Merge tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Merge commit. Changes below are compared with the first parent: d5cbd9f3.
Changes
34 files changed · +4970 −339
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
View filediff --git a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
index d3bca60..4a1e3e3 100644
--- a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
+++ b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
@@ -75,7 +75,7 @@ examples:
interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
regulators {
- LDO1 {
+ ldo1m {
regulator-name = "vdd_ldo1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
@@ -84,7 +84,7 @@ examples:
// ...
- BUCK1 {
+ buck8m {
regulator-name = "vdd_mif";
regulator-min-microvolt = <450000>;
regulator-max-microvolt = <1300000>;
Documentation/devicetree/bindings/mfd/samsung,s2mpg10-pmic.yaml
View filediff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpg10-pmic.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpg10-pmic.yaml
new file mode 100644
index 0000000..0ea1a44
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpg10-pmic.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mpg10-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPG10 Power Management IC
+
+maintainers:
+ - André Draszik <[email protected]>
+
+description: |
+ This is part of the device tree bindings for the S2MPG10 Power Management IC
+ (PMIC).
+
+ The Samsung S2MPG10 is a Power Management IC for mobile applications with buck
+ converters, various LDOs, power meters, RTC, clock outputs, and additional
+ GPIO interfaces and is typically complemented by S2MPG10 PMIC in a main/sub
+ configuration as the main PMIC.
+
+properties:
+ compatible:
+ const: samsung,s2mpg10-pmic
+
+ clocks:
+ $ref: /schemas/clock/samsung,s2mps11.yaml
+ description:
+ Child node describing clock provider.
+
+ interrupts:
+ maxItems: 1
+
+ regulators:
+ type: object
+ $ref: /schemas/regulator/samsung,s2mpg10-regulator.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+ system-power-controller: true
+
+ wakeup-source: true
+
+patternProperties:
+ "^vinb([1-9]|10)m-supply$":
+ description:
+ Phandle to the power supply for each buck rail of this PMIC. There is a
+ 1:1 mapping of supply to rail, e.g. vinb1m-supply supplies buck1m.
+
+ "^vinl([1-9]|1[0-5])m-supply$":
+ description: |
+ Phandle to the power supply for one or multiple LDO rails of this PMIC.
+ The mapping of supply to rail(s) is as follows:
+ vinl1m - ldo13m
+ vinl2m - ldo15m
+ vinl3m - ldo1m, ldo5m, ldo7m
+ vinl4m - ldo3m, ldo8m
+ vinl5m - ldo16m
+ vinl6m - ldo17m
+ vinl7m - ldo6m, ldo11m, ldo24m, ldo28m
+ vinl8m - ldo12m
+ vinl9m - ldo2m, ldo4m
+ vinl10m - ldo9m, ldo14m, ldo18m, 19m, ldo20m, ldo25m
+ vinl11m - ldo23m, ldo31m
+ vinl12m - ldo29m
+ vinl13m - ldo30m
+ vinl14m - ldo21m
+ vinl15m - ldo10m, ldo22m, ldo26m, ldo27m
+
+required:
+ - compatible
+ - interrupts
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/samsung,s2mpg10-regulator.h>
+
+ pmic {
+ compatible = "samsung,s2mpg10-pmic";
+ interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ system-power-controller;
+ wakeup-source;
+
+ vinl3m-supply = <&buck8m>;
+
+ clocks {
+ compatible = "samsung,s2mpg10-clk";
+ #clock-cells = <1>;
+ clock-output-names = "rtc32k_ap", "peri32k1", "peri32k2";
+ };
+
+ regulators {
+ buck8m {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <450000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <6250>;
+ };
+
+ ldo1m {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ ldo20m {
+ regulator-name = "vdd_dmics";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ samsung,ext-control = <S2MPG10_EXTCTRL_LDO20M_EN2>;
+ };
+ };
+ };
Documentation/devicetree/bindings/mfd/samsung,s2mpg11-pmic.yaml
View filediff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpg11-pmic.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpg11-pmic.yaml
new file mode 100644
index 0000000..62cedbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpg11-pmic.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mpg11-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPG11 Power Management IC
+
+maintainers:
+ - André Draszik <[email protected]>
+
+description: |
+ This is part of the device tree bindings for the S2MPG11 Power Management IC
+ (PMIC).
+
+ The Samsung S2MPG11 is a Power Management IC for mobile applications with buck
+ converters, various LDOs, power meters, NTC thermistor inputs, and additional
+ GPIO interfaces and typically complements an S2MPG10 PMIC in a main/sub
+ configuration as the sub-PMIC.
+
+properties:
+ compatible:
+ const: samsung,s2mpg11-pmic
+
+ interrupts:
+ maxItems: 1
+
+ regulators:
+ type: object
+ $ref: /schemas/regulator/samsung,s2mpg11-regulator.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+ wakeup-source: true
+
+patternProperties:
+ "^vinb(([1-9]|10)s|[abd])-supply$":
+ description:
+ Phandle to the power supply for each buck rail of this PMIC. There is a
+ 1:1 mapping of numbered supply to rail, e.g. vinb1s-supply supplies
+ buck1s. The remaining mapping is as follows
+ vinba - bucka
+ vinbb - buck boost
+ vinbd - buckd
+
+ "^vinl[1-6]s-supply$":
+ description: |
+ Phandle to the power supply for one or multiple LDO rails of this PMIC.
+ The mapping of supply to rail(s) is as follows
+ vinl1s - ldo1s, ldo2s
+ vinl2s - ldo8s, ldo9s
+ vinl3s - ldo3s, ldo5s, ldo7s, ldo15s
+ vinl4s - ldo10s, ldo11s, ldo12s, ldo14s
+ vinl5s - ldo4s, ldo6s
+ vinl6s - ldo13s
+
+required:
+ - compatible
+ - interrupts
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/samsung,s2mpg10-regulator.h>
+
+ pmic {
+ compatible = "samsung,s2mpg11-pmic";
+ interrupts-extended = <&gpa0 7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ wakeup-source;
+
+ vinl1s-supply = <&buck8m>;
+ vinl2s-supply = <&buck6s>;
+
+ regulators {
+ buckd {
+ regulator-name = "vcc_ufs";
+ regulator-ramp-delay = <6250>;
+ enable-gpios = <&gpp0 1 GPIO_ACTIVE_HIGH>;
+ samsung,ext-control = <S2MPG11_EXTCTRL_UFS_EN>;
+ };
+ };
+ };
Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
View filediff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
index 31d544a..ac5d0c1 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -20,7 +20,6 @@ description: |
properties:
compatible:
enum:
- - samsung,s2mpg10-pmic
- samsung,s2mps11-pmic
- samsung,s2mps13-pmic
- samsung,s2mps14-pmic
@@ -59,12 +58,11 @@ properties:
reset (setting buck voltages to default values).
type: boolean
- system-power-controller: true
-
wakeup-source: true
required:
- compatible
+ - reg
- regulators
additionalProperties: false
@@ -74,31 +72,6 @@ allOf:
properties:
compatible:
contains:
- const: samsung,s2mpg10-pmic
- then:
- properties:
- reg: false
- samsung,s2mps11-acokb-ground: false
- samsung,s2mps11-wrstbi-ground: false
-
- # oneOf is required, because dtschema's fixups.py doesn't handle this
- # nesting here. Its special treatment to allow either interrupt property
- # when only one is specified in the binding works at the top level only.
- oneOf:
- - required: [interrupts]
- - required: [interrupts-extended]
-
- else:
- properties:
- system-power-controller: false
-
- required:
- - reg
-
- - if:
- properties:
- compatible:
- contains:
const: samsung,s2mps11-pmic
then:
properties:
Documentation/devicetree/bindings/regulator/adi,max77675.yaml
View filediff --git a/Documentation/devicetree/bindings/regulator/adi,max77675.yaml b/Documentation/devicetree/bindings/regulator/adi,max77675.yaml
new file mode 100644
index 0000000..c138e61
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/adi,max77675.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/adi,max77675.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77675 PMIC Regulator
+
+maintainers:
+ - Joan Na <[email protected]>
+
+description:
+ The MAX77675 is a Power Management IC providing four switching buck
+ regulators (SBB0–SBB3) accessible via I2C. It supports configuration
+ of output voltages and enable controls for each regulator.
+
+allOf:
+ - $ref: /schemas/input/input.yaml
+ - $ref: /schemas/pinctrl/pincfg-node.yaml
+
+properties:
+ compatible:
+ const: adi,max77675
+
+ reg:
+ maxItems: 1
+
+ reset-time-sec:
+ description: Manual reset time in seconds
+ enum: [4, 8, 12, 16]
+ default: 4
+
+ bias-disable:
+ type: boolean
+ description: Disable internal pull-up for EN pin
+
+ input-debounce:
+ description: Debounce time for the enable pin, in microseconds
+ items:
+ - enum: [100, 30000]
+ default: 100
+
+ adi,en-mode:
+ description: |
+ Enable mode configuration.
+ The debounce time set by 'input-debounce' applies to
+ both push-button and slide-switch modes.
+ "push-button" - A long press triggers power-on or power-down
+ "slide-switch" - Low : powers on, High : powers down
+ "logic" - Low : powers on, High : powers down (no debounce time)
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [push-button, slide-switch, logic]
+ default: slide-switch
+
+ adi,voltage-change-latency-us:
+ description:
+ Specifies the delay (in microseconds) between an output voltage change
+ request and the start of the SBB voltage ramp.
+ enum: [10, 100]
+ default: 100
+
+ adi,drv-sbb-strength:
+ description: |
+ SIMO Buck-Boost Drive Strength Trim.
+ Controls the drive strength of the SIMO regulator's power MOSFETs.
+ This setting affects switching speed, impacting power efficiency and EMI.
+ "max" – Maximum drive strength (~0.6 ns transition time)
+ "high" – High drive strength (~1.2 ns transition time)
+ "low" – Low drive strength (~1.8 ns transition time)
+ "min" – Minimum drive strength (~8 ns transition time)
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [max, high, low, min]
+ default: max
+
+ adi,dvs-slew-rate-mv-per-us:
+ description:
+ Dynamic rising slew rate for output voltage transitions, in mV/μs.
+ This setting is only used when 'adi,fixed-slew-rate' is not present.
+ enum: [5, 10]
+ default: 5
+
+ adi,bias-low-power-request:
+ type: boolean
+ description: Request low-power bias mode
+
+ adi,simo-ldo-always-on:
+ type: boolean
+ description: Set internal LDO to always supply 1.8V
+
+ regulators:
+ type: object
+ description: Regulator child nodes
+ patternProperties:
+ "^sbb[0-3]$":
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ adi,fps-slot:
+ description: |
+ FPS (Flexible Power Sequencer) slot selection.
+ The Flexible Power Sequencer allows resources to power up under
+ hardware or software control. Additionally, each resource can
+ power up independently or among a group of other regulators with
+ adjustable power-up and power-down slots.
+ "slot0" - Assign to FPS Slot 0
+ "slot1" - Assign to FPS Slot 1
+ "slot2" - Assign to FPS Slot 2
+ "slot3" - Assign to FPS Slot 3
+ "default" - Use the default FPS slot value stored in register
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [slot0, slot1, slot2, slot3, default]
+ default: default
+
+ adi,fixed-slew-rate:
+ type: boolean
+ description:
+ When this property is present, the device uses a constant 2 mV/μs
+ slew rate and ignores any dynamic slew rate configuration.
+ When absent, the device uses the dynamic slew rate specified
+ by 'adi,dvs-slew-rate-mv-per-us'
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ max77675: pmic@44 {
+ compatible = "adi,max77675";
+ reg = <0x44>;
+
+ reset-time-sec = <4>;
+ input-debounce = <100>;
+
+ adi,en-mode = "slide-switch";
+ adi,voltage-change-latency-us = <100>;
+ adi,drv-sbb-strength = "max";
+ adi,dvs-slew-rate-mv-per-us = <5>;
+
+ regulators {
+ sbb0: sbb0 {
+ regulator-name = "sbb0";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <5500000>;
+ adi,fps-slot = "default";
+ adi,fixed-slew-rate;
+ };
+
+ sbb1: sbb1 {
+ regulator-name = "sbb1";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <5500000>;
+ adi,fps-slot = "default";
+ adi,fixed-slew-rate;
+ };
+
+ sbb2: sbb2 {
+ regulator-name = "sbb2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <5500000>;
+ adi,fps-slot = "default";
+ adi,fixed-slew-rate;
+ };
+
+ sbb3: sbb3 {
+ regulator-name = "sbb3";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <5500000>;
+ adi,fps-slot = "default";
+ adi,fixed-slew-rate;
+ };
+ };
+ };
+ };
+
Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
View filediff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
index c654acf..eb16e53 100644
--- a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
@@ -40,13 +40,13 @@ patternProperties:
unevaluatedProperties: false
- "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sim1|sim2|sram|usb10)$":
+ "^ldo-v(dig18|emc33|ibr|io28|mc|mch|mipi|rtc|sim1|sim2|sram|usb10)$":
type: object
$ref: regulator.yaml#
properties:
regulator-name:
- pattern: "^v(dig18|emc33|ibr|mc|mch|mipi|rtc|sim1|sim2|sram|usb)$"
+ pattern: "^v(dig18|emc33|ibr|io28|mc|mch|mipi|rtc|sim1|sim2|sram|usb)$"
unevaluatedProperties: false
Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
View filediff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
index 4167840..6c23f18 100644
--- a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
@@ -24,6 +24,11 @@ properties:
reg:
maxItems: 1
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
additionalProperties: false
required:
Documentation/devicetree/bindings/regulator/regulator.yaml
View filediff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 77573bc..042e563 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -274,6 +274,7 @@ patternProperties:
suspend. This property is now deprecated, instead setting voltage
for suspend mode via the API which regulator driver provides is
recommended.
+ deprecated: true
regulator-changeable-in-suspend:
description: whether the default voltage and the regulator on/off
Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
View filediff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
index e95e046..983f4c1 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
@@ -15,6 +15,10 @@ description: |
supply of 2.5V to 5.5V. It can provide up to 3.5A continuous current
capability at over 80% high efficiency.
+ The RT8092 is similar type buck converter. Compared to RT5739, it can offer
+ up to 4A output current and more output voltage range to meet the application
+ on most mobile products.
+
allOf:
- $ref: regulator.yaml#
@@ -23,6 +27,7 @@ properties:
enum:
- richtek,rt5733
- richtek,rt5739
+ - richtek,rt8092
reg:
maxItems: 1
Documentation/devicetree/bindings/regulator/samsung,s2mpg10-regulator.yaml
View filediff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpg10-regulator.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpg10-regulator.yaml
new file mode 100644
index 0000000..7252f94
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpg10-regulator.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mpg10-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPG10 Power Management IC regulators
+
+maintainers:
+ - André Draszik <[email protected]>
+
+description: |
+ This is part of the device tree bindings for the S2MG10 Power Management IC
+ (PMIC).
+
+ The S2MPG10 PMIC provides 10 buck and 31 LDO regulators.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+properties:
+ # 1 LDO with possible (but limited) external control
+ ldo20m:
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ description:
+ Properties for a single LDO regulator.
+
+ allOf:
+ - $ref: "#/$defs/s2mpg10-ext-control"
+
+ properties:
This diff is incomplete. Download the complete patch.
Documentation/devicetree/bindings/regulator/samsung,s2mpg11-regulator.yaml
View fileThis diff is incomplete. Download the complete patch.
Documentation/devicetree/bindings/regulator/ti,tps65185.yaml
View fileThis diff is incomplete. Download the complete patch.
MAINTAINERS
View fileThis diff is incomplete. Download the complete patch.
drivers/mfd/sec-acpm.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mfd/sec-common.c
View fileThis diff is incomplete. Download the complete patch.
drivers/mfd/sec-core.h
View fileThis diff is incomplete. Download the complete patch.
drivers/mfd/sec-irq.c
View fileThis diff is incomplete. Download the complete patch.
drivers/regulator/Kconfig
View fileThis diff is incomplete. Download the complete patch.
drivers/regulator/Makefile
View fileThis diff is incomplete. Download the complete patch.
drivers/regulator/core.c
View fileThis diff is incomplete. Download the complete patch.
drivers/regulator/dummy.c
View fileThis diff is incomplete. Download the complete patch.
drivers/regulator/max77675-regulator.c
View fileThis diff is incomplete. Download the complete patch.
drivers/regulator/rt8092.c
View fileThis diff is incomplete. Download the complete patch.
drivers/regulator/s2mps11.c
View fileThis diff is incomplete. Download the complete patch.
drivers/regulator/tps65185.c
View fileThis diff is incomplete. Download the complete patch.
drivers/rtc/rtc-s5m.c
View fileThis diff is incomplete. Download the complete patch.
include/dt-bindings/regulator/samsung,s2mpg10-regulator.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/mfd/samsung/core.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/mfd/samsung/irq.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/mfd/samsung/s2mpg10.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/mfd/samsung/s2mpg11.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/regulator/driver.h
View fileThis diff is incomplete. Download the complete patch.
rust/helpers/regulator.c
View fileThis diff is incomplete. Download the complete patch.
rust/kernel/regulator.rs
View fileThis diff is incomplete. Download the complete patch.