Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

efb8d21b · Linus Torvalds <[email protected]> · 2011-10-26 15:11:09 +02:00

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  TTY: serial_core: Fix crash if DCD drop during suspend
  tty/serial: atmel_serial: bootconsole removed from auto-enumerates
  Revert "TTY: call tty_driver_lookup_tty unconditionally"
  tty/serial: atmel_serial: add device tree support
  tty/serial: atmel_serial: auto-enumerate ports
  tty/serial: atmel_serial: whitespace and braces modifications
  tty/serial: atmel_serial: change platform_data variable name
  tty/serial: RS485 bindings for device tree
  TTY: call tty_driver_lookup_tty unconditionally
  TTY: pty, release tty in all ptmx_open fail paths
  TTY: make tty_add_file non-failing
  TTY: drop driver reference in tty_open fail path
  8250_pci: Fix kernel panic when pch_uart is disabled
  h8300: drivers/serial/Kconfig was moved
  parport_pc: release IO region properly if unsupported ITE887x card is found
  tty: Support compat_ioctl get/set termios_locked
  hvc_console: display printk messages on console.
  TTY: snyclinkmp: forever loop in tx_load_dma_buffer()
  tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output
  tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case)
  ...

Fix up Conflicts in:
 - drivers/tty/serial/8250_pci.c
	Trivial conflict with removed duplicate device ID
 - drivers/tty/serial/atmel_serial.c
	Annoying silly conflict between "specify the port num via
	platform_data" and other changes to atmel_console_init

Commit: efb8d21b2c6db3497655cc6a033ae8a9883e4063
Parents: 3cb60328 · d208a3bf

Merge commit. Changes below are compared with the first parent: 3cb60328.

Changes

110 files changed · +2101 −946

File	Status	Add	Del	Content
Documentation/devicetree/bindings/serial/rs485.txt	added	+31	−0	View file
Documentation/devicetree/bindings/tty/serial/atmel-usart.txt	added	+27	−0	View file
Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt	added	+25	−0	View file
Documentation/serial/serial-rs485.txt	modified	+8	−0	View file
arch/arm/Kconfig	modified	+0	−1	View file
arch/arm/mach-s3c64xx/dev-uart.c	modified	+8	−52	View file
arch/arm/mach-s3c64xx/include/mach/irqs.h	modified	+0	−30	View file
arch/arm/mach-s3c64xx/irq.c	modified	+0	−25	View file
arch/arm/plat-s5p/Kconfig	modified	+0	−1	View file
arch/arm/plat-s5p/dev-uart.c	modified	+12	−72	View file
arch/arm/plat-s5p/include/plat/irqs.h	modified	+0	−35	View file
arch/arm/plat-s5p/irq.c	modified	+0	−34	View file
arch/arm/plat-samsung/Kconfig	modified	+0	−5	View file
arch/arm/plat-samsung/Makefile	modified	+0	−1	View file
arch/arm/plat-samsung/include/plat/regs-serial.h	modified	+5	−0	View file
arch/arm/plat-samsung/irq-uart.c	deleted	+0	−96	View before deletion
arch/h8300/Kconfig	modified	+1	−1	View file
arch/mips/pmc-sierra/msp71xx/msp_serial.c	modified	+67	−6	View file
arch/powerpc/include/asm/udbg.h	modified	+1	−0	View file
arch/powerpc/kernel/udbg.c	modified	+2	−0	View file
arch/x86/platform/mrst/mrst.c	modified	+3	−0	View file
drivers/isdn/i4l/isdn_tty.c	modified	+1	−1	View file
drivers/parport/parport_pc.c	modified	+3	−0	View file
drivers/staging/Kconfig	modified	+2	−0	View file
drivers/staging/Makefile	modified	+1	−0	View file
drivers/tty/serial/68360serial.c → drivers/staging/serial/68360serial.c	renamed	+0	−0	View file
drivers/staging/serial/Kconfig	added	+16	−0	View file
drivers/staging/serial/Makefile	added	+1	−0	View file
drivers/staging/serial/TODO	added	+6	−0	View file
drivers/tty/Kconfig	modified	+34	−0	View file
drivers/tty/Makefile	modified	+1	−0	View file
drivers/tty/amiserial.c	modified	+2	−10	View file
drivers/tty/cyclades.c	modified	+2	−12	View file
drivers/tty/ehv_bytechan.c	added	+881	−0	View file
drivers/tty/hvc/hvc_console.c	modified	+7	−2	View file
drivers/tty/hvc/hvc_irq.c	modified	+1	−1	View file
drivers/tty/hvc/hvcs.c	modified	+2	−2	View file
drivers/tty/hvc/hvsi.c	modified	+1	−1	View file
drivers/tty/isicom.c	modified	+1	−1	View file
drivers/tty/mxser.c	modified	+1	−12	View file
drivers/tty/n_gsm.c	modified	+40	−30	View file
drivers/tty/pty.c	modified	+16	−10	View file
drivers/tty/serial/68328serial.c	modified	+1	−36	View file
drivers/tty/serial/68328serial.h	modified	+0	−1	View file
drivers/tty/serial/8250.c	modified	+57	−75	View file
drivers/tty/serial/8250_dw.c	added	+194	−0	View file
drivers/tty/serial/8250_pci.c	modified	+42	−0	View file
drivers/tty/serial/Kconfig	modified	+10	−20	View file
drivers/tty/serial/Makefile	modified	+2	−2	View file
drivers/tty/serial/altera_jtaguart.c	modified	+1	−1	View file
drivers/tty/serial/altera_uart.c	modified	+1	−1	View file
drivers/tty/serial/apbuart.c	modified	+1	−0	View file
drivers/tty/serial/atmel_serial.c	modified	+111	−17	View file
drivers/tty/serial/bfin_sport_uart.c	modified	+1	−1	View file
drivers/tty/serial/bfin_5xx.c → drivers/tty/serial/bfin_uart.c	renamed	+40	−25	View file
drivers/tty/serial/cpm_uart/cpm_uart_core.c	modified	+1	−0	View file
drivers/tty/serial/crisv10.c	modified	+15	−15	View file
drivers/tty/serial/dz.c	modified	+1	−0	View file
drivers/tty/serial/icom.c	modified	+1	−1	View file
drivers/tty/serial/imx.c	modified	+7	−3	View file
drivers/tty/serial/ioc3_serial.c	modified	+1	−0	View file
drivers/tty/serial/ioc4_serial.c	modified	+1	−0	View file
drivers/tty/serial/jsm/jsm.h	modified	+0	−10	View file
drivers/tty/serial/jsm/jsm_driver.c	modified	+0	−19	View file
drivers/tty/serial/jsm/jsm_neo.c	modified	+15	−14	View file
drivers/tty/serial/jsm/jsm_tty.c	modified	+13	−81	View file
drivers/tty/serial/lantiq.c	modified	+3	−3	View file
drivers/tty/serial/m32r_sio.c	modified	+1	−0	View file
drivers/tty/serial/max3100.c	modified	+2	−0	View file
drivers/tty/serial/max3107.c	modified	+2	−0	View file
drivers/tty/serial/mcf.c	modified	+1	−1	View file
drivers/tty/serial/mfd.c	modified	+48	−1	View file
drivers/tty/serial/mpc52xx_uart.c	modified	+2	−1	View file
drivers/tty/serial/mrst_max3110.c	modified	+54	−61	View file
drivers/tty/serial/mrst_max3110.h	modified	+1	−0	View file
drivers/tty/serial/msm_serial.c	modified	+0	−2	View file
drivers/tty/serial/msm_serial_hs.c	modified	+2	−0	View file
drivers/tty/serial/mux.c	modified	+2	−0	View file
drivers/tty/serial/nwpserial.c	modified	+1	−0	View file
drivers/tty/serial/pch_uart.c	modified	+2	−0	View file
drivers/tty/serial/pxa.c	modified	+20	−0	View file
drivers/tty/serial/samsung.c	modified	+95	−12	View file
drivers/tty/serial/samsung.h	modified	+1	−0	View file
drivers/tty/serial/sb1250-duart.c	modified	+1	−0	View file
drivers/tty/serial/serial_core.c	modified	+21	−51	View file
drivers/tty/serial/serial_ks8695.c	modified	+5	−4	View file
drivers/tty/serial/serial_txx9.c	modified	+2	−0	View file
drivers/tty/serial/sh-sci.c	modified	+1	−1	View file
drivers/tty/serial/sn_console.c	modified	+2	−1	View file
drivers/tty/serial/timbuart.c	modified	+2	−0	View file
drivers/tty/serial/uartlite.c	modified	+1	−0	View file
drivers/tty/serial/ucc_uart.c	modified	+3	−1	View file
drivers/tty/serial/xilinx_uartps.c	modified	+3	−1	View file
drivers/tty/serial/zs.c	modified	+1	−0	View file
drivers/tty/synclink.c	modified	+0	−1	View file
drivers/tty/synclinkmp.c	modified	+3	−3	View file
drivers/tty/tty_io.c	modified	+38	−12	View file
drivers/tty/tty_ioctl.c	modified	+17	−0	View file
drivers/tty/tty_ldisc.c	modified	+0	−1	View file
drivers/tty/tty_mutex.c	modified	+0	−12	View file
drivers/tty/tty_port.c	modified	+1	−1	View file
drivers/tty/vt/keyboard.c	modified	+2	−1	View file
drivers/tty/vt/selection.c	modified	+2	−2	View file
drivers/tty/vt/vt.c	modified	+1	−1	View file
include/linux/serial.h	modified	+1	−0	View file
include/linux/serial_8250.h	modified	+2	−0	View file
include/linux/serial_core.h	modified	+5	−5	View file
include/linux/serial_reg.h	modified	+1	−0	View file
include/linux/tty.h	modified	+23	−3	View file
net/irda/ircomm/ircomm_tty.c	modified	+1	−1	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/serial/rs485.txt

View file

diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt
new file mode 100644
index 0000000..1e753c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rs485.txt
@@ -0,0 +1,31 @@
+* RS485 serial communications
+
+The RTS signal is capable of automatically controlling line direction for
+the built-in half-duplex mode.
+The properties described hereafter shall be given to a half-duplex capable
+UART node.
+
+Required properties:
+- rs485-rts-delay: prop-encoded-array <a b> where:
+  * a is the delay beteween rts signal and beginning of data sent in milliseconds.
+      it corresponds to the delay before sending data.
+  * b is the delay between end of data sent and rts signal in milliseconds
+      it corresponds to the delay after sending data and actual release of the line.
+
+Optional properties:
+- linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485
+  feature at boot time. It can be disabled later with proper ioctl.
+- rs485-rx-during-tx: empty property that enables the receiving of data even
+  whilst sending data.
+
+RS485 example for Atmel USART:
+	usart0: serial@fff8c000 {
+		compatible = "atmel,at91sam9260-usart";
+		reg = <0xfff8c000 0x4000>;
+		interrupts = <7>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-delay = <0 200>;		// in milliseconds
+	};
+

Documentation/devicetree/bindings/tty/serial/atmel-usart.txt

View file

diff --git a/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt b/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt
new file mode 100644
index 0000000..a49d9a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt
@@ -0,0 +1,27 @@
+* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-usart"
+  The compatible <chip> indicated will be the first SoC to support an
+  additional mode or an USART new feature.
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+
+Optional properties:
+- atmel,use-dma-rx: use of PDC or DMA for receiving data
+- atmel,use-dma-tx: use of PDC or DMA for transmitting data
+
+<chip> compatible description:
+- at91rm9200:  legacy USART support
+- at91sam9260: generic USART implementation for SAM9 SoCs
+
+Example:
+
+	usart0: serial@fff8c000 {
+		compatible = "atmel,at91sam9260-usart";
+		reg = <0xfff8c000 0x4000>;
+		interrupts = <7>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+	};
+

Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt

View file

diff --git a/Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt
new file mode 100644
index 0000000..f13f1c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt
@@ -0,0 +1,25 @@
+* Synopsys DesignWare ABP UART
+
+Required properties:
+- compatible : "snps,dw-apb-uart"
+- reg : offset and length of the register set for the device.
+- interrupts : should contain uart interrupt.
+- clock-frequency : the input clock frequency for the UART.
+
+Optional properties:
+- reg-shift : quantity to shift the register offsets by.  If this property is
+  not present then the register offsets are not shifted.
+- reg-io-width : the size (in bytes) of the IO accesses that should be
+  performed on the device.  If this property is not present then single byte
+  accesses are used.
+
+Example:
+
+	uart@80230000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x80230000 0x100>;
+		clock-frequency = <3686400>;
+		interrupts = <10>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};

Documentation/serial/serial-rs485.txt

View file

diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
index a493238..079cb3d 100644
--- a/Documentation/serial/serial-rs485.txt
+++ b/Documentation/serial/serial-rs485.txt
@@ -28,6 +28,10 @@
    RS485 communications. This data structure is used to set and configure RS485
    parameters in the platform data and in ioctls.
 
+   The device tree can also provide RS485 boot time parameters (see [2]
+   for bindings). The driver is in charge of filling this data structure from
+   the values given by the device tree.
+
    Any driver for devices capable of working both as RS232 and RS485 should
    provide at least the following ioctls:
 
@@ -104,6 +108,9 @@
 	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
 	rs485conf.delay_rts_after_send = ...;
 
+	/* Set this flag if you want to receive data even whilst sending data */
+	rs485conf.flags |= SER_RS485_RX_DURING_TX;
+
 	if (ioctl (fd, TIOCSRS485, &rs485conf) < 0) {
 		/* Error handling. See errno. */
 	}
@@ -118,3 +125,4 @@
 5. REFERENCES
 
  [1]	include/linux/serial.h
+ [2]	Documentation/devicetree/bindings/serial/rs485.txt

arch/arm/Kconfig

View file

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7536b9c..795126e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -727,7 +727,6 @@ config ARCH_S3C64XX
 	select ARCH_REQUIRE_GPIOLIB
 	select SAMSUNG_CLKSRC
 	select SAMSUNG_IRQ_VIC_TIMER
-	select SAMSUNG_IRQ_UART
 	select S3C_GPIO_TRACK
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX

arch/arm/mach-s3c64xx/dev-uart.c

View file

diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index f797f74..c681b99 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -37,21 +37,10 @@ static struct resource s3c64xx_uart0_resource[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_S3CUART_RX0,
-		.end	= IRQ_S3CUART_RX0,
+		.start	= IRQ_UART0,
+		.end	= IRQ_UART0,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX0,
-		.end	= IRQ_S3CUART_TX0,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR0,
-		.end	= IRQ_S3CUART_ERR0,
-		.flags	= IORESOURCE_IRQ,
-	}
 };
 
 static struct resource s3c64xx_uart1_resource[] = {
@@ -61,19 +50,8 @@ static struct resource s3c64xx_uart1_resource[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_S3CUART_RX1,
-		.end	= IRQ_S3CUART_RX1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX1,
-		.end	= IRQ_S3CUART_TX1,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR1,
-		.end	= IRQ_S3CUART_ERR1,
+		.start	= IRQ_UART1,
+		.end	= IRQ_UART1,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -85,19 +63,8 @@ static struct resource s3c6xx_uart2_resource[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_S3CUART_RX2,
-		.end	= IRQ_S3CUART_RX2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX2,
-		.end	= IRQ_S3CUART_TX2,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR2,
-		.end	= IRQ_S3CUART_ERR2,
+		.start	= IRQ_UART2,
+		.end	= IRQ_UART2,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -109,19 +76,8 @@ static struct resource s3c64xx_uart3_resource[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_S3CUART_RX3,
-		.end	= IRQ_S3CUART_RX3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX3,
-		.end	= IRQ_S3CUART_TX3,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR3,
-		.end	= IRQ_S3CUART_ERR3,
+		.start	= IRQ_UART3,
+		.end	= IRQ_UART3,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

arch/arm/mach-s3c64xx/include/mach/irqs.h

View file

diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index c026f67..443f85b 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -27,36 +27,6 @@
 #define IRQ_VIC0_BASE	S3C_IRQ(0)
 #define IRQ_VIC1_BASE	S3C_IRQ(32)
 
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0	(16)
-#define IRQ_S3CUART_BASE1	(20)
-#define IRQ_S3CUART_BASE2	(24)
-#define IRQ_S3CUART_BASE3	(28)
-
-#define UART_IRQ_RXD		(0)
-#define UART_IRQ_ERR		(1)
-#define UART_IRQ_TXD		(2)
-#define UART_IRQ_MODEM		(3)
-
-#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
 /* VIC based IRQs */
 
 #define S3C64XX_IRQ_VIC0(x)	(IRQ_VIC0_BASE + (x))

arch/arm/mach-s3c64xx/irq.c

View file

diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
index 75d9a0e..b07357e 100644
--- a/arch/arm/mach-s3c64xx/irq.c
+++ b/arch/arm/mach-s3c64xx/irq.c
@@ -25,29 +25,6 @@
 #include <plat/irq-uart.h>
 #include <plat/cpu.h>
 
-static struct s3c_uart_irq uart_irqs[] = {
-	[0] = {
-		.regs		= S3C_VA_UART0,
-		.base_irq	= IRQ_S3CUART_BASE0,
-		.parent_irq	= IRQ_UART0,
-	},
-	[1] = {
-		.regs		= S3C_VA_UART1,
-		.base_irq	= IRQ_S3CUART_BASE1,
-		.parent_irq	= IRQ_UART1,
-	},
-	[2] = {
-		.regs		= S3C_VA_UART2,
-		.base_irq	= IRQ_S3CUART_BASE2,
-		.parent_irq	= IRQ_UART2,
-	},
-	[3] = {
-		.regs		= S3C_VA_UART3,
-		.base_irq	= IRQ_S3CUART_BASE3,
-		.parent_irq	= IRQ_UART3,
-	},
-};
-
 /* setup the sources the vic should advertise resume for, even though it
  * is not doing the wake (set_irq_wake needs to be valid) */
 #define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
@@ -67,6 +44,4 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 
 	/* add the timer sub-irqs */
 	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-
-	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
 }

arch/arm/plat-s5p/Kconfig

View file

diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9843c95..9a197e5 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -22,7 +22,6 @@ config PLAT_S5P
 	select PLAT_SAMSUNG
 	select SAMSUNG_CLKSRC
 	select SAMSUNG_IRQ_VIC_TIMER
-	select SAMSUNG_IRQ_UART
 	help
 	  Base platform code for Samsung's S5P series SoC.
 

arch/arm/plat-s5p/dev-uart.c

View file

diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index afaf87f..c9308db 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -32,20 +32,10 @@ static struct resource s5p_uart0_resource[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_S5P_UART_RX0,
-		.end	= IRQ_S5P_UART_RX0,
+		.start	= IRQ_UART0,
+		.end	= IRQ_UART0,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= IRQ_S5P_UART_TX0,
-		.end	= IRQ_S5P_UART_TX0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= IRQ_S5P_UART_ERR0,
-		.end	= IRQ_S5P_UART_ERR0,
-		.flags	= IORESOURCE_IRQ,
-	}
 };
 
 static struct resource s5p_uart1_resource[] = {
@@ -55,18 +45,8 @@ static struct resource s5p_uart1_resource[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_S5P_UART_RX1,
-		.end	= IRQ_S5P_UART_RX1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S5P_UART_TX1,
-		.end	= IRQ_S5P_UART_TX1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= IRQ_S5P_UART_ERR1,
-		.end	= IRQ_S5P_UART_ERR1,
+		.start	= IRQ_UART1,
+		.end	= IRQ_UART1,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -78,18 +58,8 @@ static struct resource s5p_uart2_resource[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_S5P_UART_RX2,
-		.end	= IRQ_S5P_UART_RX2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S5P_UART_TX2,
-		.end	= IRQ_S5P_UART_TX2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= IRQ_S5P_UART_ERR2,
-		.end	= IRQ_S5P_UART_ERR2,
+		.start	= IRQ_UART2,
+		.end	= IRQ_UART2,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -102,18 +72,8 @@ static struct resource s5p_uart3_resource[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_S5P_UART_RX3,
-		.end	= IRQ_S5P_UART_RX3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S5P_UART_TX3,
-		.end	= IRQ_S5P_UART_TX3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= IRQ_S5P_UART_ERR3,
-		.end	= IRQ_S5P_UART_ERR3,
+		.start	= IRQ_UART3,
+		.end	= IRQ_UART3,
 		.flags	= IORESOURCE_IRQ,
 	},
 #endif
@@ -127,18 +87,8 @@ static struct resource s5p_uart4_resource[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_S5P_UART_RX4,
-		.end	= IRQ_S5P_UART_RX4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S5P_UART_TX4,
-		.end	= IRQ_S5P_UART_TX4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= IRQ_S5P_UART_ERR4,
-		.end	= IRQ_S5P_UART_ERR4,
+		.start	= IRQ_UART4,
+		.end	= IRQ_UART4,
 		.flags	= IORESOURCE_IRQ,
 	},
 #endif
@@ -152,18 +102,8 @@ static struct resource s5p_uart5_resource[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_S5P_UART_RX5,
-		.end	= IRQ_S5P_UART_RX5,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S5P_UART_TX5,
-		.end	= IRQ_S5P_UART_TX5,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= IRQ_S5P_UART_ERR5,
-		.end	= IRQ_S5P_UART_ERR5,
+		.start	= IRQ_UART5,
+		.end	= IRQ_UART5,
 		.flags	= IORESOURCE_IRQ,
 	},
 #endif

arch/arm/plat-s5p/include/plat/irqs.h

View file

diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index ba9121c..144dbfc 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -37,41 +37,6 @@
 #define IRQ_VIC1_BASE		S5P_VIC1_BASE
 #define IRQ_VIC2_BASE		S5P_VIC2_BASE
 
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S5P_UART_BASE0	(16)
-#define IRQ_S5P_UART_BASE1	(20)
-#define IRQ_S5P_UART_BASE2	(24)
-#define IRQ_S5P_UART_BASE3	(28)
-
-#define UART_IRQ_RXD		(0)
-#define UART_IRQ_ERR		(1)
-#define UART_IRQ_TXD		(2)
-
-#define IRQ_S5P_UART_RX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR0	(IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR1	(IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR2	(IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR3	(IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
-
-/* S3C compatibilty defines */
-#define IRQ_S3CUART_RX0		IRQ_S5P_UART_RX0
-#define IRQ_S3CUART_RX1		IRQ_S5P_UART_RX1
-#define IRQ_S3CUART_RX2		IRQ_S5P_UART_RX2
-#define IRQ_S3CUART_RX3		IRQ_S5P_UART_RX3
-
 /* VIC based IRQs */
 
 #define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))

arch/arm/plat-s5p/irq.c

View file

diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
index a97c089..afdaa10 100644
--- a/arch/arm/plat-s5p/irq.c
+++ b/arch/arm/plat-s5p/irq.c
@@ -17,42 +17,10 @@
 
 #include <asm/hardware/vic.h>
 
-#include <linux/serial_core.h>
 #include <mach/map.h>
 #include <plat/regs-timer.h>
-#include <plat/regs-serial.h>
 #include <plat/cpu.h>
 #include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-
-/*
- * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct s3c_uart_irq uart_irqs[] = {
-	[0] = {
-		.regs		= S5P_VA_UART0,
-		.base_irq	= IRQ_S5P_UART_BASE0,
-		.parent_irq	= IRQ_UART0,
-	},
-	[1] = {
-		.regs		= S5P_VA_UART1,
-		.base_irq	= IRQ_S5P_UART_BASE1,
-		.parent_irq	= IRQ_UART1,
-	},
-	[2] = {
-		.regs		= S5P_VA_UART2,
-		.base_irq	= IRQ_S5P_UART_BASE2,
-		.parent_irq	= IRQ_UART2,
-	},
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
-	[3] = {
-		.regs		= S5P_VA_UART3,
-		.base_irq	= IRQ_S5P_UART_BASE3,
-		.parent_irq	= IRQ_UART3,
-	},
-#endif
-};
 
 void __init s5p_init_irq(u32 *vic, u32 num_vic)
 {
@@ -65,6 +33,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
 #endif
 
 	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-
-	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
 }

arch/arm/plat-samsung/Kconfig

View file

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b3e1065..dffa37b 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -65,11 +65,6 @@ config SAMSUNG_IRQ_VIC_TIMER
        help
          Internal configuration to build the VIC timer interrupt code.
 
-config SAMSUNG_IRQ_UART
-       bool
-       help
-         Internal configuration to build the IRQ UART demux code.
-
 # options for gpio configuration support
 
 config SAMSUNG_GPIOLIB_4BIT

arch/arm/plat-samsung/Makefile

View file

diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 853764b..1105922 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -21,7 +21,6 @@ obj-y				+= dev-asocdma.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
 
-obj-$(CONFIG_SAMSUNG_IRQ_UART)	+= irq-uart.o
 obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
 
 # ADC

arch/arm/plat-samsung/include/plat/regs-serial.h

View file

diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index bac36fa..7207348 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -186,6 +186,11 @@
 #define S3C64XX_UINTSP		0x34
 #define S3C64XX_UINTM		0x38
 
+#define S3C64XX_UINTM_RXD	(0)

This diff is incomplete. Download the complete patch.