Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

d9351ea1 · Linus Torvalds <[email protected]> · 2019-05-19 10:58:45 -07:00

Pull IRQ chip updates from Ingo Molnar:
 "A late irqchips update:

   - New TI INTR/INTA set of drivers

   - Rewrite of the stm32mp1-exti driver as a platform driver

   - Update the IOMMU MSI mapping API to be RT friendly

   - A number of cleanups and other low impact fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
  irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
  irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
  irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
  irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
  iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
  genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
  arm64: arch_k3: Enable interrupt controller drivers
  irqchip/ti-sci-inta: Add msi domain support
  soc: ti: Add MSI domain bus support for Interrupt Aggregator
  irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
  dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
  irqchip/ti-sci-intr: Add support for Interrupt Router driver
  dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
  gpio: thunderx: Use the default parent apis for {request,release}_resources
  genirq: Introduce irq_chip_{request,release}_resource_parent() apis
  firmware: ti_sci: Add helper apis to manage resources
  firmware: ti_sci: Add RM mapping table for am654
  firmware: ti_sci: Add support for IRQ management
  firmware: ti_sci: Add support for RM core ops
  ...

Commit: d9351ea14ddca708d3cb384f828af4bf82fcc772
Parents: 39feaa3f · fb4e0592

Merge commit. Changes below are compared with the first parent: 39feaa3f.

Changes

38 files changed · +2511 −229

File	Status	Add	Del	Content
Documentation/devicetree/bindings/arm/keystone/ti,sci.txt	modified	+2	−1	View file
Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt	added	+66	−0	View file
Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt	added	+82	−0	View file
MAINTAINERS	modified	+6	−0	View file
arch/arm64/Kconfig.platforms	modified	+5	−0	View file
drivers/firmware/ti_sci.c	modified	+651	−0	View file
drivers/firmware/ti_sci.h	modified	+102	−0	View file
drivers/gpio/gpio-thunderx.c	modified	+4	−12	View file
drivers/iommu/Kconfig	modified	+1	−0	View file
drivers/iommu/dma-iommu.c	modified	+28	−20	View file
drivers/irqchip/Kconfig	modified	+21	−6	View file
drivers/irqchip/Makefile	modified	+2	−0	View file
drivers/irqchip/irq-bcm7038-l1.c	modified	+3	−0	View file
drivers/irqchip/irq-bcm7120-l2.c	modified	+3	−0	View file
drivers/irqchip/irq-brcmstb-l2.c	modified	+2	−0	View file
drivers/irqchip/irq-gic-pm.c	modified	+39	−37	View file
drivers/irqchip/irq-gic-v2m.c	modified	+7	−1	View file
drivers/irqchip/irq-gic-v3-its.c	modified	+43	−41	View file
drivers/irqchip/irq-gic-v3-mbi.c	modified	+8	−2	View file
drivers/irqchip/irq-imx-irqsteer.c	modified	+1	−3	View file
drivers/irqchip/irq-ls-scfg-msi.c	modified	+6	−1	View file
drivers/irqchip/irq-renesas-intc-irqpin.c	modified	+1	−3	View file
drivers/irqchip/irq-stm32-exti.c	modified	+140	−93	View file
drivers/irqchip/irq-ti-sci-inta.c	added	+615	−0	View file
drivers/irqchip/irq-ti-sci-intr.c	added	+275	−0	View file
drivers/soc/ti/Kconfig	modified	+6	−0	View file
drivers/soc/ti/Makefile	modified	+1	−0	View file
drivers/soc/ti/ti_sci_inta_msi.c	added	+146	−0	View file
include/linux/dma-iommu.h	modified	+22	−2	View file
include/linux/irq.h	modified	+2	−0	View file
include/linux/irqchip/arm-gic-v3.h	modified	+6	−6	View file
include/linux/irqdomain.h	modified	+1	−0	View file
include/linux/msi.h	modified	+36	−0	View file
include/linux/soc/ti/ti_sci_inta_msi.h	added	+23	−0	View file
include/linux/soc/ti/ti_sci_protocol.h	modified	+124	−0	View file
kernel/irq/Kconfig	modified	+3	−0	View file
kernel/irq/chip.c	modified	+27	−0	View file
kernel/irq/irqdomain.c	modified	+1	−1	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/arm/keystone/ti,sci.txt

View file

diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
index b56a02c..6f0cd31 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
@@ -24,7 +24,8 @@ relationship between the TI-SCI parent node to the child node.
 
 Required properties:
 -------------------
-- compatible: should be "ti,k2g-sci"
+- compatible:	should be "ti,k2g-sci" for TI 66AK2G SoC
+		should be "ti,am654-sci" for for TI AM654 SoC
 - mbox-names:
 	"rx" - Mailbox corresponding to receive path
 	"tx" - Mailbox corresponding to transmit path

Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
new file mode 100644
index 0000000..7841cb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
@@ -0,0 +1,66 @@
+Texas Instruments K3 Interrupt Aggregator
+=========================================
+
+The Interrupt Aggregator (INTA) provides a centralized machine
+which handles the termination of system events to that they can
+be coherently processed by the host(s) in the system. A maximum
+of 64 events can be mapped to a single interrupt.
+
+
+                              Interrupt Aggregator
+                     +-----------------------------------------+
+                     |      Intmap            VINT             |
+                     | +--------------+  +------------+        |
+            m ------>| | vint  | bit  |  | 0 |.....|63| vint0  |
+               .     | +--------------+  +------------+        |       +------+
+               .     |         .               .               |       | HOST |
+Globalevents  ------>|         .               .               |------>| IRQ  |
+               .     |         .               .               |       | CTRL |
+               .     |         .               .               |       +------+
+            n ------>| +--------------+  +------------+        |
+                     | | vint  | bit  |  | 0 |.....|63| vintx  |
+                     | +--------------+  +------------+        |
+                     |                                         |
+                     +-----------------------------------------+
+
+Configuration of these Intmap registers that maps global events to vint is done
+by a system controller (like the Device Memory and Security Controller on K3
+AM654 SoC). Driver should request the system controller to get the range
+of global events and vints assigned to the requesting host. Management
+of these requested resources should be handled by driver and requests
+system controller to map specific global event to vint, bit pair.
+
+Communication between the host processor running an OS and the system
+controller happens through a protocol called TI System Control Interface
+(TISCI protocol). For more details refer:
+Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+TISCI Interrupt Aggregator Node:
+-------------------------------
+- compatible:		Must be "ti,sci-inta".
+- reg:			Should contain registers location and length.
+- interrupt-controller:	Identifies the node as an interrupt controller
+- msi-controller:	Identifies the node as an MSI controller.
+- interrupt-parent:	phandle of irq parent.
+- ti,sci:		Phandle to TI-SCI compatible System controller node.
+- ti,sci-dev-id:	TISCI device ID of the Interrupt Aggregator.
+- ti,sci-rm-range-vint:	Array of TISCI subtype ids representing vints(inta
+			outputs) range within this INTA, assigned to the
+			requesting host context.
+- ti,sci-rm-range-global-event:	Array of TISCI subtype ids representing the
+			global events range reaching this IA and are assigned
+			to the requesting host context.
+
+Example:
+--------
+main_udmass_inta: interrupt-controller@33d00000 {
+	compatible = "ti,sci-inta";
+	reg = <0x0 0x33d00000 0x0 0x100000>;
+	interrupt-controller;
+	msi-controller;
+	interrupt-parent = <&main_navss_intr>;
+	ti,sci = <&dmsc>;
+	ti,sci-dev-id = <179>;
+	ti,sci-rm-range-vint = <0x0>;
+	ti,sci-rm-range-global-event = <0x1>;
+};

Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt

View file

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
new file mode 100644
index 0000000..1a8718f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
@@ -0,0 +1,82 @@
+Texas Instruments K3 Interrupt Router
+=====================================
+
+The Interrupt Router (INTR) module provides a mechanism to mux M
+interrupt inputs to N interrupt outputs, where all M inputs are selectable
+to be driven per N output. An Interrupt Router can either handle edge triggered
+or level triggered interrupts and that is fixed in hardware.
+
+                                 Interrupt Router
+                             +----------------------+
+                             |  Inputs     Outputs  |
+        +-------+            | +------+    +-----+  |
+        | GPIO  |----------->| | irq0 |    |  0  |  |       Host IRQ
+        +-------+            | +------+    +-----+  |      controller
+                             |    .           .     |      +-------+
+        +-------+            |    .           .     |----->|  IRQ  |
+        | INTA  |----------->|    .           .     |      +-------+
+        +-------+            |    .        +-----+  |
+                             | +------+    |  N  |  |
+                             | | irqM |    +-----+  |
+                             | +------+             |
+                             |                      |
+                             +----------------------+
+
+There is one register per output (MUXCNTL_N) that controls the selection.
+Configuration of these MUXCNTL_N registers is done by a system controller
+(like the Device Memory and Security Controller on K3 AM654 SoC). System
+controller will keep track of the used and unused registers within the Router.
+Driver should request the system controller to get the range of GIC IRQs
+assigned to the requesting hosts. It is the drivers responsibility to keep
+track of Host IRQs.
+
+Communication between the host processor running an OS and the system
+controller happens through a protocol called TI System Control Interface
+(TISCI protocol). For more details refer:
+Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+TISCI Interrupt Router Node:
+----------------------------
+Required Properties:
+- compatible:		Must be "ti,sci-intr".
+- ti,intr-trigger-type:	Should be one of the following:
+			1: If intr supports edge triggered interrupts.
+			4: If intr supports level triggered interrupts.
+- interrupt-controller:	Identifies the node as an interrupt controller
+- #interrupt-cells:	Specifies the number of cells needed to encode an
+			interrupt source. The value should be 2.
+			First cell should contain the TISCI device ID of source
+			Second cell should contain the interrupt source offset
+			within the device.
+- ti,sci:		Phandle to TI-SCI compatible System controller node.
+- ti,sci-dst-id:	TISCI device ID of the destination IRQ controller.
+- ti,sci-rm-range-girq:	Array of TISCI subtype ids representing the host irqs
+			assigned to this interrupt router. Each subtype id
+			corresponds to a range of host irqs.
+
+For more details on TISCI IRQ resource management refer:
+http://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
+
+Example:
+--------
+The following example demonstrates both interrupt router node and the consumer
+node(main gpio) on the AM654 SoC:
+
+main_intr: interrupt-controller0 {
+	compatible = "ti,sci-intr";
+	ti,intr-trigger-type = <1>;
+	interrupt-controller;
+	interrupt-parent = <&gic500>;
+	#interrupt-cells = <2>;
+	ti,sci = <&dmsc>;
+	ti,sci-dst-id = <56>;
+	ti,sci-rm-range-girq = <0x1>;
+};
+
+main_gpio0: gpio@600000 {
+	...
+	interrupt-parent = <&main_intr>;
+	interrupts = <57 256>, <57 257>, <57 258>,
+		     <57 259>, <57 260>, <57 261>;
+	...
+};

MAINTAINERS

View file

diff --git a/MAINTAINERS b/MAINTAINERS
index 9cc6767..4f4dd94 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15547,6 +15547,12 @@ F:	Documentation/devicetree/bindings/reset/ti,sci-reset.txt
 F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
 F:	drivers/clk/keystone/sci-clk.c
 F:	drivers/reset/reset-ti-sci.c
+F:	Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
+F:	drivers/irqchip/irq-ti-sci-intr.c
+F:	drivers/irqchip/irq-ti-sci-inta.c
+F:	include/linux/soc/ti/ti_sci_inta_msi.h
+F:	drivers/soc/ti/ti_sci_inta_msi.c
 
 Texas Instruments ASoC drivers
 M:	Peter Ujfalusi <[email protected]>

arch/arm64/Kconfig.platforms

View file

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 1001410..42eca65 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -87,6 +87,11 @@ config ARCH_EXYNOS
 config ARCH_K3
 	bool "Texas Instruments Inc. K3 multicore SoC architecture"
 	select PM_GENERIC_DOMAINS if PM
+	select MAILBOX
+	select TI_MESSAGE_MANAGER
+	select TI_SCI_PROTOCOL
+	select TI_SCI_INTR_IRQCHIP
+	select TI_SCI_INTA_IRQCHIP
 	help
 	  This enables support for Texas Instruments' K3 multicore SoC
 	  architecture.

drivers/firmware/ti_sci.c

View file

diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 3fbbb61..ef93406 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -65,18 +65,36 @@ struct ti_sci_xfers_info {
 };
 
 /**
+ * struct ti_sci_rm_type_map - Structure representing TISCI Resource
+ *				management representation of dev_ids.
+ * @dev_id:	TISCI device ID
+ * @type:	Corresponding id as identified by TISCI RM.
+ *
+ * Note: This is used only as a work around for using RM range apis
+ *	for AM654 SoC. For future SoCs dev_id will be used as type
+ *	for RM range APIs. In order to maintain ABI backward compatibility
+ *	type is not being changed for AM654 SoC.
+ */
+struct ti_sci_rm_type_map {
+	u32 dev_id;
+	u16 type;
+};
+
+/**
  * struct ti_sci_desc - Description of SoC integration
  * @default_host_id:	Host identifier representing the compute entity
  * @max_rx_timeout_ms:	Timeout for communication with SoC (in Milliseconds)
  * @max_msgs: Maximum number of messages that can be pending
  *		  simultaneously in the system
  * @max_msg_size: Maximum size of data per message that can be handled.
+ * @rm_type_map: RM resource type mapping structure.
  */
 struct ti_sci_desc {
 	u8 default_host_id;
 	int max_rx_timeout_ms;
 	int max_msgs;
 	int max_msg_size;
+	struct ti_sci_rm_type_map *rm_type_map;
 };
 
 /**
@@ -1600,6 +1618,392 @@ fail:
 	return ret;
 }
 
+static int ti_sci_get_resource_type(struct ti_sci_info *info, u16 dev_id,
+				    u16 *type)
+{
+	struct ti_sci_rm_type_map *rm_type_map = info->desc->rm_type_map;
+	bool found = false;
+	int i;
+
+	/* If map is not provided then assume dev_id is used as type */
+	if (!rm_type_map) {
+		*type = dev_id;
+		return 0;
+	}
+
+	for (i = 0; rm_type_map[i].dev_id; i++) {
+		if (rm_type_map[i].dev_id == dev_id) {
+			*type = rm_type_map[i].type;
+			found = true;
+			break;
+		}
+	}
+
+	if (!found)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * ti_sci_get_resource_range - Helper to get a range of resources assigned
+ *			       to a host. Resource is uniquely identified by
+ *			       type and subtype.
+ * @handle:		Pointer to TISCI handle.
+ * @dev_id:		TISCI device ID.
+ * @subtype:		Resource assignment subtype that is being requested
+ *			from the given device.
+ * @s_host:		Host processor ID to which the resources are allocated
+ * @range_start:	Start index of the resource range
+ * @range_num:		Number of resources in the range
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
+				     u32 dev_id, u8 subtype, u8 s_host,
+				     u16 *range_start, u16 *range_num)
+{
+	struct ti_sci_msg_resp_get_resource_range *resp;
+	struct ti_sci_msg_req_get_resource_range *req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	u16 type;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_RESOURCE_RANGE,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+
+	ret = ti_sci_get_resource_type(info, dev_id, &type);
+	if (ret) {
+		dev_err(dev, "rm type lookup failed for %u\n", dev_id);
+		goto fail;
+	}
+
+	req = (struct ti_sci_msg_req_get_resource_range *)xfer->xfer_buf;
+	req->secondary_host = s_host;
+	req->type = type & MSG_RM_RESOURCE_TYPE_MASK;
+	req->subtype = subtype & MSG_RM_RESOURCE_SUBTYPE_MASK;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_resp_get_resource_range *)xfer->xfer_buf;
+
+	if (!ti_sci_is_response_ack(resp)) {
+		ret = -ENODEV;
+	} else if (!resp->range_start && !resp->range_num) {
+		ret = -ENODEV;
+	} else {
+		*range_start = resp->range_start;
+		*range_num = resp->range_num;
+	};
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_get_resource_range - Get a range of resources assigned to host
+ *				   that is same as ti sci interface host.
+ * @handle:		Pointer to TISCI handle.
+ * @dev_id:		TISCI device ID.
+ * @subtype:		Resource assignment subtype that is being requested
+ *			from the given device.
+ * @range_start:	Start index of the resource range
+ * @range_num:		Number of resources in the range
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_get_resource_range(const struct ti_sci_handle *handle,
+					 u32 dev_id, u8 subtype,
+					 u16 *range_start, u16 *range_num)
+{
+	return ti_sci_get_resource_range(handle, dev_id, subtype,
+					 TI_SCI_IRQ_SECONDARY_HOST_INVALID,
+					 range_start, range_num);
+}
+
+/**
+ * ti_sci_cmd_get_resource_range_from_shost - Get a range of resources
+ *					      assigned to a specified host.
+ * @handle:		Pointer to TISCI handle.
+ * @dev_id:		TISCI device ID.
+ * @subtype:		Resource assignment subtype that is being requested
+ *			from the given device.
+ * @s_host:		Host processor ID to which the resources are allocated
+ * @range_start:	Start index of the resource range
+ * @range_num:		Number of resources in the range
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static
+int ti_sci_cmd_get_resource_range_from_shost(const struct ti_sci_handle *handle,
+					     u32 dev_id, u8 subtype, u8 s_host,
+					     u16 *range_start, u16 *range_num)
+{
+	return ti_sci_get_resource_range(handle, dev_id, subtype, s_host,
+					 range_start, range_num);
+}
+
+/**
+ * ti_sci_manage_irq() - Helper api to configure/release the irq route between
+ *			 the requested source and destination
+ * @handle:		Pointer to TISCI handle.
+ * @valid_params:	Bit fields defining the validity of certain params
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @dst_id:		Device ID of the IRQ destination
+ * @dst_host_irq:	IRQ number of the destination device
+ * @ia_id:		Device ID of the IA, if the IRQ flows through this IA
+ * @vint:		Virtual interrupt to be used within the IA
+ * @global_event:	Global event number to be used for the requesting event
+ * @vint_status_bit:	Virtual interrupt status bit to be used for the event
+ * @s_host:		Secondary host ID to which the irq/event is being
+ *			requested for.
+ * @type:		Request type irq set or release.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_manage_irq(const struct ti_sci_handle *handle,
+			     u32 valid_params, u16 src_id, u16 src_index,
+			     u16 dst_id, u16 dst_host_irq, u16 ia_id, u16 vint,
+			     u16 global_event, u8 vint_status_bit, u8 s_host,
+			     u16 type)
+{
+	struct ti_sci_msg_req_manage_irq *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, type, TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_manage_irq *)xfer->xfer_buf;
+	req->valid_params = valid_params;
+	req->src_id = src_id;
+	req->src_index = src_index;
+	req->dst_id = dst_id;
+	req->dst_host_irq = dst_host_irq;
+	req->ia_id = ia_id;
+	req->vint = vint;
+	req->global_event = global_event;
+	req->vint_status_bit = vint_status_bit;
+	req->secondary_host = s_host;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_set_irq() - Helper api to configure the irq route between the
+ *		      requested source and destination
+ * @handle:		Pointer to TISCI handle.
+ * @valid_params:	Bit fields defining the validity of certain params
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @dst_id:		Device ID of the IRQ destination
+ * @dst_host_irq:	IRQ number of the destination device
+ * @ia_id:		Device ID of the IA, if the IRQ flows through this IA
+ * @vint:		Virtual interrupt to be used within the IA
+ * @global_event:	Global event number to be used for the requesting event
+ * @vint_status_bit:	Virtual interrupt status bit to be used for the event
+ * @s_host:		Secondary host ID to which the irq/event is being
+ *			requested for.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_set_irq(const struct ti_sci_handle *handle, u32 valid_params,
+			  u16 src_id, u16 src_index, u16 dst_id,
+			  u16 dst_host_irq, u16 ia_id, u16 vint,
+			  u16 global_event, u8 vint_status_bit, u8 s_host)
+{
+	pr_debug("%s: IRQ set with valid_params = 0x%x from src = %d, index = %d, to dst = %d, irq = %d,via ia_id = %d, vint = %d, global event = %d,status_bit = %d\n",
+		 __func__, valid_params, src_id, src_index,
+		 dst_id, dst_host_irq, ia_id, vint, global_event,
+		 vint_status_bit);
+
+	return ti_sci_manage_irq(handle, valid_params, src_id, src_index,
+				 dst_id, dst_host_irq, ia_id, vint,
+				 global_event, vint_status_bit, s_host,
+				 TI_SCI_MSG_SET_IRQ);
+}
+
+/**
+ * ti_sci_free_irq() - Helper api to free the irq route between the
+ *			   requested source and destination
+ * @handle:		Pointer to TISCI handle.
+ * @valid_params:	Bit fields defining the validity of certain params
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @dst_id:		Device ID of the IRQ destination
+ * @dst_host_irq:	IRQ number of the destination device
+ * @ia_id:		Device ID of the IA, if the IRQ flows through this IA
+ * @vint:		Virtual interrupt to be used within the IA
+ * @global_event:	Global event number to be used for the requesting event
+ * @vint_status_bit:	Virtual interrupt status bit to be used for the event
+ * @s_host:		Secondary host ID to which the irq/event is being
+ *			requested for.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_free_irq(const struct ti_sci_handle *handle, u32 valid_params,
+			   u16 src_id, u16 src_index, u16 dst_id,
+			   u16 dst_host_irq, u16 ia_id, u16 vint,
+			   u16 global_event, u8 vint_status_bit, u8 s_host)
+{
+	pr_debug("%s: IRQ release with valid_params = 0x%x from src = %d, index = %d, to dst = %d, irq = %d,via ia_id = %d, vint = %d, global event = %d,status_bit = %d\n",
+		 __func__, valid_params, src_id, src_index,
+		 dst_id, dst_host_irq, ia_id, vint, global_event,
+		 vint_status_bit);
+
+	return ti_sci_manage_irq(handle, valid_params, src_id, src_index,
+				 dst_id, dst_host_irq, ia_id, vint,
+				 global_event, vint_status_bit, s_host,
+				 TI_SCI_MSG_FREE_IRQ);
+}
+
+/**
+ * ti_sci_cmd_set_irq() - Configure a host irq route between the requested
+ *			  source and destination.
+ * @handle:		Pointer to TISCI handle.
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @dst_id:		Device ID of the IRQ destination
+ * @dst_host_irq:	IRQ number of the destination device
+ * @vint_irq:		Boolean specifying if this interrupt belongs to
+ *			Interrupt Aggregator.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_set_irq(const struct ti_sci_handle *handle, u16 src_id,
+			      u16 src_index, u16 dst_id, u16 dst_host_irq)
+{
+	u32 valid_params = MSG_FLAG_DST_ID_VALID | MSG_FLAG_DST_HOST_IRQ_VALID;
+
+	return ti_sci_set_irq(handle, valid_params, src_id, src_index, dst_id,
+			      dst_host_irq, 0, 0, 0, 0, 0);
+}
+
+/**
+ * ti_sci_cmd_set_event_map() - Configure an event based irq route between the
+ *				requested source and Interrupt Aggregator.
+ * @handle:		Pointer to TISCI handle.
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @ia_id:		Device ID of the IA, if the IRQ flows through this IA
+ * @vint:		Virtual interrupt to be used within the IA
+ * @global_event:	Global event number to be used for the requesting event
+ * @vint_status_bit:	Virtual interrupt status bit to be used for the event
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_set_event_map(const struct ti_sci_handle *handle,
+				    u16 src_id, u16 src_index, u16 ia_id,
+				    u16 vint, u16 global_event,
+				    u8 vint_status_bit)
+{
+	u32 valid_params = MSG_FLAG_IA_ID_VALID | MSG_FLAG_VINT_VALID |
+			   MSG_FLAG_GLB_EVNT_VALID |
+			   MSG_FLAG_VINT_STS_BIT_VALID;
+
+	return ti_sci_set_irq(handle, valid_params, src_id, src_index, 0, 0,
+			      ia_id, vint, global_event, vint_status_bit, 0);
+}
+
+/**
+ * ti_sci_cmd_free_irq() - Free a host irq route between the between the
+ *			   requested source and destination.
+ * @handle:		Pointer to TISCI handle.
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @dst_id:		Device ID of the IRQ destination
+ * @dst_host_irq:	IRQ number of the destination device
+ * @vint_irq:		Boolean specifying if this interrupt belongs to
+ *			Interrupt Aggregator.