Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

d7017821 · Linus Torvalds <[email protected]> · 2026-02-11 10:53:39 -08:00

Pull gpio updates from Bartosz Golaszewski:
 "There are two new drivers and some changes to GPIO core but mostly
  just GPIO driver updates across a wide array of files, adding support
  for new models as well as various refactoring changes. Nothing
  controversial and everything has spent a good measure of time in
  linux-next.

  GPIOLIB core:
   - shrink the GPIO bus driver stub code
   - rework software node support for "undefined" software nodes
   - provide and use devm_fwnode_gpiod_get_optional()
   - only compile the OF quirk for MT2701 when needed

  New drivers:
   - add the GPIO driver for ROHM bd72720
   - add the gpio-line-mux driver providing 1-to-many mapping for a
     single real GPIO

  Driver changes:
   - refactor gpio-pca9570: use lock guard, add missing headers, use
     devres consistently
   - add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
     driver along with some prerequisite refactoring
   - use device_get_match_data() where applicable and save some lines
   - add support for more models to gpio-cadence
   - add the compatible property to reset-gpio and use it in shared GPIO
     management
   - drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
   - add support for a new variant to gpio-pca953x
   - extend build coverage with COMPILE_TEST for more drivers
   - constify configfs structures in gpio-sim and gpio-virtuser
   - add support for the K3 SoC to gpio-spacemit
   - implement the missing .get_direction() callback in gpio-max77620
   - add support for Tegra264 to gpio-tegra186
   - drop unneeded MODULE_ALIAS() from gpio-menz127

  DT bindings:
   - document support for the opencores GPIO controller in gpio-mmio
   - document new variants for gpio-pca953x

  Documentation:
   - extensively describe interrupt source detection for gpio-pca953x
     and add more models to the list of supported variants"

* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
  gpio: tegra186: Add support for Tegra264
  dt-bindings: gpio: Add Tegra264 support
  gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
  gpio: max77620: Implement .get_direction() callback
  gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
  dt-bindings: gpio: aspeed,sgpio: Support ast2700
  gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
  gpio: aspeed-sgpio: Create llops to handle hardware access
  gpio: aspeed-sgpio: Remove unused bank name field
  gpio: aspeed-sgpio: Change the macro to support deferred probe
  regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
  gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
  gpio: mmio: Add compatible for opencores GPIO
  dt-bindings: gpio-mmio: Correct opencores GPIO
  gpio: pca9570: use lock guards
  gpio: pca9570: Don't use "proxy" headers
  gpio: pca9570: Use devm_mutex_init() for mutex initialization
  MAINTAINERS: Add ROHM BD72720 PMIC
  power: supply: bd71828-power: Support ROHM BD72720
  power: supply: bd71828: Support wider register addresses
  ...

Commit: d70178215211a7c73ecabeb55eeb0f8ef002bcab
Parents: 893ace4d · af9b4a56

Merge commit. Changes below are compared with the first parent: 893ace4d.

Changes

51 files changed · +4170 −430

File	Status	Add	Del	Content
Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml	modified	+3	−1	View file
Documentation/devicetree/bindings/gpio/gpio-line-mux.yaml	added	+107	−0	View file
Documentation/devicetree/bindings/gpio/gpio-mmio.yaml	modified	+2	−1	View file
Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml	modified	+2	−0	View file
Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml	modified	+22	−0	View file
Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml	modified	+3	−1	View file
Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml	modified	+4	−3	View file
Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml	added	+339	−0	View file
Documentation/devicetree/bindings/power/supply/battery.yaml	modified	+32	−1	View file
Documentation/devicetree/bindings/regulator/rohm,bd72720-regulator.yaml	added	+148	−0	View file
Documentation/driver-api/gpio/pca953x.rst	modified	+87	−0	View file
MAINTAINERS	modified	+8	−0	View file
drivers/clk/Kconfig	modified	+2	−2	View file
drivers/clk/clk-bd718x7.c	modified	+8	−2	View file
drivers/gpio/Kconfig	modified	+21	−3	View file
drivers/gpio/Makefile	modified	+2	−0	View file
drivers/gpio/gpio-aggregator.c	modified	+4	−4	View file
drivers/gpio/gpio-aspeed-sgpio.c	modified	+224	−138	View file
drivers/gpio/gpio-aspeed.c	modified	+2	−5	View file
drivers/gpio/gpio-bd72720.c	added	+281	−0	View file
drivers/gpio/gpio-cadence.c	modified	+61	−15	View file
drivers/gpio/gpio-creg-snps.c	modified	+1	−3	View file
drivers/gpio/gpio-line-mux.c	added	+116	−0	View file
drivers/gpio/gpio-max77620.c	modified	+19	−0	View file
drivers/gpio/gpio-max77759.c	modified	+2	−8	View file
drivers/gpio/gpio-menz127.c	modified	+0	−1	View file
drivers/gpio/gpio-mmio.c	modified	+1	−0	View file
drivers/gpio/gpio-pca953x.c	modified	+6	−0	View file
drivers/gpio/gpio-pca9570.c	modified	+13	−6	View file
drivers/gpio/gpio-realtek-otto.c	modified	+2	−3	View file
drivers/gpio/gpio-sim.c	modified	+8	−8	View file
drivers/gpio/gpio-spacemit-k1.c	modified	+118	−50	View file
drivers/gpio/gpio-tegra186.c	modified	+88	−2	View file
drivers/gpio/gpio-virtuser.c	modified	+4	−4	View file
drivers/gpio/gpio-zynq.c	modified	+5	−7	View file
drivers/gpio/gpiolib-of.c	modified	+4	−0	View file
drivers/gpio/gpiolib-shared.c	modified	+1	−6	View file
drivers/gpio/gpiolib-swnode.c	modified	+4	−5	View file
drivers/gpio/gpiolib.c	modified	+12	−18	View file
drivers/mfd/Kconfig	modified	+10	−8	View file
drivers/mfd/rohm-bd71828.c	modified	+503	−52	View file
drivers/power/supply/bd71828-power.c	modified	+129	−31	View file
drivers/regulator/Kconfig	modified	+4	−4	View file
drivers/regulator/bd71815-regulator.c	modified	+6	−9	View file
drivers/regulator/bd71828-regulator.c	modified	+1004	−21	View file
drivers/rtc/Kconfig	modified	+2	−1	View file
drivers/rtc/rtc-bd70528.c	modified	+14	−7	View file
include/dt-bindings/gpio/nvidia,tegra264-gpio.h	added	+61	−0	View file
include/linux/gpio/consumer.h	modified	+36	−0	View file
include/linux/mfd/rohm-bd72720.h	added	+634	−0	View file
include/linux/mfd/rohm-generic.h	modified	+1	−0	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml

View file

diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
index 1046f03..974185e 100644
--- a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
@@ -10,7 +10,8 @@ maintainers:
   - Andrew Jeffery <[email protected]>
 
 description:
-  This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC,
+  This SGPIO controller is for ASPEED AST2400, AST2500, AST2600 and AST2700 SoC,
+  AST2700 have two sgpio master both with 256 pins,
   AST2600 have two sgpio master one with 128 pins another one with 80 pins,
   AST2500/AST2400 have one sgpio master with 80 pins. Each of the Serial
   GPIO pins can be programmed to support the following options
@@ -27,6 +28,7 @@ properties:
       - aspeed,ast2400-sgpio
       - aspeed,ast2500-sgpio
       - aspeed,ast2600-sgpiom
+      - aspeed,ast2700-sgpiom
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/gpio/gpio-line-mux.yaml

View file

diff --git a/Documentation/devicetree/bindings/gpio/gpio-line-mux.yaml b/Documentation/devicetree/bindings/gpio/gpio-line-mux.yaml
new file mode 100644
index 0000000..f49c052
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-line-mux.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-line-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO line mux
+
+maintainers:
+  - Jonas Jelonek <[email protected]>
+
+description: |
+  A GPIO controller to provide virtual GPIOs for a 1-to-many input-only mapping
+  backed by a single shared GPIO and a multiplexer. A simple illustrated
+  example is:
+
+            +----- A
+    IN     /
+    <-----o------- B
+        / |\
+        | | +----- C
+        | |  \
+        | |   +--- D
+        | |
+       M1 M0
+
+    MUX CONTROL
+
+     M1 M0   IN
+      0  0   A
+      0  1   B
+      1  0   C
+      1  1   D
+
+  This can be used in case a real GPIO is connected to multiple inputs and
+  controlled by a multiplexer, and another subsystem/driver does not work
+  directly with the multiplexer subsystem.
+
+properties:
+  compatible:
+    const: gpio-line-mux
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-mux-states:
+    description: Mux states corresponding to the virtual GPIOs.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  gpio-line-names: true
+
+  mux-controls:
+    maxItems: 1
+    description:
+      Phandle to the multiplexer to control access to the GPIOs.
+
+  ngpios: false
+
+  muxed-gpios:
+    maxItems: 1
+    description:
+      GPIO which is the '1' in 1-to-many and is shared by the virtual GPIOs
+      and controlled via the mux.
+
+required:
+  - compatible
+  - gpio-controller
+  - gpio-line-mux-states
+  - mux-controls
+  - muxed-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/mux/mux.h>
+
+    sfp_gpio_mux: mux-controller-1 {
+        compatible = "gpio-mux";
+        mux-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>,
+                    <&gpio0 1 GPIO_ACTIVE_HIGH>;
+        #mux-control-cells = <0>;
+        idle-state = <MUX_IDLE_AS_IS>;
+    };
+
+    sfp1_gpio: sfp-gpio-1 {
+        compatible = "gpio-line-mux";
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        mux-controls = <&sfp_gpio_mux>;
+        muxed-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+        gpio-line-mux-states = <0>, <1>, <3>;
+    };
+
+    sfp1: sfp-p1 {
+        compatible = "sff,sfp";
+
+        i2c-bus = <&sfp1_i2c>;
+        los-gpios = <&sfp1_gpio 0 GPIO_ACTIVE_HIGH>;
+        mod-def0-gpios = <&sfp1_gpio 1 GPIO_ACTIVE_LOW>;
+        tx-fault-gpios = <&sfp1_gpio 2 GPIO_ACTIVE_HIGH>;
+    };

Documentation/devicetree/bindings/gpio/gpio-mmio.yaml

View file

diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
index ee5d5d2..1b2d253 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
@@ -20,9 +20,10 @@ properties:
   compatible:
     enum:
       - brcm,bcm6345-gpio
+      - intel,ixp4xx-expansion-bus-mmio-gpio
       - ni,169445-nand-gpio
+      - opencores,gpio
       - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO controller
-      - intel,ixp4xx-expansion-bus-mmio-gpio
 
   big-endian: true
 

Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml

View file

diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
index 12134c7..4f955f8 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -74,6 +74,8 @@ properties:
               - ti,tca9538
               - ti,tca9539
               - ti,tca9554
+              - ti,tcal6408
+              - ti,tcal6416
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml

View file

diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
index 2bd620a..17748dd 100644
--- a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
@@ -86,6 +86,9 @@ properties:
       - nvidia,tegra234-gpio
       - nvidia,tegra234-gpio-aon
       - nvidia,tegra256-gpio
+      - nvidia,tegra264-gpio
+      - nvidia,tegra264-gpio-uphy
+      - nvidia,tegra264-gpio-aon
 
   reg-names:
     items:
@@ -110,6 +113,10 @@ properties:
       ports, in the order the HW manual describes them. The number of entries
       required varies depending on compatible value.
 
+  wakeup-parent:
+    description: Phandle to the parent interrupt controller used for wake-up. On
+      Tegra, this typically references the PMC interrupt controller.
+
   gpio-controller: true
 
   gpio-ranges:
@@ -157,6 +164,8 @@ allOf:
               - nvidia,tegra194-gpio
               - nvidia,tegra234-gpio
               - nvidia,tegra256-gpio
+              - nvidia,tegra264-gpio
+              - nvidia,tegra264-gpio-uphy
     then:
       properties:
         interrupts:
@@ -171,12 +180,25 @@ allOf:
               - nvidia,tegra186-gpio-aon
               - nvidia,tegra194-gpio-aon
               - nvidia,tegra234-gpio-aon
+              - nvidia,tegra264-gpio-aon
     then:
       properties:
         interrupts:
           minItems: 1
           maxItems: 4
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra264-gpio
+              - nvidia,tegra264-gpio-uphy
+              - nvidia,tegra264-gpio-aon
+    then:
+      required:
+        - wakeup-parent
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml

View file

diff --git a/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml b/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml
index 83e0b2d..24d22d9 100644
--- a/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml
@@ -19,7 +19,9 @@ properties:
     pattern: "^gpio@[0-9a-f]+$"
 
   compatible:
-    const: spacemit,k1-gpio
+    enum:
+      - spacemit,k1-gpio
+      - spacemit,k3-gpio
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml

View file

diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
index b7a3ef7..64cc405 100644
--- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -10,11 +10,12 @@ maintainers:
   - Matti Vaittinen <[email protected]>
 
 description: |
-  This module is part of the ROHM BD71828 MFD device. For more details
-  see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
+  This module is part of the ROHM BD71828 and BD72720 MFD device. For more
+  details see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+  and Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml
 
   The LED controller is represented as a sub-node of the PMIC node on the device
-  tree.
+  tree. This should be located under "leds" - node in PMIC node.
 
   The device has two LED outputs referred as GRNLED and AMBLED in data-sheet.
 

Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml

View file

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml
new file mode 100644
index 0000000..9f42097
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml
@@ -0,0 +1,339 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd72720-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD72720 Power Management Integrated Circuit
+
+maintainers:
+  - Matti Vaittinen <[email protected]>
+
+description:
+  BD72720 is a single-chip power management IC for battery-powered portable
+  devices. The BD72720 integrates 10 bucks and 11 LDOs, and a 3000 mA
+  switching charger. The IC also includes a Coulomb counter, a real-time
+  clock (RTC), GPIOs and a 32.768 kHz clock gate.
+
+# In addition to the properties found from the charger node, the ROHM BD72720
+# uses properties from a static battery node. Please see the:
+# Documentation/devicetree/bindings/power/supply/battery.yaml
+#
+# Following properties are used
+# when present:
+#
+# charge-full-design-microamp-hours: Battry capacity in mAh
+# voltage-max-design-microvolt:      Maximum voltage
+# voltage-min-design-microvolt:      Minimum voltage system is still operating.
+# degrade-cycle-microamp-hours:      Capacity lost due to aging at each full
+#                                    charge cycle.
+# ocv-capacity-celsius:              Array of OCV table temperatures. 1/table.
+# ocv-capacity-table-<N>:            Table of OCV voltage/SOC pairs. Corresponds
+#                                    N.th temperature in ocv-capacity-celsius
+#
+# volt-drop-thresh-microvolt: Threshold for starting the VDR correction
+# volt-drop-soc:                Table of capacity values matching the
+#                                    values in VDR tables.
+#
+# volt-drop-temperatures-millicelsius: Temperatures corresponding to the volage
+# drop values given in volt-drop-[0-9]-microvolt
+#
+# volt-drop-[0-9]-microvolt: VDR table for a temperature specified in
+# volt-drop-temperatures-millicelsius
+#
+# VDR tables are (usually) determined for a specific battery by ROHM.
+# The battery node would then be referred from the charger node:
+#
+# monitored-battery = <&battery>;
+
+properties:
+  compatible:
+    const: rohm,bd72720
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      The first cell is the pin number and the second cell is used to specify
+      flags. See the gpio binding document for more information.
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    const: bd71828-32k-out
+
+  rohm,clkout-open-drain:
+    description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1
+
+  rohm,charger-sense-resistor-micro-ohms:
+    minimum: 10000
+    maximum: 50000
+    description:
+      BD72720 has a SAR ADC for measuring charging currents. External sense
+      resistor (RSENSE in data sheet) should be used. If some other but
+      30 mOhm resistor is used the resistance value should be given here in
+      micro Ohms.
+
+  regulators:
+    $ref: /schemas/regulator/rohm,bd72720-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  leds:
+    $ref: /schemas/leds/rohm,bd71828-leds.yaml
+
+  rohm,pin-fault_b:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      BD72720 has an OTP option to use fault_b-pin for different
+      purposes. Set this property accordingly. OTP options are
+      OTP0 - bi-directional FAULT_B or READY indicator depending on a
+      'sub option'
+      OTP1 - GPO
+      OTP2 - Power sequencer output.
+    enum:
+      - faultb
+      - readyind
+      - gpo
+      - pwrseq
+
+patternProperties:
+  "^rohm,pin-dvs[0-1]$":
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      BD72720 has 4 different OTP options to determine the use of dvs<X>-pins.
+      OTP0 - regulator RUN state control.
+      OTP1 - GPI.
+      OTP2 - GPO.
+      OTP3 - Power sequencer output.
+      This property specifies the use of the pin.
+    enum:
+      - dvs-input
+      - gpi
+      - gpo
+      - pwrseq
+
+  "^rohm,pin-exten[0-1]$":
+    $ref: /schemas/types.yaml#/definitions/string
+    description: BD72720 has an OTP option to use exten0-pin for different
+      purposes. Set this property accordingly.
+      OTP0 - GPO
+      OTP1 - Power sequencer output.
+    enum:
+      - gpo
+      - pwrseq
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd72720";
+            reg = <0x4b>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            clocks = <&osc 0>;
+            #clock-cells = <0>;
+            clock-output-names = "bd71828-32k-out";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            rohm,pin-dvs0 = "gpi";
+            rohm,pin-dvs1 = "gpi";
+            rohm,pin-exten0 = "gpo";
+            rohm,pin-exten1 = "gpo";
+            rohm,pin-fault_b = "faultb";
+
+            rohm,charger-sense-resistor-micro-ohms = <10000>;
+
+            regulators {
+                buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <2000000>;
+                };
+                buck4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                buck5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                buck6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck7 {
+                    regulator-name = "buck7";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck8 {
+                    regulator-name = "buck8";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <1700000>;
+                    regulator-ramp-delay = <2500>;
+                    rohm,dvs-run-voltage = <1700000>;
+                    rohm,dvs-idle-voltage = <1>;
+                    rohm,dvs-suspend-voltage = <1>;
+                    rohm,dvs-lpsr-voltage = <0>;
+                    regulator-boot-on;
+                };
+                buck9 {
+                    regulator-name = "buck9";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <1700000>;
+                    regulator-ramp-delay = <2500>;
+                    rohm,dvs-run-voltage = <1700000>;
+                    rohm,dvs-idle-voltage = <1>;
+                    rohm,dvs-suspend-voltage = <1>;
+                    rohm,dvs-lpsr-voltage = <0>;
+                    regulator-boot-on;
+                };
+                buck10 {
+                    regulator-name = "buck10";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <1700000>;
+                    regulator-ramp-delay = <2500>;
+                    rohm,dvs-run-voltage = <1700000>;
+                    rohm,dvs-idle-voltage = <1>;
+                    rohm,dvs-suspend-voltage = <1>;
+                    rohm,dvs-lpsr-voltage = <0>;
+                    regulator-boot-on;
+                };
+                ldo1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo7 {
+                    regulator-name = "ldo7";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo8 {
+                    regulator-name = "ldo8";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <3300000>;
+                    rohm,dvs-suspend-voltage = <0>;
+                    rohm,dvs-lpsr-voltage = <1>;
+                    rohm,dvs-run-voltage = <750000>;
+                };
+                ldo9 {
+                    regulator-name = "ldo9";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <3300000>;
+                    rohm,dvs-suspend-voltage = <0>;
+                    rohm,dvs-lpsr-voltage = <1>;
+                    rohm,dvs-run-voltage = <750000>;
+                };
+                ldo10 {
+                    regulator-name = "ldo10";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <3300000>;
+                    rohm,dvs-suspend-voltage = <0>;
+                    rohm,dvs-lpsr-voltage = <1>;
+                    rohm,dvs-run-voltage = <750000>;
+                };
+                ldo11 {
+                    regulator-name = "ldo11";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <3300000>;
+                    rohm,dvs-suspend-voltage = <0>;
+                    rohm,dvs-lpsr-voltage = <1>;
+                    rohm,dvs-run-voltage = <750000>;
+                };
+            };
+
+            leds {
+                compatible = "rohm,bd71828-leds";
+
+                led-1 {
+                    rohm,led-compatible = "bd71828-grnled";
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+                led-2 {
+                    rohm,led-compatible = "bd71828-ambled";
+                    function = LED_FUNCTION_CHARGING;
+                    color = <LED_COLOR_ID_AMBER>;