm,syscon-icst307"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x1c>; clocks = <&xtal24mhz>; }; - oscclk5: osc5@d4 { + oscclk5: clock-controller@d4 { compatible = "arm,syscon-icst307"; + reg = <0xd4 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0xd4>; clocks = <&xtal24mhz>; }; - oscclk6: osc6@d8 { + oscclk6: clock-controller@d8 { compatible = "arm,syscon-icst307"; + reg = <0xd8 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0xd8>; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index ccf6f75..6f61f96 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -220,96 +220,112 @@ syscon: syscon@10000000 { compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; + ranges = <0x0 0x10000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; - led@08.0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "versatile:7"; default-state = "off"; }; - oscclk0: osc0@0c { + oscclk0: clock-controller@c { compatible = "arm,syscon-icst307"; + reg = <0x0c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x0C>; clocks = <&xtal24mhz>; }; - oscclk1: osc1@10 { + oscclk1: clock-controller@10 { compatible = "arm,syscon-icst307"; + reg = <0x10 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x10>; clocks = <&xtal24mhz>; }; - oscclk2: osc2@14 { + oscclk2: clock-controller@14 { compatible = "arm,syscon-icst307"; + reg = <0x14 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x14>; clocks = <&xtal24mhz>; }; - oscclk3: osc3@18 { + oscclk3: clock-controller@18 { compatible = "arm,syscon-icst307"; + reg = <0x18 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x18>; clocks = <&xtal24mhz>; }; - oscclk4: osc4@1c { + oscclk4: clock-controller@1c { compatible = "arm,syscon-icst307"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x1c>; diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts new file mode 100644 index 0000000..0a96111 --- /dev/null +++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2021, Marcel Ziswiler */ + +/dts-v1/; +#include "armada-385.dtsi" +#include +#include + +/ { + model = "Netgear GS110EMX"; + compatible = "netgear,gs110emx", "marvell,armada380"; + + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&front_button_pins>; + pinctrl-names = "default"; + + factory_default { + label = "Factory Default"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; /* 128 MB */ + }; + + soc { + ranges = ; + + internal-regs { + rtc@a3800 { + /* + * If the rtc doesn't work, run "date reset" + * twice in u-boot. + */ + status = "okay"; + }; + }; + }; +}; + +ð0 { + /* ethernet@70000 */ + bm,pool-long = <0>; + bm,pool-short = <1>; + buffer-manager = <&bm>; + phy-mode = "rgmii-id"; + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + + fixed-link { + full-duplex; + pause; + speed = <1000>; + }; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&switch_interrupt_pins>; + pinctrl-names = "default"; + #size-cells = <0>; + reg = <0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: switch0phy1@1 { + reg = <0x1>; + }; + + switch0phy2: switch0phy2@2 { + reg = <0x2>; + }; + + switch0phy3: switch0phy3@3 { + reg = <0x3>; + }; + + switch0phy4: switch0phy4@4 { + reg = <0x4>; + }; + + switch0phy5: switch0phy5@5 { + reg = <0x5>; + }; + + switch0phy6: switch0phy6@6 { + reg = <0x6>; + }; + + switch0phy7: switch0phy7@7 { + reg = <0x7>; + }; + + switch0phy8: switch0phy8@8 { + reg = <0x8>; + }; + }; + + mdio-external { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@b { + reg = <0xb>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + phy2: ethernet-phy@c { + reg = <0xc>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + ethernet = <ð0>; + label = "cpu"; + reg = <0>; + + fixed-link { + full-duplex; + pause; + speed = <1000>; + }; + }; + + port@1 { + label = "lan1"; + phy-handle = <&switch0phy1>; + reg = <1>; + }; + + port@2 { + label = "lan2"; + phy-handle = <&switch0phy2>; + reg = <2>; + }; + + port@3 { + label = "lan3"; + phy-handle = <&switch0phy3>; + reg = <3>; + }; + + port@4 { + label = "lan4"; + phy-handle = <&switch0phy4>; + reg = <4>; + }; + + port@5 { + label = "lan5"; + phy-handle = <&switch0phy5>; + reg = <5>; + }; + + port@6 { + label = "lan6"; + phy-handle = <&switch0phy6>; + reg = <6>; + }; + + port@7 { + label = "lan7"; + phy-handle = <&switch0phy7>; + reg = <7>; + }; + + port@8 { + label = "lan8"; + phy-handle = <&switch0phy8>; + reg = <8>; + }; + + port@9 { + /* 88X3310P external phy */ + label = "lan9"; + phy-handle = <&phy1>; + phy-mode = "xaui"; + reg = <9>; + }; + + port@a { + /* 88X3310P external phy */ + label = "lan10"; + phy-handle = <&phy2>; + phy-mode = "xaui"; + reg = <0xa>; + }; + }; + }; +}; + +&pinctrl { + front_button_pins: front-button-pins { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + switch_interrupt_pins: switch-interrupt-pins { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; +}; + +&spi0 { + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + read-only; + reg = <0x00000000 0x00100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x00100000 0x00010000>; + }; + + partition@200000 { + label = "rsv"; + reg = <0x00110000 0x00010000>; + }; + + partition@300000 { + label = "image0"; + reg = <0x00120000 0x00900000>; + }; + + partition@400000 { + label = "config"; + reg = <0x00a20000 0x00300000>; + }; + + partition@480000 { + label = "debug"; + reg = <0x00d20000 0x002e0000>; + }; + }; + }; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts index 79d1784..6406a0f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts @@ -159,6 +159,11 @@ //24LC128 EEPROM &i2c3 { status = "okay"; + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; }; //P0 Power regulators diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index 57b0c45..3515d55 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -86,6 +86,18 @@ linux,code = ; }; + S0_scp_auth_fail { + label = "S0_SCP_AUTH_FAIL"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + S1_scp_auth_fail { + label = "S1_SCP_AUTH_FAIL"; + gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + S1_overtemp { label = "S1_OVERTEMP"; gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; @@ -590,7 +602,7 @@ /*Q0-Q7*/ "","","","","","UID_BUTTON","","", /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN", "OCP_MAIN_PWREN","RESET_BUTTON","","", - /*S0-S7*/ "","","","","","","","", + /*S0-S7*/ "","","","","RTC_BAT_SEN_EN","","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", /*V0-V7*/ "","","","","","","","", @@ -604,4 +616,11 @@ "S1_BMC_DDR_ADR","","","","", /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L", "BMC_OCP_PG"; + + i2c4_o_en { + gpio-hog; + gpios = ; + output-high; + line-name = "BMC_I2C4_O_EN"; + }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index 2efd706..f42e2d7 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -96,6 +96,20 @@ i2c32 = &i2c14mux1chn1; i2c33 = &i2c14mux1chn2; i2c34 = &i2c14mux1chn3; + i2c35 = &i2c15mux0chn0; + i2c36 = &i2c15mux0chn1; + i2c37 = &i2c15mux0chn2; + i2c38 = &i2c15mux0chn3; + i2c39 = &i2c15mux1chn0; + i2c40 = &i2c15mux1chn1; + i2c41 = &i2c15mux1chn2; + i2c42 = &i2c15mux1chn3; + i2c43 = &i2c15mux2chn0; + i2c44 = &i2c15mux2chn1; + i2c45 = &i2c15mux2chn2; + i2c46 = &i2c15mux2chn3; + i2c47 = &i2c8mux0chn0; + i2c48 = &i2c8mux0chn1; serial4 = &uart5; @@ -231,20 +245,36 @@ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; }; }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; +}; + +&adc1 { + status = "okay"; + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; }; &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","", - /*B0-B7*/ "USERSPACE_RSTIND_BUFF","","","","","","","", + /*B0-B7*/ "USERSPACE_RSTIND_BUFF","","","","","","checkstop","", /*C0-C7*/ "","","","","","","","", /*D0-D7*/ "","","","","","","","", /*E0-E7*/ "","","","","","","","", /*F0-F7*/ "PIN_HOLE_RESET_IN_N","","", - "PIN_HOLE_RESET_OUT_N","","","","", + "PIN_HOLE_RESET_OUT_N","","", + "factory-reset-toggle","", /*G0-G7*/ "","","","","","","","", /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","", - /*I0-I7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", /*L0-L7*/ "","","","","","","","", @@ -252,7 +282,7 @@ /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","","","","","", /*P0-P7*/ "","","","","led-pcieslot-power","","","", - /*Q0-Q7*/ "","","","","","","","", + /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","", /*S0-S7*/ "","","","","","","","", /*T0-T7*/ "","","","","","","","", @@ -297,86 +327,6 @@ "presence-lcd-op", "presence-base-op", ""; - - gpio@0 { - reg = <0>; - type = ; - }; - - gpio@1 { - reg = <1>; - type = ; - }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; - - gpio@8 { - reg = <8>; - type = ; - }; - - gpio@9 { - reg = <9>; - type = ; - }; - - gpio@10 { - reg = <10>; - type = ; - }; - - gpio@11 { - reg = <11>; - type = ; - }; - - gpio@12 { - reg = <12>; - type = ; - }; - - gpio@13 { - reg = <13>; - type = ; - }; - - gpio@14 { - reg = <14>; - type = ; - }; - - gpio@15 { - reg = <15>; - type = ; - }; }; }; @@ -440,56 +390,6 @@ "expander-cable-card3", "expander-cable-card4", "expander-cable-card5"; - - gpio@0 { - reg = <0>; - type = ; - }; - - gpio@1 { - reg = <1>; - type = ; - }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; - - gpio@8 { - reg = <8>; - type = ; - }; - - gpio@9 { - reg = <9>; - type = ; - }; }; i2c-switch@70 { @@ -533,36 +433,6 @@ default-state = "keep"; type = ; }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; @@ -599,36 +469,6 @@ default-state = "keep"; type = ; }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; @@ -665,36 +505,6 @@ default-state = "keep"; type = ; }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; }; @@ -725,67 +535,6 @@ "expander-cable-card9", "expander-cable-card10", "expander-cable-card11"; - - gpio@0 { - reg = <0>; - type = ; - }; - - gpio@1 { - reg = <1>; - type = ; - }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; - - gpio@8 { - reg = <8>; - type = ; - }; - - gpio@9 { - reg = <9>; - type = ; - }; - - gpio@10 { - reg = <10>; - type = ; - }; - - gpio@11 { - reg = <11>; - type = ; - }; - }; i2c-switch@70 { @@ -829,36 +578,6 @@ default-state = "keep"; type = ; }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; @@ -895,36 +614,6 @@ default-state = "keep"; type = ; }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; @@ -961,36 +650,6 @@ default-state = "keep"; type = ; }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; @@ -1027,36 +686,6 @@ default-state = "keep"; type = ; }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; }; @@ -1106,36 +735,6 @@ default-state = "keep"; type = ; }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; @@ -1172,36 +771,6 @@ default-state = "keep"; type = ; }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; @@ -1233,40 +802,10 @@ led@1 { label = "cablecard-c10-cxp-bot"; - reg = <1>; - retain-state-shutdown; - default-state = "keep"; - type = ; - }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; }; }; }; @@ -1304,36 +843,6 @@ default-state = "keep"; type = ; }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; }; @@ -1347,11 +856,6 @@ gpio-controller; #gpio-cells = <2>; - gpio@0 { - reg = <0>; - type = ; - }; - led@1 { label = "pcieslot-c01"; reg = <1>; @@ -1439,26 +943,6 @@ default-state = "keep"; type = ; }; - - gpio@12 { - reg = <12>; - type = ; - }; - - gpio@13 { - reg = <13>; - type = ; - }; - - gpio@14 { - reg = <14>; - type = ; - }; - - gpio@15 { - reg = <15>; - type = ; - }; }; }; @@ -2082,11 +1566,6 @@ type = ; }; - gpio@7 { - reg = <7>; - type = ; - }; - led@8 { label = "vrm4"; reg = <8>; @@ -2217,11 +1696,6 @@ type = ; }; - gpio@7 { - reg = <7>; - type = ; - }; - led@8 { label = "vrm0"; reg = <8>; @@ -2310,6 +1784,27 @@ compatible = "atmel,24c128"; reg = <0x50>; }; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c8mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c8mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; }; &i2c9 { @@ -2413,15 +1908,21 @@ }; &i2c14 { + multi-master; status = "okay"; + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + i2c-switch@70 { compatible = "nxp,pca9546"; reg = <0x70>; #address-cells = <1>; #size-cells = <0>; status = "okay"; - i2c-mux-idle-disconnect; + idle-state = <1>; i2c14mux0chn0: i2c@0 { #address-cells = <1>; @@ -2651,16 +2152,6 @@ default-state = "keep"; type = ; }; - - gpio@14 { - reg = <14>; - type = ; - }; - - gpio@15 { - reg = <15>; - type = ; - }; }; pca0: pca9552@61 { @@ -2680,86 +2171,6 @@ "presence-fan2", "presence-fan1", "presence-fan0"; - - gpio@0 { - reg = <0>; - type = ; - }; - - gpio@1 { - reg = <1>; - type = ; - }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; - - gpio@8 { - reg = <8>; - type = ; - }; - - gpio@9 { - reg = <9>; - type = ; - }; - - gpio@10 { - reg = <10>; - type = ; - }; - - gpio@11 { - reg = <11>; - type = ; - }; - - gpio@12 { - reg = <12>; - type = ; - }; - - gpio@13 { - reg = <13>; - type = ; - }; - - gpio@14 { - reg = <14>; - type = ; - }; - - gpio@15 { - reg = <15>; - type = ; - }; }; }; }; @@ -2816,6 +2227,152 @@ &i2c15 { status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + }; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux1chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + }; + + i2c-switch@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux2chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux2chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux2chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c15mux2chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; }; &ehci1 { @@ -4050,11 +3607,6 @@ memory-region = <&flash_memory>; }; -&kcs4 { - compatible = "openbmc,mctp-lpc"; - status = "okay"; -}; - &mac2 { status = "okay"; pinctrl-names = "default"; @@ -4093,3 +3645,14 @@ status = "okay"; memory-region = <&vga_memory>; }; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 6419c97..866f32c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -82,7 +82,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200n8"; + bootargs = "console=ttyS4,115200n8 earlycon"; }; memory@80000000 { @@ -116,34 +116,6 @@ }; }; - gpio-keys { - compatible = "gpio-keys"; - - ps0-presence { - label = "ps0-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ps1-presence { - label = "ps1-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ps2-presence { - label = "ps2-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ps3-presence { - label = "ps3-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - i2c2mux: i2cmux { compatible = "i2c-mux-gpio"; #address-cells = <1>; @@ -246,6 +218,21 @@ linux,code = <11>; }; }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; +}; + +&adc1 { + status = "okay"; + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; }; &ehci1 { @@ -259,10 +246,10 @@ /*C0-C7*/ "","","","","","","","", /*D0-D7*/ "","","","","","","","", /*E0-E7*/ "","","","","","","","", - /*F0-F7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","factory-reset-toggle","", /*G0-G7*/ "","","","","","","","", /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", - /*I0-I7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", /*L0-L7*/ "","","","","","","","", @@ -270,7 +257,7 @@ /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","usb-power","","","","", /*P0-P7*/ "","","","","pcieslot-power","","","", - /*Q0-Q7*/ "cfam-reset","","","","","","","", + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", "","","","", @@ -282,13 +269,6 @@ /*Y0-Y7*/ "","","","","","","","", /*Z0-Z7*/ "","","","","","","",""; - pin_mclr_vpp { - gpio-hog; - gpios = ; - output-high; - line-name = "mclr_vpp"; - }; - i2c3_mux_oe_n { gpio-hog; gpios = ; @@ -945,46 +925,6 @@ "DASD_BP2_PRESENT_N", "DASD_BP1_PRESENT_N", "DASD_BP0_PRESENT_N"; - - gpio@0 { - reg = <0>; - type = ; - }; - - gpio@1 { - reg = <1>; - type = ; - }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; }; }; @@ -1025,86 +965,6 @@ "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N", "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N", "", "", "", "", "", ""; - - gpio@0 { - reg = <0>; - type = ; - }; - - gpio@1 { - reg = <1>; - type = ; - }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; - - gpio@8 { - reg = <8>; - type = ; - }; - - gpio@9 { - reg = <9>; - type = ; - }; - - gpio@10 { - reg = <10>; - type = ; - }; - - gpio@11 { - reg = <11>; - type = ; - }; - - gpio@12 { - reg = <12>; - type = ; - }; - - gpio@13 { - reg = <13>; - type = ; - }; - - gpio@14 { - reg = <14>; - type = ; - }; - - gpio@15 { - reg = <15>; - type = ; - }; }; }; @@ -1126,6 +986,32 @@ reg = <0x4a>; }; + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard0-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "cablecard0-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + pca9546@70 { compatible = "nxp,pca9546"; reg = <0x70>; @@ -1182,6 +1068,58 @@ reg = <0x49>; }; + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard3-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "cablecard3-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + + pca9551@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard4-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "cablecard4-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + pca9546@70 { compatible = "nxp,pca9546"; reg = <0x70>; @@ -1290,313 +1228,736 @@ multi-master; status = "okay"; - si7021-a20@40 { - compatible = "silabs,si7020"; - reg = <0x40>; - }; - - tmp275@48 { - compatible = "ti,tmp275"; - reg = <0x48>; - }; - - max: max31785@52 { - compatible = "maxim,max31785a"; - reg = <0x52>; + pca9552@30 { + compatible = "ibm,pca9552"; + reg = <0x30>; #address-cells = <1>; #size-cells = <0>; - fan0: fan@0 { - compatible = "pmbus-fan"; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "pcieslot0"; reg = <0>; - tach-pulses = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - fan1: fan@1 { - compatible = "pmbus-fan"; + led@1 { + label = "pcieslot1"; reg = <1>; - tach-pulses = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - fan2: fan@2 { - compatible = "pmbus-fan"; + led@2 { + label = "pcieslot2"; reg = <2>; - tach-pulses = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - fan3: fan@3 { - compatible = "pmbus-fan"; + led@3 { + label = "pcieslot3"; reg = <3>; - tach-pulses = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - fan4: fan@4 { - compatible = "pmbus-fan"; + led@4 { + label = "pcieslot4"; reg = <4>; - tach-pulses = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - fan5: fan@5 { - compatible = "pmbus-fan"; + led@5 { + label = "cpu1"; reg = <5>; - tach-pulses = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "cpu-vrm1"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@8 { + label = "lcd-russel"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = ; }; }; - pca0: pca9552@61 { - compatible = "nxp,pca9552"; - reg = <0x61>; + pca9552@31 { + compatible = "ibm,pca9552"; + reg = <0x31>; #address-cells = <1>; #size-cells = <0>; gpio-controller; #gpio-cells = <2>; - gpio@0 { + led@0 { + label = "ddimm0"; reg = <0>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@1 { + led@1 { + label = "ddimm1"; reg = <1>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@2 { + led@2 { + label = "ddimm2"; reg = <2>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@3 { + led@3 { + label = "ddimm3"; reg = <3>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@4 { + led@4 { + label = "ddimm4"; reg = <4>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@5 { + led@5 { + label = "ddimm5"; reg = <5>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@6 { + led@6 { + label = "ddimm6"; reg = <6>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@7 { + led@7 { + label = "ddimm7"; reg = <7>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@8 { + led@8 { + label = "ddimm8"; reg = <8>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@9 { + led@9 { + label = "ddimm9"; reg = <9>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@10 { + led@10 { + label = "ddimm10"; reg = <10>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@11 { + led@11 { + label = "ddimm11"; reg = <11>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@12 { + led@12 { + label = "ddimm12"; reg = <12>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@13 { + led@13 { + label = "ddimm13"; reg = <13>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@14 { + led@14 { + label = "ddimm14"; reg = <14>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@15 { + led@15 { + label = "ddimm15"; reg = <15>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; }; - ibm-panel@62 { - compatible = "ibm,op-panel"; - reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; - }; - - dps: dps310@76 { - compatible = "infineon,dps310"; - reg = <0x76>; - #io-channel-cells = <0>; - }; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; - }; -}; - -&i2c8 { - status = "okay"; - - ucd90320@11 { - compatible = "ti,ucd90320"; - reg = <0x11>; - }; - - rtc@32 { - compatible = "epson,rx8900"; + pca9552@32 { + compatible = "ibm,pca9552"; reg = <0x32>; - }; - - tmp275@48 { - compatible = "ti,tmp275"; - reg = <0x48>; - }; - - tmp275@4a { - compatible = "ti,tmp275"; - reg = <0x4a>; - }; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; - }; - - pca_pres2: pca9552@61 { - compatible = "nxp,pca9552"; - reg = <0x61>; #address-cells = <1>; #size-cells = <0>; + gpio-controller; #gpio-cells = <2>; - gpio-line-names = - "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD", - "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD", - "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD", - "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N", - "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N", - "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N", - "", "", "", ""; - - gpio@0 { + led@0 { + label = "ddimm16"; reg = <0>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@1 { + led@1 { + label = "ddimm17"; reg = <1>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@2 { + led@2 { + label = "ddimm18"; reg = <2>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@3 { + led@3 { + label = "ddimm19"; reg = <3>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@4 { + led@4 { + label = "ddimm20"; reg = <4>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@5 { + led@5 { + label = "ddimm21"; reg = <5>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@6 { + led@6 { + label = "ddimm22"; reg = <6>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@7 { + led@7 { + label = "ddimm23"; reg = <7>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@8 { + led@8 { + label = "ddimm24"; reg = <8>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@9 { + led@9 { + label = "ddimm25"; reg = <9>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@10 { + led@10 { + label = "ddimm26"; reg = <10>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@11 { + led@11 { + label = "ddimm27"; reg = <11>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@12 { + led@12 { + label = "ddimm28"; reg = <12>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@13 { + led@13 { + label = "ddimm29"; reg = <13>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@14 { + led@14 { + label = "ddimm30"; reg = <14>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; - gpio@15 { + led@15 { + label = "ddimm31"; reg = <15>; - type = ; + retain-state-shutdown; + default-state = "keep"; + type = ; }; }; -}; + pca9552@33 { + compatible = "ibm,pca9552"; + reg = <0x33>; + #address-cells = <1>; + #size-cells = <0>; -&i2c9 { - status = "okay"; + gpio-controller; + #gpio-cells = <2>; - tmp423a@4c { - compatible = "ti,tmp423"; - reg = <0x4c>; - }; + led@0 { + label = "planar"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; - tmp423b@4d { + led@1 { + label = "cpu0"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "dasd-pyramid0"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "dasd-pyramid1"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "dasd-pyramid2"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "cpu0-vrm0"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@7 { + label = "rtc-battery"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@8 { + label = "base-blyth"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@9 { + label = "pcieslot6"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@10 { + label = "pcieslot7"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@11 { + label = "pcieslot8"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@12 { + label = "pcieslot9"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@13 { + label = "pcieslot10"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@14 { + label = "pcieslot11"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@15 { + label = "tpm-wilson"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + + si7021-a20@40 { + compatible = "silabs,si7020"; + reg = <0x40>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + max: max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan0: fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + }; + + fan1: fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + }; + + fan2: fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + }; + + fan3: fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + }; + + fan4: fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + }; + + fan5: fan@5 { + compatible = "pmbus-fan"; + reg = <5>; + tach-pulses = <2>; + }; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "front-sys-id0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "front-check-log0"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "front-enc-fault1"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "front-sys-pwron0"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + + pca0: pca9552@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "fan0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "fan1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "fan2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "fan3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "fan4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "fan5"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c8 { + status = "okay"; + + ucd90320@11 { + compatible = "ti,ucd90320"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + pca_pres3: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "power-config-full-load", ""; + }; + + pca_pres2: pca9552@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD", + "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD", + "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD", + "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N", + "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N", + "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N", + "", "", "", ""; + }; + +}; + +&i2c9 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { compatible = "ti,tmp423"; reg = <0x4d>; }; @@ -1639,6 +2000,32 @@ reg = <0x49>; }; + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard10-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "cablecard10-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + pca9546@70 { compatible = "nxp,pca9546"; reg = <0x70>; @@ -1673,6 +2060,11 @@ &i2c12 { status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; }; &i2c13 { @@ -1682,6 +2074,80 @@ compatible = "atmel,24c64"; reg = <0x50>; }; + + pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "nvme1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "nvme2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "nvme3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "nvme4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "nvme5"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "nvme6"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@7 { + label = "nvme7"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; }; &i2c14 { @@ -1691,6 +2157,80 @@ compatible = "atmel,24c64"; reg = <0x50>; }; + + pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme8"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "nvme9"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "nvme10"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "nvme11"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "nvme12"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "nvme13"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "nvme14"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@7 { + label = "nvme15"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; }; &i2c15 { @@ -1700,6 +2240,80 @@ compatible = "atmel,24c64"; reg = <0x50>; }; + + pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme16"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "nvme17"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "nvme18"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "nvme19"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "nvme20"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "nvme21"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "nvme22"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@7 { + label = "nvme23"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; }; &vuart1 { @@ -1777,3 +2391,14 @@ status = "okay"; memory-region = <&vga_memory>; }; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts index 1752f32..60a39ea 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -3,6 +3,7 @@ #include "aspeed-g5.dtsi" #include #include +#include / { model = "FP5280G2 BMC"; @@ -245,7 +246,7 @@ label = "bmc"; m25p,fast-read; spi-max-frequency = <50000000>; -#include "openbmc-flash-layout.dtsi" +#include "openbmc-flash-layout-64.dtsi" }; }; @@ -902,4 +903,10 @@ }; +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; + #include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts new file mode 100644 index 0000000..caf6665 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2021 Inventec Corp. + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include "aspeed-g6-pinctrl.dtsi" +#include +#include + +/ { + model = "TRANSFORMERS BMC"; + compatible = "inventec,transformer-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + + // UID led + uid { + label = "UID_LED"; + gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; + }; + + // Heart beat led + heartbeat { + label = "HB_LED"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mac3 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii4_default>; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <33000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; +#include "openbmc-flash-layout.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "bmc2"; + spi-max-frequency = <33000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bios"; + spi-max-frequency = <33000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + +&wdt1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + //Set bmc' slave address; + bmc_slave@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + // FRU AT24C512C-SSHM-T + status = "okay"; + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + pagesize = <128>; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + tmp75@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + tmp75@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + + tmp468@48 { + compatible = "ti,tmp468"; + reg = <0x48>; + }; +}; + +&i2c7 { + status = "okay"; + adm1278@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + + +&i2c8 { + // FRU AT24C512C-SSHM-T + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c512"; + reg = <0x51>; + pagesize = <128>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + pagesize = <128>; + }; +}; + +&i2c9 { + // M.2 + status = "okay"; +}; + +&i2c10 { + // I2C EXPANDER + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + }; +}; + +&i2c11 { + // I2C EXPANDER + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + pcie_eeprom_riser1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@55 { + compatible = "atmel,24c512"; + reg = <0x55>; + pagesize = <128>; + }; + }; + + pcie_eeprom_riser2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@55 { + compatible = "atmel,24c512"; + reg = <0x55>; + pagesize = <128>; + }; + }; + + pcie_eeprom_riser3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@55 { + compatible = "atmel,24c512"; + reg = <0x55>; + pagesize = <128>; + }; + }; + }; +}; + +&i2c12 { + status = "okay"; + + psu0:psu0@58 { + compatible = "pmbus"; + reg = <0x58>; + }; +}; + +&gpio0 { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "presence-ps0","power-chassis-good","","","","","presence-ps1","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","power-chassis-control","","","", + /*G0-G7*/ "","","jtag-mux","","","","","", + /*H0-H7*/ "","","","","reset-button","power-button","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","tck-mux","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","nmi-button","","","","","","", + /*V0-V7*/ "","","","","power-config-full-load","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; + non-removable; + max-frequency = <52000000>; + bus-width = <8>; +}; + +&vhub { + status = "okay"; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; +}; + +&rtc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts new file mode 100644 index 0000000..68f332e --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts @@ -0,0 +1,488 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include + +/ { + model = "Tyan S7106 BMC"; + compatible = "tyan,s7106-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlycon"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + p2a_memory: region@987f0000 { + no-map; + reg = <0x987f0000 0x00010000>; /* 64KB */ + }; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; /* 16M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + identify { + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; + }; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + label = "bmc"; + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + /* RS-232 connector on header */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart3 { + /* Alternative to vuart to internally connect (route) to uart1 + * when vuart cannot be used due to BIOS limitations. + */ + status = "okay"; +}; + +&uart4 { + /* Alternative to vuart to internally connect (route) to the + * external port usually used by uart1 when vuart cannot be + * used due to BIOS limitations. + */ + status = "okay"; +}; + +&uart5 { + /* BMC "debug" (console) UART; connected to RS-232 connector + * on header; selectable via jumpers as alternative to uart2 + */ + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&p2a { + status = "okay"; + memory-region = <&p2a_memory>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&adc { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default>; + + /* CPU fan #0 */ + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + /* CPU fan #1 */ + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + /* PWM group for chassis fans #1, #2, #3 and #4 */ + fan@2 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + /* PWM group for chassis fans #5 and #6 */ + fan@6 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; +}; + +&i2c0 { + status = "okay"; + + /* Hardware monitor with temperature sensors */ + nct7802@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + }; + + /* Also connected to: + * - IPMB pin header + * - CPU #0 memory error LED @ 0x3A + * - CPU #1 memory error LED @ 0x3C + */ +}; + +&i2c1 { + /* Directly connected to PCH SMBUS #0 */ + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + /* BMC EEPROM, incl. mainboard FRU */ + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + /* Also connected to: + * - fan header + * - mini-SAS HD connector + * - SSATA SGPIO + * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low) + * to PCH SMBUS #3 + */ +}; + +&i2c3 { + status = "okay"; + + /* PSU1 FRU @ 0xA0 */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + /* PSU2 FRU @ 0xA2 */ + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + /* PSU1 @ 0xB0 */ + power-supply@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + /* PSU2 @ 0xB2 */ + power-supply@59 { + compatible = "pmbus"; + reg = <0x59>; + }; + + /* Also connected to: + * - PCH SMBUS #1 + */ +}; + +&i2c4 { + status = "okay"; + + /* Connected to: + * - PCH SMBUS #2 + */ + + /* Connected via switch to: + * - CPU #0 channels ABC VDDQ @ 0x80 + * - CPU #0 channels DEF VDDQ @ 0x81 + * - CPU #1 channels ABC VDDQ @ 0x82 + * - CPU #1 channels DEF VDDQ @ 0x83 + * - CPU #0 VCCIO & VMCP @ 0x52 + * - CPU #1 VCCIO & VMCP @ 0x53 + * - CPU #0 VCCIN @ 0xC0 + * - CPU #0 VSA @ 0xC2 + * - CPU #1 VCCIN @ 0xC4 + * - CPU #1 VSA @ 0xC6 + * - J110 + */ +}; + +&i2c5 { + status = "okay"; + + /* Connected via switch (PCH_BMC_SMB_SW_P) to: + * - mainboard FRU @ 0xAE + * - XDP connector + * - ME debug header + * - clock buffer @ 0xD8 + * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH) + * - PCH SMBUS + */ +}; + +&i2c6 { + status = "okay"; + + /* Connected via switch (BMC_PE_SMB_EN_1_N) to + * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to: + * - 0,0: PCIE slot 1, SMB #1 + * - 0,1: PCIE slot 1, SMB #2 + * - 1,0: PCIE slot 2, SMB #1 + * - 1,1: PCIE slot 2, SMB #2 + */ + + /* Connected via switch (BMC_PE_SMB_EN_2_N) to + * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to: + * - 0,0: OCP0 (A) SMB + * - 0,1: OCP0 (C) SMB + * - 1,0: OCP1 (A) SMB + * - 1,1: NC + */ +}; + +&i2c7 { + status = "okay"; + + /* Connected to: + * - PCH SMBUS #4 + */ +}; + +&i2c8 { + status = "okay"; + + /* Not connected */ +}; + +&mac0 { + status = "okay"; + use-ncsi; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&ibt { + status = "okay"; +}; + +&kcs1 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */ +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +/* We're following the GPIO naming as defined at + * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md. + * + * Notes on led-identify and id-button: + * - A physical button is connected to id-button which + * triggers the clock on a D flip-flop. The /Q output of the + * flip-flop drives its D input. + * - The flip-flop's Q output drives led-identify which is + * connected to LEDs. + * - With that, every button press toggles the LED between on and off. + * + * Notes on power-, reset- and nmi- button and control: + * - The -button signals can be used to monitor physical buttons. + * - The -control signals can be used to actuate the specific + * operation. + * - In hardware, the -button signals are connected to the -control + * signals through drivers with the -control signals being + * protected through diodes. + */ +&gpio { + status = "okay"; + gpio-line-names = + /*A0*/ "", + /*A1*/ "", + /*A2*/ "led-identify", /* in/out: BMC_IDLED_ON_N */ + /*A3*/ "", + /*A4*/ "", + /*A5*/ "", + /*A6*/ "", + /*A7*/ "", + /*B0-B7*/ "","","","","","","","", + /*C0*/ "", + /*C1*/ "", + /*C2*/ "", + /*C3*/ "", + /*C4*/ "id-button", /* in/out: BMC_IDBTN_IN_OUT_N */ + /*C5*/ "post-complete", /* in: FM_BIOS_POST_CMPLT_N */ + /*C6*/ "", + /*C7*/ "", + /*D0*/ "", + /*D1*/ "", + /*D2*/ "power-chassis-good", /* in: SYS_PWROK_BUF */ + /*D3*/ "platform-reset", /* in: SYS_PLTRST_N */ + /*D4*/ "", + /*D5*/ "", + /*D6*/ "", + /*D7*/ "", + /*E0*/ "power-button", /* in: BMC_PWBTN_IN_N */ + /*E1*/ "power-chassis-control", /* out: BMC_PWRBTN_OUT_N */ + /*E2*/ "reset-button", /* in: BMC_RSTBTN_IN_N */ + /*E3*/ "reset-control", /* out: BMC_RSTBTN_OUT_N */ + /*E4*/ "nmi-button", /* in: BMC_NMIBTN_IN_N */ + /*E5*/ "nmi-control", /* out: BMC_NMIBTN_OUT_N */ + /*E6*/ "", + /*E7*/ "led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */ + /*F0*/ "", + /*F1*/ "clear-cmos-control", /* out: BMC_CLR_CMOS_N */ + /*F2*/ "", + /*F3*/ "", + /*F4*/ "led-fault", /* out: AST_HW_FAULT_N */ + /*F5*/ "", + /*F6*/ "", + /*F7*/ "", + /*G0*/ "BMC_PE_SMB_EN_1_N", /* out */ + /*G1*/ "BMC_PE_SMB_EN_2_N", /* out */ + /*G2*/ "", + /*G3*/ "", + /*G4*/ "", + /*G5*/ "", + /*G6*/ "", + /*G7*/ "", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0*/ "", + /*Q1*/ "", + /*Q2*/ "", + /*Q3*/ "", + /*Q4*/ "BMC_PE_SMB_SW_BIT0", /* out */ + /*Q5*/ "BMC_PE_SMB_SW_BIT1", /* out */ + /*Q6*/ "", + /*Q7*/ "", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0*/ "", + /*AA1*/ "", + /*AA2*/ "", + /*AA3*/ "BMC_SMB3_PCH_IE_SML3_EN", /* out */ + /*AA4*/ "", + /*AA5*/ "", + /*AA6*/ "", + /*AA7*/ "", + /*AB0-AB7*/ "","","","","","","",""; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index c5aeb3c..b313a1c 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -383,6 +383,12 @@ interrupts = <8>; status = "disabled"; }; + + uart_routing: uart-routing@9c { + compatible = "aspeed,ast2400-uart-routing"; + reg = <0x9c 0x4>; + status = "disabled"; + }; }; uart2: serial@1e78d000 { diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 73ca1ec..c704945 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -491,6 +491,12 @@ #reset-cells = <1>; }; + uart_routing: uart-routing@9c { + compatible = "aspeed,ast2500-uart-routing"; + reg = <0x9c 0x4>; + status = "disabled"; + }; + lhc: lhc@a0 { compatible = "aspeed,ast2500-lhc"; reg = <0xa0 0x24 0xc8 0x8>; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 1b47be1..5106a42 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -364,6 +364,26 @@ status = "disabled"; }; + adc0: adc@1e6e9000 { + compatible = "aspeed,ast2600-adc0"; + reg = <0x1e6e9000 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + interrupts = ; + #io-channel-cells = <1>; + status = "disabled"; + }; + + adc1: adc@1e6e9100 { + compatible = "aspeed,ast2600-adc1"; + reg = <0x1e6e9100 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + interrupts = ; + #io-channel-cells = <1>; + status = "disabled"; + }; + gpio0: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; @@ -551,6 +571,12 @@ #reset-cells = <1>; }; + uart_routing: uart-routing@98 { + compatible = "aspeed,ast2600-uart-routing"; + reg = <0x98 0x8>; + status = "disabled"; + }; + ibt: ibt@140 { compatible = "aspeed,ast2600-ibt-bmc"; reg = <0x140 0x18>; diff --git a/arch/arm/boot/dts/at91-lmu5000.dts b/arch/arm/boot/dts/at91-lmu5000.dts new file mode 100644 index 0000000..f8863d7 --- /dev/null +++ b/arch/arm/boot/dts/at91-lmu5000.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree file for CalAmp LMU5000 board + * + * Copyright (C) 2013 Adam Porter + */ + +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "CalAmp LMU5000"; + compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; +}; + +&dbgu { + status = "okay"; +}; + +&ebi { + status = "okay"; + + nand_controller: nand-controller { + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + kernel@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + rootfs@400000 { + label = "rootfs"; + reg = <0x400000 0x3C00000>; + }; + + user1@4000000 { + label = "user1"; + reg = <0x4000000 0x2000000>; + }; + + user2@6000000 { + label = "user2"; + reg = <0x6000000 0x2000000>; + }; + }; + }; + }; +}; + +&macb0 { + phy-mode = "mii"; + status = "okay"; +}; + +&pinctrl { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = ; + }; + }; + + usb0 { + pinctrl_usb1_vbus_gpio: usb0_vbus_gpio { + atmel,pins = ; + }; + }; +}; + +&ssc0 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usart0 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usb0 { + num-ports = <2>; + status = "okay"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts new file mode 100644 index 0000000..5827383 --- /dev/null +++ b/arch/arm/boot/dts/at91-q5xr5.dts @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree file for Exegin Q5xR5 board + * + * Copyright (C) 2014 Owen Kirby + */ + +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "Exegin Q5x (rev5)"; + compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2"; + }; + + memory { + reg = <0x20000000 0x0>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; +}; + +&dbgu { + status = "okay"; +}; + +&ebi { + status = "okay"; + + flash: flash@0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x1000000 0x800000>; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + kernel@0 { + label = "kernel"; + reg = <0x0 0x200000>; + }; + + rootfs@200000 { + label = "rootfs"; + reg = <0x200000 0x600000>; + }; + }; + }; +}; + +&macb0 { + phy-mode = "mii"; + status = "okay"; +}; + +&pinctrl { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = ; + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + ; + }; + + pinctrl_spi0_npcs0: spi0_npcs0 { + atmel,pins = ; + }; + + pinctrl_spi0_npcs1: spi0_npcs1 { + atmel,pins = ; + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + ; + }; + + pinctrl_spi1_npcs0: spi1_npcs0 { + atmel,pins = ; + }; + + pinctrl_spi1_npcs1: spi1_npcs1 { + atmel,pins = ; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>; + cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>; + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + at91boot@0 { + label = "at91boot"; + reg = <0x0 0x4000>; + }; + + uenv@4000 { + label = "uboot-env"; + reg = <0x4000 0x4000>; + }; + + uboot@8000 { + label = "uboot"; + reg = <0x8000 0x3E000>; + }; + }; + + spidev@1 { + compatible = "spidev"; + spi-max-frequency = <2000000>; + reg = <1>; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>; + cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>; + status = "okay"; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <2000000>; + reg = <0>; + }; + + spidev@1 { + compatible = "spidev"; + spi-max-frequency = <2000000>; + reg = <1>; + }; +}; + +&usart0 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; +}; + +&usb0 { + num-ports = <2>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index b48ac3b..a4623cc 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -8,6 +8,7 @@ */ #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" +#include / { model = "Atmel SAMA5D27 SoM1"; @@ -95,8 +96,11 @@ i2c0: i2c@f8028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; at24@50 { @@ -113,6 +117,12 @@ bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = , + ; + bias-disable; + }; + pinctrl_qspi1_default: qspi1_default { sck_cs { pinmux = , diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index cd46725..08f0d4b 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -130,8 +130,11 @@ i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; }; @@ -215,8 +218,11 @@ i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; @@ -252,6 +258,13 @@ bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = , + ; + bias-disable; + }; + + pinctrl_isc_base: isc_base { pinmux = , , @@ -441,6 +454,12 @@ bias-disable; }; + pinctrl_i2c3_gpio: i2c3_gpio { + pinmux = , + ; + bias-disable; + }; + pinctrl_flx4_default: flx4_uart_default { pinmux = , , diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 025a783..21c8617 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -30,6 +30,14 @@ clock-frequency = <24000000>; }; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-wilc1000"; + reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_wilc_pwrseq>; + pinctrl-names = "default"; + }; }; &flx1 { @@ -310,5 +318,67 @@ ; bias-pull-up; }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd-data { + pinmux = , + , + , + , + ; + bias-disable; + }; + + conf-ck { + pinmux = ; + bias-disable; + }; + }; + + pinctrl_wilc_default: wilc_default { + conf-irq { + pinmux = ; + bias-disable; + }; + }; + + pinctrl_wilc_pwrseq: wilc_pwrseq { + conf-ce-nrst { + pinmux = , + ; + bias-disable; + }; + + conf-rtcclk { + pinmux = ; + bias-disable; + }; + }; +}; + +&sdmmc1 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + mmc-pwrseq = <&wifi_pwrseq>; + no-1-8-v; + non-removable; + bus-width = <4>; + status = "okay"; + + wilc: wifi@0 { + reg = <0>; + compatible = "microchip,wilc1000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wilc_default>; + clocks = <&pmc PMC_TYPE_SYSTEM 9>; + clock-names = "rtc"; + interrupts = ; + interrupt-parent = <&pioA>; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>; + assigned-clock-rates = <32768>; + }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index e06b587..806eb1d 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -307,8 +307,11 @@ }; &i2c0 { /* mikrobus i2c */ - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; status = "okay"; @@ -316,8 +319,11 @@ &i2c1 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; status = "okay"; @@ -402,6 +408,12 @@ bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = , + ; + bias-disable; + }; + pinctrl_key_gpio_default: key_gpio_default { pinmux = ; bias-pull-up; @@ -463,6 +475,12 @@ bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = , + ; + bias-disable; + }; + pinctrl_mikrobus1_an: mikrobus1_an { pinmux = ; bias-disable; diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index f3d6aaa..0e1975c 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -122,6 +122,14 @@ }; }; +&adc { + vddana-supply = <&vddout25>; + vref-supply = <&vddout25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>; + status = "okay"; +}; + &cpu0 { cpu-supply = <&vddcpu>; }; @@ -679,6 +687,18 @@ status = "okay"; }; +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + &trng { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index 3ca97b4..7e5c598 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -262,7 +262,7 @@ &macb1 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 019f1c3..7368347 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -166,7 +166,7 @@ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; - pinctrl@fffff400 { + pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 0d9ff12..ca240cd 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -53,7 +53,7 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp202-ac-power-supply"; status = "disabled"; }; @@ -69,7 +69,7 @@ #gpio-cells = <2>; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp209-battery-power-supply"; status = "disabled"; }; @@ -112,7 +112,7 @@ }; }; - usb_power_supply: usb-power-supply { + usb_power_supply: usb-power { compatible = "x-powers,axp202-usb-power-supply"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi index 65a07a6..a020c12 100644 --- a/arch/arm/boot/dts/axp22x.dtsi +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -52,7 +52,7 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp221-ac-power-supply"; status = "disabled"; }; @@ -62,7 +62,7 @@ #io-channel-cells = <1>; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp221-battery-power-supply"; status = "disabled"; }; @@ -163,7 +163,7 @@ }; }; - usb_power_supply: usb_power_supply { + usb_power_supply: usb-power { compatible = "x-powers,axp221-usb-power-supply"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi index 1dfeece..b93387b 100644 --- a/arch/arm/boot/dts/axp81x.dtsi +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -48,7 +48,7 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp813-ac-power-supply"; status = "disabled"; }; @@ -63,18 +63,18 @@ gpio-controller; #gpio-cells = <2>; - gpio0_ldo: gpio0-ldo { + gpio0_ldo: gpio0-ldo-pin { pins = "GPIO0"; function = "ldo"; }; - gpio1_ldo: gpio1-ldo { + gpio1_ldo: gpio1-ldo-pin { pins = "GPIO1"; function = "ldo"; }; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp813-battery-power-supply"; status = "disabled"; }; @@ -172,7 +172,7 @@ }; }; - usb_power_supply: usb-power-supply { + usb_power_supply: usb-power { compatible = "x-powers,axp813-usb-power-supply"; }; }; diff --git a/arch/arm/boot/dts/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/bcm-nsp-ax.dtsi new file mode 100644 index 0000000..f2e941d --- /dev/null +++ b/arch/arm/boot/dts/bcm-nsp-ax.dtsi @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom Northstar Plus Ax stepping-specific bindings. + * Notable differences from B0+ are the secondary-boot-reg and + * lack of DMA coherency. + */ + +&cpu1 { + secondary-boot-reg = <0xffff042c>; +}; + +&dma { + /delete-property/ dma-coherent; +}; + +&sdio { + /delete-property/ dma-coherent; +}; + +&amac0 { + /delete-property/ dma-coherent; +}; + +&amac1 { + /delete-property/ dma-coherent; +}; + +&amac2 { + /delete-property/ dma-coherent; +}; + +&ehci0 { + /delete-property/ dma-coherent; +}; + +&mailbox { + /delete-property/ dma-coherent; +}; + +&xhci { + /delete-property/ dma-coherent; +}; + +&ehci0 { + /delete-property/ dma-coherent; +}; + +&ohci0 { + /delete-property/ dma-coherent; +}; + +&i2c0 { + /delete-property/ dma-coherent; +}; + +&sata { + /delete-property/ dma-coherent; +}; + +&pcie0 { + /delete-property/ dma-coherent; +}; + +&pcie1 { + /delete-property/ dma-coherent; +}; + +&pcie2 { + /delete-property/ dma-coherent; +}; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 748df79..1c08daa 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -77,7 +77,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; - mpcore@19000000 { + mpcore-bus@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -166,7 +166,7 @@ }; }; - axi@18000000 { + axi: axi@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x0011c40c>; #address-cells = <1>; @@ -219,7 +219,7 @@ status = "disabled"; }; - sdio: sdhci@21000 { + sdio: mmc@21000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x21000 0x100>; interrupts = ; @@ -310,6 +310,7 @@ num-cs = <2>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; xhci: usb@29000 { @@ -362,6 +363,42 @@ status = "disabled"; }; + mdio: mdio@32000 { + compatible = "brcm,iproc-mdio"; + reg = <0x32000 0x8>; + #size-cells = <0>; + #address-cells = <1>; + }; + + mdio-mux@32000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + reg = <0x32000 0x4>; + mux-mask = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&mdio>; + + mdio_int: mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,ns-bx-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + mdio_ext: mdio@200 { + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + rng: rng@33000 { compatible = "brcm,bcm-nsp-rng"; reg = <0x33000 0x14>; @@ -520,13 +557,8 @@ }; }; - usb3_phy: usb3-phy@104000 { - compatible = "brcm,ns-bx-usb3-phy"; - reg = <0x104000 0x1000>, - <0x032000 0x1000>; - reg-names = "dmp", "ccb-mii"; - #phy-cells = <0>; - status = "disabled"; + usb3_dmp: syscon@104000 { + reg = <0x104000 0x1000>; }; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 72ce80f..631dd5b 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -3,6 +3,7 @@ #include "bcm2711.dtsi" #include "bcm2711-rpi.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; @@ -26,11 +27,6 @@ }; }; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; - sd_io_1v8_reg: sd_io_1v8_reg { compatible = "regulator-gpio"; regulator-name = "vdd-sd-io"; @@ -56,6 +52,10 @@ }; }; +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + &ddc0 { status = "okay"; }; @@ -178,23 +178,6 @@ status = "okay"; }; -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* EMMC2 is used to drive the SD card */ &emmc2 { vqmmc-supply = <&sd_io_1v8_reg>; @@ -237,13 +220,6 @@ pinctrl-names = "default"; pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; }; /* uart1 is mapped to the pin header */ @@ -260,3 +236,7 @@ &vec { status = "disabled"; }; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts new file mode 100644 index 0000000..19600b6 --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711-rpi-cm4.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + model = "Raspberry Pi Compute Module 4 IO Board"; + + leds { + led-act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + + led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; + }; +}; + +&ddc0 { + status = "okay"; +}; + +&ddc1 { + status = "okay"; +}; + +&gpio { + /* + * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "RGMII_MDIO", + "RGMIO_MDC", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + /* Shared with SPI flash */ + "PWM0_MISO", + "PWM1_MOSI", + "STATUS_LED_G_CLK", + "SPIFLASH_CE_N", + "SDA0", + "SCL0", + "RGMII_RXCLK", + "RGMII_RXCTL", + "RGMII_RXD0", + "RGMII_RXD1", + "RGMII_RXD2", + "RGMII_RXD3", + "RGMII_TXCLK", + "RGMII_TXCTL", + "RGMII_TXD0", + "RGMII_TXD1", + "RGMII_TXD2", + "RGMII_TXD3"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi1 { + status = "okay"; +}; + +&genet { + status = "okay"; +}; + +&pixelvalve0 { + status = "okay"; +}; + +&pixelvalve1 { + status = "okay"; +}; + +&pixelvalve2 { + status = "okay"; +}; + +&pixelvalve4 { + status = "okay"; +}; + +&vc4 { + status = "okay"; +}; + +&vec { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi new file mode 100644 index 0000000..a2954d4 --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711.dtsi" +#include "bcm2711-rpi.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,4-compute-module", "brcm,bcm2711"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + sd_io_1v8_reg: sd_io_1v8_reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1>, + <3300000 0x0>; + status = "okay"; + }; + + sd_vcc_reg: sd_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + +/* EMMC2 is used to drive the eMMC */ +&emmc2 { + bus-width = <8>; + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + broken-cd; + /* Even the IP block is limited to 100 MHz + * this provides a throughput gain + */ + mmc-hs200-1_8v; + status = "okay"; +}; + +&expgpio { + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "ANT1", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "SD_PWR_ON", + "ANT2"; + + ant1: ant1-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; + /* internal antenna enabled */ + output-high; + line-name = "ant1"; + }; + + ant2: ant2-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + /* external antenna disabled */ + output-low; + line-name = "ant2"; + }; +}; + +&genet { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&genet_mdio { + phy1: ethernet-phy@0 { + /* No PHY interrupt */ + reg = <0x0>; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; + uart-has-rtscts; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 33b2b77..243236b 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -7,6 +7,7 @@ #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-usb-otg.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; @@ -27,11 +28,10 @@ gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; +}; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; - }; +&bt { + shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; }; &gpio { @@ -110,19 +110,7 @@ }; &sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; - bus-width = <4>; - mmc-pwrseq = <&wifi_pwrseq>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; }; &sdhost { @@ -135,13 +123,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; - }; }; &uart1 { @@ -149,3 +130,7 @@ pinctrl-0 = <&uart1_gpio14>; status = "okay"; }; + +&wifi_pwrseq { + reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index 77099a7..d73daf5 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -3,6 +3,7 @@ #include "bcm2837.dtsi" #include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837"; @@ -130,28 +131,6 @@ status = "okay"; }; -/* - * SDHCI is used to control the SDIO for wireless - * - * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven - * by a single GPIO. We can't give GPIO control to one of the drivers, - * otherwise the other part would get unexpectedly disturbed. - */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - status = "okay"; - bus-width = <4>; - non-removable; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* SDHOST is used to drive the SD card */ &sdhost { pinctrl-names = "default"; @@ -160,16 +139,15 @@ bus-width = <4>; }; -/* uart0 communicates with the BT module */ +/* uart0 communicates with the BT module + * + * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven + * by a single GPIO. We can't give GPIO control to one of the drivers, + * otherwise the other part would get unexpectedly disturbed. + */ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - }; }; /* uart1 is mapped to the pin header */ diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 6101026..e12938b 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -4,6 +4,7 @@ #include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-lan7515.dtsi" #include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; @@ -31,11 +32,10 @@ linux,default-trigger = "default-on"; }; }; +}; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; }; &firmware { @@ -137,23 +137,6 @@ status = "okay"; }; -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - status = "okay"; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* SDHOST is used to drive the SD card */ &sdhost { pinctrl-names = "default"; @@ -166,13 +149,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; }; /* uart1 is mapped to the pin header */ @@ -181,3 +157,7 @@ pinctrl-0 = <&uart1_gpio14>; status = "okay"; }; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index dd4a486..42b5383 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -4,6 +4,7 @@ #include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; @@ -24,11 +25,10 @@ gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>; }; }; +}; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; }; &firmware { @@ -134,13 +134,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; }; /* uart1 is mapped to the pin header */ @@ -150,23 +143,6 @@ status = "okay"; }; -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - status = "okay"; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* SDHOST is used to drive the SD card */ &sdhost { pinctrl-names = "default"; @@ -174,3 +150,7 @@ status = "okay"; bus-width = <4>; }; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi new file mode 100644 index 0000000..0b64cc1 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + }; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + status = "okay"; + + bt: bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 61c7b13..43a5d67 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -20,7 +20,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; @@ -94,3 +94,40 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index d857751..d00495a 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -117,3 +117,40 @@ }; }; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 6c6bb7b..7546c8d 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index d29e7f8..beae9ea 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x18000000>; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index 9b6887d..7879f7d 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 7989a53..56d309d 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 87b655b..89f992a 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -30,7 +30,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; @@ -187,3 +187,45 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index f806be5..c2a266a 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts new file mode 100644 index 0000000..4480605 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2021 Arınç ÃœNAL + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708"; + model = "Asus RT-AC88U"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x00180000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "white:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan-red { + label = "red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + lan { + label = "white:lan"; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "white:usb2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3 { + label = "white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port1>, <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + wps { + label = "white:wps"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "Wi-Fi"; + linux,code = ; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + + led { + label = "Backlight"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + sw0_p5: port@5 { + reg = <5>; + label = "extsw"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + reg = <8>; + ethernet = <&gmac2>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x00080000 0x00180000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x00200000 0x07e00000>; + compatible = "brcm,trx"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index a6e2aeb..60bfd52 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -118,3 +118,45 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 05d4f29..9bef6b9 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -129,7 +129,7 @@ }; }; - mdio-bus-mux@18003000 { + mdio-mux@18003000 { /* BIT(9) = 1 => external mdio */ mdio@200 { diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index 4b8117f..b51a0ee 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -68,3 +68,40 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index 5fecce0..b959a95 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -68,3 +68,40 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 452b8d0..b0d8a68 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x18000000>; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 049cdfd..07eb3a8 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -105,3 +105,40 @@ }; }; }; + +&switch { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index 3b978dc..64f973e 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -20,7 +20,7 @@ bootargs = " console=ttyS0,115200n8 earlycon"; }; - memory { + memory@0 { reg = <0x00000000 0x08000000>; device_type = "memory"; }; @@ -110,6 +110,12 @@ reg = <0x50>; pagesize = <32>; read-only; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@66 { + reg = <0x66 0x6>; + }; }; }; }; @@ -133,6 +139,11 @@ */ }; +&gmac0 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <&mac_address>; +}; + &gmac1 { status = "disabled"; }; @@ -195,3 +206,25 @@ }; }; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "poe"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + + fixed-link { + speed = <1000>; + duplex-full; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index f920892..d4f3550 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -19,7 +19,7 @@ #size-cells = <1>; interrupt-parent = <&gic>; - chipcommonA@18000000 { + chipcommon-a-bus@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; #address-cells = <1>; @@ -44,7 +44,7 @@ }; }; - mpcore@19000000 { + mpcore-bus@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -369,8 +369,8 @@ #address-cells = <1>; }; - mdio-bus-mux@18003000 { - compatible = "mdio-mux-mmioreg"; + mdio-mux@18003000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&mdio>; #address-cells = <1>; #size-cells = <0>; @@ -415,7 +415,7 @@ status = "disabled"; }; - dmu@1800c000 { + dmu-bus@1800c000 { compatible = "simple-bus"; ranges = <0 0x1800c000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 51546fc..3f03a38 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -180,6 +180,24 @@ gmac0: ethernet@5000 { reg = <0x5000 0x1000>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch: switch@1e { + compatible = "brcm,bcm53125"; + reg = <0x1e>; + + status = "disabled"; + + /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; gmac1: ethernet@b000 { diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 3d13e46..d9eb204 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -38,7 +38,7 @@ model = "NorthStar SVK (BCM94708)"; compatible = "brcm,bcm94708", "brcm,bcm4708"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index 5017b7b..618c812 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -38,7 +38,7 @@ model = "NorthStar SVK (BCM94709)"; compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 1f73885..60376b6 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958522ER)"; - compatible = "brcm,bcm58522", "brcm,nsp"; + compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -134,6 +134,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index b6b9ca8..8eeb319 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958525ER)"; - compatible = "brcm,bcm58525", "brcm,nsp"; + compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -134,6 +134,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index ecf426f..dc86d5a 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus XMC (BCM958525xmc)"; - compatible = "brcm,bcm58525", "brcm,nsp"; + compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -150,6 +150,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index 8ca18da..c457e53 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958622HR)"; - compatible = "brcm,bcm58622", "brcm,nsp"; + compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -138,6 +138,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 9747378..c068719 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958623HR)"; - compatible = "brcm,bcm58623", "brcm,nsp"; + compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -142,6 +142,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi new file mode 100644 index 0000000..102acd8 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65 series (Alamo). + * + * Copyright (C) 2020-2021 Matthew Hagan + */ + +#include "bcm958625-meraki-mx6x-common.dtsi" + +/ { + keys { + compatible = "gpio-keys-polled"; + autorepeat; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpioa 8 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + /* green:wan1-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <0>; + color = ; + gpios = <&gpioa 25 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* green:wan1-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <1>; + color = ; + gpios = <&gpioa 24 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* green:wan2-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <2>; + color = ; + gpios = <&gpioa 27 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* green:wan2-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <3>; + color = ; + gpios = <&gpioa 26 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* amber:power */ + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led-5 { + /* white:status */ + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&axi { + mdio-mux@3f1c0 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + reg = <0x3f1c0 0x4>; + mux-mask = <0x2000>; + mdio-parent-bus = <&mdio_ext>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + phy_port6: phy@0 { + reg = <0>; + }; + + phy_port7: phy@1 { + reg = <1>; + }; + + phy_port8: phy@2 { + reg = <2>; + }; + + phy_port9: phy@3 { + reg = <3>; + }; + + phy_port10: phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + ethernet = <&sgmii1>; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan8"; + phy-handle = <&phy_port6>; + }; + + port@2 { + reg = <2>; + label = "lan9"; + phy-handle = <&phy_port7>; + }; + + port@3 { + reg = <3>; + label = "lan10"; + phy-handle = <&phy_port8>; + }; + + port@4 { + reg = <4>; + label = "lan11"; + phy-handle = <&phy_port9>; + }; + + port@5 { + reg = <5>; + label = "lan12"; + phy-handle = <&phy_port10>; + }; + }; + }; + }; + + mdio-mii@2000 { + reg = <0x2000>; + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; + dsa,member = <2 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + ethernet = <&sgmii0>; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan3"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan4"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan5"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan6"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "lan7"; + phy-handle = <&phy_port5>; + }; + }; + }; + }; + }; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + port@0 { + label = "wan1"; + reg = <0>; + }; + + port@1 { + label = "wan2"; + reg = <1>; + }; + + sgmii0: port@4 { + label = "sw0"; + reg = <4>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + sgmii1: port@5 { + label = "sw1"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + ethernet = <&amac2>; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi new file mode 100644 index 0000000..7c487c7 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin). + * + * Copyright (C) 2020-2021 Matthew Hagan + */ + +#include "bcm958625-meraki-mx6x-common.dtsi" + +/ { + + keys { + compatible = "gpio-keys-polled"; + autorepeat; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpioa 6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + /* green:lan1-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <0>; + color = ; + gpios = <&gpioa 19 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* green:lan1-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <1>; + color = ; + gpios = <&gpioa 18 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* green:lan2-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <2>; + color = ; + gpios = <&gpioa 24 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* green:lan2-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <3>; + color = ; + gpios = <&gpioa 20 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* green:lan3-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <4>; + color = ; + gpios = <&gpioa 26 GPIO_ACTIVE_LOW>; + }; + + led-5 { + /* green:lan3-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <5>; + color = ; + gpios = <&gpioa 25 GPIO_ACTIVE_LOW>; + }; + + led-6 { + /* green:lan4-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <6>; + color = ; + gpios = <&gpioa 28 GPIO_ACTIVE_LOW>; + }; + + led-7 { + /* green:lan4-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <7>; + color = ; + gpios = <&gpioa 27 GPIO_ACTIVE_LOW>; + }; + + led-8 { + /* green:wan-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <8>; + color = ; + gpios = <&gpioa 30 GPIO_ACTIVE_LOW>; + }; + + led-9 { + /* green:wan-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <9>; + color = ; + gpios = <&gpioa 29 GPIO_ACTIVE_LOW>; + }; + + led-a { + /* amber:power */ + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpioa 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-b { + /* white:status */ + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + port@0 { + label = "lan1"; + reg = <0>; + }; + + port@1 { + label = "lan2"; + reg = <1>; + }; + + port@2 { + label = "lan3"; + reg = <2>; + }; + + port@3 { + label = "lan4"; + reg = <3>; + }; + + port@4 { + label = "wan"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts new file mode 100644 index 0000000..9944566 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" +#include "bcm-nsp-ax.dtsi" + +/ { + model = "Cisco Meraki MX64(A0)"; + compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts new file mode 100644 index 0000000..0693943 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" + +/ { + model = "Cisco Meraki MX64"; + compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts new file mode 100644 index 0000000..112fddb --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" +#include "bcm-nsp-ax.dtsi" + +/ { + model = "Cisco Meraki MX64W(A0)"; + compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts new file mode 100644 index 0000000..de2e367 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" + +/ { + model = "Cisco Meraki MX64W"; + compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts new file mode 100644 index 0000000..d1b684d --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65. + * + * Copyright (C) 2020-2021 Matthew Hagan + */ + +/dts-v1/; + +#include "bcm958625-meraki-alamo.dtsi" + +/ { + model = "Cisco Meraki MX65"; + compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts new file mode 100644 index 0000000..a2165ab --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65W. + * + * Copyright (C) 2020-2021 Matthew Hagan + */ + +/dts-v1/; + +#include "bcm958625-meraki-alamo.dtsi" + +/ { + model = "Cisco Meraki MX65W"; + compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi new file mode 100644 index 0000000..6519b7c --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices. + * + * Copyright (C) 2020-2021 Matthew Hagan + */ + +#include "bcm-nsp.dtsi" +#include +#include +#include + +/ { + pwm-leds { + compatible = "pwm-leds"; + + led-1 { + function = LED_FUNCTION_INDICATOR; + color = ; + pwms = <&pwm 1 50000>; + max-brightness = <255>; + }; + + led-2 { + function = LED_FUNCTION_INDICATOR; + color = ; + pwms = <&pwm 2 50000>; + max-brightness = <255>; + }; + + led-3 { + function = LED_FUNCTION_INDICATOR; + color = ; + pwms = <&pwm 3 50000>; + max-brightness = <255>; + }; + }; +}; + +&amac2 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; + }; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "shmoo"; + reg = <0x80000 0x80000>; + read-only; + }; + + partition@100000 { + label = "bootkernel1"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "nvram"; + reg = <0x400000 0x100000>; + }; + + partition@500000 { + label = "bootkernel2"; + reg = <0x500000 0x300000>; + }; + + partition@800000 { + label = "ubi"; + reg = <0x800000 0x3f700000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_leds>; + + pwm_leds: pwm_leds { + function = "pwm"; + groups = "pwm1_grp", "pwm2_grp", "pwm3_grp"; + }; +}; + +&pwm { + status = "okay"; + #pwm-cells = <2>; +}; + +&uart0 { + clock-frequency = <62500000>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index 0f92b77..b22fc66 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958625HR)"; - compatible = "brcm,bcm58625", "brcm,nsp"; + compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -149,6 +149,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 9e984ca..0183f89 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -36,7 +36,7 @@ / { model = "NorthStar Plus SVK (BCM958625K)"; - compatible = "brcm,bcm58625", "brcm,nsp"; + compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -153,6 +153,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 5475dab..007e347 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM988312HR)"; - compatible = "brcm,bcm88312", "brcm,nsp"; + compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -58,6 +58,10 @@ /* USB 3 support needed to be complete */ +&dma { + status = "okay"; +}; + &amac0 { status = "okay"; }; @@ -134,6 +138,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index dfc1ef8..6b485cb 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -965,6 +965,25 @@ }; }; + target-module@59000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x59000020 0x4>; + reg-names = "rev"; + clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000000 0x1000>; + + bb2d: gpu@0 { + compatible = "vivante,gc"; + reg = <0x0 0x700>; + interrupts = ; + clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>; + clock-names = "core"; + }; + }; + aes1_target: target-module@4b500000 { compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x4b500080 0x4>, diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index cfb239d..1a49f15 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -41,7 +41,7 @@ leds: leds { compatible = "gpio-leds"; - on { + led { label = "e60k02:white:on"; gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi new file mode 100644 index 0000000..156de65 --- /dev/null +++ b/arch/arm/boot/dts/e70k02.dtsi @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + * and + * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd + * + * Netronix E70K02 board common. + * This board is equipped with different SoCs and + * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and + * the Tolino Shine 3 (with i.MX6SL) + */ +#include + +/ { + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc3; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + + cover { + label = "Cover"; + gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + wakeup-source; + }; + + pageup { + label = "PageUp"; + gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + pagedown { + label = "PageDown"; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + led { + label = "e70k02:white:on"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + status = "okay"; + + lm3630a: backlight@36 { + reg = <0x36>; + compatible = "ti,lm3630a"; + enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0>; + label = "backlight_warm"; + default-brightness = <0>; + max-brightness = <255>; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + label = "backlight_cold"; + default-brightness = <0>; + max-brightness = <255>; + }; + }; + + /* TODO: KX122 acceleration sensor a 0x1e */ + +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + /* TODO: CYTTSP5 touch controller at 0x24 */ + + /* TODO: SY7636 PMIC for E Ink at 0x62 */ + +}; + +&i2c3 { + clock-frequency = <100000>; + status = "okay"; + + ricoh619: pmic@32 { + compatible = "ricoh,rc5t619"; + reg = <0x32>; + interrupt-parent = <&gpio4>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + + regulators { + dcdc1_reg: DCDC1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <900000>; + regulator-suspend-min-microvolt = <900000>; + }; + }; + + /* Core3_3V3 */ + dcdc2_reg: DCDC2 { + regulator-name = "DCDC2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3300000>; + regulator-suspend-min-microvolt = <3300000>; + }; + }; + + dcdc3_reg: DCDC3 { + regulator-name = "DCDC3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V2 */ + dcdc4_reg: DCDC4 { + regulator-name = "DCDC4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V8 */ + dcdc5_reg: DCDC5 { + regulator-name = "DCDC5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1700000>; + regulator-suspend-min-microvolt = <1700000>; + }; + }; + + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-boot-on; + }; + + /* Core1_3V3 */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3000000>; + regulator-suspend-min-microvolt = <3000000>; + }; + }; + + /* Core5_1V2 */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-boot-on; + }; + + /* SPD_3V3 */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-always-on; + regulator-boot-on; + }; + + /* DDR_0V6 */ + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-always-on; + regulator-boot-on; + }; + + /* VDD_PWM */ + ldo7_reg: LDO7 { + regulator-name = "LDO7"; + regulator-boot-on; + }; + + /* ldo_1v8 */ + ldo8_reg: LDO8 { + regulator-name = "LDO8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "LDO9"; + regulator-boot-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "LDO10"; + regulator-boot-on; + }; + + ldortc1_reg: LDORTC1 { + regulator-name = "LDORTC1"; + regulator-boot-on; + }; + }; + }; +}; + +&snvs_rtc { + /* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */ + status = "disabled"; +}; + +&uart1 { + status = "okay"; +}; + +&usdhc1 { + non-removable; + no-1-8-v; + status = "okay"; +}; + +&usdhc3 { + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 0a27f03..89495dd 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -80,7 +80,7 @@ }; ethernet@20000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; + compatible = "smsc,lan9221", "smsc,lan9115"; reg = <0x20000000 0x10000>; phy-mode = "mii"; interrupt-parent = <&gpio0>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index f6ba5e4..5f7f8fe 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -19,6 +19,7 @@ / { model = "Samsung Rinato board"; compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3"; + chassis-type = "watch"; aliases { i2c7 = &i2c_max77836; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 5592217..19bb7dc 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -18,6 +18,7 @@ / { model = "Samsung Galaxy S2 (GT-I9100)"; compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4"; + chassis-type = "handset"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 1c53941..435fda6 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -206,74 +206,74 @@ ldo4_reg: LDO4 { regulator-name = "VDD_RTC_1.8V"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo6_reg: LDO6 { regulator-name = "VMIPI_1.8V"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo7_reg: LDO7 { regulator-name = "VDD_AUD_1.8V"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; ldo8_reg: LDO8 { regulator-name = "VADC_3.3V"; regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; ldo9_reg: LDO9 { regulator-name = "DVDD_SWB_2.8V"; regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; regulator-always-on; }; ldo10_reg: LDO10 { regulator-name = "VDD_PLL_1.1V"; regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; }; ldo11_reg: LDO11 { regulator-name = "VDD_AUD_3V"; regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; }; ldo14_reg: LDO14 { regulator-name = "AVDD18_SWB_1.8V"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo17_reg: LDO17 { regulator-name = "VDD_SWB_3.3V"; regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; ldo21_reg: LDO21 { regulator-name = "VDD_MIF_1.2V"; regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; }; buck1_reg: BUCK1 { regulator-name = "VDD_ARM_1.2V"; regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; @@ -281,7 +281,7 @@ buck2_reg: BUCK2 { regulator-name = "VDD_INT_1.1V"; regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 3eb8df3..9c4ff75 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -16,6 +16,7 @@ / { model = "Samsung Trats based on Exynos4210"; compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4"; + chassis-type = "handset"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index f052853..9f93e74 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -16,6 +16,7 @@ / { model = "Samsung Universal C210 based on Exynos4210 rev0"; compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4"; + chassis-type = "handset"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts index 07fbcf8..61aca57 100644 --- a/arch/arm/boot/dts/exynos4412-i9300.dts +++ b/arch/arm/boot/dts/exynos4412-i9300.dts @@ -12,6 +12,7 @@ / { model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412"; compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + chassis-type = "handset"; /* bootargs are passed in by bootloader */ diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts index 6bc3d89..77083f1 100644 --- a/arch/arm/boot/dts/exynos4412-i9305.dts +++ b/arch/arm/boot/dts/exynos4412-i9305.dts @@ -5,6 +5,7 @@ / { model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412"; compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + chassis-type = "handset"; /* bootargs are passed in by bootloader */ diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index 2c79214..9ae05b0 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -5,6 +5,7 @@ / { compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412"; + chassis-type = "handset"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 5479ef0..e6aec5f 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -382,7 +382,7 @@ buck1_reg: BUCK1 { regulator-name = "VDD_MIF"; regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -391,7 +391,7 @@ buck2_reg: BUCK2 { regulator-name = "VDD_ARM"; regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -400,7 +400,7 @@ buck3_reg: BUCK3 { regulator-name = "VDD_INT"; regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -409,7 +409,7 @@ buck4_reg: BUCK4 { regulator-name = "VDD_G3D"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -418,7 +418,7 @@ buck5_reg: BUCK5 { regulator-name = "VDD_M12"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -427,7 +427,7 @@ buck6_reg: BUCK6 { regulator-name = "VDD12_5M"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -436,7 +436,7 @@ buck9_reg: BUCK9 { regulator-name = "VDDF28_EMMC"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ diff --git a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts index 9f55942..0932ec5 100644 --- a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts +++ b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts @@ -12,6 +12,7 @@ / { model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412"; compatible = "samsung,n8010", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4"; + chassis-type = "tablet"; /* this is the base variant without any kind of modem */ }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 7b447b6..3c2d2a7 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -15,6 +15,7 @@ / { model = "Samsung Trats 2 based on Exynos4412"; compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + chassis-type = "handset"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index a771542..3583095 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -240,9 +240,6 @@ vinl8-supply = <&buck8_reg>; vinl9-supply = <&buck8_reg>; - s5m8767,pmic-buck2-dvs-voltage = <1300000>; - s5m8767,pmic-buck3-dvs-voltage = <1100000>; - s5m8767,pmic-buck4-dvs-voltage = <1200000>; s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, <&gpd1 1 GPIO_ACTIVE_HIGH>, <&gpd1 2 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts index 0822b77..f8ca61d 100644 --- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts +++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts @@ -14,6 +14,7 @@ model = "Google Snow Rev 5+"; compatible = "google,snow-rev5", "samsung,exynos5250", "samsung,exynos5"; + chassis-type = "laptop"; sound { compatible = "google,snow-audio-max98090"; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 9946dce..a630bc6 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -12,6 +12,7 @@ model = "Google Snow"; compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250", "samsung,exynos5"; + chassis-type = "laptop"; sound { compatible = "google,snow-audio-max98095"; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index fba1462..e0feedc 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -16,6 +16,7 @@ / { model = "Google Spring"; compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5"; + chassis-type = "laptop"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 4ffa925..1397789 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -386,7 +386,6 @@ sata: sata@122f0000 { compatible = "snps,dwc-ahci"; - samsung,sata-freq = <66>; reg = <0x122F0000 0x1ff>; interrupts = ; clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 315b3dc..e76fb10 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -26,6 +26,7 @@ "google,pit-rev7", "google,pit-rev6", "google,pit", "google,peach","samsung,exynos5420", "samsung,exynos5"; + chassis-type = "laptop"; aliases { /* Assign 20 so we don't get confused w/ builtin ones */ diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 0ce3443..77013ee 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -24,6 +24,7 @@ "google,pi-rev11", "google,pi-rev10", "google,pi", "google,peach", "samsung,exynos5800", "samsung,exynos5"; + chassis-type = "laptop"; aliases { /* Assign 20 so we don't get confused w/ builtin ones */ diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index c79a2a0..3961496 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -439,24 +439,6 @@ pci@50000000 { status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; }; ethernet@60000000 { diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts new file mode 100644 index 0000000..704abd2 --- /dev/null +++ b/arch/arm/boot/dts/gemini-ns2502.dts @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Corentin Labbe + * Device Tree file for Edimax NS 2502 + */ + +/dts-v1/; + +#include "gemini.dtsi" + +/ { + model = "Edimax NS-2502"; + compatible = "edimax,ns-2502", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + chosen { + bootargs = "console=ttyS0,19200n8"; + stdout-path = &uart0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + /* We lack the knowledge of necessary GPIO to achieve + * Gigabit + */ + max-speed = <100>; + }; + }; +}; + +ðernet { + status = "okay"; + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; +}; + +&flash { + status = "okay"; + /* 8MB of flash */ + reg = <0x30000000 0x00800000>; + + pinctrl-names = "enabled", "disabled"; + pinctrl-0 = <&pflash_default_pins>; + pinctrl-1 = <&pflash_disabled_pins>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + }; + partition@20000 { + label = "kernel"; + reg = <0x00020000 0x00700000>; + }; + partition@720000 { + label = "VCTL"; + reg = <0x00720000 0x00020000>; + }; + partition@740000 { + label = "CurConf"; + reg = <0x00740000 0x000a0000>; + }; + partition@7e0000 { + label = "FIS"; + reg = <0x007e0000 0x00010000>; + }; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; +}; + +&ide0 { + status = "okay"; +}; + +&ide1 { + status = "okay"; +}; + +&sata { + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-sata-bridge; + status = "okay"; +}; + +&syscon { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp"; + }; + }; + pflash_disabled_pins: pinctrl-pflash-disabled { + mux { + function = "gpio0"; + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", + "gpio0kgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index c78e55f..91c19e8 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -256,24 +256,6 @@ pci@50000000 { status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; }; ethernet@60000000 { diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 1b64cc8..d0efd76 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -252,24 +252,6 @@ pci@50000000 { status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; }; ethernet@60000000 { diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts new file mode 100644 index 0000000..2b3e7db --- /dev/null +++ b/arch/arm/boot/dts/gemini-ssi1328.dts @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Corentin Labbe + * Device Tree file for SSI 1328 + */ + +/dts-v1/; + +#include "gemini.dtsi" + +/ { + model = "SSI 1328"; + compatible = "ssi,1328", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + chosen { + bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M"; + stdout-path = &uart0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* LAN Marvell 88E1118 */ + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + /* We lack the knowledge of necessary GPIO to achieve + * Gigabit + */ + max-speed = <100>; + }; + /* WAN ICPlus IP101A */ + phy1: ethernet-phy@2 { + reg = <2>; + device_type = "ethernet-phy"; + }; + }; +}; + +ðernet { + status = "okay"; + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; +}; + +&flash { + status = "okay"; + /* 32MB of flash */ + reg = <0x30000000 0x03200000>; + + pinctrl-names = "enabled", "disabled"; + pinctrl-0 = <&pflash_default_pins>; + pinctrl-1 = <&pflash_disabled_pins>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x7F>; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; +}; + +&ide0 { + status = "okay"; +}; + +&ide1 { + status = "okay"; +}; + +&sata { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; +}; + +&syscon { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", "gpio0bgrp"; + }; + }; + pflash_disabled_pins: pinctrl-pflash-disabled { + mux { + function = "gpio0"; + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", + "gpio0kgrp"; + }; + }; + pinctrl-gmii { + /* This platform use both the ethernet ports */ + mux { + function = "gmii"; + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts index 5602ba8..de3c441 100644 --- a/arch/arm/boot/dts/gemini-wbd111.dts +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -140,24 +140,6 @@ pci@50000000 { status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; }; ethernet@60000000 { diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts index a4a260c..e5ceaad 100644 --- a/arch/arm/boot/dts/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -151,24 +151,6 @@ pci@50000000 { status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; }; ethernet@60000000 { diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index cc053af..e836bd0 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -16,7 +16,7 @@ compatible = "simple-bus"; interrupt-parent = <&intcon>; - flash@30000000 { + flash: flash@30000000 { compatible = "cortina,gemini-flash", "cfi-flash"; syscon = <&syscon>; pinctrl-names = "default"; @@ -289,9 +289,28 @@ device_type = "pci"; #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; status = "disabled"; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + bus-range = <0x00 0xff>; /* PCI ranges mappings */ ranges = @@ -322,7 +341,7 @@ }; }; - ethernet@60000000 { + ethernet: ethernet@60000000 { compatible = "cortina,gemini-ethernet"; reg = <0x60000000 0x4000>, /* Global registers, queue */ <0x60004000 0x2000>, /* V-bit */ @@ -365,7 +384,7 @@ clocks = <&syscon GEMINI_CLK_GATE_SECURITY>; }; - ide@63000000 { + ide0: ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; @@ -378,7 +397,7 @@ #size-cells = <0>; }; - ide@63400000 { + ide1: ide@63400000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63400000 0x1000>; interrupts = <5 IRQ_TYPE_EDGE_RISING>; @@ -421,7 +440,7 @@ status = "disabled"; }; - usb@68000000 { + usb0: usb@68000000 { compatible = "cortina,gemini-usb", "faraday,fotg210"; reg = <0x68000000 0x1000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; @@ -442,7 +461,7 @@ status = "disabled"; }; - usb@69000000 { + usb1: usb@69000000 { compatible = "cortina,gemini-usb", "faraday,fotg210"; reg = <0x69000000 0x1000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts index 4329b37..e8325fd 100644 --- a/arch/arm/boot/dts/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -192,7 +192,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi index a326a33..f028b6a 100644 --- a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi +++ b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi @@ -47,7 +47,6 @@ mpl3115a2: pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; - vcc-supply = <®_3v3_acm>; /* * The MPL3115 interrupts are connected to pin 22 and 23 diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts index 5ac8444..56bb1ca 100644 --- a/arch/arm/boot/dts/imx6dl-prtrvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts @@ -67,11 +67,9 @@ ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, <&gpio5 11 GPIO_ACTIVE_LOW>; vin-supply = <®_3v3>; - vin-voltage-override = <3100000>; autosuspend-delay = <30000>; irq-status-read-quirk; en2-rf-quirk; - t5t-rmb-extra-byte-quirk; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts index 667b8fa..b12b5aa 100644 --- a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts +++ b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts @@ -6,6 +6,7 @@ #include "imx6dl.dtsi" #include "imx6qdl-skov-cpu.dtsi" #include "imx6qdl-skov-cpu-revc.dtsi" +#include "imx6qdl-skov-revc-lt2.dtsi" / { model = "SKOV IMX6 CPU SoloCore"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index e5c4dc6..674af39 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -296,14 +296,6 @@ reg = <2>; color = ; }; - - chan@3 { - chan-name = "W"; - led-cur = /bits/ 8 <0x0>; - max-cur = /bits/ 8 <0x0>; - reg = <3>; - color = ; - }; }; eeprom@57 { diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts index f00add7..ff97d22 100644 --- a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts +++ b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts @@ -6,6 +6,7 @@ #include "imx6q.dtsi" #include "imx6qdl-skov-cpu.dtsi" #include "imx6qdl-skov-cpu-revc.dtsi" +#include "imx6qdl-skov-revc-lt2.dtsi" / { model = "SKOV IMX6 CPU QuadCore"; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 30fa349..ed2739e 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -310,10 +310,10 @@ st,mod-12b = <1>; /* internal ADC reference */ st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ + /* ADC conversion time: 80 clocks */ st,sample-time = <4>; - stmpe_touchscreen { + stmpe_touchscreen: stmpe-touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -330,10 +330,11 @@ st,touch-det-delay = <5>; }; - stmpe_adc { + stmpe_adc: stmpe-adc { compatible = "st,stmpe-adc"; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; + #io-channel-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi index 0199385..120d6e9 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi @@ -145,8 +145,11 @@ }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <400000>; status = "disabled"; @@ -185,8 +188,11 @@ }; &i2c2 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <100000>; status = "disabled"; }; @@ -256,6 +262,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>; no-1-8-v; + disable-wp; status = "disabled"; }; @@ -299,6 +306,20 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 @@ -306,10 +327,10 @@ >; }; - pinctrl_i2c1: i2c1grp { + pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index a80aa08..94b254b 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -78,8 +78,11 @@ }; &i2c3 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <400000>; status = "okay"; @@ -259,6 +262,13 @@ >; }; + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 diff --git a/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi new file mode 100644 index 0000000..48c9ce0 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (C) 2021 Pengutronix, Oleksij Rempel + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; + pwms = <&pwm2 0 20000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <17>; + default-brightness-level = <8>; + power-supply = <®_24v0>; + }; + + display { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + + port@0 { + reg = <0>; + + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel { + compatible = "logictechno,lttd800480070-l2rt"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&display0_out>; + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x58 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi index b18b83a..51a3a53 100644 --- a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi @@ -20,7 +20,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; status = "okay"; m25p80: flash@0 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 89c342f..f5de5de 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -264,7 +264,7 @@ }; pcie: pcie@1ffc000 { - compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; + compatible = "fsl,imx6q-pcie"; reg = <0x01ffc000 0x04000>, <0x01f00000 0x80000>; reg-names = "dbi", "config"; @@ -272,10 +272,9 @@ #size-cells = <2>; device_type = "pci"; bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>, /* downstream I/O */ + <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; - num-viewport = <4>; interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts index b92e0f2..7648e8a 100644 --- a/arch/arm/boot/dts/imx6qp-prtwd3.dts +++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts @@ -123,7 +123,7 @@ }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; @@ -189,7 +189,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index b310f13..0503655 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -110,5 +110,5 @@ }; &pcie { - compatible = "fsl,imx6qp-pcie", "snps,dw-pcie"; + compatible = "fsl,imx6qp-pcie"; }; diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/imx6sl-tolino-vision5.dts new file mode 100644 index 0000000..ff6118d --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-tolino-vision5.dts @@ -0,0 +1,349 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Device tree for the Tolino Vision 5 ebook reader + * + * Name on mainboard is: 37NB-E70K0M+6A3 + * Serials start with: E70K02 (a number also seen in + * vendor kernel sources) + * + * This mainboard seems to be equipped with different SoCs. + * In the Tolino Vision 5 ebook reader it is a i.MX6SL + * + * Copyright 2021 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include +#include +#include "imx6sl.dtsi" +#include "e70k02.dtsi" + +/ { + model = "Tolino Vision 5"; + compatible = "kobo,tolino-vision5", "fsl,imx6sl"; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x17059 /* PWR_SW */ + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x17059 /* HALL_EN */ + MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x17059 /* PAGE_UP */ + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x17059 /* PAGE_DOWN */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79 + MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79 + MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79 + MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79 + MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79 + MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79 + MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79 + MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79 + MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79 + MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79 + MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79 + MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79 + MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79 + MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79 + MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79 + MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79 + MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79 + MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79 + MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79 + MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79 + MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79 + MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79 + MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79 + MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79 + MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79 + MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79 + MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x79 + MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x79 + MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79 + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79 + MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1grp-sleep { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2grp-sleep { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x10059 + >; + }; + + pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */ + >; + }; + + pinctrl_ricoh_gpio: ricoh-gpiogrp { + fsl,pins = < + MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x1b8b1 /* ricoh619 chg */ + MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b8b1 /* ricoh619 irq */ + MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x17059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x170b9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x170f9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_sleep: usdhc1-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x10059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x10059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x10059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x10059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x10059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x10059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x10059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x10059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x10059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1 + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1 + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1 + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; +}; + +&lm3630a { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; +}; + +®_wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; +}; + +®_vdd1p1 { + vin-supply = <&dcdc2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&dcdc2_reg>; +}; + +®_arm { + vin-supply = <&dcdc3_reg>; +}; + +®_soc { + vin-supply = <&dcdc1_reg>; +}; + +®_pu { + vin-supply = <&dcdc1_reg>; +}; + +&ricoh619 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1_sleep>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; +}; + +&wifi_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; +}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 997b96c..c7d907c 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -55,18 +55,16 @@ device_type = "cpu"; reg = <0x0>; next-level-cache = <&L2>; - operating-points = < + operating-points = /* kHz uV */ - 996000 1275000 - 792000 1175000 - 396000 975000 - >; - fsl,soc-operating-points = < + <996000 1275000>, + <792000 1175000>, + <396000 975000>; + fsl,soc-operating-points = /* ARM kHz SOC-PU uV */ - 996000 1225000 - 792000 1175000 - 396000 1175000 - >; + <996000 1225000>, + <792000 1175000>, + <396000 1175000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>, diff --git a/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts new file mode 100644 index 0000000..a8b0e88 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Device tree for the Kobo Libra H2O ebook reader + * + * Name on mainboard is: 37NB-E70K0M+6A3 + * Serials start with: E70K02 (a number also seen in + * vendor kernel sources) + * + * This mainboard seems to be equipped with different SoCs. + * In the Kobo Libra H2O ebook reader it is an i.MX6SLL + * + * Copyright 2021 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include +#include +#include "imx6sll.dtsi" +#include "e70k02.dtsi" + +/ { + model = "Kobo Libra H2O"; + compatible = "kobo,librah2o", "fsl,imx6sll"; +}; + +&clks { + assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <393216000>; +}; + +&cpu0 { + arm-supply = <&dcdc3_reg>; + soc-supply = <&dcdc1_reg>; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x17059 /* PWR_SW */ + MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x17059 /* HALL_EN */ + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 /* PAGE_UP */ + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 /* PAGE_DOWN */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x79 + MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x79 + MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x79 + MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x79 + MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x79 + MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x79 + MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x79 + MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x79 + MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x79 + MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x79 + MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x79 + MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x79 + MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x79 + MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x79 + MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x79 + MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x79 + MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x79 + MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x79 + MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x79 + MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x79 + MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x79 + MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x79 + MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x79 + MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x79 + MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x79 + MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x79 + MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x79 + MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x79 + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x79 + MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79 + MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1grp-sleep { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2grp-sleep { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x10059 + >; + }; + + pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x10059 /* HWEN */ + >; + }; + + pinctrl_ricoh_gpio: ricoh-gpiogrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x1b8b1 /* ricoh619 chg */ + MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x1b8b1 /* ricoh619 irq */ + MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x17059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 + MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x17059 + MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x17059 + MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x17059 + MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x170b9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 + MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x170b9 + MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x170b9 + MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x170b9 + MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x170f9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 + MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x170b9 + MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x170b9 + MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x170b9 + MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_sleep: usdhc1-sleepgrp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x10059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x10059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x10059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x10059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x10059 + MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x10059 + MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x10059 + MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x10059 + MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x10059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x11059 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x11059 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x11059 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x100c1 + MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x100c1 + MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x100c1 + MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; +}; + +&lm3630a { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; +}; + +®_wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; +}; + +&ricoh619 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1_sleep>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; +}; + +&wifi_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; +}; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 04f8d63..d4a000c 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -51,20 +51,18 @@ device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; - operating-points = < + operating-points = /* kHz uV */ - 996000 1275000 - 792000 1175000 - 396000 1075000 - 198000 975000 - >; - fsl,soc-operating-points = < + <996000 1275000>, + <792000 1175000>, + <396000 1075000>, + <198000 975000>; + fsl,soc-operating-points = /* ARM kHz SOC-PU uV */ - 996000 1175000 - 792000 1175000 - 396000 1175000 - 198000 1175000 - >; + <996000 1175000>, + <792000 1175000>, + <396000 1175000>, + <198000 1175000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; clocks = <&clks IMX6SLL_CLK_ARM>, diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 8516730..fc63343 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -1395,15 +1395,15 @@ }; pcie: pcie@8ffc000 { - compatible = "fsl,imx6sx-pcie", "snps,dw-pcie"; + compatible = "fsl,imx6sx-pcie"; reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>; reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0 0x08f80000 0 0x00010000>, /* downstream I/O */ + <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = ; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi index 19a0626..3cddc68 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi @@ -68,8 +68,11 @@ }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <100000>; status = "okay"; @@ -147,6 +150,13 @@ >; }; + pinctrl_i2c1_gpio: i2cgpiogrp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi index 95e4080..0d4ba94 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi @@ -191,6 +191,7 @@ no-1-8-v; keep-power-in-suspend; wakeup-source; + disable-wp; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts new file mode 100644 index 0000000..61b93cb --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2021 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx6ull-emmc-eval", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi new file mode 100644 index 0000000..a099abf --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2021 Toradex + */ + +#include "imx6ull-colibri.dtsi" + +/ { + aliases { + mmc0 = &usdhc2; /* eMMC */ + mmc1 = &usdhc1; /* MMC 4bit slot */ + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; +}; + +&gpio1 { + gpio-line-names = "SODIMM_8", + "SODIMM_6", + "SODIMM_129", + "SODIMM_89", + "SODIMM_19", + "SODIMM_21", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184", + "SODIMM_4", + "SODIMM_2", + "SODIMM_106", + "SODIMM_71", + "SODIMM_23", + "SODIMM_31", + "SODIMM_99", + "SODIMM_102", + "SODIMM_33", + "SODIMM_35", + "SODIMM_25", + "SODIMM_27", + "SODIMM_36", + "SODIMM_38", + "SODIMM_32", + "SODIMM_34", + "SODIMM_135", + "SODIMM_77", + "SODIMM_100", + "SODIMM_186", + "SODIMM_196", + "SODIMM_194"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_55", + "SODIMM_63", + "SODIMM_178", + "SODIMM_188", + "SODIMM_73", + "SODIMM_30", + "SODIMM_67", + "SODIMM_104", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_190", + "SODIMM_47", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_29", + "SODIMM_37", + "SODIMM_88", + "SODIMM_86", + "SODIMM_92", + "SODIMM_90"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_140", + "SODIMM_59", + "SODIMM_142", + "SODIMM_144", + "SODIMM_133", + "SODIMM_146", + "SODIMM_28", + "SODIMM_75", + "SODIMM_96", + "SODIMM_81", + "SODIMM_94", + "SODIMM_101", + "SODIMM_103", + "SODIMM_79", + "SODIMM_97", + "SODIMM_69", + "SODIMM_98", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_137", + "SODIMM_95", + "SODIMM_107", + "SODIMM_131", + "SODIMM_93", + "", + "SODIMM_138", + "", + "SODIMM_105", + "SODIMM_127"; +}; + +&gpmi { + status = "disabled"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 + &pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7 + &pinctrl_gpmi_gpio>; +}; + +&iomuxc_snvs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2emmc>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; + bus-width = <8>; + keep-power-in-suspend; + no-1-8-v; + non-removable; + vmmc-supply = <®_module_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 0cdbf7b..7f35a06 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2021 Toradex */ #include "imx6ull.dtsi" @@ -345,6 +345,19 @@ >; }; + /* + * With an eMMC instead of a raw NAND device the following pins + * are available at SODIMM pins + */ + pinctrl_gpmi_gpio: gpmi-gpio-grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */ + MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */ + MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x10b0 /* SODIMM 146 */ + MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x10b0 /* SODIMM 142 */ + >; + }; + pinctrl_gpmi_nand: gpmi-nand-grp { fsl,pins = < MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 @@ -533,6 +546,21 @@ >; }; + pinctrl_usdhc2emmc: usdhc2emmcgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + >; + }; + pinctrl_wdog: wdog-grp { fsl,pins = < MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi index 5e6bef2..49086c6 100644 --- a/arch/arm/boot/dts/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/imx7-mba7.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Include file for TQ Systems MBa7 carrier board. + * Device Tree Include file for TQ-Systems MBa7 carrier board. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel * Copyright (C) 2019 Bruno Thomsen * @@ -236,6 +236,44 @@ }; }; +&flash0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot@0 { + label = "U-Boot"; + reg = <0x0 0xd0000>; + }; + + env1@d0000 { + label = "ENV1"; + reg = <0xd0000 0x10000>; + }; + + env2@e0000 { + label = "ENV2"; + reg = <0xe0000 0x10000>; + }; + + dtb@f0000 { + label = "DTB"; + reg = <0xf0000 0x10000>; + }; + + linux@100000 { + label = "Linux"; + reg = <0x100000 0x700000>; + }; + + rootfs@800000 { + label = "RootFS"; + reg = <0x800000 0x3800000>; + }; + }; +}; + &flexcan1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi index 8773344..fe42b0a 100644 --- a/arch/arm/boot/dts/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7-tqma7.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB. + * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel * Copyright (C) 2019 Bruno Thomsen */ @@ -19,6 +19,16 @@ cpu-supply = <&sw1a_reg>; }; +&gpio2 { + /* Configured as pullup by QSPI pin group */ + qspi-reset-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "qspi-reset"; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -160,6 +170,25 @@ >; }; + pinctrl_qspi: qspigrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x5A + MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x5A + MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x5A + MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x5A + MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x11 + MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x54 + MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x54 + >; + }; + + pinctrl_qspi_reset: qspi_resetgrp { + fsl,pins = < + /* #QSPI_RESET */ + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x52 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 @@ -217,6 +246,20 @@ }; }; +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + &sdma { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts index 36ef6a3..32bf9fa 100644 --- a/arch/arm/boot/dts/imx7d-mba7.dts +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board. + * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel * Copyright (C) 2019 Bruno Thomsen */ @@ -13,7 +13,7 @@ #include "imx7-mba7.dtsi" / { - model = "TQ Systems TQMa7D board on MBa7 carrier board"; + model = "TQ-Systems TQMa7D board on MBa7 carrier board"; compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d"; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 4a0d837..7813ef9 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -45,7 +45,7 @@ pinctrl-0 = <&pinctrl_spi4>; gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi index 598aed1..3ee2017 100644 --- a/arch/arm/boot/dts/imx7d-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC. + * Device Tree Include file for TQ-Systems TQMa7D board with NXP i.MX7Dual SoC. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel * Copyright (C) 2019 Bruno Thomsen */ diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index b0bcfa9..b773597 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -164,7 +164,7 @@ }; pcie: pcie@33800000 { - compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; + compatible = "fsl,imx7d-pcie"; reg = <0x33800000 0x4000>, <0x4ff00000 0x80000>; reg-names = "dbi", "config"; @@ -172,10 +172,9 @@ #size-cells = <2>; device_type = "pci"; bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */ + <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ num-lanes = <1>; - num-viewport = <4>; interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts index d7d3f53..8e4cf58 100644 --- a/arch/arm/boot/dts/imx7s-mba7.dts +++ b/arch/arm/boot/dts/imx7s-mba7.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board. + * Device Tree Source for TQ-Systems TQMa7S board on MBa7 carrier board. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel * Copyright (C) 2019 Bruno Thomsen */ @@ -13,6 +13,6 @@ #include "imx7-mba7.dtsi" / { - model = "TQ Systems TQMa7S board on MBa7 carrier board"; + model = "TQ-Systems TQMa7S board on MBa7 carrier board"; compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s"; }; diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/imx7s-tqma7.dtsi index 5f5433e..7a190fd 100644 --- a/arch/arm/boot/dts/imx7s-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7s-tqma7.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC. + * Device Tree Include file for TQ-Systems TQMa7S board with NXP i.MX7Solo SoC. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel * Copyright (C) 2019 Bruno Thomsen */ diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 602f74d..ad868cf 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -15,10 +15,14 @@ core-module@10000000 { compatible = "arm,core-module-integrator", "syscon", "simple-mfd"; reg = <0x10000000 0x200>; + ranges = <0x0 0x10000000 0x200>; + #address-cells = <1>; + #size-cells = <1>; /* Use core module LED to indicate CPU load */ - led@c.0 { + led@c,0 { compatible = "register-bit-led"; + reg = <0x0c 0x04>; offset = <0x0c>; mask = <0x01>; label = "integrator:core_module"; @@ -104,35 +108,42 @@ interrupts = <4>; }; - syscon { + syscon@1a000000 { /* Debug registers mapped as syscon */ compatible = "syscon", "simple-mfd"; reg = <0x1a000000 0x10>; + ranges = <0x0 0x1a000000 0x10>; + #address-cells = <1>; + #size-cells = <1>; - led@4.0 { + led@4,0 { compatible = "register-bit-led"; + reg = <0x04 0x04>; offset = <0x04>; mask = <0x01>; label = "integrator:green0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@4.1 { + led@4,1 { compatible = "register-bit-led"; + reg = <0x04 0x04>; offset = <0x04>; mask = <0x02>; label = "integrator:yellow"; default-state = "off"; }; - led@4.2 { + led@4,2 { compatible = "register-bit-led"; + reg = <0x04 0x04>; offset = <0x04>; mask = <0x04>; label = "integrator:red"; default-state = "off"; }; - led@4.3 { + led@4,3 { compatible = "register-bit-led"; + reg = <0x04 0x04>; offset = <0x04>; mask = <0x08>; label = "integrator:green1"; diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts index 0614f82..d47bfb6 100644 --- a/arch/arm/boot/dts/integratorap-im-pd1.dts +++ b/arch/arm/boot/dts/integratorap-im-pd1.dts @@ -28,9 +28,13 @@ syscon@0 { compatible = "arm,im-pd1-syscon", "syscon"; reg = <0x00000000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; - vco1: vco1-clock { + vco1: clock-controller@0 { compatible = "arm,impd1-vco1"; + reg = <0x00 0x04>; #clock-cells = <0>; lock-offset = <0x08>; vco-offset = <0x00>; @@ -38,8 +42,9 @@ clock-output-names = "IM-PD1-VCO1"; }; - vco2: vco2-clock { + vco2: clock-controller@4 { compatible = "arm,impd1-vco2"; + reg = <0x04 0x04>; #clock-cells = <0>; lock-offset = <0x08>; vco-offset = <0x04>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 67d1f9b..9b652cc 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -88,8 +88,9 @@ }; /* Oscillator on the core module, clocks the CPU core */ - cmosc: cmosc@24M { + cmosc: clock-controller@8 { compatible = "arm,syscon-icst525-integratorap-cm"; + reg = <0x08 0x04>; #clock-cells = <0>; lock-offset = <0x14>; vco-offset = <0x08>; @@ -97,8 +98,9 @@ }; /* Auxilary oscillator on the core module, 32.369MHz at boot */ - auxosc: auxosc@24M { + auxosc: clock-controller@1c { compatible = "arm,syscon-icst525"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x14>; vco-offset = <0x1c>; @@ -109,13 +111,17 @@ syscon { compatible = "arm,integrator-ap-syscon", "syscon"; reg = <0x11000000 0x100>; + ranges = <0x0 0x11000000 0x100>; + #size-cells = <1>; + #address-cells = <1>; /* * SYSCLK clocks PCIv3 bridge, system controller and the * logic modules. */ - sysclk: apsys@24M { + sysclk: clock-controller@4 { compatible = "arm,syscon-icst525-integratorap-sys"; + reg = <0x04 0x04>; #clock-cells = <0>; lock-offset = <0x1c>; vco-offset = <0x04>; @@ -123,8 +129,9 @@ }; /* One-bit control for the PCI bus clock (33 or 25 MHz) */ - pciclk: pciclk@24M { + pciclk: clock-controller@4,8 { compatible = "arm,syscon-icst525-integratorap-pci"; + reg = <0x04 0x04>; #clock-cells = <0>; lock-offset = <0x1c>; vco-offset = <0x04>; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index 01fa229..38fc7e8 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -92,8 +92,9 @@ }; /* Oscillator on the core module, clocks the CPU core */ - cmcore: cmosc@24M { + cmcore: clock-controller@8 { compatible = "arm,syscon-icst525-integratorcp-cm-core"; + reg = <0x08 0x04>; #clock-cells = <0>; lock-offset = <0x14>; vco-offset = <0x08>; @@ -101,8 +102,9 @@ }; /* Oscillator on the core module, clocks the memory bus */ - cmmem: cmosc@24M { + cmmem: clock-controller@8,12 { compatible = "arm,syscon-icst525-integratorcp-cm-mem"; + reg = <0x08 0x04>; #clock-cells = <0>; lock-offset = <0x14>; vco-offset = <0x08>; @@ -110,8 +112,9 @@ }; /* Auxilary oscillator on the core module, clocks the CLCD */ - auxosc: auxosc@24M { + auxosc: clock-controller@1c { compatible = "arm,syscon-icst525"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x14>; vco-offset = <0x1c>; diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts index 44c017b..bd4230d 100644 --- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts +++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts @@ -63,6 +63,8 @@ * We have slots (IDSEL) 1 and 2 with one assigned IRQ * each handling all IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts index 7200126..92b987b 100644 --- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts +++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts @@ -120,6 +120,8 @@ * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt * per slot. This interrupt is shared (OR:ed) by all four pins. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts index 8b32e9f..5ab09fb 100644 --- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts +++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts @@ -129,6 +129,8 @@ * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3. * Only slot 3 have three IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts index 77e78c6..598586f 100644 --- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts +++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts @@ -106,6 +106,8 @@ * Written based on the FSG-3 PCI boardfile. * We have slots 12, 13 & 14 (IDSEL) with one IRQ each. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 12 */ <0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts index a20277f..a5943f5 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts @@ -115,6 +115,8 @@ * * We have up to 4 slots (IDSEL) with 4 swizzled IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts index 8c18d80..cbc87b3 100644 --- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts +++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts @@ -115,6 +115,8 @@ * Taken from NAS 100D PCI boardfile (nas100d-pci.c) * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts index 002a870..f17cab1 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts @@ -68,6 +68,8 @@ * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ * for 12 & 13 and one for 14. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 12 */ <0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts index e3a32b0..0edc592 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -122,6 +122,8 @@ * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant * We have slots (IDSEL) 1, 2 and 3. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts index 6b28dda..5e7e31b 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts @@ -123,6 +123,8 @@ * We have up to 2 slots (IDSEL) with 2 swizzled IRQs. * Derived from the GTWX5715 PCI boardfile. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 0 */ <0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts index 04a0f71..a570094 100644 --- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts @@ -62,6 +62,8 @@ * We have slots (IDSEL) 1 and 2 with one assigned IRQ * each handling all IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */ diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts index 84e6aec..cf4010d 100644 --- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -131,6 +131,8 @@ * have instead assumed that they are rotated (swizzled) like * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi index b6ff614..1dd4a65 100644 --- a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi +++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi @@ -74,5 +74,13 @@ queue-rx = <&qmgr 0>; queue-txready = <&qmgr 0>; }; + + ptp-timer@c8010000 { + compatible = "intel,ixp46x-ptp-timer"; + reg = <0xc8010000 0x1000>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "master", "slave"; + }; }; }; diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi index c1d9c49..146352b 100644 --- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi @@ -106,6 +106,8 @@ * PCI slots on the BIXMB425BD base card. * We have up to 4 slots (IDSEL) with 4 swizzled IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi index e5af2d4..46fede0 100644 --- a/arch/arm/boot/dts/intel-ixp4xx.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi @@ -78,8 +78,6 @@ dma-ranges = <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 7>; /* Each unique DTS using PCI must specify the swizzling */ }; diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index bc85767..849034a 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -158,6 +158,8 @@ status = "okay"; phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <3>; micrel,led-mode = <1>; }; diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index 74a6760..f1acb97 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -1,49 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2013-2014 Freescale Semiconductor, Inc. * Copyright 2018 NXP - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -67,19 +25,12 @@ clock-frequency = <24576000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { @@ -231,9 +182,9 @@ #address-cells = <2>; #size-cells = <1>; /* NOR, NAND Flashes and FPGA on board */ - ranges = <0x0 0x0 0x0 0x60000000 0x08000000 - 0x2 0x0 0x0 0x7e800000 0x00010000 - 0x3 0x0 0x0 0x7fb00000 0x00000100>; + ranges = <0x0 0x0 0x0 0x60000000 0x08000000>, + <0x2 0x0 0x0 0x7e800000 0x00010000>, + <0x3 0x0 0x0 0x7fb00000 0x00000100>; status = "okay"; nor@0,0 { @@ -254,7 +205,7 @@ fpga: board-control@3,0 { #address-cells = <1>; #size-cells = <1>; - compatible = "simple-bus"; + compatible = "simple-mfd"; reg = <0x3 0x0 0x0000100>; bank-width = <1>; device-width = <1>; @@ -328,6 +279,20 @@ }; }; +&qspi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + &sai2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts index 9d8f0c2..ff0ffb2 100644 --- a/arch/arm/boot/dts/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -8,6 +8,7 @@ / { model = "NXP LS1021A-TSN Board"; + compatible = "fsl,ls1021a-tsn", "fsl,ls1021a"; sys_mclk: clock-mclk { compatible = "fixed-clock"; @@ -136,7 +137,6 @@ /* 3 axis accelerometer */ accelerometer@1e { compatible = "fsl,fxls8471"; - position = <0>; reg = <0x1e>; }; @@ -251,7 +251,7 @@ flash@0 { /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ - compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 5edf001..f5c0387 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -1,49 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2013-2014 Freescale Semiconductor, Inc. * Copyright 2018 NXP - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -65,19 +23,12 @@ clock-frequency = <24576000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 4fce814..2e69d6e 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2013-2014 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include @@ -51,7 +9,6 @@ / { #address-cells = <2>; #size-cells = <2>; - compatible = "fsl,ls1021a"; interrupt-parent = <&gic>; aliases { @@ -90,7 +47,7 @@ }; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x0>; }; @@ -169,6 +126,7 @@ compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = ; + status = "disabled"; }; dcfg: dcfg@1ee0000 { @@ -290,78 +248,45 @@ reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = ; fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; - fsl,tmu-calibration = <0x00000000 0x00000020 - 0x00000001 0x00000024 - 0x00000002 0x0000002a - 0x00000003 0x00000032 - 0x00000004 0x00000038 - 0x00000005 0x0000003e - 0x00000006 0x00000043 - 0x00000007 0x0000004a - 0x00000008 0x00000050 - 0x00000009 0x00000059 - 0x0000000a 0x0000005f - 0x0000000b 0x00000066 - - 0x00010000 0x00000023 - 0x00010001 0x0000002b - 0x00010002 0x00000033 - 0x00010003 0x0000003a - 0x00010004 0x00000042 - 0x00010005 0x0000004a - 0x00010006 0x00000054 - 0x00010007 0x0000005c - 0x00010008 0x00000065 - 0x00010009 0x0000006f - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000048 - 0x00020004 0x00000054 - 0x00020005 0x00000060 - 0x00020006 0x0000006c - - 0x00030000 0x00000025 - 0x00030001 0x00000033 - 0x00030002 0x00000043 - 0x00030003 0x00000055>; + fsl,tmu-calibration = <0x00000000 0x00000020>, + <0x00000001 0x00000024>, + <0x00000002 0x0000002a>, + <0x00000003 0x00000032>, + <0x00000004 0x00000038>, + <0x00000005 0x0000003e>, + <0x00000006 0x00000043>, + <0x00000007 0x0000004a>, + <0x00000008 0x00000050>, + <0x00000009 0x00000059>, + <0x0000000a 0x0000005f>, + <0x0000000b 0x00000066>, + + <0x00010000 0x00000023>, + <0x00010001 0x0000002b>, + <0x00010002 0x00000033>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000054>, + <0x00010007 0x0000005c>, + <0x00010008 0x00000065>, + <0x00010009 0x0000006f>, + + <0x00020000 0x00000029>, + <0x00020001 0x00000033>, + <0x00020002 0x0000003d>, + <0x00020003 0x00000048>, + <0x00020004 0x00000054>, + <0x00020005 0x00000060>, + <0x00020006 0x0000006c>, + + <0x00030000 0x00000025>, + <0x00030001 0x00000033>, + <0x00030002 0x00000043>, + <0x00030003 0x00000055>; #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - dspi0: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; @@ -394,10 +319,9 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 39>, <&edma0 1 38>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 38>, <&edma0 1 39>; status = "disabled"; }; @@ -407,10 +331,9 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 37>, <&edma0 1 36>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 36>, <&edma0 1 37>; status = "disabled"; }; @@ -420,10 +343,9 @@ #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 35>, <&edma0 1 34>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 34>, <&edma0 1 35>; status = "disabled"; }; @@ -884,8 +806,8 @@ pcie@3400000 { compatible = "fsl,ls1021a-pcie"; - reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */ + <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = ; /* controller interrupt */ fsl,pcie-scfg = <&scfg 0>; @@ -894,8 +816,8 @@ device_type = "pci"; num-viewport = <6>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */ + <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ msi-parent = <&msi1>, <&msi2>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; @@ -908,8 +830,8 @@ pcie@3500000 { compatible = "fsl,ls1021a-pcie"; - reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ - 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */ + <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = ; fsl,pcie-scfg = <&scfg 1>; @@ -918,8 +840,8 @@ device_type = "pci"; num-viewport = <6>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */ + <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ msi-parent = <&msi1>, <&msi2>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; @@ -992,6 +914,7 @@ ; interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1"; + #dma-cells = <2>; dma-channels = <8>; block-number = <1>; block-offset = <0x1000>; @@ -1005,6 +928,7 @@ compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1ee2140 0x0 0x8>; #fsl,rcpm-wakeup-cells = <2>; + #power-domain-cells = <0>; }; ftm_alarm0: timer0@29d0000 { @@ -1016,4 +940,37 @@ big-endian; }; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi index 37f5023..b99577d 100644 --- a/arch/arm/boot/dts/mps2.dtsi +++ b/arch/arm/boot/dts/mps2.dtsi @@ -216,8 +216,13 @@ compatible = "syscon", "simple-mfd"; reg = <0x8000 0x10>; - led0 { + ranges = <0x0 0x8000 0x10>; + #address-cells = <1>; + #size-cells = <1>; + + led@0,0 { compatible = "register-bit-led"; + reg = <0x00 0x04>; offset = <0x0>; mask = <0x01>; label = "userled:0"; @@ -225,8 +230,9 @@ default-state = "on"; }; - led1 { + led@0,1 { compatible = "register-bit-led"; + reg = <0x00 0x04>; offset = <0x0>; mask = <0x02>; label = "userled:1"; diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi index 2273295..89ebfe4 100644 --- a/arch/arm/boot/dts/mstar-v7.dtsi +++ b/arch/arm/boot/dts/mstar-v7.dtsi @@ -39,6 +39,7 @@ * u-boot is broken */ clock-frequency = <6000000>; + arm,cpu-registers-not-fw-configured; }; pmu: pmu { @@ -109,12 +110,20 @@ mask = <0x79>; }; + rtc@2400 { + compatible = "mstar,msc313-rtc"; + reg = <0x2400 0x40>; + clocks = <&xtal_div2>; + interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + }; + watchdog@6000 { compatible = "mstar,msc313e-wdt"; reg = <0x6000 0x1f>; clocks = <&xtal_div2>; }; + intc_fiq: interrupt-controller@201310 { compatible = "mstar,mst-intc"; reg = <0x201310 0x40>; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index a7d62db..f484836 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -585,6 +585,39 @@ status = "disabled"; }; + usb0: usb@11200000 { + compatible = "mediatek,mt7623-musb", + "mediatek,mtk-musb"; + reg = <0 0x11200000 0 0x1000>; + interrupts = ; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + status = "disabled"; + }; + + u2phy1: t-phy@11210000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; + reg = <0 0x11210000 0 0x0800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port2: usb-phy@11210800 { + reg = <0 0x11210800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + audsys: clock-controller@11220000 { compatible = "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi index 0735a1f..d304b62 100644 --- a/arch/arm/boot/dts/mt7623a.dtsi +++ b/arch/arm/boot/dts/mt7623a.dtsi @@ -35,6 +35,10 @@ clock-names = "ethif"; }; +&usb0 { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>; +}; + &usb1 { power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; }; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index e96aa0e..027c1b0 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -366,6 +366,14 @@ status = "okay"; }; +&pio { + musb_pins: musb { + pins-musb { + pinmux = ; + }; + }; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm_pins_a>; @@ -396,6 +404,19 @@ status = "okay"; }; +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&musb_pins>; + status = "okay"; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; + }; +}; + &usb1 { vusb33-supply = <®_3p3v>; vbus-supply = <®_5v>; @@ -408,6 +429,10 @@ status = "okay"; }; +&u2phy1 { + status = "okay"; +}; + &u3phy1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts index 9980c10..eb536cb 100644 --- a/arch/arm/boot/dts/mt7629-rfb.dts +++ b/arch/arm/boot/dts/mt7629-rfb.dts @@ -140,9 +140,10 @@ }; }; -&pcie { +&pcie1 { pinctrl-names = "default"; pinctrl-0 = <&pcie_pins>; + status = "okay"; }; &pciephy1 { diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 874043f..46fc236 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -361,16 +361,21 @@ #reset-cells = <1>; }; - pcie: pcie@1a140000 { + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0x1a140000 0x1000>; + }; + + pcie1: pcie@1a145000 { compatible = "mediatek,mt7629-pcie"; device_type = "pci"; - reg = <0x1a140000 0x1000>, - <0x1a145000 0x1000>; - reg-names = "subsys","port1"; + reg = <0x1a145000 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; + interrupts = ; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, <&pciesys CLK_PCIE_P1_AUX_EN>, @@ -391,26 +396,18 @@ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>; + status = "disabled"; - pcie1: pcie@1,0 { - device_type = "pci"; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - num-lanes = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index ded7e8f..ce6c235 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -25,8 +25,8 @@ compatible = "smsc,lan9221", "smsc,lan9115"; bank-width = <2>; gpmc,device-width = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <5>; gpmc,cs-rd-off-ns = <150>; gpmc,cs-wr-off-ns = <150>; diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi index 7f6aefd..e7534fe 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi @@ -29,7 +29,7 @@ compatible = "smsc,lan9221","smsc,lan9115"; bank-width = <2>; - gpmc,mux-add-data; + gpmc,mux-add-data = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <42>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index d4ad9e5..1e96c86 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -27,8 +27,8 @@ gpmc,mux-add-data = <0>; gpmc,device-width = <1>; gpmc,wait-pin = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <5>; gpmc,cs-rd-off-ns = <155>; gpmc,cs-wr-off-ns = <155>; diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts index 7d27e90..2070706 100644 --- a/arch/arm/boot/dts/omap2430-sdp.dts +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -43,8 +43,8 @@ gpmc,sync-clk-ps = <0>; gpmc,mux-add-data = <2>; gpmc,device-width = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <6>; gpmc,cs-rd-off-ns = <187>; gpmc,cs-wr-off-ns = <187>; diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi index 1ed8378..a9069cc 100644 --- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi @@ -10,7 +10,7 @@ #include -cpu_thermal: cpu_thermal { +cpu_thermal: cpu-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ coefficients = <0 20000>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 2c19d6e..5e55198 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -267,8 +267,8 @@ gpmc,mux-add-data = <0>; gpmc,device-width = <1>; gpmc,wait-pin = <0>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <6>; gpmc,cs-rd-off-ns = <180>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 938cc69..7e3d814 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -104,16 +104,16 @@ #sound-dai-cells = <0>; }; - spi_lcd: spi_lcd { + spi_lcd: spi { compatible = "spi-gpio"; #address-cells = <0x1>; #size-cells = <0x0>; pinctrl-names = "default"; pinctrl-0 = <&spi_gpio_pins>; - gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; num-chipselects = <1>; @@ -508,6 +508,8 @@ pinctrl-0 = <&bmp085_pins>; interrupt-parent = <&gpio4>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ + vdda-supply = <&vio>; + vddd-supply = <&vio>; }; /* accelerometer */ @@ -515,7 +517,7 @@ compatible = "bosch,bma180"; reg = <0x41>; pinctrl-names = "default"; - pintcrl-0 = <&bma180_pins>; + pinctrl-0 = <&bma180_pins>; interrupt-parent = <&gpio4>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ }; @@ -540,28 +542,29 @@ gpio-controller; #gpio-cells = <2>; - gta04_led0: red_aux@0 { + gta04_led0: led@0 { label = "gta04:red:aux"; reg = <0x0>; }; - gta04_led1: green_aux@1 { + gta04_led1: led@1 { label = "gta04:green:aux"; reg = <0x1>; }; - gta04_led3: red_power@3 { + gta04_led3: led@3 { label = "gta04:red:power"; reg = <0x3>; linux,default-trigger = "default-on"; }; - gta04_led4: green_power@4 { + gta04_led4: led@4 { label = "gta04:green:power"; reg = <0x4>; }; - wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */ + wifi_reset: led@6 { + /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */ reg = <0x6>; compatible = "gpio"; }; diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts index b4c4ca7..0b5bd73 100644 --- a/arch/arm/boot/dts/omap3-gta04a5.dts +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -133,5 +133,7 @@ bme280@76 { compatible = "bosch,bme280"; reg = <0x76>; + vdda-supply = <&vio>; + vddd-supply = <&vio>; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index e5da3bc..218a10c 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -22,7 +22,7 @@ compatible = "smsc,lan9221","smsc,lan9115"; bank-width = <2>; - gpmc,mux-add-data; + gpmc,mux-add-data = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <42>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index fb9842f..5ec0893 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -108,8 +108,8 @@ reg = <4 0 0xff>; bank-width = <2>; gpmc,device-width = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <5>; gpmc,cs-rd-off-ns = <150>; gpmc,cs-wr-off-ns = <150>; diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts new file mode 100644 index 0000000..f350c4e --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/ { + model = "LG G Watch R"; + compatible = "lg,lenok", "qcom,apq8026"; + qcom,board-id = <132 0x0a>; + qcom,msm-id = <199 0x20000>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <384000>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l22>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&rpm_requests { + pm8226-regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s1: s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1275000>; + }; + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; +}; + +&tlmm { + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + touch_pins: touch { + irq { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-down; + input-enable; + }; + + reset { + pins = "gpio16"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + output-high; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index e1189e9..d664ccd 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -357,8 +357,8 @@ }; mpps@50 { - dragon_cm3605_mpps: cm3605-mpps { - pinconf { + dragon_cm3605_mpps: cm3605-mpps-state { + mpp5 { pins = "mpp5"; function = "analog"; input-enable; @@ -899,7 +899,7 @@ }; amba { /* Internal 3.69 GiB eMMC */ - sdcc@12400000 { + mmc@12400000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_sdcc1_pins>; @@ -908,7 +908,7 @@ }; /* External micro SD card, directly connected, pulled up to 2.85 V */ - sdcc@12180000 { + mmc@12180000 { status = "okay"; /* Enable SSBI GPIO 22 as input, use for card detect */ pinctrl-names = "default"; @@ -922,7 +922,7 @@ * Second external micro SD card, using two TXB104RGYR levelshifters * to lift from 1.8 V to 2.85 V */ - sdcc@12200000 { + mmc@12200000 { status = "okay"; /* Enable SSBI GPIO 26 as input, use for card detect */ pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index 3bce47d..9a83533 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -335,7 +335,7 @@ amba { /* eMMC */ - sdcc@12400000 { + mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 0148148..e068a8d 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -220,14 +220,14 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; pinctrl-names = "default"; @@ -235,7 +235,7 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; vqmmc-supply = <&v3p3_fixed>; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index d0a17b5..2638b38 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -314,14 +314,14 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&pm8921_l6>; pinctrl-names = "default"; @@ -329,7 +329,7 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { status = "okay"; vmmc-supply = <&ext_3p3v>; vqmmc-supply = <&pm8921_lvs1>; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index 72e47bd..f8c97ef 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -374,14 +374,14 @@ }; amba { - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&pm8921_l6>; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index d1c1c6a..4d562c9 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -95,13 +95,13 @@ }; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0>; }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -122,7 +122,7 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -143,7 +143,7 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -164,7 +164,7 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -683,12 +683,11 @@ pm8821_mpps: mpps@50 { compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; reg = <0x50>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pm8821_mpps 0 0 4>; }; }; }; @@ -726,19 +725,9 @@ reg = <0x50>; gpio-controller; #gpio-cells = <2>; - interrupts = - <128 IRQ_TYPE_NONE>, - <129 IRQ_TYPE_NONE>, - <130 IRQ_TYPE_NONE>, - <131 IRQ_TYPE_NONE>, - <132 IRQ_TYPE_NONE>, - <133 IRQ_TYPE_NONE>, - <134 IRQ_TYPE_NONE>, - <135 IRQ_TYPE_NONE>, - <136 IRQ_TYPE_NONE>, - <137 IRQ_TYPE_NONE>, - <138 IRQ_TYPE_NONE>, - <139 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8921_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; }; rtc@11d { @@ -1084,7 +1073,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; pinctrl-names = "default"; @@ -1104,7 +1093,7 @@ dma-names = "tx", "rx"; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -1122,7 +1111,7 @@ dma-names = "tx", "rx"; }; - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -1229,13 +1218,17 @@ &gfx3d1 30 &gfx3d1 31>; - qcom,gpu-pwrlevels { - compatible = "qcom,gpu-pwrlevels"; - qcom,gpu-pwrlevel@0 { - qcom,gpu-freq = <450000000>; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <450000000>; }; - qcom,gpu-pwrlevel@1 { - qcom,gpu-freq = <27000000>; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; }; }; }; @@ -1419,9 +1412,9 @@ clocks = <&mmcc HDMI_APP_CLK>, <&mmcc HDMI_M_AHB_CLK>, <&mmcc HDMI_S_AHB_CLK>; - clock-names = "core_clk", - "master_iface_clk", - "slave_iface_clk"; + clock-names = "core", + "master_iface", + "slave_iface"; phys = <&hdmi_phy>; phy-names = "hdmi-phy"; @@ -1452,7 +1445,7 @@ "hdmi_pll"; clocks = <&mmcc HDMI_S_AHB_CLK>; - clock-names = "slave_iface_clk"; + clock-names = "slave_iface"; #phy-cells = <0>; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index bf6a035..52240fc 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -102,7 +102,7 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -122,7 +122,7 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -142,7 +142,7 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -162,7 +162,7 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts index 0d92f1b..ddaa273 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts @@ -18,5 +18,5 @@ / { model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; - + compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index c93b216..0c10d9e 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -18,7 +18,6 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; - compatible = "qcom,ipq4019"; aliases { serial0 = &blsp1_uart1; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts index b0f476f..a7b1201 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -5,7 +5,7 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1"; - compatible = "qcom,ipq4019-dk04.1-c1"; + compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019"; soc { dma@7984000 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts index 2d1c4c6..7765247 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts @@ -5,5 +5,5 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3"; - compatible = "qcom,ipq4019-ap-dk04.1-c3"; + compatible = "qcom,ipq4019-ap-dk04.1-c3", "qcom,ipq4019"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index f343a22..06f9f2c 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -5,7 +5,7 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1"; - compatible = "qcom,ipq4019-ap-dk07.1-c1"; + compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019"; soc { pci@40000000 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts index 582acb6..bd3553d 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts @@ -5,7 +5,7 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2"; - compatible = "qcom,ipq4019-ap-dk07.1-c2"; + compatible = "qcom,ipq4019-ap-dk07.1-c2", "qcom,ipq4019"; soc { pinctrl@1000000 { diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index e5b9b9c..b63d01d 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -3,7 +3,7 @@ / { model = "Qualcomm Technologies, Inc. IPQ8064/AP-148"; - compatible = "qcom,ipq8064-ap148"; + compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; soc { pinmux@800000 { diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts index f7ea2e5..596d129 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -19,12 +19,12 @@ stdout-path = "serial0:115200n8"; }; - memory@0 { + memory@42000000 { reg = <0x42000000 0x3e000000>; device_type = "memory"; }; - mdio0: mdio@0 { + mdio0: mdio-0 { status = "okay"; compatible = "virtual,mdio-gpio"; gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, @@ -91,7 +91,7 @@ }; }; - mdio1: mdio@1 { + mdio1: mdio-1 { status = "okay"; compatible = "virtual,mdio-gpio"; gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>, @@ -172,7 +172,7 @@ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - norflash: s25fl016k@0 { + norflash: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 4139d38..1148131 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -49,7 +49,7 @@ }; thermal-zones { - tsens_tz_sensor0 { + sensor0-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 0>; @@ -69,7 +69,7 @@ }; }; - tsens_tz_sensor1 { + sensor1-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 1>; @@ -89,7 +89,7 @@ }; }; - tsens_tz_sensor2 { + sensor2-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 2>; @@ -109,7 +109,7 @@ }; }; - tsens_tz_sensor3 { + sensor3-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 3>; @@ -129,7 +129,7 @@ }; }; - tsens_tz_sensor4 { + sensor4-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 4>; @@ -149,7 +149,7 @@ }; }; - tsens_tz_sensor5 { + sensor5-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 5>; @@ -169,7 +169,7 @@ }; }; - tsens_tz_sensor6 { + sensor6-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 6>; @@ -189,7 +189,7 @@ }; }; - tsens_tz_sensor7 { + sensor7-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 7>; @@ -209,7 +209,7 @@ }; }; - tsens_tz_sensor8 { + sensor8-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 8>; @@ -229,7 +229,7 @@ }; }; - tsens_tz_sensor9 { + sensor9-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 9>; @@ -249,7 +249,7 @@ }; }; - tsens_tz_sensor10 { + sensor10-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 10>; @@ -1181,7 +1181,7 @@ #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -1201,7 +1201,7 @@ dma-names = "tx", "rx"; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi index a725b73..10ad929 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi @@ -49,7 +49,7 @@ model = "Sierra Wireless WP8548 Module"; compatible = "swir,wp8548", "qcom,mdm9615"; - memory { + memory@48000000 { device_type = "memory"; reg = <0x48000000 0x7F00000>; }; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index dda2cee..c32415f 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -300,18 +300,14 @@ pull-up; }; - pmicmpp: mpp@50 { + pmicmpp: mpps@50 { compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x50>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmicmpp 0 0 6>; }; rtc@11d { @@ -358,7 +354,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12180000 { + sdcc1: mmc@12180000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -378,7 +374,7 @@ assigned-clock-rates = <400000>; }; - sdcc2: sdcc@12140000 { + sdcc2: mmc@12140000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 2de69d5..7d48599 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -7,6 +7,7 @@ #include #include +#include / { #address-cells = <1>; @@ -20,6 +21,70 @@ reg = <0x0 0x0>; }; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8226", "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; + + #hwlock-cells = <1>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_region: smem@3000000 { + reg = <0x3000000 0x100000>; + no-map; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8226"; + qcom,smd-channels = "rpm_requests"; + }; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -34,6 +99,136 @@ #interrupt-cells = <3>; }; + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + + sdhc_1: sdhci@f9824900 { + compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + + sdhc_2: sdhci@f98a4900 { + compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + + sdhc_3: sdhci@f9864900 { + compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_APPS_CLK>, + <&gcc GCC_SDCC3_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + + blsp1_uart3: serial@f991f000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991f000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart4: serial@f9920000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf9920000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c1_pins>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@f9924000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c2_pins>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c3_pins>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c4: i2c@f9926000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9926000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c4_pins>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c5: i2c@f9927000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9927000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c5_pins>; + #address-cells = <1>; + #size-cells = <0>; + }; + gcc: clock-controller@fc400000 { compatible = "qcom,gcc-msm8226"; reg = <0xfc400000 0x4000>; @@ -51,15 +246,41 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = ; - }; - blsp1_uart3: serial@f991f000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991f000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; + blsp1_i2c1_pins: blsp1-i2c1 { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_pins: blsp1-i2c2 { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_pins: blsp1-i2c3 { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_pins: blsp1-i2c4 { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c5_pins: blsp1-i2c5 { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; }; restart@fc4ab000 { @@ -67,6 +288,22 @@ reg = <0xfc4ab000 0x4>; }; + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + rng@f9bff000 { compatible = "qcom,prng"; reg = <0xf9bff000 0x200>; @@ -131,6 +368,16 @@ status = "disabled"; }; }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; }; timer { diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 6a321cc..414280d 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -35,13 +35,13 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&vsdcc_fixed>; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&vsdcc_fixed>; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 480fc08..1e8aab3 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -307,20 +307,9 @@ reg = <0x50>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&pm8058>; - interrupts = - <128 IRQ_TYPE_NONE>, - <129 IRQ_TYPE_NONE>, - <130 IRQ_TYPE_NONE>, - <131 IRQ_TYPE_NONE>, - <132 IRQ_TYPE_NONE>, - <133 IRQ_TYPE_NONE>, - <134 IRQ_TYPE_NONE>, - <135 IRQ_TYPE_NONE>, - <136 IRQ_TYPE_NONE>, - <137 IRQ_TYPE_NONE>, - <138 IRQ_TYPE_NONE>, - <139 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8058_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; }; pwrkey@1c { @@ -494,7 +483,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -510,7 +499,7 @@ cap-mmc-highspeed; }; - sdcc2: sdcc@12140000 { + sdcc2: mmc@12140000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -525,7 +514,7 @@ cap-mmc-highspeed; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -541,7 +530,7 @@ no-1-8-v; }; - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -556,7 +545,7 @@ cap-mmc-highspeed; }; - sdcc5: sdcc@12200000 { + sdcc5: mmc@12200000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts new file mode 100644 index 0000000..dee2c20 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-serranove.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/arch/arm/boot/dts/qcom-msm8916-smp.dtsi b/arch/arm/boot/dts/qcom-msm8916-smp.dtsi new file mode 100644 index 0000000..36328db --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-smp.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/ { + cpus { + cpu@0 { + enable-method = "qcom,msm8916-smp"; + }; + cpu@1 { + enable-method = "qcom,msm8916-smp"; + }; + cpu@2 { + enable-method = "qcom,msm8916-smp"; + }; + cpu@3 { + enable-method = "qcom,msm8916-smp"; + }; + + idle-states { + /delete-property/ entry-method; + }; + }; + + psci { + status = "disabled"; + }; +}; + +&CPU_SLEEP_0 { + compatible = "qcom,idle-state-spc"; +}; + +&cpu0_acc { + status = "okay"; +}; + +&cpu0_saw { + status = "okay"; +}; + +&cpu1_acc { + status = "okay"; +}; + +&cpu1_saw { + status = "okay"; +}; + +&cpu2_acc { + status = "okay"; +}; + +&cpu2_saw { + status = "okay"; +}; + +&cpu3_acc { + status = "okay"; +}; + +&cpu3_saw { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index e7d2e93..4af0103 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -26,12 +26,12 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 172ea3c..2a0ec97 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -263,7 +263,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -280,7 +280,7 @@ vmmc-supply = <&vsdcc_fixed>; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 78ec496..412d947 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -142,7 +142,7 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -162,7 +162,7 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -182,7 +182,7 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -202,7 +202,7 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -282,7 +282,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -297,7 +297,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -1589,8 +1589,8 @@ #phy-cells = <0>; qcom,dsi-phy-index = <0>; - clocks = <&mmcc MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; }; }; diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi new file mode 100644 index 0000000..dddb515 --- /dev/null +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: BSD-3-Clause +#include +#include + +&spmi_bus { + pm8226_0: pm8226@0 { + compatible = "qcom,pm8226", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + }; + + pm8226_1: pm8226@1 { + compatible = "qcom,pm8226", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 2fd59c4..2caf71e 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -15,10 +15,9 @@ reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <4 0xa0 0 IRQ_TYPE_NONE>, - <4 0xa1 0 IRQ_TYPE_NONE>, - <4 0xa2 0 IRQ_TYPE_NONE>, - <4 0xa3 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8841_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; }; temp-alarm@2400 { diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index c1f2012..da00b8f 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -79,14 +79,9 @@ reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>, - <0 0xa4 0 IRQ_TYPE_NONE>, - <0 0xa5 0 IRQ_TYPE_NONE>, - <0 0xa6 0 IRQ_TYPE_NONE>, - <0 0xa7 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8941_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; }; pm8941_temp: temp-alarm@2400 { diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index e921c5e..7b8a8d9 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -42,14 +42,9 @@ reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>, - <0 0xa4 0 IRQ_TYPE_NONE>, - <0 0xa5 0 IRQ_TYPE_NONE>, - <0 0xa6 0 IRQ_TYPE_NONE>, - <0 0xa7 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pma8084_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; }; pma8084_temp: temp-alarm@2400 { diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index 1e6ce03..44526ad 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -228,7 +228,6 @@ compatible = "qcom,sdx55-qmp-usb3-uni-phy"; reg = <0x00ff6000 0x1c0>; status = "disabled"; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 07d611d..1e84471 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -108,6 +108,8 @@ renesas,no-ether-link; phy-handle = <&phy0>; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-idb824.2814", + "ethernet-phy-ieee802.3-c22"; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index 2562cc9..105f9c7 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -129,6 +129,8 @@ phy-handle = <&phy0>; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; reg = <0>; reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index 99acfe4..1c5acf6 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -192,6 +192,8 @@ renesas,no-ether-link; phy-handle = <&phy0>; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-idb824.2814", + "ethernet-phy-ieee802.3-c22"; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts index 68498ce..9c0d968 100644 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -100,6 +100,8 @@ renesas,no-ether-link; phy-handle = <&phy1>; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c816", + "ethernet-phy-ieee802.3-c22"; reg = <0>; }; }; @@ -109,6 +111,20 @@ clock-frequency = <24000000>; /* 24MHz */ }; +&i2c3 { + status = "okay"; + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + eeprom@50 { + compatible = "renesas,r1ex24128", "atmel,24c128"; + reg = <0x50>; + pagesize = <64>; + }; +}; + /* High resolution System tick timers */ &ostm0 { status = "okay"; @@ -147,6 +163,11 @@ ; /* IRQ5 */ }; + i2c3_pins: i2c3 { + pinmux = , /* RIIC3SCL */ + ; /* RIIC3SDA */ + }; + keyboard_pins: keyboard { pinmux = ; /* IRQ0 */ }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index b088e8e..e81a721 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -199,6 +199,7 @@ reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; + reset-gpios = <&pfc 270 GPIO_ACTIVE_LOW>; vdd33a-supply = <&ape6evm_fixed_3v3>; vddvario-supply = <&ape6evm_fixed_1v8>; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index d960c27..a01f3de 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -170,7 +170,10 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.c0f1", + "ethernet-phy-ieee802.3-c22"; reg = <0>; + reset-gpios = <&pfc 18 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts index 2bcb229..33db593 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts @@ -66,6 +66,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1560", + "ethernet-phy-ieee802.3-c22"; reg = <1>; micrel,led-mode = <1>; }; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index 94bf8a1..a5a79cd 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -175,6 +175,8 @@ status = "okay"; phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <3>; micrel,led-mode = <1>; }; diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts index 4ace117..ff274bf 100644 --- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r8a7743.dtsi" +#include / { model = "SK-RZG1M"; @@ -69,9 +70,12 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 73bd62d..c105932 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -123,6 +123,8 @@ * On some older versions of the platform (before R4.0) the phy address * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. */ + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <3>; micrel,led-mode = <1>; }; diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts index 59d1a9b..0a75e8c 100644 --- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r8a7745.dtsi" +#include / { model = "SK-RZG1E"; @@ -64,9 +65,12 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts index 8ac61b5..b024621 100644 --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -79,6 +79,8 @@ status = "okay"; phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <3>; interrupt-parent = <&gpio5>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 6c7b07c..9b65d24 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -63,7 +63,7 @@ &bsc { ethernet@18300000 { - compatible = "smsc,lan9220", "smsc,lan9115"; + compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18300000 0x1000>; phy-mode = "mii"; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 4658453..5f05f2b 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -52,7 +52,7 @@ }; ethernet@18000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; + compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18000000 0x100>; pinctrl-0 = <ðernet_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index fa6d986..57cd2fa 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -678,6 +678,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index d51f235..c802f9f 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -199,6 +199,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 2a8b6fd..6e691b6 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -637,6 +637,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index c6ef636..38e2ab9 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -302,6 +302,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 479e0fd..c8978f4 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -595,6 +595,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index f330d79..99d554f 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -383,6 +383,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index cafa304..92a7616 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -397,6 +397,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index ffa9bc7..ba2b889 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -416,8 +416,8 @@ compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer"; reg = <0x20044000 0x20>; interrupts = ; - clocks = <&xin24m>, <&cru PCLK_TIMER>; - clock-names = "timer", "pclk"; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; }; pwm0: pwm@20050000 { @@ -575,7 +575,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@2007c000 { + gpio0: gpio@2007c000 { compatible = "rockchip,gpio-bank"; reg = <0x2007c000 0x100>; interrupts = ; @@ -588,7 +588,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@20080000 { + gpio1: gpio@20080000 { compatible = "rockchip,gpio-bank"; reg = <0x20080000 0x100>; interrupts = ; @@ -601,7 +601,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@20084000 { + gpio2: gpio@20084000 { compatible = "rockchip,gpio-bank"; reg = <0x20084000 0x100>; interrupts = ; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 9790bc6..667d57a 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -4,6 +4,7 @@ */ /dts-v1/; +#include #include "rk3066a.dtsi" / { @@ -24,6 +25,20 @@ device_type = "memory"; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <2500000>; + poll-interval = <100>; + + recovery { + label = "recovery"; + linux,code = ; + press-threshold-microvolt = <0>; + }; + }; + gpio-leds { compatible = "gpio-leds"; @@ -46,6 +61,13 @@ }; }; + vcc_2v5: vcc-2v5 { + compatible = "regulator-fixed"; + regulator-name = "vcc_2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vcc_io: vcc-io { compatible = "regulator-fixed"; regulator-name = "vcc_io"; @@ -164,6 +186,11 @@ }; }; +&saradc { + vref-supply = <&vcc_2v5>; + status = "okay"; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index ae40554..c25b969 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -23,16 +23,15 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; - operating-points = < + operating-points = /* kHz uV */ - 1416000 1300000 - 1200000 1175000 - 1008000 1125000 - 816000 1125000 - 600000 1100000 - 504000 1100000 - 312000 1075000 - >; + <1416000 1300000>, + <1200000 1175000>, + <1008000 1125000>, + <816000 1125000>, + <600000 1100000>, + <504000 1100000>, + <312000 1075000>; clock-latency = <40000>; clocks = <&cru ARMCLK>; }; @@ -273,7 +272,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@20034000 { + gpio0: gpio@20034000 { compatible = "rockchip,gpio-bank"; reg = <0x20034000 0x100>; interrupts = ; @@ -286,7 +285,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@2003c000 { + gpio1: gpio@2003c000 { compatible = "rockchip,gpio-bank"; reg = <0x2003c000 0x100>; interrupts = ; @@ -299,7 +298,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@2003e000 { + gpio2: gpio@2003e000 { compatible = "rockchip,gpio-bank"; reg = <0x2003e000 0x100>; interrupts = ; @@ -312,7 +311,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@20080000 { + gpio3: gpio@20080000 { compatible = "rockchip,gpio-bank"; reg = <0x20080000 0x100>; interrupts = ; @@ -325,7 +324,7 @@ #interrupt-cells = <2>; }; - gpio4: gpio4@20084000 { + gpio4: gpio@20084000 { compatible = "rockchip,gpio-bank"; reg = <0x20084000 0x100>; interrupts = ; @@ -338,7 +337,7 @@ #interrupt-cells = <2>; }; - gpio6: gpio6@2000a000 { + gpio6: gpio@2000a000 { compatible = "rockchip,gpio-bank"; reg = <0x2000a000 0x100>; interrupts = ; @@ -682,8 +681,7 @@ compatible = "rockchip,rk3066-grf", "syscon", "simple-mfd"; usbphy: usbphy { - compatible = "rockchip,rk3066a-usb-phy", - "rockchip,rk3288-usb-phy"; + compatible = "rockchip,rk3066a-usb-phy"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 2c60649..a94321e 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -54,7 +54,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -223,7 +223,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@2000a000 { + gpio0: gpio@2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; reg = <0x2000a000 0x100>; interrupts = ; @@ -236,7 +236,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@2003c000 { + gpio1: gpio@2003c000 { compatible = "rockchip,gpio-bank"; reg = <0x2003c000 0x100>; interrupts = ; @@ -249,7 +249,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@2003e000 { + gpio2: gpio@2003e000 { compatible = "rockchip,gpio-bank"; reg = <0x2003e000 0x100>; interrupts = ; @@ -262,7 +262,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@20080000 { + gpio3: gpio@20080000 { compatible = "rockchip,gpio-bank"; reg = <0x20080000 0x100>; interrupts = ; @@ -647,8 +647,7 @@ }; usbphy: usbphy { - compatible = "rockchip,rk3188-usb-phy", - "rockchip,rk3288-usb-phy"; + compatible = "rockchip,rk3188-usb-phy"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3229.dtsi b/arch/arm/boot/dts/rk3229.dtsi index cb7d3fa..c340fb3 100644 --- a/arch/arm/boot/dts/rk3229.dtsi +++ b/arch/arm/boot/dts/rk3229.dtsi @@ -10,7 +10,7 @@ /delete-node/ opp-table0; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 75af99c..8eed9e3 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -68,7 +68,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -477,8 +477,8 @@ compatible = "rockchip,rk3228-timer", "rockchip,rk3288-timer"; reg = <0x110c0000 0x20>; interrupts = ; - clocks = <&xin24m>, <&cru PCLK_TIMER>; - clock-names = "timer", "pclk"; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; }; cru: clock-controller@110e0000 { @@ -946,7 +946,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@11110000 { + gpio0: gpio@11110000 { compatible = "rockchip,gpio-bank"; reg = <0x11110000 0x100>; interrupts = ; @@ -959,7 +959,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@11120000 { + gpio1: gpio@11120000 { compatible = "rockchip,gpio-bank"; reg = <0x11120000 0x100>; interrupts = ; @@ -972,7 +972,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@11130000 { + gpio2: gpio@11130000 { compatible = "rockchip,gpio-bank"; reg = <0x11130000 0x100>; interrupts = ; @@ -985,7 +985,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@11140000 { + gpio3: gpio@11140000 { compatible = "rockchip,gpio-bank"; reg = <0x11140000 0x100>; interrupts = ; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 4dcdcf1..aaaa618 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -100,7 +100,7 @@ }; }; - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -1278,7 +1278,7 @@ status = "disabled"; }; - gpu_opp_table: gpu-opp-table { + gpu_opp_table: opp-table-1 { compatible = "operating-points-v2"; opp-100000000 { @@ -1422,7 +1422,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff750000 { + gpio0: gpio@ff750000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff750000 0x0 0x100>; interrupts = ; @@ -1435,7 +1435,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@ff780000 { + gpio1: gpio@ff780000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff780000 0x0 0x100>; interrupts = ; @@ -1448,7 +1448,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@ff790000 { + gpio2: gpio@ff790000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff790000 0x0 0x100>; interrupts = ; @@ -1461,7 +1461,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@ff7a0000 { + gpio3: gpio@ff7a0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7a0000 0x0 0x100>; interrupts = ; @@ -1474,7 +1474,7 @@ #interrupt-cells = <2>; }; - gpio4: gpio4@ff7b0000 { + gpio4: gpio@ff7b0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7b0000 0x0 0x100>; interrupts = ; @@ -1487,7 +1487,7 @@ #interrupt-cells = <2>; }; - gpio5: gpio5@ff7c0000 { + gpio5: gpio@ff7c0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7c0000 0x0 0x100>; interrupts = ; @@ -1500,7 +1500,7 @@ #interrupt-cells = <2>; }; - gpio6: gpio6@ff7d0000 { + gpio6: gpio@ff7d0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7d0000 0x0 0x100>; interrupts = ; @@ -1513,7 +1513,7 @@ #interrupt-cells = <2>; }; - gpio7: gpio7@ff7e0000 { + gpio7: gpio@ff7e0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7e0000 0x0 0x100>; interrupts = ; @@ -1526,7 +1526,7 @@ #interrupt-cells = <2>; }; - gpio8: gpio8@ff7f0000 { + gpio8: gpio@ff7f0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7f0000 0x0 0x100>; interrupts = ; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 24d5684..4482549 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -40,7 +40,7 @@ }; }; - cpu_opp_table: opp_table { + cpu_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-408000000 { @@ -300,8 +300,8 @@ compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer"; reg = <0x10350000 0x20>; interrupts = ; - clocks = <&xin24m>, <&cru PCLK_TIMER>; - clock-names = "timer", "pclk"; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; }; watchdog: watchdog@10360000 { @@ -557,7 +557,7 @@ status = "disabled"; }; - gmac: eth@30200000 { + gmac: ethernet@30200000 { compatible = "rockchip,rv1108-gmac"; reg = <0x30200000 0x10000>; interrupts = , @@ -600,7 +600,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@20030000 { + gpio0: gpio@20030000 { compatible = "rockchip,gpio-bank"; reg = <0x20030000 0x100>; interrupts = ; @@ -613,7 +613,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@10310000 { + gpio1: gpio@10310000 { compatible = "rockchip,gpio-bank"; reg = <0x10310000 0x100>; interrupts = ; @@ -626,7 +626,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@10320000 { + gpio2: gpio@10320000 { compatible = "rockchip,gpio-bank"; reg = <0x10320000 0x100>; interrupts = ; @@ -639,7 +639,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@10330000 { + gpio3: gpio@10330000 { compatible = "rockchip,gpio-bank"; reg = <0x10330000 0x100>; interrupts = ; diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts index b47d830..7427c84 100644 --- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -8,6 +8,7 @@ / { model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210"; compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210"; + chassis-type = "handset"; chosen { stdout-path = &uart2; diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts index 560f830..eeec2bd 100644 --- a/arch/arm/boot/dts/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -8,6 +8,7 @@ / { model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210"; compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210"; + chassis-type = "handset"; chosen { stdout-path = &uart2; diff --git a/arch/arm/boot/dts/sama5d29.dtsi b/arch/arm/boot/dts/sama5d29.dtsi new file mode 100644 index 0000000..17991c2 --- /dev/null +++ b/arch/arm/boot/dts/sama5d29.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sama5d29.dtsi - Device Tree Include file for SAMA5D29 SoC of the SAMA5D2 + * family. + * + * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries + * + * Author: Hari Prasath + * + */ + +#include "sama5d2.dtsi" + +&macb0 { + compatible = "atmel,sama5d29-gem"; +}; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 6c58c15..7039311 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -152,6 +152,13 @@ reg = <0xe001d060 0x48>; }; + rtc: rtc@e001d0a8 { + compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc"; + reg = <0xe001d0a8 0x30>; + interrupts = ; + clocks = <&clk32k 1>; + }; + ps_wdt: watchdog@e001d180 { compatible = "microchip,sama7g5-wdt"; reg = <0xe001d180 0x24>; @@ -164,6 +171,32 @@ reg = <0xe0020000 0x8>; }; + tcb1: timer@e0800000 { + compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0800000 0x100>; + interrupts = , , ; + clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; + }; + + adc: adc@e1000000 { + compatible = "microchip,sama7g5-adc"; + reg = <0xe1000000 0x200>; + interrupts = ; + clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clock-rates = <100000000>; + clock-names = "adc_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>; + dma-names = "rx"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + status = "disabled"; + }; + sdmmc0: mmc@e1204000 { compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; reg = <0xe1204000 0x4000>; @@ -465,6 +498,16 @@ status = "disabled"; }; + tcb0: timer@e2814000 { + compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe2814000 0x100>; + interrupts = , , ; + clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; + }; + flx8: flexcom@e2818000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe2818000 0x200>; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 5a8d92a..98897f7 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -169,7 +169,7 @@ &bsc { ethernet@10000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; + compatible = "smsc,lan9221", "smsc,lan9115"; reg = <0x10000000 0x100>; phy-mode = "mii"; interrupt-parent = <&irqpin0>; diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts new file mode 100644 index 0000000..2a3364b --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "socfpga_arria10.dtsi" + +/ { + + model = "Enclustra Mercury AA1"; + compatible = "altr,socfpga-arria10", "altr,socfpga"; + + aliases { + ethernet0 = &gmac0; + serial1 = &uart1; + i2c0 = &i2c0; + i2c1 = &i2c1; + }; + + memory@0 { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x80000000>; /* 2GB */ + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&eccmgr { + sdmmca-ecc@ff8c2c00 { + compatible = "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c2c00 0x400>; + altr,ecc-parent = <&mmc>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&gmac0 { + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; /* probe for phy addr */ + + max-frame-size = <3800>; + status = "okay"; + + phy-handle = <&phy3>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy3: ethernet-phy@3 { + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <1860>; /* 960ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + reg = <3>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + isl12022: isl12022@6f { + status = "okay"; + compatible = "isil,isl12022"; + reg = <0x6f>; + }; +}; + +/* Following mappings are taken from arria10 socdk dts */ +&mmc { + status = "okay"; + cap-sd-highspeed; + broken-cd; + bus-width = <4>; +}; + +&osc1 { + clock-frequency = <33330000>; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index c4b49ba..2f746a9 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -82,8 +82,6 @@ reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 68 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 68 0x4>; num-lanes = <1>; phys = <&miphy0 1>; phy-names = "pcie-phy"; @@ -101,8 +99,6 @@ reg = <0xb1800000 0x4000>, <0x90000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 69 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 69 0x4>; num-lanes = <1>; phys = <&miphy1 1>; phy-names = "pcie-phy"; @@ -120,8 +116,6 @@ reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 70 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 70 0x4>; num-lanes = <1>; phys = <&miphy2 1>; phy-names = "pcie-phy"; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 1a8f5e8..827e887 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -47,8 +47,6 @@ reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 68 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 68 0x4>; num-lanes = <1>; phys = <&miphy0 1>; phy-names = "pcie-phy"; diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index 9baf927..2cf1938 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -129,11 +129,6 @@ io-channel-names = "aux1", "aux2"; }; - ab8500_battery: ab8500_battery { - stericsson,battery-type = "LIPO"; - thermistor-on-batctrl; - }; - ab8500_fg { compatible = "stericsson,ab8500-fg"; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, @@ -146,7 +141,7 @@ "LOW_BAT_F", "CC_INT_CALIB", "CCEOC"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; io-channels = <&gpadc 0x08>; io-channel-names = "main_bat_v"; }; @@ -163,7 +158,7 @@ "BTEMP_HIGH", "BTEMP_LOW_MEDIUM", "BTEMP_MEDIUM_HIGH"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; io-channels = <&gpadc 0x02>, <&gpadc 0x01>; io-channel-names = "btemp_ball", @@ -200,7 +195,7 @@ "VBUS_OVV", "CH_WD_EXP", "VBUS_CH_DROP_END"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; vddadc-supply = <&ab8500_ldo_tvout_reg>; io-channels = <&gpadc 0x03>, <&gpadc 0x0a>, @@ -214,7 +209,7 @@ ab8500_chargalg { compatible = "stericsson,ab8500-chargalg"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; }; ab8500_usb: ab8500_usb { diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi index 8d01870..e98335e 100644 --- a/arch/arm/boot/dts/ste-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-ab8505.dtsi @@ -92,11 +92,6 @@ }; }; - ab8500_battery: ab8500_battery { - stericsson,battery-type = "LIPO"; - thermistor-on-batctrl; - }; - ab8500_fg { status = "disabled"; compatible = "stericsson,ab8500-fg"; @@ -110,7 +105,7 @@ "LOW_BAT_F", "CC_INT_CALIB", "CCEOC"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; io-channels = <&gpadc 0x08>; io-channel-names = "main_bat_v"; }; @@ -128,7 +123,7 @@ "BTEMP_HIGH", "BTEMP_LOW_MEDIUM", "BTEMP_MEDIUM_HIGH"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; io-channels = <&gpadc 0x02>, <&gpadc 0x01>; io-channel-names = "btemp_ball", @@ -166,7 +161,7 @@ "VBUS_OVV", "CH_WD_EXP", "VBUS_CH_DROP_END"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; vddadc-supply = <&ab8500_ldo_adc_reg>; io-channels = <&gpadc 0x09>, <&gpadc 0x0b>; @@ -177,7 +172,7 @@ ab8500_chargalg { status = "disabled"; compatible = "stericsson,ab8500-chargalg"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; }; ab8500_usb: ab8500_usb { diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 961f2c7..718752a 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -13,6 +13,12 @@ reg = <0x00000000 0x20000000>; }; + battery: battery { + compatible = "simple-battery"; + battery-type = "lithium-ion-polymer"; + thermistor-on-batctrl; + }; + soc { uart@80120000 { pinctrl-names = "default", "sleep"; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 934fc78..fb719c8 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -17,6 +17,12 @@ reg = <0x00000000 0x20000000>; }; + battery: battery { + compatible = "simple-battery"; + battery-type = "lithium-ion-polymer"; + thermistor-on-batctrl; + }; + en_3v3_reg: en_3v3 { compatible = "regulator-fixed"; regulator-name = "en-3v3-fixed-supply"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts index 952606e..fbd6006 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts @@ -43,6 +43,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb425161lu"; + }; + /* TI TXS0206 level translator for 2.9 V */ sd_level_translator: regulator-gpio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts index fabc390..47bbf5a 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts @@ -20,6 +20,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb585157lu"; + }; + /* TI TXS0206 level translator for 2.9 V */ sd_level_translator: regulator-gpio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index ee6379a..fc4c516 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -25,6 +25,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb-l1m7flu"; + }; + i2c-gpio-0 { compatible = "i2c-gpio"; sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index f14cf31..5ddcbc1 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -20,6 +20,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb535151vu"; + }; + /* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */ ldo_3v3_reg: regulator-gpio-ldo-3v3 { compatible = "regulator-fixed"; @@ -266,6 +270,9 @@ pinctrl-names = "default"; pinctrl-0 = <&panel_default_mode>; spi-3wire; + /* TYPE 3: inverse clock polarity and phase */ + spi-cpha; + spi-cpol; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts index 3b82566..9ec3f85 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts @@ -24,6 +24,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb425161la"; + }; + /* TI TXS0206 level translator for 2.9 V */ sd_level_translator: regulator-gpio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 264f3e9..580ca49 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -20,6 +20,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb485159lu"; + }; + /* TI TXS0206 level translator for 2.9 V */ sd_level_translator: regulator-gpio { compatible = "regulator-fixed"; @@ -222,7 +226,9 @@ }; }; - // eMMC + /* + * eMMC seems to be mostly Samsung KLM4G1YE4C "4YMD1R" + */ mmc@80005000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; @@ -232,6 +238,8 @@ mmc-ddr-1_8v; no-sdio; no-sd; + /* From datasheet page 26 figure 9: 300 ms set-up time for 4GB */ + post-power-on-delay-ms = <300>; vmmc-supply = <&ldo_3v3_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc2_a_1_default>; @@ -292,10 +300,10 @@ }; ab8500_ldo_aux2 { - /* Supplies the Cypress TMA140 touchscreen only with 3.3V */ + /* Supplies the Cypress TMA140 touchscreen only with 3.0V */ regulator-name = "AUX2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; }; ab8500_ldo_aux3 { @@ -314,9 +322,9 @@ ab8500_ldo_aux5 { regulator-name = "AUX5"; + /* Intended for 1V8 for touchscreen but actually left unused */ regulator-min-microvolt = <1050000>; regulator-max-microvolt = <2790000>; - regulator-always-on; }; ab8500_ldo_aux6 { @@ -444,31 +452,21 @@ }; &pinctrl { - /* - * This extends the MC0 default config to include DAT32DIR - * which is used by this machine. If we don't do this the - * SD card does not work. - */ sdi0 { mc0_a_1_default { - default_mux { - function = "mc0"; - /* This machine uses the DAT31 pin */ - groups = "mc0_a_1", "mc0dat31dir_a_1"; - }; - default_cfg5 { - pins = "GPIO21_AB3"; /* DAT31DIR */ - ste,config = <&out_hi>; + default_cfg1 { + /* GPIO18, 19 & 20 unused so pull down */ + ste,config = <&gpio_in_pd>; }; }; }; - /* The unused FBCLK needs to be pulled down on this machine */ + /* This is a reset line for the eMMC */ sdi2 { mc2_a_1_default { default_cfg2 { pins = "GPIO130_C8"; /* FBCLK */ - ste,config = <&in_pd>; + ste,config = <&gpio_in_pd>; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi new file mode 100644 index 0000000..069f95f --- /dev/null +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue + */ +#include + +&pinctrl { + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + , /* SDMMC1_D3 */ + ; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + ; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = ; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi new file mode 100644 index 0000000..86126dc --- /dev/null +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = ; + interrupt-affinity = <&cpu0>; + interrupt-parent = <&intc>; + }; + + clocks { + clk_axi: clk-axi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <266500000>; + }; + + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + clk_hsi: clk-hsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <64000000>; + }; + + clk_lsi: clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_pclk3: clk-pclk3 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104438965>; + }; + + clk_pclk4: clk-pclk4 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <133250000>; + }; + + clk_pll4_p: clk-pll4_p { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + clk_pll4_r: clk-pll4_r { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <99000000>; + }; + }; + + intc: interrupt-controller@a0021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xa0021000 0x1000>, + <0xa0022000 0x2000>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + interrupt-parent = <&intc>; + always-on; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + uart4: serial@40010000 { + compatible = "st,stm32h7-uart"; + reg = <0x40010000 0x400>; + interrupts = ; + clocks = <&clk_hsi>; + status = "disabled"; + }; + + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; + reg = <0x50020000 0x400>; + clocks = <&clk_pclk3>; + }; + + sdmmc1: mmc@58005000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00253180>; + reg = <0x58005000 0x1000>, <0x58006000 0x1000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&clk_pll4_p>; + clock-names = "apb_pclk"; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + + iwdg2: watchdog@5a002000 { + compatible = "st,stm32mp1-iwdg"; + reg = <0x5a002000 0x400>; + clocks = <&clk_pclk4>, <&clk_lsi>; + clock-names = "pclk", "lsi"; + status = "disabled"; + }; + + bsec: efuse@5c005000 { + compatible = "st,stm32mp15-bsec"; + reg = <0x5c005000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + part_number_otp: part_number_otp@4 { + reg = <0x4 0x2>; + }; + ts_cal1: calib@5c { + reg = <0x5c 0x2>; + }; + ts_cal2: calib@5e { + reg = <0x5e 0x2>; + }; + }; + + /* + * Break node order to solve dependency probe issue between + * pinctrl and exti. + */ + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp135-pinctrl"; + ranges = <0 0x50002000 0x8400>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOA"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOB"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOC"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOD"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOE"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOF"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOG"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOH"; + ngpios = <15>; + gpio-ranges = <&pinctrl 0 112 15>; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOI"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 128 8>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi new file mode 100644 index 0000000..0fb1386 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp133.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +#include "stm32mp131.dtsi" + +/ { + soc { + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&clk_hse>, <&clk_pll4_r>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&clk_hse>, <&clk_pll4_r>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp135.dtsi b/arch/arm/boot/dts/stm32mp135.dtsi new file mode 100644 index 0000000..abf2acd --- /dev/null +++ b/arch/arm/boot/dts/stm32mp135.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +#include "stm32mp133.dtsi" + +/ { + soc { + }; +}; diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts new file mode 100644 index 0000000..7e96d9e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp135.dtsi" +#include "stm32mp13xf.dtsi" +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP135F-DK Discovery Board"; + compatible = "st,stm32mp135f-dk", "st,stm32mp135"; + + aliases { + serial0 = &uart4; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + vdd_sd: vdd-sd { + compatible = "regulator-fixed"; + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + broken-cd; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi new file mode 100644 index 0000000..fa6889e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp13xc.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/ { + soc { + cryp: crypto@54002000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54002000 0x400>; + interrupts = ; + clocks = <&clk_axi>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi new file mode 100644 index 0000000..fa6889e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp13xf.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/ { + soc { + cryp: crypto@54002000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54002000 0x400>; + interrupts = ; + clocks = <&clk_axi>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 5b60ecb..2ebafe2 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1179,7 +1179,7 @@ }; }; - sai2a_pins_c: sai2a-4 { + sai2a_pins_c: sai2a-2 { pins { pinmux = , /* SAI2_SCK_A */ , /* SAI2_SD_A */ @@ -1190,7 +1190,7 @@ }; }; - sai2a_sleep_pins_c: sai2a-5 { + sai2a_sleep_pins_c: sai2a-2 { pins { pinmux = , /* SAI2_SCK_A */ , /* SAI2_SD_A */ @@ -1235,14 +1235,14 @@ }; }; - sai2b_pins_c: sai2a-4 { + sai2b_pins_c: sai2b-2 { pins1 { pinmux = ; /* SAI2_SD_B */ bias-disable; }; }; - sai2b_sleep_pins_c: sai2a-sleep-5 { + sai2b_sleep_pins_c: sai2b-sleep-2 { pins { pinmux = ; /* SAI2_SD_B */ }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index bd289bf..f693a7d 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -824,7 +824,7 @@ #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x1c>; + reg = <0x4 0x20>; clocks = <&rcc SAI1_K>; clock-names = "sai_ck"; dmas = <&dmamux1 87 0x400 0x01>; @@ -834,7 +834,7 @@ sai1b: audio-controller@4400a024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI1_K>; clock-names = "sai_ck"; dmas = <&dmamux1 88 0x400 0x01>; @@ -855,7 +855,7 @@ sai2a: audio-controller@4400b004 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x1c>; + reg = <0x4 0x20>; clocks = <&rcc SAI2_K>; clock-names = "sai_ck"; dmas = <&dmamux1 89 0x400 0x01>; @@ -865,7 +865,7 @@ sai2b: audio-controller@4400b024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI2_K>; clock-names = "sai_ck"; dmas = <&dmamux1 90 0x400 0x01>; @@ -886,7 +886,7 @@ sai3a: audio-controller@4400c004 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x04 0x1c>; + reg = <0x04 0x20>; clocks = <&rcc SAI3_K>; clock-names = "sai_ck"; dmas = <&dmamux1 113 0x400 0x01>; @@ -896,7 +896,7 @@ sai3b: audio-controller@4400c024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI3_K>; clock-names = "sai_ck"; dmas = <&dmamux1 114 0x400 0x01>; @@ -1271,7 +1271,7 @@ sai4a: audio-controller@50027004 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x04 0x1c>; + reg = <0x04 0x20>; clocks = <&rcc SAI4_K>; clock-names = "sai_ck"; dmas = <&dmamux1 99 0x400 0x01>; @@ -1281,7 +1281,7 @@ sai4b: audio-controller@50027024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI4_K>; clock-names = "sai_ck"; dmas = <&dmamux1 100 0x400 0x01>; @@ -1452,7 +1452,7 @@ usbh_ohci: usb@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; - clocks = <&rcc USBH>; + clocks = <&rcc USBH>, <&usbphyc>; resets = <&rcc USBH_R>; interrupts = ; status = "disabled"; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts index be1dd5e..554f5d3 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts @@ -22,6 +22,12 @@ }; }; +&dcmi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_b>; + pinctrl-1 = <&dcmi_sleep_pins_b>; +}; + ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 2b0ac60..44ecc47 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -202,7 +202,7 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; - spi-max-frequency = <108000000>; + spi-max-frequency = <50000000>; #address-cells = <1>; #size-cells = <1>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 899bfe0..48beed0 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -249,7 +249,7 @@ stusb1600@28 { compatible = "st,stusb1600"; reg = <0x28>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpioi>; pinctrl-names = "default"; pinctrl-0 = <&stusb1600_pins_a>; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index ad0e25a..83d283c 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -91,12 +91,11 @@ /* * The A10-Lime is known to be unstable when running at 1008 MHz */ - operating-points = < - /* kHz uV */ - 912000 1350000 - 864000 1300000 - 624000 1250000 - >; + operating-points = + /* kHz uV */ + <912000 1350000>, + <864000 1300000>, + <624000 1250000>; }; &de { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 1c5a666..51a6464 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -115,13 +115,12 @@ reg = <0x0>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1250000 - >; + <1008000 1400000>, + <912000 1350000>, + <864000 1300000>, + <624000 1250000>; #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 7075e10..3325ab0 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -102,15 +102,14 @@ &cpu0 { clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1200000 - 576000 1200000 - 432000 1200000 - >; + <1008000 1400000>, + <912000 1350000>, + <864000 1300000>, + <624000 1200000>, + <576000 1200000>, + <432000 1200000>; #cooling-cells = <2>; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index a31f907..715d748 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -105,13 +105,12 @@ reg = <0>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1200000 - 864000 1200000 - 720000 1100000 - 480000 1000000 - >; + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; #cooling-cells = <2>; }; @@ -121,13 +120,12 @@ reg = <1>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1200000 - 864000 1200000 - 720000 1100000 - 480000 1000000 - >; + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; #cooling-cells = <2>; }; @@ -137,13 +135,12 @@ reg = <2>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1200000 - 864000 1200000 - 720000 1100000 - 480000 1000000 - >; + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; #cooling-cells = <2>; }; @@ -153,13 +150,12 @@ reg = <3>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1200000 - 864000 1200000 - 720000 1100000 - 480000 1000000 - >; + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 9d792d7..46ecf9d 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -104,16 +104,15 @@ &cpu0 { cpu-supply = <®_dcdc2>; - operating-points = < + operating-points = /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1350000 - 720000 1250000 - 528000 1150000 - 312000 1100000 - 144000 1050000 - >; + <960000 1400000>, + <912000 1400000>, + <864000 1350000>, + <720000 1250000>, + <528000 1150000>, + <312000 1100000>, + <144000 1050000>; }; &de { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 5a40e02..5574299 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -106,16 +106,15 @@ reg = <0>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1300000 - 720000 1200000 - 528000 1100000 - 312000 1000000 - 144000 1000000 - >; + <960000 1400000>, + <912000 1400000>, + <864000 1300000>, + <720000 1200000>, + <528000 1100000>, + <312000 1000000>, + <144000 1000000>; #cooling-cells = <2>; }; @@ -125,16 +124,15 @@ reg = <1>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1300000 - 720000 1200000 - 528000 1100000 - 312000 1000000 - 144000 1000000 - >; + <960000 1400000>, + <912000 1400000>, + <864000 1300000>, + <720000 1200000>, + <528000 1100000>, + <312000 1000000>, + <144000 1000000>; #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 2beddbb..b3d1bdf 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -46,7 +46,7 @@ #include / { - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -164,7 +164,7 @@ io-channels = <&ths>; }; - mali_opp_table: gpu-opp-table { + mali_opp_table: opp-table-gpu { compatible = "operating-points-v2"; opp-144000000 { diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 7fe2a58..a7d4ca3 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -169,7 +169,7 @@ status = "okay"; touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; interrupt-parent = <&r_pio>; interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */ diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index ac97eac..82fdb04 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -200,7 +200,7 @@ status = "disabled"; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cluster0 { compatible = "operating-points-v2"; opp-shared; @@ -253,7 +253,7 @@ }; }; - cpu1_opp_table: opp_table1 { + cpu1_opp_table: opp-table-cluster1 { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 4e89701..ae4f933 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -44,7 +44,7 @@ #include / { - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -112,7 +112,7 @@ }; }; - gpu_opp_table: gpu-opp-table { + gpu_opp_table: opp-table-gpu { compatible = "operating-points-v2"; opp-120000000 { diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 291f478..1d87fc0 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -736,6 +736,45 @@ status = "disabled"; }; + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S0>; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22400 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S1>; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + }; + + i2s2: i2s@1c22800 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S2>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + }; + ths: thermal-sensor@1c24c00 { compatible = "allwinner,sun8i-r40-ths"; reg = <0x01c24c00 0x100>; diff --git a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi index e0d2a31..6f93f8c 100644 --- a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi +++ b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi @@ -115,7 +115,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { reg = <0>; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 1fe251e..c8ca8cb 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -87,7 +87,7 @@ }; vga-dac { - compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac"; + compatible = "corpro,gm7123", "adi,adv7123"; vdd-supply = <®_dcdc1>; ports { diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi index 204fba3..50d328c 100644 --- a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi @@ -156,7 +156,7 @@ &spi0 { status = "okay"; - spiflash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index fb99b3e..546272e 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -691,7 +691,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; reg = <0x7d000000 0x4000>; interrupts = ; phy_type = "utmi"; @@ -706,6 +706,7 @@ compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x7d000000 0x4000>, <0x7d000000 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA114_CLK_USBD>, <&tegra_car TEGRA114_CLK_PLL_U>, @@ -725,11 +726,12 @@ nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; nvidia,has-utmi-pad-registers; + nvidia,pmc = <&tegra_pmc 0>; status = "disabled"; }; usb@7d008000 { - compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; reg = <0x7d008000 0x4000>; interrupts = ; phy_type = "utmi"; @@ -744,6 +746,7 @@ compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x7d008000 0x4000>, <0x7d000000 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA114_CLK_USB3>, <&tegra_car TEGRA114_CLK_PLL_U>, @@ -762,6 +765,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,pmc = <&tegra_pmc 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 8b38f12..63a6417 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -1079,7 +1079,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; interrupts = ; phy_type = "utmi"; @@ -1094,6 +1094,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d000000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USBD>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1113,11 +1114,12 @@ nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; nvidia,has-utmi-pad-registers; + nvidia,pmc = <&tegra_pmc 0>; status = "disabled"; }; usb@7d004000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; interrupts = ; phy_type = "utmi"; @@ -1132,6 +1134,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d004000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USB2>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1150,11 +1153,12 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,pmc = <&tegra_pmc 1>; status = "disabled"; }; usb@7d008000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d008000 0x0 0x4000>; interrupts = ; phy_type = "utmi"; @@ -1169,6 +1173,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d008000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USB3>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1187,6 +1192,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,pmc = <&tegra_pmc 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index 2280d75..23d3f8d 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -393,6 +393,10 @@ bluetooth { compatible = "brcm,bcm4329-bt"; + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wakeup"; + /* PLLP 216MHz / 16 / 4 */ max-speed = <3375000>; @@ -403,7 +407,6 @@ vddio-supply = <&vdd_1v8_sys>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; }; }; @@ -543,7 +546,7 @@ status = "okay"; magnetometer@c { - compatible = "ak,ak8975"; + compatible = "asahi-kasei,ak8975"; reg = <0x0c>; interrupt-parent = <&gpio>; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index acc816b..5b38b06 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -573,8 +573,6 @@ brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>; default-brightness-level = <10>; - - backlight-boot-off; }; clk32k_in: clock@0 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 6ce4981..9508248 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -744,11 +744,10 @@ }; usb@c5000000 { - compatible = "nvidia,tegra20-ehci", "usb-ehci"; + compatible = "nvidia,tegra20-ehci"; reg = <0xc5000000 0x4000>; interrupts = ; phy_type = "utmi"; - nvidia,has-legacy-mode; clocks = <&tegra_car TEGRA20_CLK_USBD>; resets = <&tegra_car 22>; reset-names = "usb"; @@ -761,6 +760,7 @@ compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5000000 0x4000>, <0xc5000000 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA20_CLK_USBD>, <&tegra_car TEGRA20_CLK_PLL_U>, @@ -779,11 +779,12 @@ nvidia,xcvr-lsfslew = <1>; nvidia,xcvr-lsrslew = <1>; nvidia,has-utmi-pad-registers; + nvidia,pmc = <&tegra_pmc 0>; status = "disabled"; }; usb@c5004000 { - compatible = "nvidia,tegra20-ehci", "usb-ehci"; + compatible = "nvidia,tegra20-ehci"; reg = <0xc5004000 0x4000>; interrupts = ; phy_type = "ulpi"; @@ -797,6 +798,7 @@ phy2: usb-phy@c5004000 { compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5004000 0x4000>; + interrupts = ; phy_type = "ulpi"; clocks = <&tegra_car TEGRA20_CLK_USB2>, <&tegra_car TEGRA20_CLK_PLL_U>, @@ -805,11 +807,12 @@ resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; #phy-cells = <0>; + nvidia,pmc = <&tegra_pmc 1>; status = "disabled"; }; usb@c5008000 { - compatible = "nvidia,tegra20-ehci", "usb-ehci"; + compatible = "nvidia,tegra20-ehci"; reg = <0xc5008000 0x4000>; interrupts = ; phy_type = "utmi"; @@ -824,6 +827,7 @@ compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5008000 0x4000>, <0xc5000000 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA20_CLK_USB3>, <&tegra_car TEGRA20_CLK_PLL_U>, @@ -840,6 +844,7 @@ nvidia,xcvr-setup = <9>; nvidia,xcvr-lsfslew = <2>; nvidia,xcvr-lsrslew = <2>; + nvidia,pmc = <&tegra_pmc 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index 9732cd6..07d4ea1 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -819,6 +819,10 @@ bluetooth { compatible = "brcm,bcm4330-bt"; + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wakeup"; + max-speed = <4000000>; clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; @@ -828,7 +832,6 @@ vddio-supply = <&vdd_1v8>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; }; }; @@ -941,9 +944,29 @@ interrupts = ; summit,enable-charge-control = ; + summit,inok-polarity = ; summit,enable-usb-charging; monitored-battery = <&battery_cell>; + + usb_vbus: usb-vbus { + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-min-microamp = <750000>; + regulator-max-microamp = <750000>; + + /* + * SMB347 INOK input pin is connected to PMIC's + * ACOK output, which is fixed to ACTIVE_LOW as + * long as battery voltage is in a good range. + * + * Active INOK disables SMB347 output, so polarity + * needs to be toggled when we want to get the + * output. + */ + summit,needs-inok-toggle; + }; }; }; @@ -1016,12 +1039,13 @@ usb@7d000000 { compatible = "nvidia,tegra30-udc"; status = "okay"; - dr_mode = "peripheral"; + dr_mode = "otg"; + vbus-supply = <&usb_vbus>; }; usb-phy@7d000000 { status = "okay"; - dr_mode = "peripheral"; + dr_mode = "otg"; nvidia,hssync-start-delay = <0>; nvidia,xcvr-lsfslew = <2>; nvidia,xcvr-lsrslew = <2>; diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts index 90db5ff..4259871 100644 --- a/arch/arm/boot/dts/tegra30-ouya.dts +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -93,6 +93,10 @@ bluetooth { compatible = "brcm,bcm4330-bt"; + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wakeup"; + max-speed = <4000000>; clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; @@ -103,7 +107,6 @@ shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index eaf4951..ae3df73 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -958,7 +958,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra30-ehci"; reg = <0x7d000000 0x4000>; interrupts = ; phy_type = "utmi"; @@ -974,6 +974,7 @@ compatible = "nvidia,tegra30-usb-phy"; reg = <0x7d000000 0x4000>, <0x7d000000 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USBD>, <&tegra_car TEGRA30_CLK_PLL_U>, @@ -994,11 +995,12 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,has-utmi-pad-registers; + nvidia,pmc = <&tegra_pmc 0>; status = "disabled"; }; usb@7d004000 { - compatible = "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra30-ehci"; reg = <0x7d004000 0x4000>; interrupts = ; phy_type = "utmi"; @@ -1013,6 +1015,7 @@ compatible = "nvidia,tegra30-usb-phy"; reg = <0x7d004000 0x4000>, <0x7d000000 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB2>, <&tegra_car TEGRA30_CLK_PLL_U>, @@ -1032,11 +1035,12 @@ nvidia,xcvr-hsslew = <32>; nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; + nvidia,pmc = <&tegra_pmc 2>; status = "disabled"; }; usb@7d008000 { - compatible = "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra30-ehci"; reg = <0x7d008000 0x4000>; interrupts = ; phy_type = "utmi"; @@ -1051,6 +1055,7 @@ compatible = "nvidia,tegra30-usb-phy"; reg = <0x7d008000 0x4000>, <0x7d000000 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB3>, <&tegra_car TEGRA30_CLK_PLL_U>, @@ -1070,6 +1075,7 @@ nvidia,xcvr-hsslew = <32>; nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; + nvidia,pmc = <&tegra_pmc 1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts index c577ff4..7ebb0df 100644 --- a/arch/arm/boot/dts/versatile-ab-ib2.dts +++ b/arch/arm/boot/dts/versatile-ab-ib2.dts @@ -13,9 +13,13 @@ syscon@27000000 { compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd"; reg = <0x27000000 0x4>; + ranges = <0x0 0x27000000 0x4>; + #address-cells = <1>; + #size-cells = <1>; - led@00.4 { + led@0,4 { compatible = "register-bit-led"; + reg = <0x00 0x04>; offset = <0x00>; mask = <0x10>; label = "versatile-ib2:0"; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 151c022..79f7cc2 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -70,61 +70,72 @@ core-module@10000000 { compatible = "arm,core-module-versatile", "syscon", "simple-mfd"; reg = <0x10000000 0x200>; + ranges = <0x0 0x10000000 0x200>; + #address-cells = <1>; + #size-cells = <1>; - led@08.0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "versatile:7"; diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 1772ecc..466acc4 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -21,6 +21,16 @@ config ARCH_MSM8X60 bool "Enable support for MSM8X60" select CLKSRC_QCOM +config ARCH_MSM8916 + bool "Enable support for MSM8916" + select HAVE_ARM_ARCH_TIMER + help + Enable support for the Qualcomm Snapdragon 410 (MSM8916/APQ8016). + + Note that ARM64 is the main supported architecture for MSM8916. + The ARM32 option is intended for a few devices with signed firmware + that does not allow booting ARM64 kernels. + config ARCH_MSM8960 bool "Enable support for MSM8960" select CLKSRC_QCOM diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi index 10e9186..578ef36 100644 --- a/arch/arm64/boot/dts/allwinner/axp803.dtsi +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi @@ -10,7 +10,7 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp803-ac-power-supply", "x-powers,axp813-ac-power-supply"; status = "disabled"; @@ -26,18 +26,18 @@ gpio-controller; #gpio-cells = <2>; - gpio0_ldo: gpio0-ldo { + gpio0_ldo: gpio0-ldo-pin { pins = "GPIO0"; function = "ldo"; }; - gpio1_ldo: gpio1-ldo { + gpio1_ldo: gpio1-ldo-pin { pins = "GPIO1"; function = "ldo"; }; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp803-battery-power-supply", "x-powers,axp813-battery-power-supply"; status = "disabled"; @@ -147,7 +147,7 @@ }; }; - usb_power_supply: usb-power-supply { + usb_power_supply: usb-power { compatible = "x-powers,axp803-usb-power-supply", "x-powers,axp813-usb-power-supply"; status = "disabled"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi index cc321c0..f6d7d7f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -343,19 +343,19 @@ }; thermal-zones { - cpu-thermal-zone { + cpu-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; }; - ddr-thermal-zone { + ddr-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 2>; }; - gpu-thermal-zone { + gpu-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 1>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi index 578c374..e39db51 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi @@ -4,7 +4,7 @@ */ / { - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 097a551..c519d9f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -343,7 +343,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <80000000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts index 7ef96f9..adb0b28 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts @@ -35,6 +35,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + i2c-csi { compatible = "i2c-gpio"; sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */ @@ -77,7 +88,7 @@ sound-name-prefix = "Speaker Amp"; }; - vdd_bl: regulator@0 { + vdd_bl: regulator { compatible = "regulator-fixed"; regulator-name = "bl-3v3"; regulator-min-microvolt = <3300000>; @@ -410,6 +421,21 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &sound { status = "okay"; simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 45e1abd..aef571a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -139,6 +139,8 @@ #size-cells = <0>; port@0 { + reg = <0>; + anx6345_in: endpoint { remote-endpoint = <&tcon0_out_anx6345>; }; @@ -206,7 +208,6 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = ; - wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 6ddb717..5ba3790 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -102,6 +102,22 @@ status = "disabled"; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + }; + + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + }; + + opp-432000000 { + opp-hz = /bits/ 64 <432000000>; + }; + }; + osc24M: osc24M_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -1103,6 +1119,7 @@ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; clock-names = "bus", "core"; resets = <&ccu RST_BUS_GPU>; + operating-points-v2 = <&gpu_opp_table>; }; gic: interrupt-controller@1c81000 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi index b265720..1afad8b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi @@ -2,7 +2,7 @@ // Copyright (C) 2020 Chen-Yu Tsai / { - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts index 55bcdf8..55b3695 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts @@ -142,9 +142,16 @@ status = "okay"; eeprom@51 { - compatible = "microchip,24c02"; + compatible = "microchip,24c02", "atmel,24c02"; reg = <0x51>; pagesize = <16>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + eth_mac1: mac-address@fa { + reg = <0xfa 0x06>; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 578a63d..9988e87 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -217,7 +217,7 @@ }; }; - gpu_thermal { + gpu-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 1>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi index 8c6e853..0baf0f8 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi @@ -3,7 +3,7 @@ // Copyright (C) 2020 Clément Péron / { - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-cpu { compatible = "allwinner,sun50i-h6-operating-points"; nvmem-cells = <&cpu_speed_grade>; opp-shared; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 30d396e..46ed529 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -119,10 +119,10 @@ display_clocks: clock@0 { compatible = "allwinner,sun50i-h6-de3-clk"; reg = <0x0 0x10000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index faa0a79..5148cd9 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,5 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb @@ -38,6 +40,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts new file mode 100644 index 0000000..52ebe37 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts @@ -0,0 +1,362 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Vyacheslav Bocharov + * Copyright (c) 2020 JetHome + * Author: Aleksandr Kazantsev + * Author: Alexey Shevelkin + * Author: Vyacheslav Bocharov + */ + +/dts-v1/; + +#include "meson-axg.dtsi" +#include +#include + +/ { + compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg"; + model = "JetHome JetHub J100"; + aliases { + serial0 = &uart_AO; /* Console */ + serial1 = &uart_AO_B; /* External UART (Wireless Module) */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 1024MB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + linux,cma { + size = <0x0 0x400000>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&scpi_sensors 0>; + trips { + cpu_passive: cpu-passive { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + onewire { + compatible = "w1-gpio"; + gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; + #gpio-cells = <1>; + }; +}; + +&efuse { + sn: sn@32 { + reg = <0x32 0x20>; + }; + + eth_mac: eth_mac@0 { + reg = <0x0 0x6>; + }; + + bt_mac: bt_mac@6 { + reg = <0x6 0x6>; + }; + + wifi_mac: wifi_mac@c { + reg = <0xc 0x6>; + }; + + bid: bid@12 { + reg = <0x12 0x20>; + }; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_x_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ + eth_phy0: ethernet-phy@0 { + /* compatible = "ethernet-phy-id0243.0c54";*/ + max-speed = <100>; + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Internal I2C bus (on CPU module) */ +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_z_pins>; + pinctrl-names = "default"; + + /* RTC */ + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; + +/* Peripheral I2C bus (on motherboard) */ +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_x20_pins>; + pinctrl-names = "default"; +}; + +/* wifi module */ +&sd_emmc_b { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr104; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* emmc storage */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* UART Bluetooth */ +&uart_B { + status = "okay"; + pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; + }; +}; + +/* UART Console */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* UART Wireless module */ +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + phy-supply = <&usb_pwr>; +}; + +&spicc1 { + status = "okay"; + pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; + pinctrl-names = "default"; +}; + +&gpio { + gpio-line-names = + "", "", "", "", "", // 0 - 4 + "", "", "", "", "", // 5 - 9 + "UserButton", "", "", "", "", // 10 - 14 + "", "", "", "", "", // 15 - 19 + "", "", "", "", "", // 20 - 24 + "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 + "Output1", "", "", "", "", // 30 - 34 + "", "ZigBeeBOOT", "", "", "", // 35 - 39 + "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 + "Input2", "Input1", "", "", "", // 45 - 49 + "", "", "", "", "", // 50 - 54 + "", "", "", "", "", // 55 - 59 + "", "", "", "", "", // 60 - 64 + "", "", "", "", "", // 65 - 69 + "", "", "", "", "", // 70 - 74 + "", "", "", "", "", // 75 - 79 + "", "", "", "", "", // 80 - 84 + "", ""; // 85-86 +}; + +&cpu0 { + #cooling-cells = <2>; +}; + +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts new file mode 100644 index 0000000..e3bb6df --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" +#include +#include + +/ { + compatible = "radxa,zero", "amlogic,g12a"; + model = "Radxa Zero"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + cvbs-connector { + status = "disabled"; + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + hdmi_pw: regulator-hdmi_pw { + compatible = "regulator-fixed"; + regulator-name = "HDMI_PW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddcpu: regulator-vddcpu { + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&ao_5v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "RADXA-ZERO"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&hdmi_pw>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "disabled"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 81269cc..d8838dd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -139,7 +139,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&dc_in>; + pwm-supply = <&dc_in>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index a26bfe7..4b5d11e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -139,7 +139,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 579f3d0..b4e8619 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -139,7 +139,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&dc_in>; + pwm-supply = <&dc_in>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi index f42cf4b..16dd409 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi @@ -18,7 +18,7 @@ regulator-min-microvolt = <690000>; regulator-max-microvolt = <1050000>; - vin-supply = <&dc_in>; + pwm-supply = <&dc_in>; pwms = <&pwm_ab 0 1250 0>; pwm-dutycycle-range = <100 0>; @@ -37,7 +37,7 @@ regulator-min-microvolt = <690000>; regulator-max-microvolt = <1050000>; - vin-supply = <&vsys_3v3>; + pwm-supply = <&vsys_3v3>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 344573e..e8a00a2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -99,6 +99,8 @@ regulator-max-microvolt = <5000000>; regulator-always-on; vin-supply = <&main_12v>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; }; vcc_1v8: regulator-vcc_1v8 { @@ -130,7 +132,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_ab 0 1250 0>; pwm-dutycycle-range = <100 0>; @@ -149,7 +151,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi index feb0885..b40d2c1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi @@ -96,7 +96,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_ab 0 1250 0>; pwm-dutycycle-range = <100 0>; @@ -115,7 +115,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts new file mode 100644 index 0000000..6eafb90 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Vyacheslav Bocharov + * Copyright (c) 2020 JetHome + * Author: Aleksandr Kazantsev + * Author: Alexey Shevelkin + * Author: Vyacheslav Bocharov + */ + +/dts-v1/; + +#include "meson-gxl.dtsi" + +/ { + compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl"; + model = "JetHome JetHub J80"; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + linux,cma { + size = <0x0 0x1000000>; + }; + }; + + aliases { + serial0 = &uart_AO; /* Console */ + serial1 = &uart_A; /* Bluetooth */ + serial2 = &uart_AO_B; /* Wireless module 1 */ + serial3 = &uart_C; /* Wireless module 2 */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +&efuse { + bt_mac: bt_mac@6 { + reg = <0x6 0x6>; + }; + + wifi_mac: wifi_mac@C { + reg = <0xc 0x6>; + }; +}; + +&sn { + reg = <0x32 0x20>; +}; + +ð_mac { + reg = <0x0 0x6>; +}; + +&bid { + reg = <0x12 0x20>; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* Console UART */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* S905W only has access to its internal PHY */ +ðmac { + status = "okay"; + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&internal_phy { + status = "okay"; + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_C { + status = "okay"; + pinctrl-0 = <&uart_c_pins>; + pinctrl-names = "default"; +}; + +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&i2c_B { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_b_pins>; + + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index dde7cfe..50137aa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "meson-gxm.dtsi" +#include / { compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm"; @@ -33,6 +34,13 @@ reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */ }; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + leds { compatible = "gpio-leds"; @@ -90,6 +98,59 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "RBOX-PRO"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; }; ðmac { diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts index effaa13..212c6aa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -173,7 +173,7 @@ regulator-min-microvolt = <690000>; regulator-max-microvolt = <1050000>; - vin-supply = <&dc_in>; + pwm-supply = <&dc_in>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index f2c0981..9c0b544 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -24,7 +24,7 @@ regulator-min-microvolt = <690000>; regulator-max-microvolt = <1050000>; - vin-supply = <&vsys_3v3>; + pwm-supply = <&vsys_3v3>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index fd0ad85..5779e70 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -116,7 +116,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; @@ -263,6 +263,10 @@ reg = <0>; max-speed = <1000>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ interrupts = <26 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 2194a77..4274758 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -185,7 +185,7 @@ regulator-min-microvolt = <690000>; regulator-max-microvolt = <1050000>; - vin-supply = <&dc_in>; + pwm-supply = <&dc_in>; pwms = <&pwm_AO_cd 1 1500 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts index e0f6775..33a80f9 100644 --- a/arch/arm64/boot/dts/apple/t8103-j274.dts +++ b/arch/arm64/boot/dts/apple/t8103-j274.dts @@ -17,6 +17,7 @@ aliases { serial0 = &serial0; + ethernet0 = ðernet0; }; chosen { @@ -43,3 +44,25 @@ &serial0 { status = "okay"; }; + +/* + * Force the bus number assignments so that we can declare some of the + * on-board devices and properties that are populated by the bootloader + * (such as MAC addresses). + */ +&port00 { + bus-range = <1 1>; +}; + +&port01 { + bus-range = <2 2>; +}; + +&port02 { + bus-range = <3 3>; + ethernet0: pci@0,0 { + reg = <0x30000 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-mac-address = [00 10 18 00 00 00]; + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi index a1e22a2..fc8b2bb 100644 --- a/arch/arm64/boot/dts/apple/t8103.dtsi +++ b/arch/arm64/boot/dts/apple/t8103.dtsi @@ -9,6 +9,7 @@ #include #include +#include / { compatible = "apple,t8103", "apple,arm-platform"; @@ -131,5 +132,211 @@ interrupt-controller; reg = <0x2 0x3b100000 0x0 0x8000>; }; + + pinctrl_ap: pinctrl@23c100000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3c100000 0x0 0x100000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_ap 0 0 212>; + apple,npins = <212>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = , + , + , + , + , + , + ; + + pcie_pins: pcie-pins { + pinmux = , + , + ; + }; + }; + + pinctrl_aop: pinctrl@24a820000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x4a820000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aop 0 0 42>; + apple,npins = <42>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = , + , + , + , + , + , + ; + }; + + pinctrl_nub: pinctrl@23d1f0000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3d1f0000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_nub 0 0 23>; + apple,npins = <23>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = , + , + , + , + , + , + ; + }; + + pinctrl_smc: pinctrl@23e820000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3e820000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_smc 0 0 16>; + apple,npins = <16>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = , + , + , + , + , + , + ; + }; + + pcie0_dart_0: dart@681008000 { + compatible = "apple,t8103-dart"; + reg = <0x6 0x81008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = ; + }; + + pcie0_dart_1: dart@682008000 { + compatible = "apple,t8103-dart"; + reg = <0x6 0x82008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = ; + }; + + pcie0_dart_2: dart@683008000 { + compatible = "apple,t8103-dart"; + reg = <0x6 0x83008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = ; + }; + + pcie0: pcie@690000000 { + compatible = "apple,t8103-pcie", "apple,pcie"; + device_type = "pci"; + + reg = <0x6 0x90000000 0x0 0x1000000>, + <0x6 0x80000000 0x0 0x100000>, + <0x6 0x81000000 0x0 0x4000>, + <0x6 0x82000000 0x0 0x4000>, + <0x6 0x83000000 0x0 0x4000>; + reg-names = "config", "rc", "port0", "port1", "port2"; + + interrupt-parent = <&aic>; + interrupts = , + , + ; + + msi-controller; + msi-parent = <&pcie0>; + msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>; + + + iommu-map = <0x100 &pcie0_dart_0 1 1>, + <0x200 &pcie0_dart_1 1 1>, + <0x300 &pcie0_dart_2 1 1>; + iommu-map-mask = <0xff00>; + + bus-range = <0 3>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>, + <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>; + + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + + port00: pci@0,0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 152 0>; + max-link-speed = <2>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port00 0 0 0 0>, + <0 0 0 2 &port00 0 0 0 1>, + <0 0 0 3 &port00 0 0 0 2>, + <0 0 0 4 &port00 0 0 0 3>; + }; + + port01: pci@1,0 { + device_type = "pci"; + reg = <0x800 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 153 0>; + max-link-speed = <2>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port01 0 0 0 0>, + <0 0 0 2 &port01 0 0 0 1>, + <0 0 0 3 &port01 0 0 0 2>, + <0 0 0 4 &port01 0 0 0 3>; + }; + + port02: pci@2,0 { + device_type = "pci"; + reg = <0x1000 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 33 0>; + max-link-speed = <1>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port02 0 0 0 0>, + <0 0 0 2 &port02 0 0 0 1>, + <0 0 0 3 &port02 0 0 0 2>, + <0 0 0 4 &port02 0 0 0 3>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index fefd2b5..be42932 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -160,64 +160,75 @@ apbregs@10000 { compatible = "syscon", "simple-mfd"; reg = <0x010000 0x1000>; + ranges = <0x0 0x10000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; - led0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "vexpress:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "vexpress:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "vexpress:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "vexpress:3"; linux,default-trigger = "cpu1"; default-state = "off"; }; - led4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "vexpress:4"; linux,default-trigger = "cpu2"; default-state = "off"; }; - led5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "vexpress:5"; linux,default-trigger = "cpu3"; default-state = "off"; }; - led6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "vexpress:6"; default-state = "off"; }; - led7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "vexpress:7"; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 11eae3e..c688203 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ + bcm2711-rpi-cm4-io.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts new file mode 100644 index 0000000..e36d395 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2711-rpi-cm4-io.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index a5a64d1..984c737 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -292,11 +292,11 @@ reg = <0x640 0x18>; interrupts = ; clocks = <&periph_clk>; - clock-names = "periph"; + clock-names = "refclk"; status = "okay"; }; - nand@1800 { + nand-controller@1800 { #address-cells = <1>; #size-cells = <0>; compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; @@ -326,12 +326,12 @@ #reset-cells = <1>; }; }; + }; - reboot { - compatible = "syscon-reboot"; - regmap = <&timer>; - offset = <0x34>; - mask = <1>; - }; + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x34>; + mask = <1>; }; }; diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index e0a2fac..b41e86d 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -2,4 +2,5 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \ exynos5433-tm2.dtb \ exynos5433-tm2e.dtb \ - exynos7-espresso.dtb + exynos7-espresso.dtb \ + exynosautov9-sadk.dtb diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi index 8997f8f..72ccf18 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -87,7 +87,7 @@ status = "disabled"; }; - bus_g2d_400_opp_table: opp-table2 { + bus_g2d_400_opp_table: opp-table-2 { compatible = "operating-points-v2"; opp-shared; @@ -117,7 +117,7 @@ }; }; - bus_g2d_266_opp_table: opp-table3 { + bus_g2d_266_opp_table: opp-table-3 { compatible = "operating-points-v2"; opp-267000000 { @@ -137,7 +137,7 @@ }; }; - bus_gscl_opp_table: opp-table4 { + bus_gscl_opp_table: opp-table-4 { compatible = "operating-points-v2"; opp-333000000 { @@ -151,7 +151,7 @@ }; }; - bus_hevc_opp_table: opp-table5 { + bus_hevc_opp_table: opp-table-5 { compatible = "operating-points-v2"; opp-shared; @@ -175,7 +175,7 @@ }; }; - bus_noc2_opp_table: opp-table6 { + bus_noc2_opp_table: opp-table-6 { compatible = "operating-points-v2"; opp-400000000 { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index fdd0796..aca0170 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -13,6 +13,7 @@ / { model = "Samsung TM2 board"; compatible = "samsung,tm2", "samsung,exynos5433"; + chassis-type = "handset"; }; &cmu_disp { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 089fc7a..22d2646 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -13,6 +13,7 @@ / { model = "Samsung TM2E board"; compatible = "samsung,tm2e", "samsung,exynos5433"; + chassis-type = "handset"; }; &cmu_disp { diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 6a6f7dd..4422021 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -239,7 +239,7 @@ }; }; - cluster_a53_opp_table: opp-table0 { + cluster_a53_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -285,7 +285,7 @@ }; }; - cluster_a57_opp_table: opp-table1 { + cluster_a57_opp_table: opp-table-1 { compatible = "operating-points-v2"; opp-shared; @@ -1132,7 +1132,7 @@ }; syscon_fsys: syscon@156f0000 { - compatible = "syscon"; + compatible = "samsung,exynos5433-sysreg", "syscon"; reg = <0x156f0000 0x1044>; }; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi new file mode 100644 index 0000000..2407b03 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi @@ -0,0 +1,1189 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's ExynosAutov9 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2021 Samsung Electronics Co., Ltd. + * + * Samsung's ExynosAutov9 SoC pin-mux and pin-config options are listed as + * device tree nodes in this file. + */ + +#include + +&pinctrl_alive { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + dp0_hpd: dp0-hpd-pins { + samsung,pins = "gpa1-0"; + samsung,pin-function = ; + }; + + dp1_hpd: dp1-hpd-pins { + samsung,pins = "gpa1-1"; + samsung,pin-function = ; + }; + + gpq0: gpq0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + speedy0_bus: speedy0-bus-pins { + samsung,pins = "gpq0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + speedy1_bus: speedy1-bus-pins { + samsung,pins = "gpa0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; + +&pinctrl_aud { + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + aud_codec_mclk: aud-codec-mclk-pins { + samsung,pins = "gpb0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_codec_mclk_idle: aud-codec-mclk-idle-pins { + samsung,pins = "gpb0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s0_bus: aud-i2s0-pins { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s0_idle: aud-i2s0-idle-pins { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s1_bus: aud-i2s1-pins { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s1_idle: aud-i2s1-idle-pins { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s2_bus: aud-i2s2-pins { + samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s2_idle: aud-i2s2-idle-pins { + samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s3_bus: aud-i2s3-pins { + samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s3_idle: aud-i2s3-idle-pins { + samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s4_bus: aud-i2s4-pins { + samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s4_idle: aud-i2s4-idle-pins { + samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s5_bus: aud-i2s5-pins { + samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s5_idle: aaud-i2s5-idle-pins { + samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s6_bus: aud-i2s6-pins { + samsung,pins = "gpb3-4", "gpb3-5", "gpb3-6", "gpb3-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s6_idle: aaud-i2s6-idle-pins { + samsung,pins = "gpb3-4", "gpb3-5", "gpb3-6", "gpb3-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; + +&pinctrl_fsys0 { + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcie_clkreq0: pcie-clkreq0-pins { + samsung,pins = "gpf0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + pcie_perst0_out: pcie-perst0-out-pins { + samsung,pins = "gpf0-1"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_perst0_in: pcie-perst0-in-pins { + samsung,pins = "gpf0-1"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_clkreq1: pcie-clkreq1-pins { + samsung,pins = "gpf0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + pcie_perst1_out: pcie-perst1-out-pins { + samsung,pins = "gpf0-3"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_perst1_in: pcie-perst1-in-pins { + samsung,pins = "gpf0-3"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_clkreq2: pcie-clkreq2-pins { + samsung,pins = "gpf0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + pcie_perst2_out: pcie-perst2-out-pins { + samsung,pins = "gpf0-5"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_perst2_in: pcie-perst2-in-pins { + samsung,pins = "gpf0-5"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_clkreq3: pcie-clkreq3-pins { + samsung,pins = "gpf1-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + pcie_perst3_out: pcie-perst3-out-pins { + samsung,pins = "gpf1-1"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_perst3_in: pcie-perst3-in-pins { + samsung,pins = "gpf1-1"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_clkreq4: pcie-clkreq4-pins { + samsung,pins = "gpf1-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + pcie_perst4_out: pcie-perst4-out-pins { + samsung,pins = "gpf1-3"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_perst4_in: pcie-perst4-in-pins { + samsung,pins = "gpf1-1"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_clkreq5: pcie-clkreq5-pins { + samsung,pins = "gpf1-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + pcie_perst5_out: pcie-perst5-out-pins { + samsung,pins = "gpf1-5"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie_perst5_in: pcie-perst5-in-pins { + samsung,pins = "gpf1-5"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; +}; + +&pinctrl_fsys1 { + gpf8: gpf8 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk-pins { + samsung,pins = "gpf8-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; /* 2x drive strength */ + }; + + sd2_cmd: sd2-cmd-pins { + samsung,pins = "gpf8-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; /* 2x drive strength */ + }; + + sd2_bus1: sd2-bus-width1-pins { + samsung,pins = "gpf8-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; /* 2x drive strength */ + }; + + sd2_bus4: sd2-bus-width4-pins { + samsung,pins = "gpf8-3", "gpf8-4", "gpf8-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; /* 2x drive strength */ + }; +}; + +&pinctrl_fsys2 { + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf4: gpf4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf5: gpf5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf6: gpf6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gpf2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gpf2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + ufs_rst_n_1: ufs-rst-n-1-pins { + samsung,pins = "gpf2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + ufs_refclk_out_1: ufs-refclk-out-1-pins { + samsung,pins = "gpf2-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + eth0_mdc_mdio: eth0-mdc-mdio-pins { + samsung,pins = "gpf4-5", "gpf4-6"; + samsung,pin-function = ; + }; + + eth0_rgmii: eth0-rgmii-pins { + samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4", + "gpf3-5", "gpf3-6", "gpf3-7", "gpf4-0", + "gpf4-1", "gpf4-2", "gpf4-3", "gpf4-4"; + samsung,pin-function = ; + }; + + eth0_pps_out: eth0-pps-out-pins { + samsung,pins = "gpf3-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + eth1_mdc_mdio: eth1-mdc-mdio-pins { + samsung,pins = "gpf6-5", "gpf6-6"; + samsung,pin-function = ; + }; + + eth1_rgmii: eth1-rgmii-pins { + samsung,pins = "gpf5-1", "gpf5-2", "gpf5-3", "gpf5-4", + "gpf5-5", "gpf5-6", "gpf5-7", "gpf6-0", + "gpf6-1", "gpf6-2", "gpf6-3", "gpf6-4"; + samsung,pin-function = ; + }; + + eth1_pps_out: eth1-pps-out-pins { + samsung,pins = "gpf5-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; + +&pinctrl_peric0 { + gpp0: gpp0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp1: gpp1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm_tout0: pwm-tout0-pins { + samsung,pins = "gpg0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + pwm_tout1: pwm-tout1-pins { + samsung,pins = "gpg0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + pwm_tout2: pwm-tout2-pins { + samsung,pins = "gpg0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + pwm_tout3: pwm-tout3-pins { + samsung,pins = "gpg0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI00 */ + hsi2c0_bus: hsi2c0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI00_I2C */ + hsi2c1_bus: hsi2c1-bus-pins { + samsung,pins = "gpp0-2", "gpp0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI01 */ + hsi2c2_bus: hsi2c2-bus-pins { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI01_I2C */ + hsi2c3_bus: hsi2c3-bus-pins { + samsung,pins = "gpp0-6", "gpp0-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI02 */ + hsi2c4_bus: hsi2c4-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI02_I2C */ + hsi2c5_bus: hsi2c5-bus-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI03 */ + hsi2c6_bus: hsi2c6-bus-pins { + samsung,pins = "gpp1-4", "gpp1-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI03_I2C */ + hsi2c7_bus: hsi2c7-bus-pins { + samsung,pins = "gpp1-6", "gpp1-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI04 */ + hsi2c8_bus: hsi2c8-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI04_I2C */ + hsi2c9_bus: hsi2c9-bus-pins { + samsung,pins = "gpp2-2", "gpp2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI05 */ + hsi2c10_bus: hsi2c10-bus-pins { + samsung,pins = "gpp2-4", "gpp2-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI05_I2C */ + hsi2c11_bus: hsi2c11-bus-pins { + samsung,pins = "gpp2-6", "gpp2-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* SPI USI_PERIC0_USI00_SPI */ + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi0_cs_func: spi0-cs-func-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI01_SPI */ + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp0-6", "gpp0-5", "gpp0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp0-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi1_cs_func: spi1-cs-func-pins { + samsung,pins = "gpp0-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI02_SPI */ + spi2_bus: spi2-bus-pins { + samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi2_cs: spi2-cs-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi2_cs_func: spi2-cs-func-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI03_SPI */ + spi3_bus: spi3-bus-pins { + samsung,pins = "gpp1-6", "gpp1-5", "gpp1-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi3_cs: spi3-cs-pins { + samsung,pins = "gpp1-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi3_cs_func: spi3-cs-func-pins { + samsung,pins = "gpp1-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI04_SPI */ + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi4_cs_func: spi4-cs-func-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* PERIC0 USI05_SPI */ + spi5_bus: spi5-bus-pins { + samsung,pins = "gpp2-6", "gpp2-5", "gpp2-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi5_cs: spi5-cs-pins { + samsung,pins = "gpp2-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + spi5_cs_func: spi5-cs-func-pins { + samsung,pins = "gpp2-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC0_USI00_UART */ + uart0_bus: uart0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart0_bus_dual: uart0-bus-dual-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC0_USI01_UART */ + uart1_bus: uart1-bus-pins { + samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart1_bus_dual: uart1-bus-dual-pins { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC0_USI02_UART */ + uart2_bus: uart2-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart2_bus_dual: uart2-bus-dual-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC0_USI03_UART */ + uart3_bus: uart3-bus-pins { + samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart3_bus_dual: uart3-bus-dual-pins { + samsung,pins = "gpp1-4", "gpp1-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC0_USI04_UART */ + uart4_bus: uart4-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart4_bus_dual: uart4-bus-dual-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC0_USI05_UART */ + uart5_bus: uart5-bus-pins { + samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart5_bus_dual: uart5-bus-dual-pins { + samsung,pins = "gpp2-4", "gpp2-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; + +&pinctrl_peric1 { + gpp3: gpp3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp4: gpp4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp5: gpp5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* PERIC1 USI06 */ + hsi2c12_bus: hsi2c12-bus-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI06_I2C */ + hsi2c13_bus: hsi2c13-bus-pins { + samsung,pins = "gpp3-2", "gpp3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI07 */ + hsi2c14_bus: hsi2c14-bus-pins { + samsung,pins = "gpp3-4", "gpp3-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI07_I2C */ + hsi2c15_bus: hsi2c15-bus-pins { + samsung,pins = "gpp3-6", "gpp3-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI08 */ + hsi2c16_bus: hsi2c16-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI08_I2C */ + hsi2c17_bus: hsi2c17-bus-pins { + samsung,pins = "gpp4-2", "gpp4-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI09 */ + hsi2c18_bus: hsi2c18-bus-pins { + samsung,pins = "gpp4-4", "gpp4-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI09_I2C */ + hsi2c19_bus: hsi2c19-bus-pins { + samsung,pins = "gpp4-6", "gpp4-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI10 */ + hsi2c20_bus: hsi2c20-bus-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI10_I2C */ + hsi2c21_bus: hsi2c21-bus-pins { + samsung,pins = "gpp5-2", "gpp5-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI11 */ + hsi2c22_bus: hsi2c22-bus-pins { + samsung,pins = "gpp5-4", "gpp5-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI11_I2C */ + hsi2c23_bus: hsi2c23-bus-pins { + samsung,pins = "gpp5-6", "gpp5-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI06_SPI */ + spi6_bus: spi6-bus-pins { + samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi6_cs: spi6-cs-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi6_cs_func: spi6-cs-func-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI07_SPI */ + spi7_bus: spi7-bus-pins { + samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi7_cs: spi7-cs-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi7_cs_func: spi7-cs-func-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI08_SPI */ + spi8_bus: spi8-bus-pins { + samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi8_cs: spi8-cs-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi8_cs_func: spi8-cs-func-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI09_SPI */ + spi9_bus: spi9-bus-pins { + samsung,pins = "gpp4-6", "gpp4-5", "gpp4-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi9_cs: spi9-cs-pins { + samsung,pins = "gpp4-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi9_cs_func: spi9-cs-func-pins { + samsung,pins = "gpp4-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI10_SPI */ + spi10_bus: spi10-pins { + samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi10_cs: spi10-cs-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi10_cs_func: spi10-cs-func-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* PERIC1 USI11_SPI */ + spi11_bus: spi11-pins { + samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi11_cs: spi11-cs-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi11_cs_func: spi11-cs-func-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + /* USI_PERIC1_USI06_UART */ + uart6_bus: uart6-bus-pins { + samsung,pins = "gpp3-3", "gpp3-2", "gpp3-1", "gpp3-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart6_bus_dual: uart6-bus-dual-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC1_USI07_UART */ + uart7_bus: uart7-bus-pins { + samsung,pins = "gpp3-7", "gpp3-6", "gpp3-5", "gpp3-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart7_bus_dual: uart7-bus-dual-pins { + samsung,pins = "gpp3-4", "gpp3-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC1_USI08_UART */ + uart8_bus: uart8-bus-pins { + samsung,pins = "gpp4-3", "gpp4-2", "gpp4-1", "gpp4-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart8_bus_dual: uart8-bus-dual-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC1_USI09_UART */ + uart9_bus: uart9-bus-pins { + samsung,pins = "gpp4-7", "gpp4-6", "gpp4-5", "gpp4-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart9_bus_dual: uart9-bus-dual-pins { + samsung,pins = "gpp4-4", "gpp4-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC1_USI10_UART */ + uart10_bus: uart10-bus-pins { + samsung,pins = "gpp5-3", "gpp5-2", "gpp5-1", "gpp5-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart10_bus_dual: uart10-bus-dual-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_PERIC1_USI11_UART */ + uart11_bus: uart11-bus-pins { + samsung,pins = "gpp5-7", "gpp5-6", "gpp5-5", "gpp5-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart11_bus_dual: uart11-bus-dual-pins { + samsung,pins = "gpp5-4", "gpp5-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts new file mode 100644 index 0000000..ef46d7a --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung ExynosAutov9 SADK board device tree source + * + * Copyright (c) 2021 Samsung Electronics Co., Ltd. + * + */ + +/dts-v1/; +#include "exynosautov9.dtsi" +#include + +/ { + model = "Samsung ExynosAuto v9 SADK board"; + compatible = "samsung,exynosautov9-sadk", "samsung,exynosautov9"; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &serial_0; + }; + + chosen { + stdout-path = &serial_0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x77000000>, + <0x8 0x80000000 0x1 0x7ba00000>, + <0xa 0x00000000 0x2 0x00000000>; + }; + + ufs_0_fixed_vcc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "ufs-vcc"; + gpio = <&gpq0 1 GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; +}; + +&serial_0 { + status = "okay"; +}; + +&ufs_0_phy { + status = "okay"; +}; + +&ufs_0 { + status = "okay"; + vcc-supply = <&ufs_0_fixed_vcc_reg>; + vcc-fixed-regulator; +}; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi new file mode 100644 index 0000000..3e47273 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's ExynosAuto v9 SoC device tree source + * + * Copyright (c) 2021 Samsung Electronics Co., Ltd. + * + */ + +#include + +/ { + compatible = "samsung,exynosautov9"; + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_fsys0; + pinctrl3 = &pinctrl_fsys1; + pinctrl4 = &pinctrl_fsys2; + pinctrl5 = &pinctrl_peric0; + pinctrl6 = &pinctrl_peric1; + }; + + arm-pmu { + compatible = "arm,cortex-a76-pmu"; + interrupts = , + , + , + , + , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x100>; + enable-method = "psci"; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x200>; + enable-method = "psci"; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x300>; + enable-method = "psci"; + }; + + cpu4: cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x10000>; + enable-method = "psci"; + }; + + cpu5: cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x10100>; + enable-method = "psci"; + }; + + cpu6: cpu@10200 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x10200>; + enable-method = "psci"; + }; + + cpu7: cpu@10300 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x10300>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + cpu_suspend = <0xc4000001>; + cpu_off = <0x84000002>; + cpu_on = <0xc4000003>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + fixed-rate-clocks { + xtcxo: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "oscclk"; + }; + + /* + * Keep the stub clock for serial driver, until proper clock + * driver is implemented. + */ + uart_clock: uart-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133250000>; + clock-output-names = "uart"; + }; + + /* + * Keep the stub clock for ufs driver, until proper clock + * driver is implemented. + */ + ufs_core_clock: ufs-core-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <166562500>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + chipid@10000000 { + compatible = "samsung,exynos850-chipid"; + reg = <0x10000000 0x24>; + }; + + gic: interrupt-controller@10101000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x10101000 0x1000>, + <0x10102000 0x2000>, + <0x10104000 0x2000>, + <0x10106000 0x2000>; + interrupts = ; + }; + + pinctrl_alive: pinctrl@10450000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x10450000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + }; + }; + + pinctrl_aud: pinctrl@19c60000{ + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x19c60000 0x1000>; + }; + + pinctrl_fsys0: pinctrl@17740000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x17740000 0x1000>; + interrupts = ; + }; + + pinctrl_fsys1: pinctrl@17060000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x17060000 0x1000>; + interrupts = ; + }; + + pinctrl_fsys2: pinctrl@17c30000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x17c30000 0x1000>; + interrupts = ; + }; + + pinctrl_peric0: pinctrl@10230000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x10230000 0x1000>; + interrupts = ; + }; + + pinctrl_peric1: pinctrl@10830000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x10830000 0x1000>; + interrupts = ; + }; + + pmu_system_controller: system-controller@10460000 { + compatible = "samsung,exynos7-pmu", "syscon"; + reg = <0x10460000 0x10000>; + }; + + syscon_fsys2: syscon@17c20000 { + compatible = "samsung,exynosautov9-sysreg", "syscon"; + reg = <0x17c20000 0x1000>; + }; + + /* USI: UART */ + serial_0: uart@10300000 { + compatible = "samsung,exynos850-uart"; + reg = <0x10300000 0x100>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus_dual>; + clocks = <&uart_clock>, <&uart_clock>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + ufs_0_phy: ufs0-phy@17e04000 { + compatible = "samsung,exynosautov9-ufs-phy"; + reg = <0x17e04000 0xc00>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&xtcxo>; + clock-names = "ref_clk"; + status = "disabled"; + }; + + ufs_0: ufs0@17e00000 { + compatible ="samsung,exynosautov9-ufs"; + + reg = <0x17e00000 0x100>, /* 0: HCI standard */ + <0x17e01100 0x410>, /* 1: Vendor-specific */ + <0x17e80000 0x8000>, /* 2: UNIPRO */ + <0x17dc0000 0x2200>; /* 3: UFS protector */ + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = ; + clocks = <&ufs_core_clock>, + <&ufs_core_clock>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_0_phy>; + phy-names = "ufs-phy"; + samsung,sysreg = <&syscon_fsys2>; + samsung,ufs-shareability-reg-offset = <0x710>; + status = "disabled"; + }; + }; +}; + +#include "exynosautov9-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index db9e36e..a14a617 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -25,6 +25,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb @@ -70,4 +72,6 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb +dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb +dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index 79f155d..e662677 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -15,6 +15,7 @@ compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; aliases { + serial0 = &duart0; mmc0 = &esdhc0; mmc1 = &esdhc1; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts index e8d3127..7cd29ab 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts @@ -8,7 +8,7 @@ * None of the four SerDes lanes are used by the module, instead they are * all led out to the carrier for customer use. * - * Copyright (C) 2020 Michael Walle + * Copyright (C) 2021 Michael Walle * */ @@ -21,43 +21,39 @@ compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a"; }; +&enetc_mdio_pf3 { + /* Delete unused phy node */ + /delete-node/ ethernet-phy@5; + + phy0: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + qca,clk-out-frequency = <125000000>; + qca,clk-out-strength = ; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; + + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh: vddh-regulator { + regulator-name = "VDDH"; + }; + }; +}; + &enetc_port0 { status = "disabled"; - /* - * Delete both the phy-handle to the old phy0 label as well as - * the mdio node with the old phy node with the old phy0 label. - */ + /* Delete the phy-handle to the old phy0 label */ /delete-property/ phy-handle; - /delete-node/ mdio; }; &enetc_port1 { phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; + phy-mode = "rgmii-id"; status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@4 { - reg = <0x4>; - eee-broken-1000t; - eee-broken-100tx; - qca,clk-out-frequency = <125000000>; - qca,clk-out-strength = ; - qca,keep-pll-enabled; - vddio-supply = <&vddio>; - - vddio: vddio-regulator { - regulator-name = "VDDIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddh: vddh-regulator { - regulator-name = "VDDH"; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts index f6a79c8..330e34f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -5,7 +5,7 @@ * This is for the network variant 2 which has two ethernet ports. These * ports are connected to the internal switch. * - * Copyright (C) 2020 Michael Walle + * Copyright (C) 2021 Michael Walle * */ @@ -18,12 +18,6 @@ }; &enetc_mdio_pf3 { - phy0: ethernet-phy@5 { - reg = <0x5>; - eee-broken-1000t; - eee-broken-100tx; - }; - phy1: ethernet-phy@4 { reg = <0x4>; eee-broken-1000t; @@ -34,14 +28,11 @@ &enetc_port0 { status = "disabled"; /* - * In the base device tree the PHY was registered in the mdio - * subnode as it is PHY for this port. On this module this PHY - * is connected to a switch port instead and registered above. - * Therefore, delete the mdio subnode as well as the phy-handle - * property here. + * In the base device tree the PHY at address 5 was assigned for + * this port. On this module this PHY is connected to a switch + * port instead. Therefore, delete the phy-handle property here. */ /delete-property/ phy-handle; - /delete-node/ mdio; }; &enetc_port2 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts index e65d1c4..9b5e92f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts @@ -5,7 +5,7 @@ * This is for the network variant 4 which has two ethernet ports. It * extends the base and provides one more port connected via RGMII. * - * Copyright (C) 2019 Michael Walle + * Copyright (C) 2021 Michael Walle * */ @@ -18,33 +18,30 @@ compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a"; }; -&enetc_port1 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - status = "okay"; +&enetc_mdio_pf3 { + phy1: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + qca,clk-out-frequency = <125000000>; + qca,clk-out-strength = ; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy1: ethernet-phy@4 { - reg = <0x4>; - eee-broken-1000t; - eee-broken-100tx; - qca,clk-out-frequency = <125000000>; - qca,clk-out-strength = ; - qca,keep-pll-enabled; - vddio-supply = <&vddio>; - - vddio: vddio-regulator { - regulator-name = "VDDIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - vddh: vddh-regulator { - regulator-name = "VDDH"; - }; + vddh: vddh-regulator { + regulator-name = "VDDH"; }; }; }; + +&enetc_port1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index a92ecb3..d74e738 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -2,7 +2,7 @@ /* * Device Tree file for the Kontron SMARC-sAL28 board. * - * Copyright (C) 2019 Michael Walle + * Copyright (C) 2021 Michael Walle * */ @@ -80,22 +80,19 @@ status = "okay"; }; +&enetc_mdio_pf3 { + phy0: ethernet-phy@5 { + reg = <0x5>; + eee-broken-1000t; + eee-broken-100tx; + }; +}; + &enetc_port0 { phy-handle = <&phy0>; - phy-connection-type = "sgmii"; + phy-mode = "sgmii"; managed = "in-band-status"; status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@5 { - reg = <0x5>; - eee-broken-1000t; - eee-broken-100tx; - }; - }; }; &esdhc { @@ -309,3 +306,11 @@ &lpuart1 { status = "okay"; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index bfd14b6..6e2a1da 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -320,7 +320,7 @@ &enetc_port1 { phy-handle = <&qds_phy1>; - phy-connection-type = "rgmii-id"; + phy-mode = "rgmii-id"; status = "okay"; }; @@ -335,3 +335,11 @@ &sata { status = "okay"; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index d7b5272..7719f44 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -197,6 +197,10 @@ }; &enetc_mdio_pf3 { + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + /* VSC8514 QSGMII quad PHY */ qsgmii_phy0: ethernet-phy@10 { reg = <0x10>; @@ -217,17 +221,9 @@ &enetc_port0 { phy-handle = <&sgmii_phy0>; - phy-connection-type = "sgmii"; + phy-mode = "sgmii"; managed = "in-band-status"; status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - sgmii_phy0: ethernet-phy@2 { - reg = <0x2>; - }; - }; }; &enetc_port2 { @@ -287,6 +283,11 @@ status = "okay"; }; +&usb0 { + status = "okay"; +}; + &usb1 { dr_mode = "otg"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 06b36cc..fd3f3e8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -80,13 +80,6 @@ clock-output-names = "phy_27m"; }; - dpclk: clock-controller@f1f0000 { - compatible = "fsl,ls1028a-plldig"; - reg = <0x0 0xf1f0000 0x0 0xffff>; - #clock-cells = <0>; - clocks = <&osc_27m>; - }; - firmware { optee: optee { compatible = "linaro,optee-tz"; @@ -592,6 +585,7 @@ snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; usb1: usb@3110000 { @@ -602,6 +596,7 @@ snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; sata: sata@3200000 { @@ -800,6 +795,38 @@ clock-names = "wdog_clk", "apb_pclk"; }; + malidp0: display@f080000 { + compatible = "arm,mali-dp500"; + reg = <0x0 0xf080000 0x0 0x10000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "DE", "SE"; + clocks = <&dpclk>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-value = <0xd000d000>; + + port { + dpi0_out: endpoint { + + }; + }; + }; + + gpu: gpu@f0c0000 { + compatible = "vivante,gc"; + reg = <0x0 0xf0c0000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>; + clock-names = "core", "shader", "bus"; + #cooling-cells = <2>; + }; + sai1: audio-controller@f100000 { #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; @@ -926,6 +953,13 @@ status = "disabled"; }; + dpclk: clock-controller@f1f0000 { + compatible = "fsl,ls1028a-plldig"; + reg = <0x0 0xf1f0000 0x0 0x10000>; + #clock-cells = <0>; + clocks = <&osc_27m>; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -1025,6 +1059,7 @@ fixed-link { speed = <2500>; full-duplex; + pause; }; }; @@ -1083,6 +1118,7 @@ fixed-link { speed = <2500>; full-duplex; + pause; }; }; @@ -1094,6 +1130,7 @@ fixed-link { speed = <1000>; full-duplex; + pause; }; }; }; @@ -1108,6 +1145,7 @@ fixed-link { speed = <1000>; full-duplex; + pause; }; }; @@ -1139,24 +1177,4 @@ }; }; - malidp0: display@f080000 { - compatible = "arm,mali-dp500"; - reg = <0x0 0xf080000 0x0 0x10000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 223 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "DE", "SE"; - clocks = <&dpclk>, - <&clockgen QORIQ_CLK_HWACCEL 2>, - <&clockgen QORIQ_CLK_HWACCEL 2>, - <&clockgen QORIQ_CLK_HWACCEL 2>; - clock-names = "pxlclk", "mclk", "aclk", "pclk"; - arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; - arm,malidp-arqos-value = <0xd000d000>; - - port { - dp0_out: endpoint { - - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index f85e437..f891ef6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -241,18 +241,18 @@ interrupt-controller; reg = <0x14 4>; interrupt-map = - <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + <0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-map-mask = <0xffffffff 0x0>; }; }; @@ -847,7 +847,7 @@ }; cluster1_core0_watchdog: wdt@c000000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -857,7 +857,7 @@ }; cluster1_core1_watchdog: wdt@c010000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -867,7 +867,7 @@ }; cluster1_core2_watchdog: wdt@c020000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc020000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -877,7 +877,7 @@ }; cluster1_core3_watchdog: wdt@c030000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc030000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -887,7 +887,7 @@ }; cluster2_core0_watchdog: wdt@c100000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -897,7 +897,7 @@ }; cluster2_core1_watchdog: wdt@c110000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -907,7 +907,7 @@ }; cluster2_core2_watchdog: wdt@c120000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc120000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -917,7 +917,7 @@ }; cluster2_core3_watchdog: wdt@c130000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc130000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 801ba96..3cb9c21 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -293,18 +293,18 @@ interrupt-controller; reg = <0x14 4>; interrupt-map = - <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + <0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-map-mask = <0xffffffff 0x0>; }; }; @@ -387,7 +387,7 @@ }; cluster1_core0_watchdog: wdt@c000000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -397,7 +397,7 @@ }; cluster1_core1_watchdog: wdt@c010000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -407,7 +407,7 @@ }; cluster2_core0_watchdog: wdt@c100000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -417,7 +417,7 @@ }; cluster2_core1_watchdog: wdt@c110000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -427,7 +427,7 @@ }; cluster3_core0_watchdog: wdt@c200000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc200000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -437,7 +437,7 @@ }; cluster3_core1_watchdog: wdt@c210000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc210000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -447,7 +447,7 @@ }; cluster4_core0_watchdog: wdt@c300000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc300000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -457,7 +457,7 @@ }; cluster4_core1_watchdog: wdt@c310000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc310000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts new file mode 100644 index 0000000..15d273c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A BLUEBOX3 +// +// Copyright 2020-2021 NXP + +/dts-v1/; + +#include "fsl-lx2160a-bluebox3.dts" + +/ { + compatible = "fsl,lx2160a-bluebox3-rev-a", "fsl,lx2160a"; +}; + +/* The RGMII PHYs have a different MDIO address */ +&emdio1 { + /delete-node/ ethernet-phy@5; + + sw1_mii3_phy: ethernet-phy@1 { + /* AR8035 */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x1>; + interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>; + }; + + /delete-node/ ethernet-phy@6; + + sw2_mii3_phy: ethernet-phy@2 { + /* AR8035 */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x2>; + interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts new file mode 100644 index 0000000..b21be03 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts @@ -0,0 +1,658 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A BLUEBOX3 +// +// Copyright 2020-2021 NXP + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "NXP Layerscape LX2160ABLUEBOX3"; + compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + mmc0 = &esdhc0; + mmc1 = &esdhc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "MC34717-3.3VSB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&can0 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&can1 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&crypto { + status = "okay"; +}; + +&dpmac5 { + phy-handle = <&aqr113c_phy1>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac6 { + phy-handle = <&aqr113c_phy2>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac9 { + phy-handle = <&aqr113c_phy3>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac10 { + phy-handle = <&aqr113c_phy4>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac17 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&dpmac18 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&emdio1 { + status = "okay"; + + aqr113c_phy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + /* IRQ_10G_PHY2 */ + interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>; + }; + + aqr113c_phy1: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x8>; + /* IRQ_10G_PHY1 */ + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; + }; + + sw1_mii3_phy: ethernet-phy@5 { + /* AR8035 */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x5>; + interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>; + }; + + sw2_mii3_phy: ethernet-phy@6 { + /* AR8035 */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x6>; + interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&emdio2 { + status = "okay"; + + aqr113c_phy4: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + /* IRQ_10G_PHY4 */ + interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; + }; + + aqr113c_phy3: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x8>; + /* IRQ_10G_PHY3 */ + interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; + + mt35xu512aba1: flash@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temp2: temperature-sensor@48 { + compatible = "nxp,sa56004"; + reg = <0x48>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + + temp1: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + i2c-mux@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + spi_bridge: spi@28 { + compatible = "nxp,sc18is602b"; + reg = <0x28>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9846"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + /* The I2C multiplexer and temperature sensors are on + * the T6 riser card. + */ + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + + q12: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + q11: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + + q13: temperature-sensor@48 { + compatible = "nxp,sa56004"; + reg = <0x48>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + + q14: temperature-sensor@4a { + compatible = "nxp,sa56004"; + reg = <0x4a>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + }; + }; + }; + }; +}; + +&pcs_mdio5 { + status = "okay"; +}; + +&pcs_mdio6 { + status = "okay"; +}; + +&pcs_mdio9 { + status = "okay"; +}; + +&pcs_mdio10 { + status = "okay"; +}; + +&spi_bridge { + sw1: ethernet-switch@0 { + compatible = "nxp,sja1110a"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-cpol; + dsa,member = <0 0>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Microcontroller port */ + port@0 { + reg = <0>; + status = "disabled"; + }; + + /* SW1_P1 */ + port@1 { + reg = <1>; + label = "con_2x20"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@2 { + reg = <2>; + ethernet = <&dpmac17>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@3 { + reg = <3>; + label = "1ge_p1"; + phy-mode = "rgmii-id"; + phy-handle = <&sw1_mii3_phy>; + }; + + sw1p4: port@4 { + reg = <4>; + link = <&sw2p1>; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "trx1"; + phy-mode = "internal"; + phy-handle = <&sw1_port5_base_t1_phy>; + }; + + port@6 { + reg = <6>; + label = "trx2"; + phy-mode = "internal"; + phy-handle = <&sw1_port6_base_t1_phy>; + }; + + port@7 { + reg = <7>; + label = "trx3"; + phy-mode = "internal"; + phy-handle = <&sw1_port7_base_t1_phy>; + }; + + port@8 { + reg = <8>; + label = "trx4"; + phy-mode = "internal"; + phy-handle = <&sw1_port8_base_t1_phy>; + }; + + port@9 { + reg = <9>; + label = "trx5"; + phy-mode = "internal"; + phy-handle = <&sw1_port9_base_t1_phy>; + }; + + port@a { + reg = <10>; + label = "trx6"; + phy-mode = "internal"; + phy-handle = <&sw1_port10_base_t1_phy>; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + compatible = "nxp,sja1110-base-t1-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sw1_port5_base_t1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + sw1_port6_base_t1_phy: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + sw1_port7_base_t1_phy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + + sw1_port8_base_t1_phy: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + sw1_port9_base_t1_phy: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x5>; + }; + + sw1_port10_base_t1_phy: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x6>; + }; + }; + }; + }; + + sw2: ethernet-switch@2 { + compatible = "nxp,sja1110a"; + reg = <2>; + spi-max-frequency = <4000000>; + spi-cpol; + dsa,member = <0 1>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Microcontroller port */ + port@0 { + reg = <0>; + status = "disabled"; + }; + + sw2p1: port@1 { + reg = <1>; + link = <&sw1p4>; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@2 { + reg = <2>; + ethernet = <&dpmac18>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@3 { + reg = <3>; + label = "1ge_p2"; + phy-mode = "rgmii-id"; + phy-handle = <&sw2_mii3_phy>; + }; + + port@4 { + reg = <4>; + label = "to_sw3"; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "trx7"; + phy-mode = "internal"; + phy-handle = <&sw2_port5_base_t1_phy>; + }; + + port@6 { + reg = <6>; + label = "trx8"; + phy-mode = "internal"; + phy-handle = <&sw2_port6_base_t1_phy>; + }; + + port@7 { + reg = <7>; + label = "trx9"; + phy-mode = "internal"; + phy-handle = <&sw2_port7_base_t1_phy>; + }; + + port@8 { + reg = <8>; + label = "trx10"; + phy-mode = "internal"; + phy-handle = <&sw2_port8_base_t1_phy>; + }; + + port@9 { + reg = <9>; + label = "trx11"; + phy-mode = "internal"; + phy-handle = <&sw2_port9_base_t1_phy>; + }; + + port@a { + reg = <10>; + label = "trx12"; + phy-mode = "internal"; + phy-handle = <&sw2_port10_base_t1_phy>; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + compatible = "nxp,sja1110-base-t1-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sw2_port5_base_t1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + sw2_port6_base_t1_phy: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + sw2_port7_base_t1_phy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + + sw2_port8_base_t1_phy: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + sw2_port9_base_t1_phy: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x5>; + }; + + sw2_port10_base_t1_phy: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x6>; + }; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index c4b1a59..dc8661e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -680,18 +680,18 @@ interrupt-controller; reg = <0x14 4>; interrupt-map = - <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + <0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-map-mask = <0xffffffff 0x0>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts index e99e764..d40caf1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -123,8 +123,8 @@ ethphy: ethernet-phy@0 { reg = <0>; - reset-assert-us = <100>; - reset-deassert-us = <100>; + reset-assert-us = <1>; + reset-deassert-us = <15000>; reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; }; }; @@ -191,8 +191,10 @@ }; &usdhc2 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; vmmc-supply = <®_vdd_3v3>; vqmmc-supply = <®_nvcc_sd>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; @@ -321,4 +323,28 @@ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 >; }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index 42bbbb3..22a5ef7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -63,7 +63,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; spi-flash@0 { @@ -86,6 +86,7 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; regulators { reg_vdd_soc: BUCK1 { @@ -228,6 +229,7 @@ pinctrl_pmic: pmicgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index 8e4a0ce..2801227 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -57,7 +57,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index b7c91bd..27afa46 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -76,7 +76,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index d2ffd62..a59e849 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -96,7 +96,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index bafd5c8..21c546c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -255,6 +255,10 @@ }; }; +&disp_blk_ctrl { + status = "disabled"; +}; + &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; @@ -282,6 +286,14 @@ }; }; +&gpu_2d { + status = "disabled"; +}; + +&gpu_3d { + status = "disabled"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -632,6 +644,18 @@ status = "okay"; }; +&pgc_gpu { + status = "disabled"; +}; + +&pgc_gpumix { + status = "disabled"; +}; + +&pgc_mipi { + status = "disabled"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 2f632e8..c2f3f11 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -7,6 +7,8 @@ #include #include #include +#include +#include #include #include "imx8mm-pinfunc.h" @@ -610,6 +612,111 @@ interrupts = ; #reset-cells = <1>; }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx8mm-gpc"; + reg = <0x303a0000 0x10000>; + interrupts = ; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <3>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_hsiomix: power-domain@0 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MM_CLK_USB_BUS>; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; + }; + + pgc_pcie: power-domain@1 { + #power-domain-cells = <0>; + reg = ; + power-domains = <&pgc_hsiomix>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>; + }; + + pgc_otg1: power-domain@2 { + #power-domain-cells = <0>; + reg = ; + power-domains = <&pgc_hsiomix>; + }; + + pgc_otg2: power-domain@3 { + #power-domain-cells = <0>; + reg = ; + power-domains = <&pgc_hsiomix>; + }; + + pgc_gpumix: power-domain@4 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU_AHB>; + assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>, + <&clk IMX8MM_CLK_GPU_AHB>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>, <400000000>; + }; + + pgc_gpu: power-domain@5 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MM_CLK_GPU_AHB>, + <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU2D_ROOT>, + <&clk IMX8MM_CLK_GPU3D_ROOT>; + resets = <&src IMX8MQ_RESET_GPU_RESET>; + power-domains = <&pgc_gpumix>; + }; + + pgc_vpumix: power-domain@6 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>; + assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>; + resets = <&src IMX8MQ_RESET_VPU_RESET>; + }; + + pgc_vpu_g1: power-domain@7 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_vpu_g2: power-domain@8 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_vpu_h1: power-domain@9 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_dispmix: power-domain@10 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>, + <&clk IMX8MM_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <500000000>, <200000000>; + }; + + pgc_mipi: power-domain@11 { + #power-domain-cells = <0>; + reg = ; + }; + }; + }; }; aips2: bus@30400000 { @@ -961,6 +1068,33 @@ #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; + disp_blk_ctrl: blk-ctrl@32e28000 { + compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_dispmix>, <&pgc_mipi>, + <&pgc_mipi>; + power-domain-names = "bus", "csi-bridge", + "lcdif", "mipi-dsi", + "mipi-csi"; + clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_ROOT>, + <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>, + <&clk IMX8MM_CLK_CSI1_CORE>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>; + clock-names = "csi-bridge-axi","csi-bridge-apb", + "csi-bridge-core", "lcdif-axi", + "lcdif-apb", "lcdif-pix", + "dsi-pclk", "dsi-ref", + "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; + usbotg1: usb@32e40000 { compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; reg = <0x32e40000 0x200>; @@ -971,6 +1105,7 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; + power-domains = <&pgc_otg1>; status = "disabled"; }; @@ -990,6 +1125,7 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; phys = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; + power-domains = <&pgc_otg2>; status = "disabled"; }; @@ -1030,6 +1166,50 @@ status = "disabled"; }; + gpu_3d: gpu@38000000 { + compatible = "vivante,gc"; + reg = <0x38000000 0x8000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_GPU_AHB>, + <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU3D_ROOT>, + <&clk IMX8MM_CLK_GPU3D_ROOT>; + clock-names = "reg", "bus", "core", "shader"; + assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>, + <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-rates = <0>, <1000000000>; + power-domains = <&pgc_gpu>; + }; + + gpu_2d: gpu@38008000 { + compatible = "vivante,gc"; + reg = <0x38008000 0x8000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_GPU_AHB>, + <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU2D_ROOT>; + clock-names = "reg", "bus", "core"; + assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>, + <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-rates = <0>, <1000000000>; + power-domains = <&pgc_gpu>; + }; + + vpu_blk_ctrl: blk-ctrl@38330000 { + compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon"; + reg = <0x38330000 0x100>; + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, + <&pgc_vpu_g2>, <&pgc_vpu_h1>; + power-domain-names = "bus", "g1", "g2", "h1"; + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>, + <&clk IMX8MM_CLK_VPU_G2_ROOT>, + <&clk IMX8MM_CLK_VPU_H1_ROOT>; + clock-names = "g1", "g2", "h1"; + #power-domain-cells = <1>; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 9b07b26..04d259d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -785,7 +785,7 @@ interrupts = ; clocks = <&clk IMX8MP_CLK_QSPI_ROOT>, <&clk IMX8MP_CLK_QSPI_ROOT>; - clock-names = "fspi", "fspi_en"; + clock-names = "fspi_en", "fspi"; assigned-clock-rates = <80000000>; assigned-clocks = <&clk IMX8MP_CLK_QSPI>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 460ef0d..60d47c7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -40,12 +40,14 @@ label = "VOL_DOWN"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = ; + debounce-interval = <50>; }; vol-up { label = "VOL_UP"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; linux,code = ; + debounce-interval = <50>; }; }; @@ -138,9 +140,14 @@ reg_wifi_3v3: regulator-wifi-3v3 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr>; regulator-name = "3V3_WIFI"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_vdd_3v3>; }; sound { @@ -193,6 +200,14 @@ }; }; + usdhc2_pwrseq: pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt>, <&pinctrl_wifi_disable>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>, + <&gpio4 29 GPIO_ACTIVE_HIGH>; + }; + bm818_codec: sound-wwan-codec { compatible = "broadmobi,bm818", "option,gtm601"; #sound-dai-cells = <0>; @@ -225,7 +240,7 @@ &ddrc { operating-points-v2 = <&ddrc_opp_table>; - ddrc_opp_table: ddrc-opp-table { + ddrc_opp_table: opp-table { compatible = "operating-points-v2"; opp-25M { @@ -307,6 +322,13 @@ >; }; + pinctrl_bt: btgrp { + fsl,pins = < + /* BT_REG_ON */ + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x83 + >; + }; + pinctrl_charger_in: chargeringrp { fsl,pins = < /* CHRG_INT */ @@ -638,6 +660,20 @@ >; }; + pinctrl_wifi_disable: wifidisablegrp { + fsl,pins = < + /* WIFI_REG_ON */ + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x83 + >; + }; + + pinctrl_wifi_pwr: wifipwrgrp { + fsl,pins = < + /* WIFI3V3_EN */ + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x83 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < /* nWDOG */ @@ -1010,6 +1046,7 @@ vddi-supply = <®_lcd_1v8>; backlight = <&backlight_dsi>; reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; port { panel_in: endpoint { @@ -1055,13 +1092,13 @@ &pwm3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_led_g>; + pinctrl-0 = <&pinctrl_led_r>; status = "okay"; }; &pwm4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_led_r>; + pinctrl-0 = <&pinctrl_led_g>; status = "okay"; }; @@ -1199,7 +1236,10 @@ pinctrl-2 = <&pinctrl_usdhc2_200mhz>; bus-width = <4>; vmmc-supply = <®_wifi_3v3>; + mmc-pwrseq = <&usdhc2_pwrseq>; + post-power-on-delay-ms = <1000>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + max-frequency = <50000000>; disable-wp; cap-sdio-irq; keep-power-in-suspend; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index 2535268..4f2db61 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -202,6 +202,7 @@ pinctrl_usdhc2: usdhc2grp { fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0 MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index a08a568..2222ef7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -555,6 +555,7 @@ <&clk IMX8MQ_CLK_PCIE1_PHY>, <&pcie0_refclk>; clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + vph-supply = <&vgen5_reg>; status = "okay"; }; @@ -567,6 +568,7 @@ <&clk IMX8MQ_CLK_PCIE2_PHY>, <&pcie1_refclk>; clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + vph-supply = <&vgen5_reg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 4066b16..972766b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1467,10 +1467,9 @@ #size-cells = <2>; device_type = "pci"; bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */ - 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */ + <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ num-lanes = <1>; - num-viewport = <4>; interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -1505,10 +1504,9 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */ - 0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */ + <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ num-lanes = <1>; - num-viewport = <4>; interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi new file mode 100644 index 0000000..59ea8a2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * NXP S32G2 SoC family + * + * Copyright (c) 2021 SUSE LLC + * Copyright (c) 2017-2021 NXP + */ + +#include + +/ { + compatible = "nxp,s32g2"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + }; + + cluster0_l2: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2: l2-cache1 { + compatible = "cache"; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + firmware { + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x80000000>; + + uart0: serial@401c8000 { + compatible = "nxp,s32g2-linflexuart", + "fsl,s32v234-linflexuart"; + reg = <0x401c8000 0x3000>; + interrupts = ; + status = "disabled"; + }; + + uart1: serial@401cc000 { + compatible = "nxp,s32g2-linflexuart", + "fsl,s32v234-linflexuart"; + reg = <0x401cc000 0x3000>; + interrupts = ; + status = "disabled"; + }; + + uart2: serial@402bc000 { + compatible = "nxp,s32g2-linflexuart", + "fsl,s32v234-linflexuart"; + reg = <0x402bc000 0x3000>; + interrupts = ; + status = "disabled"; + }; + + gic: interrupt-controller@50800000 { + compatible = "arm,gic-v3"; + reg = <0x50800000 0x10000>, + <0x50880000 0x80000>, + <0x50400000 0x2000>, + <0x50410000 0x2000>, + <0x50420000 0x2000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts new file mode 100644 index 0000000..9118d8d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 SUSE LLC + * Copyright (c) 2019-2021 NXP + */ + +/dts-v1/; + +#include "s32g2.dtsi" + +/ { + model = "NXP S32G2 Evaluation Board (S32G-VNP-EVB)"; + compatible = "nxp,s32g274a-evb", "nxp,s32g2"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 4GiB RAM */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>, + <0x8 0x80000000 0 0x80000000>; + }; +}; + +/* UART (J58) to Micro USB port */ +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts new file mode 100644 index 0000000..e05ee85 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 SUSE LLC + * Copyright (c) 2019-2021 NXP + */ + +/dts-v1/; + +#include "s32g2.dtsi" + +/ { + model = "NXP S32G2 Reference Design Board 2 (S32G-VNP-RDB2)"; + compatible = "nxp,s32g274a-rdb2", "nxp,s32g2"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 4GiB RAM */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>, + <0x8 0x80000000 0 0x80000000>; + }; +}; + +/* UART (J2) to Micro USB port */ +&uart0 { + status = "okay"; +}; + +/* UART (J1) to Micro USB port */ +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 2d5c1a3..8bd6d7e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -210,7 +210,7 @@ }; }; - cluster0_opp: opp_table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -245,7 +245,7 @@ }; }; - cluster1_opp: opp_table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; @@ -1087,7 +1087,7 @@ }; watchdog0: watchdog@e8a06000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xe8a06000 0x0 0x1000>; interrupts = ; clocks = <&crg_ctrl HI3660_OSC32K>, @@ -1096,7 +1096,7 @@ }; watchdog1: watchdog@e8a07000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xe8a07000 0x0 0x1000>; interrupts = ; clocks = <&crg_ctrl HI3660_OSC32K>, diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index d8abf44..7c32f5f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -12,6 +12,7 @@ #include "hi3670.dtsi" #include "hikey970-pinctrl.dtsi" +#include "hikey970-pmic.dtsi" / { model = "HiKey970"; @@ -39,23 +40,6 @@ reg = <0x0 0x0 0x0 0x0>; }; - sd_1v8: regulator-1v8 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - sd_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - wlan_en: wlan-en-1-8v { compatible = "regulator-fixed"; regulator-name = "wlan-en-regulator"; @@ -402,8 +386,8 @@ pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; - vmmc-supply = <&sd_3v3>; - vqmmc-supply = <&sd_1v8>; + vmmc-supply = <&ldo16>; + vqmmc-supply = <&ldo9>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 20698cf..636c881 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -669,7 +669,7 @@ interrupt-parent = <&gic>; interrupts = ; clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>, - <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; + <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; clock-names = "ref_clk", "phy_clk"; freq-table-hz = <0 0 0 0>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index dde9371..ae0a7cf 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -193,7 +193,7 @@ }; }; - cpu_opp_table: cpu_opp_table { + cpu_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -840,7 +840,7 @@ }; watchdog0: watchdog@f8005000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xf8005000 0x0 0x1000>; interrupts = ; clocks = <&ao_ctrl HI6220_WDT0_PCLK>, diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi new file mode 100644 index 0000000..970047f --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board + * + * Copyright (C) 2020, Huawei Tech. Co., Ltd. + */ + +#include + +/ { + spmi: spmi@fff24000 { + compatible = "hisilicon,kirin970-spmi-controller"; + #address-cells = <2>; + #size-cells = <0>; + status = "okay"; + reg = <0x0 0xfff24000 0x0 0x1000>; + hisilicon,spmi-channel = <2>; + + pmic: pmic@0 { + compatible = "hisilicon,hi6421-spmi"; + reg = <0 SPMI_USID>; + + #interrupt-cells = <2>; + interrupt-controller; + gpios = <&gpio28 0 0>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + ldo3: ldo3 { /* HDMI */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + }; + + ldo4: ldo4 { /* 40 PIN */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + }; + + ldo9: ldo9 { /* SDCARD I/O */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo15: ldo15 { /* UFS */ + regulator-name = "ldo15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo16: ldo16 { /* SD */ + regulator-name = "ldo16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldo17: ldo17 { /* USB HUB */ + regulator-name = "ldo17"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + ldo33: ldo33 { /* PEX8606 */ + regulator-name = "ldo33"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + ldo34: ldo34 { /* GPS AUX IN VDD */ + regulator-name = "ldo34"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index c686a8d..1c794cd 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-mochabin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts new file mode 100644 index 0000000..f3b0d57 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree file for Globalscale MOCHAbin + * Copyright (C) 2019 Globalscale technologies, Inc. + * Copyright (C) 2021 Sartura Ltd. + * + */ + +/dts-v1/; + +#include +#include "armada-7040.dtsi" + +/ { + model = "Globalscale MOCHAbin"; + compatible = "globalscale,mochabin", "marvell,armada7040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + ethernet3 = &swport1; + ethernet4 = &swport2; + ethernet5 = &swport3; + ethernet6 = &swport4; + }; + + /* SFP+ 10G */ + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; + }; + + /* SFP 1G */ + sfp_eth2: sfp-eth2 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c0>; + los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* microUSB UART console */ +&uart0 { + status = "okay"; + + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +/* eMMC */ +&ap_sdhci0 { + status = "okay"; + + bus-width = <4>; + non-removable; + /delete-property/ marvell,xenon-phy-slow-mode; + no-1-8-v; +}; + +&cp0_pinctrl { + cp0_uart0_pins: cp0-uart0-pins { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "uart0"; + }; + + cp0_spi0_pins: cp0-spi0-pins { + marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59"; + marvell,function = "spi0"; + }; + + cp0_spi1_pins: cp0-spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp0_i2c0_pins: cp0-i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_i2c1_pins: cp0-i2c1-pins { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "i2c1"; + }; + + pca9554_int_pins: pca9554-int-pins { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + + cp0_rgmii1_pins: cp0-rgmii1-pins { + marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + + is31_sdb_pins: is31-sdb-pins { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; + + cp0_pcie_reset_pins: cp0-pcie-reset-pins { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + cp0_pcie_clkreq_pins: cp0-pcie-clkreq-pins { + marvell,pins = "mpp5"; + marvell,function = "pcie1"; + }; + + cp0_switch_pins: cp0-switch-pins { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "gpio"; + }; + + cp0_phy_pins: cp0-phy-pins { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; +}; + +/* mikroBUS UART */ +&cp0_uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart0_pins>; +}; + +/* mikroBUS SPI */ +&cp0_spi0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; +}; + +/* SPI-NOR */ +&cp0_spi1{ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi1_pins>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x3e0000>; + read-only; + }; + + partition@3e0000 { + label = "hw-info"; + reg = <0x3e0000 0x10000>; + read-only; + }; + + partition@3f0000 { + label = "u-boot-env"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +/* mikroBUS, 1G SFP and GPIO expander */ +&cp0_i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + sfp_gpio: pca9554@39 { + compatible = "nxp,pca9554"; + pinctrl-names = "default"; + pinctrl-0 = <&pca9554_int_pins>; + reg = <0x39>; + + interrupt-parent = <&cp0_gpio1>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + gpio-controller; + #gpio-cells = <2>; + + /* + * IO0_0: SFP+_TX_FAULT + * IO0_1: SFP+_TX_DISABLE + * IO0_2: SFP+_PRSNT + * IO0_3: SFP+_LOSS + * IO0_4: SFP_TX_FAULT + * IO0_5: SFP_TX_DISABLE + * IO0_6: SFP_PRSNT + * IO0_7: SFP_LOSS + */ + }; +}; + +/* IS31FL3199, mini-PCIe and 10G SFP+ */ +&cp0_i2c1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + clock-frequency = <100000>; + + leds@64 { + compatible = "issi,is31fl3199"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&is31_sdb_pins>; + shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>; + reg = <0x64>; + + led1_red: led@1 { + label = "red:led1"; + reg = <1>; + led-max-microamp = <20000>; + }; + + led1_green: led@2 { + label = "green:led1"; + reg = <2>; + }; + + led1_blue: led@3 { + label = "blue:led1"; + reg = <3>; + }; + + led2_red: led@4 { + label = "red:led2"; + reg = <4>; + }; + + led2_green: led@5 { + label = "green:led2"; + reg = <5>; + }; + + led2_blue: led@6 { + label = "blue:led2"; + reg = <6>; + }; + + led3_red: led@7 { + label = "red:led3"; + reg = <7>; + }; + + led3_green: led@8 { + label = "green:led3"; + reg = <8>; + }; + + led3_blue: led@9 { + label = "blue:led3"; + reg = <9>; + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + /* 88E1512 PHY */ + eth2phy: ethernet-phy@1 { + reg = <1>; + sfp = <&sfp_eth2>; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_phy_pins>; + reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>; + }; + + /* 88E6141 Topaz switch */ + switch: switch@3 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_switch_pins>; + reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&cp0_gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + swport1: port@1 { + reg = <1>; + label = "lan0"; + phy-handle = <&swphy1>; + }; + + swport2: port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&swphy2>; + }; + + swport3: port@3 { + reg = <3>; + label = "lan2"; + phy-handle = <&swphy3>; + }; + + swport4: port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&swphy4>; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp0_eth1>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + swphy1: swphy1@17 { + reg = <17>; + }; + + swphy2: swphy2@18 { + reg = <18>; + }; + + swphy3: swphy3@19 { + reg = <19>; + }; + + swphy4: swphy4@20 { + reg = <20>; + }; + }; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* 10G SFP+ */ +&cp0_eth0 { + status = "okay"; + + phy-mode = "10gbase-r"; + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&sfp_eth0>; +}; + +/* Topaz switch uplink */ +&cp0_eth1 { + status = "okay"; + + phy-mode = "2500base-x"; + phys = <&cp0_comphy0 1>; + + fixed-link { + speed = <2500>; + full-duplex; + }; +}; + +/* 1G SFP or 1G RJ45 */ +&cp0_eth2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_rgmii1_pins>; + + phy = <ð2phy>; + phy-mode = "rgmii-id"; +}; + +&cp0_utmi { + status = "okay"; +}; + +/* SMSC USB5434B hub */ +&cp0_usb3_0 { + status = "okay"; + + phys = <&cp0_comphy1 0>, <&cp0_utmi0>; + phy-names = "cp0-usb3h0-comphy", "utmi"; +}; + +/* miniPCI-E USB */ +&cp0_usb3_1 { + status = "okay"; +}; + +&cp0_sata0 { + status = "okay"; + + /* 7 + 12 SATA connector (J24) */ + sata-port@0 { + phys = <&cp0_comphy2 0>; + phy-names = "cp0-sata0-0-phy"; + }; + + /* M.2-2250 B-key (J39) */ + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +/* miniPCI-E (J5) */ +&cp0_pcie2 { + status = "okay"; + + pinctrl-names = "default", "clkreq"; + pinctrl-0 = <&cp0_pcie_reset_pins>; + pinctrl-1 = <&cp0_pcie_clkreq_pins>; + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; + reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index a9cca9c..de16c0d 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -915,64 +915,67 @@ }; }; - pcie: pcie@11700000 { + pcie1: pcie@112ff000 { compatible = "mediatek,mt2712-pcie"; device_type = "pci"; - reg = <0 0x11700000 0 0x1000>, - <0 0x112ff000 0 0x1000>; - reg-names = "port0", "port1"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE0>, + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; - phys = <&u3port0 PHY_TYPE_PCIE>, <&u3port1 PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + status = "disabled"; - pcie0: pcie@0,0 { - device_type = "pci"; - status = "disabled"; - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - device_type = "pci"; - status = "disabled"; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + pcie0: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&pericfg CLK_PERI_PCIE0>; + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi index fa159b2..9514507 100644 --- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi @@ -13,6 +13,7 @@ mt6358codec: mt6358codec { compatible = "mediatek,mt6358-sound"; + mediatek,dmic-mode = <0>; /* two-wires */ }; mt6358regulator: mt6358regulator { diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 2f77dc4..2b9bf8d 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -257,18 +257,16 @@ }; }; -&pcie { +&pcie0 { pinctrl-names = "default"; - pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; + pinctrl-0 = <&pcie0_pins>; status = "okay"; +}; - pcie@0,0 { - status = "okay"; - }; - - pcie@1,0 { - status = "okay"; - }; +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins>; + status = "okay"; }; &pio { diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index f2dc850..596c073 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -234,14 +234,10 @@ }; }; -&pcie { +&pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pcie0_pins>; status = "okay"; - - pcie@0,0 { - status = "okay"; - }; }; &pio { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 890a942..6f8cb3a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -781,75 +781,83 @@ #reset-cells = <1>; }; - pcie: pcie@1a140000 { + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0 0x1a140000 0 0x1000>; + }; + + pcie0: pcie@1a143000 { compatible = "mediatek,mt7622-pcie"; device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, - <0 0x1a143000 0 0x1000>, - <0 0x1a145000 0 0x1000>; - reg-names = "subsys", "port0", "port1"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; + interrupts = ; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P1_MAC_EN>, - <&pciesys CLK_PCIE_P0_AHB_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", - "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", - "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; + <&pciesys CLK_PCIE_P0_PIPE_EN>; + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - status = "disabled"; - - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + pcie1: pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - status = "disabled"; - - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index d9e005a..dee66e5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -996,6 +996,7 @@ assigned-clocks = <&topckgen CLK_TOP_MM_SEL>; assigned-clock-rates = <400000000>; #clock-cells = <1>; + #reset-cells = <1>; mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, <&gce 1 CMDQ_THR_PRIO_HIGHEST>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; @@ -1222,6 +1223,7 @@ <&mmsys CLK_MM_DSI0_DIGITAL>, <&mipi_tx0>; clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>; phys = <&mipi_tx0>; phy-names = "dphy"; status = "disabled"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi new file mode 100644 index 0000000..e4aeea4 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) da7219-max98357a sound card. + * + * Copyright 2019 Google LLC. + */ + +#include "mt8183-kukui-audio-da7219.dtsi" +#include "mt8183-kukui-audio-max98357a.dtsi" + +&sound { + compatible = "mediatek,mt8183_da7219_max98357"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi new file mode 100644 index 0000000..16ce5a3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) da7219-rt1015p sound card. + * + * Copyright 2020 Google LLC. + */ + +#include "mt8183-kukui-audio-da7219.dtsi" +#include "mt8183-kukui-audio-rt1015p.dtsi" + +&sound { + compatible = "mediatek,mt8183_da7219_rt1015p"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi new file mode 100644 index 0000000..2c69e76 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) audio fragment for da7219. + * + * Copyright 2020 Google LLC. + */ + +&i2c5 { + da7219: da7219@1a { + pinctrl-names = "default"; + pinctrl-0 = <&da7219_pins>; + compatible = "dlg,da7219"; + reg = <0x1a>; + interrupt-parent = <&pio>; + interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>; + + dlg,micbias-lvl = <2600>; + dlg,mic-amp-in-sel = "diff"; + VDD-supply = <&pp1800_alw>; + VDDMIC-supply = <&pp3300_alw>; + VDDIO-supply = <&pp1800_alw>; + + status = "okay"; + + da7219_aad { + dlg,adc-1bit-rpt = <1>; + dlg,btn-avg = <4>; + dlg,btn-cfg = <50>; + dlg,mic-det-thr = <500>; + dlg,jack-ins-deb = <20>; + dlg,jack-det-rate = "32ms_64ms"; + dlg,jack-rem-deb = <1>; + + dlg,a-d-btn-thr = <0xa>; + dlg,d-b-btn-thr = <0x16>; + dlg,b-c-btn-thr = <0x21>; + dlg,c-mic-btn-thr = <0x3E>; + }; + }; +}; + +&pio { + da7219_pins: da7219_pins { + pins1 { + pinmux = ; + input-enable; + bias-pull-up; + }; + }; +}; + +&sound { + mediatek,headset-codec = <&da7219>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi new file mode 100644 index 0000000..2b60967 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) audio fragment for max98357a. + * + * Copyright 2020 Google LLC. + */ + +/ { + max98357a: max98357a { + compatible = "maxim,max98357a"; + sdmode-gpios = <&pio 175 0>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi new file mode 100644 index 0000000..658a764 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) audio fragment for rt1015p. + * + * Copyright 2020 Google LLC. + */ + +/ { + rt1015p: rt1015p { + compatible = "realtek,rt1015p"; + sdb-gpios = <&pio 175 0>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi new file mode 100644 index 0000000..260a5f5 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) ts3a227e-max98357a sound card. + * + * Copyright 2020 Google LLC. + */ + +#include "mt8183-kukui-audio-max98357a.dtsi" +#include "mt8183-kukui-audio-ts3a227e.dtsi" + +&sound { + compatible = "mediatek,mt8183_mt6358_ts3a227_max98357"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi new file mode 100644 index 0000000..2f7d1fa --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) mt6358-ts3a227-rt1015p sound card. + * + * Copyright 2021 Google LLC. + */ + +#include "mt8183-kukui-audio-ts3a227e.dtsi" +#include "mt8183-kukui-audio-rt1015p.dtsi" + +&sound { + compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi new file mode 100644 index 0000000..0799c48 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) audio fragment for ts3a227e. + * + * Copyright 2019 Google LLC. + */ + +&i2c5 { + ts3a227e: ts3a227e@3b { + pinctrl-names = "default"; + pinctrl-0 = <&ts3a227e_pins>; + compatible = "ti,ts3a227e"; + reg = <0x3b>; + interrupt-parent = <&pio>; + interrupts = <157 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; +}; + +&pio { + ts3a227e_pins: ts3a227e_pins { + pins1 { + pinmux = ; + input-enable; + bias-pull-up; + }; + }; +}; + +&sound { + mediatek,headset-codec = <&ts3a227e>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts index a8d6f32..1a2ec07 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { model = "Google burnet board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts index 42ba9c0..0eca3ff 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-da7219-max98357a.dtsi" / { model = "Google damu board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi index bbe6c33..577519a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi" &mt6358codec { mediatek,dmic-mode = <1>; /* one-wire */ diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts index 36d2c3b..bc2c57f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi-juniper.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { model = "Google juniper sku16 board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts index b3f46c1..e5bd919 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { model = "Google kappa board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts index 6f1aa69..8fa89db 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi-juniper.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { model = "Google kenzo sku17 board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts index 281265f..89208b8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi-willow.dtsi" +#include "mt8183-kukui-audio-da7219-max98357a.dtsi" / { model = "Google willow board sku0"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts index 22e56bd..c7b2044 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi-willow.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { model = "Google willow board sku1"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts index 20eb0dc..89a139a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-kakadu.dtsi" +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi" / { model = "MediaTek kakadu board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi index 3aa7940..06f8c80 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { ppvarn_lcd: ppvarn-lcd { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi index 30c183c..a7b0cb3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi @@ -4,6 +4,7 @@ */ #include "mt8183-kukui.dtsi" +#include "mt8183-kukui-audio-max98357a.dtsi" / { ppvarn_lcd: ppvarn-lcd { @@ -345,3 +346,7 @@ &qca_wifi { qcom,ath10k-calibration-variant = "LE_Krane"; }; + +&sound { + compatible = "mediatek,mt8183_mt6358_ts3a227_max98357"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 8e9cf36..b42d81d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -115,12 +115,18 @@ }; }; - max98357a: codec0 { - compatible = "maxim,max98357a"; - sdmode-gpios = <&pio 175 0>; + sound: mt8183-sound { + mediatek,platform = <&afe>; + pinctrl-names = "default", + "aud_tdm_out_on", + "aud_tdm_out_off"; + pinctrl-0 = <&aud_pins_default>; + pinctrl-1 = <&aud_pins_tdm_out_on>; + pinctrl-2 = <&aud_pins_tdm_out_off>; + status = "okay"; }; - btsco: codec1 { + btsco: bt-sco { compatible = "linux,bt-sco"; }; @@ -215,6 +221,11 @@ }; }; +&afe { + i2s3-share = "I2S2"; + i2s0-share = "I2S5"; +}; + &auxadc { status = "okay"; }; @@ -402,6 +413,54 @@ }; &pio { + aud_pins_default: audiopins { + pins_bus { + pinmux = , + , + , + , + , /*i2s to da7219/max98357*/ + , + , + , + , /*i2s to wifi/bt*/ + , + , + , + , + , + , + , + ; /*mtkaif3.0*/ + }; + }; + + aud_pins_tdm_out_on: audiotdmouton { + pins_bus { + pinmux = , + , + , + , + , + ; /*8ch-i2s to it6505*/ + drive-strength = ; + }; + }; + + aud_pins_tdm_out_off: audiotdmoutoff { + pins_bus { + pinmux = , + , + , + , + , + ; + input-enable; + bias-pull-down; + drive-strength = ; + }; + }; + bt_pins: bt-pins { pins_bt_en { pinmux = ; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 409cf82..ba4584f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -11,7 +11,7 @@ #include #include #include -#include +#include #include #include #include @@ -1115,10 +1115,102 @@ }; }; - audiosys: syscon@11220000 { + audiosys: audio-controller@11220000 { compatible = "mediatek,mt8183-audiosys", "syscon"; reg = <0 0x11220000 0 0x1000>; #clock-cells = <1>; + afe: mt8183-afe-pcm { + compatible = "mediatek,mt8183-audio"; + interrupts = ; + resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>; + reset-names = "audiosys"; + power-domains = + <&spm MT8183_POWER_DOMAIN_AUDIO>; + clocks = <&audiosys CLK_AUDIO_AFE>, + <&audiosys CLK_AUDIO_DAC>, + <&audiosys CLK_AUDIO_DAC_PREDIS>, + <&audiosys CLK_AUDIO_ADC>, + <&audiosys CLK_AUDIO_PDN_ADDA6_ADC>, + <&audiosys CLK_AUDIO_22M>, + <&audiosys CLK_AUDIO_24M>, + <&audiosys CLK_AUDIO_APLL_TUNER>, + <&audiosys CLK_AUDIO_APLL2_TUNER>, + <&audiosys CLK_AUDIO_I2S1>, + <&audiosys CLK_AUDIO_I2S2>, + <&audiosys CLK_AUDIO_I2S3>, + <&audiosys CLK_AUDIO_I2S4>, + <&audiosys CLK_AUDIO_TDM>, + <&audiosys CLK_AUDIO_TML>, + <&infracfg CLK_INFRA_AUDIO>, + <&infracfg CLK_INFRA_AUDIO_26M_BCLK>, + <&topckgen CLK_TOP_MUX_AUDIO>, + <&topckgen CLK_TOP_MUX_AUD_INTBUS>, + <&topckgen CLK_TOP_SYSPLL_D2_D4>, + <&topckgen CLK_TOP_MUX_AUD_1>, + <&topckgen CLK_TOP_APLL1_CK>, + <&topckgen CLK_TOP_MUX_AUD_2>, + <&topckgen CLK_TOP_APLL2_CK>, + <&topckgen CLK_TOP_MUX_AUD_ENG1>, + <&topckgen CLK_TOP_APLL1_D8>, + <&topckgen CLK_TOP_MUX_AUD_ENG2>, + <&topckgen CLK_TOP_APLL2_D8>, + <&topckgen CLK_TOP_MUX_APLL_I2S0>, + <&topckgen CLK_TOP_MUX_APLL_I2S1>, + <&topckgen CLK_TOP_MUX_APLL_I2S2>, + <&topckgen CLK_TOP_MUX_APLL_I2S3>, + <&topckgen CLK_TOP_MUX_APLL_I2S4>, + <&topckgen CLK_TOP_MUX_APLL_I2S5>, + <&topckgen CLK_TOP_APLL12_DIV0>, + <&topckgen CLK_TOP_APLL12_DIV1>, + <&topckgen CLK_TOP_APLL12_DIV2>, + <&topckgen CLK_TOP_APLL12_DIV3>, + <&topckgen CLK_TOP_APLL12_DIV4>, + <&topckgen CLK_TOP_APLL12_DIVB>, + /*<&topckgen CLK_TOP_APLL12_DIV5>,*/ + <&clk26m>; + clock-names = "aud_afe_clk", + "aud_dac_clk", + "aud_dac_predis_clk", + "aud_adc_clk", + "aud_adc_adda6_clk", + "aud_apll22m_clk", + "aud_apll24m_clk", + "aud_apll1_tuner_clk", + "aud_apll2_tuner_clk", + "aud_i2s1_bclk_sw", + "aud_i2s2_bclk_sw", + "aud_i2s3_bclk_sw", + "aud_i2s4_bclk_sw", + "aud_tdm_clk", + "aud_tml_clk", + "aud_infra_clk", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_aud_intbus", + "top_syspll_d2_d4", + "top_mux_aud_1", + "top_apll1_ck", + "top_mux_aud_2", + "top_apll2_ck", + "top_mux_aud_eng1", + "top_apll1_d8", + "top_mux_aud_eng2", + "top_apll2_d8", + "top_i2s0_m_sel", + "top_i2s1_m_sel", + "top_i2s2_m_sel", + "top_i2s3_m_sel", + "top_i2s4_m_sel", + "top_i2s5_m_sel", + "top_apll12_div0", + "top_apll12_div1", + "top_apll12_div2", + "top_apll12_div3", + "top_apll12_div4", + "top_apll12_divb", + /*"top_apll12_div5",*/ + "top_clk26m_clk"; + }; }; mmc0: mmc@11230000 { @@ -1227,6 +1319,7 @@ compatible = "mediatek,mt8183-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, <&gce 1 CMDQ_THR_PRIO_HIGHEST>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; @@ -1341,11 +1434,11 @@ reg = <0 0x14014000 0 0x1000>; interrupts = ; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; - mediatek,syscon-dsi = <&mmsys 0x140>; clocks = <&mmsys CLK_MM_DSI0_MM>, <&mmsys CLK_MM_DSI0_IF>, <&mipi_tx0>; clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>; phys = <&mipi_tx0>; phy-names = "dphy"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 9757138..c7c7d4e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -5,6 +5,7 @@ */ /dts-v1/; +#include #include #include #include @@ -257,6 +258,24 @@ }; }; + topckgen: syscon@10000000 { + compatible = "mediatek,mt8192-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt8192-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8192-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + pio: pinctrl@10005000 { compatible = "mediatek,mt8192-pinctrl"; reg = <0 0x10005000 0 0x1000>, @@ -282,6 +301,12 @@ #interrupt-cells = <2>; }; + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8192-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + systimer: timer@10017000 { compatible = "mediatek,mt8192-timer", "mediatek,mt6765-timer"; @@ -291,6 +316,12 @@ clock-names = "clk13m"; }; + scp_adsp: clock-controller@10720000 { + compatible = "mediatek,mt8192-scp_adsp"; + reg = <0 0x10720000 0 0x1000>; + #clock-cells = <1>; + }; + uart0: serial@11002000 { compatible = "mediatek,mt8192-uart", "mediatek,mt6577-uart"; @@ -311,6 +342,12 @@ status = "disabled"; }; + imp_iic_wrap_c: clock-controller@11007000 { + compatible = "mediatek,mt8192-imp_iic_wrap_c"; + reg = <0 0x11007000 0 0x1000>; + #clock-cells = <1>; + }; + spi0: spi@1100a000 { compatible = "mediatek,mt8192-spi", "mediatek,mt6765-spi"; @@ -436,6 +473,12 @@ status = "disable"; }; + audsys: clock-controller@11210000 { + compatible = "mediatek,mt8192-audsys", "syscon"; + reg = <0 0x11210000 0 0x1000>; + #clock-cells = <1>; + }; + i2c3: i2c3@11cb0000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11cb0000 0 0x1000>, @@ -449,6 +492,12 @@ status = "disabled"; }; + imp_iic_wrap_e: clock-controller@11cb1000 { + compatible = "mediatek,mt8192-imp_iic_wrap_e"; + reg = <0 0x11cb1000 0 0x1000>; + #clock-cells = <1>; + }; + i2c7: i2c7@11d00000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11d00000 0 0x1000>, @@ -488,6 +537,12 @@ status = "disabled"; }; + imp_iic_wrap_s: clock-controller@11d03000 { + compatible = "mediatek,mt8192-imp_iic_wrap_s"; + reg = <0 0x11d03000 0 0x1000>; + #clock-cells = <1>; + }; + i2c1: i2c1@11d20000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11d20000 0 0x1000>, @@ -527,6 +582,12 @@ status = "disabled"; }; + imp_iic_wrap_ws: clock-controller@11d23000 { + compatible = "mediatek,mt8192-imp_iic_wrap_ws"; + reg = <0 0x11d23000 0 0x1000>; + #clock-cells = <1>; + }; + i2c5: i2c5@11e00000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11e00000 0 0x1000>, @@ -540,6 +601,12 @@ status = "disabled"; }; + imp_iic_wrap_w: clock-controller@11e01000 { + compatible = "mediatek,mt8192-imp_iic_wrap_w"; + reg = <0 0x11e01000 0 0x1000>; + #clock-cells = <1>; + }; + i2c0: i2c0@11f00000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11f00000 0 0x1000>, @@ -565,5 +632,101 @@ #size-cells = <0>; status = "disabled"; }; + + imp_iic_wrap_n: clock-controller@11f02000 { + compatible = "mediatek,mt8192-imp_iic_wrap_n"; + reg = <0 0x11f02000 0 0x1000>; + #clock-cells = <1>; + }; + + msdc_top: clock-controller@11f10000 { + compatible = "mediatek,mt8192-msdc_top"; + reg = <0 0x11f10000 0 0x1000>; + #clock-cells = <1>; + }; + + msdc: clock-controller@11f60000 { + compatible = "mediatek,mt8192-msdc"; + reg = <0 0x11f60000 0 0x1000>; + #clock-cells = <1>; + }; + + mfgcfg: clock-controller@13fbf000 { + compatible = "mediatek,mt8192-mfgcfg"; + reg = <0 0x13fbf000 0 0x1000>; + #clock-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt8192-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: clock-controller@15020000 { + compatible = "mediatek,mt8192-imgsys"; + reg = <0 0x15020000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys2: clock-controller@15820000 { + compatible = "mediatek,mt8192-imgsys2"; + reg = <0 0x15820000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys_soc: clock-controller@1600f000 { + compatible = "mediatek,mt8192-vdecsys_soc"; + reg = <0 0x1600f000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@1602f000 { + compatible = "mediatek,mt8192-vdecsys"; + reg = <0 0x1602f000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@17000000 { + compatible = "mediatek,mt8192-vencsys"; + reg = <0 0x17000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: clock-controller@1a000000 { + compatible = "mediatek,mt8192-camsys"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawa: clock-controller@1a04f000 { + compatible = "mediatek,mt8192-camsys_rawa"; + reg = <0 0x1a04f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawb: clock-controller@1a06f000 { + compatible = "mediatek,mt8192-camsys_rawb"; + reg = <0 0x1a06f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawc: clock-controller@1a08f000 { + compatible = "mediatek,mt8192-camsys_rawc"; + reg = <0 0x1a08f000 0 0x1000>; + #clock-cells = <1>; + }; + + ipesys: clock-controller@1b000000 { + compatible = "mediatek,mt8192-ipesys"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + + mdpsys: clock-controller@1f000000 { + compatible = "mediatek,mt8192-mdpsys"; + reg = <0 0x1f000000 0 0x1000>; + #clock-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 6e5f846..8a51751 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -1021,8 +1021,6 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; - - backlight-boot-off; }; clk32k_in: clock@0 { diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index b0bcda8..63aa312 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -1107,7 +1107,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; interrupts = ; phy_type = "utmi"; @@ -1123,6 +1123,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d000000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USBD>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1142,11 +1143,12 @@ nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; nvidia,has-utmi-pad-registers; + nvidia,pmc = <&tegra_pmc 0>; status = "disabled"; }; usb@7d004000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; interrupts = ; phy_type = "utmi"; @@ -1162,6 +1164,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d004000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USB2>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1180,11 +1183,12 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,pmc = <&tegra_pmc 1>; status = "disabled"; }; usb@7d008000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d008000 0x0 0x4000>; interrupts = ; phy_type = "utmi"; @@ -1200,6 +1204,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d008000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = ; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USB3>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1218,6 +1223,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,pmc = <&tegra_pmc 2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 74c1a5d..52fa258 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -275,178 +275,1097 @@ remote-endpoint = <&dspk2_cif_ep>; }; }; + + xbar_sfc1_in_port: port@20 { + reg = <0x20>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@21 { + reg = <0x21>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@22 { + reg = <0x22>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@23 { + reg = <0x23>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@24 { + reg = <0x24>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@25 { + reg = <0x25>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@26 { + reg = <0x26>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@28 { + reg = <0x28>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@2a { + reg = <0x2a>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@2c { + reg = <0x2c>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@2d { + reg = <0x2d>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@2e { + reg = <0x2e>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@2f { + reg = <0x2f>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@31 { + reg = <0x31>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@32 { + reg = <0x32>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@33 { + reg = <0x33>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@34 { + reg = <0x34>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@35 { + reg = <0x35>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_amx3_in1_port: port@36 { + reg = <0x36>; + + xbar_amx3_in1_ep: endpoint { + remote-endpoint = <&amx3_in1_ep>; + }; + }; + + xbar_amx3_in2_port: port@37 { + reg = <0x37>; + + xbar_amx3_in2_ep: endpoint { + remote-endpoint = <&amx3_in2_ep>; + }; + }; + + xbar_amx3_in3_port: port@38 { + reg = <0x38>; + + xbar_amx3_in3_ep: endpoint { + remote-endpoint = <&amx3_in3_ep>; + }; + }; + + xbar_amx3_in4_port: port@39 { + reg = <0x39>; + + xbar_amx3_in4_ep: endpoint { + remote-endpoint = <&amx3_in4_ep>; + }; + }; + + port@3a { + reg = <0x3a>; + + xbar_amx3_out_ep: endpoint { + remote-endpoint = <&amx3_out_ep>; + }; + }; + + xbar_amx4_in1_port: port@3b { + reg = <0x3b>; + + xbar_amx4_in1_ep: endpoint { + remote-endpoint = <&amx4_in1_ep>; + }; + }; + + xbar_amx4_in2_port: port@3c { + reg = <0x3c>; + + xbar_amx4_in2_ep: endpoint { + remote-endpoint = <&amx4_in2_ep>; + }; + }; + + xbar_amx4_in3_port: port@3d { + reg = <0x3d>; + + xbar_amx4_in3_ep: endpoint { + remote-endpoint = <&amx4_in3_ep>; + }; + }; + + xbar_amx4_in4_port: port@3e { + reg = <0x3e>; + + xbar_amx4_in4_ep: endpoint { + remote-endpoint = <&amx4_in4_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_amx4_out_ep: endpoint { + remote-endpoint = <&amx4_out_ep>; + }; + }; + + xbar_adx1_in_port: port@40 { + reg = <0x40>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@41 { + reg = <0x41>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@43 { + reg = <0x43>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@45 { + reg = <0x45>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@46 { + reg = <0x46>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@47 { + reg = <0x47>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@48 { + reg = <0x48>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@49 { + reg = <0x49>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_adx3_in_port: port@4a { + reg = <0x4a>; + + xbar_adx3_in_ep: endpoint { + remote-endpoint = <&adx3_in_ep>; + }; + }; + + port@4b { + reg = <0x4b>; + + xbar_adx3_out1_ep: endpoint { + remote-endpoint = <&adx3_out1_ep>; + }; + }; + + port@4c { + reg = <0x4c>; + + xbar_adx3_out2_ep: endpoint { + remote-endpoint = <&adx3_out2_ep>; + }; + }; + + port@4d { + reg = <0x4d>; + + xbar_adx3_out3_ep: endpoint { + remote-endpoint = <&adx3_out3_ep>; + }; + }; + + port@4e { + reg = <0x4e>; + + xbar_adx3_out4_ep: endpoint { + remote-endpoint = <&adx3_out4_ep>; + }; + }; + + xbar_adx4_in_port: port@4f { + reg = <0x4f>; + + xbar_adx4_in_ep: endpoint { + remote-endpoint = <&adx4_in_ep>; + }; + }; + + port@50 { + reg = <0x50>; + + xbar_adx4_out1_ep: endpoint { + remote-endpoint = <&adx4_out1_ep>; + }; + }; + + port@51 { + reg = <0x51>; + + xbar_adx4_out2_ep: endpoint { + remote-endpoint = <&adx4_out2_ep>; + }; + }; + + port@52 { + reg = <0x52>; + + xbar_adx4_out3_ep: endpoint { + remote-endpoint = <&adx4_out3_ep>; + }; + }; + + port@53 { + reg = <0x53>; + + xbar_adx4_out4_ep: endpoint { + remote-endpoint = <&adx4_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@54 { + reg = <0x54>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@55 { + reg = <0x55>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@56 { + reg = <0x56>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@57 { + reg = <0x57>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@58 { + reg = <0x58>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@59 { + reg = <0x59>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@5a { + reg = <0x5a>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@5b { + reg = <0x5b>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@5c { + reg = <0x5c>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@5d { + reg = <0x5d>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@5f { + reg = <0x5f>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + i2s@2901000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; }; - admaif@290f000 { + i2s@2901300 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; - admaif0_port: port@0 { - reg = <0x0>; + port@0 { + reg = <0>; - admaif0_ep: endpoint { - remote-endpoint = <&xbar_admaif0_ep>; + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; }; }; - admaif1_port: port@1 { - reg = <0x1>; + i2s4_port: port@1 { + reg = <1>; - admaif1_ep: endpoint { - remote-endpoint = <&xbar_admaif1_ep>; + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ }; }; + }; + }; - admaif2_port: port@2 { - reg = <0x2>; + i2s@2901400 { + status = "okay"; - admaif2_ep: endpoint { - remote-endpoint = <&xbar_admaif2_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s5_ep>; }; }; - admaif3_port: port@3 { - reg = <0x3>; + i2s5_port: port@1 { + reg = <1>; - admaif3_ep: endpoint { - remote-endpoint = <&xbar_admaif3_ep>; + i2s5_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ }; }; + }; + }; - admaif4_port: port@4 { - reg = <0x4>; + i2s@2901500 { + status = "okay"; - admaif4_ep: endpoint { - remote-endpoint = <&xbar_admaif4_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s6_ep>; }; }; - admaif5_port: port@5 { - reg = <0x5>; + i2s6_port: port@1 { + reg = <1>; - admaif5_ep: endpoint { - remote-endpoint = <&xbar_admaif5_ep>; + i2s6_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ }; }; + }; + }; - admaif6_port: port@6 { - reg = <0x6>; + dmic@2904000 { + status = "okay"; - admaif6_ep: endpoint { - remote-endpoint = <&xbar_admaif6_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; }; }; - admaif7_port: port@7 { - reg = <0x7>; + dmic1_port: port@1 { + reg = <1>; - admaif7_ep: endpoint { - remote-endpoint = <&xbar_admaif7_ep>; + dmic1_dap_ep: endpoint { + /* Place holder for external Codec */ }; }; + }; + }; - admaif8_port: port@8 { - reg = <0x8>; + dmic@2904100 { + status = "okay"; - admaif8_ep: endpoint { - remote-endpoint = <&xbar_admaif8_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; }; }; - admaif9_port: port@9 { - reg = <0x9>; + dmic2_port: port@1 { + reg = <1>; - admaif9_ep: endpoint { - remote-endpoint = <&xbar_admaif9_ep>; + dmic2_dap_ep: endpoint { + /* Place holder for external Codec */ }; }; + }; + }; - admaif10_port: port@a { - reg = <0xa>; + dmic@2904200 { + status = "okay"; - admaif10_ep: endpoint { - remote-endpoint = <&xbar_admaif10_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; }; }; - admaif11_port: port@b { - reg = <0xb>; + dmic3_port: port@1 { + reg = <1>; - admaif11_ep: endpoint { - remote-endpoint = <&xbar_admaif11_ep>; + dmic3_dap_ep: endpoint { + /* Place holder for external Codec */ }; }; + }; + }; - admaif12_port: port@c { - reg = <0xc>; + dspk@2905000 { + status = "okay"; - admaif12_ep: endpoint { - remote-endpoint = <&xbar_admaif12_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk1_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk1_ep>; }; }; - admaif13_port: port@d { - reg = <0xd>; + dspk1_port: port@1 { + reg = <1>; - admaif13_ep: endpoint { - remote-endpoint = <&xbar_admaif13_ep>; + dspk1_dap_ep: endpoint { + /* Place holder for external Codec */ }; }; + }; + }; - admaif14_port: port@e { - reg = <0xe>; + dspk@2905100 { + status = "okay"; - admaif14_ep: endpoint { - remote-endpoint = <&xbar_admaif14_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk2_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk2_ep>; }; }; - admaif15_port: port@f { - reg = <0xf>; + dspk2_port: port@1 { + reg = <1>; - admaif15_ep: endpoint { - remote-endpoint = <&xbar_admaif15_ep>; + dspk2_dap_ep: endpoint { + /* Place holder for external Codec */ }; }; + }; + }; - admaif16_port: port@10 { - reg = <0x10>; + sfc@2902000 { + status = "okay"; - admaif16_ep: endpoint { - remote-endpoint = <&xbar_admaif16_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + convert-rate = <44100>; }; }; - admaif17_port: port@11 { - reg = <0x11>; + sfc1_out_port: port@1 { + reg = <1>; - admaif17_ep: endpoint { - remote-endpoint = <&xbar_admaif17_ep>; + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + convert-rate = <48000>; + }; + }; + }; + }; + + sfc@2902200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@2902400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; }; }; + }; + }; - admaif18_port: port@12 { - reg = <0x12>; + sfc@2902600 { + status = "okay"; - admaif18_ep: endpoint { - remote-endpoint = <&xbar_admaif18_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; }; }; - admaif19_port: port@13 { - reg = <0x13>; + sfc4_out_port: port@1 { + reg = <1>; - admaif19_ep: endpoint { - remote-endpoint = <&xbar_admaif19_ep>; + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; }; }; }; }; - i2s@2901000 { + mvc@290a000 { status = "okay"; ports { @@ -456,23 +1375,22 @@ port@0 { reg = <0>; - i2s1_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s1_ep>; + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; }; }; - i2s1_port: port@1 { + mvc1_out_port: port@1 { reg = <1>; - i2s1_dap_ep: endpoint { - dai-format = "i2s"; - /* Placeholder for external Codec */ + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; }; }; }; }; - i2s@2901100 { + mvc@290a200 { status = "okay"; ports { @@ -482,23 +1400,22 @@ port@0 { reg = <0>; - i2s2_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s2_ep>; + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; }; }; - i2s2_port: port@1 { + mvc2_out_port: port@1 { reg = <1>; - i2s2_dap_ep: endpoint { - dai-format = "i2s"; - /* Placeholder for external Codec */ + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; }; }; }; }; - i2s@2901200 { + amx@2903000 { status = "okay"; ports { @@ -508,23 +1425,46 @@ port@0 { reg = <0>; - i2s3_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s3_ep>; + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; }; }; - i2s3_port: port@1 { + port@1 { reg = <1>; - i2s3_dap_ep: endpoint { - dai-format = "i2s"; - /* Placeholder for external Codec */ + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; }; }; }; }; - i2s@2901300 { + amx@2903100 { status = "okay"; ports { @@ -534,23 +1474,46 @@ port@0 { reg = <0>; - i2s4_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s4_ep>; + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; }; }; - i2s4_port: port@1 { + port@1 { reg = <1>; - i2s4_dap_ep: endpoint { - dai-format = "i2s"; - /* Placeholder for external Codec */ + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; }; }; }; }; - i2s@2901400 { + amx@2903200 { status = "okay"; ports { @@ -560,23 +1523,46 @@ port@0 { reg = <0>; - i2s5_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s5_ep>; + amx3_in1_ep: endpoint { + remote-endpoint = <&xbar_amx3_in1_ep>; }; }; - i2s5_port: port@1 { + port@1 { reg = <1>; - i2s5_dap_ep: endpoint { - dai-format = "i2s"; - /* Placeholder for external Codec */ + amx3_in2_ep: endpoint { + remote-endpoint = <&xbar_amx3_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx3_in3_ep: endpoint { + remote-endpoint = <&xbar_amx3_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx3_in4_ep: endpoint { + remote-endpoint = <&xbar_amx3_in4_ep>; + }; + }; + + amx3_out_port: port@4 { + reg = <4>; + + amx3_out_ep: endpoint { + remote-endpoint = <&xbar_amx3_out_ep>; }; }; }; }; - i2s@2901500 { + amx@2903300 { status = "okay"; ports { @@ -586,23 +1572,46 @@ port@0 { reg = <0>; - i2s6_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s6_ep>; + amx4_in1_ep: endpoint { + remote-endpoint = <&xbar_amx4_in1_ep>; }; }; - i2s6_port: port@1 { + port@1 { reg = <1>; - i2s6_dap_ep: endpoint { - dai-format = "i2s"; - /* Placeholder for external Codec */ + amx4_in2_ep: endpoint { + remote-endpoint = <&xbar_amx4_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx4_in3_ep: endpoint { + remote-endpoint = <&xbar_amx4_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx4_in4_ep: endpoint { + remote-endpoint = <&xbar_amx4_in4_ep>; + }; + }; + + amx4_out_port: port@4 { + reg = <4>; + + amx4_out_ep: endpoint { + remote-endpoint = <&xbar_amx4_out_ep>; }; }; }; }; - dmic@2904000 { + adx@2903800 { status = "okay"; ports { @@ -612,22 +1621,46 @@ port@0 { reg = <0>; - dmic1_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic1_ep>; + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; }; }; - dmic1_port: port@1 { + adx1_out1_port: port@1 { reg = <1>; - dmic1_dap_ep: endpoint { - /* Place holder for external Codec */ + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; }; }; }; }; - dmic@2904100 { + adx@2903900 { status = "okay"; ports { @@ -637,22 +1670,46 @@ port@0 { reg = <0>; - dmic2_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic2_ep>; + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; }; }; - dmic2_port: port@1 { + adx2_out1_port: port@1 { reg = <1>; - dmic2_dap_ep: endpoint { - /* Place holder for external Codec */ + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; }; }; }; }; - dmic@2904200 { + adx@2903a00 { status = "okay"; ports { @@ -662,22 +1719,46 @@ port@0 { reg = <0>; - dmic3_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic3_ep>; + adx3_in_ep: endpoint { + remote-endpoint = <&xbar_adx3_in_ep>; }; }; - dmic3_port: port@1 { + adx3_out1_port: port@1 { reg = <1>; - dmic3_dap_ep: endpoint { - /* Place holder for external Codec */ + adx3_out1_ep: endpoint { + remote-endpoint = <&xbar_adx3_out1_ep>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2_ep: endpoint { + remote-endpoint = <&xbar_adx3_out2_ep>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3_ep: endpoint { + remote-endpoint = <&xbar_adx3_out3_ep>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4_ep: endpoint { + remote-endpoint = <&xbar_adx3_out4_ep>; }; }; }; }; - dspk@2905000 { + adx@2903b00 { status = "okay"; ports { @@ -687,22 +1768,46 @@ port@0 { reg = <0>; - dspk1_cif_ep: endpoint { - remote-endpoint = <&xbar_dspk1_ep>; + adx4_in_ep: endpoint { + remote-endpoint = <&xbar_adx4_in_ep>; }; }; - dspk1_port: port@1 { + adx4_out1_port: port@1 { reg = <1>; - dspk1_dap_ep: endpoint { - /* Place holder for external Codec */ + adx4_out1_ep: endpoint { + remote-endpoint = <&xbar_adx4_out1_ep>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2_ep: endpoint { + remote-endpoint = <&xbar_adx4_out2_ep>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3_ep: endpoint { + remote-endpoint = <&xbar_adx4_out3_ep>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4_ep: endpoint { + remote-endpoint = <&xbar_adx4_out4_ep>; }; }; }; }; - dspk@2905100 { + amixer@290bb00 { status = "okay"; ports { @@ -710,18 +1815,122 @@ #size-cells = <0>; port@0 { - reg = <0>; + reg = <0x0>; - dspk2_cif_ep: endpoint { - remote-endpoint = <&xbar_dspk2_ep>; + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; }; }; - dspk2_port: port@1 { - reg = <1>; + port@1 { + reg = <0x1>; - dspk2_dap_ep: endpoint { - /* Place holder for external Codec */ + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; }; }; }; @@ -1104,6 +2313,41 @@ <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_i2s6_port>, <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic3_port>, <&xbar_dspk1_port>, <&xbar_dspk2_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>, + <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>, + <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>, + <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_adx3_in_port>, <&xbar_adx4_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&amx3_out_port>, <&amx4_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&adx3_out1_port>, <&adx3_out2_port>, + <&adx3_out3_port>, <&adx3_out4_port>, + <&adx4_out1_port>, <&adx4_out2_port>, + <&adx4_out3_port>, <&adx4_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, + <&mixer_out3_port>, <&mixer_out4_port>, + <&mixer_out5_port>, /* I/O */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>, diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts index 936b106..af33fe9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -124,7 +124,7 @@ }; hda@3510000 { - nvidia,model = "jetson-tx2-hda"; + nvidia,model = "NVIDIA Jetson TX2 NX HDA"; status = "okay"; }; @@ -715,4 +715,508 @@ }; }; }; + + aconnect@2900000 { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + + ahub@2900800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0_ep: endpoint { + remote-endpoint = <&admaif0_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11_ep: endpoint { + remote-endpoint = <&admaif11_ep>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12_ep: endpoint { + remote-endpoint = <&admaif12_ep>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13_ep: endpoint { + remote-endpoint = <&admaif13_ep>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14_ep: endpoint { + remote-endpoint = <&admaif14_ep>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15_ep: endpoint { + remote-endpoint = <&admaif15_ep>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16_ep: endpoint { + remote-endpoint = <&admaif16_ep>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17_ep: endpoint { + remote-endpoint = <&admaif17_ep>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18_ep: endpoint { + remote-endpoint = <&admaif18_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19_ep: endpoint { + remote-endpoint = <&admaif19_ep>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s3_port: port@16 { + reg = <0x16>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_dmic1_port: port@1a { + reg = <0x1a>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@1b { + reg = <0x1b>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + i2s@2901000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@2904000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + }; + }; + + sound { + compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; + + dais = /* FE */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + /* Router */ + <&xbar_i2s1_port>, <&xbar_i2s3_port>, + <&xbar_dmic1_port>, <&xbar_dmic2_port>, + /* I/O */ + <&i2s1_port>, <&i2s3_port>, + <&dmic1_port>, <&dmic2_port>; + + label = "NVIDIA Jetson TX2 NX APE"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index e94f8ad..9ac4f01 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -354,6 +354,126 @@ sound-name-prefix = "DSPK2"; status = "disabled"; }; + + tegra_sfc1: sfc@2902000 { + compatible = "nvidia,tegra186-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902000 0x200>; + sound-name-prefix = "SFC1"; + status = "disabled"; + }; + + tegra_sfc2: sfc@2902200 { + compatible = "nvidia,tegra186-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902200 0x200>; + sound-name-prefix = "SFC2"; + status = "disabled"; + }; + + tegra_sfc3: sfc@2902400 { + compatible = "nvidia,tegra186-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902400 0x200>; + sound-name-prefix = "SFC3"; + status = "disabled"; + }; + + tegra_sfc4: sfc@2902600 { + compatible = "nvidia,tegra186-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902600 0x200>; + sound-name-prefix = "SFC4"; + status = "disabled"; + }; + + tegra_mvc1: mvc@290a000 { + compatible = "nvidia,tegra186-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a000 0x200>; + sound-name-prefix = "MVC1"; + status = "disabled"; + }; + + tegra_mvc2: mvc@290a200 { + compatible = "nvidia,tegra186-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a200 0x200>; + sound-name-prefix = "MVC2"; + status = "disabled"; + }; + + tegra_amx1: amx@2903000 { + compatible = "nvidia,tegra186-amx", + "nvidia,tegra210-amx"; + reg = <0x2903000 0x100>; + sound-name-prefix = "AMX1"; + status = "disabled"; + }; + + tegra_amx2: amx@2903100 { + compatible = "nvidia,tegra186-amx", + "nvidia,tegra210-amx"; + reg = <0x2903100 0x100>; + sound-name-prefix = "AMX2"; + status = "disabled"; + }; + + tegra_amx3: amx@2903200 { + compatible = "nvidia,tegra186-amx", + "nvidia,tegra210-amx"; + reg = <0x2903200 0x100>; + sound-name-prefix = "AMX3"; + status = "disabled"; + }; + + tegra_amx4: amx@2903300 { + compatible = "nvidia,tegra186-amx", + "nvidia,tegra210-amx"; + reg = <0x2903300 0x100>; + sound-name-prefix = "AMX4"; + status = "disabled"; + }; + + tegra_adx1: adx@2903800 { + compatible = "nvidia,tegra186-adx", + "nvidia,tegra210-adx"; + reg = <0x2903800 0x100>; + sound-name-prefix = "ADX1"; + status = "disabled"; + }; + + tegra_adx2: adx@2903900 { + compatible = "nvidia,tegra186-adx", + "nvidia,tegra210-adx"; + reg = <0x2903900 0x100>; + sound-name-prefix = "ADX2"; + status = "disabled"; + }; + + tegra_adx3: adx@2903a00 { + compatible = "nvidia,tegra186-adx", + "nvidia,tegra210-adx"; + reg = <0x2903a00 0x100>; + sound-name-prefix = "ADX3"; + status = "disabled"; + }; + + tegra_adx4: adx@2903b00 { + compatible = "nvidia,tegra186-adx", + "nvidia,tegra210-adx"; + reg = <0x2903b00 0x100>; + sound-name-prefix = "ADX4"; + status = "disabled"; + }; + + tegra_amixer: amixer@290bb00 { + compatible = "nvidia,tegra186-amixer", + "nvidia,tegra210-amixer"; + reg = <0x290bb00 0x800>; + sound-name-prefix = "MIXER1"; + status = "disabled"; + }; }; }; @@ -1433,6 +1553,22 @@ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; }; + nvdec@15480000 { + compatible = "nvidia,tegra186-nvdec"; + reg = <0x15480000 0x40000>; + clocks = <&bpmp TEGRA186_CLK_NVDEC>; + clock-names = "nvdec"; + resets = <&bpmp TEGRA186_RESET_NVDEC>; + reset-names = "nvdec"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "read-1", "write"; + iommus = <&smmu TEGRA186_SID_NVDEC>; + }; + sor0: sor@15540000 { compatible = "nvidia,tegra186-sor"; reg = <0x15540000 0x10000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 96bd01c..9f34871 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -228,178 +228,1238 @@ remote-endpoint = <&dmic3_cif_ep>; }; }; + + xbar_sfc1_in_port: port@20 { + reg = <0x20>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@21 { + reg = <0x21>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@22 { + reg = <0x22>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@23 { + reg = <0x23>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@24 { + reg = <0x24>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@25 { + reg = <0x25>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@26 { + reg = <0x26>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@28 { + reg = <0x28>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@2a { + reg = <0x2a>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@2c { + reg = <0x2c>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@2d { + reg = <0x2d>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@2e { + reg = <0x2e>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@2f { + reg = <0x2f>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@31 { + reg = <0x31>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@32 { + reg = <0x32>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@33 { + reg = <0x33>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@34 { + reg = <0x34>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@35 { + reg = <0x35>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_amx3_in1_port: port@36 { + reg = <0x36>; + + xbar_amx3_in1_ep: endpoint { + remote-endpoint = <&amx3_in1_ep>; + }; + }; + + xbar_amx3_in2_port: port@37 { + reg = <0x37>; + + xbar_amx3_in2_ep: endpoint { + remote-endpoint = <&amx3_in2_ep>; + }; + }; + + xbar_amx3_in3_port: port@38 { + reg = <0x38>; + + xbar_amx3_in3_ep: endpoint { + remote-endpoint = <&amx3_in3_ep>; + }; + }; + + xbar_amx3_in4_port: port@39 { + reg = <0x39>; + + xbar_amx3_in4_ep: endpoint { + remote-endpoint = <&amx3_in4_ep>; + }; + }; + + port@3a { + reg = <0x3a>; + + xbar_amx3_out_ep: endpoint { + remote-endpoint = <&amx3_out_ep>; + }; + }; + + xbar_amx4_in1_port: port@3b { + reg = <0x3b>; + + xbar_amx4_in1_ep: endpoint { + remote-endpoint = <&amx4_in1_ep>; + }; + }; + + xbar_amx4_in2_port: port@3c { + reg = <0x3c>; + + xbar_amx4_in2_ep: endpoint { + remote-endpoint = <&amx4_in2_ep>; + }; + }; + + xbar_amx4_in3_port: port@3d { + reg = <0x3d>; + + xbar_amx4_in3_ep: endpoint { + remote-endpoint = <&amx4_in3_ep>; + }; + }; + + xbar_amx4_in4_port: port@3e { + reg = <0x3e>; + + xbar_amx4_in4_ep: endpoint { + remote-endpoint = <&amx4_in4_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_amx4_out_ep: endpoint { + remote-endpoint = <&amx4_out_ep>; + }; + }; + + xbar_adx1_in_port: port@40 { + reg = <0x40>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@41 { + reg = <0x41>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@43 { + reg = <0x43>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@45 { + reg = <0x45>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@46 { + reg = <0x46>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@47 { + reg = <0x47>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@48 { + reg = <0x48>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@49 { + reg = <0x49>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_adx3_in_port: port@4a { + reg = <0x4a>; + + xbar_adx3_in_ep: endpoint { + remote-endpoint = <&adx3_in_ep>; + }; + }; + + port@4b { + reg = <0x4b>; + + xbar_adx3_out1_ep: endpoint { + remote-endpoint = <&adx3_out1_ep>; + }; + }; + + port@4c { + reg = <0x4c>; + + xbar_adx3_out2_ep: endpoint { + remote-endpoint = <&adx3_out2_ep>; + }; + }; + + port@4d { + reg = <0x4d>; + + xbar_adx3_out3_ep: endpoint { + remote-endpoint = <&adx3_out3_ep>; + }; + }; + + port@4e { + reg = <0x4e>; + + xbar_adx3_out4_ep: endpoint { + remote-endpoint = <&adx3_out4_ep>; + }; + }; + + xbar_adx4_in_port: port@4f { + reg = <0x4f>; + + xbar_adx4_in_ep: endpoint { + remote-endpoint = <&adx4_in_ep>; + }; + }; + + port@50 { + reg = <0x50>; + + xbar_adx4_out1_ep: endpoint { + remote-endpoint = <&adx4_out1_ep>; + }; + }; + + port@51 { + reg = <0x51>; + + xbar_adx4_out2_ep: endpoint { + remote-endpoint = <&adx4_out2_ep>; + }; + }; + + port@52 { + reg = <0x52>; + + xbar_adx4_out3_ep: endpoint { + remote-endpoint = <&adx4_out3_ep>; + }; + }; + + port@53 { + reg = <0x53>; + + xbar_adx4_out4_ep: endpoint { + remote-endpoint = <&adx4_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@54 { + reg = <0x54>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@55 { + reg = <0x55>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@56 { + reg = <0x56>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@57 { + reg = <0x57>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@58 { + reg = <0x58>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@59 { + reg = <0x59>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@5a { + reg = <0x5a>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@5b { + reg = <0x5b>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@5c { + reg = <0x5c>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@5d { + reg = <0x5d>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@5f { + reg = <0x5f>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + i2s@2901000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + remote-endpoint = <&rt5658_ep>; + }; + }; + }; + }; + + i2s@2901100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901500 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s6_ep>; + }; + }; + + i2s6_port: port@1 { + reg = <1>; + + i2s6_dap_ep: endpoint@0 { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + sfc@2902000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + }; + }; + }; + }; + + sfc@2902200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@2902400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@2902600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + mvc@290a000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@290a200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amx@2903000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; }; - admaif@290f000 { + amx@2903100 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; - admaif0_port: port@0 { - reg = <0x0>; + port@0 { + reg = <0>; - admaif0_ep: endpoint { - remote-endpoint = <&xbar_admaif0_ep>; + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; }; }; - admaif1_port: port@1 { - reg = <0x1>; + port@1 { + reg = <1>; - admaif1_ep: endpoint { - remote-endpoint = <&xbar_admaif1_ep>; + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; }; }; - admaif2_port: port@2 { - reg = <0x2>; + amx2_in3_port: port@2 { + reg = <2>; - admaif2_ep: endpoint { - remote-endpoint = <&xbar_admaif2_ep>; + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; }; }; - admaif3_port: port@3 { - reg = <0x3>; + amx2_in4_port: port@3 { + reg = <3>; - admaif3_ep: endpoint { - remote-endpoint = <&xbar_admaif3_ep>; + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; }; }; - admaif4_port: port@4 { - reg = <0x4>; + amx2_out_port: port@4 { + reg = <4>; - admaif4_ep: endpoint { - remote-endpoint = <&xbar_admaif4_ep>; + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; }; }; + }; + }; - admaif5_port: port@5 { - reg = <0x5>; + amx@2903200 { + status = "okay"; - admaif5_ep: endpoint { - remote-endpoint = <&xbar_admaif5_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1_ep: endpoint { + remote-endpoint = <&xbar_amx3_in1_ep>; }; }; - admaif6_port: port@6 { - reg = <0x6>; + port@1 { + reg = <1>; - admaif6_ep: endpoint { - remote-endpoint = <&xbar_admaif6_ep>; + amx3_in2_ep: endpoint { + remote-endpoint = <&xbar_amx3_in2_ep>; }; }; - admaif7_port: port@7 { - reg = <0x7>; + port@2 { + reg = <2>; - admaif7_ep: endpoint { - remote-endpoint = <&xbar_admaif7_ep>; + amx3_in3_ep: endpoint { + remote-endpoint = <&xbar_amx3_in3_ep>; }; }; - admaif8_port: port@8 { - reg = <0x8>; + port@3 { + reg = <3>; - admaif8_ep: endpoint { - remote-endpoint = <&xbar_admaif8_ep>; + amx3_in4_ep: endpoint { + remote-endpoint = <&xbar_amx3_in4_ep>; }; }; - admaif9_port: port@9 { - reg = <0x9>; + amx3_out_port: port@4 { + reg = <4>; - admaif9_ep: endpoint { - remote-endpoint = <&xbar_admaif9_ep>; + amx3_out_ep: endpoint { + remote-endpoint = <&xbar_amx3_out_ep>; }; }; + }; + }; - admaif10_port: port@a { - reg = <0xa>; + amx@2903300 { + status = "okay"; - admaif10_ep: endpoint { - remote-endpoint = <&xbar_admaif10_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx4_in1_ep: endpoint { + remote-endpoint = <&xbar_amx4_in1_ep>; }; }; - admaif11_port: port@b { - reg = <0xb>; + port@1 { + reg = <1>; - admaif11_ep: endpoint { - remote-endpoint = <&xbar_admaif11_ep>; + amx4_in2_ep: endpoint { + remote-endpoint = <&xbar_amx4_in2_ep>; }; }; - admaif12_port: port@c { - reg = <0xc>; + port@2 { + reg = <2>; - admaif12_ep: endpoint { - remote-endpoint = <&xbar_admaif12_ep>; + amx4_in3_ep: endpoint { + remote-endpoint = <&xbar_amx4_in3_ep>; }; }; - admaif13_port: port@d { - reg = <0xd>; + port@3 { + reg = <3>; - admaif13_ep: endpoint { - remote-endpoint = <&xbar_admaif13_ep>; + amx4_in4_ep: endpoint { + remote-endpoint = <&xbar_amx4_in4_ep>; }; }; - admaif14_port: port@e { - reg = <0xe>; + amx4_out_port: port@4 { + reg = <4>; - admaif14_ep: endpoint { - remote-endpoint = <&xbar_admaif14_ep>; + amx4_out_ep: endpoint { + remote-endpoint = <&xbar_amx4_out_ep>; }; }; + }; + }; - admaif15_port: port@f { - reg = <0xf>; + adx@2903800 { + status = "okay"; - admaif15_ep: endpoint { - remote-endpoint = <&xbar_admaif15_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; }; }; - admaif16_port: port@10 { - reg = <0x10>; + adx1_out1_port: port@1 { + reg = <1>; - admaif16_ep: endpoint { - remote-endpoint = <&xbar_admaif16_ep>; + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; }; }; - admaif17_port: port@11 { - reg = <0x11>; + adx1_out2_port: port@2 { + reg = <2>; - admaif17_ep: endpoint { - remote-endpoint = <&xbar_admaif17_ep>; + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; }; }; - admaif18_port: port@12 { - reg = <0x12>; + adx1_out3_port: port@3 { + reg = <3>; - admaif18_ep: endpoint { - remote-endpoint = <&xbar_admaif18_ep>; + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; }; }; - admaif19_port: port@13 { - reg = <0x13>; + adx1_out4_port: port@4 { + reg = <4>; - admaif19_ep: endpoint { - remote-endpoint = <&xbar_admaif19_ep>; + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; }; }; }; }; - i2s@2901000 { + adx@2903900 { status = "okay"; ports { @@ -409,49 +1469,46 @@ port@0 { reg = <0>; - i2s1_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s1_ep>; + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; }; }; - i2s1_port: port@1 { + adx2_out1_port: port@1 { reg = <1>; - i2s1_dap_ep: endpoint { - dai-format = "i2s"; - remote-endpoint = <&rt5658_ep>; + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; }; }; - }; - }; - i2s@2901100 { - status = "okay"; + adx2_out2_port: port@2 { + reg = <2>; - ports { - #address-cells = <1>; - #size-cells = <0>; + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; - port@0 { - reg = <0>; + adx2_out3_port: port@3 { + reg = <3>; - i2s2_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s2_ep>; + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; }; }; - i2s2_port: port@1 { - reg = <1>; + adx2_out4_port: port@4 { + reg = <4>; - i2s2_dap_ep: endpoint { - dai-format = "i2s"; - /* Place holder for external Codec */ + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; }; }; }; }; - i2s@2901300 { + adx@2903a00 { status = "okay"; ports { @@ -461,23 +1518,46 @@ port@0 { reg = <0>; - i2s4_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s4_ep>; + adx3_in_ep: endpoint { + remote-endpoint = <&xbar_adx3_in_ep>; }; }; - i2s4_port: port@1 { + adx3_out1_port: port@1 { reg = <1>; - i2s4_dap_ep: endpoint { - dai-format = "i2s"; - /* Place holder for external Codec */ + adx3_out1_ep: endpoint { + remote-endpoint = <&xbar_adx3_out1_ep>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2_ep: endpoint { + remote-endpoint = <&xbar_adx3_out2_ep>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3_ep: endpoint { + remote-endpoint = <&xbar_adx3_out3_ep>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4_ep: endpoint { + remote-endpoint = <&xbar_adx3_out4_ep>; }; }; }; }; - i2s@2901500 { + adx@2903b00 { status = "okay"; ports { @@ -487,23 +1567,46 @@ port@0 { reg = <0>; - i2s6_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s6_ep>; + adx4_in_ep: endpoint { + remote-endpoint = <&xbar_adx4_in_ep>; }; }; - i2s6_port: port@1 { + adx4_out1_port: port@1 { reg = <1>; - i2s6_dap_ep: endpoint@0 { - dai-format = "i2s"; - /* Place holder for external Codec */ + adx4_out1_ep: endpoint { + remote-endpoint = <&xbar_adx4_out1_ep>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2_ep: endpoint { + remote-endpoint = <&xbar_adx4_out2_ep>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3_ep: endpoint { + remote-endpoint = <&xbar_adx4_out3_ep>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4_ep: endpoint { + remote-endpoint = <&xbar_adx4_out4_ep>; }; }; }; }; - dmic@2904200 { + amixer@290bb00 { status = "okay"; ports { @@ -511,18 +1614,122 @@ #size-cells = <0>; port@0 { - reg = <0>; + reg = <0x0>; - dmic3_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic3_ep>; + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; }; }; - dmic3_port: port@1 { - reg = <1>; + port@1 { + reg = <0x1>; - dmic3_dap_ep: endpoint { - /* Place holder for external Codec */ + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; }; }; }; @@ -764,7 +1971,7 @@ "p2u-5", "p2u-6", "p2u-7"; }; - pcie_ep@141a0000 { + pcie-ep@141a0000 { status = "disabled"; vddio-pex-ctl-supply = <&vdd_1v8ao>; @@ -827,6 +2034,40 @@ /* XBAR Ports */ <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>, <&xbar_i2s6_port>, <&xbar_dmic3_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>, + <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>, + <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>, + <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_adx3_in_port>, <&xbar_adx4_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&amx3_out_port>, <&amx4_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&adx3_out1_port>, <&adx3_out2_port>, + <&adx3_out3_port>, <&adx3_out4_port>, + <&adx4_out1_port>, <&adx4_out2_port>, + <&adx4_out3_port>, <&adx4_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, + <&mixer_out4_port>, <&mixer_out5_port>, /* BE I/O Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi index 836a7e0..a055f17 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi @@ -238,178 +238,1190 @@ remote-endpoint = <&dspk2_cif_ep>; }; }; + + xbar_sfc1_in_port: port@20 { + reg = <0x20>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@21 { + reg = <0x21>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@22 { + reg = <0x22>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@23 { + reg = <0x23>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@24 { + reg = <0x24>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@25 { + reg = <0x25>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@26 { + reg = <0x26>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@28 { + reg = <0x28>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@2a { + reg = <0x2a>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@2c { + reg = <0x2c>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@2d { + reg = <0x2d>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@2e { + reg = <0x2e>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@2f { + reg = <0x2f>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@31 { + reg = <0x31>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@32 { + reg = <0x32>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@33 { + reg = <0x33>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@34 { + reg = <0x34>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@35 { + reg = <0x35>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_amx3_in1_port: port@36 { + reg = <0x36>; + + xbar_amx3_in1_ep: endpoint { + remote-endpoint = <&amx3_in1_ep>; + }; + }; + + xbar_amx3_in2_port: port@37 { + reg = <0x37>; + + xbar_amx3_in2_ep: endpoint { + remote-endpoint = <&amx3_in2_ep>; + }; + }; + + xbar_amx3_in3_port: port@38 { + reg = <0x38>; + + xbar_amx3_in3_ep: endpoint { + remote-endpoint = <&amx3_in3_ep>; + }; + }; + + xbar_amx3_in4_port: port@39 { + reg = <0x39>; + + xbar_amx3_in4_ep: endpoint { + remote-endpoint = <&amx3_in4_ep>; + }; + }; + + port@3a { + reg = <0x3a>; + + xbar_amx3_out_ep: endpoint { + remote-endpoint = <&amx3_out_ep>; + }; + }; + + xbar_amx4_in1_port: port@3b { + reg = <0x3b>; + + xbar_amx4_in1_ep: endpoint { + remote-endpoint = <&amx4_in1_ep>; + }; + }; + + xbar_amx4_in2_port: port@3c { + reg = <0x3c>; + + xbar_amx4_in2_ep: endpoint { + remote-endpoint = <&amx4_in2_ep>; + }; + }; + + xbar_amx4_in3_port: port@3d { + reg = <0x3d>; + + xbar_amx4_in3_ep: endpoint { + remote-endpoint = <&amx4_in3_ep>; + }; + }; + + xbar_amx4_in4_port: port@3e { + reg = <0x3e>; + + xbar_amx4_in4_ep: endpoint { + remote-endpoint = <&amx4_in4_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_amx4_out_ep: endpoint { + remote-endpoint = <&amx4_out_ep>; + }; + }; + + xbar_adx1_in_port: port@40 { + reg = <0x40>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@41 { + reg = <0x41>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@43 { + reg = <0x43>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@45 { + reg = <0x45>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@46 { + reg = <0x46>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@47 { + reg = <0x47>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@48 { + reg = <0x48>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@49 { + reg = <0x49>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_adx3_in_port: port@4a { + reg = <0x4a>; + + xbar_adx3_in_ep: endpoint { + remote-endpoint = <&adx3_in_ep>; + }; + }; + + port@4b { + reg = <0x4b>; + + xbar_adx3_out1_ep: endpoint { + remote-endpoint = <&adx3_out1_ep>; + }; + }; + + port@4c { + reg = <0x4c>; + + xbar_adx3_out2_ep: endpoint { + remote-endpoint = <&adx3_out2_ep>; + }; + }; + + port@4d { + reg = <0x4d>; + + xbar_adx3_out3_ep: endpoint { + remote-endpoint = <&adx3_out3_ep>; + }; + }; + + port@4e { + reg = <0x4e>; + + xbar_adx3_out4_ep: endpoint { + remote-endpoint = <&adx3_out4_ep>; + }; + }; + + xbar_adx4_in_port: port@4f { + reg = <0x4f>; + + xbar_adx4_in_ep: endpoint { + remote-endpoint = <&adx4_in_ep>; + }; + }; + + port@50 { + reg = <0x50>; + + xbar_adx4_out1_ep: endpoint { + remote-endpoint = <&adx4_out1_ep>; + }; + }; + + port@51 { + reg = <0x51>; + + xbar_adx4_out2_ep: endpoint { + remote-endpoint = <&adx4_out2_ep>; + }; + }; + + port@52 { + reg = <0x52>; + + xbar_adx4_out3_ep: endpoint { + remote-endpoint = <&adx4_out3_ep>; + }; + }; + + port@53 { + reg = <0x53>; + + xbar_adx4_out4_ep: endpoint { + remote-endpoint = <&adx4_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@54 { + reg = <0x54>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@55 { + reg = <0x55>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@56 { + reg = <0x56>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@57 { + reg = <0x57>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@58 { + reg = <0x58>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@59 { + reg = <0x59>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@5a { + reg = <0x5a>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@5b { + reg = <0x5b>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@5c { + reg = <0x5c>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@5d { + reg = <0x5d>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@5f { + reg = <0x5f>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + i2s@2901200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s5_ep>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap_ep: endpoint@0 { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; }; - admaif@290f000 { + dmic@2904000 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; - admaif0_port: port@0 { - reg = <0x0>; + port@0 { + reg = <0>; - admaif0_ep: endpoint { - remote-endpoint = <&xbar_admaif0_ep>; + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; }; }; - admaif1_port: port@1 { - reg = <0x1>; + dmic1_port: port@1 { + reg = <1>; - admaif1_ep: endpoint { - remote-endpoint = <&xbar_admaif1_ep>; + dmic1_dap_ep: endpoint { + /* Place holder for external Codec */ }; }; + }; + }; - admaif2_port: port@2 { - reg = <0x2>; + dmic@2904100 { + status = "okay"; - admaif2_ep: endpoint { - remote-endpoint = <&xbar_admaif2_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; }; }; - admaif3_port: port@3 { - reg = <0x3>; + dmic2_port: port@1 { + reg = <1>; - admaif3_ep: endpoint { - remote-endpoint = <&xbar_admaif3_ep>; + dmic2_dap_ep: endpoint { + /* Place holder for external Codec */ }; }; + }; + }; - admaif4_port: port@4 { - reg = <0x4>; + dmic@2904300 { + status = "okay"; - admaif4_ep: endpoint { - remote-endpoint = <&xbar_admaif4_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic4_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic4_ep>; + }; + }; + + dmic4_port: port@1 { + reg = <1>; + + dmic4_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk1_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk1_ep>; + }; + }; + + dspk1_port: port@1 { + reg = <1>; + + dspk1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk2_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk2_ep>; + }; + }; + + dspk2_port: port@1 { + reg = <1>; + + dspk2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + sfc@2902000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + convert-rate = <44100>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + convert-rate = <48000>; + }; + }; + }; + }; + + sfc@2902200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@2902400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@2902600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + mvc@290a000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@290a200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amx@2903000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; }; }; - admaif5_port: port@5 { - reg = <0x5>; + port@1 { + reg = <1>; - admaif5_ep: endpoint { - remote-endpoint = <&xbar_admaif5_ep>; + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; }; }; - admaif6_port: port@6 { - reg = <0x6>; + port@2 { + reg = <2>; - admaif6_ep: endpoint { - remote-endpoint = <&xbar_admaif6_ep>; + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; }; }; - admaif7_port: port@7 { - reg = <0x7>; + port@3 { + reg = <3>; - admaif7_ep: endpoint { - remote-endpoint = <&xbar_admaif7_ep>; + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; }; }; - admaif8_port: port@8 { - reg = <0x8>; + amx1_out_port: port@4 { + reg = <4>; - admaif8_ep: endpoint { - remote-endpoint = <&xbar_admaif8_ep>; + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; }; }; + }; + }; - admaif9_port: port@9 { - reg = <0x9>; + amx@2903100 { + status = "okay"; - admaif9_ep: endpoint { - remote-endpoint = <&xbar_admaif9_ep>; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; - admaif10_port: port@a { - reg = <0xa>; + port@0 { + reg = <0>; - admaif10_ep: endpoint { - remote-endpoint = <&xbar_admaif10_ep>; + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; }; }; - admaif11_port: port@b { - reg = <0xb>; + port@1 { + reg = <1>; - admaif11_ep: endpoint { - remote-endpoint = <&xbar_admaif11_ep>; + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; }; }; - admaif12_port: port@c { - reg = <0xc>; + amx2_in3_port: port@2 { + reg = <2>; - admaif12_ep: endpoint { - remote-endpoint = <&xbar_admaif12_ep>; + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; }; }; - admaif13_port: port@d { - reg = <0xd>; + amx2_in4_port: port@3 { + reg = <3>; - admaif13_ep: endpoint { - remote-endpoint = <&xbar_admaif13_ep>; + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; }; }; - admaif14_port: port@e { - reg = <0xe>; + amx2_out_port: port@4 { + reg = <4>; - admaif14_ep: endpoint { - remote-endpoint = <&xbar_admaif14_ep>; + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; }; }; + }; + }; - admaif15_port: port@f { - reg = <0xf>; + amx@2903200 { + status = "okay"; - admaif15_ep: endpoint { - remote-endpoint = <&xbar_admaif15_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1_ep: endpoint { + remote-endpoint = <&xbar_amx3_in1_ep>; }; }; - admaif16_port: port@10 { - reg = <0x10>; + port@1 { + reg = <1>; - admaif16_ep: endpoint { - remote-endpoint = <&xbar_admaif16_ep>; + amx3_in2_ep: endpoint { + remote-endpoint = <&xbar_amx3_in2_ep>; }; }; - admaif17_port: port@11 { - reg = <0x11>; + port@2 { + reg = <2>; - admaif17_ep: endpoint { - remote-endpoint = <&xbar_admaif17_ep>; + amx3_in3_ep: endpoint { + remote-endpoint = <&xbar_amx3_in3_ep>; }; }; - admaif18_port: port@12 { - reg = <0x12>; + port@3 { + reg = <3>; - admaif18_ep: endpoint { - remote-endpoint = <&xbar_admaif18_ep>; + amx3_in4_ep: endpoint { + remote-endpoint = <&xbar_amx3_in4_ep>; }; }; - admaif19_port: port@13 { - reg = <0x13>; + amx3_out_port: port@4 { + reg = <4>; - admaif19_ep: endpoint { - remote-endpoint = <&xbar_admaif19_ep>; + amx3_out_ep: endpoint { + remote-endpoint = <&xbar_amx3_out_ep>; }; }; }; }; - i2s@2901200 { + amx@2903300 { status = "okay"; ports { @@ -419,49 +1431,46 @@ port@0 { reg = <0>; - i2s3_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s3_ep>; + amx4_in1_ep: endpoint { + remote-endpoint = <&xbar_amx4_in1_ep>; }; }; - i2s3_port: port@1 { + port@1 { reg = <1>; - i2s3_dap_ep: endpoint { - dai-format = "i2s"; - /* Place holder for external Codec */ + amx4_in2_ep: endpoint { + remote-endpoint = <&xbar_amx4_in2_ep>; }; }; - }; - }; - i2s@2901400 { - status = "okay"; + port@2 { + reg = <2>; - ports { - #address-cells = <1>; - #size-cells = <0>; + amx4_in3_ep: endpoint { + remote-endpoint = <&xbar_amx4_in3_ep>; + }; + }; - port@0 { - reg = <0>; + port@3 { + reg = <3>; - i2s5_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s5_ep>; + amx4_in4_ep: endpoint { + remote-endpoint = <&xbar_amx4_in4_ep>; }; }; - i2s5_port: port@1 { - reg = <1>; + amx4_out_port: port@4 { + reg = <4>; - i2s5_dap_ep: endpoint@0 { - dai-format = "i2s"; - /* Place holder for external Codec */ + amx4_out_ep: endpoint { + remote-endpoint = <&xbar_amx4_out_ep>; }; }; }; }; - dmic@2904000 { + adx@2903800 { status = "okay"; ports { @@ -471,22 +1480,46 @@ port@0 { reg = <0>; - dmic1_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic1_ep>; + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; }; }; - dmic1_port: port@1 { + adx1_out1_port: port@1 { reg = <1>; - dmic1_dap_ep: endpoint { - /* Place holder for external Codec */ + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; }; }; }; }; - dmic@2904100 { + adx@2903900 { status = "okay"; ports { @@ -496,22 +1529,46 @@ port@0 { reg = <0>; - dmic2_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic2_ep>; + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; }; }; - dmic2_port: port@1 { + adx2_out1_port: port@1 { reg = <1>; - dmic2_dap_ep: endpoint { - /* Place holder for external Codec */ + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; }; }; }; }; - dmic@2904300 { + adx@2903a00 { status = "okay"; ports { @@ -521,22 +1578,46 @@ port@0 { reg = <0>; - dmic4_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic4_ep>; + adx3_in_ep: endpoint { + remote-endpoint = <&xbar_adx3_in_ep>; }; }; - dmic4_port: port@1 { + adx3_out1_port: port@1 { reg = <1>; - dmic4_dap_ep: endpoint { - /* Place holder for external Codec */ + adx3_out1_ep: endpoint { + remote-endpoint = <&xbar_adx3_out1_ep>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2_ep: endpoint { + remote-endpoint = <&xbar_adx3_out2_ep>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3_ep: endpoint { + remote-endpoint = <&xbar_adx3_out3_ep>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4_ep: endpoint { + remote-endpoint = <&xbar_adx3_out4_ep>; }; }; }; }; - dspk@2905000 { + adx@2903b00 { status = "okay"; ports { @@ -546,22 +1627,46 @@ port@0 { reg = <0>; - dspk1_cif_ep: endpoint { - remote-endpoint = <&xbar_dspk1_ep>; + adx4_in_ep: endpoint { + remote-endpoint = <&xbar_adx4_in_ep>; }; }; - dspk1_port: port@1 { + adx4_out1_port: port@1 { reg = <1>; - dspk1_dap_ep: endpoint { - /* Place holder for external Codec */ + adx4_out1_ep: endpoint { + remote-endpoint = <&xbar_adx4_out1_ep>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2_ep: endpoint { + remote-endpoint = <&xbar_adx4_out2_ep>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3_ep: endpoint { + remote-endpoint = <&xbar_adx4_out3_ep>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4_ep: endpoint { + remote-endpoint = <&xbar_adx4_out4_ep>; }; }; }; }; - dspk@2905100 { + amixer@290bb00 { status = "okay"; ports { @@ -569,18 +1674,122 @@ #size-cells = <0>; port@0 { - reg = <0>; + reg = <0x0>; - dspk2_cif_ep: endpoint { - remote-endpoint = <&xbar_dspk2_ep>; + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; }; }; - dspk2_port: port@1 { - reg = <1>; + port@1 { + reg = <0x1>; - dspk2_dap_ep: endpoint { - /* Place holder for external Codec */ + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; }; }; }; @@ -741,7 +1950,7 @@ "p2u-5", "p2u-6", "p2u-7"; }; - pcie_ep@141a0000 { + pcie-ep@141a0000 { status = "disabled"; vddio-pex-ctl-supply = <&vdd_1v8ao>; @@ -850,6 +2059,41 @@ <&xbar_i2s3_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic4_port>, <&xbar_dspk1_port>, <&xbar_dspk2_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>, + <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>, + <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>, + <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_adx3_in_port>, <&xbar_adx4_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&amx3_out_port>, <&amx4_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&adx3_out1_port>, <&adx3_out2_port>, + <&adx3_out3_port>, <&adx3_out4_port>, + <&adx4_out1_port>, <&adx4_out2_port>, + <&adx4_out3_port>, <&adx4_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, + <&mixer_out3_port>, <&mixer_out4_port>, + <&mixer_out5_port>, /* BE I/O Ports */ <&i2s3_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic4_port>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index c8250a3..851e049 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -34,11 +34,53 @@ reg = <0x2200000 0x10000>, <0x2210000 0x10000>; interrupts = , + , + , + , + , + , + , + , , + , + , + , + , + , + , + , , + , + , + , + , + , + , + , , + , + , + , + , + , + , + , , - ; + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; #interrupt-cells = <2>; interrupt-controller; #gpio-cells = <2>; @@ -363,6 +405,122 @@ sound-name-prefix = "DSPK2"; status = "disabled"; }; + + tegra_sfc1: sfc@2902000 { + compatible = "nvidia,tegra194-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902000 0x200>; + sound-name-prefix = "SFC1"; + status = "disabled"; + }; + + tegra_sfc2: sfc@2902200 { + compatible = "nvidia,tegra194-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902200 0x200>; + sound-name-prefix = "SFC2"; + status = "disabled"; + }; + + tegra_sfc3: sfc@2902400 { + compatible = "nvidia,tegra194-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902400 0x200>; + sound-name-prefix = "SFC3"; + status = "disabled"; + }; + + tegra_sfc4: sfc@2902600 { + compatible = "nvidia,tegra194-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902600 0x200>; + sound-name-prefix = "SFC4"; + status = "disabled"; + }; + + tegra_mvc1: mvc@290a000 { + compatible = "nvidia,tegra194-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a000 0x200>; + sound-name-prefix = "MVC1"; + status = "disabled"; + }; + + tegra_mvc2: mvc@290a200 { + compatible = "nvidia,tegra194-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a200 0x200>; + sound-name-prefix = "MVC2"; + status = "disabled"; + }; + + tegra_amx1: amx@2903000 { + compatible = "nvidia,tegra194-amx"; + reg = <0x2903000 0x100>; + sound-name-prefix = "AMX1"; + status = "disabled"; + }; + + tegra_amx2: amx@2903100 { + compatible = "nvidia,tegra194-amx"; + reg = <0x2903100 0x100>; + sound-name-prefix = "AMX2"; + status = "disabled"; + }; + + tegra_amx3: amx@2903200 { + compatible = "nvidia,tegra194-amx"; + reg = <0x2903200 0x100>; + sound-name-prefix = "AMX3"; + status = "disabled"; + }; + + tegra_amx4: amx@2903300 { + compatible = "nvidia,tegra194-amx"; + reg = <0x2903300 0x100>; + sound-name-prefix = "AMX4"; + status = "disabled"; + }; + + tegra_adx1: adx@2903800 { + compatible = "nvidia,tegra194-adx", + "nvidia,tegra210-adx"; + reg = <0x2903800 0x100>; + sound-name-prefix = "ADX1"; + status = "disabled"; + }; + + tegra_adx2: adx@2903900 { + compatible = "nvidia,tegra194-adx", + "nvidia,tegra210-adx"; + reg = <0x2903900 0x100>; + sound-name-prefix = "ADX2"; + status = "disabled"; + }; + + tegra_adx3: adx@2903a00 { + compatible = "nvidia,tegra194-adx", + "nvidia,tegra210-adx"; + reg = <0x2903a00 0x100>; + sound-name-prefix = "ADX3"; + status = "disabled"; + }; + + tegra_adx4: adx@2903b00 { + compatible = "nvidia,tegra194-adx", + "nvidia,tegra210-adx"; + reg = <0x2903b00 0x100>; + sound-name-prefix = "ADX4"; + status = "disabled"; + }; + + tegra_amixer: amixer@290bb00 { + compatible = "nvidia,tegra194-amixer", + "nvidia,tegra210-amixer"; + reg = <0x290bb00 0x800>; + sound-name-prefix = "MIXER1"; + status = "disabled"; + }; }; }; @@ -1281,7 +1439,10 @@ reg-names = "security", "gpio"; reg = <0xc2f0000 0x1000>, <0xc2f1000 0x1000>; - interrupts = ; + interrupts = , + , + , + ; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1412,6 +1573,25 @@ interconnect-names = "dma-mem"; iommus = <&smmu TEGRA194_SID_HOST1X>; + nvdec@15140000 { + compatible = "nvidia,tegra194-nvdec"; + reg = <0x15140000 0x00040000>; + clocks = <&bpmp TEGRA194_CLK_NVDEC1>; + clock-names = "nvdec"; + resets = <&bpmp TEGRA194_RESET_NVDEC1>; + reset-names = "nvdec"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVDECB>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDEC1SRD &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDEC1SRD1 &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDEC1SWR &emc>; + interconnect-names = "dma-mem", "read-1", "write"; + iommus = <&smmu TEGRA194_SID_NVDEC1>; + dma-coherent; + + nvidia,host1x-class = <0xf5>; + }; + display-hub@15200000 { compatible = "nvidia,tegra194-display"; reg = <0x15200000 0x00040000>; @@ -1525,6 +1705,25 @@ iommus = <&smmu TEGRA194_SID_VIC>; }; + nvdec@15480000 { + compatible = "nvidia,tegra194-nvdec"; + reg = <0x15480000 0x00040000>; + clocks = <&bpmp TEGRA194_CLK_NVDEC>; + clock-names = "nvdec"; + resets = <&bpmp TEGRA194_RESET_NVDEC>; + reset-names = "nvdec"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVDECA>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDECSRD1 &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "read-1", "write"; + iommus = <&smmu TEGRA194_SID_NVDEC>; + dma-coherent; + + nvidia,host1x-class = <0xf0>; + }; + dpaux0: dpaux@155c0000 { compatible = "nvidia,tegra194-dpaux"; reg = <0x155c0000 0x10000>; @@ -2121,7 +2320,7 @@ dma-coherent; }; - pcie_ep@14160000 { + pcie-ep@14160000 { compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ @@ -2161,7 +2360,7 @@ dma-coherent; }; - pcie_ep@14180000 { + pcie-ep@14180000 { compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ @@ -2201,7 +2400,7 @@ dma-coherent; }; - pcie_ep@141a0000 { + pcie-ep@141a0000 { compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 7d3e363..2e17df6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -339,6 +339,481 @@ }; }; + sfc@702d2000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + }; + }; + }; + }; + + sfc@702d2200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@702d2400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@702d2600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + mvc@702da000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@702da200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amx@702d3000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; + }; + + amx@702d3100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; + }; + }; + }; + }; + + adx@702d3800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; + }; + }; + }; + }; + + adx@702d3900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; + }; + }; + }; + }; + + amixer@702dbb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; + }; + }; + }; + }; + ports { xbar_i2s1_port: port@a { reg = <0xa>; @@ -403,6 +878,382 @@ remote-endpoint = <&dmic3_cif_ep>; }; }; + + xbar_sfc1_in_port: port@12 { + reg = <0x12>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@14 { + reg = <0x14>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@15 { + reg = <0x15>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@16 { + reg = <0x16>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@17 { + reg = <0x17>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@18 { + reg = <0x18>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@19 { + reg = <0x19>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@1a { + reg = <0x1a>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@1b { + reg = <0x1b>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@1c { + reg = <0x1c>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@1d { + reg = <0x1d>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@1e { + reg = <0x1e>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@1f { + reg = <0x1f>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@20 { + reg = <0x20>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@21 { + reg = <0x21>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@22 { + reg = <0x22>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@23 { + reg = <0x23>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@24 { + reg = <0x24>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@25 { + reg = <0x25>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@26 { + reg = <0x26>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_adx1_in_port: port@28 { + reg = <0x28>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@2a { + reg = <0x2a>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@2c { + reg = <0x2c>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@2d { + reg = <0x2d>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@2e { + reg = <0x2e>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@2f { + reg = <0x2f>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@31 { + reg = <0x31>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@32 { + reg = <0x32>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@33 { + reg = <0x33>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@34 { + reg = <0x34>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@35 { + reg = <0x35>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@36 { + reg = <0x36>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@37 { + reg = <0x37>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@38 { + reg = <0x38>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@39 { + reg = <0x39>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@3a { + reg = <0x3a>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@3b { + reg = <0x3b>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@3c { + reg = <0x3c>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@3d { + reg = <0x3d>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@3e { + reg = <0x3e>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@40 { + reg = <0x40>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; }; }; }; @@ -420,6 +1271,31 @@ <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>, <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic3_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, + <&mixer_out3_port>, <&mixer_out4_port>, + <&mixer_out5_port>, /* I/O DAP Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 7dbb13f..030f264 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -746,6 +746,481 @@ }; }; + sfc@702d2000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + }; + }; + }; + }; + + sfc@702d2200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@702d2400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@702d2600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + mvc@702da000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@702da200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amx@702d3000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; + }; + + amx@702d3100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; + }; + }; + }; + }; + + adx@702d3800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; + }; + }; + }; + }; + + adx@702d3900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; + }; + }; + }; + }; + + amixer@702dbb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; + }; + }; + }; + }; + ports { xbar_i2s3_port: port@c { reg = <0xc>; @@ -778,6 +1253,382 @@ remote-endpoint = <&dmic2_cif_ep>; }; }; + + xbar_sfc1_in_port: port@12 { + reg = <0x12>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@14 { + reg = <0x14>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@15 { + reg = <0x15>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@16 { + reg = <0x16>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@17 { + reg = <0x17>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@18 { + reg = <0x18>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@19 { + reg = <0x19>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@1a { + reg = <0x1a>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@1b { + reg = <0x1b>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@1c { + reg = <0x1c>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@1d { + reg = <0x1d>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@1e { + reg = <0x1e>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@1f { + reg = <0x1f>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@20 { + reg = <0x20>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@21 { + reg = <0x21>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@22 { + reg = <0x22>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@23 { + reg = <0x23>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@24 { + reg = <0x24>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@25 { + reg = <0x25>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@26 { + reg = <0x26>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_adx1_in_port: port@28 { + reg = <0x28>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@2a { + reg = <0x2a>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@2c { + reg = <0x2c>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@2d { + reg = <0x2d>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@2e { + reg = <0x2e>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@2f { + reg = <0x2f>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@31 { + reg = <0x31>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@32 { + reg = <0x32>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@33 { + reg = <0x33>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@34 { + reg = <0x34>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@35 { + reg = <0x35>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@36 { + reg = <0x36>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@37 { + reg = <0x37>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@38 { + reg = <0x38>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@39 { + reg = <0x39>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@3a { + reg = <0x3a>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@3b { + reg = <0x3b>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@3c { + reg = <0x3c>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@3d { + reg = <0x3d>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@3e { + reg = <0x3e>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@40 { + reg = <0x40>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; }; }; }; @@ -1039,6 +1890,31 @@ /* Router */ <&xbar_i2s3_port>, <&xbar_i2s4_port>, <&xbar_dmic1_port>, <&xbar_dmic2_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, + <&mixer_out3_port>, <&mixer_out4_port>, + <&mixer_out5_port>, /* I/O DAP Ports */ <&i2s3_port>, <&i2s4_port>, <&dmic1_port>, <&dmic2_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 26b3f98..ccdc0de 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1641,6 +1641,83 @@ status = "disabled"; }; + tegra_sfc1: sfc@702d2000 { + compatible = "nvidia,tegra210-sfc"; + reg = <0x702d2000 0x200>; + sound-name-prefix = "SFC1"; + status = "disabled"; + }; + + tegra_sfc2: sfc@702d2200 { + compatible = "nvidia,tegra210-sfc"; + reg = <0x702d2200 0x200>; + sound-name-prefix = "SFC2"; + status = "disabled"; + }; + + tegra_sfc3: sfc@702d2400 { + compatible = "nvidia,tegra210-sfc"; + reg = <0x702d2400 0x200>; + sound-name-prefix = "SFC3"; + status = "disabled"; + }; + + tegra_sfc4: sfc@702d2600 { + compatible = "nvidia,tegra210-sfc"; + reg = <0x702d2600 0x200>; + sound-name-prefix = "SFC4"; + status = "disabled"; + }; + + tegra_mvc1: mvc@702da000 { + compatible = "nvidia,tegra210-mvc"; + reg = <0x702da000 0x200>; + sound-name-prefix = "MVC1"; + status = "disabled"; + }; + + tegra_mvc2: mvc@702da200 { + compatible = "nvidia,tegra210-mvc"; + reg = <0x702da200 0x200>; + sound-name-prefix = "MVC2"; + status = "disabled"; + }; + + tegra_amx1: amx@702d3000 { + compatible = "nvidia,tegra210-amx"; + reg = <0x702d3000 0x100>; + sound-name-prefix = "AMX1"; + status = "disabled"; + }; + + tegra_amx2: amx@702d3100 { + compatible = "nvidia,tegra210-amx"; + reg = <0x702d3100 0x100>; + sound-name-prefix = "AMX2"; + status = "disabled"; + }; + + tegra_adx1: adx@702d3800 { + compatible = "nvidia,tegra210-adx"; + reg = <0x702d3800 0x100>; + sound-name-prefix = "ADX1"; + status = "disabled"; + }; + + tegra_adx2: adx@702d3900 { + compatible = "nvidia,tegra210-adx"; + reg = <0x702d3900 0x100>; + sound-name-prefix = "ADX2"; + status = "disabled"; + }; + + tegra_amixer: amixer@702dbb00 { + compatible = "nvidia,tegra210-amixer"; + reg = <0x702dbb00 0x800>; + sound-name-prefix = "MIXER1"; + status = "disabled"; + }; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1743,7 +1820,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; interrupts = ; phy_type = "utmi"; @@ -1781,7 +1858,7 @@ }; usb@7d004000 { - compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; interrupts = ; phy_type = "utmi"; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 7051650..6b816eb 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb @@ -33,12 +34,18 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-cheeseburger.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb @@ -48,6 +55,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb @@ -66,6 +75,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb @@ -84,6 +94,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index f3c0dbf..a5320d6 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -5,9 +5,839 @@ /dts-v1/; -#include "apq8016-sbc.dtsi" +#include "msm8916-pm8916.dtsi" +#include +#include +#include +#include +#include / { model = "Qualcomm Technologies, Inc. APQ 8016 SBC"; compatible = "qcom,apq8016-sbc", "qcom,apq8016"; + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp1_uart1; + usid0 = &pm8916_0; + i2c0 = &blsp_i2c2; + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; + spi0 = &blsp_spi5; + spi1 = &blsp_spi3; + }; + + chosen { + stdout-path = "serial0"; + }; + + camera_vdddo_1v8: camera-vdddo-1v8 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdddo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + camera_vdda_2v8: camera-vdda-2v8 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdda"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + camera_vddd_1v5: camera-vddd-1v5 { + compatible = "regulator-fixed"; + regulator-name = "camera_vddd"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reserved-memory { + ramoops@bff00000 { + compatible = "ramoops"; + reg = <0x0 0xbff00000 0x0 0x100000>; + + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x20000>; + }; + }; + + usb2513 { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&msm_key_volp_n_default>; + + button@0 { + label = "Volume Up"; + linux,code = ; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&msmgpio_leds>, + <&pm8916_gpios_leds>, + <&pm8916_mpps_leds>; + + compatible = "gpio-leds"; + + led@1 { + label = "apq8016-sbc:green:user1"; + gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@2 { + label = "apq8016-sbc:green:user2"; + gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@3 { + label = "apq8016-sbc:green:user3"; + gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@4 { + label = "apq8016-sbc:green:user4"; + gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + panic-indicator; + default-state = "off"; + }; + + led@5 { + label = "apq8016-sbc:yellow:wlan"; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led@6 { + label = "apq8016-sbc:blue:bt"; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp_i2c2 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C0"; +}; + +&blsp_i2c4 { + /* On High speed expansion */ + status = "okay"; + label = "HS-I2C2"; + + adv_bridge: bridge@39 { + status = "okay"; + + compatible = "adi,adv7533"; + reg = <0x39>; + + interrupt-parent = <&msmgpio>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + + adi,dsi-lanes = <4>; + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + + pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&pm8916_l6>; + v1p2-supply = <&pm8916_l6>; + v3p3-supply = <&pm8916_l17>; + + pinctrl-names = "default","sleep"; + pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; + pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp_i2c6 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C1"; +}; + +&blsp_spi3 { + /* On High speed expansion */ + status = "okay"; + label = "HS-SPI1"; +}; + +&blsp_spi5 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-SPI0"; +}; + +&blsp1_uart1 { + status = "okay"; + label = "LS-UART0"; +}; + +&blsp1_uart2 { + status = "okay"; + label = "LS-UART1"; +}; + +&camss { + status = "okay"; + ports { + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&ov5640_ep>; + status = "okay"; + }; + }; + }; +}; + +&cci { + status = "okay"; +}; + +&cci_i2c0 { + camera_rear@3b { + compatible = "ovti,ov5640"; + reg = <0x3b>; + + enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; + reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&camera_rear_default>; + + clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; + clock-names = "xclk"; + clock-frequency = <23880000>; + + vdddo-supply = <&camera_vdddo_1v8>; + vdda-supply = <&camera_vdda_2v8>; + vddd-supply = <&camera_vddd_1v5>; + + /* No camera mezzanine by default */ + status = "disabled"; + + port { + ov5640_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mpss { + status = "okay"; + + firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pronto { + status = "okay"; + + firmware-name = "qcom/apq8016/wcnss.mbn"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + qcom,model = "DB410c"; + qcom,audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + external-dai-link@0 { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + internal-codec-playback-dai-link@0 { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link@0 { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; + + pinctrl-names = "default", "device"; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; +}; + +&wcnss_ctrl { + firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; +}; + +/* Enable CoreSight */ +&cti0 { status = "okay"; }; +&cti1 { status = "okay"; }; +&cti12 { status = "okay"; }; +&cti13 { status = "okay"; }; +&cti14 { status = "okay"; }; +&cti15 { status = "okay"; }; +&debug0 { status = "okay"; }; +&debug1 { status = "okay"; }; +&debug2 { status = "okay"; }; +&debug3 { status = "okay"; }; +&etf { status = "okay"; }; +&etm0 { status = "okay"; }; +&etm1 { status = "okay"; }; +&etm2 { status = "okay"; }; +&etm3 { status = "okay"; }; +&etr { status = "okay"; }; +&funnel0 { status = "okay"; }; +&funnel1 { status = "okay"; }; +&replicator { status = "okay"; }; +&stm { status = "okay"; }; +&tpiu { status = "okay"; }; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1562000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1525000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l5 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l8 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l9 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l10 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l11 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l13 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l14 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + l15 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + regulator-always-on; + }; + + l16 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l18 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; +}; + +/* + * 2mA drive strength is not enough when connecting multiple + * I2C devices with different pull up resistors. + */ +&i2c2_default { + drive-strength = <16>; +}; + +&i2c4_default { + drive-strength = <16>; +}; + +&i2c6_default { + drive-strength = <16>; +}; + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "DragonBoard410c" + * dated monday, august 31, 2015. Page 5 in particular. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + +&msmgpio { + gpio-line-names = + "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ + "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ + "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ + "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ + "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ + "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ + "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ + "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ + "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ + "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ + "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ + "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ + "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ + "[I2C3_SDA]", /* HSEC pin 38 */ + "[I2C3_SCL]", /* HSEC pin 36 */ + "[SPI0_MOSI]", /* LSEC pin 14 */ + "[SPI0_MISO]", /* LSEC pin 10 */ + "[SPI0_CS_N]", /* LSEC pin 12 */ + "[SPI0_CLK]", /* LSEC pin 8 */ + "HDMI_HPD_N", /* GPIO 20 */ + "USR_LED_1_CTRL", + "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ + "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ + "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ + "[CSI0_MCLK]", /* HSEC pin 15 */ + "[CSI1_MCLK]", /* HSEC pin 17 */ + "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ + "[I2C2_SDA]", /* HSEC pin 34 */ + "[I2C2_SCL]", /* HSEC pin 32 */ + "DSI2HDMI_INT_N", + "DSI_SW_SEL_APQ", + "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ + "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ + "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ + "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ + "FORCED_USB_BOOT", + "SD_CARD_DET_N", + "[WCSS_BT_SSBI]", + "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ + "[WCSS_WLAN_DATA_1]", + "[WCSS_WLAN_DATA_0]", + "[WCSS_WLAN_SET]", + "[WCSS_WLAN_CLK]", + "[WCSS_FM_SSBI]", + "[WCSS_FM_SDI]", + "[WCSS_BT_DAT_CTL]", + "[WCSS_BT_DAT_STB]", + "NC", + "NC", /* GPIO 50 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 60 */ + "NC", + "NC", + "[CDC_PDM0_CLK]", + "[CDC_PDM0_SYNC]", + "[CDC_PDM0_TX0]", + "[CDC_PDM0_RX0]", + "[CDC_PDM0_RX1]", + "[CDC_PDM0_RX2]", + "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ + "NC", /* GPIO 70 */ + "NC", + "NC", + "NC", + "NC", /* GPIO 74 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "BOOT_CONFIG_0", /* GPIO 80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "BOOT_CONFIG_5", + "NC", + "NC", + "NC", + "NC", /* GPIO 90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 100 */ + "NC", + "NC", + "NC", + "SSBI_GPS", + "NC", + "NC", + "KEY_VOLP_N", + "NC", + "NC", + "[LS_EXP_MI2S_WS]", /* GPIO 110 */ + "NC", + "NC", + "[LS_EXP_MI2S_SCK]", + "[LS_EXP_MI2S_DATA0]", + "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ + "NC", + "[DSI2HDMI_MI2S_WS]", + "[DSI2HDMI_MI2S_SCK]", + "[DSI2HDMI_MI2S_DATA0]", + "USR_LED_2_CTRL", /* GPIO 120 */ + "SB_HS_ID"; + + msmgpio_leds: msmgpio-leds { + pins = "gpio21", "gpio120"; + function = "gpio"; + + output-low; + }; + + usb_id_default: usb-id-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; + }; + + adv7533_int_active: adv533-int-active { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + adv7533_int_suspend: adv7533-int-suspend { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + adv7533_switch_active: adv7533-switch-active { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + adv7533_switch_suspend: adv7533-switch-suspend { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + msm_key_volp_n_default: msm-key-volp-n-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; + }; +}; + +&pm8916_gpios { + gpio-line-names = + "USR_LED_3_CTRL", + "USR_LED_4_CTRL", + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM"; + + usb_hub_reset_pm: usb-hub-reset-pm { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + input-disable; + output-high; + }; + + usb_hub_reset_pm_device: usb-hub-reset-pm-device { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; + }; + + usb_sw_sel_pm: usb-sw-sel-pm { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = ; + input-disable; + output-high; + }; + + usb_sw_sel_pm_device: usb-sw-sel-pm-device { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = ; + input-disable; + output-low; + }; + + pm8916_gpios_leds: pm8916-gpios-leds { + pins = "gpio1", "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; + }; +}; + +&pm8916_mpps { + gpio-line-names = + "VDD_PX_BIAS", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f>; + + ls_exp_gpio_f: pm8916-mpp4-state { + pins = "mpp4"; + function = "digital"; + + output-low; + power-source = ; // 1.8V + }; + + pm8916_mpps_leds: pm8916-mpps-state { + pins = "mpp2", "mpp3"; + function = "digital"; + + output-low; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi deleted file mode 100644 index f8d8f3e..0000000 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ /dev/null @@ -1,826 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8916-pm8916.dtsi" -#include -#include -#include -#include -#include - -/ { - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp1_uart1; - usid0 = &pm8916_0; - i2c0 = &blsp_i2c2; - i2c1 = &blsp_i2c6; - i2c3 = &blsp_i2c4; - spi0 = &blsp_spi5; - spi1 = &blsp_spi3; - }; - - chosen { - stdout-path = "serial0"; - }; - - camera_vdddo_1v8: camera-vdddo-1v8 { - compatible = "regulator-fixed"; - regulator-name = "camera_vdddo"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - camera_vdda_2v8: camera-vdda-2v8 { - compatible = "regulator-fixed"; - regulator-name = "camera_vdda"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - camera_vddd_1v5: camera-vddd-1v5 { - compatible = "regulator-fixed"; - regulator-name = "camera_vddd"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - reserved-memory { - ramoops@bff00000 { - compatible = "ramoops"; - reg = <0x0 0xbff00000 0x0 0x100000>; - - record-size = <0x20000>; - console-size = <0x20000>; - ftrace-size = <0x20000>; - }; - }; - - usb2513 { - compatible = "smsc,usb3503"; - reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; - initial-mode = <1>; - }; - - usb_id: usb-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_id_default>; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7533_out>; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&msm_key_volp_n_default>; - - button@0 { - label = "Volume Up"; - linux,code = ; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&msmgpio_leds>, - <&pm8916_gpios_leds>, - <&pm8916_mpps_leds>; - - compatible = "gpio-leds"; - - led@1 { - label = "apq8016-sbc:green:user1"; - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led@2 { - label = "apq8016-sbc:green:user2"; - gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led@3 { - label = "apq8016-sbc:green:user3"; - gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - led@4 { - label = "apq8016-sbc:green:user4"; - gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - panic-indicator; - default-state = "off"; - }; - - led@5 { - label = "apq8016-sbc:yellow:wlan"; - gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - led@6 { - label = "apq8016-sbc:blue:bt"; - gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bluetooth-power"; - default-state = "off"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp_i2c2 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C0"; -}; - -&blsp_i2c4 { - /* On High speed expansion */ - status = "okay"; - label = "HS-I2C2"; - - adv_bridge: bridge@39 { - status = "okay"; - - compatible = "adi,adv7533"; - reg = <0x39>; - - interrupt-parent = <&msmgpio>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - - adi,dsi-lanes = <4>; - clocks = <&rpmcc RPM_SMD_BB_CLK2>; - clock-names = "cec"; - - pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; - - avdd-supply = <&pm8916_l6>; - v1p2-supply = <&pm8916_l6>; - v3p3-supply = <&pm8916_l17>; - - pinctrl-names = "default","sleep"; - pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; - pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; - #sound-dai-cells = <1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - adv7533_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; -}; - -&blsp_i2c6 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C1"; -}; - -&blsp_spi3 { - /* On High speed expansion */ - status = "okay"; - label = "HS-SPI1"; -}; - -&blsp_spi5 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-SPI0"; -}; - -&blsp1_uart1 { - status = "okay"; - label = "LS-UART0"; -}; - -&blsp1_uart2 { - status = "okay"; - label = "LS-UART1"; -}; - -&camss { - status = "okay"; - ports { - port@0 { - reg = <0>; - csiphy0_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&ov5640_ep>; - status = "okay"; - }; - }; - }; -}; - -&cci { - status = "okay"; -}; - -&cci_i2c0 { - camera_rear@3b { - compatible = "ovti,ov5640"; - reg = <0x3b>; - - enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; - reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_rear_default>; - - clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; - clock-names = "xclk"; - clock-frequency = <23880000>; - - vdddo-supply = <&camera_vdddo_1v8>; - vdda-supply = <&camera_vdda_2v8>; - vddd-supply = <&camera_vddd_1v5>; - - /* No camera mezzanine by default */ - status = "disabled"; - - port { - ov5640_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; -}; - -&dsi0_out { - data-lanes = <0 1 2 3>; - remote-endpoint = <&adv7533_in>; -}; - -&lpass { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&pm8916_resin { - status = "okay"; - linux,code = ; -}; - -&pronto { - status = "okay"; -}; - -&sdhc_1 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; -}; - -&sound { - status = "okay"; - - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; - pinctrl-names = "default", "sleep"; - qcom,model = "DB410c"; - qcom,audio-routing = - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS External1"; - - external-dai-link@0 { - link-name = "ADV7533"; - cpu { - sound-dai = <&lpass MI2S_QUATERNARY>; - }; - codec { - sound-dai = <&adv_bridge 0>; - }; - }; - - internal-codec-playback-dai-link@0 { - link-name = "WCD"; - cpu { - sound-dai = <&lpass MI2S_PRIMARY>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; - - internal-codec-capture-dai-link@0 { - link-name = "WCD-Capture"; - cpu { - sound-dai = <&lpass MI2S_TERTIARY>; - }; - codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; - }; - }; -}; - -&usb { - status = "okay"; - extcon = <&usb_id>, <&usb_id>; - - pinctrl-names = "default", "device"; - pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; - pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; -}; - -&usb_hs_phy { - extcon = <&usb_id>; -}; - -&wcd_codec { - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; -}; - -/* Enable CoreSight */ -&cti0 { status = "okay"; }; -&cti1 { status = "okay"; }; -&cti12 { status = "okay"; }; -&cti13 { status = "okay"; }; -&cti14 { status = "okay"; }; -&cti15 { status = "okay"; }; -&debug0 { status = "okay"; }; -&debug1 { status = "okay"; }; -&debug2 { status = "okay"; }; -&debug3 { status = "okay"; }; -&etf { status = "okay"; }; -&etm0 { status = "okay"; }; -&etm1 { status = "okay"; }; -&etm2 { status = "okay"; }; -&etm3 { status = "okay"; }; -&etr { status = "okay"; }; -&funnel0 { status = "okay"; }; -&funnel1 { status = "okay"; }; -&replicator { status = "okay"; }; -&stm { status = "okay"; }; -&tpiu { status = "okay"; }; - -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1562000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l5 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l8 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l9 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l10 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l11 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l13 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l14 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - l15 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-always-on; - }; - - l16 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l17 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l18 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; -}; - -/* - * 2mA drive strength is not enough when connecting multiple - * I2C devices with different pull up resistors. - */ -&i2c2_default { - drive-strength = <16>; -}; - -&i2c4_default { - drive-strength = <16>; -}; - -&i2c6_default { - drive-strength = <16>; -}; - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * HSEC = High Speed External Connector - * - * Line names are taken from the schematic "DragonBoard410c" - * dated monday, august 31, 2015. Page 5 in particular. - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - -&msmgpio { - gpio-line-names = - "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ - "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ - "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ - "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ - "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ - "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ - "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ - "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ - "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ - "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ - "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ - "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ - "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ - "[I2C3_SDA]", /* HSEC pin 38 */ - "[I2C3_SCL]", /* HSEC pin 36 */ - "[SPI0_MOSI]", /* LSEC pin 14 */ - "[SPI0_MISO]", /* LSEC pin 10 */ - "[SPI0_CS_N]", /* LSEC pin 12 */ - "[SPI0_CLK]", /* LSEC pin 8 */ - "HDMI_HPD_N", /* GPIO 20 */ - "USR_LED_1_CTRL", - "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ - "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ - "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ - "[CSI0_MCLK]", /* HSEC pin 15 */ - "[CSI1_MCLK]", /* HSEC pin 17 */ - "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ - "[I2C2_SDA]", /* HSEC pin 34 */ - "[I2C2_SCL]", /* HSEC pin 32 */ - "DSI2HDMI_INT_N", - "DSI_SW_SEL_APQ", - "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ - "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ - "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ - "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ - "FORCED_USB_BOOT", - "SD_CARD_DET_N", - "[WCSS_BT_SSBI]", - "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ - "[WCSS_WLAN_DATA_1]", - "[WCSS_WLAN_DATA_0]", - "[WCSS_WLAN_SET]", - "[WCSS_WLAN_CLK]", - "[WCSS_FM_SSBI]", - "[WCSS_FM_SDI]", - "[WCSS_BT_DAT_CTL]", - "[WCSS_BT_DAT_STB]", - "NC", - "NC", /* GPIO 50 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 60 */ - "NC", - "NC", - "[CDC_PDM0_CLK]", - "[CDC_PDM0_SYNC]", - "[CDC_PDM0_TX0]", - "[CDC_PDM0_RX0]", - "[CDC_PDM0_RX1]", - "[CDC_PDM0_RX2]", - "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ - "NC", /* GPIO 70 */ - "NC", - "NC", - "NC", - "NC", /* GPIO 74 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "BOOT_CONFIG_0", /* GPIO 80 */ - "BOOT_CONFIG_1", - "BOOT_CONFIG_2", - "BOOT_CONFIG_3", - "NC", - "NC", - "BOOT_CONFIG_5", - "NC", - "NC", - "NC", - "NC", /* GPIO 90 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 100 */ - "NC", - "NC", - "NC", - "SSBI_GPS", - "NC", - "NC", - "KEY_VOLP_N", - "NC", - "NC", - "[LS_EXP_MI2S_WS]", /* GPIO 110 */ - "NC", - "NC", - "[LS_EXP_MI2S_SCK]", - "[LS_EXP_MI2S_DATA0]", - "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ - "NC", - "[DSI2HDMI_MI2S_WS]", - "[DSI2HDMI_MI2S_SCK]", - "[DSI2HDMI_MI2S_DATA0]", - "USR_LED_2_CTRL", /* GPIO 120 */ - "SB_HS_ID"; - - msmgpio_leds: msmgpio-leds { - pins = "gpio21", "gpio120"; - function = "gpio"; - - output-low; - }; - - usb_id_default: usb-id-default { - pins = "gpio121"; - function = "gpio"; - - drive-strength = <8>; - input-enable; - bias-pull-up; - }; - - adv7533_int_active: adv533-int-active { - pins = "gpio31"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - adv7533_int_suspend: adv7533-int-suspend { - pins = "gpio31"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - adv7533_switch_active: adv7533-switch-active { - pins = "gpio32"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - adv7533_switch_suspend: adv7533-switch-suspend { - pins = "gpio32"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - msm_key_volp_n_default: msm-key-volp-n-default { - pins = "gpio107"; - function = "gpio"; - - drive-strength = <8>; - input-enable; - bias-pull-up; - }; -}; - -&pm8916_gpios { - gpio-line-names = - "USR_LED_3_CTRL", - "USR_LED_4_CTRL", - "USB_HUB_RESET_N_PM", - "USB_SW_SEL_PM"; - - usb_hub_reset_pm: usb-hub-reset-pm { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - - input-disable; - output-high; - }; - - usb_hub_reset_pm_device: usb-hub-reset-pm-device { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - - output-low; - }; - - usb_sw_sel_pm: usb-sw-sel-pm { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - - power-source = ; - input-disable; - output-high; - }; - - usb_sw_sel_pm_device: usb-sw-sel-pm-device { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - - power-source = ; - input-disable; - output-low; - }; - - pm8916_gpios_leds: pm8916-gpios-leds { - pins = "gpio1", "gpio2"; - function = PMIC_GPIO_FUNC_NORMAL; - - output-low; - }; -}; - -&pm8916_mpps { - gpio-line-names = - "VDD_PX_BIAS", - "WLAN_LED_CTRL", - "BT_LED_CTRL", - "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f>; - - ls_exp_gpio_f: pm8916-mpp4 { - pins = "mpp4"; - function = "digital"; - - output-low; - power-source = ; // 1.8V - }; - - pm8916_mpps_leds: pm8916-mpps-leds { - pins = "mpp2", "mpp3"; - function = "digital"; - - output-low; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts index a8dffc8..314d2dc 100644 --- a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts +++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts @@ -11,6 +11,7 @@ / { model = "Sony Xperia Z4 Tablet (Wi-Fi)"; compatible = "sony,karin_windy", "qcom,apq8094"; + chassis-type = "tablet"; /* * This model uses the APQ variant of MSM8994 (APQ8094). diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 757afa2..d01a512 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -5,9 +5,1077 @@ /dts-v1/; -#include "apq8096-db820c.dtsi" +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include +#include +#include + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * P HSEC = Primary High Speed External Connector + * S HSEC = Secondary High Speed External Connector + * J14 = Camera Connector + * TP = Test Points + * + * Line names are taken from the schematic "DragonBoard 820c", + * drawing no: LM25-P2751-1 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ / { model = "Qualcomm Technologies, Inc. DB820c"; compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; + + aliases { + serial0 = &blsp2_uart2; + serial1 = &blsp2_uart3; + serial2 = &blsp1_uart2; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp2_i2c1; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + compatible = "simple-bus"; + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + button@0 { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&blsp1_spi1 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&blsp1_uart2 { + label = "BT-UART"; + status = "okay"; + + bluetooth { + compatible = "qcom,qca6174-bt"; + + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + + clocks = <&divclk4>; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c1 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; + +&blsp2_i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&blsp2_spi6 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&blsp2_uart2 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; +}; + +&blsp2_uart3 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart3_4pins_default>; + pinctrl-1 = <&blsp2_uart3_4pins_sleep>; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&gpu { + status = "okay"; +}; + +&hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + +&hsusb_phy1 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&hsusb_phy2 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pm8994_resin { + status = "okay"; + linux,code = ; +}; + +&tlmm { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + }; + + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + hdmi_hpd_active: hdmi_hpd_active { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <16>; + }; + }; + + hdmi_hpd_suspend: hdmi_hpd_suspend { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <2>; + }; + }; + + hdmi_ddc_active: hdmi_ddc_active { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + hdmi_ddc_suspend: hdmi_ddc_suspend { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie2 { + status = "okay"; + perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; + + ls_exp_gpio_f: pm8994_gpio5 { + pinconf { + pins = "gpio5"; + output-low; + power-source = <2>; // PM8994_GPIO_S4, 1.8V + }; + }; + + bt_en_gpios: bt_en_gpios { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = ; // 1.8V + qcom,drive-strength = ; + bias-pull-down; + }; + }; + + wlan_en_gpios: wlan_en_gpios { + pinconf { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = ; // 1.8V + qcom,drive-strength = ; + bias-pull-down; + }; + }; + + audio_mclk: clk_div1 { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = ; // 1.8V + }; + }; + + volume_up_gpio: pm8996_gpio2 { + pinconf { + pins = "gpio2"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = ; + power-source = ; // 1.8V + }; + }; + + divclk4_pin_a: divclk4 { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + + bias-disable; + power-source = ; + }; + }; + + usb3_vbus_det_gpio: pm8996_gpio22 { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = ; + power-source = ; // 1.8V + }; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + + usb2_vbus_det_gpio: pmi8996_gpio6 { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = ; + power-source = ; // 1.8V + }; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2@1700 { + reg = <0x1700 0x100>; + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + }; +}; + +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "DB820c"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI"; + cpu { + sound-dai = <&q6afedai HDMI_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&hdmi 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vddp-ref-clk-supply = <&vreg_l25a_1p2>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&usb2 { + status = "okay"; + extcon = <&usb2_id>; + + dwc3@7600000 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; + }; +}; + +&usb3 { + status = "okay"; + extcon = <&usb3_id>; + + dwc3@6a00000 { + extcon = <&usb3_id>; + dr_mode = "otg"; + }; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi deleted file mode 100644 index 51e1709..0000000 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ /dev/null @@ -1,1105 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. - */ - -#include "msm8996.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" -#include -#include -#include -#include -#include - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * P HSEC = Primary High Speed External Connector - * S HSEC = Secondary High Speed External Connector - * J14 = Camera Connector - * TP = Test Points - * - * Line names are taken from the schematic "DragonBoard 820c", - * drawing no: LM25-P2751-1 - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - -/ { - aliases { - serial0 = &blsp2_uart2; - serial1 = &blsp2_uart3; - serial2 = &blsp1_uart2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp2_i2c1; - i2c2 = &blsp2_i2c1; - spi0 = &blsp1_spi1; - spi1 = &blsp2_spi6; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - clocks { - compatible = "simple-bus"; - divclk4: divclk4 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "divclk4"; - - pinctrl-names = "default"; - pinctrl-0 = <&divclk4_pin_a>; - }; - - div1_mclk: divclk1 { - compatible = "gpio-gate-clock"; - pinctrl-0 = <&audio_mclk>; - pinctrl-names = "default"; - clocks = <&rpmcc RPM_SMD_DIV_CLK1>; - #clock-cells = <0>; - enable-gpios = <&pm8994_gpios 15 0>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&volume_up_gpio>; - - button@0 { - label = "Volume Up"; - linux,code = ; - gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; - }; - }; - - usb2_id: usb2-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_det_gpio>; - }; - - usb3_id: usb3-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_det_gpio>; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - wlan_en: wlan-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&pm8994_gpios 8 0>; - - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; -}; - -&blsp1_i2c3 { - /* On Low speed expansion */ - label = "LS-I2C0"; - status = "okay"; -}; - -&blsp1_spi1 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; -}; - -&blsp1_uart2 { - label = "BT-UART"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - - bluetooth { - compatible = "qcom,qca6174-bt"; - - /* bt_disable_n gpio */ - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - - clocks = <&divclk4>; - }; -}; - -&adsp_pil { - status = "okay"; -}; - -&blsp2_i2c1 { - /* On High speed expansion */ - label = "HS-I2C2"; - status = "okay"; -}; - -&blsp2_i2c1 { - /* On Low speed expansion */ - label = "LS-I2C1"; - status = "okay"; -}; - -&blsp2_spi6 { - /* On High speed expansion */ - label = "HS-SPI1"; - status = "okay"; -}; - -&blsp2_uart2 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_2pins_default>; - pinctrl-1 = <&blsp2_uart2_2pins_sleep>; -}; - -&blsp2_uart3 { - label = "LS-UART0"; - status = "disabled"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart3_4pins_default>; - pinctrl-1 = <&blsp2_uart3_4pins_sleep>; -}; - -&camss { - vdda-supply = <&vreg_l2a_1p25>; -}; - -&gpu { - status = "okay"; -}; - -&hdmi { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - - core-vdda-supply = <&vreg_l12a_1p8>; - core-vcc-supply = <&vreg_s4a_1p8>; -}; - -&hdmi_phy { - status = "okay"; - - vddio-supply = <&vreg_l12a_1p8>; - vcca-supply = <&vreg_l28a_0p925>; - #phy-cells = <0>; -}; - -&hsusb_phy1 { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&hsusb_phy2 { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&mdp { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mmcc { - vdd-gfx-supply = <&vdd_gfx>; -}; - -&pm8994_resin { - status = "okay"; - linux,code = ; -}; - -&tlmm { - gpio-line-names = - "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ - "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ - "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ - "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ - "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ - "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ - "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ - "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ - "TP93", /* GPIO_9 */ - "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ - "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ - "NC", /* GPIO_12 */ - "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ - "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ - "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ - "TP99", /* GPIO_16 */ - "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ - "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ - "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ - "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ - "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ - "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ - "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ - "GPIO-D", /* GPIO_24, LSEC pin 26 */ - "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ - "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ - "BLSP6_I2C_SDA", /* GPIO_27 */ - "BLSP6_I2C_SCL", /* GPIO_28 */ - "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ - "GPIO30", /* GPIO_30, S HSEC pin 4 */ - "HDMI_CEC", /* GPIO_31 */ - "HDMI_DDC_CLOCK", /* GPIO_32 */ - "HDMI_DDC_DATA", /* GPIO_33 */ - "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ - "PCIE0_RST_N", /* GPIO_35 */ - "PCIE0_CLKREQ_N", /* GPIO_36 */ - "PCIE0_WAKE", /* GPIO_37 */ - "SD_CARD_DET_N", /* GPIO_38 */ - "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ - "W_DISABLE_N", /* GPIO_40 */ - "[BLSP9_UART_TX]", /* GPIO_41 */ - "[BLSP9_UART_RX]", /* GPIO_42 */ - "[BLSP2_UART_CTS_N]", /* GPIO_43 */ - "[BLSP2_UART_RFR_N]", /* GPIO_44 */ - "[BLSP3_UART_TX]", /* GPIO_45 */ - "[BLSP3_UART_RX]", /* GPIO_46 */ - "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ - "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ - "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ - "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ - "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ - "[CODEC_INT1_N]", /* GPIO_53 */ - "[CODEC_INT2_N]", /* GPIO_54 */ - "[BLSP7_I2C_SDA]", /* GPIO_55 */ - "[BLSP7_I2C_SCL]", /* GPIO_56 */ - "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ - "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ - "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ - "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ - "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ - "GPIO-E", /* GPIO_62, LSEC pin 27 */ - "TP87", /* GPIO_63 */ - "[CODEC_RST_N]", /* GPIO_64 */ - "[PCM1_CLK]", /* GPIO_65 */ - "[PCM1_SYNC]", /* GPIO_66 */ - "[PCM1_DIN]", /* GPIO_67 */ - "[PCM1_DOUT]", /* GPIO_68 */ - "AUDIO_REF_CLK", /* GPIO_69 */ - "SLIMBUS_CLK", /* GPIO_70 */ - "SLIMBUS_DATA0", /* GPIO_71 */ - "SLIMBUS_DATA1", /* GPIO_72 */ - "NC", /* GPIO_73 */ - "NC", /* GPIO_74 */ - "NC", /* GPIO_75 */ - "NC", /* GPIO_76 */ - "TP94", /* GPIO_77 */ - "NC", /* GPIO_78 */ - "TP95", /* GPIO_79 */ - "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ - "TP88", /* GPIO_81 */ - "TP89", /* GPIO_82 */ - "TP90", /* GPIO_83 */ - "TP91", /* GPIO_84 */ - "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ - "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ - "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ - "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ - "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ - "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ - "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ - "NC", /* GPIO_92 */ - "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ - "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ - "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ - "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ - "NC", /* GPIO_97 */ - "CAM1_STANDBY_N", /* GPIO_98 */ - "NC", /* GPIO_99 */ - "NC", /* GPIO_100 */ - "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ - "BOOT_CONFIG1", /* GPIO_102 */ - "USB_HUB_RESET", /* GPIO_103 */ - "CAM1_RST_N", /* GPIO_104 */ - "NC", /* GPIO_105 */ - "NC", /* GPIO_106 */ - "NC", /* GPIO_107 */ - "NC", /* GPIO_108 */ - "NC", /* GPIO_109 */ - "NC", /* GPIO_110 */ - "NC", /* GPIO_111 */ - "NC", /* GPIO_112 */ - "PMI8994_BUA", /* GPIO_113 */ - "PCIE2_RST_N", /* GPIO_114 */ - "PCIE2_CLKREQ_N", /* GPIO_115 */ - "PCIE2_WAKE", /* GPIO_116 */ - "SSC_IRQ_0", /* GPIO_117 */ - "SSC_IRQ_1", /* GPIO_118 */ - "SSC_IRQ_2", /* GPIO_119 */ - "NC", /* GPIO_120 */ - "GPIO121", /* GPIO_121, S HSEC pin 2 */ - "NC", /* GPIO_122 */ - "SSC_IRQ_6", /* GPIO_123 */ - "SSC_IRQ_7", /* GPIO_124 */ - "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ - "BOOT_CONFIG5", /* GPIO_126 */ - "NC", /* GPIO_127 */ - "NC", /* GPIO_128 */ - "BOOT_CONFIG7", /* GPIO_129 */ - "PCIE1_RST_N", /* GPIO_130 */ - "PCIE1_CLKREQ_N", /* GPIO_131 */ - "PCIE1_WAKE", /* GPIO_132 */ - "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ - "NC", /* GPIO_134 */ - "NC", /* GPIO_135 */ - "BOOT_CONFIG8", /* GPIO_136 */ - "NC", /* GPIO_137 */ - "NC", /* GPIO_138 */ - "GPS_SSBI2", /* GPIO_139 */ - "GPS_SSBI1", /* GPIO_140 */ - "NC", /* GPIO_141 */ - "NC", /* GPIO_142 */ - "NC", /* GPIO_143 */ - "BOOT_CONFIG6", /* GPIO_144 */ - "NC", /* GPIO_145 */ - "NC", /* GPIO_146 */ - "NC", /* GPIO_147 */ - "NC", /* GPIO_148 */ - "NC"; /* GPIO_149 */ - - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; - }; - - blsp1_uart2_default: blsp1_uart2_default { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "blsp_uart2"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart2_sleep: blsp1_uart2_sleep { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "gpio"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - }; - - hdmi_hpd_active: hdmi_hpd_active { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <16>; - }; - }; - - hdmi_hpd_suspend: hdmi_hpd_suspend { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <2>; - }; - }; - - hdmi_ddc_active: hdmi_ddc_active { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - hdmi_ddc_suspend: hdmi_ddc_suspend { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-down; - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&wlan_en>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie1 { - status = "okay"; - perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie2 { - status = "okay"; - perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; -}; - -&pm8994_gpios { - gpio-line-names = - "NC", - "KEY_VOLP_N", - "NC", - "BL1_PWM", - "GPIO-F", /* BL0_PWM, LSEC pin 28 */ - "BL1_EN", - "NC", - "WLAN_EN", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "DIVCLK1", - "DIVCLK2", - "DIVCLK3", - "DIVCLK4", - "BT_EN", - "PMIC_SLB", - "PMIC_BUA", - "USB_VBUS_DET"; - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - - ls_exp_gpio_f: pm8994_gpio5 { - pinconf { - pins = "gpio5"; - output-low; - power-source = <2>; // PM8994_GPIO_S4, 1.8V - }; - }; - - bt_en_gpios: bt_en_gpios { - pinconf { - pins = "gpio19"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = ; // 1.8V - qcom,drive-strength = ; - bias-pull-down; - }; - }; - - wlan_en_gpios: wlan_en_gpios { - pinconf { - pins = "gpio8"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = ; // 1.8V - qcom,drive-strength = ; - bias-pull-down; - }; - }; - - audio_mclk: clk_div1 { - pinconf { - pins = "gpio15"; - function = "func1"; - power-source = ; // 1.8V - }; - }; - - volume_up_gpio: pm8996_gpio2 { - pinconf { - pins = "gpio2"; - function = "normal"; - input-enable; - drive-push-pull; - bias-pull-up; - qcom,drive-strength = ; - power-source = ; // 1.8V - }; - }; - - divclk4_pin_a: divclk4 { - pinconf { - pins = "gpio18"; - function = PMIC_GPIO_FUNC_FUNC2; - - bias-disable; - power-source = ; - }; - }; - - usb3_vbus_det_gpio: pm8996_gpio22 { - pinconf { - pins = "gpio22"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = ; - power-source = ; // 1.8V - }; - }; -}; - -&pm8994_mpps { - gpio-line-names = - "VDDPX_BIAS", - "WIFI_LED", - "NC", - "BT_LED", - "PM_MPP05", - "PM_MPP06", - "PM_MPP07", - "NC"; -}; - -&pm8994_spmi_regulators { - qcom,saw-reg = <&saw3>; - s9 { - qcom,saw-slave; - }; - s10 { - qcom,saw-slave; - }; - s11 { - qcom,saw-leader; - regulator-always-on; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&pmi8994_gpios { - gpio-line-names = - "NC", - "SPKR_AMP_EN1", - "SPKR_AMP_EN2", - "TP61", - "NC", - "USB2_VBUS_DET", - "NC", - "NC", - "NC", - "NC"; - - usb2_vbus_det_gpio: pmi8996_gpio6 { - pinconf { - pins = "gpio6"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = ; - power-source = ; // 1.8V - }; - }; -}; - -&pmi8994_spmi_regulators { - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; - regulator-name = "VDD_GFX"; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&rpm_requests { - pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_s6-supply = <&vph_pwr>; - vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; - vdd_l1-supply = <&vreg_s1b_1p025>; - vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; - vdd_l3_l11-supply = <&vreg_s3a_1p3>; - vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; - vdd_l5_l7-supply = <&vreg_s5a_2p15>; - vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; - vdd_l8_l16_l30-supply = <&vph_pwr>; - vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; - vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; - vdd_l14_l15-supply = <&vreg_s5a_2p15>; - vdd_l17_l29-supply = <&vph_pwr_bbyp>; - vdd_l20_l21-supply = <&vph_pwr_bbyp>; - vdd_l25-supply = <&vreg_s3a_1p3>; - vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p3: s3 { - regulator-name = "vreg_s3a_1p3"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - vreg_s4a_1p8: s4 { - regulator-name = "vreg_s4a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - vreg_s5a_2p15: s5 { - regulator-name = "vreg_s5a_2p15"; - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - vreg_s7a_1p0: s7 { - regulator-name = "vreg_s7a_1p0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - vreg_l1a_1p0: l1 { - regulator-name = "vreg_l1a_1p0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l2a_1p25: l2 { - regulator-name = "vreg_l2a_1p25"; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - vreg_l3a_0p875: l3 { - regulator-name = "vreg_l3a_0p875"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - }; - vreg_l4a_1p225: l4 { - regulator-name = "vreg_l4a_1p225"; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - vreg_l6a_1p2: l6 { - regulator-name = "vreg_l6a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l8a_1p8: l8 { - regulator-name = "vreg_l8a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l9a_1p8: l9 { - regulator-name = "vreg_l9a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l10a_1p8: l10 { - regulator-name = "vreg_l10a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l11a_1p15: l11 { - regulator-name = "vreg_l11a_1p15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - vreg_l12a_1p8: l12 { - regulator-name = "vreg_l12a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l13a_2p95: l13 { - regulator-name = "vreg_l13a_2p95"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - vreg_l14a_1p8: l14 { - regulator-name = "vreg_l14a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l15a_1p8: l15 { - regulator-name = "vreg_l15a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l16a_2p7: l16 { - regulator-name = "vreg_l16a_2p7"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - vreg_l17a_2p8: l17 { - regulator-name = "vreg_l17a_2p8"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - vreg_l18a_2p85: l18 { - regulator-name = "vreg_l18a_2p85"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2900000>; - }; - vreg_l19a_2p8: l19 { - regulator-name = "vreg_l19a_2p8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - vreg_l20a_2p95: l20 { - regulator-name = "vreg_l20a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - vreg_l21a_2p95: l21 { - regulator-name = "vreg_l21a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - vreg_l22a_3p0: l22 { - regulator-name = "vreg_l22a_3p0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - vreg_l23a_2p8: l23 { - regulator-name = "vreg_l23a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l24a_3p075: l24 { - regulator-name = "vreg_l24a_3p075"; - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - vreg_l25a_1p2: l25 { - regulator-name = "vreg_l25a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - vreg_l26a_0p8: l27 { - regulator-name = "vreg_l26a_0p8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l28a_0p925: l28 { - regulator-name = "vreg_l28a_0p925"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-allow-set-load; - }; - vreg_l29a_2p8: l29 { - regulator-name = "vreg_l29a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l30a_1p8: l30 { - regulator-name = "vreg_l30a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l32a_1p8: l32 { - regulator-name = "vreg_l32a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-name = "vreg_lvs1a_1p8"; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-name = "vreg_lvs2a_1p8"; - }; - }; - - pmi8994-regulators { - compatible = "qcom,rpm-pmi8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_bst_byp-supply = <&vph_pwr>; - - vph_pwr_bbyp: boost-bypass { - regulator-name = "vph_pwr_bbyp"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vreg_s1b_1p025: s1 { - regulator-name = "vreg_s1b_1p025"; - regulator-min-microvolt = <1025000>; - regulator-max-microvolt = <1025000>; - }; - }; -}; - -&sdhc2 { - /* External SD card */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; - cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - status = "okay"; -}; - -&q6asmdai { - dai@0 { - reg = <0>; - }; - - dai@1 { - reg = <1>; - }; - - dai@2 { - reg = <2>; - }; -}; - -&sound { - compatible = "qcom,apq8096-sndcard"; - model = "DB820c"; - audio-routing = "RX_BIAS", "MCLK", - "MM_DL1", "MultiMedia1 Playback", - "MM_DL2", "MultiMedia2 Playback", - "MultiMedia3 Capture", "MM_UL3"; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - mm2-dai-link { - link-name = "MultiMedia2"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; - }; - }; - - mm3-dai-link { - link-name = "MultiMedia3"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; - }; - }; - - hdmi-dai-link { - link-name = "HDMI"; - cpu { - sound-dai = <&q6afedai HDMI_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&hdmi 0>; - }; - }; - - slim-dai-link { - link-name = "SLIM Playback"; - cpu { - sound-dai = <&q6afedai SLIMBUS_6_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 6>; - }; - }; - - slimcap-dai-link { - link-name = "SLIM Capture"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_TX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 1>; - }; - }; -}; - -&ufsphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; -}; - -&ufshc { - status = "okay"; - - vcc-supply = <&vreg_l20a_2p95>; - vccq-supply = <&vreg_l25a_1p2>; - vccq2-supply = <&vreg_s4a_1p8>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; -}; - -&usb2 { - status = "okay"; - extcon = <&usb2_id>; - - dwc3@7600000 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; - }; -}; - -&usb3 { - status = "okay"; - extcon = <&usb3_id>; - - dwc3@6a00000 { - extcon = <&usb3_id>; - dr_mode = "otg"; - }; -}; - -&usb3phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - -}; - -&venus { - status = "okay"; -}; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index a57c600..567b331 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -395,9 +395,6 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; }; &venus { diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index d2fe58e..933b561 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -200,8 +200,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <1>; - qcom,controlled-remotely = <1>; - qcom,config-pipe-trust-reg = <0>; + qcom,controlled-remotely; }; crypto: crypto@73a000 { @@ -347,9 +346,8 @@ compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07984000 0x0 0x1a000>; interrupts = ; - clocks = <&gcc GCC_QPIC_CLK>, - <&gcc GCC_QPIC_AHB_CLK>; - clock-names = "iface_clk", "bam_clk"; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; status = "disabled"; @@ -401,7 +399,7 @@ reset-names = "phy", "common"; - pcie_phy0: lane@84200 { + pcie_phy0: phy@84200 { reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */ <0x0 0x84400 0x0 0x200>, /* Serdes Rx */ <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */ @@ -671,6 +669,89 @@ }; }; + ssphy_0: ssphy@78000 { + compatible = "qcom,ipq6018-qmp-usb3-phy"; + reg = <0x0 0x78000 0x0 0x1C4>; + #address-cells = <2>; + #size-cells = <2>; + #clock-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb0_ssphy: lane@78200 { + reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ + <0x0 0x00078400 0x0 0x200>, /* Rx */ + <0x0 0x00078800 0x0 0x1F8>, /* PCS */ + <0x0 0x00078600 0x0 0x044>; /* PCS misc */ + #phy-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + }; + }; + + qusb_phy_0: qusb@79000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x079000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; + }; + + usb3: usb3@8A00000 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x8AF8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "sys_noc_axi", + "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <20000000>; + + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + + dwc_0: usb@8A00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x8A00000 0x0 0xcd00>; + interrupts = ; + phys = <&qusb_phy_0>, <&usb0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,ref-clock-period-ns = <0x32>; + dr_mode = "host"; + }; + }; }; wcss: wcss-smp2p { diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index cc08dc4..b5e1eaa 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -24,6 +24,8 @@ device_type = "memory"; reg = <0x0 0x40000000 0x0 0x20000000>; }; + + vreg_dummy: regulator-dummy { }; }; &blsp1_i2c2 { @@ -97,10 +99,14 @@ &ssphy_0 { status = "okay"; + vdda-phy-supply = <&vreg_dummy>; + vdda-pll-supply = <&vreg_dummy>; }; &ssphy_1 { status = "okay"; + vdda-phy-supply = <&vreg_dummy>; + vdda-pll-supply = <&vreg_dummy>; }; &usb_0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index db33300..6c6a0f8 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -91,7 +91,6 @@ ssphy_1: phy@58000 { compatible = "qcom,ipq8074-qmp-usb3-phy"; reg = <0x00058000 0x1c4>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -106,12 +105,13 @@ reset-names = "phy","common"; status = "disabled"; - usb1_ssphy: lane@58200 { + usb1_ssphy: phy@58200 { reg = <0x00058200 0x130>, /* Tx */ <0x00058400 0x200>, /* Rx */ <0x00058800 0x1f8>, /* PCS */ <0x00058600 0x044>; /* PCS misc*/ #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB1_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb1_pipe_clk_src"; @@ -134,7 +134,6 @@ ssphy_0: phy@78000 { compatible = "qcom,ipq8074-qmp-usb3-phy"; reg = <0x00078000 0x1c4>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -149,12 +148,13 @@ reset-names = "phy","common"; status = "disabled"; - usb0_ssphy: lane@78200 { + usb0_ssphy: phy@78200 { reg = <0x00078200 0x130>, /* Tx */ <0x00078400 0x200>, /* Rx */ <0x00078800 0x1f8>, /* PCS */ <0x00078600 0x044>; /* PCS misc*/ #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb0_pipe_clk_src"; @@ -174,34 +174,60 @@ status = "disabled"; }; - pcie_phy0: phy@86000 { + pcie_qmp0: phy@86000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; reg = <0x00086000 0x1000>; - #phy-cells = <0>; - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe_clk"; - clock-output-names = "pcie20_phy0_pipe_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; resets = <&gcc GCC_PCIE0_PHY_BCR>, <&gcc GCC_PCIE0PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; + + pcie_phy0: phy@86200 { + reg = <0x86200 0x16c>, + <0x86400 0x200>, + <0x86800 0x4f4>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk"; + }; }; - pcie_phy1: phy@8e000 { + pcie_qmp1: phy@8e000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; reg = <0x0008e000 0x1000>; - #phy-cells = <0>; - clocks = <&gcc GCC_PCIE1_PIPE_CLK>; - clock-names = "pipe_clk"; - clock-output-names = "pcie20_phy1_pipe_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; resets = <&gcc GCC_PCIE1_PHY_BCR>, <&gcc GCC_PCIE1PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; + + pcie_phy1: phy@8e200 { + reg = <0x8e200 0x16c>, + <0x8e400 0x200>, + <0x8e800 0x4f4>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie_1_pipe_clk"; + }; }; prng: rng@e3000 { @@ -212,7 +238,7 @@ status = "disabled"; }; - cryptobam: dma@704000 { + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00704000 0x20000>; interrupts = ; @@ -220,7 +246,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <1>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; status = "disabled"; }; @@ -293,6 +319,25 @@ #reset-cells = <0x1>; }; + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x000700>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts = ; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + sdhc_1: sdhci@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; @@ -411,6 +456,21 @@ status = "disabled"; }; + blsp1_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b9000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp_dma 21>, <&blsp_dma 20>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + blsp1_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 670bd1b..265e539 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -9,6 +9,7 @@ / { model = "Alcatel OneTouch Idol 3 (4.7)"; compatible = "alcatel,idol347", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index cee451e..d4d33dd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -4,10 +4,13 @@ #include "msm8916-pm8916.dtsi" #include +#include +#include / { model = "Asus Zenfone 2 Laser"; compatible = "asus,z00l", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; @@ -40,6 +43,21 @@ }; }; + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_vmmc_en_default>; + }; + usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; @@ -48,6 +66,64 @@ }; }; +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l8>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + imu@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <36 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l11>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + &blsp1_uart2 { status = "okay"; }; @@ -64,6 +140,16 @@ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; +&sdhc_2 { + status = "okay"; + vmmc-supply = <®_sd_vmmc>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -185,6 +271,46 @@ bias-pull-up; }; + imu_default: imu-default { + pins = "gpio36"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio112"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sd_vmmc_en_default: sd-vmmc-en-default { + pins = "gpio87"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + reset { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + usb_id_default: usb-id-default { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index e0075b5..42d93d3 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -25,6 +25,7 @@ / { model = "Huawei Ascend G7"; compatible = "huawei,g7", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 1e893c0..852de62 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -11,6 +11,7 @@ / { model = "Longcheer L8150"; compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; @@ -30,14 +31,6 @@ }; }; - // FIXME: Use extcon device provided by charger driver when available - usb_vbus: usb-vbus { - compatible = "linux,extcon-usb-gpio"; - vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_vbus_default>; - }; - gpio-keys { compatible = "gpio-keys"; @@ -121,9 +114,21 @@ status = "okay"; accelerometer@10 { - compatible = "bosch,bmc150_accel"; + compatible = "bosch,bmc156_accel"; reg = <0x10>; + /* + * For some reason the interrupt line is usually not connected + * to the BMC156. However, there are two pads next to the chip + * that can be shorted to make it work if needed. + * + * interrupt-parent = <&msmgpio>; + * interrupts = <116 IRQ_TYPE_EDGE_RISING>; + */ + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; @@ -133,9 +138,15 @@ }; magnetometer@12 { - compatible = "bosch,bmc150_magn"; + compatible = "bosch,bmc156_magn"; reg = <0x12>; + interrupt-parent = <&msmgpio>; + interrupts = <113 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&magn_int_default>; + vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; }; @@ -145,7 +156,8 @@ reg = <0x68>; interrupt-parent = <&msmgpio>; - interrupts = <23 IRQ_TYPE_EDGE_RISING>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>, + <22 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gyro_int_default>; @@ -196,6 +208,10 @@ linux,code = ; }; +&pm8916_usbin { + status = "okay"; +}; + &pm8916_vib { status = "okay"; }; @@ -225,11 +241,11 @@ &usb { status = "okay"; dr_mode = "peripheral"; - extcon = <&usb_vbus>; + extcon = <&pm8916_usbin>; }; &usb_hs_phy { - extcon = <&usb_vbus>; + extcon = <&pm8916_usbin>; }; &smd_rpm_regulators { @@ -336,6 +352,14 @@ }; &msmgpio { + accel_int_default: accel-int-default { + pins = "gpio116"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + camera_flash_default: camera-flash-default { pins = "gpio31", "gpio32"; function = "gpio"; @@ -361,25 +385,26 @@ }; gyro_int_default: gyro-int-default { - pins = "gpio23"; + pins = "gpio22", "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; }; - tp_int_default: tp-int-default { - pins = "gpio13"; + magn_int_default: magn-int-default { + pins = "gpio113"; function = "gpio"; drive-strength = <2>; bias-disable; }; - usb_vbus_default: usb-vbus-default { - pins = "gpio62"; + tp_int_default: tp-int-default { + pins = "gpio13"; function = "gpio"; - bias-pull-up; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 2784518..f9ce123 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -10,6 +10,7 @@ / { model = "BQ Aquaris X5 (Longcheer L8910)"; compatible = "longcheer,l8910", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts index d66c155..7c0ceb3 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -5,9 +5,22 @@ /dts-v1/; -#include "msm8916-mtp.dtsi" +#include "msm8916-pm8916.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + usid0 = &pm8916_0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart2 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi deleted file mode 100644 index 1bd0504..0000000 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8916-pm8916.dtsi" - -/ { - aliases { - serial0 = &blsp1_uart2; - usid0 = &pm8916_0; - }; - - chosen { - stdout-path = "serial0"; - }; -}; - -&blsp1_uart2 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 6cc2eae..4ba11b0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -7,6 +7,7 @@ / { model = "Samsung Galaxy A3U (EUR)"; compatible = "samsung,a3u-eur", "qcom,msm8916"; + chassis-type = "handset"; reg_panel_vdd3: regulator-panel-vdd3 { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index c2eff5a..d978c9a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -7,6 +7,7 @@ / { model = "Samsung Galaxy A5U (EUR)"; compatible = "samsung,a5u-eur", "qcom,msm8916"; + chassis-type = "handset"; reg_touch_key: regulator-touch-key { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts new file mode 100644 index 0000000..a78f87a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -0,0 +1,534 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2019 Stephan Gerhold + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include +#include +#include + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on this device at the moment, + * even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts + */ + +/ { + model = "Samsung Galaxy S4 Mini Value Edition"; + compatible = "samsung,serranove", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + + reg_vdd_tsp: regulator-vdd-tsp { + compatible = "regulator-fixed"; + regulator-name = "vdd_tsp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default>; + }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; + + reg_key_led: regulator-key-led { + compatible = "regulator-fixed"; + regulator-name = "key_led"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_led_en_default>; + }; + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_irq_default>; + }; + }; + + i2c-tkey { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <98 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <®_touch_key>; + vdd-supply = <®_key_led>; + vddio-supply = <&pm8916_l6>; + + linux,keycodes = ; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_default>; + }; + }; + + i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + nfc@2b { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x2b>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + imu@6b { + compatible = "st,lsm6ds3"; + reg = <0x6b>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_irq_default>; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt541"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + + vdd-supply = <®_vdd_tsp>; + vddo-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_irq_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3660b"; + }; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; + + /* + * FIXME: Disable UHS-I modes since tuning fails with: + * + * sdhci_msm 7864900.sdhci: mmc1: No tuning point found + * mmc1: tuning execution failed: -5 + * mmc1: error -5 whilst initialising SD card + * + * This is the quirk used on downstream, which suggests this is + * a hardware limitation. However, probing a card using DDR50 works + * (without tuning), so maybe only tuning is broken? + */ + no-1-8-v; +}; + +&usb { + status = "okay"; + extcon = <&muic>, <&muic>; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + fg_alert_default: fg-alert-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default { + pins = "gpio52"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + imu_irq_default: imu-irq-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_i2c_default: muic-i2c-default { + pins = "gpio105", "gpio106"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_irq_default: muic-irq-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + nfc_default: nfc-default { + pins = "gpio20", "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + + irq { + pins = "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + nfc_i2c_default: nfc-i2c-default { + pins = "gpio0", "gpio1"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_default: tkey-default { + pins = "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_en_default: tkey-en-default { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_i2c_default: tkey-i2c-default { + pins = "gpio16", "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_led_en_default: tkey-led-en-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default: tsp-en-default { + pins = "gpio73"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_irq_default: tsp-irq-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 4e20cc0..69a44c6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -11,6 +11,7 @@ / { model = "Xiaomi Redmi 2 (Wingtech WT88047)"; compatible = "wingtech,wt88047", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 3f85e34..c1c42f2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -41,9 +41,13 @@ no-map; }; - smem_mem: smem_region@86300000 { + smem@86300000 { + compatible = "qcom,smem"; reg = <0x0 0x86300000 0x0 0x100000>; no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; }; hypervisor@86400000 { @@ -124,6 +128,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,acc = <&cpu0_acc>; + qcom,saw = <&cpu0_saw>; }; CPU1: cpu@1 { @@ -137,6 +143,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; + qcom,acc = <&cpu1_acc>; + qcom,saw = <&cpu1_saw>; }; CPU2: cpu@2 { @@ -150,6 +158,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; + qcom,acc = <&cpu2_acc>; + qcom,saw = <&cpu2_saw>; }; CPU3: cpu@3 { @@ -163,6 +173,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; + qcom,acc = <&cpu3_acc>; + qcom,saw = <&cpu3_saw>; }; L2_0: l2-cache { @@ -323,15 +335,6 @@ }; }; - smem { - compatible = "qcom,smem"; - - memory-region = <&smem_mem>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - - hwlocks = <&tcsr_mutex 3>; - }; - smp2p-hexagon { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -414,7 +417,7 @@ }; }; - soc: soc { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -445,7 +448,7 @@ }; }; - rpm_msg_ram: memory@60000 { + rpm_msg_ram: sram@60000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00060000 0x8000>; }; @@ -1384,11 +1387,17 @@ lpass: audio-controller@7708000 { status = "disabled"; compatible = "qcom,lpass-cpu-apq8016"; + + /* + * Note: Unlike the name would suggest, the SEC_I2S_CLK + * is actually only used by Tertiary MI2S while + * Primary/Secondary MI2S both use the PRI_I2S_CLK. + */ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; @@ -1420,7 +1429,7 @@ }; sdhc_1: sdhci@7824000 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1438,7 +1447,7 @@ }; sdhc_2: sdhci@7864000 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1765,7 +1774,7 @@ label = "pronto"; - wcnss { + wcnss_ctrl: wcnss { compatible = "qcom,wcnss"; qcom,smd-channels = "WCNSS_CTRL"; @@ -1871,6 +1880,54 @@ status = "disabled"; }; }; + + cpu0_acc: power-manager@b088000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b088000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu0_saw: power-manager@b089000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu1_acc: power-manager@b098000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b098000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu1_saw: power-manager@b099000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu2_acc: power-manager@b0a8000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b0a8000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu2_saw: power-manager@b0a9000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu3_acc: power-manager@b0b8000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b0b8000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu3_saw: power-manager@b0b9000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 1ccca83..4da6c44 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -16,6 +16,8 @@ / { model = "LG Nexus 5X"; compatible = "lg,bullhead", "qcom,msm8992"; + chassis-type = "handset"; + /* required for bootloader to select correct board */ qcom,msm-id = <251 0>, <252 0>; qcom,board-id = <0xb64 0>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts index 5322b9c..8933b53 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts @@ -12,4 +12,5 @@ / { model = "Microsoft Lumia 950"; compatible = "microsoft,talkman", "qcom,msm8992"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 357d554..69fcb6b 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -14,6 +14,8 @@ / { model = "Xiaomi Mi 4C"; compatible = "xiaomi,libra", "qcom,msm8992"; + chassis-type = "handset"; + /* required for bootloader to select correct board */ qcom,msm-id = <251 0 252 0>; qcom,pmic-id = <65545 65546 0 0>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts index c096b77..0e3dd48 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts @@ -14,6 +14,7 @@ / { model = "Huawei Nexus 6P"; compatible = "huawei,angler", "qcom,msm8994"; + chassis-type = "handset"; /* required for bootloader to select correct board */ qcom,msm-id = <207 0x20000>; qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts index d0aaf57..c593418 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts @@ -12,4 +12,5 @@ / { model = "Microsoft Lumia 950 XL"; compatible = "microsoft,cityman", "qcom,msm8994"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts index b5e90c8..99388b0 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z3+/Z4"; compatible = "sony,ivy-row", "qcom,msm8994"; + chassis-type = "handset"; }; &pm8994_l3 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts index a1d1a07..71758d2 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z4 Tablet (LTE)"; compatible = "sony,karin-row", "qcom,msm8994"; + chassis-type = "tablet"; }; &blsp2_i2c5 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts index 1385956..69b7df0 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z5 Premium"; compatible = "sony,satsuki-row", "qcom,msm8994"; + chassis-type = "handset"; }; &pm8994_l14 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts index d3ba986..466508c 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z5"; compatible = "sony,sumire-row", "qcom,msm8994"; + chassis-type = "handset"; }; /delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts index f129479..76bf501 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z5 Compact"; compatible = "sony,suzuran-row", "qcom,msm8994"; + chassis-type = "handset"; }; &pm8994_l14 { diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 986fe60..5a9a5ed 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -715,7 +715,7 @@ reg = <0xfc400000 0x2000>; }; - rpm_msg_ram: memory@fc428000 { + rpm_msg_ram: sram@fc428000 { compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts index 45ed594..7d9fc35 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -5,9 +5,31 @@ /dts-v1/; -#include "msm8996-mtp.dtsi" +#include "msm8996.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8996 MTP"; compatible = "qcom,msm8996-mtp"; + + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + serial@75b0000 { + status = "okay"; + }; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi deleted file mode 100644 index ac43a91..0000000 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8996.dtsi" - -/ { - aliases { - serial0 = &blsp2_uart2; - }; - - chosen { - stdout-path = "serial0"; - }; - - soc { - serial@75b0000 { - status = "okay"; - }; - }; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_phy { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts index b4cca54..4a0645d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts @@ -12,6 +12,7 @@ / { model = "Sony Xperia X Performance"; compatible = "sony,dora-row", "qcom,msm8996"; + chassis-type = "handset"; }; /delete-node/ &tof_sensor; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts index be6ea85..d3100dd 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts @@ -12,4 +12,5 @@ / { model = "Sony Xperia XZ"; compatible = "sony,kagura-row", "qcom,msm8996"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts index 1eee7d0..3e5bdab 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts @@ -12,6 +12,7 @@ / { model = "Sony Xperia XZs"; compatible = "sony,keyaki-row", "qcom,msm8996"; + chassis-type = "handset"; }; &pm8994_l19 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index 507396c..ff7f39d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -620,6 +620,7 @@ &pmi8994_wled { status = "okay"; default-brightness = <512>; + qcom,num-strings = <3>; }; &rpm_requests { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi new file mode 100644 index 0000000..01e573f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -0,0 +1,673 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana + */ + +/dts-v1/; + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include +#include + +/ { + clocks { + compatible = "simple-bus"; + + divclk1_cdc: divclk1 { + compatible = "gpio-gate-clock"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk1_default>; + }; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + vol_up { + label = "Volume Up"; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + dome { + label = "Home"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + memory@88800000 { + reg = <0x0 0x88800000 0x0 0x1400000>; + no-map; + }; + + /* This platform has all PIL regions offset by 0x1400000 */ + /delete-node/ mpss@88800000; + mpss_region: mpss@89c00000 { + reg = <0x0 0x89c00000 0x0 0x6200000>; + no-map; + }; + + /delete-node/ adsp@8ea00000; + adsp_region: adsp@8ea00000 { + reg = <0x0 0x8fe00000 0x0 0x1b00000>; + no-map; + }; + + /delete-node/ slpi@90b00000; + slpi_region: slpi@91900000 { + reg = <0x0 0x91900000 0x0 0xa00000>; + no-map; + }; + + /delete-node/ gpu@8f200000; + zap_shader_region: gpu@92300000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x92300000 0x0 0x2000>; + no-map; + }; + + /delete-node/ venus@91000000; + venus_region: venus@90400000 { + reg = <0x0 0x92400000 0x0 0x500000>; + no-map; + }; + + ramoops@92900000 { + compatible = "ramoops"; + reg = <0x0 0x92900000 0x0 0x100000>; + no-map; + + record-size = <0x8000>; + console-size = <0x80000>; + ftrace-size = <0x20000>; + pmsg-size = <0x40000>; + }; + + /delete-node/ rmtfs@86700000; + rmtfs@f6c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /delete-node/ mba@91500000; + mba_region: mba@f6f00000 { + reg = <0x0 0xf6f00000 0x0 0x100000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v2_tp: vdd-3v2-tp { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v2_tp"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr>; + + gpio = <&tlmm 73 0>; + enable-active-high; + }; + + vdd_3v3: rome-vreg { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr_bbyp>; + + gpio = <&pm8994_gpios 9 0>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&rome_enable_default>; + + /* Required by QCA6174a - vddpe-3v3 */ + regulator-always-on; + }; + + /* WL_EN pin defined as a fixed regulator */ + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default>; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + label = "NFC_I2C"; + clock-frequency = <400000>; + + nfc: pn548@28 { + compatible = "nxp,nxp-nci-i2c"; + + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; +}; + +&blsp2_i2c3 { + status = "okay"; + label = "TYPEC_I2C"; + + typec: tusb320@47 { + compatible = "ti,tusb320"; + reg = <0x47>; + interrupt-parent = <&tlmm>; + interrupts = <63 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + label = "MSM_TS_I2C"; +}; + +&blsp1_uart2 { + status = "okay"; + label = "QCA_UART"; + + bluetooth: qca6174a { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&dsi0 { + status = "okay"; + + vdd-supply = <&vreg_l2a_1p25>; + vddio-supply = <&vreg_l14a_1p8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; +}; + +&dsi0_out { + status = "okay"; + + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + + vcca-supply = <&vreg_l28a_0p925>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pcie0 { + status = "okay"; + + /* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */ + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; + + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_resin { + status = "okay"; + + linux,code = ; +}; + +&usb3 { + status = "okay"; + extcon = <&typec>; + + qcom,select-utmi-as-pipe-clk; + + dwc3@6a00000 { + extcon = <&typec>; + + /* usb3-phy is not used on this device */ + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + + maximum-speed = "high-speed"; + snps,is-utmi-l1-suspend; + snps,usb2-gadget-lpm-disable; + snps,hird-threshold = /bits/ 8 <0>; + }; +}; + +&hsusb_phy1 { + status = "okay"; + extcon = <&typec>; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; + + vddp-ref-clk-supply = <&vreg_l25a_1p2>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&divclk1_cdc>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-vbat-supply = <&vph_pwr>; + vdd-micbias-supply = <&vph_pwr_bbyp>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + /* Required by QCA6174a - vdd-core */ + regulator-always-on; + }; + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + + /* Required by QCA6174a - vddio */ + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_0p8: s7 { + regulator-name = "vreg_s7a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p8: l6 { + regulator-name = "vreg_l6a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l19a_3p3: l19 { + regulator-name = "vreg_l19a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l27a_1p2: l27 { + regulator-name = "vreg_l27a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* Required by QCA6174a - vddio-xtal */ + regulator-always-on; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s8 { + qcom,saw-slave; + }; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + vreg_apc_0p8: s11 { + qcom,saw-leader; + regulator-name = "vreg_apc_0p8"; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + regulator-max-step-microvolt = <150000>; + regulator-always-on; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2 { + regulator-name = "vdd_gfx"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1015000>; + regulator-enable-ramp-delay = <500>; + }; +}; + +&pm8994_gpios { + wlan_en_default: wlan-en-default { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; + }; + + rome_enable_default: rome-enable-default { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + divclk1_default: divclk1_default { + pins = "gpio15"; + function = PMIC_GPIO_FUNC_FUNC1; + bias-disable; + power-source = ; + qcom,drive-strength = ; + }; + + divclk4_pin_a: divclk4 { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = ; + }; +}; + +&tlmm { + mdss_dsi_default: mdss_dsi_default { + pins = "gpio8"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_sleep: mdss_dsi_sleep { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_default: mdss_te_default { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_sleep: mdss_te_sleep { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_default: nfc_default { + pins = "gpio12", "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts new file mode 100644 index 0000000..34f82e0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -0,0 +1,465 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Raffaele Tranquillini + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include +#include +#include + +/ { + model = "Xiaomi Mi 5"; + compatible = "xiaomi,gemini", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <246 0x30001>; + qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>; + qcom,board-id = <31 0>; + + clocks { + divclk2_haptics: divclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk2"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk2_pin_a>; + }; + }; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/gemini/adsp.mbn"; +}; + +&blsp2_i2c3 { + haptics: drv2604@5a { + compatible = "ti,drv2604"; + reg = <0x5a>; + enable-gpio = <&tlmm 93 0x00>; + mode = ; + library-sel = ; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&vibrator_default>; + pinctrl-1 = <&vibrator_sleep>; + }; + + lp5562@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + enable-gpio = <&pm8994_gpios 7 1>; + clock-mode = /bits/8 <2>; + label = "button-backlight"; + + led@0 { + reg = <0>; + chan-name = "button-backlight"; + led-cur = /bits/ 8 <0x32>; + max-cur = /bits/ 8 <0xC8>; + }; + + led@1 { + reg = <0>; + chan-name = "button-backlight1"; + led-cur = /bits/ 8 <0x32>; + max-cur = /bits/ 8 <0xC8>; + }; + }; +}; + +&blsp2_i2c6 { + synaptics@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdda-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; + +}; + +&dsi0 { + status = "okay"; + + vdd-supply = <&vreg_l2a_1p25>; + vdda-supply = <&vreg_l19a_3p3>; + vddio-supply = <&vreg_l14a_1p8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; + + panel: panel@0 { + compatible = "jdi,fhd-r63452"; + reg = <0>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + backlight = <&pmi8994_wled>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; + }; +}; + +&pmi8994_wled { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "gemini"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/gemini/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l29a_2p7: l29 { + regulator-name = "vreg_l29a_2p7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "FP_ID", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ + + divclk2_pin_a: divclk2 { + pins = "gpio16"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = ; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "NC", /* MPP_1 */ + "CCI_TIMER1", /* MPP_2 */ + "PMIC_SLB", /* MPP_3 */ + "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ + "NC", /* MPP_5 */ + "NC", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_RST", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "ERR_INT_N", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "LCD0_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "LCD_TE", /* GPIO_10 */ + "LCD_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "NC", /* GPIO_29 */ + "CAM1_RST_N", /* GPIO_30 */ + "NC", /* GPIO_31 */ + "NC", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "FP_DOME_SW", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "FM_INT_N", /* GPIO_38 */ + "FM_RESET_N", /* GPIO_39 */ + "NC", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "AUDIO_SWITCH_EN", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "SPKR_I2S_BCK", /* GPIO_58 */ + "SPKR_I2S_WS", /* GPIO_59 */ + "SPKR_I2S_DOUT", /* GPIO_60 */ + "SPKR_I2S_DIN", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "HIFI_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "FM_I2S_CLK", /* GPIO_75 */ + "FM_I2S_SYNC", /* GPIO_76 */ + "FM_I2S_DATA", /* GPIO_77 */ + "FM_STATUS", /* GPIO_78 */ + "NC", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "NC", /* GPIO_85 */ + "CAM_VDD_1P05_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "TS_RESOUT_N", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "NC", /* GPIO_92 */ + "HAPTICS_EN", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "NC", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "NC", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACCEL_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "NC", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "NC", /* GPIO_131 */ + "NC", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "NC", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen_default { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen_sleep { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + vibrator_default: vibrator_default { + pins = "gpio93"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + vibrator_sleep: vibrator_sleep { + pins = "gpio93"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts new file mode 100644 index 0000000..e5b8402 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include "pmi8996.dtsi" +#include +#include + +/ { + model = "Xiaomi Mi Note 2"; + compatible = "xiaomi,scorpio", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <305 0x10000>; + qcom,board-id = <34 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@83401000 { + compatible = "simple-framebuffer"; + reg = <0x00 0x83401000 0x00 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + /* DSI0 and MDP SMMU clocks */ + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MMSS_MMAGIC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc SMMU_MDP_AHB_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>; + + /* MDSS power domain */ + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + reserved-memory { + cont_splash_mem: memory@83401000 { + reg = <0x0 0x83401000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + }; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/scorpio/adsp.mbn"; +}; + +&blsp2_i2c6 { + touchscreen: atmel-mxt-ts@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdda-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; + }; +}; + +&mdp_smmu { + /* + * Probing this SMMU causes a crash due to writing to some secure + * registers. Disable it for now. + */ + status = "disabled"; +}; + +&mdss { + /* + * MDSS depends on the MDP SMMU, and probing it alters the bootloader + * configured framebuffer used by simplefb. Disable it for now. + */ + status = "disabled"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "scorpio"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/scorpio/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + vreg_l11a_1p1: l11 { + regulator-name = "vreg_l11a_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l18a_2p8: l18 { + regulator-name = "vreg_l18a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <3500000>; + }; + vreg_l29a_2p7: l29 { + regulator-name = "vreg_l29a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + }; +}; + +&vdd_gfx { + regulator-max-microvolt = <1065000>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN_A", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "KEYPAD_LED_EN_B", /* GPIO_10 */ + "FP_ID", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ +}; + +&pm8994_mpps { + gpio-line-names = + "VREF_SDC_UIM_APC", /* MPP_1 */ + "NC", /* MPP_2 */ + "VREF_DACX", /* MPP_3 */ + "NC", /* MPP_4 */ + "NC", /* MPP_5 */ + "STAT_SMB1351", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_RST", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "NC", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "OLED_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "OLED_TE", /* GPIO_10 */ + "OLED_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "OLED_ID_DET2", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "OLED_ERR_FG", /* GPIO_29 */ + "CAM1_RST_N", /* GPIO_30 */ + "HIFI_SW_MUTE", /* GPIO_31 */ + "NC", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "FP_DOME_SW", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "OV_PWDN", /* GPIO_38 */ + "NC", /* GPIO_39 */ + "VDDR_1P6_EN", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "AUDIO_SWITCH_EN", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "SPKR_I2S_BCK", /* GPIO_58 */ + "SPKR_I2S_WS", /* GPIO_59 */ + "SPKR_I2S_DOUT", /* GPIO_60 */ + "SPKR_I2S_DIN", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "CDC_44K1_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "TSP_RST_N", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TOUCHKEY_INT", /* GPIO_77 */ + "SPKR_I2S_MCLK", /* GPIO_78 */ + "SPKR_PA_INT", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "HIFI_SD", /* GPIO_85 */ + "CAM_VDD_1P05_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "NC", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "NC", /* GPIO_92 */ + "NC", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "GRFC_0", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "NC", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACC_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "TSP_TA", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "HIFI_PWR_EN", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "NC", /* GPIO_131 */ + "NC", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "HIFI_SW_SEL", /* GPIO_135 */ + "GRFC_15", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen_default { + pins = "gpio75", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen_sleep { + pins = "gpio75", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 52df22a..bccc2d0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -582,7 +582,6 @@ pcie_phy: phy@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; reg = <0x00034000 0x488>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -598,12 +597,13 @@ reset-names = "phy", "common", "cfg"; status = "disabled"; - pciephy_0: lane@35000 { + pciephy_0: phy@35000 { reg = <0x00035000 0x130>, <0x00035200 0x200>, <0x00035400 0x1dc>; #phy-cells = <0>; + #clock-cells = <1>; clock-output-names = "pcie_0_pipe_clk_src"; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; @@ -611,7 +611,7 @@ reset-names = "lane0"; }; - pciephy_1: lane@36000 { + pciephy_1: phy@36000 { reg = <0x00036000 0x130>, <0x00036200 0x200>, <0x00036400 0x1dc>; @@ -624,7 +624,7 @@ reset-names = "lane1"; }; - pciephy_2: lane@37000 { + pciephy_2: phy@37000 { reg = <0x00037000 0x130>, <0x00037200 0x200>, <0x00037400 0x1dc>; @@ -638,7 +638,7 @@ }; }; - rpm_msg_ram: memory@68000 { + rpm_msg_ram: sram@68000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00068000 0x6000>; }; @@ -705,6 +705,28 @@ #thermal-sensor-cells = <1>; }; + cryptobam: dma@644000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00644000 0x24000>; + interrupts = ; + clocks = <&gcc GCC_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely = <1>; + }; + + crypto: crypto@67a000 { + compatible = "qcom,crypto-v5.4"; + reg = <0x0067a000 0x6000>; + clocks = <&gcc GCC_CE1_AHB_CLK>, + <&gcc GCC_CE1_AXI_CLK>, + <&gcc GCC_CE1_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + }; + tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; reg = <0x00740000 0x40000>; @@ -1211,6 +1233,20 @@ }; }; + blsp1_uart2_default: blsp1-uart2-default { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + blsp1_i2c3_default: blsp1-i2c2-default { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; @@ -1239,6 +1275,20 @@ bias-disable; }; + blsp2_i2c3_default: blsp2-i2c3 { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c3_sleep: blsp2-i2c3-sleep { + pins = "gpio51", "gpio52"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wcd_intr_default: wcd-intr-default{ pins = "gpio54"; function = "gpio"; @@ -1495,6 +1545,11 @@ }; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: qcom,spmi@400f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0400f000 0x1000>, @@ -1746,7 +1801,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufsphy_lane: lanes@627400 { + ufsphy_lane: phy@627400 { reg = <0x627400 0x12c>, <0x627600 0x200>, <0x627c00 0x1b4>; @@ -2586,7 +2641,6 @@ usb3phy: phy@7410000 { compatible = "qcom,msm8996-qmp-usb3-phy"; reg = <0x07410000 0x1c4>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -2601,12 +2655,13 @@ reset-names = "phy", "common"; status = "disabled"; - ssusb_phy_0: lane@7410200 { + ssusb_phy_0: phy@7410200 { reg = <0x07410200 0x200>, <0x07410400 0x130>, <0x07410600 0x1a8>; #phy-cells = <0>; + #clock-cells = <1>; clock-output-names = "usb3_phy_pipe_clk_src"; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -2686,7 +2741,7 @@ status = "disabled"; }; - blsp1_dma: dma@7544000 { + blsp1_dma: dma-controller@7544000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07544000 0x2b000>; interrupts = ; @@ -2704,6 +2759,9 @@ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; dma-names = "tx", "rx"; status = "disabled"; @@ -2743,7 +2801,7 @@ status = "disabled"; }; - blsp2_dma: dma@7584000 { + blsp2_dma: dma-controller@7584000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07584000 0x2b000>; interrupts = ; @@ -2808,6 +2866,24 @@ status = "disabled"; }; + blsp2_i2c3: i2c@75b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b7000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c3_default>; + pinctrl-1 = <&blsp2_i2c3_sleep>; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp2_i2c5: i2c@75b9000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75b9000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts index db5821b..e204b70 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts @@ -8,6 +8,7 @@ / { model = "Asus NovaGo TP370QL"; compatible = "asus,novago-tp370ql", "qcom,msm8998"; + chassis-type = "convertible"; }; &blsp1_i2c6 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 125d792..3f60575 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -313,6 +313,8 @@ &ufsphy { status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts new file mode 100644 index 0000000..3d495ce --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-mtp.dtsi" + +#include +#include +#include + +/ { + model = "F(x)tec Pro1 (QX1000)"; + compatible = "fxtec,pro1", "qcom,msm8998"; + chassis-type = "handset"; + qcom,board-id = <0x02000b 0x10>; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + }; + + gpio-hall-sensors { + compatible = "gpio-keys"; + input-name = "hall-sensors"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor1_default>; + + hall-sensor1 { + label = "Keyboard Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; + debounce-interval = <15>; + gpio-key,wakeup; + linux,input-type = ; + linux,code = ; + }; + }; + + gpio-kb-extra-keys { + compatible = "gpio-keys"; + input-name = "extra-kb-keys"; + label = "Keyboard extra keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_kb_pins_extra>; + + home { + label = "Home"; + gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + super-l { + label = "Super Left"; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + super-r { + label = "Super Right"; + gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + shift { + label = "Shift"; + gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + ctrl { + label = "Ctrl"; + gpios = <&tlmm 128 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + alt { + label = "Alt"; + gpios = <&tlmm 129 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "side-buttons"; + label = "Side buttons"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + vol-up { + label = "Volume Up"; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + + camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + }; + + keyboard-leds { + compatible = "gpio-leds"; + + backlight { + color = ; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + label = "white:kbd_backlight"; + retain-state-suspended; + }; + + caps-lock { + color = ; + default-state = "off"; + function = LED_FUNCTION_CAPSLOCK; + gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + label = "yellow:capslock"; + linux,default-trigger = "kbd-capslock"; + }; + }; + + reserved-memory { + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2000000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + console-size = <0x60000>; + ecc-size = <16>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + record-size = <0x10000>; + }; + }; + + ts_vio_vreg: ts-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "ts_vio_reg"; + startup-delay-us = <2>; + enable-active-high; + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vio_default>; + regulator-always-on; + }; +}; + +&blsp2_i2c1 { + status = "ok"; + + touchscreen@14 { + compatible = "goodix,gt9286"; + reg = <0x14>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vreg_l28_3p0>; + VDDIO-supply = <&ts_vio_vreg>; + pinctrl-names = "active"; + pinctrl-0 = <&ts_rst_n>, <&ts_int_n>; + }; +}; + +&mmcc { + status = "ok"; +}; + +&mmss_smmu { + status = "ok"; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_focus_pin_a: cam-focus-btn-active { + pins = "gpio7"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active { + pins = "gpio8"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = ; + bias-pull-up; + debounce = <15625>; + linux,code = ; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + bias-pull-down; + drive-strength = <2>; + }; + + gpio_kb_pins_extra: gpio-kb-pins-extra { + pins = "gpio21", "gpio32", "gpio33", "gpio114", + "gpio128", "gpio129"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_vio_default: ts-vio-def { + pins = "gpio81"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ts_rst_n: ts-rst-n { + pins = "gpio89"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; + + hall_sensor1_default: hall-sensor1-def { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + bias-disable; + drive-strength = <8>; + }; +}; + +&ufshc { + status = "ok"; +}; + +&ufsphy { + status = "ok"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; + +/* GT9286 analog supply */ +&vreg_l28_3p0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts index 2407312..1eb406b 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts @@ -8,6 +8,7 @@ / { model = "HP Envy x2"; compatible = "hp,envy-x2", "qcom,msm8998"; + chassis-type = "convertible"; }; &blsp1_i2c6 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts index 89492ed..f55f6f3 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -8,6 +8,7 @@ / { model = "Lenovo Miix 630"; compatible = "lenovo,miix-630", "qcom,msm8998"; + chassis-type = "convertible"; }; &blsp1_i2c6 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index a1d15ea..af67c64 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -371,10 +371,6 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; vddp-ref-clk-supply = <&vreg_l26a_1p2>; - vdda-phy-max-microamp = <51400>; - vdda-pll-max-microamp = <14600>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index 66b9297..9563eb6 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -11,6 +11,7 @@ / { model = "OnePlus 5"; compatible = "oneplus,cheeseburger", "qcom,msm8998"; + chassis-type = "handset"; /* Required for bootloader to select correct board */ qcom,board-id = <8 0 16859 23>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 0f5c782..6541880 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -480,10 +480,6 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; vddp-ref-clk-supply = <&vreg_l26a_1p2>; - vdda-phy-max-microamp = <51400>; - vdda-pll-max-microamp = <14600>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts index 544b9b0..5d0dabb 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts @@ -10,6 +10,7 @@ / { model = "OnePlus 5T"; compatible = "oneplus,dumpling", "qcom,msm8998"; + chassis-type = "handset"; /* Required for bootloader to select correct board */ qcom,board-id = <8 0 17801 43>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts new file mode 100644 index 0000000..caacb7c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ1 Compact"; + compatible = "sony,xperia-lilac", "qcom,msm8998"; + chassis-type = "handset"; +}; + +&ibb { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + qcom,soft-start-us = <800>; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts new file mode 100644 index 0000000..978495a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ Premium"; + compatible = "sony,xperia-maple", "qcom,msm8998"; + chassis-type = "handset"; + + disp_dvdd_vreg: disp-dvdd-vreg { + compatible = "regulator-fixed"; + regulator-name = "disp_dvdd_en"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&disp_dvdd_en>; + }; +}; + +&ibb { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; +}; + +&lab { + regulator-min-microvolt = <5800000>; + regulator-max-microvolt = <5800000>; + qcom,soft-start-us = <200>; +}; + +&pmi8998_gpio { + disp_dvdd_en: disp-dvdd-en-active { + pins = "gpio10"; + function = "normal"; + bias-disable; + drive-push-pull; + output-high; + power-source = <0>; + qcom,drive-strength = <1>; + }; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts new file mode 100644 index 0000000..4a1f98a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ1"; + compatible = "sony,xperia-poplar", "qcom,msm8998"; + chassis-type = "handset"; +}; + +&ibb { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; +}; + +&lab { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + qcom,soft-start-us = <800>; +}; + +&vreg_l18a_2p85 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi new file mode 100644 index 0000000..91e3912 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -0,0 +1,670 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include +#include +#include +#include +#include + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */ + qcom,board-id = <8 0>; + + clocks { + compatible = "simple-bus"; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk_pin>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + }; + }; + + board_vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-always-on; + regulator-boot-on; + }; + + cam0_vdig_vreg: cam0-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam0_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_vdig_default>; + }; + + cam1_vdig_vreg: cam1-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam1_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam1_vdig_default>; + vin-supply = <&vreg_s3a_1p35>; + }; + + cam_vio_vreg: cam-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vio_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_vio_default>; + vin-supply = <&vreg_lvs1a_1p8>; + }; + + touch_vddio_vreg: touch-vddio-vreg { + compatible = "regulator-fixed"; + regulator-name = "touch_vddio_vreg"; + startup-delay-us = <10000>; + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vddio_en>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + label = "Side buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + vol-down { + label = "Volume Down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + + camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + input-name = "hall-sensors"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor0_default>; + + hall-sensor0 { + label = "Cover Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <30>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x3700000>; + no-map; + }; + + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + adsp_region: memory@fe000000 { + reg = <0x0 0xfe000000 0x0 0x800000>; + no-map; + }; + + qseecom_region: memory@fe800000 { + reg = <0x0 0xfe800000 0x0 0x1400000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vib_default>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_n>; + + vdd-supply = <&vreg_l28_3p0>; + vio-supply = <&touch_vddio_vreg>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5_sleep { + bias-disable; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&ibb { + regulator-min-microamp = <800000>; + regulator-max-microamp = <800000>; + regulator-enable-ramp-delay = <200>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <600>; + regulator-settling-time-down-us = <1000>; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&lab { + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-enable-ramp-delay = <500>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <50000>; + regulator-settling-time-down-us = <3000>; + regulator-soft-start; +}; + +&mmcc { + status = "ok"; +}; + +&mmss_smmu { + status = "ok"; +}; + +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1088000>; + regulator-enable-ramp-delay = <500>; + regulator-always-on; + }; + }; +}; + +&pm8998_gpio { + vol_down_pin_a: vol-down-active { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_focus_pin_a: cam-focus-btn-active { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + audio_mclk_pin: audio-mclk-pin-active { + pins = "gpio13"; + function = "func2"; + power-source = <0>; + }; +}; + +&pmi8998_gpio { + cam_vio_default: cam-vio-active { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = ; + power-source = <1>; + }; + + vib_default: vib-en { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = ; + power-source = <0>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = ; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2032000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-system-load = <73400>; + regulator-allow-set-load; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-system-load = <12560>; + regulator-allow-set-load; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l14a_1p85: l14 { + regulator-min-microvolt = <1848000>; + regulator-max-microvolt = <1856000>; + regulator-system-load = <32000>; + regulator-allow-set-load; + }; + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p85: l18 {}; + vreg_l19a_2p7: l19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + vreg_l22a_2p85: l22 { }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_ven: nfc-ven { + pins = "gpio12"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + + msm_mclk0_default: msm-mclk0-active { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + msm_mclk1_default: msm-mclk1-active { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cci0_default: cci0-default { + pins = "gpio18", "gpio19"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cci1_default: cci1-default { + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cam0_vdig_default: cam0-vdig-default { + pins = "gpio21"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cam1_vdig_default: cam1-vdig-default { + pins = "gpio25"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + hall_sensor0_default: acc-cover-open { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_vddio_en: ts-vddio-en-default { + pins = "gpio133"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; +}; + +/* + * WARNING: + * Disable UFS until card quirks are in to avoid unrecoverable hard-brick + * that would happen as soon as the UFS card gets probed as, without the + * required quirks, the bootloader will be erased right after card probe. + */ +&ufshc { + status = "disabled"; +}; + +&ufsphy { + status = "disabled"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + /* Force to peripheral until we have Type-C hooked up */ + dr_mode = "peripheral"; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 34039b5..408f265 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -4,6 +4,7 @@ #include #include #include +#include #include #include #include @@ -117,7 +118,7 @@ clock-output-names = "xo_board"; }; - sleep_clk { + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32764>; @@ -308,38 +309,42 @@ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { compatible = "arm,idle-state"; idle-state-name = "little-retention"; + /* CPU Retention (C2D), L2 Active */ arm,psci-suspend-param = <0x00000002>; entry-latency-us = <81>; exit-latency-us = <86>; - min-residency-us = <200>; + min-residency-us = <504>; }; LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { compatible = "arm,idle-state"; idle-state-name = "little-power-collapse"; + /* CPU + L2 Power Collapse (C3, D4) */ arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <273>; - exit-latency-us = <612>; - min-residency-us = <1000>; + entry-latency-us = <814>; + exit-latency-us = <4562>; + min-residency-us = <9183>; local-timer-stop; }; BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; idle-state-name = "big-retention"; + /* CPU Retention (C2D), L2 Active */ arm,psci-suspend-param = <0x00000002>; entry-latency-us = <79>; exit-latency-us = <82>; - min-residency-us = <200>; + min-residency-us = <1302>; }; BIG_CPU_SLEEP_1: cpu-sleep-1-1 { compatible = "arm,idle-state"; idle-state-name = "big-power-collapse"; + /* CPU + L2 Power Collapse (C3, D4) */ arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <336>; - exit-latency-us = <525>; - min-residency-us = <1000>; + entry-latency-us = <724>; + exit-latency-us = <2027>; + min-residency-us = <9419>; local-timer-stop; }; }; @@ -855,21 +860,24 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x00100000 0xb0000>; + + clock-names = "xo", "sleep_clk"; + clocks = <&xo>, <&sleep_clk>; }; - rpm_msg_ram: memory@778000 { + rpm_msg_ram: sram@778000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00778000 0x7000>; }; - qfprom: qfprom@780000 { + qfprom: qfprom@784000 { compatible = "qcom,qfprom"; - reg = <0x00780000 0x621c>; + reg = <0x00784000 0x621c>; #address-cells = <1>; #size-cells = <1>; - qusb2_hstx_trim: hstx-trim@423a { - reg = <0x423a 0x1>; + qusb2_hstx_trim: hstx-trim@23a { + reg = <0x23a 0x1>; bits = <0 4>; }; }; @@ -954,10 +962,10 @@ interrupts = ; interrupt-names = "msi"; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 135 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 136 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 138 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, @@ -990,7 +998,7 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - pciephy: lane@1c06800 { + pciephy: phy@1c06800 { reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; #phy-cells = <0>; @@ -1062,7 +1070,7 @@ reset-names = "ufsphy"; resets = <&ufshc 0>; - ufsphy_lanes: lanes@1da7400 { + ufsphy_lanes: phy@1da7400 { reg = <0x01da7400 0x128>, <0x01da7600 0x1fc>, <0x01da7c00 0x1dc>, @@ -1416,6 +1424,103 @@ }; }; + adreno_gpu: gpu@5000000 { + compatible = "qcom,adreno-540.1", "qcom,adreno"; + reg = <0x05000000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gpucc RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>, + <&gpucc RBCPR_CLK>, + <&gpucc GFX3D_CLK>; + clock-names = "iface", + "rbbmtimer", + "mem", + "mem_iface", + "rbcpr", + "core"; + + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + #stream-id-cells = <16>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-710000097 { + opp-hz = /bits/ 64 <710000097>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-670000048 { + opp-hz = /bits/ 64 <670000048>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-596000097 { + opp-hz = /bits/ 64 <596000097>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-515000097 { + opp-hz = /bits/ 64 <515000097>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x05040000 0x10000>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>; + clock-names = "iface", "mem", "mem_iface"; + + #global-interrupts = <0>; + #iommu-cells = <1>; + interrupts = + , + , + ; + /* + * GPU-GX GDSC's parent is GPU-CX. We need to bring up the + * GPU-CX for SMMU but we need both of them up for Adreno. + * Contemporarily, we also need to manage the VDDMX rpmpd + * domain in the Adreno driver. + * Enable GPU CX/GX GDSCs here so that we can manage the + * SoC VDDMX RPM Power Domain in the Adreno driver. + */ + power-domains = <&gpucc GPU_GX_GDSC>; + status = "disabled"; + }; + gpucc: clock-controller@5065000 { compatible = "qcom,msm8998-gpucc"; #clock-cells = <1>; @@ -1917,6 +2022,11 @@ }; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: spmi@800f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0800f000 0x1000>, @@ -1981,7 +2091,6 @@ compatible = "qcom,msm8998-qmp-usb3-phy"; reg = <0x0c010000 0x18c>; status = "disabled"; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1995,13 +2104,14 @@ <&gcc GCC_USB3PHY_PHY_BCR>; reset-names = "phy", "common"; - usb1_ssphy: lane@c010200 { + usb1_ssphy: phy@c010200 { reg = <0xc010200 0x128>, <0xc010400 0x200>, <0xc010c00 0x20c>, <0xc010600 0x128>, <0xc010800 0x200>; #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2187,7 +2297,7 @@ #size-cells = <0>; }; - blsp2_dma: dma@c184000 { + blsp2_dma: dma-controller@c184000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c184000 0x25000>; interrupts = ; @@ -2330,6 +2440,73 @@ #size-cells = <0>; }; + mmcc: clock-controller@c8c0000 { + compatible = "qcom,mmcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xc8c0000 0x40000>; + status = "disabled"; + + clock-names = "xo", + "gpll0", + "dsi0dsi", + "dsi0byte", + "dsi1dsi", + "dsi1byte", + "hdmipll", + "dplink", + "dpvco", + "core_bi_pll_test_se"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + }; + + mmss_smmu: iommu@cd00000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x0cd00000 0x40000>; + #iommu-cells = <1>; + + clocks = <&mmcc MNOC_AHB_CLK>, + <&mmcc BIMC_SMMU_AHB_CLK>, + <&rpmcc RPM_SMD_MMAXI_CLK>, + <&mmcc BIMC_SMMU_AXI_CLK>; + clock-names = "iface-mm", "iface-smmu", + "bus-mm", "bus-smmu"; + status = "disabled"; + + #global-interrupts = <0>; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + remoteproc_adsp: remoteproc@17300000 { compatible = "qcom,msm8998-adsp-pas"; reg = <0x17300000 0x4040>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index b49860c..3ca2860 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause // Copyright (c) 2019, The Linux Foundation. All rights reserved. +#include #include #include diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi new file mode 100644 index 0000000..c5d8506 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss + */ + +#include + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm6350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6350_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pm6350_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + + pm6350_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm6350_gpios: gpios@c000 { + compatible = "qcom,pm6350-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm6350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index e847d72..d0ef8a1 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -49,9 +49,10 @@ }; pon: pon@800 { - compatible = "qcom,pm8916-pon"; - + compatible = "qcom,pm8998-pon"; reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; pwrkey { compatible = "qcom,pm8941-pwrkey"; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index 05086cb..cfef423 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -72,13 +72,6 @@ interrupt-names = "ovp"; label = "backlight"; - qcom,switching-freq = <800>; - qcom,ovp-millivolt = <29600>; - qcom,current-boost-limit = <970>; - qcom,current-limit-microamp = <20000>; - qcom,num-strings = <2>; - qcom,enabled-strings = <0 1>; - status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index f931cb0..d589024 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -41,6 +41,14 @@ }; }; + pm8916_usbin: extcon@1300 { + compatible = "qcom,pm8941-misc"; + reg = <0x1300>; + interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_vbus"; + status = "disabled"; + }; + pm8916_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; @@ -86,19 +94,17 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; - reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; pm8916_mpps: mpps@a000 { - compatible = "qcom,pm8916-mpp"; + compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp"; reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8916_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; }; pm8916_gpios: gpios@c000 { diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index ad19016..5ab4611 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -119,18 +119,13 @@ }; pm8994_mpps: mpps@a000 { - compatible = "qcom,pm8994-mpp"; + compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp"; reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>, - <0 0xa4 0 IRQ_TYPE_NONE>, - <0 0xa5 0 IRQ_TYPE_NONE>, - <0 0xa6 0 IRQ_TYPE_NONE>, - <0 0xa7 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8994_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index b4ac900..6e7c252 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -38,11 +38,8 @@ reg = <0xd800 0xd900>; interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>; interrupt-names = "short"; - qcom,num-strings = <3>; - /* Yes, all four strings *have to* be defined or things won't work. */ - qcom,enabled-strings = <0 1 2 3>; qcom,cabc; - qcom,eternal-pfet; + qcom,external-pfet; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index d230c51..0fef5f1 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -41,5 +41,17 @@ interrupt-names = "sc-err", "ocp"; }; }; + + pmi8998_wled: leds@d800 { + compatible = "qcom,pmi8998-wled"; + reg = <0xd800 0xd900>; + interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 04fc263..769f972 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -59,6 +59,7 @@ reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; }; pmk8350_gpios: gpio@b000 { diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 339790b..6db753b 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -318,7 +318,7 @@ status = "disabled"; }; - rpm_msg_ram: memory@60000 { + rpm_msg_ram: sram@60000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00060000 0x6000>; }; @@ -719,6 +719,11 @@ reg = <0x01937000 0x25000>; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 28d5b55..845eb7a 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -16,6 +16,8 @@ / { model = "Qualcomm Technologies, Inc. Robotics RB5"; compatible = "qcom,qrb5165-rb5", "qcom,sm8250"; + qcom,msm-id = <455 0x20001>; + qcom,board-id = <11 3>; aliases { serial0 = &uart12; @@ -1222,9 +1224,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5a_0p88>; - vdda-max-microamp = <89900>; vdda-pll-supply = <&vreg_l9a_1p2>; - vdda-pll-max-microamp = <18800>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 5ae2ddc..8756c2b 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -307,6 +307,16 @@ status = "okay"; }; +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sa8155p/adsp.mdt"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sa8155p/cdsp.mdt"; +}; + &uart2 { status = "okay"; }; @@ -328,9 +338,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l8c_1p2>; - vdda-max-microamp = <87100>; vdda-pll-supply = <&vreg_l5a_0p88>; - vdda-pll-max-microamp = <18300>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts index 21b516e..8290d03 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts @@ -23,6 +23,20 @@ status = "disabled"; }; +&pm6150_adc { + status = "disabled"; + + /delete-node/ skin-temp-thermistor@4e; + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + status = "disabled"; + + /delete-node/ charger-thermistor@0; + /delete-node/ skin-temp-thermistor@1; +}; + /* * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature, * which currently is not supported by the PM6150 ADC driver. Disable the diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index a758e4d..14ed09f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -11,6 +11,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" /* Deleted nodes from trogdor.dtsi */ @@ -33,7 +34,7 @@ ap_h1_spi: &spi0 {}; polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; - sustainable-power = <814>; + sustainable-power = <965>; trips { skin_temp_alert0: trip-point0 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts new file mode 100644 index 0000000..db6c2da --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev2)"; + compatible = "google,homestar-rev2","google,homestar-rev23", "qcom,sc7180"; +}; + +&panel { + /delete-property/hpd-gpios; + no-hpd; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts new file mode 100644 index 0000000..3fd8aa5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev3+)"; + compatible = "google,homestar", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi new file mode 100644 index 0000000..4ab890b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -0,0 +1,336 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + max98360a_1: max98360a_1 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_2: max98360a_2 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_3: max98360a_3 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + pp3300_touch: pp3300-touch { + compatible = "regulator-fixed"; + regulator-name = "pp3300_touch"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_touch>; + + vin-supply = <&pp3300_a>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <965>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <55000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <73000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&ap_tp_i2c { + status = "disabled"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@14 { + compatible = "goodix,gt7375p"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_touch>; + }; +}; + +/* Panel controls backlight over aux channel */ + +&backlight { + status = "disabled"; +}; + +&camcc { + status = "okay"; +}; + +&panel { + compatible = "samsung,atna33xc20"; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + /delete-property/ backlight; +}; + +&pm6150_adc { + skin-temp-thermistor@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&secondary_mi2s { + qcom,playback-sd-lines = <0 1>; +}; + +&sound_multimedia1_codec { + sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_HOMESTAR"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +&sec_mi2s_active{ + pinmux { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "mi2s_1"; + }; +}; + +&ts_reset_l { + pinconf { + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "AMP_EN2", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "SEL_LCM", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "AMP_DIN_2", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "VDD_RESET_1.8V", + "ID0", + "", + "ID1", + "AVDD_LCD_EN", + "MIPI_1.8V_EN", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "PP1800_MIPI_SW_EN", + "EN_PP3300_TOUCH", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + en_pp3300_touch: en-pp3300-touch { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 00535aa..8b79fbb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -11,6 +11,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" &ap_sar_sensor { semtech,cs0-ground; @@ -54,6 +55,18 @@ ap_ts_pen_1v8: &i2c4 { compatible = "boe,nv133fhm-n62"; }; +&pm6150_adc { + status = "disabled"; + + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + status = "disabled"; + + /delete-node/ charger-thermistor@0; +}; + &trackpad { interrupts = <58 IRQ_TYPE_EDGE_FALLING>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi index 469aad4..fd4b712 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -17,3 +17,14 @@ firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn", "qcom/sc7180-trogdor/modem/qdsp6sw.mbn"; }; + +&ipa { + status = "okay"; + + /* + * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the + * modem needs to cover certain init steps (GSI init), and + * the AP needs to wait for it. + */ + modem-init; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi new file mode 100644 index 0000000..a3d6954 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for the boards with Parade ps8640 edp bridge + * + * Copyright 2021 Google LLC. + */ + +/ { + pp3300_brij_ps8640: pp3300-brij-ps8640 { + compatible = "regulator-fixed"; + status = "okay"; + regulator-name = "pp3300_brij_ps8640"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_edp_brij_ps8640>; + + vin-supply = <&pp3300_a>; + }; +}; + +&dsi0_out { + remote-endpoint = <&ps8640_in>; +}; + +edp_brij_i2c: &i2c2 { + status = "okay"; + clock-frequency = <400000>; + + ps8640_bridge: bridge@8 { + compatible = "parade,ps8640"; + reg = <0x8>; + + powerdown-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_ps8640_rst>; + + vdd12-supply = <&pp1200_brij>; + vdd33-supply = <&pp3300_brij_ps8640>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + ps8640_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + }; + }; +}; + +&tlmm { + edp_brij_ps8640_rst: edp-brij-ps8640-rst { + pinmux { + pins = "gpio11"; + function = "gpio"; + }; + + pinconf { + pins = "gpio11"; + drive-strength = <2>; + bias-disable; + }; + }; + + en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640 { + pinmux { + pins = "gpio32"; + function = "gpio"; + }; + + pinconf { + pins = "gpio32"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts index e122a6b..76a130b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts @@ -26,6 +26,14 @@ status = "disabled"; }; +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + /delete-node/ charger-thermistor@0; +}; + &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts index 4f32e67..88cf224 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts @@ -22,3 +22,11 @@ &charger_thermal { status = "disabled"; }; + +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + /delete-node/ charger-thermistor@0; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index a246dbd..e90f99e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -11,6 +11,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { thermal-zones { @@ -44,7 +45,7 @@ ap_h1_spi: &spi0 {}; }; &cpu6_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu7_alert0 { @@ -56,7 +57,7 @@ ap_h1_spi: &spi0 {}; }; &cpu7_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu8_alert0 { @@ -68,7 +69,7 @@ ap_h1_spi: &spi0 {}; }; &cpu8_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu9_alert0 { @@ -80,7 +81,7 @@ ap_h1_spi: &spi0 {}; }; &cpu9_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &gpio_keys { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 2b522f9..457c254 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -13,6 +13,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { model = "Google Trogdor (rev1+)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi new file mode 100644 index 0000000..97d5e45 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge + * + * Copyright 2021 Google LLC. + */ + +&dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +edp_brij_i2c: &i2c2 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&pp1800_edp_vpll>; + vccio-supply = <&pp1800_brij_vccio>; + vcca-supply = <&pp1200_brij>; + vcc-supply = <&pp1200_brij>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&tlmm { + edp_brij_irq: edp-brij-irq { + pinmux { + pins = "gpio11"; + function = "gpio"; + }; + + pinconf { + pins = "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 70c88c3..d4f4441 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -601,15 +601,6 @@ &dsi0 { status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; }; &dsi_phy { @@ -617,70 +608,6 @@ vdds-supply = <&vdda_mipi_dsi0_pll>; }; -edp_brij_i2c: &i2c2 { - status = "okay"; - clock-frequency = <400000>; - - sn65dsi86_bridge: bridge@2d { - compatible = "ti,sn65dsi86"; - reg = <0x2d>; - pinctrl-names = "default"; - pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>; - gpio-controller; - #gpio-cells = <2>; - - interrupt-parent = <&tlmm>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; - - enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; - - vpll-supply = <&pp1800_edp_vpll>; - vccio-supply = <&pp1800_brij_vccio>; - vcca-supply = <&pp1200_brij>; - vcc-supply = <&pp1200_brij>; - - clocks = <&rpmhcc RPMH_LN_BB_CLK3>; - clock-names = "refclk"; - - no-hpd; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - sn65dsi86_out: endpoint { - data-lanes = <0 1>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; - - aux-bus { - panel: panel { - /* Compatible will be filled in per-board */ - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; - }; -}; - ap_sar_sensor_i2c: &i2c5 { clock-frequency = <400000>; @@ -750,17 +677,6 @@ hp_i2c: &i2c9 { }; }; -&ipa { - status = "okay"; - - /* - * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the - * modem needs to cover certain init steps (GSI init), and - * the AP needs to wait for it. - */ - modem-init; -}; - &lpass_cpu { status = "okay"; @@ -1244,19 +1160,6 @@ ap_spi_fp: &spi10 { }; }; - edp_brij_irq: edp-brij-irq { - pinmux { - pins = "gpio11"; - function = "gpio"; - }; - - pinconf { - pins = "gpio11"; - drive-strength = <2>; - bias-pull-down; - }; - }; - en_pp3300_codec: en-pp3300-codec { pinmux { pins = "gpio83"; @@ -1523,13 +1426,13 @@ ap_spi_fp: &spi10 { pinconf-cmd { pins = "sdc1_cmd"; bias-pull-up; - drive-strength = <10>; + drive-strength = <16>; }; pinconf-data { pins = "sdc1_data"; bias-pull-up; - drive-strength = <10>; + drive-strength = <16>; }; pinconf-rclk { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index c8921e2..faf8b80 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -137,8 +136,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; @@ -162,8 +161,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -184,8 +183,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -206,8 +205,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -228,8 +227,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -250,8 +249,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -272,8 +271,8 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1740>; - dynamic-power-coefficient = <405>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <480>; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu6_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -294,8 +293,8 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1740>; - dynamic-power-coefficient = <405>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <480>; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu6_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -1922,14 +1921,15 @@ clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd SC7180_CX>, + power-domains = <&rpmhpd SC7180_CX>, <&rpmhpd SC7180_MX>, <&rpmhpd SC7180_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; + power-domain-names = "cx", "mx", "mss"; memory-region = <&mpss_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2647,7 +2647,7 @@ }; qspi: spi@88dc000 { - compatible = "qcom,qspi-v1"; + compatible = "qcom,sc7180-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x600>; #address-cells = <1>; #size-cells = <0>; @@ -3219,12 +3219,16 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sc7180-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts = ; mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -3246,6 +3250,21 @@ cell-index = <0>; }; + imem@146aa000 { + compatible = "simple-mfd"; + reg = <0 0x146aa000 0 0x2000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146aa000 0x2000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sc7180-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -3616,7 +3635,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 1>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu0_alert0: trip-point0 { @@ -3665,7 +3684,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 2>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu1_alert0: trip-point0 { @@ -3714,7 +3733,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 3>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu2_alert0: trip-point0 { @@ -3763,7 +3782,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 4>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu3_alert0: trip-point0 { @@ -3812,7 +3831,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 5>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu4_alert0: trip-point0 { @@ -3861,7 +3880,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 6>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu5_alert0: trip-point0 { @@ -3910,7 +3929,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 9>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu6_alert0: trip-point0 { @@ -3951,7 +3970,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 10>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu7_alert0: trip-point0 { @@ -3992,7 +4011,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 11>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu8_alert0: trip-point0 { @@ -4033,7 +4052,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 12>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu9_alert0: trip-point0 { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts new file mode 100644 index 0000000..7a92679 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine board device tree source + * + * Copyright 2021 Google LLC. + */ + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Herobrine"; + compatible = "google,herobrine", + "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi new file mode 100644 index 0000000..4619fa9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -0,0 +1,1412 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include + +#include "sc7280.dtsi" + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + * + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &sec_apps_mem; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x83600000 0x0 0x800000>; +}; + +/ { + reserved-memory { + adsp_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + camera_mem: memory@8ad00000 { + reg = <0x0 0x8ad00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: memory@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + }; + + aliases { + serial0 = &uart5; + serial1 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_s3: pp5000-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_s3"; + + /* EC turns on with en_pp5000_s3; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_z1: pp3300-z1-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_z1"; + + /* EC turns on with en_pp3300_z1; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_audio: + pp3300_codec: pp3300-codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_codec"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_codec>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_cam: + pp3300_edp: + pp3300_ts: pp3300-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_fp: + pp3300_fp_ls: + pp3300_mcu: pp3300-fp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_fp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-boot-on; + regulator-always-on; + + /* + * WARNING: it is intentional that GPIO 42 isn't listed here. + * The userspace script for updating the fingerprint firmware + * needs to control the FP regulators during a FW update, + * hence the signal can't be owned by the kernel regulator. + */ + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_hub: pp3300-hub-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_hub"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-boot-on; + regulator-always-on; + + gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_hub>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_tp: pp3300-tp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_tp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* AP turns on with PP1800_L18B_S0; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_z1>; + }; + + pp2850_uf_cam: pp2850-uf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp2850_uf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&uf_cam_en>; + + vin-supply = <&pp3300_cam>; + }; + + pp2850_vcm_wf_cam: pp2850-vcm-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp2850_vcm_wf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wf_cam_en>; + + vin-supply = <&pp3300_cam>; + }; + + pp2850_wf_cam: pp2850-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp2850_wf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp3300_cam>; + }; + + pp1800_fp: pp1800-fp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_fp"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + regulator-always-on; + + /* + * WARNING: it is intentional that GPIO 42 isn't listed here. + * The userspace script for updating the fingerprint firmware + * needs to control the FP regulators during a FW update, + * hence the signal can't be owned by the kernel regulator. + */ + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; + + vin-supply = <&pp1800_l18b_s0>; + status = "disabled"; + }; + + pp1800_uf_cam: pp1800-uf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp1800_uf_cam"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&uf_cam_en>; + */ + + vin-supply = <&pp1800_l19b>; + }; + + pp1800_wf_cam: pp1800-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp1800_wf_cam"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp1800_l19b>; + }; + + pp1200_wf_cam: pp1200-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp1200_wf_cam"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp1200_l6b>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_pdct_l>; + + pen_insert: pen-insert { + label = "Pen Insert"; + + /* Insert = low, eject = high */ + gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + wakeup-event-action = ; + wakeup-source; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + status = "disabled"; + keyboard_backlight: keyboard-backlight { + status = "disabled"; + label = "cros_ec::kbd_backlight"; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +&apps_rsc { + pm7325-regulators { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd19_pmu_pcie_i: + vdd19_pmu_rfa_i: + vreg_s1b_wlan: + vreg_s1b: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vdd_pmu_aon_i: + vreg_s7b_wlan: + vreg_s7b: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vdd13_pmu_pcie_i: + vdd13_pmu_rfa_i: + vreg_s8b_wlan: + vreg_s8b: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + }; + + vdda_usb_ss_dp_core: + vreg_l1b: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = ; + }; + + vdda_usb_hs0_3p1: + vreg_l2b: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + pp1200_l6b: + vdd_ufs_1p2: + vdd_vref: + vdda_csi01_1p2: + vdda_csi23_1p2: + vdda_csi4_1p2: + vdda_dsi0_1p2: + vdda_pcie0_1p2: + vdda_pcie1_1p2: + vdda_usb_ss_dp_1p2: + vdda_qlink0_1p2_ck: + vdda_qlink1_1p2_ck: + vreg_l6b_1p2: + vreg_l6b: ldo6 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + regulator-initial-mode = ; + }; + + pp2950_l7b: + vreg_l7b: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + codec_vcc: + pp1800_l18b_s0: + pp1800_ts: + vdd1: + vddpx_0: + vddpx_3: + vddpx_7: + vreg_l18b: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + pp1800_l19b: + vddpx_ts: + vddpx_wl4otp: + vreg_l19b: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vddpx_1: + vreg_s9c: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + pp1800_l1c: + pp1800_pen: + vdd_a_gfx_cs_1p1: + vdd_a_cxo_1p8: + vdd_qfprom: + vdda_apc_cs_1p8: + vdda_qrefs_1p8: + vdda_turing_q6_cs_1p8: + vdda_usb_hs0_1p8: + vreg_l1c: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + dmic_vdd: + pp1800_alc5682: + pp1800_l2c: + pp1800_vreg_alc5682: + vreg_l2c: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + pp3300_sar: + pp3300_sensor: + vreg_l3c: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = ; + }; + + ppvar_uim1: + vddpx_5: + vreg_l4c: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + pp2950_l5c: + uim_vcc: + vddpx_6: + vreg_l5c: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + ppvar_l6c: + vddpx_2: + vreg_l6c: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = ; + }; + + vreg_l7c: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + pp1800_prox: + pp1800_sar: + vreg_l8c: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + pp2950_l9c: + vreg_l9c: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vdd_a_gnss_0p9: + vdd_ufs_core: + vdd_usb_hs0_core: + vdd_vref_0p9: + vdda_csi01_0p9: + vdda_csi23_0p9: + vdda_csi4_0p9: + vdda_dsi0_pll_0p9: + vdda_dsi0_0p9: + vdda_pcie0_core: + vdda_pcie1_core: + vdda_qlink0_0p9: + vdda_qlink1_0p9: + vdda_qlink0_0p9_ck: + vdda_qlink1_0p9_ck: + vdda_qrefs_0p875: + vreg_l10c_0p8: + vreg_l10c: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = ; + }; + + pp2800_l11c: + vreg_l11c: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + pp1800_l12c: + vreg_l12c: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + pp3300_l13c: + vreg_l13c: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; +}; + +ap_tp_i2c: &i2c1 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <102 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ap_h1_i2c: &i2c12 { + status = "okay"; + clock-frequency = <400000>; + + tpm@50 { + compatible = "google,cr50"; + reg = <0x50>; + + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_EDGE_RISING>; + }; +}; + +ap_ts_pen: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <81 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&pm7325_gpios { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pmk8350_gpios { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pmk8350_pon { + status = "disabled"; +}; + +&pmk8350_rtc { + status = "disabled"; +}; + +&pmk8350_vadc { + pmk8350_die_temp { + reg = ; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + pmr735a_die_temp { + reg = ; + label = "pmr735a_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + +&qfprom { + vcc-supply = <&vdd_qfprom>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <37500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + vmmc-supply = <&pp2950_l7b>; + vqmmc-supply = <&pp1800_l19b>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&pp2950_l9c>; + vqmmc-supply = <&ppvar_l6c>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + +ap_ec_spi: &spi8 { + status = "okay"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>; + cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <142 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_ec_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +#include +#include + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vdd_usb_hs0_core>; + vdda33-supply = <&vdda_usb_hs0_3p1>; + vdda18-supply = <&vdda_usb_hs0_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vdd_usb_hs0_core>; + vdda33-supply = <&vdda_usb_hs0_3p1>; + vdda18-supply = <&vdda_usb_hs0_1p8>; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ + +&qspi_cs0 { + bias-disable; +}; + +&qspi_clk { + bias-disable; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&sdc1_on { + clk { + bias-disable; + drive-strength = <16>; + }; + + cmd { + bias-pull-up; + drive-strength = <10>; + }; + + data { + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + bias-pull-down; + }; +}; + +&sdc2_on { + clk { + bias-disable; + drive-strength = <16>; + }; + + cmd { + bias-pull-up; + drive-strength = <10>; + }; + + data { + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio91"; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&pm8350c_gpios { + gpio-line-names = "AP_SUSPEND", + "", + "", + "AP_BL_EN", + "", + "SD_CD_ODL", + "", + "", + "AP_BL_PWM"; + + ap_bl_en: ap-bl-en { + pins = "gpio4"; + function = "normal"; + qcom,drive-strength = ; + bias-disable; + + /* Force backlight to be disabled to match state at boot. */ + output-low; + }; +}; + +&tlmm { + gpio-line-names = "HP_I2C_SDA", /* 0 */ + "HP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "UF_CAM_EN", + "WF_CAM_EN", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + + "", /* 10 */ + "", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "AP_SPI_CLK", + "AP_SPI_CS0_L", + "", + "", + "EDP_HPD", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "EN_PP3300_HUB", + "", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "BT_UART_CTS", + "BT_UART_RTS", + + "BT_UART_TXD", /* 30 */ + "BT_UART_RXD", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "", + "", + "", + "PEN_PDCT_L", + + "IO_BRD_ID0", /* 40 */ + "IO_BRD_ID1", + "EN_FP_RAILS", + "PEN_IRQ_L", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + + "AP_H1_SPI_CLK", /* 50 */ + "AP_H1_SPI_CS_L", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "H1_AP_INT_ODL", + "", + "LCM_RST_1V8_L", + "AMP_EN", + "", + "DP_HOT_PLUG_DET", + + "HUB_RST_L", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "", + "UF_CAM_MCLK", + "WF_CAM_MCLK", + "IO_BRD_ID2", + "EN_PP3300_CODEC", + "EC_IN_RW_ODL", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "WF_CAM_SDA", + "WF_CAM_SCL", + "AP_BRD_ID0", + "AP_BRD_ID1", + "AP_BRD_ID2", + "", + "FPMCU_BOOT0", + "FP_RST_L", + "PE_CLKREQ_ODL", + + "EN_EDP_PP3300", /* 80 */ + "TS_INT_L", + "FORCE_USB_BOOT", + "WCD_RST_L", + "WLAN_EN", + "BT_EN", + "WLAN_SW_CTRL", + "PCIE0_RESET_L", + "PCIE0_CLK_REQ_L", + "PCIE0_WAKE_L", + + "AS_EN", /* 90 */ + "SD_CD_ODL", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "BT_WLAN_SB_CLK", + "BT_WLAN_SB_DATA", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "TP_INT_ODL", + "", + "IO_SKU_ID2", + "TS_RESET_L", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM2_DATA", + + "UIM2_CLK", /* 110 */ + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "RFFE0_CLK", + "RFFE0_DATA/BOOT_CONFIG_0", + "RFFE1_CLK", + + "RFFE1_DATA/BOOT_CONFIG_1", /* 120 */ + "RFFE2_CLK", + "RFFE2_DATA/BOOT_CONFIG_2", + "RFFE3_CLK", + "RFFE3_DATA/BOOT_CONFIG_3", + "RFFE4_CLK", + "RFFE4_DATA", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "IO_SKU_ID0", + + "IO_SKU_ID1", /* 130 */ + "", + "", + "QLINK0_REQ", + "QLINK0_EN", + "QLINK0_WMSS_RESET_L", + "QLINK1_REQ", + "QLINK1_EN", + "QLINK1_WMSS_RESET_L", + "FORCED_USB_BOOT_POL", + + "", /* 140 */ + "P_SENSOR_INT_L", + "AP_EC_INT_L", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA_0", + "WCD_SWR_TX_DATA_1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA_0", + "WCD_SWR_RX_DATA_1", + + "", /* 150 */ + "", + "", + "", + "", + "", + "", + "", + "WCD_SWR_TX_DATA_2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "SENS_UART_TXD", + "SENS_UART_RXD", + "", + "", + ""; + + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default"; + pinctrl-0 = <&bios_flash_wp_l>; + + amp_en: amp-en { + pins = "gpio57"; + function = "gpio"; + bias-pull-down; + }; + + ap_ec_int_l: ap-ec-int-l { + pins = "gpio142"; + input-enable; + bias-pull-up; + }; + + bios_flash_wp_l: bios-flash-wp-l { + pins = "gpio93"; + function = "gpio"; + input-enable; + bias-disable; + }; + + bt_en: bt-en { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + en_fp_rails: en-fp-rails { + pins = "gpio42"; + drive-strength = <2>; + output-high; + bias-disable; + }; + + en_pp3300_codec: en-pp3300-codec { + pins = "gpio67"; + drive-strength = <2>; + bias-disable; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pins = "gpio80"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + en_pp3300_hub: en-pp3300-hub { + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + fp_to_ap_irq_l: fp-to-ap-irq-l { + pins = "gpio61"; + function = "gpio"; + input-enable; + /* Has external pullup */ + bias-disable; + }; + + h1_ap_int_odl: h1-ap-int-odl { + pins = "gpio54"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + hp_irq: hp-irq { + pins = "gpio101"; + function = "gpio"; + bias-pull-up; + }; + + p_sensor_int_l: p-sensor-int-l { + pins = "gpio141"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + pen_irq_l: pen-irq-l { + pins = "gpio43"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + pen_pdct_l: pen-pdct-l { + pins = "gpio39"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high { + pins = "gpio35"; + output-high; + }; + + qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high { + pins = "gpio47"; + output-high; + }; + + qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high { + pins = "gpio51"; + output-high; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + tp_int_odl: tp-int-odl { + pins = "gpio102"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + ts_int_l: ts-int-l { + pins = "gpio81"; + function = "gpio"; + /* Has external pullup */ + bias-pull-up; + }; + + ts_reset_l: ts-reset-l { + pins = "gpio105"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + drive-strength = <2>; + }; + + uf_cam_en: uf-cam-en { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + wf_cam_en: wf-cam-en { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 64fc22a..9b991ba 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -61,6 +61,18 @@ modem-init; }; +&pmk8350_rtc { + status = "okay"; +}; + +&nvme_pwren { + pins = "gpio19"; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>; +}; + &pmk8350_vadc { pmr735a_die_temp { reg = ; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 371a2a9..d623d71 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -7,11 +7,96 @@ #include #include +#include #include "sc7280.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" +/ { + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&key_vol_up_default>; + + volume-up { + label = "volume_up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + nvme_3v3_regulator: nvme-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&nvme_pwren>; + }; +}; + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + * + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &reserved_xbl_uefi_log; +/delete-node/ &sec_apps_mem; + +/* Increase the size from 2.5MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x9c900000 0x0 0x800000>; +}; + +/ { + reserved-memory { + adsp_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + camera_mem: memory@8ad00000 { + reg = <0x0 0x8ad00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: memory@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + }; +}; + &apps_rsc { pm7325-regulators { compatible = "qcom,pm7325-rpmh-regulators"; @@ -199,6 +284,23 @@ modem-init; }; +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&nvme_3v3_regulator>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>; +}; + +&pcie1_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l10c_0p8>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + &pmk8350_vadc { pmk8350_die_temp { reg = ; @@ -207,10 +309,39 @@ }; }; +&qfprom { + vcc-supply = <&vreg_l1c_1p8>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <37500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7280-mss-pil"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + memory-region = <&mba_mem &mpss_mem>; +}; + &sdhc_1 { status = "okay"; @@ -240,6 +371,7 @@ }; &uart5 { + compatible = "qcom,geni-debug-uart"; status = "okay"; }; @@ -282,20 +414,146 @@ vdda18-supply = <&vreg_l1c_1p8>; }; +&uart7 { + status = "okay"; + + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; +}; + /* PINCTRL - additions to nodes defined in sc7280.dtsi */ -&qup_uart5_default { - tx { - pins = "gpio46"; - drive-strength = <2>; +&pm7325_gpios { + key_vol_up_default: key-vol-up-default { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + qcom,drive-strength = <3>; + }; +}; + +&qspi_cs0 { + bias-disable; +}; + +&qspi_clk { + bias-disable; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart7_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&tlmm { + nvme_pwren: nvme-pwren { + function = "gpio"; + }; + + pcie1_reset_n: pcie1-reset-n { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + output-low; bias-disable; }; - rx { - pins = "gpio47"; + pcie1_wake_n: pcie1-wake-n { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; bias-pull-up; }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; }; &sdc1_on { @@ -336,6 +594,7 @@ }; sd-cd { + pins = "gpio91"; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts index 1fc2add..3ae9969 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts @@ -21,3 +21,11 @@ stdout-path = "serial0:115200n8"; }; }; + +&nvme_pwren { + pins = "gpio51"; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index fd78f16..365a2e0 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -5,12 +5,14 @@ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. */ +#include #include +#include #include +#include #include #include #include -#include #include #include #include @@ -26,8 +28,40 @@ chosen { }; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; mmc1 = &sdhc_1; mmc2 = &sdhc_2; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; }; clocks { @@ -49,6 +83,16 @@ #size-cells = <2>; ranges; + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x200000>; + no-map; + }; + aop_mem: memory@80800000 { reg = <0x0 0x80800000 0x0 0x60000>; no-map; @@ -60,6 +104,16 @@ no-map; }; + reserved_xbl_uefi_log: memory@80880000 { + reg = <0x0 0x80884000 0x0 0x10000>; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0x0 0x808ff000 0x0 0x1000>; + no-map; + }; + smem_mem: memory@80900000 { reg = <0x0 0x80900000 0x0 0x200000>; no-map; @@ -70,10 +124,24 @@ reg = <0x0 0x80b00000 0x0 0x100000>; }; + wlan_fw_mem: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0xc00000>; + no-map; + }; + ipa_fw_mem: memory@8b700000 { reg = <0 0x8b700000 0 0x10000>; no-map; }; + + rmtfs_mem: memory@9c900000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9c900000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; }; cpus { @@ -219,6 +287,42 @@ }; }; + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + idle-states { entry-method = "psci"; @@ -415,6 +519,49 @@ method = "smc"; }; + qspi_opp_table: qspi-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -517,1005 +664,2649 @@ qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; - clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; #address-cells = <2>; #size-cells = <2>; ranges; + iommus = <&apps_smmu 0x123 0x0>; status = "disabled"; - uart5: serial@994000 { - compatible = "qcom,geni-debug-uart"; - reg = <0 0x00994000 0 0x4000>; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_uart5_default>; - interrupts = ; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; - }; - cnoc2: interconnect@1500000 { - reg = <0 0x01500000 0 0x1000>; - compatible = "qcom,sc7280-cnoc2"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - cnoc3: interconnect@1502000 { - reg = <0 0x01502000 0 0x1000>; - compatible = "qcom,sc7280-cnoc3"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - mc_virt: interconnect@1580000 { - reg = <0 0x01580000 0 0x4>; - compatible = "qcom,sc7280-mc-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - system_noc: interconnect@1680000 { - reg = <0 0x01680000 0 0x15480>; - compatible = "qcom,sc7280-system-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - aggre1_noc: interconnect@16e0000 { - compatible = "qcom,sc7280-aggre1-noc"; - reg = <0 0x016e0000 0 0x1c080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + uart1: serial@984000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - aggre2_noc: interconnect@1700000 { - reg = <0 0x01700000 0 0x2b080>; - compatible = "qcom,sc7280-aggre2-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - mmss_noc: interconnect@1740000 { - reg = <0 0x01740000 0 0x1e080>; - compatible = "qcom,sc7280-mmss-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - ipa: ipa@1e40000 { - compatible = "qcom,sc7280-ipa"; + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - iommus = <&apps_smmu 0x480 0x0>, - <&apps_smmu 0x482 0x0>; - reg = <0 0x1e40000 0 0x8000>, - <0 0x1e50000 0 0x4ad0>, - <0 0x1e04000 0 0x23000>; - reg-names = "ipa-reg", - "ipa-shared", - "gsi"; + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - interrupts-extended = <&intc 0 654 IRQ_TYPE_EDGE_RISING>, - <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, - <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ipa", - "gsi", - "ipa-clock-query", - "ipa-setup-ready"; + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - clocks = <&rpmhcc RPMH_IPA_CLK>; - clock-names = "core"; + uart3: serial@98c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>; - interconnect-names = "memory", - "config"; + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - qcom,smem-states = <&ipa_smp2p_out 0>, - <&ipa_smp2p_out 1>; - qcom,smem-state-names = "ipa-clock-enabled-valid", - "ipa-clock-enabled"; + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - status = "disabled"; - }; + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex", "syscon"; - reg = <0 0x01f40000 0 0x40000>; - #hwlock-cells = <1>; - }; + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - lpasscc: lpasscc@3000000 { - compatible = "qcom,sc7280-lpasscc"; - reg = <0 0x03000000 0 0x40>, - <0 0x03c04000 0 0x4>, - <0 0x03389000 0 0x24>; - reg-names = "qdsp6ss", "top_cc", "cc"; - clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; - clock-names = "iface"; - #clock-cells = <1>; - }; + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - lpass_ag_noc: interconnect@3c40000 { - reg = <0 0x03c40000 0 0xf080>; - compatible = "qcom,sc7280-lpass-ag-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + uart5: serial@994000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - gpucc: clock-controller@3d90000 { - compatible = "qcom,sc7280-gpucc"; - reg = <0 0x03d90000 0 0x9000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_GPU_GPLL0_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; - clock-names = "bi_tcxo", - "gcc_gpu_gpll0_clk_src", - "gcc_gpu_gpll0_div_clk_src"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - stm@6002000 { - compatible = "arm,coresight-stm", "arm,primecell"; - reg = <0 0x06002000 0 0x1000>, - <0 0x16280000 0 0x180000>; - reg-names = "stm-base", "stm-stimulus-base"; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - stm_out: endpoint { - remote-endpoint = <&funnel0_in7>; - }; - }; + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; }; - }; - funnel@6041000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06041000 0 0x1000>; + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - out-ports { - port { - funnel0_out: endpoint { - remote-endpoint = <&merge_funnel_in0>; - }; - }; + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; }; - in-ports { + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - port@7 { - reg = <7>; - funnel0_in7: endpoint { - remote-endpoint = <&stm_out>; - }; - }; + uart7: serial@99c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; }; }; - funnel@6042000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06042000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; - out-ports { - port { - funnel1_out: endpoint { - remote-endpoint = <&merge_funnel_in1>; - }; - }; + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; }; - in-ports { + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - port@4 { - reg = <4>; - funnel1_in4: endpoint { - remote-endpoint = <&apss_merge_funnel_out>; - }; - }; + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; }; - }; - funnel@6045000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06045000 0 0x1000>; + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - out-ports { - port { - merge_funnel_out: endpoint { - remote-endpoint = <&swao_funnel_in>; - }; - }; + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; }; - in-ports { + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - port@0 { - reg = <0>; - merge_funnel_in0: endpoint { - remote-endpoint = <&funnel0_out>; - }; - }; - - port@1 { - reg = <1>; - merge_funnel_in1: endpoint { - remote-endpoint = <&funnel1_out>; - }; - }; + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; }; - }; - replicator@6046000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0 0x06046000 0 0x1000>; + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - out-ports { - port { - replicator_out: endpoint { - remote-endpoint = <&etr_in>; - }; - }; + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; }; - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&swao_replicator_out>; - }; - }; + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; }; - }; - etr@6048000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0 0x06048000 0 0x1000>; - iommus = <&apps_smmu 0x04c0 0>; + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,scatter-gather; + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - in-ports { - port { - etr_in: endpoint { - remote-endpoint = <&replicator_out>; - }; - }; + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; }; - }; - funnel@6b04000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06b04000 0 0x1000>; + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; - out-ports { - port { - swao_funnel_out: endpoint { - remote-endpoint = <&etf_in>; - }; - }; + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; }; - in-ports { + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; - port@7 { - reg = <7>; - swao_funnel_in: endpoint { - remote-endpoint = <&merge_funnel_out>; - }; + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + cnoc2: interconnect@1500000 { + reg = <0 0x01500000 0 0x1000>; + compatible = "qcom,sc7280-cnoc2"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + cnoc3: interconnect@1502000 { + reg = <0 0x01502000 0 0x1000>; + compatible = "qcom,sc7280-cnoc3"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1580000 { + reg = <0 0x01580000 0 0x4>; + compatible = "qcom,sc7280-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + reg = <0 0x01680000 0 0x15480>; + compatible = "qcom,sc7280-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sc7280-aggre1-noc"; + reg = <0 0x016e0000 0 0x1c080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + reg = <0 0x01700000 0 0x2b080>; + compatible = "qcom,sc7280-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + reg = <0 0x01740000 0 0x1e080>; + compatible = "qcom,sc7280-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sc7280"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane 0>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_CLK>; + + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc GCC_PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_n>; + + iommus = <&apps_smmu 0x1c80 0x1>; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: lanes@1c0e200 { + reg = <0 0x01c0e200 0 0x170>, + <0 0x01c0e400 0 0x200>, + <0 0x01c0ea00 0 0x1f0>, + <0 0x01c0e600 0 0x170>, + <0 0x01c0e800 0 0x200>, + <0 0x01c0ee00 0 0xf4>; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + #clock-cells = <1>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + ipa: ipa@1e40000 { + compatible = "qcom,sc7280-ipa"; + + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x482 0x0>; + reg = <0 0x1e40000 0 0x8000>, + <0 0x1e50000 0 0x4ad0>, + <0 0x1e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex", "syscon"; + reg = <0 0x01f40000 0 0x40000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1fc0000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + }; + + lpasscc: lpasscc@3000000 { + compatible = "qcom,sc7280-lpasscc"; + reg = <0 0x03000000 0 0x40>, + <0 0x03c04000 0 0x4>, + <0 0x03389000 0 0x24>; + reg-names = "qdsp6ss", "top_cc", "cc"; + clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; + clock-names = "iface"; + #clock-cells = <1>; + }; + + lpass_ag_noc: interconnect@3c40000 { + reg = <0 0x03c40000 0 0xf080>; + compatible = "qcom,sc7280-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gpu: gpu@3d00000 { + compatible = "qcom,adreno-635.0", "qcom,adreno"; + #stream-id-cells = <16>; + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = ; + iommus = <&adreno_smmu 0 0x401>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = ; + opp-peak-kBps = <1804000>; + }; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-level = ; + opp-peak-kBps = <4068000>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = ; + opp-peak-kBps = <6832000>; }; }; }; - etf@6b05000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0 0x06b05000 0 0x1000>; + gmu: gmu@3d69000 { + compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x3de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc 5>, + <&gpucc 8>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc 2>, + <&gpucc 15>, + <&gpucc 11>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc 0>, + <&gpucc 1>; + power-domain-names = "cx", + "gx"; + iommus = <&adreno_smmu 5 0x400>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sc7280-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc 2>, + <&gpucc 11>, + <&gpucc 5>, + <&gpucc 15>, + <&gpucc 13>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc 0>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7280-mpss-pas"; + reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_OFFLINE_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&rpmhcc RPMH_PKA_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "offline", "snoc_axi", "pka", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MSS>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>; + qcom,ext-regs = <&tcsr 0x10000 0x10004 &tcsr_mutex 0x26004 0x26008>; + qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { - etf_out: endpoint { - remote-endpoint = <&swao_replicator_in>; + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; }; }; }; + }; - in-ports { + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { port { - etf_in: endpoint { - remote-endpoint = <&swao_funnel_out>; + funnel0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; }; }; }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06042000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&swao_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&swao_replicator_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x04c0 0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out>; + }; + }; + }; + }; + + funnel@6b04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06b04000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + swao_funnel_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + }; + + etf@6b05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06b05000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&swao_replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&swao_funnel_out>; + }; + }; + }; + }; + + replicator@6b06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06b06000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + qcom,replicator-loses-context; + + out-ports { + port { + swao_replicator_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + + in-ports { + port { + swao_replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = <&funnel1_in4>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = <&apss_funnel_out>; + }; + }; + }; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + status = "disabled"; + + reg = <0 0x08804000 0 0x1000>; + + iommus = <&apps_smmu 0x100 0x0>; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "core", "iface", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + bus-width = <4>; + + qcom,dll-config = <0x0007642c>; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sc7280-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sc7280-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sc7280-qmp-usb3-dp-phy", + "qcom,sm8250-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x40>, + <0 0x088ea000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #phy-cells = <0>; + #clock-cells = <1>; + }; + }; + + usb_2: usb@8cf8800 { + compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; + reg = <0 0x08cf8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface","mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 13 IRQ_TYPE_EDGE_RISING>, + <&pdc 12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc GCC_USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_2_dwc3: usb@8c00000 { + compatible = "snps,dwc3"; + reg = <0 0x08c00000 0 0xe000>; + interrupts = ; + iommus = <&apps_smmu 0xa0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + }; + }; + + qspi: spi@88dc000 { + compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; + reg = <0 0x088dc000 0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &cnoc2 SLAVE_QSPI_0 0>; + interconnect-names = "qspi-config"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qspi_opp_table>; + status = "disabled"; + }; + + dc_noc: interconnect@90e0000 { + reg = <0 0x090e0000 0 0x5080>; + compatible = "qcom,sc7280-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + reg = <0 0x9100000 0 0xe2200>; + compatible = "qcom,sc7280-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc7280-llcc"; + reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = ; + }; + + nsp_noc: interconnect@a0c0000 { + reg = <0 0x0a0c0000 0 0x10000>; + compatible = "qcom,sc7280-nsp-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xe000>; + interrupts = ; + iommus = <&apps_smmu 0xe0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + }; + }; + + videocc: clock-controller@aaf0000 { + compatible = "qcom,sc7280-videocc"; + reg = <0 0xaaf0000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + clock-names = "bi_tcxo", "bi_tcxo_ao"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sc7280-dispcc"; + reg = <0 0xaf00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <0>, <0>, <0>, <0>, <0>, <0>; + clock-names = "bi_tcxo", "gcc_disp_gpll0_clk", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc7280-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, + <55 306 4>, <59 312 3>, <62 374 2>, + <64 434 2>, <66 438 3>, <69 86 1>, + <70 520 54>, <124 609 31>, <155 63 1>, + <156 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + pdc_reset: reset-controller@b5e0000 { + compatible = "qcom,sc7280-pdc-global"; + reg = <0 0x0b5e0000 0 0x20000>; + #reset-cells = <1>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <15>; + interrupts = , + ; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; }; - replicator@6b06000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0 0x06b06000 0 0x1000>; + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <12>; + interrupts = , + ; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - qcom,replicator-loses-context; + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc"; + reg = <0 0x0c2a0000 0 0x31000>; + #reset-cells = <1>; + }; - out-ports { - port { - swao_replicator_out: endpoint { - remote-endpoint = <&replicator_in>; - }; - }; - }; + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc7280-aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP>; - in-ports { - port { - swao_replicator_in: endpoint { - remote-endpoint = <&etf_out>; - }; - }; - }; + #clock-cells = <0>; }; - etm@7040000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07040000 0 0x1000>; + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; - cpu = <&CPU0>; + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <4>; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; + tlmm: pinctrl@f100000 { + compatible = "qcom,sc7280-pinctrl"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + wakeup-parent = <&pdc>; - out-ports { - port { - etm0_out: endpoint { - remote-endpoint = <&apss_funnel_in0>; - }; - }; + pcie1_clkreq_n: pcie1-clkreq-n { + pins = "gpio79"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; }; - }; - etm@7140000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07140000 0 0x1000>; + qspi_clk: qspi-clk { + pins = "gpio14"; + function = "qspi_clk"; + }; - cpu = <&CPU1>; + qspi_cs0: qspi-cs0 { + pins = "gpio15"; + function = "qspi_cs"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; + qspi_cs1: qspi-cs1 { + pins = "gpio19"; + function = "qspi_cs"; + }; - out-ports { - port { - etm1_out: endpoint { - remote-endpoint = <&apss_funnel_in1>; - }; - }; + qspi_data01: qspi-data01 { + pins = "gpio12", "gpio13"; + function = "qspi_data"; }; - }; - etm@7240000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07240000 0 0x1000>; + qspi_data12: qspi-data12 { + pins = "gpio16", "gpio17"; + function = "qspi_data"; + }; - cpu = <&CPU2>; + qup_i2c0_data_clk: qup-i2c0-data-clk { + pins = "gpio0", "gpio1"; + function = "qup00"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; + qup_i2c1_data_clk: qup-i2c1-data-clk { + pins = "gpio4", "gpio5"; + function = "qup01"; + }; - out-ports { - port { - etm2_out: endpoint { - remote-endpoint = <&apss_funnel_in2>; - }; - }; + qup_i2c2_data_clk: qup-i2c2-data-clk { + pins = "gpio8", "gpio9"; + function = "qup02"; }; - }; - etm@7340000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07340000 0 0x1000>; + qup_i2c3_data_clk: qup-i2c3-data-clk { + pins = "gpio12", "gpio13"; + function = "qup03"; + }; - cpu = <&CPU3>; + qup_i2c4_data_clk: qup-i2c4-data-clk { + pins = "gpio16", "gpio17"; + function = "qup04"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; + qup_i2c5_data_clk: qup-i2c5-data-clk { + pins = "gpio20", "gpio21"; + function = "qup05"; + }; - out-ports { - port { - etm3_out: endpoint { - remote-endpoint = <&apss_funnel_in3>; - }; - }; + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio24", "gpio25"; + function = "qup06"; }; - }; - etm@7440000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07440000 0 0x1000>; + qup_i2c7_data_clk: qup-i2c7-data-clk { + pins = "gpio28", "gpio29"; + function = "qup07"; + }; - cpu = <&CPU4>; + qup_i2c8_data_clk: qup-i2c8-data-clk { + pins = "gpio32", "gpio33"; + function = "qup10"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; + qup_i2c9_data_clk: qup-i2c9-data-clk { + pins = "gpio36", "gpio37"; + function = "qup11"; + }; - out-ports { - port { - etm4_out: endpoint { - remote-endpoint = <&apss_funnel_in4>; - }; - }; + qup_i2c10_data_clk: qup-i2c10-data-clk { + pins = "gpio40", "gpio41"; + function = "qup12"; }; - }; - etm@7540000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07540000 0 0x1000>; + qup_i2c11_data_clk: qup-i2c11-data-clk { + pins = "gpio44", "gpio45"; + function = "qup13"; + }; - cpu = <&CPU5>; + qup_i2c12_data_clk: qup-i2c12-data-clk { + pins = "gpio48", "gpio49"; + function = "qup14"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio52", "gpio53"; + function = "qup15"; + }; - out-ports { - port { - etm5_out: endpoint { - remote-endpoint = <&apss_funnel_in5>; - }; - }; + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio56", "gpio57"; + function = "qup16"; }; - }; - etm@7640000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07640000 0 0x1000>; + qup_i2c15_data_clk: qup-i2c15-data-clk { + pins = "gpio60", "gpio61"; + function = "qup17"; + }; - cpu = <&CPU6>; + qup_spi0_data_clk: qup-spi0-data-clk { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup00"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; + qup_spi0_cs: qup-spi0-cs { + pins = "gpio3"; + function = "qup00"; + }; - out-ports { - port { - etm6_out: endpoint { - remote-endpoint = <&apss_funnel_in6>; - }; - }; + qup_spi0_cs_gpio: qup-spi0-cs-gpio { + pins = "gpio3"; + function = "gpio"; }; - }; - etm@7740000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07740000 0 0x1000>; + qup_spi1_data_clk: qup-spi1-data-clk { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup01"; + }; - cpu = <&CPU7>; + qup_spi1_cs: qup-spi1-cs { + pins = "gpio7"; + function = "qup01"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; + qup_spi1_cs_gpio: qup-spi1-cs-gpio { + pins = "gpio7"; + function = "gpio"; + }; - out-ports { - port { - etm7_out: endpoint { - remote-endpoint = <&apss_funnel_in7>; - }; - }; + qup_spi2_data_clk: qup-spi2-data-clk { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup02"; }; - }; - funnel@7800000 { /* APSS Funnel */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x07800000 0 0x1000>; + qup_spi2_cs: qup-spi2-cs { + pins = "gpio11"; + function = "qup02"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; + qup_spi2_cs_gpio: qup-spi2-cs-gpio { + pins = "gpio11"; + function = "gpio"; + }; - out-ports { - port { - apss_funnel_out: endpoint { - remote-endpoint = <&apss_merge_funnel_in>; - }; - }; + qup_spi3_data_clk: qup-spi3-data-clk { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup03"; }; - in-ports { - #address-cells = <1>; - #size-cells = <0>; + qup_spi3_cs: qup-spi3-cs { + pins = "gpio15"; + function = "qup03"; + }; - port@0 { - reg = <0>; - apss_funnel_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; + qup_spi3_cs_gpio: qup-spi3-cs-gpio { + pins = "gpio15"; + function = "gpio"; + }; - port@1 { - reg = <1>; - apss_funnel_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; + qup_spi4_data_clk: qup-spi4-data-clk { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup04"; + }; - port@2 { - reg = <2>; - apss_funnel_in2: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; + qup_spi4_cs: qup-spi4-cs { + pins = "gpio19"; + function = "qup04"; + }; + + qup_spi4_cs_gpio: qup-spi4-cs-gpio { + pins = "gpio19"; + function = "gpio"; + }; - port@3 { - reg = <3>; - apss_funnel_in3: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; + qup_spi5_data_clk: qup-spi5-data-clk { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup05"; + }; - port@4 { - reg = <4>; - apss_funnel_in4: endpoint { - remote-endpoint = <&etm4_out>; - }; - }; + qup_spi5_cs: qup-spi5-cs { + pins = "gpio23"; + function = "qup05"; + }; - port@5 { - reg = <5>; - apss_funnel_in5: endpoint { - remote-endpoint = <&etm5_out>; - }; - }; + qup_spi5_cs_gpio: qup-spi5-cs-gpio { + pins = "gpio23"; + function = "gpio"; + }; - port@6 { - reg = <6>; - apss_funnel_in6: endpoint { - remote-endpoint = <&etm6_out>; - }; - }; + qup_spi6_data_clk: qup-spi6-data-clk { + pins = "gpio24", "gpio25", "gpio26"; + function = "qup06"; + }; - port@7 { - reg = <7>; - apss_funnel_in7: endpoint { - remote-endpoint = <&etm7_out>; - }; - }; + qup_spi6_cs: qup-spi6-cs { + pins = "gpio27"; + function = "qup06"; }; - }; - funnel@7810000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x07810000 0 0x1000>; + qup_spi6_cs_gpio: qup-spi6-cs-gpio { + pins = "gpio27"; + function = "gpio"; + }; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; + qup_spi7_data_clk: qup-spi7-data-clk { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup07"; + }; - out-ports { - port { - apss_merge_funnel_out: endpoint { - remote-endpoint = <&funnel1_in4>; - }; - }; + qup_spi7_cs: qup-spi7-cs { + pins = "gpio31"; + function = "qup07"; }; - in-ports { - port { - apss_merge_funnel_in: endpoint { - remote-endpoint = <&apss_funnel_out>; - }; - }; + qup_spi7_cs_gpio: qup-spi7-cs-gpio { + pins = "gpio31"; + function = "gpio"; }; - }; - sdhc_2: sdhci@8804000 { - compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; - status = "disabled"; + qup_spi8_data_clk: qup-spi8-data-clk { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup10"; + }; - reg = <0 0x08804000 0 0x1000>; + qup_spi8_cs: qup-spi8-cs { + pins = "gpio35"; + function = "qup10"; + }; - iommus = <&apps_smmu 0x100 0x0>; - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; + qup_spi8_cs_gpio: qup-spi8-cs-gpio { + pins = "gpio35"; + function = "gpio"; + }; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "core", "iface", "xo"; - interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; - interconnect-names = "sdhc-ddr","cpu-sdhc"; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&sdhc2_opp_table>; + qup_spi9_data_clk: qup-spi9-data-clk { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup11"; + }; - bus-width = <4>; + qup_spi9_cs: qup-spi9-cs { + pins = "gpio39"; + function = "qup11"; + }; - qcom,dll-config = <0x0007642c>; + qup_spi9_cs_gpio: qup-spi9-cs-gpio { + pins = "gpio39"; + function = "gpio"; + }; - sdhc2_opp_table: opp-table { - compatible = "operating-points-v2"; + qup_spi10_data_clk: qup-spi10-data-clk { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup12"; + }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_low_svs>; - opp-peak-kBps = <1800000 400000>; - opp-avg-kBps = <100000 0>; - }; + qup_spi10_cs: qup-spi10-cs { + pins = "gpio43"; + function = "qup12"; + }; - opp-202000000 { - opp-hz = /bits/ 64 <202000000>; - required-opps = <&rpmhpd_opp_nom>; - opp-peak-kBps = <5400000 1600000>; - opp-avg-kBps = <200000 0>; - }; + qup_spi10_cs_gpio: qup-spi10-cs-gpio { + pins = "gpio43"; + function = "gpio"; }; - }; + qup_spi11_data_clk: qup-spi11-data-clk { + pins = "gpio44", "gpio45", "gpio46"; + function = "qup13"; + }; - usb_1_hsphy: phy@88e3000 { - compatible = "qcom,sc7280-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0 0x088e3000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; + qup_spi11_cs: qup-spi11-cs { + pins = "gpio47"; + function = "qup13"; + }; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; + qup_spi11_cs_gpio: qup-spi11-cs-gpio { + pins = "gpio47"; + function = "gpio"; + }; - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - }; + qup_spi12_data_clk: qup-spi12-data-clk { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup14"; + }; - usb_2_hsphy: phy@88e4000 { - compatible = "qcom,sc7280-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0 0x088e4000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; + qup_spi12_cs: qup-spi12-cs { + pins = "gpio51"; + function = "qup14"; + }; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; + qup_spi12_cs_gpio: qup-spi12-cs-gpio { + pins = "gpio51"; + function = "gpio"; + }; - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; - }; + qup_spi13_data_clk: qup-spi13-data-clk { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup15"; + }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sc7280-qmp-usb3-dp-phy", - "qcom,sm8250-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x40>, - <0 0x088ea000 0 0x200>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + qup_spi13_cs: qup-spi13-cs { + pins = "gpio55"; + function = "qup15"; + }; - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + qup_spi13_cs_gpio: qup-spi13-cs-gpio { + pins = "gpio55"; + function = "gpio"; + }; - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; - reset-names = "phy", "common"; + qup_spi14_data_clk: qup-spi14-data-clk { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup16"; + }; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; + qup_spi14_cs: qup-spi14-cs { + pins = "gpio59"; + function = "qup16"; }; - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eac00 0 0x400>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>, - <0 0x088eaa00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; + qup_spi14_cs_gpio: qup-spi14-cs-gpio { + pins = "gpio59"; + function = "gpio"; }; - }; - usb_2: usb@8cf8800 { - compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; - reg = <0 0x08cf8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - dma-ranges; + qup_spi15_data_clk: qup-spi15-data-clk { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup17"; + }; - clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface","mock_utmi", - "sleep"; + qup_spi15_cs: qup-spi15-cs { + pins = "gpio63"; + function = "qup17"; + }; - assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; + qup_spi15_cs_gpio: qup-spi15-cs-gpio { + pins = "gpio63"; + function = "gpio"; + }; - interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 13 IRQ_TYPE_EDGE_RISING>, - <&pdc 12 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "hs_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + qup_uart0_cts: qup-uart0-cts { + pins = "gpio0"; + function = "qup00"; + }; - power-domains = <&gcc GCC_USB30_SEC_GDSC>; + qup_uart0_rts: qup-uart0-rts { + pins = "gpio1"; + function = "qup00"; + }; - resets = <&gcc GCC_USB30_SEC_BCR>; + qup_uart0_tx: qup-uart0-tx { + pins = "gpio2"; + function = "qup00"; + }; - interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>; - interconnect-names = "usb-ddr", "apps-usb"; + qup_uart0_rx: qup-uart0-rx { + pins = "gpio3"; + function = "qup00"; + }; - usb_2_dwc3: usb@8c00000 { - compatible = "snps,dwc3"; - reg = <0 0x08c00000 0 0xe000>; - interrupts = ; - iommus = <&apps_smmu 0xa0 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; + qup_uart1_cts: qup-uart1-cts { + pins = "gpio4"; + function = "qup01"; }; - }; - dc_noc: interconnect@90e0000 { - reg = <0 0x090e0000 0 0x5080>; - compatible = "qcom,sc7280-dc-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + qup_uart1_rts: qup-uart1-rts { + pins = "gpio5"; + function = "qup01"; + }; - gem_noc: interconnect@9100000 { - reg = <0 0x9100000 0 0xe2200>; - compatible = "qcom,sc7280-gem-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + qup_uart1_tx: qup-uart1-tx { + pins = "gpio6"; + function = "qup01"; + }; - system-cache-controller@9200000 { - compatible = "qcom,sc7280-llcc"; - reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; - interrupts = ; - }; + qup_uart1_rx: qup-uart1-rx { + pins = "gpio7"; + function = "qup01"; + }; - nsp_noc: interconnect@a0c0000 { - reg = <0 0x0a0c0000 0 0x10000>; - compatible = "qcom,sc7280-nsp-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + qup_uart2_cts: qup-uart2-cts { + pins = "gpio8"; + function = "qup02"; + }; - usb_1: usb@a6f8800 { - compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; - reg = <0 0x0a6f8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - dma-ranges; + qup_uart2_rts: qup-uart2-rts { + pins = "gpio9"; + function = "qup02"; + }; + + qup_uart2_tx: qup-uart2-tx { + pins = "gpio10"; + function = "qup02"; + }; + + qup_uart2_rx: qup-uart2-rx { + pins = "gpio11"; + function = "qup02"; + }; - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + qup_uart3_cts: qup-uart3-cts { + pins = "gpio12"; + function = "qup03"; + }; - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; + qup_uart3_rts: qup-uart3-rts { + pins = "gpio13"; + function = "qup03"; + }; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, - <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + qup_uart3_tx: qup-uart3-tx { + pins = "gpio14"; + function = "qup03"; + }; - power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + qup_uart3_rx: qup-uart3-rx { + pins = "gpio15"; + function = "qup03"; + }; - resets = <&gcc GCC_USB30_PRIM_BCR>; + qup_uart4_cts: qup-uart4-cts { + pins = "gpio16"; + function = "qup04"; + }; - interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>; - interconnect-names = "usb-ddr", "apps-usb"; + qup_uart4_rts: qup-uart4-rts { + pins = "gpio17"; + function = "qup04"; + }; - usb_1_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0 0x0a600000 0 0xe000>; - interrupts = ; - iommus = <&apps_smmu 0xe0 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; - maximum-speed = "super-speed"; + qup_uart4_tx: qup-uart4-tx { + pins = "gpio18"; + function = "qup04"; }; - }; - videocc: clock-controller@aaf0000 { - compatible = "qcom,sc7280-videocc"; - reg = <0 0xaaf0000 0 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>; - clock-names = "bi_tcxo", "bi_tcxo_ao"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; + qup_uart4_rx: qup-uart4-rx { + pins = "gpio19"; + function = "qup04"; + }; - dispcc: clock-controller@af00000 { - compatible = "qcom,sc7280-dispcc"; - reg = <0 0xaf00000 0 0x20000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_DISP_GPLL0_CLK_SRC>, - <0>, <0>, <0>, <0>, <0>, <0>; - clock-names = "bi_tcxo", "gcc_disp_gpll0_clk", - "dsi0_phy_pll_out_byteclk", - "dsi0_phy_pll_out_dsiclk", - "dp_phy_pll_link_clk", - "dp_phy_pll_vco_div_clk", - "edp_phy_pll_link_clk", - "edp_phy_pll_vco_div_clk"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; + qup_uart5_cts: qup-uart5-cts { + pins = "gpio20"; + function = "qup05"; + }; - pdc: interrupt-controller@b220000 { - compatible = "qcom,sc7280-pdc", "qcom,pdc"; - reg = <0 0x0b220000 0 0x30000>; - qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, - <55 306 4>, <59 312 3>, <62 374 2>, - <64 434 2>, <66 438 3>, <69 86 1>, - <70 520 54>, <124 609 31>, <155 63 1>, - <156 716 12>; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupt-controller; - }; + qup_uart5_rts: qup-uart5-rts { + pins = "gpio21"; + function = "qup05"; + }; - pdc_reset: reset-controller@b5e0000 { - compatible = "qcom,sc7280-pdc-global"; - reg = <0 0x0b5e0000 0 0x20000>; - #reset-cells = <1>; - }; + qup_uart5_tx: qup-uart5-tx { + pins = "gpio22"; + function = "qup05"; + }; - tsens0: thermal-sensor@c263000 { - compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; - reg = <0 0x0c263000 0 0x1ff>, /* TM */ - <0 0x0c222000 0 0x1ff>; /* SROT */ - #qcom,sensors = <15>; - interrupts = , - ; - interrupt-names = "uplow","critical"; - #thermal-sensor-cells = <1>; - }; + qup_uart5_rx: qup-uart5-rx { + pins = "gpio23"; + function = "qup05"; + }; - tsens1: thermal-sensor@c265000 { - compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; - reg = <0 0x0c265000 0 0x1ff>, /* TM */ - <0 0x0c223000 0 0x1ff>; /* SROT */ - #qcom,sensors = <12>; - interrupts = , - ; - interrupt-names = "uplow","critical"; - #thermal-sensor-cells = <1>; - }; + qup_uart6_cts: qup-uart6-cts { + pins = "gpio24"; + function = "qup06"; + }; - aoss_reset: reset-controller@c2a0000 { - compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc"; - reg = <0 0x0c2a0000 0 0x31000>; - #reset-cells = <1>; - }; + qup_uart6_rts: qup-uart6-rts { + pins = "gpio25"; + function = "qup06"; + }; - aoss_qmp: power-controller@c300000 { - compatible = "qcom,sc7280-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; - interrupts-extended = <&ipcc IPCC_CLIENT_AOP - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_AOP - IPCC_MPROC_SIGNAL_GLINK_QMP>; + qup_uart6_tx: qup-uart6-tx { + pins = "gpio26"; + function = "qup06"; + }; - #clock-cells = <0>; - #power-domain-cells = <1>; - }; + qup_uart6_rx: qup-uart6-rx { + pins = "gpio27"; + function = "qup06"; + }; - spmi_bus: spmi@c440000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0 0x0c440000 0 0x1100>, - <0 0x0c600000 0 0x2000000>, - <0 0x0e600000 0 0x100000>, - <0 0x0e700000 0 0xa0000>, - <0 0x0c40a000 0 0x26000>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <1>; - #size-cells = <1>; - interrupt-controller; - #interrupt-cells = <4>; - }; + qup_uart7_cts: qup-uart7-cts { + pins = "gpio28"; + function = "qup07"; + }; - tlmm: pinctrl@f100000 { - compatible = "qcom,sc7280-pinctrl"; - reg = <0 0x0f100000 0 0x300000>; - interrupts = ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 175>; - wakeup-parent = <&pdc>; + qup_uart7_rts: qup-uart7-rts { + pins = "gpio29"; + function = "qup07"; + }; - qup_uart5_default: qup-uart5-default { - pins = "gpio46", "gpio47"; - function = "qup13"; + qup_uart7_tx: qup-uart7-tx { + pins = "gpio30"; + function = "qup07"; + }; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio31"; + function = "qup07"; }; sdc1_on: sdc1-on { @@ -1573,10 +3364,6 @@ data { pins = "sdc2_data"; }; - - sd-cd { - pins = "gpio91"; - }; }; sdc2_off: sdc2-off { @@ -1598,6 +3385,181 @@ bias-bus-hold; }; }; + + qup_uart8_cts: qup-uart8-cts { + pins = "gpio32"; + function = "qup10"; + }; + + qup_uart8_rts: qup-uart8-rts { + pins = "gpio33"; + function = "qup10"; + }; + + qup_uart8_tx: qup-uart8-tx { + pins = "gpio34"; + function = "qup10"; + }; + + qup_uart8_rx: qup-uart8-rx { + pins = "gpio35"; + function = "qup10"; + }; + + qup_uart9_cts: qup-uart9-cts { + pins = "gpio36"; + function = "qup11"; + }; + + qup_uart9_rts: qup-uart9-rts { + pins = "gpio37"; + function = "qup11"; + }; + + qup_uart9_tx: qup-uart9-tx { + pins = "gpio38"; + function = "qup11"; + }; + + qup_uart9_rx: qup-uart9-rx { + pins = "gpio39"; + function = "qup11"; + }; + + qup_uart10_cts: qup-uart10-cts { + pins = "gpio40"; + function = "qup12"; + }; + + qup_uart10_rts: qup-uart10-rts { + pins = "gpio41"; + function = "qup12"; + }; + + qup_uart10_tx: qup-uart10-tx { + pins = "gpio42"; + function = "qup12"; + }; + + qup_uart10_rx: qup-uart10-rx { + pins = "gpio43"; + function = "qup12"; + }; + + qup_uart11_cts: qup-uart11-cts { + pins = "gpio44"; + function = "qup13"; + }; + + qup_uart11_rts: qup-uart11-rts { + pins = "gpio45"; + function = "qup13"; + }; + + qup_uart11_tx: qup-uart11-tx { + pins = "gpio46"; + function = "qup13"; + }; + + qup_uart11_rx: qup-uart11-rx { + pins = "gpio47"; + function = "qup13"; + }; + + qup_uart12_cts: qup-uart12-cts { + pins = "gpio48"; + function = "qup14"; + }; + + qup_uart12_rts: qup-uart12-rts { + pins = "gpio49"; + function = "qup14"; + }; + + qup_uart12_tx: qup-uart12-tx { + pins = "gpio50"; + function = "qup14"; + }; + + qup_uart12_rx: qup-uart12-rx { + pins = "gpio51"; + function = "qup14"; + }; + + qup_uart13_cts: qup-uart13-cts { + pins = "gpio52"; + function = "qup15"; + }; + + qup_uart13_rts: qup-uart13-rts { + pins = "gpio53"; + function = "qup15"; + }; + + qup_uart13_tx: qup-uart13-tx { + pins = "gpio54"; + function = "qup15"; + }; + + qup_uart13_rx: qup-uart13-rx { + pins = "gpio55"; + function = "qup15"; + }; + + qup_uart14_cts: qup-uart14-cts { + pins = "gpio56"; + function = "qup16"; + }; + + qup_uart14_rts: qup-uart14-rts { + pins = "gpio57"; + function = "qup16"; + }; + + qup_uart14_tx: qup-uart14-tx { + pins = "gpio58"; + function = "qup16"; + }; + + qup_uart14_rx: qup-uart14-rx { + pins = "gpio59"; + function = "qup16"; + }; + + qup_uart15_cts: qup-uart15-cts { + pins = "gpio60"; + function = "qup17"; + }; + + qup_uart15_rts: qup-uart15-rts { + pins = "gpio61"; + function = "qup17"; + }; + + qup_uart15_tx: qup-uart15-tx { + pins = "gpio62"; + function = "qup17"; + }; + + qup_uart15_rx: qup-uart15-rx { + pins = "gpio63"; + function = "qup17"; + }; + }; + + imem@146a5000 { + compatible = "qcom,sc7280-imem", "syscon"; + reg = <0 0x146a5000 0 0x6000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146a5000 0x6000>; + + pil-reloc@594c { + compatible = "qcom,pil-reloc-info"; + reg = <0x594c 0xc8>; + }; }; apps_smmu: iommu@15000000 { @@ -2471,16 +4433,16 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens1 1>; trips { gpuss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss0_crit: gpuss0-crit { @@ -2489,19 +4451,26 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpuss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens1 2>; trips { gpuss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss1_crit: gpuss1-crit { @@ -2510,6 +4479,13 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; nspss0-thermal { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts index a4e1fb8..71b4489 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts @@ -11,6 +11,7 @@ / { model = "Sony Xperia 10"; compatible = "sony,kirin-row", "qcom,sdm630"; + chassis-type = "handset"; chosen { framebuffer@9d400000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts index c574e43..dd484a9 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts @@ -11,4 +11,5 @@ / { model = "Sony Xperia XA2 Ultra"; compatible = "sony,discovery-row", "qcom,sdm630"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts index a93ff3a..2da83cd 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts @@ -11,4 +11,5 @@ / { model = "Sony Xperia XA2"; compatible = "sony,pioneer-row", "qcom,sdm630"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts index 59a679c..a679d4a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts @@ -11,6 +11,7 @@ / { model = "Sony Xperia XA2 Plus"; compatible = "sony,voyager-row", "qcom,sdm630"; + chassis-type = "handset"; chosen { framebuffer@9d400000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 849900e..11d0a8c 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -308,7 +308,7 @@ regulator-allow-set-load; }; - vreg_l4b_29p5: l4 { + vreg_l4b_2p95: l4 { regulator-min-microvolt = <2944000>; regulator-max-microvolt = <2952000>; regulator-enable-ramp-delay = <250>; @@ -327,7 +327,7 @@ * Tighten the range to 1.8-3.328 (closest to 3.3) to * make the mmc driver happy. */ - vreg_l5b_29p5: l5 { + vreg_l5b_2p95: l5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3328000>; regulator-enable-ramp-delay = <250>; @@ -559,14 +559,14 @@ mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; - vmmc-supply = <&vreg_l4b_29p5>; + vmmc-supply = <&vreg_l4b_2p95>; vqmmc-supply = <&vreg_l8a_1p8>; }; &sdhc_2 { status = "okay"; - vmmc-supply = <&vreg_l5b_29p5>; + vmmc-supply = <&vreg_l5b_2p95>; vqmmc-supply = <&vreg_l2b_2p95>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 9c7f87e..3e0165b 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -541,7 +541,7 @@ <&sleep_clk>; }; - rpm_msg_ram: memory@778000 { + rpm_msg_ram: sram@778000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00778000 0x7000>; }; @@ -1176,6 +1176,11 @@ status = "disabled"; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: spmi@800f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0800f000 0x1000>, @@ -2020,6 +2025,57 @@ }; }; + venus: video-codec@cc00000 { + compatible = "qcom,sdm660-venus"; + reg = <0x0cc00000 0xff000>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc THROTTLE_VIDEO_AXI_CLK>; + clock-names = "core", "iface", "bus", "bus_throttle"; + interconnects = <&gnoc 0 &mnoc 13>, + <&mnoc 4 &bimc 5>; + interconnect-names = "cpu-cfg", "video-mem"; + interrupts = ; + iommus = <&mmss_smmu 0x400>, + <&mmss_smmu 0x401>, + <&mmss_smmu 0x40a>, + <&mmss_smmu 0x407>, + <&mmss_smmu 0x40e>, + <&mmss_smmu 0x40f>, + <&mmss_smmu 0x408>, + <&mmss_smmu 0x409>, + <&mmss_smmu 0x40b>, + <&mmss_smmu 0x40c>, + <&mmss_smmu 0x40d>, + <&mmss_smmu 0x410>, + <&mmss_smmu 0x421>, + <&mmss_smmu 0x428>, + <&mmss_smmu 0x429>, + <&mmss_smmu 0x42b>, + <&mmss_smmu 0x42c>, + <&mmss_smmu 0x42d>, + <&mmss_smmu 0x411>, + <&mmss_smmu 0x431>; + memory-region = <&venus_region>; + power-domains = <&mmcc VENUS_GDSC>; + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + }; + mmss_smmu: iommu@cd00000 { compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; reg = <0x0cd00000 0x40000>; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 3e677fb..1edc53f 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -10,6 +10,7 @@ / { model = "Xiaomi Redmi Note 7"; compatible = "xiaomi,lavender", "qcom,sdm660"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index dfd1b42..4a6285a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -5,7 +5,6 @@ * Copyright 2018 Google LLC. */ -#include #include #include #include "sdm845.dtsi" @@ -616,6 +615,14 @@ ap_ts_i2c: &i2c14 { }; }; +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + &ipa { status = "okay"; modem-init; @@ -629,10 +636,6 @@ ap_ts_i2c: &i2c14 { status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - /* * Cheza fw does not properly program the GPU aperture to allow the * GPU to update the SMMU pagetables for context switches. Work @@ -643,6 +646,8 @@ ap_ts_i2c: &i2c14 { }; &mss_pil { + status = "okay"; + iommus = <&apps_smmu 0x781 0x0>, <&apps_smmu 0x724 0x3>; }; @@ -1317,6 +1322,8 @@ ap_ts_i2c: &i2c14 { }; &venus { + status = "okay"; + video-firmware { iommus = <&apps_smmu 0x10b2 0x0>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 2d5533d..13f80a0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -5,7 +5,6 @@ /dts-v1/; -#include #include #include #include @@ -17,6 +16,8 @@ / { model = "Thundercomm Dragonboard 845c"; compatible = "thundercomm,db845c", "qcom,sdm845"; + qcom,msm-id = <341 0x20001>; + qcom,board-id = <8 0>; aliases { serial0 = &uart9; @@ -420,7 +421,12 @@ ; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/a630_zap.mbn"; @@ -485,10 +491,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -999,6 +1001,10 @@ vdda-pll-supply = <&vreg_l26a_1p2>; }; +&venus { + status = "okay"; +}; + &wcd9340{ pinctrl-0 = <&wcd_intr_default>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 52dd7a8..5e6e8f4 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -7,7 +7,6 @@ /dts-v1/; -#include #include #include "sdm845.dtsi" @@ -361,9 +360,6 @@ qcom,dual-dsi-mode; qcom,master-dsi; - #address-cells = <1>; - #size-cells = <0>; - ports { port@1 { endpoint { @@ -439,7 +435,13 @@ ; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/a630_zap.mbn"; @@ -460,10 +462,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -566,6 +564,10 @@ vdda-pll-supply = <&vdda_usb2_ss_core>; }; +&venus { + status = "okay"; +}; + &wifi { status = "okay"; vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index d435552..3e04aeb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -7,7 +7,6 @@ /dts-v1/; -#include #include #include @@ -93,7 +92,6 @@ console-size = <0x40000>; ftrace-size = <0x40000>; pmsg-size = <0x200000>; - devinfo-size = <0x1000>; ecc-size = <16>; }; }; @@ -248,6 +246,12 @@ regulator-initial-mode = ; }; + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + vdda_qusb_hs0_3p1: vreg_l24a_3p075: ldo24 { regulator-min-microvolt = <3088000>; @@ -315,9 +319,6 @@ status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>; - #address-cells = <1>; - #size-cells = <0>; - /* * Both devices use different panels but all other properties * are common. Compatible line is declared in device dts. @@ -362,7 +363,13 @@ ; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; @@ -415,10 +422,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - /* Modem/wifi*/ &mss_pil { status = "okay"; @@ -641,12 +644,17 @@ }; }; +&venus { + status = "okay"; +}; + &wifi { status = "okay"; vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,snoc-host-cap-8bit-quirk; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 72842c8..7349307 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -10,6 +10,7 @@ / { model = "OnePlus 6"; compatible = "oneplus,enchilada", "qcom,sdm845"; + chassis-type = "handset"; }; &display_panel { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 969b36d..b63ebc4 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -10,6 +10,7 @@ / { model = "OnePlus 6T"; compatible = "oneplus,fajita", "qcom,sdm845"; + chassis-type = "handset"; }; &display_panel { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index c60c8c6..580d4cc 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -2,7 +2,6 @@ /dts-v1/; -#include #include #include #include @@ -29,6 +28,7 @@ / { model = "Xiaomi Pocophone F1"; compatible = "xiaomi,beryllium", "qcom,sdm845"; + chassis-type = "handset"; /* required for bootloader to select correct board */ qcom,board-id = <69 0>; @@ -215,9 +215,6 @@ status = "okay"; vdda-supply = <&vreg_l26a_1p2>; - #address-cells = <1>; - #size-cells = <0>; - panel@0 { compatible = "tianma,fhd-video"; reg = <0>; @@ -256,7 +253,13 @@ ; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/a630_zap.mbn"; @@ -284,10 +287,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt"; @@ -513,6 +512,10 @@ vdda-pll-supply = <&vreg_l1a_0p875>; }; +&venus { + status = "okay"; +}; + &wcd9340{ pinctrl-0 = <&wcd_intr_default>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index b3b9119..5260875 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -99,9 +100,11 @@ no-map; }; - smem_mem: memory@86000000 { + smem@86000000 { + compatible = "qcom,smem"; reg = <0x0 0x86000000 0 0x200000>; no-map; + hwlocks = <&tcsr_mutex 3>; }; tz_mem: memory@86200000 { @@ -768,6 +771,8 @@ memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -867,6 +872,8 @@ memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&cdsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -941,12 +948,6 @@ #hwlock-cells = <1>; }; - smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; - }; - smp2p-cdsp { compatible = "qcom,smp2p"; qcom,smem = <94>, <432>; @@ -1995,10 +1996,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_AUX_CLK>, @@ -2064,7 +2065,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06200 { + pcie0_lane: phy@1c06200 { reg = <0 0x01c06200 0 0x128>, <0 0x01c06400 0 0x1fc>, <0 0x01c06800 0 0x218>, @@ -2100,10 +2101,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, @@ -2174,7 +2175,7 @@ status = "disabled"; - pcie1_lane: lanes@1c06200 { + pcie1_lane: phy@1c06200 { reg = <0 0x01c0a800 0 0x800>, <0 0x01c0a800 0 0x800>, <0 0x01c0b800 0 0x400>; @@ -2302,7 +2303,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -2312,15 +2313,15 @@ }; }; - cryptobam: dma@1dc4000 { + cryptobam: dma-controller@1dc4000 { compatible = "qcom,bam-v1.7.0"; reg = <0 0x01dc4000 0 0x24000>; interrupts = ; - clocks = <&rpmhcc 15>; + clocks = <&rpmhcc RPMH_CE_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; iommus = <&apps_smmu 0x704 0x1>, <&apps_smmu 0x706 0x1>, <&apps_smmu 0x714 0x1>, @@ -2331,8 +2332,8 @@ compatible = "qcom,crypto-v5.4"; reg = <0 0x01dfa000 0 0x6000>; clocks = <&gcc GCC_CE1_AHB_CLK>, - <&gcc GCC_CE1_AHB_CLK>, - <&rpmhcc 15>; + <&gcc GCC_CE1_AXI_CLK>, + <&rpmhcc RPMH_CE_CLK>; clock-names = "iface", "bus", "core"; dmas = <&cryptobam 6>, <&cryptobam 7>; dma-names = "rx", "tx"; @@ -2984,6 +2985,8 @@ clock-names = "iface", "bus", "mem", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng", "xo"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2993,11 +2996,12 @@ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; - power-domains = <&aoss_qmp 2>, - <&rpmhpd SDM845_CX>, + power-domains = <&rpmhpd SDM845_CX>, <&rpmhpd SDM845_MX>, <&rpmhpd SDM845_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; + power-domain-names = "cx", "mx", "mss"; + + status = "disabled"; mba { memory-region = <&mba_region>; @@ -3497,8 +3501,9 @@ interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>; - clock-names = "iface", "core"; + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0xa0 0xf>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&sdhc2_opp_table>; @@ -3646,6 +3651,30 @@ }; }; + lmh_cluster1: lmh@17d70800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d70800 0 0x400>; + interrupts = ; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh_cluster0: lmh@17d78800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d78800 0 0x400>; + interrupts = ; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + sound: sound { }; @@ -3683,7 +3712,6 @@ compatible = "qcom,sdm845-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x18c>, <0 0x088e8000 0 0x10>; - reg-names = "reg-base", "dp_com"; status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -3699,7 +3727,7 @@ <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: lanes@88e9200 { + usb_1_ssphy: phy@88e9200 { reg = <0 0x088e9200 0 0x128>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>, @@ -3732,7 +3760,7 @@ <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lane@88eb200 { + usb_2_ssphy: phy@88eb200 { reg = <0 0x088eb200 0 0x128>, <0 0x088eb400 0 0x1fc>, <0 0x088eb800 0 0x218>, @@ -3868,6 +3896,8 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; interconnect-names = "video-mem", "cpu-cfg"; + status = "disabled"; + video-core0 { compatible = "venus-decoder"; }; @@ -4194,8 +4224,6 @@ interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; @@ -4271,6 +4299,9 @@ status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -4340,6 +4371,9 @@ status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -4402,6 +4436,8 @@ interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; + status = "disabled"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -4497,6 +4533,8 @@ operating-points-v2 = <&gmu_opp_table>; + status = "disabled"; + gmu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -4588,7 +4626,6 @@ mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; cx_cdev: cx { #cooling-cells = <2>; @@ -4917,6 +4954,8 @@ reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; + interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; @@ -4974,23 +5013,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu0_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu0_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu1-thermal { @@ -5018,23 +5040,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu1_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu1_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu2-thermal { @@ -5062,23 +5067,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu2_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu2_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu3-thermal { @@ -5106,23 +5094,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu3_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu3_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu4-thermal { @@ -5150,23 +5121,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu4_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu4_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu5-thermal { @@ -5194,23 +5148,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu5_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu5_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu6-thermal { @@ -5238,23 +5175,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu6_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu6_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu7-thermal { @@ -5282,23 +5202,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu7_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu7_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; aoss0-thermal { diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 2ba23aa..d6b2ba4 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -7,7 +7,6 @@ /dts-v1/; -#include #include #include #include @@ -30,6 +29,7 @@ / { model = "Lenovo Yoga C630"; compatible = "lenovo,yoga-c630", "qcom,sdm845"; + chassis-type = "convertible"; aliases { hsuart0 = &uart6; @@ -264,6 +264,9 @@ }; vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; }; vdda_qusb_hs0_3p1: @@ -341,7 +344,12 @@ ; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; @@ -458,11 +466,8 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { + status = "okay"; firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; }; @@ -649,6 +654,7 @@ vddxo-supply = <&vreg_l7a_1p8>; vddrf-supply = <&vreg_l17a_1p3>; vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; max-speed = <3200000>; }; }; @@ -723,6 +729,10 @@ vdda-pll-supply = <&vdda_usb2_ss_core>; }; +&venus { + status = "okay"; +}; + &wcd9340{ pinctrl-0 = <&wcd_intr_default>; pinctrl-names = "default"; @@ -763,6 +773,7 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,snoc-host-cap-8bit-quirk; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 58b6b27..45eab02 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -17,6 +17,7 @@ model = "Sony Xperia 10 II"; compatible = "sony,pdx201", "qcom,sm6125"; + chassis-type = "handset"; chosen { #address-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 2b37ce6..51286dd 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -326,8 +326,8 @@ tlmm: pinctrl@500000 { compatible = "qcom,sm6125-tlmm"; reg = <0x00500000 0x400000>, - <0x00900000 0x400000>, - <0x00d00000 0x400000>; + <0x00900000 0x400000>, + <0x00d00000 0x400000>; reg-names = "west", "south", "east"; interrupts = ; gpio-controller; @@ -380,7 +380,7 @@ status = "disabled"; }; - rpm_msg_ram: memory@45f0000 { + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x045f0000 0x7000>; }; @@ -391,12 +391,12 @@ reg-names = "hc", "core"; interrupts = , - ; + ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; clock-names = "iface", "core", "xo"; bus-width = <8>; non-removable; @@ -409,12 +409,12 @@ reg-names = "hc"; interrupts = , - ; + ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; clock-names = "iface", "core", "xo"; pinctrl-0 = <&sdc2_state_on>; @@ -433,11 +433,11 @@ ranges; clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -460,13 +460,18 @@ }; }; + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x04690000 0x10000>; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x01c40000 0x1100>, - <0x01e00000 0x2000000>, - <0x03e00000 0x100000>, - <0x03f00000 0xa0000>, - <0x01c0a000 0x26000>; + reg = <0x01c40000 0x1100>, + <0x01e00000 0x2000000>, + <0x03e00000 0x100000>, + <0x03f00000 0xa0000>, + <0x01c0a000 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = ; @@ -494,22 +499,22 @@ reg = <0x0f120000 0x1000>; clock-frequency = <19200000>; - frame@0f121000 { + frame@f121000 { frame-number = <0>; interrupts = , - ; + ; reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>; }; - frame@0f123000 { + frame@f123000 { frame-number = <1>; interrupts = ; reg = <0x0f123000 0x1000>; status = "disabled"; }; - frame@0f124000 { + frame@f124000 { frame-number = <2>; interrupts = ; reg = <0x0f124000 0x1000>; @@ -548,7 +553,7 @@ intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; reg = <0x0f200000 0x20000>, - <0x0f300000 0x100000>; + <0x0f300000 0x100000>; #interrupt-cells = <3>; interrupt-controller; interrupts = ; @@ -558,9 +563,9 @@ timer { compatible = "arm,armv8-timer"; interrupts = ; + GIC_PPI 2 0xf08 + GIC_PPI 3 0xf08 + GIC_PPI 0 0xf08>; clock-frequency = <19200000>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts new file mode 100644 index 0000000..36911b9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ +/dts-v1/; + +#include "sm6350.dtsi" + +/ { + model = "Sony Xperia 10 III"; + compatible = "sony,pdx213", "qcom,sm6350"; + chassis-type = "handset"; + qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,board-id = <0x1000B 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@a0000000 { + compatible = "simple-framebuffer"; + reg = <0 0xa0000000 0 0x2300000>; + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_AXI_CLK>; + }; + }; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>, <45 2>, <56 2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi new file mode 100644 index 0000000..973e18f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -0,0 +1,965 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <703>; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <703>; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6350", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0 0x80000000 0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + reg = <0 0x80700000 0 0x160000>; + no-map; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0 0x80860000 0 0x20000>; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0 0x808ff000 0 0x1000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0 0x80900000 0 0x200000>; + no-map; + }; + + cdsp_sec_mem: memory@80b00000 { + reg = <0 0x80b00000 0 0x1e00000>; + no-map; + }; + + pil_camera_mem: memory@86000000 { + reg = <0 0x86000000 0 0x500000>; + no-map; + }; + + pil_npu_mem: memory@86500000 { + reg = <0 0x86500000 0 0x500000>; + no-map; + }; + + pil_video_mem: memory@86a00000 { + reg = <0 0x86a00000 0 0x500000>; + no-map; + }; + + pil_cdsp_mem: memory@86f00000 { + reg = <0 0x86f00000 0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@88d00000 { + reg = <0 0x88d00000 0 0x2800000>; + no-map; + }; + + wlan_fw_mem: memory@8b500000 { + reg = <0 0x8b500000 0 0x200000>; + no-map; + }; + + pil_ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@8b710000 { + reg = <0 0x8b710000 0 0x5400>; + no-map; + }; + + pil_gpu_mem: memory@8b715400 { + reg = <0 0x8b715400 0 0x2000>; + no-map; + }; + + pil_modem_mem: memory@8b800000 { + reg = <0 0x8b800000 0 0xf800000>; + no-map; + }; + + cont_splash_memory: memory@a0000000 { + reg = <0 0xa0000000 0 0x2300000>; + no-map; + }; + + dfps_data_memory: memory@a2300000 { + reg = <0 0xa2300000 0 0x100000>; + no-map; + }; + + removed_region: memory@c0000000 { + reg = <0 0xc0000000 0 0x3900000>; + no-map; + }; + + debug_region: memory@ffb00000 { + reg = <0 0xffb00000 0 0xc0000>; + no-map; + }; + + last_log_region: memory@ffbc0000 { + reg = <0 0xffbc0000 0 0x40000>; + no-map; + }; + + ramoops: ramoops@ffc00000 { + compatible = "removed-dma-pool", "ramoops"; + reg = <0 0xffc00000 0 0x00100000>; + record-size = <0x1000>; + console-size = <0x40000>; + ftrace-size = <0x0>; + msg-size = <0x20000 0x20000>; + cc-size = <0x0>; + no-map; + }; + + cmdline_region: memory@ffd00000 { + reg = <0 0xffd00000 0 0x1000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm6350"; + reg = <0 0x00100000 0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm6350-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0 0x00793000 0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + sdhc_1: sdhci@7c4000 { + compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>, + <0 0x007c8000 0 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc1_opp_table>; + bus-width = <8>; + non-removable; + supports-cqe; + + status = "disabled"; + + sdhc1_opp_table: sdhc1-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + qupv3_id_1: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x9c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x4c3 0x0>; + ranges; + status = "disabled"; + + uart2: serial@98c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x98c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = ; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&xo_board>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sc7180-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x40>, + <0 0x088ea000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_QLINK_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&xo_board>; + clock-names = "aux", "ref", "com_aux", "cfg_ahb"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eac00 0 0x400>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>, + <0 0x088eaa00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm6350-llcc"; + reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm6350-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x540 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm6350-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 655 12>, <138 139 15>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x1000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0xc440000 0 0x1100>, + <0 0xc600000 0 0x2000000>, + <0 0xe600000 0 0x100000>, + <0 0xe700000 0 0xa0000>, + <0 0xc40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm6350-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = , + , + , + , + , + , + , + , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 157>; + + qup_uart2_default: qup-uart2-default { + pins = "gpio25", "gpio26"; + function = "qup13_f2"; + drive-strength = <2>; + bias-disable; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm6350-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x0 0x17c27000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + label = "apps_rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + rpmhcc: clock-controller { + compatible = "qcom,sm6350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm6350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + clock-frequency = <19200000>; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts new file mode 100644 index 0000000..8d6fd22 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss + */ + +/dts-v1/; + +#include +#include +#include +#include +#include "sm7225.dtsi" +#include "pm6350.dtsi" + +/ { + model = "Fairphone 4"; + compatible = "fairphone,fp4", "qcom,sm7225"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,board-id = <8 32>; + + aliases { + serial0 = &uart2; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@a000000 { + compatible = "simple-framebuffer"; + reg = <0 0xa0000000 0 (2340 * 1080 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin>; + + volume-up { + label = "volume_up"; + linux,code = ; + gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&apps_rsc { + pm6350-rpmh-regulators { + compatible = "qcom,pm6350-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a: smps1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s2a: smps2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <2048000>; + }; + + vreg_l2a: ldo2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l3a: ldo3 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l4a: ldo4 { + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = ; + }; + + vreg_l5a: ldo5 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l6a: ldo6 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l7a: ldo7 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l8a: ldo8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l9a: ldo9 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = ; + }; + + vreg_l11a: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l12a: ldo12 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l13a: ldo13 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + regulator-initial-mode = ; + }; + + vreg_l14a: ldo14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = ; + }; + + vreg_l15a: ldo15 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = ; + }; + + vreg_l16a: ldo16 { + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <921000>; + regulator-initial-mode = ; + }; + + vreg_l18a: ldo18 { + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1049000>; + regulator-initial-mode = ; + }; + + vreg_l19a: ldo19 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = ; + }; + + vreg_l20a: ldo20 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = ; + }; + + vreg_l21a: ldo21 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <825000>; + regulator-initial-mode = ; + }; + + vreg_l22a: ldo22 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = ; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s8e: smps8 { + regulator-min-microvolt = <313000>; + regulator-max-microvolt = <1395000>; + }; + + vreg_l1e: ldo1 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l2e: ldo2 { + regulator-min-microvolt = <1170000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = ; + }; + + vreg_l3e: ldo3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1299000>; + regulator-initial-mode = ; + }; + + vreg_l4e: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l5e: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l6e: ldo6 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l7e: ldo7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l8e: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l9e: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l10e: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = ; + }; + + vreg_l11e: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = ; + }; + + vreg_bob: bob { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <5492000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; +}; + +&pm6350_gpios { + gpio_keys_pin: gpio-keys-pin { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + power-source = <0>; + }; +}; + +&pm6350_resin { + status = "okay"; + linux,code = ; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>, <56 2>; +}; + +&uart2 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l2a>; + vdda-phy-dpdm-supply = <&vreg_l3a>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l22a>; + vdda-pll-supply = <&vreg_l16a>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi new file mode 100644 index 0000000..7b2a002 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss + */ + +#include "sm6350.dtsi" + +/* SM7225 uses Kryo 570 instead of Kryo 560 */ +&CPU0 { compatible = "qcom,kryo570"; }; +&CPU1 { compatible = "qcom,kryo570"; }; +&CPU2 { compatible = "qcom,kryo570"; }; +&CPU3 { compatible = "qcom,kryo570"; }; +&CPU4 { compatible = "qcom,kryo570"; }; +&CPU5 { compatible = "qcom,kryo570"; }; +&CPU6 { compatible = "qcom,kryo570"; }; +&CPU7 { compatible = "qcom,kryo570"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 335aa07..37ddca0 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -419,9 +419,7 @@ status = "okay"; vdda-phy-supply = <&vdda_ufs_2ln_core_1>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l3c_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index 736da9a..5901c28 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -15,6 +15,7 @@ / { model = "Microsoft Surface Duo"; compatible = "microsoft,surface-duo", "qcom,sm8150"; + chassis-type = "handset"; aliases { serial0 = &uart2; @@ -507,9 +508,7 @@ status = "okay"; vdda-phy-supply = <&vdda_ufs_2ln_core_1>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l3c_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index b484371..46b5cf9 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -416,9 +416,7 @@ status = "okay"; vdda-phy-supply = <&vdda_ufs_2ln_core_1>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l3c_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts index 3b55fdd..b278040 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia 5"; compatible = "sony,bahamut-generic", "qcom,sm8150"; + chassis-type = "handset"; }; &framebuffer { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts index 6f490ec..0d6dece 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts @@ -10,4 +10,5 @@ / { model = "Sony Xperia 1"; compatible = "sony,griffin-generic", "qcom,sm8150"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index ef0232c..81b4ff2 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -6,7 +6,6 @@ #include #include -#include #include #include #include @@ -1692,7 +1691,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -1729,13 +1728,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd 3>, + power-domains = <&rpmhpd 3>, <&rpmhpd 2>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&slpi_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -1746,6 +1746,33 @@ label = "dsps"; qcom,remote-pid = <3>; mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x05a1 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x05a2 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x05a3 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; }; }; @@ -2319,13 +2346,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd 7>, + power-domains = <&rpmhpd 7>, <&rpmhpd 0>; - power-domain-names = "load_state", "cx", "mss"; + power-domain-names = "cx", "mss"; memory-region = <&mpss_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2945,12 +2973,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd 7>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd 7>; memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&cdsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2961,6 +2989,72 @@ label = "cdsp"; qcom,remote-pid = <5>; mboxes = <&apss_shared 4>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1401 0x2040>, + <&apps_smmu 0x1421 0x0>, + <&apps_smmu 0x2001 0x420>, + <&apps_smmu 0x2041 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2 0x3440>, + <&apps_smmu 0x22 0x3400>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x3 0x3440>, + <&apps_smmu 0x1423 0x0>, + <&apps_smmu 0x2023 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x4 0x3440>, + <&apps_smmu 0x24 0x3400>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x5 0x3440>, + <&apps_smmu 0x25 0x3400>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x6 0x3460>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x7 0x3460>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x8 0x3460>; + }; + + /* note: secure cb9 in downstream */ + }; }; }; @@ -2994,7 +3088,6 @@ compatible = "qcom,sm8150-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x18c>, <0 0x088e8000 0 0x10>; - reg-names = "reg-base", "dp_com"; status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -3010,7 +3103,7 @@ <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: lanes@88e9200 { + usb_1_ssphy: phy@88e9200 { reg = <0 0x088e9200 0 0x200>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>, @@ -3043,7 +3136,7 @@ <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lane@88eb200 { + usb_2_ssphy: phy@88eb200 { reg = <0 0x088eb200 0 0x200>, <0 0x088eb400 0 0x200>, <0 0x088eb800 0 0x800>, @@ -3169,12 +3262,16 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8150-aoss-qmp"; - reg = <0x0 0x0c300000 0x0 0x100000>; + reg = <0x0 0x0c300000 0x0 0x400>; interrupts = ; mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; tsens0: thermal-sensor@c263000 { @@ -3321,12 +3418,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd 7>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd 7>; memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -3337,6 +3434,32 @@ label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apss_shared 8>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1b23 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1b24 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1b25 0x0>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts index 4774281..3b08247 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -409,9 +409,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5a_0p88>; - vdda-max-microamp = <89900>; vdda-pll-supply = <&vreg_l9a_1p2>; - vdda-pll-max-microamp = <18800>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 062b944..5ffbcdd 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -647,9 +647,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5a_0p875>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l9a_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts index 79afeb0..356a816 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia 1 II"; compatible = "sony,pdx203-generic", "qcom,sm8250"; + chassis-type = "handset"; }; /delete-node/ &vreg_l7f_1p8; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index 16c96e8..5ecf7da 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia 5 II"; compatible = "sony,pdx206-generic", "qcom,sm8250"; + chassis-type = "handset"; }; &framebuffer { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index d12e4cb..6f6129b 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -273,13 +272,6 @@ reg = <0x0 0x80000000 0x0 0x0>; }; - mmcx_reg: mmcx-reg { - compatible = "regulator-fixed-domain"; - power-domains = <&rpmhpd SM8250_MMCX>; - required-opps = <&rpmhpd_opp_low_svs>; - regulator-name = "MMCX"; - }; - pmu { compatible = "arm,armv8-pmuv3"; interrupts = ; @@ -1463,7 +1455,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06200 { + pcie0_lane: phy@1c06200 { reg = <0 0x1c06200 0 0x170>, /* tx */ <0 0x1c06400 0 0x200>, /* rx */ <0 0x1c06800 0 0x1f0>, /* pcs */ @@ -1567,7 +1559,7 @@ status = "disabled"; - pcie1_lane: lanes@1c0e200 { + pcie1_lane: phy@1c0e200 { reg = <0 0x1c0e200 0 0x170>, /* tx0 */ <0 0x1c0e400 0 0x200>, /* rx0 */ <0 0x1c0ea00 0 0x1f0>, /* pcs */ @@ -1673,7 +1665,7 @@ status = "disabled"; - pcie2_lane: lanes@1c16200 { + pcie2_lane: phy@1c16200 { reg = <0 0x1c16200 0 0x170>, /* tx0 */ <0 0x1c16400 0 0x200>, /* rx0 */ <0 0x1c16a00 0 0x1f0>, /* pcs */ @@ -1750,7 +1742,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -2088,13 +2080,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd SM8250_LCX>, + power-domains = <&rpmhpd SM8250_LCX>, <&rpmhpd SM8250_LMX>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_slpi_out 0>; qcom,smem-state-names = "stop"; @@ -2154,12 +2147,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd SM8250_CX>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd SM8250_CX>; memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_cdsp_out 0>; qcom,smem-state-names = "stop"; @@ -2330,7 +2323,7 @@ <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lanes@88eb200 { + usb_2_ssphy: phy@88eb200 { reg = <0 0x088eb200 0 0x200>, <0 0x088eb400 0 0x200>, <0 0x088eb800 0 0x800>; @@ -2571,7 +2564,8 @@ clocks = <&gcc GCC_VIDEO_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>; - mmcx-supply = <&mmcx_reg>; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; clock-names = "iface", "bi_tcxo", "bi_tcxo_ao"; #clock-cells = <1>; #reset-cells = <1>; @@ -2846,7 +2840,8 @@ dispcc: clock-controller@af00000 { compatible = "qcom,sm8250-dispcc"; reg = <0 0x0af00000 0 0x10000>; - mmcx-supply = <&mmcx_reg>; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&dsi0_phy 0>, <&dsi0_phy 1>, @@ -2900,7 +2895,7 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8250-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -2908,7 +2903,11 @@ IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -3825,13 +3824,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd SM8250_LCX>, + power-domains = <&rpmhpd SM8250_LCX>, <&rpmhpd SM8250_LMX>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop"; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 56093e2..be06237 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -251,9 +251,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5b_0p88>; - vdda-max-microamp = <91600>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index bd95009..06eedbe 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -286,6 +286,10 @@ firmware-name = "qcom/sm8350/modem.mbn"; }; +&pmk8350_rtc { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -318,9 +322,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5b_0p88>; - vdda-max-microamp = <91600>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index e91cd8a..d134280 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -48,6 +47,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -65,6 +66,8 @@ enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -79,6 +82,8 @@ enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -93,6 +98,8 @@ enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -107,6 +114,8 @@ enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -121,6 +130,8 @@ enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -136,6 +147,8 @@ enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -150,12 +163,86 @@ enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; }; firmware { @@ -179,6 +266,59 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved_memory: reserved-memory { @@ -726,15 +866,16 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd 0>, + power-domains = <&rpmhpd 0>, <&rpmhpd 12>; - power-domain-names = "load_state", "cx", "mss"; + power-domain-names = "cx", "mss"; interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; memory-region = <&pil_modem_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_modem_out 0>; qcom,smem-state-names = "stop"; @@ -788,13 +929,17 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8350-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -1070,7 +1215,6 @@ reg = <0 0x01d87000 0 0xe10>; #address-cells = <2>; #size-cells = <2>; - #clock-cells = <1>; ranges; clock-names = "ref", "ref_aux"; @@ -1081,7 +1225,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -1107,13 +1251,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd 4>, + power-domains = <&rpmhpd 4>, <&rpmhpd 5>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&pil_slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_slpi_out 0>; qcom,smem-state-names = "stop"; @@ -1129,6 +1274,32 @@ label = "slpi"; qcom,remote-pid = <3>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; }; }; @@ -1147,15 +1318,16 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd 0>, + power-domains = <&rpmhpd 0>, <&rpmhpd 10>; - power-domain-names = "load_state", "cx", "mxc"; + power-domain-names = "cx", "mxc"; interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; memory-region = <&pil_cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_cdsp_out 0>; qcom,smem-state-names = "stop"; @@ -1170,6 +1342,72 @@ label = "cdsp"; qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1188 0x0420>; + }; + + /* note: secure cb9 in downstream */ + }; }; }; @@ -1203,9 +1441,7 @@ compatible = "qcom,sm8350-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x200>, <0 0x088e8000 0 0x20>; - reg-names = "reg-base", "dp_com"; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1238,7 +1474,6 @@ compatible = "qcom,sm8350-qmp-usb3-uni-phy"; reg = <0 0x088eb000 0 0x200>; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1381,13 +1616,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd 4>, + power-domains = <&rpmhpd 4>, <&rpmhpd 5>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&pil_adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop"; @@ -1402,6 +1638,32 @@ label = "lpass"; qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 15a53b5..d1c5c21 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -71,4 +71,6 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb + dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index 090dc9c..0d13680 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -50,6 +50,7 @@ &avb { pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; + phy-mode = "rgmii-rxid"; phy-handle = <&phy0>; rx-internal-delay-ps = <1800>; tx-internal-delay-ps = <2000>; @@ -58,6 +59,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id004d.d074", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi index 801ea54..a69d24e 100644 --- a/arch/arm64/boot/dts/renesas/cat875.dtsi +++ b/arch/arm64/boot/dts/renesas/cat875.dtsi @@ -21,6 +21,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c915", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi new file mode 100644 index 0000000..eb0327c --- /dev/null +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -0,0 +1,686 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Draak board + * + * Copyright (C) 2016-2018 Renesas Electronics Corp. + * Copyright (C) 2017 Glider bvba + */ + +#include +#include + +/ { + model = "Renesas Draak board"; + compatible = "renesas,draak"; + + aliases { + serial0 = &scif2; + ethernet0 = &avb; + }; + + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; + + brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; + default-brightness-level = <10>; + + power-supply = <®_12p0v>; + enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + + composite-in { + compatible = "composite-video-connector"; + + port { + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW56-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW56-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW56-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW56-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x18000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_12p0v: regulator-12p0v { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + sound_card: sound { + compatible = "audio-graph-card"; + + dais = <&rsnd_port0 /* ak4613 */ + /* HDMI is not yet supported */ + >; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x19_clk: x19 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&audio_clk_b { + /* + * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB, + * and R-Car Sound uses AUDIO_CLKB. + * Note is that schematic indicates VI4_FIELD conection only + * not AUDIO_CLKB at SoC page. + * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60. + * SW60 should be 1-2. + */ + + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Draak board, however, TX clock internal delay mode + * isn't supported on R-Car D3(e). Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; + }; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x12_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; + +&ehci0 { + dr_mode = "host"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <48000000>; +}; + +&hsusb { + dr_mode = "host"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 0>; /* audio_clkout */ + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_for_ak4613>; + }; + }; + }; + + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * CVBS is the default selection, link it to + * VIN4 here. + */ + adv7180_out: endpoint { + remote-endpoint = <&vin4_in>; + }; + }; + }; + + }; + + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>, <0x3f>, <0x3c>, <0x38>; + reg-names = "main", "edid", "cec", "packet"; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-decoder@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * CVBS is the default selection, leave HDMI + * not connected here. + */ + adv7612_out: endpoint { + pclk-sample = <0>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; + }; + + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */ + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + +&ohci0 { + dr_mode = "host"; + status = "okay"; +}; + +&pfc { + avb0_pins: avb { + groups = "avb0_link", "avb0_mdio", "avb0_mii"; + function = "avb0"; + }; + + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data_a"; + function = "can1"; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + keys_pins: keys { + pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15"; + bias-pull-up; + }; + + pwm0_pins: pwm0 { + groups = "pwm0_c"; + function = "pwm0"; + }; + + pwm1_pins: pwm1 { + groups = "pwm1_c"; + function = "pwm1"; + }; + + scif2_pins: scif2 { + groups = "scif2_data"; + function = "scif2"; + }; + + sdhi2_pins: sd2 { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clk_a", "audio_clk_b", + "audio_clkout", "audio_clkout1"; + function = "audio_clk"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + vin4_pins_cvbs: vin4 { + groups = "vin4_data8", "vin4_sync", "vin4_clk"; + function = "vin4"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm1 { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + status = "okay"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&cs2000>, <&audio_clk_b>, + <&cpg CPG_CORE R8A77995_CLK_ZA2>; + + ports { + rsnd_port0: port { + rsnd_for_ak4613: endpoint { + remote-endpoint = <&ak4613_endpoint>; + dai-format = "left_j"; + bitclock-master = <&rsnd_for_ak4613>; + frame-master = <&rsnd_for_ak4613>; + playback = <&ssi3>, <&src5>, <&dvc0>; + capture = <&ssi4>, <&src6>, <&dvc1>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi2 { + /* used for on-board eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&ssi4 { + shared-pin; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + renesas,no-otg-pins; + status = "okay"; +}; + +&vin4 { + pinctrl-0 = <&vin4_pins_cvbs>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port { + vin4_in: endpoint { + remote-endpoint = <&adv7180_out>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi new file mode 100644 index 0000000..67231c8 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -0,0 +1,803 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Ebisu board + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include +#include + +/ { + model = "Renesas Ebisu board"; + compatible = "renesas,ebisu"; + + aliases { + serial0 = &scif2; + ethernet0 = &avb; + mmc0 = &sdhi3; + mmc1 = &sdhi0; + mmc2 = &sdhi1; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 50000>; + + brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; + default-brightness-level = <10>; + + power-supply = <®_12p0v>; + }; + + cvbs-in { + compatible = "composite-video-connector"; + label = "CVBS IN"; + + port { + cvbs_con: endpoint { + remote-endpoint = <&adv7482_ain7>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + label = "HDMI IN"; + type = "a"; + + port { + hdmi_in_con: endpoint { + remote-endpoint = <&adv7482_hdmi>; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_12p0v: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rsnd-ak4613"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + }; + + vbus0_usb2: regulator-vbus0-usb2 { + compatible = "regulator-fixed"; + + regulator-name = "USB20_VBUS_CN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Ebisu board, however, TX clock internal delay mode + * isn't supported on R-Car E3(e). Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; + }; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; +}; + +&csi40 { + status = "okay"; + + ports { + port@0 { + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&adv7482_txa>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x13_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <48000000>; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + io_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + }; + + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70>; + + interrupt-parent = <&gpio0>; + interrupt-names = "intrq1", "intrq2"; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>, + <17 IRQ_TYPE_LEVEL_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_con>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; + }; + + port@a { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; +}; + +&i2c3 { + status = "okay"; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&i2c_dvfs { + status = "okay"; + + clock-frequency = <400000>; + + pmic: pmic@30 { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + rohm,ddr-backup-power = <0x1>; + rohm,rstbmode-level; + }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec0 { + status = "okay"; +}; + +&pfc { + avb_pins: avb { + groups = "avb_link", "avb_mii"; + function = "avb"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + + keys_pins: keys { + pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13"; + bias-pull-up; + }; + + pwm3_pins: pwm3 { + groups = "pwm3_b"; + function = "pwm3"; + }; + + pwm5_pins: pwm5 { + groups = "pwm5_a"; + function = "pwm5"; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi1_pins: sd1 { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; + function = "sdhi3"; + power-source = <1800>; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout1_a"; + function = "audio_clk"; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; + }; + + usb0_pins: usb { + groups = "usb0_b", "usb0_id"; + function = "usb0"; + }; + + usb30_pins: usb30 { + groups = "usb30"; + function = "usb30"; + }; +}; + +&pwm3 { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm5 { + pinctrl-0 = <&pwm5_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + status = "okay"; + + /* update to */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, + <&cpg CPG_CORE R8A77990_CLK_ZA2>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0>, <&src0>, <&dvc0>; + capture = <&ssi1>, <&src1>, <&dvc1>; + }; + }; + +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi3 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; +}; + +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index dde3a07..ad898c6 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -24,6 +24,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c915", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 041473a..86d59e7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -1392,6 +1392,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77961", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = ; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a77961", "renesas,rcar-gen3-msiof"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index d24da54..b579d31 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a77970.dtsi" +#include / { model = "Renesas Eagle board based on r8a77970"; @@ -92,10 +93,13 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 2426e53..39f3e6c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a77970.dtsi" +#include / { model = "Renesas V3M Starter Kit board"; @@ -107,10 +108,13 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index edf7f2a..3d6d10c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a77980.dtsi" +#include / { model = "Renesas Condor board based on r8a77980"; @@ -132,10 +133,13 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index 7838dce..1d09d88 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a77980.dtsi" +#include / { model = "Renesas V3H Starter Kit board"; @@ -113,9 +114,12 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio4>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 9c71460..9da0fd0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -7,795 +7,9 @@ /dts-v1/; #include "r8a77990.dtsi" -#include -#include +#include "ebisu.dtsi" / { model = "Renesas Ebisu board based on r8a77990"; compatible = "renesas,ebisu", "renesas,r8a77990"; - - aliases { - serial0 = &scif2; - ethernet0 = &avb; - mmc0 = &sdhi3; - mmc1 = &sdhi0; - mmc2 = &sdhi1; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - - audio_clkout: audio-clkout { - /* - * This is same as <&rcar_sound 0> - * but needed to avoid cs2000/rcar_sound probe dead-lock - */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 50000>; - - brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; - default-brightness-level = <10>; - - power-supply = <®_12p0v>; - }; - - cvbs-in { - compatible = "composite-video-connector"; - label = "CVBS IN"; - - port { - cvbs_con: endpoint { - remote-endpoint = <&adv7482_ain7>; - }; - }; - }; - - hdmi-in { - compatible = "hdmi-connector"; - label = "HDMI IN"; - type = "a"; - - port { - hdmi_in_con: endpoint { - remote-endpoint = <&adv7482_hdmi>; - }; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&keys_pins>; - pinctrl-names = "default"; - - key-1 { - gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW4-1"; - wakeup-source; - debounce-interval = <20>; - }; - key-2 { - gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW4-2"; - wakeup-source; - debounce-interval = <20>; - }; - key-3 { - gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW4-3"; - wakeup-source; - debounce-interval = <20>; - }; - key-4 { - gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW4-4"; - wakeup-source; - debounce-interval = <20>; - }; - }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <®_3p3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - - reg_1p8v: regulator0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_12p0v: regulator2 { - compatible = "regulator-fixed"; - regulator-name = "D12.0V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-boot-on; - regulator-always-on; - }; - - rsnd_ak4613: sound { - compatible = "simple-audio-card"; - - simple-audio-card,name = "rsnd-ak4613"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcpu>; - simple-audio-card,frame-master = <&sndcpu>; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4613>; - }; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - }; - - vbus0_usb2: regulator-vbus0-usb2 { - compatible = "regulator-fixed"; - - regulator-name = "USB20_VBUS_CN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vcc_sdhi1: regulator-vcc-sdhi1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI1 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; - }; - - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; - - x13_clk: x13 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; -}; - -&audio_clk_a { - clock-frequency = <22579200>; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - phy-handle = <&phy0>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio2>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; - /* - * TX clock internal delay mode is required for reliable - * 1Gbps communication using the KSZ9031RNX phy present on - * the Ebisu board, however, TX clock internal delay mode - * isn't supported on r8a77990. Thus, limit speed to - * 100Mbps for reliable communication. - */ - max-speed = <100>; - }; -}; - -&canfd { - pinctrl-0 = <&canfd0_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; -}; - -&csi40 { - status = "okay"; - - ports { - port@0 { - csi40_in: endpoint { - clock-lanes = <0>; - data-lanes = <1 2>; - remote-endpoint = <&adv7482_txa>; - }; - }; - }; -}; - -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&x13_clk>; - clock-names = "du.0", "du.1", "dclkin.0"; - - ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; - }; - }; - }; -}; - -&ehci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&extal_clk { - clock-frequency = <48000000>; -}; - -&hsusb { - dr_mode = "otg"; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - io_expander: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&gpio2>; - interrupts = <22 IRQ_TYPE_LEVEL_LOW>; - }; - - hdmi-encoder@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&thc63lvd1024_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - video-receiver@70 { - compatible = "adi,adv7482"; - reg = <0x70>; - - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&gpio0>; - interrupt-names = "intrq1", "intrq2"; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>, - <17 IRQ_TYPE_LEVEL_LOW>; - - port@7 { - reg = <7>; - - adv7482_ain7: endpoint { - remote-endpoint = <&cvbs_con>; - }; - }; - - port@8 { - reg = <8>; - - adv7482_hdmi: endpoint { - remote-endpoint = <&hdmi_in_con>; - }; - }; - - port@a { - reg = <10>; - - adv7482_txa: endpoint { - clock-lanes = <0>; - data-lanes = <1 2>; - remote-endpoint = <&csi40_in>; - }; - }; - }; -}; - -&i2c3 { - status = "okay"; - - ak4613: codec@10 { - compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; - reg = <0x10>; - clocks = <&rcar_sound 3>; - - asahi-kasei,in1-single-end; - asahi-kasei,in2-single-end; - asahi-kasei,out1-single-end; - asahi-kasei,out2-single-end; - asahi-kasei,out3-single-end; - asahi-kasei,out4-single-end; - asahi-kasei,out5-single-end; - asahi-kasei,out6-single-end; - }; - - cs2000: clk-multiplier@4f { - #clock-cells = <0>; - compatible = "cirrus,cs2000-cp"; - reg = <0x4f>; - clocks = <&audio_clkout>, <&x12_clk>; - clock-names = "clk_in", "ref_clk"; - - assigned-clocks = <&cs2000>; - assigned-clock-rates = <24576000>; /* 1/1 divide */ - }; -}; - -&i2c_dvfs { - status = "okay"; - - clock-frequency = <400000>; - - pmic: pmic@30 { - pinctrl-0 = <&irq0_pins>; - pinctrl-names = "default"; - - compatible = "rohm,bd9571mwv"; - reg = <0x30>; - interrupt-parent = <&intc_ex>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - rohm,ddr-backup-power = <0x1>; - rohm,rstbmode-level; - }; - - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; -}; - -&lvds0 { - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x13_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; - -&lvds1 { - /* - * Even though the LVDS1 output is not connected, the encoder must be - * enabled to supply a pixel clock to the DU for the DPAD output when - * LVDS0 is in use. - */ - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x13_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; -}; - -&ohci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&pcie_bus_clk { - clock-frequency = <100000000>; -}; - -&pciec0 { - status = "okay"; -}; - -&pfc { - avb_pins: avb { - groups = "avb_link", "avb_mii"; - function = "avb"; - }; - - canfd0_pins: canfd0 { - groups = "canfd0_data"; - function = "canfd0"; - }; - - du_pins: du { - groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - function = "du"; - }; - - irq0_pins: irq0 { - groups = "intc_ex_irq0"; - function = "intc_ex"; - }; - - keys_pins: keys { - pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13"; - bias-pull-up; - }; - - pwm3_pins: pwm3 { - groups = "pwm3_b"; - function = "pwm3"; - }; - - pwm5_pins: pwm5 { - groups = "pwm5_a"; - function = "pwm5"; - }; - - scif2_pins: scif2 { - groups = "scif2_data_a"; - function = "scif2"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sdhi0_pins_uhs: sd0_uhs { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <1800>; - }; - - sdhi1_pins: sd1 { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <3300>; - }; - - sdhi1_pins_uhs: sd1_uhs { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <1800>; - }; - - sdhi3_pins: sd3 { - groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; - function = "sdhi3"; - power-source = <1800>; - }; - - sound_clk_pins: sound_clk { - groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a", - "audio_clkout_a", "audio_clkout1_a"; - function = "audio_clk"; - }; - - sound_pins: sound { - groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; - function = "ssi"; - }; - - usb0_pins: usb { - groups = "usb0_b", "usb0_id"; - function = "usb0"; - }; - - usb30_pins: usb30 { - groups = "usb30"; - function = "usb30"; - }; -}; - -&pwm3 { - pinctrl-0 = <&pwm3_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm5 { - pinctrl-0 = <&pwm5_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - /* audio_clkout0/1/2/3 */ - #clock-cells = <1>; - clock-frequency = <12288000 11289600>; - - status = "okay"; - - /* update to */ - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, - <&cpg CPG_CORE R8A77990_CLK_ZA2>; - - rcar_sound,dai { - dai0 { - playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; - }; - }; - -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi1>; - vqmmc-supply = <&vccq_sdhi1>; - cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdhi3 { - /* used for on-board 8bit eMMC */ - pinctrl-0 = <&sdhi3_pins>; - pinctrl-1 = <&sdhi3_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - bus-width = <8>; - no-sd; - no-sdio; - non-removable; - full-pwr-cycle-in-suspend; - status = "okay"; -}; - -&ssi1 { - shared-pin; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&vbus0_usb2>; - status = "okay"; -}; - -&usb3_peri0 { - companion = <&xhci0>; - status = "okay"; -}; - -&vin4 { - status = "okay"; -}; - -&vin5 { - status = "okay"; -}; - -&xhci0 { - pinctrl-0 = <&usb30_pins>; - pinctrl-names = "default"; - - status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 1ac15aa..3848256 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -8,678 +8,9 @@ /dts-v1/; #include "r8a77995.dtsi" -#include -#include +#include "draak.dtsi" / { model = "Renesas Draak board based on r8a77995"; compatible = "renesas,draak", "renesas,r8a77995"; - - aliases { - serial0 = &scif2; - ethernet0 = &avb; - }; - - audio_clkout: audio-clkout { - /* - * This is same as <&rcar_sound 0> - * but needed to avoid cs2000/rcar_sound probe dead-lock - */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12288000>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 50000>; - - brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; - default-brightness-level = <10>; - - power-supply = <®_12p0v>; - enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - - composite-in { - compatible = "composite-video-connector"; - - port { - composite_con_in: endpoint { - remote-endpoint = <&adv7180_in>; - }; - }; - }; - - hdmi-in { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&adv7612_in>; - }; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&keys_pins>; - pinctrl-names = "default"; - - key-1 { - gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW56-1"; - wakeup-source; - debounce-interval = <20>; - }; - key-2 { - gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW56-2"; - wakeup-source; - debounce-interval = <20>; - }; - key-3 { - gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW56-3"; - wakeup-source; - debounce-interval = <20>; - }; - key-4 { - gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW56-4"; - wakeup-source; - debounce-interval = <20>; - }; - }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <®_3p3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x18000000>; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_12p0v: regulator-12p0v { - compatible = "regulator-fixed"; - regulator-name = "D12.0V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-boot-on; - regulator-always-on; - }; - - sound_card: sound { - compatible = "audio-graph-card"; - - dais = <&rsnd_port0 /* ak4613 */ - /* HDMI is not yet supported */ - >; - }; - - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; - }; - - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; - - x19_clk: x19 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; -}; - -&audio_clk_b { - /* - * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB, - * and R-Car Sound uses AUDIO_CLKB. - * Note is that schematic indicates VI4_FIELD conection only - * not AUDIO_CLKB at SoC page. - * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60. - * SW60 should be 1-2. - */ - - clock-frequency = <22579200>; -}; - -&avb { - pinctrl-0 = <&avb0_pins>; - pinctrl-names = "default"; - renesas,no-ether-link; - phy-handle = <&phy0>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio5>; - interrupts = <19 IRQ_TYPE_LEVEL_LOW>; - /* - * TX clock internal delay mode is required for reliable - * 1Gbps communication using the KSZ9031RNX phy present on - * the Draak board, however, TX clock internal delay mode - * isn't supported on r8a77995. Thus, limit speed to - * 100Mbps for reliable communication. - */ - max-speed = <100>; - }; -}; - -&can0 { - pinctrl-0 = <&can0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&can1 { - pinctrl-0 = <&can1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&x12_clk>; - clock-names = "du.0", "du.1", "dclkin.0"; - - ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; - }; - }; - }; -}; - -&ehci0 { - dr_mode = "host"; - status = "okay"; -}; - -&extal_clk { - clock-frequency = <48000000>; -}; - -&hsusb { - dr_mode = "host"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - - ak4613: codec@10 { - compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; - reg = <0x10>; - clocks = <&rcar_sound 0>; /* audio_clkout */ - - asahi-kasei,in1-single-end; - asahi-kasei,in2-single-end; - asahi-kasei,out1-single-end; - asahi-kasei,out2-single-end; - asahi-kasei,out3-single-end; - asahi-kasei,out4-single-end; - asahi-kasei,out5-single-end; - asahi-kasei,out6-single-end; - - port { - ak4613_endpoint: endpoint { - remote-endpoint = <&rsnd_for_ak4613>; - }; - }; - }; - - composite-in@20 { - compatible = "adi,adv7180cp"; - reg = <0x20>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7180_in: endpoint { - remote-endpoint = <&composite_con_in>; - }; - }; - - port@3 { - reg = <3>; - - /* - * The VIN4 video input path is shared between - * CVBS and HDMI inputs through SW[49-53] - * switches. - * - * CVBS is the default selection, link it to - * VIN4 here. - */ - adv7180_out: endpoint { - remote-endpoint = <&vin4_in>; - }; - }; - }; - - }; - - hdmi-encoder@39 { - compatible = "adi,adv7511w"; - reg = <0x39>, <0x3f>, <0x3c>, <0x38>; - reg-names = "main", "edid", "cec", "packet"; - interrupt-parent = <&gpio1>; - interrupts = <28 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&thc63lvd1024_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - hdmi-decoder@4c { - compatible = "adi,adv7612"; - reg = <0x4c>; - default-input = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adv7612_in: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - - port@2 { - reg = <2>; - - /* - * The VIN4 video input path is shared between - * CVBS and HDMI inputs through SW[49-53] - * switches. - * - * CVBS is the default selection, leave HDMI - * not connected here. - */ - adv7612_out: endpoint { - pclk-sample = <0>; - hsync-active = <0>; - vsync-active = <0>; - }; - }; - }; - }; - - cs2000: clk-multiplier@4f { - #clock-cells = <0>; - compatible = "cirrus,cs2000-cp"; - reg = <0x4f>; - clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */ - clock-names = "clk_in", "ref_clk"; - - assigned-clocks = <&cs2000>; - assigned-clock-rates = <24576000>; /* 1/1 divide */ - }; - - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&lvds0 { - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x12_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; - -&lvds1 { - /* - * Even though the LVDS1 output is not connected, the encoder must be - * enabled to supply a pixel clock to the DU for the DPAD output when - * LVDS0 is in use. - */ - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x12_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; -}; - -&ohci0 { - dr_mode = "host"; - status = "okay"; -}; - -&pfc { - avb0_pins: avb { - groups = "avb0_link", "avb0_mdio", "avb0_mii"; - function = "avb0"; - }; - - can0_pins: can0 { - groups = "can0_data_a"; - function = "can0"; - }; - - can1_pins: can1 { - groups = "can1_data_a"; - function = "can1"; - }; - - du_pins: du { - groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - function = "du"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; - }; - - keys_pins: keys { - pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15"; - bias-pull-up; - }; - - pwm0_pins: pwm0 { - groups = "pwm0_c"; - function = "pwm0"; - }; - - pwm1_pins: pwm1 { - groups = "pwm1_c"; - function = "pwm1"; - }; - - scif2_pins: scif2 { - groups = "scif2_data"; - function = "scif2"; - }; - - sdhi2_pins: sd2 { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; - - sound_pins: sound { - groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a"; - function = "ssi"; - }; - - sound_clk_pins: sound-clk { - groups = "audio_clk_a", "audio_clk_b", - "audio_clkout", "audio_clkout1"; - function = "audio_clk"; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - vin4_pins_cvbs: vin4 { - groups = "vin4_data8", "vin4_sync", "vin4_clk"; - function = "vin4"; - }; -}; - -&pwm0 { - pinctrl-0 = <&pwm0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm1 { - pinctrl-0 = <&pwm1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - /* audio_clkout0/1 */ - #clock-cells = <1>; - clock-frequency = <12288000 11289600>; - - status = "okay"; - - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, - <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&cs2000>, <&audio_clk_b>, - <&cpg CPG_CORE R8A77995_CLK_ZA2>; - - ports { - rsnd_port0: port { - rsnd_for_ak4613: endpoint { - remote-endpoint = <&ak4613_endpoint>; - dai-format = "left_j"; - bitclock-master = <&rsnd_for_ak4613>; - frame-master = <&rsnd_for_ak4613>; - playback = <&ssi3>, <&src5>, <&dvc0>; - capture = <&ssi4>, <&src6>, <&dvc1>; - }; - }; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi2 { - /* used for on-board eMMC */ - pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - bus-width = <8>; - mmc-hs200-1_8v; - no-sd; - no-sdio; - non-removable; - status = "okay"; -}; - -&ssi4 { - shared-pin; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - renesas,no-otg-pins; - status = "okay"; -}; - -&vin4 { - pinctrl-0 = <&vin4_pins_cvbs>; - pinctrl-names = "default"; - - status = "okay"; - - ports { - port { - vin4_in: endpoint { - remote-endpoint = <&adv7180_out>; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi index a0a1a1d..cd2f0d6 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -6,6 +6,7 @@ */ #include +#include #include #include "r8a779a0.dtsi" @@ -22,6 +23,37 @@ stdout-path = "serial0:115200n8"; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW47"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio6 19 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW48"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio6 20 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW49"; + wakeup-source; + debounce-interval = <20>; + }; + }; + leds { compatible = "gpio-leds"; @@ -160,12 +192,22 @@ function = "i2c6"; }; + keys_pins: keys { + pins = "GP_6_18", "GP_6_19", "GP_6_20"; + bias-pull-up; + }; + mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; power-source = <1800>; }; + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + scif0_pins: scif0 { groups = "scif0_data", "scif0_ctrl"; function = "scif0"; @@ -177,6 +219,34 @@ }; }; +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x0 0xcc0000>; + read-only; + }; + user@cc0000 { + reg = <0xcc0000 0x3340000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index dc671ff..e46dc9a 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -27,6 +27,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 631d520..43bf2cb 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -933,6 +933,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a779a0", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = ; + clocks = <&cpg CPG_MOD 718>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 718>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a779a0", "renesas,rcar-gen3-msiof"; @@ -1023,6 +1034,902 @@ status = "disabled"; }; + vin00: video@e6ef0000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 730>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 730>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin00isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin00>; + }; + }; + }; + }; + + vin01: video@e6ef1000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 731>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 731>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin01isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin01>; + }; + }; + }; + }; + + vin02: video@e6ef2000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 800>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 800>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin02isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin02>; + }; + }; + }; + }; + + vin03: video@e6ef3000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 801>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 801>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin03isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin03>; + }; + }; + }; + }; + + vin04: video@e6ef4000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 802>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin04isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin04>; + }; + }; + }; + }; + + vin05: video@e6ef5000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 803>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 803>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin05isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin05>; + }; + }; + }; + }; + + vin06: video@e6ef6000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 804>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin06isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin06>; + }; + }; + }; + }; + + vin07: video@e6ef7000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 805>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin07isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin07>; + }; + }; + }; + }; + + vin08: video@e6ef8000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <8>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin08isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin08>; + }; + }; + }; + }; + + vin09: video@e6ef9000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <9>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin09isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin09>; + }; + }; + }; + }; + + vin10: video@e6efa000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 808>; + renesas,id = <10>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin10isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin10>; + }; + }; + }; + }; + + vin11: video@e6efb000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <11>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin11isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin11>; + }; + }; + }; + }; + + vin12: video@e6efc000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 810>; + renesas,id = <12>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin12isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin12>; + }; + }; + }; + }; + + vin13: video@e6efd000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <13>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin13isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin13>; + }; + }; + }; + }; + + vin14: video@e6efe000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 812>; + renesas,id = <14>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin14isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin14>; + }; + }; + }; + }; + + vin15: video@e6eff000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 813>; + renesas,id = <15>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin15isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin15>; + }; + }; + }; + }; + + vin16: video@e6ed0000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed0000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 814>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 814>; + renesas,id = <16>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin16isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin16>; + }; + }; + }; + }; + + vin17: video@e6ed1000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed1000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 815>; + renesas,id = <17>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin17isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin17>; + }; + }; + }; + }; + + vin18: video@e6ed2000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed2000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 816>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 816>; + renesas,id = <18>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin18isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin18>; + }; + }; + }; + }; + + vin19: video@e6ed3000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed3000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 817>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 817>; + renesas,id = <19>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin19isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin19>; + }; + }; + }; + }; + + vin20: video@e6ed4000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed4000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 818>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 818>; + renesas,id = <20>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin20isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin20>; + }; + }; + }; + }; + + vin21: video@e6ed5000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed5000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 819>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 819>; + renesas,id = <21>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin21isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin21>; + }; + }; + }; + }; + + vin22: video@e6ed6000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed6000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 820>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 820>; + renesas,id = <22>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin22isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin22>; + }; + }; + }; + }; + + vin23: video@e6ed7000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed7000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 821>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 821>; + renesas,id = <23>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin23isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin23>; + }; + }; + }; + }; + + vin24: video@e6ed8000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed8000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 822>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 822>; + renesas,id = <24>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin24isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin24>; + }; + }; + }; + }; + + vin25: video@e6ed9000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed9000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 823>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 823>; + renesas,id = <25>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin25isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin25>; + }; + }; + }; + }; + + vin26: video@e6eda000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6eda000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 824>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 824>; + renesas,id = <26>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin26isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin26>; + }; + }; + }; + }; + + vin27: video@e6edb000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6edb000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 825>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 825>; + renesas,id = <27>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin27isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin27>; + }; + }; + }; + }; + + vin28: video@e6edc000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6edc000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 826>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 826>; + renesas,id = <28>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin28isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin28>; + }; + }; + }; + }; + + vin29: video@e6edd000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6edd000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 827>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 827>; + renesas,id = <29>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin29isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin29>; + }; + }; + }; + }; + + vin30: video@e6ede000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ede000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 828>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 828>; + renesas,id = <30>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin30isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin30>; + }; + }; + }; + }; + + vin31: video@e6edf000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6edf000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 829>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 829>; + renesas,id = <31>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin31isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin31>; + }; + }; + }; + }; + dmac1: dma-controller@e7350000 { compatible = "renesas,dmac-r8a779a0"; reg = <0 0xe7350000 0 0x1000>, @@ -1090,9 +1997,124 @@ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 706>; max-frequency = <200000000>; + iommus = <&ipmmu_ds0 32>; status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a779a0-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD 629>; + clock-names = "rpc"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 629>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ipmmu_rt0: iommu@ee480000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xee480000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt1: iommu@ee4c0000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xee4c0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 19>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds0: iommu@eed00000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeed00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: iommu@eed40000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeed40000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: iommu@eed80000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeed80000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A779A0_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: iommu@eedc0000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeedc0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: iommu@eee80000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeee80000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi1: iommu@eeec0000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeeec0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 15>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_3dg: iommu@eee00000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeee00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: iommu@eef00000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeef00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: iommu@eef40000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeef40000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 11>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: iommu@eefc0000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeefc0000 0 0x20000>; + interrupts = , + ; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + gic: interrupt-controller@f1000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -1142,6 +2164,442 @@ renesas,fcp = <&fcpvd1>; }; + csi40: csi2@feaa0000 { + compatible = "renesas,r8a779a0-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 331>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi40isp0: endpoint { + remote-endpoint = <&isp0csi40>; + }; + }; + }; + }; + + csi41: csi2@feab0000 { + compatible = "renesas,r8a779a0-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 400>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 400>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi41isp1: endpoint { + remote-endpoint = <&isp1csi41>; + }; + }; + }; + }; + + csi42: csi2@fed60000 { + compatible = "renesas,r8a779a0-csi2"; + reg = <0 0xfed60000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 401>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 401>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi42isp2: endpoint { + remote-endpoint = <&isp2csi42>; + }; + }; + }; + }; + + csi43: csi2@fed70000 { + compatible = "renesas,r8a779a0-csi2"; + reg = <0 0xfed70000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi43isp3: endpoint { + remote-endpoint = <&isp3csi43>; + }; + }; + }; + }; + + isp0: isp@fed00000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0 0xfed00000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A779A0_PD_A3ISP01>; + resets = <&cpg 612>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp0csi40: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi40isp0>; + }; + }; + + port@1 { + reg = <1>; + isp0vin00: endpoint { + remote-endpoint = <&vin00isp0>; + }; + }; + + port@2 { + reg = <2>; + isp0vin01: endpoint { + remote-endpoint = <&vin01isp0>; + }; + }; + + port@3 { + reg = <3>; + isp0vin02: endpoint { + remote-endpoint = <&vin02isp0>; + }; + }; + + port@4 { + reg = <4>; + isp0vin03: endpoint { + remote-endpoint = <&vin03isp0>; + }; + }; + + port@5 { + reg = <5>; + isp0vin04: endpoint { + remote-endpoint = <&vin04isp0>; + }; + }; + + port@6 { + reg = <6>; + isp0vin05: endpoint { + remote-endpoint = <&vin05isp0>; + }; + }; + + port@7 { + reg = <7>; + isp0vin06: endpoint { + remote-endpoint = <&vin06isp0>; + }; + }; + + port@8 { + reg = <8>; + isp0vin07: endpoint { + remote-endpoint = <&vin07isp0>; + }; + }; + }; + }; + + isp1: isp@fed20000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0 0xfed20000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A779A0_PD_A3ISP01>; + resets = <&cpg 613>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp1csi41: endpoint@1 { + reg = <1>; + remote-endpoint = <&csi41isp1>; + }; + }; + + port@1 { + reg = <1>; + isp1vin08: endpoint { + remote-endpoint = <&vin08isp1>; + }; + }; + + port@2 { + reg = <2>; + isp1vin09: endpoint { + remote-endpoint = <&vin09isp1>; + }; + }; + + port@3 { + reg = <3>; + isp1vin10: endpoint { + remote-endpoint = <&vin10isp1>; + }; + }; + + port@4 { + reg = <4>; + isp1vin11: endpoint { + remote-endpoint = <&vin11isp1>; + }; + }; + + port@5 { + reg = <5>; + isp1vin12: endpoint { + remote-endpoint = <&vin12isp1>; + }; + }; + + port@6 { + reg = <6>; + isp1vin13: endpoint { + remote-endpoint = <&vin13isp1>; + }; + }; + + port@7 { + reg = <7>; + isp1vin14: endpoint { + remote-endpoint = <&vin14isp1>; + }; + }; + + port@8 { + reg = <8>; + isp1vin15: endpoint { + remote-endpoint = <&vin15isp1>; + }; + }; + }; + }; + + isp2: isp@fed30000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0 0xfed30000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 614>; + power-domains = <&sysc R8A779A0_PD_A3ISP23>; + resets = <&cpg 614>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp2csi42: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi42isp2>; + }; + }; + + port@1 { + reg = <1>; + isp2vin16: endpoint { + remote-endpoint = <&vin16isp2>; + }; + }; + + port@2 { + reg = <2>; + isp2vin17: endpoint { + remote-endpoint = <&vin17isp2>; + }; + }; + + port@3 { + reg = <3>; + isp2vin18: endpoint { + remote-endpoint = <&vin18isp2>; + }; + }; + + port@4 { + reg = <4>; + isp2vin19: endpoint { + remote-endpoint = <&vin19isp2>; + }; + }; + + port@5 { + reg = <5>; + isp2vin20: endpoint { + remote-endpoint = <&vin20isp2>; + }; + }; + + port@6 { + reg = <6>; + isp2vin21: endpoint { + remote-endpoint = <&vin21isp2>; + }; + }; + + port@7 { + reg = <7>; + isp2vin22: endpoint { + remote-endpoint = <&vin22isp2>; + }; + }; + + port@8 { + reg = <8>; + isp2vin23: endpoint { + remote-endpoint = <&vin23isp2>; + }; + }; + }; + }; + + isp3: isp@fed40000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0 0xfed40000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A779A0_PD_A3ISP23>; + resets = <&cpg 615>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp3csi43: endpoint@1 { + reg = <1>; + remote-endpoint = <&csi43isp3>; + }; + }; + + port@1 { + reg = <1>; + isp3vin24: endpoint { + remote-endpoint = <&vin24isp3>; + }; + }; + + port@2 { + reg = <2>; + isp3vin25: endpoint { + remote-endpoint = <&vin25isp3>; + }; + }; + + port@3 { + reg = <3>; + isp3vin26: endpoint { + remote-endpoint = <&vin26isp3>; + }; + }; + + port@4 { + reg = <4>; + isp3vin27: endpoint { + remote-endpoint = <&vin27isp3>; + }; + }; + + port@5 { + reg = <5>; + isp3vin28: endpoint { + remote-endpoint = <&vin28isp3>; + }; + }; + + port@6 { + reg = <6>; + isp3vin29: endpoint { + remote-endpoint = <&vin29isp3>; + }; + }; + + port@7 { + reg = <7>; + isp3vin30: endpoint { + remote-endpoint = <&vin30isp3>; + }; + }; + + port@8 { + reg = <8>; + isp3vin31: endpoint { + remote-endpoint = <&vin31isp3>; + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; diff --git a/arch/arm64/boot/dts/renesas/r8a779m0.dtsi b/arch/arm64/boot/dts/renesas/r8a779m0.dtsi new file mode 100644 index 0000000..6fb1979 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m0.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car H3e (R8A779M0) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77951.dtsi" + +/ { + compatible = "renesas,r8a779m0", "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi index 0e9b044..b6e855f 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi @@ -10,3 +10,12 @@ / { compatible = "renesas,r8a779m1", "renesas,r8a7795"; }; + +&cluster0_opp { + opp-2000000000 { + opp-hz = /bits/ 64 <2000000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m2.dtsi b/arch/arm64/boot/dts/renesas/r8a779m2.dtsi new file mode 100644 index 0000000..3246273 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m2.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car M3e (R8A779M2) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77961.dtsi" + +/ { + compatible = "renesas,r8a779m2", "renesas,r8a77961"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi index 65bb618..6cff38a 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi @@ -10,3 +10,12 @@ / { compatible = "renesas,r8a779m3", "renesas,r8a77961"; }; + +&cluster0_opp { + opp-2000000000 { + opp-hz = /bits/ 64 <2000000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m4.dtsi b/arch/arm64/boot/dts/renesas/r8a779m4.dtsi new file mode 100644 index 0000000..d7fbb6c --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m4.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car M3Ne (R8A779M4) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77965.dtsi" + +/ { + compatible = "renesas,r8a779m4", "renesas,r8a77965"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts new file mode 100644 index 0000000..c0341a8 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3Ne-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77965-salvator-xs.dts + * Copyright (C) 2017 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779m5.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a779m5"; + compatible = "renesas,salvator-xs", "renesas,r8a779m5", + "renesas,r8a77965"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock6 1>, + <&x21_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi new file mode 100644 index 0000000..8c9c055 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car M3Ne-2G (R8A779M5) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77965.dtsi" + +/ { + compatible = "renesas,r8a779m5", "renesas,r8a77965"; +}; + +&cluster0_opp { + opp-2000000000 { + opp-hz = /bits/ 64 <2000000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m6.dtsi b/arch/arm64/boot/dts/renesas/r8a779m6.dtsi new file mode 100644 index 0000000..afe3cab --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m6.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car E3e (R8A779M6) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77990.dtsi" + +/ { + compatible = "renesas,r8a779m6", "renesas,r8a77990"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m7.dtsi b/arch/arm64/boot/dts/renesas/r8a779m7.dtsi new file mode 100644 index 0000000..4958bab --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m7.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car D3e (R8A779M7) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77995.dtsi" + +/ { + compatible = "renesas,r8a779m7", "renesas,r8a77995"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m8.dtsi b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi new file mode 100644 index 0000000..752440b --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car H3Ne (R8A779M8) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77951.dtsi" + +/ { + compatible = "renesas,r8a779m8", "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 5f3bc28..485ef5f 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -13,6 +13,20 @@ #address-cells = <2>; #size-cells = <2>; + audio_clk1: audio_clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + audio_clk2: audio_clk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; @@ -78,6 +92,90 @@ #size-cells = <2>; ranges; + ssi0: ssi@10049c00 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x10049c00 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI0_RST_M2_REG>; + dmas = <&dmac 0x2655>, <&dmac 0x2656>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi1: ssi@1004a000 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a000 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI1_RST_M2_REG>; + dmas = <&dmac 0x2659>, <&dmac 0x265a>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi2: ssi@1004a400 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a400 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI2_RST_M2_REG>; + dmas = <&dmac 0x265f>; + dma-names = "rt"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi3: ssi@1004a800 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a800 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI3_RST_M2_REG>; + dmas = <&dmac 0x2661>, <&dmac 0x2662>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + scif0: serial@1004b800 { compatible = "renesas,scif-r9a07g044"; reg = <0 0x1004b800 0 0x400>; @@ -260,6 +358,23 @@ }; }; + sbc: spi@10060000 { + compatible = "renesas,r9a07g044-rpc-if", + "renesas,rzg2l-rpc-if"; + reg = <0 0x10060000 0 0x10000>, + <0 0x20000000 0 0x10000000>, + <0 0x10070000 0 0x10000>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>, + <&cpg CPG_MOD R9A07G044_SPI_CLK>; + resets = <&cpg R9A07G044_SPI_RST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g044-cpg"; reg = <0 0x11010000 0 0x10000>; @@ -295,6 +410,42 @@ <&cpg R9A07G044_GPIO_SPARE_RESETN>; }; + dmac: dma-controller@11820000 { + compatible = "renesas,r9a07g044-dmac", + "renesas,rz-dmac"; + reg = <0 0x11820000 0 0x10000>, + <0 0x11830000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>, + <&cpg CPG_MOD R9A07G044_DMAC_PCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_DMAC_ARESETN>, + <&cpg R9A07G044_DMAC_RST_ASYNC>; + #dma-cells = <1>; + dma-channels = <16>; + }; + gic: interrupt-controller@11900000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -304,6 +455,192 @@ <0x0 0x11940000 0 0x60000>; interrupts = ; }; + + sdhi0: mmc@11c00000 { + compatible = "renesas,sdhi-r9a07g044", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c00000 0 0x10000>; + interrupts = , + ; + clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>, + <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>, + <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>, + <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>; + clock-names = "imclk", "imclk2", "clk_hs", "aclk"; + resets = <&cpg R9A07G044_SDHI0_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi1: mmc@11c10000 { + compatible = "renesas,sdhi-r9a07g044", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c10000 0 0x10000>; + interrupts = , + ; + clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>, + <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>, + <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>, + <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>; + clock-names = "imclk", "imclk2", "clk_hs", "aclk"; + resets = <&cpg R9A07G044_SDHI1_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + eth0: ethernet@11c20000 { + compatible = "renesas,r9a07g044-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c20000 0 0x10000>; + interrupts = , + , + ; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G044_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A07G044_ETH0_CLK_CHI>, + <&cpg CPG_CORE R9A07G044_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G044_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + eth1: ethernet@11c30000 { + compatible = "renesas,r9a07g044-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = , + , + ; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G044_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A07G044_ETH1_CLK_CHI>, + <&cpg CPG_CORE R9A07G044_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G044_ETH1_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + phyrst: usbphy-ctrl@11c40000 { + compatible = "renesas,r9a07g044-usbphy-ctrl", + "renesas,rzg2l-usbphy-ctrl"; + reg = <0 0x11c40000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>; + resets = <&cpg R9A07G044_USB_PRESETN>; + power-domains = <&cpg>; + #reset-cells = <1>; + status = "disabled"; + }; + + ohci0: usb@11c50000 { + compatible = "generic-ohci"; + reg = <0 0x11c50000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G044_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@11c70000 { + compatible = "generic-ohci"; + reg = <0 0x11c70000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G044_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@11c50100 { + compatible = "generic-ehci"; + reg = <0 0x11c50100 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G044_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@11c70100 { + compatible = "generic-ehci"; + reg = <0 0x11c70100 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G044_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@11c50200 { + compatible = "renesas,usb2-phy-r9a07g044", + "renesas,rzg2l-usb2-phy"; + reg = <0 0x11c50200 0 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; + resets = <&phyrst 0>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@11c70200 { + compatible = "renesas,usb2-phy-r9a07g044", + "renesas,rzg2l-usb2-phy"; + reg = <0 0x11c70200 0 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; + resets = <&phyrst 1>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + hsusb: usb@11c60000 { + compatible = "renesas,usbhs-r9a07g044", + "renesas,rza2-usbhs"; + reg = <0 0x11c60000 0 0x10000>; + interrupts = , + , + , + ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G044_USB_U2P_EXL_SYSRST>; + renesas,buswait = <7>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; }; timer { diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts index d3f72ec..247b0b3 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts @@ -7,15 +7,10 @@ /dts-v1/; #include "r9a07g044l2.dtsi" +#include "rzg2l-smarc-som.dtsi" #include "rzg2l-smarc.dtsi" / { model = "Renesas SMARC EVK based on r9a07g044l2"; compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044"; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; - }; }; diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi new file mode 100644 index 0000000..7e84a29 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L SMARC SOM common parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include +#include + +/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */ +#define EMMC 1 + +/* + * To enable uSD card on CN3, + * SW1[2] should be at position 3/ON. + * Disable eMMC by setting "#define EMMC 0" above. + */ +#define SDHI (!EMMC) + +/ { + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <3300000 1>, <1800000 0>; + regulator-boot-on; + gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; +}; + +&adc { + pinctrl-0 = <&adc_pins>; + pinctrl-names = "default"; + status = "okay"; + + /delete-node/ channel@6; + /delete-node/ channel@7; +}; + +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy1: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&extal_clk { + clock-frequency = <24000000>; +}; + +&pinctrl { + adc_pins: adc { + pinmux = ; /* ADC_TRG */ + }; + + eth0_pins: eth0 { + pinmux = , /* ET0_LINKSTA */ + , /* ET0_MDC */ + , /* ET0_MDIO */ + , /* ET0_TXC */ + , /* ET0_TX_CTL */ + , /* ET0_TXD0 */ + , /* ET0_TXD1 */ + , /* ET0_TXD2 */ + , /* ET0_TXD3 */ + , /* ET0_RXC */ + , /* ET0_RX_CTL */ + , /* ET0_RXD0 */ + , /* ET0_RXD1 */ + , /* ET0_RXD2 */ + ; /* ET0_RXD3 */ + }; + + eth1_pins: eth1 { + pinmux = , /* ET1_LINKSTA */ + , /* ET1_MDC */ + , /* ET1_MDIO */ + , /* ET1_TXC */ + , /* ET1_TX_CTL */ + , /* ET1_TXD0 */ + , /* ET1_TXD1 */ + , /* ET1_TXD2 */ + , /* ET1_TXD3 */ + , /* ET1_RXC */ + , /* ET1_RX_CTL */ + , /* ET1_RXD0 */ + , /* ET1_RXD1 */ + , /* ET1_RXD2 */ + ; /* ET1_RXD3 */ + }; + + gpio-sd0-pwr-en-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "gpio_sd0_pwr_en"; + }; + + /* + * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] + * The below switch logic can be used to select the device between + * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT. + * SW1[2] should be at position 2/OFF to enable 64 GB eMMC + * SW1[2] should be at position 3/ON to enable uSD card CN3 + */ + sd0-dev-sel-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "sd0_dev_sel"; + }; + + sdhi0_emmc_pins: sd0emmc { + sd0_emmc_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", + "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; + power-source = <1800>; + }; + + sd0_emmc_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_emmc_rst { + pins = "SD0_RST#"; + power-source = <1800>; + }; + }; + + sdhi0_pins: sd0 { + sd0_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <3300>; + }; + + sd0_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <3300>; + }; + + sd0_mux { + pinmux = ; /* SD0_CD */ + }; + }; + + sdhi0_pins_uhs: sd0_uhs { + sd0_data_uhs { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <1800>; + }; + + sd0_ctrl_uhs { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_mux_uhs { + pinmux = ; /* SD0_CD */ + }; + }; +}; + +#if SDHI +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; +#endif + +#if EMMC +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; +#endif diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index adcd4f5..2863e48 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -6,22 +6,308 @@ */ #include +#include + +/* + * SSI-WM8978 + * + * This command is required when Playback/Capture + * + * amixer cset name='Left Input Mixer L2 Switch' on + * amixer cset name='Right Input Mixer R2 Switch' on + * amixer cset name='Headphone Playback Volume' 100 + * amixer cset name='PCM Volume' 100% + * amixer cset name='Input PGA Volume' 25 + * + */ / { aliases { serial0 = &scif0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c3 = &i2c3; }; chosen { - bootargs = "ignore_loglevel"; stdout-path = "serial0:115200n8"; }; + + audio_mclock: audio_mclock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + snd_rzg2l: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,widgets = "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "L2", "Mic Bias", + "R2", "Mic Bias", + "Mic Bias", "Microphone Jack"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssi0>; + }; + + codec_dai: simple-audio-card,codec { + clocks = <&audio_mclock>; + sound-dai = <&wm8978>; + }; + }; + + usb0_vbus_otg: regulator-usb0-vbus-otg { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS_OTG"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; +}; + +&audio_clk1{ + clock-frequency = <11289600>; +}; + +&audio_clk2{ + clock-frequency = <12288000>; +}; + +&canfd { + pinctrl-0 = <&can0_pins &can1_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; + + channel1 { + status = "okay"; + }; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; + + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; + }; }; -&extal_clk { - clock-frequency = <24000000>; +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&phyrst { + status = "okay"; +}; + +&pinctrl { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + can0_pins: can0 { + pinmux = , /* TX */ + ; /* RX */ + }; + + /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ + can0-stb { + gpio-hog; + gpios = ; + output-low; + line-name = "can0_stb"; + }; + + can1_pins: can1 { + pinmux = , /* TX */ + ; /* RX */ + }; + + /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ + can1-stb { + gpio-hog; + gpios = ; + output-low; + line-name = "can1_stb"; + }; + + i2c0_pins: i2c0 { + pins = "RIIC0_SDA", "RIIC0_SCL"; + input-enable; + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + i2c3_pins: i2c3 { + pinmux = , /* SDA */ + ; /* SCL */ + }; + + scif0_pins: scif0 { + pinmux = , /* TxD */ + ; /* RxD */ + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + sd1_mux { + pinmux = ; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1_uhs { + sd1_data_uhs { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + sd1_ctrl_uhs { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + sd1_mux_uhs { + pinmux = ; /* SD1_CD */ + }; + }; + + sound_clk_pins: sound_clk { + pins = "AUDIO_CLK1", "AUDIO_CLK2"; + input-enable; + }; + + ssi0_pins: ssi0 { + pinmux = , /* BCK */ + , /* RCK */ + , /* TXD */ + ; /* RXD */ + }; + + usb0_pins: usb0 { + pinmux = , /* VBUS */ + , /* OVC */ + ; /* OTG_ID */ + }; + + usb1_pins: usb1 { + pinmux = , /* VBUS */ + ; /* OVC */ + }; }; &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi1>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&ssi0 { + pinctrl-0 = <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&usb0_vbus_otg>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index eb1f3b8..bf37777 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -340,6 +340,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; @@ -524,47 +526,49 @@ reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", "infoframe", "cbus", "cec", "sdp", "txa", "txb" ; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio6>; interrupt-names = "intrq1", "intrq2"; interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>; - port@7 { - reg = <7>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; - adv7482_ain7: endpoint { - remote-endpoint = <&cvbs_con>; + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_con>; + }; }; - }; - port@8 { - reg = <8>; + port@8 { + reg = <8>; - adv7482_hdmi: endpoint { - remote-endpoint = <&hdmi_in_con>; + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; }; - }; - port@a { - reg = <10>; + port@a { + reg = <10>; - adv7482_txa: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; }; - }; - port@b { - reg = <11>; + port@b { + reg = <11>; - adv7482_txb: endpoint { - clock-lanes = <0>; - data-lanes = <1>; - remote-endpoint = <&csi20_in>; + adv7482_txb: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&csi20_in>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 1f177af..7edffe7 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -154,6 +154,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 7fdb41d..479906f 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb @@ -24,6 +25,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-dumo.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb @@ -42,8 +44,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb @@ -51,4 +56,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index c1ce9c2..848bc39 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -114,6 +114,10 @@ cpu-supply = <&vdd_arm>; }; +&csi_dphy { + status = "okay"; +}; + &display_subsystem { status = "okay"; }; @@ -428,6 +432,36 @@ }; }; +&i2c2 { + status = "okay"; + + clock-frequency = <100000>; + + /* These are relatively safe rise/fall times; TODO: measure */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + ov5695: ov5695@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + avdd-supply = <&vcc2v8_dvp>; + clocks = <&cru SCLK_CIF_OUT>; + clock-names = "xvclk"; + dvdd-supply = <&vcc1v5_dvp>; + dovdd-supply = <&vcc1v8_dvp>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2>; + }; + }; + }; +}; + &i2s1_2ch { status = "okay"; }; @@ -443,6 +477,24 @@ vccio6-supply = <&vccio_flash>; }; +&isp { + status = "okay"; + + ports { + port@0 { + mipi_in_ucam: endpoint@0 { + reg = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ucam_out>; + }; + }; + }; +}; + +&isp_mmu { + status = "okay"; +}; + &pinctrl { headphone { hp_det: hp-det { diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 248ebb6..00f50b0 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -110,7 +110,7 @@ }; }; - cpu0_opp_table: cpu0-opp-table { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -864,6 +864,19 @@ status = "disabled"; }; + csi_dphy: phy@ff2f0000 { + compatible = "rockchip,px30-csi-dphy"; + reg = <0x0 0xff2f0000 0x0 0x4000>; + clocks = <&cru PCLK_MIPICSIPHY>; + clock-names = "pclk"; + #phy-cells = <0>; + power-domains = <&power PX30_PD_VI>; + resets = <&cru SRST_MIPICSIPHY_P>; + reset-names = "apb"; + rockchip,grf = <&grf>; + status = "disabled"; + }; + usb20_otg: usb@ff300000 { compatible = "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2"; @@ -974,6 +987,18 @@ status = "disabled"; }; + sfc: spi@ff3a0000 { + compatible = "rockchip,sfc"; + reg = <0x0 0xff3a0000 0x0 0x4000>; + interrupts = ; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>; + pinctrl-names = "default"; + power-domains = <&power PX30_PD_MMC_NAND>; + status = "disabled"; + }; + nfc: nand-controller@ff3b0000 { compatible = "rockchip,px30-nfc"; reg = <0x0 0xff3b0000 0x0 0x4000>; @@ -989,7 +1014,7 @@ status = "disabled"; }; - gpu_opp_table: opp-table2 { + gpu_opp_table: opp-table-1 { compatible = "operating-points-v2"; opp-200000000 { @@ -1024,6 +1049,28 @@ status = "disabled"; }; + vpu: video-codec@ff442000 { + compatible = "rockchip,px30-vpu"; + reg = <0x0 0xff442000 0x0 0x800>; + interrupts = , + ; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power PX30_PD_VPU>; + }; + + vpu_mmu: iommu@ff442800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff442800 0x0 0x100>; + interrupts = ; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power PX30_PD_VPU>; + }; + dsi: dsi@ff450000 { compatible = "rockchip,px30-mipi-dsi"; reg = <0x0 0xff450000 0x0 0x10000>; @@ -1142,6 +1189,47 @@ status = "disabled"; }; + isp: isp@ff4a0000 { + compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/ + reg = <0x0 0xff4a0000 0x0 0x8000>; + interrupts = , + , + ; + interrupt-names = "isp", "mi", "mipi"; + clocks = <&cru SCLK_ISP>, + <&cru ACLK_ISP>, + <&cru HCLK_ISP>, + <&cru PCLK_ISP>; + clock-names = "isp", "aclk", "hclk", "pclk"; + iommus = <&isp_mmu>; + phys = <&csi_dphy>; + phy-names = "dphy"; + power-domains = <&power PX30_PD_VI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + isp_mmu: iommu@ff4a8000 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff4a8000 0x0 0x100>; + interrupts = ; + clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>; + clock-names = "aclk", "iface"; + power-domains = <&power PX30_PD_VI>; + rockchip,disable-mmu-reset; + #iommu-cells = <0>; + }; + qos_gmac: qos@ff518000 { compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff518000 0x0 0x20>; @@ -1250,7 +1338,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff040000 { + gpio0: gpio@ff040000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff040000 0x0 0x100>; interrupts = ; @@ -1262,7 +1350,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@ff250000 { + gpio1: gpio@ff250000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff250000 0x0 0x100>; interrupts = ; @@ -1274,7 +1362,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@ff260000 { + gpio2: gpio@ff260000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff260000 0x0 0x100>; interrupts = ; @@ -1286,7 +1374,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@ff270000 { + gpio3: gpio@ff270000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff270000 0x0 0x100>; interrupts = ; @@ -1973,6 +2061,32 @@ }; }; + sfc { + sfc_bus4: sfc-bus4 { + rockchip,pins = + <1 RK_PA0 3 &pcfg_pull_none>, + <1 RK_PA1 3 &pcfg_pull_none>, + <1 RK_PA2 3 &pcfg_pull_none>, + <1 RK_PA3 3 &pcfg_pull_none>; + }; + + sfc_bus2: sfc-bus2 { + rockchip,pins = + <1 RK_PA0 3 &pcfg_pull_none>, + <1 RK_PA1 3 &pcfg_pull_none>; + }; + + sfc_cs0: sfc-cs0 { + rockchip,pins = + <1 RK_PA4 3 &pcfg_pull_none>; + }; + + sfc_clk: sfc-clk { + rockchip,pins = + <1 RK_PB1 3 &pcfg_pull_none>; + }; + }; + lcdc { lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin { rockchip,pins = diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index a185901..1cbe212 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -99,7 +99,7 @@ }; }; - cpu0_opp_table: cpu0-opp-table { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -731,6 +731,17 @@ status = "disabled"; }; + sfc: spi@ff4c0000 { + compatible = "rockchip,sfc"; + reg = <0x0 0xff4c0000 0x0 0x4000>; + interrupts = ; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>; + pinctrl-names = "default"; + status = "disabled"; + }; + cru: clock-controller@ff500000 { compatible = "rockchip,rk3308-cru"; reg = <0x0 0xff500000 0x0 0x1000>; @@ -779,7 +790,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff220000 { + gpio0: gpio@ff220000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff220000 0x0 0x100>; interrupts = ; @@ -790,7 +801,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@ff230000 { + gpio1: gpio@ff230000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff230000 0x0 0x100>; interrupts = ; @@ -801,7 +812,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@ff240000 { + gpio2: gpio@ff240000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff240000 0x0 0x100>; interrupts = ; @@ -812,7 +823,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@ff250000 { + gpio3: gpio@ff250000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff250000 0x0 0x100>; interrupts = ; @@ -823,7 +834,7 @@ #interrupt-cells = <2>; }; - gpio4: gpio4@ff260000 { + gpio4: gpio@ff260000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff260000 0x0 0x100>; interrupts = ; @@ -1004,6 +1015,32 @@ }; }; + sfc { + sfc_bus4: sfc-bus4 { + rockchip,pins = + <3 RK_PA0 3 &pcfg_pull_none>, + <3 RK_PA1 3 &pcfg_pull_none>, + <3 RK_PA2 3 &pcfg_pull_none>, + <3 RK_PA3 3 &pcfg_pull_none>; + }; + + sfc_bus2: sfc-bus2 { + rockchip,pins = + <3 RK_PA0 3 &pcfg_pull_none>, + <3 RK_PA1 3 &pcfg_pull_none>; + }; + + sfc_cs0: sfc-cs0 { + rockchip,pins = + <3 RK_PA4 3 &pcfg_pull_none>; + }; + + sfc_clk: sfc-clk { + rockchip,pins = + <3 RK_PA5 3 &pcfg_pull_none>; + }; + }; + gmac { rmii_pins: rmii-pins { rockchip,pins = diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts index 763cf9b..43c928a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts @@ -185,7 +185,6 @@ assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; assigned-clock-rate = <50000000>; assigned-clocks = <&cru SCLK_MAC2PHY>; - clock_in_out = "output"; status = "okay"; }; @@ -194,8 +193,6 @@ }; &hdmi { - ddc-i2c-scl-high-time-ns = <9625>; - ddc-i2c-scl-low-time-ns = <10000>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 7fc674a..ea0695b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -207,7 +207,8 @@ gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; - vin-supply = <&vccsys>; + regulator-boot-on; + vin-supply = <&usb_midu>; }; }; @@ -311,6 +312,7 @@ vcc5-supply = <&vccsys>; vcc6-supply = <&vccsys>; vcc7-supply = <&vccsys>; + vcc8-supply = <&vccsys>; regulators { vdd_logic: DCDC_REG1 { @@ -460,6 +462,14 @@ regulator-suspend-microvolt = <3000000>; }; }; + + usb_midu: BOOST { + regulator-name = "usb_midu"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5400000>; + regulator-always-on; + regulator-boot-on; + }; }; rk817_codec: codec { @@ -517,6 +527,22 @@ status = "okay"; }; +&sfc { + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + }; +}; + &tsadc { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts new file mode 100644 index 0000000..e3e3984 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2021 T-Chip Intelligent Technology Co., Ltd + +/dts-v1/; + +#include + +#include "rk3328-roc-cc.dts" + +/ { + model = "Firefly ROC-RK3328-PC"; + compatible = "firefly,roc-rk3328-pc", "rockchip,rk3328"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1750000>; + + /* This button is unpopulated out of the factory. */ + button-recovery { + label = "Recovery"; + linux,code = ; + press-threshold-microvolt = <10000>; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + linux,rc-map-name = "rc-khadas"; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en>, <&wifi_host_wake>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + }; +}; + +&codec { + mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; +}; + +&gpu { + mali-supply = <&vdd_logic>; +}; + +&pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmcio { + sdio_per_pin: sdio-per-pin { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wifi { + wifi_en: wifi-en { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake: wifi-host-wake { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_4ma>; + }; + + bt_rst: bt-rst { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_en: bt-en { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmic_int_l { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; +}; + +&rk805 { + interrupt-parent = <&gpio0>; + interrupts = ; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&usb20_host_drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; +}; + +&vcc_host1_5v { + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; +}; + +&vcc_sdio { + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_per_pin>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 1b0f7e4..f69a38f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -345,7 +345,7 @@ &spi0 { status = "okay"; - spiflash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 8c821ac..39db0b8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -105,7 +105,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -599,7 +599,7 @@ gpu: gpu@ff300000 { compatible = "rockchip,rk3328-mali", "arm,mali-450"; - reg = <0x0 0xff300000 0x0 0x40000>; + reg = <0x0 0xff300000 0x0 0x30000>; interrupts = , , , @@ -623,7 +623,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff330200 0 0x100>; interrupts = ; - interrupt-names = "h265e_mmu"; clocks = <&cru ACLK_H265>, <&cru PCLK_H265>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -634,7 +633,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff340800 0x0 0x40>; interrupts = ; - interrupt-names = "vepu_mmu"; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -656,7 +654,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff350800 0x0 0x40>; interrupts = ; - interrupt-names = "vpu_mmu"; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -667,7 +664,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>; interrupts = ; - interrupt-names = "rkvdec_mmu"; clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -700,7 +696,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff373f00 0x0 0x100>; interrupts = ; - interrupt-names = "vop_mmu"; clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -1019,7 +1014,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff210000 { + gpio0: gpio@ff210000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff210000 0x0 0x100>; interrupts = ; @@ -1032,7 +1027,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@ff220000 { + gpio1: gpio@ff220000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff220000 0x0 0x100>; interrupts = ; @@ -1045,7 +1040,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@ff230000 { + gpio2: gpio@ff230000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff230000 0x0 0x100>; interrupts = ; @@ -1058,7 +1053,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@ff240000 { + gpio3: gpio@ff240000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff240000 0x0 0x100>; interrupts = ; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index bcd7977..5753e57 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -29,15 +29,15 @@ i2c-parent = <&i2c1>; mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; - /* Q7_GPO_I2C */ - i2c@0 { + /* Q7_GP0_I2C */ + i2c_gp0: i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; }; /* Q7_SMB */ - i2c@1 { + i2c_smb: i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; @@ -52,7 +52,7 @@ mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; /* Q7_LVDS_BLC_I2C */ - i2c@0 { + i2c_lvds_blc: i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -69,8 +69,8 @@ }; }; - /* Q7_GP2_I2C */ - i2c@1 { + /* Q7_GP2_I2C = LVDS_DID_CLK/DAT */ + i2c_gp2: i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; @@ -144,7 +144,7 @@ mmc-hs200-1_8v; non-removable; vmmc-supply = <&vcc33_io>; - vqmmc-supply = <&vcc18_io>; + vqmmc-supply = <&vcc_18>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; status = "okay"; @@ -238,13 +238,6 @@ regulator-boot-on; }; - vcc18_io: LDO_REG4 { - regulator-name = "vcc18_io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - vdd10_video: LDO_REG6 { regulator-name = "vdd10_video"; regulator-min-microvolt = <1000000>; @@ -253,6 +246,14 @@ regulator-boot-on; }; + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + vcc18_video: LDO_REG8 { regulator-name = "vcc18_video"; regulator-min-microvolt = <1800000>; @@ -272,6 +273,18 @@ status = "okay"; }; +/* The RK3368-uQ7 "Lion" has most IO voltages hardwired to 3.3V. */ +&io_domains { + audio-supply = <&vcc33_io>; + dvp-supply = <&vcc33_io>; + flash0-supply = <&vcc_18>; + gpio30-supply = <&vcc33_io>; + gpio1830-supply = <&vcc33_io>; + sdcard-supply = <&vcc33_io>; + wifi-supply = <&vcc33_io>; + status = "okay"; +}; + &pinctrl { leds { module_led_pins: module-led-pins { @@ -291,6 +304,12 @@ }; }; +&pmu_io_domains { + pmu-supply = <&vcc33_io>; + vop-supply = <&vcc33_io>; + status = "okay"; +}; + &spi1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 4c64fbe..c99da90 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -8,6 +8,7 @@ #include #include #include +#include #include #include @@ -615,6 +616,115 @@ status = "disabled"; }; + pmu: power-management@ff730000 { + compatible = "rockchip,rk3368-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff730000 0x0 0x1000>; + + power: power-controller { + compatible = "rockchip,rk3368-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* + * Note: Although SCLK_* are the working clocks + * of device without including on the NOC, needed for + * synchronous reset. + * + * The clocks on the which NOC: + * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU. + * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU. + * ACLK_RGA is on ACLK_RGA_NIU. + * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU. + * + * Which clock are device clocks: + * clocks devices + * *_IEP IEP:Image Enhancement Processor + * *_ISP ISP:Image Signal Processing + * *_VIP VIP:Video Input Processor + * *_VOP* VOP:Visual Output Processor + * *_RGA RGA + * *_EDP* EDP + * *_DPHY* LVDS + * *_HDMI HDMI + * *_MIPI_* MIPI + */ + power-domain@RK3368_PD_VIO { + reg = ; + clocks = <&cru ACLK_IEP>, + <&cru ACLK_ISP>, + <&cru ACLK_VIP>, + <&cru ACLK_RGA>, + <&cru ACLK_VOP>, + <&cru ACLK_VOP_IEP>, + <&cru DCLK_VOP>, + <&cru HCLK_IEP>, + <&cru HCLK_ISP>, + <&cru HCLK_RGA>, + <&cru HCLK_VIP>, + <&cru HCLK_VOP>, + <&cru HCLK_VIO_HDCPMMU>, + <&cru PCLK_EDP_CTRL>, + <&cru PCLK_HDMI_CTRL>, + <&cru PCLK_HDCP>, + <&cru PCLK_ISP>, + <&cru PCLK_VIP>, + <&cru PCLK_DPHYRX>, + <&cru PCLK_DPHYTX0>, + <&cru PCLK_MIPI_CSI>, + <&cru PCLK_MIPI_DSI0>, + <&cru SCLK_VOP0_PWM>, + <&cru SCLK_EDP_24M>, + <&cru SCLK_EDP>, + <&cru SCLK_HDCP>, + <&cru SCLK_ISP>, + <&cru SCLK_RGA>, + <&cru SCLK_HDMI_CEC>, + <&cru SCLK_HDMI_HDCP>; + pm_qos = <&qos_iep>, + <&qos_isp_r0>, + <&qos_isp_r1>, + <&qos_isp_w0>, + <&qos_isp_w1>, + <&qos_vip>, + <&qos_vop>, + <&qos_rga_r>, + <&qos_rga_w>; + #power-domain-cells = <0>; + }; + + /* + * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC + * (video endecoder & decoder) clocks that on the + * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC). + */ + power-domain@RK3368_PD_VIDEO { + reg = ; + clocks = <&cru ACLK_VIDEO>, + <&cru HCLK_VIDEO>, + <&cru SCLK_HEVC_CABAC>, + <&cru SCLK_HEVC_CORE>; + pm_qos = <&qos_hevc_r>, + <&qos_vpu_r>, + <&qos_vpu_w>; + #power-domain-cells = <0>; + }; + + /* + * Note: ACLK_GPU is the GPU clock, + * and on the ACLK_GPU_NIU (NOC). + */ + power-domain@RK3368_PD_GPU_1 { + reg = ; + clocks = <&cru ACLK_GPU_CFG>, + <&cru ACLK_GPU_MEM>, + <&cru SCLK_GPU_CORE>; + pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; + }; + }; + }; + pmugrf: syscon@ff738000 { compatible = "rockchip,rk3368-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xff738000 0x0 0x1000>; @@ -709,9 +819,9 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff900800 0x0 0x100>; interrupts = ; - interrupt-names = "iep_mmu"; clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; clock-names = "aclk", "iface"; + power-domains = <&power RK3368_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; @@ -721,10 +831,10 @@ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = ; - interrupt-names = "isp_mmu"; clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3368_PD_VIO>; rockchip,disable-mmu-reset; status = "disabled"; }; @@ -733,9 +843,9 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff930300 0x0 0x100>; interrupts = ; - interrupt-names = "vop_mmu"; clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; clock-names = "aclk", "iface"; + power-domains = <&power RK3368_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; @@ -745,7 +855,6 @@ reg = <0x0 0xff9a0440 0x0 0x40>, <0x0 0xff9a0480 0x0 0x40>; interrupts = ; - interrupt-names = "hevc_mmu"; clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -757,13 +866,77 @@ reg = <0x0 0xff9a0800 0x0 0x100>; interrupts = , ; - interrupt-names = "vepu_mmu", "vdpu_mmu"; clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>; clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; + qos_iep: qos@ffad0000 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0000 0x0 0x20>; + }; + + qos_isp_r0: qos@ffad0080 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0080 0x0 0x20>; + }; + + qos_isp_r1: qos@ffad0100 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0100 0x0 0x20>; + }; + + qos_isp_w0: qos@ffad0180 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0180 0x0 0x20>; + }; + + qos_isp_w1: qos@ffad0200 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0200 0x0 0x20>; + }; + + qos_vip: qos@ffad0280 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0280 0x0 0x20>; + }; + + qos_vop: qos@ffad0300 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0300 0x0 0x20>; + }; + + qos_rga_r: qos@ffad0380 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0380 0x0 0x20>; + }; + + qos_rga_w: qos@ffad0400 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0400 0x0 0x20>; + }; + + qos_hevc_r: qos@ffae0000 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffae0000 0x0 0x20>; + }; + + qos_vpu_r: qos@ffae0100 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffae0100 0x0 0x20>; + }; + + qos_vpu_w: qos@ffae0180 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffae0180 0x0 0x20>; + }; + + qos_gpu: qos@ffaf0000 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffaf0000 0x0 0x20>; + }; + efuse256: efuse@ffb00000 { compatible = "rockchip,rk3368-efuse"; reg = <0x0 0xffb00000 0x0 0x20>; @@ -802,7 +975,7 @@ #size-cells = <0x2>; ranges; - gpio0: gpio0@ff750000 { + gpio0: gpio@ff750000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff750000 0x0 0x100>; clocks = <&cru PCLK_GPIO0>; @@ -815,7 +988,7 @@ #interrupt-cells = <0x2>; }; - gpio1: gpio1@ff780000 { + gpio1: gpio@ff780000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff780000 0x0 0x100>; clocks = <&cru PCLK_GPIO1>; @@ -828,7 +1001,7 @@ #interrupt-cells = <0x2>; }; - gpio2: gpio2@ff790000 { + gpio2: gpio@ff790000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff790000 0x0 0x100>; clocks = <&cru PCLK_GPIO2>; @@ -841,7 +1014,7 @@ #interrupt-cells = <0x2>; }; - gpio3: gpio3@ff7a0000 { + gpio3: gpio@ff7a0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7a0000 0x0 0x100>; clocks = <&cru PCLK_GPIO3>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index e6c1c94..31ebb4e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -16,6 +16,7 @@ "google,bob-rev7", "google,bob-rev6", "google,bob-rev5", "google,bob-rev4", "google,bob", "google,gru", "rockchip,rk3399"; + chassis-type = "convertible"; edp_panel: edp-panel { compatible = "boe,nv101wxmn51"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 1384dab..9b2c679 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -251,6 +251,182 @@ }; }; +&gpio0 { + gpio-line-names = /* GPIO0 A 0-7 */ + "AP_RTC_CLK_IN", + "EC_AP_INT_L", + "PP1800_AUDIO_EN", + "BT_HOST_WAKE_L", + "WLAN_MODULE_PD_L", + "H1_INT_OD_L", + "CENTERLOGIC_DVS_PWM", + "", + + /* GPIO0 B 0-4 */ + "WIFI_HOST_WAKE_L", + "PMUIO2_33_18_L", + "PP1500_EN", + "AP_EC_WARM_RESET_REQ", + "PP3000_EN"; +}; + +&gpio1 { + gpio-line-names = /* GPIO1 A 0-7 */ + "", + "", + "SPK_PA_EN", + "", + "TRACKPAD_INT_L", + "AP_EC_S3_S0_L", + "AP_EC_OVERTEMP", + "AP_SPI_FLASH_MISO", + + /* GPIO1 B 0-7 */ + "AP_SPI_FLASH_MOSI_R", + "AP_SPI_FLASH_CLK_R", + "AP_SPI_FLASH_CS_L_R", + "WLAN_MODULE_RESET_L", + "WIFI_DISABLE_L", + "MIC_INT", + "", + "AP_I2C_DVS_SDA", + + /* GPIO1 C 0-7 */ + "AP_I2C_DVS_SCL", + "AP_BL_EN", + /* + * AP_FLASH_WP is crossystem ABI. Schematics call it + * AP_FW_WP or CPU1_FW_WP, depending on the variant. + */ + "AP_FLASH_WP", + "LITCPU_DVS_PWM", + "AP_I2C_AUDIO_SDA", + "AP_I2C_AUDIO_SCL", + "", + "HEADSET_INT_L"; +}; + +&gpio2 { + gpio-line-names = /* GPIO2 A 0-7 */ + "", + "", + "SD_IO_PWR_EN", + "", + "", + "", + "", + "", + + /* GPIO2 B 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO2 C 0-7 */ + "", + "", + "", + "", + "AP_SPI_EC_MISO", + "AP_SPI_EC_MOSI", + "AP_SPI_EC_CLK", + "AP_SPI_EC_CS_L", + + /* GPIO2 D 0-4 */ + "BT_DEV_WAKE_L", + "", + "WIFI_PCIE_CLKREQ_L", + "WIFI_PERST_L", + "SD_PWR_3000_1800_L"; +}; + +&gpio3 { + gpio-line-names = /* GPIO3 A 0-7 */ + "", + "", + "", + "", + "AP_SPI_TPM_MISO", + "AP_SPI_TPM_MOSI_R", + "AP_SPI_TPM_CLK_R", + "AP_SPI_TPM_CS_L_R", + + /* GPIO3 B 0-7 */ + "EC_IN_RW", + "", + "AP_I2C_TP_SDA", + "AP_I2C_TP_SCL", + "AP_I2C_TP_PU_EN", + "TOUCH_INT_L", + "", + "", + + /* GPIO3 C 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 D 0-7 */ + "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI_0", + "I2S0_SDI_1", + "", + "I2S0_SDO_1", + "I2S0_SDO_0"; +}; + +&gpio4 { + gpio-line-names = /* GPIO4 A 0-7 */ + "I2S_MCLK", + "AP_I2C_MIC_SDA", + "AP_I2C_MIC_SCL", + "", + "", + "", + "", + "", + + /* GPIO4 B 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO4 C 0-7 */ + "AP_I2C_TS_SDA", + "AP_I2C_TS_SCL", + "GPU_DVS_PWM", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "", + "BIGCPU_DVS_PWM", + "EDP_HPD_3V0", + + /* GPIO4 D 0-5 */ + "SD_CARD_DET_L", + "USB_DP_HPD", + "TOUCH_RESET_L", + "PP3300_DISP_EN", + "", + "SD_SLOT_PWR_EN"; +}; + ap_i2c_mic: &i2c1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 2bbef9f..6863689 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -24,6 +24,7 @@ "google,kevin-rev9", "google,kevin-rev8", "google,kevin-rev7", "google,kevin-rev6", "google,kevin", "google,gru", "rockchip,rk3399"; + chassis-type = "convertible"; /* Power tree */ diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts new file mode 100644 index 0000000..853e884 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Scarlet Rev5+ (SKU-0) board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "rk3399-gru-scarlet.dtsi" + +/ { + model = "Google Scarlet"; + compatible = "google,scarlet-rev15-sku0", "google,scarlet-rev15", + "google,scarlet-rev14-sku0", "google,scarlet-rev14", + "google,scarlet-rev13-sku0", "google,scarlet-rev13", + "google,scarlet-rev12-sku0", "google,scarlet-rev12", + "google,scarlet-rev11-sku0", "google,scarlet-rev11", + "google,scarlet-rev10-sku0", "google,scarlet-rev10", + "google,scarlet-rev9-sku0", "google,scarlet-rev9", + "google,scarlet-rev8-sku0", "google,scarlet-rev8", + "google,scarlet-rev7-sku0", "google,scarlet-rev7", + "google,scarlet-rev6-sku0", "google,scarlet-rev6", + "google,scarlet-rev5-sku0", "google,scarlet-rev5", + "google,scarlet", "google,gru", "rockchip,rk3399"; +}; + +&mipi_panel { + compatible = "innolux,p097pfg"; + avdd-supply = <&ppvarp_lcd>; + avee-supply = <&ppvarn_lcd>; +}; + +&pci_rootport { + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0x00010000 0x0 0x00000000 0x0 0x00000000>, + <0x03010010 0x0 0x00000000 0x0 0x00200000>; + qcom,ath10k-calibration-variant = "GO_DUMO"; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 5d7a9d9..a9817b3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -8,6 +8,8 @@ #include "rk3399-gru.dtsi" /{ + chassis-type = "tablet"; + /* Power tree */ /* ppvar_sys children, sorted by name */ @@ -389,6 +391,186 @@ camera: &i2c7 { <400000000>; }; +&gpio0 { + gpio-line-names = /* GPIO0 A 0-7 */ + "CLK_32K_AP", + "EC_IN_RW_OD", + "SPK_PA_EN", + "WLAN_PERST_1V8_L", + "WLAN_PD_1V8_L", + "WLAN_RF_KILL_1V8_L", + "BIGCPU_DVS_PWM", + "SD_CD_L_JTAG_EN", + + /* GPIO0 B 0-5 */ + "BT_EN_BT_RF_KILL_1V8_L", + "PMUIO2_33_18_L_PP3300_S0_EN", + "TOUCH_RESET_L", + "AP_EC_WARM_RESET_REQ", + "PEN_RESET_L", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics call + * it AP_FLASH_WP_R_ODL. + */ + "AP_FLASH_WP_L"; +}; + +&gpio1 { + gpio-line-names = /* GPIO1 A 0-7 */ + "PEN_INT_ODL", + "PEN_EJECT_ODL", + "BT_HOST_WAKE_1V8_L", + "WLAN_HOST_WAKE_1V8_L", + "TOUCH_INT_ODL", + "AP_EC_S3_S0_L", + "AP_EC_OVERTEMP", + "AP_SPI_FLASH_MISO", + + /* GPIO1 B 0-7 */ + "AP_SPI_FLASH_MOSI_R", + "AP_SPI_FLASH_CLK_R", + "AP_SPI_FLASH_CS_L_R", + "SD_CARD_DET_ODL", + "", + "AP_EXPANSION_IO1", + "AP_EXPANSION_IO2", + "AP_I2C_DISP_SDA", + + /* GPIO1 C 0-7 */ + "AP_I2C_DISP_SCL", + "H1_INT_ODL", + "EC_AP_INT_ODL", + "LITCPU_DVS_PWM", + "AP_I2C_AUDIO_SDA", + "AP_I2C_AUDIO_SCL", + "AP_EXPANSION_IO3", + "HEADSET_INT_ODL", + + /* GPIO1 D0 */ + "AP_EXPANSION_IO4"; +}; + +&gpio2 { + gpio-line-names = /* GPIO2 A 0-7 */ + "AP_I2C_PEN_SDA", + "AP_I2C_PEN_SCL", + "SD_IO_PWR_EN", + "UCAM_RST_L", + "PP1250_CAM_EN", + "WCAM_RST_L", + "AP_EXPANSION_IO5", + "AP_I2C_CAM_SDA", + + /* GPIO2 B 0-7 */ + "AP_I2C_CAM_SCL", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + + /* GPIO2 C 0-7 */ + "UART_EXPANSION_TX_AP_RX", + "UART_AP_TX_EXPANSION_RX", + "UART_EXPANSION_RTS_AP_CTS", + "UART_AP_RTS_EXPANSION_CTS", + "AP_SPI_EC_MISO", + "AP_SPI_EC_MOSI", + "AP_SPI_EC_CLK", + "AP_SPI_EC_CS_L", + + /* GPIO2 D 0-4 */ + "PP2800_CAM_EN", + "CLK_24M_CAM", + "WLAN_PCIE_CLKREQ_1V8_L", + "", + "SD_PWR_3000_1800_L"; +}; + +&gpio3 { + gpio-line-names = /* GPIO3 A 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 B 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 C 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 D 0-7 */ + "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI_0", + "STRAP_LCDBIAS_L", + "STRAP_FEATURE_1", + "STRAP_FEATURE_2", + "I2S0_SDO_0"; +}; + +&gpio4 { + gpio-line-names = /* GPIO4 A 0-7 */ + "I2S_MCLK", + "AP_I2C_EXPANSION_SDA", + "AP_I2C_EXPANSION_SCL", + "DMIC_EN", + "", + "", + "", + "", + + /* GPIO4 B 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO4 C 0-7 */ + "AP_I2C_TS_SDA", + "AP_I2C_TS_SCL", + "GPU_DVS_PWM", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "BL_EN", + "BL_PWM", + "", + + /* GPIO4 D 0-5 */ + "", + "DISPLAY_RST_L", + "", + "PPVARP_LCD_EN", + "PPVARN_LCD_EN", + "SD_SLOT_PWR_EN"; +}; + &i2c_tunnel { google,remote-bus = <0>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index c1bcc8c..45a5ae5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -461,7 +461,7 @@ ap_i2c_audio: &i2c8 { vpcie0v9-supply = <&pp900_pcie>; pci_rootport: pcie@0,0 { - reg = <0x83000000 0x0 0x00000000 0x0 0x00000000>; + reg = <0x0000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; ranges; @@ -543,7 +543,7 @@ ap_i2c_audio: &i2c8 { pinctrl-names = "default", "sleep"; pinctrl-1 = <&spi1_sleep>; - spiflash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts index 738cfd2..63c7681 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -21,6 +21,9 @@ aliases { mmc0 = &sdmmc; mmc1 = &sdhci; + spi1 = &spi1; + spi2 = &spi2; + spi5 = &spi5; }; avdd_0v9_s0: avdd-0v9-s0 { @@ -43,6 +46,10 @@ vin-supply = <&vcc3v3_sys_s3>; }; + chosen { + stdout-path = "serial2:1500000n8"; + }; + clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -469,11 +476,40 @@ status = "okay"; }; +&spi1 { + status = "okay"; + + spiflash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <25000000>; + status = "okay"; + m25p,fast-read; + }; +}; + +/* UEXT connector */ +&spi2 { + status = "okay"; +}; + +&spi5 { + status = "okay"; +}; + &tcphy1 { /* phy for &usbdrd_dwc3_1 */ status = "okay"; }; +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + &u2phy1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi index 69cc9b0..2180e0f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi @@ -4,7 +4,7 @@ */ / { - cluster0_opp: opp-table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -39,7 +39,7 @@ }; }; - cluster1_opp: opp-table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; @@ -82,7 +82,7 @@ }; }; - gpu_opp_table: opp-table2 { + gpu_opp_table: opp-table-2 { compatible = "operating-points-v2"; opp00 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index da41cd8..fee5e71 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi @@ -4,7 +4,7 @@ */ / { - cluster0_opp: opp-table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -35,7 +35,7 @@ }; }; - cluster1_opp: opp-table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; @@ -74,7 +74,7 @@ }; }; - gpu_opp_table: opp-table2 { + gpu_opp_table: opp-table-2 { compatible = "operating-points-v2"; opp00 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index 2b5f001..c2f021a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -17,6 +17,7 @@ / { model = "Pine64 Pinebook Pro"; compatible = "pine64,pinebook-pro", "rockchip,rk3399"; + chassis-type = "laptop"; aliases { mmc0 = &sdio0; @@ -385,10 +386,6 @@ }; }; -&cdn_dp { - status = "okay"; -}; - &cpu_b0 { cpu-supply = <&vdd_cpu_b>; }; @@ -711,7 +708,7 @@ connector { compatible = "usb-c-connector"; - data-role = "host"; + data-role = "dual"; label = "USB-C"; op-sink-microwatt = <1000000>; power-role = "dual"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts new file mode 100644 index 0000000..5a2661a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + */ + +/dts-v1/; +#include "rk3399-roc-pc.dtsi" + +/* + * Notice: + * 1. rk3399-roc-pc-plus is powered by dc_12v directly. + * 2. rk3399-roc-pc-plus has only vcc_bus_typec0 in schematic, which is coresponding + * to vcc_vbus_typec1 in rk3399-roc-pc. + * For simplicity, reserve the node name of vcc_vbus_typec1. + * 3. vcc5v0_host is actually 2 regulators (host0, 1) controlled by the same gpio. + */ + +/delete-node/ &fusb1; +/delete-node/ &hub_rst; +/delete-node/ &mp8859; +/delete-node/ &vcc_sys_en; +/delete-node/ &vcc_vbus_typec0; +/delete-node/ &yellow_led; + +/ { + model = "Firefly ROC-RK3399-PC-PLUS Board"; + compatible = "firefly,roc-rk3399-pc-plus", "rockchip,rk3399"; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + es8388-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det_pin>; + simple-audio-card,name = "rockchip,es8388-codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones"; + simple-audio-card,routing = + "LINPUT1", "Mic Jack", + "Headphone Amp INL", "LOUT2", + "Headphone Amp INR", "ROUT2", + "Headphones", "Headphone Amp OUTL", + "Headphones", "Headphone Amp OUTR"; + simple-audio-card,hp-det-gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>; + simple-audio-card,aux-devs = <&headphones_amp>; + simple-audio-card,pin-switches = "Headphones"; + + simple-audio-card,codec { + sound-dai = <&es8388>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + }; + + gpio-fan { + #cooling-cells = <2>; + compatible = "gpio-fan"; + gpio-fan,speed-map = <0 0 3000 1>; + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; + }; + + /delete-node/ gpio-keys; + + /* not amplifier, used as switcher only */ + headphones_amp: headphones-amp { + compatible = "simple-audio-amplifier"; + pinctrl-names = "default"; + pinctrl-0 = <&ear_ctl_pin>; + enable-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Headphone Amp"; + VCC-supply = <&vcca3v0_codec>; + }; + + ir-receiver { + linux,rc-map-name = "rc-khadas"; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; + }; +}; + +&fusb0 { + vbus-supply = <&vcc_vbus_typec1>; +}; + +&i2c0 { + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = ; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + +&i2c1 { + es8388: es8388@11 { + compatible = "everest,es8388"; + reg = <0x11>; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S_8CH_OUT>; + #sound-dai-cells = <0>; + }; +}; + +/* <4 RK_PA0 1 &pcfg_pull_none> is used as i2s_8ch_mclk_pin */ +&i2s0_8ch_bus { + rockchip,pins = + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD4 1 &pcfg_pull_none>, + <3 RK_PD5 1 &pcfg_pull_none>, + <3 RK_PD6 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; +}; + +&i2s1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&pinctrl { + es8388 { + ear_ctl_pin: ear-ctl-pin { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>; + }; + + hp_det_pin: hp-det-pin { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + i2s1 { + i2s_8ch_mclk_pin: i2s-8ch-mclk-pin { + rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; + }; + }; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&vcc_sys { + /* vcc_sys is fixed, not controlled by any gpio */ + /delete-property/ gpio; + /delete-property/ pinctrl-names; + /delete-property/ pinctrl-0; +}; + +&vcc5v0_host { + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index b28888e..98136c8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -36,6 +36,29 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + sound { + compatible = "audio-graph-card"; + label = "Analog"; + dais = <&i2s0_p0>; + }; + + sound-dit { + compatible = "audio-graph-card"; + label = "SPDIF"; + dais = <&spdif_p0>; + }; + + spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port { + dit_p0_0: endpoint { + remote-endpoint = <&spdif_p0_0>; + }; + }; + }; + vcc12v_dcin: dc-12v { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -422,6 +445,20 @@ i2c-scl-rising-time-ns = <300>; i2c-scl-falling-time-ns = <15>; status = "okay"; + + es8316: codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_p0_0>; + }; + }; + }; }; &i2c3 { @@ -441,6 +478,14 @@ rockchip,capture-channels = <2>; rockchip,playback-channels = <2>; status = "okay"; + + i2s0_p0: port { + i2s0_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; }; &i2s1 { @@ -603,6 +648,15 @@ status = "okay"; }; +&spdif { + + spdif_p0: port { + spdif_p0_0: endpoint { + remote-endpoint = <&dit_p0_0>; + }; + }; +}; + &tcphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts new file mode 100644 index 0000000..281a04b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar + * Copyright (c) 2019 Pragnesh Patel + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" +#include "rk3399-op1-opp.dtsi" + +/ { + model = "Radxa ROCK Pi 4A+"; + compatible = "radxa,rockpi4a-plus", "radxa,rockpi4", "rockchip,rk3399"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts new file mode 100644 index 0000000..dfad13d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar + * Copyright (c) 2019 Pragnesh Patel + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" +#include "rk3399-op1-opp.dtsi" + +/ { + model = "Radxa ROCK Pi 4B+"; + compatible = "radxa,rockpi4b-plus", "radxa,rockpi4", "rockchip,rk3399"; + + aliases { + mmc2 = &sdio0; + }; +}; + +&sdio0 { + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = ; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&uart0 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 6bff8db..83db4ca 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -69,6 +69,7 @@ fan: pwm-fan { compatible = "pwm-fan"; + cooling-levels = <0 100 150 200 255>; #cooling-cells = <2>; fan-supply = <&vcc12v_dcin>; pwms = <&pwm1 0 50000 0>; @@ -245,6 +246,34 @@ cpu-supply = <&vdd_cpu_b>; }; +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map3 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + &emmc_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 3871c7f..d3cdf6f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -124,6 +124,12 @@ #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + + thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <500>; + }; }; cpu_b1: cpu@101 { @@ -136,6 +142,12 @@ #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + + thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <500>; + }; }; idle-states { @@ -361,6 +373,54 @@ status = "disabled"; }; + debug@fe430000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe430000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l0>; + }; + + debug@fe432000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe432000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l1>; + }; + + debug@fe434000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe434000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l2>; + }; + + debug@fe436000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe436000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l3>; + }; + + debug@fe610000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe610000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_B>; + clock-names = "apb_pclk"; + cpu = <&cpu_b0>; + }; + + debug@fe710000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe710000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_B>; + clock-names = "apb_pclk"; + cpu = <&cpu_b1>; + }; + usbdrd3_0: usb@fe800000 { compatible = "rockchip,rk3399-dwc3"; #address-cells = <2>; @@ -1251,7 +1311,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff650800 0x0 0x40>; interrupts = ; - interrupt-names = "vpu_mmu"; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -1273,7 +1332,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; interrupts = ; - interrupt-names = "vdec_mmu"; clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; clock-names = "aclk", "iface"; power-domains = <&power RK3399_PD_VDU>; @@ -1284,7 +1342,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff670800 0x0 0x40>; interrupts = ; - interrupt-names = "iep_mmu"; clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -1666,7 +1723,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff8f3f00 0x0 0x100>; interrupts = ; - interrupt-names = "vopl_mmu"; clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; clock-names = "aclk", "iface"; power-domains = <&power RK3399_PD_VOPL>; @@ -1723,7 +1779,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff903f00 0x0 0x100>; interrupts = ; - interrupt-names = "vopb_mmu"; clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk", "iface"; power-domains = <&power RK3399_PD_VOPB>; @@ -1761,7 +1816,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = ; - interrupt-names = "isp0_mmu"; clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -1769,11 +1823,36 @@ rockchip,disable-mmu-reset; }; + isp1: isp1@ff920000 { + compatible = "rockchip,rk3399-cif-isp"; + reg = <0x0 0xff920000 0x0 0x4000>; + interrupts = ; + clocks = <&cru SCLK_ISP1>, + <&cru ACLK_ISP1_WRAPPER>, + <&cru HCLK_ISP1_WRAPPER>; + clock-names = "isp", "aclk", "hclk"; + iommus = <&isp1_mmu>; + phys = <&mipi_dsi1>; + phy-names = "dphy"; + power-domains = <&power RK3399_PD_ISP1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + isp1_mmu: iommu@ff924000 { compatible = "rockchip,iommu"; reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; interrupts = ; - interrupt-names = "isp1_mmu"; clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -1878,6 +1957,7 @@ rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <0>; + #phy-cells = <0>; status = "disabled"; ports { @@ -1958,7 +2038,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff720000 { + gpio0: gpio@ff720000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff720000 0x0 0x100>; clocks = <&pmucru PCLK_GPIO0_PMU>; @@ -1971,7 +2051,7 @@ #interrupt-cells = <0x2>; }; - gpio1: gpio1@ff730000 { + gpio1: gpio@ff730000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff730000 0x0 0x100>; clocks = <&pmucru PCLK_GPIO1_PMU>; @@ -1984,7 +2064,7 @@ #interrupt-cells = <0x2>; }; - gpio2: gpio2@ff780000 { + gpio2: gpio@ff780000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff780000 0x0 0x100>; clocks = <&cru PCLK_GPIO2>; @@ -1997,7 +2077,7 @@ #interrupt-cells = <0x2>; }; - gpio3: gpio3@ff788000 { + gpio3: gpio@ff788000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff788000 0x0 0x100>; clocks = <&cru PCLK_GPIO3>; @@ -2010,7 +2090,7 @@ #interrupt-cells = <0x2>; }; - gpio4: gpio4@ff790000 { + gpio4: gpio@ff790000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff790000 0x0 0x100>; clocks = <&cru PCLK_GPIO4>; @@ -2114,6 +2194,18 @@ }; }; + cif { + cif_clkin: cif-clkin { + rockchip,pins = + <2 RK_PB2 3 &pcfg_pull_none>; + }; + + cif_clkouta: cif-clkouta { + rockchip,pins = + <2 RK_PB3 3 &pcfg_pull_none>; + }; + }; + edp { edp_hpd: edp-hpd { rockchip,pins = diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts new file mode 100644 index 0000000..4d4b2a3 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include "rk3566.dtsi" + +/ { + model = "Pine64 RK3566 Quartz64-A Board"; + compatible = "pine64,quartz64-a", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + fan: gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 4500 1>; + #cooling-cells = <2>; + }; + + leds { + compatible = "gpio-leds"; + + led-work { + label = "work-led"; + default-state = "off"; + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_enable_h>; + retain-state-suspended; + }; + + led-diy { + label = "diy-led"; + default-state = "on"; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&diy_led_enable_h>; + retain-state-suspended; + }; + }; + + rk817-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK817"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + }; + + spdif_dit: spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_sound: spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_dit>; + }; + }; + + vcc12v_dcin: vcc12v_dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* vbus feeds the rk817 usb input. + * With no battery attached, also feeds vcc_bat+ + * via ON/OFF_BAT jumper + */ + vbus: vbus { + compatible = "regulator-fixed"; + regulator-name = "vbus"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0_usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_sd: vcc3v3_sd { + compatible = "regulator-fixed"; + enable-active-low; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_sd_h>; + regulator-boot-on; + regulator-name = "vcc3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + + /* sourced from vbus and vcc_bat+ via rk817 sw5 */ + vcc_sys: vcc_sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4400000>; + regulator-max-microvolt = <4400000>; + vin-supply = <&vbus>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_thermal { + trips { + cpu_hot: cpu_hot { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&cpu_hot>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + clock_in_out = "input"; + phy-supply = <&vcc_3v3>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_clkinout + &gmac1m0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc2v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + dcdc_boost: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + work_led_enable_h: work-led-enable-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_enable_h: diy-led-enable-h { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vcc_sd { + vcc_sd_h: vcc-sd-h { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; + status = "okay"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk817 1>; + clock-names = "lpo"; + device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc_sys>; + vddio-supply = <&vcca1v8_pmu>; + }; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi new file mode 100644 index 0000000..3839eef --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include "rk356x.dtsi" + +/ { + compatible = "rockchip,rk3566"; +}; + +&power { + power-domain@RK3568_PD_PIPE { + reg = ; + clocks = <&cru PCLK_PIPE>; + pm_qos = <&qos_pcie2x1>, + <&qos_sata1>, + <&qos_sata2>, + <&qos_usb3_0>, + <&qos_usb3_1>; + #power-domain-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts index 6978655..184e2aa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -13,6 +13,13 @@ model = "Rockchip RK3568 EVB1 DDR4 V10 Board"; compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568"; + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + chosen: chosen { stdout-path = "serial2:1500000n8"; }; @@ -67,10 +74,316 @@ }; }; +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + status = "okay"; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + &sdhci { bus-width = <8>; max-frequency = <200000000>; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi index a588ca9..8f90c66 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi @@ -3108,4 +3108,13 @@ <4 RK_PA0 3 &pcfg_pull_none_drv_level_2>; }; }; + + tsadc { + /omit-if-no-ref/ + tsadc_pin: tsadc-pin { + rockchip,pins = + /* tsadc_pin */ + <0 RK_PA1 0 &pcfg_pull_none>; + }; + }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi index d225e6a..2fd313a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -3,591 +3,95 @@ * Copyright (c) 2021 Rockchip Electronics Co., Ltd. */ -#include -#include -#include -#include -#include -#include -#include +#include "rk356x.dtsi" / { compatible = "rockchip,rk3568"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - gpio4 = &gpio4; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - serial6 = &uart6; - serial7 = &uart7; - serial8 = &uart8; - serial9 = &uart9; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x0>; - clocks = <&scmi_clk 0>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu1: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x100>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu2: cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x200>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu3: cpu@300 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x300>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: cpu0-opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-408000000 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <900000 900000 1150000>; - clock-latency-ns = <40000>; - }; - - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <900000 900000 1150000>; - }; - - opp-816000000 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <900000 900000 1150000>; - opp-suspend; - }; - - opp-1104000000 { - opp-hz = /bits/ 64 <1104000000>; - opp-microvolt = <900000 900000 1150000>; - }; - - opp-1416000000 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <900000 900000 1150000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <975000 975000 1150000>; - }; + qos_pcie3x1: qos@fe190080 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190080 0x0 0x20>; + }; + + qos_pcie3x2: qos@fe190100 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190100 0x0 0x20>; + }; + + qos_sata0: qos@fe190200 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190200 0x0 0x20>; + }; + + gmac0: ethernet@fe2a0000 { + compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; + reg = <0x0 0xfe2a0000 0x0 0x10000>; + interrupts = , + ; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>, + <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>, + <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>, + <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>, + <&cru PCLK_XPCS>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_refout", + "aclk_mac", "pclk_mac", + "clk_mac_speed", "ptp_ref", + "pclk_xpcs"; + resets = <&cru SRST_A_GMAC0>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,tso; + status = "disabled"; - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1050000 1050000 1150000>; + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; }; - opp-1992000000 { - opp-hz = /bits/ 64 <1992000000>; - opp-microvolt = <1150000 1150000 1150000>; + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <8>; + snps,wr_osr_lmt = <4>; }; - }; - firmware { - scmi: scmi { - compatible = "arm,scmi-smc"; - arm,smc-id = <0x82000010>; - shmem = <&scmi_shmem>; - #address-cells = <1>; - #size-cells = <0>; - - scmi_clk: protocol@14 { - reg = <0x14>; - #clock-cells = <1>; - }; + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; }; - }; - - pmu { - compatible = "arm,cortex-a55-pmu"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - arm,no-tick-in-suspend; - }; - - xin24m: xin24m { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xin24m"; - #clock-cells = <0>; - }; - - xin32k: xin32k { - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - pinctrl-0 = <&clk32k_out0>; - pinctrl-names = "default"; - #clock-cells = <0>; - }; - - sram@10f000 { - compatible = "mmio-sram"; - reg = <0x0 0x0010f000 0x0 0x100>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x0010f000 0x100>; - - scmi_shmem: sram@0 { - compatible = "arm,scmi-shmem"; - reg = <0x0 0x100>; + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; }; }; +}; - gic: interrupt-controller@fd400000 { - compatible = "arm,gic-v3"; - reg = <0x0 0xfd400000 0 0x10000>, /* GICD */ - <0x0 0xfd460000 0 0x80000>; /* GICR */ - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - mbi-alias = <0x0 0xfd100000>; - mbi-ranges = <296 24>; - msi-controller; - }; - - pmugrf: syscon@fdc20000 { - compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"; - reg = <0x0 0xfdc20000 0x0 0x10000>; - }; - - grf: syscon@fdc60000 { - compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfdc60000 0x0 0x10000>; - }; - - pmucru: clock-controller@fdd00000 { - compatible = "rockchip,rk3568-pmucru"; - reg = <0x0 0xfdd00000 0x0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - cru: clock-controller@fdd20000 { - compatible = "rockchip,rk3568-cru"; - reg = <0x0 0xfdd20000 0x0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - i2c0: i2c@fdd40000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfdd40000 0x0 0x1000>; - interrupts = ; - clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart0: serial@fdd50000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfdd50000 0x0 0x100>; - interrupts = ; - clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 0>, <&dmac0 1>; - pinctrl-0 = <&uart0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - sdmmc2: mmc@fe000000 { - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe000000 0x0 0x4000>; - interrupts = ; - clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>, - <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <150000000>; - resets = <&cru SRST_SDMMC2>; - reset-names = "reset"; - status = "disabled"; - }; - - sdmmc0: mmc@fe2b0000 { - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe2b0000 0x0 0x4000>; - interrupts = ; - clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>, - <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <150000000>; - resets = <&cru SRST_SDMMC0>; - reset-names = "reset"; - status = "disabled"; - }; - - sdmmc1: mmc@fe2c0000 { - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe2c0000 0x0 0x4000>; - interrupts = ; - clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>, - <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <150000000>; - resets = <&cru SRST_SDMMC1>; - reset-names = "reset"; - status = "disabled"; - }; - - sdhci: mmc@fe310000 { - compatible = "rockchip,rk3568-dwcmshc"; - reg = <0x0 0xfe310000 0x0 0x10000>; - interrupts = ; - assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>; - assigned-clock-rates = <200000000>, <24000000>; - clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, - <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, - <&cru TCLK_EMMC>; - clock-names = "core", "bus", "axi", "block", "timer"; - status = "disabled"; - }; - - dmac0: dmac@fe530000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xfe530000 0x0 0x4000>; - interrupts = , - ; - arm,pl330-periph-burst; - clocks = <&cru ACLK_BUS>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - dmac1: dmac@fe550000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xfe550000 0x0 0x4000>; - interrupts = , - ; - arm,pl330-periph-burst; - clocks = <&cru ACLK_BUS>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - i2c1: i2c@fe5a0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5a0000 0x0 0x1000>; - interrupts = ; - clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c1_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@fe5b0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5b0000 0x0 0x1000>; - interrupts = ; - clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c2m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@fe5c0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5c0000 0x0 0x1000>; - interrupts = ; - clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c3m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c4: i2c@fe5d0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5d0000 0x0 0x1000>; - interrupts = ; - clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c4m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c5: i2c@fe5e0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5e0000 0x0 0x1000>; - interrupts = ; - clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c5m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart1: serial@fe650000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe650000 0x0 0x100>; - interrupts = ; - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 2>, <&dmac0 3>; - pinctrl-0 = <&uart1m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart2: serial@fe660000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe660000 0x0 0x100>; - interrupts = ; - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 4>, <&dmac0 5>; - pinctrl-0 = <&uart2m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart3: serial@fe670000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe670000 0x0 0x100>; - interrupts = ; - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 6>, <&dmac0 7>; - pinctrl-0 = <&uart3m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart4: serial@fe680000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe680000 0x0 0x100>; - interrupts = ; - clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 8>, <&dmac0 9>; - pinctrl-0 = <&uart4m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart5: serial@fe690000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe690000 0x0 0x100>; - interrupts = ; - clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 10>, <&dmac0 11>; - pinctrl-0 = <&uart5m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart6: serial@fe6a0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6a0000 0x0 0x100>; - interrupts = ; - clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 12>, <&dmac0 13>; - pinctrl-0 = <&uart6m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart7: serial@fe6b0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6b0000 0x0 0x100>; - interrupts = ; - clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 14>, <&dmac0 15>; - pinctrl-0 = <&uart7m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart8: serial@fe6c0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6c0000 0x0 0x100>; - interrupts = ; - clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 16>, <&dmac0 17>; - pinctrl-0 = <&uart8m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart9: serial@fe6d0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6d0000 0x0 0x100>; - interrupts = ; - clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 18>, <&dmac0 19>; - pinctrl-0 = <&uart9m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; +&cpu0_opp_table { + opp-1992000000 { + opp-hz = /bits/ 64 <1992000000>; + opp-microvolt = <1150000 1150000 1150000>; }; +}; - pinctrl: pinctrl { - compatible = "rockchip,rk3568-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmugrf>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio0: gpio@fdd60000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfdd60000 0x0 0x100>; - interrupts = ; - clocks = <&pmucru PCLK_GPIO0>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio@fe740000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe740000 0x0 0x100>; - interrupts = ; - clocks = <&cru PCLK_GPIO1>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@fe750000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe750000 0x0 0x100>; - interrupts = ; - clocks = <&cru PCLK_GPIO2>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@fe760000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe760000 0x0 0x100>; - interrupts = ; - clocks = <&cru PCLK_GPIO3>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@fe770000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe770000 0x0 0x100>; - interrupts = ; - clocks = <&cru PCLK_GPIO4>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; +&power { + power-domain@RK3568_PD_PIPE { + reg = ; + clocks = <&cru PCLK_PIPE>; + pm_qos = <&qos_pcie2x1>, + <&qos_pcie3x1>, + <&qos_pcie3x2>, + <&qos_sata0>, + <&qos_sata1>, + <&qos_sata2>, + <&qos_usb3_0>, + <&qos_usb3_1>; + #power-domain-cells = <0>; }; }; - -#include "rk3568-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi new file mode 100644 index 0000000..46d9552 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -0,0 +1,1145 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial7 = &uart7; + serial8 = &uart8; + serial9 = &uart9; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + clocks = <&scmi_clk 0>; + #cooling-cells = <2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + #cooling-cells = <2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + #cooling-cells = <2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + #cooling-cells = <2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <900000 900000 1150000>; + clock-latency-ns = <40000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000 900000 1150000>; + }; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <900000 900000 1150000>; + opp-suspend; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <900000 900000 1150000>; + }; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <900000 900000 1150000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <975000 975000 1150000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1050000 1050000 1150000>; + }; + }; + + firmware { + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x82000010>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + }; + + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + arm,no-tick-in-suspend; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + xin32k: xin32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + pinctrl-0 = <&clk32k_out0>; + pinctrl-names = "default"; + #clock-cells = <0>; + }; + + sram@10f000 { + compatible = "mmio-sram"; + reg = <0x0 0x0010f000 0x0 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x0010f000 0x100>; + + scmi_shmem: sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x100>; + }; + }; + + gic: interrupt-controller@fd400000 { + compatible = "arm,gic-v3"; + reg = <0x0 0xfd400000 0 0x10000>, /* GICD */ + <0x0 0xfd460000 0 0x80000>; /* GICR */ + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + mbi-alias = <0x0 0xfd410000>; + mbi-ranges = <296 24>; + msi-controller; + }; + + pmugrf: syscon@fdc20000 { + compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"; + reg = <0x0 0xfdc20000 0x0 0x10000>; + + pmu_io_domains: io-domains { + compatible = "rockchip,rk3568-pmu-io-voltage-domain"; + status = "disabled"; + }; + }; + + grf: syscon@fdc60000 { + compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfdc60000 0x0 0x10000>; + }; + + pmucru: clock-controller@fdd00000 { + compatible = "rockchip,rk3568-pmucru"; + reg = <0x0 0xfdd00000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@fdd20000 { + compatible = "rockchip,rk3568-cru"; + reg = <0x0 0xfdd20000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>; + assigned-clock-rates = <1200000000>, <200000000>; + rockchip,grf = <&grf>; + }; + + i2c0: i2c@fdd40000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfdd40000 0x0 0x1000>; + interrupts = ; + clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@fdd50000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfdd50000 0x0 0x100>; + interrupts = ; + clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + pinctrl-0 = <&uart0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + pwm0: pwm@fdd70000 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfdd70000 0x0 0x10>; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm0m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@fdd70010 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfdd70010 0x0 0x10>; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm1m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@fdd70020 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfdd70020 0x0 0x10>; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm2m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@fdd70030 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfdd70030 0x0 0x10>; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmu: power-management@fdd90000 { + compatible = "rockchip,rk3568-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xfdd90000 0x0 0x1000>; + + power: power-controller { + compatible = "rockchip,rk3568-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_GPU */ + power-domain@RK3568_PD_GPU { + reg = ; + clocks = <&cru ACLK_GPU_PRE>, + <&cru PCLK_GPU_PRE>; + pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; + }; + + /* These power domains are grouped by VD_LOGIC */ + power-domain@RK3568_PD_VI { + reg = ; + clocks = <&cru HCLK_VI>, + <&cru PCLK_VI>; + pm_qos = <&qos_isp>, + <&qos_vicap0>, + <&qos_vicap1>; + #power-domain-cells = <0>; + }; + + power-domain@RK3568_PD_VO { + reg = ; + clocks = <&cru HCLK_VO>, + <&cru PCLK_VO>, + <&cru ACLK_VOP_PRE>; + pm_qos = <&qos_hdcp>, + <&qos_vop_m0>, + <&qos_vop_m1>; + #power-domain-cells = <0>; + }; + + power-domain@RK3568_PD_RGA { + reg = ; + clocks = <&cru HCLK_RGA_PRE>, + <&cru PCLK_RGA_PRE>; + pm_qos = <&qos_ebc>, + <&qos_iep>, + <&qos_jpeg_dec>, + <&qos_jpeg_enc>, + <&qos_rga_rd>, + <&qos_rga_wr>; + #power-domain-cells = <0>; + }; + + power-domain@RK3568_PD_VPU { + reg = ; + clocks = <&cru HCLK_VPU_PRE>; + pm_qos = <&qos_vpu>; + #power-domain-cells = <0>; + }; + + power-domain@RK3568_PD_RKVDEC { + clocks = <&cru HCLK_RKVDEC_PRE>; + reg = ; + pm_qos = <&qos_rkvdec>; + #power-domain-cells = <0>; + }; + + power-domain@RK3568_PD_RKVENC { + reg = ; + clocks = <&cru HCLK_RKVENC_PRE>; + pm_qos = <&qos_rkvenc_rd_m0>, + <&qos_rkvenc_rd_m1>, + <&qos_rkvenc_wr_m0>; + #power-domain-cells = <0>; + }; + }; + }; + + sdmmc2: mmc@fe000000 { + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe000000 0x0 0x4000>; + interrupts = ; + clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>, + <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMC2>; + reset-names = "reset"; + status = "disabled"; + }; + + gmac1: ethernet@fe010000 { + compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; + reg = <0x0 0xfe010000 0x0 0x10000>; + interrupts = , + ; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>, + <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>, + <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>, + <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_refout", + "aclk_mac", "pclk_mac", + "clk_mac_speed", "ptp_ref"; + resets = <&cru SRST_A_GMAC1>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + snps,axi-config = <&gmac1_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + + gmac1_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <8>; + snps,wr_osr_lmt = <4>; + }; + + gmac1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + gmac1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + }; + + qos_gpu: qos@fe128000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe128000 0x0 0x20>; + }; + + qos_rkvenc_rd_m0: qos@fe138080 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe138080 0x0 0x20>; + }; + + qos_rkvenc_rd_m1: qos@fe138100 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe138100 0x0 0x20>; + }; + + qos_rkvenc_wr_m0: qos@fe138180 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe138180 0x0 0x20>; + }; + + qos_isp: qos@fe148000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe148000 0x0 0x20>; + }; + + qos_vicap0: qos@fe148080 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe148080 0x0 0x20>; + }; + + qos_vicap1: qos@fe148100 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe148100 0x0 0x20>; + }; + + qos_vpu: qos@fe150000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe150000 0x0 0x20>; + }; + + qos_ebc: qos@fe158000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158000 0x0 0x20>; + }; + + qos_iep: qos@fe158100 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158100 0x0 0x20>; + }; + + qos_jpeg_dec: qos@fe158180 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158180 0x0 0x20>; + }; + + qos_jpeg_enc: qos@fe158200 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158200 0x0 0x20>; + }; + + qos_rga_rd: qos@fe158280 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158280 0x0 0x20>; + }; + + qos_rga_wr: qos@fe158300 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158300 0x0 0x20>; + }; + + qos_npu: qos@fe180000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe180000 0x0 0x20>; + }; + + qos_pcie2x1: qos@fe190000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190000 0x0 0x20>; + }; + + qos_sata1: qos@fe190280 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190280 0x0 0x20>; + }; + + qos_sata2: qos@fe190300 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190300 0x0 0x20>; + }; + + qos_usb3_0: qos@fe190380 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190380 0x0 0x20>; + }; + + qos_usb3_1: qos@fe190400 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190400 0x0 0x20>; + }; + + qos_rkvdec: qos@fe198000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe198000 0x0 0x20>; + }; + + qos_hdcp: qos@fe1a8000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe1a8000 0x0 0x20>; + }; + + qos_vop_m0: qos@fe1a8080 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe1a8080 0x0 0x20>; + }; + + qos_vop_m1: qos@fe1a8100 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe1a8100 0x0 0x20>; + }; + + sdmmc0: mmc@fe2b0000 { + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe2b0000 0x0 0x4000>; + interrupts = ; + clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>, + <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMC0>; + reset-names = "reset"; + status = "disabled"; + }; + + sdmmc1: mmc@fe2c0000 { + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe2c0000 0x0 0x4000>; + interrupts = ; + clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>, + <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMC1>; + reset-names = "reset"; + status = "disabled"; + }; + + sdhci: mmc@fe310000 { + compatible = "rockchip,rk3568-dwcmshc"; + reg = <0x0 0xfe310000 0x0 0x10000>; + interrupts = ; + assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>; + assigned-clock-rates = <200000000>, <24000000>; + clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, + <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, + <&cru TCLK_EMMC>; + clock-names = "core", "bus", "axi", "block", "timer"; + status = "disabled"; + }; + + spdif: spdif@fe460000 { + compatible = "rockchip,rk3568-spdif"; + reg = <0x0 0xfe460000 0x0 0x1000>; + interrupts = ; + clock-names = "mclk", "hclk"; + clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>; + dmas = <&dmac1 1>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdifm0_tx>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1_8ch: i2s@fe410000 { + compatible = "rockchip,rk3568-i2s-tdm"; + reg = <0x0 0xfe410000 0x0 0x1000>; + interrupts = ; + assigned-clocks = <&cru CLK_I2S1_8CH_TX_SRC>, <&cru CLK_I2S1_8CH_RX_SRC>; + assigned-clock-rates = <1188000000>, <1188000000>; + clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, + <&cru HCLK_I2S1_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac1 3>, <&dmac1 2>; + dma-names = "rx", "tx"; + resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,grf = <&grf>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx + &i2s1m0_lrcktx &i2s1m0_lrckrx + &i2s1m0_sdi0 &i2s1m0_sdi1 + &i2s1m0_sdi2 &i2s1m0_sdi3 + &i2s1m0_sdo0 &i2s1m0_sdo1 + &i2s1m0_sdo2 &i2s1m0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + dmac0: dmac@fe530000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfe530000 0x0 0x4000>; + interrupts = , + ; + arm,pl330-periph-burst; + clocks = <&cru ACLK_BUS>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + dmac1: dmac@fe550000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfe550000 0x0 0x4000>; + interrupts = , + ; + arm,pl330-periph-burst; + clocks = <&cru ACLK_BUS>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + i2c1: i2c@fe5a0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5a0000 0x0 0x1000>; + interrupts = ; + clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c1_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@fe5b0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5b0000 0x0 0x1000>; + interrupts = ; + clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c2m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@fe5c0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5c0000 0x0 0x1000>; + interrupts = ; + clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c3m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@fe5d0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5d0000 0x0 0x1000>; + interrupts = ; + clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c4m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@fe5e0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5e0000 0x0 0x1000>; + interrupts = ; + clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c5m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@fe600000 { + compatible = "rockchip,rk3568-wdt", "snps,dw-wdt"; + reg = <0x0 0xfe600000 0x0 0x100>; + interrupts = ; + clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>; + clock-names = "tclk", "pclk"; + }; + + uart1: serial@fe650000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe650000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + pinctrl-0 = <&uart1m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@fe660000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe660000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 4>, <&dmac0 5>; + pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: serial@fe670000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe670000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 6>, <&dmac0 7>; + pinctrl-0 = <&uart3m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: serial@fe680000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe680000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 8>, <&dmac0 9>; + pinctrl-0 = <&uart4m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart5: serial@fe690000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe690000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 10>, <&dmac0 11>; + pinctrl-0 = <&uart5m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart6: serial@fe6a0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6a0000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 12>, <&dmac0 13>; + pinctrl-0 = <&uart6m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart7: serial@fe6b0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6b0000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 14>, <&dmac0 15>; + pinctrl-0 = <&uart7m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart8: serial@fe6c0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6c0000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 16>, <&dmac0 17>; + pinctrl-0 = <&uart8m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart9: serial@fe6d0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6d0000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 18>, <&dmac0 19>; + pinctrl-0 = <&uart9m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + thermal_zones: thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <100>; + polling-delay = <1000>; + + thermal-sensors = <&tsadc 0>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <20>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&tsadc 1>; + }; + }; + + tsadc: tsadc@fe710000 { + compatible = "rockchip,rk3568-tsadc"; + reg = <0x0 0xfe710000 0x0 0x100>; + interrupts = ; + assigned-clocks = <&cru CLK_TSADC_TSEN>, <&cru CLK_TSADC>; + assigned-clock-rates = <17000000>, <700000>; + clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>, + <&cru SRST_TSADCPHY>; + rockchip,grf = <&grf>; + rockchip,hw-tshut-temp = <95000>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&tsadc_pin>; + pinctrl-1 = <&tsadc_shutorg>; + pinctrl-2 = <&tsadc_pin>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + saradc: saradc@fe720000 { + compatible = "rockchip,rk3568-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xfe720000 0x0 0x100>; + interrupts = ; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + pwm4: pwm@fe6e0000 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6e0000 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm4_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@fe6e0010 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6e0010 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm5_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@fe6e0020 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6e0020 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm6_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@fe6e0030 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6e0030 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm7_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm8: pwm@fe6f0000 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6f0000 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm8m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm9: pwm@fe6f0010 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6f0010 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm9m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm10: pwm@fe6f0020 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6f0020 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm10m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm11: pwm@fe6f0030 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6f0030 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm11m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm12: pwm@fe700000 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe700000 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm12m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm13: pwm@fe700010 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe700010 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm13m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm14: pwm@fe700020 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe700020 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm14m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm15: pwm@fe700030 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe700030 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm15m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3568-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@fdd60000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfdd60000 0x0 0x100>; + interrupts = ; + clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@fe740000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe740000 0x0 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@fe750000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe750000 0x0 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@fe760000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe760000 0x0 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@fe770000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe770000 0x0 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +#include "rk3568-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index d56c742..71f6097 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -8,12 +8,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb - dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 42d1d21..5ad638b 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -973,4 +973,284 @@ clocks = <&k3_clks 53 0>; clock-names = "fck"; }; + + icssg0: icssg@30000000 { + compatible = "ti,am642-icssg"; + reg = <0x00 0x30000000 0x00 0x80000>; + power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x30000000 0x80000>; + + icssg0_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x10000>; + reg-names = "dram0", "dram1", "shrdram2"; + }; + + icssg0_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + icssg0_coreclk_mux: coreclk-mux@3c { + reg = <0x3c>; + #clock-cells = <0>; + clocks = <&k3_clks 81 0>, /* icssg0_core_clk */ + <&k3_clks 81 20>; /* icssg0_iclk */ + assigned-clocks = <&icssg0_coreclk_mux>; + assigned-clock-parents = <&k3_clks 81 20>; + }; + + icssg0_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&k3_clks 81 3>, /* icssg0_iep_clk */ + <&icssg0_coreclk_mux>; /* icssg0_coreclk_mux */ + assigned-clocks = <&icssg0_iepclk_mux>; + assigned-clock-parents = <&icssg0_coreclk_mux>; + }; + }; + }; + + icssg0_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x100>; + }; + + icssg0_mii_g_rt: mii-g-rt@33000 { + compatible = "ti,pruss-mii-g", "syscon"; + reg = <0x33000 0x1000>; + }; + + icssg0_intc: interrupt-controller@20000 { + compatible = "ti,icssg-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru0_0: pru@34000 { + compatible = "ti,am642-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x100>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-pru0_0-fw"; + }; + + rtu0_0: rtu@4000 { + compatible = "ti,am642-rtu"; + reg = <0x4000 0x2000>, + <0x23000 0x100>, + <0x23400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-rtu0_0-fw"; + }; + + tx_pru0_0: txpru@a000 { + compatible = "ti,am642-tx-pru"; + reg = <0xa000 0x1800>, + <0x25000 0x100>, + <0x25400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-txpru0_0-fw"; + }; + + pru0_1: pru@38000 { + compatible = "ti,am642-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x100>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-pru0_1-fw"; + }; + + rtu0_1: rtu@6000 { + compatible = "ti,am642-rtu"; + reg = <0x6000 0x2000>, + <0x23800 0x100>, + <0x23c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-rtu0_1-fw"; + }; + + tx_pru0_1: txpru@c000 { + compatible = "ti,am642-tx-pru"; + reg = <0xc000 0x1800>, + <0x25800 0x100>, + <0x25c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-txpru0_1-fw"; + }; + + icssg0_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + clocks = <&k3_clks 62 3>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + }; + }; + + icssg1: icssg@30080000 { + compatible = "ti,am642-icssg"; + reg = <0x00 0x30080000 0x00 0x80000>; + power-domains = <&k3_pds 82 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x30080000 0x80000>; + + icssg1_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x10000>; + reg-names = "dram0", "dram1", "shrdram2"; + }; + + icssg1_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + icssg1_coreclk_mux: coreclk-mux@3c { + reg = <0x3c>; + #clock-cells = <0>; + clocks = <&k3_clks 82 0>, /* icssg1_core_clk */ + <&k3_clks 82 20>; /* icssg1_iclk */ + assigned-clocks = <&icssg1_coreclk_mux>; + assigned-clock-parents = <&k3_clks 82 20>; + }; + + icssg1_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&k3_clks 82 3>, /* icssg1_iep_clk */ + <&icssg1_coreclk_mux>; /* icssg1_coreclk_mux */ + assigned-clocks = <&icssg1_iepclk_mux>; + assigned-clock-parents = <&icssg1_coreclk_mux>; + }; + }; + }; + + icssg1_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x100>; + }; + + icssg1_mii_g_rt: mii-g-rt@33000 { + compatible = "ti,pruss-mii-g", "syscon"; + reg = <0x33000 0x1000>; + }; + + icssg1_intc: interrupt-controller@20000 { + compatible = "ti,icssg-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru1_0: pru@34000 { + compatible = "ti,am642-pru"; + reg = <0x34000 0x4000>, + <0x22000 0x100>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-pru1_0-fw"; + }; + + rtu1_0: rtu@4000 { + compatible = "ti,am642-rtu"; + reg = <0x4000 0x2000>, + <0x23000 0x100>, + <0x23400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-rtu1_0-fw"; + }; + + tx_pru1_0: txpru@a000 { + compatible = "ti,am642-tx-pru"; + reg = <0xa000 0x1800>, + <0x25000 0x100>, + <0x25400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-txpru1_0-fw"; + }; + + pru1_1: pru@38000 { + compatible = "ti,am642-pru"; + reg = <0x38000 0x4000>, + <0x24000 0x100>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-pru1_1-fw"; + }; + + rtu1_1: rtu@6000 { + compatible = "ti,am642-rtu"; + reg = <0x6000 0x2000>, + <0x23800 0x100>, + <0x23c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-rtu1_1-fw"; + }; + + tx_pru1_1: txpru@c000 { + compatible = "ti,am642-tx-pru"; + reg = <0xc000 0x1800>, + <0x25800 0x100>, + <0x25c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-txpru1_1-fw"; + }; + + icssg1_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 82 0>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi index 59cc58f..2bb5c9f 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi @@ -97,4 +97,12 @@ clocks = <&k3_clks 79 0>; clock-names = "gpio"; }; + + mcu_pmx0: pinctrl@4084000 { + compatible = "pinctrl-single"; + reg = <0x00 0x4084000 0x00 0x84>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index de6805b..1209747 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -30,6 +30,8 @@ serial8 = &main_uart6; ethernet0 = &cpsw_port1; ethernet1 = &cpsw_port2; + mmc0 = &sdhci0; + mmc1 = &sdhci1; }; chosen { }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 24ce494..6726c4c 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -630,3 +630,11 @@ &epwm8 { status = "disabled"; }; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 6b45cde..6b04745 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -517,3 +517,11 @@ &epwm8 { status = "disabled"; }; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi new file mode 100644 index 0000000..51f902f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2021 + * + * Authors: + * Jan Kiszka + * + * Common bits of the IOT2050 Basic and Advanced variants, PG1 + */ + +&dss { + assigned-clocks = <&k3_clks 67 2>; + assigned-clock-parents = <&k3_clks 67 5>; +}; + +&serdes0 { + status = "disabled"; +}; + +&sdhci1 { + no-1-8-v; +}; + +&tx_pru0_0 { + status = "disabled"; +}; + +&tx_pru0_1 { + status = "disabled"; +}; + +&tx_pru1_0 { + status = "disabled"; +}; + +&tx_pru1_1 { + status = "disabled"; +}; + +&tx_pru2_0 { + status = "disabled"; +}; + +&tx_pru2_1 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi new file mode 100644 index 0000000..e73458c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2021 + * + * Authors: + * Chao Zeng + * Jan Kiszka + * + * Common bits of the IOT2050 Basic and Advanced variants, PG2 + */ + +&main_pmx0 { + cp2102n_reset_pin_default: cp2102n-reset-pin-default { + pinctrl-single,pins = < + /* (AF12) GPIO1_24, used as cp2102 reset */ + AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7) + >; + }; +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp2102n_reset_pin_default>; + gpio-line-names = + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "CP2102N-RESET"; +}; + +&dss { + /* Workaround needed to get DP clock of 154Mhz */ + assigned-clocks = <&k3_clks 67 0>; +}; + +&serdes0 { + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>; +}; + +&dwc3_0 { + assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + <&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */ + phys = <&serdes0 PHY_TYPE_USB3 0>; + phy-names = "usb3-phy"; +}; + +&usb0 { + maximum-speed = "super-speed"; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 1008e91..65da226 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -4,19 +4,19 @@ * * Authors: * Le Jin - * Jan Kiszka + * Jan Kiszka * - * Common bits of the IOT2050 Basic and Advanced variants + * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2 */ -/dts-v1/; - #include "k3-am654.dtsi" #include / { aliases { spi0 = &mcu_spi0; + mmc0 = &sdhci1; + mmc1 = &sdhci0; }; chosen { @@ -555,7 +555,6 @@ pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; - no-1-8-v; }; &usb0 { @@ -629,10 +628,6 @@ }; }; -&serdes0 { - status = "disabled"; -}; - &pcie0_rc { status = "disabled"; }; @@ -656,11 +651,21 @@ }; &mailbox0_cluster0 { - status = "disabled"; + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; }; &mailbox0_cluster1 { - status = "disabled"; + interrupts = <432>; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; }; &mailbox0_cluster2 { @@ -703,6 +708,18 @@ status = "disabled"; }; +&mcu_r5fss0_core0 { + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; +}; + +&mcu_r5fss0_core1 { + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; + mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; +}; + &icssg0_mdio { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index ba4e5d3..ce8bb4a 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -692,8 +692,8 @@ power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000 - 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; + ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000>, + <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; ti,syscon-pcie-id = <&pcie_devid>; ti,syscon-pcie-mode = <&pcie0_mode>; bus-range = <0x0 0xff>; @@ -725,8 +725,8 @@ power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000 - 0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; + ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000>, + <0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; ti,syscon-pcie-id = <&pcie_devid>; ti,syscon-pcie-mode = <&pcie1_mode>; bus-range = <0x0 0xff>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 9d21cdf..9c69d09 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -100,8 +100,4 @@ power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; }; - - thermal_zones: thermal-zones { - #include "k3-am654-industrial-thermal.dtsi" - }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index a9fc1af..a58a39f 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -31,6 +31,8 @@ i2c4 = &main_i2c2; i2c5 = &main_i2c3; ethernet0 = &cpsw_port1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; }; chosen { }; diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi new file mode 100644 index 0000000..4a9bf7d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Le Jin + * Jan Kiszka + * + * Common bits of the IOT2050 Basic variant, PG1 and PG2 + */ + +#include "k3-am65-iot2050-common.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + /* 1G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x40000000>; + }; + + cpus { + cpu-map { + /delete-node/ cluster1; + }; + /delete-node/ cpu@100; + /delete-node/ cpu@101; + }; + + /delete-node/ l2-cache1; +}; + +/* eMMC */ +&sdhci0 { + status = "disabled"; +}; + +&main_pmx0 { + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ + AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ + AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ + AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ + AM65X_IOPAD(0x0188, PIN_INPUT, 1) /* (D25) UART0_DCDn */ + AM65X_IOPAD(0x018c, PIN_INPUT, 1) /* (B26) UART0_DSRn */ + AM65X_IOPAD(0x0190, PIN_OUTPUT, 1) /* (A24) UART0_DTRn */ + AM65X_IOPAD(0x0194, PIN_INPUT, 1) /* (E24) UART0_RIN */ + >; + }; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + +&mcu_r5fss0 { + /* lock-step mode not supported on Basic boards */ + ti,cluster-mode = <0>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts new file mode 100644 index 0000000..c62549a --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Le Jin + * Jan Kiszka + * + * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 2 + * 1 GB RAM, no eMMC, main_uart0 on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html + */ + +/dts-v1/; + +#include "k3-am6528-iot2050-basic-common.dtsi" +#include "k3-am65-iot2050-common-pg2.dtsi" + +/ { + compatible = "siemens,iot2050-basic-pg2", "ti,am654"; + model = "SIMATIC IOT2050 Basic PG2"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts index 94bb5dd..87928ff 100644 --- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts @@ -4,63 +4,21 @@ * * Authors: * Le Jin - * Jan Kiszka + * Jan Kiszka * - * AM6528-based (dual-core) IOT2050 Basic variant + * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 1 * 1 GB RAM, no eMMC, main_uart0 on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html */ /dts-v1/; -#include "k3-am65-iot2050-common.dtsi" +#include "k3-am6528-iot2050-basic-common.dtsi" +#include "k3-am65-iot2050-common-pg1.dtsi" / { compatible = "siemens,iot2050-basic", "ti,am654"; model = "SIMATIC IOT2050 Basic"; - - memory@80000000 { - device_type = "memory"; - /* 1G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x40000000>; - }; - - cpus { - cpu-map { - /delete-node/ cluster1; - }; - /delete-node/ cpu@100; - /delete-node/ cpu@101; - }; - - /delete-node/ l2-cache1; -}; - -/* eMMC */ -&sdhci0 { - status = "disabled"; -}; - -&main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { - pinctrl-single,pins = < - AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ - AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ - AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ - AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ - AM65X_IOPAD(0x0188, PIN_INPUT, 1) /* (D25) UART0_DCDn */ - AM65X_IOPAD(0x018c, PIN_INPUT, 1) /* (B26) UART0_DSRn */ - AM65X_IOPAD(0x0190, PIN_OUTPUT, 1) /* (A24) UART0_DTRn */ - AM65X_IOPAD(0x0194, PIN_INPUT, 1) /* (E24) UART0_RIN */ - >; - }; -}; - -&main_uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; -}; - -&mcu_r5fss0 { - /* lock-step mode not supported on this board */ - ti,cluster-mode = <0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi index f0a6541..a892579 100644 --- a/arch/arm64/boot/dts/ti/k3-am654.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi @@ -112,4 +112,8 @@ compatible = "cache"; cache-level = <3>; }; + + thermal_zones: thermal-zones { + #include "k3-am654-industrial-thermal.dtsi" + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi new file mode 100644 index 0000000..d25e8b2 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Le Jin + * Jan Kiszka + * + * Common bits of the IOT2050 Advanced variant, PG1 and PG2 + */ + +/dts-v1/; + +#include "k3-am65-iot2050-common.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; +}; + +&main_pmx0 { + main_mmc0_pins_default: main-mmc0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ + AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ + AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ + AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ + AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ + AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ + AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ + AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ + AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ + AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ + AM65X_IOPAD(0x01b8, PIN_OUTPUT_PULLUP, 7) /* (B23) MMC0_SDWP */ + AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ + AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ + >; + }; +}; + +/* eMMC */ +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + bus-width = <8>; + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_uart0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts new file mode 100644 index 0000000..f00dc86 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Le Jin + * Jan Kiszka + * + * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 2 + * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html + */ + +/dts-v1/; + +#include "k3-am6548-iot2050-advanced-common.dtsi" +#include "k3-am65-iot2050-common-pg2.dtsi" + +/ { + compatible = "siemens,iot2050-advanced-pg2", "ti,am654"; + model = "SIMATIC IOT2050 Advanced PG2"; +}; + +&mcu_r5fss0 { + /* lock-step mode not supported on this board */ + ti,cluster-mode = <0>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts index ec9617c..077f165 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts @@ -4,57 +4,21 @@ * * Authors: * Le Jin - * Jan Kiszka + * Jan Kiszka * - * AM6548-based (quad-core) IOT2050 Advanced variant + * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 1 * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html */ /dts-v1/; -#include "k3-am65-iot2050-common.dtsi" +#include "k3-am6548-iot2050-advanced-common.dtsi" +#include "k3-am65-iot2050-common-pg1.dtsi" / { compatible = "siemens,iot2050-advanced", "ti,am654"; model = "SIMATIC IOT2050 Advanced"; - - memory@80000000 { - device_type = "memory"; - /* 2G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; -}; - -&main_pmx0 { - main_mmc0_pins_default: main-mmc0-pins-default { - pinctrl-single,pins = < - AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ - AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ - AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ - AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ - AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ - AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ - AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ - AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ - AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ - AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ - AM65X_IOPAD(0x01b8, PIN_OUTPUT_PULLUP, 7) /* (B23) MMC0_SDWP */ - AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ - AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ - >; - }; -}; - -/* eMMC */ -&sdhci0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; - bus-width = <8>; - non-removable; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - -&main_uart0 { - status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index d14f3c1..121975d 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -12,6 +12,9 @@ #include / { + compatible = "ti,j7200-evm", "ti,j7200"; + model = "Texas Instruments J7200 EVM"; + chosen { stdout-path = "serial2:115200n8"; bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index e8a41d0..d60ef4f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -606,10 +606,10 @@ clock-names = "fck"; #address-cells = <3>; #size-cells = <2>; - bus-range = <0x0 0xf>; + bus-range = <0x0 0xff>; cdns,no-bar-match-nbits = <64>; - vendor-id = /bits/ 16 <0x104c>; - device-id = /bits/ 16 <0xb00f>; + vendor-id = <0x104c>; + device-id = <0xb00f>; msi-map = <0x0 &gic_its 0x0 0x10000>; dma-coherent; ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>, @@ -633,6 +633,7 @@ clocks = <&k3_clks 240 6>; clock-names = "fck"; max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; dma-coherent; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi index b7005b8..47567cb 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -30,6 +30,8 @@ serial9 = &main_uart7; serial10 = &main_uart8; serial11 = &main_uart9; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; }; chosen { }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 8bd02d9..dc2bc67 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -12,6 +12,9 @@ #include / { + compatible = "ti,j721e-evm", "ti,j721e"; + model = "Texas Instruments J721e EVM"; + chosen { stdout-path = "serial2:115200n8"; bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index cf34823..08c8d1b 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -610,7 +610,7 @@ clock-names = "fck"; #address-cells = <3>; #size-cells = <2>; - bus-range = <0x0 0xf>; + bus-range = <0x0 0xff>; vendor-id = <0x104c>; device-id = <0xb00d>; msi-map = <0x0 &gic_its 0x0 0x10000>; @@ -636,7 +636,7 @@ clocks = <&k3_clks 239 1>; clock-names = "fck"; max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; dma-coherent; }; @@ -658,7 +658,7 @@ clock-names = "fck"; #address-cells = <3>; #size-cells = <2>; - bus-range = <0x0 0xf>; + bus-range = <0x0 0xff>; vendor-id = <0x104c>; device-id = <0xb00d>; msi-map = <0x0 &gic_its 0x10000 0x10000>; @@ -684,7 +684,7 @@ clocks = <&k3_clks 240 1>; clock-names = "fck"; max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; dma-coherent; }; @@ -706,7 +706,7 @@ clock-names = "fck"; #address-cells = <3>; #size-cells = <2>; - bus-range = <0x0 0xf>; + bus-range = <0x0 0xff>; vendor-id = <0x104c>; device-id = <0xb00d>; msi-map = <0x0 &gic_its 0x20000 0x10000>; @@ -732,7 +732,7 @@ clocks = <&k3_clks 241 1>; clock-names = "fck"; max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; dma-coherent; }; @@ -754,7 +754,7 @@ clock-names = "fck"; #address-cells = <3>; #size-cells = <2>; - bus-range = <0x0 0xf>; + bus-range = <0x0 0xff>; vendor-id = <0x104c>; device-id = <0xb00d>; msi-map = <0x0 &gic_its 0x30000 0x10000>; @@ -780,7 +780,7 @@ clocks = <&k3_clks 242 1>; clock-names = "fck"; max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; dma-coherent; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts new file mode 100644 index 0000000..b726310 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -0,0 +1,1002 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ + * + * J721E SK URL: https://www.ti.com/tool/SK-TDA4VM + */ + +/dts-v1/; + +#include "k3-j721e.dtsi" +#include +#include +#include + +/ { + compatible = "ti,j721e-sk", "ti,j721e"; + model = "Texas Instruments J721E SK"; + + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + }; + + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + alignment = <0x1000>; + no-map; + }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + c66_1_dma_memory_region: c66-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + c66_0_memory_region: c66-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + c66_0_dma_memory_region: c66-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + c66_1_memory_region: c66-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a8000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a8100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@aa000000 { + reg = <0x00 0xaa000000 0x00 0x01c00000>; + alignment = <0x1000>; + no-map; + }; + }; + + vusb_main: fixedregulator-vusb-main5v0 { + /* USB MAIN INPUT 5V DC */ + compatible = "regulator-fixed"; + regulator-name = "vusb-main5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output of LM5141 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vusb_main>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: fixedregulator-sd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_mmc1_en_pins_default>; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vsys_3v3>; + gpio = <&wkup_gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv_alt: gpio-regulator-tps659411 { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_alt_pins_default>; + regulator-name = "tps659411"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_3v3>; + gpios = <&wkup_gpio0 9 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + dp_pwr_3v3: fixedregulator-dp-prw { + compatible = "regulator-fixed"; + regulator-name = "dp-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&dp_pwr_en_pins_default>; + gpio = <&main_gpio0 111 0>; /* DP0_3V3 _EN */ + enable-active-high; + }; + +}; + +&main_pmx0 { + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ + J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ + J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ + J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */ + J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ + J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ + J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ + J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ + >; + }; + + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */ + J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */ + J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ + J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ + J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ + J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ + >; + }; + + main_i2c3_pins_default: main-i2c3-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ + J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ + >; + }; + + main_usbss0_pins_default: main-usbss0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ + J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ + >; + }; + + main_usbss1_pins_default: main-usbss1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ + >; + }; + + dp0_pins_default: dp0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ + >; + }; + + dp_pwr_en_pins_default: dp-pwr-en-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */ + >; + }; + + dss_vout0_pins_default: dss-vout0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */ + J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */ + J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */ + J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */ + J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */ + J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */ + J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */ + J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */ + J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23) PRG1_PRU1_GPO8.VOUT0_DATA8 */ + J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */ + J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */ + J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */ + J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */ + J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */ + J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */ + J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */ + J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */ + J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */ + J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */ + J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */ + J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */ + J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */ + J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */ + J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */ + J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */ + J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */ + J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */ + J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */ + >; + }; + + /* Reset for M.2 E Key slot on PCIe0 */ + ekey_reset_pins_default: ekey-reset-pns-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */ + >; + }; +}; + +&wkup_pmx0 { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ + J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */ + J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */ + J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */ + J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */ + J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */ + J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */ + J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */ + J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */ + J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */ + J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio1-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */ + J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */ + >; + }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */ + J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */ + J721E_WKUP_IOPAD(0xc, PIN_INPUT, 0) /* (D20) MCU_OSPI0_D0 */ + J721E_WKUP_IOPAD(0x10, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D1 */ + J721E_WKUP_IOPAD(0x14, PIN_INPUT, 0) /* (G20) MCU_OSPI0_D2 */ + J721E_WKUP_IOPAD(0x18, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D3 */ + J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 0) /* (F21) MCU_OSPI0_D4 */ + J721E_WKUP_IOPAD(0x20, PIN_INPUT, 0) /* (E21) MCU_OSPI0_D5 */ + J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */ + J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */ + J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */ + >; + }; + + vdd_mmc1_en_pins_default: vdd-mmc1-en-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */ + >; + }; + + vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ + J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ + >; + }; + + /* Reset for M.2 M Key slot on PCIe1 */ + mkey_reset_pins_default: mkey-reset-pns-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */ + >; + }; +}; + +&wkup_uart0 { + /* Wakeup UART is used by System firmware */ + status = "reserved"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + /* Shared with ATF on this platform */ + power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; +}; + +&main_uart2 { + /* Brought out on RPi header */ + status = "disabled"; +}; + +&main_uart3 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart5 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart6 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart7 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart8 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart9 { + /* Brought out on M.2 E Key */ + status = "disabled"; +}; + +&main_sdhci0 { + /* Unused */ + status = "disabled"; +}; + +&main_sdhci1 { + /* SD Card */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv_alt>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_sdhci2 { + /* Unused */ + status = "disabled"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&ospi1 { + /* Unused */ + status = "disabled"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + i2c-mux@71 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + /* PCIe1 M.2 M Key I2C */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + /* PCIe0 M.2 E Key I2C */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + /* i2c1 is used for DVI DDC, so we need to use 100kHz */ + clock-frequency = <100000>; +}; + +&main_i2c2 { + /* Unused */ + status = "disabled"; +}; + +&main_i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c3_pins_default>; + clock-frequency = <400000>; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + /* CSI0 I2C */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + /* CSI1 I2C */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&main_i2c4 { + /* Unused */ + status = "disabled"; +}; + +&main_i2c5 { + /* Brought out on RPi Header */ + status = "disabled"; +}; + +&main_i2c6 { + /* Unused */ + status = "disabled"; +}; + +&main_gpio2 { + status = "disabled"; +}; + +&main_gpio3 { + status = "disabled"; +}; + +&main_gpio4 { + status = "disabled"; +}; + +&main_gpio5 { + status = "disabled"; +}; + +&main_gpio6 { + status = "disabled"; +}; + +&main_gpio7 { + status = "disabled"; +}; + +&wkup_gpio1 { + status = "disabled"; +}; + +&main_r5fss0_core0{ + firmware-name = "pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f"; +}; + +&usb_serdes_mux { + idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ +}; + +&serdes_ln_ctrl { + idle-states = , , + , , + , , + , , + , , + , ; +}; + +&serdes_wiz3 { + typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>; + typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */ +}; + +&serdes3 { + serdes3_usb_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>; + }; +}; + +&usbss0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss0_pins_default>; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "super-speed"; + phys = <&serdes3_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + +&serdes2 { + serdes2_usb_link: phy@1 { + reg = <1>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz2 2>; + }; +}; + +&usbss1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss1_pins_default>; + ti,vbus-divider; +}; + +&usb1 { + dr_mode = "host"; + maximum-speed = "super-speed"; + phys = <&serdes2_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + +&tscadc0 { + /* Unused */ + status = "disabled"; +}; + +&tscadc1 { + /* Unused */ + status = "disabled"; +}; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = ; + ti,fifo-depth = ; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&dss_vout0_pins_default>; + + assigned-clocks = <&k3_clks 152 1>, /* VP 1 pixel clock */ + <&k3_clks 152 4>, /* VP 2 pixel clock */ + <&k3_clks 152 9>, /* VP 3 pixel clock */ + <&k3_clks 152 13>; /* VP 4 pixel clock */ + assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */ + <&k3_clks 152 6>, /* DPI0_EXT_CLKSEL_OUT0 */ + <&k3_clks 152 11>, /* PLL18_HSDIV0 */ + <&k3_clks 152 18>; /* DPI1_EXT_CLKSEL_OUT0 */ +}; + +&mcasp0 { + /* Unused */ + status = "disabled"; +}; + +&mcasp1 { + /* Unused */ + status = "disabled"; +}; + +&mcasp2 { + /* Unused */ + status = "disabled"; +}; + +&mcasp3 { + /* Unused */ + status = "disabled"; +}; + +&mcasp4 { + /* Unused */ + status = "disabled"; +}; + +&mcasp5 { + /* Unused */ + status = "disabled"; +}; + +&mcasp6 { + /* Brought out on RPi header */ + status = "disabled"; +}; + +&mcasp7 { + /* Unused */ + status = "disabled"; +}; + +&mcasp8 { + /* Unused */ + status = "disabled"; +}; + +&mcasp9 { + /* Unused */ + status = "disabled"; +}; + +&mcasp10 { + /* Unused */ + status = "disabled"; +}; + +&mcasp11 { + /* Brought out on M.2 E Key */ + status = "disabled"; +}; + +&serdes0 { + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz0 1>; + }; +}; + +&serdes1 { + serdes1_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; + }; +}; + +&pcie0_rc { + pinctrl-names = "default"; + pinctrl-0 = <&ekey_reset_pins_default>; + reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>; + + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + +&pcie1_rc { + pinctrl-names = "default"; + pinctrl-0 = <&mkey_reset_pins_default>; + reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>; + + phys = <&serdes1_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie2_rc { + /* Unused */ + status = "disabled"; +}; + +&pcie0_ep { + status = "disabled"; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + +&pcie1_ep { + status = "disabled"; + phys = <&serdes1_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie2_ep { + /* Unused */ + status = "disabled"; +}; + +&pcie3_rc { + /* Unused */ + status = "disabled"; +}; + +&pcie3_ep { + /* Unused */ + status = "disabled"; +}; + +&dss { + status = "disabled"; +}; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; + +&ufs_wrapper { + status = "disabled"; +}; + +&mailbox0_cluster0 { + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <432>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + interrupts = <428>; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster3 { + interrupts = <424>; + + mbox_c66_0: mbox-c66-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c66_1: mbox-c66-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + interrupts = <420>; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&c66_0 { + mboxes = <&mailbox0_cluster3 &mbox_c66_0>; + memory-region = <&c66_0_dma_memory_region>, + <&c66_0_memory_region>; +}; + +&c66_1 { + mboxes = <&mailbox0_cluster3 &mbox_c66_1>; + memory-region = <&c66_1_dma_memory_region>, + <&c66_1_memory_region>; +}; + +&c71_0 { + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index f0587fd..214359e 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -31,6 +31,9 @@ serial10 = &main_uart8; serial11 = &main_uart9; ethernet0 = &cpsw_port1; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + mmc2 = &main_sdhci2; }; chosen { }; diff --git a/arch/arm64/boot/dts/toshiba/Makefile b/arch/arm64/boot/dts/toshiba/Makefile index 8cd460d..7ccb466 100644 --- a/arch/arm64/boot/dts/toshiba/Makefile +++ b/arch/arm64/boot/dts/toshiba/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb +dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-visrobo-vrb.dtb diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts index 29a4d9f..9375b0f 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts @@ -76,3 +76,9 @@ &pwm { status = "okay"; }; + +&pcie { + status = "okay"; + clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>; + clock-names = "ref", "core", "aux"; +}; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts new file mode 100644 index 0000000..d081746 --- /dev/null +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree File for TMPV7708 VisROBO VRB board + * + * (C) Copyright 2020, 2021, Toshiba Corporation. + * (C) Copyright 2020, Nobuhiro Iwamatsu + */ + +/dts-v1/; + +#include "tmpv7708-visrobo-vrc.dtsi" + +/ { + model = "Toshiba TMPV7708 VisROBO (VRB) board"; + compatible = "toshiba,tmpv7708-visrobo-vrb", "toshiba,tmpv7708"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 768MB memory */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x30000000>; + }; +}; + +&uart0 { + status = "okay"; + clocks = <&uart_clk>; + clock-names = "apb_pclk"; +}; + +&uart1 { + status = "okay"; + clocks = <&uart_clk>; + clock-names = "apb_pclk"; +}; + +&piether { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + clocks = <&clk300mhz>, <&clk125mhz>; + clock-names = "stmmaceth", "phy_ref_clk"; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <0x1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi new file mode 100644 index 0000000..f0a93db --- /dev/null +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree File for TMPV7708 VisROBO VRC SoM + * + * (C) Copyright 2020, 2021, Toshiba Corporation. + * (C) Copyright 2020, Nobuhiro Iwamatsu + */ + +/dts-v1/; + +#include "tmpv7708.dtsi" +#include + +&wdt { + status = "okay"; + clocks = <&wdt_clk>; +}; + +&gpio { + status = "okay"; +}; + +&spi0_pins { + groups = "spi0_grp", "spi0_cs0_grp"; +}; + +&spi0 { + status = "okay"; + clocks = <&clk300mhz>, <&clk150mhz>; + clock-names = "sspclk", "apb_pclk"; + + mmc-slot@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + voltage-ranges = <3200 3400>; + spi-max-frequency = <12000000>; + }; +}; + +&i2c0 { + status = "okay"; + clocks = <&clk150mhz>; +}; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi index 4b4231f..01d7ee6 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi @@ -134,6 +134,13 @@ #clock-cells = <0>; }; + clk25mhz: clk25mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "clk25mhz"; + }; + clk125mhz: clk125mhz { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -141,6 +148,13 @@ clock-output-names = "clk125mhz"; }; + clk150mhz: clk150mhz { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + clock-output-names = "clk150mhz"; + }; + clk300mhz: clk300mhz { compatible = "fixed-clock"; clock-frequency = <300000000>; @@ -148,6 +162,20 @@ clock-output-names = "clk300mhz"; }; + clk600mhz: clk600mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + clock-output-names = "clk600mhz"; + }; + + extclk100mhz: extclk100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "extclk100mhz"; + }; + wdt_clk: wdt-clk { compatible = "fixed-clock"; clock-frequency = <150000000>; @@ -441,6 +469,37 @@ #pwm-cells = <2>; status = "disabled"; }; + + pcie: pcie@28400000 { + compatible = "toshiba,visconti-pcie"; + reg = <0x0 0x28400000 0x0 0x00400000>, + <0x0 0x70000000 0x0 0x10000000>, + <0x0 0x28050000 0x0 0x00010000>, + <0x0 0x24200000 0x0 0x00002000>, + <0x0 0x24162000 0x0 0x00001000>; + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; + device_type = "pci"; + bus-range = <0x00 0xff>; + num-lanes = <2>; + num-viewport = <8>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000 + 0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>; + interrupts = , + ; + interrupt-names = "msi", "intr"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = + <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + max-link-speed = <2>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 11fb4fd..4e15954 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -12,7 +12,21 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.1.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb + +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb + +sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo +sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo +smk-k26-revA-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo +smk-k26-revA-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo + +dtb-$(CONFIG_ARCH_ZYNQMP) += sm-k26-revA-sck-kv-g-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += sm-k26-revA-sck-kv-g-revB.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += smk-k26-revA-sm-k26-revA-sck-kv-g-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += smk-k26-revA-sm-k26-revA-sck-kv-g-revB.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index cf52952..1e0b1bc 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -2,7 +2,7 @@ /* * Clock specification for Xilinx ZynqMP * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -40,6 +40,17 @@ }; }; +&zynqmp_firmware { + zynqmp_clk: clock-controller { + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clk"; + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, + <&aux_ref_clk>, <>_crx_ref_clk>; + clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk", + "aux_ref_clk", "gt_crx_ref_clk"; + }; +}; + &can0 { clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts new file mode 100644 index 0000000..b610e65 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KV260 revA Carrier Card + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * SD level shifter: + * "A" – A01 board un-modified (NXP) + * "Y" – A01 board modified with legacy interposer (Nexperia) + * "Z" – A01 board modified with Diode interposer + * + * Michal Simek + */ + +#include +#include +#include +#include + +/dts-v1/; +/plugin/; + +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + /* u14 - 0x40 - ina260 */ + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + +&amba { + si5332_0: si5332_0 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_2: si5332_2 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + si5332_3: si5332_3 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + si5332_4: si5332_4 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_5: si5332_5 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +/* DP/USB 3.0 and SATA */ +&psgtr { + status = "okay"; + /* pcie, usb3, sata */ + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 2>; +}; + +&zynqmp_dpsub { + status = "disabled"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + /* missing usb5744 - u43 */ +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&sdhci1 { /* on CC with tuned parameters */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + /* + * SD 3.0 requires level shifter and this property + * should be removed if the board has level shifter and + * need to work in UHS mode + */ + no-1-8-v; + disable-wp; + xlnx,mio-bank = <1>; +}; + +&gem3 { /* required by spec */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + reset-delay-us = <2>; + + phy0: ethernet-phy@1 { + #phy-cells = <1>; + reg = <1>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + }; + }; +}; + +&pinctrl0 { /* required by spec */ + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem3_default: gem3-default { + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO72", "MIO74"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO71", "MIO73", "MIO75"; + bias-disable; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", + "MIO67", "MIO68", "MIO69"; + bias-disable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts new file mode 100644 index 0000000..a52dafb --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KV260 revA Carrier Card + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * Michal Simek + */ + +#include +#include +#include +#include + +/dts-v1/; +/plugin/; + +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + /* u14 - 0x40 - ina260 */ + /* u43 - 0x2d - usb5744 */ + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + +&amba { + si5332_0: si5332_0 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_2: si5332_2 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + si5332_3: si5332_3 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + si5332_4: si5332_4 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_5: si5332_5 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +/* DP/USB 3.0 */ +&psgtr { + status = "okay"; + /* pcie, usb3, sata */ + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&zynqmp_dpsub { + status = "disabled"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&sdhci1 { /* on CC with tuned parameters */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + /* + * SD 3.0 requires level shifter and this property + * should be removed if the board has level shifter and + * need to work in UHS mode + */ + no-1-8-v; + disable-wp; + xlnx,mio-bank = <1>; + clk-phase-sd-hs = <126>, <60>; + clk-phase-uhs-sdr25 = <120>, <60>; + clk-phase-uhs-ddr50 = <126>, <48>; +}; + +&gem3 { /* required by spec */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + reset-delay-us = <2>; + + phy0: ethernet-phy@1 { + #phy-cells = <1>; + reg = <1>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + }; + }; +}; + +&pinctrl0 { /* required by spec */ + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem3_default: gem3-default { + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO72", "MIO74"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO71", "MIO73", "MIO75"; + bias-disable; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", + "MIO67", "MIO68", "MIO69"; + bias-disable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts new file mode 100644 index 0000000..550b389 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP SM-K26 rev1/B/A + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include +#include +#include + +/ { + model = "ZynqMP SM-K26 Rev1/B/A"; + compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB", + "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26", + "xlnx,zynqmp"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + nvmem0 = &eeprom; + nvmem1 = &eeprom_cc; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + spi0 = &qspi; + spi1 = &spi0; + spi2 = &spi1; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial1:115200n8"; + }; + + memory@0 { + device_type = "memory"; /* 4GB */ + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + fwuen { + label = "fwuen"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + ds35-led { + label = "heartbeat"; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds36-led { + label = "vbus_det"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&uart1 { /* MIO36/MIO37 */ + status = "okay"; +}; + +&qspi { /* MIO 0-5 - U143 */ + status = "okay"; + flash@0 { /* MT25QU512A */ + compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; /* 40MHz */ + partition@0 { + label = "Image Selector"; + reg = <0x0 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@80000 { + label = "Image Selector Golden"; + reg = <0x80000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@100000 { + label = "Persistent Register"; + reg = <0x100000 0x20000>; /* 128KB */ + }; + partition@120000 { + label = "Persistent Register Backup"; + reg = <0x120000 0x20000>; /* 128KB */ + }; + partition@140000 { + label = "Open_1"; + reg = <0x140000 0xC0000>; /* 768KB */ + }; + partition@200000 { + label = "Image A (FSBL, PMU, ATF, U-Boot)"; + reg = <0x200000 0xD00000>; /* 13MB */ + }; + partition@f00000 { + label = "ImgSel Image A Catch"; + reg = <0xF00000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@f80000 { + label = "Image B (FSBL, PMU, ATF, U-Boot)"; + reg = <0xF80000 0xD00000>; /* 13MB */ + }; + partition@1c80000 { + label = "ImgSel Image B Catch"; + reg = <0x1C80000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@1d00000 { + label = "Open_2"; + reg = <0x1D00000 0x100000>; /* 1MB */ + }; + partition@1e00000 { + label = "Recovery Image"; + reg = <0x1E00000 0x200000>; /* 2MB */ + read-only; + lock; + }; + partition@2000000 { + label = "Recovery Image Backup"; + reg = <0x2000000 0x200000>; /* 2MB */ + read-only; + lock; + }; + partition@2200000 { + label = "U-Boot storage variables"; + reg = <0x2200000 0x20000>; /* 128KB */ + }; + partition@2220000 { + label = "U-Boot storage variables backup"; + reg = <0x2220000 0x20000>; /* 128KB */ + }; + partition@2240000 { + label = "SHA256"; + reg = <0x2240000 0x10000>; /* 256B but 64KB sector */ + read-only; + lock; + }; + partition@2250000 { + label = "User"; + reg = <0x2250000 0x1db0000>; /* 29.5 MB */ + }; + }; +}; + +&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio-bank = <0>; +}; + +&spi1 { /* MIO6, 9-11 */ + status = "okay"; + label = "TPM"; + num-cs = <1>; + tpm@0 { /* slm9670 - U144 */ + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <18500000>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + eeprom: eeprom@50 { /* u46 - also at address 0x58 */ + compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ + reg = <0x50>; + /* WP pin EE_WP_EN connected to slg7x644092@68 */ + }; + + eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */ + compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ + reg = <0x51>; + }; + + /* da9062@30 - u170 - also at address 0x31 */ + /* da9131@33 - u167 */ + da9131: pmic@33 { + compatible = "dlg,da9131"; + reg = <0x33>; + regulators { + da9131_buck1: buck1 { + regulator-name = "da9131_buck1"; + regulator-boot-on; + regulator-always-on; + }; + da9131_buck2: buck2 { + regulator-name = "da9131_buck2"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + /* da9130@32 - u166 */ + da9130: pmic@32 { + compatible = "dlg,da9130"; + reg = <0x32>; + regulators { + da9130_buck1: buck1 { + regulator-name = "da9130_buck1"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + /* slg7x644091@70 - u168 NOT accessible due to address conflict with stdp4320 */ + /* + * stdp4320 - u27 FW has below two issues to be fixed in next board revision. + * Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76. + * Address conflict with slg7x644091@70 making both the devices NOT accessible. + * With the FW fix, stdp4320 should respond to address 0x73 only. + */ + /* slg7x644092@68 - u169 */ + /* Also connected via JA1C as C23/C24 */ +}; + +&gpio { + status = "okay"; + gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */ + "QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */ + "SPI_MISO", "SPI_MOSI", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST", "I2C1_SCL", /* 20 - 24 */ + "I2C1_SDA", "", "", "", "", /* 25 - 29 */ + "", "", "", "", "", /* 30 - 34 */ + "", "", "", "", "", /* 35 - 39 */ + "", "", "", "", "", /* 40 - 44 */ + "", "", "", "", "", /* 45 - 49 */ + "", "", "", "", "", /* 50 - 54 */ + "", "", "", "", "", /* 55 - 59 */ + "", "", "", "", "", /* 60 - 64 */ + "", "", "", "", "", /* 65 - 69 */ + "", "", "", "", "", /* 70 - 74 */ + "", "", "", /* 75 - 77, MIO end and EMIO start */ + "", "", /* 78 - 79 */ + "", "", "", "", "", /* 80 - 84 */ + "", "", "", "", "", /* 85 - 89 */ + "", "", "", "", "", /* 90 - 94 */ + "", "", "", "", "", /* 95 - 99 */ + "", "", "", "", "", /* 100 - 104 */ + "", "", "", "", "", /* 105 - 109 */ + "", "", "", "", "", /* 110 - 114 */ + "", "", "", "", "", /* 115 - 119 */ + "", "", "", "", "", /* 120 - 124 */ + "", "", "", "", "", /* 125 - 129 */ + "", "", "", "", "", /* 130 - 134 */ + "", "", "", "", "", /* 135 - 139 */ + "", "", "", "", "", /* 140 - 144 */ + "", "", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts new file mode 100644 index 0000000..c70966c --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP SMK-K26 rev1/B/A + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * Michal Simek + */ + +#include "zynqmp-sm-k26-revA.dts" + +/ { + model = "ZynqMP SMK-K26 Rev1/B/A"; + compatible = "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB", + "xlnx,zynqmp-smk-k26-revA", "xlnx,zynqmp-smk-k26", + "xlnx,zynqmp"; +}; + +&sdhci0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts index 2e05fa4..f159852 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1232 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -19,6 +19,7 @@ aliases { serial0 = &uart0; serial1 = &dcc; + spi0 = &qspi; }; chosen { @@ -36,6 +37,19 @@ status = "okay"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &sata { status = "okay"; /* SATA OOB timing settings */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts index 3d0aaa0..04efa16 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1254 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek * Siva Durga Prasad Paladugu @@ -20,6 +20,7 @@ aliases { serial0 = &uart0; serial1 = &dcc; + spi0 = &qspi; }; chosen { @@ -37,6 +38,19 @@ status = "okay"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts index 66a9048..e971ba8 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1275 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek * Siva Durga Prasad Paladugu @@ -20,6 +20,7 @@ aliases { serial0 = &uart0; serial1 = &dcc; + spi0 = &qspi; }; chosen { @@ -37,6 +38,21 @@ status = "okay"; }; +&gpio { + status = "okay"; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts index 69f6e46..b05be25 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm015-dc1 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -11,7 +11,9 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" +#include #include +#include / { model = "ZynqMP zc1751-xm015-dc1 RevA"; @@ -24,6 +26,8 @@ mmc1 = &sdhci1; rtc0 = &rtc; serial0 = &uart0; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -35,6 +39,24 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + + clock_si5338_0: clk27 { /* u55 SI5338-GM */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + clock_si5338_2: clk26 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clock_si5338_3: clk150 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <150000000>; + }; }; &fpd_dma_chan1 { @@ -73,6 +95,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@0 { reg = <0>; }; @@ -80,12 +104,19 @@ &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; eeprom: eeprom@55 { compatible = "atmel,24c64"; /* 24AA64 */ @@ -93,6 +124,236 @@ }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_9_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_9_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_36_grp", "gpio0_37_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_36_grp", "gpio0_37_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_8_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_8_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO34"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO35"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_0_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio0_cd_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "sdio0_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-wp { + groups = "sdio0_wp_0_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "sdio0_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-wp { + groups = "sdio1_wp_0_grp"; + function = "sdio1_wp"; + }; + + conf-wp { + groups = "sdio1_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux { + function = "gpio0"; + groups = "gpio0_38_grp"; + }; + + conf { + groups = "gpio0_38_grp"; + bias-disable; + slew-rate = ; + power-source = ; + }; + }; +}; + +&psgtr { + status = "okay"; + /* dp, usb3, sata */ + clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>; + clock-names = "ref1", "ref2", "ref3"; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &rtc { status = "okay"; }; @@ -108,25 +369,60 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 3>; }; /* eMMC */ &sdhci0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; bus-width = <8>; + xlnx,mio-bank = <0>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, + <&psgtr 0 PHY_TYPE_DP 1 1>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index 4a86efa..938b76b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -12,14 +12,13 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include +#include / { model = "ZynqMP zc1751-xm016-dc2 RevA"; compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; aliases { - can0 = &can0; - can1 = &can1; ethernet0 = &gem2; i2c0 = &i2c0; rtc0 = &rtc; @@ -27,6 +26,7 @@ serial1 = &uart1; spi0 = &spi0; spi1 = &spi1; + usb0 = &usb1; }; chosen { @@ -42,10 +42,14 @@ &can0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; }; &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &fpd_dma_chan1 { @@ -84,6 +88,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem2_default>; phy0: ethernet-phy@5 { reg = <5>; ti,rx-internal-delay = <0x8>; @@ -100,6 +106,11 @@ &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; tca6416_u26: gpio@20 { compatible = "ti,tca6416"; @@ -115,6 +126,311 @@ }; }; +&nand0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand0_default>; + arasan,has-mdma; + + nand@0 { + reg = <0x0>; + #address-cells = <0x2>; + #size-cells = <0x1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + nand-rb = <0>; + label = "main-storage-0"; + }; + nand@1 { + reg = <0x1>; + #address-cells = <0x2>; + #size-cells = <0x1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + nand-rb = <0>; + label = "main-storage-1"; + }; +}; + +&pinctrl0 { + status = "okay"; + pinctrl_can0_default: can0-default { + mux { + function = "can0"; + groups = "can0_9_grp"; + }; + + conf { + groups = "can0_9_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO38"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO39"; + bias-disable; + }; + }; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_8_grp"; + }; + + conf { + groups = "can1_8_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO33"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO32"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_1_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_1_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_6_grp", "gpio0_7_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_6_grp", "gpio0_7_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_10_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_10_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO42"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO43"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO41"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO40"; + bias-disable; + }; + }; + + pinctrl_usb1_default: usb1-default { + mux { + groups = "usb1_0_grp"; + function = "usb1"; + }; + + conf { + groups = "usb1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO64", "MIO65", "MIO67"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", + "MIO72", "MIO73", "MIO74", "MIO75"; + bias-disable; + }; + }; + + pinctrl_gem2_default: gem2-default { + mux { + function = "ethernet2"; + groups = "ethernet2_0_grp"; + }; + + conf { + groups = "ethernet2_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", + "MIO63"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO52", "MIO53", "MIO54", "MIO55", "MIO56", + "MIO57"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio2"; + groups = "mdio2_0_grp"; + }; + + conf-mdio { + groups = "mdio2_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_nand0_default: nand0-default { + mux { + groups = "nand0_0_grp"; + function = "nand0"; + }; + + conf { + groups = "nand0_0_grp"; + bias-pull-up; + }; + + mux-ce { + groups = "nand0_ce_0_grp"; + function = "nand0_ce"; + }; + + conf-ce { + groups = "nand0_ce_0_grp"; + bias-pull-up; + }; + + mux-rb { + groups = "nand0_rb_0_grp"; + function = "nand0_rb"; + }; + + conf-rb { + groups = "nand0_rb_0_grp"; + bias-pull-up; + }; + + mux-dqs { + groups = "nand0_dqs_0_grp"; + function = "nand0_dqs"; + }; + + conf-dqs { + groups = "nand0_dqs_0_grp"; + bias-pull-up; + }; + }; + + pinctrl_spi0_default: spi0-default { + mux { + groups = "spi0_0_grp"; + function = "spi0"; + }; + + conf { + groups = "spi0_0_grp"; + bias-disable; + slew-rate = ; + power-source = ; + }; + + mux-cs { + groups = "spi0_ss_0_grp", "spi0_ss_1_grp", + "spi0_ss_2_grp"; + function = "spi0_ss"; + }; + + conf-cs { + groups = "spi0_ss_0_grp", "spi0_ss_1_grp", + "spi0_ss_2_grp"; + bias-disable; + }; + }; + + pinctrl_spi1_default: spi1-default { + mux { + groups = "spi1_3_grp"; + function = "spi1"; + }; + + conf { + groups = "spi1_3_grp"; + bias-disable; + slew-rate = ; + power-source = ; + }; + + mux-cs { + groups = "spi1_ss_9_grp", "spi1_ss_10_grp", + "spi1_ss_11_grp"; + function = "spi1_ss"; + }; + + conf-cs { + groups = "spi1_ss_9_grp", "spi1_ss_10_grp", + "spi1_ss_11_grp"; + bias-disable; + }; + }; +}; + &rtc { status = "okay"; }; @@ -122,6 +438,8 @@ &spi0 { status = "okay"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; spi0_flash0: flash@0 { #address-cells = <1>; @@ -131,7 +449,7 @@ reg = <0>; partition@0 { - label = "data"; + label = "spi0-data"; reg = <0x0 0x100000>; }; }; @@ -140,6 +458,8 @@ &spi1 { status = "okay"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; spi1_flash0: flash@0 { #address-cells = <1>; @@ -149,7 +469,7 @@ reg = <0>; partition@0 { - label = "data"; + label = "spi1-data"; reg = <0x0 0x84000>; }; }; @@ -158,13 +478,25 @@ /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_default>; +}; + +&dwc3_1 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts index 4ea6ef5..381cc68 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm017-dc3 * - * (C) Copyright 2016 - 2019, Xilinx, Inc. + * (C) Copyright 2016 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -11,6 +11,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" +#include / { model = "ZynqMP zc1751-xm017-dc3 RevA"; @@ -24,6 +25,8 @@ rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; + usb0 = &usb0; + usb1 = &usb1; }; chosen { @@ -35,6 +38,18 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + + clock_si5338_2: clk26 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clock_si5338_3: clk125 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; }; &fpd_dma_chan1 { @@ -107,6 +122,20 @@ clock-frequency = <400000>; }; +/* MT29F64G08AECDBJ4-6 */ +&nand0 { + status = "okay"; + arasan,has-mdma; + num-cs = <2>; +}; + +&psgtr { + status = "okay"; + /* usb3, sata */ + clocks = <&clock_si5338_2>, <&clock_si5338_3>; + clock-names = "ref2", "ref3"; +}; + &rtc { status = "okay"; }; @@ -122,6 +151,8 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 2 PHY_TYPE_SATA 0 3>; }; &sdhci1 { /* emmc with some settings */ @@ -140,11 +171,27 @@ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; +}; + +&dwc3_1 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts index 2366cd9..05a2b79 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm018-dc4 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -26,6 +26,7 @@ rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; + spi0 = &qspi; }; chosen { @@ -161,6 +162,19 @@ status = "okay"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &rtc { status = "okay"; }; @@ -176,3 +190,11 @@ &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts index 41934e3..ae2d03d 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm019-dc5 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Siva Durga Prasad * Michal Simek @@ -13,6 +13,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include +#include / { model = "ZynqMP zc1751-xm019-dc5 RevA"; @@ -74,6 +75,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem1_default>; phy0: ethernet-phy@0 { reg = <0>; }; @@ -85,41 +88,366 @@ &i2c0 { status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>; }; &i2c1 { status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>; + +}; + +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_18_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_18_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_74_grp", "gpio0_75_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_74_grp", "gpio0_75_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_19_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_19_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_76_grp", "gpio0_77_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_76_grp", "gpio0_77_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_17_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_17_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO71"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_18_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_18_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO73"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO72"; + bias-disable; + }; + }; + + pinctrl_gem1_default: gem1-default { + mux { + function = "ethernet1"; + groups = "ethernet1_0_grp"; + }; + + conf { + groups = "ethernet1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO44", "MIO45", "MIO46", "MIO47", "MIO48", + "MIO49"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO38", "MIO39", "MIO40", "MIO41", "MIO42", + "MIO43"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio1"; + groups = "mdio1_0_grp"; + }; + + conf-mdio { + groups = "mdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_0_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio0_cd_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "sdio0_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-wp { + groups = "sdio0_wp_0_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "sdio0_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_watchdog0_default: watchdog0-default { + mux-clk { + groups = "swdt0_clk_1_grp"; + function = "swdt0_clk"; + }; + + conf-clk { + groups = "swdt0_clk_1_grp"; + bias-pull-up; + }; + + mux-rst { + groups = "swdt0_rst_1_grp"; + function = "swdt0_rst"; + }; + + conf-rst { + groups = "swdt0_rst_1_grp"; + bias-disable; + slew-rate = ; + }; + }; + + pinctrl_ttc0_default: ttc0-default { + mux-clk { + groups = "ttc0_clk_0_grp"; + function = "ttc0_clk"; + }; + + conf-clk { + groups = "ttc0_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc0_wav_0_grp"; + function = "ttc0_wav"; + }; + + conf-wav { + groups = "ttc0_wav_0_grp"; + bias-disable; + slew-rate = ; + }; + }; + + pinctrl_ttc1_default: ttc1-default { + mux-clk { + groups = "ttc1_clk_0_grp"; + function = "ttc1_clk"; + }; + + conf-clk { + groups = "ttc1_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc1_wav_0_grp"; + function = "ttc1_wav"; + }; + + conf-wav { + groups = "ttc1_wav_0_grp"; + bias-disable; + slew-rate = ; + }; + }; + + pinctrl_ttc2_default: ttc2-default { + mux-clk { + groups = "ttc2_clk_0_grp"; + function = "ttc2_clk"; + }; + + conf-clk { + groups = "ttc2_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc2_wav_0_grp"; + function = "ttc2_wav"; + }; + + conf-wav { + groups = "ttc2_wav_0_grp"; + bias-disable; + slew-rate = ; + }; + }; + + pinctrl_ttc3_default: ttc3-default { + mux-clk { + groups = "ttc3_clk_0_grp"; + function = "ttc3_clk"; + }; + + conf-clk { + groups = "ttc3_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc3_wav_0_grp"; + function = "ttc3_wav"; + }; + + conf-wav { + groups = "ttc3_wav_0_grp"; + bias-disable; + slew-rate = ; + }; + }; }; &sdhci0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; no-1-8-v; + xlnx,mio-bank = <0>; }; &ttc0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc0_default>; }; &ttc1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc1_default>; }; &ttc2 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc2_default>; }; &ttc3 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc3_default>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; &watchdog0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_watchdog0_default>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index a53598c..f6aad41 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU100 revC * - * (C) Copyright 2016 - 2019, Xilinx, Inc. + * (C) Copyright 2016 - 2021, Xilinx, Inc. * * Michal Simek * Nathalie Chan King Choy @@ -15,6 +15,7 @@ #include #include #include +#include #include / { @@ -29,6 +30,8 @@ serial2 = &dcc; spi0 = &spi0; spi1 = &spi1; + usb0 = &usb0; + usb1 = &usb1; mmc0 = &sdhci0; mmc1 = &sdhci1; }; @@ -110,13 +113,13 @@ io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; }; - si5335a_0: clk26 { + si5335_0: si5335_0 { /* clk0_usb - u23 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; }; - si5335a_1: clk27 { + si5335_1: si5335_1 { /* clk1_dp - u23 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; @@ -160,6 +163,11 @@ &i2c1 { status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; clock-frequency = <100000>; i2c-mux@75 { /* u11 */ compatible = "nxp,pca9548"; @@ -237,10 +245,225 @@ }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_1_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_1_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_4_grp", "gpio0_5_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_4_grp", "gpio0_5_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_3_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_3_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio0_cd_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "sdio0_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_2_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_2_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_spi0_default: spi0-default { + mux { + groups = "spi0_3_grp"; + function = "spi0"; + }; + + conf { + groups = "spi0_3_grp"; + bias-disable; + slew-rate = ; + power-source = ; + }; + + mux-cs { + groups = "spi0_ss_9_grp"; + function = "spi0_ss"; + }; + + conf-cs { + groups = "spi0_ss_9_grp"; + bias-disable; + }; + + }; + + pinctrl_spi1_default: spi1-default { + mux { + groups = "spi1_0_grp"; + function = "spi1"; + }; + + conf { + groups = "spi1_0_grp"; + bias-disable; + slew-rate = ; + power-source = ; + }; + + mux-cs { + groups = "spi1_ss_0_grp"; + function = "spi1_ss"; + }; + + conf-cs { + groups = "spi1_ss_0_grp"; + bias-disable; + }; + + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_0_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO3"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO2"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_0_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO1"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO0"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_usb1_default: usb1-default { + mux { + groups = "usb1_0_grp"; + function = "usb1"; + }; + + conf { + groups = "usb1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO64", "MIO65", "MIO67"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", + "MIO72", "MIO73", "MIO74", "MIO75"; + bias-disable; + }; + }; +}; + &psgtr { status = "okay"; - /* usb3, dps */ - clocks = <&si5335a_0>, <&si5335a_1>; + /* usb3, dp */ + clocks = <&si5335_0>, <&si5335_1>; clock-names = "ref0", "ref1"; }; @@ -253,12 +476,16 @@ status = "okay"; no-1-8-v; disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; xlnx,mio-bank = <0>; }; &sdhci1 { status = "okay"; bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <0>; non-removable; disable-wp; @@ -279,16 +506,22 @@ status = "okay"; label = "LS-SPI0"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; }; &spi1 { /* High Speed connector */ status = "okay"; label = "HS-SPI1"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; bluetooth { compatible = "ti,wl1831-st"; enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; @@ -297,19 +530,38 @@ &uart1 { status = "okay"; - + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "peripheral"; + maximum-speed = "super-speed"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; +}; + +&dwc3_1 { + status = "okay"; dr_mode = "host"; + maximum-speed = "super-speed"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts new file mode 100644 index 0000000..b679839 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 Rev1.1 + * + * (C) Copyright 2016 - 2020, Xilinx, Inc. + * + * Michal Simek + */ + +#include "zynqmp-zcu102-rev1.0.dts" + +/ { + model = "ZynqMP ZCU102 Rev1.1"; + compatible = "xlnx,zynqmp-zcu102-rev1.1", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index eca6c2d..7b9a88b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevA * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include #include +#include #include / { @@ -24,10 +25,13 @@ i2c0 = &i2c0; i2c1 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -150,6 +154,8 @@ &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { @@ -192,22 +198,32 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@21 { reg = <21>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; ti,dp83867-rxctrl-strap-quirk; + /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */ }; }; &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { compatible = "ti,tca6416"; @@ -451,7 +467,6 @@ status = "disabled"; /* unreachable */ reg = <0x20>; }; - max20751@72 { /* u95 */ compatible = "maxim,max20751"; reg = <0x72>; @@ -468,6 +483,11 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* PL i2c via PCA9306 - u45 */ i2c-mux@74 { /* u34 */ @@ -642,6 +662,269 @@ }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_3_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_3_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_14_grp", "gpio0_15_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_14_grp", "gpio0_15_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-wp { + groups = "sdio1_wp_0_grp"; + function = "sdio1_wp"; + }; + + conf-wp { + groups = "sdio1_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux-sw { + function = "gpio0"; + groups = "gpio0_22_grp", "gpio0_23_grp"; + }; + + conf-sw { + groups = "gpio0_22_grp", "gpio0_23_grp"; + slew-rate = ; + power-source = ; + }; + + mux-msp { + function = "gpio0"; + groups = "gpio0_13_grp", "gpio0_38_grp"; + }; + + conf-msp { + groups = "gpio0_13_grp", "gpio0_38_grp"; + slew-rate = ; + power-source = ; + }; + + conf-pull-up { + pins = "MIO22", "MIO23"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO13", "MIO38"; + bias-disable; + }; + }; +}; + &pcie { status = "okay"; }; @@ -653,6 +936,19 @@ clock-names = "ref0", "ref1", "ref2", "ref3"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &rtc { status = "okay"; }; @@ -675,22 +971,42 @@ /* SD1 with level shifter */ &sdhci1 { status = "okay"; + /* + * 1.0 revision has level shifter and this property should be + * removed for supporting UHS mode + */ no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts index d9ad8a4..f7d718f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevB * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -22,6 +22,7 @@ ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; ti,dp83867-rxctrl-strap-quirk; + /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */ }; /* Cleanup from RevA */ /delete-node/ ethernet-phy@21; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index 5637e1c..bd8f20f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -12,6 +12,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include +#include #include / { @@ -22,10 +23,13 @@ ethernet0 = &gem3; i2c0 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -59,16 +63,52 @@ &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { status = "okay"; }; +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + &gem3 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -85,6 +125,11 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* Another connection to this bus via PL i2c via PCA9306 - u45 */ i2c-mux@74 { /* u34 */ @@ -104,7 +149,7 @@ * 512B - 768B address 0x56 * 768B - 1024B address 0x57 */ - eeprom@54 { /* u23 */ + eeprom: eeprom@54 { /* u23 */ compatible = "atmel,24c08"; reg = <0x54>; #address-cells = <1>; @@ -116,20 +161,20 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; - clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ - reg = <0x6c>; - }; + /* 8T49N287 - u182 */ }; i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; - irps5401_43: irps54012@43 { /* IRPS5401 - u175 */ - reg = <0x43>; + irps5401_43: irps5401@43 { /* IRPS5401 - u175 */ + compatible = "infineon,irps5401"; + reg = <0x43>; /* pmbus / i2c 0x13 */ }; - irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */ - reg = <0x4d>; + irps5401_44: irps5401@44 { /* IRPS5401 - u180 */ + compatible = "infineon,irps5401"; + reg = <0x44>; /* pmbus / i2c 0x14 */ }; }; @@ -173,8 +218,202 @@ }; }; -&rtc { +&pinctrl0 { status = "okay"; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + drive-strength = <12>; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; }; &psgtr { @@ -184,6 +423,23 @@ clock-names = "ref1", "ref2", "ref3"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + +&rtc { + status = "okay"; +}; + &sata { status = "okay"; /* SATA OOB timing settings */ @@ -203,22 +459,38 @@ &sdhci1 { status = "okay"; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; disable-wp; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts index 7f2e328..96feaad 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2020, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -12,6 +12,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include +#include #include / { @@ -22,10 +23,13 @@ ethernet0 = &gem3; i2c0 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -64,6 +68,8 @@ &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { @@ -106,6 +112,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -122,6 +130,11 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { compatible = "ti,tca6416"; @@ -172,9 +185,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; - clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ - reg = <0x6c>; - }; + /* 8T49N287 - u182 */ }; i2c@2 { @@ -219,6 +230,211 @@ }; }; +&pinctrl0 { + status = "okay"; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + drive-strength = <12>; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; +}; + +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; + clock-names = "ref1", "ref2", "ref3"; +}; + &qspi { status = "okay"; flash@0 { @@ -226,6 +442,9 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; }; @@ -233,13 +452,6 @@ status = "okay"; }; -&psgtr { - status = "okay"; - /* nc, sata, usb3, dp */ - clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; - clock-names = "ref1", "ref2", "ref3"; -}; - &sata { status = "okay"; /* SATA OOB timing settings */ @@ -259,22 +471,38 @@ &sdhci1 { status = "okay"; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; disable-wp; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index eff7c64..20b7c75 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU106 * - * (C) Copyright 2016 - 2019, Xilinx, Inc. + * (C) Copyright 2016 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include #include +#include #include / { @@ -24,10 +25,13 @@ i2c0 = &i2c0; i2c1 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -150,24 +154,14 @@ &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { status = "okay"; }; -&zynqmp_dpdma { - status = "okay"; -}; - -&zynqmp_dpsub { - status = "okay"; - phy-names = "dp-phy0", "dp-phy1"; - phys = <&psgtr 1 PHY_TYPE_DP 0 3>, - <&psgtr 0 PHY_TYPE_DP 1 3>; -}; - -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; @@ -204,6 +198,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -215,11 +211,18 @@ &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { compatible = "ti,tca6416"; @@ -478,6 +481,11 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* PL i2c via PCA9306 - u45 */ i2c-mux@74 { /* u34 */ @@ -652,6 +660,269 @@ }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_3_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_3_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_14_grp", "gpio0_15_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_14_grp", "gpio0_15_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-wp { + groups = "sdio1_wp_0_grp"; + function = "sdio1_wp"; + }; + + conf-wp { + groups = "sdio1_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux { + function = "gpio0"; + groups = "gpio0_22_grp", "gpio0_23_grp"; + }; + + conf { + groups = "gpio0_22_grp", "gpio0_23_grp"; + slew-rate = ; + power-source = ; + }; + + mux-msp { + function = "gpio0"; + groups = "gpio0_13_grp", "gpio0_38_grp"; + }; + + conf-msp { + groups = "gpio0_13_grp", "gpio0_38_grp"; + slew-rate = ; + power-source = ; + }; + + conf-pull-up { + pins = "MIO22"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO13", "MIO23", "MIO38"; + bias-disable; + }; + }; +}; + &psgtr { status = "okay"; /* nc, sata, usb3, dp */ @@ -659,6 +930,19 @@ clock-names = "ref1", "ref2", "ref3"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &rtc { status = "okay"; }; @@ -681,24 +965,54 @@ /* SD1 with level shifter */ &sdhci1 { status = "okay"; + /* + * This property should be removed for supporting UHS mode + */ no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index d4b68f0..e36df6a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU111 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek */ @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include #include +#include #include / { @@ -24,9 +25,12 @@ i2c0 = &i2c0; i2c1 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &dcc; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -166,6 +170,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -177,11 +183,18 @@ &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u22: gpio@20 { compatible = "ti,tca6416"; @@ -326,13 +339,16 @@ #address-cells = <1>; #size-cells = <0>; reg = <2>; - irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */ + irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */ + compatible = "infineon,irps5401"; reg = <0x43>; }; - irps5401_44: irps54012@44 { /* IRPS5401 - u55 */ + irps5401_44: irps5401@44 { /* IRPS5401 - u55 */ + compatible = "infineon,irps5401"; reg = <0x44>; }; - irps5401_45: irps54012@45 { /* IRPS5401 - u57 */ + irps5401_45: irps5401@45 { /* IRPS5401 - u57 */ + compatible = "infineon,irps5401"; reg = <0x45>; }; /* u68 IR38064 +0 */ @@ -354,6 +370,11 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; i2c-mux@74 { /* u26 */ compatible = "nxp,pca9548"; @@ -455,9 +476,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - si5382: clock-generator@69 { /* SI5382 - u48 */ - reg = <0x69>; - }; + /* SI5382 - u48 */ }; i2c@5 { #address-cells = <1>; @@ -542,13 +561,230 @@ }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_3_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_3_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_14_grp", "gpio0_15_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_14_grp", "gpio0_15_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux { + function = "gpio0"; + groups = "gpio0_22_grp", "gpio0_23_grp"; + }; + + conf { + groups = "gpio0_22_grp", "gpio0_23_grp"; + slew-rate = ; + power-source = ; + }; + + mux-msp { + function = "gpio0"; + groups = "gpio0_13_grp", "gpio0_38_grp"; + }; + + conf-msp { + groups = "gpio0_13_grp", "gpio0_38_grp"; + slew-rate = ; + power-source = ; + }; + + conf-pull-up { + pins = "MIO22"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO13", "MIO23", "MIO38"; + bias-disable; + }; + }; +}; + &psgtr { status = "okay"; - /* nc, sata, usb3, dp */ - clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>; + /* nc, dp, usb3, sata */ + clocks = <&si5341 0 0>, <&si5341 0 2>, <&si5341 0 3>; clock-names = "ref1", "ref2", "ref3"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &rtc { status = "okay"; }; @@ -565,24 +801,42 @@ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; phy-names = "sata-phy"; - phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; + phys = <&psgtr 3 PHY_TYPE_SATA 1 3>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + disable-wp; + /* + * This property should be removed for supporting UHS mode + */ no-1-8-v; xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &zynqmp_dpdma { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 28dccb8..74e6644 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP * - * (C) Copyright 2014 - 2019, Xilinx, Inc. + * (C) Copyright 2014 - 2021, Xilinx, Inc. * * Michal Simek * @@ -156,21 +156,6 @@ mbox-names = "tx", "rx"; }; - zynqmp_clk: clock-controller { - #clock-cells = <1>; - compatible = "xlnx,zynqmp-clk"; - clocks = <&pss_ref_clk>, - <&video_clk>, - <&pss_alt_ref_clk>, - <&aux_ref_clk>, - <>_crx_ref_clk>; - clock-names = "pss_ref_clk", - "video_clk", - "pss_alt_ref_clk", - "aux_ref_clk", - "gt_crx_ref_clk"; - }; - nvmem_firmware { compatible = "xlnx,zynqmp-nvmem-fw"; #address-cells = <1>; @@ -193,6 +178,11 @@ compatible = "xlnx,zynqmp-reset"; #reset-cells = <1>; }; + + pinctrl0: pinctrl { + compatible = "xlnx,zynqmp-pinctrl"; + status = "disabled"; + }; }; }; @@ -245,6 +235,7 @@ cci: cci@fd6e0000 { compatible = "arm,cci-400"; + status = "disabled"; reg = <0x0 0xfd6e0000 0x0 0x9000>; ranges = <0x0 0x0 0xfd6e0000 0x10000>; #address-cells = <1>; @@ -630,6 +621,8 @@ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; + #stream-id-cells = <1>; + iommus = <&smmu 0x4d0>; power-domains = <&zynqmp_firmware PD_PCIE>; pcie_intc: legacy-interrupt-controller { interrupt-controller; @@ -670,7 +663,7 @@ interrupt-parent = <&gic>; interrupts = <0 26 4>, <0 27 4>; interrupt-names = "alarm", "sec"; - calibration = <0x8000>; + calibration = <0x7FFF>; }; sata: ahci@fd0c0000 { @@ -680,6 +673,7 @@ interrupt-parent = <&gic>; interrupts = <0 133 4>; power-domains = <&zynqmp_firmware PD_SATA>; + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; #stream-id-cells = <4>; iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; @@ -792,7 +786,7 @@ }; uart0: serial@ff000000 { - compatible = "cdns,uart-r1p12", "xlnx,xuartps"; + compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 21 4>; @@ -802,7 +796,7 @@ }; uart1: serial@ff010000 { - compatible = "cdns,uart-r1p12", "xlnx,xuartps"; + compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 22 4>; @@ -811,24 +805,58 @@ power-domains = <&zynqmp_firmware PD_UART_1>; }; - usb0: usb@fe200000 { - compatible = "snps,dwc3"; + usb0: usb@ff9d0000 { + #address-cells = <2>; + #size-cells = <2>; status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 65 4>; - reg = <0x0 0xfe200000 0x0 0x40000>; - clock-names = "clk_xin", "clk_ahb"; + compatible = "xlnx,zynqmp-dwc3"; + reg = <0x0 0xff9d0000 0x0 0x100>; + clock-names = "bus_clk", "ref_clk"; power-domains = <&zynqmp_firmware PD_USB_0>; + resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>, + <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>, + <&zynqmp_reset ZYNQMP_RESET_USB0_APB>; + reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; + ranges; + + dwc3_0: usb@fe200000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe200000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupt-names = "dwc_usb3", "otg"; + interrupts = <0 65 4>, <0 69 4>; + #stream-id-cells = <1>; + iommus = <&smmu 0x860>; + snps,quirk-frame-length-adjustment = <0x20>; + /* dma-coherent; */ + }; }; - usb1: usb@fe300000 { - compatible = "snps,dwc3"; + usb1: usb@ff9e0000 { + #address-cells = <2>; + #size-cells = <2>; status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 70 4>; - reg = <0x0 0xfe300000 0x0 0x40000>; - clock-names = "clk_xin", "clk_ahb"; + compatible = "xlnx,zynqmp-dwc3"; + reg = <0x0 0xff9e0000 0x0 0x100>; + clock-names = "bus_clk", "ref_clk"; power-domains = <&zynqmp_firmware PD_USB_1>; + resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>, + <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>, + <&zynqmp_reset ZYNQMP_RESET_USB1_APB>; + reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; + ranges; + + dwc3_1: usb@fe300000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe300000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupt-names = "dwc_usb3", "otg"; + interrupts = <0 70 4>, <0 74 4>; + #stream-id-cells = <1>; + iommus = <&smmu 0x861>; + snps,quirk-frame-length-adjustment = <0x20>; + /* dma-coherent; */ + }; }; watchdog0: watchdog@fd4d0000 { @@ -837,7 +865,8 @@ interrupt-parent = <&gic>; interrupts = <0 113 1>; reg = <0x0 0xfd4d0000 0x0 0x1000>; - timeout-sec = <10>; + timeout-sec = <60>; + reset-on-timeout; }; lpd_watchdog: watchdog@ff150000 { diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c index 796fbb0..3d208d6 100644 --- a/drivers/watchdog/mtk_wdt.c +++ b/drivers/watchdog/mtk_wdt.c @@ -9,9 +9,9 @@ * Based on sunxi_wdt.c */ -#include -#include -#include +#include +#include +#include #include #include #include diff --git a/include/dt-bindings/power/imx8mm-power.h b/include/dt-bindings/power/imx8mm-power.h index fc9c2e1..648938f 100644 --- a/include/dt-bindings/power/imx8mm-power.h +++ b/include/dt-bindings/power/imx8mm-power.h @@ -19,4 +19,13 @@ #define IMX8MM_POWER_DOMAIN_DISPMIX 10 #define IMX8MM_POWER_DOMAIN_MIPI 11 +#define IMX8MM_VPUBLK_PD_G1 0 +#define IMX8MM_VPUBLK_PD_G2 1 +#define IMX8MM_VPUBLK_PD_H1 2 + +#define IMX8MM_DISPBLK_PD_CSI_BRIDGE 0 +#define IMX8MM_DISPBLK_PD_LCDIF 1 +#define IMX8MM_DISPBLK_PD_MIPI_DSI 2 +#define IMX8MM_DISPBLK_PD_MIPI_CSI 3 + #endif diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h similarity index 100% rename from include/dt-bindings/reset-controller/mt2712-resets.h rename to include/dt-bindings/reset/mt2712-resets.h diff --git a/include/dt-bindings/reset/mt8173-resets.h b/include/dt-bindings/reset/mt8173-resets.h index ba8636e..6a60c7c 100644 --- a/include/dt-bindings/reset/mt8173-resets.h +++ b/include/dt-bindings/reset/mt8173-resets.h @@ -27,6 +27,8 @@ #define MT8173_INFRA_GCE_FAXI_RST 40 #define MT8173_INFRA_MMIOMMURST 47 +/* MMSYS resets */ +#define MT8173_MMSYS_SW0_RST_B_DISP_DSI0 25 /* PERICFG resets */ #define MT8173_PERI_UART0_SW_RST 0 diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h similarity index 98% rename from include/dt-bindings/reset-controller/mt8183-resets.h rename to include/dt-bindings/reset/mt8183-resets.h index a1bbd41..48c5d2d 100644 --- a/include/dt-bindings/reset-controller/mt8183-resets.h +++ b/include/dt-bindings/reset/mt8183-resets.h @@ -80,6 +80,9 @@ #define MT8183_INFRACFG_SW_RST_NUM 128 +/* MMSYS resets */ +#define MT8183_MMSYS_SW0_RST_B_DISP_DSI0 25 + #define MT8183_TOPRGU_MM_SW_RST 1 #define MT8183_TOPRGU_MFG_SW_RST 2 #define MT8183_TOPRGU_VENC_SW_RST 3 diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h similarity index 100% rename from include/dt-bindings/reset-controller/mt8192-resets.h rename to include/dt-bindings/reset/mt8192-resets.h