Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
Merge commit. Changes below are compared with the first parent: ce8a84ef.
Changes
32 files changed · +252 −186
Only the first 600 diff lines are shown. Download the complete patch.
arch/arm/kernel/iwmmxt.S
View filediff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index 7fa3bb0..a087838 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -195,10 +195,10 @@ ENTRY(iwmmxt_task_disable)
@ enable access to CP0 and CP1
XSC(mrc p15, 0, r4, c15, c1, 0)
- XSC(orr r4, r4, #0xf)
+ XSC(orr r4, r4, #0x3)
XSC(mcr p15, 0, r4, c15, c1, 0)
PJ4(mrc p15, 0, r4, c1, c0, 2)
- PJ4(orr r4, r4, #0x3)
+ PJ4(orr r4, r4, #0xf)
PJ4(mcr p15, 0, r4, c1, c0, 2)
mov r0, #0 @ nothing to load
@@ -313,7 +313,7 @@ ENTRY(iwmmxt_task_switch)
teq r2, r3 @ next task owns it?
movne pc, lr @ no: leave Concan disabled
-1: @ flip Conan access
+1: @ flip Concan access
XSC(eor r1, r1, #0x3)
XSC(mcr p15, 0, r1, c15, c1, 0)
PJ4(eor r1, r1, #0xf)
arch/arm/mach-imx/clock-imx25.c
View filediff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
index 0fc7ba5..e63e235 100644
--- a/arch/arm/mach-imx/clock-imx25.c
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -331,6 +331,9 @@ int __init mx25_clocks_init(void)
__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
CRM_BASE + 0x64);
+ /* Clock source for gpt is ahb_div */
+ __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
+
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
arch/arm/mach-imx/mach-imx27_visstrim_m10.c
View filediff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 6707de0..6778f81 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -30,6 +30,7 @@
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
+#include <sound/tlv320aic32x4.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
.invert = 0,
};
+static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
+ .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
+ AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
+ AIC32X4_PWR_AIC32X4_LDO_ENABLE |
+ AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
+ AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
+ .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
+ AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
+ .swapdacs = false,
+};
+
static struct i2c_board_info visstrim_m10_i2c_devices[] = {
{
I2C_BOARD_INFO("pca9555", 0x20),
@@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
},
{
I2C_BOARD_INFO("tlv320aic32x4", 0x18),
+ .platform_data = &visstrim_m10_aic32x4_pdata,
}
};
arch/arm/mach-imx/mach-mx31ads.c
View filediff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 0ce4947..29ca890 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
#endif
};
-static void mxc_init_i2c(void)
+static void __init mxc_init_i2c(void)
{
i2c_register_board_info(1, mx31ads_i2c1_devices,
ARRAY_SIZE(mx31ads_i2c1_devices));
@@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = {
MX31_PIN_STXD5__STXD5,
};
-static void mxc_init_audio(void)
+static void __init mxc_init_audio(void)
{
imx31_add_imx_ssi(0, NULL);
mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
arch/arm/mach-imx/mach-mx31lilly.c
View filediff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 750368d..126913a 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
-static void lilly1131_usb_init(void)
+static void __init lilly1131_usb_init(void)
{
imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
arch/arm/mach-mmp/gplugd.c
View filediff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index c070c24..98e25d9 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -16,16 +16,18 @@
#include <mach/gpio.h>
#include <mach/pxa168.h>
#include <mach/mfp-pxa168.h>
-#include <mach/mfp-gplugd.h>
#include "common.h"
static unsigned long gplugd_pin_config[] __initdata = {
/* UART3 */
- GPIO8_UART3_SOUT,
- GPIO9_UART3_SIN,
- GPI1O_UART3_CTS,
- GPI11_UART3_RTS,
+ GPIO8_UART3_TXD,
+ GPIO9_UART3_RXD,
+ GPIO1O_UART3_CTS,
+ GPIO11_UART3_RTS,
+
+ /* USB OTG PEN */
+ GPIO18_GPIO,
/* MMC2 */
GPIO28_MMC2_CMD,
@@ -109,6 +111,12 @@ static unsigned long gplugd_pin_config[] __initdata = {
GPIO105_CI2C_SDA,
GPIO106_CI2C_SCL,
+ /* SPI NOR Flash on SSP2 */
+ GPIO107_SSP2_RXD,
+ GPIO108_SSP2_TXD,
+ GPIO110_GPIO, /* SPI_CSn */
+ GPIO111_SSP2_CLK,
+
/* Select JTAG */
GPIO109_GPIO,
@@ -154,7 +162,7 @@ static void __init select_disp_freq(void)
"frequency\n");
} else {
gpio_direction_output(35, 1);
- gpio_free(104);
+ gpio_free(35);
}
if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
@@ -162,7 +170,7 @@ static void __init select_disp_freq(void)
"frequency\n");
} else {
gpio_direction_output(85, 0);
- gpio_free(104);
+ gpio_free(85);
}
}
arch/arm/mach-mmp/include/mach/mfp-gplugd.h
View before deletiondiff --git a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
deleted file mode 100644
index b8cf38d..0000000
--- a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
- *
- * MFP definitions used in gplugD
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MFP_GPLUGD_H
-#define __MACH_MFP_GPLUGD_H
-
-#include <plat/mfp.h>
-#include <mach/mfp.h>
-
-/* UART3 */
-#define GPIO8_UART3_SOUT MFP_CFG(GPIO8, AF2)
-#define GPIO9_UART3_SIN MFP_CFG(GPIO9, AF2)
-#define GPI1O_UART3_CTS MFP_CFG(GPIO10, AF2)
-#define GPI11_UART3_RTS MFP_CFG(GPIO11, AF2)
-
-/* MMC2 */
-#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST)
-#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST)
-#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST)
-#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST)
-#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST)
-#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST)
-
-/* I2S */
-#undef GPIO114_I2S_FRM
-#undef GPIO115_I2S_BCLK
-
-#define GPIO114_I2S_FRM MFP_CFG_DRV(GPIO114, AF1, FAST)
-#define GPIO115_I2S_BCLK MFP_CFG_DRV(GPIO115, AF1, FAST)
-#define GPIO116_I2S_TXD MFP_CFG_DRV(GPIO116, AF1, FAST)
-
-/* MMC4 */
-#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST)
-#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST)
-#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST)
-#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST)
-#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST)
-#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST)
-
-/* OTG GPIO */
-#define GPIO_USB_OTG_PEN 18
-#define GPIO_USB_OIDIR 20
-
-/* Other GPIOs are 35, 84, 85 */
-#endif /* __MACH_MFP_GPLUGD_H */
arch/arm/mach-mmp/include/mach/mfp-pxa168.h
View filediff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 8c78232..92aaa3c 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -203,6 +203,10 @@
#define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3)
/* UART */
+#define GPIO8_UART3_TXD MFP_CFG(GPIO8, AF2)
+#define GPIO9_UART3_RXD MFP_CFG(GPIO9, AF2)
+#define GPIO1O_UART3_CTS MFP_CFG(GPIO10, AF2)
+#define GPIO11_UART3_RTS MFP_CFG(GPIO11, AF2)
#define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2)
#define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2)
#define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST)
@@ -232,6 +236,22 @@
#define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1)
#define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1)
+/* MMC2 */
+#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST)
+#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST)
+#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST)
+#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST)
+#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST)
+#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST)
+
+/* MMC4 */
+#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST)
+#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST)
+#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST)
+#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST)
+#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST)
+#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST)
+
/* LCD */
#define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1)
#define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1)
@@ -269,11 +289,12 @@
#define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1)
/* I2S */
-#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6)
-#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1)
-#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1)
-#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2)
-#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2)
+#define GPIO113_I2S_MCLK MFP_CFG(GPIO113, AF6)
+#define GPIO114_I2S_FRM MFP_CFG(GPIO114, AF1)
+#define GPIO115_I2S_BCLK MFP_CFG(GPIO115, AF1)
+#define GPIO116_I2S_RXD MFP_CFG(GPIO116, AF2)
+#define GPIO116_I2S_TXD MFP_CFG(GPIO116, AF1)
+#define GPIO117_I2S_TXD MFP_CFG(GPIO117, AF2)
/* PWM */
#define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1)
@@ -324,4 +345,10 @@
#define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5)
#define GPIO103_RX_DV MFP_CFG(GPIO103, AF5)
+/* SSP2 */
+#define GPIO107_SSP2_RXD MFP_CFG(GPIO107, AF4)
+#define GPIO108_SSP2_TXD MFP_CFG(GPIO108, AF4)
+#define GPIO111_SSP2_CLK MFP_CFG(GPIO111, AF4)
+#define GPIO112_SSP2_FRM MFP_CFG(GPIO112, AF4)
+
#endif /* __ASM_MACH_MFP_PXA168_H */
arch/arm/mach-mmp/time.c
View filediff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 99833b9..4e91ee6 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -51,12 +51,12 @@ static inline uint32_t timer_read(void)
{
int delay = 100;
- __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
+ __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1));
while (delay--)
cpu_relax();
- return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
+ return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
}
unsigned long long notrace sched_clock(void)
@@ -75,28 +75,51 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *c = dev_id;
- /* disable and clear pending interrupt status */
- __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
- __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
+ /*
+ * Clear pending interrupt status.
+ */
+ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+
+ /*
+ * Disable timer 0.
+ */
+ __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+
c->event_handler(c);
+
return IRQ_HANDLED;
}
static int timer_set_next_event(unsigned long delta,
struct clock_event_device *dev)
{
- unsigned long flags, next;
+ unsigned long flags;
local_irq_save(flags);
- /* clear pending interrupt status and enable */
+ /*
+ * Disable timer 0.
+ */
+ __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+
+ /*
+ * Clear and enable timer match 0 interrupt.
+ */
__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
- next = timer_read() + delta;
- __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+ /*
+ * Setup new clockevent timer value.
+ */
+ __raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+
+ /*
+ * Enable timer 0.
+ */
+ __raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER);
local_irq_restore(flags);
+
return 0;
}
@@ -145,23 +168,26 @@ static struct clocksource cksrc = {
static void __init timer_config(void)
{
uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
- uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
- uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
- __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */
- ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3);
+ ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
+ (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
- /* free-running mode */
- __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
+ /* set timer 0 to periodic mode, and timer 1 to free-running mode */
+ __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR);
- __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
+ __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */
__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */
__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
- /* enable timer counter */
- __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */
+ __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1)); /* clear status */
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1));
+
+ /* enable timer 1 counter */
+ __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER);
}
static struct irqaction timer_irq = {
arch/arm/mach-mx5/board-cpuimx51.c
View filediff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 7c893fa..68934ea 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
- .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+ .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
arch/arm/mach-mx5/board-mx51_babbage.c
View filediff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index e400b09..11b0ff6 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -369,7 +369,7 @@ static void __init mx51_babbage_init(void)
ARRAY_SIZE(mx51babbage_pads));
imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_imx_uart(1, &uart_pdata);
+ imx51_add_imx_uart(1, NULL);
imx51_add_imx_uart(2, &uart_pdata);
babbage_fec_reset();
arch/arm/mach-mx5/board-mx51_efikamx.c
View filediff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index f70700d..551daf8 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void)
gpio_request(EFIKAMX_PCBID2, "pcbid2");
gpio_direction_input(EFIKAMX_PCBID2);
- id = gpio_get_value(EFIKAMX_PCBID0);
- id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
- id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
+ id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
+ id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
+ id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
switch (id) {
case 7:
arch/arm/mach-mx5/board-mx51_efikasb.c
View filediff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 2e4d9d3..8a9bca2 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -156,23 +156,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = {
{
.code = KEY_POWER,
.gpio = EFIKASB_PWRKEY,
- .type = EV_PWR,
+ .type = EV_KEY,
.desc = "Power Button",
.wakeup = 1,
- .debounce_interval = 10, /* ms */
+ .active_low = 1,
},
{
.code = SW_LID,
.gpio = EFIKASB_LID,
.type = EV_SW,
.desc = "Lid Switch",
+ .active_low = 1,
},
{
- /* SW_RFKILLALL vs KEY_RFKILL ? */
- .code = SW_RFKILL_ALL,
+ .code = KEY_RFKILL,
.gpio = EFIKASB_RFKILL,
- .type = EV_SW,
+ .type = EV_KEY,
.desc = "rfkill",
+ .active_low = 1,
},
};
@@ -224,8 +225,8 @@ static void __init mx51_efikasb_board_id(void)
gpio_request(EFIKASB_PCBID1, "pcb id1");
gpio_direction_input(EFIKASB_PCBID1);
- id = gpio_get_value(EFIKASB_PCBID0);
- id |= gpio_get_value(EFIKASB_PCBID1) << 1;
+ id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
+ id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
switch (id) {
default:
arch/arm/mach-mx5/clock-mx51-mx53.c
View filediff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 7f20308..f7bf996 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk)
int i = 0;
pllbase = _get_pll_base(clk);
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ if (reg & MXC_PLL_DP_CTL_UPEN)
+ return 0;
+
+ reg |= MXC_PLL_DP_CTL_UPEN;
__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
/* Wait for lock */
arch/arm/mach-mx5/mx51_efika.c
View filediff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 4435e03..c920945 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
mdelay(10);
- return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
+ return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
}
static struct mxc_usbh_platform_data usbh1_config = {
arch/arm/mach-omap2/Kconfig
View filediff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4ae6257..57b66d5 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -7,7 +7,6 @@ config ARCH_OMAP2PLUS_TYPICAL
default y
select AEABI
select REGULATOR
- select PM
select PM_RUNTIME
select VFP
select NEON if ARCH_OMAP3 || ARCH_OMAP4
arch/arm/mach-omap2/board-am3517crane.c
View filediff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 5f2b55f..933e935 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -45,8 +45,6 @@ static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
-#else
-#define board_mux NULL
#endif
static void __init am3517_crane_init_early(void)
arch/arm/mach-omap2/board-omap3beagle.c
View filediff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 32f5f89..3ae16b4 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -491,23 +491,22 @@ static void __init beagle_opp_init(void)
/* Custom OPP enabled for all xM versions */
if (cpu_is_omap3630()) {
- struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
- struct omap_hwmod *dh = omap_hwmod_lookup("iva");
- struct device *dev;
+ struct device *mpu_dev, *iva_dev;
- if (!mh || !dh) {
+ mpu_dev = omap2_get_mpuss_device();
+ iva_dev = omap2_get_iva_device();
+
+ if (!mpu_dev || !iva_dev) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
- __func__, mh, dh);
+ __func__, mpu_dev, iva_dev);
return;
}
/* Enable MPU 1GHz and lower opps */
- dev = &mh->od->pdev.dev;
- r = opp_enable(dev, 800000000);
+ r = opp_enable(mpu_dev, 800000000);
/* TODO: MPU 1GHz needs SR and ABB */
/* Enable IVA 800MHz and lower opps */
- dev = &dh->od->pdev.dev;
- r |= opp_enable(dev, 660000000);
+ r |= opp_enable(iva_dev, 660000000);
/* TODO: DSP 800MHz needs SR and ABB */
if (r) {
pr_err("%s: failed to enable higher opp %d\n",
@@ -516,10 +515,8 @@ static void __init beagle_opp_init(void)
* Cleanup - disable the higher freqs - we dont care
* about the results
*/
- dev = &mh->od->pdev.dev;
- opp_disable(dev, 800000000);
- dev = &dh->od->pdev.dev;
- opp_disable(dev, 660000000);
+ opp_disable(mpu_dev, 800000000);
+ opp_disable(iva_dev, 660000000);
This diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/cminst44xx.h
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/mux.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/smartreflex.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/timer.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/twl-common.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-sa1100/pci-nanoengine.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/plat-mxc/include/mach/debug-macro.S
View fileThis diff is incomplete. Download the complete patch.
arch/arm/plat-mxc/include/mach/iomux-mx53.h
View fileThis diff is incomplete. Download the complete patch.
arch/arm/plat-omap/Kconfig
View fileThis diff is incomplete. Download the complete patch.
arch/arm/plat-omap/include/plat/dma.h
View fileThis diff is incomplete. Download the complete patch.
arch/arm/plat-omap/include/plat/irqs.h
View fileThis diff is incomplete. Download the complete patch.
arch/arm/plat-omap/include/plat/serial.h
View fileThis diff is incomplete. Download the complete patch.
arch/arm/plat-omap/iovmm.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/tools/mach-types
View fileThis diff is incomplete. Download the complete patch.