Merge tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

c1fecabe · Linus Torvalds <[email protected]> · 2018-08-21 18:06:27 -07:00

Pull power supply and reset updates from Sebastian Reichel:

 - Improve support for TI bq20z75 in sbs-battery

 - Add Qualcomm PM8xxx reboot driver

 - Add cros-ec USBPD charger driver

 - Move ds2760 battery driver from w1 to power-supply and add DT support

 - Misc fixes

* tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: supply: bq27xxx: Update comments
  power: supply: max77693_charger: fix unintentional fall-through
  power: supply: mark expected switch fall-throughs
  power: supply: lego_ev3_battery: fix Vce offset
  power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value
  power: supply: ds2760_battery: add devicetree probing
  power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
  w1: core: match sub-nodes of bus masters in devicetree
  dt-bindings: w1: document bindings for ds2760 battery monitor
  dt-bindings: w1: document generic onewire bindings
  power: supply: adp5061: Fix a couple off by ones
  dt-bindings: power: reset: qcom: Add resin binding
  adp5061: New driver for ADP5061 I2C battery charger
  power: generic-adc-battery: check for duplicate properties copied from iio channels
  power: generic-adc-battery: fix out-of-bounds write when copying channel properties
  power: supply: axp288_charger: Fix initial constant_charge_current value
  power: supply: ab8500: stop using getnstimeofday64()
  power: gemini-poweroff: Avoid more spurious poweroffs
  power: vexpress: fix corruption in notifier registration
  power: remove possible deadlock when unregistering power_supply
  ...

Commit: c1fecabecc352e40f99e6c5d7a74b8fcdfb38ae1
Parents: 99cc7ad4 · 5198a483

Merge commit. Changes below are compared with the first parent: 99cc7ad4.

Changes

36 files changed · +1931 −408

File	Status	Add	Del	Content
Documentation/devicetree/bindings/power/reset/qcom,pon.txt	added	+45	−0	View file
Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt	added	+26	−0	View file
Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt	modified	+8	−4	View file
Documentation/devicetree/bindings/w1/w1-gpio.txt	modified	+7	−2	View file
Documentation/devicetree/bindings/w1/w1.txt	added	+25	−0	View file
MAINTAINERS	modified	+7	−0	View file
drivers/power/reset/Kconfig	modified	+11	−0	View file
drivers/power/reset/Makefile	modified	+1	−0	View file
drivers/power/reset/gemini-poweroff.c	modified	+11	−1	View file
drivers/power/reset/qcom-pon.c	added	+91	−0	View file
drivers/power/reset/vexpress-poweroff.c	modified	+8	−4	View file
drivers/power/reset/zx-reboot.c	modified	+1	−0	View file
drivers/power/supply/Kconfig	modified	+22	−1	View file
drivers/power/supply/Makefile	modified	+2	−0	View file
drivers/power/supply/ab8500_fg.c	modified	+6	−8	View file
drivers/power/supply/adp5061.c	added	+745	−0	View file
drivers/power/supply/axp20x_usb_power.c	modified	+1	−0	View file
drivers/power/supply/axp288_charger.c	modified	+1	−1	View file
drivers/power/supply/bq27xxx_battery.c	modified	+2	−1	View file
drivers/power/supply/cros_usbpd-charger.c	added	+545	−0	View file
drivers/power/supply/ds2760_battery.c	modified	+258	−90	View file
drivers/power/supply/generic-adc-battery.c	modified	+15	−10	View file
drivers/power/supply/lego_ev3_battery.c	modified	+15	−5	View file
drivers/power/supply/max1721x_battery.c	modified	+1	−1	View file
drivers/power/supply/max77693_charger.c	modified	+1	−0	View file
drivers/power/supply/power_supply_core.c	modified	+9	−2	View file
drivers/power/supply/sbs-battery.c	modified	+54	−13	View file
drivers/power/supply/tps65217_charger.c	modified	+5	−17	View file
drivers/power/supply/wm8350_power.c	modified	+2	−1	View file
drivers/w1/slaves/Kconfig	modified	+0	−12	View file
drivers/w1/slaves/Makefile	modified	+0	−1	View file
drivers/w1/slaves/w1_ds2760.c	deleted	+0	−175	View before deletion
drivers/w1/slaves/w1_ds2760.h	deleted	+0	−59	View before deletion
drivers/w1/w1.c	modified	+3	−0	View file
include/linux/power_supply.h	modified	+1	−0	View file
include/linux/w1.h	modified	+2	−0	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/power/reset/qcom,pon.txt

View file

diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
new file mode 100644
index 0000000..651491b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
@@ -0,0 +1,45 @@
+Qualcomm PON Device
+
+The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+and resin along with the Android reboot-mode.
+
+This DT node has pwrkey and resin as sub nodes.
+
+Required Properties:
+-compatible: "qcom,pm8916-pon"
+-reg: Specifies the physical address of the pon register
+
+Optional subnode:
+-pwrkey: Specifies the subnode pwrkey and should follow the
+ qcom,pm8941-pwrkey.txt description.
+-resin: Specifies the subnode resin and should follow the
+ qcom,pm8xxx-pwrkey.txt description.
+
+The rest of the properties should follow the generic reboot-mode description
+found in reboot-mode.txt
+
+Example:
+
+	pon@800 {
+		compatible = "qcom,pm8916-pon";
+
+		reg = <0x800>;
+		mode-bootloader = <0x2>;
+		mode-recovery = <0x1>;
+
+		pwrkey {
+			compatible = "qcom,pm8941-pwrkey";
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+			linux,code = <KEY_POWER>;
+		};
+
+		resin {
+			compatible = "qcom,pm8941-resin";
+			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};

Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt

View file

diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt
new file mode 100644
index 0000000..55967a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt
@@ -0,0 +1,26 @@
+Devicetree bindings for Maxim DS2760
+====================================
+
+The ds2760 is a w1 slave device and must hence have its sub-node in DT
+under a w1 bus master node.
+
+The device exposes a power supply, so the details described in
+Documentation/devicetree/bindings/power/supply/power_supply.txt apply.
+
+Required properties:
+- compatible: must be "maxim,ds2760"
+
+Optional properties:
+- power-supplies:	Refers to one or more power supplies connected to
+			this battery.
+- maxim,pmod-enabled:	This boolean property enables the DS2760 to enter
+			sleep mode when the DQ line goes low for greater
+			than 2 seconds and leave sleep Mode when the DQ
+			line goes high.
+- maxim,cache-time-ms:	Time im milliseconds to cache the data for. When
+			this time expires, the values are read again from
+			the hardware. Defaults to 1000.
+- rated-capacity-microamp-hours:
+			The rated capacity of the battery, in mAh.
+			If not specified, the value stored in the
+			non-volatile chip memory is used.

Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt

View file

diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
index c40e892..4e78e51 100644
--- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
+++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
@@ -2,7 +2,11 @@ SBS sbs-battery
 ~~~~~~~~~~
 
 Required properties :
- - compatible : "sbs,sbs-battery"
+ - compatible: "<vendor>,<part-number>", "sbs,sbs-battery" as fallback. The
+     part number compatible string might be used in order to take care of
+     vendor specific registers.
+     Known <vendor>,<part-number>:
+       ti,bq20z75
 
 Optional properties :
  - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
@@ -14,9 +18,9 @@ Optional properties :
 
 Example:
 
-	bq20z75@b {
-		compatible = "sbs,sbs-battery";
-		reg = < 0xb >;
+	battery@b {
+		compatible = "ti,bq20z75", "sbs,sbs-battery";
+		reg = <0xb>;
 		sbs,i2c-retry-count = <2>;
 		sbs,poll-retry-count = <10>;
 		sbs,battery-detect-gpios = <&gpio-controller 122 1>;

Documentation/devicetree/bindings/w1/w1-gpio.txt

View file

diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt
index 3709190..3d6554e 100644
--- a/Documentation/devicetree/bindings/w1/w1-gpio.txt
+++ b/Documentation/devicetree/bindings/w1/w1-gpio.txt
@@ -13,10 +13,15 @@ Optional properties:
  - linux,open-drain: if specified, the data pin is considered in
 		     open-drain mode.
 
+Also refer to the generic w1.txt document.
+
 Examples:
 
 	onewire {
 		compatible = "w1-gpio";
-		gpios = <&gpio 126 0>, <&gpio 105 0>;
-	};
+		gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 
+		battery {
+			// ...
+		};
+	};

Documentation/devicetree/bindings/w1/w1.txt

View file

diff --git a/Documentation/devicetree/bindings/w1/w1.txt b/Documentation/devicetree/bindings/w1/w1.txt
new file mode 100644
index 0000000..05f26b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/w1.txt
@@ -0,0 +1,25 @@
+Generic devicetree bindings for onewire (w1) busses
+===================================================
+
+Onewire busses are described through nodes of their master bus controller.
+Slave devices are listed as sub-nodes of such master devices. For now, only
+one slave is allowed per bus master.
+
+
+Example:
+
+	charger: charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio 100 0>, <&gpio 101 0>;
+
+		battery {
+			compatible = "maxim,ds2760";
+			power-supplies = <&charger>;
+		};
+	};

MAINTAINERS

View file

diff --git a/MAINTAINERS b/MAINTAINERS
index e21e61f..24b200d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -842,6 +842,13 @@ S:	Supported
 F:	drivers/mux/adgs1408.c
 F:	Documentation/devicetree/bindings/mux/adgs1408.txt
 
+ANALOG DEVICES INC ADP5061 DRIVER
+M:	Stefan Popa <[email protected]>
+L:	[email protected]
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/power/supply/adp5061.c
+
 ANALOG DEVICES INC ADV7180 DRIVER
 M:	Lars-Peter Clausen <[email protected]>
 L:	[email protected]

drivers/power/reset/Kconfig

View file

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index df58fc8..6533aa5 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -104,6 +104,17 @@ config POWER_RESET_MSM
 	help
 	  Power off and restart support for Qualcomm boards.
 
+config POWER_RESET_QCOM_PON
+	tristate "Qualcomm power-on driver"
+	depends on ARCH_QCOM
+	depends on MFD_SPMI_PMIC
+	select REBOOT_MODE
+	help
+	  Power On support for Qualcomm boards.
+	  If you have a Qualcomm platform and need support for
+	  power-on and reboot reason, Say Y.
+	  If unsure, Say N.
+
 config POWER_RESET_OCELOT_RESET
 	bool "Microsemi Ocelot reset driver"
 	depends on MSCC_OCELOT || COMPILE_TEST

drivers/power/reset/Makefile

View file

diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 7778c74..0aebee9 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
 obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
 obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o

drivers/power/reset/gemini-poweroff.c

View file

diff --git a/drivers/power/reset/gemini-poweroff.c b/drivers/power/reset/gemini-poweroff.c
index 2ac291a..90e35c0 100644
--- a/drivers/power/reset/gemini-poweroff.c
+++ b/drivers/power/reset/gemini-poweroff.c
@@ -130,7 +130,17 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
 	val |= GEMINI_CTRL_ENABLE;
 	writel(val, gpw->base + GEMINI_PWC_CTRLREG);
 
-	/* Now that the state machine is active, clear the IRQ */
+	/* Clear the IRQ */
+	val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+	val |= GEMINI_CTRL_IRQ_CLR;
+	writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+	/* Wait for this to clear */
+	val = readl(gpw->base + GEMINI_PWC_STATREG);
+	while (val & 0x70U)
+		val = readl(gpw->base + GEMINI_PWC_STATREG);
+
+	/* Clear the IRQ again */
 	val = readl(gpw->base + GEMINI_PWC_CTRLREG);
 	val |= GEMINI_CTRL_IRQ_CLR;
 	writel(val, gpw->base + GEMINI_PWC_CTRLREG);

drivers/power/reset/qcom-pon.c

View file

diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c
new file mode 100644
index 0000000..0c4caaa
--- /dev/null
+++ b/drivers/power/reset/qcom-pon.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-18 Linaro Limited
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/reboot-mode.h>
+#include <linux/regmap.h>
+
+#define PON_SOFT_RB_SPARE		0x8f
+
+struct pm8916_pon {
+	struct device *dev;
+	struct regmap *regmap;
+	u32 baseaddr;
+	struct reboot_mode_driver reboot_mode;
+};
+
+static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
+				    unsigned int magic)
+{
+	struct pm8916_pon *pon = container_of
+			(reboot, struct pm8916_pon, reboot_mode);
+	int ret;
+
+	ret = regmap_update_bits(pon->regmap,
+				 pon->baseaddr + PON_SOFT_RB_SPARE,
+				 0xfc, magic << 2);
+	if (ret < 0)
+		dev_err(pon->dev, "update reboot mode bits failed\n");
+
+	return ret;
+}
+
+static int pm8916_pon_probe(struct platform_device *pdev)
+{
+	struct pm8916_pon *pon;
+	int error;
+
+	pon = devm_kzalloc(&pdev->dev, sizeof(*pon), GFP_KERNEL);
+	if (!pon)
+		return -ENOMEM;
+
+	pon->dev = &pdev->dev;
+
+	pon->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!pon->regmap) {
+		dev_err(&pdev->dev, "failed to locate regmap\n");
+		return -ENODEV;
+	}
+
+	error = of_property_read_u32(pdev->dev.of_node, "reg",
+				     &pon->baseaddr);
+	if (error)
+		return error;
+
+	pon->reboot_mode.dev = &pdev->dev;
+	pon->reboot_mode.write = pm8916_reboot_mode_write;
+	error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
+	if (error) {
+		dev_err(&pdev->dev, "can't register reboot mode\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, pon);
+
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static const struct of_device_id pm8916_pon_id_table[] = {
+	{ .compatible = "qcom,pm8916-pon" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
+
+static struct platform_driver pm8916_pon_driver = {
+	.probe = pm8916_pon_probe,
+	.driver = {
+		.name = "pm8916-pon",
+		.of_match_table = of_match_ptr(pm8916_pon_id_table),
+	},
+};
+module_platform_driver(pm8916_pon_driver);
+
+MODULE_DESCRIPTION("pm8916 Power On driver");
+MODULE_LICENSE("GPL v2");

drivers/power/reset/vexpress-poweroff.c

View file

diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c
index 102f95a..e9e749f 100644
--- a/drivers/power/reset/vexpress-poweroff.c
+++ b/drivers/power/reset/vexpress-poweroff.c
@@ -35,6 +35,7 @@ static void vexpress_reset_do(struct device *dev, const char *what)
 }
 
 static struct device *vexpress_power_off_device;
+static atomic_t vexpress_restart_nb_refcnt = ATOMIC_INIT(0);
 
 static void vexpress_power_off(void)
 {
@@ -99,10 +100,13 @@ static int _vexpress_register_restart_handler(struct device *dev)
 	int err;
 
 	vexpress_restart_device = dev;
-	err = register_restart_handler(&vexpress_restart_nb);
-	if (err) {
-		dev_err(dev, "cannot register restart handler (err=%d)\n", err);
-		return err;
+	if (atomic_inc_return(&vexpress_restart_nb_refcnt) == 1) {
+		err = register_restart_handler(&vexpress_restart_nb);
+		if (err) {
+			dev_err(dev, "cannot register restart handler (err=%d)\n", err);
+			atomic_dec(&vexpress_restart_nb_refcnt);
+			return err;
+		}
 	}
 	device_create_file(dev, &dev_attr_active);
 

drivers/power/reset/zx-reboot.c

View file

diff --git a/drivers/power/reset/zx-reboot.c b/drivers/power/reset/zx-reboot.c
index c03e96e..186901c 100644
--- a/drivers/power/reset/zx-reboot.c
+++ b/drivers/power/reset/zx-reboot.c
@@ -51,6 +51,7 @@ static int zx_reboot_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
 	pcu_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!pcu_base) {
 		iounmap(base);
 		WARN(1, "failed to map pcu_base address");

drivers/power/supply/Kconfig

View file

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 428b426..ff6dab0 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -75,6 +75,17 @@ config BATTERY_88PM860X
 	help
 	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
 
+config CHARGER_ADP5061
+	tristate "ADP5061 battery charger driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable support for the ADP5061 standalone battery
+	  charger.
+
+	  This driver can be built as a module. If so, the module will be
+	  called adp5061.
+
 config BATTERY_ACT8945A
 	tristate "Active-semi ACT8945A charger driver"
 	depends on MFD_ACT8945A || COMPILE_TEST
@@ -92,7 +103,7 @@ config BATTERY_CPCAP
 
 config BATTERY_DS2760
 	tristate "DS2760 battery driver (HP iPAQ & others)"
-	depends on W1 && W1_SLAVE_DS2760
+	depends on W1
 	help
 	  Say Y here to enable support for batteries with ds2760 chip.
 
@@ -624,4 +635,14 @@ config CHARGER_RT9455
 	help
 	  Say Y to enable support for Richtek RT9455 battery charger.
 
+config CHARGER_CROS_USBPD
+	tristate "ChromeOS EC based USBPD charger"
+	depends on MFD_CROS_EC
+	default n
+	help
+	  Say Y here to enable ChromeOS EC based USBPD charger
+	  driver. This driver gets various bits of information about
+	  what is connected to USB PD ports from the EC and converts
+	  that into power_supply properties.
+
 endif # POWER_SUPPLY

drivers/power/supply/Makefile

View file

diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index e83aa84..a26b402 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
 obj-$(CONFIG_TEST_POWER)	+= test_power.o
 
 obj-$(CONFIG_BATTERY_88PM860X)	+= 88pm860x_battery.o
+obj-$(CONFIG_CHARGER_ADP5061)	+= adp5061.o
 obj-$(CONFIG_BATTERY_ACT8945A)	+= act8945a_charger.o
 obj-$(CONFIG_BATTERY_AXP20X)	+= axp20x_battery.o
 obj-$(CONFIG_CHARGER_AXP20X)	+= axp20x_ac_power.o
@@ -83,3 +84,4 @@ obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
 obj-$(CONFIG_CHARGER_TPS65217)	+= tps65217_charger.o
 obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
 obj-$(CONFIG_AXP288_CHARGER)	+= axp288_charger.o
+obj-$(CONFIG_CHARGER_CROS_USBPD)	+= cros_usbpd-charger.o

drivers/power/supply/ab8500_fg.c

View file

diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index d9c6c7b..02356f9 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -379,15 +379,13 @@ static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr)
  */
 static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
 {
-	struct timespec64 ts64;
+	time64_t now = ktime_get_boottime_seconds();
 	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
 
-	getnstimeofday64(&ts64);
-
 	do {
 		avg->sum += sample - avg->samples[avg->pos];
 		avg->samples[avg->pos] = sample;
-		avg->time_stamps[avg->pos] = ts64.tv_sec;
+		avg->time_stamps[avg->pos] = now;
 		avg->pos++;
 
 		if (avg->pos == NBR_AVG_SAMPLES)
@@ -400,7 +398,7 @@ static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
 		 * Check the time stamp for each sample. If too old,
 		 * replace with latest sample
 		 */
-	} while (ts64.tv_sec - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
+	} while (now - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
 
 	avg->avg = avg->sum / avg->nbr_samples;
 
@@ -439,14 +437,14 @@ static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di)
 static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample)
 {
 	int i;
-	struct timespec64 ts64;
+	time64_t now;
 	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
 
-	getnstimeofday64(&ts64);
+	now = ktime_get_boottime_seconds();
 
 	for (i = 0; i < NBR_AVG_SAMPLES; i++) {
 		avg->samples[i] = sample;
-		avg->time_stamps[i] = ts64.tv_sec;
+		avg->time_stamps[i] = now;
 	}
 
 	avg->pos = 0;

drivers/power/supply/adp5061.c

View file

diff --git a/drivers/power/supply/adp5061.c b/drivers/power/supply/adp5061.c
new file mode 100644
index 0000000..939fd3d
--- /dev/null
+++ b/drivers/power/supply/adp5061.c
@@ -0,0 +1,745 @@
+/*
+ * ADP5061 I2C Programmable Linear Battery Charger
+ *
+ * Copyright 2018 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+/* ADP5061 registers definition */
+#define ADP5061_ID			0x00
+#define ADP5061_REV			0x01
+#define ADP5061_VINX_SET		0x02
+#define ADP5061_TERM_SET		0x03
+#define ADP5061_CHG_CURR		0x04
+#define ADP5061_VOLTAGE_TH		0x05
+#define ADP5061_TIMER_SET		0x06
+#define ADP5061_FUNC_SET_1		0x07
+#define ADP5061_FUNC_SET_2		0x08
+#define ADP5061_INT_EN			0x09
+#define ADP5061_INT_ACT			0x0A
+#define ADP5061_CHG_STATUS_1		0x0B
+#define ADP5061_CHG_STATUS_2		0x0C
+#define ADP5061_FAULT			0x0D
+#define ADP5061_BATTERY_SHORT		0x10
+#define ADP5061_IEND			0x11
+
+/* ADP5061_VINX_SET */
+#define ADP5061_VINX_SET_ILIM_MSK		GENMASK(3, 0)
+#define ADP5061_VINX_SET_ILIM_MODE(x)		(((x) & 0x0F) << 0)
+
+/* ADP5061_TERM_SET */
+#define ADP5061_TERM_SET_VTRM_MSK		GENMASK(7, 2)
+#define ADP5061_TERM_SET_VTRM_MODE(x)		(((x) & 0x3F) << 2)
+#define ADP5061_TERM_SET_CHG_VLIM_MSK		GENMASK(1, 0)
+#define ADP5061_TERM_SET_CHG_VLIM_MODE(x)	(((x) & 0x03) << 0)
+
+/* ADP5061_CHG_CURR */
+#define ADP5061_CHG_CURR_ICHG_MSK		GENMASK(6, 2)
+#define ADP5061_CHG_CURR_ICHG_MODE(x)		(((x) & 0x1F) << 2)
+#define ADP5061_CHG_CURR_ITRK_DEAD_MSK		GENMASK(1, 0)
+#define ADP5061_CHG_CURR_ITRK_DEAD_MODE(x)	(((x) & 0x03) << 0)
+
+/* ADP5061_VOLTAGE_TH */
+#define ADP5061_VOLTAGE_TH_DIS_RCH_MSK		BIT(7)
+#define ADP5061_VOLTAGE_TH_DIS_RCH_MODE(x)	(((x) & 0x01) << 7)
+#define ADP5061_VOLTAGE_TH_VRCH_MSK		GENMASK(6, 5)
+#define ADP5061_VOLTAGE_TH_VRCH_MODE(x)		(((x) & 0x03) << 5)
+#define ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK	GENMASK(4, 3)
+#define ADP5061_VOLTAGE_TH_VTRK_DEAD_MODE(x)	(((x) & 0x03) << 3)
+#define ADP5061_VOLTAGE_TH_VWEAK_MSK		GENMASK(2, 0)
+#define ADP5061_VOLTAGE_TH_VWEAK_MODE(x)	(((x) & 0x07) << 0)
+
+/* ADP5061_CHG_STATUS_1 */
+#define ADP5061_CHG_STATUS_1_VIN_OV(x)		(((x) >> 7) & 0x1)
+#define ADP5061_CHG_STATUS_1_VIN_OK(x)		(((x) >> 6) & 0x1)
+#define ADP5061_CHG_STATUS_1_VIN_ILIM(x)	(((x) >> 5) & 0x1)
+#define ADP5061_CHG_STATUS_1_THERM_LIM(x)	(((x) >> 4) & 0x1)
+#define ADP5061_CHG_STATUS_1_CHDONE(x)		(((x) >> 3) & 0x1)
+#define ADP5061_CHG_STATUS_1_CHG_STATUS(x)	(((x) >> 0) & 0x7)
+
+/* ADP5061_CHG_STATUS_2 */
+#define ADP5061_CHG_STATUS_2_THR_STATUS(x)	(((x) >> 5) & 0x7)
+#define ADP5061_CHG_STATUS_2_RCH_LIM_INFO(x)	(((x) >> 3) & 0x1)
+#define ADP5061_CHG_STATUS_2_BAT_STATUS(x)	(((x) >> 0) & 0x7)
+
+/* ADP5061_IEND */
+#define ADP5061_IEND_IEND_MSK			GENMASK(7, 5)
+#define ADP5061_IEND_IEND_MODE(x)		(((x) & 0x07) << 5)
+
+#define ADP5061_NO_BATTERY	0x01
+#define ADP5061_ICHG_MAX	1300 // mA
+
+enum adp5061_chg_status {
+	ADP5061_CHG_OFF,
+	ADP5061_CHG_TRICKLE,
+	ADP5061_CHG_FAST_CC,
+	ADP5061_CHG_FAST_CV,
+	ADP5061_CHG_COMPLETE,
+	ADP5061_CHG_LDO_MODE,
+	ADP5061_CHG_TIMER_EXP,
+	ADP5061_CHG_BAT_DET,
+};
+
+static const int adp5061_chg_type[4] = {
+	[ADP5061_CHG_OFF] = POWER_SUPPLY_CHARGE_TYPE_NONE,
+	[ADP5061_CHG_TRICKLE] = POWER_SUPPLY_CHARGE_TYPE_TRICKLE,
+	[ADP5061_CHG_FAST_CC] = POWER_SUPPLY_CHARGE_TYPE_FAST,
+	[ADP5061_CHG_FAST_CV] = POWER_SUPPLY_CHARGE_TYPE_FAST,
+};
+