diff --git a/.get_maintainer.ignore b/.get_maintainer.ignore index b458815..e8d2269 100644 --- a/.get_maintainer.ignore +++ b/.get_maintainer.ignore @@ -1,5 +1,6 @@ Alan Cox Alan Cox +Alyssa Rosenzweig Christoph Hellwig Jeff Kirsher Marc Gonzalez diff --git a/MAINTAINERS b/MAINTAINERS index 520fb4e..0e897f2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1845,7 +1845,6 @@ S: Odd fixes F: drivers/input/mouse/bcm5974.c APPLE PCIE CONTROLLER DRIVER -M: Alyssa Rosenzweig M: Marc Zyngier L: linux-pci@vger.kernel.org S: Maintained @@ -2364,7 +2363,6 @@ F: sound/soc/codecs/ssm3515.c ARM/APPLE MACHINE SUPPORT M: Sven Peter M: Janne Grunau -R: Alyssa Rosenzweig R: Neal Gompa L: asahi@lists.linux.dev L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts index 83d283c..d425d9e 100644 --- a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts @@ -218,7 +218,7 @@ &usbphy { usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi index 2725848..a0f7875 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi @@ -82,7 +82,7 @@ }; &ehci0 { - status = "okay"; + status = "okay"; }; &mmc1 { diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi index fa162f7..f0ed802 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi @@ -705,7 +705,7 @@ }; /omit-if-no-ref/ - uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{ + uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins { pins = "PI16", "PI17"; function = "uart2"; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts index 5143cb4..cb62923 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts @@ -29,7 +29,7 @@ clk_can0: clock-can0 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <40000000>; + clock-frequency = <40000000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts index ce0d651..e4794cc 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts @@ -66,8 +66,10 @@ mdio0 { #address-cells = <1>; #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@4 { + reg = <4>; rxd0-skew-ps = <0>; rxd1-skew-ps = <0>; rxd2-skew-ps = <0>; diff --git a/arch/arm/boot/dts/marvell/armada-370-db.dts b/arch/arm/boot/dts/marvell/armada-370-db.dts index a7dc4c0..a9a05d8 100644 --- a/arch/arm/boot/dts/marvell/armada-370-db.dts +++ b/arch/arm/boot/dts/marvell/armada-370-db.dts @@ -119,7 +119,7 @@ "Out Jack", "HPL", "Out Jack", "HPR", "AIN1L", "In Jack", - "AIN1L", "In Jack"; + "AIN1R", "In Jack"; status = "okay"; simple-audio-card,dai-link@0 { diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts index d4e0b81..cf26e2c 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts @@ -38,7 +38,7 @@ simple-audio-card,mclk-fs = <256>; simple-audio-card,cpu { - sound-dai = <&audio0 0>; + sound-dai = <&audio0>; }; simple-audio-card,codec { diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index dc47b23..6ea1bd5 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -242,7 +242,7 @@ choice config VF_USE_PIT_TIMER bool "Use PIT timer" - select VF_PIT_TIMER + select NXP_PIT_TIMER help Use SoC Periodic Interrupt Timer (PIT) as clocksource diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index bb24dba..d6d21e8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -298,7 +298,7 @@ cpu-thermal { polling-delay-passive = <250>; polling-delay = <2000>; - thermal-sensors = <&tmu 0>; + thermal-sensors = <&tmu 1>; trips { cpu_alert0: trip0 { temperature = <85000>; @@ -331,7 +331,7 @@ soc-thermal { polling-delay-passive = <250>; polling-delay = <2000>; - thermal-sensors = <&tmu 1>; + thermal-sensors = <&tmu 0>; trips { soc_alert0: trip0 { temperature = <85000>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index 0d4a5fd..f2d278d 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -345,11 +345,13 @@ /* CPS Lane 1 - U32 */ sata-port@0 { phys = <&cp1_comphy1 0>; + status = "okay"; }; /* CPS Lane 3 - U31 */ sata-port@1 { phys = <&cp1_comphy3 1>; + status = "okay"; }; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi index ad0ab34..bd42bfb 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi @@ -152,11 +152,12 @@ /* SRDS #0 - SATA on M.2 connector */ &cp0_sata0 { - phys = <&cp0_comphy0 1>; status = "okay"; - /* only port 1 is available */ - /delete-node/ sata-port@0; + sata-port@1 { + phys = <&cp0_comphy0 1>; + status = "okay"; + }; }; /* microSD */ diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts index 47234d0..338853d 100644 --- a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts +++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts @@ -563,11 +563,13 @@ /* SRDS #1 - SATA on M.2 (J44) */ &cp1_sata0 { - phys = <&cp1_comphy1 0>; status = "okay"; /* only port 0 is available */ - /delete-node/ sata-port@1; + sata-port@0 { + phys = <&cp1_comphy1 0>; + status = "okay"; + }; }; &cp1_syscon0 { diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts index 0f53745..6f237d3 100644 --- a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts +++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts @@ -413,7 +413,13 @@ /* SRDS #0,#1,#2,#3 - PCIe */ &cp0_pcie0 { num-lanes = <4>; - phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; + /* + * The mvebu-comphy driver does not currently know how to pass correct + * lane-count to ATF while configuring the serdes lanes. + * Rely on bootloader configuration only. + * + * phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; + */ status = "okay"; }; @@ -475,7 +481,13 @@ /* SRDS #0,#1 - PCIe */ &cp1_pcie0 { num-lanes = <2>; - phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; + /* + * The mvebu-comphy driver does not currently know how to pass correct + * lane-count to ATF while configuring the serdes lanes. + * Rely on bootloader configuration only. + * + * phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; + */ status = "okay"; }; @@ -512,10 +524,9 @@ status = "okay"; /* only port 1 is available */ - /delete-node/ sata-port@0; - sata-port@1 { phys = <&cp1_comphy3 1>; + status = "okay"; }; }; @@ -631,9 +642,8 @@ status = "okay"; /* only port 1 is available */ - /delete-node/ sata-port@0; - sata-port@1 { + status = "okay"; phys = <&cp2_comphy3 1>; }; }; diff --git a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi index afc041c..bb2bb47 100644 --- a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi @@ -137,6 +137,14 @@ pinctrl-0 = <&ap_mmc0_pins>; pinctrl-names = "default"; vqmmc-supply = <&v_1_8>; + /* + * Not stable in HS modes - phy needs "more calibration", so disable + * UHS (by preventing voltage switch), SDR104, SDR50 and DDR50 modes. + */ + no-1-8-v; + no-sd; + no-sdio; + non-removable; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi index 3d8b6f0..69833a0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi @@ -731,6 +731,7 @@ spi-max-frequency = <104000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <1>; + vcc-supply = <&vcc_1v8_s3>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi index 4fedc50..11940c7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi @@ -42,9 +42,8 @@ simple-audio-card,bitclock-master = <&masterdai>; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&masterdai>; - simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; simple-audio-card,mclk-fs = <256>; - simple-audio-card,pin-switches = "Headphones"; simple-audio-card,routing = "Headphones", "LOUT1", "Headphones", "ROUT1", diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts index bc5c84f..5f2e5cc 100644 --- a/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts @@ -17,7 +17,7 @@ #cooling-cells = <2>; }; - i2c-gpio-0 { + i2c-0 { compatible = "i2c-gpio"; sda-gpios = <&pio 3 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD14/GPIO44 */ scl-gpios = <&pio 3 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD15/GPIO45 */ diff --git a/drivers/firmware/tegra/bpmp-tegra186.c b/drivers/firmware/tegra/bpmp-tegra186.c index 7cfc5fd..64863db 100644 --- a/drivers/firmware/tegra/bpmp-tegra186.c +++ b/drivers/firmware/tegra/bpmp-tegra186.c @@ -198,7 +198,10 @@ static int tegra186_bpmp_dram_init(struct tegra_bpmp *bpmp) err = of_reserved_mem_region_to_resource(bpmp->dev->of_node, 0, &res); if (err < 0) { - dev_warn(bpmp->dev, "failed to parse memory region: %d\n", err); + if (err != -ENODEV) + dev_warn(bpmp->dev, + "failed to parse memory region: %d\n", err); + return err; } diff --git a/drivers/reset/reset-eyeq.c b/drivers/reset/reset-eyeq.c index 02d5004..2d39983 100644 --- a/drivers/reset/reset-eyeq.c +++ b/drivers/reset/reset-eyeq.c @@ -410,6 +410,13 @@ static int eqr_of_xlate_twocells(struct reset_controller_dev *rcdev, return eqr_of_xlate_internal(rcdev, reset_spec->args[0], reset_spec->args[1]); } +static void eqr_of_node_put(void *_dev) +{ + struct device *dev = _dev; + + of_node_put(dev->of_node); +} + static int eqr_probe(struct auxiliary_device *adev, const struct auxiliary_device_id *id) { @@ -428,6 +435,10 @@ static int eqr_probe(struct auxiliary_device *adev, if (!dev->of_node) return -ENODEV; + ret = devm_add_action_or_reset(dev, eqr_of_node_put, dev); + if (ret) + return ret; + /* * Using our newfound OF node, we can get match data. We cannot use * device_get_match_data() because it does not match reused OF nodes. diff --git a/include/linux/firmware/imx/sm.h b/include/linux/firmware/imx/sm.h index d4212bc..a33b450 100644 --- a/include/linux/firmware/imx/sm.h +++ b/include/linux/firmware/imx/sm.h @@ -26,13 +26,43 @@ #define SCMI_IMX94_CTRL_SAI3_MCLK 5U /*!< WAKE SAI3 MCLK */ #define SCMI_IMX94_CTRL_SAI4_MCLK 6U /*!< WAKE SAI4 MCLK */ +#if IS_ENABLED(CONFIG_IMX_SCMI_MISC_DRV) int scmi_imx_misc_ctrl_get(u32 id, u32 *num, u32 *val); int scmi_imx_misc_ctrl_set(u32 id, u32 val); +#else +static inline int scmi_imx_misc_ctrl_get(u32 id, u32 *num, u32 *val) +{ + return -EOPNOTSUPP; +} +static inline int scmi_imx_misc_ctrl_set(u32 id, u32 val) +{ + return -EOPNOTSUPP; +} +#endif + +#if IS_ENABLED(CONFIG_IMX_SCMI_CPU_DRV) int scmi_imx_cpu_start(u32 cpuid, bool start); int scmi_imx_cpu_started(u32 cpuid, bool *started); int scmi_imx_cpu_reset_vector_set(u32 cpuid, u64 vector, bool start, bool boot, bool resume); +#else +static inline int scmi_imx_cpu_start(u32 cpuid, bool start) +{ + return -EOPNOTSUPP; +} + +static inline int scmi_imx_cpu_started(u32 cpuid, bool *started) +{ + return -EOPNOTSUPP; +} + +static inline int scmi_imx_cpu_reset_vector_set(u32 cpuid, u64 vector, bool start, + bool boot, bool resume) +{ + return -EOPNOTSUPP; +} +#endif enum scmi_imx_lmm_op { SCMI_IMX_LMM_BOOT, @@ -44,7 +74,24 @@ enum scmi_imx_lmm_op { #define SCMI_IMX_LMM_OP_FORCEFUL 0 #define SCMI_IMX_LMM_OP_GRACEFUL BIT(0) +#if IS_ENABLED(CONFIG_IMX_SCMI_LMM_DRV) int scmi_imx_lmm_operation(u32 lmid, enum scmi_imx_lmm_op op, u32 flags); int scmi_imx_lmm_info(u32 lmid, struct scmi_imx_lmm_info *info); int scmi_imx_lmm_reset_vector_set(u32 lmid, u32 cpuid, u32 flags, u64 vector); +#else +static inline int scmi_imx_lmm_operation(u32 lmid, enum scmi_imx_lmm_op op, u32 flags) +{ + return -EOPNOTSUPP; +} + +static inline int scmi_imx_lmm_info(u32 lmid, struct scmi_imx_lmm_info *info) +{ + return -EOPNOTSUPP; +} + +static inline int scmi_imx_lmm_reset_vector_set(u32 lmid, u32 cpuid, u32 flags, u64 vector) +{ + return -EOPNOTSUPP; +} +#endif #endif