diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 0958e97..3f9a791 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -464,9 +464,25 @@ section Linus Computer Science 101. Nuff said. If your code deviates too much from this, it is likely to be rejected without further review, and without comment. +Once significant exception is when moving code from one file to +another in this case you should not modify the moved code at all in +the same patch which moves it. This clearly delineates the act of +moving the code and your changes. This greatly aids review of the +actual differences and allows tools to better track the history of +the code itself. + Check your patches with the patch style checker prior to submission -(scripts/checkpatch.pl). You should be able to justify all -violations that remain in your patch. +(scripts/checkpatch.pl). The style checker should be viewed as +a guide not as the final word. If your code looks better with +a violation then its probably best left alone. + +The checker reports at three levels: + - ERROR: things that are very likely to be wrong + - WARNING: things requiring careful review + - CHECK: things requiring thought + +You should be able to justify all violations that remain in your +patch. diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 277c326..25e20a2 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -9,7 +9,7 @@ use strict; my $P = $0; $P =~ s@.*/@@g; -my $V = '0.06'; +my $V = '0.07'; use Getopt::Long qw(:config no_auto_abbrev); @@ -246,6 +246,19 @@ sub cat_vet { return $vet; } +sub ERROR { + print "ERROR: $_[0]\n"; + our $clean = 0; +} +sub WARN { + print "WARNING: $_[0]\n"; + our $clean = 0; +} +sub CHK { + print "CHECK: $_[0]\n"; + our $clean = 0; +} + sub process { my $filename = shift; my @lines = @_; @@ -259,7 +272,7 @@ sub process { my $previndent=0; my $stashindent=0; - my $clean = 1; + our $clean = 1; my $signoff = 0; my $is_patch = 0; @@ -290,8 +303,11 @@ sub process { long\s+int| long\s+long| long\s+long\s+int| + u8|u16|u32|u64| + s8|s16|s32|s64| struct\s+$Ident| union\s+$Ident| + enum\s+$Ident| ${Ident}_t ) (?:\s+$Sparse)* @@ -304,6 +320,23 @@ sub process { my $Declare = qr{(?:$Storage\s+)?$Type}; my $Attribute = qr{__read_mostly|__init|__initdata}; + # Pre-scan the patch looking for any __setup documentation. + my @setup_docs = (); + my $setup_docs = 0; + foreach my $line (@lines) { + if ($line=~/^\+\+\+\s+(\S+)/) { + $setup_docs = 0; + if ($1 =~ m@Documentation/kernel-parameters.txt$@) { + $setup_docs = 1; + } + next; + } + + if ($setup_docs && $line =~ /^\+/) { + push(@setup_docs, $line); + } + } + foreach my $line (@lines) { $linenr++; @@ -369,30 +402,42 @@ sub process { $here .= "FILE: $realfile:$realline:" if ($realcnt != 0); my $hereline = "$here\n$line\n"; - my $herecurr = "$here\n$line\n\n"; - my $hereprev = "$here\n$prevline\n$line\n\n"; + my $herecurr = "$here\n$line\n"; + my $hereprev = "$here\n$prevline\n$line\n"; #check the patch for a signoff: if ($line =~ /^\s*signed-off-by:/i) { # This is a signoff, if ugly, so do not double report. $signoff++; if (!($line =~ /^\s*Signed-off-by:/)) { - print "Signed-off-by: is the preferred form\n"; - print "$herecurr"; - $clean = 0; + WARN("Signed-off-by: is the preferred form\n" . + $herecurr); } if ($line =~ /^\s*signed-off-by:\S/i) { - print "need space after Signed-off-by:\n"; - print "$herecurr"; - $clean = 0; + WARN("need space after Signed-off-by:\n" . + $herecurr); } } # Check for wrappage within a valid hunk of the file if ($realcnt != 0 && $line !~ m{^(?:\+|-| |$)}) { - print "patch seems to be corrupt (line wrapped?) [$realcnt]\n"; - print "$herecurr"; - $clean = 0; + ERROR("patch seems to be corrupt (line wrapped?)\n" . + $herecurr); + } + +# UTF-8 regex found at http://www.w3.org/International/questions/qa-forms-utf-8.en.php + if (($realfile =~ /^$/ || $line =~ /^\+/) && + !($line =~ m/^( + [\x09\x0A\x0D\x20-\x7E] # ASCII + | [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte + | \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs + | [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte + | \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates + | \xF0[\x90-\xBF][\x80-\xBF]{2} # planes 1-3 + | [\xF1-\xF3][\x80-\xBF]{3} # planes 4-15 + | \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16 + )*$/x )) { + ERROR("Invalid UTF-8\n" . $herecurr); } #ignore lines being removed @@ -403,16 +448,12 @@ sub process { #trailing whitespace if ($line =~ /^\+.*\S\s+$/ || $line =~ /^\+\s+$/) { - my $herevet = "$here\n" . cat_vet($line) . "\n\n"; - print "trailing whitespace\n"; - print "$herevet"; - $clean = 0; + my $herevet = "$here\n" . cat_vet($line) . "\n"; + ERROR("trailing whitespace\n" . $herevet); } #80 column limit if ($line =~ /^\+/ && !($prevline=~/\/\*\*/) && $length > 80) { - print "line over 80 characters\n"; - print "$herecurr"; - $clean = 0; + WARN("line over 80 characters\n" . $herecurr); } # check we are in a valid source file *.[hc] if not then ignore this hunk @@ -421,10 +462,8 @@ sub process { # at the beginning of a line any tabs must come first and anything # more than 8 must use tabs. if ($line=~/^\+\s* \t\s*\S/ or $line=~/^\+\s* \s*/) { - my $herevet = "$here\n" . cat_vet($line) . "\n\n"; - print "use tabs not spaces\n"; - print "$herevet"; - $clean = 0; + my $herevet = "$here\n" . cat_vet($line) . "\n"; + ERROR("use tabs not spaces\n" . $herevet); } # @@ -463,9 +502,27 @@ sub process { } } if ($err ne '') { - print "switch and case should be at the same indent\n"; - print "$here\n$line\n$err\n"; - $clean = 0; + ERROR("switch and case should be at the same indent\n$hereline\n$err\n"); + } + } + +# if/while/etc brace do not go on next line, unless defining a do while loop, +# or if that brace on the next line is for something else + if ($line =~ /\b(?:(if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) { + my @ctx = ctx_statement($linenr, $realcnt); + my $ctx_ln = $linenr + $#ctx + 1; + my $ctx_cnt = $realcnt - $#ctx - 1; + my $ctx = join("\n", @ctx); + + while ($ctx_cnt > 0 && $lines[$ctx_ln - 1] =~ /^-/) { + $ctx_ln++; + $ctx_cnt--; + } + ##warn "line<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>"; + + if ($ctx !~ /{\s*/ && $ctx_cnt > 0 && $lines[$ctx_ln - 1] =~ /^\+\s*{/) { + ERROR("That { should be on the previous line\n" . + "$here\n$ctx\n$lines[$ctx_ln - 1]"); } } @@ -474,9 +531,7 @@ sub process { # TEST: allow direct testing of the type matcher. if ($tst_type && $line =~ /^.$Declare$/) { - print "TEST: is type $Declare\n"; - print "$herecurr"; - $clean = 0; + ERROR("TEST: is type $Declare\n" . $herecurr); next; } @@ -488,9 +543,8 @@ sub process { if ($rawline =~ m{^.#\s*include\s+[<"](.*)[">]}) { my $path = $1; if ($path =~ m{//}) { - print "malformed #include filename\n"; - print "$herecurr"; - $clean = 0; + ERROR("malformed #include filename\n" . + $herecurr); } # Sanitise this special form of string. $path = 'X' x length($path); @@ -499,9 +553,7 @@ sub process { # no C99 // comments if ($line =~ m{//}) { - print "do not use C99 // comments\n"; - print "$herecurr"; - $clean = 0; + ERROR("do not use C99 // comments\n" . $herecurr); } # Remove C99 comments. $line =~ s@//.*@@; @@ -514,49 +566,40 @@ sub process { ($prevline !~ /^\+}/) && ($prevline !~ /^ }/) && ($prevline !~ /\s$name(?:\s+$Attribute)?\s*(?:;|=)/)) { - print "EXPORT_SYMBOL(foo); should immediately follow its function/variable\n"; - print "$herecurr"; - $clean = 0; + WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr); } } # check for static initialisers. if ($line=~/\s*static\s.*=\s+(0|NULL);/) { - print "do not initialise statics to 0 or NULL\n"; - print "$herecurr"; - $clean = 0; + ERROR("do not initialise statics to 0 or NULL\n" . + $herecurr); } # check for new typedefs, only function parameters and sparse annotations # make sense. if ($line =~ /\btypedef\s/ && - $line !~ /\btypedef\s+$Type\s+\(\s*$Ident\s*\)\s*\(/ && + $line !~ /\btypedef\s+$Type\s+\(\s*\*$Ident\s*\)\s*\(/ && $line !~ /\b__bitwise(?:__|)\b/) { - print "do not add new typedefs\n"; - print "$herecurr"; - $clean = 0; + WARN("do not add new typedefs\n" . $herecurr); } # * goes on variable not on type if ($line =~ m{\($NonptrType(\*+)(?:\s+const)?\)}) { - print "\"(foo$1)\" should be \"(foo $1)\"\n"; - print "$herecurr"; - $clean = 0; + ERROR("\"(foo$1)\" should be \"(foo $1)\"\n" . + $herecurr); } elsif ($line =~ m{\($NonptrType\s+(\*+)(?!\s+const)\s+\)}) { - print "\"(foo $1 )\" should be \"(foo $1)\"\n"; - print "$herecurr"; - $clean = 0; + ERROR("\"(foo $1 )\" should be \"(foo $1)\"\n" . + $herecurr); } elsif ($line =~ m{$NonptrType(\*+)(?:\s+const)?\s+[A-Za-z\d_]+}) { - print "\"foo$1 bar\" should be \"foo $1bar\"\n"; - print "$herecurr"; - $clean = 0; + ERROR("\"foo$1 bar\" should be \"foo $1bar\"\n" . + $herecurr); } elsif ($line =~ m{$NonptrType\s+(\*+)(?!\s+const)\s+[A-Za-z\d_]+}) { - print "\"foo $1 bar\" should be \"foo $1bar\"\n"; - print "$herecurr"; - $clean = 0; + ERROR("\"foo $1 bar\" should be \"foo $1bar\"\n" . + $herecurr); } # # no BUG() or BUG_ON() @@ -585,9 +628,7 @@ sub process { } } if ($ok == 0) { - print "printk() should include KERN_ facility level\n"; - print "$herecurr"; - $clean = 0; + WARN("printk() should include KERN_ facility level\n" . $herecurr); } } @@ -595,9 +636,7 @@ sub process { # or if closed on same line if (($line=~/$Type\s*[A-Za-z\d_]+\(.*\).* {/) and !($line=~/\#define.*do\s{/) and !($line=~/}/)) { - print "braces following function declarations go on the next line\n"; - print "$herecurr"; - $clean = 0; + ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr); } # Check operator spacing. @@ -633,27 +672,27 @@ sub process { } # Pick up the preceeding and succeeding characters. - my $ca = substr($opline, $off - 1, 1); + my $ca = substr($opline, 0, $off); my $cc = ''; if (length($opline) >= ($off + length($elements[$n + 1]))) { $cc = substr($opline, $off + length($elements[$n + 1])); } + my $cb = "$ca$;$cc"; my $ctx = "${a}x${c}"; my $at = "(ctx:$ctx)"; my $ptr = (" " x $off) . "^"; - my $hereptr = "$hereline$ptr\n\n"; + my $hereptr = "$hereline$ptr\n"; ##print "<$s1:$op:$s2> <$elements[$n]:$elements[$n + 1]:$elements[$n + 2]>\n"; # ; should have either the end of line or a space or \ after it if ($op eq ';') { - if ($ctx !~ /.x[WE]/ && $cc !~ /^\\/) { - print "need space after that '$op' $at\n"; - print "$hereptr"; - $clean = 0; + if ($ctx !~ /.x[WEB]/ && $cc !~ /^\\/ && + $cc !~ /^;/) { + ERROR("need space after that '$op' $at\n" . $hereptr); } # // is a comment @@ -662,43 +701,31 @@ sub process { # -> should have no spaces } elsif ($op eq '->') { if ($ctx =~ /Wx.|.xW/) { - print "no spaces around that '$op' $at\n"; - print "$hereptr"; - $clean = 0; + ERROR("no spaces around that '$op' $at\n" . $hereptr); } # , must have a space on the right. } elsif ($op eq ',') { if ($ctx !~ /.xW|.xE/ && $cc !~ /^}/) { - print "need space after that '$op' $at\n"; - print "$hereptr"; - $clean = 0; + ERROR("need space after that '$op' $at\n" . $hereptr); } # unary ! and unary ~ are allowed no space on the right } elsif ($op eq '!' or $op eq '~') { if ($ctx !~ /[WOEB]x./) { - print "need space before that '$op' $at\n"; - print "$hereptr"; - $clean = 0; + ERROR("need space before that '$op' $at\n" . $hereptr); } if ($ctx =~ /.xW/) { - print "no space after that '$op' $at\n"; - print "$hereptr"; - $clean = 0; + ERROR("no space after that '$op' $at\n" . $hereptr); } # unary ++ and unary -- are allowed no space on one side. } elsif ($op eq '++' or $op eq '--') { if ($ctx !~ /[WOB]x[^W]/ && $ctx !~ /[^W]x[WOBE]/) { - print "need space one side of that '$op' $at\n"; - print "$hereptr"; - $clean = 0; + ERROR("need space one side of that '$op' $at\n" . $hereptr); } if ($ctx =~ /Wx./ && $cc =~ /^;/) { - print "no space before that '$op' $at\n"; - print "$hereptr"; - $clean = 0; + ERROR("no space before that '$op' $at\n" . $hereptr); } # & is both unary and binary @@ -715,9 +742,7 @@ sub process { # } elsif ($op eq '&' or $op eq '-') { if ($ctx !~ /VxV|[EW]x[WE]|[EWB]x[VO]/) { - print "need space before that '$op' $at\n"; - print "$hereptr"; - $clean = 0; + ERROR("need space before that '$op' $at\n" . $hereptr); } # * is the same as & only adding: @@ -726,16 +751,9 @@ sub process { # (foo **) # } elsif ($op eq '*') { - if ($ca eq '*') { - if ($cc =~ /^\s(?!\s*const)/) { - print "no space after that '$op' $at\n"; - print "$hereptr"; - $clean = 0; - } - } elsif ($ctx !~ /VxV|[EW]x[WE]|[EWB]x[VO]|OxV|WxB|BxB/) { - print "need space before that '$op' $at\n"; - print "$hereptr"; - $clean = 0; + if ($ca !~ /$Type$/ && $cb !~ /(\*$;|$;\*)/ && + $ctx !~ /VxV|[EW]x[WE]|[EWB]x[VO]|OxV|WxB|BxB/) { + ERROR("need space before that '$op' $at\n" . $hereptr); } # << and >> may either have or not have spaces both sides @@ -743,58 +761,51 @@ sub process { $op eq '^' or $op eq '|') { if ($ctx !~ /VxV|WxW|VxE|WxE/) { - print "need consistent spacing around '$op' $at\n"; - print "$hereptr"; - $clean = 0; + ERROR("need consistent spacing around '$op' $at\n" . + $hereptr); } # All the others need spaces both sides. } elsif ($ctx !~ /[EW]x[WE]/) { - print "need spaces around that '$op' $at\n"; - print "$hereptr"; - $clean = 0; + ERROR("need spaces around that '$op' $at\n" . $hereptr); } $off += length($elements[$n + 1]); } } #need space before brace following if, while, etc - if ($line=~/\(.*\){/) { - print "need a space before the brace\n"; - print "$herecurr"; - $clean = 0; + if ($line =~ /\(.*\){/ || $line =~ /do{/) { + ERROR("need a space before the open brace '{'\n" . $herecurr); + } + +# closing brace should have a space following it when it has anything +# on the line + if ($line =~ /}(?!(?:,|;|\)))\S/) { + ERROR("need a space after that close brace '}'\n" . $herecurr); } #goto labels aren't indented, allow a single space however if ($line=~/^.\s+[A-Za-z\d_]+:(?![0-9]+)/ and !($line=~/^. [A-Za-z\d_]+:/) and !($line=~/^.\s+default:/)) { - print "labels should not be indented\n"; - print "$herecurr"; - $clean = 0; + WARN("labels should not be indented\n" . $herecurr); } # Need a space before open parenthesis after if, while etc if ($line=~/\b(if|while|for|switch)\(/) { - print "need a space before the open parenthesis\n"; - print "$herecurr"; - $clean = 0; + ERROR("need a space before the open parenthesis '('\n" . $herecurr); } # Check for illegal assignment in if conditional. if ($line=~/\bif\s*\(.*[^<>!=]=[^=].*\)/) { #next if ($line=~/\".*\Q$op\E.*\"/ or $line=~/\'\Q$op\E\'/); - print "do not use assignment in if condition\n"; - print "$herecurr"; - $clean = 0; + ERROR("do not use assignment in if condition\n" . $herecurr); } # Check for }else {, these must be at the same # indent level to be relevant to each other. if ($prevline=~/}\s*$/ and $line=~/^.\s*else\s*/ and $previndent == $indent) { - print "else should follow close brace\n"; - print "$hereprev"; - $clean = 0; + ERROR("else should follow close brace '}'\n" . $hereprev); } #studly caps, commented out until figure out how to distinguish between use of existing and adding new @@ -806,57 +817,22 @@ sub process { #no spaces allowed after \ in define if ($line=~/\#define.*\\\s$/) { - print("Whitepspace after \\ makes next lines useless\n"); - print "$herecurr"; - $clean = 0; + WARN("Whitepspace after \\ makes next lines useless\n" . $herecurr); } #warn if is #included and is available (uses RAW line) if ($tree && $rawline =~ m{^.\#\s*include\s*\}) { my $checkfile = "include/linux/$1.h"; if (-f $checkfile) { - print "Use #include instead of \n"; - print $herecurr; - $clean = 0; - } - } - -# if/while/etc brace do not go on next line, unless defining a do while loop, -# or if that brace on the next line is for something else - if ($prevline=~/\b(?:(if|while|for|switch)\s*\(|do\b|else\b)/) { - my @opened = $prevline=~/\(/g; - my @closed = $prevline=~/\)/g; - my $nr_line = $linenr; - my $remaining = $realcnt - 1; - my $next_line = $line; - my $extra_lines = 0; - my $display_segment = $prevline; - - while ($remaining > 0 && scalar @opened > scalar @closed) { - $prevline .= $next_line; - $display_segment .= "\n" . $next_line; - $next_line = $lines[$nr_line]; - $nr_line++; - $remaining--; - - @opened = $prevline=~/\(/g; - @closed = $prevline=~/\)/g; - } - - if (($prevline=~/\b(?:(if|while|for|switch)\s*\(.*\)|do|else)\s*$/) and ($next_line=~/{/) and - !($next_line=~/\b(?:if|while|for|switch|do|else)\b/) and !($next_line=~/\#define.*do.*while/)) { - print "That { should be on the previous line\n"; - print "$here\n$display_segment\n$next_line\n\n"; - $clean = 0; + CHK("Use #include instead of \n" . + $herecurr); } } # if and else should not have general statements after it if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/ && - $1 !~ /^\s*(?:\sif|{|$)/) { - print "trailing statements should be on next line\n"; - print "$herecurr"; - $clean = 0; + $1 !~ /^\s*(?:\sif|{|\\|$)/) { + ERROR("trailing statements should be on next line\n" . $herecurr); } # multi-statement macros should be enclosed in a do while loop, grab the @@ -877,49 +853,49 @@ sub process { $ln--; $cnt++; } - my $ctx = join('', ctx_statement($ln, $cnt)); + my @ctx = ctx_statement($ln, $cnt); + my $ctx_ln = $ln + $#ctx + 1; + my $ctx = join("\n", @ctx); + + # Pull in any empty extension lines. + while ($ctx =~ /\\$/ && + $lines[$ctx_ln - 1] =~ /^.\s*(?:\\)?$/) { + $ctx .= $lines[$ctx_ln - 1]; + $ctx_ln++; + } if ($ctx =~ /\\$/) { if ($ctx =~ /;/) { - print "Macros with multiple statements should be enclosed in a do - while loop\n"; + ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n"); } else { - print "Macros with complex values should be enclosed in parenthesis\n"; + ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n"); } - print "$hereprev"; - $clean = 0; } } # don't include deprecated include files (uses RAW line) for my $inc (@dep_includes) { if ($rawline =~ m@\#\s*include\s*\<$inc>@) { - print "Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n"; - print "$herecurr"; - $clean = 0; + ERROR("Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr); } } # don't use deprecated functions for my $func (@dep_functions) { if ($line =~ /\b$func\b/) { - print "Don't use $func(): see Documentation/feature-removal-schedule.txt\n"; - print "$herecurr"; - $clean = 0; + ERROR("Don't use $func(): see Documentation/feature-removal-schedule.txt\n" . $herecurr); } } # no volatiles please if ($line =~ /\bvolatile\b/ && $line !~ /\basm\s+volatile\b/) { - print "Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt\n"; - print "$herecurr"; - $clean = 0; + WARN("Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt\n" . $herecurr); } # warn about #if 0 if ($line =~ /^.#\s*if\s+0\b/) { - print "#if 0 -- if this code redundant remove it\n"; - print "$herecurr"; - $clean = 0; + CHK("if this code is redundant consider removing it\n" . + $herecurr); } # warn about #ifdefs in C files @@ -933,41 +909,47 @@ sub process { if ($line =~ /^.\s*(struct\s+mutex|spinlock_t)\s+\S+;/) { my $which = $1; if (!ctx_has_comment($first_line, $linenr)) { - print "$1 definition without comment\n"; - print "$herecurr"; - $clean = 0; + CHK("$1 definition without comment\n" . $herecurr); } } # check for memory barriers without a comment. if ($line =~ /\b(mb|rmb|wmb|read_barrier_depends|smp_mb|smp_rmb|smp_wmb|smp_read_barrier_depends)\(/) { if (!ctx_has_comment($first_line, $linenr)) { - print "memory barrier without comment\n"; - print "$herecurr"; - $clean = 0; + CHK("memory barrier without comment\n" . $herecurr); } } # check of hardware specific defines if ($line =~ m@^.#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@) { - print "architecture specific defines should be avoided\n"; - print "$herecurr"; - $clean = 0; + CHK("architecture specific defines should be avoided\n" . $herecurr); } +# check the location of the inline attribute, that it is between +# storage class and type. if ($line =~ /$Type\s+(?:inline|__always_inline)\b/ || $line =~ /\b(?:inline|always_inline)\s+$Storage/) { - print "inline keyword should sit between storage class and type\n"; - print "$herecurr"; - $clean = 0; + ERROR("inline keyword should sit between storage class and type\n" . $herecurr); + } + +# check for new externs in .c files. + if ($line =~ /^.\s*extern\s/ && ($realfile =~ /\.c$/)) { + WARN("externs should be avoided in .c files\n" . $herecurr); + } + +# checks for new __setup's + if ($rawline =~ /\b__setup\("([^"]*)"/) { + my $name = $1; + + if (!grep(/$name/, @setup_docs)) { + CHK("__setup appears un-documented -- check Documentation/kernel-parameters.txt\n" . $herecurr); + } } } if ($chk_patch && !$is_patch) { - $clean = 0; - print "Does not appear to be a unified-diff format patch\n"; + ERROR("Does not appear to be a unified-diff format patch\n"); } if ($is_patch && $chk_signoff && $signoff == 0) { - $clean = 0; - print "Missing Signed-off-by: line(s)\n"; + ERROR("Missing Signed-off-by: line(s)\n"); } if ($clean == 1 && $quiet == 0) {