projects/linux·blob master · refs

469 lines · 14.4 KiB

1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 NetWinder Floating Point Emulator
4 (c) Rebel.COM, 1998,1999
5 (c) Philip Blundell, 2001
6
7 Direct questions, comments to Scott Bambrough <[email protected]>
8
9*/
10
11#ifndef __FPOPCODE_H__
12#define __FPOPCODE_H__
13
14
15/*
16ARM Floating Point Instruction Classes
17| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
18|c o n d|1 1 0 P|U|u|W|L| Rn |v| Fd |0|0|0|1| o f f s e t | CPDT
19|c o n d|1 1 0 P|U|w|W|L| Rn |x| Fd |0|0|1|0| o f f s e t | CPDT (copro 2)
20| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
21|c o n d|1 1 1 0|a|b|c|d|e| Fn |j| Fd |0|0|0|1|f|g|h|0|i| Fm | CPDO
22|c o n d|1 1 1 0|a|b|c|L|e| Fn | Rd |0|0|0|1|f|g|h|1|i| Fm | CPRT
23|c o n d|1 1 1 0|a|b|c|1|e| Fn |1|1|1|1|0|0|0|1|f|g|h|1|i| Fm | comparisons
24| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
25
26CPDT data transfer instructions
27 LDF, STF, LFM (copro 2), SFM (copro 2)
28
29CPDO dyadic arithmetic instructions
30 ADF, MUF, SUF, RSF, DVF, RDF,
31 POW, RPW, RMF, FML, FDV, FRD, POL
32
33CPDO monadic arithmetic instructions
34 MVF, MNF, ABS, RND, SQT, LOG, LGN, EXP,
35 SIN, COS, TAN, ASN, ACS, ATN, URD, NRM
36
37CPRT joint arithmetic/data transfer instructions
38 FIX (arithmetic followed by load/store)
39 FLT (load/store followed by arithmetic)
40 CMF, CNF CMFE, CNFE (comparisons)
41 WFS, RFS (write/read floating point status register)
42 WFC, RFC (write/read floating point control register)
43
44cond condition codes
45P pre/post index bit: 0 = postindex, 1 = preindex
46U up/down bit: 0 = stack grows down, 1 = stack grows up
47W write back bit: 1 = update base register (Rn)
48L load/store bit: 0 = store, 1 = load
49Rn base register
50Rd destination/source register
51Fd floating point destination register
52Fn floating point source register
53Fm floating point source register or floating point constant
54
55uv transfer length (TABLE 1)
56wx register count (TABLE 2)
57abcd arithmetic opcode (TABLES 3 & 4)
58ef destination size (rounding precision) (TABLE 5)
59gh rounding mode (TABLE 6)
60j dyadic/monadic bit: 0 = dyadic, 1 = monadic
61i constant bit: 1 = constant (TABLE 6)
62*/
63
64/*
65TABLE 1
66+-------------------------+---+---+---------+---------+
67| Precision | u | v | FPSR.EP | length |
68+-------------------------+---+---+---------+---------+
69| Single | 0 | 0 | x | 1 words |
70| Double | 1 | 1 | x | 2 words |
71| Extended | 1 | 1 | x | 3 words |
72| Packed decimal | 1 | 1 | 0 | 3 words |
73| Expanded packed decimal | 1 | 1 | 1 | 4 words |
74+-------------------------+---+---+---------+---------+
75Note: x = don't care
76*/
77
78/*
79TABLE 2
80+---+---+---------------------------------+
81| w | x | Number of registers to transfer |
82+---+---+---------------------------------+
83| 0 | 1 | 1 |
84| 1 | 0 | 2 |
85| 1 | 1 | 3 |
86| 0 | 0 | 4 |
87+---+---+---------------------------------+
88*/
89
90/*
91TABLE 3: Dyadic Floating Point Opcodes
92+---+---+---+---+----------+-----------------------+-----------------------+
93| a | b | c | d | Mnemonic | Description | Operation |
94+---+---+---+---+----------+-----------------------+-----------------------+
95| 0 | 0 | 0 | 0 | ADF | Add | Fd := Fn + Fm |
96| 0 | 0 | 0 | 1 | MUF | Multiply | Fd := Fn * Fm |
97| 0 | 0 | 1 | 0 | SUF | Subtract | Fd := Fn - Fm |
98| 0 | 0 | 1 | 1 | RSF | Reverse subtract | Fd := Fm - Fn |
99| 0 | 1 | 0 | 0 | DVF | Divide | Fd := Fn / Fm |
100| 0 | 1 | 0 | 1 | RDF | Reverse divide | Fd := Fm / Fn |
101| 0 | 1 | 1 | 0 | POW | Power | Fd := Fn ^ Fm |
102| 0 | 1 | 1 | 1 | RPW | Reverse power | Fd := Fm ^ Fn |
103| 1 | 0 | 0 | 0 | RMF | Remainder | Fd := IEEE rem(Fn/Fm) |
104| 1 | 0 | 0 | 1 | FML | Fast Multiply | Fd := Fn * Fm |
105| 1 | 0 | 1 | 0 | FDV | Fast Divide | Fd := Fn / Fm |
106| 1 | 0 | 1 | 1 | FRD | Fast reverse divide | Fd := Fm / Fn |
107| 1 | 1 | 0 | 0 | POL | Polar angle (ArcTan2) | Fd := arctan2(Fn,Fm) |
108| 1 | 1 | 0 | 1 | | undefined instruction | trap |
109| 1 | 1 | 1 | 0 | | undefined instruction | trap |
110| 1 | 1 | 1 | 1 | | undefined instruction | trap |
111+---+---+---+---+----------+-----------------------+-----------------------+
112Note: POW, RPW, POL are deprecated, and are available for backwards
113 compatibility only.
114*/
115
116/*
117TABLE 4: Monadic Floating Point Opcodes
118+---+---+---+---+----------+-----------------------+-----------------------+
119| a | b | c | d | Mnemonic | Description | Operation |
120+---+---+---+---+----------+-----------------------+-----------------------+
121| 0 | 0 | 0 | 0 | MVF | Move | Fd := Fm |
122| 0 | 0 | 0 | 1 | MNF | Move negated | Fd := - Fm |
123| 0 | 0 | 1 | 0 | ABS | Absolute value | Fd := abs(Fm) |
124| 0 | 0 | 1 | 1 | RND | Round to integer | Fd := int(Fm) |
125| 0 | 1 | 0 | 0 | SQT | Square root | Fd := sqrt(Fm) |
126| 0 | 1 | 0 | 1 | LOG | Log base 10 | Fd := log10(Fm) |
127| 0 | 1 | 1 | 0 | LGN | Log base e | Fd := ln(Fm) |
128| 0 | 1 | 1 | 1 | EXP | Exponent | Fd := e ^ Fm |
129| 1 | 0 | 0 | 0 | SIN | Sine | Fd := sin(Fm) |
130| 1 | 0 | 0 | 1 | COS | Cosine | Fd := cos(Fm) |
131| 1 | 0 | 1 | 0 | TAN | Tangent | Fd := tan(Fm) |
132| 1 | 0 | 1 | 1 | ASN | Arc Sine | Fd := arcsin(Fm) |
133| 1 | 1 | 0 | 0 | ACS | Arc Cosine | Fd := arccos(Fm) |
134| 1 | 1 | 0 | 1 | ATN | Arc Tangent | Fd := arctan(Fm) |
135| 1 | 1 | 1 | 0 | URD | Unnormalized round | Fd := int(Fm) |
136| 1 | 1 | 1 | 1 | NRM | Normalize | Fd := norm(Fm) |
137+---+---+---+---+----------+-----------------------+-----------------------+
138Note: LOG, LGN, EXP, SIN, COS, TAN, ASN, ACS, ATN are deprecated, and are
139 available for backwards compatibility only.
140*/
141
142/*
143TABLE 5
144+-------------------------+---+---+
145| Rounding Precision | e | f |
146+-------------------------+---+---+
147| IEEE Single precision | 0 | 0 |
148| IEEE Double precision | 0 | 1 |
149| IEEE Extended precision | 1 | 0 |
150| undefined (trap) | 1 | 1 |
151+-------------------------+---+---+
152*/
153
154/*
155TABLE 5
156+---------------------------------+---+---+
157| Rounding Mode | g | h |
158+---------------------------------+---+---+
159| Round to nearest (default) | 0 | 0 |
160| Round toward plus infinity | 0 | 1 |
161| Round toward negative infinity | 1 | 0 |
162| Round toward zero | 1 | 1 |
163+---------------------------------+---+---+
164*/
165
166/*
167===
168=== Definitions for load and store instructions
169===
170*/
171
172/* bit masks */
173#define BIT_PREINDEX 0x01000000
174#define BIT_UP 0x00800000
175#define BIT_WRITE_BACK 0x00200000
176#define BIT_LOAD 0x00100000
177
178/* masks for load/store */
179#define MASK_CPDT 0x0c000000 /* data processing opcode */
180#define MASK_OFFSET 0x000000ff
181#define MASK_TRANSFER_LENGTH 0x00408000
182#define MASK_REGISTER_COUNT MASK_TRANSFER_LENGTH
183#define MASK_COPROCESSOR 0x00000f00
184
185/* Tests for transfer length */
186#define TRANSFER_SINGLE 0x00000000
187#define TRANSFER_DOUBLE 0x00008000
188#define TRANSFER_EXTENDED 0x00400000
189#define TRANSFER_PACKED MASK_TRANSFER_LENGTH
190
191/* Get the coprocessor number from the opcode. */
192#define getCoprocessorNumber(opcode) ((opcode & MASK_COPROCESSOR) >> 8)
193
194/* Get the offset from the opcode. */
195#define getOffset(opcode) (opcode & MASK_OFFSET)
196
197/* Tests for specific data transfer load/store opcodes. */
198#define TEST_OPCODE(opcode,mask) (((opcode) & (mask)) == (mask))
199
200#define LOAD_OP(opcode) TEST_OPCODE((opcode),MASK_CPDT | BIT_LOAD)
201#define STORE_OP(opcode) ((opcode & (MASK_CPDT | BIT_LOAD)) == MASK_CPDT)
202
203#define LDF_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
204#define LFM_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
205#define STF_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
206#define SFM_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
207
208#define PREINDEXED(opcode) ((opcode & BIT_PREINDEX) != 0)
209#define POSTINDEXED(opcode) ((opcode & BIT_PREINDEX) == 0)
210#define BIT_UP_SET(opcode) ((opcode & BIT_UP) != 0)
211#define BIT_UP_CLEAR(opcode) ((opcode & BIT_DOWN) == 0)
212#define WRITE_BACK(opcode) ((opcode & BIT_WRITE_BACK) != 0)
213#define LOAD(opcode) ((opcode & BIT_LOAD) != 0)
214#define STORE(opcode) ((opcode & BIT_LOAD) == 0)
215
216/*
217===
218=== Definitions for arithmetic instructions
219===
220*/
221/* bit masks */
222#define BIT_MONADIC 0x00008000
223#define BIT_CONSTANT 0x00000008
224
225#define CONSTANT_FM(opcode) ((opcode & BIT_CONSTANT) != 0)
226#define MONADIC_INSTRUCTION(opcode) ((opcode & BIT_MONADIC) != 0)
227
228/* instruction identification masks */
229#define MASK_CPDO 0x0e000000 /* arithmetic opcode */
230#define MASK_ARITHMETIC_OPCODE 0x00f08000
231#define MASK_DESTINATION_SIZE 0x00080080
232
233/* dyadic arithmetic opcodes. */
234#define ADF_CODE 0x00000000
235#define MUF_CODE 0x00100000
236#define SUF_CODE 0x00200000
237#define RSF_CODE 0x00300000
238#define DVF_CODE 0x00400000
239#define RDF_CODE 0x00500000
240#define POW_CODE 0x00600000
241#define RPW_CODE 0x00700000
242#define RMF_CODE 0x00800000
243#define FML_CODE 0x00900000
244#define FDV_CODE 0x00a00000
245#define FRD_CODE 0x00b00000
246#define POL_CODE 0x00c00000
247/* 0x00d00000 is an invalid dyadic arithmetic opcode */
248/* 0x00e00000 is an invalid dyadic arithmetic opcode */
249/* 0x00f00000 is an invalid dyadic arithmetic opcode */
250
251/* monadic arithmetic opcodes. */
252#define MVF_CODE 0x00008000
253#define MNF_CODE 0x00108000
254#define ABS_CODE 0x00208000
255#define RND_CODE 0x00308000
256#define SQT_CODE 0x00408000
257#define LOG_CODE 0x00508000
258#define LGN_CODE 0x00608000
259#define EXP_CODE 0x00708000
260#define SIN_CODE 0x00808000
261#define COS_CODE 0x00908000
262#define TAN_CODE 0x00a08000
263#define ASN_CODE 0x00b08000
264#define ACS_CODE 0x00c08000
265#define ATN_CODE 0x00d08000
266#define URD_CODE 0x00e08000
267#define NRM_CODE 0x00f08000
268
269/*
270===
271=== Definitions for register transfer and comparison instructions
272===
273*/
274
275#define MASK_CPRT 0x0e000010 /* register transfer opcode */
276#define MASK_CPRT_CODE 0x00f00000
277#define FLT_CODE 0x00000000
278#define FIX_CODE 0x00100000
279#define WFS_CODE 0x00200000
280#define RFS_CODE 0x00300000
281#define WFC_CODE 0x00400000
282#define RFC_CODE 0x00500000
283#define CMF_CODE 0x00900000
284#define CNF_CODE 0x00b00000
285#define CMFE_CODE 0x00d00000
286#define CNFE_CODE 0x00f00000
287
288/*
289===
290=== Common definitions
291===
292*/
293
294/* register masks */
295#define MASK_Rd 0x0000f000
296#define MASK_Rn 0x000f0000
297#define MASK_Fd 0x00007000
298#define MASK_Fm 0x00000007
299#define MASK_Fn 0x00070000
300
301/* condition code masks */
302#define CC_MASK 0xf0000000
303#define CC_NEGATIVE 0x80000000
304#define CC_ZERO 0x40000000
305#define CC_CARRY 0x20000000
306#define CC_OVERFLOW 0x10000000
307#define CC_EQ 0x00000000
308#define CC_NE 0x10000000
309#define CC_CS 0x20000000
310#define CC_HS CC_CS
311#define CC_CC 0x30000000
312#define CC_LO CC_CC
313#define CC_MI 0x40000000
314#define CC_PL 0x50000000
315#define CC_VS 0x60000000
316#define CC_VC 0x70000000
317#define CC_HI 0x80000000
318#define CC_LS 0x90000000
319#define CC_GE 0xa0000000
320#define CC_LT 0xb0000000
321#define CC_GT 0xc0000000
322#define CC_LE 0xd0000000
323#define CC_AL 0xe0000000
324#define CC_NV 0xf0000000
325
326/* rounding masks/values */
327#define MASK_ROUNDING_MODE 0x00000060
328#define ROUND_TO_NEAREST 0x00000000
329#define ROUND_TO_PLUS_INFINITY 0x00000020
330#define ROUND_TO_MINUS_INFINITY 0x00000040
331#define ROUND_TO_ZERO 0x00000060
332
333#define MASK_ROUNDING_PRECISION 0x00080080
334#define ROUND_SINGLE 0x00000000
335#define ROUND_DOUBLE 0x00000080
336#define ROUND_EXTENDED 0x00080000
337
338/* Get the condition code from the opcode. */
339#define getCondition(opcode) (opcode >> 28)
340
341/* Get the source register from the opcode. */
342#define getRn(opcode) ((opcode & MASK_Rn) >> 16)
343
344/* Get the destination floating point register from the opcode. */
345#define getFd(opcode) ((opcode & MASK_Fd) >> 12)
346
347/* Get the first source floating point register from the opcode. */
348#define getFn(opcode) ((opcode & MASK_Fn) >> 16)
349
350/* Get the second source floating point register from the opcode. */
351#define getFm(opcode) (opcode & MASK_Fm)
352
353/* Get the destination register from the opcode. */
354#define getRd(opcode) ((opcode & MASK_Rd) >> 12)
355
356/* Get the rounding mode from the opcode. */
357#define getRoundingMode(opcode) ((opcode & MASK_ROUNDING_MODE) >> 5)
358
359#ifdef CONFIG_FPE_NWFPE_XP
360static inline floatx80 __pure getExtendedConstant(const unsigned int nIndex)
361{
362 extern const floatx80 floatx80Constant[];
363 return floatx80Constant[nIndex];
364}
365#endif
366
367static inline float64 __pure getDoubleConstant(const unsigned int nIndex)
368{
369 extern const float64 float64Constant[];
370 return float64Constant[nIndex];
371}
372
373static inline float32 __pure getSingleConstant(const unsigned int nIndex)
374{
375 extern const float32 float32Constant[];
376 return float32Constant[nIndex];
377}
378
379static inline unsigned int getTransferLength(const unsigned int opcode)
380{
381 unsigned int nRc;
382
383 switch (opcode & MASK_TRANSFER_LENGTH) {
384 case 0x00000000:
385 nRc = 1;
386 break; /* single precision */
387 case 0x00008000:
388 nRc = 2;
389 break; /* double precision */
390 case 0x00400000:
391 nRc = 3;
392 break; /* extended precision */
393 default:
394 nRc = 0;
395 }
396
397 return (nRc);
398}
399
400static inline unsigned int getRegisterCount(const unsigned int opcode)
401{
402 unsigned int nRc;
403
404 switch (opcode & MASK_REGISTER_COUNT) {
405 case 0x00000000:
406 nRc = 4;
407 break;
408 case 0x00008000:
409 nRc = 1;
410 break;
411 case 0x00400000:
412 nRc = 2;
413 break;
414 case 0x00408000:
415 nRc = 3;
416 break;
417 default:
418 nRc = 0;
419 }
420
421 return (nRc);
422}
423
424static inline unsigned int getRoundingPrecision(const unsigned int opcode)
425{
426 unsigned int nRc;
427
428 switch (opcode & MASK_ROUNDING_PRECISION) {
429 case 0x00000000:
430 nRc = 1;
431 break;
432 case 0x00000080:
433 nRc = 2;
434 break;
435 case 0x00080000:
436 nRc = 3;
437 break;
438 default:
439 nRc = 0;
440 }
441
442 return (nRc);
443}
444
445static inline unsigned int getDestinationSize(const unsigned int opcode)
446{
447 unsigned int nRc;
448
449 switch (opcode & MASK_DESTINATION_SIZE) {
450 case 0x00000000:
451 nRc = typeSingle;
452 break;
453 case 0x00000080:
454 nRc = typeDouble;
455 break;
456 case 0x00080000:
457 nRc = typeExtended;
458 break;
459 default:
460 nRc = typeNone;
461 }
462
463 return (nRc);
464}
465
466extern const float64 float64Constant[];
467extern const float32 float32Constant[];
468
469#endif