Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

d7511ec8 · Linus Torvalds <[email protected]> · 2008-02-07 19:15:38 -08:00

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (59 commits)
  hwmon: (lm80) Add individual alarm files
  hwmon: (lm80) De-macro the sysfs callbacks
  hwmon: (lm80) Various cleanups
  hwmon: (w83627hf) Refactor beep enable handling
  hwmon: (w83627hf) Add individual alarm and beep files
  hwmon: (w83627hf) Enable VBAT monitoring
  hwmon: (w83627ehf) The W83627DHG has 8 VID pins
  hwmon: (asb100) Add individual alarm files
  hwmon: (asb100) De-macro the sysfs callbacks
  hwmon: (asb100) Various cleanups
  hwmon: VRM is not written to registers
  hwmon: (dme1737) fix Super-IO device ID override
  hwmon: (dme1737) fix divide-by-0
  hwmon: (abituguru3) Add AUX4 fan input for Abit IP35 Pro
  hwmon: Add support for Texas Instruments/Burr-Brown ADS7828
  hwmon: (adm9240) Add individual alarm files
  hwmon: (lm77) Add individual alarm files
  hwmon: Discard useless I2C driver IDs
  hwmon: (lm85) Make the pwmN_enable files writable
  hwmon: (lm85) Return standard values in pwmN_enable
  ...

Commit: d7511ec8115487ccea2ce93bf58d5e5cd2c1c0a3
Parents: 0b61a2ba · e84542f5

Merge commit. Changes below are compared with the first parent: 0b61a2ba.

Changes

60 files changed · +3689 −1731

File	Status	Add	Del	Content
Documentation/hwmon/ads7828	added	+36	−0	View file
Documentation/hwmon/it87	modified	+1	−1	View file
Documentation/hwmon/lm78	modified	+2	−2	View file
Documentation/hwmon/lm87	modified	+8	−3	View file
Documentation/hwmon/userspace-tools	modified	+1	−1	View file
Documentation/hwmon/w83627ehf	modified	+3	−2	View file
Documentation/hwmon/w83627hf	modified	+1	−2	View file
Documentation/hwmon/w83781d	modified	+8	−14	View file
Documentation/hwmon/w83l786ng	added	+54	−0	View file
Documentation/i2c/busses/i2c-piix4	modified	+1	−1	View file
drivers/firmware/dmi_scan.c	modified	+48	−14	View file
drivers/hwmon/Kconfig	modified	+25	−5	View file
drivers/hwmon/Makefile	modified	+2	−0	View file
drivers/hwmon/abituguru3.c	modified	+1	−0	View file
drivers/hwmon/adm1021.c	modified	+0	−1	View file
drivers/hwmon/adm1025.c	modified	+214	−179	View file
drivers/hwmon/adm1026.c	modified	+360	−272	View file
drivers/hwmon/adm1031.c	modified	+242	−259	View file
drivers/hwmon/adm9240.c	modified	+26	−1	View file
drivers/hwmon/ads7828.c	added	+297	−0	View file
drivers/hwmon/adt7470.c	modified	+85	−15	View file
drivers/hwmon/asb100.c	modified	+183	−212	View file
drivers/hwmon/dme1737.c	modified	+17	−6	View file
drivers/hwmon/ds1621.c	modified	+0	−1	View file
drivers/hwmon/f71805f.c	modified	+5	−1	View file
drivers/hwmon/f71882fg.c	modified	+5	−1	View file
drivers/hwmon/fscher.c	modified	+0	−1	View file
drivers/hwmon/fschmd.c	modified	+90	−4	View file
drivers/hwmon/fscpos.c	modified	+0	−1	View file
drivers/hwmon/gl518sm.c	modified	+181	−88	View file
drivers/hwmon/gl520sm.c	modified	+389	−259	View file
drivers/hwmon/it87.c	modified	+76	−12	View file
drivers/hwmon/lm75.c	modified	+0	−1	View file
drivers/hwmon/lm77.c	modified	+15	−5	View file
drivers/hwmon/lm78.c	modified	+2	−5	View file
drivers/hwmon/lm80.c	modified	+166	−162	View file
drivers/hwmon/lm83.c	modified	+0	−1	View file
drivers/hwmon/lm85.c	modified	+53	−11	View file
drivers/hwmon/lm87.c	modified	+20	−9	View file
drivers/hwmon/lm90.c	modified	+13	−14	View file
drivers/hwmon/lm92.c	modified	+0	−1	View file
drivers/hwmon/pc87360.c	modified	+5	−1	View file
drivers/hwmon/pc87427.c	modified	+5	−1	View file
drivers/hwmon/smsc47b397.c	modified	+5	−1	View file
drivers/hwmon/smsc47m1.c	modified	+5	−1	View file
drivers/hwmon/smsc47m192.c	modified	+1	−2	View file
drivers/hwmon/vt1211.c	modified	+7	−1	View file
drivers/hwmon/vt8231.c	modified	+1	−1	View file
drivers/hwmon/w83627ehf.c	modified	+17	−12	View file
drivers/hwmon/w83627hf.c	modified	+172	−53	View file
drivers/hwmon/w83781d.c	modified	+12	−37	View file
drivers/hwmon/w83791d.c	modified	+2	−4	View file
drivers/hwmon/w83793.c	modified	+3	−10	View file
drivers/hwmon/w83l785ts.c	modified	+0	−1	View file
drivers/hwmon/w83l786ng.c	added	+821	−0	View file
drivers/i2c/chips/eeprom.c	modified	+0	−1	View file
drivers/i2c/chips/pcf8574.c	modified	+0	−1	View file
drivers/i2c/chips/pcf8591.c	modified	+0	−1	View file
include/linux/dmi.h	modified	+3	−0	View file
include/linux/i2c-id.h	modified	+0	−36	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/hwmon/ads7828

View file

diff --git a/Documentation/hwmon/ads7828 b/Documentation/hwmon/ads7828
new file mode 100644
index 0000000..75bc4be
--- /dev/null
+++ b/Documentation/hwmon/ads7828
@@ -0,0 +1,36 @@
+Kernel driver ads7828
+=====================
+
+Supported chips:
+  * Texas Instruments/Burr-Brown ADS7828
+    Prefix: 'ads7828'
+    Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4b
+    Datasheet: Publicly available at the Texas Instruments website :
+               http://focus.ti.com/lit/ds/symlink/ads7828.pdf
+
+Authors:
+        Steve Hardy <[email protected]>
+
+Module Parameters
+-----------------
+
+* se_input: bool (default Y)
+  Single ended operation - set to N for differential mode
+* int_vref: bool (default Y)
+  Operate with the internal 2.5V reference - set to N for external reference
+* vref_mv: int (default 2500)
+  If using an external reference, set this to the reference voltage in mV
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments ADS7828.
+
+This device is a 12-bit 8-channel A-D converter.
+
+It can operate in single ended mode (8 +ve inputs) or in differential mode,
+where 4 differential pairs can be measured.
+
+The chip also has the facility to use an external voltage reference.  This
+may be required if your hardware supplies the ADS7828 from a 5V supply, see
+the datasheet for more details.

Documentation/hwmon/it87

View file

diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 5b704a4..f4ce1fd 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -30,7 +30,7 @@ Supported chips:
     Datasheet: No longer be available
 
 Authors:
-    Christophe Gauthron <[email protected]>
+    Christophe Gauthron
     Jean Delvare <[email protected]>
 
 

Documentation/hwmon/lm78

View file

diff --git a/Documentation/hwmon/lm78 b/Documentation/hwmon/lm78
index dfc318a..60932e2 100644
--- a/Documentation/hwmon/lm78
+++ b/Documentation/hwmon/lm78
@@ -4,12 +4,12 @@ Kernel driver lm78
 Supported chips:
   * National Semiconductor LM78 / LM78-J
     Prefix: 'lm78'
-    Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+    Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/
   * National Semiconductor LM79
     Prefix: 'lm79'
-    Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+    Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/
 

Documentation/hwmon/lm87

View file

diff --git a/Documentation/hwmon/lm87 b/Documentation/hwmon/lm87
index c952c57..ec27aa1 100644
--- a/Documentation/hwmon/lm87
+++ b/Documentation/hwmon/lm87
@@ -4,8 +4,12 @@ Kernel driver lm87
 Supported chips:
   * National Semiconductor LM87
     Prefix: 'lm87'
-    Addresses scanned: I2C 0x2c - 0x2f
+    Addresses scanned: I2C 0x2c - 0x2e
     Datasheet: http://www.national.com/pf/LM/LM87.html
+  * Analog Devices ADM1024
+    Prefix: 'adm1024'
+    Addresses scanned: I2C 0x2c - 0x2e
+    Datasheet: http://www.analog.com/en/prod/0,2877,ADM1024,00.html
 
 Authors:
         Frodo Looijaard <[email protected]>,
@@ -19,11 +23,12 @@ Authors:
 Description
 -----------
 
-This driver implements support for the National Semiconductor LM87.
+This driver implements support for the National Semiconductor LM87
+and the Analog Devices ADM1024.
 
 The LM87 implements up to three temperature sensors, up to two fan
 rotation speed sensors, up to seven voltage sensors, alarms, and some
-miscellaneous stuff.
+miscellaneous stuff. The ADM1024 is fully compatible.
 
 Temperatures are measured in degrees Celsius. Each input has a high
 and low alarm settings. A high limit produces an alarm when the value

Documentation/hwmon/userspace-tools

View file

diff --git a/Documentation/hwmon/userspace-tools b/Documentation/hwmon/userspace-tools
index 19900a8..9865aee 100644
--- a/Documentation/hwmon/userspace-tools
+++ b/Documentation/hwmon/userspace-tools
@@ -14,7 +14,7 @@ Lm-sensors
 
 Core set of utilities that will allow you to obtain health information,
 setup monitoring limits etc. You can get them on their homepage
-http://www.lm-sensors.nu/ or as a package from your Linux distribution.
+http://www.lm-sensors.org/ or as a package from your Linux distribution.
 
 If from website:
 Get lm-sensors from project web site. Please note, you need only userspace

Documentation/hwmon/w83627ehf

View file

diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index ccc2bcb..d6e1ae3 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -23,8 +23,9 @@ W83627DHG super I/O chips. We will refer to them collectively as Winbond chips.
 
 The chips implement three temperature sensors, five fan rotation
 speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
-VID (6 pins), alarms with beep warnings (control unimplemented), and
-some automatic fan regulation strategies (plus manual fan control mode).
+VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG), alarms with beep
+warnings (control unimplemented), and some automatic fan regulation
+strategies (plus manual fan control mode).
 
 Temperatures are measured in degrees Celsius and measurement resolution is 1
 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when

Documentation/hwmon/w83627hf

View file

diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index 7922319..880a59f 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -73,5 +73,4 @@ doesn't help, you may just ignore the bogus VID reading with no harm done.
 
 For further information on this driver see the w83781d driver documentation.
 
-[1] http://www2.lm-sensors.nu/~lm78/cvs/browse.cgi/lm_sensors2/doc/vid
-
+[1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid

Documentation/hwmon/w83781d

View file

diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d
index b1e9f80..6f800a0 100644
--- a/Documentation/hwmon/w83781d
+++ b/Documentation/hwmon/w83781d
@@ -4,20 +4,16 @@ Kernel driver w83781d
 Supported chips:
   * Winbond W83781D
     Prefix: 'w83781d'
-    Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+    Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
     Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf
   * Winbond W83782D
     Prefix: 'w83782d'
-    Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+    Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
     Datasheet: http://www.winbond.com/PDF/sheet/w83782d.pdf
   * Winbond W83783S
     Prefix: 'w83783s'
     Addresses scanned: I2C 0x2d
     Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
-  * Winbond W83627HF
-    Prefix: 'w83627hf'
-    Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
-    Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
   * Asus AS99127F
     Prefix: 'as99127f'
     Addresses scanned: I2C 0x28 - 0x2f
@@ -50,20 +46,18 @@ force_subclients=bus,caddr,saddr,saddr
 Description
 -----------
 
-This driver implements support for the Winbond W83781D, W83782D, W83783S,
-W83627HF chips, and the Asus AS99127F chips. We will refer to them
-collectively as W8378* chips.
+This driver implements support for the Winbond W83781D, W83782D, W83783S
+chips, and the Asus AS99127F chips. We will refer to them collectively as
+W8378* chips.
 
 There is quite some difference between these chips, but they are similar
 enough that it was sensible to put them together in one driver.
-The W83627HF chip is assumed to be identical to the ISA W83782D.
 The Asus chips are similar to an I2C-only W83782D.
 
 Chip        #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
 as99127f    7       3       0       3       0x31    0x12c3  yes     no
 as99127f rev.2 (type_name = as99127f)       0x31    0x5ca3  yes     no
 w83781d     7       3       0       3       0x10-1  0x5ca3  yes     yes
-w83627hf    9       3       2       3       0x21    0x5ca3  yes     yes(LPC)
 w83782d     9       3       2-4     3       0x30    0x5ca3  yes     yes
 w83783s     5-6     3       2       1-2     0x40    0x5ca3  yes     no
 
@@ -143,9 +137,9 @@ Individual alarm and beep bits:
 0x000400: in6
 0x000800: fan3
 0x001000: chassis
-0x002000: temp3 (W83782D and W83627HF only)
-0x010000: in7 (W83782D and W83627HF only)
-0x020000: in8 (W83782D and W83627HF only)
+0x002000: temp3 (W83782D only)
+0x010000: in7 (W83782D only)
+0x020000: in8 (W83782D only)
 
 If an alarm triggers, it will remain triggered until the hardware register
 is read at least once. This means that the cause for the alarm may

Documentation/hwmon/w83l786ng

View file

diff --git a/Documentation/hwmon/w83l786ng b/Documentation/hwmon/w83l786ng
new file mode 100644
index 0000000..d8f55d7
--- /dev/null
+++ b/Documentation/hwmon/w83l786ng
@@ -0,0 +1,54 @@
+Kernel driver w83l786ng
+=====================
+
+Supported chips:
+  * Winbond W83L786NG/W83L786NR
+    Prefix: 'w83l786ng'
+    Addresses scanned: I2C 0x2e - 0x2f
+    Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L786NRNG09.pdf
+
+Author: Kevin Lo <[email protected]>
+
+
+Module Parameters
+-----------------
+
+* reset boolean
+  (default 0)
+  Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
+  behavior is no chip reset to preserve BIOS settings
+
+
+Description
+-----------
+
+This driver implements support for Winbond W83L786NG/W83L786NR chips.
+
+The driver implements two temperature sensors, two fan rotation speed
+sensors, and three voltage sensors.
+
+Temperatures are measured in degrees Celsius and measurement resolution is 1
+degC for temp1 and temp2.
+
+Fan rotation speeds are reported in RPM (rotations per minute). Fan readings
+readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64
+or 128 for fan 1/2) to give the readings more range or accuracy.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+/sys files
+----------
+
+pwm[1-2] - this file stores PWM duty cycle or DC value (fan speed) in range:
+	    0 (stop) to 255 (full)
+pwm[1-2]_enable - this file controls mode of fan/temperature control:
+            * 0 Manual Mode
+            * 1 Thermal Cruise
+            * 2 Smart Fan II
+            * 4 FAN_SET
+pwm[1-2]_mode - Select PWM of DC mode
+            * 0 DC
+            * 1 PWM
+tolerance[1-2] - Value in degrees of Celsius (degC) for +- T

Documentation/i2c/busses/i2c-piix4

View file

diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index cf6b6cb..ef1efa7 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -95,4 +95,4 @@ of all affected systems, so the only safe solution was to prevent access to
 the SMBus on all IBM systems (detected using DMI data.)
 
 For additional information, read:
-http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/README.thinkpad
+http://www.lm-sensors.org/browser/lm-sensors/trunk/README.thinkpad

drivers/firmware/dmi_scan.c

View file

diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index e0bade7..1412d7b 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -43,18 +43,12 @@ static char * __init dmi_string(const struct dmi_header *dm, u8 s)
  *	We have to be cautious here. We have seen BIOSes with DMI pointers
  *	pointing to completely the wrong place for example
  */
-static int __init dmi_table(u32 base, int len, int num,
-			    void (*decode)(const struct dmi_header *))
+static void dmi_table(u8 *buf, int len, int num,
+		      void (*decode)(const struct dmi_header *))
 {
-	u8 *buf, *data;
+	u8 *data = buf;
 	int i = 0;
 
-	buf = dmi_ioremap(base, len);
-	if (buf == NULL)
-		return -1;
-
-	data = buf;
-
 	/*
 	 *	Stop when we see all the items the table claimed to have
 	 *	OR we run off the end of the table (also happens)
@@ -75,7 +69,23 @@ static int __init dmi_table(u32 base, int len, int num,
 		data += 2;
 		i++;
 	}
-	dmi_iounmap(buf, len);
+}
+
+static u32 dmi_base;
+static u16 dmi_len;
+static u16 dmi_num;
+
+static int __init dmi_walk_early(void (*decode)(const struct dmi_header *))
+{
+	u8 *buf;
+
+	buf = dmi_ioremap(dmi_base, dmi_len);
+	if (buf == NULL)
+		return -1;
+
+	dmi_table(buf, dmi_len, dmi_num, decode);
+
+	dmi_iounmap(buf, dmi_len);
 	return 0;
 }
 
@@ -291,9 +301,9 @@ static int __init dmi_present(const char __iomem *p)
 
 	memcpy_fromio(buf, p, 15);
 	if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
-		u16 num = (buf[13] << 8) | buf[12];
-		u16 len = (buf[7] << 8) | buf[6];
-		u32 base = (buf[11] << 24) | (buf[10] << 16) |
+		dmi_num = (buf[13] << 8) | buf[12];
+		dmi_len = (buf[7] << 8) | buf[6];
+		dmi_base = (buf[11] << 24) | (buf[10] << 16) |
 			(buf[9] << 8) | buf[8];
 
 		/*
@@ -305,7 +315,7 @@ static int __init dmi_present(const char __iomem *p)
 			       buf[14] >> 4, buf[14] & 0xF);
 		else
 			printk(KERN_INFO "DMI present.\n");
-		if (dmi_table(base,len, num, dmi_decode) == 0)
+		if (dmi_walk_early(dmi_decode) == 0)
 			return 0;
 	}
 	return 1;
@@ -489,3 +499,27 @@ int dmi_get_year(int field)
 
 	return year;
 }
+
+/**
+ *	dmi_walk - Walk the DMI table and get called back for every record
+ *	@decode: Callback function
+ *
+ *	Returns -1 when the DMI table can't be reached, 0 on success.
+ */
+int dmi_walk(void (*decode)(const struct dmi_header *))
+{
+	u8 *buf;
+
+	if (!dmi_available)
+		return -1;
+
+	buf = ioremap(dmi_base, dmi_len);
+	if (buf == NULL)
+		return -1;
+
+	dmi_table(buf, dmi_len, dmi_num, decode);
+
+	iounmap(buf);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dmi_walk);

drivers/hwmon/Kconfig

View file

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index a0445be..410ffe4 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -433,12 +433,12 @@ config SENSORS_LM85
 	  will be called lm85.
 
 config SENSORS_LM87
-	tristate "National Semiconductor LM87"
+	tristate "National Semiconductor LM87 and compatibles"
 	depends on I2C
 	select HWMON_VID
 	help
 	  If you say yes here you get support for National Semiconductor LM87
-	  sensor chips.
+	  and Analog Devices ADM1024 sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm87.
@@ -588,6 +588,16 @@ config SENSORS_SMSC47B397
 	  This driver can also be built as a module.  If so, the module
 	  will be called smsc47b397.
 
+config SENSORS_ADS7828
+	tristate "Texas Instruments ADS7828"
+	depends on I2C
+	help
+	  If you say yes here you get support for Texas Instruments ADS7828
+	  12-bit 8-channel ADC device.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ads7828.
+
 config SENSORS_THMC50
 	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
 	depends on I2C && EXPERIMENTAL
@@ -631,13 +641,13 @@ config SENSORS_VT8231
 	  will be called vt8231.
 
 config SENSORS_W83781D
-	tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
+	tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
 	depends on I2C
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the Winbond W8378x series
-	  of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
-	  and the similar Asus AS99127F.
+	  of sensor chips: the W83781D, W83782D and W83783S, and the similar
+	  Asus AS99127F.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83781d.
@@ -683,6 +693,16 @@ config SENSORS_W83L785TS
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83l785ts.
 
+config SENSORS_W83L786NG
+	tristate "Winbond W83L786NG, W83L786NR"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Winbond W83L786NG
+	  and W83L786NR sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called w83l786ng.
+
 config SENSORS_W83627HF
 	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
 	select HWMON_VID

drivers/hwmon/Makefile

View file

diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 55595f6..8241613 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_SENSORS_ADM1026)	+= adm1026.o
 obj-$(CONFIG_SENSORS_ADM1029)	+= adm1029.o
 obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
 obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
+obj-$(CONFIG_SENSORS_ADS7828)	+= ads7828.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_AMS)	+= ams/
@@ -68,6 +69,7 @@ obj-$(CONFIG_SENSORS_VT1211)	+= vt1211.o
 obj-$(CONFIG_SENSORS_VT8231)	+= vt8231.o
 obj-$(CONFIG_SENSORS_W83627EHF)	+= w83627ehf.o
 obj-$(CONFIG_SENSORS_W83L785TS)	+= w83l785ts.o
+obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
 
 ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG

drivers/hwmon/abituguru3.c

View file

diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index d9f04ce..ed33fdd 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -528,6 +528,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		33, 2, 60, 1, 0 },
 		{ "AUX2 Fan",		35, 2, 60, 1, 0 },
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
+		{ "AUX4 Fan",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
 	{ 0x001B, "unknown", {

drivers/hwmon/adm1021.c

View file

diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index ebdc6d7..b96be77 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -115,7 +115,6 @@ static struct i2c_driver adm1021_driver = {
 	.driver = {
 		.name	= "adm1021",
 	},
-	.id		= I2C_DRIVERID_ADM1021,
 	.attach_adapter	= adm1021_attach_adapter,
 	.detach_client	= adm1021_detach_client,
 };

drivers/hwmon/adm1025.c

View file

diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 041ecb0..e96c372 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -51,6 +51,7 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
@@ -74,7 +75,7 @@ I2C_CLIENT_INSMOD_2(adm1025, ne1619);
  */
 
 #define ADM1025_REG_MAN_ID		0x3E
-#define ADM1025_REG_CHIP_ID 		0x3F
+#define ADM1025_REG_CHIP_ID		0x3F
 #define ADM1025_REG_CONFIG		0x40
 #define ADM1025_REG_STATUS1		0x41
 #define ADM1025_REG_STATUS2		0x42
@@ -92,7 +93,7 @@ I2C_CLIENT_INSMOD_2(adm1025, ne1619);
  * The ADM1025 uses signed 8-bit values for temperatures.
  */
 
-static int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
+static const int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
 
 #define IN_FROM_REG(reg,scale)	(((reg) * (scale) + 96) / 192)
 #define IN_TO_REG(val,scale)	((val) <= 0 ? 0 : \
@@ -122,7 +123,6 @@ static struct i2c_driver adm1025_driver = {
 	.driver = {
 		.name	= "adm1025",
 	},
-	.id		= I2C_DRIVERID_ADM1025,
 	.attach_adapter	= adm1025_attach_adapter,
 	.detach_client	= adm1025_detach_client,
 };
@@ -153,86 +153,96 @@ struct adm1025_data {
  * Sysfs stuff
  */
 
-#define show_in(offset) \
-static ssize_t show_in##offset(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
-		       in_scale[offset])); \
-} \
-static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
-		       in_scale[offset])); \
-} \
-static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
-		       in_scale[offset])); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);
-show_in(0);
-show_in(1);
-show_in(2);
-show_in(3);
-show_in(4);
-show_in(5);
-
-#define show_temp(offset) \
-static ssize_t show_temp##offset(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
-} \
-static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \
-} \
-static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \
-}\
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp##offset, NULL);
-show_temp(1);
-show_temp(2);
+static ssize_t
+show_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	int index = to_sensor_dev_attr(attr)->index;
+	struct adm1025_data *data = adm1025_update_device(dev);
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[index],
+		       in_scale[index]));
+}
+
+static ssize_t
+show_in_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	int index = to_sensor_dev_attr(attr)->index;
+	struct adm1025_data *data = adm1025_update_device(dev);
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[index],
+		       in_scale[index]));