Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
Merge commit. Changes below are compared with the first parent: d5c67bac.
Changes
34 files changed · +208 −211
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/i386/IO-APIC.txt
View filediff --git a/Documentation/i386/IO-APIC.txt b/Documentation/i386/IO-APIC.txt
index 435e69e..f951666 100644
--- a/Documentation/i386/IO-APIC.txt
+++ b/Documentation/i386/IO-APIC.txt
@@ -1,12 +1,14 @@
Most (all) Intel-MP compliant SMP boards have the so-called 'IO-APIC',
-which is an enhanced interrupt controller, it enables us to route
-hardware interrupts to multiple CPUs, or to CPU groups.
+which is an enhanced interrupt controller. It enables us to route
+hardware interrupts to multiple CPUs, or to CPU groups. Without an
+IO-APIC, interrupts from hardware will be delivered only to the
+CPU which boots the operating system (usually CPU#0).
Linux supports all variants of compliant SMP boards, including ones with
-multiple IO-APICs. (multiple IO-APICs are used in high-end servers to
-distribute IRQ load further).
+multiple IO-APICs. Multiple IO-APICs are used in high-end servers to
+distribute IRQ load further.
-There are (a few) known breakages in certain older boards, which bugs are
+There are (a few) known breakages in certain older boards, such bugs are
usually worked around by the kernel. If your MP-compliant SMP board does
not boot Linux, then consult the linux-smp mailing list archives first.
@@ -28,18 +30,18 @@ If your box boots fine with enabled IO-APIC IRQs, then your
hell:~>
<----------------------------
-some interrupts are still listed as 'XT PIC', but this is not a problem,
+Some interrupts are still listed as 'XT PIC', but this is not a problem;
none of those IRQ sources is performance-critical.
-in the unlikely case that your board does not create a working mp-table,
+In the unlikely case that your board does not create a working mp-table,
you can use the pirq= boot parameter to 'hand-construct' IRQ entries. This
-is nontrivial though and cannot be automated. One sample /etc/lilo.conf
+is non-trivial though and cannot be automated. One sample /etc/lilo.conf
entry:
append="pirq=15,11,10"
-the actual numbers depend on your system, on your PCI cards and on their
+The actual numbers depend on your system, on your PCI cards and on their
PCI slot position. Usually PCI slots are 'daisy chained' before they are
connected to the PCI chipset IRQ routing facility (the incoming PIRQ1-4
lines):
@@ -54,7 +56,7 @@ lines):
PIRQ1 ----| |- `----| |- `----| |- `----| |--------| |
`-' `-' `-' `-' `-'
-every PCI card emits a PCI IRQ, which can be INTA,INTB,INTC,INTD:
+Every PCI card emits a PCI IRQ, which can be INTA, INTB, INTC or INTD:
,-.
INTD--| |
@@ -95,21 +97,21 @@ card (IRQ11) in Slot3, and have Slot1 empty:
[value '0' is a generic 'placeholder', reserved for empty (or non-IRQ emitting)
slots.]
-generally, it's always possible to find out the correct pirq= settings, just
+Generally, it's always possible to find out the correct pirq= settings, just
permute all IRQ numbers properly ... it will take some time though. An
'incorrect' pirq line will cause the booting process to hang, or a device
-won't function properly (if it's inserted as eg. a module).
+won't function properly (e.g. if it's inserted as a module).
-If you have 2 PCI buses, then you can use up to 8 pirq values. Although such
+If you have 2 PCI buses, then you can use up to 8 pirq values, although such
boards tend to have a good configuration.
Be prepared that it might happen that you need some strange pirq line:
append="pirq=0,0,0,0,0,0,9,11"
-use smart try-and-err techniques to find out the correct pirq line ...
+Use smart trial-and-error techniques to find out the correct pirq line ...
-good luck and mail to [email protected] or
+Good luck and mail to [email protected] or
[email protected] if you have any problems that are not covered
by this document.
Documentation/kernel-parameters.txt
View filediff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a4fc7fc..7278295 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1056,8 +1056,6 @@ and is between 256 and 4096 characters. It is defined in the file
[SCSI] Maximum number of LUNs received.
Should be between 1 and 16384.
- mca-pentium [BUGS=X86-32]
-
mcatest= [IA-64]
mce [X86-32] Machine Check Exception
arch/powerpc/Makefile
View filediff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 6845482..1c6ce35 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -176,7 +176,7 @@ define archhelp
@echo ' *_defconfig - Select default config from arch/$(ARCH)/configs'
endef
-install: vdso_install
+install:
$(Q)$(MAKE) $(build)=$(boot) install
vdso_install:
arch/x86/Kconfig.debug
View filediff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 864affc..702eb39 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -156,7 +156,7 @@ config IO_DELAY_TYPE_NONE
choice
prompt "IO delay type"
- default IO_DELAY_0XED
+ default IO_DELAY_0X80
config IO_DELAY_0X80
bool "port 0x80 based port-IO delay [recommended]"
arch/x86/Makefile
View filediff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 204af43..f1e739a 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -229,7 +229,7 @@ zdisk bzdisk: vmlinux
fdimage fdimage144 fdimage288 isoimage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
-install: vdso_install
+install:
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
PHONY += vdso_install
arch/x86/kernel/Makefile
View filediff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 76ec0f8..4eb5ce8 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -6,7 +6,15 @@ extra-y := head_$(BITS).o init_task.o vmlinux.lds
extra-$(CONFIG_X86_64) += head64.o
CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
-CFLAGS_vsyscall_64.o := $(PROFILING) -g0
+
+#
+# vsyscalls (which work on the user stack) should have
+# no stack-protector checks:
+#
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_vsyscall_64.o := $(PROFILING) -g0 $(nostackp)
+CFLAGS_hpet.o := $(nostackp)
+CFLAGS_tsc_64.o := $(nostackp)
obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
arch/x86/kernel/cpu/bugs.c
View filediff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 9b95edc..027e5c0 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -25,14 +25,6 @@ static int __init no_halt(char *s)
__setup("no-hlt", no_halt);
-static int __init mca_pentium(char *s)
-{
- mca_pentium_flag = 1;
- return 1;
-}
-
-__setup("mca-pentium", mca_pentium);
-
static int __init no_387(char *s)
{
boot_cpu_data.hard_math = 0;
arch/x86/kernel/efi.c
View filediff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 0c0eeb1..759e02b 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -54,7 +54,7 @@ EXPORT_SYMBOL(efi);
struct efi_memory_map memmap;
-struct efi efi_phys __initdata;
+static struct efi efi_phys __initdata;
static efi_system_table_t efi_systab __initdata;
static int __init setup_noefi(char *arg)
arch/x86/kernel/efi_32.c
View filediff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c
index cb91f98..5d23d85 100644
--- a/arch/x86/kernel/efi_32.c
+++ b/arch/x86/kernel/efi_32.c
@@ -28,6 +28,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include <asm/efi.h>
/*
* To make EFI call EFI runtime service in physical addressing mode we need
arch/x86/kernel/entry_32.S
View filediff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 824e21b..4b87c32 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -409,7 +409,7 @@ restore_nocheck_notrace:
RESTORE_REGS
addl $4, %esp # skip orig_eax/error_code
CFI_ADJUST_CFA_OFFSET -4
-ENTRY(irq_return)
+irq_return:
INTERRUPT_RETURN
.section .fixup,"ax"
iret_exc:
arch/x86/kernel/entry_64.S
View filediff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 6be39a3..2ad9a1b 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -583,7 +583,7 @@ retint_restore_args: /* return to kernel space */
restore_args:
RESTORE_ARGS 0,8,0
-ENTRY(irq_return)
+irq_return:
INTERRUPT_RETURN
.section __ex_table, "a"
arch/x86/kernel/head_32.S
View filediff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 74ef4a4..25eb985 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -612,7 +612,7 @@ ENTRY(swapper_pg_pmd)
ENTRY(swapper_pg_dir)
.fill 1024,4,0
#endif
-ENTRY(swapper_pg_fixmap)
+swapper_pg_fixmap:
.fill 1024,4,0
ENTRY(empty_zero_page)
.fill 4096,1,0
arch/x86/kernel/head_64.S
View filediff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 53e5820..eb41504 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -255,7 +255,7 @@ ENTRY(secondary_startup_64)
lretq
/* SMP bootup changes these two */
- __CPUINITDATA
+ __REFDATA
.align 8
ENTRY(initial_code)
.quad x86_64_start_kernel
arch/x86/kernel/i387.c
View filediff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 26719bd..763dfc4 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -39,7 +39,7 @@
#define HAVE_HWFP 1
#endif
-unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
+static unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
void mxcsr_feature_mask_init(void)
{
arch/x86/kernel/i8259_32.c
View filediff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c
index 2d25b77..fe63196 100644
--- a/arch/x86/kernel/i8259_32.c
+++ b/arch/x86/kernel/i8259_32.c
@@ -26,8 +26,6 @@
* present in the majority of PC/AT boxes.
* plus some generic x86 specific things if generic specifics makes
* any sense at all.
- * this file should become arch/i386/kernel/irq.c when the old irq.c
- * moves to arch independent land
*/
static int i8259A_auto_eoi;
@@ -362,23 +360,12 @@ void __init init_ISA_irqs (void)
#endif
init_8259A(0);
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
-
- if (i < 16) {
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- } else {
- /*
- * 'high' PCI IRQs filled in on demand
- */
- irq_desc[i].chip = &no_irq_chip;
- }
+ /*
+ * 16 old-style INTA-cycle interrupts:
+ */
+ for (i = 0; i < 16; i++) {
+ set_irq_chip_and_handler_name(i, &i8259A_chip,
+ handle_level_irq, "XT");
}
}
arch/x86/kernel/io_delay.c
View filediff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index bd49321..c706a30 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -13,7 +13,6 @@
#include <asm/io.h>
int io_delay_type __read_mostly = CONFIG_DEFAULT_IO_DELAY_TYPE;
-EXPORT_SYMBOL_GPL(io_delay_type);
static int __initdata io_delay_override;
arch/x86/kernel/kprobes.c
View filediff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index a99e764..34a5912 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -581,7 +581,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
* When a retprobed function returns, this code saves registers and
* calls trampoline_handler() runs, which calls the kretprobe's handler.
*/
-void __kprobes kretprobe_trampoline_holder(void)
+static void __used __kprobes kretprobe_trampoline_holder(void)
{
asm volatile (
".global kretprobe_trampoline\n"
@@ -673,7 +673,7 @@ void __kprobes kretprobe_trampoline_holder(void)
/*
* Called from kretprobe_trampoline
*/
-void * __kprobes trampoline_handler(struct pt_regs *regs)
+static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
{
struct kretprobe_instance *ri = NULL;
struct hlist_head *head, empty_rp;
arch/x86/kernel/nmi_32.c
View filediff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c
index edd4136..6a0aa70 100644
--- a/arch/x86/kernel/nmi_32.c
+++ b/arch/x86/kernel/nmi_32.c
@@ -46,9 +46,6 @@ static unsigned int nmi_hz = HZ;
static DEFINE_PER_CPU(short, wd_enabled);
-/* local prototypes */
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu);
-
static int endflag __initdata = 0;
#ifdef CONFIG_SMP
@@ -391,15 +388,6 @@ __kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
return rc;
}
-int do_nmi_callback(struct pt_regs * regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
- if (unknown_nmi_panic)
- return unknown_nmi_panic_callback(regs, cpu);
-#endif
- return 0;
-}
-
#ifdef CONFIG_SYSCTL
static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
@@ -453,6 +441,15 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
#endif
+int do_nmi_callback(struct pt_regs *regs, int cpu)
+{
+#ifdef CONFIG_SYSCTL
+ if (unknown_nmi_panic)
+ return unknown_nmi_panic_callback(regs, cpu);
+#endif
+ return 0;
+}
+
void __trigger_all_cpu_backtrace(void)
{
int i;
arch/x86/kernel/nmi_64.c
View filediff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c
index fb99484..9a4fde7 100644
--- a/arch/x86/kernel/nmi_64.c
+++ b/arch/x86/kernel/nmi_64.c
@@ -46,9 +46,6 @@ static unsigned int nmi_hz = HZ;
static DEFINE_PER_CPU(short, wd_enabled);
-/* local prototypes */
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu);
-
/* Run after command line and cpu_init init, but before all other checks */
void nmi_watchdog_default(void)
{
@@ -394,15 +391,6 @@ asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code)
nmi_exit();
}
-int do_nmi_callback(struct pt_regs * regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
- if (unknown_nmi_panic)
- return unknown_nmi_panic_callback(regs, cpu);
-#endif
- return 0;
-}
-
void stop_nmi(void)
{
acpi_nmi_disable();
@@ -464,6 +452,15 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
#endif
+int do_nmi_callback(struct pt_regs *regs, int cpu)
+{
+#ifdef CONFIG_SYSCTL
+ if (unknown_nmi_panic)
+ return unknown_nmi_panic_callback(regs, cpu);
+#endif
+ return 0;
+}
+
void __trigger_all_cpu_backtrace(void)
{
int i;
arch/x86/kernel/setup_32.c
View filediff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 691ab4c..a1d7071 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -164,7 +164,6 @@ unsigned long mmu_cr4_features = X86_CR4_PAE;
unsigned int machine_id;
unsigned int machine_submodel_id;
unsigned int BIOS_revision;
-unsigned int mca_pentium_flag;
/* Boot loader ID as an integer, for the benefit of proc_dointvec */
int bootloader_type;
arch/x86/kernel/setup_64.c
View filediff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index c0d8208..6fd804f 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -518,7 +518,7 @@ static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
}
#ifdef CONFIG_NUMA
-static int nearby_node(int apicid)
+static int __cpuinit nearby_node(int apicid)
{
int i, node;
@@ -791,7 +791,7 @@ static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
return 1;
}
-static void srat_detect_node(void)
+static void __cpuinit srat_detect_node(void)
{
#ifdef CONFIG_NUMA
unsigned node;
@@ -1046,7 +1046,7 @@ __setup("noclflush", setup_noclflush);
void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
{
if (c->x86_model_id[0])
- printk(KERN_INFO "%s", c->x86_model_id);
+ printk(KERN_CONT "%s", c->x86_model_id);
if (c->x86_mask || c->cpuid_level >= 0)
printk(KERN_CONT " stepping %02x\n", c->x86_mask);
arch/x86/kernel/topology.c
View filediff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index a40051b..0fcc95a 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -34,7 +34,7 @@
static DEFINE_PER_CPU(struct x86_cpu, cpu_devices);
#ifdef CONFIG_HOTPLUG_CPU
-int arch_register_cpu(int num)
+int __ref arch_register_cpu(int num)
{
/*
* CPU0 cannot be offlined due to several
arch/x86/kernel/vmlinux_32.lds.S
View filediff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index f1148ac..2ffa965 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -38,7 +38,7 @@ SECTIONS
/* read-only */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
- . = ALIGN(4096); /* not really needed, already page aligned */
+ . = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */
*(.text.page_aligned)
TEXT_TEXT
SCHED_TEXT
@@ -70,21 +70,21 @@ SECTIONS
RODATA
/* writeable */
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
DATA_DATA
CONSTRUCTORS
} :data
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
__nosave_begin = .;
*(.data.nosave)
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_end = .;
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
*(.data.page_aligned)
*(.data.idt)
@@ -108,7 +108,7 @@ SECTIONS
}
/* might get freed after init */
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
__smp_locks = .;
*(.smp_locks)
@@ -120,10 +120,10 @@ SECTIONS
* after boot. Always make sure that ALIGN() directive is present after
* the section which contains __smp_alt_end.
*/
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
/* will be freed after init */
- . = ALIGN(4096); /* Init code and data */
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
__init_begin = .;
_sinittext = .;
@@ -174,23 +174,23 @@ SECTIONS
EXIT_DATA
}
#if defined(CONFIG_BLK_DEV_INITRD)
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
#endif
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
__per_cpu_start = .;
*(.data.percpu)
*(.data.percpu.shared_aligned)
__per_cpu_end = .;
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
/* freed after init ends here */
-
+
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
__init_end = .;
__bss_start = .; /* BSS */
@@ -200,7 +200,7 @@ SECTIONS
__bss_stop = .;
_end = . ;
/* This is where the kernel creates the early boot page tables */
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
pg0 = . ;
}
arch/x86/kernel/vmlinux_64.lds.S
View filediff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index 0992b99..fab1322 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -37,7 +37,7 @@ SECTIONS
KPROBES_TEXT
*(.fixup)
*(.gnu.warning)
- _etext = .; /* End of text section */
+ _etext = .; /* End of text section */
} :text = 0x9090
This diff is incomplete. Download the complete patch.
arch/x86/lib/csum-wrappers_64.c
View fileThis diff is incomplete. Download the complete patch.
arch/x86/lib/io_64.c
View fileThis diff is incomplete. Download the complete patch.
arch/x86/mm/ioremap.c
View fileThis diff is incomplete. Download the complete patch.
arch/x86/mm/pageattr.c
View fileThis diff is incomplete. Download the complete patch.
arch/x86/mm/srat_64.c
View fileThis diff is incomplete. Download the complete patch.
arch/x86/pci/common.c
View fileThis diff is incomplete. Download the complete patch.
arch/x86/power/hibernate_asm_64.S
View fileThis diff is incomplete. Download the complete patch.
include/asm-x86/i387.h
View fileThis diff is incomplete. Download the complete patch.
include/asm-x86/pgtable_64.h
View fileThis diff is incomplete. Download the complete patch.
include/asm-x86/processor.h
View fileThis diff is incomplete. Download the complete patch.