diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 6770044..11e40d2 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -293,6 +293,13 @@ properties: PD negotiation till BC1.2 detection completes. default: 0 + pd-revision: + description: Specifies the maximum USB PD revision and version supported by + the connector. This property is specified in the following order; + . + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 4 + dependencies: sink-vdos-v1: [ sink-vdos ] sink-vdos: [ sink-vdos-v1 ] diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index a86bcd9..7f22f9c 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -113,27 +113,27 @@ examples: - | #include vhub: usb-vhub@1e6a0000 { - compatible = "aspeed,ast2500-usb-vhub"; - reg = <0x1e6a0000 0x300>; - interrupts = <5>; - clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; - aspeed,vhub-downstream-ports = <5>; - aspeed,vhub-generic-endpoints = <15>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2ad_default>; - - vhub-vendor-id = <0x1d6b>; - vhub-product-id = <0x0107>; - vhub-device-revision = <0x0100>; - vhub-strings { - #address-cells = <1>; - #size-cells = <0>; - - string@409 { - reg = <0x409>; - manufacturer = "ASPEED"; - product = "USB Virtual Hub"; - serial-number = "0000"; - }; + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + + vhub-vendor-id = <0x1d6b>; + vhub-product-id = <0x0107>; + vhub-device-revision = <0x0100>; + vhub-strings { + #address-cells = <1>; + #size-cells = <0>; + + string@409 { + reg = <0x409>; + manufacturer = "ASPEED"; + product = "USB Virtual Hub"; + serial-number = "0000"; }; + }; }; diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml index 9e561fe..f9375c6 100644 --- a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml +++ b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml @@ -41,10 +41,10 @@ additionalProperties: false examples: - | - usb@f0b02000 { - compatible = "brcm,bdc-udc-v2"; - reg = <0xf0b02000 0xfc4>; - interrupts = <0x0 0x60 0x0>; - phys = <&usbphy_0 0x0>; - clocks = <&sw_usbd>; - }; + usb@f0b02000 { + compatible = "brcm,bdc-udc-v2"; + reg = <0xf0b02000 0xfc4>; + interrupts = <0x0 0x60 0x0>; + phys = <&usbphy_0 0x0>; + clocks = <&sw_usbd>; + }; diff --git a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml index e44e88d..1033b7a 100644 --- a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml +++ b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml @@ -56,21 +56,21 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb4b4,6504"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - vdd-supply = <®_1v2_usb>; - vdd2-supply = <®_3v3_usb>; + compatible = "usb4b4,6504"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb4b4,6506"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - vdd-supply = <®_1v2_usb>; - vdd2-supply = <®_3v3_usb>; + compatible = "usb4b4,6506"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; }; }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index a5f2e34..e83d30a 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -192,7 +192,7 @@ unevaluatedProperties: false examples: - | - usb@101c0000 { + usb@101c0000 { compatible = "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x10180000 0x40000>; interrupts = <18>; @@ -200,6 +200,6 @@ examples: clock-names = "otg"; phys = <&usbphy>; phy-names = "usb2-phy"; - }; + }; ... diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index 8b25b9a..e3a7df9 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -87,21 +87,21 @@ examples: #size-cells = <0>; typec-mux@42 { - compatible = "fcs,fsa4480"; - reg = <0x42>; + compatible = "fcs,fsa4480"; + reg = <0x42>; - interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; - vcc-supply = <&vreg_bob>; + vcc-supply = <&vreg_bob>; - mode-switch; - orientation-switch; + mode-switch; + orientation-switch; - port { - fsa4480_ept: endpoint { - remote-endpoint = <&typec_controller>; + port { + fsa4480_ept: endpoint { + remote-endpoint = <&typec_controller>; + }; }; - }; }; }; ... diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index 8a5f837..e588514 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -20,6 +20,7 @@ properties: items: - enum: - nxp,cbdtu02043 + - onnn,fsusb42 - onnn,fsusb43l10x - pericom,pi3usb102 - ti,tmuxhs4212 diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml index d3511f4..1a75544 100644 --- a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml @@ -58,20 +58,20 @@ examples: #define KEEM_BAY_A53_AUX_USB_SUSPEND usb { - compatible = "intel,keembay-dwc3"; - clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>; - clock-names = "async_master", "ref", "alt_ref", "suspend"; - ranges; - #address-cells = <1>; - #size-cells = <1>; - - usb@34000000 { - compatible = "snps,dwc3"; - reg = <0x34000000 0x10000>; - interrupts = ; - dr_mode = "peripheral"; - }; + compatible = "intel,keembay-dwc3"; + clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>; + clock-names = "async_master", "ref", "alt_ref", "suspend"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + usb@34000000 { + compatible = "snps,dwc3"; + reg = <0x34000000 0x10000>; + interrupts = ; + dr_mode = "peripheral"; + }; }; diff --git a/Documentation/devicetree/bindings/usb/ite,it5205.yaml b/Documentation/devicetree/bindings/usb/ite,it5205.yaml index 36ec425..8897107 100644 --- a/Documentation/devicetree/bindings/usb/ite,it5205.yaml +++ b/Documentation/devicetree/bindings/usb/ite,it5205.yaml @@ -54,19 +54,19 @@ examples: #size-cells = <0>; typec-mux@48 { - compatible = "ite,it5205"; - reg = <0x48>; + compatible = "ite,it5205"; + reg = <0x48>; - mode-switch; - orientation-switch; + mode-switch; + orientation-switch; - vcc-supply = <&mt6359_vibr_ldo_reg>; + vcc-supply = <&mt6359_vibr_ldo_reg>; - port { - it5205_usbss_sbu: endpoint { - remote-endpoint = <&typec_controller>; + port { + it5205_usbss_sbu: endpoint { + remote-endpoint = <&typec_controller>; + }; }; - }; }; }; ... diff --git a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml index 20b6222..3de4dc4 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml @@ -13,8 +13,12 @@ description: Maxim TCPCI Type-C PD controller properties: compatible: - enum: - - maxim,max33359 + oneOf: + - enum: + - maxim,max33359 + - items: + - const: maxim,max77759-tcpci + - const: maxim,max33359 reg: maxItems: 1 @@ -70,6 +74,7 @@ examples: PDO_FIXED_DUAL_ROLE) PDO_FIXED(9000, 2000, 0)>; sink-bc12-completion-time-ms = <500>; + pd-revision = /bits/ 8 <0x03 0x01 0x01 0x08>; }; }; }; diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml index 8e0f4ec..6edb1fc 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml @@ -50,18 +50,18 @@ additionalProperties: false examples: - | - #include - #include - spi { - #address-cells = <1>; - #size-cells = <0>; + #include + #include + spi { + #address-cells = <1>; + #size-cells = <0>; - udc@0 { - compatible = "maxim,max3420-udc"; - reg = <0>; - interrupt-parent = <&gpio>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "udc", "vbus"; - spi-max-frequency = <12500000>; - }; - }; + udc@0 { + compatible = "maxim,max3420-udc"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "udc", "vbus"; + spi-max-frequency = <12500000>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml index 9029661..c0e313c 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml @@ -189,7 +189,7 @@ examples: #size-cells = <0>; ethernet@1 { - compatible = "usb955,9ff"; - reg = <1>; + compatible = "usb955,9ff"; + reg = <1>; }; }; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 2622a1f..a2b3cf6 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -27,6 +27,7 @@ properties: - qcom,msm8998-dwc3 - qcom,qcm2290-dwc3 - qcom,qcs404-dwc3 + - qcom,qcs615-dwc3 - qcom,qcs8300-dwc3 - qcom,qdu1000-dwc3 - qcom,sa8775p-dwc3 @@ -342,6 +343,7 @@ allOf: contains: enum: - qcom,qcm2290-dwc3 + - qcom,qcs615-dwc3 - qcom,sar2130p-dwc3 - qcom,sc8180x-dwc3 - qcom,sc8180x-dwc3-mp @@ -454,8 +456,10 @@ allOf: then: properties: interrupts: + minItems: 3 maxItems: 4 interrupt-names: + minItems: 3 items: - const: pwr_event - const: dp_hs_phy_irq @@ -470,6 +474,7 @@ allOf: - qcom,ipq4019-dwc3 - qcom,ipq8064-dwc3 - qcom,msm8994-dwc3 + - qcom,qcs615-dwc3 - qcom,qcs8300-dwc3 - qcom,qdu1000-dwc3 - qcom,sa8775p-dwc3 diff --git a/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml b/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml index ff62560..b87e139 100644 --- a/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml @@ -104,26 +104,26 @@ examples: #size-cells = <1>; usb3host: usb@85060000 { - compatible = "renesas,r9a09g011-xhci", - "renesas,rzv2m-xhci"; - reg = <0x85060000 0x2000>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, - <&cpg CPG_MOD R9A09G011_USB_PCLK>; - clock-names = "axi", "reg"; - power-domains = <&cpg>; - resets = <&cpg R9A09G011_USB_ARESETN_H>; + compatible = "renesas,r9a09g011-xhci", + "renesas,rzv2m-xhci"; + reg = <0x85060000 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_ARESETN_H>; }; usb3peri: usb3peri@85070000 { - compatible = "renesas,r9a09g011-usb3-peri", - "renesas,rzv2m-usb3-peri"; - reg = <0x85070000 0x400>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, - <&cpg CPG_MOD R9A09G011_USB_PCLK>; - clock-names = "axi", "reg"; - power-domains = <&cpg>; - resets = <&cpg R9A09G011_USB_ARESETN_P>; + compatible = "renesas,r9a09g011-usb3-peri", + "renesas,rzv2m-usb3-peri"; + reg = <0x85070000 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_ARESETN_P>; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index b2b811a..4e56e4f 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -132,19 +132,19 @@ examples: usb-role-switch; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - usb3_hs_ep: endpoint { - remote-endpoint = <&hs_ep>; - }; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; }; - port@1 { - reg = <1>; - usb3_role_switch: endpoint { - remote-endpoint = <&hd3ss3220_out_ep>; - }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index b23ef29..980f325 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -26,6 +26,7 @@ properties: - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five - renesas,usbhs-r9a07g044 # RZ/G2{L,LC} - renesas,usbhs-r9a07g054 # RZ/V2L + - renesas,usbhs-r9a08g045 # RZ/G3S - const: renesas,rzg2l-usbhs - items: @@ -130,6 +131,7 @@ allOf: - renesas,usbhs-r9a07g043 - renesas,usbhs-r9a07g044 - renesas,usbhs-r9a07g054 + - renesas,usbhs-r9a08g045 then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml new file mode 100644 index 0000000..c956053 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml @@ -0,0 +1,415 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/snps,dwc3-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare USB3 Controller common properties + +maintainers: + - Felipe Balbi + +description: + Defines the properties of the DWC3 core as being embedded in either an + vendor-specific implementation or as a standalone component. + +allOf: + - $ref: usb-drd.yaml# + - if: + properties: + dr_mode: + const: peripheral + + required: + - dr_mode + then: + $ref: usb.yaml# + else: + $ref: usb-xhci.yaml# + +properties: + extcon: + maxItems: 1 + deprecated: true + + usb-phy: + minItems: 1 + items: + - description: USB2/HS PHY + - description: USB3/SS PHY + + phys: + minItems: 1 + maxItems: 19 + + phy-names: + minItems: 1 + maxItems: 19 + oneOf: + - items: + enum: [ usb2-phy, usb3-phy ] + - items: + pattern: "^usb(2-([0-9]|1[0-4])|3-[0-3])$" + + snps,usb2-lpm-disable: + description: Indicate if we don't want to enable USB2 HW LPM for host + mode. + type: boolean + + snps,usb3_lpm_capable: + description: Determines if platform is USB3 LPM capable + type: boolean + + snps,usb2-gadget-lpm-disable: + description: Indicate if we don't want to enable USB2 HW LPM for gadget + mode. + type: boolean + + snps,dis-start-transfer-quirk: + description: + When set, disable isoc START TRANSFER command failure SW work-around + for DWC_usb31 version 1.70a-ea06 and prior. + type: boolean + + snps,disable_scramble_quirk: + description: + True when SW should disable data scrambling. Only really useful for FPGA + builds. + type: boolean + + snps,has-lpm-erratum: + description: True when DWC3 was configured with LPM Erratum enabled + type: boolean + + snps,lpm-nyet-threshold: + description: LPM NYET threshold + $ref: /schemas/types.yaml#/definitions/uint8 + + snps,u2exit_lfps_quirk: + description: Set if we want to enable u2exit lfps quirk + type: boolean + + snps,u2ss_inp3_quirk: + description: Set if we enable P3 OK for U2/SS Inactive quirk + type: boolean + + snps,req_p1p2p3_quirk: + description: + When set, the core will always request for P1/P2/P3 transition sequence. + type: boolean + + snps,del_p1p2p3_quirk: + description: + When set core will delay P1/P2/P3 until a certain amount of 8B10B errors + occur. + type: boolean + + snps,del_phy_power_chg_quirk: + description: When set core will delay PHY power change from P0 to P1/P2/P3. + type: boolean + + snps,lfps_filter_quirk: + description: When set core will filter LFPS reception. + type: boolean + + snps,rx_detect_poll_quirk: + description: + when set core will disable a 400us delay to start Polling LFPS after + RX.Detect. + type: boolean + + snps,tx_de_emphasis_quirk: + description: When set core will set Tx de-emphasis value + type: boolean + + snps,tx_de_emphasis: + description: + The value driven to the PHY is controlled by the LTSSM during USB3 + Compliance mode. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: + - 0 # -6dB de-emphasis + - 1 # -3.5dB de-emphasis + - 2 # No de-emphasis + + snps,dis_u3_susphy_quirk: + description: When set core will disable USB3 suspend phy + type: boolean + + snps,dis_u2_susphy_quirk: + description: When set core will disable USB2 suspend phy + type: boolean + + snps,dis_enblslpm_quirk: + description: + When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal + to the PHY. + type: boolean + + snps,dis-u1-entry-quirk: + description: Set if link entering into U1 needs to be disabled + type: boolean + + snps,dis-u2-entry-quirk: + description: Set if link entering into U2 needs to be disabled + type: boolean + + snps,dis_rxdet_inp3_quirk: + description: + When set core will disable receiver detection in PHY P3 power state. + type: boolean + + snps,dis-u2-freeclk-exists-quirk: + description: + When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 + PHY doesn't provide a free-running PHY clock. + type: boolean + + snps,dis-del-phy-power-chg-quirk: + description: + When set core will change PHY power from P0 to P1/P2/P3 without delay. + type: boolean + + snps,dis-tx-ipgap-linecheck-quirk: + description: When set, disable u2mac linestate check during HS transmit + type: boolean + + snps,parkmode-disable-ss-quirk: + description: + When set, all SuperSpeed bus instances in park mode are disabled. + type: boolean + + snps,parkmode-disable-hs-quirk: + description: + When set, all HighSpeed bus instances in park mode are disabled. + type: boolean + + snps,dis_metastability_quirk: + description: + When set, disable metastability workaround. CAUTION! Use only if you are + absolutely sure of it. + type: boolean + + snps,dis-split-quirk: + description: + When set, change the way URBs are handled by the driver. Needed to + avoid -EPROTO errors with usbhid on some devices (Hikey 970). + type: boolean + + snps,gfladj-refclk-lpm-sel-quirk: + description: + When set, run the SOF/ITP counter based on ref_clk. + type: boolean + + snps,resume-hs-terminations: + description: + Fix the issue of HS terminations CRC error on resume by enabling this + quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end + of resume. This option is to support certain legacy ULPI PHYs. + type: boolean + + snps,ulpi-ext-vbus-drv: + description: + Some ULPI USB PHY does not support internal VBUS supply, and driving + the CPEN pin, requires the configuration of the ulpi DRVVBUSEXTERNAL + bit. When set, the xhci host will configure the USB2 PHY drives VBUS + with an external supply. + type: boolean + + snps,is-utmi-l1-suspend: + description: + True when DWC3 asserts output signal utmi_l1_suspend_n, false when + asserts utmi_sleep_n. + type: boolean + + snps,hird-threshold: + description: HIRD threshold + $ref: /schemas/types.yaml#/definitions/uint8 + + snps,hsphy_interface: + description: + High-Speed PHY interface selection between UTMI+ and ULPI when the + DWC_USB3_HSPHY_INTERFACE has value 3. + $ref: /schemas/types.yaml#/definitions/string + enum: [utmi, ulpi] + + snps,quirk-frame-length-adjustment: + description: + Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame + length adjustment when the fladj_30mhz_sdbnd signal is invalid or + incorrect. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x3f + + snps,ref-clock-period-ns: + description: + Value for REFCLKPER field of GUCTL register for reference clock period in + nanoseconds, when the hardware set default does not match the actual + clock. + + This binding is deprecated. Instead, provide an appropriate reference clock. + minimum: 8 + maximum: 62 + deprecated: true + + snps,rx-thr-num-pkt: + description: + USB RX packet threshold count. In host mode, this field specifies + the space that must be available in the RX FIFO before the core can + start the corresponding USB RX transaction (burst). + In device mode, this field specifies the space that must be + available in the RX FIFO before the core can send ERDY for a + flow-controlled endpoint. It is only used for SuperSpeed. + The valid values for this field are from 1 to 15. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,rx-max-burst: + description: + Max USB RX burst size. In host mode, this field specifies the + Maximum Bulk IN burst the DWC_usb3 core can perform. When the system + bus is slower than the USB, RX FIFO can overrun during a long burst. + You can program a smaller value to this field to limit the RX burst + size that the core can perform. It only applies to SS Bulk, + Isochronous, and Interrupt IN endpoints in the host mode. + In device mode, this field specifies the NUMP value that is sent in + ERDY for an OUT endpoint. + The valid values for this field are from 1 to 16. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt: + description: + USB TX packet threshold count. This field specifies the number of + packets that must be in the TXFIFO before the core can start + transmission for the corresponding USB transaction (burst). + This count is valid in both host and device modes. It is only used + for SuperSpeed operation. + Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,tx-max-burst: + description: + Max USB TX burst size. When the system bus is slower than the USB, + TX FIFO can underrun during a long burst. Program a smaller value + to this field to limit the TX burst size that the core can execute. + In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt + OUT endpoints. This value is not used in device mode. + Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,rx-thr-num-pkt-prd: + description: + Periodic ESS RX packet threshold count (host mode only). Set this and + snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.4) to enable periodic ESS RX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,rx-max-burst-prd: + description: + Max periodic ESS RX burst size (host mode only). Set this and + snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.4) to enable periodic ESS RX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt-prd: + description: + Periodic ESS TX packet threshold count (host mode only). Set this and + snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.3) to enable periodic ESS TX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-max-burst-prd: + description: + Max periodic ESS TX burst size (host mode only). Set this and + snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.3) to enable periodic ESS TX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + tx-fifo-resize: + description: Determines if the TX fifos can be dynamically resized depending + on the number of IN endpoints used and if bursting is supported. This + may help improve bandwidth on platforms with higher system latencies, as + increased fifo space allows for the controller to prefetch data into its + internal memory. + type: boolean + + tx-fifo-max-num: + description: Specifies the max number of packets the txfifo resizing logic + can account for when higher endpoint bursting is used. (bMaxBurst > 6) The + higher the number, the more fifo space the txfifo resizing logic will + allocate for that endpoint. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 3 + + snps,incr-burst-type-adjustment: + description: + Value for INCR burst type of GSBUSCFG0 register, undefined length INCR + burst type enable and INCRx type. A single value means INCRX burst mode + enabled. If more than one value specified, undefined length INCR burst + type will be enabled with burst lengths utilized up to the maximum + of the values passed in this property. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + enum: [1, 4, 8, 16, 32, 64, 128, 256] + + num-hc-interrupters: + maximum: 8 + default: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + This port is used with the 'usb-role-switch' property to connect the + dwc3 to type C connector. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Those ports should be used with any connector to the data bus of this + controller using the OF graph bindings specified if the "usb-role-switch" + property is used. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: High Speed (HS) data bus. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) data bus. + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable USB remote wakeup. + +required: + - compatible + - reg + +additionalProperties: true +... + diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 1cd0ca9..4380bb6 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -15,18 +15,7 @@ description: compatible string. allOf: - - $ref: usb-drd.yaml# - - if: - properties: - dr_mode: - const: peripheral - - required: - - dr_mode - then: - $ref: usb.yaml# - else: - $ref: usb-xhci.yaml# + - $ref: snps,dwc3-common.yaml# properties: compatible: @@ -70,32 +59,9 @@ properties: dma-coherent: true - extcon: - maxItems: 1 - deprecated: true - iommus: maxItems: 1 - usb-phy: - minItems: 1 - items: - - description: USB2/HS PHY - - description: USB3/SS PHY - - phys: - minItems: 1 - maxItems: 19 - - phy-names: - minItems: 1 - maxItems: 19 - oneOf: - - items: - enum: [ usb2-phy, usb3-phy ] - - items: - pattern: "^usb(2-([0-9]|1[0-4])|3-[0-3])$" - power-domains: description: The DWC3 has 2 power-domains. The power management unit (PMU) and @@ -109,361 +75,6 @@ properties: resets: minItems: 1 - snps,usb2-lpm-disable: - description: Indicate if we don't want to enable USB2 HW LPM for host - mode. - type: boolean - - snps,usb3_lpm_capable: - description: Determines if platform is USB3 LPM capable - type: boolean - - snps,usb2-gadget-lpm-disable: - description: Indicate if we don't want to enable USB2 HW LPM for gadget - mode. - type: boolean - - snps,dis-start-transfer-quirk: - description: - When set, disable isoc START TRANSFER command failure SW work-around - for DWC_usb31 version 1.70a-ea06 and prior. - type: boolean - - snps,disable_scramble_quirk: - description: - True when SW should disable data scrambling. Only really useful for FPGA - builds. - type: boolean - - snps,has-lpm-erratum: - description: True when DWC3 was configured with LPM Erratum enabled - type: boolean - - snps,lpm-nyet-threshold: - description: LPM NYET threshold - $ref: /schemas/types.yaml#/definitions/uint8 - - snps,u2exit_lfps_quirk: - description: Set if we want to enable u2exit lfps quirk - type: boolean - - snps,u2ss_inp3_quirk: - description: Set if we enable P3 OK for U2/SS Inactive quirk - type: boolean - - snps,req_p1p2p3_quirk: - description: - When set, the core will always request for P1/P2/P3 transition sequence. - type: boolean - - snps,del_p1p2p3_quirk: - description: - When set core will delay P1/P2/P3 until a certain amount of 8B10B errors - occur. - type: boolean - - snps,del_phy_power_chg_quirk: - description: When set core will delay PHY power change from P0 to P1/P2/P3. - type: boolean - - snps,lfps_filter_quirk: - description: When set core will filter LFPS reception. - type: boolean - - snps,rx_detect_poll_quirk: - description: - when set core will disable a 400us delay to start Polling LFPS after - RX.Detect. - type: boolean - - snps,tx_de_emphasis_quirk: - description: When set core will set Tx de-emphasis value - type: boolean - - snps,tx_de_emphasis: - description: - The value driven to the PHY is controlled by the LTSSM during USB3 - Compliance mode. - $ref: /schemas/types.yaml#/definitions/uint8 - enum: - - 0 # -6dB de-emphasis - - 1 # -3.5dB de-emphasis - - 2 # No de-emphasis - - snps,dis_u3_susphy_quirk: - description: When set core will disable USB3 suspend phy - type: boolean - - snps,dis_u2_susphy_quirk: - description: When set core will disable USB2 suspend phy - type: boolean - - snps,dis_enblslpm_quirk: - description: - When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal - to the PHY. - type: boolean - - snps,dis-u1-entry-quirk: - description: Set if link entering into U1 needs to be disabled - type: boolean - - snps,dis-u2-entry-quirk: - description: Set if link entering into U2 needs to be disabled - type: boolean - - snps,dis_rxdet_inp3_quirk: - description: - When set core will disable receiver detection in PHY P3 power state. - type: boolean - - snps,dis-u2-freeclk-exists-quirk: - description: - When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 - PHY doesn't provide a free-running PHY clock. - type: boolean - - snps,dis-del-phy-power-chg-quirk: - description: - When set core will change PHY power from P0 to P1/P2/P3 without delay. - type: boolean - - snps,dis-tx-ipgap-linecheck-quirk: - description: When set, disable u2mac linestate check during HS transmit - type: boolean - - snps,parkmode-disable-ss-quirk: - description: - When set, all SuperSpeed bus instances in park mode are disabled. - type: boolean - - snps,parkmode-disable-hs-quirk: - description: - When set, all HighSpeed bus instances in park mode are disabled. - type: boolean - - snps,dis_metastability_quirk: - description: - When set, disable metastability workaround. CAUTION! Use only if you are - absolutely sure of it. - type: boolean - - snps,dis-split-quirk: - description: - When set, change the way URBs are handled by the driver. Needed to - avoid -EPROTO errors with usbhid on some devices (Hikey 970). - type: boolean - - snps,gfladj-refclk-lpm-sel-quirk: - description: - When set, run the SOF/ITP counter based on ref_clk. - type: boolean - - snps,resume-hs-terminations: - description: - Fix the issue of HS terminations CRC error on resume by enabling this - quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end - of resume. This option is to support certain legacy ULPI PHYs. - type: boolean - - snps,ulpi-ext-vbus-drv: - description: - Some ULPI USB PHY does not support internal VBUS supply, and driving - the CPEN pin, requires the configuration of the ulpi DRVVBUSEXTERNAL - bit. When set, the xhci host will configure the USB2 PHY drives VBUS - with an external supply. - type: boolean - - snps,is-utmi-l1-suspend: - description: - True when DWC3 asserts output signal utmi_l1_suspend_n, false when - asserts utmi_sleep_n. - type: boolean - - snps,hird-threshold: - description: HIRD threshold - $ref: /schemas/types.yaml#/definitions/uint8 - - snps,hsphy_interface: - description: - High-Speed PHY interface selection between UTMI+ and ULPI when the - DWC_USB3_HSPHY_INTERFACE has value 3. - $ref: /schemas/types.yaml#/definitions/string - enum: [utmi, ulpi] - - snps,quirk-frame-length-adjustment: - description: - Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame - length adjustment when the fladj_30mhz_sdbnd signal is invalid or - incorrect. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 0x3f - - snps,ref-clock-period-ns: - description: - Value for REFCLKPER field of GUCTL register for reference clock period in - nanoseconds, when the hardware set default does not match the actual - clock. - - This binding is deprecated. Instead, provide an appropriate reference clock. - minimum: 8 - maximum: 62 - deprecated: true - - snps,rx-thr-num-pkt: - description: - USB RX packet threshold count. In host mode, this field specifies - the space that must be available in the RX FIFO before the core can - start the corresponding USB RX transaction (burst). - In device mode, this field specifies the space that must be - available in the RX FIFO before the core can send ERDY for a - flow-controlled endpoint. It is only used for SuperSpeed. - The valid values for this field are from 1 to 15. (DWC3 SuperSpeed - USB 3.0 Controller Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 15 - - snps,rx-max-burst: - description: - Max USB RX burst size. In host mode, this field specifies the - Maximum Bulk IN burst the DWC_usb3 core can perform. When the system - bus is slower than the USB, RX FIFO can overrun during a long burst. - You can program a smaller value to this field to limit the RX burst - size that the core can perform. It only applies to SS Bulk, - Isochronous, and Interrupt IN endpoints in the host mode. - In device mode, this field specifies the NUMP value that is sent in - ERDY for an OUT endpoint. - The valid values for this field are from 1 to 16. (DWC3 SuperSpeed - USB 3.0 Controller Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-thr-num-pkt: - description: - USB TX packet threshold count. This field specifies the number of - packets that must be in the TXFIFO before the core can start - transmission for the corresponding USB transaction (burst). - This count is valid in both host and device modes. It is only used - for SuperSpeed operation. - Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller - Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 15 - - snps,tx-max-burst: - description: - Max USB TX burst size. When the system bus is slower than the USB, - TX FIFO can underrun during a long burst. Program a smaller value - to this field to limit the TX burst size that the core can execute. - In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt - OUT endpoints. This value is not used in device mode. - Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller - Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,rx-thr-num-pkt-prd: - description: - Periodic ESS RX packet threshold count (host mode only). Set this and - snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.4) to enable periodic ESS RX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,rx-max-burst-prd: - description: - Max periodic ESS RX burst size (host mode only). Set this and - snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.4) to enable periodic ESS RX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-thr-num-pkt-prd: - description: - Periodic ESS TX packet threshold count (host mode only). Set this and - snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.3) to enable periodic ESS TX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-max-burst-prd: - description: - Max periodic ESS TX burst size (host mode only). Set this and - snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.3) to enable periodic ESS TX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - tx-fifo-resize: - description: Determines if the TX fifos can be dynamically resized depending - on the number of IN endpoints used and if bursting is supported. This - may help improve bandwidth on platforms with higher system latencies, as - increased fifo space allows for the controller to prefetch data into its - internal memory. - type: boolean - - tx-fifo-max-num: - description: Specifies the max number of packets the txfifo resizing logic - can account for when higher endpoint bursting is used. (bMaxBurst > 6) The - higher the number, the more fifo space the txfifo resizing logic will - allocate for that endpoint. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 3 - - snps,incr-burst-type-adjustment: - description: - Value for INCR burst type of GSBUSCFG0 register, undefined length INCR - burst type enable and INCRx type. A single value means INCRX burst mode - enabled. If more than one value specified, undefined length INCR burst - type will be enabled with burst lengths utilized up to the maximum - of the values passed in this property. - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 1 - maxItems: 8 - uniqueItems: true - items: - enum: [1, 4, 8, 16, 32, 64, 128, 256] - - num-hc-interrupters: - maximum: 8 - default: 1 - - port: - $ref: /schemas/graph.yaml#/properties/port - description: - This port is used with the 'usb-role-switch' property to connect the - dwc3 to type C connector. - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: - Those ports should be used with any connector to the data bus of this - controller using the OF graph bindings specified if the "usb-role-switch" - property is used. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: High Speed (HS) data bus. - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: Super Speed (SS) data bus. - - wakeup-source: - $ref: /schemas/types.yaml#/definitions/flag - description: - Enable USB remote wakeup. - unevaluatedProperties: false required: diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index 54c6586..bec1c80 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -56,26 +56,26 @@ examples: #size-cells = <0>; hd3ss3220@47 { - compatible = "ti,hd3ss3220"; - reg = <0x47>; - interrupt-parent = <&gpio6>; - interrupts = <3>; + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - hd3ss3220_in_ep: endpoint { - remote-endpoint = <&ss_ep>; - }; - }; - port@1 { - reg = <1>; - hd3ss3220_out_ep: endpoint { - remote-endpoint = <&usb3_role_switch>; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml b/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml index ddda734..c4a91b3 100644 --- a/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml @@ -48,8 +48,8 @@ examples: device_type = "pci"; usb@0 { - compatible = "pci104c,8241"; - reg = <0x0 0x0 0x0 0x0 0x0>; - ti,pwron-active-high; + compatible = "pci104c,8241"; + reg = <0x0 0x0 0x0 0x0 0x0>; + ti,pwron-active-high; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml index 8ef1177..61217da 100644 --- a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml +++ b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml @@ -51,19 +51,19 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb451,8027"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; - vdd-supply = <&usb_hub_fixed_3v3>; + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb451,8025"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; - vdd-supply = <&usb_hub_fixed_3v3>; + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml index c2e29bd..bce730a 100644 --- a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml @@ -51,17 +51,17 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb451,8142"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb451,8140"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index d594d0e..d75728e 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -404,7 +404,6 @@ PHY devm_usb_get_phy() devm_usb_get_phy_by_node() devm_usb_get_phy_by_phandle() - devm_usb_put_phy() PINCTRL devm_pinctrl_get() diff --git a/Documentation/usb/usbip_protocol.rst b/Documentation/usb/usbip_protocol.rst index adc1589..3da1df3 100644 --- a/Documentation/usb/usbip_protocol.rst +++ b/Documentation/usb/usbip_protocol.rst @@ -285,17 +285,17 @@ OP_REP_IMPORT: +-----------+--------+------------+---------------------------------------------------+ | 0x138 | 2 | | bcdDevice | +-----------+--------+------------+---------------------------------------------------+ -| 0x139 | 1 | | bDeviceClass | +| 0x13A | 1 | | bDeviceClass | +-----------+--------+------------+---------------------------------------------------+ -| 0x13A | 1 | | bDeviceSubClass | +| 0x13B | 1 | | bDeviceSubClass | +-----------+--------+------------+---------------------------------------------------+ -| 0x13B | 1 | | bDeviceProtocol | +| 0x13C | 1 | | bDeviceProtocol | +-----------+--------+------------+---------------------------------------------------+ -| 0x13C | 1 | | bConfigurationValue | +| 0x13D | 1 | | bConfigurationValue | +-----------+--------+------------+---------------------------------------------------+ -| 0x13D | 1 | | bNumConfigurations | +| 0x13E | 1 | | bNumConfigurations | +-----------+--------+------------+---------------------------------------------------+ -| 0x13E | 1 | | bNumInterfaces | +| 0x13F | 1 | | bNumInterfaces | +-----------+--------+------------+---------------------------------------------------+ The following four commands have a common basic header called diff --git a/MAINTAINERS b/MAINTAINERS index 5bad61c..d65e600 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5481,9 +5481,12 @@ F: include/linux/platform_data/cros_usbpd_notify.h CHROMEOS EC USB TYPE-C DRIVER M: Prashant Malani +M: Benson Leung +M: Abhishek Pandit-Subedi L: chrome-platform@lists.linux.dev S: Maintained F: drivers/platform/chrome/cros_ec_typec.* +F: drivers/platform/chrome/cros_typec_altmode.* F: drivers/platform/chrome/cros_typec_switch.c F: drivers/platform/chrome/cros_typec_vdm.* @@ -5499,6 +5502,13 @@ L: chrome-platform@lists.linux.dev S: Maintained F: drivers/watchdog/cros_ec_wdt.c +CHROMEOS UCSI DRIVER +M: Abhishek Pandit-Subedi +M: Łukasz Bartosik +L: chrome-platform@lists.linux.dev +S: Maintained +F: drivers/usb/typec/ucsi/cros_ec_ucsi.c + CHRONTEL CH7322 CEC DRIVER M: Joe Tessler L: linux-media@vger.kernel.org diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig index b7dbaf7..1b2f2bd 100644 --- a/drivers/platform/chrome/Kconfig +++ b/drivers/platform/chrome/Kconfig @@ -237,12 +237,19 @@ config CROS_EC_SYSFS To compile this driver as a module, choose M here: the module will be called cros_ec_sysfs. +config CROS_EC_TYPEC_ALTMODES + bool + help + Selectable symbol to enable altmodes. + config CROS_EC_TYPEC tristate "ChromeOS EC Type-C Connector Control" depends on MFD_CROS_EC_DEV && TYPEC depends on CROS_USBPD_NOTIFY depends on USB_ROLE_SWITCH default MFD_CROS_EC_DEV + select CROS_EC_TYPEC_ALTMODES if TYPEC_DP_ALTMODE + select CROS_EC_TYPEC_ALTMODES if TYPEC_TBT_ALTMODE help If you say Y here, you get support for accessing Type C connector information from the Chrome OS EC. diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile index fb83354..1a5a484 100644 --- a/drivers/platform/chrome/Makefile +++ b/drivers/platform/chrome/Makefile @@ -19,7 +19,11 @@ obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o obj-$(CONFIG_CROS_EC_UART) += cros_ec_uart.o cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_mec.o cros-ec-typec-objs := cros_ec_typec.o cros_typec_vdm.o +ifneq ($(CONFIG_CROS_EC_TYPEC_ALTMODES),) + cros-ec-typec-objs += cros_typec_altmode.o +endif obj-$(CONFIG_CROS_EC_TYPEC) += cros-ec-typec.o + obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o obj-$(CONFIG_CROS_EC_PROTO) += cros_ec_proto.o cros_ec_trace.o obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT) += cros_kbd_led_backlight.o diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c index ae2f862..6ee1821 100644 --- a/drivers/platform/chrome/cros_ec_typec.c +++ b/drivers/platform/chrome/cros_ec_typec.c @@ -18,6 +18,7 @@ #include "cros_ec_typec.h" #include "cros_typec_vdm.h" +#include "cros_typec_altmode.h" #define DRV_NAME "cros-ec-typec" @@ -290,30 +291,32 @@ static int cros_typec_register_port_altmodes(struct cros_typec_data *typec, struct typec_altmode *amode; /* All PD capable CrOS devices are assumed to support DP altmode. */ + memset(&desc, 0, sizeof(desc)); desc.svid = USB_TYPEC_DP_SID; desc.mode = USB_TYPEC_DP_MODE; desc.vdo = DP_PORT_VDO; - amode = typec_port_register_altmode(port->port, &desc); + amode = cros_typec_register_displayport(port, &desc, + typec->ap_driven_altmode); if (IS_ERR(amode)) return PTR_ERR(amode); port->port_altmode[CROS_EC_ALTMODE_DP] = amode; - typec_altmode_set_drvdata(amode, port); - amode->ops = &port_amode_ops; /* * Register TBT compatibility alt mode. The EC will not enter the mode - * if it doesn't support it, so it's safe to register it unconditionally - * here for now. + * if it doesn't support it and it will not enter automatically by + * design so we can use the |ap_driven_altmode| feature to check if we + * should register it. */ - memset(&desc, 0, sizeof(desc)); - desc.svid = USB_TYPEC_TBT_SID; - desc.mode = TYPEC_ANY_MODE; - amode = typec_port_register_altmode(port->port, &desc); - if (IS_ERR(amode)) - return PTR_ERR(amode); - port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; - typec_altmode_set_drvdata(amode, port); - amode->ops = &port_amode_ops; + if (typec->ap_driven_altmode) { + memset(&desc, 0, sizeof(desc)); + desc.svid = USB_TYPEC_TBT_SID; + desc.mode = TBT_MODE; + desc.inactive = true; + amode = cros_typec_register_thunderbolt(port, &desc); + if (IS_ERR(amode)) + return PTR_ERR(amode); + port->port_altmode[CROS_EC_ALTMODE_TBT] = amode; + } port->state.alt = NULL; port->state.mode = TYPEC_STATE_USB; @@ -576,6 +579,10 @@ static int cros_typec_enable_dp(struct cros_typec_data *typec, if (!ret) ret = typec_mux_set(port->mux, &port->state); + if (!ret) + ret = cros_typec_displayport_status_update(port->state.alt, + port->state.data); + return ret; } @@ -619,6 +626,7 @@ static int cros_typec_configure_mux(struct cros_typec_data *typec, int port_num, }; struct ec_params_usb_pd_mux_ack mux_ack; enum typec_orientation orientation; + struct cros_typec_altmode_node *node; int ret; ret = cros_ec_cmd(typec->ec, 0, EC_CMD_USB_PD_MUX_INFO, @@ -677,6 +685,14 @@ static int cros_typec_configure_mux(struct cros_typec_data *typec, int port_num, port->mux_flags); } + /* Iterate all partner alt-modes and set the active alternate mode. */ + list_for_each_entry(node, &port->partner_mode_list, list) { + typec_altmode_update_active( + node->amode, + port->state.alt && + node->amode->svid == port->state.alt->svid); + } + mux_ack: if (!typec->needs_mux_ack) return ret; @@ -1244,6 +1260,8 @@ static int cros_typec_probe(struct platform_device *pdev) typec->typec_cmd_supported = cros_ec_check_features(ec_dev, EC_FEATURE_TYPEC_CMD); typec->needs_mux_ack = cros_ec_check_features(ec_dev, EC_FEATURE_TYPEC_MUX_REQUIRE_AP_ACK); + typec->ap_driven_altmode = cros_ec_check_features( + ec_dev, EC_FEATURE_TYPEC_REQUIRE_AP_MODE_ENTRY); ret = cros_ec_cmd(typec->ec, 0, EC_CMD_USB_PD_PORTS, NULL, 0, &resp, sizeof(resp)); diff --git a/drivers/platform/chrome/cros_ec_typec.h b/drivers/platform/chrome/cros_ec_typec.h index deda180..9fd5342 100644 --- a/drivers/platform/chrome/cros_ec_typec.h +++ b/drivers/platform/chrome/cros_ec_typec.h @@ -39,6 +39,7 @@ struct cros_typec_data { struct work_struct port_work; bool typec_cmd_supported; bool needs_mux_ack; + bool ap_driven_altmode; }; /* Per port data. */ diff --git a/drivers/platform/chrome/cros_typec_altmode.c b/drivers/platform/chrome/cros_typec_altmode.c new file mode 100644 index 0000000..557340b --- /dev/null +++ b/drivers/platform/chrome/cros_typec_altmode.c @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Alt-mode implementation on ChromeOS EC. + * + * Copyright 2024 Google LLC + * Author: Abhishek Pandit-Subedi + */ +#include "cros_ec_typec.h" + +#include +#include +#include +#include +#include + +#include "cros_typec_altmode.h" + +struct cros_typec_altmode_data { + struct work_struct work; + struct cros_typec_port *port; + struct typec_altmode *alt; + bool ap_mode_entry; + + struct mutex lock; + u32 header; + u32 *vdo_data; + u8 vdo_size; + + u16 sid; + u8 mode; +}; + +struct cros_typec_dp_data { + struct cros_typec_altmode_data adata; + struct typec_displayport_data data; + bool configured; + bool pending_status_update; +}; + +static void cros_typec_altmode_work(struct work_struct *work) +{ + struct cros_typec_altmode_data *data = + container_of(work, struct cros_typec_altmode_data, work); + + mutex_lock(&data->lock); + + if (typec_altmode_vdm(data->alt, data->header, data->vdo_data, + data->vdo_size)) + dev_err(&data->alt->dev, "VDM 0x%x failed\n", data->header); + + data->header = 0; + data->vdo_data = NULL; + data->vdo_size = 0; + + mutex_unlock(&data->lock); +} + +static int cros_typec_altmode_enter(struct typec_altmode *alt, u32 *vdo) +{ + struct cros_typec_altmode_data *adata = typec_altmode_get_drvdata(alt); + struct ec_params_typec_control req = { + .port = adata->port->port_num, + .command = TYPEC_CONTROL_COMMAND_ENTER_MODE, + }; + int svdm_version; + int ret; + + if (!adata->ap_mode_entry) { + dev_warn(&alt->dev, + "EC does not support AP driven mode entry\n"); + return -EOPNOTSUPP; + } + + if (adata->sid == USB_TYPEC_DP_SID) + req.mode_to_enter = CROS_EC_ALTMODE_DP; + else if (adata->sid == USB_TYPEC_TBT_SID) + req.mode_to_enter = CROS_EC_ALTMODE_TBT; + else + return -EOPNOTSUPP; + + ret = cros_ec_cmd(adata->port->typec_data->ec, 0, EC_CMD_TYPEC_CONTROL, + &req, sizeof(req), NULL, 0); + if (ret < 0) + return ret; + + svdm_version = typec_altmode_get_svdm_version(alt); + if (svdm_version < 0) + return svdm_version; + + mutex_lock(&adata->lock); + + adata->header = VDO(adata->sid, 1, svdm_version, CMD_ENTER_MODE); + adata->header |= VDO_OPOS(adata->mode); + adata->header |= VDO_CMDT(CMDT_RSP_ACK); + adata->vdo_data = NULL; + adata->vdo_size = 1; + schedule_work(&adata->work); + + mutex_unlock(&adata->lock); + return ret; +} + +static int cros_typec_altmode_exit(struct typec_altmode *alt) +{ + struct cros_typec_altmode_data *adata = typec_altmode_get_drvdata(alt); + struct ec_params_typec_control req = { + .port = adata->port->port_num, + .command = TYPEC_CONTROL_COMMAND_EXIT_MODES, + }; + int svdm_version; + int ret; + + if (!adata->ap_mode_entry) { + dev_warn(&alt->dev, + "EC does not support AP driven mode exit\n"); + return -EOPNOTSUPP; + } + + ret = cros_ec_cmd(adata->port->typec_data->ec, 0, EC_CMD_TYPEC_CONTROL, + &req, sizeof(req), NULL, 0); + + if (ret < 0) + return ret; + + svdm_version = typec_altmode_get_svdm_version(alt); + if (svdm_version < 0) + return svdm_version; + + mutex_lock(&adata->lock); + + adata->header = VDO(adata->sid, 1, svdm_version, CMD_EXIT_MODE); + adata->header |= VDO_OPOS(adata->mode); + adata->header |= VDO_CMDT(CMDT_RSP_ACK); + adata->vdo_data = NULL; + adata->vdo_size = 1; + schedule_work(&adata->work); + + mutex_unlock(&adata->lock); + return ret; +} + +static int cros_typec_displayport_vdm(struct typec_altmode *alt, u32 header, + const u32 *data, int count) +{ + struct cros_typec_dp_data *dp_data = typec_altmode_get_drvdata(alt); + struct cros_typec_altmode_data *adata = &dp_data->adata; + + + int cmd_type = PD_VDO_CMDT(header); + int cmd = PD_VDO_CMD(header); + int svdm_version; + + svdm_version = typec_altmode_get_svdm_version(alt); + if (svdm_version < 0) + return svdm_version; + + mutex_lock(&adata->lock); + + switch (cmd_type) { + case CMDT_INIT: + if (PD_VDO_SVDM_VER(header) < svdm_version) { + typec_partner_set_svdm_version(adata->port->partner, + PD_VDO_SVDM_VER(header)); + svdm_version = PD_VDO_SVDM_VER(header); + } + + adata->header = VDO(adata->sid, 1, svdm_version, cmd); + adata->header |= VDO_OPOS(adata->mode); + + /* + * DP_CMD_CONFIGURE: We can't actually do anything with the + * provided VDO yet so just send back an ACK. + * + * DP_CMD_STATUS_UPDATE: We wait for Mux changes to send + * DPStatus Acks. + */ + switch (cmd) { + case DP_CMD_CONFIGURE: + dp_data->data.conf = *data; + adata->header |= VDO_CMDT(CMDT_RSP_ACK); + dp_data->configured = true; + schedule_work(&adata->work); + break; + case DP_CMD_STATUS_UPDATE: + dp_data->pending_status_update = true; + break; + default: + adata->header |= VDO_CMDT(CMDT_RSP_ACK); + schedule_work(&adata->work); + break; + } + + break; + default: + break; + } + + mutex_unlock(&adata->lock); + return 0; +} + +static int cros_typec_thunderbolt_vdm(struct typec_altmode *alt, u32 header, + const u32 *data, int count) +{ + struct cros_typec_altmode_data *adata = typec_altmode_get_drvdata(alt); + + int cmd_type = PD_VDO_CMDT(header); + int cmd = PD_VDO_CMD(header); + int svdm_version; + + svdm_version = typec_altmode_get_svdm_version(alt); + if (svdm_version < 0) + return svdm_version; + + mutex_lock(&adata->lock); + + switch (cmd_type) { + case CMDT_INIT: + if (PD_VDO_SVDM_VER(header) < svdm_version) { + typec_partner_set_svdm_version(adata->port->partner, + PD_VDO_SVDM_VER(header)); + svdm_version = PD_VDO_SVDM_VER(header); + } + + adata->header = VDO(adata->sid, 1, svdm_version, cmd); + adata->header |= VDO_OPOS(adata->mode); + + switch (cmd) { + case CMD_ENTER_MODE: + /* Don't respond to the enter mode vdm because it + * triggers mux configuration. This is handled directly + * by the cros_ec_typec driver so the Thunderbolt driver + * doesn't need to be involved. + */ + break; + default: + adata->header |= VDO_CMDT(CMDT_RSP_ACK); + schedule_work(&adata->work); + break; + } + + break; + default: + break; + } + + mutex_unlock(&adata->lock); + return 0; +} + + +static int cros_typec_altmode_vdm(struct typec_altmode *alt, u32 header, + const u32 *data, int count) +{ + struct cros_typec_altmode_data *adata = typec_altmode_get_drvdata(alt); + + if (!adata->ap_mode_entry) + return -EOPNOTSUPP; + + if (adata->sid == USB_TYPEC_DP_SID) + return cros_typec_displayport_vdm(alt, header, data, count); + + if (adata->sid == USB_TYPEC_TBT_SID) + return cros_typec_thunderbolt_vdm(alt, header, data, count); + + return -EINVAL; +} + +static const struct typec_altmode_ops cros_typec_altmode_ops = { + .enter = cros_typec_altmode_enter, + .exit = cros_typec_altmode_exit, + .vdm = cros_typec_altmode_vdm, +}; + +#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE) +int cros_typec_displayport_status_update(struct typec_altmode *altmode, + struct typec_displayport_data *data) +{ + struct cros_typec_dp_data *dp_data = + typec_altmode_get_drvdata(altmode); + struct cros_typec_altmode_data *adata = &dp_data->adata; + + if (!dp_data->pending_status_update) { + dev_dbg(&altmode->dev, + "Got DPStatus without a pending request\n"); + return 0; + } + + if (dp_data->configured && dp_data->data.conf != data->conf) + dev_dbg(&altmode->dev, + "DP Conf doesn't match. Requested 0x%04x, Actual 0x%04x\n", + dp_data->data.conf, data->conf); + + mutex_lock(&adata->lock); + + dp_data->data = *data; + dp_data->pending_status_update = false; + adata->header |= VDO_CMDT(CMDT_RSP_ACK); + adata->vdo_data = &dp_data->data.status; + adata->vdo_size = 2; + schedule_work(&adata->work); + + mutex_unlock(&adata->lock); + + return 0; +} + +struct typec_altmode * +cros_typec_register_displayport(struct cros_typec_port *port, + struct typec_altmode_desc *desc, + bool ap_mode_entry) +{ + struct typec_altmode *alt; + struct cros_typec_dp_data *dp_data; + struct cros_typec_altmode_data *adata; + + alt = typec_port_register_altmode(port->port, desc); + if (IS_ERR(alt)) + return alt; + + dp_data = devm_kzalloc(&alt->dev, sizeof(*dp_data), GFP_KERNEL); + if (!dp_data) { + typec_unregister_altmode(alt); + return ERR_PTR(-ENOMEM); + } + + adata = &dp_data->adata; + INIT_WORK(&adata->work, cros_typec_altmode_work); + mutex_init(&adata->lock); + adata->alt = alt; + adata->port = port; + adata->ap_mode_entry = ap_mode_entry; + adata->sid = desc->svid; + adata->mode = desc->mode; + + typec_altmode_set_ops(alt, &cros_typec_altmode_ops); + typec_altmode_set_drvdata(alt, adata); + + return alt; +} +#endif + +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) +struct typec_altmode * +cros_typec_register_thunderbolt(struct cros_typec_port *port, + struct typec_altmode_desc *desc) +{ + struct typec_altmode *alt; + struct cros_typec_altmode_data *adata; + + alt = typec_port_register_altmode(port->port, desc); + if (IS_ERR(alt)) + return alt; + + adata = devm_kzalloc(&alt->dev, sizeof(*adata), GFP_KERNEL); + if (!adata) { + typec_unregister_altmode(alt); + return ERR_PTR(-ENOMEM); + } + + INIT_WORK(&adata->work, cros_typec_altmode_work); + adata->alt = alt; + adata->port = port; + adata->ap_mode_entry = true; + adata->sid = desc->svid; + adata->mode = desc->mode; + + typec_altmode_set_ops(alt, &cros_typec_altmode_ops); + typec_altmode_set_drvdata(alt, adata); + + return alt; +} +#endif diff --git a/drivers/platform/chrome/cros_typec_altmode.h b/drivers/platform/chrome/cros_typec_altmode.h new file mode 100644 index 0000000..3f2aa95 --- /dev/null +++ b/drivers/platform/chrome/cros_typec_altmode.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __CROS_TYPEC_ALTMODE_H__ +#define __CROS_TYPEC_ALTMODE_H__ + +#include +#include + +struct cros_typec_port; +struct typec_altmode; +struct typec_altmode_desc; +struct typec_displayport_data; + +#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE) +struct typec_altmode * +cros_typec_register_displayport(struct cros_typec_port *port, + struct typec_altmode_desc *desc, + bool ap_mode_entry); + +int cros_typec_displayport_status_update(struct typec_altmode *altmode, + struct typec_displayport_data *data); +#else +static inline struct typec_altmode * +cros_typec_register_displayport(struct cros_typec_port *port, + struct typec_altmode_desc *desc, + bool ap_mode_entry) +{ + return typec_port_register_altmode(port->port, desc); +} + +static inline int cros_typec_displayport_status_update(struct typec_altmode *altmode, + struct typec_displayport_data *data) +{ + return 0; +} +#endif + +#if IS_ENABLED(CONFIG_TYPEC_TBT_ALTMODE) +struct typec_altmode * +cros_typec_register_thunderbolt(struct cros_typec_port *port, + struct typec_altmode_desc *desc); +#else +static inline struct typec_altmode * +cros_typec_register_thunderbolt(struct cros_typec_port *port, + struct typec_altmode_desc *desc) +{ + return typec_port_register_altmode(port->port, desc); +} +#endif + +#endif /* __CROS_TYPEC_ALTMODE_H__ */ diff --git a/drivers/thunderbolt/ctl.c b/drivers/thunderbolt/ctl.c index 4bdb2d4..dc1f456 100644 --- a/drivers/thunderbolt/ctl.c +++ b/drivers/thunderbolt/ctl.c @@ -70,6 +70,9 @@ struct tb_ctl { #define tb_ctl_dbg(ctl, format, arg...) \ dev_dbg(&(ctl)->nhi->pdev->dev, format, ## arg) +#define tb_ctl_dbg_once(ctl, format, arg...) \ + dev_dbg_once(&(ctl)->nhi->pdev->dev, format, ## arg) + static DECLARE_WAIT_QUEUE_HEAD(tb_cfg_request_cancel_queue); /* Serializes access to request kref_get/put */ static DEFINE_MUTEX(tb_cfg_request_lock); @@ -265,7 +268,7 @@ static struct tb_cfg_result parse_header(const struct ctl_pkg *pkg, u32 len, return res; } -static void tb_cfg_print_error(struct tb_ctl *ctl, +static void tb_cfg_print_error(struct tb_ctl *ctl, enum tb_cfg_space space, const struct tb_cfg_result *res) { WARN_ON(res->err != 1); @@ -279,8 +282,8 @@ static void tb_cfg_print_error(struct tb_ctl *ctl, * Invalid cfg_space/offset/length combination in * cfg_read/cfg_write. */ - tb_ctl_dbg(ctl, "%llx:%x: invalid config space or offset\n", - res->response_route, res->response_port); + tb_ctl_dbg_once(ctl, "%llx:%x: invalid config space (%u) or offset\n", + res->response_route, res->response_port, space); return; case TB_CFG_ERROR_NO_SUCH_PORT: /* @@ -1072,7 +1075,7 @@ static int tb_cfg_get_error(struct tb_ctl *ctl, enum tb_cfg_space space, res->tb_error == TB_CFG_ERROR_INVALID_CONFIG_SPACE) return -ENODEV; - tb_cfg_print_error(ctl, res); + tb_cfg_print_error(ctl, space, res); if (res->tb_error == TB_CFG_ERROR_LOCK) return -EACCES; diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h index bf930a1..7e08ca8 100644 --- a/drivers/thunderbolt/ctl.h +++ b/drivers/thunderbolt/ctl.h @@ -140,5 +140,4 @@ int tb_cfg_write(struct tb_ctl *ctl, const void *buffer, u64 route, u32 port, enum tb_cfg_space space, u32 offset, u32 length); int tb_cfg_get_upstream_port(struct tb_ctl *ctl, u64 route); - #endif diff --git a/drivers/thunderbolt/debugfs.c b/drivers/thunderbolt/debugfs.c index a1d0d8a..f8328ca 100644 --- a/drivers/thunderbolt/debugfs.c +++ b/drivers/thunderbolt/debugfs.c @@ -168,6 +168,13 @@ static bool parse_line(char **line, u32 *offs, u32 *val, int short_fmt_len, * offset relative_offset cap_id vs_cap_id value\n * v[0] v[1] v[2] v[3] v[4] * + * For Path configuration space: + * Short format is: offset value\n + * v[0] v[1] + * Long format as produced from the read side: + * offset relative_offset in_hop_id value\n + * v[0] v[1] v[2] v[3] + * * For Counter configuration space: * Short format is: offset\n * v[0] @@ -191,14 +198,33 @@ static bool parse_line(char **line, u32 *offs, u32 *val, int short_fmt_len, } #if IS_ENABLED(CONFIG_USB4_DEBUGFS_WRITE) +/* + * Path registers need to be written in double word pairs and they both must be + * read before written. This writes one double word in patch config space + * following the spec flow. + */ +static int path_write_one(struct tb_port *port, u32 val, u32 offset) +{ + u32 index = offset % PATH_LEN; + u32 offs = offset - index; + u32 data[PATH_LEN]; + int ret; + + ret = tb_port_read(port, data, TB_CFG_HOPS, offs, PATH_LEN); + if (ret) + return ret; + data[index] = val; + return tb_port_write(port, data, TB_CFG_HOPS, offs, PATH_LEN); +} + static ssize_t regs_write(struct tb_switch *sw, struct tb_port *port, - const char __user *user_buf, size_t count, - loff_t *ppos) + enum tb_cfg_space space, const char __user *user_buf, + size_t count, loff_t *ppos) { + int long_fmt_len, ret = 0; struct tb *tb = sw->tb; char *line, *buf; u32 val, offset; - int ret = 0; buf = validate_and_copy_from_user(user_buf, &count); if (IS_ERR(buf)) @@ -214,12 +240,21 @@ static ssize_t regs_write(struct tb_switch *sw, struct tb_port *port, /* User did hardware changes behind the driver's back */ add_taint(TAINT_USER, LOCKDEP_STILL_OK); + if (space == TB_CFG_HOPS) + long_fmt_len = 4; + else + long_fmt_len = 5; + line = buf; - while (parse_line(&line, &offset, &val, 2, 5)) { - if (port) - ret = tb_port_write(port, &val, TB_CFG_PORT, offset, 1); - else + while (parse_line(&line, &offset, &val, 2, long_fmt_len)) { + if (port) { + if (space == TB_CFG_HOPS) + ret = path_write_one(port, val, offset); + else + ret = tb_port_write(port, &val, space, offset, 1); + } else { ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, offset, 1); + } if (ret) break; } @@ -240,7 +275,16 @@ static ssize_t port_regs_write(struct file *file, const char __user *user_buf, struct seq_file *s = file->private_data; struct tb_port *port = s->private; - return regs_write(port->sw, port, user_buf, count, ppos); + return regs_write(port->sw, port, TB_CFG_PORT, user_buf, count, ppos); +} + +static ssize_t path_write(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct tb_port *port = s->private; + + return regs_write(port->sw, port, TB_CFG_HOPS, user_buf, count, ppos); } static ssize_t switch_regs_write(struct file *file, const char __user *user_buf, @@ -249,7 +293,7 @@ static ssize_t switch_regs_write(struct file *file, const char __user *user_buf, struct seq_file *s = file->private_data; struct tb_switch *sw = s->private; - return regs_write(sw, NULL, user_buf, count, ppos); + return regs_write(sw, NULL, TB_CFG_SWITCH, user_buf, count, ppos); } static bool parse_sb_line(char **line, u8 *reg, u8 *data, size_t data_size, @@ -401,6 +445,7 @@ out: #define DEBUGFS_MODE 0600 #else #define port_regs_write NULL +#define path_write NULL #define switch_regs_write NULL #define port_sb_regs_write NULL #define retimer_sb_regs_write NULL @@ -2243,7 +2288,7 @@ out_rpm_put: return ret; } -DEBUGFS_ATTR_RO(path); +DEBUGFS_ATTR_RW(path); static int counter_set_regs_show(struct tb_port *port, struct seq_file *s, int counter) @@ -2368,6 +2413,8 @@ void tb_switch_debugfs_init(struct tb_switch *sw) sw->debugfs_dir = debugfs_dir; debugfs_create_file("regs", DEBUGFS_MODE, debugfs_dir, sw, &switch_regs_fops); + if (sw->drom) + debugfs_create_blob("drom", 0400, debugfs_dir, &sw->drom_blob); tb_switch_for_each_port(sw, port) { struct dentry *debugfs_dir; diff --git a/drivers/thunderbolt/eeprom.c b/drivers/thunderbolt/eeprom.c index eb241b2..9c1d65d 100644 --- a/drivers/thunderbolt/eeprom.c +++ b/drivers/thunderbolt/eeprom.c @@ -435,6 +435,29 @@ static int tb_drom_parse_entries(struct tb_switch *sw, size_t header_size) return 0; } +static int tb_switch_drom_alloc(struct tb_switch *sw, size_t size) +{ + sw->drom = kzalloc(size, GFP_KERNEL); + if (!sw->drom) + return -ENOMEM; + +#ifdef CONFIG_DEBUG_FS + sw->drom_blob.data = sw->drom; + sw->drom_blob.size = size; +#endif + return 0; +} + +static void tb_switch_drom_free(struct tb_switch *sw) +{ +#ifdef CONFIG_DEBUG_FS + sw->drom_blob.data = NULL; + sw->drom_blob.size = 0; +#endif + kfree(sw->drom); + sw->drom = NULL; +} + /* * tb_drom_copy_efi - copy drom supplied by EFI to sw->drom if present */ @@ -447,9 +470,9 @@ static int tb_drom_copy_efi(struct tb_switch *sw, u16 *size) if (len < 0 || len < sizeof(struct tb_drom_header)) return -EINVAL; - sw->drom = kmalloc(len, GFP_KERNEL); - if (!sw->drom) - return -ENOMEM; + res = tb_switch_drom_alloc(sw, len); + if (res) + return res; res = device_property_read_u8_array(dev, "ThunderboltDROM", sw->drom, len); @@ -464,8 +487,7 @@ static int tb_drom_copy_efi(struct tb_switch *sw, u16 *size) return 0; err: - kfree(sw->drom); - sw->drom = NULL; + tb_switch_drom_free(sw); return -EINVAL; } @@ -491,13 +513,15 @@ static int tb_drom_copy_nvm(struct tb_switch *sw, u16 *size) /* Size includes CRC8 + UID + CRC32 */ *size += 1 + 8 + 4; - sw->drom = kzalloc(*size, GFP_KERNEL); - if (!sw->drom) - return -ENOMEM; + ret = tb_switch_drom_alloc(sw, *size); + if (ret) + return ret; ret = dma_port_flash_read(sw->dma_port, drom_offset, sw->drom, *size); - if (ret) - goto err_free; + if (ret) { + tb_switch_drom_free(sw); + return ret; + } /* * Read UID from the minimal DROM because the one in NVM is just @@ -505,11 +529,6 @@ static int tb_drom_copy_nvm(struct tb_switch *sw, u16 *size) */ tb_drom_read_uid_only(sw, &sw->uid); return 0; - -err_free: - kfree(sw->drom); - sw->drom = NULL; - return ret; } static int usb4_copy_drom(struct tb_switch *sw, u16 *size) @@ -522,15 +541,13 @@ static int usb4_copy_drom(struct tb_switch *sw, u16 *size) /* Size includes CRC8 + UID + CRC32 */ *size += 1 + 8 + 4; - sw->drom = kzalloc(*size, GFP_KERNEL); - if (!sw->drom) - return -ENOMEM; + ret = tb_switch_drom_alloc(sw, *size); + if (ret) + return ret; ret = usb4_switch_drom_read(sw, 0, sw->drom, *size); - if (ret) { - kfree(sw->drom); - sw->drom = NULL; - } + if (ret) + tb_switch_drom_free(sw); return ret; } @@ -552,19 +569,14 @@ static int tb_drom_bit_bang(struct tb_switch *sw, u16 *size) return -EIO; } - sw->drom = kzalloc(*size, GFP_KERNEL); - if (!sw->drom) - return -ENOMEM; + ret = tb_switch_drom_alloc(sw, *size); + if (ret) + return ret; ret = tb_eeprom_read_n(sw, 0, sw->drom, *size); if (ret) - goto err; - - return 0; + tb_switch_drom_free(sw); -err: - kfree(sw->drom); - sw->drom = NULL; return ret; } @@ -646,9 +658,7 @@ static int tb_drom_parse(struct tb_switch *sw, u16 size) return 0; err: - kfree(sw->drom); - sw->drom = NULL; - + tb_switch_drom_free(sw); return ret; } diff --git a/drivers/thunderbolt/path.c b/drivers/thunderbolt/path.c index f760e54..e1a5f6e 100644 --- a/drivers/thunderbolt/path.c +++ b/drivers/thunderbolt/path.c @@ -581,10 +581,10 @@ int tb_path_activate(struct tb_path *path) } } path->activated = true; - tb_dbg(path->tb, "path activation complete\n"); + tb_dbg(path->tb, "%s path activation complete\n", path->name); return 0; err: - tb_WARN(path->tb, "path activation failed\n"); + tb_WARN(path->tb, "%s path activation failed\n", path->name); return res; } diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index a7c6919..390abcf 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -20,6 +20,12 @@ #define TB_RELEASE_BW_TIMEOUT 10000 /* ms */ /* + * How many time bandwidth allocation request from graphics driver is + * retried if the DP tunnel is still activating. + */ +#define TB_BW_ALLOC_RETRIES 3 + +/* * Minimum bandwidth (in Mb/s) that is needed in the single transmitter/receiver * direction. This is 40G - 10% guard band bandwidth. */ @@ -69,14 +75,20 @@ static inline struct tb *tcm_to_tb(struct tb_cm *tcm) } struct tb_hotplug_event { - struct work_struct work; + struct delayed_work work; struct tb *tb; u64 route; u8 port; bool unplug; + int retry; }; +static void tb_scan_port(struct tb_port *port); static void tb_handle_hotplug(struct work_struct *work); +static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port, + const char *reason); +static void tb_queue_dp_bandwidth_request(struct tb *tb, u64 route, u8 port, + int retry, unsigned long delay); static void tb_queue_hotplug(struct tb *tb, u64 route, u8 port, bool unplug) { @@ -90,8 +102,8 @@ static void tb_queue_hotplug(struct tb *tb, u64 route, u8 port, bool unplug) ev->route = route; ev->port = port; ev->unplug = unplug; - INIT_WORK(&ev->work, tb_handle_hotplug); - queue_work(tb->wq, &ev->work); + INIT_DELAYED_WORK(&ev->work, tb_handle_hotplug); + queue_delayed_work(tb->wq, &ev->work, 0); } /* enumeration & hot plug handling */ @@ -961,7 +973,7 @@ static int tb_tunnel_usb3(struct tb *tb, struct tb_switch *sw) return 0; err_free: - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); err_reclaim: if (tb_route(parent)) tb_reclaim_usb3_bandwidth(tb, down, up); @@ -1238,8 +1250,6 @@ static void tb_configure_link(struct tb_port *down, struct tb_port *up, tb_switch_configure_link(sw); } -static void tb_scan_port(struct tb_port *port); - /* * tb_scan_switch() - scan for and initialize downstream switches */ @@ -1727,7 +1737,7 @@ static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel) break; } - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } /* @@ -1864,12 +1874,76 @@ static struct tb_port *tb_find_dp_out(struct tb *tb, struct tb_port *in) return NULL; } -static bool tb_tunnel_one_dp(struct tb *tb, struct tb_port *in, +static void tb_dp_tunnel_active(struct tb_tunnel *tunnel, void *data) +{ + struct tb_port *in = tunnel->src_port; + struct tb_port *out = tunnel->dst_port; + struct tb *tb = data; + + mutex_lock(&tb->lock); + if (tb_tunnel_is_active(tunnel)) { + int consumed_up, consumed_down, ret; + + tb_tunnel_dbg(tunnel, "DPRX capabilities read completed\n"); + + /* If fail reading tunnel's consumed bandwidth, tear it down */ + ret = tb_tunnel_consumed_bandwidth(tunnel, &consumed_up, + &consumed_down); + if (ret) { + tb_tunnel_warn(tunnel, + "failed to read consumed bandwidth, tearing down\n"); + tb_deactivate_and_free_tunnel(tunnel); + } else { + tb_reclaim_usb3_bandwidth(tb, in, out); + /* + * Transition the links to asymmetric if the + * consumption exceeds the threshold. + */ + tb_configure_asym(tb, in, out, consumed_up, + consumed_down); + /* + * Update the domain with the new bandwidth + * estimation. + */ + tb_recalc_estimated_bandwidth(tb); + /* + * In case of DP tunnel exists, change host + * router's 1st children TMU mode to HiFi for + * CL0s to work. + */ + tb_increase_tmu_accuracy(tunnel); + } + } else { + struct tb_port *in = tunnel->src_port; + + /* + * This tunnel failed to establish. This means DPRX + * negotiation most likely did not complete which + * happens either because there is no graphics driver + * loaded or not all DP cables where connected to the + * discrete router. + * + * In both cases we remove the DP IN adapter from the + * available resources as it is not usable. This will + * also tear down the tunnel and try to re-use the + * released DP OUT. + * + * It will be added back only if there is hotplug for + * the DP IN again. + */ + tb_tunnel_warn(tunnel, "not active, tearing down\n"); + tb_dp_resource_unavailable(tb, in, "DPRX negotiation failed"); + } + mutex_unlock(&tb->lock); + + tb_domain_put(tb); +} + +static void tb_tunnel_one_dp(struct tb *tb, struct tb_port *in, struct tb_port *out) { int available_up, available_down, ret, link_nr; struct tb_cm *tcm = tb_priv(tb); - int consumed_up, consumed_down; struct tb_tunnel *tunnel; /* @@ -1921,47 +1995,29 @@ static bool tb_tunnel_one_dp(struct tb *tb, struct tb_port *in, available_up, available_down); tunnel = tb_tunnel_alloc_dp(tb, in, out, link_nr, available_up, - available_down); + available_down, tb_dp_tunnel_active, + tb_domain_get(tb)); if (!tunnel) { tb_port_dbg(out, "could not allocate DP tunnel\n"); goto err_reclaim_usb; } - if (tb_tunnel_activate(tunnel)) { + list_add_tail(&tunnel->list, &tcm->tunnel_list); + + ret = tb_tunnel_activate(tunnel); + if (ret && ret != -EINPROGRESS) { tb_port_info(out, "DP tunnel activation failed, aborting\n"); + list_del(&tunnel->list); goto err_free; } - /* If fail reading tunnel's consumed bandwidth, tear it down */ - ret = tb_tunnel_consumed_bandwidth(tunnel, &consumed_up, &consumed_down); - if (ret) - goto err_deactivate; - - list_add_tail(&tunnel->list, &tcm->tunnel_list); - - tb_reclaim_usb3_bandwidth(tb, in, out); - /* - * Transition the links to asymmetric if the consumption exceeds - * the threshold. - */ - tb_configure_asym(tb, in, out, consumed_up, consumed_down); - - /* Update the domain with the new bandwidth estimation */ - tb_recalc_estimated_bandwidth(tb); - - /* - * In case of DP tunnel exists, change host router's 1st children - * TMU mode to HiFi for CL0s to work. - */ - tb_increase_tmu_accuracy(tunnel); - return true; + return; -err_deactivate: - tb_tunnel_deactivate(tunnel); err_free: - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); err_reclaim_usb: tb_reclaim_usb3_bandwidth(tb, in, out); + tb_domain_put(tb); err_detach_group: tb_detach_bandwidth_group(in); err_dealloc_dp: @@ -1971,8 +2027,6 @@ err_rpm_put: pm_runtime_put_autosuspend(&out->sw->dev); pm_runtime_mark_last_busy(&in->sw->dev); pm_runtime_put_autosuspend(&in->sw->dev); - - return false; } static void tb_tunnel_dp(struct tb *tb) @@ -2090,17 +2144,18 @@ static void tb_switch_exit_redrive(struct tb_switch *sw) } } -static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port) +static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port, + const char *reason) { struct tb_port *in, *out; struct tb_tunnel *tunnel; if (tb_port_is_dpin(port)) { - tb_port_dbg(port, "DP IN resource unavailable\n"); + tb_port_dbg(port, "DP IN resource unavailable: %s\n", reason); in = port; out = NULL; } else { - tb_port_dbg(port, "DP OUT resource unavailable\n"); + tb_port_dbg(port, "DP OUT resource unavailable: %s\n", reason); in = NULL; out = port; } @@ -2182,7 +2237,7 @@ static int tb_disconnect_pci(struct tb *tb, struct tb_switch *sw) tb_tunnel_deactivate(tunnel); list_del(&tunnel->list); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); return 0; } @@ -2212,7 +2267,7 @@ static int tb_tunnel_pci(struct tb *tb, struct tb_switch *sw) if (tb_tunnel_activate(tunnel)) { tb_port_info(up, "PCIe tunnel activation failed, aborting\n"); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); return -EIO; } @@ -2271,7 +2326,7 @@ static int tb_approve_xdomain_paths(struct tb *tb, struct tb_xdomain *xd, return 0; err_free: - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); err_clx: tb_enable_clx(sw); mutex_unlock(&tb->lock); @@ -2334,7 +2389,7 @@ static int tb_disconnect_xdomain_paths(struct tb *tb, struct tb_xdomain *xd, */ static void tb_handle_hotplug(struct work_struct *work) { - struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work); + struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work.work); struct tb *tb = ev->tb; struct tb_cm *tcm = tb_priv(tb); struct tb_switch *sw; @@ -2406,7 +2461,7 @@ static void tb_handle_hotplug(struct work_struct *work) tb_xdomain_put(xd); tb_port_unconfigure_xdomain(port); } else if (tb_port_is_dpout(port) || tb_port_is_dpin(port)) { - tb_dp_resource_unavailable(tb, port); + tb_dp_resource_unavailable(tb, port, "adapter unplug"); } else if (!port->port) { tb_sw_dbg(sw, "xHCI disconnect request\n"); tb_switch_xhci_disconnect(sw); @@ -2639,7 +2694,7 @@ fail: static void tb_handle_dp_bandwidth_request(struct work_struct *work) { - struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work); + struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work.work); int requested_bw, requested_up, requested_down, ret; struct tb_tunnel *tunnel; struct tb *tb = ev->tb; @@ -2666,7 +2721,7 @@ static void tb_handle_dp_bandwidth_request(struct work_struct *work) goto put_sw; } - tb_port_dbg(in, "handling bandwidth allocation request\n"); + tb_port_dbg(in, "handling bandwidth allocation request, retry %d\n", ev->retry); tunnel = tb_find_tunnel(tb, TB_TUNNEL_DP, in, NULL); if (!tunnel) { @@ -2719,12 +2774,33 @@ static void tb_handle_dp_bandwidth_request(struct work_struct *work) ret = tb_alloc_dp_bandwidth(tunnel, &requested_up, &requested_down); if (ret) { - if (ret == -ENOBUFS) + if (ret == -ENOBUFS) { tb_tunnel_warn(tunnel, "not enough bandwidth available\n"); - else + } else if (ret == -ENOTCONN) { + tb_tunnel_dbg(tunnel, "not active yet\n"); + /* + * We got bandwidth allocation request but the + * tunnel is not yet active. This means that + * tb_dp_tunnel_active() is not yet called for + * this tunnel. Allow it some time and retry + * this request a couple of times. + */ + if (ev->retry < TB_BW_ALLOC_RETRIES) { + tb_tunnel_dbg(tunnel, + "retrying bandwidth allocation request\n"); + tb_queue_dp_bandwidth_request(tb, ev->route, + ev->port, + ev->retry + 1, + msecs_to_jiffies(50)); + } else { + tb_tunnel_dbg(tunnel, + "run out of retries, failing the request"); + } + } else { tb_tunnel_warn(tunnel, "failed to change bandwidth allocation\n"); + } } else { tb_tunnel_dbg(tunnel, "bandwidth allocation changed to %d/%d Mb/s\n", @@ -2745,7 +2821,8 @@ unlock: kfree(ev); } -static void tb_queue_dp_bandwidth_request(struct tb *tb, u64 route, u8 port) +static void tb_queue_dp_bandwidth_request(struct tb *tb, u64 route, u8 port, + int retry, unsigned long delay) { struct tb_hotplug_event *ev; @@ -2756,8 +2833,9 @@ static void tb_queue_dp_bandwidth_request(struct tb *tb, u64 route, u8 port) ev->tb = tb; ev->route = route; ev->port = port; - INIT_WORK(&ev->work, tb_handle_dp_bandwidth_request); - queue_work(tb->wq, &ev->work); + ev->retry = retry; + INIT_DELAYED_WORK(&ev->work, tb_handle_dp_bandwidth_request); + queue_delayed_work(tb->wq, &ev->work, delay); } static void tb_handle_notification(struct tb *tb, u64 route, @@ -2777,7 +2855,7 @@ static void tb_handle_notification(struct tb *tb, u64 route, if (tb_cfg_ack_notification(tb->ctl, route, error)) tb_warn(tb, "could not ack notification on %llx\n", route); - tb_queue_dp_bandwidth_request(tb, route, error->port); + tb_queue_dp_bandwidth_request(tb, route, error->port, 0, 0); break; default: @@ -2832,7 +2910,7 @@ static void tb_stop(struct tb *tb) */ if (tb_tunnel_is_dma(tunnel)) tb_tunnel_deactivate(tunnel); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } tb_switch_remove(tb->root_switch); tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ @@ -3028,7 +3106,7 @@ static int tb_resume_noirq(struct tb *tb) if (tb_tunnel_is_usb3(tunnel)) usb3_delay = 500; tb_tunnel_deactivate(tunnel); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } /* Re-create our tunnels now */ @@ -3039,7 +3117,7 @@ static int tb_resume_noirq(struct tb *tb) /* Only need to do it once */ usb3_delay = 0; } - tb_tunnel_restart(tunnel); + tb_tunnel_activate(tunnel); } if (!list_empty(&tcm->tunnel_list)) { /* @@ -3149,7 +3227,7 @@ static int tb_runtime_resume(struct tb *tb) tb_free_invalid_tunnels(tb); tb_restore_children(tb->root_switch); list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) - tb_tunnel_restart(tunnel); + tb_tunnel_activate(tunnel); tb_switch_enter_redrive(tb->root_switch); tcm->hotplug_active = true; mutex_unlock(&tb->lock); diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index ddbf0cd..b54147a 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -9,6 +9,7 @@ #ifndef TB_H_ #define TB_H_ +#include #include #include #include @@ -160,6 +161,7 @@ struct tb_switch_tmu { * @max_pcie_credits: Router preferred number of buffers for PCIe * @max_dma_credits: Router preferred number of buffers for DMA/P2P * @clx: CLx states on the upstream link of the router + * @drom_blob: DROM debugfs blob wrapper * * When the switch is being added or removed to the domain (other * switches) you need to have domain lock held. @@ -212,6 +214,9 @@ struct tb_switch { unsigned int max_pcie_credits; unsigned int max_dma_credits; unsigned int clx; +#ifdef CONFIG_DEBUG_FS + struct debugfs_blob_wrapper drom_blob; +#endif }; /** diff --git a/drivers/thunderbolt/test.c b/drivers/thunderbolt/test.c index 9475c66..1f43182 100644 --- a/drivers/thunderbolt/test.c +++ b/drivers/thunderbolt/test.c @@ -1382,8 +1382,8 @@ static void tb_test_tunnel_pcie(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, tunnel2->paths[1]->hops[0].in_port, up); KUNIT_EXPECT_PTR_EQ(test, tunnel2->paths[1]->hops[1].out_port, down); - tb_tunnel_free(tunnel2); - tb_tunnel_free(tunnel1); + tb_tunnel_put(tunnel2); + tb_tunnel_put(tunnel1); } static void tb_test_tunnel_dp(struct kunit *test) @@ -1406,7 +1406,7 @@ static void tb_test_tunnel_dp(struct kunit *test) in = &host->ports[5]; out = &dev->ports[13]; - tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0); + tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_NOT_NULL(test, tunnel); KUNIT_EXPECT_EQ(test, tunnel->type, TB_TUNNEL_DP); KUNIT_EXPECT_PTR_EQ(test, tunnel->src_port, in); @@ -1421,7 +1421,7 @@ static void tb_test_tunnel_dp(struct kunit *test) KUNIT_ASSERT_EQ(test, tunnel->paths[2]->path_length, 2); KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[2]->hops[0].in_port, out); KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[2]->hops[1].out_port, in); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_tunnel_dp_chain(struct kunit *test) @@ -1452,7 +1452,7 @@ static void tb_test_tunnel_dp_chain(struct kunit *test) in = &host->ports[5]; out = &dev4->ports[14]; - tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0); + tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_NOT_NULL(test, tunnel); KUNIT_EXPECT_EQ(test, tunnel->type, TB_TUNNEL_DP); KUNIT_EXPECT_PTR_EQ(test, tunnel->src_port, in); @@ -1467,7 +1467,7 @@ static void tb_test_tunnel_dp_chain(struct kunit *test) KUNIT_ASSERT_EQ(test, tunnel->paths[2]->path_length, 3); KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[2]->hops[0].in_port, out); KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[2]->hops[2].out_port, in); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_tunnel_dp_tree(struct kunit *test) @@ -1502,7 +1502,7 @@ static void tb_test_tunnel_dp_tree(struct kunit *test) in = &dev2->ports[13]; out = &dev5->ports[13]; - tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0); + tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_NOT_NULL(test, tunnel); KUNIT_EXPECT_EQ(test, tunnel->type, TB_TUNNEL_DP); KUNIT_EXPECT_PTR_EQ(test, tunnel->src_port, in); @@ -1517,7 +1517,7 @@ static void tb_test_tunnel_dp_tree(struct kunit *test) KUNIT_ASSERT_EQ(test, tunnel->paths[2]->path_length, 4); KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[2]->hops[0].in_port, out); KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[2]->hops[3].out_port, in); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_tunnel_dp_max_length(struct kunit *test) @@ -1567,7 +1567,7 @@ static void tb_test_tunnel_dp_max_length(struct kunit *test) in = &dev6->ports[13]; out = &dev12->ports[13]; - tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0); + tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_NOT_NULL(test, tunnel); KUNIT_EXPECT_EQ(test, tunnel->type, TB_TUNNEL_DP); KUNIT_EXPECT_PTR_EQ(test, tunnel->src_port, in); @@ -1597,7 +1597,7 @@ static void tb_test_tunnel_dp_max_length(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[2]->hops[6].out_port, &host->ports[1]); KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[2]->hops[12].out_port, in); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_tunnel_3dp(struct kunit *test) @@ -1637,7 +1637,7 @@ static void tb_test_tunnel_3dp(struct kunit *test) out2 = &dev5->ports[13]; out3 = &dev4->ports[14]; - tunnel1 = tb_tunnel_alloc_dp(NULL, in1, out1, 1, 0, 0); + tunnel1 = tb_tunnel_alloc_dp(NULL, in1, out1, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_TRUE(test, tunnel1 != NULL); KUNIT_EXPECT_EQ(test, tunnel1->type, TB_TUNNEL_DP); KUNIT_EXPECT_PTR_EQ(test, tunnel1->src_port, in1); @@ -1645,7 +1645,7 @@ static void tb_test_tunnel_3dp(struct kunit *test) KUNIT_ASSERT_EQ(test, tunnel1->npaths, 3); KUNIT_ASSERT_EQ(test, tunnel1->paths[0]->path_length, 3); - tunnel2 = tb_tunnel_alloc_dp(NULL, in2, out2, 1, 0, 0); + tunnel2 = tb_tunnel_alloc_dp(NULL, in2, out2, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_TRUE(test, tunnel2 != NULL); KUNIT_EXPECT_EQ(test, tunnel2->type, TB_TUNNEL_DP); KUNIT_EXPECT_PTR_EQ(test, tunnel2->src_port, in2); @@ -1653,7 +1653,7 @@ static void tb_test_tunnel_3dp(struct kunit *test) KUNIT_ASSERT_EQ(test, tunnel2->npaths, 3); KUNIT_ASSERT_EQ(test, tunnel2->paths[0]->path_length, 4); - tunnel3 = tb_tunnel_alloc_dp(NULL, in3, out3, 1, 0, 0); + tunnel3 = tb_tunnel_alloc_dp(NULL, in3, out3, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_TRUE(test, tunnel3 != NULL); KUNIT_EXPECT_EQ(test, tunnel3->type, TB_TUNNEL_DP); KUNIT_EXPECT_PTR_EQ(test, tunnel3->src_port, in3); @@ -1661,8 +1661,8 @@ static void tb_test_tunnel_3dp(struct kunit *test) KUNIT_ASSERT_EQ(test, tunnel3->npaths, 3); KUNIT_ASSERT_EQ(test, tunnel3->paths[0]->path_length, 3); - tb_tunnel_free(tunnel2); - tb_tunnel_free(tunnel1); + tb_tunnel_put(tunnel2); + tb_tunnel_put(tunnel1); } static void tb_test_tunnel_usb3(struct kunit *test) @@ -1716,8 +1716,8 @@ static void tb_test_tunnel_usb3(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, tunnel2->paths[1]->hops[0].in_port, up); KUNIT_EXPECT_PTR_EQ(test, tunnel2->paths[1]->hops[1].out_port, down); - tb_tunnel_free(tunnel2); - tb_tunnel_free(tunnel1); + tb_tunnel_put(tunnel2); + tb_tunnel_put(tunnel1); } static void tb_test_tunnel_port_on_path(struct kunit *test) @@ -1750,7 +1750,7 @@ static void tb_test_tunnel_port_on_path(struct kunit *test) in = &dev2->ports[13]; out = &dev5->ports[13]; - dp_tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0); + dp_tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_NOT_NULL(test, dp_tunnel); KUNIT_EXPECT_TRUE(test, tb_tunnel_port_on_path(dp_tunnel, in)); @@ -1783,7 +1783,7 @@ static void tb_test_tunnel_port_on_path(struct kunit *test) port = &dev4->ports[1]; KUNIT_EXPECT_FALSE(test, tb_tunnel_port_on_path(dp_tunnel, port)); - tb_tunnel_free(dp_tunnel); + tb_tunnel_put(dp_tunnel); } static void tb_test_tunnel_dma(struct kunit *test) @@ -1826,7 +1826,7 @@ static void tb_test_tunnel_dma(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[1]->hops[0].out_port, port); KUNIT_EXPECT_EQ(test, tunnel->paths[1]->hops[0].next_hop_index, 8); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_tunnel_dma_rx(struct kunit *test) @@ -1863,7 +1863,7 @@ static void tb_test_tunnel_dma_rx(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[0]->hops[0].out_port, nhi); KUNIT_EXPECT_EQ(test, tunnel->paths[0]->hops[0].next_hop_index, 2); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_tunnel_dma_tx(struct kunit *test) @@ -1900,7 +1900,7 @@ static void tb_test_tunnel_dma_tx(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[0]->hops[0].out_port, port); KUNIT_EXPECT_EQ(test, tunnel->paths[0]->hops[0].next_hop_index, 15); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_tunnel_dma_chain(struct kunit *test) @@ -1966,7 +1966,7 @@ static void tb_test_tunnel_dma_chain(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, tunnel->paths[1]->hops[2].out_port, port); KUNIT_EXPECT_EQ(test, tunnel->paths[1]->hops[2].next_hop_index, 8); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_tunnel_dma_match(struct kunit *test) @@ -1993,7 +1993,7 @@ static void tb_test_tunnel_dma_match(struct kunit *test) KUNIT_ASSERT_TRUE(test, tb_tunnel_match_dma(tunnel, -1, -1, -1, -1)); KUNIT_ASSERT_FALSE(test, tb_tunnel_match_dma(tunnel, 8, -1, 8, -1)); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); tunnel = tb_tunnel_alloc_dma(NULL, nhi, port, 15, 1, -1, -1); KUNIT_ASSERT_NOT_NULL(test, tunnel); @@ -2005,7 +2005,7 @@ static void tb_test_tunnel_dma_match(struct kunit *test) KUNIT_ASSERT_FALSE(test, tb_tunnel_match_dma(tunnel, -1, -1, 15, 1)); KUNIT_ASSERT_FALSE(test, tb_tunnel_match_dma(tunnel, 15, 11, -1, -1)); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); tunnel = tb_tunnel_alloc_dma(NULL, nhi, port, -1, -1, 15, 11); KUNIT_ASSERT_NOT_NULL(test, tunnel); @@ -2017,7 +2017,7 @@ static void tb_test_tunnel_dma_match(struct kunit *test) KUNIT_ASSERT_FALSE(test, tb_tunnel_match_dma(tunnel, -1, -1, 10, 11)); KUNIT_ASSERT_FALSE(test, tb_tunnel_match_dma(tunnel, 15, 11, -1, -1)); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_credit_alloc_legacy_not_bonded(struct kunit *test) @@ -2050,7 +2050,7 @@ static void tb_test_credit_alloc_legacy_not_bonded(struct kunit *test) KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U); KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 16U); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_credit_alloc_legacy_bonded(struct kunit *test) @@ -2083,7 +2083,7 @@ static void tb_test_credit_alloc_legacy_bonded(struct kunit *test) KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U); KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 32U); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_credit_alloc_pcie(struct kunit *test) @@ -2116,7 +2116,7 @@ static void tb_test_credit_alloc_pcie(struct kunit *test) KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U); KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 64U); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_credit_alloc_without_dp(struct kunit *test) @@ -2166,7 +2166,7 @@ static void tb_test_credit_alloc_without_dp(struct kunit *test) KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U); KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 64U); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_credit_alloc_dp(struct kunit *test) @@ -2182,7 +2182,7 @@ static void tb_test_credit_alloc_dp(struct kunit *test) in = &host->ports[5]; out = &dev->ports[14]; - tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0); + tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_NOT_NULL(test, tunnel); KUNIT_ASSERT_EQ(test, tunnel->npaths, (size_t)3); @@ -2210,7 +2210,7 @@ static void tb_test_credit_alloc_dp(struct kunit *test) KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U); KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 1U); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_credit_alloc_usb3(struct kunit *test) @@ -2243,7 +2243,7 @@ static void tb_test_credit_alloc_usb3(struct kunit *test) KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U); KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 32U); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_credit_alloc_dma(struct kunit *test) @@ -2279,7 +2279,7 @@ static void tb_test_credit_alloc_dma(struct kunit *test) KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U); KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 14U); - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); } static void tb_test_credit_alloc_dma_multiple(struct kunit *test) @@ -2356,7 +2356,7 @@ static void tb_test_credit_alloc_dma_multiple(struct kunit *test) * Release the first DMA tunnel. That should make 14 buffers * available for the next tunnel. */ - tb_tunnel_free(tunnel1); + tb_tunnel_put(tunnel1); tunnel3 = tb_tunnel_alloc_dma(NULL, nhi, port, 10, 3, 10, 3); KUNIT_ASSERT_NOT_NULL(test, tunnel3); @@ -2375,8 +2375,8 @@ static void tb_test_credit_alloc_dma_multiple(struct kunit *test) KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U); KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 14U); - tb_tunnel_free(tunnel3); - tb_tunnel_free(tunnel2); + tb_tunnel_put(tunnel3); + tb_tunnel_put(tunnel2); } static struct tb_tunnel *TB_TEST_PCIE_TUNNEL(struct kunit *test, @@ -2418,7 +2418,7 @@ static struct tb_tunnel *TB_TEST_DP_TUNNEL1(struct kunit *test, in = &host->ports[5]; out = &dev->ports[13]; - dp_tunnel1 = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0); + dp_tunnel1 = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_NOT_NULL(test, dp_tunnel1); KUNIT_ASSERT_EQ(test, dp_tunnel1->npaths, (size_t)3); @@ -2455,7 +2455,7 @@ static struct tb_tunnel *TB_TEST_DP_TUNNEL2(struct kunit *test, in = &host->ports[6]; out = &dev->ports[14]; - dp_tunnel2 = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0); + dp_tunnel2 = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0, NULL, NULL); KUNIT_ASSERT_NOT_NULL(test, dp_tunnel2); KUNIT_ASSERT_EQ(test, dp_tunnel2->npaths, (size_t)3); @@ -2595,12 +2595,12 @@ static void tb_test_credit_alloc_all(struct kunit *test) dma_tunnel1 = TB_TEST_DMA_TUNNEL1(test, host, dev); dma_tunnel2 = TB_TEST_DMA_TUNNEL2(test, host, dev); - tb_tunnel_free(dma_tunnel2); - tb_tunnel_free(dma_tunnel1); - tb_tunnel_free(usb3_tunnel); - tb_tunnel_free(dp_tunnel2); - tb_tunnel_free(dp_tunnel1); - tb_tunnel_free(pcie_tunnel); + tb_tunnel_put(dma_tunnel2); + tb_tunnel_put(dma_tunnel1); + tb_tunnel_put(usb3_tunnel); + tb_tunnel_put(dp_tunnel2); + tb_tunnel_put(dp_tunnel1); + tb_tunnel_put(pcie_tunnel); } static const u32 root_directory[] = { diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c index 41cf637..8229a6f 100644 --- a/drivers/thunderbolt/tunnel.c +++ b/drivers/thunderbolt/tunnel.c @@ -70,6 +70,24 @@ #define USB4_V2_PCI_MIN_BANDWIDTH (1500 * TB_PCI_WEIGHT) #define USB4_V2_USB3_MIN_BANDWIDTH (1500 * TB_USB3_WEIGHT) +/* + * According to VESA spec, the DPRX negotiation shall compete in 5 + * seconds after tunnel is established. Since at least i915 can runtime + * suspend if there is nothing connected, and that it polls any new + * connections every 10 seconds, we use 12 seconds here. + * + * These are in ms. + */ +#define TB_DPRX_TIMEOUT 12000 +#define TB_DPRX_WAIT_TIMEOUT 25 +#define TB_DPRX_POLL_DELAY 50 + +static int dprx_timeout = TB_DPRX_TIMEOUT; +module_param(dprx_timeout, int, 0444); +MODULE_PARM_DESC(dprx_timeout, + "DPRX capability read timeout in ms, -1 waits forever (default: " + __MODULE_STRING(TB_DPRX_TIMEOUT) ")"); + static unsigned int dma_credits = TB_DMA_CREDITS; module_param(dma_credits, uint, 0444); MODULE_PARM_DESC(dma_credits, "specify custom credits for DMA tunnels (default: " @@ -82,6 +100,9 @@ MODULE_PARM_DESC(bw_alloc_mode, static const char * const tb_tunnel_names[] = { "PCI", "DP", "DMA", "USB3" }; +/* Synchronizes kref_get()/put() of struct tb_tunnel */ +static DEFINE_MUTEX(tb_tunnel_lock); + static inline unsigned int tb_usable_credits(const struct tb_port *port) { return port->total_credits - port->ctl_credits; @@ -155,7 +176,7 @@ static struct tb_tunnel *tb_tunnel_alloc(struct tb *tb, size_t npaths, tunnel->paths = kcalloc(npaths, sizeof(tunnel->paths[0]), GFP_KERNEL); if (!tunnel->paths) { - tb_tunnel_free(tunnel); + kfree(tunnel); return NULL; } @@ -163,10 +184,42 @@ static struct tb_tunnel *tb_tunnel_alloc(struct tb *tb, size_t npaths, tunnel->tb = tb; tunnel->npaths = npaths; tunnel->type = type; + kref_init(&tunnel->kref); return tunnel; } +static void tb_tunnel_get(struct tb_tunnel *tunnel) +{ + mutex_lock(&tb_tunnel_lock); + kref_get(&tunnel->kref); + mutex_unlock(&tb_tunnel_lock); +} + +static void tb_tunnel_destroy(struct kref *kref) +{ + struct tb_tunnel *tunnel = container_of(kref, typeof(*tunnel), kref); + int i; + + if (tunnel->destroy) + tunnel->destroy(tunnel); + + for (i = 0; i < tunnel->npaths; i++) { + if (tunnel->paths[i]) + tb_path_free(tunnel->paths[i]); + } + + kfree(tunnel->paths); + kfree(tunnel); +} + +void tb_tunnel_put(struct tb_tunnel *tunnel) +{ + mutex_lock(&tb_tunnel_lock); + kref_put(&tunnel->kref, tb_tunnel_destroy); + mutex_unlock(&tb_tunnel_lock); +} + static int tb_pci_set_ext_encapsulation(struct tb_tunnel *tunnel, bool enable) { struct tb_port *port = tb_upstream_port(tunnel->dst_port->sw); @@ -355,7 +408,7 @@ struct tb_tunnel *tb_tunnel_discover_pci(struct tb *tb, struct tb_port *down, err_deactivate: tb_tunnel_deactivate(tunnel); err_free: - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); return NULL; } @@ -404,7 +457,7 @@ struct tb_tunnel *tb_tunnel_alloc_pci(struct tb *tb, struct tb_port *up, return tunnel; err_free: - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); return NULL; } @@ -851,7 +904,7 @@ static int tb_dp_bandwidth_alloc_mode_enable(struct tb_tunnel *tunnel) return 0; } -static int tb_dp_init(struct tb_tunnel *tunnel) +static int tb_dp_pre_activate(struct tb_tunnel *tunnel) { struct tb_port *in = tunnel->src_port; struct tb_switch *sw = in->sw; @@ -877,7 +930,7 @@ static int tb_dp_init(struct tb_tunnel *tunnel) return tb_dp_bandwidth_alloc_mode_enable(tunnel); } -static void tb_dp_deinit(struct tb_tunnel *tunnel) +static void tb_dp_post_deactivate(struct tb_tunnel *tunnel) { struct tb_port *in = tunnel->src_port; @@ -889,6 +942,90 @@ static void tb_dp_deinit(struct tb_tunnel *tunnel) } } +static ktime_t dprx_timeout_to_ktime(int timeout_msec) +{ + return timeout_msec >= 0 ? + ktime_add_ms(ktime_get(), timeout_msec) : KTIME_MAX; +} + +static int tb_dp_wait_dprx(struct tb_tunnel *tunnel, int timeout_msec) +{ + ktime_t timeout = dprx_timeout_to_ktime(timeout_msec); + struct tb_port *in = tunnel->src_port; + + /* + * Wait for DPRX done. Normally it should be already set for + * active tunnel. + */ + do { + u32 val; + int ret; + + ret = tb_port_read(in, &val, TB_CFG_PORT, + in->cap_adap + DP_COMMON_CAP, 1); + if (ret) + return ret; + + if (val & DP_COMMON_CAP_DPRX_DONE) + return 0; + + usleep_range(100, 150); + } while (ktime_before(ktime_get(), timeout)); + + tb_tunnel_dbg(tunnel, "DPRX read timeout\n"); + return -ETIMEDOUT; +} + +static void tb_dp_dprx_work(struct work_struct *work) +{ + struct tb_tunnel *tunnel = container_of(work, typeof(*tunnel), dprx_work.work); + struct tb *tb = tunnel->tb; + + if (!tunnel->dprx_canceled) { + mutex_lock(&tb->lock); + if (tb_dp_is_usb4(tunnel->src_port->sw) && + tb_dp_wait_dprx(tunnel, TB_DPRX_WAIT_TIMEOUT)) { + if (ktime_before(ktime_get(), tunnel->dprx_timeout)) { + queue_delayed_work(tb->wq, &tunnel->dprx_work, + msecs_to_jiffies(TB_DPRX_POLL_DELAY)); + mutex_unlock(&tb->lock); + return; + } + } else { + tunnel->state = TB_TUNNEL_ACTIVE; + } + mutex_unlock(&tb->lock); + } + + if (tunnel->callback) + tunnel->callback(tunnel, tunnel->callback_data); +} + +static int tb_dp_dprx_start(struct tb_tunnel *tunnel) +{ + /* + * Bump up the reference to keep the tunnel around. It will be + * dropped in tb_dp_dprx_stop() once the tunnel is deactivated. + */ + tb_tunnel_get(tunnel); + + if (tunnel->callback) { + tunnel->dprx_timeout = dprx_timeout_to_ktime(dprx_timeout); + queue_delayed_work(tunnel->tb->wq, &tunnel->dprx_work, 0); + return -EINPROGRESS; + } + + return tb_dp_is_usb4(tunnel->src_port->sw) ? + tb_dp_wait_dprx(tunnel, dprx_timeout) : 0; +} + +static void tb_dp_dprx_stop(struct tb_tunnel *tunnel) +{ + tunnel->dprx_canceled = true; + cancel_delayed_work(&tunnel->dprx_work); + tb_tunnel_put(tunnel); +} + static int tb_dp_activate(struct tb_tunnel *tunnel, bool active) { int ret; @@ -910,6 +1047,7 @@ static int tb_dp_activate(struct tb_tunnel *tunnel, bool active) paths[TB_DP_AUX_PATH_IN]->hops[0].in_hop_index, paths[TB_DP_AUX_PATH_OUT]->hops[last].next_hop_index); } else { + tb_dp_dprx_stop(tunnel); tb_dp_port_hpd_clear(tunnel->src_port); tb_dp_port_set_hops(tunnel->src_port, 0, 0, 0); if (tb_port_is_dpout(tunnel->dst_port)) @@ -920,10 +1058,13 @@ static int tb_dp_activate(struct tb_tunnel *tunnel, bool active) if (ret) return ret; - if (tb_port_is_dpout(tunnel->dst_port)) - return tb_dp_port_enable(tunnel->dst_port, active); + if (tb_port_is_dpout(tunnel->dst_port)) { + ret = tb_dp_port_enable(tunnel->dst_port, active); + if (ret) + return ret; + } - return 0; + return active ? tb_dp_dprx_start(tunnel) : 0; } /** @@ -1076,35 +1217,6 @@ static int tb_dp_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up, return 0; } -static int tb_dp_wait_dprx(struct tb_tunnel *tunnel, int timeout_msec) -{ - ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec); - struct tb_port *in = tunnel->src_port; - - /* - * Wait for DPRX done. Normally it should be already set for - * active tunnel. - */ - do { - u32 val; - int ret; - - ret = tb_port_read(in, &val, TB_CFG_PORT, - in->cap_adap + DP_COMMON_CAP, 1); - if (ret) - return ret; - - if (val & DP_COMMON_CAP_DPRX_DONE) { - tb_tunnel_dbg(tunnel, "DPRX read done\n"); - return 0; - } - usleep_range(100, 150); - } while (ktime_before(ktime_get(), timeout)); - - tb_tunnel_dbg(tunnel, "DPRX read timeout\n"); - return -ETIMEDOUT; -} - /* Read cap from tunnel DP IN */ static int tb_dp_read_cap(struct tb_tunnel *tunnel, unsigned int cap, u32 *rate, u32 *lanes) @@ -1168,32 +1280,39 @@ static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, int ret; if (tb_dp_is_usb4(sw)) { - /* - * On USB4 routers check if the bandwidth allocation - * mode is enabled first and then read the bandwidth - * through those registers. - */ - ret = tb_dp_bandwidth_mode_consumed_bandwidth(tunnel, consumed_up, - consumed_down); - if (ret < 0) { - if (ret != -EOPNOTSUPP) + ret = tb_dp_wait_dprx(tunnel, 0); + if (ret) { + if (ret == -ETIMEDOUT) { + /* + * While we wait for DPRX complete the + * tunnel consumes as much as it had + * been reserved initially. + */ + ret = tb_dp_read_cap(tunnel, DP_REMOTE_CAP, + &rate, &lanes); + if (ret) + return ret; + } else { + return ret; + } + } else { + /* + * On USB4 routers check if the bandwidth allocation + * mode is enabled first and then read the bandwidth + * through those registers. + */ + ret = tb_dp_bandwidth_mode_consumed_bandwidth(tunnel, consumed_up, + consumed_down); + if (ret < 0) { + if (ret != -EOPNOTSUPP) + return ret; + } else if (!ret) { + return 0; + } + ret = tb_dp_read_cap(tunnel, DP_COMMON_CAP, &rate, &lanes); + if (ret) return ret; - } else if (!ret) { - return 0; } - /* - * Then see if the DPRX negotiation is ready and if yes - * return that bandwidth (it may be smaller than the - * reduced one). According to VESA spec, the DPRX - * negotiation shall compete in 5 seconds after tunnel - * established. We give it 100ms extra just in case. - */ - ret = tb_dp_wait_dprx(tunnel, 5100); - if (ret) - return ret; - ret = tb_dp_read_cap(tunnel, DP_COMMON_CAP, &rate, &lanes); - if (ret) - return ret; } else if (sw->generation >= 2) { ret = tb_dp_read_cap(tunnel, DP_REMOTE_CAP, &rate, &lanes); if (ret) @@ -1365,9 +1484,9 @@ struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in, if (!tunnel) return NULL; - tunnel->init = tb_dp_init; - tunnel->deinit = tb_dp_deinit; + tunnel->pre_activate = tb_dp_pre_activate; tunnel->activate = tb_dp_activate; + tunnel->post_deactivate = tb_dp_post_deactivate; tunnel->maximum_bandwidth = tb_dp_maximum_bandwidth; tunnel->allocated_bandwidth = tb_dp_allocated_bandwidth; tunnel->alloc_bandwidth = tb_dp_alloc_bandwidth; @@ -1424,7 +1543,7 @@ struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in, err_deactivate: tb_tunnel_deactivate(tunnel); err_free: - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); return NULL; } @@ -1439,15 +1558,24 @@ err_free: * %0 if no available bandwidth. * @max_down: Maximum available downstream bandwidth for the DP tunnel. * %0 if no available bandwidth. + * @callback: Optional callback that is called when the DP tunnel is + * fully activated (or there is an error) + * @callback_data: Optional data for @callback * * Allocates a tunnel between @in and @out that is capable of tunneling - * Display Port traffic. + * Display Port traffic. If @callback is not %NULL it will be called + * after tb_tunnel_activate() once the tunnel has been fully activated. + * It can call tb_tunnel_is_active() to check if activation was + * successful (or if it returns %false there was some sort of issue). + * The @callback is called without @tb->lock held. * - * Return: Returns a tb_tunnel on success or NULL on failure. + * Return: Returns a tb_tunnel on success or &NULL on failure. */ struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in, struct tb_port *out, int link_nr, - int max_up, int max_down) + int max_up, int max_down, + void (*callback)(struct tb_tunnel *, void *), + void *callback_data) { struct tb_tunnel *tunnel; struct tb_path **paths; @@ -1461,9 +1589,9 @@ struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in, if (!tunnel) return NULL; - tunnel->init = tb_dp_init; - tunnel->deinit = tb_dp_deinit; + tunnel->pre_activate = tb_dp_pre_activate; tunnel->activate = tb_dp_activate; + tunnel->post_deactivate = tb_dp_post_deactivate; tunnel->maximum_bandwidth = tb_dp_maximum_bandwidth; tunnel->allocated_bandwidth = tb_dp_allocated_bandwidth; tunnel->alloc_bandwidth = tb_dp_alloc_bandwidth; @@ -1472,6 +1600,9 @@ struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in, tunnel->dst_port = out; tunnel->max_up = max_up; tunnel->max_down = max_down; + tunnel->callback = callback; + tunnel->callback_data = callback_data; + INIT_DELAYED_WORK(&tunnel->dprx_work, tb_dp_dprx_work); paths = tunnel->paths; pm_support = usb4_switch_version(in->sw) >= 2; @@ -1500,7 +1631,7 @@ struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in, return tunnel; err_free: - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); return NULL; } @@ -1620,7 +1751,7 @@ static void tb_dma_release_credits(struct tb_path_hop *hop) } } -static void tb_dma_deinit_path(struct tb_path *path) +static void tb_dma_destroy_path(struct tb_path *path) { struct tb_path_hop *hop; @@ -1628,14 +1759,14 @@ static void tb_dma_deinit_path(struct tb_path *path) tb_dma_release_credits(hop); } -static void tb_dma_deinit(struct tb_tunnel *tunnel) +static void tb_dma_destroy(struct tb_tunnel *tunnel) { int i; for (i = 0; i < tunnel->npaths; i++) { if (!tunnel->paths[i]) continue; - tb_dma_deinit_path(tunnel->paths[i]); + tb_dma_destroy_path(tunnel->paths[i]); } } @@ -1681,7 +1812,7 @@ struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi, tunnel->src_port = nhi; tunnel->dst_port = dst; - tunnel->deinit = tb_dma_deinit; + tunnel->destroy = tb_dma_destroy; credits = min_not_zero(dma_credits, nhi->sw->max_dma_credits); @@ -1712,7 +1843,7 @@ struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi, return tunnel; err_free: - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); return NULL; } @@ -1793,7 +1924,7 @@ static int tb_usb3_max_link_rate(struct tb_port *up, struct tb_port *down) return min(up_max_rate, down_max_rate); } -static int tb_usb3_init(struct tb_tunnel *tunnel) +static int tb_usb3_pre_activate(struct tb_tunnel *tunnel) { tb_tunnel_dbg(tunnel, "allocating initial bandwidth %d/%d Mb/s\n", tunnel->allocated_up, tunnel->allocated_down); @@ -2024,7 +2155,7 @@ struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down, tb_tunnel_dbg(tunnel, "currently allocated bandwidth %d/%d Mb/s\n", tunnel->allocated_up, tunnel->allocated_down); - tunnel->init = tb_usb3_init; + tunnel->pre_activate = tb_usb3_pre_activate; tunnel->consumed_bandwidth = tb_usb3_consumed_bandwidth; tunnel->release_unused_bandwidth = tb_usb3_release_unused_bandwidth; @@ -2038,7 +2169,7 @@ struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down, err_deactivate: tb_tunnel_deactivate(tunnel); err_free: - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); return NULL; } @@ -2094,7 +2225,7 @@ struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, path = tb_path_alloc(tb, down, TB_USB3_HOPID, up, TB_USB3_HOPID, 0, "USB3 Down"); if (!path) { - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); return NULL; } tb_usb3_init_path(path); @@ -2103,7 +2234,7 @@ struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, path = tb_path_alloc(tb, up, TB_USB3_HOPID, down, TB_USB3_HOPID, 0, "USB3 Up"); if (!path) { - tb_tunnel_free(tunnel); + tb_tunnel_put(tunnel); return NULL; } tb_usb3_init_path(path); @@ -2113,7 +2244,7 @@ struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, tunnel->allocated_up = min(max_rate, max_up); tunnel->allocated_down = min(max_rate, max_down); - tunnel->init = tb_usb3_init; + tunnel->pre_activate = tb_usb3_pre_activate; tunnel->consumed_bandwidth = tb_usb3_consumed_bandwidth; tunnel->release_unused_bandwidth = tb_usb3_release_unused_bandwidth; @@ -2125,31 +2256,6 @@ struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, } /** - * tb_tunnel_free() - free a tunnel - * @tunnel: Tunnel to be freed - * - * Frees a tunnel. The tunnel does not need to be deactivated. - */ -void tb_tunnel_free(struct tb_tunnel *tunnel) -{ - int i; - - if (!tunnel) - return; - - if (tunnel->deinit) - tunnel->deinit(tunnel); - - for (i = 0; i < tunnel->npaths; i++) { - if (tunnel->paths[i]) - tb_path_free(tunnel->paths[i]); - } - - kfree(tunnel->paths); - kfree(tunnel); -} - -/** * tb_tunnel_is_invalid - check whether an activated path is still valid * @tunnel: Tunnel to check */ @@ -2167,12 +2273,15 @@ bool tb_tunnel_is_invalid(struct tb_tunnel *tunnel) } /** - * tb_tunnel_restart() - activate a tunnel after a hardware reset - * @tunnel: Tunnel to restart + * tb_tunnel_activate() - activate a tunnel + * @tunnel: Tunnel to activate * - * Return: 0 on success and negative errno in case if failure + * Return: 0 on success and negative errno in case if failure. + * Specifically returns %-EINPROGRESS if the tunnel activation is still + * in progress (that's for DP tunnels to complete DPRX capabilities + * read). */ -int tb_tunnel_restart(struct tb_tunnel *tunnel) +int tb_tunnel_activate(struct tb_tunnel *tunnel) { int res, i; @@ -2189,8 +2298,10 @@ int tb_tunnel_restart(struct tb_tunnel *tunnel) } } - if (tunnel->init) { - res = tunnel->init(tunnel); + tunnel->state = TB_TUNNEL_ACTIVATING; + + if (tunnel->pre_activate) { + res = tunnel->pre_activate(tunnel); if (res) return res; } @@ -2203,10 +2314,14 @@ int tb_tunnel_restart(struct tb_tunnel *tunnel) if (tunnel->activate) { res = tunnel->activate(tunnel, true); - if (res) + if (res) { + if (res == -EINPROGRESS) + return res; goto err; + } } + tunnel->state = TB_TUNNEL_ACTIVE; return 0; err: @@ -2216,27 +2331,6 @@ err: } /** - * tb_tunnel_activate() - activate a tunnel - * @tunnel: Tunnel to activate - * - * Return: Returns 0 on success or an error code on failure. - */ -int tb_tunnel_activate(struct tb_tunnel *tunnel) -{ - int i; - - for (i = 0; i < tunnel->npaths; i++) { - if (tunnel->paths[i]->activated) { - tb_tunnel_WARN(tunnel, - "trying to activate an already activated tunnel\n"); - return -EINVAL; - } - } - - return tb_tunnel_restart(tunnel); -} - -/** * tb_tunnel_deactivate() - deactivate a tunnel * @tunnel: Tunnel to deactivate */ @@ -2253,6 +2347,11 @@ void tb_tunnel_deactivate(struct tb_tunnel *tunnel) if (tunnel->paths[i] && tunnel->paths[i]->activated) tb_path_deactivate(tunnel->paths[i]); } + + if (tunnel->post_deactivate) + tunnel->post_deactivate(tunnel); + + tunnel->state = TB_TUNNEL_INACTIVE; } /** @@ -2279,18 +2378,10 @@ bool tb_tunnel_port_on_path(const struct tb_tunnel *tunnel, return false; } -static bool tb_tunnel_is_active(const struct tb_tunnel *tunnel) +// Is tb_tunnel_activate() called for the tunnel +static bool tb_tunnel_is_activated(const struct tb_tunnel *tunnel) { - int i; - - for (i = 0; i < tunnel->npaths; i++) { - if (!tunnel->paths[i]) - return false; - if (!tunnel->paths[i]->activated) - return false; - } - - return true; + return tunnel->state == TB_TUNNEL_ACTIVATING || tb_tunnel_is_active(tunnel); } /** @@ -2307,7 +2398,7 @@ int tb_tunnel_maximum_bandwidth(struct tb_tunnel *tunnel, int *max_up, int *max_down) { if (!tb_tunnel_is_active(tunnel)) - return -EINVAL; + return -ENOTCONN; if (tunnel->maximum_bandwidth) return tunnel->maximum_bandwidth(tunnel, max_up, max_down); @@ -2328,7 +2419,7 @@ int tb_tunnel_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up, int *allocated_down) { if (!tb_tunnel_is_active(tunnel)) - return -EINVAL; + return -ENOTCONN; if (tunnel->allocated_bandwidth) return tunnel->allocated_bandwidth(tunnel, allocated_up, @@ -2351,7 +2442,7 @@ int tb_tunnel_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up, int *alloc_down) { if (!tb_tunnel_is_active(tunnel)) - return -EINVAL; + return -ENOTCONN; if (tunnel->alloc_bandwidth) return tunnel->alloc_bandwidth(tunnel, alloc_up, alloc_down); @@ -2376,26 +2467,27 @@ int tb_tunnel_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, { int up_bw = 0, down_bw = 0; - if (!tb_tunnel_is_active(tunnel)) - goto out; - - if (tunnel->consumed_bandwidth) { + /* + * Here we need to distinguish between not active tunnel from + * tunnels that are either fully active or activation started. + * The latter is true for DP tunnels where we must report the + * consumed to be the maximum we gave it until DPRX capabilities + * read is done by the graphics driver. + */ + if (tb_tunnel_is_activated(tunnel) && tunnel->consumed_bandwidth) { int ret; ret = tunnel->consumed_bandwidth(tunnel, &up_bw, &down_bw); if (ret) return ret; - - tb_tunnel_dbg(tunnel, "consumed bandwidth %d/%d Mb/s\n", up_bw, - down_bw); } -out: if (consumed_up) *consumed_up = up_bw; if (consumed_down) *consumed_down = down_bw; + tb_tunnel_dbg(tunnel, "consumed bandwidth %d/%d Mb/s\n", up_bw, down_bw); return 0; } @@ -2411,7 +2503,7 @@ out: int tb_tunnel_release_unused_bandwidth(struct tb_tunnel *tunnel) { if (!tb_tunnel_is_active(tunnel)) - return 0; + return -ENOTCONN; if (tunnel->release_unused_bandwidth) { int ret; diff --git a/drivers/thunderbolt/tunnel.h b/drivers/thunderbolt/tunnel.h index 1a27ccd..7f6d3a1 100644 --- a/drivers/thunderbolt/tunnel.h +++ b/drivers/thunderbolt/tunnel.h @@ -19,16 +19,33 @@ enum tb_tunnel_type { }; /** + * enum tb_tunnel_state - State of a tunnel + * @TB_TUNNEL_INACTIVE: tb_tunnel_activate() is not called for the tunnel + * @TB_TUNNEL_ACTIVATING: tb_tunnel_activate() returned successfully for the tunnel + * @TB_TUNNEL_ACTIVE: The tunnel is fully active + */ +enum tb_tunnel_state { + TB_TUNNEL_INACTIVE, + TB_TUNNEL_ACTIVATING, + TB_TUNNEL_ACTIVE, +}; + +/** * struct tb_tunnel - Tunnel between two ports + * @kref: Reference count * @tb: Pointer to the domain * @src_port: Source port of the tunnel * @dst_port: Destination port of the tunnel. For discovered incomplete * tunnels may be %NULL or null adapter port instead. * @paths: All paths required by the tunnel * @npaths: Number of paths in @paths - * @init: Optional tunnel specific initialization - * @deinit: Optional tunnel specific de-initialization + * @pre_activate: Optional tunnel specific initialization called before + * activation. Can touch hardware. * @activate: Optional tunnel specific activation/deactivation + * @post_deactivate: Optional tunnel specific de-initialization called + * after deactivation. Can touch hardware. + * @destroy: Optional tunnel specific callback called when the tunnel + * memory is being released. Should not touch hardware. * @maximum_bandwidth: Returns maximum possible bandwidth for this tunnel * @allocated_bandwidth: Return how much bandwidth is allocated for the tunnel * @alloc_bandwidth: Change tunnel bandwidth allocation @@ -37,6 +54,7 @@ enum tb_tunnel_type { * @reclaim_available_bandwidth: Reclaim back available bandwidth * @list: Tunnels are linked using this field * @type: Type of the tunnel + * @state: Current state of the tunnel * @max_up: Maximum upstream bandwidth (Mb/s) available for the tunnel. * Only set if the bandwidth needs to be limited. * @max_down: Maximum downstream bandwidth (Mb/s) available for the tunnel. @@ -45,16 +63,23 @@ enum tb_tunnel_type { * @allocated_down: Allocated downstream bandwidth (only for USB3) * @bw_mode: DP bandwidth allocation mode registers can be used to * determine consumed and allocated bandwidth + * @dprx_canceled: Was DPRX capabilities read poll canceled + * @dprx_timeout: If set DPRX capabilities read poll work will timeout after this passes + * @dprx_work: Worker that is scheduled to poll completion of DPRX capabilities read + * @callback: Optional callback called when DP tunnel is fully activated + * @callback_data: Optional data for @callback */ struct tb_tunnel { + struct kref kref; struct tb *tb; struct tb_port *src_port; struct tb_port *dst_port; struct tb_path **paths; size_t npaths; - int (*init)(struct tb_tunnel *tunnel); - void (*deinit)(struct tb_tunnel *tunnel); + int (*pre_activate)(struct tb_tunnel *tunnel); int (*activate)(struct tb_tunnel *tunnel, bool activate); + void (*post_deactivate)(struct tb_tunnel *tunnel); + void (*destroy)(struct tb_tunnel *tunnel); int (*maximum_bandwidth)(struct tb_tunnel *tunnel, int *max_up, int *max_down); int (*allocated_bandwidth)(struct tb_tunnel *tunnel, int *allocated_up, @@ -69,11 +94,17 @@ struct tb_tunnel { int *available_down); struct list_head list; enum tb_tunnel_type type; + enum tb_tunnel_state state; int max_up; int max_down; int allocated_up; int allocated_down; bool bw_mode; + bool dprx_canceled; + ktime_t dprx_timeout; + struct delayed_work dprx_work; + void (*callback)(struct tb_tunnel *tunnel, void *data); + void *callback_data; }; struct tb_tunnel *tb_tunnel_discover_pci(struct tb *tb, struct tb_port *down, @@ -86,7 +117,9 @@ struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in, bool alloc_hopid); struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in, struct tb_port *out, int link_nr, - int max_up, int max_down); + int max_up, int max_down, + void (*callback)(struct tb_tunnel *, void *), + void *callback_data); struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi, struct tb_port *dst, int transmit_path, int transmit_ring, int receive_path, @@ -99,10 +132,24 @@ struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, struct tb_port *down, int max_up, int max_down); -void tb_tunnel_free(struct tb_tunnel *tunnel); +void tb_tunnel_put(struct tb_tunnel *tunnel); int tb_tunnel_activate(struct tb_tunnel *tunnel); -int tb_tunnel_restart(struct tb_tunnel *tunnel); void tb_tunnel_deactivate(struct tb_tunnel *tunnel); + +/** + * tb_tunnel_is_active() - Is tunnel fully activated + * @tunnel: Tunnel to check + * + * Returns %true if @tunnel is fully activated. For other than DP + * tunnels this is pretty much once tb_tunnel_activate() returns + * successfully. However, for DP tunnels this returns %true only once the + * DPRX capabilities read has been issued successfully. + */ +static inline bool tb_tunnel_is_active(const struct tb_tunnel *tunnel) +{ + return tunnel->state == TB_TUNNEL_ACTIVE; +} + bool tb_tunnel_is_invalid(struct tb_tunnel *tunnel); bool tb_tunnel_port_on_path(const struct tb_tunnel *tunnel, const struct tb_port *port); diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c index 4a3f0f9..97edf76 100644 --- a/drivers/usb/cdns3/cdnsp-gadget.c +++ b/drivers/usb/cdns3/cdnsp-gadget.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -1671,12 +1672,12 @@ static int cdnsp_gadget_init_endpoints(struct cdnsp_device *pdev) "CTRL: %s, INT: %s, BULK: %s, ISOC %s, " "SupDir IN: %s, OUT: %s\n", pep->name, 1024, - (pep->endpoint.caps.type_control) ? "yes" : "no", - (pep->endpoint.caps.type_int) ? "yes" : "no", - (pep->endpoint.caps.type_bulk) ? "yes" : "no", - (pep->endpoint.caps.type_iso) ? "yes" : "no", - (pep->endpoint.caps.dir_in) ? "yes" : "no", - (pep->endpoint.caps.dir_out) ? "yes" : "no"); + str_yes_no(pep->endpoint.caps.type_control), + str_yes_no(pep->endpoint.caps.type_int), + str_yes_no(pep->endpoint.caps.type_bulk), + str_yes_no(pep->endpoint.caps.type_iso), + str_yes_no(pep->endpoint.caps.dir_in), + str_yes_no(pep->endpoint.caps.dir_out)); INIT_LIST_HEAD(&pep->pending_list); } diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c index 465e926..98980a2 100644 --- a/drivers/usb/cdns3/core.c +++ b/drivers/usb/cdns3/core.c @@ -529,9 +529,7 @@ int cdns_resume(struct cdns *cdns) int ret = 0; if (cdns_power_is_lost(cdns)) { - if (cdns->role_sw) { - cdns->role = cdns_role_get(cdns->role_sw); - } else { + if (!cdns->role_sw) { real_role = cdns_hw_role_state_machine(cdns); if (real_role != cdns->role) { ret = cdns_hw_role_switch(cdns); diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 0cce192..ced6076 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include "../host/ehci.h" @@ -56,7 +57,7 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) if (ret) { dev_err(dev, "Failed to %s vbus regulator, ret=%d\n", - enable ? "enable" : "disable", ret); + str_enable_disable(enable), ret); return ret; } priv->enabled = enable; @@ -256,8 +257,14 @@ static int ci_ehci_hub_control( struct device *dev = hcd->self.controller; struct ci_hdrc *ci = dev_get_drvdata(dev); - port_index = wIndex & 0xff; - port_index -= (port_index > 0); + /* + * Avoid out-of-bounds values while calculating the port index + * from wIndex. The compiler doesn't like pointers to invalid + * addresses, even if they are never used. + */ + port_index = (wIndex - 1) & 0xff; + if (port_index >= HCS_N_PORTS_MAX) + port_index = 0; status_reg = &ehci->regs->port_status[port_index]; spin_lock_irqsave(&ehci->lock, flags); diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index ff1a941..e2527fa 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -87,7 +87,7 @@ /* Get two-int array: [0]=vendor ID, [1]=product ID: */ #define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len) /* Perform class specific soft reset */ -#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0); +#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0) /* * A DEVICE_ID string may include the printer's serial number. diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c index 871cf19..fc0845f 100644 --- a/drivers/usb/common/common.c +++ b/drivers/usb/common/common.c @@ -41,6 +41,12 @@ const char *usb_ep_type_string(int ep_type) } EXPORT_SYMBOL_GPL(usb_ep_type_string); +/** + * usb_otg_state_string() - returns human readable name of OTG state. + * @state: the OTG state to return the human readable name of. If it's not + * any of the states defined in usb_otg_state enum, 'UNDEFINED' will be + * returned. + */ const char *usb_otg_state_string(enum usb_otg_state state) { static const char *const names[] = { @@ -179,6 +185,14 @@ static const char *const usb_dr_modes[] = { [USB_DR_MODE_OTG] = "otg", }; +/** + * usb_get_dr_mode_from_string() - Get dual role mode for given string + * @str: String to find the corresponding dual role mode for + * + * This function performs a lookup for the given string and returns the + * corresponding enum usb_dr_mode. If no match for the string could be found, + * 'USB_DR_MODE_UNKNOWN' is returned. + */ static enum usb_dr_mode usb_get_dr_mode_from_string(const char *str) { int ret; diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c index c84b4a7..aa710b5 100644 --- a/drivers/usb/common/usb-conn-gpio.c +++ b/drivers/usb/common/usb-conn-gpio.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #define USB_GPIO_DEB_MS 20 /* ms */ @@ -111,7 +112,7 @@ static void usb_conn_detect_cable(struct work_struct *work) if (info->vbus) dev_dbg(info->dev, "vbus regulator is %s\n", - regulator_is_enabled(info->vbus) ? "enabled" : "disabled"); + str_enabled_disabled(regulator_is_enabled(info->vbus))); power_supply_changed(info->charger); } diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 25a00f9..f7bf8d1 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include "usb.h" @@ -18,12 +19,6 @@ #define USB_MAXCONFIG 8 /* Arbitrary limit */ - -static inline const char *plural(int n) -{ - return (n == 1 ? "" : "s"); -} - static int find_next_descriptor(unsigned char *buffer, int size, int dt1, int dt2, int *num_skipped) { @@ -484,7 +479,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, retval = buffer - buffer0 + i; if (n > 0) dev_dbg(ddev, "skipped %d descriptor%s after %s\n", - n, plural(n), "endpoint"); + n, str_plural(n), "endpoint"); return retval; skip_to_next_endpoint_or_interface_descriptor: @@ -563,7 +558,7 @@ static int usb_parse_interface(struct device *ddev, int cfgno, alt->extralen = i; if (n > 0) dev_dbg(ddev, "skipped %d descriptor%s after %s\n", - n, plural(n), "interface"); + n, str_plural(n), "interface"); buffer += i; size -= i; @@ -605,7 +600,7 @@ static int usb_parse_interface(struct device *ddev, int cfgno, dev_notice(ddev, "config %d interface %d altsetting %d has %d " "endpoint descriptor%s, different from the interface " "descriptor's value: %d\n", - cfgno, inum, asnum, n, plural(n), num_ep_orig); + cfgno, inum, asnum, n, str_plural(n), num_ep_orig); return buffer - buffer0; skip_to_next_interface_descriptor: @@ -664,7 +659,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx, if (size2 < sizeof(struct usb_descriptor_header)) { dev_notice(ddev, "config %d descriptor has %d excess " "byte%s, ignoring\n", - cfgno, size2, plural(size2)); + cfgno, size2, str_plural(size2)); break; } @@ -754,7 +749,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx, if (n != nintf) dev_notice(ddev, "config %d has %d interface%s, different from " "the descriptor's value: %d\n", - cfgno, n, plural(n), nintf_orig); + cfgno, n, str_plural(n), nintf_orig); else if (n == 0) dev_notice(ddev, "config %d has no interfaces?\n", cfgno); config->desc.bNumInterfaces = nintf = n; @@ -798,7 +793,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx, config->extralen = i; if (n > 0) dev_dbg(ddev, "skipped %d descriptor%s after %s\n", - n, plural(n), "configuration"); + n, str_plural(n), "configuration"); buffer += i; size -= i; diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index f203fdb..460d4dd 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1086,15 +1086,14 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner, pr_info("%s: registered new interface driver %s\n", usbcore_name, new_driver->name); -out: - return retval; + return 0; out_newid: driver_unregister(&new_driver->driver); - +out: pr_err("%s: error %d registering interface driver %s\n", usbcore_name, retval, new_driver->name); - goto out; + return retval; } EXPORT_SYMBOL_GPL(usb_register_driver); diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index b134bff..9c6ae5e 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -21,14 +21,10 @@ #include #include +#include #include #include "usb.h" -static inline const char *plural(int n) -{ - return (n == 1 ? "" : "s"); -} - static int is_rndis(struct usb_interface_descriptor *desc) { return desc->bInterfaceClass == USB_CLASS_COMM @@ -194,18 +190,18 @@ int usb_choose_configuration(struct usb_device *udev) if (insufficient_power > 0) dev_info(&udev->dev, "rejected %d configuration%s " "due to insufficient available bus power\n", - insufficient_power, plural(insufficient_power)); + insufficient_power, str_plural(insufficient_power)); if (best) { i = best->desc.bConfigurationValue; dev_dbg(&udev->dev, "configuration #%d chosen from %d choice%s\n", - i, num_configs, plural(num_configs)); + i, num_configs, str_plural(num_configs)); } else { i = -1; dev_warn(&udev->dev, "no configuration chosen from %d choice%s\n", - num_configs, plural(num_configs)); + num_configs, str_plural(num_configs)); } return i; } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index a08f3f2..56b534f 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -422,7 +422,12 @@ static int suspend_common(struct device *dev, pm_message_t msg) bool do_wakeup; int retval; - do_wakeup = PMSG_IS_AUTO(msg) ? true : device_may_wakeup(dev); + if (PMSG_IS_AUTO(msg)) + do_wakeup = true; + else if (PMSG_NO_WAKEUP(msg)) + do_wakeup = false; + else + do_wakeup = device_may_wakeup(dev); /* Root hub suspend should have stopped all downstream traffic, * and all bus master traffic. And done so for both the interface @@ -521,6 +526,11 @@ static int hcd_pci_suspend(struct device *dev) return suspend_common(dev, PMSG_SUSPEND); } +static int hcd_pci_freeze(struct device *dev) +{ + return suspend_common(dev, PMSG_FREEZE); +} + static int hcd_pci_suspend_noirq(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); @@ -590,6 +600,7 @@ static int hcd_pci_restore(struct device *dev) #else #define hcd_pci_suspend NULL +#define hcd_pci_freeze NULL #define hcd_pci_suspend_noirq NULL #define hcd_pci_poweroff_late NULL #define hcd_pci_resume_noirq NULL @@ -624,7 +635,7 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = { .suspend_noirq = hcd_pci_suspend_noirq, .resume_noirq = hcd_pci_resume_noirq, .resume = hcd_pci_resume, - .freeze = hcd_pci_suspend, + .freeze = hcd_pci_freeze, .freeze_noirq = check_root_hub_suspended, .thaw_noirq = NULL, .thaw = hcd_pci_resume, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 0b24903..a75cf1f 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -415,7 +415,7 @@ ascii2desc(char const *s, u8 *buf, unsigned len) static unsigned rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len) { - char buf[100]; + char buf[160]; char const *s; static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04}; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 21ac9b4..c3f8396 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -1496,7 +1497,7 @@ static int hub_configure(struct usb_hub *hub, maxchild = hub->descriptor->bNbrPorts; dev_info(hub_dev, "%d port%s detected\n", maxchild, - (maxchild == 1) ? "" : "s"); + str_plural(maxchild)); hub->ports = kcalloc(maxchild, sizeof(struct usb_port *), GFP_KERNEL); if (!hub->ports) { @@ -4139,14 +4140,14 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev, break; default: dev_warn(&udev->dev, "%s: Can't %s non-U1 or U2 state.\n", - __func__, enable ? "enable" : "disable"); + __func__, str_enable_disable(enable)); return -EINVAL; } if (udev->state != USB_STATE_CONFIGURED) { dev_dbg(&udev->dev, "%s: Can't %s %s state " "for unconfigured device.\n", - __func__, enable ? "enable" : "disable", + __func__, str_enable_disable(enable), usb3_lpm_names[state]); return 0; } @@ -4172,8 +4173,7 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev, } if (ret < 0) { dev_warn(&udev->dev, "%s of device-initiated %s failed.\n", - enable ? "Enable" : "Disable", - usb3_lpm_names[state]); + str_enable_disable(enable), usb3_lpm_names[state]); return -EBUSY; } return 0; diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index e857e53..f541981 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -9,6 +9,7 @@ #include #include +#include #include #include #include @@ -25,7 +26,7 @@ static ssize_t early_stop_show(struct device *dev, { struct usb_port *port_dev = to_usb_port(dev); - return sysfs_emit(buf, "%s\n", port_dev->early_stop ? "yes" : "no"); + return sysfs_emit(buf, "%s\n", str_yes_no(port_dev->early_stop)); } static ssize_t early_stop_store(struct device *dev, struct device_attribute *attr, diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 1317145..67732c7 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -394,6 +394,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Kingston DataTraveler 3.0 */ { USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM }, + /* TOSHIBA TransMemory-Mx */ + { USB_DEVICE(0x0930, 0x1408), .driver_info = USB_QUIRK_NO_LPM }, + /* NVIDIA Jetson devices in Force Recovery mode */ { USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME }, { USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index b4cba23..23f3cb1 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -854,7 +854,7 @@ static const struct attribute_group dev_string_attr_grp = { static ssize_t descriptors_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, + const struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct device *dev = kobj_to_dev(kobj); @@ -890,11 +890,11 @@ descriptors_read(struct file *filp, struct kobject *kobj, } return count - nleft; } -static BIN_ATTR_RO(descriptors, 18 + 65535); /* dev descr + max-size raw descriptor */ +static const BIN_ATTR_RO(descriptors, 18 + 65535); /* dev descr + max-size raw descriptor */ static ssize_t bos_descriptors_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, + const struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct device *dev = kobj_to_dev(kobj); @@ -913,12 +913,12 @@ bos_descriptors_read(struct file *filp, struct kobject *kobj, } return n; } -static BIN_ATTR_RO(bos_descriptors, 65535); /* max-size BOS */ +static const BIN_ATTR_RO(bos_descriptors, 65535); /* max-size BOS */ /* When modifying this list, be sure to modify dev_bin_attrs_are_visible() * accordingly. */ -static struct bin_attribute *dev_bin_attrs[] = { +static const struct bin_attribute *const dev_bin_attrs[] = { &bin_attr_descriptors, &bin_attr_bos_descriptors, NULL @@ -944,7 +944,7 @@ static umode_t dev_bin_attrs_are_visible(struct kobject *kobj, } static const struct attribute_group dev_bin_attr_grp = { - .bin_attrs = dev_bin_attrs, + .bin_attrs_new = dev_bin_attrs, .is_bin_visible = dev_bin_attrs_are_visible, }; diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f219c82..dfa1b5f 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1479,6 +1479,26 @@ static int dwc3_core_init(struct dwc3 *dwc) } } + /* + * STAR 9001346572: This issue affects DWC_usb31 versions 1.80a and + * prior. When an active endpoint not currently cached in the host + * controller is chosen to be cached to the same index as an endpoint + * receiving NAKs, the endpoint receiving NAKs enters continuous + * retry mode. This prevents it from being evicted from the host + * controller cache, blocking the new endpoint from being cached and + * serviced. + * + * To resolve this, for controller versions 1.70a and 1.80a, set the + * GUCTL3 bit[16] (USB2.0 Internal Retry Disable) to 1. This bit + * disables the USB2.0 internal retry feature. The GUCTL3[16] register + * function is available only from version 1.70a. + */ + if (DWC3_VER_IS_WITHIN(DWC31, 170A, 180A)) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL3); + reg |= DWC3_GUCTL3_USB20_RETRY_DISABLE; + dwc3_writel(dwc->regs, DWC3_GUCTL3, reg); + } + return 0; err_power_off_phy: @@ -1664,8 +1684,6 @@ static void dwc3_get_properties(struct dwc3 *dwc) u8 tx_thr_num_pkt_prd = 0; u8 tx_max_burst_prd = 0; u8 tx_fifo_resize_max_num; - const char *usb_psy_name; - int ret; /* default to highest possible threshold */ lpm_nyet_threshold = 0xf; @@ -1700,13 +1718,6 @@ static void dwc3_get_properties(struct dwc3 *dwc) dwc->sys_wakeup = device_may_wakeup(dwc->sysdev); - ret = device_property_read_string(dev, "usb-psy-name", &usb_psy_name); - if (ret >= 0) { - dwc->usb_psy = power_supply_get_by_name(usb_psy_name); - if (!dwc->usb_psy) - dev_err(dev, "couldn't get usb power supply\n"); - } - dwc->has_lpm_erratum = device_property_read_bool(dev, "snps,has-lpm-erratum"); device_property_read_u8(dev, "snps,lpm-nyet-threshold", @@ -2109,6 +2120,23 @@ static int dwc3_get_num_ports(struct dwc3 *dwc) return 0; } +static struct power_supply *dwc3_get_usb_power_supply(struct dwc3 *dwc) +{ + struct power_supply *usb_psy; + const char *usb_psy_name; + int ret; + + ret = device_property_read_string(dwc->dev, "usb-psy-name", &usb_psy_name); + if (ret < 0) + return NULL; + + usb_psy = power_supply_get_by_name(usb_psy_name); + if (!usb_psy) + return ERR_PTR(-EPROBE_DEFER); + + return usb_psy; +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -2165,6 +2193,10 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_get_software_properties(dwc); + dwc->usb_psy = dwc3_get_usb_power_supply(dwc); + if (IS_ERR(dwc->usb_psy)) + return dev_err_probe(dev, PTR_ERR(dwc->usb_psy), "couldn't get usb power supply\n"); + dwc->reset = devm_reset_control_array_get_optional_shared(dev); if (IS_ERR(dwc->reset)) { ret = PTR_ERR(dwc->reset); @@ -2589,12 +2621,15 @@ static int dwc3_resume(struct device *dev) pinctrl_pm_select_default_state(dev); pm_runtime_disable(dev); - pm_runtime_set_active(dev); + ret = pm_runtime_set_active(dev); + if (ret) + goto out; ret = dwc3_resume_common(dwc, PMSG_RESUME); if (ret) pm_runtime_set_suspended(dev); +out: pm_runtime_enable(dev); return ret; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index f11570c..ac7c730 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -425,6 +425,7 @@ /* Global User Control Register 3 */ #define DWC3_GUCTL3_SPLITDISABLE BIT(14) +#define DWC3_GUCTL3_USB20_RETRY_DISABLE BIT(16) /* Device Configuration Register */ #define DWC3_DCFG_NUMLANES(n) (((n) & 0x3) << 30) /* DWC_usb32 only */ @@ -742,6 +743,7 @@ struct dwc3_event_buffer { */ struct dwc3_ep { struct usb_ep endpoint; + struct delayed_work nostream_work; struct list_head cancelled_list; struct list_head pending_list; struct list_head started_list; @@ -764,7 +766,7 @@ struct dwc3_ep { #define DWC3_EP_WAIT_TRANSFER_COMPLETE BIT(7) #define DWC3_EP_IGNORE_NEXT_NOSTREAM BIT(8) #define DWC3_EP_FORCE_RESTART_STREAM BIT(9) -#define DWC3_EP_FIRST_STREAM_PRIMED BIT(10) +#define DWC3_EP_STREAM_PRIMED BIT(10) #define DWC3_EP_PENDING_CLEAR_STALL BIT(11) #define DWC3_EP_TXFIFO_RESIZED BIT(12) #define DWC3_EP_DELAY_STOP BIT(13) @@ -957,7 +959,6 @@ struct dwc3_request { struct usb_request request; struct list_head list; struct dwc3_ep *dep; - struct scatterlist *sg; struct scatterlist *start_sg; unsigned int num_pending_sgs; diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c index 7d43da5..c158364 100644 --- a/drivers/usb/dwc3/dwc3-am62.c +++ b/drivers/usb/dwc3/dwc3-am62.c @@ -108,6 +108,9 @@ #define DWC3_AM62_AUTOSUSPEND_DELAY 100 +#define USBSS_DEBUG_CFG_OFF 0x0 +#define USBSS_DEBUG_CFG_DISABLED 0x7 + struct dwc3_am62 { struct device *dev; void __iomem *usbss; @@ -117,6 +120,7 @@ struct dwc3_am62 { unsigned int offset; unsigned int vbus_divider; u32 wakeup_stat; + void __iomem *phy_regs; }; static const int dwc3_ti_rate_table[] = { /* in KHZ */ @@ -166,6 +170,7 @@ static int phy_syscon_pll_refclk(struct dwc3_am62 *am62) if (ret) return ret; + of_node_put(args.np); am62->offset = args.args[0]; /* Core voltage. PHY_CORE_VOLTAGE bit Recommended to be 0 always */ @@ -184,15 +189,47 @@ static int phy_syscon_pll_refclk(struct dwc3_am62 *am62) return 0; } +static int dwc3_ti_init(struct dwc3_am62 *am62) +{ + int ret; + u32 reg; + + /* Read the syscon property and set the rate code */ + ret = phy_syscon_pll_refclk(am62); + if (ret) + return ret; + + /* Workaround Errata i2409 */ + if (am62->phy_regs) { + reg = readl(am62->phy_regs + USB_PHY_PLL_REG12); + reg |= USB_PHY_PLL_LDO_REF_EN | USB_PHY_PLL_LDO_REF_EN_EN; + writel(reg, am62->phy_regs + USB_PHY_PLL_REG12); + } + + /* VBUS divider select */ + reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG); + if (am62->vbus_divider) + reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT; + + dwc3_ti_writel(am62, USBSS_PHY_CONFIG, reg); + + clk_prepare_enable(am62->usb2_refclk); + + /* Set mode valid bit to indicate role is valid */ + reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL); + reg |= USBSS_MODE_VALID; + dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg); + + return 0; +} + static int dwc3_ti_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = pdev->dev.of_node; struct dwc3_am62 *am62; unsigned long rate; - void __iomem *phy; int i, ret; - u32 reg; am62 = devm_kzalloc(dev, sizeof(*am62), GFP_KERNEL); if (!am62) @@ -228,29 +265,17 @@ static int dwc3_ti_probe(struct platform_device *pdev) am62->rate_code = i; - /* Read the syscon property and set the rate code */ - ret = phy_syscon_pll_refclk(am62); - if (ret) - return ret; - - /* Workaround Errata i2409 */ - phy = devm_platform_ioremap_resource(pdev, 1); - if (IS_ERR(phy)) { + am62->phy_regs = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(am62->phy_regs)) { dev_err(dev, "can't map PHY IOMEM resource. Won't apply i2409 fix.\n"); - phy = NULL; - } else { - reg = readl(phy + USB_PHY_PLL_REG12); - reg |= USB_PHY_PLL_LDO_REF_EN | USB_PHY_PLL_LDO_REF_EN_EN; - writel(reg, phy + USB_PHY_PLL_REG12); + am62->phy_regs = NULL; } - /* VBUS divider select */ am62->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider"); - reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG); - if (am62->vbus_divider) - reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT; - dwc3_ti_writel(am62, USBSS_PHY_CONFIG, reg); + ret = dwc3_ti_init(am62); + if (ret) + return ret; pm_runtime_set_active(dev); pm_runtime_enable(dev); @@ -258,7 +283,6 @@ static int dwc3_ti_probe(struct platform_device *pdev) * Don't ignore its dependencies with its children */ pm_suspend_ignore_children(dev, false); - clk_prepare_enable(am62->usb2_refclk); pm_runtime_get_noresume(dev); ret = of_platform_populate(node, NULL, NULL, dev); @@ -267,11 +291,6 @@ static int dwc3_ti_probe(struct platform_device *pdev) goto err_pm_disable; } - /* Set mode valid bit to indicate role is valid */ - reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL); - reg |= USBSS_MODE_VALID; - dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg); - /* Device has capability to wakeup system from sleep */ device_set_wakeup_capable(dev, true); ret = device_wakeup_enable(dev); @@ -339,6 +358,9 @@ static int dwc3_ti_suspend_common(struct device *dev) dwc3_ti_writel(am62, USBSS_WAKEUP_STAT, USBSS_WAKEUP_STAT_CLR); } + /* just to track if module resets on suspend */ + dwc3_ti_writel(am62, USBSS_DEBUG_CFG, USBSS_DEBUG_CFG_DISABLED); + clk_disable_unprepare(am62->usb2_refclk); return 0; @@ -349,7 +371,14 @@ static int dwc3_ti_resume_common(struct device *dev) struct dwc3_am62 *am62 = dev_get_drvdata(dev); u32 reg; - clk_prepare_enable(am62->usb2_refclk); + reg = dwc3_ti_readl(am62, USBSS_DEBUG_CFG); + if (reg != USBSS_DEBUG_CFG_DISABLED) { + /* lost power/context */ + dwc3_ti_init(am62); + } else { + dwc3_ti_writel(am62, USBSS_DEBUG_CFG, USBSS_DEBUG_CFG_OFF); + clk_prepare_enable(am62->usb2_refclk); + } if (device_may_wakeup(dev)) { /* Clear wakeup config enable bits */ diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index b261c46..fe74d11 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -457,7 +457,7 @@ static int dwc3_omap_probe(struct platform_device *pdev) struct dwc3_omap *omap; struct device *dev = &pdev->dev; - struct regulator *vbus_reg = NULL; + struct regulator *vbus_reg; int ret; int irq; @@ -483,12 +483,11 @@ static int dwc3_omap_probe(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base); - if (of_property_read_bool(node, "vbus-supply")) { - vbus_reg = devm_regulator_get(dev, "vbus"); - if (IS_ERR(vbus_reg)) { - dev_err(dev, "vbus init failed\n"); - return PTR_ERR(vbus_reg); - } + vbus_reg = devm_regulator_get_optional(dev, "vbus"); + if (IS_ERR(vbus_reg)) { + if (PTR_ERR(vbus_reg) != -ENODEV) + return dev_err_probe(dev, PTR_ERR(vbus_reg), "vbus init failed\n"); + vbus_reg = NULL; } omap->dev = dev; diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index e16c323..ef7c430 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -309,7 +309,6 @@ static void st_dwc3_remove(struct platform_device *pdev) reset_control_assert(dwc3_data->rstc_rst); } -#ifdef CONFIG_PM_SLEEP static int st_dwc3_suspend(struct device *dev) { struct st_dwc3 *dwc3_data = dev_get_drvdata(dev); @@ -343,9 +342,8 @@ static int st_dwc3_resume(struct device *dev) return 0; } -#endif /* CONFIG_PM_SLEEP */ -static SIMPLE_DEV_PM_OPS(st_dwc3_dev_pm_ops, st_dwc3_suspend, st_dwc3_resume); +static DEFINE_SIMPLE_DEV_PM_OPS(st_dwc3_dev_pm_ops, st_dwc3_suspend, st_dwc3_resume); static const struct of_device_id st_dwc3_match[] = { { .compatible = "st,stih407-dwc3" }, @@ -360,7 +358,7 @@ static struct platform_driver st_dwc3_driver = { .driver = { .name = "usb-st-dwc3", .of_match_table = st_dwc3_match, - .pm = &st_dwc3_dev_pm_ops, + .pm = pm_sleep_ptr(&st_dwc3_dev_pm_ops), }, }; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 31a654c..d27af65 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -996,8 +996,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) /* * All stream eps will reinitiate stream on NoStream - * rejection until we can determine that the host can - * prime after the first transfer. + * rejection. * * However, if the controller is capable of * TXF_FLUSH_BYPASS, then IN direction endpoints will @@ -2740,6 +2739,8 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) __dwc3_gadget_stop(dwc); spin_unlock_irqrestore(&dwc->lock, flags); + usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED); + return ret; } @@ -3298,6 +3299,50 @@ static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep) return dwc3_alloc_trb_pool(dep); } +#define nostream_work_to_dep(w) (container_of(to_delayed_work(w), struct dwc3_ep, nostream_work)) +static void dwc3_nostream_work(struct work_struct *work) +{ + struct dwc3_ep *dep = nostream_work_to_dep(work); + struct dwc3 *dwc = dep->dwc; + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + if (dep->flags & DWC3_EP_STREAM_PRIMED) + goto out; + + if ((dep->flags & DWC3_EP_IGNORE_NEXT_NOSTREAM) || + (!DWC3_MST_CAPABLE(&dwc->hwparams) && + !(dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE))) + goto out; + /* + * If the host rejects a stream due to no active stream, by the + * USB and xHCI spec, the endpoint will be put back to idle + * state. When the host is ready (buffer added/updated), it will + * prime the endpoint to inform the usb device controller. This + * triggers the device controller to issue ERDY to restart the + * stream. However, some hosts don't follow this and keep the + * endpoint in the idle state. No prime will come despite host + * streams are updated, and the device controller will not be + * triggered to generate ERDY to move the next stream data. To + * workaround this and maintain compatibility with various + * hosts, force to reinitiate the stream until the host is ready + * instead of waiting for the host to prime the endpoint. + */ + if (DWC3_VER_IS_WITHIN(DWC32, 100A, ANY)) { + unsigned int cmd = DWC3_DGCMD_SET_ENDPOINT_PRIME; + + dwc3_send_gadget_generic_command(dwc, cmd, dep->number); + } else { + dep->flags |= DWC3_EP_DELAY_START; + dwc3_stop_active_transfer(dep, true, true); + spin_unlock_irqrestore(&dwc->lock, flags); + return; + } +out: + dep->flags &= ~DWC3_EP_IGNORE_NEXT_NOSTREAM; + spin_unlock_irqrestore(&dwc->lock, flags); +} + static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) { struct dwc3_ep *dep; @@ -3343,6 +3388,7 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) INIT_LIST_HEAD(&dep->pending_list); INIT_LIST_HEAD(&dep->started_list); INIT_LIST_HEAD(&dep->cancelled_list); + INIT_DELAYED_WORK(&dep->nostream_work, dwc3_nostream_work); dwc3_debugfs_create_endpoint_dir(dep); @@ -3742,66 +3788,27 @@ static void dwc3_gadget_endpoint_command_complete(struct dwc3_ep *dep, static void dwc3_gadget_endpoint_stream_event(struct dwc3_ep *dep, const struct dwc3_event_depevt *event) { - struct dwc3 *dwc = dep->dwc; - if (event->status == DEPEVT_STREAMEVT_FOUND) { - dep->flags |= DWC3_EP_FIRST_STREAM_PRIMED; - goto out; + cancel_delayed_work(&dep->nostream_work); + dep->flags |= DWC3_EP_STREAM_PRIMED; + dep->flags &= ~DWC3_EP_IGNORE_NEXT_NOSTREAM; + return; } /* Note: NoStream rejection event param value is 0 and not 0xFFFF */ switch (event->parameters) { case DEPEVT_STREAM_PRIME: - /* - * If the host can properly transition the endpoint state from - * idle to prime after a NoStream rejection, there's no need to - * force restarting the endpoint to reinitiate the stream. To - * simplify the check, assume the host follows the USB spec if - * it primed the endpoint more than once. - */ - if (dep->flags & DWC3_EP_FORCE_RESTART_STREAM) { - if (dep->flags & DWC3_EP_FIRST_STREAM_PRIMED) - dep->flags &= ~DWC3_EP_FORCE_RESTART_STREAM; - else - dep->flags |= DWC3_EP_FIRST_STREAM_PRIMED; - } - + cancel_delayed_work(&dep->nostream_work); + dep->flags |= DWC3_EP_STREAM_PRIMED; + dep->flags &= ~DWC3_EP_IGNORE_NEXT_NOSTREAM; break; case DEPEVT_STREAM_NOSTREAM: - if ((dep->flags & DWC3_EP_IGNORE_NEXT_NOSTREAM) || - !(dep->flags & DWC3_EP_FORCE_RESTART_STREAM) || - (!DWC3_MST_CAPABLE(&dwc->hwparams) && - !(dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE))) - break; - - /* - * If the host rejects a stream due to no active stream, by the - * USB and xHCI spec, the endpoint will be put back to idle - * state. When the host is ready (buffer added/updated), it will - * prime the endpoint to inform the usb device controller. This - * triggers the device controller to issue ERDY to restart the - * stream. However, some hosts don't follow this and keep the - * endpoint in the idle state. No prime will come despite host - * streams are updated, and the device controller will not be - * triggered to generate ERDY to move the next stream data. To - * workaround this and maintain compatibility with various - * hosts, force to reinitiate the stream until the host is ready - * instead of waiting for the host to prime the endpoint. - */ - if (DWC3_VER_IS_WITHIN(DWC32, 100A, ANY)) { - unsigned int cmd = DWC3_DGCMD_SET_ENDPOINT_PRIME; - - dwc3_send_gadget_generic_command(dwc, cmd, dep->number); - } else { - dep->flags |= DWC3_EP_DELAY_START; - dwc3_stop_active_transfer(dep, true, true); - return; - } + dep->flags &= ~DWC3_EP_STREAM_PRIMED; + if (dep->flags & DWC3_EP_FORCE_RESTART_STREAM) + queue_delayed_work(system_wq, &dep->nostream_work, + msecs_to_jiffies(100)); break; } - -out: - dep->flags &= ~DWC3_EP_IGNORE_NEXT_NOSTREAM; } static void dwc3_endpoint_interrupt(struct dwc3 *dwc, diff --git a/drivers/usb/fotg210/fotg210-core.c b/drivers/usb/fotg210/fotg210-core.c index 49f25a7..7fb4d47 100644 --- a/drivers/usb/fotg210/fotg210-core.c +++ b/drivers/usb/fotg210/fotg210-core.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -119,8 +120,8 @@ void fotg210_vbus(struct fotg210 *fotg, bool enable) ret = regmap_update_bits(fotg->map, GEMINI_GLOBAL_MISC_CTRL, mask, val); if (ret) dev_err(fotg->dev, "failed to %s VBUS\n", - enable ? "enable" : "disable"); - dev_info(fotg->dev, "%s: %s VBUS\n", __func__, enable ? "enable" : "disable"); + str_enable_disable(enable)); + dev_info(fotg->dev, "%s: %s VBUS\n", __func__, str_enable_disable(enable)); } static int fotg210_probe(struct platform_device *pdev) diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c index 6cb7771..80841de 100644 --- a/drivers/usb/gadget/function/f_ecm.c +++ b/drivers/usb/gadget/function/f_ecm.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "u_ether.h" #include "u_ether_configfs.h" @@ -387,8 +388,7 @@ static void ecm_do_notify(struct f_ecm *ecm) event->wLength = 0; req->length = sizeof *event; - DBG(cdev, "notify connect %s\n", - ecm->is_open ? "true" : "false"); + DBG(cdev, "notify connect %s\n", str_true_false(ecm->is_open)); ecm->notify_state = ECM_NOTIFY_SPEED; break; diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 8e76124..f60576a 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -17,6 +17,7 @@ #include #include #include +#include #include @@ -558,7 +559,7 @@ static void ncm_do_notify(struct f_ncm *ncm) req->length = sizeof *event; DBG(cdev, "notify connect %s\n", - ncm->is_open ? "true" : "false"); + str_true_false(ncm->is_open)); ncm->notify_state = NCM_NOTIFY_NONE; break; diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index 15bb3aa..5a2e123 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -50,7 +51,7 @@ static int bot_enqueue_cmd_cbw(struct f_uas *fu) if (fu->flags & USBG_BOT_CMD_PEND) return 0; - ret = usb_ep_queue(fu->ep_out, fu->cmd.req, GFP_ATOMIC); + ret = usb_ep_queue(fu->ep_out, fu->cmd[0].req, GFP_ATOMIC); if (!ret) fu->flags |= USBG_BOT_CMD_PEND; return ret; @@ -62,10 +63,11 @@ static void bot_status_complete(struct usb_ep *ep, struct usb_request *req) struct f_uas *fu = cmd->fu; transport_generic_free_cmd(&cmd->se_cmd, 0); - if (req->status < 0) { - pr_err("ERR %s(%d)\n", __func__, __LINE__); + if (req->status == -ESHUTDOWN) return; - } + + if (req->status < 0) + pr_err("ERR %s(%d)\n", __func__, __LINE__); /* CSW completed, wait for next CBW */ bot_enqueue_cmd_cbw(fu); @@ -136,7 +138,7 @@ static void bot_send_bad_status(struct usbg_cmd *cmd) } req->complete = bot_err_compl; req->context = cmd; - req->buf = fu->cmd.buf; + req->buf = fu->cmd[0].buf; usb_ep_queue(ep, req, GFP_KERNEL); } else { bot_enqueue_sense_code(fu, cmd); @@ -196,6 +198,11 @@ static void bot_read_compl(struct usb_ep *ep, struct usb_request *req) if (req->status < 0) pr_err("ERR %s(%d)\n", __func__, __LINE__); + if (req->status == -ESHUTDOWN) { + transport_generic_free_cmd(&cmd->se_cmd, 0); + return; + } + bot_send_status(cmd, true); } @@ -244,11 +251,8 @@ static int usbg_prepare_w_request(struct usbg_cmd *, struct usb_request *); static int bot_send_write_request(struct usbg_cmd *cmd) { struct f_uas *fu = cmd->fu; - struct se_cmd *se_cmd = &cmd->se_cmd; - struct usb_gadget *gadget = fuas_to_gadget(fu); int ret; - init_completion(&cmd->write_complete); cmd->fu = fu; if (!cmd->data_len) { @@ -256,22 +260,6 @@ static int bot_send_write_request(struct usbg_cmd *cmd) return -EINVAL; } - if (!gadget->sg_supported) { - cmd->data_buf = kmalloc(se_cmd->data_length, GFP_KERNEL); - if (!cmd->data_buf) - return -ENOMEM; - - fu->bot_req_out->buf = cmd->data_buf; - } else { - fu->bot_req_out->buf = NULL; - fu->bot_req_out->num_sgs = se_cmd->t_data_nents; - fu->bot_req_out->sg = se_cmd->t_data_sg; - } - - fu->bot_req_out->complete = usbg_data_write_cmpl; - fu->bot_req_out->length = se_cmd->data_length; - fu->bot_req_out->context = cmd; - ret = usbg_prepare_w_request(cmd, fu->bot_req_out); if (ret) goto cleanup; @@ -279,8 +267,6 @@ static int bot_send_write_request(struct usbg_cmd *cmd) if (ret) pr_err("%s(%d)\n", __func__, __LINE__); - wait_for_completion(&cmd->write_complete); - target_execute_cmd(se_cmd); cleanup: return ret; } @@ -292,14 +278,31 @@ static void bot_cmd_complete(struct usb_ep *ep, struct usb_request *req) struct f_uas *fu = req->context; int ret; + if (req->status == -ESHUTDOWN) + return; + fu->flags &= ~USBG_BOT_CMD_PEND; - if (req->status < 0) + if (req->status < 0) { + struct usb_gadget *gadget = fuas_to_gadget(fu); + + dev_err(&gadget->dev, "BOT command req err (%d)\n", req->status); + bot_enqueue_cmd_cbw(fu); return; + } ret = bot_submit_command(fu, req->buf, req->actual); - if (ret) + if (ret) { pr_err("%s(%d): %d\n", __func__, __LINE__, ret); + if (!(fu->flags & USBG_BOT_WEDGED)) + usb_ep_set_wedge(fu->ep_in); + + fu->flags |= USBG_BOT_WEDGED; + bot_enqueue_cmd_cbw(fu); + } else if (fu->flags & USBG_BOT_WEDGED) { + fu->flags &= ~USBG_BOT_WEDGED; + usb_ep_clear_halt(fu->ep_in); + } } static int bot_prepare_reqs(struct f_uas *fu) @@ -314,8 +317,8 @@ static int bot_prepare_reqs(struct f_uas *fu) if (!fu->bot_req_out) goto err_out; - fu->cmd.req = usb_ep_alloc_request(fu->ep_out, GFP_KERNEL); - if (!fu->cmd.req) + fu->cmd[0].req = usb_ep_alloc_request(fu->ep_out, GFP_KERNEL); + if (!fu->cmd[0].req) goto err_cmd; fu->bot_status.req = usb_ep_alloc_request(fu->ep_in, GFP_KERNEL); @@ -327,27 +330,27 @@ static int bot_prepare_reqs(struct f_uas *fu) fu->bot_status.req->complete = bot_status_complete; fu->bot_status.csw.Signature = cpu_to_le32(US_BULK_CS_SIGN); - fu->cmd.buf = kmalloc(fu->ep_out->maxpacket, GFP_KERNEL); - if (!fu->cmd.buf) + fu->cmd[0].buf = kmalloc(fu->ep_out->maxpacket, GFP_KERNEL); + if (!fu->cmd[0].buf) goto err_buf; - fu->cmd.req->complete = bot_cmd_complete; - fu->cmd.req->buf = fu->cmd.buf; - fu->cmd.req->length = fu->ep_out->maxpacket; - fu->cmd.req->context = fu; + fu->cmd[0].req->complete = bot_cmd_complete; + fu->cmd[0].req->buf = fu->cmd[0].buf; + fu->cmd[0].req->length = fu->ep_out->maxpacket; + fu->cmd[0].req->context = fu; ret = bot_enqueue_cmd_cbw(fu); if (ret) goto err_queue; return 0; err_queue: - kfree(fu->cmd.buf); - fu->cmd.buf = NULL; + kfree(fu->cmd[0].buf); + fu->cmd[0].buf = NULL; err_buf: usb_ep_free_request(fu->ep_in, fu->bot_status.req); err_sts: - usb_ep_free_request(fu->ep_out, fu->cmd.req); - fu->cmd.req = NULL; + usb_ep_free_request(fu->ep_out, fu->cmd[0].req); + fu->cmd[0].req = NULL; err_cmd: usb_ep_free_request(fu->ep_out, fu->bot_req_out); fu->bot_req_out = NULL; @@ -372,16 +375,16 @@ static void bot_cleanup_old_alt(struct f_uas *fu) usb_ep_free_request(fu->ep_in, fu->bot_req_in); usb_ep_free_request(fu->ep_out, fu->bot_req_out); - usb_ep_free_request(fu->ep_out, fu->cmd.req); + usb_ep_free_request(fu->ep_out, fu->cmd[0].req); usb_ep_free_request(fu->ep_in, fu->bot_status.req); - kfree(fu->cmd.buf); + kfree(fu->cmd[0].buf); fu->bot_req_in = NULL; fu->bot_req_out = NULL; - fu->cmd.req = NULL; + fu->cmd[0].req = NULL; fu->bot_status.req = NULL; - fu->cmd.buf = NULL; + fu->cmd[0].buf = NULL; } static void bot_set_alt(struct f_uas *fu) @@ -441,14 +444,10 @@ static int usbg_bot_setup(struct usb_function *f, pr_err("No LUNs configured?\n"); return -EINVAL; } - /* - * If 4 LUNs are present we return 3 i.e. LUN 0..3 can be - * accessed. The upper limit is 0xf - */ luns--; - if (luns > 0xf) { + if (luns > US_BULK_MAX_LUN_LIMIT) { pr_info_once("Limiting the number of luns to 16\n"); - luns = 0xf; + luns = US_BULK_MAX_LUN_LIMIT; } ret_lun = cdev->req->buf; *ret_lun = luns; @@ -457,6 +456,11 @@ static int usbg_bot_setup(struct usb_function *f, case US_BULK_RESET_REQUEST: /* XXX maybe we should remove previous requests for IN + OUT */ + if (fu->flags & USBG_BOT_WEDGED) { + fu->flags &= ~USBG_BOT_WEDGED; + usb_ep_clear_halt(fu->ep_in); + } + bot_enqueue_cmd_cbw(fu); return 0; } @@ -465,6 +469,45 @@ static int usbg_bot_setup(struct usb_function *f, /* Start uas.c code */ +static int tcm_to_uasp_response(enum tcm_tmrsp_table code) +{ + switch (code) { + case TMR_FUNCTION_FAILED: + return RC_TMF_FAILED; + case TMR_FUNCTION_COMPLETE: + case TMR_TASK_DOES_NOT_EXIST: + return RC_TMF_COMPLETE; + case TMR_LUN_DOES_NOT_EXIST: + return RC_INCORRECT_LUN; + case TMR_FUNCTION_REJECTED: + case TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED: + default: + return RC_TMF_NOT_SUPPORTED; + } +} + +static unsigned char uasp_to_tcm_func(int code) +{ + switch (code) { + case TMF_ABORT_TASK: + return TMR_ABORT_TASK; + case TMF_ABORT_TASK_SET: + return TMR_ABORT_TASK_SET; + case TMF_CLEAR_TASK_SET: + return TMR_CLEAR_TASK_SET; + case TMF_LOGICAL_UNIT_RESET: + return TMR_LUN_RESET; + case TMF_CLEAR_ACA: + return TMR_CLEAR_ACA; + case TMF_I_T_NEXUS_RESET: + case TMF_QUERY_TASK: + case TMF_QUERY_TASK_SET: + case TMF_QUERY_ASYNC_EVENT: + default: + return TMR_UNKNOWN; + } +} + static void uasp_cleanup_one_stream(struct f_uas *fu, struct uas_stream *stream) { /* We have either all three allocated or none */ @@ -482,10 +525,14 @@ static void uasp_cleanup_one_stream(struct f_uas *fu, struct uas_stream *stream) static void uasp_free_cmdreq(struct f_uas *fu) { - usb_ep_free_request(fu->ep_cmd, fu->cmd.req); - kfree(fu->cmd.buf); - fu->cmd.req = NULL; - fu->cmd.buf = NULL; + int i; + + for (i = 0; i < USBG_NUM_CMDS; i++) { + usb_ep_free_request(fu->ep_cmd, fu->cmd[i].req); + kfree(fu->cmd[i].buf); + fu->cmd[i].req = NULL; + fu->cmd[i].buf = NULL; + } } static void uasp_cleanup_old_alt(struct f_uas *fu) @@ -500,7 +547,7 @@ static void uasp_cleanup_old_alt(struct f_uas *fu) usb_ep_disable(fu->ep_status); usb_ep_disable(fu->ep_cmd); - for (i = 0; i < UASP_SS_EP_COMP_NUM_STREAMS; i++) + for (i = 0; i < USBG_NUM_CMDS; i++) uasp_cleanup_one_stream(fu, &fu->stream[i]); uasp_free_cmdreq(fu); } @@ -512,7 +559,7 @@ static int uasp_prepare_r_request(struct usbg_cmd *cmd) struct se_cmd *se_cmd = &cmd->se_cmd; struct f_uas *fu = cmd->fu; struct usb_gadget *gadget = fuas_to_gadget(fu); - struct uas_stream *stream = cmd->stream; + struct uas_stream *stream = &fu->stream[se_cmd->map_tag]; if (!gadget->sg_supported) { cmd->data_buf = kmalloc(se_cmd->data_length, GFP_ATOMIC); @@ -532,6 +579,7 @@ static int uasp_prepare_r_request(struct usbg_cmd *cmd) } stream->req_in->is_last = 1; + stream->req_in->stream_id = cmd->tag; stream->req_in->complete = uasp_status_data_cmpl; stream->req_in->length = se_cmd->data_length; stream->req_in->context = cmd; @@ -544,7 +592,7 @@ static void uasp_prepare_status(struct usbg_cmd *cmd) { struct se_cmd *se_cmd = &cmd->se_cmd; struct sense_iu *iu = &cmd->sense_iu; - struct uas_stream *stream = cmd->stream; + struct uas_stream *stream = &cmd->fu->stream[se_cmd->map_tag]; cmd->state = UASP_QUEUE_COMMAND; iu->iu_id = IU_ID_STATUS; @@ -556,20 +604,76 @@ static void uasp_prepare_status(struct usbg_cmd *cmd) iu->len = cpu_to_be16(se_cmd->scsi_sense_length); iu->status = se_cmd->scsi_status; stream->req_status->is_last = 1; + stream->req_status->stream_id = cmd->tag; stream->req_status->context = cmd; stream->req_status->length = se_cmd->scsi_sense_length + 16; stream->req_status->buf = iu; stream->req_status->complete = uasp_status_data_cmpl; } +static void uasp_prepare_response(struct usbg_cmd *cmd) +{ + struct se_cmd *se_cmd = &cmd->se_cmd; + struct response_iu *rsp_iu = &cmd->response_iu; + struct uas_stream *stream = &cmd->fu->stream[se_cmd->map_tag]; + + cmd->state = UASP_QUEUE_COMMAND; + rsp_iu->iu_id = IU_ID_RESPONSE; + rsp_iu->tag = cpu_to_be16(cmd->tag); + + if (cmd->tmr_rsp != RC_RESPONSE_UNKNOWN) + rsp_iu->response_code = cmd->tmr_rsp; + else + rsp_iu->response_code = + tcm_to_uasp_response(se_cmd->se_tmr_req->response); + + /* + * The UASP driver must support all the task management functions listed + * in Table 20 of UAS-r04. To remain compliant while indicate that the + * TMR did not go through, report RC_TMF_FAILED instead of + * RC_TMF_NOT_SUPPORTED and print a warning to the user. + */ + switch (cmd->tmr_func) { + case TMF_ABORT_TASK: + case TMF_ABORT_TASK_SET: + case TMF_CLEAR_TASK_SET: + case TMF_LOGICAL_UNIT_RESET: + case TMF_CLEAR_ACA: + case TMF_I_T_NEXUS_RESET: + case TMF_QUERY_TASK: + case TMF_QUERY_TASK_SET: + case TMF_QUERY_ASYNC_EVENT: + if (rsp_iu->response_code == RC_TMF_NOT_SUPPORTED) { + struct usb_gadget *gadget = fuas_to_gadget(cmd->fu); + + dev_warn(&gadget->dev, "TMF function %d not supported\n", + cmd->tmr_func); + rsp_iu->response_code = RC_TMF_FAILED; + } + break; + default: + break; + } + + stream->req_status->is_last = 1; + stream->req_status->stream_id = cmd->tag; + stream->req_status->context = cmd; + stream->req_status->length = sizeof(struct response_iu); + stream->req_status->buf = rsp_iu; + stream->req_status->complete = uasp_status_data_cmpl; +} + +static void usbg_release_cmd(struct se_cmd *se_cmd); +static int uasp_send_tm_response(struct usbg_cmd *cmd); + static void uasp_status_data_cmpl(struct usb_ep *ep, struct usb_request *req) { struct usbg_cmd *cmd = req->context; - struct uas_stream *stream = cmd->stream; struct f_uas *fu = cmd->fu; + struct uas_stream *stream = &fu->stream[cmd->se_cmd.map_tag]; int ret; - if (req->status < 0) + if (req->status == -ESHUTDOWN) goto cleanup; switch (cmd->state) { @@ -600,8 +704,37 @@ static void uasp_status_data_cmpl(struct usb_ep *ep, struct usb_request *req) break; case UASP_QUEUE_COMMAND: - transport_generic_free_cmd(&cmd->se_cmd, 0); - usb_ep_queue(fu->ep_cmd, fu->cmd.req, GFP_ATOMIC); + /* + * Overlapped command detected and cancelled. + * So send overlapped attempted status. + */ + if (cmd->tmr_rsp == RC_OVERLAPPED_TAG && + req->status == -ECONNRESET) { + uasp_send_tm_response(cmd); + return; + } + + hash_del(&stream->node); + + /* + * If no command submitted to target core here, just free the + * bitmap index. This is for the cases where f_tcm handles + * status response instead of the target core. + */ + if (cmd->tmr_rsp != RC_OVERLAPPED_TAG && + cmd->tmr_rsp != RC_RESPONSE_UNKNOWN) { + struct se_session *se_sess; + + se_sess = fu->tpg->tpg_nexus->tvn_se_sess; + sbitmap_queue_clear(&se_sess->sess_tag_pool, + cmd->se_cmd.map_tag, + cmd->se_cmd.map_cpu); + } else { + transport_generic_free_cmd(&cmd->se_cmd, 0); + } + + usb_ep_queue(fu->ep_cmd, cmd->req, GFP_ATOMIC); + complete(&stream->cmd_completion); break; default: @@ -610,27 +743,38 @@ static void uasp_status_data_cmpl(struct usb_ep *ep, struct usb_request *req) return; cleanup: + hash_del(&stream->node); transport_generic_free_cmd(&cmd->se_cmd, 0); } static int uasp_send_status_response(struct usbg_cmd *cmd) { struct f_uas *fu = cmd->fu; - struct uas_stream *stream = cmd->stream; + struct uas_stream *stream = &fu->stream[cmd->se_cmd.map_tag]; struct sense_iu *iu = &cmd->sense_iu; iu->tag = cpu_to_be16(cmd->tag); - stream->req_status->complete = uasp_status_data_cmpl; - stream->req_status->context = cmd; cmd->fu = fu; uasp_prepare_status(cmd); return usb_ep_queue(fu->ep_status, stream->req_status, GFP_ATOMIC); } +static int uasp_send_tm_response(struct usbg_cmd *cmd) +{ + struct f_uas *fu = cmd->fu; + struct uas_stream *stream = &fu->stream[cmd->se_cmd.map_tag]; + struct response_iu *iu = &cmd->response_iu; + + iu->tag = cpu_to_be16(cmd->tag); + cmd->fu = fu; + uasp_prepare_response(cmd); + return usb_ep_queue(fu->ep_status, stream->req_status, GFP_ATOMIC); +} + static int uasp_send_read_response(struct usbg_cmd *cmd) { struct f_uas *fu = cmd->fu; - struct uas_stream *stream = cmd->stream; + struct uas_stream *stream = &fu->stream[cmd->se_cmd.map_tag]; struct sense_iu *iu = &cmd->sense_iu; int ret; @@ -674,11 +818,10 @@ static int uasp_send_write_request(struct usbg_cmd *cmd) { struct f_uas *fu = cmd->fu; struct se_cmd *se_cmd = &cmd->se_cmd; - struct uas_stream *stream = cmd->stream; + struct uas_stream *stream = &fu->stream[se_cmd->map_tag]; struct sense_iu *iu = &cmd->sense_iu; int ret; - init_completion(&cmd->write_complete); cmd->fu = fu; iu->tag = cpu_to_be16(cmd->tag); @@ -710,36 +853,31 @@ static int uasp_send_write_request(struct usbg_cmd *cmd) pr_err("%s(%d)\n", __func__, __LINE__); } - wait_for_completion(&cmd->write_complete); - target_execute_cmd(se_cmd); cleanup: return ret; } -static int usbg_submit_command(struct f_uas *, void *, unsigned int); +static int usbg_submit_command(struct f_uas *, struct usb_request *); static void uasp_cmd_complete(struct usb_ep *ep, struct usb_request *req) { struct f_uas *fu = req->context; - int ret; - if (req->status < 0) + if (req->status == -ESHUTDOWN) return; - ret = usbg_submit_command(fu, req->buf, req->actual); - /* - * Once we tune for performance enqueue the command req here again so - * we can receive a second command while we processing this one. Pay - * attention to properly sync STAUS endpoint with DATA IN + OUT so you - * don't break HS. - */ - if (!ret) + if (req->status < 0) { + usb_ep_queue(fu->ep_cmd, req, GFP_ATOMIC); return; - usb_ep_queue(fu->ep_cmd, fu->cmd.req, GFP_ATOMIC); + } + + usbg_submit_command(fu, req); } static int uasp_alloc_stream_res(struct f_uas *fu, struct uas_stream *stream) { + init_completion(&stream->cmd_completion); + stream->req_in = usb_ep_alloc_request(fu->ep_in, GFP_KERNEL); if (!stream->req_in) goto out; @@ -764,66 +902,48 @@ out: return -ENOMEM; } -static int uasp_alloc_cmd(struct f_uas *fu) +static int uasp_alloc_cmd(struct f_uas *fu, int i) { - fu->cmd.req = usb_ep_alloc_request(fu->ep_cmd, GFP_KERNEL); - if (!fu->cmd.req) + fu->cmd[i].req = usb_ep_alloc_request(fu->ep_cmd, GFP_KERNEL); + if (!fu->cmd[i].req) goto err; - fu->cmd.buf = kmalloc(fu->ep_cmd->maxpacket, GFP_KERNEL); - if (!fu->cmd.buf) + fu->cmd[i].buf = kmalloc(fu->ep_cmd->maxpacket, GFP_KERNEL); + if (!fu->cmd[i].buf) goto err_buf; - fu->cmd.req->complete = uasp_cmd_complete; - fu->cmd.req->buf = fu->cmd.buf; - fu->cmd.req->length = fu->ep_cmd->maxpacket; - fu->cmd.req->context = fu; + fu->cmd[i].req->complete = uasp_cmd_complete; + fu->cmd[i].req->buf = fu->cmd[i].buf; + fu->cmd[i].req->length = fu->ep_cmd->maxpacket; + fu->cmd[i].req->context = fu; return 0; err_buf: - usb_ep_free_request(fu->ep_cmd, fu->cmd.req); + usb_ep_free_request(fu->ep_cmd, fu->cmd[i].req); err: return -ENOMEM; } -static void uasp_setup_stream_res(struct f_uas *fu, int max_streams) -{ - int i; - - for (i = 0; i < max_streams; i++) { - struct uas_stream *s = &fu->stream[i]; - - s->req_in->stream_id = i + 1; - s->req_out->stream_id = i + 1; - s->req_status->stream_id = i + 1; - } -} - static int uasp_prepare_reqs(struct f_uas *fu) { int ret; int i; - int max_streams; - if (fu->flags & USBG_USE_STREAMS) - max_streams = UASP_SS_EP_COMP_NUM_STREAMS; - else - max_streams = 1; - - for (i = 0; i < max_streams; i++) { + for (i = 0; i < USBG_NUM_CMDS; i++) { ret = uasp_alloc_stream_res(fu, &fu->stream[i]); if (ret) goto err_cleanup; } - ret = uasp_alloc_cmd(fu); - if (ret) - goto err_free_stream; - uasp_setup_stream_res(fu, max_streams); + for (i = 0; i < USBG_NUM_CMDS; i++) { + ret = uasp_alloc_cmd(fu, i); + if (ret) + goto err_free_stream; - ret = usb_ep_queue(fu->ep_cmd, fu->cmd.req, GFP_ATOMIC); - if (ret) - goto err_free_stream; + ret = usb_ep_queue(fu->ep_cmd, fu->cmd[i].req, GFP_ATOMIC); + if (ret) + goto err_free_stream; + } return 0; @@ -914,6 +1034,8 @@ static int get_cmd_dir(const unsigned char *cdb) case READ_TOC: case READ_FORMAT_CAPACITIES: case REQUEST_SENSE: + case ATA_12: + case ATA_16: ret = DMA_FROM_DEVICE; break; @@ -957,7 +1079,18 @@ static void usbg_data_write_cmpl(struct usb_ep *ep, struct usb_request *req) struct usbg_cmd *cmd = req->context; struct se_cmd *se_cmd = &cmd->se_cmd; - if (req->status < 0) { + cmd->state = UASP_QUEUE_COMMAND; + + if (req->status == -ESHUTDOWN) { + struct uas_stream *stream = &cmd->fu->stream[se_cmd->map_tag]; + + hash_del(&stream->node); + target_put_sess_cmd(se_cmd); + transport_generic_free_cmd(&cmd->se_cmd, 0); + return; + } + + if (req->status) { pr_err("%s() state %d transfer failed\n", __func__, cmd->state); goto cleanup; } @@ -969,11 +1102,22 @@ static void usbg_data_write_cmpl(struct usb_ep *ep, struct usb_request *req) se_cmd->data_length); } - complete(&cmd->write_complete); + cmd->flags |= USBG_CMD_PENDING_DATA_WRITE; + queue_work(cmd->fu->tpg->workqueue, &cmd->work); return; cleanup: - transport_generic_free_cmd(&cmd->se_cmd, 0); + target_put_sess_cmd(se_cmd); + + /* Command was aborted due to overlapped tag */ + if (cmd->state == UASP_QUEUE_COMMAND && + cmd->tmr_rsp == RC_OVERLAPPED_TAG) { + uasp_send_tm_response(cmd); + return; + } + + transport_send_check_condition_and_sense(se_cmd, + TCM_CHECK_CONDITION_ABORT_CMD, 0); } static int usbg_prepare_w_request(struct usbg_cmd *cmd, struct usb_request *req) @@ -995,9 +1139,12 @@ static int usbg_prepare_w_request(struct usbg_cmd *cmd, struct usb_request *req) } req->is_last = 1; + req->stream_id = cmd->tag; req->complete = usbg_data_write_cmpl; req->length = se_cmd->data_length; req->context = cmd; + + cmd->state = UASP_SEND_STATUS; return 0; } @@ -1037,36 +1184,153 @@ static int usbg_send_read_response(struct se_cmd *se_cmd) return uasp_send_read_response(cmd); } -static void usbg_cmd_work(struct work_struct *work) +static void usbg_aborted_task(struct se_cmd *se_cmd); + +static void usbg_submit_tmr(struct usbg_cmd *cmd) +{ + struct se_session *se_sess; + struct se_cmd *se_cmd; + int flags = TARGET_SCF_ACK_KREF; + + se_cmd = &cmd->se_cmd; + se_sess = cmd->fu->tpg->tpg_nexus->tvn_se_sess; + + target_submit_tmr(se_cmd, se_sess, + cmd->response_iu.add_response_info, + cmd->unpacked_lun, NULL, uasp_to_tcm_func(cmd->tmr_func), + GFP_ATOMIC, cmd->tag, flags); +} + +static void usbg_submit_cmd(struct usbg_cmd *cmd) { - struct usbg_cmd *cmd = container_of(work, struct usbg_cmd, work); struct se_cmd *se_cmd; struct tcm_usbg_nexus *tv_nexus; struct usbg_tpg *tpg; int dir, flags = (TARGET_SCF_UNKNOWN_SIZE | TARGET_SCF_ACK_KREF); + /* + * Note: each command will spawn its own process, and each stage of the + * command is processed sequentially. Should this no longer be the case, + * locking is needed. + */ + if (cmd->flags & USBG_CMD_PENDING_DATA_WRITE) { + target_execute_cmd(&cmd->se_cmd); + cmd->flags &= ~USBG_CMD_PENDING_DATA_WRITE; + return; + } + se_cmd = &cmd->se_cmd; tpg = cmd->fu->tpg; tv_nexus = tpg->tpg_nexus; dir = get_cmd_dir(cmd->cmd_buf); - if (dir < 0) { - __target_init_cmd(se_cmd, - tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo, - tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE, - cmd->prio_attr, cmd->sense_iu.sense, - cmd->unpacked_lun, NULL); + if (dir < 0) goto out; - } target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess, cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun, 0, cmd->prio_attr, dir, flags); + return; out: + __target_init_cmd(se_cmd, + tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo, + tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE, + cmd->prio_attr, cmd->sense_iu.sense, + cmd->unpacked_lun, NULL); transport_send_check_condition_and_sense(se_cmd, - TCM_UNSUPPORTED_SCSI_OPCODE, 1); - transport_generic_free_cmd(&cmd->se_cmd, 0); + TCM_UNSUPPORTED_SCSI_OPCODE, 0); +} + +static void usbg_cmd_work(struct work_struct *work) +{ + struct usbg_cmd *cmd = container_of(work, struct usbg_cmd, work); + + /* + * Failure is detected by f_tcm here. Skip submitting the command to the + * target core if we already know the failing response and send the usb + * response to the host directly. + */ + if (cmd->tmr_rsp != RC_RESPONSE_UNKNOWN) + goto skip; + + if (cmd->tmr_func) + usbg_submit_tmr(cmd); + else + usbg_submit_cmd(cmd); + + return; + +skip: + if (cmd->tmr_rsp == RC_OVERLAPPED_TAG) { + struct f_uas *fu = cmd->fu; + struct se_session *se_sess; + struct uas_stream *stream = NULL; + struct hlist_node *tmp; + struct usbg_cmd *active_cmd = NULL; + + se_sess = cmd->fu->tpg->tpg_nexus->tvn_se_sess; + + hash_for_each_possible_safe(fu->stream_hash, stream, tmp, node, cmd->tag) { + int i = stream - &fu->stream[0]; + + active_cmd = &((struct usbg_cmd *)se_sess->sess_cmd_map)[i]; + if (active_cmd->tag == cmd->tag) + break; + } + + /* Sanity check */ + if (!stream || (active_cmd && active_cmd->tag != cmd->tag)) { + usbg_submit_command(cmd->fu, cmd->req); + return; + } + + reinit_completion(&stream->cmd_completion); + + /* + * A UASP command consists of the command, data, and status + * stages, each operating sequentially from different endpoints. + * + * Each USB endpoint operates independently, and depending on + * hardware implementation, a completion callback for a transfer + * from one endpoint may not reflect the order of completion on + * the wire. This is particularly true for devices with + * endpoints that have independent interrupts and event buffers. + * + * The driver must still detect misbehaving hosts and respond + * with an overlap status. To reduce false overlap failures, + * allow the active and matching stream ID a brief 1ms to + * complete before responding with an overlap command failure. + * Overlap failure should be rare. + */ + wait_for_completion_timeout(&stream->cmd_completion, msecs_to_jiffies(1)); + + /* If the previous stream is completed, retry the command. */ + if (!hash_hashed(&stream->node)) { + usbg_submit_command(cmd->fu, cmd->req); + return; + } + + /* + * The command isn't submitted to the target core, so we're safe + * to remove the bitmap index from the session tag pool. + */ + sbitmap_queue_clear(&se_sess->sess_tag_pool, + cmd->se_cmd.map_tag, + cmd->se_cmd.map_cpu); + + /* + * Overlap command tag detected. Cancel any pending transfer of + * the command submitted to target core. + */ + active_cmd->tmr_rsp = RC_OVERLAPPED_TAG; + usbg_aborted_task(&active_cmd->se_cmd); + + /* Send the response after the transfer is aborted. */ + return; + } + + uasp_send_tm_response(cmd); } static struct usbg_cmd *usbg_get_cmd(struct f_uas *fu, @@ -1084,6 +1348,7 @@ static struct usbg_cmd *usbg_get_cmd(struct f_uas *fu, memset(cmd, 0, sizeof(*cmd)); cmd->se_cmd.map_tag = tag; cmd->se_cmd.map_cpu = cpu; + cmd->se_cmd.cpuid = cpu; cmd->se_cmd.tag = cmd->tag = scsi_tag; cmd->fu = fu; @@ -1092,50 +1357,82 @@ static struct usbg_cmd *usbg_get_cmd(struct f_uas *fu, static void usbg_release_cmd(struct se_cmd *); -static int usbg_submit_command(struct f_uas *fu, - void *cmdbuf, unsigned int len) +static int usbg_submit_command(struct f_uas *fu, struct usb_request *req) { - struct command_iu *cmd_iu = cmdbuf; + struct iu *iu = req->buf; struct usbg_cmd *cmd; struct usbg_tpg *tpg = fu->tpg; struct tcm_usbg_nexus *tv_nexus; + struct uas_stream *stream; + struct hlist_node *tmp; + struct command_iu *cmd_iu; u32 cmd_len; u16 scsi_tag; - if (cmd_iu->iu_id != IU_ID_COMMAND) { - pr_err("Unsupported type %d\n", cmd_iu->iu_id); - return -EINVAL; - } - tv_nexus = tpg->tpg_nexus; if (!tv_nexus) { pr_err("Missing nexus, ignoring command\n"); return -EINVAL; } - cmd_len = (cmd_iu->len & ~0x3) + 16; - if (cmd_len > USBG_MAX_CMD) - return -EINVAL; - - scsi_tag = be16_to_cpup(&cmd_iu->tag); + scsi_tag = be16_to_cpup(&iu->tag); cmd = usbg_get_cmd(fu, tv_nexus, scsi_tag); if (IS_ERR(cmd)) { pr_err("usbg_get_cmd failed\n"); return -ENOMEM; } - memcpy(cmd->cmd_buf, cmd_iu->cdb, cmd_len); - if (fu->flags & USBG_USE_STREAMS) { - if (cmd->tag > UASP_SS_EP_COMP_NUM_STREAMS) - goto err; - if (!cmd->tag) - cmd->stream = &fu->stream[0]; - else - cmd->stream = &fu->stream[cmd->tag - 1]; - } else { - cmd->stream = &fu->stream[0]; + cmd->req = req; + cmd->fu = fu; + cmd->tag = scsi_tag; + cmd->se_cmd.tag = scsi_tag; + cmd->tmr_func = 0; + cmd->tmr_rsp = RC_RESPONSE_UNKNOWN; + cmd->flags = 0; + + cmd_iu = (struct command_iu *)iu; + + /* Command and Task Management IUs share the same LUN offset */ + cmd->unpacked_lun = scsilun_to_int(&cmd_iu->lun); + + if (iu->iu_id != IU_ID_COMMAND && iu->iu_id != IU_ID_TASK_MGMT) { + cmd->tmr_rsp = RC_INVALID_INFO_UNIT; + goto skip; + } + + hash_for_each_possible_safe(fu->stream_hash, stream, tmp, node, scsi_tag) { + struct usbg_cmd *active_cmd; + struct se_session *se_sess; + int i = stream - &fu->stream[0]; + + se_sess = cmd->fu->tpg->tpg_nexus->tvn_se_sess; + active_cmd = &((struct usbg_cmd *)se_sess->sess_cmd_map)[i]; + + if (active_cmd->tag == scsi_tag) { + cmd->tmr_rsp = RC_OVERLAPPED_TAG; + goto skip; + } } + stream = &fu->stream[cmd->se_cmd.map_tag]; + hash_add(fu->stream_hash, &stream->node, scsi_tag); + + if (iu->iu_id == IU_ID_TASK_MGMT) { + struct task_mgmt_iu *tm_iu; + + tm_iu = (struct task_mgmt_iu *)iu; + cmd->tmr_func = tm_iu->function; + goto skip; + } + + cmd_len = (cmd_iu->len & ~0x3) + 16; + if (cmd_len > USBG_MAX_CMD) { + target_free_tag(tv_nexus->tvn_se_sess, &cmd->se_cmd); + hash_del(&stream->node); + return -EINVAL; + } + memcpy(cmd->cmd_buf, cmd_iu->cdb, cmd_len); + switch (cmd_iu->prio_attr & 0x7) { case UAS_HEAD_TAG: cmd->prio_attr = TCM_HEAD_TAG; @@ -1155,15 +1452,11 @@ static int usbg_submit_command(struct f_uas *fu, break; } - cmd->unpacked_lun = scsilun_to_int(&cmd_iu->lun); - +skip: INIT_WORK(&cmd->work, usbg_cmd_work); queue_work(tpg->workqueue, &cmd->work); return 0; -err: - usbg_release_cmd(&cmd->se_cmd); - return -EINVAL; } static void bot_cmd_work(struct work_struct *work) @@ -1172,30 +1465,40 @@ static void bot_cmd_work(struct work_struct *work) struct se_cmd *se_cmd; struct tcm_usbg_nexus *tv_nexus; struct usbg_tpg *tpg; + int flags = TARGET_SCF_ACK_KREF; int dir; + /* + * Note: each command will spawn its own process, and each stage of the + * command is processed sequentially. Should this no longer be the case, + * locking is needed. + */ + if (cmd->flags & USBG_CMD_PENDING_DATA_WRITE) { + target_execute_cmd(&cmd->se_cmd); + cmd->flags &= ~USBG_CMD_PENDING_DATA_WRITE; + return; + } + se_cmd = &cmd->se_cmd; tpg = cmd->fu->tpg; tv_nexus = tpg->tpg_nexus; dir = get_cmd_dir(cmd->cmd_buf); - if (dir < 0) { - __target_init_cmd(se_cmd, - tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo, - tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE, - cmd->prio_attr, cmd->sense_iu.sense, - cmd->unpacked_lun, NULL); + if (dir < 0) goto out; - } target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess, cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun, - cmd->data_len, cmd->prio_attr, dir, 0); + cmd->data_len, cmd->prio_attr, dir, flags); return; out: + __target_init_cmd(se_cmd, + tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo, + tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE, + cmd->prio_attr, cmd->sense_iu.sense, + cmd->unpacked_lun, NULL); transport_send_check_condition_and_sense(se_cmd, - TCM_UNSUPPORTED_SCSI_OPCODE, 1); - transport_generic_free_cmd(&cmd->se_cmd, 0); + TCM_UNSUPPORTED_SCSI_OPCODE, 0); } static int bot_submit_command(struct f_uas *fu, @@ -1239,6 +1542,7 @@ static int bot_submit_command(struct f_uas *fu, cmd->is_read = cbw->Flags & US_BULK_FLAG_IN ? 1 : 0; cmd->data_len = le32_to_cpu(cbw->DataTransferLength); cmd->se_cmd.tag = le32_to_cpu(cmd->bot_tag); + cmd->flags = 0; INIT_WORK(&cmd->work, bot_cmd_work); queue_work(tpg->workqueue, &cmd->work); @@ -1275,16 +1579,38 @@ static void usbg_release_cmd(struct se_cmd *se_cmd) se_cmd); struct se_session *se_sess = se_cmd->se_sess; + cmd->tag = 0; kfree(cmd->data_buf); target_free_tag(se_sess, se_cmd); } static void usbg_queue_tm_rsp(struct se_cmd *se_cmd) { + struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd, se_cmd); + + uasp_send_tm_response(cmd); } static void usbg_aborted_task(struct se_cmd *se_cmd) { + struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd, se_cmd); + struct f_uas *fu = cmd->fu; + struct usb_gadget *gadget = fuas_to_gadget(fu); + struct uas_stream *stream = &fu->stream[se_cmd->map_tag]; + int ret = 0; + + if (stream->req_out->status == -EINPROGRESS) + ret = usb_ep_dequeue(fu->ep_out, stream->req_out); + else if (stream->req_in->status == -EINPROGRESS) + ret = usb_ep_dequeue(fu->ep_in, stream->req_in); + else if (stream->req_status->status == -EINPROGRESS) + ret = usb_ep_dequeue(fu->ep_status, stream->req_status); + + if (ret) + dev_err(&gadget->dev, "Failed to abort cmd tag %d, (%d)\n", + cmd->tag, ret); + + cmd->state = UASP_QUEUE_COMMAND; } static const char *usbg_check_wwn(const char *name) @@ -1355,7 +1681,8 @@ static struct se_portal_group *usbg_make_tpg(struct se_wwn *wwn, goto unref_dep; mutex_init(&tpg->tpg_mutex); atomic_set(&tpg->tpg_port_count, 0); - tpg->workqueue = alloc_workqueue("tcm_usb_gadget", 0, 1); + tpg->workqueue = alloc_workqueue("tcm_usb_gadget", + WQ_UNBOUND, WQ_UNBOUND_MAX_ACTIVE); if (!tpg->workqueue) goto free_tpg; @@ -1746,7 +2073,7 @@ static struct usb_endpoint_descriptor uasp_ss_bi_desc = { static struct usb_ss_ep_comp_descriptor uasp_bi_ep_comp_desc = { .bLength = sizeof(uasp_bi_ep_comp_desc), .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, - .bMaxBurst = 0, + .bMaxBurst = 15, .bmAttributes = UASP_SS_EP_COMP_LOG_STREAMS, .wBytesPerInterval = 0, }; @@ -1754,7 +2081,7 @@ static struct usb_ss_ep_comp_descriptor uasp_bi_ep_comp_desc = { static struct usb_ss_ep_comp_descriptor bot_bi_ep_comp_desc = { .bLength = sizeof(bot_bi_ep_comp_desc), .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, - .bMaxBurst = 0, + .bMaxBurst = 15, }; static struct usb_endpoint_descriptor uasp_bo_desc = { @@ -1789,12 +2116,14 @@ static struct usb_endpoint_descriptor uasp_ss_bo_desc = { static struct usb_ss_ep_comp_descriptor uasp_bo_ep_comp_desc = { .bLength = sizeof(uasp_bo_ep_comp_desc), .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 15, .bmAttributes = UASP_SS_EP_COMP_LOG_STREAMS, }; static struct usb_ss_ep_comp_descriptor bot_bo_ep_comp_desc = { .bLength = sizeof(bot_bo_ep_comp_desc), .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 15, }; static struct usb_endpoint_descriptor uasp_status_desc = { @@ -1971,43 +2300,39 @@ static int tcm_bind(struct usb_configuration *c, struct usb_function *f) bot_intf_desc.bInterfaceNumber = iface; uasp_intf_desc.bInterfaceNumber = iface; fu->iface = iface; - ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_bi_desc, - &uasp_bi_ep_comp_desc); + ep = usb_ep_autoconfig(gadget, &uasp_fs_bi_desc); if (!ep) goto ep_fail; fu->ep_in = ep; - ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_bo_desc, - &uasp_bo_ep_comp_desc); + ep = usb_ep_autoconfig(gadget, &uasp_fs_bo_desc); if (!ep) goto ep_fail; fu->ep_out = ep; - ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_status_desc, - &uasp_status_in_ep_comp_desc); + ep = usb_ep_autoconfig(gadget, &uasp_fs_status_desc); if (!ep) goto ep_fail; fu->ep_status = ep; - ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_cmd_desc, - &uasp_cmd_comp_desc); + ep = usb_ep_autoconfig(gadget, &uasp_fs_cmd_desc); if (!ep) goto ep_fail; fu->ep_cmd = ep; /* Assume endpoint addresses are the same for both speeds */ - uasp_bi_desc.bEndpointAddress = uasp_ss_bi_desc.bEndpointAddress; - uasp_bo_desc.bEndpointAddress = uasp_ss_bo_desc.bEndpointAddress; + uasp_bi_desc.bEndpointAddress = uasp_fs_bi_desc.bEndpointAddress; + uasp_bo_desc.bEndpointAddress = uasp_fs_bo_desc.bEndpointAddress; uasp_status_desc.bEndpointAddress = - uasp_ss_status_desc.bEndpointAddress; - uasp_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress; + uasp_fs_status_desc.bEndpointAddress; + uasp_cmd_desc.bEndpointAddress = uasp_fs_cmd_desc.bEndpointAddress; - uasp_fs_bi_desc.bEndpointAddress = uasp_ss_bi_desc.bEndpointAddress; - uasp_fs_bo_desc.bEndpointAddress = uasp_ss_bo_desc.bEndpointAddress; - uasp_fs_status_desc.bEndpointAddress = - uasp_ss_status_desc.bEndpointAddress; - uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress; + uasp_ss_bi_desc.bEndpointAddress = uasp_fs_bi_desc.bEndpointAddress; + uasp_ss_bo_desc.bEndpointAddress = uasp_fs_bo_desc.bEndpointAddress; + uasp_ss_status_desc.bEndpointAddress = + uasp_fs_status_desc.bEndpointAddress; + uasp_ss_cmd_desc.bEndpointAddress = uasp_fs_cmd_desc.bEndpointAddress; ret = usb_assign_descriptors(f, uasp_fs_function_desc, uasp_hs_function_desc, uasp_ss_function_desc, @@ -2051,9 +2376,14 @@ static void tcm_delayed_set_alt(struct work_struct *wq) static int tcm_get_alt(struct usb_function *f, unsigned intf) { - if (intf == bot_intf_desc.bInterfaceNumber) + struct f_uas *fu = to_f_uas(f); + + if (fu->iface != intf) + return -EOPNOTSUPP; + + if (fu->flags & USBG_IS_BOT) return USB_G_ALT_INT_BBB; - if (intf == uasp_intf_desc.bInterfaceNumber) + else if (fu->flags & USBG_IS_UAS) return USB_G_ALT_INT_UAS; return -EOPNOTSUPP; @@ -2063,6 +2393,9 @@ static int tcm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { struct f_uas *fu = to_f_uas(f); + if (fu->iface != intf) + return -EOPNOTSUPP; + if ((alt == USB_G_ALT_INT_BBB) || (alt == USB_G_ALT_INT_UAS)) { struct guas_setup_wq *work; @@ -2271,6 +2604,8 @@ static struct usb_function *tcm_alloc(struct usb_function_instance *fi) fu->function.disable = tcm_disable; fu->function.free_func = tcm_free; fu->tpg = tpg_instances[i].tpg; + + hash_init(fu->stream_hash); mutex_unlock(&tpg_instances_lock); return &fu->function; diff --git a/drivers/usb/gadget/function/storage_common.h b/drivers/usb/gadget/function/storage_common.h index ced5d2b..11ac785 100644 --- a/drivers/usb/gadget/function/storage_common.h +++ b/drivers/usb/gadget/function/storage_common.h @@ -131,7 +131,7 @@ static inline bool fsg_lun_is_open(struct fsg_lun *curlun) #define FSG_BUFLEN ((u32)16384) /* Maximal number of LUNs supported in mass storage function */ -#define FSG_MAX_LUNS 16 +#define FSG_MAX_LUNS (US_BULK_MAX_LUN_LIMIT + 1) enum fsg_buffer_state { BUF_STATE_SENDING = -2, diff --git a/drivers/usb/gadget/function/tcm.h b/drivers/usb/gadget/function/tcm.h index 3cd5657..009974d 100644 --- a/drivers/usb/gadget/function/tcm.h +++ b/drivers/usb/gadget/function/tcm.h @@ -4,6 +4,7 @@ #include /* #include */ +#include #include #include #include @@ -13,9 +14,11 @@ #define USBG_NAMELEN 32 #define fuas_to_gadget(f) (f->function.config->cdev->gadget) -#define UASP_SS_EP_COMP_LOG_STREAMS 4 +#define UASP_SS_EP_COMP_LOG_STREAMS 5 #define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS) +#define USBG_NUM_CMDS (UASP_SS_EP_COMP_NUM_STREAMS + 1) + enum { USB_G_STR_INT_UAS = 0, USB_G_STR_INT_BBB, @@ -24,7 +27,7 @@ enum { #define USB_G_ALT_INT_BBB 0 #define USB_G_ALT_INT_UAS 1 -#define USB_G_DEFAULT_SESSION_TAGS 128 +#define USB_G_DEFAULT_SESSION_TAGS USBG_NUM_CMDS struct tcm_usbg_nexus { struct se_session *tvn_se_sess; @@ -72,15 +75,23 @@ struct usbg_cmd { struct se_cmd se_cmd; void *data_buf; /* used if no sg support available */ struct f_uas *fu; - struct completion write_complete; struct kref ref; + struct usb_request *req; + + u32 flags; +#define USBG_CMD_PENDING_DATA_WRITE BIT(0) + /* UAS only */ u16 tag; u16 prio_attr; struct sense_iu sense_iu; + struct response_iu response_iu; enum uas_state state; - struct uas_stream *stream; + + int tmr_func; + int tmr_rsp; +#define RC_RESPONSE_UNKNOWN 0xff /* BOT only */ __le32 bot_tag; @@ -93,6 +104,9 @@ struct uas_stream { struct usb_request *req_in; struct usb_request *req_out; struct usb_request *req_status; + + struct completion cmd_completion; + struct hlist_node node; }; struct usbg_cdb { @@ -116,15 +130,17 @@ struct f_uas { #define USBG_USE_STREAMS (1 << 2) #define USBG_IS_BOT (1 << 3) #define USBG_BOT_CMD_PEND (1 << 4) +#define USBG_BOT_WEDGED (1 << 5) - struct usbg_cdb cmd; + struct usbg_cdb cmd[USBG_NUM_CMDS]; struct usb_ep *ep_in; struct usb_ep *ep_out; /* UAS */ struct usb_ep *ep_status; struct usb_ep *ep_cmd; - struct uas_stream stream[UASP_SS_EP_COMP_NUM_STREAMS]; + struct uas_stream stream[USBG_NUM_CMDS]; + DECLARE_HASHTABLE(stream_hash, UASP_SS_EP_COMP_LOG_STREAMS); /* BOT */ struct bot_status bot_status; diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index bc143a8..36fff45 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -1420,10 +1421,6 @@ void gserial_disconnect(struct gserial *gser) /* REVISIT as above: how best to track this? */ port->port_line_coding = gser->port_line_coding; - /* disable endpoints, aborting down any active I/O */ - usb_ep_disable(gser->out); - usb_ep_disable(gser->in); - port->port_usb = NULL; gser->ioport = NULL; if (port->port.count > 0) { @@ -1435,6 +1432,10 @@ void gserial_disconnect(struct gserial *gser) spin_unlock(&port->port_lock); spin_unlock_irqrestore(&serial_port_lock, flags); + /* disable endpoints, aborting down any active I/O */ + usb_ep_disable(gser->out); + usb_ep_disable(gser->in); + /* finally, free any unused/unusable I/O buffers */ spin_lock_irqsave(&port->port_lock, flags); if (port->port.count == 0) @@ -1545,7 +1546,7 @@ static int __init userial_init(void) pr_debug("%s: registered %d ttyGS* device%s\n", __func__, MAX_U_SERIAL_PORTS, - (MAX_U_SERIAL_PORTS == 1) ? "" : "s"); + str_plural(MAX_U_SERIAL_PORTS)); return status; fail: diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 9c73816..b6a30d8 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -1182,7 +1183,7 @@ ep0_fasync (int f, struct file *fd, int on) { struct dev_data *dev = fd->private_data; // caller must F_SETOWN before signal delivery happens - VDEBUG (dev, "%s %s\n", __func__, on ? "on" : "off"); + VDEBUG(dev, "%s %s\n", __func__, str_on_off(on)); return fasync_helper (f, fd, on, &dev->fasync); } diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c index a63e4af..02fe1a0 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -219,7 +220,7 @@ static int ast_vhub_hub_dev_feature(struct ast_vhub_ep *ep, if (wValue == USB_DEVICE_REMOTE_WAKEUP) { ep->vhub->wakeup_en = is_set; EPDBG(ep, "Hub remote wakeup %s\n", - is_set ? "enabled" : "disabled"); + str_enabled_disabled(is_set)); return std_req_complete; } diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c index e3af4ec..aa4c610 100644 --- a/drivers/usb/gadget/udc/at91_udc.c +++ b/drivers/usb/gadget/udc/at91_udc.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -131,7 +132,7 @@ static void proc_ep_show(struct seq_file *s, struct at91_ep *ep) seq_printf(s, "csr %08x rxbytes=%d %s %s %s" EIGHTBITS "\n", csr, (csr & 0x07ff0000) >> 16, - (csr & (1 << 15)) ? "enabled" : "disabled", + str_enabled_disabled(csr & (1 << 15)), (csr & (1 << 11)) ? "DATA1" : "DATA0", types[(csr & 0x700) >> 8], diff --git a/drivers/usb/gadget/udc/cdns2/cdns2-gadget.c b/drivers/usb/gadget/udc/cdns2/cdns2-gadget.c index 62fce42..7e69944 100644 --- a/drivers/usb/gadget/udc/cdns2/cdns2-gadget.c +++ b/drivers/usb/gadget/udc/cdns2/cdns2-gadget.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -2233,12 +2234,12 @@ static int cdns2_init_eps(struct cdns2_device *pdev) dev_dbg(pdev->dev, "Init %s, SupType: CTRL: %s, INT: %s, " "BULK: %s, ISOC %s, SupDir IN: %s, OUT: %s\n", pep->name, - (pep->endpoint.caps.type_control) ? "yes" : "no", - (pep->endpoint.caps.type_int) ? "yes" : "no", - (pep->endpoint.caps.type_bulk) ? "yes" : "no", - (pep->endpoint.caps.type_iso) ? "yes" : "no", - (pep->endpoint.caps.dir_in) ? "yes" : "no", - (pep->endpoint.caps.dir_out) ? "yes" : "no"); + str_yes_no(pep->endpoint.caps.type_control), + str_yes_no(pep->endpoint.caps.type_int), + str_yes_no(pep->endpoint.caps.type_bulk), + str_yes_no(pep->endpoint.caps.type_iso), + str_yes_no(pep->endpoint.caps.dir_in), + str_yes_no(pep->endpoint.caps.dir_out)); INIT_LIST_HEAD(&pep->pending_list); INIT_LIST_HEAD(&pep->deferred_list); diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index a7e8fa4..bda08c5 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -625,7 +626,7 @@ static int dummy_enable(struct usb_ep *_ep, desc->bEndpointAddress & 0x0f, (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out", usb_ep_type_string(usb_endpoint_type(desc)), - max, ep->stream_en ? "enabled" : "disabled"); + max, str_enabled_disabled(ep->stream_en)); /* at this point real hardware should be NAKing transfers * to that endpoint, until a buffer is queued to it. diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index 8b7f7f9..4dea8bc 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -1181,7 +1182,7 @@ static int fsl_vbus_session(struct usb_gadget *gadget, int is_active) udc = container_of(gadget, struct fsl_udc, gadget); spin_lock_irqsave(&udc->lock, flags); - dev_vdbg(&gadget->dev, "VBUS %s\n", is_active ? "on" : "off"); + dev_vdbg(&gadget->dev, "VBUS %s\n", str_on_off(is_active)); udc->vbus_active = (is_active != 0); if (can_pullup(udc)) fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 698463b..8902abe 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -1252,7 +1253,7 @@ static int omap_vbus_session(struct usb_gadget *gadget, int is_active) udc = container_of(gadget, struct omap_udc, gadget); spin_lock_irqsave(&udc->lock, flags); - VDBG("VBUS %s\n", is_active ? "on" : "off"); + VDBG("VBUS %s\n", str_on_off(is_active)); udc->vbus_active = (is_active != 0); if (cpu_is_omap15xx()) { /* "software" detect, ignored if !VBUS_MODE_1510 */ diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index f9a55d4..897f536 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -1083,7 +1084,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, is_first_req = list_empty(&ep->queue); ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n", - _req, is_first_req ? "yes" : "no", + _req, str_yes_no(is_first_req), _req->length, _req->buf); if (!ep->enabled) { diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index a6c20fa..fce800b 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -2756,7 +2757,7 @@ static void ehci_port_power(struct oxu_hcd *oxu, int is_on) if (!HCS_PPC(oxu->hcs_params)) return; - oxu_dbg(oxu, "...power%s ports...\n", is_on ? "up" : "down"); + oxu_dbg(oxu, "...power%s ports...\n", str_up_down(is_on)); for (port = HCS_N_PORTS(oxu->hcs_params); port > 0; ) { if (is_on) oxu_hub_control(oxu_to_hcd(oxu), SetPortFeature, diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 036f5fd..fa2e4ba 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include @@ -98,7 +99,7 @@ static void port_power(struct sl811 *sl811, int is_on) if (sl811->board && sl811->board->port_power) { /* switch VBUS, at 500mA unless hub power budget gets set */ dev_dbg(hcd->self.controller, "power %s\n", - is_on ? "on" : "off"); + str_on_off(is_on)); sl811->board->port_power(hcd->self.controller, is_on); } diff --git a/drivers/usb/host/xhci-caps.h b/drivers/usb/host/xhci-caps.h index 9e94ceb..f6b9a00 100644 --- a/drivers/usb/host/xhci-caps.h +++ b/drivers/usb/host/xhci-caps.h @@ -83,3 +83,9 @@ #define HCC2_CIC(p) ((p) & (1 << 5)) /* true: HC support Extended TBC Capability, Isoc burst count > 65535 */ #define HCC2_ETC(p) ((p) & (1 << 6)) +/* true: HC support Extended TBC TRB Status Capability */ +#define HCC2_ETC_TSC(p) ((p) & (1 << 7)) +/* true: HC support Get/Set Extended Property Capability */ +#define HCC2_GSC(p) ((p) & (1 << 8)) +/* true: HC support Virtualization Based Trusted I/O Capability */ +#define HCC2_VTC(p) ((p) & (1 << 9)) diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 227e513..fd7895b 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -957,7 +957,7 @@ static void xhci_dbc_handle_events(struct work_struct *work) /* set fast poll rate if there are pending data transfers */ if (!list_empty(&dbc->eps[BULK_OUT].list_pending) || !list_empty(&dbc->eps[BULK_IN].list_pending)) - poll_interval = 1; + poll_interval = 0; break; default: dev_info(dbc->dev, "stop handling dbc events\n"); diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index d719c16..60ed753 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -110,15 +110,74 @@ static void dbc_start_rx(struct dbc_port *port) } } +/* + * Queue received data to tty buffer and push it. + * + * Returns nr of remaining bytes that didn't fit tty buffer, i.e. 0 if all + * bytes sucessfullt moved. In case of error returns negative errno. + * Call with lock held + */ +static int dbc_rx_push_buffer(struct dbc_port *port, struct dbc_request *req) +{ + char *packet = req->buf; + unsigned int n, size = req->actual; + int count; + + if (!req->actual) + return 0; + + /* if n_read is set then request was partially moved to tty buffer */ + n = port->n_read; + if (n) { + packet += n; + size -= n; + } + + count = tty_insert_flip_string(&port->port, packet, size); + if (count) + tty_flip_buffer_push(&port->port); + if (count != size) { + port->n_read += count; + return size - count; + } + + port->n_read = 0; + return 0; +} + static void dbc_read_complete(struct xhci_dbc *dbc, struct dbc_request *req) { unsigned long flags; struct dbc_port *port = dbc_to_port(dbc); + struct tty_struct *tty; + int untransferred; + + tty = port->port.tty; spin_lock_irqsave(&port->port_lock, flags); + + /* + * Only defer copyig data to tty buffer in case: + * - !list_empty(&port->read_queue), there are older pending data + * - tty is throttled + * - failed to copy all data to buffer, defer remaining part + */ + + if (list_empty(&port->read_queue) && tty && !tty_throttled(tty)) { + untransferred = dbc_rx_push_buffer(port, req); + if (untransferred == 0) { + list_add_tail(&req->list_pool, &port->read_pool); + if (req->status != -ESHUTDOWN) + dbc_start_rx(port); + goto out; + } + } + + /* defer moving data from req to tty buffer to a tasklet */ list_add_tail(&req->list_pool, &port->read_queue); tasklet_schedule(&port->push); +out: spin_unlock_irqrestore(&port->port_lock, flags); } @@ -331,10 +390,10 @@ static void dbc_rx_push(struct tasklet_struct *t) struct dbc_request *req; struct tty_struct *tty; unsigned long flags; - bool do_push = false; bool disconnect = false; struct dbc_port *port = from_tasklet(port, t, push); struct list_head *queue = &port->read_queue; + int untransferred; spin_lock_irqsave(&port->port_lock, flags); tty = port->port.tty; @@ -356,42 +415,15 @@ static void dbc_rx_push(struct tasklet_struct *t) break; } - if (req->actual) { - char *packet = req->buf; - unsigned int n, size = req->actual; - int count; - - n = port->n_read; - if (n) { - packet += n; - size -= n; - } - - count = tty_insert_flip_string(&port->port, packet, - size); - if (count) - do_push = true; - if (count != size) { - port->n_read += count; - break; - } - port->n_read = 0; - } + untransferred = dbc_rx_push_buffer(port, req); + if (untransferred > 0) + break; list_move_tail(&req->list_pool, &port->read_pool); } - if (do_push) - tty_flip_buffer_push(&port->port); - - if (!list_empty(queue) && tty) { - if (!tty_throttled(tty)) { - if (do_push) - tasklet_schedule(&port->push); - else - pr_warn("ttyDBC0: RX not scheduled?\n"); - } - } + if (!list_empty(queue)) + tasklet_schedule(&port->push); if (!disconnect) dbc_start_rx(port); diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index db109b5..d85ffa9 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -330,6 +330,8 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s usb3_hcd->can_do_streams = 1; if (xhci->shared_hcd) { + xhci->shared_hcd->rsrc_start = hcd->rsrc_start; + xhci->shared_hcd->rsrc_len = hcd->rsrc_len; ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); if (ret) goto put_usb3_hcd; @@ -567,6 +569,7 @@ EXPORT_SYMBOL_GPL(xhci_plat_pm_ops); static const struct acpi_device_id usb_xhci_acpi_match[] = { /* XHCI-compliant USB Controller */ { "PNP0D10", }, + { "PNP0D15", }, { } }; MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 09b05a6..965bffc 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -55,6 +55,7 @@ #include #include #include +#include #include #include "xhci.h" #include "xhci-trace.h" @@ -422,7 +423,8 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) && !(xhci->xhc_state & XHCI_STATE_DYING)) { xhci->current_cmd = cur_cmd; - xhci_mod_cmd_timer(xhci); + if (cur_cmd) + xhci_mod_cmd_timer(xhci); xhci_ring_cmd_db(xhci); } } @@ -1649,12 +1651,13 @@ static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci, NEC_FW_MINOR(le32_to_cpu(event->status))); } -static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 status) +static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 comp_code, u32 comp_param) { list_del(&cmd->cmd_list); if (cmd->completion) { - cmd->status = status; + cmd->status = comp_code; + cmd->comp_param = comp_param; complete(cmd->completion); } else { kfree(cmd); @@ -1666,7 +1669,7 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci) struct xhci_command *cur_cmd, *tmp_cmd; xhci->current_cmd = NULL; list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list) - xhci_complete_del_and_free_cmd(cur_cmd, COMP_COMMAND_ABORTED); + xhci_complete_del_and_free_cmd(cur_cmd, COMP_COMMAND_ABORTED, 0); } void xhci_handle_command_timeout(struct work_struct *work) @@ -1751,6 +1754,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, struct xhci_event_cmd *event) { unsigned int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); + u32 status = le32_to_cpu(event->status); u64 cmd_dma; dma_addr_t cmd_dequeue_dma; u32 cmd_comp_code; @@ -1879,7 +1883,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, } event_handled: - xhci_complete_del_and_free_cmd(cmd, cmd_comp_code); + xhci_complete_del_and_free_cmd(cmd, cmd_comp_code, COMP_PARAM(status)); inc_deq(xhci, xhci->cmd_ring); } @@ -3438,8 +3442,8 @@ static void check_interval(struct urb *urb, struct xhci_ep_ctx *ep_ctx) if (xhci_interval != ep_interval) { dev_dbg_ratelimited(&urb->dev->dev, "Driver uses different interval (%d microframe%s) than xHCI (%d microframe%s)\n", - ep_interval, ep_interval == 1 ? "" : "s", - xhci_interval, xhci_interval == 1 ? "" : "s"); + ep_interval, str_plural(ep_interval), + xhci_interval, str_plural(xhci_interval)); urb->interval = xhci_interval; /* Convert back to frames for LS/FS devices */ if (urb->dev->speed == USB_SPEED_LOW || diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 06ae193..22dc86f 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -724,7 +725,7 @@ static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra, if (err < 0) { dev_err(dev, "failed to %s LFPS detection on USB3#%u: %d\n", - enable ? "enable" : "disable", port, err); + str_enable_disable(enable), port, err); rsp.cmd = MBOX_CMD_NAK; } else { rsp.cmd = MBOX_CMD_ACK; @@ -1349,7 +1350,7 @@ static void tegra_xhci_id_work(struct work_struct *work) u32 status; int ret; - dev_dbg(tegra->dev, "host mode %s\n", tegra->host_mode ? "on" : "off"); + dev_dbg(tegra->dev, "host mode %s\n", str_on_off(tegra->host_mode)); mutex_lock(&tegra->lock); @@ -1667,7 +1668,7 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto put_padctl; } - if (!of_property_read_bool(pdev->dev.of_node, "power-domains")) { + if (!of_property_present(pdev->dev.of_node, "power-domains")) { tegra->host_rst = devm_reset_control_get(&pdev->dev, "xusb_host"); if (IS_ERR(tegra->host_rst)) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 5ebde8c..4565311 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -4523,7 +4524,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, hlpm_addr = ports[port_num]->addr + PORTHLPMC; xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", - enable ? "enable" : "disable", port_num + 1); + str_enable_disable(enable), port_num + 1); if (enable) { /* Host supports BESL timeout instead of HIRD */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 4914f0a..8c16434 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -529,6 +529,7 @@ struct xhci_command { /* Input context for changing device state */ struct xhci_container_ctx *in_ctx; u32 status; + u32 comp_param; int slot_id; /* If completion is null, no one is waiting on this command * and the structure can be freed after the command completes. @@ -959,6 +960,9 @@ struct xhci_event_cmd { __le32 flags; }; +/* status bitmasks */ +#define COMP_PARAM(p) ((p) & 0xffffff) /* Command Completion Parameter */ + /* Address device - disable SetAddress */ #define TRB_BSR (1<<9) diff --git a/drivers/usb/mtu3/mtu3_debugfs.c b/drivers/usb/mtu3/mtu3_debugfs.c index f0de998..9bd74c5 100644 --- a/drivers/usb/mtu3/mtu3_debugfs.c +++ b/drivers/usb/mtu3/mtu3_debugfs.c @@ -7,6 +7,7 @@ * Author: Chunfeng Yun */ +#include #include #include "mtu3.h" @@ -479,7 +480,7 @@ static int ssusb_vbus_show(struct seq_file *sf, void *unused) struct otg_switch_mtk *otg_sx = &ssusb->otg_switch; seq_printf(sf, "vbus state: %s\n(echo on/off)\n", - regulator_is_enabled(otg_sx->vbus) ? "on" : "off"); + str_on_off(regulator_is_enabled(otg_sx->vbus))); return 0; } diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c index 8191b7e..ffa5b94 100644 --- a/drivers/usb/mtu3/mtu3_dr.c +++ b/drivers/usb/mtu3/mtu3_dr.c @@ -7,6 +7,7 @@ * Author: Chunfeng Yun */ +#include #include "mtu3.h" #include "mtu3_dr.h" #include "mtu3_debug.h" @@ -109,7 +110,7 @@ int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on) if (!vbus) return 0; - dev_dbg(ssusb->dev, "%s: turn %s\n", __func__, is_on ? "on" : "off"); + dev_dbg(ssusb->dev, "%s: turn %s\n", __func__, str_on_off(is_on)); if (is_on) { ret = regulator_enable(vbus); diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c index ad0eeac..bf73fbc 100644 --- a/drivers/usb/mtu3/mtu3_gadget.c +++ b/drivers/usb/mtu3/mtu3_gadget.c @@ -7,6 +7,7 @@ * Author: Chunfeng Yun */ +#include #include "mtu3.h" #include "mtu3_trace.h" @@ -490,7 +491,7 @@ static int mtu3_gadget_pullup(struct usb_gadget *gadget, int is_on) unsigned long flags; dev_dbg(mtu->dev, "%s (%s) for %sactive device\n", __func__, - is_on ? "on" : "off", mtu->is_active ? "" : "in"); + str_on_off(is_on), mtu->is_active ? "" : "in"); pm_runtime_get_sync(mtu->dev); diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index f772aa2..26fd71a 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -306,7 +307,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) } dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", - drvvbus ? "on" : "off", + str_on_off(drvvbus), usb_otg_state_string(musb->xceiv->otg->state), err ? " ERROR" : "", devctl); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 03b1154..7f349f5 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -72,6 +72,7 @@ #include #include #include +#include #include #include #include @@ -1937,7 +1938,7 @@ vbus_show(struct device *dev, struct device_attribute *attr, char *buf) pm_runtime_put_sync(dev); return sprintf(buf, "Vbus %s, timeout %lu msec\n", - vbus ? "on" : "off", val); + str_on_off(vbus), val); } static DEVICE_ATTR_RW(vbus); diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 2542239..f877faf 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -378,7 +379,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) /* NOTE: this must complete power-on within 100 ms. */ dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", - drvvbus ? "on" : "off", + str_on_off(drvvbus), usb_otg_state_string(musb->xceiv->otg->state), err ? " ERROR" : "", devctl); diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index c6076df..6869c58 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -1606,7 +1607,7 @@ static void musb_pullup(struct musb *musb, int is_on) /* FIXME if on, HdrcStart; if off, HdrcStop */ musb_dbg(musb, "gadget D+ pullup %s", - is_on ? "on" : "off"); + str_on_off(is_on)); musb_writeb(musb->mregs, MUSB_POWER, power); } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 732ba98..6b4481a 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -1028,7 +1029,7 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) + urb->actual_length); musb_dbg(musb, "Sending %d byte%s to ep0 fifo %p", fifo_count, - (fifo_count == 1) ? "" : "s", + str_plural(fifo_count), fifo_dest); musb_write_fifo(hw_ep, fifo_count, fifo_dest); diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index 42c42e1..40ac68e 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -529,7 +530,7 @@ int fsl_otg_start_gadget(struct otg_fsm *fsm, int on) if (!otg->gadget || !otg->gadget->dev.parent) return -ENODEV; - VDBG("gadget %s\n", on ? "on" : "off"); + VDBG("gadget %s\n", str_on_off(on)); dev = otg->gadget->dev.parent; if (on) { diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c index a7a102f..30d6c88 100644 --- a/drivers/usb/phy/phy-mv-usb.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -217,7 +218,7 @@ static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on) if (!otg->gadget) return; - dev_info(mvotg->phy.dev, "gadget %s\n", on ? "on" : "off"); + dev_info(mvotg->phy.dev, "gadget %s\n", str_on_off(on)); if (on) usb_gadget_vbus_connect(otg->gadget); diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c index ae7bf3f..88607d0 100644 --- a/drivers/usb/phy/phy-tahvo.c +++ b/drivers/usb/phy/phy-tahvo.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -63,7 +64,7 @@ static ssize_t vbus_show(struct device *device, struct device_attribute *attr, char *buf) { struct tahvo_usb *tu = dev_get_drvdata(device); - return sprintf(buf, "%s\n", tu->vbus_state ? "on" : "off"); + return sprintf(buf, "%s\n", str_on_off(tu->vbus_state)); } static DEVICE_ATTR_RO(vbus); diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 1ce1345..e1435bc 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -346,13 +346,6 @@ static void devm_usb_phy_release2(struct device *dev, void *_res) usb_put_phy(res->phy); } -static int devm_usb_phy_match(struct device *dev, void *res, void *match_data) -{ - struct usb_phy **phy = res; - - return *phy == match_data; -} - static void usb_charger_init(struct usb_phy *usb_phy) { usb_phy->chg_type = UNKNOWN_TYPE; @@ -615,25 +608,6 @@ struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_phandle); /** - * devm_usb_put_phy - release the USB PHY - * @dev: device that wants to release this phy - * @phy: the phy returned by devm_usb_get_phy() - * - * destroys the devres associated with this phy and invokes usb_put_phy - * to release the phy. - * - * For use by USB host and peripheral drivers. - */ -void devm_usb_put_phy(struct device *dev, struct usb_phy *phy) -{ - int r; - - r = devres_release(dev, devm_usb_phy_release, devm_usb_phy_match, phy); - dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n"); -} -EXPORT_SYMBOL_GPL(devm_usb_put_phy); - -/** * usb_put_phy - release the USB PHY * @x: the phy returned by usb_get_phy() * diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index d10e4c4..7cc36f8 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -63,6 +63,7 @@ #define CH341_REG_DIVISOR 0x13 #define CH341_REG_LCR 0x18 #define CH341_REG_LCR2 0x25 +#define CH341_REG_FLOW_CTL 0x27 #define CH341_NBREAK_BITS 0x01 @@ -77,6 +78,9 @@ #define CH341_LCR_CS6 0x01 #define CH341_LCR_CS5 0x00 +#define CH341_FLOW_CTL_NONE 0x00 +#define CH341_FLOW_CTL_RTSCTS 0x01 + #define CH341_QUIRK_LIMITED_PRESCALER BIT(0) #define CH341_QUIRK_SIMULATE_BREAK BIT(1) @@ -478,6 +482,28 @@ err_kill_interrupt_urb: return r; } +static void ch341_set_flow_control(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + u16 flow_ctl; + int r; + + if (C_CRTSCTS(tty)) + flow_ctl = CH341_FLOW_CTL_RTSCTS; + else + flow_ctl = CH341_FLOW_CTL_NONE; + + r = ch341_control_out(port->serial->dev, + CH341_REQ_WRITE_REG, + (CH341_REG_FLOW_CTL << 8) | CH341_REG_FLOW_CTL, + (flow_ctl << 8) | flow_ctl); + if (r < 0 && old_termios) { + tty->termios.c_cflag &= ~CRTSCTS; + tty->termios.c_cflag |= (old_termios->c_cflag & CRTSCTS); + } +} + /* Old_termios contains the original termios settings and * tty->termios contains the new setting to be used. */ @@ -546,6 +572,8 @@ static void ch341_set_termios(struct tty_struct *tty, spin_unlock_irqrestore(&priv->lock, flags); ch341_set_handshake(port->serial->dev, priv->mcr); + + ch341_set_flow_control(tty, port, old_termios); } /* @@ -632,13 +660,12 @@ restore: static int ch341_break_ctl(struct tty_struct *tty, int break_state) { - const uint16_t ch341_break_reg = - ((uint16_t) CH341_REG_LCR << 8) | CH341_REG_BREAK; + const u16 ch341_break_reg = (CH341_REG_LCR << 8) | CH341_REG_BREAK; struct usb_serial_port *port = tty->driver_data; struct ch341_private *priv = usb_get_serial_port_data(port); + u16 reg_contents; + u8 break_reg[2]; int r; - uint16_t reg_contents; - uint8_t break_reg[2]; if (priv->quirks & CH341_QUIRK_SIMULATE_BREAK) return ch341_simulate_break(tty, break_state); diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index a317bdb..72fe83a 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -503,7 +503,7 @@ static void qt2_process_read_urb(struct urb *urb) newport = *(ch + 3); - if (newport > serial->num_ports) { + if (newport >= serial->num_ports) { dev_err(&port->dev, "%s - port change to invalid port: %i\n", __func__, newport); diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index d17b60a..4be1d61 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -3,8 +3,7 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" -comment "also be needed; see USB_STORAGE Help for more info" +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; see USB_STORAGE Help for more info" config USB_STORAGE tristate "USB Mass Storage support" diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 087c706..c33cbf1 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -651,8 +652,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, return USB_STOR_TRANSPORT_FAILED; usb_stor_dbg(us, "Redoing %s\n", - direction == DMA_TO_DEVICE - ? "write" : "read"); + str_write_read(direction == DMA_TO_DEVICE)); } else if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 9d767f6..e6bc8ec 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -1087,13 +1087,9 @@ int usb_stor_Bulk_max_lun(struct us_data *us) usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n", result, us->iobuf[0]); - /* - * If we have a successful request, return the result if valid. The - * CBW LUN field is 4 bits wide, so the value reported by the device - * should fit into that. - */ + /* If we have a successful request, return the result if valid. */ if (result > 0) { - if (us->iobuf[0] < 16) { + if (us->iobuf[0] <= US_BULK_MAX_LUN_LIMIT) { return us->iobuf[0]; } else { dev_info(&us->pusb_intf->dev, diff --git a/drivers/usb/typec/altmodes/Kconfig b/drivers/usb/typec/altmodes/Kconfig index 1a6b5e8..7867fa7 100644 --- a/drivers/usb/typec/altmodes/Kconfig +++ b/drivers/usb/typec/altmodes/Kconfig @@ -23,4 +23,13 @@ config TYPEC_NVIDIA_ALTMODE To compile this driver as a module, choose M here: the module will be called typec_nvidia. +config TYPEC_TBT_ALTMODE + tristate "Thunderbolt3 Alternate Mode driver" + help + Select this option if you have Thunderbolt3 hardware on your + system. + + To compile this driver as a module, choose M here: the + module will be called typec_thunderbolt. + endmenu diff --git a/drivers/usb/typec/altmodes/Makefile b/drivers/usb/typec/altmodes/Makefile index 4571754..508a683 100644 --- a/drivers/usb/typec/altmodes/Makefile +++ b/drivers/usb/typec/altmodes/Makefile @@ -4,3 +4,5 @@ obj-$(CONFIG_TYPEC_DP_ALTMODE) += typec_displayport.o typec_displayport-y := displayport.o obj-$(CONFIG_TYPEC_NVIDIA_ALTMODE) += typec_nvidia.o typec_nvidia-y := nvidia.o +obj-$(CONFIG_TYPEC_TBT_ALTMODE) += typec_thunderbolt.o +typec_thunderbolt-y := thunderbolt.o diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index 2f03190..ac84a6d 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -252,7 +252,7 @@ static void dp_altmode_work(struct work_struct *work) case DP_STATE_ENTER: ret = typec_altmode_enter(dp->alt, NULL); if (ret && ret != -EBUSY) - dev_err(&dp->alt->dev, "failed to enter mode\n"); + dev_err(&dp->alt->dev, "failed to enter mode: %d\n", ret); break; case DP_STATE_ENTER_PRIME: ret = typec_cable_altmode_enter(dp->alt, TYPEC_PLUG_SOP_P, NULL); @@ -791,7 +791,7 @@ void dp_altmode_remove(struct typec_altmode *alt) EXPORT_SYMBOL_GPL(dp_altmode_remove); static const struct typec_device_id dp_typec_id[] = { - { USB_TYPEC_DP_SID, USB_TYPEC_DP_MODE }, + { USB_TYPEC_DP_SID }, { }, }; MODULE_DEVICE_TABLE(typec, dp_typec_id); diff --git a/drivers/usb/typec/altmodes/nvidia.c b/drivers/usb/typec/altmodes/nvidia.c index fe70b36..2b77d93 100644 --- a/drivers/usb/typec/altmodes/nvidia.c +++ b/drivers/usb/typec/altmodes/nvidia.c @@ -24,7 +24,7 @@ static void nvidia_altmode_remove(struct typec_altmode *alt) } static const struct typec_device_id nvidia_typec_id[] = { - { USB_TYPEC_NVIDIA_VLINK_SID, TYPEC_ANY_MODE }, + { USB_TYPEC_NVIDIA_VLINK_SID }, { }, }; MODULE_DEVICE_TABLE(typec, nvidia_typec_id); diff --git a/drivers/usb/typec/altmodes/thunderbolt.c b/drivers/usb/typec/altmodes/thunderbolt.c new file mode 100644 index 0000000..1b475b1 --- /dev/null +++ b/drivers/usb/typec/altmodes/thunderbolt.c @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB Typec-C Thunderbolt3 Alternate Mode driver + * + * Copyright (C) 2019 Intel Corporation + * Author: Heikki Krogerus + */ + +#include +#include +#include +#include +#include +#include +#include + +enum tbt_state { + TBT_STATE_IDLE, + TBT_STATE_SOP_P_ENTER, + TBT_STATE_SOP_PP_ENTER, + TBT_STATE_ENTER, + TBT_STATE_EXIT, + TBT_STATE_SOP_PP_EXIT, + TBT_STATE_SOP_P_EXIT +}; + +struct tbt_altmode { + enum tbt_state state; + struct typec_cable *cable; + struct typec_altmode *alt; + struct typec_altmode *plug[2]; + u32 enter_vdo; + + struct work_struct work; + struct mutex lock; /* device lock */ +}; + +static bool tbt_ready(struct typec_altmode *alt); + +static int tbt_enter_mode(struct tbt_altmode *tbt) +{ + struct typec_altmode *plug = tbt->plug[TYPEC_PLUG_SOP_P]; + u32 vdo; + + vdo = tbt->alt->vdo & (TBT_VENDOR_SPECIFIC_B0 | TBT_VENDOR_SPECIFIC_B1); + vdo |= tbt->alt->vdo & TBT_INTEL_SPECIFIC_B0; + vdo |= TBT_MODE; + + if (plug) { + if (typec_cable_is_active(tbt->cable)) + vdo |= TBT_ENTER_MODE_ACTIVE_CABLE; + + vdo |= TBT_ENTER_MODE_CABLE_SPEED(TBT_CABLE_SPEED(plug->vdo)); + vdo |= plug->vdo & TBT_CABLE_ROUNDED; + vdo |= plug->vdo & TBT_CABLE_OPTICAL; + vdo |= plug->vdo & TBT_CABLE_RETIMER; + vdo |= plug->vdo & TBT_CABLE_LINK_TRAINING; + } else { + vdo |= TBT_ENTER_MODE_CABLE_SPEED(TBT_CABLE_USB3_PASSIVE); + } + + tbt->enter_vdo = vdo; + return typec_altmode_enter(tbt->alt, &vdo); +} + +static void tbt_altmode_work(struct work_struct *work) +{ + struct tbt_altmode *tbt = container_of(work, struct tbt_altmode, work); + int ret; + + mutex_lock(&tbt->lock); + + switch (tbt->state) { + case TBT_STATE_SOP_P_ENTER: + ret = typec_cable_altmode_enter(tbt->alt, TYPEC_PLUG_SOP_P, NULL); + if (ret) { + dev_dbg(&tbt->plug[TYPEC_PLUG_SOP_P]->dev, + "failed to enter mode (%d)\n", ret); + goto disable_plugs; + } + break; + case TBT_STATE_SOP_PP_ENTER: + ret = typec_cable_altmode_enter(tbt->alt, TYPEC_PLUG_SOP_PP, NULL); + if (ret) { + dev_dbg(&tbt->plug[TYPEC_PLUG_SOP_PP]->dev, + "failed to enter mode (%d)\n", ret); + goto disable_plugs; + } + break; + case TBT_STATE_ENTER: + ret = tbt_enter_mode(tbt); + if (ret) + dev_dbg(&tbt->alt->dev, "failed to enter mode (%d)\n", + ret); + break; + case TBT_STATE_EXIT: + typec_altmode_exit(tbt->alt); + break; + case TBT_STATE_SOP_PP_EXIT: + typec_cable_altmode_exit(tbt->alt, TYPEC_PLUG_SOP_PP); + break; + case TBT_STATE_SOP_P_EXIT: + typec_cable_altmode_exit(tbt->alt, TYPEC_PLUG_SOP_P); + break; + default: + break; + } + + tbt->state = TBT_STATE_IDLE; + + mutex_unlock(&tbt->lock); + return; + +disable_plugs: + for (int i = TYPEC_PLUG_SOP_PP; i > 0; --i) { + if (tbt->plug[i]) + typec_altmode_put_plug(tbt->plug[i]); + + tbt->plug[i] = NULL; + } + + tbt->state = TBT_STATE_ENTER; + schedule_work(&tbt->work); + mutex_unlock(&tbt->lock); +} + +/* + * If SOP' is available, enter that first (which will trigger a VDM response + * that will enter SOP" if available and then the port). If entering SOP' fails, + * stop attempting to enter either cable altmode (probably not supported) and + * directly enter the port altmode. + */ +static int tbt_enter_modes_ordered(struct typec_altmode *alt) +{ + struct tbt_altmode *tbt = typec_altmode_get_drvdata(alt); + int ret = 0; + + lockdep_assert_held(&tbt->lock); + + if (!tbt_ready(tbt->alt)) + return -ENODEV; + + if (tbt->plug[TYPEC_PLUG_SOP_P]) { + ret = typec_cable_altmode_enter(alt, TYPEC_PLUG_SOP_P, NULL); + if (ret < 0) { + for (int i = TYPEC_PLUG_SOP_PP; i > 0; --i) { + if (tbt->plug[i]) + typec_altmode_put_plug(tbt->plug[i]); + + tbt->plug[i] = NULL; + } + } else { + return ret; + } + } + + return tbt_enter_mode(tbt); +} + +static int tbt_cable_altmode_vdm(struct typec_altmode *alt, + enum typec_plug_index sop, const u32 hdr, + const u32 *vdo, int count) +{ + struct tbt_altmode *tbt = typec_altmode_get_drvdata(alt); + int cmd_type = PD_VDO_CMDT(hdr); + int cmd = PD_VDO_CMD(hdr); + + mutex_lock(&tbt->lock); + + if (tbt->state != TBT_STATE_IDLE) { + mutex_unlock(&tbt->lock); + return -EBUSY; + } + + switch (cmd_type) { + case CMDT_RSP_ACK: + switch (cmd) { + case CMD_ENTER_MODE: + /* + * Following the order described in USB Type-C Spec + * R2.0 Section 6.7.3: SOP', SOP", then port. + */ + if (sop == TYPEC_PLUG_SOP_P) { + if (tbt->plug[TYPEC_PLUG_SOP_PP]) + tbt->state = TBT_STATE_SOP_PP_ENTER; + else + tbt->state = TBT_STATE_ENTER; + } else if (sop == TYPEC_PLUG_SOP_PP) + tbt->state = TBT_STATE_ENTER; + + break; + case CMD_EXIT_MODE: + /* Exit in opposite order: Port, SOP", then SOP'. */ + if (sop == TYPEC_PLUG_SOP_PP) + tbt->state = TBT_STATE_SOP_P_EXIT; + break; + } + break; + default: + break; + } + + if (tbt->state != TBT_STATE_IDLE) + schedule_work(&tbt->work); + + mutex_unlock(&tbt->lock); + return 0; +} + +static int tbt_altmode_vdm(struct typec_altmode *alt, + const u32 hdr, const u32 *vdo, int count) +{ + struct tbt_altmode *tbt = typec_altmode_get_drvdata(alt); + struct typec_thunderbolt_data data; + int cmd_type = PD_VDO_CMDT(hdr); + int cmd = PD_VDO_CMD(hdr); + + mutex_lock(&tbt->lock); + + if (tbt->state != TBT_STATE_IDLE) { + mutex_unlock(&tbt->lock); + return -EBUSY; + } + + switch (cmd_type) { + case CMDT_RSP_ACK: + /* Port altmode is last to enter and first to exit. */ + switch (cmd) { + case CMD_ENTER_MODE: + memset(&data, 0, sizeof(data)); + + data.device_mode = tbt->alt->vdo; + data.enter_vdo = tbt->enter_vdo; + if (tbt->plug[TYPEC_PLUG_SOP_P]) + data.cable_mode = tbt->plug[TYPEC_PLUG_SOP_P]->vdo; + + typec_altmode_notify(alt, TYPEC_STATE_MODAL, &data); + break; + case CMD_EXIT_MODE: + if (tbt->plug[TYPEC_PLUG_SOP_PP]) + tbt->state = TBT_STATE_SOP_PP_EXIT; + else if (tbt->plug[TYPEC_PLUG_SOP_P]) + tbt->state = TBT_STATE_SOP_P_EXIT; + break; + } + break; + case CMDT_RSP_NAK: + switch (cmd) { + case CMD_ENTER_MODE: + dev_warn(&alt->dev, "Enter Mode refused\n"); + break; + default: + break; + } + break; + default: + break; + } + + if (tbt->state != TBT_STATE_IDLE) + schedule_work(&tbt->work); + + mutex_unlock(&tbt->lock); + + return 0; +} + +static int tbt_altmode_activate(struct typec_altmode *alt, int activate) +{ + struct tbt_altmode *tbt = typec_altmode_get_drvdata(alt); + int ret; + + mutex_lock(&tbt->lock); + + if (activate) + ret = tbt_enter_modes_ordered(alt); + else + ret = typec_altmode_exit(alt); + + mutex_unlock(&tbt->lock); + + return ret; +} + +static const struct typec_altmode_ops tbt_altmode_ops = { + .vdm = tbt_altmode_vdm, + .activate = tbt_altmode_activate +}; + +static const struct typec_cable_ops tbt_cable_ops = { + .vdm = tbt_cable_altmode_vdm, +}; + +static int tbt_altmode_probe(struct typec_altmode *alt) +{ + struct tbt_altmode *tbt; + + tbt = devm_kzalloc(&alt->dev, sizeof(*tbt), GFP_KERNEL); + if (!tbt) + return -ENOMEM; + + INIT_WORK(&tbt->work, tbt_altmode_work); + mutex_init(&tbt->lock); + tbt->alt = alt; + + alt->desc = "Thunderbolt3"; + typec_altmode_set_drvdata(alt, tbt); + typec_altmode_set_ops(alt, &tbt_altmode_ops); + + if (tbt_ready(alt)) { + if (tbt->plug[TYPEC_PLUG_SOP_P]) + tbt->state = TBT_STATE_SOP_P_ENTER; + else if (tbt->plug[TYPEC_PLUG_SOP_PP]) + tbt->state = TBT_STATE_SOP_PP_ENTER; + else + tbt->state = TBT_STATE_ENTER; + schedule_work(&tbt->work); + } + + return 0; +} + +static void tbt_altmode_remove(struct typec_altmode *alt) +{ + struct tbt_altmode *tbt = typec_altmode_get_drvdata(alt); + + for (int i = TYPEC_PLUG_SOP_PP; i > 0; --i) { + if (tbt->plug[i]) + typec_altmode_put_plug(tbt->plug[i]); + } + + if (tbt->cable) + typec_cable_put(tbt->cable); +} + +static bool tbt_ready(struct typec_altmode *alt) +{ + struct tbt_altmode *tbt = typec_altmode_get_drvdata(alt); + struct typec_altmode *plug; + + if (tbt->cable) + return true; + + /* Thunderbolt 3 requires a cable with eMarker */ + tbt->cable = typec_cable_get(typec_altmode2port(tbt->alt)); + if (!tbt->cable) + return false; + + /* We accept systems without SOP' or SOP''. This means the port altmode + * driver will be responsible for properly ordering entry/exit. + */ + for (int i = 0; i < TYPEC_PLUG_SOP_PP + 1; i++) { + plug = typec_altmode_get_plug(tbt->alt, i); + if (IS_ERR(plug)) + continue; + + if (!plug || plug->svid != USB_TYPEC_TBT_SID) + break; + + plug->desc = "Thunderbolt3"; + plug->cable_ops = &tbt_cable_ops; + typec_altmode_set_drvdata(plug, tbt); + + tbt->plug[i] = plug; + } + + return true; +} + +static const struct typec_device_id tbt_typec_id[] = { + { USB_TYPEC_TBT_SID }, + { } +}; +MODULE_DEVICE_TABLE(typec, tbt_typec_id); + +static struct typec_altmode_driver tbt_altmode_driver = { + .id_table = tbt_typec_id, + .probe = tbt_altmode_probe, + .remove = tbt_altmode_remove, + .driver = { + .name = "typec-thunderbolt", + } +}; +module_typec_altmode_driver(tbt_altmode_driver); + +MODULE_AUTHOR("Heikki Krogerus "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Thunderbolt3 USB Type-C Alternate Mode"); diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c index aa87925..ae90688 100644 --- a/drivers/usb/typec/bus.c +++ b/drivers/usb/typec/bus.c @@ -454,8 +454,7 @@ static int typec_match(struct device *dev, const struct device_driver *driver) const struct typec_device_id *id; for (id = drv->id_table; id->svid; id++) - if (id->svid == altmode->svid && - (id->mode == TYPEC_ANY_MODE || id->mode == altmode->mode)) + if (id->svid == altmode->svid) return 1; return 0; } @@ -470,8 +469,7 @@ static int typec_uevent(const struct device *dev, struct kobj_uevent_env *env) if (add_uevent_var(env, "MODE=%u", altmode->mode)) return -ENOMEM; - return add_uevent_var(env, "MODALIAS=typec:id%04Xm%02X", - altmode->svid, altmode->mode); + return add_uevent_var(env, "MODALIAS=typec:id%04X", altmode->svid); } static int typec_altmode_create_links(struct altmode *alt) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 4b3047e..a137e10 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -237,13 +238,13 @@ static int altmode_match(struct device *dev, void *data) if (!is_typec_altmode(dev)) return 0; - return ((adev->svid == id->svid) && (adev->mode == id->mode)); + return (adev->svid == id->svid); } static void typec_altmode_set_partner(struct altmode *altmode) { struct typec_altmode *adev = &altmode->adev; - struct typec_device_id id = { adev->svid, adev->mode, }; + struct typec_device_id id = { adev->svid }; struct typec_port *port = typec_altmode2port(adev); struct altmode *partner; struct device *dev; @@ -361,7 +362,7 @@ active_show(struct device *dev, struct device_attribute *attr, char *buf) { struct typec_altmode *alt = to_typec_altmode(dev); - return sprintf(buf, "%s\n", alt->active ? "yes" : "no"); + return sprintf(buf, "%s\n", str_yes_no(alt->active)); } static ssize_t active_store(struct device *dev, struct device_attribute *attr, @@ -458,7 +459,8 @@ static umode_t typec_altmode_attr_is_visible(struct kobject *kobj, struct typec_altmode *adev = to_typec_altmode(kobj_to_dev(kobj)); if (attr == &dev_attr_active.attr) - if (!adev->ops || !adev->ops->activate) + if (!is_typec_port(adev->dev.parent) && + (!adev->ops || !adev->ops->activate)) return 0444; return attr->mode; @@ -563,7 +565,7 @@ typec_register_altmode(struct device *parent, if (is_port) { alt->attrs[3] = &dev_attr_supported_roles.attr; - alt->adev.active = true; /* Enabled by default */ + alt->adev.active = !desc->inactive; /* Enabled by default */ } sprintf(alt->group_name, "mode%d", desc->mode); @@ -706,7 +708,7 @@ static ssize_t supports_usb_power_delivery_show(struct device *dev, { struct typec_partner *p = to_typec_partner(dev); - return sprintf(buf, "%s\n", p->usb_pd ? "yes" : "no"); + return sprintf(buf, "%s\n", str_yes_no(p->usb_pd)); } static DEVICE_ATTR_RO(supports_usb_power_delivery); @@ -1858,7 +1860,7 @@ static ssize_t vconn_source_show(struct device *dev, struct typec_port *port = to_typec_port(dev); return sprintf(buf, "%s\n", - port->vconn_role == TYPEC_SOURCE ? "yes" : "no"); + str_yes_no(port->vconn_role == TYPEC_SOURCE)); } static DEVICE_ATTR_RW(vconn_source); diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c index fb1242e..3ecc688 100644 --- a/drivers/usb/typec/hd3ss3220.c +++ b/drivers/usb/typec/hd3ss3220.c @@ -16,10 +16,17 @@ #include #include +#define HD3SS3220_REG_CN_STAT 0x08 #define HD3SS3220_REG_CN_STAT_CTRL 0x09 #define HD3SS3220_REG_GEN_CTRL 0x0A #define HD3SS3220_REG_DEV_REV 0xA0 +/* Register HD3SS3220_REG_CN_STAT */ +#define HD3SS3220_REG_CN_STAT_CURRENT_MODE_MASK (BIT(7) | BIT(6)) +#define HD3SS3220_REG_CN_STAT_CURRENT_MODE_DEFAULT 0x00 +#define HD3SS3220_REG_CN_STAT_CURRENT_MODE_MID BIT(6) +#define HD3SS3220_REG_CN_STAT_CURRENT_MODE_HIGH BIT(7) + /* Register HD3SS3220_REG_CN_STAT_CTRL*/ #define HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK (BIT(7) | BIT(6)) #define HD3SS3220_REG_CN_STAT_CTRL_AS_DFP BIT(6) @@ -28,10 +35,16 @@ #define HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS BIT(4) /* Register HD3SS3220_REG_GEN_CTRL*/ +#define HD3SS3220_REG_GEN_CTRL_DISABLE_TERM BIT(0) #define HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK (BIT(2) | BIT(1)) #define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT 0x00 #define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK BIT(1) #define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC (BIT(2) | BIT(1)) +#define HD3SS3220_REG_GEN_CTRL_MODE_SELECT_MASK (BIT(5) | BIT(4)) +#define HD3SS3220_REG_GEN_CTRL_MODE_SELECT_DEFAULT 0x00 +#define HD3SS3220_REG_GEN_CTRL_MODE_SELECT_DFP BIT(5) +#define HD3SS3220_REG_GEN_CTRL_MODE_SELECT_UFP BIT(4) +#define HD3SS3220_REG_GEN_CTRL_MODE_SELECT_DRP (BIT(5) | BIT(4)) struct hd3ss3220 { struct device *dev; @@ -43,8 +56,96 @@ struct hd3ss3220 { bool poll; }; -static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int src_pref) +static int hd3ss3220_set_power_opmode(struct hd3ss3220 *hd3ss3220, int power_opmode) +{ + int current_mode; + + switch (power_opmode) { + case TYPEC_PWR_MODE_USB: + current_mode = HD3SS3220_REG_CN_STAT_CURRENT_MODE_DEFAULT; + break; + case TYPEC_PWR_MODE_1_5A: + current_mode = HD3SS3220_REG_CN_STAT_CURRENT_MODE_MID; + break; + case TYPEC_PWR_MODE_3_0A: + current_mode = HD3SS3220_REG_CN_STAT_CURRENT_MODE_HIGH; + break; + case TYPEC_PWR_MODE_PD: /* Power delivery not supported */ + default: + dev_err(hd3ss3220->dev, "bad power operation mode: %d\n", power_opmode); + return -EINVAL; + } + + return regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT, + HD3SS3220_REG_CN_STAT_CURRENT_MODE_MASK, + current_mode); +} + +static int hd3ss3220_set_port_type(struct hd3ss3220 *hd3ss3220, int type) +{ + int mode_select, err; + + switch (type) { + case TYPEC_PORT_SRC: + mode_select = HD3SS3220_REG_GEN_CTRL_MODE_SELECT_DFP; + break; + case TYPEC_PORT_SNK: + mode_select = HD3SS3220_REG_GEN_CTRL_MODE_SELECT_UFP; + break; + case TYPEC_PORT_DRP: + mode_select = HD3SS3220_REG_GEN_CTRL_MODE_SELECT_DRP; + break; + default: + dev_err(hd3ss3220->dev, "bad port type: %d\n", type); + return -EINVAL; + } + + /* Disable termination before changing MODE_SELECT as required by datasheet */ + err = regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL, + HD3SS3220_REG_GEN_CTRL_DISABLE_TERM, + HD3SS3220_REG_GEN_CTRL_DISABLE_TERM); + if (err < 0) { + dev_err(hd3ss3220->dev, "Failed to disable port for mode change: %d\n", err); + return err; + } + + err = regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL, + HD3SS3220_REG_GEN_CTRL_MODE_SELECT_MASK, + mode_select); + if (err < 0) { + dev_err(hd3ss3220->dev, "Failed to change mode: %d\n", err); + regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL, + HD3SS3220_REG_GEN_CTRL_DISABLE_TERM, 0); + return err; + } + + err = regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL, + HD3SS3220_REG_GEN_CTRL_DISABLE_TERM, 0); + if (err < 0) + dev_err(hd3ss3220->dev, "Failed to re-enable port after mode change: %d\n", err); + + return err; +} + +static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int prefer_role) { + int src_pref; + + switch (prefer_role) { + case TYPEC_NO_PREFERRED_ROLE: + src_pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT; + break; + case TYPEC_SINK: + src_pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK; + break; + case TYPEC_SOURCE: + src_pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC; + break; + default: + dev_err(hd3ss3220->dev, "bad role preference: %d\n", prefer_role); + return -EINVAL; + } + return regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL, HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK, src_pref); @@ -76,31 +177,23 @@ static enum usb_role hd3ss3220_get_attached_state(struct hd3ss3220 *hd3ss3220) return attached_state; } -static int hd3ss3220_dr_set(struct typec_port *port, enum typec_data_role role) +static int hd3ss3220_try_role(struct typec_port *port, int role) { struct hd3ss3220 *hd3ss3220 = typec_get_drvdata(port); - enum usb_role role_val; - int pref, ret = 0; - if (role == TYPEC_HOST) { - role_val = USB_ROLE_HOST; - pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC; - } else { - role_val = USB_ROLE_DEVICE; - pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK; - } - - ret = hd3ss3220_set_source_pref(hd3ss3220, pref); - usleep_range(10, 100); + return hd3ss3220_set_source_pref(hd3ss3220, role); +} - usb_role_switch_set_role(hd3ss3220->role_sw, role_val); - typec_set_data_role(hd3ss3220->port, role); +static int hd3ss3220_port_type_set(struct typec_port *port, enum typec_port_type type) +{ + struct hd3ss3220 *hd3ss3220 = typec_get_drvdata(port); - return ret; + return hd3ss3220_set_port_type(hd3ss3220, type); } static const struct typec_operations hd3ss3220_ops = { - .dr_set = hd3ss3220_dr_set + .try_role = hd3ss3220_try_role, + .port_type_set = hd3ss3220_port_type_set, }; static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220) @@ -108,9 +201,6 @@ static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220) enum usb_role role_state = hd3ss3220_get_attached_state(hd3ss3220); usb_role_switch_set_role(hd3ss3220->role_sw, role_state); - if (role_state == USB_ROLE_NONE) - hd3ss3220_set_source_pref(hd3ss3220, - HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); switch (role_state) { case USB_ROLE_HOST: @@ -162,6 +252,67 @@ static irqreturn_t hd3ss3220_irq_handler(int irq, void *data) return hd3ss3220_irq(hd3ss3220); } +static int hd3ss3220_configure_power_opmode(struct hd3ss3220 *hd3ss3220, + struct fwnode_handle *connector) +{ + /* + * Supported power operation mode can be configured through device tree + */ + const char *cap_str; + int ret, power_opmode; + + ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str); + if (ret) + return 0; + + power_opmode = typec_find_pwr_opmode(cap_str); + return hd3ss3220_set_power_opmode(hd3ss3220, power_opmode); +} + +static int hd3ss3220_configure_port_type(struct hd3ss3220 *hd3ss3220, + struct fwnode_handle *connector, + struct typec_capability *cap) +{ + /* + * Port type can be configured through device tree + */ + const char *cap_str; + int ret; + + ret = fwnode_property_read_string(connector, "power-role", &cap_str); + if (ret) + return 0; + + ret = typec_find_port_power_role(cap_str); + if (ret < 0) + return ret; + + cap->type = ret; + return hd3ss3220_set_port_type(hd3ss3220, cap->type); +} + +static int hd3ss3220_configure_source_pref(struct hd3ss3220 *hd3ss3220, + struct fwnode_handle *connector, + struct typec_capability *cap) +{ + /* + * Preferred role can be configured through device tree + */ + const char *cap_str; + int ret; + + ret = fwnode_property_read_string(connector, "try-power-role", &cap_str); + if (ret) + return 0; + + ret = typec_find_power_role(cap_str); + if (ret < 0) + return ret; + + cap->prefer_role = ret; + return hd3ss3220_set_source_pref(hd3ss3220, cap->prefer_role); +} + static const struct regmap_config config = { .reg_bits = 8, .val_bits = 8, @@ -188,8 +339,6 @@ static int hd3ss3220_probe(struct i2c_client *client) if (IS_ERR(hd3ss3220->regmap)) return PTR_ERR(hd3ss3220->regmap); - hd3ss3220_set_source_pref(hd3ss3220, - HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); /* For backward compatibility check the connector child node first */ connector = device_get_named_child_node(hd3ss3220->dev, "connector"); if (connector) { @@ -217,12 +366,24 @@ static int hd3ss3220_probe(struct i2c_client *client) typec_cap.ops = &hd3ss3220_ops; typec_cap.fwnode = connector; + ret = hd3ss3220_configure_source_pref(hd3ss3220, connector, &typec_cap); + if (ret < 0) + goto err_put_role; + + ret = hd3ss3220_configure_port_type(hd3ss3220, connector, &typec_cap); + if (ret < 0) + goto err_put_role; + hd3ss3220->port = typec_register_port(&client->dev, &typec_cap); if (IS_ERR(hd3ss3220->port)) { ret = PTR_ERR(hd3ss3220->port); goto err_put_role; } + ret = hd3ss3220_configure_power_opmode(hd3ss3220, connector); + if (ret < 0) + goto err_unreg_port; + hd3ss3220_set_role(hd3ss3220); ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, &data); if (ret < 0) diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index 5dfe957..65dda91 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -718,7 +718,7 @@ DEFINE_SHOW_ATTRIBUTE(port_iom_status); static void pmc_mux_port_debugfs_init(struct pmc_usb_port *port) { struct dentry *debugfs_dir; - char name[6]; + char name[8]; snprintf(name, sizeof(name), "port%d", port->usb3_port - 1); diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index e2fe479..f15c63d 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -733,7 +734,7 @@ static int tcpm_set_vconn(struct tcpc_dev *dev, bool on) mutex_lock(&chip->lock); if (chip->vconn_on == on) { - fusb302_log(chip, "vconn is already %s", on ? "On" : "Off"); + fusb302_log(chip, "vconn is already %s", str_on_off(on)); goto done; } if (on) { @@ -746,7 +747,7 @@ static int tcpm_set_vconn(struct tcpc_dev *dev, bool on) if (ret < 0) goto done; chip->vconn_on = on; - fusb302_log(chip, "vconn := %s", on ? "On" : "Off"); + fusb302_log(chip, "vconn := %s", str_on_off(on)); done: mutex_unlock(&chip->lock); @@ -761,7 +762,7 @@ static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge) mutex_lock(&chip->lock); if (chip->vbus_on == on) { - fusb302_log(chip, "vbus is already %s", on ? "On" : "Off"); + fusb302_log(chip, "vbus is already %s", str_on_off(on)); } else { if (on) ret = regulator_enable(chip->vbus); @@ -769,15 +770,14 @@ static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge) ret = regulator_disable(chip->vbus); if (ret < 0) { fusb302_log(chip, "cannot %s vbus regulator, ret=%d", - on ? "enable" : "disable", ret); + str_enable_disable(on), ret); goto done; } chip->vbus_on = on; - fusb302_log(chip, "vbus := %s", on ? "On" : "Off"); + fusb302_log(chip, "vbus := %s", str_on_off(on)); } if (chip->charge_on == charge) - fusb302_log(chip, "charge is already %s", - charge ? "On" : "Off"); + fusb302_log(chip, "charge is already %s", str_on_off(charge)); else chip->charge_on = charge; @@ -854,16 +854,16 @@ static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on) ret = fusb302_pd_set_auto_goodcrc(chip, on); if (ret < 0) { fusb302_log(chip, "cannot turn %s auto GCRC, ret=%d", - on ? "on" : "off", ret); + str_on_off(on), ret); goto done; } ret = fusb302_pd_set_interrupts(chip, on); if (ret < 0) { fusb302_log(chip, "cannot turn %s pd interrupts, ret=%d", - on ? "on" : "off", ret); + str_on_off(on), ret); goto done; } - fusb302_log(chip, "pd := %s", on ? "on" : "off"); + fusb302_log(chip, "pd := %s", str_on_off(on)); done: mutex_unlock(&chip->lock); @@ -1531,7 +1531,7 @@ static void fusb302_irq_work(struct work_struct *work) if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) { vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK); fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s", - vbus_present ? "On" : "Off"); + str_on_off(vbus_present)); if (vbus_present != chip->vbus_present) { chip->vbus_present = vbus_present; tcpm_vbus_change(chip->tcpm_port); @@ -1562,7 +1562,7 @@ static void fusb302_irq_work(struct work_struct *work) if ((interrupt & FUSB_REG_INTERRUPT_COMP_CHNG) && intr_comp_chng) { comp_result = !!(status0 & FUSB_REG_STATUS0_COMP); fusb302_log(chip, "IRQ: COMP_CHNG, comp=%s", - comp_result ? "true" : "false"); + str_true_false(comp_result)); if (comp_result) { /* cc level > Rd_threshold, detach */ chip->cc1 = TYPEC_CC_OPEN; diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c index 7264236..18303b3 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include "qcom_pmic_typec.h" @@ -418,7 +419,7 @@ static int qcom_pmic_typec_pdphy_set_pd_rx(struct tcpc_dev *tcpc, bool on) spin_unlock_irqrestore(&pmic_typec_pdphy->lock, flags); - dev_dbg(pmic_typec_pdphy->dev, "set_pd_rx: %s\n", on ? "on" : "off"); + dev_dbg(pmic_typec_pdphy->dev, "set_pd_rx: %s\n", str_on_off(on)); return ret; } diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c index df79059..8fac171 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include "qcom_pmic_typec.h" @@ -38,7 +39,7 @@ static int qcom_pmic_typec_pdphy_stub_set_pd_rx(struct tcpc_dev *tcpc, bool on) struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); struct device *dev = tcpm->dev; - dev_dbg(dev, "set_pd_rx: %s\n", on ? "on" : "off"); + dev_dbg(dev, "set_pd_rx: %s\n", str_on_off(on)); return 0; } diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c index c37dede..4fc83dc 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -562,7 +563,8 @@ done: spin_unlock_irqrestore(&pmic_typec_port->lock, flags); dev_dbg(dev, "set_vconn: orientation %d control 0x%08x state %s cc %s vconn %s\n", - orientation, value, on ? "on" : "off", misc_to_vconn(misc), misc_to_cc(misc)); + orientation, value, str_on_off(on), misc_to_vconn(misc), + misc_to_cc(misc)); return ret; } diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index 24a6a43..19ab664 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -27,6 +27,7 @@ #define VPPS_NEW_MIN_PERCENT 95 #define VPPS_VALID_MIN_MV 100 #define VSINKDISCONNECT_PD_MIN_PERCENT 90 +#define VPPS_SHUTDOWN_MIN_PERCENT 85 struct tcpci { struct device *dev; @@ -282,7 +283,7 @@ static int tcpci_set_polarity(struct tcpc_dev *tcpc, if (cc2 == TYPEC_CC_RD) /* Role control would have the Rp setting when DRP was enabled */ reg |= FIELD_PREP(TCPC_ROLE_CTRL_CC2, TCPC_ROLE_CTRL_CC_RP); - else + else if (cc2 >= TYPEC_CC_RP_DEF) reg |= FIELD_PREP(TCPC_ROLE_CTRL_CC2, TCPC_ROLE_CTRL_CC_RD); } else { reg &= ~TCPC_ROLE_CTRL_CC1; @@ -290,7 +291,7 @@ static int tcpci_set_polarity(struct tcpc_dev *tcpc, if (cc1 == TYPEC_CC_RD) /* Role control would have the Rp setting when DRP was enabled */ reg |= FIELD_PREP(TCPC_ROLE_CTRL_CC1, TCPC_ROLE_CTRL_CC_RP); - else + else if (cc1 >= TYPEC_CC_RP_DEF) reg |= FIELD_PREP(TCPC_ROLE_CTRL_CC1, TCPC_ROLE_CTRL_CC_RD); } } @@ -366,7 +367,8 @@ static int tcpci_enable_auto_vbus_discharge(struct tcpc_dev *dev, bool enable) } static int tcpci_set_auto_vbus_discharge_threshold(struct tcpc_dev *dev, enum typec_pwr_opmode mode, - bool pps_active, u32 requested_vbus_voltage_mv) + bool pps_active, u32 requested_vbus_voltage_mv, + u32 apdo_min_voltage_mv) { struct tcpci *tcpci = tcpc_to_tcpci(dev); unsigned int pwr_ctrl, threshold = 0; @@ -388,9 +390,12 @@ static int tcpci_set_auto_vbus_discharge_threshold(struct tcpc_dev *dev, enum ty threshold = AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV; } else if (mode == TYPEC_PWR_MODE_PD) { if (pps_active) - threshold = ((VPPS_NEW_MIN_PERCENT * requested_vbus_voltage_mv / 100) - - VSINKPD_MIN_IR_DROP_MV - VPPS_VALID_MIN_MV) * - VSINKDISCONNECT_PD_MIN_PERCENT / 100; + /* + * To prevent disconnect when the source is in Current Limit Mode. + * Set the threshold to the lowest possible voltage vPpsShutdown (min) + */ + threshold = VPPS_SHUTDOWN_MIN_PERCENT * apdo_min_voltage_mv / 100 - + VSINKPD_MIN_IR_DROP_MV; else threshold = ((VSRC_NEW_MIN_PERCENT * requested_vbus_voltage_mv / 100) - VSINKPD_MIN_IR_DROP_MV - VSRC_VALID_MIN_MV) * diff --git a/drivers/usb/typec/tcpm/tcpci_mt6370.c b/drivers/usb/typec/tcpm/tcpci_mt6370.c index 1479f96..ed822f4 100644 --- a/drivers/usb/typec/tcpm/tcpci_mt6370.c +++ b/drivers/usb/typec/tcpm/tcpci_mt6370.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 95c0c63..47be450 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -185,7 +186,8 @@ S(UNSTRUCTURED_VDMS), \ S(STRUCTURED_VDMS), \ S(COUNTRY_INFO), \ - S(COUNTRY_CODES) + S(COUNTRY_CODES), \ + S(REVISION_INFORMATION) #define GENERATE_ENUM(e) e #define GENERATE_STRING(s) #s @@ -225,6 +227,7 @@ enum pd_msg_request { PD_MSG_CTRL_NOT_SUPP, PD_MSG_DATA_SINK_CAP, PD_MSG_DATA_SOURCE_CAP, + PD_MSG_DATA_REV, }; enum adev_actions { @@ -310,6 +313,13 @@ struct pd_data { unsigned int operating_snk_mw; }; +struct pd_revision_info { + u8 rev_major; + u8 rev_minor; + u8 ver_major; + u8 ver_minor; +}; + /* * @sink_wait_cap_time: Deadline (in ms) for tTypeCSinkWaitCap timer * @ps_src_wait_off_time: Deadline (in ms) for tPSSourceOff timer @@ -567,6 +577,9 @@ struct tcpm_port { /* Timer deadline values configured at runtime */ struct pd_timings timings; + + /* Indicates maximum (revision, version) supported */ + struct pd_revision_info pd_rev; #ifdef CONFIG_DEBUG_FS struct dentry *dentry; struct mutex logbuffer_lock; /* log buffer access lock */ @@ -880,8 +893,8 @@ static int tcpm_enable_auto_vbus_discharge(struct tcpm_port *port, bool enable) if (port->tcpc->enable_auto_vbus_discharge) { ret = port->tcpc->enable_auto_vbus_discharge(port->tcpc, enable); - tcpm_log_force(port, "%s vbus discharge ret:%d", enable ? "enable" : "disable", - ret); + tcpm_log_force(port, "%s vbus discharge ret:%d", + str_enable_disable(enable), ret); if (!ret) port->auto_vbus_discharge_enabled = enable; } @@ -1234,6 +1247,24 @@ static u32 tcpm_forge_legacy_pdo(struct tcpm_port *port, u32 pdo, enum typec_rol } } +static int tcpm_pd_send_revision(struct tcpm_port *port) +{ + struct pd_message msg; + u32 rmdo; + + memset(&msg, 0, sizeof(msg)); + rmdo = RMDO(port->pd_rev.rev_major, port->pd_rev.rev_minor, + port->pd_rev.ver_major, port->pd_rev.ver_minor); + msg.payload[0] = cpu_to_le32(rmdo); + msg.header = PD_HEADER_LE(PD_DATA_REVISION, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, + 1); + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + static int tcpm_pd_send_source_caps(struct tcpm_port *port) { struct pd_message msg; @@ -2943,10 +2974,12 @@ static int tcpm_set_auto_vbus_discharge_threshold(struct tcpm_port *port, return 0; ret = port->tcpc->set_auto_vbus_discharge_threshold(port->tcpc, mode, pps_active, - requested_vbus_voltage); + requested_vbus_voltage, + port->pps_data.min_volt); tcpm_log_force(port, - "set_auto_vbus_discharge_threshold mode:%d pps_active:%c vbus:%u ret:%d", - mode, pps_active ? 'y' : 'n', requested_vbus_voltage, ret); + "set_auto_vbus_discharge_threshold mode:%d pps_active:%c vbus:%u pps_apdo_min_volt:%u ret:%d", + mode, pps_active ? 'y' : 'n', requested_vbus_voltage, + port->pps_data.min_volt, ret); return ret; } @@ -3537,6 +3570,17 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS); break; + case PD_CTRL_GET_REVISION: + if (port->negotiated_rev >= PD_REV30 && port->pd_rev.rev_major) + tcpm_pd_handle_msg(port, PD_MSG_DATA_REV, + REVISION_INFORMATION); + else + tcpm_pd_handle_msg(port, + port->negotiated_rev < PD_REV30 ? + PD_MSG_CTRL_REJECT : + PD_MSG_CTRL_NOT_SUPP, + NONE_AMS); + break; default: tcpm_pd_handle_msg(port, port->negotiated_rev < PD_REV30 ? @@ -3781,6 +3825,14 @@ static bool tcpm_send_queued_message(struct tcpm_port *port) tcpm_ams_finish(port); } break; + case PD_MSG_DATA_REV: + ret = tcpm_pd_send_revision(port); + if (ret) + tcpm_log(port, + "Unable to send revision msg, ret=%d", + ret); + tcpm_ams_finish(port); + break; default: break; } @@ -4390,7 +4442,7 @@ static void tcpm_unregister_altmodes(struct tcpm_port *port) static void tcpm_set_partner_usb_comm_capable(struct tcpm_port *port, bool capable) { - tcpm_log(port, "Setting usb_comm capable %s", capable ? "true" : "false"); + tcpm_log(port, "Setting usb_comm capable %s", str_true_false(capable)); if (port->tcpc->set_partner_usb_comm_capable) port->tcpc->set_partner_usb_comm_capable(port->tcpc, capable); @@ -4772,7 +4824,7 @@ static void run_state_machine(struct tcpm_port *port) port->caps_count = 0; port->pd_capable = true; tcpm_set_state_cond(port, SRC_SEND_CAPABILITIES_TIMEOUT, - PD_T_SEND_SOURCE_CAP); + PD_T_SENDER_RESPONSE); } break; case SRC_SEND_CAPABILITIES_TIMEOUT: @@ -7036,7 +7088,9 @@ static void tcpm_port_unregister_pd(struct tcpm_port *port) static int tcpm_port_register_pd(struct tcpm_port *port) { - struct usb_power_delivery_desc desc = { port->typec_caps.pd_revision }; + u16 pd_revision = port->typec_caps.pd_revision; + u16 pd_version = port->pd_rev.ver_major << 8 | port->pd_rev.ver_minor; + struct usb_power_delivery_desc desc = { pd_revision, pd_version }; struct usb_power_delivery_capabilities *cap; int ret, i; @@ -7331,6 +7385,29 @@ static int tcpm_fw_get_snk_vdos(struct tcpm_port *port, struct fwnode_handle *fw return 0; } +static void tcpm_fw_get_pd_revision(struct tcpm_port *port, struct fwnode_handle *fwnode) +{ + int ret; + u8 val[4]; + + ret = fwnode_property_count_u8(fwnode, "pd-revision"); + if (!ret || ret != 4) { + tcpm_log(port, "Unable to find pd-revision property or incorrect array size"); + return; + } + + ret = fwnode_property_read_u8_array(fwnode, "pd-revision", val, 4); + if (ret) { + tcpm_log(port, "Failed to parse pd-revision, ret:(%d)", ret); + return; + } + + port->pd_rev.rev_major = val[0]; + port->pd_rev.rev_minor = val[1]; + port->pd_rev.ver_major = val[2]; + port->pd_rev.ver_minor = val[3]; +} + /* Power Supply access to expose source power information */ enum tcpm_psy_online_states { TCPM_PSY_OFFLINE = 0, @@ -7669,11 +7746,18 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) goto out_destroy_wq; tcpm_fw_get_timings(port, tcpc->fwnode); + tcpm_fw_get_pd_revision(port, tcpc->fwnode); port->try_role = port->typec_caps.prefer_role; port->typec_caps.revision = 0x0120; /* Type-C spec release 1.2 */ - port->typec_caps.pd_revision = 0x0300; /* USB-PD spec release 3.0 */ + + if (port->pd_rev.rev_major) + port->typec_caps.pd_revision = port->pd_rev.rev_major << 8 | + port->pd_rev.rev_minor; + else + port->typec_caps.pd_revision = 0x0300; /* USB-PD spec release 3.0 */ + port->typec_caps.svdm_version = SVDM_VER_2_0; port->typec_caps.driver_data = port; port->typec_caps.ops = &tcpm_ops; diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig index 680e1b8..7555960 100644 --- a/drivers/usb/typec/ucsi/Kconfig +++ b/drivers/usb/typec/ucsi/Kconfig @@ -69,6 +69,19 @@ config UCSI_PMIC_GLINK To compile the driver as a module, choose M here: the module will be called ucsi_glink. +config CROS_EC_UCSI + tristate "UCSI Driver for ChromeOS EC" + depends on MFD_CROS_EC_DEV + depends on CROS_USBPD_NOTIFY + depends on !EXTCON_TCSS_CROS_EC + default MFD_CROS_EC_DEV + help + This driver enables UCSI support for a ChromeOS EC. The EC is + expected to implement a PPM. + + To compile the driver as a module, choose M here: the module + will be called cros_ec_ucsi. + config UCSI_LENOVO_YOGA_C630 tristate "UCSI Interface Driver for Lenovo Yoga C630" depends on EC_LENOVO_YOGA_C630 diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile index aed41d2..be98a87 100644 --- a/drivers/usb/typec/ucsi/Makefile +++ b/drivers/usb/typec/ucsi/Makefile @@ -21,4 +21,5 @@ obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o +obj-$(CONFIG_CROS_EC_UCSI) += cros_ec_ucsi.o obj-$(CONFIG_UCSI_LENOVO_YOGA_C630) += ucsi_yoga_c630.o diff --git a/drivers/usb/typec/ucsi/cros_ec_ucsi.c b/drivers/usb/typec/ucsi/cros_ec_ucsi.c new file mode 100644 index 0000000..c605c86 --- /dev/null +++ b/drivers/usb/typec/ucsi/cros_ec_ucsi.c @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * UCSI driver for ChromeOS EC + * + * Copyright 2024 Google LLC. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ucsi.h" + +/* + * Maximum size in bytes of a UCSI message between AP and EC + */ +#define MAX_EC_DATA_SIZE 256 + +/* + * Maximum time in milliseconds the cros_ec_ucsi driver + * will wait for a response to a command or and ack. + */ +#define WRITE_TMO_MS 5000 + +/* Number of times to attempt recovery from a write timeout before giving up. */ +#define WRITE_TMO_CTR_MAX 5 + +struct cros_ucsi_data { + struct device *dev; + struct ucsi *ucsi; + + struct cros_ec_device *ec; + struct notifier_block nb; + struct work_struct work; + struct delayed_work write_tmo; + int tmo_counter; + + struct completion complete; + unsigned long flags; +}; + +static int cros_ucsi_read(struct ucsi *ucsi, unsigned int offset, void *val, + size_t val_len) +{ + struct cros_ucsi_data *udata = ucsi_get_drvdata(ucsi); + struct ec_params_ucsi_ppm_get req = { + .offset = offset, + .size = val_len, + }; + int ret; + + if (val_len > MAX_EC_DATA_SIZE) { + dev_err(udata->dev, "Can't read %zu bytes. Too big.\n", val_len); + return -EINVAL; + } + + ret = cros_ec_cmd(udata->ec, 0, EC_CMD_UCSI_PPM_GET, + &req, sizeof(req), val, val_len); + if (ret < 0) { + dev_warn(udata->dev, "Failed to send EC message UCSI_PPM_GET: error=%d\n", ret); + return ret; + } + return 0; +} + +static int cros_ucsi_read_version(struct ucsi *ucsi, u16 *version) +{ + return cros_ucsi_read(ucsi, UCSI_VERSION, version, sizeof(*version)); +} + +static int cros_ucsi_read_cci(struct ucsi *ucsi, u32 *cci) +{ + return cros_ucsi_read(ucsi, UCSI_CCI, cci, sizeof(*cci)); +} + +static int cros_ucsi_read_message_in(struct ucsi *ucsi, void *val, + size_t val_len) +{ + return cros_ucsi_read(ucsi, UCSI_MESSAGE_IN, val, val_len); +} + +static int cros_ucsi_async_control(struct ucsi *ucsi, u64 cmd) +{ + struct cros_ucsi_data *udata = ucsi_get_drvdata(ucsi); + u8 ec_buf[sizeof(struct ec_params_ucsi_ppm_set) + sizeof(cmd)]; + struct ec_params_ucsi_ppm_set *req = (struct ec_params_ucsi_ppm_set *) ec_buf; + int ret; + + req->offset = UCSI_CONTROL; + memcpy(req->data, &cmd, sizeof(cmd)); + ret = cros_ec_cmd(udata->ec, 0, EC_CMD_UCSI_PPM_SET, + req, sizeof(ec_buf), NULL, 0); + if (ret < 0) { + dev_warn(udata->dev, "Failed to send EC message UCSI_PPM_SET: error=%d\n", ret); + return ret; + } + return 0; +} + +static int cros_ucsi_sync_control(struct ucsi *ucsi, u64 cmd) +{ + struct cros_ucsi_data *udata = ucsi_get_drvdata(ucsi); + int ret; + + ret = ucsi_sync_control_common(ucsi, cmd); + switch (ret) { + case -EBUSY: + /* EC may return -EBUSY if CCI.busy is set. + * Convert this to a timeout. + */ + case -ETIMEDOUT: + /* Schedule recovery attempt when we timeout + * or tried to send a command while still busy. + */ + cancel_delayed_work_sync(&udata->write_tmo); + schedule_delayed_work(&udata->write_tmo, + msecs_to_jiffies(WRITE_TMO_MS)); + break; + case 0: + /* Successful write. Cancel any pending recovery work. */ + cancel_delayed_work_sync(&udata->write_tmo); + break; + } + + return ret; +} + +static const struct ucsi_operations cros_ucsi_ops = { + .read_version = cros_ucsi_read_version, + .read_cci = cros_ucsi_read_cci, + .read_message_in = cros_ucsi_read_message_in, + .async_control = cros_ucsi_async_control, + .sync_control = cros_ucsi_sync_control, +}; + +static void cros_ucsi_work(struct work_struct *work) +{ + struct cros_ucsi_data *udata = container_of(work, struct cros_ucsi_data, work); + u32 cci; + + if (cros_ucsi_read_cci(udata->ucsi, &cci)) + return; + + ucsi_notify_common(udata->ucsi, cci); +} + +static void cros_ucsi_write_timeout(struct work_struct *work) +{ + struct cros_ucsi_data *udata = + container_of(work, struct cros_ucsi_data, write_tmo.work); + u32 cci; + u64 cmd; + + if (cros_ucsi_read(udata->ucsi, UCSI_CCI, &cci, sizeof(cci))) { + dev_err(udata->dev, + "Reading CCI failed; no write timeout recovery possible.\n"); + return; + } + + if (cci & UCSI_CCI_BUSY) { + udata->tmo_counter++; + + if (udata->tmo_counter <= WRITE_TMO_CTR_MAX) + schedule_delayed_work(&udata->write_tmo, + msecs_to_jiffies(WRITE_TMO_MS)); + else + dev_err(udata->dev, + "PPM unresponsive - too many write timeouts.\n"); + + return; + } + + /* No longer busy means we can reset our timeout counter. */ + udata->tmo_counter = 0; + + /* Need to ack previous command which may have timed out. */ + if (cci & UCSI_CCI_COMMAND_COMPLETE) { + cmd = UCSI_ACK_CC_CI | UCSI_ACK_COMMAND_COMPLETE; + cros_ucsi_async_control(udata->ucsi, cmd); + + /* Check again after a few seconds that the system has + * recovered to make sure our async write above was successful. + */ + schedule_delayed_work(&udata->write_tmo, + msecs_to_jiffies(WRITE_TMO_MS)); + return; + } + + /* We recovered from a previous timeout. Treat this as a recovery from + * suspend and call resume. + */ + ucsi_resume(udata->ucsi); +} + +static int cros_ucsi_event(struct notifier_block *nb, + unsigned long host_event, void *_notify) +{ + struct cros_ucsi_data *udata = container_of(nb, struct cros_ucsi_data, nb); + + if (!(host_event & PD_EVENT_PPM)) + return NOTIFY_OK; + + dev_dbg(udata->dev, "UCSI notification received\n"); + flush_work(&udata->work); + schedule_work(&udata->work); + + return NOTIFY_OK; +} + +static void cros_ucsi_destroy(struct cros_ucsi_data *udata) +{ + cros_usbpd_unregister_notify(&udata->nb); + cancel_delayed_work_sync(&udata->write_tmo); + cancel_work_sync(&udata->work); + ucsi_destroy(udata->ucsi); +} + +static int cros_ucsi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct cros_ec_dev *ec_data = dev_get_drvdata(dev->parent); + struct cros_ucsi_data *udata; + int ret; + + udata = devm_kzalloc(dev, sizeof(*udata), GFP_KERNEL); + if (!udata) + return -ENOMEM; + + udata->dev = dev; + + udata->ec = ec_data->ec_dev; + if (!udata->ec) + return dev_err_probe(dev, -ENODEV, "couldn't find parent EC device\n"); + + platform_set_drvdata(pdev, udata); + + INIT_WORK(&udata->work, cros_ucsi_work); + INIT_DELAYED_WORK(&udata->write_tmo, cros_ucsi_write_timeout); + init_completion(&udata->complete); + + udata->ucsi = ucsi_create(dev, &cros_ucsi_ops); + if (IS_ERR(udata->ucsi)) + return dev_err_probe(dev, PTR_ERR(udata->ucsi), "failed to allocate UCSI instance\n"); + + ucsi_set_drvdata(udata->ucsi, udata); + + udata->nb.notifier_call = cros_ucsi_event; + ret = cros_usbpd_register_notify(&udata->nb); + if (ret) { + dev_err_probe(dev, ret, "failed to register notifier\n"); + ucsi_destroy(udata->ucsi); + return ret; + } + + ret = ucsi_register(udata->ucsi); + if (ret) { + dev_err_probe(dev, ret, "failed to register UCSI\n"); + cros_ucsi_destroy(udata); + return ret; + } + + return 0; +} + +static void cros_ucsi_remove(struct platform_device *dev) +{ + struct cros_ucsi_data *udata = platform_get_drvdata(dev); + + ucsi_unregister(udata->ucsi); + cros_ucsi_destroy(udata); +} + +static int __maybe_unused cros_ucsi_suspend(struct device *dev) +{ + struct cros_ucsi_data *udata = dev_get_drvdata(dev); + + cancel_delayed_work_sync(&udata->write_tmo); + cancel_work_sync(&udata->work); + + return 0; +} + +static void __maybe_unused cros_ucsi_complete(struct device *dev) +{ + struct cros_ucsi_data *udata = dev_get_drvdata(dev); + + ucsi_resume(udata->ucsi); +} + +/* + * UCSI protocol is also used on ChromeOS platforms which reply on + * cros_ec_lpc.c driver for communication with embedded controller (EC). + * On such platforms communication with the EC is not available until + * the .complete() callback of the cros_ec_lpc driver is executed. + * For this reason we delay ucsi_resume() until the .complete() stage + * otherwise UCSI SET_NOTIFICATION_ENABLE command will fail and we won't + * receive any UCSI notifications from the EC where PPM is implemented. + */ +static const struct dev_pm_ops cros_ucsi_pm_ops = { +#ifdef CONFIG_PM_SLEEP + .suspend = cros_ucsi_suspend, + .complete = cros_ucsi_complete, +#endif +}; + +static const struct platform_device_id cros_ucsi_id[] = { + { KBUILD_MODNAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, cros_ucsi_id); + +static struct platform_driver cros_ucsi_driver = { + .driver = { + .name = KBUILD_MODNAME, + .pm = &cros_ucsi_pm_ops, + }, + .id_table = cros_ucsi_id, + .probe = cros_ucsi_probe, + .remove = cros_ucsi_remove, +}; + +module_platform_driver(cros_ucsi_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("UCSI driver for ChromeOS EC"); diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index 5ff369c..82735eb 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -30,6 +30,7 @@ struct dentry; #define UCSIv2_MESSAGE_OUT 272 /* UCSI versions */ +#define UCSI_VERSION_1_0 0x0100 #define UCSI_VERSION_1_1 0x0110 #define UCSI_VERSION_1_2 0x0120 #define UCSI_VERSION_2_0 0x0200 diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c index f3a5e24..4cae85c 100644 --- a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c +++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c @@ -71,7 +71,7 @@ static int yoga_c630_ucsi_async_control(struct ucsi *ucsi, u64 command) return yoga_c630_ec_ucsi_write(uec->ec, (u8*)&command); } -const struct ucsi_operations yoga_c630_ucsi_ops = { +static const struct ucsi_operations yoga_c630_ucsi_ops = { .read_version = yoga_c630_ucsi_read_version, .read_cci = yoga_c630_ucsi_read_cci, .read_message_in = yoga_c630_ucsi_read_message_in, diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 6338d81..9aa30ef 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -269,7 +269,7 @@ static int stub_recv_cmd_unlink(struct stub_device *sdev, return 0; } - usbip_dbg_stub_rx("seqnum %d is not pending\n", + usbip_dbg_stub_rx("seqnum %u is not pending\n", pdu->u.cmd_unlink.seqnum); /* diff --git a/drivers/usb/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c index b1c2f67..7eb2e07 100644 --- a/drivers/usb/usbip/stub_tx.c +++ b/drivers/usb/usbip/stub_tx.c @@ -201,7 +201,7 @@ static int stub_send_ret_submit(struct stub_device *sdev) /* 1. setup usbip_header */ setup_ret_submit_pdu(&pdu_header, urb); - usbip_dbg_stub_tx("setup txdata seqnum: %d\n", + usbip_dbg_stub_tx("setup txdata seqnum: %u\n", pdu_header.base.seqnum); if (priv->sgl) { diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index b03e502..e70fba9 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -11,6 +11,7 @@ #include #include #include +#include #include "usbip_common.h" #include "vhci.h" @@ -675,7 +676,7 @@ static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev) spin_lock_irqsave(&vdev->priv_lock, flags); - priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum); + priv->seqnum = (u32)atomic_inc_return(&vhci_hcd->seqnum); if (priv->seqnum == 0xffff) dev_info(&urb->dev->dev, "seqnum max\n"); @@ -1161,12 +1162,8 @@ static int vhci_setup(struct usb_hcd *hcd) hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; } - /* - * Support SG. - * sg_tablesize is an arbitrary value to alleviate memory pressure - * on the host. - */ - hcd->self.sg_tablesize = 32; + /* accept arbitrarily long scatter-gather lists */ + hcd->self.sg_tablesize = ~0; hcd->self.no_sg_constraint = 1; return 0; @@ -1453,7 +1450,7 @@ static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state) if (connected > 0) { dev_info(&pdev->dev, "We have %d active connection%s. Do not suspend.\n", - connected, (connected == 1 ? "" : "s")); + connected, str_plural(connected)); ret = -EBUSY; } else { dev_info(&pdev->dev, "suspend vhci_hcd"); diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c index 7f2d1c2..a75f4a8 100644 --- a/drivers/usb/usbip/vhci_rx.c +++ b/drivers/usb/usbip/vhci_rx.c @@ -66,7 +66,7 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, spin_unlock_irqrestore(&vdev->priv_lock, flags); if (!urb) { - pr_err("cannot find a urb of seqnum %u max seqnum %d\n", + pr_err("cannot find a urb of seqnum %u max seqnum %u\n", pdu->base.seqnum, atomic_read(&vhci_hcd->seqnum)); usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); @@ -162,10 +162,10 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, * already received the result of its submit result and gave * back the URB. */ - pr_info("the urb (seqnum %d) was already given back\n", + pr_info("the urb (seqnum %u) was already given back\n", pdu->base.seqnum); } else { - usbip_dbg_vhci_rx("now giveback urb %d\n", pdu->base.seqnum); + usbip_dbg_vhci_rx("now giveback urb %u\n", pdu->base.seqnum); /* If unlink is successful, status is -ECONNRESET */ urb->status = pdu->u.ret_unlink.status; diff --git a/drivers/usb/usbip/vudc_sysfs.c b/drivers/usb/usbip/vudc_sysfs.c index 907a43a..2aae3ed 100644 --- a/drivers/usb/usbip/vudc_sysfs.c +++ b/drivers/usb/usbip/vudc_sysfs.c @@ -67,7 +67,7 @@ out: * Exposes device descriptor from the gadget driver. */ static ssize_t dev_desc_read(struct file *file, struct kobject *kobj, - struct bin_attribute *attr, char *out, + const struct bin_attribute *attr, char *out, loff_t off, size_t count) { struct device *dev = kobj_to_dev(kobj); @@ -88,7 +88,7 @@ unlock: spin_unlock_irqrestore(&udc->lock, flags); return ret; } -static BIN_ATTR_RO(dev_desc, sizeof(struct usb_device_descriptor)); +static const BIN_ATTR_RO(dev_desc, sizeof(struct usb_device_descriptor)); static ssize_t usbip_sockfd_store(struct device *dev, struct device_attribute *attr, @@ -252,14 +252,14 @@ static struct attribute *dev_attrs[] = { NULL, }; -static struct bin_attribute *dev_bin_attrs[] = { +static const struct bin_attribute *const dev_bin_attrs[] = { &bin_attr_dev_desc, NULL, }; static const struct attribute_group vudc_attr_group = { .attrs = dev_attrs, - .bin_attrs = dev_bin_attrs, + .bin_attrs_new = dev_bin_attrs, }; const struct attribute_group *vudc_groups[] = { diff --git a/drivers/usb/usbip/vudc_tx.c b/drivers/usb/usbip/vudc_tx.c index 3ccb17c..30c11bf 100644 --- a/drivers/usb/usbip/vudc_tx.c +++ b/drivers/usb/usbip/vudc_tx.c @@ -107,7 +107,7 @@ static int v_send_ret_submit(struct vudc *udc, struct urbp *urb_p) /* 1. setup usbip_header */ setup_ret_submit_pdu(&pdu_header, urb_p); - usbip_dbg_stub_tx("setup txdata seqnum: %d\n", + usbip_dbg_stub_tx("setup txdata seqnum: %u\n", pdu_header.base.seqnum); usbip_header_correct_endian(&pdu_header, 1); diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index b3c4993..ecf290a 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -5044,8 +5044,11 @@ struct ec_response_pd_status { #define PD_EVENT_POWER_CHANGE BIT(1) #define PD_EVENT_IDENTITY_RECEIVED BIT(2) #define PD_EVENT_DATA_SWAP BIT(3) +#define PD_EVENT_TYPEC BIT(4) +#define PD_EVENT_PPM BIT(5) + struct ec_response_host_event_status { - uint32_t status; /* PD MCU host event status */ + uint32_t status; /* PD MCU host event status */ } __ec_align4; /* Set USB type-C port role and muxes */ @@ -6105,6 +6108,29 @@ struct ec_response_typec_vdm_response { #undef VDO_MAX_SIZE +/* + * UCSI OPM-PPM commands + * + * These commands are used for communication between OPM and PPM. + * Only UCSI3.0 is tested. + */ + +#define EC_CMD_UCSI_PPM_SET 0x0140 + +/* The data size is stored in the host command protocol header. */ +struct ec_params_ucsi_ppm_set { + uint16_t offset; + uint8_t data[]; +} __ec_align2; + +#define EC_CMD_UCSI_PPM_GET 0x0141 + +/* For 'GET' sub-commands, data will be returned as a raw payload. */ +struct ec_params_ucsi_ppm_get { + uint16_t offset; + uint8_t size; +} __ec_align2; + /*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ diff --git a/include/linux/pm.h b/include/linux/pm.h index e7f0260..08c37b8 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -570,7 +570,8 @@ const struct dev_pm_ops name = { \ { .event = PM_EVENT_AUTO_RESUME, }) #define PMSG_IS_AUTO(msg) (((msg).event & PM_EVENT_AUTO) != 0) - +#define PMSG_NO_WAKEUP(msg) (((msg).event & \ + (PM_EVENT_FREEZE | PM_EVENT_QUIESCE)) != 0) /* * Device run-time power management status. * diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index d50098f..3068c30 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -33,7 +33,9 @@ enum pd_ctrl_msg_type { PD_CTRL_FR_SWAP = 19, PD_CTRL_GET_PPS_STATUS = 20, PD_CTRL_GET_COUNTRY_CODES = 21, - /* 22-31 Reserved */ + /* 22-23 Reserved */ + PD_CTRL_GET_REVISION = 24, + /* 25-31 Reserved */ }; enum pd_data_msg_type { @@ -46,7 +48,9 @@ enum pd_data_msg_type { PD_DATA_ALERT = 6, PD_DATA_GET_COUNTRY_INFO = 7, PD_DATA_ENTER_USB = 8, - /* 9-14 Reserved */ + /* 9-11 Reserved */ + PD_DATA_REVISION = 12, + /* 13-14 Reserved */ PD_DATA_VENDOR_DEF = 15, /* 16-31 Reserved */ }; @@ -453,6 +457,20 @@ static inline unsigned int rdo_max_power(u32 rdo) #define EUDO_TBT_SUPPORT BIT(14) #define EUDO_HOST_PRESENT BIT(13) +/* + * Request Message Data Object (PD Revision 3.1+ only) + * -------- + * <31:28> :: Revision Major + * <27:24> :: Revision Minor + * <23:20> :: Version Major + * <19:16> :: Version Minor + * <15:0> :: Reserved, Shall be set to zero + */ + +#define RMDO(rev_maj, rev_min, ver_maj, ver_min) \ + (((rev_maj) & 0xf) << 28 | ((rev_min) & 0xf) << 24 | \ + ((ver_maj) & 0xf) << 20 | ((ver_min) & 0xf) << 16) + /* USB PD timers and counters */ #define PD_T_NO_RESPONSE 5000 /* 4.5 - 5.5 seconds */ #define PD_T_DB_DETECT 10000 /* 10 - 15 seconds */ diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index e4de6bc..0fa9885 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -223,7 +223,6 @@ extern struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, extern struct usb_phy *devm_usb_get_phy_by_node(struct device *dev, struct device_node *node, struct notifier_block *nb); extern void usb_put_phy(struct usb_phy *); -extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); extern void usb_phy_set_event(struct usb_phy *x, unsigned long event); extern void usb_phy_set_charger_current(struct usb_phy *usb_phy, unsigned int mA); @@ -259,10 +258,6 @@ static inline void usb_put_phy(struct usb_phy *x) { } -static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) -{ -} - static inline void usb_phy_set_event(struct usb_phy *x, unsigned long event) { } diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h index 8539956..51be3bb 100644 --- a/include/linux/usb/storage.h +++ b/include/linux/usb/storage.h @@ -82,4 +82,12 @@ struct bulk_cs_wrap { #define US_BULK_RESET_REQUEST 0xff #define US_BULK_GET_MAX_LUN 0xfe +/* + * If 4 LUNs are supported then the LUNs would be + * numbered from 0 to 3, and the return value for + * US_BULK_GET_MAX_LUN request would be 3. The valid + * LUN field is 4 bits wide, the upper limit is 0x0f. + */ +#define US_BULK_MAX_LUN_LIMIT 0x0f + #endif diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h index 061da95..b22e659 100644 --- a/include/linux/usb/tcpm.h +++ b/include/linux/usb/tcpm.h @@ -163,7 +163,8 @@ struct tcpc_dev { void (*frs_sourcing_vbus)(struct tcpc_dev *dev); int (*enable_auto_vbus_discharge)(struct tcpc_dev *dev, bool enable); int (*set_auto_vbus_discharge_threshold)(struct tcpc_dev *dev, enum typec_pwr_opmode mode, - bool pps_active, u32 requested_vbus_voltage); + bool pps_active, u32 requested_vbus_voltage, + u32 pps_apdo_min_voltage); bool (*is_vbus_vsafe0v)(struct tcpc_dev *dev); void (*set_partner_usb_comm_capable)(struct tcpc_dev *dev, bool enable); void (*check_contaminant)(struct tcpc_dev *dev); diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index d616b88..252af3f 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -140,6 +140,7 @@ int typec_cable_set_identity(struct typec_cable *cable); * @mode: Index of the Mode * @vdo: VDO returned by Discover Modes USB PD command * @roles: Only for ports. DRP if the mode is available in both roles + * @inactive: Only for ports. Make this port inactive (default is active). * * Description of an Alternate Mode which a connector, cable plug or partner * supports. @@ -150,6 +151,7 @@ struct typec_altmode_desc { u32 vdo; /* Only used with ports */ enum typec_port_data roles; + bool inactive; }; void typec_partner_set_pd_revision(struct typec_partner *partner, u16 pd_revision); diff --git a/include/linux/usb/typec_tbt.h b/include/linux/usb/typec_tbt.h index fa97d7e..55dcea1 100644 --- a/include/linux/usb/typec_tbt.h +++ b/include/linux/usb/typec_tbt.h @@ -44,6 +44,7 @@ struct typec_thunderbolt_data { #define TBT_GEN3_NON_ROUNDED 0 #define TBT_GEN3_GEN4_ROUNDED_NON_ROUNDED 1 +#define TBT_CABLE_ROUNDED BIT(19) #define TBT_CABLE_OPTICAL BIT(21) #define TBT_CABLE_RETIMER BIT(22) #define TBT_CABLE_LINK_TRAINING BIT(23) diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h index 2ebdba1..beef175 100644 --- a/include/uapi/linux/usb/functionfs.h +++ b/include/uapi/linux/usb/functionfs.h @@ -206,7 +206,7 @@ struct usb_ffs_dmabuf_transfer_req { * +-----+-----------------+------+--------------------------+ * | off | name | type | description | * +-----+-----------------+------+--------------------------+ - * | 0 | inteface | U8 | related interface number | + * | 0 | interface | U8 | related interface number | * +-----+-----------------+------+--------------------------+ * | 1 | dwLength | U32 | length of the descriptor | * +-----+-----------------+------+--------------------------+ @@ -224,7 +224,7 @@ struct usb_ffs_dmabuf_transfer_req { * +-----+-----------------+------+--------------------------+ * | off | name | type | description | * +-----+-----------------+------+--------------------------+ - * | 0 | inteface | U8 | related interface number | + * | 0 | interface | U8 | related interface number | * +-----+-----------------+------+--------------------------+ * | 1 | dwLength | U32 | length of the descriptor | * +-----+-----------------+------+--------------------------+ @@ -237,7 +237,7 @@ struct usb_ffs_dmabuf_transfer_req { * | 11 | ExtProp[] | | list of ext. prop. d. | * +-----+-----------------+------+--------------------------+ * - * ExtCompat[] is an array of valid Extended Compatiblity descriptors + * ExtCompat[] is an array of valid Extended Compatibility descriptors * which have the following format: * * +-----+-----------------------+------+-------------------------------------+ @@ -295,7 +295,7 @@ struct usb_functionfs_strings_head { * | 16 | stringtab | StringTab[lang_count] | table of strings per lang | * * For each language there is one stringtab entry (ie. there are lang_count - * stringtab entires). Each StringTab has following format: + * stringtab entries). Each StringTab has following format: * * | off | name | type | description | * |-----+---------+-------------------+------------------------------------| diff --git a/scripts/mod/devicetable-offsets.c b/scripts/mod/devicetable-offsets.c index 9c7b404..d3d00e8 100644 --- a/scripts/mod/devicetable-offsets.c +++ b/scripts/mod/devicetable-offsets.c @@ -237,7 +237,6 @@ int main(void) DEVID(typec_device_id); DEVID_FIELD(typec_device_id, svid); - DEVID_FIELD(typec_device_id, mode); DEVID(tee_client_device_id); DEVID_FIELD(tee_client_device_id, uuid); diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 19ec72a..0058611 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -1219,17 +1219,12 @@ static void do_tbsvc_entry(struct module *mod, void *symval) module_alias_printf(mod, true, "tbsvc:%s", alias); } -/* Looks like: typec:idNmN */ +/* Looks like: typec:idN */ static void do_typec_entry(struct module *mod, void *symval) { - char alias[256] = {}; - DEF_FIELD(symval, typec_device_id, svid); - DEF_FIELD(symval, typec_device_id, mode); - - ADD(alias, "m", mode != TYPEC_ANY_MODE, mode); - module_alias_printf(mod, false, "typec:id%04X%s", svid, alias); + module_alias_printf(mod, false, "typec:id%04X", svid); } /* Looks like: tee:uuid */