projects/linux·commit bcd11eaa

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

bcd11eaa · Linus Torvalds <[email protected]> · 2007-10-13 10:13:27 -07:00

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (27 commits)
  alim15x3: remove redundant m5229_revision check
  sc1200: fix ->dma_base equal zero handling
  cs5520: fix ->dma_base equal zero handling
  sgiioc4: add missing ->dma_base check
  cs5535: add missing ->dma_base check
  ide: remove CONFIG_IDEDMA_IVB config option
  ide: change master/slave IDENTIFY order
  ide: move ide_config_drive_speed() calls to upper layers (take 2)
  pdc202xx_new: check ide_config_drive_speed() return value
  cs5535: check ide_config_drive_speed() return value
  amd74xx/via82cxxx: check ide_config_drive_speed() return value
  au1xxx: fix au1xxx_set_pio_mode()
  icside: use ide_tune_dma()
  ide-pmac: fix PIO setup and enable autotune
  ide-pmac: use ide_tune_dma() (take 2)
  ide-pmac: remove pmac_ide_do_setfeature() (take 2)
  ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()
  ide-pmac: use __ide_wait_stat()
  ide-pmac: remove extra good status wait from pmac_ide_do_setfeature()
  ide: add __ide_wait_stat() helper
  ...
Commit
bcd11eaa222fce31d0b59cdbfdf9b8c47067f15a
Parents
c8c55bcb · 99149a48

Merge commit. Changes below are compared with the first parent: c8c55bcb.

Changes

41 files changed · +484 −989

FileStatusAddDelContent
drivers/ide/Kconfigmodified+0−16View file
drivers/ide/arm/icside.cmodified+6−39View file
drivers/ide/cris/ide-cris.cmodified+2−6View file
drivers/ide/ide-acpi.cmodified+0−1View file
drivers/ide/ide-dma.cmodified+18−10View file
drivers/ide/ide-io.cmodified+9−1View file
drivers/ide/ide-iops.cmodified+44−89View file
drivers/ide/ide-lib.cmodified+61−17View file
drivers/ide/ide-probe.cmodified+3−4View file
drivers/ide/ide.cmodified+1−1View file
drivers/ide/legacy/ide_platform.cmodified+1−1View file
drivers/ide/mips/au1xxx-ide.cmodified+6−22View file
drivers/ide/pci/aec62xx.cmodified+5−7View file
drivers/ide/pci/alim15x3.cmodified+21−37View file
drivers/ide/pci/amd74xx.cmodified+9−17View file
drivers/ide/pci/atiixp.cmodified+12−21View file
drivers/ide/pci/cmd64x.cmodified+3−6View file
drivers/ide/pci/cs5520.cmodified+11−21View file
drivers/ide/pci/cs5530.cmodified+9−41View file
drivers/ide/pci/cs5535.cmodified+17−21View file
drivers/ide/pci/hpt34x.cmodified+4−5View file
drivers/ide/pci/hpt366.cmodified+7−11View file
drivers/ide/pci/it8213.cmodified+13−21View file
drivers/ide/pci/it821x.cmodified+29−61View file
drivers/ide/pci/jmicron.cmodified+6−9View file
drivers/ide/pci/pdc202xx_new.cmodified+13−11View file
drivers/ide/pci/pdc202xx_old.cmodified+3−6View file
drivers/ide/pci/piix.cmodified+15−31View file
drivers/ide/pci/sc1200.cmodified+18−36View file
drivers/ide/pci/scc_pata.cmodified+10−18View file
drivers/ide/pci/serverworks.cmodified+3−11View file
drivers/ide/pci/sgiioc4.cmodified+12−12View file
drivers/ide/pci/siimage.cmodified+11−18View file
drivers/ide/pci/sis5513.cmodified+4−12View file
drivers/ide/pci/sl82c105.cmodified+5−18View file
drivers/ide/pci/slc90e66.cmodified+5−13View file
drivers/ide/pci/tc86c001.cmodified+4−5View file
drivers/ide/pci/triflex.cmodified+4−6View file
drivers/ide/pci/via82cxxx.cmodified+10−19View file
drivers/ide/ppc/pmac.cmodified+52−271View file
include/linux/ide.hmodified+18−17View file

Only the first 600 diff lines are shown. Download the complete patch.

drivers/ide/Kconfig

View file
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index aa0e0c9..8982c09 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -1074,22 +1074,6 @@ endif
config BLK_DEV_IDEDMA
def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-config IDEDMA_IVB
- bool "IGNORE word93 Validation BITS"
- depends on BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS
- ---help---
- There are unclear terms in ATA-4 and ATA-5 standards how certain
- hardware (an 80c ribbon) should be detected. Different interpretations
- of the standards have been released in hardware. This causes problems:
- for example, a host with Ultra Mode 4 (or higher) will not run
- in that mode with an 80c ribbon.
-
- If you are experiencing compatibility or performance problems, you
- MAY try to answer Y here. However, it does not necessarily solve
- any of your problems, it could even cause more of them.
-
- It is normally safe to answer Y; however, the default is N.
-
endif
config BLK_DEV_HD_ONLY

drivers/ide/arm/icside.c

View file
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 7912a47..bd1f5b6 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -248,7 +248,7 @@ static void icside_build_sglist(ide_drive_t *drive, struct request *rq)
* MW1 80 50 50 150 C
* MW2 70 25 25 120 C
*/
-static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode)
+static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
{
int cycle_time, use_dma_info = 0;
@@ -273,7 +273,7 @@ static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode)
cycle_time = 480;
break;
default:
- return 1;
+ return;
}
/*
@@ -287,8 +287,6 @@ static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode)
printk("%s: %s selected (peak %dMB/s)\n", drive->name,
ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
-
- return ide_config_drive_speed(drive, xfer_mode);
}
static void icside_dma_host_off(ide_drive_t *drive)
@@ -313,41 +311,10 @@ static int icside_dma_on(ide_drive_t *drive)
static int icside_dma_check(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
- int xfer_mode = 0;
-
- if (!(id->capability & 1) || !hwif->autodma)
- goto out;
-
- /*
- * Consult the list of known "bad" drives
- */
- if (__ide_dma_bad_drive(drive))
- goto out;
-
- /*
- * Enable DMA on any drive that has multiword DMA
- */
- if (id->field_valid & 2) {
- xfer_mode = ide_max_dma_mode(drive);
- goto out;
- }
-
- /*
- * Consult the list of known "good" drives
- */
- if (__ide_dma_good_drive(drive)) {
- if (id->eide_dma_time > 150)
- goto out;
- xfer_mode = XFER_MW_DMA_1;
- }
-
-out:
- if (xfer_mode == 0)
- return -1;
+ if (ide_tune_dma(drive))
+ return 0;
- return icside_set_speed(drive, xfer_mode) ? -1 : 0;
+ return -1;
}
static int icside_dma_end(ide_drive_t *drive)
@@ -464,7 +431,7 @@ static void icside_dma_init(ide_hwif_t *hwif)
hwif->dmatable_cpu = NULL;
hwif->dmatable_dma = 0;
- hwif->speedproc = icside_set_speed;
+ hwif->set_dma_mode = icside_set_dma_mode;
hwif->autodma = 1;
hwif->ide_dma_check = icside_dma_check;

drivers/ide/cris/ide-cris.c

View file
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 4bb42b3..2b4d2a0 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -716,11 +716,9 @@ static void cris_set_pio_mode(ide_drive_t *drive, const u8 pio)
}
cris_ide_set_speed(TYPE_PIO, setup, strobe, hold);
-
- (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
-static int speed_cris_ide(ide_drive_t *drive, const u8 speed)
+static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
int cyc = 0, dvs = 0, strobe = 0, hold = 0;
@@ -759,8 +757,6 @@ static int speed_cris_ide(ide_drive_t *drive, const u8 speed)
cris_ide_set_speed(TYPE_UDMA, cyc, dvs, 0);
else
cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
-
- return ide_config_drive_speed(drive, speed);
}
void __init
@@ -791,7 +787,7 @@ init_e100_ide (void)
hwif->mmio = 1;
hwif->chipset = ide_etrax100;
hwif->set_pio_mode = &cris_set_pio_mode;
- hwif->speedproc = &speed_cris_ide;
+ hwif->set_dma_mode = &cris_set_dma_mode;
hwif->ata_input_data = &cris_ide_input_data;
hwif->ata_output_data = &cris_ide_output_data;
hwif->atapi_input_bytes = &cris_atapi_input_bytes;

drivers/ide/ide-acpi.c

View file
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 6bff81a..1d5f682 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -649,7 +649,6 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on)
if (!on)
acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D3);
}
-EXPORT_SYMBOL_GPL(ide_acpi_set_state);
/**
* ide_acpi_init - initialize the ACPI link for an IDE interface

drivers/ide/ide-dma.c

View file
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 6000c08..b453211 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -169,6 +169,11 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive)
EXPORT_SYMBOL_GPL(ide_dma_intr);
+static int ide_dma_good_drive(ide_drive_t *drive)
+{
+ return ide_in_drive_list(drive->id, drive_whitelist);
+}
+
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_build_sglist - map IDE scatter gather for DMA I/O
@@ -357,7 +362,7 @@ static int config_drive_for_dma (ide_drive_t *drive)
return 0;
/* Consult the list of known "good" drives */
- if (__ide_dma_good_drive(drive))
+ if (ide_dma_good_drive(drive))
return 0;
}
@@ -639,14 +644,6 @@ int __ide_dma_bad_drive (ide_drive_t *drive)
EXPORT_SYMBOL(__ide_dma_bad_drive);
-int __ide_dma_good_drive (ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
- return ide_in_drive_list(id, drive_whitelist);
-}
-
-EXPORT_SYMBOL(__ide_dma_good_drive);
-
static const u8 xfer_mode_bases[] = {
XFER_UDMA_0,
XFER_MW_DMA_0,
@@ -746,6 +743,14 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
}
}
+ if (hwif->chipset == ide_acorn && mode == 0) {
+ /*
+ * is this correct?
+ */
+ if (ide_dma_good_drive(drive) && drive->id->eide_dma_time < 150)
+ mode = XFER_MW_DMA_1;
+ }
+
printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode);
return min(mode, req_mode);
@@ -769,7 +774,10 @@ int ide_tune_dma(ide_drive_t *drive)
if (!speed)
return 0;
- if (drive->hwif->speedproc(drive, speed))
+ if (drive->hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
+ return 0;
+
+ if (ide_set_dma_mode(drive, speed))
return 0;
return 1;

drivers/ide/ide-io.c

View file
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 9560a8f..4cece93 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -836,9 +836,17 @@ static ide_startstop_t do_special (ide_drive_t *drive)
if (set_pio_mode_abuse(drive->hwif, req_pio)) {
if (hwif->set_pio_mode)
hwif->set_pio_mode(drive, req_pio);
- } else
+ } else {
+ int keep_dma = drive->using_dma;
+
ide_set_pio(drive, req_pio);
+ if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) {
+ if (keep_dma)
+ hwif->ide_dma_on(drive);
+ }
+ }
+
return ide_stopped;
} else {
if (drive->media == ide_disk)

drivers/ide/ide-iops.c

View file
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index cf0678b..aa73883 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -473,57 +473,22 @@ int drive_is_ready (ide_drive_t *drive)
EXPORT_SYMBOL(drive_is_ready);
/*
- * Global for All, and taken from ide-pmac.c. Can be called
- * with spinlock held & IRQs disabled, so don't schedule !
- */
-int wait_for_ready (ide_drive_t *drive, int timeout)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 stat = 0;
-
- while(--timeout) {
- stat = hwif->INB(IDE_STATUS_REG);
- if (!(stat & BUSY_STAT)) {
- if (drive->ready_stat == 0)
- break;
- else if ((stat & drive->ready_stat)||(stat & ERR_STAT))
- break;
- }
- mdelay(1);
- }
- if ((stat & ERR_STAT) || timeout <= 0) {
- if (stat & ERR_STAT) {
- printk(KERN_ERR "%s: wait_for_ready, "
- "error status: %x\n", drive->name, stat);
- }
- return 1;
- }
- return 0;
-}
-
-/*
* This routine busy-waits for the drive status to be not "busy".
* It then checks the status for all of the "good" bits and none
* of the "bad" bits, and if all is okay it returns 0. All other
- * cases return 1 after invoking ide_error() -- caller should just return.
+ * cases return error -- caller may then invoke ide_error().
*
* This routine should get fixed to not hog the cpu during extra long waits..
* That could be done by busy-waiting for the first jiffy or two, and then
* setting a timer to wake up at half second intervals thereafter,
* until timeout is achieved, before timing out.
*/
-int ide_wait_stat (ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout)
+static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
{
- ide_hwif_t *hwif = HWIF(drive);
- u8 stat;
- int i;
+ ide_hwif_t *hwif = drive->hwif;
unsigned long flags;
-
- /* bail early if we've exceeded max_failures */
- if (drive->max_failures && (drive->failures > drive->max_failures)) {
- *startstop = ide_stopped;
- return 1;
- }
+ int i;
+ u8 stat;
udelay(1); /* spec allows drive 400ns to assert "BUSY" */
if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
@@ -541,8 +506,8 @@ int ide_wait_stat (ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 b
break;
local_irq_restore(flags);
- *startstop = ide_error(drive, "status timeout", stat);
- return 1;
+ *rstat = stat;
+ return -EBUSY;
}
}
local_irq_restore(flags);
@@ -556,11 +521,39 @@ int ide_wait_stat (ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 b
*/
for (i = 0; i < 10; i++) {
udelay(1);
- if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), good, bad))
+ if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), good, bad)) {
+ *rstat = stat;
return 0;
+ }
}
- *startstop = ide_error(drive, "status error", stat);
- return 1;
+ *rstat = stat;
+ return -EFAULT;
+}
+
+/*
+ * In case of error returns error value after doing "*startstop = ide_error()".
+ * The caller should return the updated value of "startstop" in this case,
+ * "startstop" is unchanged when the function returns 0.
+ */
+int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout)
+{
+ int err;
+ u8 stat;
+
+ /* bail early if we've exceeded max_failures */
+ if (drive->max_failures && (drive->failures > drive->max_failures)) {
+ *startstop = ide_stopped;
+ return 1;
+ }
+
+ err = __ide_wait_stat(drive, good, bad, timeout, &stat);
+
+ if (err) {
+ char *s = (err == -EBUSY) ? "status timeout" : "status error";
+ *startstop = ide_error(drive, s, stat);
+ }
+
+ return err;
}
EXPORT_SYMBOL(ide_wait_stat);
@@ -620,15 +613,10 @@ u8 eighty_ninty_three (ide_drive_t *drive)
/*
* FIXME:
- * - change master/slave IDENTIFY order
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
-#ifndef CONFIG_IDEDMA_IVB
if ((id->hw_config & 0x4000) || (ivb && (id->hw_config & 0x2000)))
-#else
- if (id->hw_config & 0x6000)
-#endif
return 1;
no_80w:
@@ -778,15 +766,10 @@ int ide_driveid_update (ide_drive_t *drive)
#endif
}
-/*
- * Similar to ide_wait_stat(), except it never calls ide_error internally.
- *
- * const char *msg == consider adding for verbose errors.
- */
-int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
+int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
{
- ide_hwif_t *hwif = HWIF(drive);
- int i, error = 1;
+ ide_hwif_t *hwif = drive->hwif;
+ int error;
u8 stat;
// while (HWGROUP(drive)->busy)
@@ -826,35 +809,10 @@ int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
if ((IDE_CONTROL_REG) && (drive->quirk_list == 2))
hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
- udelay(1);
- /*
- * Wait for drive to become non-BUSY
- */
- if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
- unsigned long flags, timeout;
- local_irq_set(flags);
- timeout = jiffies + WAIT_CMD;
- while ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
- if (time_after(jiffies, timeout))
- break;
- }
- local_irq_restore(flags);
- }
- /*
- * Allow status to settle, then read it again.
- * A few rare drives vastly violate the 400ns spec here,
- * so we'll wait up to 10usec for a "good" status
- * rather than expensively fail things immediately.
- * This fix courtesy of Matthew Faupel & Niccolo Rigacci.
- */
- for (i = 0; i < 10; i++) {
- udelay(1);
- if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), drive->ready_stat, BUSY_STAT|DRQ_STAT|ERR_STAT)) {
- error = 0;
- break;
- }
- }
+ error = __ide_wait_stat(drive, drive->ready_stat,
+ BUSY_STAT|DRQ_STAT|ERR_STAT,
+ WAIT_CMD, &stat);
SELECT_MASK(drive, 0);
@@ -899,9 +857,6 @@ int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
return error;
}
-EXPORT_SYMBOL(ide_config_drive_speed);
-
-
/*
* This should get invoked any time we exit the driver to
* wait for an interrupt response from a drive. handler() points

drivers/ide/ide-lib.c

View file
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index d97390c..0e2562f 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -349,7 +349,7 @@ void ide_set_pio(ide_drive_t *drive, u8 req_pio)
drive->name, host_pio, req_pio,
req_pio == 255 ? "(auto-tune)" : "", pio);
- hwif->set_pio_mode(drive, pio);
+ (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio);
}
EXPORT_SYMBOL_GPL(ide_set_pio);
@@ -378,39 +378,83 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
blk_queue_bounce_limit(drive->queue, addr);
}
+int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
+{
+ ide_hwif_t *hwif = drive->hwif;
+
+ if (hwif->set_pio_mode == NULL)
+ return -1;
+
+ /*
+ * TODO: temporary hack for some legacy host drivers that didn't
+ * set transfer mode on the device in ->set_pio_mode method...
+ */
+ if (hwif->set_dma_mode == NULL) {
+ hwif->set_pio_mode(drive, mode - XFER_PIO_0);
+ return 0;
+ }
+
+ if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
+ if (ide_config_drive_speed(drive, mode))
+ return -1;
+ hwif->set_pio_mode(drive, mode - XFER_PIO_0);
+ return 0;
+ } else {
+ hwif->set_pio_mode(drive, mode - XFER_PIO_0);
+ return ide_config_drive_speed(drive, mode);
+ }
+}
+
+int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+ ide_hwif_t *hwif = drive->hwif;
+
+ if (hwif->set_dma_mode == NULL)
+ return -1;
+
+ if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
+ if (ide_config_drive_speed(drive, mode))
+ return -1;
+ hwif->set_dma_mode(drive, mode);
+ return 0;
+ } else {
+ hwif->set_dma_mode(drive, mode);
+ return ide_config_drive_speed(drive, mode);
+ }
+}
+
+EXPORT_SYMBOL_GPL(ide_set_dma_mode);
+
/**
* ide_set_xfer_rate - set transfer rate
* @drive: drive to set
- * @speed: speed to attempt to set
+ * @rate: speed to attempt to set
*
* General helper for setting the speed of an IDE device. This
* function knows about user enforced limits from the configuration
- * which speedproc() does not. High level drivers should never
- * invoke speedproc() directly.
+ * which ->set_pio_mode/->set_dma_mode does not.
*/
-
+
int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
{
ide_hwif_t *hwif = drive->hwif;
- if (hwif->speedproc == NULL)
+ if (hwif->set_dma_mode == NULL)
return -1;
rate = ide_rate_filter(drive, rate);
- if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) {
- if (hwif->set_pio_mode)
- hwif->set_pio_mode(drive, rate - XFER_PIO_0);
+ if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5)
+ return ide_set_pio_mode(drive, rate);
- /*
- * FIXME: this is incorrect to return zero here but
- * since all users of ide_set_xfer_rate() ignore
- * the return value it is not a problem currently
- */
- return 0;
- }
+ /*
+ * TODO: transfer modes 0x00-0x07 passed from the user-space are
+ * currently handled here which needs fixing (please note that such
+ * case could happen iff the transfer mode has already been set on
+ * the device by ide-proc.c::set_xfer_rate()).
+ */
- return hwif->speedproc(drive, rate);
+ return ide_set_dma_mode(drive, rate);
}
static void ide_dump_opcode(ide_drive_t *drive)

drivers/ide/ide-probe.c

View file
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index b4c9f63..d101171 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -719,9 +719,9 @@ EXPORT_SYMBOL_GPL(ide_undecoded_slave);
*/
static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
{
- unsigned int unit;
unsigned long flags;
unsigned int irqd;
+ int unit;
if (hwif->noprobe)
return;
@@ -777,10 +777,9 @@ static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
/*
- * Second drive should only exist if first drive was found,
- * but a lot of cdrom drives are configured as single slaves.
+ * Need to probe slave device first to make it release PDIAG-.
*/
- for (unit = 0; unit < MAX_DRIVES; ++unit) {
+ for (unit = MAX_DRIVES - 1; unit >= 0; unit--) {
ide_drive_t *drive = &hwif->drives[unit];
drive->dn = (hwif->channel ? 2 : 0) + unit;
(void) probe_for_drive(drive);

drivers/ide/ide.c

View file
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index a96a8b1..5c0e407 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -397,7 +397,7 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)

This diff is incomplete. Download the complete patch.

drivers/ide/legacy/ide_platform.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/mips/au1xxx-ide.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/aec62xx.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/alim15x3.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/amd74xx.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/atiixp.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/cmd64x.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/cs5520.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/cs5530.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/cs5535.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/hpt34x.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/hpt366.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/it8213.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/it821x.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/jmicron.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/pdc202xx_new.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/pdc202xx_old.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/piix.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/sc1200.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/scc_pata.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/serverworks.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/sgiioc4.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/siimage.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/sis5513.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/sl82c105.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/slc90e66.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/tc86c001.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/triflex.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/pci/via82cxxx.c

View file

This diff is incomplete. Download the complete patch.

drivers/ide/ppc/pmac.c

View file

This diff is incomplete. Download the complete patch.

include/linux/ide.h

View file

This diff is incomplete. Download the complete patch.