diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 1bb3a3e..bd64c04 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -232,6 +232,19 @@ static const struct acpi_device_id ivsc_acpi_ids[] = {
 	{ "INTC10FA" }, /* NVL */
 };
 
+/*
+ * The subset of ivsc_acpi_ids[] which are IVSC, rather than CVS, devices. The
+ * CVS IDs are deliberately not listed here: new ones keep being added, whereas
+ * this list is complete.
+ */
+static const struct acpi_device_id ivsc_only_acpi_ids[] = {
+	{ "INTC1059" },
+	{ "INTC1095" },
+	{ "INTC100A" },
+	{ "INTC10CF" },
+	{ }
+};
+
 static struct acpi_device *ipu_bridge_get_ivsc_acpi_dev(struct acpi_device *adev)
 {
 	unsigned int i;
@@ -283,6 +296,17 @@ static struct device *ipu_bridge_get_ivsc_csi_dev(struct acpi_device *adev)
 		return csi_dev;
 	}
 
+	/*
+	 * The lookups below match on the ACPI companion alone. That is fine for
+	 * CVS, which binds a driver to that very device, but not for IVSC: there
+	 * the ACPI device also has a driverless platform device, which would be
+	 * returned instead of the mei-csi client. Return NULL for IVSC so that
+	 * the caller fails and the probe is retried once the IVSC device shows
+	 * up.
+	 */
+	if (!acpi_match_device_ids(adev, ivsc_only_acpi_ids))
+		return NULL;
+
 	/* Try to locate CVS device on the I2C bus */
 	csi_dev = bus_find_device_by_acpi_dev(&i2c_bus_type, adev);
 	if (csi_dev)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index a118a30..4054600 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -477,18 +477,23 @@ static int mt7921_load_clc(struct mt792x_dev *dev, const char *fw_name)
 
 	for (offset = 0; offset < len; offset += clc_len) {
 		if (len - offset < sizeof(*clc)) {
+			dev_err(mdev->dev, "Invalid CLC record\n");
 			ret = -EINVAL;
 			goto out;
 		}
 
 		clc = (const struct mt7921_clc *)(clc_base + offset);
 		clc_len = le32_to_cpu(clc->len);
-		if (clc_len < sizeof(*clc) || clc_len > len - offset ||
-		    clc->idx >= ARRAY_SIZE(phy->clc)) {
+		if (clc_len < sizeof(*clc) || clc_len > len - offset) {
+			dev_err(mdev->dev, "Invalid CLC record\n");
 			ret = -EINVAL;
 			goto out;
 		}
 
+		/* Newer firmware may add records this driver does not use yet */
+		if (clc->idx >= ARRAY_SIZE(phy->clc))
+			continue;
+
 		/* do not init buf again if chip reset triggered */
 		if (phy->clc[clc->idx])
 			continue;
diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_acpi_sar.c b/drivers/net/wireless/mediatek/mt76/mt792x_acpi_sar.c
index 946dd79..b468051 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_acpi_sar.c
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_acpi_sar.c
@@ -323,7 +323,8 @@ int mt792x_init_acpi_sar_power(struct mt792x_phy *phy, bool set_default)
 	const struct cfg80211_sar_capa *capa = phy->mt76->hw->wiphy->sar_capa;
 	int i;
 
-	if (!phy->acpisar || !((struct mt792x_acpi_sar *)phy->acpisar)->dyn)
+	if (!capa || !phy->acpisar ||
+	    !((struct mt792x_acpi_sar *)phy->acpisar)->dyn)
 		return 0;
 
 	/* When ACPI SAR enabled in HW, we should apply rules for .frp
