Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Merge commit. Changes below are compared with the first parent: 91e8d0cb.
Changes
28 files changed · +1438 −171
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
View filediff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 007a5b4..4c29cda 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -11,6 +11,8 @@ Main node required properties:
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. Must be a single cell with a value of at least 3.
+ If the system requires describing PPI affinity, then the value must
+ be at least 4.
The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
interrupts. Other values are reserved for future use.
@@ -24,7 +26,14 @@ Main node required properties:
1 = edge triggered
4 = level triggered
- Cells 4 and beyond are reserved for future use and must have a value
+ The 4th cell is a phandle to a node describing a set of CPUs this
+ interrupt is affine to. The interrupt must be a PPI, and the node
+ pointed must be a subnode of the "ppi-partitions" subnode. For
+ interrupt types other than PPI or PPIs that are not partitionned,
+ this cell must be zero. See the "ppi-partitions" node description
+ below.
+
+ Cells 5 and beyond are reserved for future use and must have a value
of 0 if present.
- reg : Specifies base physical address(s) and size of the GIC
@@ -50,6 +59,11 @@ Optional
Sub-nodes:
+PPI affinity can be expressed as a single "ppi-partitions" node,
+containing a set of sub-nodes, each with the following property:
+- affinity: Should be a list of phandles to CPU nodes (as described in
+Documentation/devicetree/bindings/arm/cpus.txt).
+
GICv3 has one or more Interrupt Translation Services (ITS) that are
used to route Message Signalled Interrupts (MSI) to the CPUs.
@@ -91,7 +105,7 @@ Examples:
gic: interrupt-controller@2c010000 {
compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
+ #interrupt-cells = <4>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -119,4 +133,20 @@ Examples:
#msi-cells = <1>;
reg = <0x0 0x2c400000 0 0x200000>;
};
+
+ ppi-partitions {
+ part0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu2>;
+ };
+
+ part1: interrupt-partition-1 {
+ affinity = <&cpu1 &cpu3>;
+ };
+ };
+ };
+
+
+ device@0 {
+ reg = <0 0 0 4>;
+ interrupts = <1 1 4 &part0>;
};
Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
View filediff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
new file mode 100644
index 0000000..9e38949
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
@@ -0,0 +1,30 @@
+* Freescale Layerscape SCFG PCIe MSI controller
+
+Required properties:
+
+- compatible: should be "fsl,<soc-name>-msi" to identify
+ Layerscape PCIe MSI controller block such as:
+ "fsl,1s1021a-msi"
+ "fsl,1s1043a-msi"
+- msi-controller: indicates that this is a PCIe MSI controller node
+- reg: physical base address of the controller and length of memory mapped.
+- interrupts: an interrupt to the parent interrupt controller.
+
+Optional properties:
+- interrupt-parent: the phandle to the parent interrupt controller.
+
+This interrupt controller hardware is a second level interrupt controller that
+is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+platforms. If interrupt-parent is not provided, the default parent interrupt
+controller will be used.
+Each PCIe node needs to have property msi-parent that points to
+MSI controller node
+
+Examples:
+
+ msi1: msi-controller@1571000 {
+ compatible = "fsl,1s1043a-msi";
+ reg = <0x0 0x1571000 0x0 0x8>,
+ msi-controller;
+ interrupts = <0 116 0x4>;
+ };
arch/arm/Kconfig
View filediff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cdfa6c2..6684af9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -531,6 +531,8 @@ config ARCH_LPC32XX
select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
select USE_OF
help
Support for the NXP LPC32XX family of processors
arch/arm/mach-lpc32xx/phy3250.c
View filediff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index b2f9e22..f9209d0 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -206,7 +206,6 @@ static const char *const lpc32xx_dt_compat[] __initconst = {
DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
.atag_offset = 0x100,
.map_io = lpc32xx_map_io,
- .init_irq = lpc32xx_init_irq,
.init_machine = lpc3250_machine_init,
.dt_compat = lpc32xx_dt_compat,
MACHINE_END
drivers/irqchip/Kconfig
View filediff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3e12479..81f88ad 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -27,6 +27,7 @@ config ARM_GIC_V3
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
select IRQ_DOMAIN_HIERARCHY
+ select PARTITION_PERCPU
config ARM_GIC_V3_ITS
bool
@@ -244,3 +245,11 @@ config IRQ_MXS
config MVEBU_ODMI
bool
select GENERIC_MSI_IRQ_DOMAIN
+
+config LS_SCFG_MSI
+ def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
+ depends on PCI && PCI_MSI
+ select PCI_MSI_IRQ_DOMAIN
+
+config PARTITION_PERCPU
+ bool
drivers/irqchip/Makefile
View filediff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index b03cfcb..f828244 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o
obj-$(CONFIG_ARCH_HIP04) += irq-hip04.o
+obj-$(CONFIG_ARCH_LPC32XX) += irq-lpc32xx.o
obj-$(CONFIG_ARCH_MMP) += irq-mmp.o
obj-$(CONFIG_IRQ_MXS) += irq-mxs.o
obj-$(CONFIG_ARCH_TEGRA) += irq-tegra.o
@@ -27,6 +28,7 @@ obj-$(CONFIG_REALVIEW_DT) += irq-gic-realview.o
obj-$(CONFIG_ARM_GIC_V2M) += irq-gic-v2m.o
obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_V3_ITS) += irq-gic-v3-its.o irq-gic-v3-its-pci-msi.o irq-gic-v3-its-platform-msi.o
+obj-$(CONFIG_PARTITION_PERCPU) += irq-partition-percpu.o
obj-$(CONFIG_HISILICON_IRQ_MBIGEN) += irq-mbigen.o
obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
obj-$(CONFIG_ARM_VIC) += irq-vic.o
@@ -65,3 +67,4 @@ obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o
+obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
drivers/irqchip/irq-alpine-msi.c
View filediff --git a/drivers/irqchip/irq-alpine-msi.c b/drivers/irqchip/irq-alpine-msi.c
index 2538425..63d9809 100644
--- a/drivers/irqchip/irq-alpine-msi.c
+++ b/drivers/irqchip/irq-alpine-msi.c
@@ -23,7 +23,7 @@
#include <linux/slab.h>
#include <asm/irq.h>
-#include <asm-generic/msi.h>
+#include <asm/msi.h>
/* MSIX message address format: local GIC target */
#define ALPINE_MSIX_SPI_TARGET_CLUSTER0 BIT(16)
drivers/irqchip/irq-bcm2836.c
View filediff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
index b6e950d..72ff1d5 100644
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -195,7 +195,7 @@ static void bcm2836_arm_irqchip_send_ipi(const struct cpumask *mask,
* Ensure that stores to normal memory are visible to the
* other CPUs before issuing the IPI.
*/
- dsb();
+ smp_wmb();
for_each_cpu(cpu, mask) {
writel(1 << ipi, mailbox0_base + 16 * cpu);
@@ -223,6 +223,7 @@ static struct notifier_block bcm2836_arm_irqchip_cpu_notifier = {
.priority = 100,
};
+#ifdef CONFIG_ARM
int __init bcm2836_smp_boot_secondary(unsigned int cpu,
struct task_struct *idle)
{
@@ -238,7 +239,7 @@ int __init bcm2836_smp_boot_secondary(unsigned int cpu,
static const struct smp_operations bcm2836_smp_ops __initconst = {
.smp_boot_secondary = bcm2836_smp_boot_secondary,
};
-
+#endif
#endif
static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = {
@@ -252,12 +253,15 @@ bcm2836_arm_irqchip_smp_init(void)
/* Unmask IPIs to the boot CPU. */
bcm2836_arm_irqchip_cpu_notify(&bcm2836_arm_irqchip_cpu_notifier,
CPU_STARTING,
- (void *)smp_processor_id());
+ (void *)(uintptr_t)smp_processor_id());
register_cpu_notifier(&bcm2836_arm_irqchip_cpu_notifier);
set_smp_cross_call(bcm2836_arm_irqchip_send_ipi);
+
+#ifdef CONFIG_ARM
smp_set_ops(&bcm2836_smp_ops);
#endif
+#endif
}
/*
drivers/irqchip/irq-crossbar.c
View filediff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
index 75573fa..1eef56a 100644
--- a/drivers/irqchip/irq-crossbar.c
+++ b/drivers/irqchip/irq-crossbar.c
@@ -183,7 +183,7 @@ static int crossbar_domain_translate(struct irq_domain *d,
return -EINVAL;
*hwirq = fwspec->param[1];
- *type = fwspec->param[2];
+ *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
return 0;
}
drivers/irqchip/irq-gic-common.c
View filediff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index f174ce0..97c0028 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -50,14 +50,26 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
else if (type & IRQ_TYPE_EDGE_BOTH)
val |= confmask;
+ /* If the current configuration is the same, then we are done */
+ if (val == oldval)
+ return 0;
+
/*
* Write back the new configuration, and possibly re-enable
- * the interrupt. If we tried to write a new configuration and failed,
- * return an error.
+ * the interrupt. If we fail to write a new configuration for
+ * an SPI then WARN and return an error. If we fail to write the
+ * configuration for a PPI this is most likely because the GIC
+ * does not allow us to set the configuration or we are in a
+ * non-secure mode, and hence it may not be catastrophic.
*/
writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
- if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val && val != oldval)
- ret = -EINVAL;
+ if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val) {
+ if (WARN_ON(irq >= 32))
+ ret = -EINVAL;
+ else
+ pr_warn("GIC: PPI%d is secure or misconfigured\n",
+ irq - 16);
+ }
if (sync_access)
sync_access();
drivers/irqchip/irq-gic-v2m.c
View filediff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c
index 28f047c..ad0d296 100644
--- a/drivers/irqchip/irq-gic-v2m.c
+++ b/drivers/irqchip/irq-gic-v2m.c
@@ -49,6 +49,9 @@
/* APM X-Gene with GICv2m MSI_IIDR register value */
#define XGENE_GICV2M_MSI_IIDR 0x06000170
+/* Broadcom NS2 GICv2m MSI_IIDR register value */
+#define BCM_NS2_GICV2M_MSI_IIDR 0x0000013f
+
/* List of flags for specific v2m implementation */
#define GICV2M_NEEDS_SPI_OFFSET 0x00000001
@@ -62,6 +65,7 @@ struct v2m_data {
void __iomem *base; /* GICv2m virt address */
u32 spi_start; /* The SPI number that MSIs start */
u32 nr_spis; /* The number of SPIs for MSIs */
+ u32 spi_offset; /* offset to be subtracted from SPI number */
unsigned long *bm; /* MSI vector bitmap */
u32 flags; /* v2m flags for specific implementation */
};
@@ -102,7 +106,7 @@ static void gicv2m_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
msg->data = data->hwirq;
if (v2m->flags & GICV2M_NEEDS_SPI_OFFSET)
- msg->data -= v2m->spi_start;
+ msg->data -= v2m->spi_offset;
}
static struct irq_chip gicv2m_irq_chip = {
@@ -340,9 +344,20 @@ static int __init gicv2m_init_one(struct fwnode_handle *fwnode,
* different from the standard GICv2m implementation where
* the MSI data is the absolute value within the range from
* spi_start to (spi_start + num_spis).
+ *
+ * Broadom NS2 GICv2m implementation has an erratum where the MSI data
+ * is 'spi_number - 32'
*/
- if (readl_relaxed(v2m->base + V2M_MSI_IIDR) == XGENE_GICV2M_MSI_IIDR)
+ switch (readl_relaxed(v2m->base + V2M_MSI_IIDR)) {
+ case XGENE_GICV2M_MSI_IIDR:
+ v2m->flags |= GICV2M_NEEDS_SPI_OFFSET;
+ v2m->spi_offset = v2m->spi_start;
+ break;
+ case BCM_NS2_GICV2M_MSI_IIDR:
v2m->flags |= GICV2M_NEEDS_SPI_OFFSET;
+ v2m->spi_offset = 32;
+ break;
+ }
v2m->bm = kzalloc(sizeof(long) * BITS_TO_LONGS(v2m->nr_spis),
GFP_KERNEL);
drivers/irqchip/irq-gic-v3-its.c
View filediff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 3926179..6bd881b 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -55,6 +55,16 @@ struct its_collection {
};
/*
+ * The ITS_BASER structure - contains memory information and cached
+ * value of BASER register configuration.
+ */
+struct its_baser {
+ void *base;
+ u64 val;
+ u32 order;
+};
+
+/*
* The ITS structure - contains most of the infrastructure, with the
* top-level MSI domain, the command queue, the collections, and the
* list of devices writing to it.
@@ -66,14 +76,12 @@ struct its_node {
unsigned long phys_base;
struct its_cmd_block *cmd_base;
struct its_cmd_block *cmd_write;
- struct {
- void *base;
- u32 order;
- } tables[GITS_BASER_NR_REGS];
+ struct its_baser tables[GITS_BASER_NR_REGS];
struct its_collection *collections;
struct list_head its_device_list;
u64 flags;
u32 ite_size;
+ u32 device_ids;
};
#define ITS_ITT_ALIGN SZ_256
@@ -838,6 +846,8 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
ids = GITS_TYPER_DEVBITS(typer);
}
+ its->device_ids = ids;
+
for (i = 0; i < GITS_BASER_NR_REGS; i++) {
u64 val = readq_relaxed(its->base + GITS_BASER + i * 8);
u64 type = GITS_BASER_TYPE(val);
@@ -913,6 +923,7 @@ retry_baser:
}
val |= alloc_pages - 1;
+ its->tables[i].val = val;
writeq_relaxed(val, its->base + GITS_BASER + i * 8);
tmp = readq_relaxed(its->base + GITS_BASER + i * 8);
@@ -1138,9 +1149,22 @@ static struct its_device *its_find_device(struct its_node *its, u32 dev_id)
return its_dev;
}
+static struct its_baser *its_get_baser(struct its_node *its, u32 type)
+{
+ int i;
+
+ for (i = 0; i < GITS_BASER_NR_REGS; i++) {
+ if (GITS_BASER_TYPE(its->tables[i].val) == type)
+ return &its->tables[i];
+ }
+
+ return NULL;
+}
+
static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
int nvecs)
{
+ struct its_baser *baser;
struct its_device *dev;
unsigned long *lpi_map;
unsigned long flags;
@@ -1151,6 +1175,16 @@ static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
int nr_ites;
int sz;
+ baser = its_get_baser(its, GITS_BASER_TYPE_DEVICE);
+
+ /* Don't allow 'dev_id' that exceeds single, flat table limit */
+ if (baser) {
+ if (dev_id >= (PAGE_ORDER_TO_SIZE(baser->order) /
+ GITS_BASER_ENTRY_SIZE(baser->val)))
+ return NULL;
+ } else if (ilog2(dev_id) >= its->device_ids)
+ return NULL;
+
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
/*
* At least one bit of EventID is being used, hence a minimum
drivers/irqchip/irq-gic-v3.c
View filediff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 5b7d3c2..1a1ea4f 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -29,6 +29,7 @@
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic-v3.h>
+#include <linux/irqchip/irq-partition-percpu.h>
#include <asm/cputype.h>
#include <asm/exception.h>
@@ -44,6 +45,7 @@ struct redist_region {
};
struct gic_chip_data {
+ struct fwnode_handle *fwnode;
void __iomem *dist_base;
struct redist_region *redist_regions;
struct rdists rdists;
@@ -51,6 +53,7 @@ struct gic_chip_data {
u64 redist_stride;
u32 nr_redist_regions;
unsigned int irq_nr;
+ struct partition_desc *ppi_descs[16];
};
static struct gic_chip_data gic_data __read_mostly;
@@ -364,6 +367,13 @@ static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs
if (static_key_true(&supports_deactivate))
gic_write_dir(irqnr);
#ifdef CONFIG_SMP
+ /*
+ * Unlike GICv2, we don't need an smp_rmb() here.
+ * The control dependency from gic_read_iar to
+ * the ISB in gic_write_eoir is enough to ensure
+ * that any shared data read by handle_IPI will
+ * be read after the ACK.
+ */
handle_IPI(irqnr, regs);
#else
WARN_ONCE(true, "Unexpected SGI received!\n");
@@ -383,6 +393,15 @@ static void __init gic_dist_init(void)
writel_relaxed(0, base + GICD_CTLR);
gic_dist_wait_for_rwp();
+ /*
+ * Configure SPIs as non-secure Group-1. This will only matter
+ * if the GIC only has a single security state. This will not
+ * do the right thing if the kernel is running in secure mode,
+ * but that's not the intended use case anyway.
+ */
+ for (i = 32; i < gic_data.irq_nr; i += 32)
+ writel_relaxed(~0, base + GICD_IGROUPR + i / 8);
+
gic_dist_config(base, gic_data.irq_nr, gic_dist_wait_for_rwp);
/* Enable distributor with ARE, Group1 */
@@ -500,6 +519,9 @@ static void gic_cpu_init(void)
rbase = gic_data_rdist_sgi_base();
+ /* Configure SGIs/PPIs as non-secure Group-1 */
+ writel_relaxed(~0, rbase + GICR_IGROUPR0);
+
gic_cpu_config(rbase, gic_redist_wait_for_rwp);
/* Give LPIs a spin */
@@ -812,10 +834,62 @@ static void gic_irq_domain_free(struct irq_domain *domain, unsigned int virq,
}
}
+static int gic_irq_domain_select(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ enum irq_domain_bus_token bus_token)
+{
+ /* Not for us */
+ if (fwspec->fwnode != d->fwnode)
+ return 0;
+
+ /* If this is not DT, then we have a single domain */
+ if (!is_of_node(fwspec->fwnode))
+ return 1;
+
+ /*
+ * If this is a PPI and we have a 4th (non-null) parameter,
+ * then we need to match the partition domain.
+ */
+ if (fwspec->param_count >= 4 &&
+ fwspec->param[0] == 1 && fwspec->param[3] != 0)
+ return d == partition_get_domain(gic_data.ppi_descs[fwspec->param[1]]);
+
+ return d == gic_data.domain;
+}
+
static const struct irq_domain_ops gic_irq_domain_ops = {
.translate = gic_irq_domain_translate,
.alloc = gic_irq_domain_alloc,
.free = gic_irq_domain_free,
+ .select = gic_irq_domain_select,
+};
+
+static int partition_domain_translate(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ unsigned long *hwirq,
+ unsigned int *type)
+{
+ struct device_node *np;
+ int ret;
+
+ np = of_find_node_by_phandle(fwspec->param[3]);
+ if (WARN_ON(!np))
+ return -EINVAL;
+
+ ret = partition_translate_id(gic_data.ppi_descs[fwspec->param[1]],
+ of_node_to_fwnode(np));
+ if (ret < 0)
+ return ret;
+
+ *hwirq = ret;
+ *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
+
+ return 0;
+}
+
+static const struct irq_domain_ops partition_domain_ops = {
+ .translate = partition_domain_translate,
+ .select = gic_irq_domain_select,
};
static void gicv3_enable_quirks(void)
@@ -843,6 +917,7 @@ static int __init gic_init_bases(void __iomem *dist_base,
if (static_key_true(&supports_deactivate))
pr_info("GIC: Using split EOI/Deactivate mode\n");
+ gic_data.fwnode = handle;
gic_data.dist_base = dist_base;
gic_data.redist_regions = rdist_regs;
gic_data.nr_redist_regions = nr_redist_regions;
@@ -901,6 +976,119 @@ static int __init gic_validate_dist_version(void __iomem *dist_base)
return 0;
}
+static int get_cpu_number(struct device_node *dn)
+{
+ const __be32 *cell;
+ u64 hwid;
+ int i;
+
+ cell = of_get_property(dn, "reg", NULL);
+ if (!cell)
+ return -1;
+
+ hwid = of_read_number(cell, of_n_addr_cells(dn));
+
+ /*
+ * Non affinity bits must be set to 0 in the DT
+ */
+ if (hwid & ~MPIDR_HWID_BITMASK)
+ return -1;
+
+ for (i = 0; i < num_possible_cpus(); i++)
+ if (cpu_logical_map(i) == hwid)
This diff is incomplete. Download the complete patch.
drivers/irqchip/irq-gic.c
View fileThis diff is incomplete. Download the complete patch.
drivers/irqchip/irq-lpc32xx.c
View fileThis diff is incomplete. Download the complete patch.
drivers/irqchip/irq-ls-scfg-msi.c
View fileThis diff is incomplete. Download the complete patch.
drivers/irqchip/irq-mbigen.c
View fileThis diff is incomplete. Download the complete patch.
drivers/irqchip/irq-partition-percpu.c
View fileThis diff is incomplete. Download the complete patch.
drivers/irqchip/irq-tegra.c
View fileThis diff is incomplete. Download the complete patch.
include/linux/irq.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/irqchip/arm-gic-v3.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/irqchip/irq-partition-percpu.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/irqdesc.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/irqdomain.h
View fileThis diff is incomplete. Download the complete patch.
kernel/irq/ipi.c
View fileThis diff is incomplete. Download the complete patch.
kernel/irq/irqdesc.c
View fileThis diff is incomplete. Download the complete patch.
kernel/irq/irqdomain.c
View fileThis diff is incomplete. Download the complete patch.
kernel/irq/manage.c
View fileThis diff is incomplete. Download the complete patch.