Merge tag 'tty-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

d7261970 · Linus Torvalds <[email protected]> · 2019-07-11 15:38:21 -07:00

Pull tty / serial driver updates from Greg KH:
 "Here is the "large" TTY and Serial driver update for 5.3-rc1.

  It's in the negative number of lines overall as we removed an obsolete
  serial driver that was causing problems for some people who were
  trying to clean up some apis (the mpsc.c driver, which only worked for
  some pre-production hardware that no one has anymore.)

  Other than that, lots of tiny changes, cleaning up small things along
  with some platform-specific serial driver updates.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'tty-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (68 commits)
  tty: serial: fsl_lpuart: add imx8qxp support
  serial: imx: set_termios(): preserve RTS state
  serial: imx: set_termios(): clarify RTS/CTS bits calculation
  serial: imx: set_termios(): factor-out 'ucr2' initial value
  serial: sh-sci: Terminate TX DMA during buffer flushing
  serial: sh-sci: Fix TX DMA buffer flushing and workqueue races
  serial: mpsc: Remove obsolete MPSC driver
  serial: 8250: 8250_core: Fix missing unlock on error in serial8250_register_8250_port()
  serial: stm32: add RX and TX FIFO flush
  serial: stm32: add support of RX FIFO threshold
  serial: stm32: add support of TX FIFO threshold
  serial: stm32: update PIO transmission
  serial: stm32: add support of timeout interrupt for RX
  Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled"
  tty/serial/8250: use mctrl_gpio helpers
  serial: mctrl_gpio: Check if GPIO property exisits before requesting it
  serial: 8250: pericom_do_set_divisor can be static
  tty: serial_core: Set port active bit in uart_port_activate
  serial: 8250: Add MSR/MCR TIOCM conversion wrapper functions
  serial: 8250: factor out serial8250_{set,clear}_THRI() helpers
  ...

Commit: d72619706abc4aa7e540ea882dae883cee7cc3b3
Parents: e786741f · 35a4ed01

Merge commit. Changes below are compared with the first parent: e786741f.

Changes

34 files changed · +887 −2604

File	Status	Add	Del	Content
Documentation/admin-guide/devices.txt	modified	+2	−2	View file
Documentation/devicetree/bindings/serial/8250.txt	modified	+19	−0	View file
arch/ia64/hp/sim/simserial.c	modified	+0	−2	View file
drivers/ipack/devices/ipoctal.h	modified	+0	−1	View file
drivers/tty/serial/8250/8250.h	modified	+89	−1	View file
drivers/tty/serial/8250/8250_core.c	modified	+20	−0	View file
drivers/tty/serial/8250/8250_dma.c	modified	+3	−8	View file
drivers/tty/serial/8250/8250_mtk.c	modified	+44	−29	View file
drivers/tty/serial/8250/8250_of.c	modified	+6	−8	View file
drivers/tty/serial/8250/8250_omap.c	modified	+19	−24	View file
drivers/tty/serial/8250/8250_pci.c	modified	+79	−18	View file
drivers/tty/serial/8250/8250_pnp.c	modified	+2	−2	View file
drivers/tty/serial/8250/8250_port.c	modified	+17	−33	View file
drivers/tty/serial/8250/Kconfig	modified	+1	−0	View file
drivers/tty/serial/Kconfig	modified	+0	−14	View file
drivers/tty/serial/Makefile	modified	+0	−1	View file
drivers/tty/serial/amba-pl011.c	modified	+1	−1	View file
drivers/tty/serial/cpm_uart/cpm_uart_core.c	modified	+11	−8	View file
drivers/tty/serial/digicolor-usart.c	modified	+5	−1	View file
drivers/tty/serial/fsl_lpuart.c	modified	+89	−25	View file
drivers/tty/serial/imx.c	modified	+39	−43	View file
drivers/tty/serial/max310x.c	modified	+95	−62	View file
drivers/tty/serial/mpsc.c	deleted	+0	−2138	View before deletion
drivers/tty/serial/msm_serial.c	modified	+4	−0	View file
drivers/tty/serial/serial_core.c	modified	+6	−1	View file
drivers/tty/serial/serial_mctrl_gpio.c	modified	+14	−0	View file
drivers/tty/serial/sh-sci.c	modified	+24	−9	View file
drivers/tty/serial/stm32-usart.c	modified	+249	−99	View file
drivers/tty/serial/stm32-usart.h	modified	+23	−10	View file
drivers/tty/serial/xilinx_uartps.c	modified	+21	−16	View file
drivers/tty/tty_io.c	modified	+3	−1	View file
include/linux/mv643xx.h	modified	+0	−46	View file
include/linux/serial_8250.h	modified	+1	−0	View file
include/uapi/linux/serial_core.h	modified	+1	−1	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/admin-guide/devices.txt

View file

diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index 1649117..e56e006 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -2693,8 +2693,8 @@
 		 41 = /dev/ttySMX0		Motorola i.MX - port 0
 		 42 = /dev/ttySMX1		Motorola i.MX - port 1
 		 43 = /dev/ttySMX2		Motorola i.MX - port 2
-		 44 = /dev/ttyMM0		Marvell MPSC - port 0
-		 45 = /dev/ttyMM1		Marvell MPSC - port 1
+		 44 = /dev/ttyMM0		Marvell MPSC - port 0 (obsolete unused)
+		 45 = /dev/ttyMM1		Marvell MPSC - port 1 (obsolete unused)
 		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
 		    ...
 		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5

Documentation/devicetree/bindings/serial/8250.txt

View file

diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index 3cba12f..20d351f 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -53,6 +53,9 @@ Optional properties:
   programmable TX FIFO thresholds.
 - resets : phandle + reset specifier pairs
 - overrun-throttle-ms : how long to pause uart rx when input overrun is encountered.
+- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
+  line respectively. It will use specified GPIO instead of the peripheral
+  function pin for the UART feature. If unsure, don't specify this property.
 
 Note:
 * fsl,ns16550:
@@ -74,3 +77,19 @@ Example:
 		interrupts = <10>;
 		reg-shift = <2>;
 	};
+
+Example for OMAP UART using GPIO-based modem control signals:
+
+	uart4: serial@49042000 {
+		compatible = "ti,omap3-uart";
+		reg = <0x49042000 0x400>;
+		interrupts = <80>;
+		ti,hwmods = "uart4";
+		clock-frequency = <48000000>;
+		cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+		rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+		dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	};

arch/ia64/hp/sim/simserial.c

View file

diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 7aeb48a..1a338e5 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -324,8 +324,6 @@ static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 	return -ENOIOCTLCMD;
 }
 
-#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
 /*
  * This routine will shutdown a serial port; interrupts are disabled, and
  * DTR is dropped if the hangup on close termio flag is on.

drivers/ipack/devices/ipoctal.h

View file

diff --git a/drivers/ipack/devices/ipoctal.h b/drivers/ipack/devices/ipoctal.h
index 9205378..75f83ba 100644
--- a/drivers/ipack/devices/ipoctal.h
+++ b/drivers/ipack/devices/ipoctal.h
@@ -15,7 +15,6 @@
 #define NR_CHANNELS		8
 #define IPOCTAL_MAX_BOARDS	16
 #define MAX_DEVICES		(NR_CHANNELS * IPOCTAL_MAX_BOARDS)
-#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
 
 /**
  * struct ipoctal_stats -- Stats since last reset

drivers/tty/serial/8250/8250.h

View file

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index ebfb0bd..33ad9d6 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -11,6 +11,8 @@
 #include <linux/serial_reg.h>
 #include <linux/dmaengine.h>
 
+#include "../serial_mctrl_gpio.h"
+
 struct uart_8250_dma {
 	int (*tx_dma)(struct uart_8250_port *p);
 	int (*rx_dma)(struct uart_8250_port *p);
@@ -128,6 +130,24 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
 	up->dl_write(up, value);
 }
 
+static inline bool serial8250_set_THRI(struct uart_8250_port *up)
+{
+	if (up->ier & UART_IER_THRI)
+		return false;
+	up->ier |= UART_IER_THRI;
+	serial_out(up, UART_IER, up->ier);
+	return true;
+}
+
+static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
+{
+	if (!(up->ier & UART_IER_THRI))
+		return false;
+	up->ier &= ~UART_IER_THRI;
+	serial_out(up, UART_IER, up->ier);
+	return true;
+}
+
 struct uart_8250_port *serial8250_get_port(int line);
 
 void serial8250_rpm_get(struct uart_8250_port *p);
@@ -139,14 +159,82 @@ void serial8250_rpm_put_tx(struct uart_8250_port *p);
 int serial8250_em485_init(struct uart_8250_port *p);
 void serial8250_em485_destroy(struct uart_8250_port *p);
 
+/* MCR <-> TIOCM conversion */
+static inline int serial8250_TIOCM_to_MCR(int tiocm)
+{
+	int mcr = 0;
+
+	if (tiocm & TIOCM_RTS)
+		mcr |= UART_MCR_RTS;
+	if (tiocm & TIOCM_DTR)
+		mcr |= UART_MCR_DTR;
+	if (tiocm & TIOCM_OUT1)
+		mcr |= UART_MCR_OUT1;
+	if (tiocm & TIOCM_OUT2)
+		mcr |= UART_MCR_OUT2;
+	if (tiocm & TIOCM_LOOP)
+		mcr |= UART_MCR_LOOP;
+
+	return mcr;
+}
+
+static inline int serial8250_MCR_to_TIOCM(int mcr)
+{
+	int tiocm = 0;
+
+	if (mcr & UART_MCR_RTS)
+		tiocm |= TIOCM_RTS;
+	if (mcr & UART_MCR_DTR)
+		tiocm |= TIOCM_DTR;
+	if (mcr & UART_MCR_OUT1)
+		tiocm |= TIOCM_OUT1;
+	if (mcr & UART_MCR_OUT2)
+		tiocm |= TIOCM_OUT2;
+	if (mcr & UART_MCR_LOOP)
+		tiocm |= TIOCM_LOOP;
+
+	return tiocm;
+}
+
+/* MSR <-> TIOCM conversion */
+static inline int serial8250_MSR_to_TIOCM(int msr)
+{
+	int tiocm = 0;
+
+	if (msr & UART_MSR_DCD)
+		tiocm |= TIOCM_CAR;
+	if (msr & UART_MSR_RI)
+		tiocm |= TIOCM_RNG;
+	if (msr & UART_MSR_DSR)
+		tiocm |= TIOCM_DSR;
+	if (msr & UART_MSR_CTS)
+		tiocm |= TIOCM_CTS;
+
+	return tiocm;
+}
+
 static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
 {
 	serial_out(up, UART_MCR, value);
+
+	if (up->gpios)
+		mctrl_gpio_set(up->gpios, serial8250_MCR_to_TIOCM(value));
 }
 
 static inline int serial8250_in_MCR(struct uart_8250_port *up)
 {
-	return serial_in(up, UART_MCR);
+	int mctrl;
+
+	mctrl = serial_in(up, UART_MCR);
+
+	if (up->gpios) {
+		unsigned int mctrl_gpio = 0;
+
+		mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio);
+		mctrl |= serial8250_TIOCM_to_MCR(mctrl_gpio);
+	}
+
+	return mctrl;
 }
 
 #if defined(__alpha__) && !defined(CONFIG_PCI)

drivers/tty/serial/8250/8250_core.c

View file

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index e441221..df3bcc0 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -14,6 +14,7 @@
  *	      serial8250_register_8250_port() ports
  */
 
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/ioport.h>
@@ -982,6 +983,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 
 	uart = serial8250_find_match_or_unused(&up->port);
 	if (uart && uart->port.type != PORT_8250_CIR) {
+		struct mctrl_gpios *gpios;
+
 		if (uart->port.dev)
 			uart_remove_one_port(&serial8250_reg, &uart->port);
 
@@ -1016,6 +1019,22 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 		if (up->port.flags & UPF_FIXED_TYPE)
 			uart->port.type = up->port.type;
 
+		/*
+		 * Only call mctrl_gpio_init(), if the device has no ACPI
+		 * companion device
+		 */
+		if (!has_acpi_companion(uart->port.dev)) {
+			gpios = mctrl_gpio_init(&uart->port, 0);
+			if (IS_ERR(gpios)) {
+				if (PTR_ERR(gpios) != -ENOSYS) {
+					ret = PTR_ERR(gpios);
+					goto out_unlock;
+				}
+			} else {
+				uart->gpios = gpios;
+			}
+		}
+
 		serial8250_set_defaults(uart);
 
 		/* Possibly override default I/O functions.  */
@@ -1082,6 +1101,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 		}
 	}
 
+out_unlock:
 	mutex_unlock(&serial_mutex);
 
 	return ret;

drivers/tty/serial/8250/8250_dma.c

View file

diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index bfa1a85..890fa7d 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -34,10 +34,8 @@ static void __dma_tx_complete(void *param)
 		uart_write_wakeup(&p->port);
 
 	ret = serial8250_tx_dma(p);
-	if (ret) {
-		p->ier |= UART_IER_THRI;
-		serial_port_out(&p->port, UART_IER, p->ier);
-	}
+	if (ret)
+		serial8250_set_THRI(p);
 
 	spin_unlock_irqrestore(&p->port.lock, flags);
 }
@@ -100,10 +98,7 @@ int serial8250_tx_dma(struct uart_8250_port *p)
 	dma_async_issue_pending(dma->txchan);
 	if (dma->tx_err) {
 		dma->tx_err = 0;
-		if (p->ier & UART_IER_THRI) {
-			p->ier &= ~UART_IER_THRI;
-			serial_out(p, UART_IER, p->ier);
-		}
+		serial8250_clear_THRI(p);
 	}
 	return 0;
 err:

drivers/tty/serial/8250/8250_mtk.c

View file

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 417c7c8..b411ba4 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/serial_8250.h>
@@ -47,7 +48,6 @@
 #define MTK_UART_DMA_EN_RX	0x5
 
 #define MTK_UART_ESCAPE_CHAR	0x77	/* Escape char added under sw fc */
-#define MTK_UART_TX_SIZE	UART_XMIT_SIZE
 #define MTK_UART_RX_SIZE	0x8000
 #define MTK_UART_TX_TRIGGER	1
 #define MTK_UART_RX_TRIGGER	MTK_UART_RX_SIZE
@@ -70,6 +70,7 @@ struct mtk8250_data {
 #ifdef CONFIG_SERIAL_8250_DMA
 	enum dma_rx_status	rx_status;
 #endif
+	int			rx_wakeup_irq;
 };
 
 /* flow control mode */
@@ -89,28 +90,30 @@ static void mtk8250_dma_rx_complete(void *param)
 	struct mtk8250_data *data = up->port.private_data;
 	struct tty_port *tty_port = &up->port.state->port;
 	struct dma_tx_state state;
+	int copied, total, cnt;
 	unsigned char *ptr;
-	int copied;
 
-	dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
-				dma->rx_size, DMA_FROM_DEVICE);
+	if (data->rx_status == DMA_RX_SHUTDOWN)
+		return;
 
 	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
+	total = dma->rx_size - state.residue;
+	cnt = total;
 
-	if (data->rx_status == DMA_RX_SHUTDOWN)
-		return;
+	if ((data->rx_pos + cnt) > dma->rx_size)
+		cnt = dma->rx_size - data->rx_pos;
 
-	if ((data->rx_pos + state.residue) <= dma->rx_size) {
-		ptr = (unsigned char *)(data->rx_pos + dma->rx_buf);
-		copied = tty_insert_flip_string(tty_port, ptr, state.residue);
-	} else {
-		ptr = (unsigned char *)(data->rx_pos + dma->rx_buf);
-		copied = tty_insert_flip_string(tty_port, ptr,
-						dma->rx_size - data->rx_pos);
+	ptr = (unsigned char *)(data->rx_pos + dma->rx_buf);
+	copied = tty_insert_flip_string(tty_port, ptr, cnt);
+	data->rx_pos += cnt;
+
+	if (total > cnt) {
 		ptr = (unsigned char *)(dma->rx_buf);
-		copied += tty_insert_flip_string(tty_port, ptr,
-				data->rx_pos + state.residue - dma->rx_size);
+		cnt = total - cnt;
+		copied += tty_insert_flip_string(tty_port, ptr, cnt);
+		data->rx_pos = cnt;
 	}
+
 	up->port.icount.rx += copied;
 
 	tty_flip_buffer_push(tty_port);
@@ -121,9 +124,7 @@ static void mtk8250_dma_rx_complete(void *param)
 static void mtk8250_rx_dma(struct uart_8250_port *up)
 {
 	struct uart_8250_dma *dma = up->dma;
-	struct mtk8250_data *data = up->port.private_data;
 	struct dma_async_tx_descriptor	*desc;
-	struct dma_tx_state	 state;
 
 	desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
 					   dma->rx_size, DMA_DEV_TO_MEM,
@@ -138,12 +139,6 @@ static void mtk8250_rx_dma(struct uart_8250_port *up)
 
 	dma->rx_cookie = dmaengine_submit(desc);
 
-	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
-	data->rx_pos = state.residue;
-
-	dma_sync_single_for_device(dma->rxchan->device->dev, dma->rx_addr,
-				   dma->rx_size, DMA_FROM_DEVICE);
-
 	dma_async_issue_pending(dma->rxchan);
 }
 
@@ -156,13 +151,11 @@ static void mtk8250_dma_enable(struct uart_8250_port *up)
 	if (data->rx_status != DMA_RX_START)
 		return;
 
-	dma->rxconf.direction		= DMA_DEV_TO_MEM;
-	dma->rxconf.src_addr_width	= dma->rx_size / 1024;
-	dma->rxconf.src_addr		= dma->rx_addr;
+	dma->rxconf.src_port_window_size	= dma->rx_size;
+	dma->rxconf.src_addr				= dma->rx_addr;
 
-	dma->txconf.direction		= DMA_MEM_TO_DEV;
-	dma->txconf.dst_addr_width	= MTK_UART_TX_SIZE / 1024;
-	dma->txconf.dst_addr		= dma->tx_addr;
+	dma->txconf.dst_port_window_size	= UART_XMIT_SIZE;
+	dma->txconf.dst_addr				= dma->tx_addr;
 
 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
 		UART_FCR_CLEAR_XMIT);
@@ -551,6 +544,8 @@ static int mtk8250_probe(struct platform_device *pdev)
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
+	data->rx_wakeup_irq = platform_get_irq(pdev, 1);
+
 	return 0;
 }
 
@@ -572,15 +567,35 @@ static int mtk8250_remove(struct platform_device *pdev)
 static int __maybe_unused mtk8250_suspend(struct device *dev)
 {
 	struct mtk8250_data *data = dev_get_drvdata(dev);
+	int irq = data->rx_wakeup_irq;
+	int err;
 
 	serial8250_suspend_port(data->line);
 
+	pinctrl_pm_select_sleep_state(dev);
+	if (irq >= 0) {
+		err = enable_irq_wake(irq);
+		if (err) {
+			dev_err(dev,
+				"failed to enable irq wake on IRQ %d: %d\n",
+				irq, err);
+			pinctrl_pm_select_default_state(dev);
+			serial8250_resume_port(data->line);
+			return err;
+		}
+	}
+
 	return 0;
 }
 
 static int __maybe_unused mtk8250_resume(struct device *dev)
 {
 	struct mtk8250_data *data = dev_get_drvdata(dev);
+	int irq = data->rx_wakeup_irq;
+
+	if (irq >= 0)
+		disable_irq_wake(irq);
+	pinctrl_pm_select_default_state(dev);
 
 	serial8250_resume_port(data->line);
 

drivers/tty/serial/8250/8250_of.c

View file

diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 0277479..0826cfd 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -70,9 +70,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 		/* Get clk rate through clk driver if present */
 		info->clk = devm_clk_get(&ofdev->dev, NULL);
 		if (IS_ERR(info->clk)) {
-			dev_warn(&ofdev->dev,
-				"clk or clock-frequency not defined\n");
 			ret = PTR_ERR(info->clk);
+			if (ret != -EPROBE_DEFER)
+				dev_warn(&ofdev->dev,
+					 "failed to get clock: %d\n", ret);
 			goto err_pmruntime;
 		}
 
@@ -205,18 +206,16 @@ err_pmruntime:
 /*
  * Try to register a serial port
  */
-static const struct of_device_id of_platform_serial_table[];
 static int of_platform_serial_probe(struct platform_device *ofdev)
 {
-	const struct of_device_id *match;
 	struct of_serial_info *info;
 	struct uart_8250_port port8250;
+	unsigned int port_type;
 	u32 tx_threshold;
-	int port_type;
 	int ret;
 
-	match = of_match_device(of_platform_serial_table, &ofdev->dev);
-	if (!match)
+	port_type = (unsigned long)of_device_get_match_data(&ofdev->dev);
+	if (port_type == PORT_UNKNOWN)
 		return -EINVAL;
 
 	if (of_property_read_bool(ofdev->dev.of_node, "used-by-rtas"))
@@ -226,7 +225,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 	if (info == NULL)
 		return -ENOMEM;
 
-	port_type = (unsigned long)match->data;
 	memset(&port8250, 0, sizeof(port8250));
 	ret = of_platform_serial_setup(ofdev, port_type, &port8250.port, info);
 	if (ret)

drivers/tty/serial/8250/8250_omap.c

View file

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 0a83166..3ef65cb 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -141,18 +141,20 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 	serial8250_do_set_mctrl(port, mctrl);
 
-	/*
-	 * Turn off autoRTS if RTS is lowered and restore autoRTS setting
-	 * if RTS is raised
-	 */
-	lcr = serial_in(up, UART_LCR);
-	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
-	if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
-		priv->efr |= UART_EFR_RTS;
-	else
-		priv->efr &= ~UART_EFR_RTS;
-	serial_out(up, UART_EFR, priv->efr);
-	serial_out(up, UART_LCR, lcr);
+	if (!up->gpios) {
+		/*
+		 * Turn off autoRTS if RTS is lowered and restore autoRTS
+		 * setting if RTS is raised
+		 */
+		lcr = serial_in(up, UART_LCR);
+		serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+		if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
+			priv->efr |= UART_EFR_RTS;
+		else
+			priv->efr &= ~UART_EFR_RTS;
+		serial_out(up, UART_EFR, priv->efr);
+		serial_out(up, UART_LCR, lcr);
+	}
 }
 
 /*
@@ -453,7 +455,8 @@ static void omap_8250_set_termios(struct uart_port *port,
 	priv->efr = 0;
 	up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
 
-	if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
+	if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW &&
+	    !up->gpios) {
 		/* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */
 		up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
 		priv->efr |= UART_EFR_CTS;
@@ -923,15 +926,13 @@ static void omap_8250_dma_tx_complete(void *param)
 		ret = omap_8250_tx_dma(p);
 		if (ret)
 			en_thri = true;
-
 	} else if (p->capabilities & UART_CAP_RPM) {
 		en_thri = true;
 	}
 
 	if (en_thri) {
 		dma->tx_err = 1;
-		p->ier |= UART_IER_THRI;
-		serial_port_out(&p->port, UART_IER, p->ier);
+		serial8250_set_THRI(p);
 	}
 
 	spin_unlock_irqrestore(&p->port.lock, flags);
@@ -959,10 +960,7 @@ static int omap_8250_tx_dma(struct uart_8250_port *p)
 			ret = -EBUSY;
 			goto err;
 		}
-		if (p->ier & UART_IER_THRI) {
-			p->ier &= ~UART_IER_THRI;
-			serial_out(p, UART_IER, p->ier);
-		}
+		serial8250_clear_THRI(p);
 		return 0;
 	}
 
@@ -1020,10 +1018,7 @@ static int omap_8250_tx_dma(struct uart_8250_port *p)
 	if (dma->tx_err)
 		dma->tx_err = 0;
 
-	if (p->ier & UART_IER_THRI) {
-		p->ier &= ~UART_IER_THRI;
-		serial_out(p, UART_IER, p->ier);
-	}
+	serial8250_clear_THRI(p);
 	if (skip_byte)
 		serial_out(p, UART_TX, xmit->buf[xmit->tail]);
 	return 0;

drivers/tty/serial/8250/8250_pci.c

View file

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index df41397..7f740b3 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1326,7 +1326,36 @@ static int pci_default_setup(struct serial_private *priv,
 
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
-
+static void
+pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
+			       unsigned int quot, unsigned int quot_frac)
+{
+	int scr;
+	int lcr;
+	int actual_baud;
+	int tolerance;
+
+	for (scr = 5 ; scr <= 15 ; scr++) {
+		actual_baud = 921600 * 16 / scr;
+		tolerance = actual_baud / 50;
+
+		if ((baud < actual_baud + tolerance) &&
+			(baud > actual_baud - tolerance)) {
+
+			lcr = serial_port_in(port, UART_LCR);
+			serial_port_out(port, UART_LCR, lcr | 0x80);
+
+			serial_port_out(port, UART_DLL, 1);