Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Merge commit. Changes below are compared with the first parent: c61c48df.
Changes
45 files changed · +173 −235
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/devicetree/bindings/mtd/gpmc-nand.txt
View filediff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index e7f8d7e..6a983c1 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -56,20 +56,20 @@ Example for an AM33xx board:
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
- gpmc,sync-clk = <0>;
- gpmc,cs-on = <0>;
- gpmc,cs-rd-off = <44>;
- gpmc,cs-wr-off = <44>;
- gpmc,adv-on = <6>;
- gpmc,adv-rd-off = <34>;
- gpmc,adv-wr-off = <44>;
- gpmc,we-off = <40>;
- gpmc,oe-off = <54>;
- gpmc,access = <64>;
- gpmc,rd-cycle = <82>;
- gpmc,wr-cycle = <82>;
- gpmc,wr-access = <40>;
- gpmc,wr-data-mux-bus = <0>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
#address-cells = <1>;
#size-cells = <1>;
Documentation/devicetree/bindings/net/gpmc-eth.txt
View filediff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
index 24cb4e4..ace4a64 100644
--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
@@ -26,16 +26,16 @@ Required properties:
- bank-width: Address width of the device in bytes. GPMC supports 8-bit
and 16-bit devices and so must be either 1 or 2 bytes.
- compatible: Compatible string property for the ethernet child device.
-- gpmc,cs-on: Chip-select assertion time
-- gpmc,cs-rd-off: Chip-select de-assertion time for reads
-- gpmc,cs-wr-off: Chip-select de-assertion time for writes
-- gpmc,oe-on: Output-enable assertion time
-- gpmc,oe-off Output-enable de-assertion time
-- gpmc,we-on: Write-enable assertion time
-- gpmc,we-off: Write-enable de-assertion time
-- gpmc,access: Start cycle to first data capture (read access)
-- gpmc,rd-cycle: Total read cycle time
-- gpmc,wr-cycle: Total write cycle time
+- gpmc,cs-on-ns: Chip-select assertion time
+- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
+- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
+- gpmc,oe-on-ns: Output-enable assertion time
+- gpmc,oe-off-ns: Output-enable de-assertion time
+- gpmc,we-on-ns: Write-enable assertion time
+- gpmc,we-off-ns: Write-enable de-assertion time
+- gpmc,access-ns: Start cycle to first data capture (read access)
+- gpmc,rd-cycle-ns: Total read cycle time
+- gpmc,wr-cycle-ns: Total write cycle time
- reg: Chip-select, base address (relative to chip-select)
and size of the memory mapped for the device.
Note that base address will be typically 0 as this
@@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 {
bank-width = <2>;
gpmc,mux-add-data;
- gpmc,cs-on = <0>;
- gpmc,cs-rd-off = <186>;
- gpmc,cs-wr-off = <186>;
- gpmc,adv-on = <12>;
- gpmc,adv-rd-off = <48>;
- gpmc,adv-wr-off = <48>;
- gpmc,oe-on = <54>;
- gpmc,oe-off = <168>;
- gpmc,we-on = <54>;
- gpmc,we-off = <168>;
- gpmc,rd-cycle = <186>;
- gpmc,wr-cycle = <186>;
- gpmc,access = <114>;
- gpmc,page-burst-access = <6>;
- gpmc,bus-turnaround = <12>;
- gpmc,cycle2cycle-delay = <18>;
- gpmc,wr-data-mux-bus = <90>;
- gpmc,wr-access = <186>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <186>;
+ gpmc,cs-wr-off-ns = <186>;
+ gpmc,adv-on-ns = <12>;
+ gpmc,adv-rd-off-ns = <48>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <114>;
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,bus-turnaround-ns = <12>;
+ gpmc,cycle2cycle-delay-ns = <18>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+ gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
arch/arm/Kconfig
View filediff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 46e2b52..d423d58 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -897,7 +897,6 @@ config ARCH_MULTI_V7
bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
- select ARCH_VEXPRESS
select CPU_V7
config ARCH_MULTI_V6_V7
arch/arm/boot/dts/am33xx.dtsi
View filediff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d110110..1460d9b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -403,5 +403,17 @@
0x44d80000 0x2000>; /* M3 DMEM */
ti,hwmods = "wkup_m3";
};
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ ti,hwmods = "gpmc";
+ reg = <0x50000000 0x2000>;
+ interrupts = <100>;
+ num-cs = <7>;
+ num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
};
};
arch/arm/boot/dts/cros5250-common.dtsi
View filediff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index 0a61bbb..3f0239e 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -175,6 +175,14 @@
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
+
+ trackpad {
+ reg = <0x67>;
+ compatible = "cypress,cyapa";
+ interrupts = <2 0>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ };
};
i2c@12C80000 {
arch/arm/boot/dts/exynos5250-smdk5250.dts
View filediff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 26d856b..3e0c792 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -214,7 +214,7 @@
};
usb@12110000 {
- samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+ samsung,vbus-gpio = <&gpx2 6 0>;
};
dp-controller {
arch/arm/boot/dts/exynos5250-snow.dts
View filediff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index bf4744b..d449feb 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -183,7 +183,7 @@
};
usb@12110000 {
- samsung,vbus-gpio = <&gpx1 1 1 3 3>;
+ samsung,vbus-gpio = <&gpx1 1 0>;
};
fixed-rate-clocks {
arch/arm/boot/dts/omap3-beagle-xm.dts
View filediff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 5a31964..3046d1f 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -122,6 +122,7 @@
&usb_otg_hs {
interface-type = <0>;
+ usb-phy = <&usb2_phy>;
mode = <3>;
power = <50>;
};
arch/arm/boot/dts/omap3-evm.dts
View filediff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 05f51e1..96d1c20 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -68,6 +68,7 @@
&usb_otg_hs {
interface-type = <0>;
+ usb-phy = <&usb2_phy>;
mode = <3>;
power = <50>;
};
arch/arm/boot/dts/omap3-overo.dtsi
View filediff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index d4a7280..a626c50 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -73,6 +73,7 @@
&usb_otg_hs {
interface-type = <0>;
+ usb-phy = <&usb2_phy>;
mode = <3>;
power = <50>;
};
arch/arm/boot/dts/omap3.dtsi
View filediff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 4ad03d9..82a404d 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -519,7 +519,6 @@
interrupts = <0 92 0x4>, <0 93 0x4>;
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
- usb-phy = <&usb2_phy>;
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
arch/arm/boot/dts/omap36xx.dtsi
View filediff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index b89233e..f3447bc 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -20,9 +20,9 @@
cpu@0 {
operating-points = <
/* kHz uV */
- 300000 975000
- 600000 1075000
- 800000 1200000
+ 300000 1012500
+ 600000 1200000
+ 800000 1325000
>;
clock-latency = <300000>; /* From legacy driver */
};
arch/arm/boot/dts/omap4-sdp.dts
View filediff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index c387bdc..a35d9cd 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -223,6 +223,15 @@
>;
};
+ mcspi1_pins: pinmux_mcspi1_pins {
+ pinctrl-single,pins = <
+ 0xf2 0x100 /* mcspi1_clk.mcspi1_clk INPUT | MODE0 */
+ 0xf4 0x100 /* mcspi1_somi.mcspi1_somi INPUT | MODE0 */
+ 0xf6 0x100 /* mcspi1_simo.mcspi1_simo INPUT | MODE0 */
+ 0xf8 0x100 /* mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/
+ >;
+ };
+
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
@@ -358,12 +367,15 @@
};
&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
eth@0 {
compatible = "ks8851";
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio2>;
- interrupts = <2>; /* gpio line 34 */
+ interrupts = <2 8>; /* gpio line 34, low triggered */
vdd-supply = <&vdd_eth>;
};
};
arch/arm/boot/dts/omap4-var-som.dts
View filediff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts
index 222a413..7e04103 100644
--- a/arch/arm/boot/dts/omap4-var-som.dts
+++ b/arch/arm/boot/dts/omap4-var-som.dts
@@ -68,7 +68,7 @@
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio6>;
- interrupts = <11>; /* gpio line 171 */
+ interrupts = <11 8>; /* gpio line 171, low triggered */
vdd-supply = <&vdd_eth>;
};
};
arch/arm/boot/dts/omap4460.dtsi
View filediff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 7c2c23c..2cf227c 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -15,9 +15,9 @@
cpu@0 {
operating-points = <
/* kHz uV */
- 350000 975000
- 700000 1075000
- 920000 1200000
+ 350000 1025000
+ 700000 1200000
+ 920000 1313000
>;
clock-latency = <300000>; /* From legacy driver */
};
arch/arm/configs/omap2plus_defconfig
View filediff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 33903ca..c1ef64b 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -137,6 +137,8 @@ CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
@@ -153,6 +155,7 @@ CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
+CONFIG_TWL6040_CORE=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
@@ -195,6 +198,7 @@ CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
+CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_USB=y
CONFIG_USB_DEBUG=y
arch/arm/kernel/devtree.c
View filediff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 70f1bde..5af04f6 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -180,6 +180,13 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
unsigned long dt_root;
const char *model;
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+ DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
+ MACHINE_END
+
+ mdesc_best = (struct machine_desc *)&__mach_desc_GENERIC_DT;
+#endif
+
if (!dt_phys)
return NULL;
arch/arm/kernel/setup.c
View filediff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 728007c..1522c7a 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -18,6 +18,7 @@
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/screen_info.h>
+#include <linux/of_platform.h>
#include <linux/init.h>
#include <linux/kexec.h>
#include <linux/of_fdt.h>
@@ -659,9 +660,19 @@ struct screen_info screen_info = {
static int __init customize_machine(void)
{
- /* customizes platform devices, or adds new ones */
+ /*
+ * customizes platform devices, or adds new ones
+ * On DT based machines, we fall back to populating the
+ * machine from the device tree, if no callback is provided,
+ * otherwise we would always need an init_machine callback.
+ */
if (machine_desc->init_machine)
machine_desc->init_machine();
+#ifdef CONFIG_OF
+ else
+ of_platform_populate(NULL, of_default_bus_match_table,
+ NULL, NULL);
+#endif
return 0;
}
arch_initcall(customize_machine);
arch/arm/mach-exynos/include/mach/regs-pmu.h
View filediff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 3f30aa1..57344b7 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -344,6 +344,7 @@
#define EXYNOS5_FSYS_ARM_OPTION S5P_PMUREG(0x2208)
#define EXYNOS5_ISP_ARM_OPTION S5P_PMUREG(0x2288)
#define EXYNOS5_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
+#define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608)
#define EXYNOS5_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
#define EXYNOS5_TOP_PWR_SYSMEM_OPTION S5P_PMUREG(0x2CC8)
#define EXYNOS5_JPEG_MEM_OPTION S5P_PMUREG(0x2F48)
arch/arm/mach-exynos/pmu.c
View filediff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index daebc1a..97d6885 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -228,6 +228,7 @@ static struct exynos_pmu_conf exynos5250_pmu_config[] = {
{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS5_ARM_L2_OPTION, { 0x10, 0x10, 0x0 } },
{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
@@ -353,11 +354,9 @@ static void exynos5_init_pmu(void)
/*
* SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
- * MANUAL_L2RSTDISABLE_CONTROL_BITFIELD Enable
*/
tmp = __raw_readl(EXYNOS5_ARM_COMMON_OPTION);
- tmp |= (EXYNOS5_MANUAL_L2RSTDISABLE_CONTROL |
- EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN);
+ tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
__raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
/*
arch/arm/mach-imx/Kconfig
View filediff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 78f795d..ba44328 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -5,6 +5,7 @@ config ARCH_MXC
select AUTO_ZRELADDR if !ZBOOT_ROM
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MULTI_IRQ_HANDLER
@@ -61,10 +62,6 @@ config MXC_ULPI
config ARCH_HAS_RNGA
bool
-config IRAM_ALLOC
- bool
- select GENERIC_ALLOCATOR
-
config HAVE_IMX_ANATOP
bool
arch/arm/mach-imx/Makefile
View filediff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 9309589..70ae7c4 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
-obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
arch/arm/mach-imx/common.h
View filediff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 4cba7db..c08ae3f 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -12,6 +12,7 @@
#define __ASM_ARCH_MXC_COMMON_H__
struct platform_device;
+struct pt_regs;
struct clk;
enum mxc_cpu_pwr_mode;
arch/arm/mach-imx/headsmp.S
View filediff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index a58c8b0..67b9c48 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -24,7 +24,7 @@ ENTRY(v7_secondary_startup)
ENDPROC(v7_secondary_startup)
#endif
-#ifdef CONFIG_PM
+#ifdef CONFIG_ARM_CPU_SUSPEND
/*
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
arch/arm/mach-imx/hotplug.c
View filediff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 5e91112..3daf1ed 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -11,7 +11,9 @@
*/
#include <linux/errno.h>
+#include <linux/jiffies.h>
#include <asm/cp15.h>
+#include <asm/proc-fns.h>
#include "common.h"
arch/arm/mach-imx/iram_alloc.c
View before deletiondiff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c
deleted file mode 100644
index e05cf40..0000000
--- a/arch/arm/mach-imx/iram_alloc.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/genalloc.h>
-#include "linux/platform_data/imx-iram.h"
-
-static unsigned long iram_phys_base;
-static void __iomem *iram_virt_base;
-static struct gen_pool *iram_pool;
-
-static inline void __iomem *iram_phys_to_virt(unsigned long p)
-{
- return iram_virt_base + (p - iram_phys_base);
-}
-
-void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
-{
- if (!iram_pool)
- return NULL;
-
- *dma_addr = gen_pool_alloc(iram_pool, size);
- pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr);
- if (!*dma_addr)
- return NULL;
- return iram_phys_to_virt(*dma_addr);
-}
-EXPORT_SYMBOL(iram_alloc);
-
-void iram_free(unsigned long addr, unsigned int size)
-{
- if (!iram_pool)
- return;
-
- gen_pool_free(iram_pool, addr, size);
-}
-EXPORT_SYMBOL(iram_free);
-
-int __init iram_init(unsigned long base, unsigned long size)
-{
- iram_phys_base = base;
-
- iram_pool = gen_pool_create(PAGE_SHIFT, -1);
- if (!iram_pool)
- return -ENOMEM;
-
- gen_pool_add(iram_pool, base, size, -1);
- iram_virt_base = ioremap(iram_phys_base, size);
- if (!iram_virt_base)
- return -EIO;
-
- pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base);
- return 0;
-}
arch/arm/mach-omap1/dma.c
View filediff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 1a4e887..68ab858 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -301,7 +301,7 @@ static int __init omap1_system_dma_init(void)
if (ret) {
This diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/Kconfig
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/Makefile
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/board-omap3beagle.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/board-rx51-peripherals.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/gpmc.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/id.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/mux34xx.h
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/omap_device.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-omap2/soc.h
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-prima2/Kconfig
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-spear/spear13xx.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-tegra/Kconfig
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-ux500/Kconfig
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-ux500/board-mop500.c
View fileThis diff is incomplete. Download the complete patch.
arch/arm/mach-ux500/cpu-db8500.c
View fileThis diff is incomplete. Download the complete patch.
drivers/video/Kconfig
View fileThis diff is incomplete. Download the complete patch.
drivers/video/mxsfb.c
View fileThis diff is incomplete. Download the complete patch.
include/linux/platform_data/imx-iram.h
View before deletionThis diff is incomplete. Download the complete patch.