Merge tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

dee02770 · Linus Torvalds <[email protected]> · 2017-11-13 10:17:35 -08:00

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Introduce host claiming by context to support blkmq
   - Preparations for enabling CQE (eMMC CMDQ) requests
   - Re-factorizations to prepare for blkmq support
   - Re-factorizations to prepare for CQE support
   - Fix signal voltage switch for SD cards without power cycle
   - Convert RPMB to a character device
   - Export eMMC revision via sysfs
   - Support eMMC DT binding for fixed driver type
   - Document mmc_regulator_get_supply() API

 MMC host:
   - omap_hsmmc: Updated regulator management for PBIAS
   - sdhci-omap: Add new OMAP SDHCI driver
   - meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs
   - sdhci-pci: Add support for Intel CDF
   - sdhci-acpi: Fix voltage switch for some Intel host controllers
   - sdhci-msm: Enable delay circuit calibration clocks
   - sdhci-msm: Manage power IRQ properly
   - mediatek: Add support of mt2701/mt2712
   - mediatek: Updates management of clocks and tunings
   - mediatek: Upgrade eMMC HS400 support
   - rtsx_pci: Update tuning for gen3 PCI-Express
   - renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings
   - Catch all errors when getting regulators
   - Various additional improvements and cleanups"

* tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits)
  sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attribute
  dt-bindings: sdhci-fujitsu: document cmd-dat-delay property
  mmc: tmio: Replace msleep() of 20ms or less with usleep_range()
  mmc: dw_mmc: Convert timers to use timer_setup()
  mmc: dw_mmc: Cleanup the DTO timer like the CTO one
  mmc: vub300: Use common code in __download_offload_pseudocode()
  mmc: tmio: Use common error handling code in tmio_mmc_host_probe()
  mmc: Convert timers to use timer_setup()
  mmc: sdhci-acpi: Fix voltage switch for some Intel host controllers
  mmc: sdhci-acpi: Let devices define their own private data
  mmc: mediatek: perfer to use rise edge latching for cmd line
  mmc: mediatek: improve eMMC hs400 mode read performance
  mmc: mediatek: add latch-ck support
  mmc: mediatek: add support of source_cg clock
  mmc: mediatek: add stop_clk fix and enhance_rx support
  mmc: mediatek: add busy_check support
  mmc: mediatek: add async fifo and data tune support
  mmc: mediatek: add pad_tune0 support
  mmc: mediatek: make hs400_tune_response only for mt8173
  arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes
  ...

Commit: dee02770cdcd8bc06a48c917ce5df2fb56cf6059
Parents: e4a8ca3b · 06641e8d

Merge commit. Changes below are compared with the first parent: e4a8ca3b.

Changes

66 files changed · +3256 −581

File	Status	Add	Del	Content
Documentation/ABI/testing/sysfs-bus-mmc	added	+4	−0	View file
Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt	added	+54	−0	View file
Documentation/devicetree/bindings/mmc/mmc.txt	modified	+3	−0	View file
Documentation/devicetree/bindings/mmc/mtk-sd.txt	modified	+15	−3	View file
Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt	modified	+2	−0	View file
Documentation/devicetree/bindings/mmc/sdhci-msm.txt	modified	+2	−0	View file
Documentation/devicetree/bindings/mmc/sdhci-omap.txt	added	+16	−0	View file
Documentation/devicetree/bindings/mmc/tmio_mmc.txt	modified	+69	−1	View file
MAINTAINERS	modified	+6	−0	View file
arch/arm64/boot/dts/mediatek/mt8173.dtsi	modified	+4	−8	View file
drivers/mmc/core/block.c	modified	+299	−47	View file
drivers/mmc/core/bus.c	modified	+7	−0	View file
drivers/mmc/core/core.c	modified	+235	−27	View file
drivers/mmc/core/core.h	modified	+12	−4	View file
drivers/mmc/core/host.c	modified	+13	−7	View file
drivers/mmc/core/host.h	modified	+6	−1	View file
drivers/mmc/core/mmc.c	modified	+41	−5	View file
drivers/mmc/core/mmc_ops.c	modified	+2	−4	View file
drivers/mmc/core/queue.c	modified	+25	−16	View file
drivers/mmc/core/queue.h	modified	+2	−2	View file
drivers/mmc/core/sd.c	modified	+47	−4	View file
drivers/mmc/core/sdio_irq.c	modified	+2	−1	View file
drivers/mmc/host/Kconfig	modified	+27	−1	View file
drivers/mmc/host/Makefile	modified	+2	−0	View file
drivers/mmc/host/atmel-mci.c	modified	+6	−7	View file
drivers/mmc/host/cavium.c	modified	+1	−1	View file
drivers/mmc/host/dw_mmc-k3.c	modified	+1	−1	View file
drivers/mmc/host/dw_mmc.c	modified	+64	−20	View file
drivers/mmc/host/dw_mmc.h	modified	+2	−1	View file
drivers/mmc/host/jz4740_mmc.c	modified	+3	−4	View file
drivers/mmc/host/meson-gx-mmc.c	modified	+1	−1	View file
drivers/mmc/host/meson-mx-sdio.c	added	+768	−0	View file
drivers/mmc/host/mmci.c	modified	+1	−1	View file
drivers/mmc/host/mtk-sd.c	modified	+247	−38	View file
drivers/mmc/host/mvsdio.c	modified	+3	−3	View file
drivers/mmc/host/mxcmmc.c	modified	+4	−7	View file
drivers/mmc/host/omap.c	modified	+9	−11	View file
drivers/mmc/host/omap_hsmmc.c	modified	+9	−26	View file
drivers/mmc/host/renesas_sdhi_internal_dmac.c	modified	+1	−0	View file
drivers/mmc/host/renesas_sdhi_sys_dmac.c	modified	+4	−1	View file
drivers/mmc/host/rtsx_pci_sdmmc.c	modified	+18	−20	View file
drivers/mmc/host/sdhci-acpi.c	modified	+129	−45	View file
drivers/mmc/host/sdhci-cadence.c	modified	+14	−14	View file
drivers/mmc/host/sdhci-msm.c	modified	+275	−51	View file
drivers/mmc/host/sdhci-of-at91.c	modified	+2	−1	View file
drivers/mmc/host/sdhci-of-esdhc.c	modified	+30	−28	View file
drivers/mmc/host/sdhci-omap.c	added	+607	−0	View file
drivers/mmc/host/sdhci-pci-core.c	modified	+1	−10	View file
drivers/mmc/host/sdhci-pci-o2micro.c	modified	+34	−1	View file
drivers/mmc/host/sdhci-pci-o2micro.h	deleted	+0	−73	View before deletion
drivers/mmc/host/sdhci-pci.h	modified	+13	−0	View file
drivers/mmc/host/sdhci-s3c.c	modified	+5	−13	View file
drivers/mmc/host/sdhci-tegra.c	modified	+9	−1	View file
drivers/mmc/host/sdhci.c	modified	+7	−8	View file
drivers/mmc/host/sdhci_f_sdh30.c	modified	+14	−0	View file
drivers/mmc/host/sunxi-mmc.c	modified	+1	−4	View file
drivers/mmc/host/tifm_sd.c	modified	+3	−3	View file
drivers/mmc/host/tmio_mmc_core.c	modified	+20	−16	View file
drivers/mmc/host/usdhi6rol0.c	modified	+1	−1	View file
drivers/mmc/host/via-sdmmc.c	modified	+3	−5	View file
drivers/mmc/host/vub300.c	modified	+19	−22	View file
drivers/mmc/host/wbsd.c	modified	+3	−5	View file
drivers/regulator/pbias-regulator.c	modified	+18	−3	View file
include/linux/mfd/rtsx_pci.h	modified	+1	−0	View file
include/linux/mmc/host.h	modified	+10	−1	View file
include/linux/mmc/sdhci-pci-data.h	modified	+0	−3	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/ABI/testing/sysfs-bus-mmc

View file

diff --git a/Documentation/ABI/testing/sysfs-bus-mmc b/Documentation/ABI/testing/sysfs-bus-mmc
new file mode 100644
index 0000000..519f028
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-mmc
@@ -0,0 +1,4 @@
+What:		/sys/bus/mmc/devices/.../rev
+Date:		October 2017
+Contact:	Jin Qian <[email protected]>
+Description:	Extended CSD revision number

Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt
new file mode 100644
index 0000000..8765c60
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt
@@ -0,0 +1,54 @@
+* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller
+
+The highspeed MMC host controller on Amlogic SoCs provides an interface
+for MMC, SD, SDIO and SDHC types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.41 as well
+as the speed of SD standard 2.0.
+
+The hardware provides an internal "mux" which allows up to three slots
+to be controlled. Only one slot can be accessed at a time.
+
+Required properties:
+ - compatible : must be one of
+	- "amlogic,meson8-sdio"
+	- "amlogic,meson8b-sdio"
+	along with the generic "amlogic,meson-mx-sdio"
+ - reg : mmc controller base registers
+ - interrupts : mmc controller interrupt
+ - #address-cells : must be 1
+ - size-cells : must be 0
+ - clocks : phandle to clock providers
+ - clock-names : must contain "core" and "clkin"
+
+Required child nodes:
+A node for each slot provided by the MMC controller is required.
+NOTE: due to a driver limitation currently only one slot (= child node)
+      is supported!
+
+Required properties on each child node (= slot):
+ - compatible : must be "mmc-slot" (see mmc.txt within this directory)
+ - reg : the slot (or "port") ID
+
+Optional properties on each child node (= slot):
+ - bus-width : must be 1 or 4 (8-bit bus is not supported)
+ - for cd and all other additional generic mmc parameters
+   please refer to mmc.txt within this directory
+
+Examples:
+	mmc@c1108c20 {
+		compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+		reg = <0xc1108c20 0x20>;
+		interrupts = <0 28 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+		clock-names = "core", "clkin";
+
+		slot@1 {
+			compatible = "mmc-slot";
+			reg = <1>;
+
+			bus-width = <4>;
+		};
+	};

Documentation/devicetree/bindings/mmc/mmc.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index b32ade6..94a90b4 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -53,6 +53,9 @@ Optional properties:
 - no-sdio: controller is limited to send sdio cmd during initialization
 - no-sd: controller is limited to send sd cmd during initialization
 - no-mmc: controller is limited to send mmc cmd during initialization
+- fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type.
+  The value <n> is the driver type as specified in the eMMC specification
+  (table 206 in spec version 5.1).
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"

Documentation/devicetree/bindings/mmc/mtk-sd.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 4182ea3..72d2a73 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -7,10 +7,18 @@ This file documents differences between the core properties in mmc.txt
 and the properties used by the msdc driver.
 
 Required properties:
-- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
+- compatible: value should be either of the following.
+	"mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
+	"mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
+	"mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
+	"mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
+- reg: physical base address of the controller and length
 - interrupts: Should contain MSDC interrupt number
-- clocks: MSDC source clock, HCLK
-- clock-names: "source", "hclk"
+- clocks: Should contain phandle for the clock feeding the MMC controller
+- clock-names: Should contain the following:
+	"source" - source clock (required)
+	"hclk" - HCLK which used for host (required)
+	"source_cg" - independent source clock gate (required for MT2712)
 - pinctrl-names: should be "default", "state_uhs"
 - pinctrl-0: should contain default/high speed pin ctrl
 - pinctrl-1: should contain uhs mode pin ctrl
@@ -30,6 +38,10 @@ Optional properties:
 - mediatek,hs400-cmd-resp-sel-rising:  HS400 command response sample selection
 				       If present,HS400 command responses are sampled on rising edges.
 				       If not present,HS400 command responses are sampled on falling edges.
+- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
+		     error caused by stop clock(fifo full)
+		     Valid range = [0:0x7]. if not present, default value is 0.
+		     applied to compatible "mediatek,mt2701-mmc".
 
 Examples:
 mmc0: mmc@11230000 {

Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
index de2c53c..3ee9263 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
@@ -15,6 +15,8 @@ Required properties:
 Optional properties:
 - vqmmc-supply: phandle to the regulator device tree node, mentioned
   as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
+  requires the CMD_DAT_DELAY control to be enabled.
 
 Example:
 

Documentation/devicetree/bindings/mmc/sdhci-msm.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 0576264..bfdcdc4 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -18,6 +18,8 @@ Required properties:
 	"core"	- SDC MMC clock (MCLK) (required)
 	"bus"	- SDCC bus voter clock (optional)
 	"xo"	- TCXO clock (optional)
+	"cal"	- reference clock for RCLK delay calibration (optional)
+	"sleep"	- sleep clock for RCLK delay calibration (optional)
 
 Example:
 

Documentation/devicetree/bindings/mmc/sdhci-omap.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
new file mode 100644
index 0000000..51775a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
@@ -0,0 +1,16 @@
+* TI OMAP SDHCI Controller
+
+Refer to mmc.txt for standard MMC bindings.
+
+Required properties:
+- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
+- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
+
+Example:
+	mmc1: mmc@4809c000 {
+		compatible = "ti,dra7-sdhci";
+		reg = <0x4809c000 0x400>;
+		ti,hwmods = "mmc1";
+		bus-width = <4>;
+		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+	};

Documentation/devicetree/bindings/mmc/tmio_mmc.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
index 54ef642..3c67624 100644
--- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
@@ -10,7 +10,7 @@ described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
 optional bindings can be used.
 
 Required properties:
-- compatible:	"renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
+- compatible: should contain one or more of the following:
 		"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
 		"renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC
 		"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
@@ -26,6 +26,16 @@ Required properties:
 		"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
 		"renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC
 		"renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC
+		"renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller
+		"renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller
+		"renesas,rcar-gen2-sdhi" - a generic R-Car Gen2 or RZ/G1
+					   SDHI controller
+		"renesas,rcar-gen3-sdhi" - a generic R-Car Gen3 SDHI controller
+
+
+		When compatible with the generic version, nodes must list
+		the SoC-specific version corresponding to the platform
+		first followed by the generic version.
 
 - clocks: Most controllers only have 1 clock source per channel. However, on
 	  some variations of this controller, the internal card detection
@@ -43,3 +53,61 @@ Optional properties:
 - pinctrl-names: should be "default", "state_uhs"
 - pinctrl-0: should contain default/high speed pin ctrl
 - pinctrl-1: should contain uhs mode pin ctrl
+
+Example: R8A7790 (R-Car H2) SDHI controller nodes
+
+	sdhi0: sd@ee100000 {
+		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+		reg = <0 0xee100000 0 0x328>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 314>;
+		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+		       <&dmac1 0xcd>, <&dmac1 0xce>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <195000000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		resets = <&cpg 314>;
+		status = "disabled";
+	};
+
+	sdhi1: sd@ee120000 {
+		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+		reg = <0 0xee120000 0 0x328>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 313>;
+		dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
+		       <&dmac1 0xc9>, <&dmac1 0xca>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <195000000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		resets = <&cpg 313>;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ee140000 {
+		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+		reg = <0 0xee140000 0 0x100>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 312>;
+		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+		       <&dmac1 0xc1>, <&dmac1 0xc2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		resets = <&cpg 312>;
+		status = "disabled";
+	};
+
+	sdhi3: sd@ee160000 {
+		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+		reg = <0 0xee160000 0 0x100>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 311>;
+		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+		       <&dmac1 0xd3>, <&dmac1 0xd4>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		resets = <&cpg 311>;
+		status = "disabled";
+	};

MAINTAINERS

View file

diff --git a/MAINTAINERS b/MAINTAINERS
index 48d8f05..779fa6d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12067,6 +12067,12 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/mmc/host/sdhci-spear.c
 
+SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) TI OMAP DRIVER
+M:	Kishon Vijay Abraham I <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/mmc/host/sdhci-omap.c
+
 SECURE ENCRYPTING DEVICE (SED) OPAL DRIVER
 M:	Scott Bauer <[email protected]>
 M:	Jonathan Derrick <[email protected]>

arch/arm64/boot/dts/mediatek/mt8173.dtsi

View file

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index b99a273..26396ef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -682,8 +682,7 @@
 		};
 
 		mmc0: mmc@11230000 {
-			compatible = "mediatek,mt8173-mmc",
-				     "mediatek,mt8135-mmc";
+			compatible = "mediatek,mt8173-mmc";
 			reg = <0 0x11230000 0 0x1000>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&pericfg CLK_PERI_MSDC30_0>,
@@ -693,8 +692,7 @@
 		};
 
 		mmc1: mmc@11240000 {
-			compatible = "mediatek,mt8173-mmc",
-				     "mediatek,mt8135-mmc";
+			compatible = "mediatek,mt8173-mmc";
 			reg = <0 0x11240000 0 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&pericfg CLK_PERI_MSDC30_1>,
@@ -704,8 +702,7 @@
 		};
 
 		mmc2: mmc@11250000 {
-			compatible = "mediatek,mt8173-mmc",
-				     "mediatek,mt8135-mmc";
+			compatible = "mediatek,mt8173-mmc";
 			reg = <0 0x11250000 0 0x1000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&pericfg CLK_PERI_MSDC30_2>,
@@ -715,8 +712,7 @@
 		};
 
 		mmc3: mmc@11260000 {
-			compatible = "mediatek,mt8173-mmc",
-				     "mediatek,mt8135-mmc";
+			compatible = "mediatek,mt8173-mmc";
 			reg = <0 0x11260000 0 0x1000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&pericfg CLK_PERI_MSDC30_3>,

drivers/mmc/core/block.c

View file

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 2ad7b5c..ea80ff4 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -28,6 +28,7 @@
 #include <linux/hdreg.h>
 #include <linux/kdev_t.h>
 #include <linux/blkdev.h>
+#include <linux/cdev.h>
 #include <linux/mutex.h>
 #include <linux/scatterlist.h>
 #include <linux/string_helpers.h>
@@ -86,6 +87,7 @@ static int max_devices;
 #define MAX_DEVICES 256
 
 static DEFINE_IDA(mmc_blk_ida);
+static DEFINE_IDA(mmc_rpmb_ida);
 
 /*
  * There is one mmc_blk_data per slot.
@@ -96,6 +98,7 @@ struct mmc_blk_data {
 	struct gendisk	*disk;
 	struct mmc_queue queue;
 	struct list_head part;
+	struct list_head rpmbs;
 
 	unsigned int	flags;
 #define MMC_BLK_CMD23	(1 << 0)	/* Can do SET_BLOCK_COUNT for multiblock */
@@ -121,6 +124,32 @@ struct mmc_blk_data {
 	int	area_type;
 };
 
+/* Device type for RPMB character devices */
+static dev_t mmc_rpmb_devt;
+
+/* Bus type for RPMB character devices */
+static struct bus_type mmc_rpmb_bus_type = {
+	.name = "mmc_rpmb",
+};
+
+/**
+ * struct mmc_rpmb_data - special RPMB device type for these areas
+ * @dev: the device for the RPMB area
+ * @chrdev: character device for the RPMB area
+ * @id: unique device ID number
+ * @part_index: partition index (0 on first)
+ * @md: parent MMC block device
+ * @node: list item, so we can put this device on a list
+ */
+struct mmc_rpmb_data {
+	struct device dev;
+	struct cdev chrdev;
+	int id;
+	unsigned int part_index;
+	struct mmc_blk_data *md;
+	struct list_head node;
+};
+
 static DEFINE_MUTEX(open_lock);
 
 module_param(perdev_minors, int, 0444);
@@ -299,6 +328,7 @@ struct mmc_blk_ioc_data {
 	struct mmc_ioc_cmd ic;
 	unsigned char *buf;
 	u64 buf_bytes;
+	struct mmc_rpmb_data *rpmb;
 };
 
 static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user(
@@ -437,14 +467,25 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	struct mmc_request mrq = {};
 	struct scatterlist sg;
 	int err;
-	bool is_rpmb = false;
+	unsigned int target_part;
 	u32 status = 0;
 
 	if (!card || !md || !idata)
 		return -EINVAL;
 
-	if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
-		is_rpmb = true;
+	/*
+	 * The RPMB accesses comes in from the character device, so we
+	 * need to target these explicitly. Else we just target the
+	 * partition type for the block device the ioctl() was issued
+	 * on.
+	 */
+	if (idata->rpmb) {
+		/* Support multiple RPMB partitions */
+		target_part = idata->rpmb->part_index;
+		target_part |= EXT_CSD_PART_CONFIG_ACC_RPMB;
+	} else {
+		target_part = md->part_type;
+	}
 
 	cmd.opcode = idata->ic.opcode;
 	cmd.arg = idata->ic.arg;
@@ -488,7 +529,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 
 	mrq.cmd = &cmd;
 
-	err = mmc_blk_part_switch(card, md->part_type);
+	err = mmc_blk_part_switch(card, target_part);
 	if (err)
 		return err;
 
@@ -498,7 +539,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 			return err;
 	}
 
-	if (is_rpmb) {
+	if (idata->rpmb) {
 		err = mmc_set_blockcount(card, data.blocks,
 			idata->ic.write_flag & (1 << 31));
 		if (err)
@@ -538,7 +579,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 
 	memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));
 
-	if (is_rpmb) {
+	if (idata->rpmb) {
 		/*
 		 * Ensure RPMB command has completed by polling CMD13
 		 * "Send Status".
@@ -554,7 +595,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 }
 
 static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md,
-			     struct mmc_ioc_cmd __user *ic_ptr)
+			     struct mmc_ioc_cmd __user *ic_ptr,
+			     struct mmc_rpmb_data *rpmb)
 {
 	struct mmc_blk_ioc_data *idata;
 	struct mmc_blk_ioc_data *idatas[1];
@@ -566,6 +608,8 @@ static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md,
 	idata = mmc_blk_ioctl_copy_from_user(ic_ptr);
 	if (IS_ERR(idata))
 		return PTR_ERR(idata);
+	/* This will be NULL on non-RPMB ioctl():s */
+	idata->rpmb = rpmb;
 
 	card = md->queue.card;
 	if (IS_ERR(card)) {
@@ -581,7 +625,8 @@ static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md,
 		idata->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
 		__GFP_RECLAIM);
 	idatas[0] = idata;
-	req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_IOCTL;
+	req_to_mmc_queue_req(req)->drv_op =
+		rpmb ? MMC_DRV_OP_IOCTL_RPMB : MMC_DRV_OP_IOCTL;
 	req_to_mmc_queue_req(req)->drv_op_data = idatas;
 	req_to_mmc_queue_req(req)->ioc_count = 1;
 	blk_execute_rq(mq->queue, NULL, req, 0);
@@ -596,7 +641,8 @@ cmd_done:
 }
 
 static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md,
-				   struct mmc_ioc_multi_cmd __user *user)
+				   struct mmc_ioc_multi_cmd __user *user,
+				   struct mmc_rpmb_data *rpmb)
 {
 	struct mmc_blk_ioc_data **idata = NULL;
 	struct mmc_ioc_cmd __user *cmds = user->cmds;
@@ -627,6 +673,8 @@ static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md,
 			num_of_cmds = i;
 			goto cmd_err;
 		}
+		/* This will be NULL on non-RPMB ioctl():s */
+		idata[i]->rpmb = rpmb;
 	}
 
 	card = md->queue.card;
@@ -643,7 +691,8 @@ static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md,
 	req = blk_get_request(mq->queue,
 		idata[0]->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
 		__GFP_RECLAIM);
-	req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_IOCTL;
+	req_to_mmc_queue_req(req)->drv_op =
+		rpmb ? MMC_DRV_OP_IOCTL_RPMB : MMC_DRV_OP_IOCTL;
 	req_to_mmc_queue_req(req)->drv_op_data = idata;
 	req_to_mmc_queue_req(req)->ioc_count = num_of_cmds;
 	blk_execute_rq(mq->queue, NULL, req, 0);
@@ -691,7 +740,8 @@ static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
 		if (!md)
 			return -EINVAL;
 		ret = mmc_blk_ioctl_cmd(md,
-					(struct mmc_ioc_cmd __user *)arg);
+					(struct mmc_ioc_cmd __user *)arg,
+					NULL);
 		mmc_blk_put(md);
 		return ret;
 	case MMC_IOC_MULTI_CMD:
@@ -702,7 +752,8 @@ static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
 		if (!md)
 			return -EINVAL;
 		ret = mmc_blk_ioctl_multi_cmd(md,
-					(struct mmc_ioc_multi_cmd __user *)arg);
+					(struct mmc_ioc_multi_cmd __user *)arg,
+					NULL);
 		mmc_blk_put(md);
 		return ret;
 	default:
@@ -1152,18 +1203,6 @@ static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type)
 	md->reset_done &= ~type;
 }
 
-int mmc_access_rpmb(struct mmc_queue *mq)
-{
-	struct mmc_blk_data *md = mq->blkdata;
-	/*
-	 * If this is a RPMB partition access, return ture
-	 */
-	if (md && md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
-		return true;
-
-	return false;
-}
-
 /*
  * The non-block commands come back from the block layer after it queued it and
  * processed it with all other requests and then they get issued in this
@@ -1174,17 +1213,19 @@ static void mmc_blk_issue_drv_op(struct mmc_queue *mq, struct request *req)
 	struct mmc_queue_req *mq_rq;
 	struct mmc_card *card = mq->card;
 	struct mmc_blk_data *md = mq->blkdata;
-	struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev);
 	struct mmc_blk_ioc_data **idata;
+	bool rpmb_ioctl;
 	u8 **ext_csd;
 	u32 status;
 	int ret;
 	int i;
 
 	mq_rq = req_to_mmc_queue_req(req);
+	rpmb_ioctl = (mq_rq->drv_op == MMC_DRV_OP_IOCTL_RPMB);
 
 	switch (mq_rq->drv_op) {
 	case MMC_DRV_OP_IOCTL:
+	case MMC_DRV_OP_IOCTL_RPMB:
 		idata = mq_rq->drv_op_data;
 		for (i = 0, ret = 0; i < mq_rq->ioc_count; i++) {
 			ret = __mmc_blk_ioctl_cmd(card, md, idata[i]);
@@ -1192,8 +1233,8 @@ static void mmc_blk_issue_drv_op(struct mmc_queue *mq, struct request *req)
 				break;
 		}
 		/* Always switch back to main area after RPMB access */
-		if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
-			mmc_blk_part_switch(card, main_md->part_type);
+		if (rpmb_ioctl)
+			mmc_blk_part_switch(card, 0);
 		break;
 	case MMC_DRV_OP_BOOT_WP:
 		ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP,
@@ -1534,25 +1575,27 @@ static enum mmc_blk_status mmc_blk_err_check(struct mmc_card *card,
 }
 
 static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
-			      int disable_multi, bool *do_rel_wr,
-			      bool *do_data_tag)
+			      int disable_multi, bool *do_rel_wr_p,
+			      bool *do_data_tag_p)
 {
 	struct mmc_blk_data *md = mq->blkdata;
 	struct mmc_card *card = md->queue.card;
 	struct mmc_blk_request *brq = &mqrq->brq;
 	struct request *req = mmc_queue_req_to_req(mqrq);
+	bool do_rel_wr, do_data_tag;
 
 	/*
 	 * Reliable writes are used to implement Forced Unit Access and
 	 * are supported only on MMCs.
 	 */
-	*do_rel_wr = (req->cmd_flags & REQ_FUA) &&
-		     rq_data_dir(req) == WRITE &&
-		     (md->flags & MMC_BLK_REL_WR);
+	do_rel_wr = (req->cmd_flags & REQ_FUA) &&
+		    rq_data_dir(req) == WRITE &&