Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Merge commit. Changes below are compared with the first parent: d0964c37.
Changes
43 files changed · +359 −299
Only the first 600 diff lines are shown. Download the complete patch.
drivers/ieee802154/fakehard.c
View filediff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c
index 96a2959..7c544f7 100644
--- a/drivers/ieee802154/fakehard.c
+++ b/drivers/ieee802154/fakehard.c
@@ -260,15 +260,12 @@ static int ieee802154_fake_close(struct net_device *dev)
static netdev_tx_t ieee802154_fake_xmit(struct sk_buff *skb,
struct net_device *dev)
{
- skb->iif = dev->ifindex;
- skb->dev = dev;
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
- dev->trans_start = jiffies;
-
/* FIXME: do hardware work here ... */
+ dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
drivers/net/Kconfig
View filediff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e19ca4b..b2f71f7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -975,7 +975,7 @@ config ENC28J60_WRITEVERIFY
config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
- depends on NET_ETHERNET && HAS_IOMEM
+ depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA
select MII
select PHYLIB
select CRC32
drivers/net/arm/ep93xx_eth.c
View filediff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 2be49c8..b25467a 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -628,15 +628,6 @@ static int ep93xx_open(struct net_device *dev)
if (ep93xx_alloc_buffers(ep))
return -ENOMEM;
- if (is_zero_ether_addr(dev->dev_addr)) {
- random_ether_addr(dev->dev_addr);
- printk(KERN_INFO "%s: generated random MAC address "
- "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name,
- dev->dev_addr[0], dev->dev_addr[1],
- dev->dev_addr[2], dev->dev_addr[3],
- dev->dev_addr[4], dev->dev_addr[5]);
- }
-
napi_enable(&ep->napi);
if (ep93xx_start_hw(dev)) {
@@ -877,6 +868,9 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
ep->mii.mdio_write = ep93xx_mdio_write;
ep->mdc_divisor = 40; /* Max HCLK 100 MHz, min MDIO clk 2.5 MHz. */
+ if (is_zero_ether_addr(dev->dev_addr))
+ random_ether_addr(dev->dev_addr);
+
err = register_netdev(dev);
if (err) {
dev_err(&pdev->dev, "Failed to register netdev\n");
drivers/net/au1000_eth.c
View filediff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index ce6f1ac..3f4b430 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1088,7 +1088,14 @@ static struct net_device * au1000_probe(int port_num)
return NULL;
}
- if ((err = register_netdev(dev)) != 0) {
+ dev->base_addr = base;
+ dev->irq = irq;
+ dev->netdev_ops = &au1000_netdev_ops;
+ SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
+ dev->watchdog_timeo = ETH_TX_TIMEOUT;
+
+ err = register_netdev(dev);
+ if (err != 0) {
printk(KERN_ERR "%s: Cannot register net device, error %d\n",
DRV_NAME, err);
free_netdev(dev);
@@ -1209,12 +1216,6 @@ static struct net_device * au1000_probe(int port_num)
aup->tx_db_inuse[i] = pDB;
}
- dev->base_addr = base;
- dev->irq = irq;
- dev->netdev_ops = &au1000_netdev_ops;
- SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
- dev->watchdog_timeo = ETH_TX_TIMEOUT;
-
/*
* The boot code uses the ethernet controller, so reset it to start
* fresh. au1000_init() expects that the device is in reset state.
drivers/net/b44.c
View filediff --git a/drivers/net/b44.c b/drivers/net/b44.c
index e046943..2a91323 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -912,9 +912,6 @@ static irqreturn_t b44_interrupt(int irq, void *dev_id)
bp->istat = istat;
__b44_disable_ints(bp);
__napi_schedule(&bp->napi);
- } else {
- printk(KERN_ERR PFX "%s: Error, poll already scheduled\n",
- dev->name);
}
irq_ack:
drivers/net/davinci_emac.c
View filediff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index db63803..e347831 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -164,16 +164,14 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
# define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7)
/* EMAC mac_control register */
-#define EMAC_MACCONTROL_TXPTYPE (0x200)
-#define EMAC_MACCONTROL_TXPACEEN (0x40)
-#define EMAC_MACCONTROL_MIIEN (0x20)
-#define EMAC_MACCONTROL_GIGABITEN (0x80)
-#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7)
-#define EMAC_MACCONTROL_FULLDUPLEXEN (0x1)
+#define EMAC_MACCONTROL_TXPTYPE BIT(9)
+#define EMAC_MACCONTROL_TXPACEEN BIT(6)
+#define EMAC_MACCONTROL_GMIIEN BIT(5)
+#define EMAC_MACCONTROL_GIGABITEN BIT(7)
+#define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0)
#define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15)
/* GIGABIT MODE related bits */
-#define EMAC_DM646X_MACCONTORL_GMIIEN BIT(5)
#define EMAC_DM646X_MACCONTORL_GIG BIT(7)
#define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17)
@@ -192,10 +190,10 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
#define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF)
/* MAC_IN_VECTOR (0x180) register bit fields */
-#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT (0x20000)
-#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT (0x10000)
-#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC (0x0100)
-#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC (0x01)
+#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17)
+#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16)
+#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8)
+#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0)
/** NOTE:: For DM646x the IN_VECTOR has changed */
#define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH)
@@ -203,7 +201,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
#define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26)
#define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27)
-
/* CPPI bit positions */
#define EMAC_CPPI_SOP_BIT BIT(31)
#define EMAC_CPPI_EOP_BIT BIT(30)
@@ -750,8 +747,7 @@ static void emac_update_phystatus(struct emac_priv *priv)
if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
mac_control = emac_read(EMAC_MACCONTROL);
- mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN |
- EMAC_DM646X_MACCONTORL_GIG |
+ mac_control |= (EMAC_DM646X_MACCONTORL_GIG |
EMAC_DM646X_MACCONTORL_GIGFORCE);
} else {
/* Clear the GIG bit and GIGFORCE bit */
@@ -2108,7 +2104,7 @@ static int emac_hw_enable(struct emac_priv *priv)
/* Enable MII */
val = emac_read(EMAC_MACCONTROL);
- val |= (EMAC_MACCONTROL_MIIEN);
+ val |= (EMAC_MACCONTROL_GMIIEN);
emac_write(EMAC_MACCONTROL, val);
/* Enable NAPI and interrupts */
drivers/net/e100.c
View filediff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 3c29a20..d269a68 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -157,6 +157,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
@@ -602,6 +603,7 @@ struct nic {
struct mem *mem;
dma_addr_t dma_addr;
+ struct pci_pool *cbs_pool;
dma_addr_t cbs_dma_addr;
u8 adaptive_ifs;
u8 tx_threshold;
@@ -1793,9 +1795,7 @@ static void e100_clean_cbs(struct nic *nic)
nic->cb_to_clean = nic->cb_to_clean->next;
nic->cbs_avail++;
}
- pci_free_consistent(nic->pdev,
- sizeof(struct cb) * nic->params.cbs.count,
- nic->cbs, nic->cbs_dma_addr);
+ pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr);
nic->cbs = NULL;
nic->cbs_avail = 0;
}
@@ -1813,8 +1813,8 @@ static int e100_alloc_cbs(struct nic *nic)
nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
nic->cbs_avail = 0;
- nic->cbs = pci_alloc_consistent(nic->pdev,
- sizeof(struct cb) * count, &nic->cbs_dma_addr);
+ nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL,
+ &nic->cbs_dma_addr);
if (!nic->cbs)
return -ENOMEM;
@@ -2841,7 +2841,11 @@ static int __devinit e100_probe(struct pci_dev *pdev,
DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
goto err_out_free;
}
-
+ nic->cbs_pool = pci_pool_create(netdev->name,
+ nic->pdev,
+ nic->params.cbs.count * sizeof(struct cb),
+ sizeof(u32),
+ 0);
DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n",
(unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
pdev->irq, netdev->dev_addr);
@@ -2871,6 +2875,7 @@ static void __devexit e100_remove(struct pci_dev *pdev)
unregister_netdev(netdev);
e100_free(nic);
pci_iounmap(pdev, nic->csr);
+ pci_pool_destroy(nic->cbs_pool);
free_netdev(netdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
drivers/net/e1000e/e1000.h
View filediff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 189dfa2..3e187b0 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -141,6 +141,8 @@ struct e1000_info;
#define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */
#define HV_TNCRS_LOWER PHY_REG(778, 30)
+#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */
+
/* BM PHY Copper Specific Status */
#define BM_CS_STATUS 17
#define BM_CS_STATUS_LINK_UP 0x0400
drivers/net/e1000e/ethtool.c
View filediff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 1bf4d2a..e82638e 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -327,10 +327,18 @@ static int e1000_set_pauseparam(struct net_device *netdev,
hw->fc.current_mode = hw->fc.requested_mode;
- retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
- hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ retval = hw->mac.ops.setup_link(hw);
+ /* implicit goto out */
+ } else {
+ retval = e1000e_force_mac_fc(hw);
+ if (retval)
+ goto out;
+ e1000e_set_fc_watermarks(hw);
+ }
}
+out:
clear_bit(__E1000_RESETTING, &adapter->state);
return retval;
}
drivers/net/e1000e/ich8lan.c
View filediff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 51ddb04..eff3f47 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1118,7 +1118,8 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
oem_reg |= HV_OEM_BITS_LPLU;
}
/* Restart auto-neg to activate the bits */
- oem_reg |= HV_OEM_BITS_RESTART_AN;
+ if (!e1000_check_reset_block(hw))
+ oem_reg |= HV_OEM_BITS_RESTART_AN;
ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg);
out:
@@ -3558,6 +3559,7 @@ struct e1000_info e1000_pch_info = {
| FLAG_HAS_AMT
| FLAG_HAS_FLASH
| FLAG_HAS_JUMBO_FRAMES
+ | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
| FLAG_APME_IN_WUC,
.pba = 26,
.max_hw_frame_size = 4096,
drivers/net/e1000e/netdev.c
View filediff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0687c6a..fad8f9e 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2769,25 +2769,38 @@ void e1000e_reset(struct e1000_adapter *adapter)
/*
* flow control settings
*
- * The high water mark must be low enough to fit two full frame
+ * The high water mark must be low enough to fit one full frame
* (or the size used for early receive) above it in the Rx FIFO.
* Set it to the lower of:
* - 90% of the Rx FIFO size, and
* - the full Rx FIFO size minus the early receive size (for parts
* with ERT support assuming ERT set to E1000_ERT_2048), or
- * - the full Rx FIFO size minus two full frames
+ * - the full Rx FIFO size minus one full frame
*/
- if ((adapter->flags & FLAG_HAS_ERT) &&
- (adapter->netdev->mtu > ETH_DATA_LEN))
- hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - (E1000_ERT_2048 << 3)));
- else
- hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - (2 * adapter->max_frame_size)));
+ if (hw->mac.type == e1000_pchlan) {
+ /*
+ * Workaround PCH LOM adapter hangs with certain network
+ * loads. If hangs persist, try disabling Tx flow control.
+ */
+ if (adapter->netdev->mtu > ETH_DATA_LEN) {
+ fc->high_water = 0x3500;
+ fc->low_water = 0x1500;
+ } else {
+ fc->high_water = 0x5000;
+ fc->low_water = 0x3000;
+ }
+ } else {
+ if ((adapter->flags & FLAG_HAS_ERT) &&
+ (adapter->netdev->mtu > ETH_DATA_LEN))
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - (E1000_ERT_2048 << 3)));
+ else
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - adapter->max_frame_size));
- fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
- fc->low_water = (fc->high_water - (2 * adapter->max_frame_size));
- fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */
+ fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+ fc->low_water = fc->high_water - 8;
+ }
if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
fc->pause_time = 0xFFFF;
@@ -2813,6 +2826,10 @@ void e1000e_reset(struct e1000_adapter *adapter)
if (mac->ops.init_hw(hw))
e_err("Hardware Error\n");
+ /* additional part of the flow-control workaround above */
+ if (hw->mac.type == e1000_pchlan)
+ ew32(FCRTV_PCH, 0x1000);
+
e1000_update_mng_vlan(adapter);
/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
@@ -3610,7 +3627,7 @@ static void e1000_watchdog_task(struct work_struct *work)
case SPEED_100:
txb2b = 0;
netdev->tx_queue_len = 100;
- /* maybe add some timeout factor ? */
+ adapter->tx_timeout_factor = 10;
break;
}
@@ -4288,8 +4305,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
msleep(1);
- /* e1000e_down has a dependency on max_frame_size */
+ /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
adapter->max_frame_size = max_frame;
+ e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
if (netif_running(netdev))
e1000e_down(adapter);
@@ -4319,9 +4338,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
+ ETH_FCS_LEN;
- e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
- netdev->mtu = new_mtu;
-
if (netif_running(netdev))
e1000e_up(adapter);
else
drivers/net/e1000e/phy.c
View filediff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 03175b3..85f955f 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -71,7 +71,6 @@ static const u16 e1000_igp_2_cable_length_table[] =
#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15)
#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
#define I82577_CTRL_REG 23
-#define I82577_CTRL_DOWNSHIFT_MASK (7 << 10)
/* 82577 specific PHY registers */
#define I82577_PHY_CTRL_2 18
@@ -660,15 +659,6 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data);
- if (ret_val)
- goto out;
-
- /* Set number of link attempts before downshift */
- ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data);
- if (ret_val)
- goto out;
- phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK;
- ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data);
out:
return ret_val;
@@ -2658,19 +2648,18 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
page = 0;
if (reg > MAX_PHY_MULTI_PAGE_REG) {
- if ((hw->phy.type != e1000_phy_82578) ||
- ((reg != I82578_ADDR_REG) &&
- (reg != I82578_ADDR_REG + 1))) {
- u32 phy_addr = hw->phy.addr;
+ u32 phy_addr = hw->phy.addr;
- hw->phy.addr = 1;
+ hw->phy.addr = 1;
- /* Page is shifted left, PHY expects (page x 32) */
- ret_val = e1000e_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (page << IGP_PAGE_SHIFT));
- hw->phy.addr = phy_addr;
- }
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (page << IGP_PAGE_SHIFT));
+ hw->phy.addr = phy_addr;
+
+ if (ret_val)
+ goto out;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2678,7 +2667,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
out:
/* Revert to MDIO fast mode, if applicable */
if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
- ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
if (!locked)
hw->phy.ops.release_phy(hw);
@@ -2784,19 +2773,18 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
}
if (reg > MAX_PHY_MULTI_PAGE_REG) {
- if ((hw->phy.type != e1000_phy_82578) ||
- ((reg != I82578_ADDR_REG) &&
- (reg != I82578_ADDR_REG + 1))) {
- u32 phy_addr = hw->phy.addr;
+ u32 phy_addr = hw->phy.addr;
- hw->phy.addr = 1;
+ hw->phy.addr = 1;
- /* Page is shifted left, PHY expects (page x 32) */
- ret_val = e1000e_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (page << IGP_PAGE_SHIFT));
- hw->phy.addr = phy_addr;
- }
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (page << IGP_PAGE_SHIFT));
+ hw->phy.addr = phy_addr;
+
+ if (ret_val)
+ goto out;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2805,7 +2793,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
out:
/* Revert to MDIO fast mode, if applicable */
if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
- ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
if (!locked)
hw->phy.ops.release_phy(hw);
drivers/net/ixgbe/ixgbe_main.c
View filediff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index a5036f7..a456578 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -240,11 +240,11 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter,
struct ixgbe_ring *tx_ring)
{
- int tc;
u32 txoff = IXGBE_TFCS_TXOFF;
#ifdef CONFIG_IXGBE_DCB
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ int tc;
int reg_idx = tx_ring->reg_idx;
int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
drivers/net/ks8851_mll.c
View filediff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index 0be14d7..c146304 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -568,6 +568,16 @@ static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len)
iowrite16(*wptr++, ks->hw_addr);
}
+static void ks_disable_int(struct ks_net *ks)
+{
+ ks_wrreg16(ks, KS_IER, 0x0000);
+} /* ks_disable_int */
+
+static void ks_enable_int(struct ks_net *ks)
+{
+ ks_wrreg16(ks, KS_IER, ks->rc_ier);
+} /* ks_enable_int */
+
/**
* ks_tx_fifo_space - return the available hardware buffer size.
* @ks: The chip information
@@ -681,6 +691,47 @@ static void ks_soft_reset(struct ks_net *ks, unsigned op)
}
+void ks_enable_qmu(struct ks_net *ks)
+{
+ u16 w;
+
+ w = ks_rdreg16(ks, KS_TXCR);
+ /* Enables QMU Transmit (TXCR). */
+ ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
+
+ /*
+ * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
+ * Enable
+ */
+
+ w = ks_rdreg16(ks, KS_RXQCR);
+ ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
+
+ /* Enables QMU Receive (RXCR1). */
+ w = ks_rdreg16(ks, KS_RXCR1);
+ ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
+ ks->enabled = true;
+} /* ks_enable_qmu */
+
+static void ks_disable_qmu(struct ks_net *ks)
+{
+ u16 w;
+
+ w = ks_rdreg16(ks, KS_TXCR);
+
+ /* Disables QMU Transmit (TXCR). */
+ w &= ~TXCR_TXE;
+ ks_wrreg16(ks, KS_TXCR, w);
+
+ /* Disables QMU Receive (RXCR1). */
+ w = ks_rdreg16(ks, KS_RXCR1);
+ w &= ~RXCR1_RXE ;
+ ks_wrreg16(ks, KS_RXCR1, w);
+
+ ks->enabled = false;
+
+} /* ks_disable_qmu */
+
/**
* ks_read_qmu - read 1 pkt data from the QMU.
* @ks: The chip information
@@ -752,7 +803,7 @@ static void ks_rcv(struct ks_net *ks, struct net_device *netdev)
(frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) {
skb_reserve(skb, 2);
/* read data block including CRC 4 bytes */
- ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4);
+ ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len);
skb_put(skb, frame_hdr->len);
skb->dev = netdev;
skb->protocol = eth_type_trans(skb, netdev);
This diff is incomplete. Download the complete patch.
drivers/net/macvlan.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/netxen/netxen_nic.h
View fileThis diff is incomplete. Download the complete patch.
drivers/net/netxen/netxen_nic_hdr.h
View fileThis diff is incomplete. Download the complete patch.
drivers/net/netxen/netxen_nic_hw.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/netxen/netxen_nic_init.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/netxen/netxen_nic_main.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/r8169.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/smc91x.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/smsc9420.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/stmmac/stmmac_main.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/stmmac/stmmac_timer.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/stmmac/stmmac_timer.h
View fileThis diff is incomplete. Download the complete patch.
drivers/net/usb/hso.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/veth.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/wan/cosa.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/wireless/ath/ath9k/main.c
View fileThis diff is incomplete. Download the complete patch.
include/net/sctp/structs.h
View fileThis diff is incomplete. Download the complete patch.
net/core/pktgen.c
View fileThis diff is incomplete. Download the complete patch.
net/ipv4/ip_fragment.c
View fileThis diff is incomplete. Download the complete patch.
net/mac80211/agg-tx.c
View fileThis diff is incomplete. Download the complete patch.
net/mac80211/ieee80211_i.h
View fileThis diff is incomplete. Download the complete patch.
net/mac80211/util.c
View fileThis diff is incomplete. Download the complete patch.
net/netfilter/nf_log.c
View fileThis diff is incomplete. Download the complete patch.
net/netfilter/xt_limit.c
View fileThis diff is incomplete. Download the complete patch.
net/netfilter/xt_osf.c
View fileThis diff is incomplete. Download the complete patch.
net/rfkill/core.c
View fileThis diff is incomplete. Download the complete patch.
net/sctp/outqueue.c
View fileThis diff is incomplete. Download the complete patch.
net/sctp/sm_sideeffect.c
View fileThis diff is incomplete. Download the complete patch.
net/sctp/transport.c
View fileThis diff is incomplete. Download the complete patch.