diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c index 2d6a08c..2961e53 100644 --- a/drivers/ata/ahci_ceva.c +++ b/drivers/ata/ahci_ceva.c @@ -211,7 +211,7 @@ static int ceva_ahci_platform_enable_resources(struct ahci_host_priv *hpriv) rc = phy_init(hpriv->phys[i]); if (rc) - goto disable_rsts; + goto exit_phys; } /* De-assert the controller reset */ @@ -230,14 +230,24 @@ static int ceva_ahci_platform_enable_resources(struct ahci_host_priv *hpriv) return 0; -disable_rsts: - ahci_platform_deassert_rsts(hpriv); - disable_phys: while (--i >= 0) { + if (ahci_ignore_port(hpriv, i)) + continue; + phy_power_off(hpriv->phys[i]); phy_exit(hpriv->phys[i]); } + ahci_platform_assert_rsts(hpriv); + goto disable_clks; + +exit_phys: + while (--i >= 0) { + if (ahci_ignore_port(hpriv, i)) + continue; + + phy_exit(hpriv->phys[i]); + } disable_clks: ahci_platform_disable_clks(hpriv); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c43bd28..961d03f 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4414,6 +4414,15 @@ static const struct ata_dev_quirks_entry __ata_dev_quirks[] = { { "WDC WD3200JD-*", NULL, ATA_QUIRK_WD_BROKEN_LPM }, /* + * WD drives with LPM issues (irrespective of supported SATA speeds). + * (Unlike ATA_QUIRK_WD_BROKEN_LPM, which is only applied if the drive + * exposes SATA Gen1 speed support, and SATA Gen1 speed support only.) + */ + { "WDC WD100EFGX-68CPLN0", NULL, ATA_QUIRK_NOLPM }, + { "WDC WD102KFBX-68M95N0", NULL, ATA_QUIRK_NOLPM }, + { "WD Green 2.5 480GB", NULL, ATA_QUIRK_NOLPM }, + + /* * This sata dom device goes on a walkabout when the ATA_LOG_DIRECTORY * log page is accessed. Ensure we never ask for this log page with * these devices. diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 05df7ea..c154103 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -106,6 +106,12 @@ static const unsigned int ata_eh_flush_timeouts[] = { UINT_MAX, }; +static const unsigned int ata_eh_standby_timeouts[] = { + 15000, /* Some drives may be slow to standby */ + /* but don't hold up a suspend too long waiting for them */ + UINT_MAX, +}; + static const unsigned int ata_eh_other_timeouts[] = { 5000, /* same rationale as identify timeout */ 10000, /* ditto */ @@ -147,6 +153,8 @@ ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = { .timeouts = ata_eh_other_timeouts, }, { .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT), .timeouts = ata_eh_flush_timeouts }, + { .commands = CMDS(ATA_CMD_STANDBYNOW1), + .timeouts = ata_eh_standby_timeouts }, { .commands = CMDS(ATA_CMD_VERIFY), .timeouts = ata_eh_reset_timeouts }, }; @@ -650,29 +658,12 @@ int ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, set_host_byte(scmd, DID_OK); ata_qc_for_each_raw(ap, qc, i) { - if (qc->scsicmd != scmd) - continue; - if ((qc->flags & ATA_QCFLAG_ACTIVE) || - qc == qc->dev->link->deferred_qc) + if (qc->scsicmd == scmd && + qc->flags & ATA_QCFLAG_ACTIVE) break; } - if (i < ATA_MAX_QUEUE && qc == qc->dev->link->deferred_qc) { - /* - * This is a deferred command that timed out while - * waiting for the command queue to drain. Since the qc - * is not active yet (deferred_qc is still set, so the - * deferred qc work has not issued the command yet), - * simply signal the timeout by finishing the SCSI - * command and clear the deferred qc to prevent the - * deferred qc work from issuing this qc. - */ - WARN_ON_ONCE(qc->flags & ATA_QCFLAG_ACTIVE); - qc->dev->link->deferred_qc = NULL; - cancel_work(&qc->dev->link->deferred_qc_work); - set_host_byte(scmd, DID_TIME_OUT); - scsi_eh_finish_cmd(scmd, &ap->eh_done_q); - } else if (i < ATA_MAX_QUEUE) { + if (i < ATA_MAX_QUEUE) { /* the scmd has an associated qc */ if (!(qc->flags & ATA_QCFLAG_EH)) { /* which hasn't failed yet, timeout */ @@ -948,10 +939,10 @@ static void ata_eh_set_pending(struct ata_port *ap, bool fastdrain) ap->pflags |= ATA_PFLAG_EH_PENDING; /* - * If we have a deferred qc, requeue it so that it is retried once EH - * completes. + * If we have deferred QCs, requeue them so that the SCSI EH task can + * run. */ - ata_scsi_requeue_deferred_qc(ap); + ata_scsi_requeue_deferred_qc(ap, NULL); if (!fastdrain) return; diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index b0706c3..ad40f51 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -913,7 +913,7 @@ static bool ata_scsi_lpm_supported(struct ata_port *ap) return false; ata_for_each_link(link, ap, EDGE) { - ata_for_each_dev(dev, &ap->link, ENABLED) { + ata_for_each_dev(dev, link, ENABLED) { if (dev->quirks & ATA_QUIRK_NOLPM) return false; } diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 5868526..d2160ee 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1685,26 +1685,80 @@ void ata_scsi_deferred_qc_work(struct work_struct *work) spin_unlock_irqrestore(ap->lock, flags); } -void ata_scsi_requeue_deferred_qc(struct ata_port *ap) +enum scsi_timeout_action ata_scsi_requeue_deferred_qc(struct ata_port *ap, + struct scsi_cmnd *timedout_scmd) { + enum scsi_timeout_action action = SCSI_EH_NOT_HANDLED; + struct ata_queued_cmd *qc; struct ata_link *link; + u32 host_byte; lockdep_assert_held(ap->lock); /* - * If we have a deferred qc when a reset occurs or NCQ commands fail, - * do not try to be smart about what to do with this deferred command - * and simply requeue it by completing it with DID_REQUEUE. + * If we have deferred QCs when a reset, a timeout or an NCQ command + * fails, do not try to be smart about what to do with the deferred + * commands and simply terminate them and let the SCSI layer decide + * what to do. */ ata_for_each_link(link, ap, PMP_FIRST) { - struct ata_queued_cmd *qc = link->deferred_qc; + qc = link->deferred_qc; + if (!qc) + continue; - if (qc) { - link->deferred_qc = NULL; - cancel_work(&link->deferred_qc_work); - ata_scsi_qc_done(qc, true, DID_REQUEUE << 16); + /* + * Clear the deferred QC so that the deferred work does not try + * to issue it. + */ + link->deferred_qc = NULL; + cancel_work(&link->deferred_qc_work); + + /* + * We are going to complete some scsi command, either with + * DID_TIME_OUT if the command timed out while waiting for being + * issued, or with DID_REQUEUE if another command timed out or + * we had a failed command. However, the block layer may re-issue + * these commands immediately, keeping the scsi host busy and + * thus preventing the SCSI EH task from running. + * So schedule EH on the port to prevent accepting new commands + * until everything is sorted out with the error or timeout that + * got us here in the first place. Note that we set EH pending + * on the port before calling ata_port_schedule_eh() so that we + * do not reenter this function from ata_eh_set_pending() with + * timedout_scmd being NULL and erroneously retry deferred QCs + * that have timed out on other links. + */ + if (!ata_port_eh_scheduled(ap)) { + ap->pflags |= ATA_PFLAG_EH_PENDING; + ata_port_schedule_eh(ap); } + + /* + * If we are being called from scsi_timeout(), then we have a + * non-NULL timedout_scmd. If the timed out command is for a + * deferred QC, terminate that deferred QC with DID_TIME_OUT and + * requeue all other deferred QCs. In this case we need to + * return SCSI_EH_DONE, because the timed out command was + * handled. + * If the timed out command is not for a deferred QC, we need to + * requeue all deferred QCs, and return SCSI_EH_NOT_HANDLED so + * that the timed out command gets added to the EH work queue + * with scsi_eh_scmd_add(), for later handling with libata EH + * ata_scsi_cmd_error_handler(). + * If timedout_scmd is NULL, we simply need to requeue all + * deferred QCs and the return value does not matter as we were + * not called from scsi_timeout(). + */ + if (timedout_scmd && qc->scsicmd == timedout_scmd) { + host_byte = DID_TIME_OUT; + action = SCSI_EH_DONE; + } else { + host_byte = DID_REQUEUE; + } + ata_scsi_qc_done(qc, true, host_byte << 16); } + + return action; } static void ata_scsi_schedule_deferred_qc(struct ata_link *link) @@ -1723,13 +1777,42 @@ static void ata_scsi_schedule_deferred_qc(struct ata_link *link) return; if (ata_port_eh_scheduled(ap)) { - ata_scsi_requeue_deferred_qc(ap); + ata_scsi_requeue_deferred_qc(ap, NULL); return; } if (!ap->ops->qc_defer(qc)) queue_work(system_highpri_wq, &link->deferred_qc_work); } +enum scsi_timeout_action ata_scsi_retry_deferred_qc(struct ata_port *ap, + struct scsi_cmnd *scmd) +{ + enum scsi_timeout_action action; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + action = ata_scsi_requeue_deferred_qc(ap, scmd); + spin_unlock_irqrestore(ap->lock, flags); + + return action; +} +EXPORT_SYMBOL_GPL(ata_scsi_retry_deferred_qc); + +enum scsi_timeout_action ata_scsi_eh_timed_out(struct scsi_cmnd *scmd) +{ + struct ata_port *ap = ata_shost_to_port(scmd->device->host); + + /* + * ata_scsi_cmd_error_handler() takes care of commands that timed out + * while executing. However, if we have deferred QCs while a timeout + * triggers, we must requeue these commands for retry so that we do not + * unnecessarily delay starting the SCSI EH task until these deferred + * commands also time out. + */ + return ata_scsi_retry_deferred_qc(ap, scmd); +} +EXPORT_SYMBOL_GPL(ata_scsi_eh_timed_out); + static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) { struct ata_link *link = qc->dev->link; @@ -2911,6 +2994,7 @@ static void atapi_fixup_inquiry(struct scsi_cmnd *cmd) static void atapi_qc_complete(struct ata_queued_cmd *qc) { + struct ata_link *link = qc->dev->link; struct scsi_cmnd *cmd = qc->scsicmd; unsigned int err_mask = qc->err_mask; @@ -2936,8 +3020,16 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev) qc->dev->sdev->locked = 0; - ata_scsi_qc_done(qc, true, SAM_STAT_CHECK_CONDITION); - return; + if (cmd->result) + ata_scsi_qc_done(qc, false, 0); + else + ata_scsi_qc_done(qc, true, SAM_STAT_CHECK_CONDITION); + goto schedule_deferred; + } + + if (cmd->result) { + ata_scsi_qc_done(qc, false, 0); + goto schedule_deferred; } /* successful completion path */ @@ -2945,6 +3037,9 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) atapi_fixup_inquiry(cmd); ata_scsi_qc_done(qc, true, SAM_STAT_GOOD); + +schedule_deferred: + ata_scsi_schedule_deferred_qc(link); } /** * atapi_xlat - Initialize PACKET taskfile diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 7006275..8dacc1d 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -180,7 +180,8 @@ enum scsi_qc_status __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_port *ap) __must_hold(ap->lock); void ata_scsi_deferred_qc_work(struct work_struct *work); -void ata_scsi_requeue_deferred_qc(struct ata_port *ap); +enum scsi_timeout_action ata_scsi_requeue_deferred_qc(struct ata_port *ap, + struct scsi_cmnd *scmd); /* libata-eh.c */ extern unsigned int ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 41647a5..3654543 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4027,7 +4027,7 @@ static int mv_platform_probe(struct platform_device *pdev) /* * Simple resource validation .. */ - if (unlikely(pdev->num_resources != 1)) { + if (unlikely(pdev->num_resources != 1 && pdev->num_resources != 2)) { dev_err(&pdev->dev, "invalid number of resources\n"); return -EINVAL; } diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index c832827..97ac3db 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -502,6 +502,21 @@ int sas_eh_target_reset_handler(struct scsi_cmnd *cmd) } EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler); +/* + * Handle deferred QCs in case of a command timeout. + * See ata_scsi_eh_timed_out() for details. + */ +enum scsi_timeout_action sas_eh_timed_out(struct scsi_cmnd *cmd) +{ + struct domain_device *dev = cmd_to_domain_dev(cmd); + + if (dev_is_sata(dev)) + return ata_scsi_retry_deferred_qc(dev->sata_dev.ap, cmd); + + return SCSI_EH_NOT_HANDLED; +} +EXPORT_SYMBOL_GPL(sas_eh_timed_out); + /* Try to reset a device */ static int try_to_reset_cmd_device(struct scsi_cmnd *cmd) { diff --git a/include/linux/ata.h b/include/linux/ata.h index 8fd48bc..7daad4c 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -762,8 +762,7 @@ static inline bool ata_id_sense_reporting_enabled(const u16 *id) return id[ATA_ID_COMMAND_SET_4] & BIT(6); } -/** - * +/* * Word: 206 - SCT Command Transport * 15:12 - Vendor Specific * 11:6 - Reserved @@ -810,8 +809,9 @@ static inline bool ata_id_sct_supported(const u16 *id) * * The practical impact of this is that ata_id_major_version cannot * reliably report on drives below ATA3. + * + * Returns: major version of ATA drive level or %0 if unknown */ - static inline unsigned int ata_id_major_version(const u16 *id) { unsigned int mver; diff --git a/include/linux/libata.h b/include/linux/libata.h index 96e626d..1827502 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -425,7 +425,7 @@ enum { /* This should match the actual table size of * ata_eh_cmd_timeout_table in libata-eh.c. */ - ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 8, + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 9, /* User visible DMA mask for DMA control. DO NOT renumber. */ ATA_DMA_MASK_ATA = (1 << 0), /* DMA on ATA Disk */ @@ -1153,6 +1153,9 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, #endif extern enum scsi_qc_status ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); +enum scsi_timeout_action ata_scsi_retry_deferred_qc(struct ata_port *ap, + struct scsi_cmnd *scmd); +enum scsi_timeout_action ata_scsi_eh_timed_out(struct scsi_cmnd *cmd); #if IS_REACHABLE(CONFIG_ATA) bool ata_scsi_dma_need_drain(struct request *rq); #else @@ -1464,6 +1467,7 @@ extern const struct attribute_group *ata_common_sdev_groups[]; .ioctl = ata_scsi_ioctl, \ ATA_SCSI_COMPAT_IOCTL \ .queuecommand = ata_scsi_queuecmd, \ + .eh_timed_out = ata_scsi_eh_timed_out, \ .dma_need_drain = ata_scsi_dma_need_drain, \ .this_id = ATA_SHT_THIS_ID, \ .emulated = ATA_SHT_EMULATED, \ diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 163f23c..c7017ae 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -705,6 +705,7 @@ void sas_task_abort(struct sas_task *); int sas_eh_abort_handler(struct scsi_cmnd *cmd); int sas_eh_device_reset_handler(struct scsi_cmnd *cmd); int sas_eh_target_reset_handler(struct scsi_cmnd *cmd); +enum scsi_timeout_action sas_eh_timed_out(struct scsi_cmnd *cmd); extern void sas_target_destroy(struct scsi_target *); extern int sas_sdev_init(struct scsi_device *); @@ -743,6 +744,7 @@ void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event, .this_id = -1, \ .eh_device_reset_handler = sas_eh_device_reset_handler, \ .eh_target_reset_handler = sas_eh_target_reset_handler, \ + .eh_timed_out = sas_eh_timed_out, \ .target_destroy = sas_target_destroy, \ .ioctl = sas_ioctl, \