diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 1797929..2e61606 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1220,10 +1220,98 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
 {
 	const struct regulator_ops *ops = rdev->desc->ops;
 	int ret;
+	bool apply_uV;
+
+	/*
+	 * Decide up front, from the constraints as handed to us, whether
+	 * apply_uV needs to run below. The clamping pass right after this
+	 * may rewrite constraints->min_uV/max_uV (e.g. the fixed-voltage
+	 * autoconfigure case), and we don't want that to change whether
+	 * apply_uV fires.
+	 */
+	apply_uV = rdev->constraints->apply_uV &&
+		   rdev->constraints->min_uV && rdev->constraints->max_uV;
+
+	/*
+	 * Constrain machine-level voltage specs to fit the actual range
+	 * supported by this regulator before apply_uV (below) tries to
+	 * force hardware to a value from that range: otherwise apply_uV
+	 * can target a constraint value that doesn't correspond to any
+	 * real voltage selector and fail registration outright, even
+	 * though the clamping pass would have narrowed it to a value
+	 * the regulator can actually hit.
+	 */
+	if (ops->list_voltage && rdev->desc->n_voltages) {
+		int	count = rdev->desc->n_voltages;
+		int	i;
+		int	min_uV = INT_MAX;
+		int	max_uV = INT_MIN;
+		int	cmin = constraints->min_uV;
+		int	cmax = constraints->max_uV;
+
+		/* it's safe to autoconfigure fixed-voltage supplies
+		 * and the constraints are used by list_voltage.
+		 */
+		if (count == 1 && !cmin) {
+			cmin = 1;
+			cmax = INT_MAX;
+			constraints->min_uV = cmin;
+			constraints->max_uV = cmax;
+		}
+
+		/* voltage constraints are optional */
+		if ((cmin == 0) && (cmax == 0)) {
+			/* nothing more to do */
+
+		/* else require explicit machine-level constraints */
+		} else if (cmin <= 0 || cmax <= 0 || cmax < cmin) {
+			rdev_err(rdev, "invalid voltage constraints\n");
+			return -EINVAL;
+
+		/* no need to loop voltages if range is continuous */
+		} else if (rdev->desc->continuous_voltage_range) {
+			/* nothing more to do */
+
+		} else {
+			/* initial: [cmin..cmax] valid, [min_uV..max_uV] not */
+			for (i = 0; i < count; i++) {
+				int	value;
+
+				value = ops->list_voltage(rdev, i);
+				if (value <= 0)
+					continue;
+
+				/* maybe adjust [min_uV..max_uV] */
+				if (value >= cmin && value < min_uV)
+					min_uV = value;
+				if (value <= cmax && value > max_uV)
+					max_uV = value;
+			}
+
+			/* final: [min_uV..max_uV] valid iff constraints valid */
+			if (max_uV < min_uV) {
+				rdev_err(rdev,
+					 "unsupportable voltage constraints %u-%uuV\n",
+					 min_uV, max_uV);
+				return -EINVAL;
+			}
+
+			/* use regulator's subset of machine constraints */
+			if (constraints->min_uV < min_uV) {
+				rdev_dbg(rdev, "override min_uV, %d -> %d\n",
+					 constraints->min_uV, min_uV);
+				constraints->min_uV = min_uV;
+			}
+			if (constraints->max_uV > max_uV) {
+				rdev_dbg(rdev, "override max_uV, %d -> %d\n",
+					 constraints->max_uV, max_uV);
+				constraints->max_uV = max_uV;
+			}
+		}
+	}
 
 	/* do we need to apply the constraint voltage */
-	if (rdev->constraints->apply_uV &&
-	    rdev->constraints->min_uV && rdev->constraints->max_uV) {
+	if (apply_uV) {
 		int target_min, target_max;
 		int current_uV = regulator_get_voltage_rdev(rdev);
 
@@ -1278,77 +1366,6 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
 		}
 	}
 
-	/* constrain machine-level voltage specs to fit
-	 * the actual range supported by this regulator.
-	 */
-	if (ops->list_voltage && rdev->desc->n_voltages) {
-		int	count = rdev->desc->n_voltages;
-		int	i;
-		int	min_uV = INT_MAX;
-		int	max_uV = INT_MIN;
-		int	cmin = constraints->min_uV;
-		int	cmax = constraints->max_uV;
-
-		/* it's safe to autoconfigure fixed-voltage supplies
-		 * and the constraints are used by list_voltage.
-		 */
-		if (count == 1 && !cmin) {
-			cmin = 1;
-			cmax = INT_MAX;
-			constraints->min_uV = cmin;
-			constraints->max_uV = cmax;
-		}
-
-		/* voltage constraints are optional */
-		if ((cmin == 0) && (cmax == 0))
-			return 0;
-
-		/* else require explicit machine-level constraints */
-		if (cmin <= 0 || cmax <= 0 || cmax < cmin) {
-			rdev_err(rdev, "invalid voltage constraints\n");
-			return -EINVAL;
-		}
-
-		/* no need to loop voltages if range is continuous */
-		if (rdev->desc->continuous_voltage_range)
-			return 0;
-
-		/* initial: [cmin..cmax] valid, [min_uV..max_uV] not */
-		for (i = 0; i < count; i++) {
-			int	value;
-
-			value = ops->list_voltage(rdev, i);
-			if (value <= 0)
-				continue;
-
-			/* maybe adjust [min_uV..max_uV] */
-			if (value >= cmin && value < min_uV)
-				min_uV = value;
-			if (value <= cmax && value > max_uV)
-				max_uV = value;
-		}
-
-		/* final: [min_uV..max_uV] valid iff constraints valid */
-		if (max_uV < min_uV) {
-			rdev_err(rdev,
-				 "unsupportable voltage constraints %u-%uuV\n",
-				 min_uV, max_uV);
-			return -EINVAL;
-		}
-
-		/* use regulator's subset of machine constraints */
-		if (constraints->min_uV < min_uV) {
-			rdev_dbg(rdev, "override min_uV, %d -> %d\n",
-				 constraints->min_uV, min_uV);
-			constraints->min_uV = min_uV;
-		}
-		if (constraints->max_uV > max_uV) {
-			rdev_dbg(rdev, "override max_uV, %d -> %d\n",
-				 constraints->max_uV, max_uV);
-			constraints->max_uV = max_uV;
-		}
-	}
-
 	return 0;
 }
 
diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c
index f2bb3c1..d6a0ec4 100644
--- a/drivers/regulator/mt6358-regulator.c
+++ b/drivers/regulator/mt6358-regulator.c
@@ -492,7 +492,7 @@ static const struct regulator_ops mt6358_volt_fixed_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
-	.get_voltage_sel = mt6358_get_buck_voltage_sel,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
