| 1 |
|
| 2 | |
| 3 | * linux/include/asm/dma.h: Defines for using and allocating dma channels.
|
| 4 | * Written by Hennus Bergman, 1992.
|
| 5 | * High DMA channel support & info by Hannu Savolainen
|
| 6 | * and John Boyd, Nov. 1992.
|
| 7 | *
|
| 8 | * NOTE: all this is true *only* for ISA/EISA expansions on Mips boards
|
| 9 | * and can only be used for expansion cards. Onboard DMA controllers, such
|
| 10 | * as the R4030 on Jazz boards behave totally different!
|
| 11 |
|
| 12 |
|
| 13 | #ifndef _ASM_DMA_H
|
| 14 | #define _ASM_DMA_H
|
| 15 |
|
| 16 | #include <asm/io.h>
|
| 17 | #include <linux/spinlock.h>
|
| 18 | #include <linux/delay.h>
|
| 19 |
|
| 20 |
|
| 21 | #ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
|
| 22 | #define dma_outb outb_p
|
| 23 | #else
|
| 24 | #define dma_outb outb
|
| 25 | #endif
|
| 26 |
|
| 27 | #define dma_inb inb
|
| 28 |
|
| 29 | |
| 30 | * NOTES about DMA transfers:
|
| 31 | *
|
| 32 | * controller 1: channels 0-3, byte operations, ports 00-1F
|
| 33 | * controller 2: channels 4-7, word operations, ports C0-DF
|
| 34 | *
|
| 35 | * - ALL registers are 8 bits only, regardless of transfer size
|
| 36 | * - channel 4 is not used - cascades 1 into 2.
|
| 37 | * - channels 0-3 are byte - addresses/counts are for physical bytes
|
| 38 | * - channels 5-7 are word - addresses/counts are for physical words
|
| 39 | * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
|
| 40 | * - transfer count loaded to registers is 1 less than actual count
|
| 41 | * - controller 2 offsets are all even (2x offsets for controller 1)
|
| 42 | * - page registers for 5-7 don't use data bit 0, represent 128K pages
|
| 43 | * - page registers for 0-3 use bit 0, represent 64K pages
|
| 44 | *
|
| 45 | * DMA transfers are limited to the lower 16MB of _physical_ memory.
|
| 46 | * Note that addresses loaded into registers must be _physical_ addresses,
|
| 47 | * not logical addresses (which may differ if paging is active).
|
| 48 | *
|
| 49 | * Address mapping for channels 0-3:
|
| 50 | *
|
| 51 | * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
|
| 52 | * | ... | | ... | | ... |
|
| 53 | * | ... | | ... | | ... |
|
| 54 | * | ... | | ... | | ... |
|
| 55 | * P7 ... P0 A7 ... A0 A7 ... A0
|
| 56 | * | Page | Addr MSB | Addr LSB | (DMA registers)
|
| 57 | *
|
| 58 | * Address mapping for channels 5-7:
|
| 59 | *
|
| 60 | * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
|
| 61 | * | ... | \ \ ... \ \ \ ... \ \
|
| 62 | * | ... | \ \ ... \ \ \ ... \ (not used)
|
| 63 | * | ... | \ \ ... \ \ \ ... \
|
| 64 | * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
|
| 65 | * | Page | Addr MSB | Addr LSB | (DMA registers)
|
| 66 | *
|
| 67 | * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
|
| 68 | * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
|
| 69 | * the hardware level, so odd-byte transfers aren't possible).
|
| 70 | *
|
| 71 | * Transfer count (_not # bytes_) is limited to 64K, represented as actual
|
| 72 | * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
|
| 73 | * and up to 128K bytes may be transferred on channels 5-7 in one operation.
|
| 74 | *
|
| 75 |
|
| 76 |
|
| 77 | #ifndef CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN
|
| 78 | #define MAX_DMA_CHANNELS 8
|
| 79 | #endif
|
| 80 |
|
| 81 | |
| 82 | * The maximum address in KSEG0 that we can perform a DMA transfer to on this
|
| 83 | * platform. This describes only the PC style part of the DMA logic like on
|
| 84 | * Deskstations or Acer PICA but not the much more versatile DMA logic used
|
| 85 | * for the local devices on Acer PICA or Magnums.
|
| 86 |
|
| 87 | #if defined(CONFIG_SGI_IP22) || defined(CONFIG_SGI_IP28)
|
| 88 |
|
| 89 | #define MAX_DMA_ADDRESS PAGE_OFFSET
|
| 90 | #else
|
| 91 | #define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x01000000)
|
| 92 | #endif
|
| 93 | #define MAX_DMA_PFN PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS))
|
| 94 |
|
| 95 | #ifndef MAX_DMA32_PFN
|
| 96 | #define MAX_DMA32_PFN (1UL << (32 - PAGE_SHIFT))
|
| 97 | #endif
|
| 98 |
|
| 99 |
|
| 100 | #define IO_DMA1_BASE 0x00
|
| 101 | #define IO_DMA2_BASE 0xC0
|
| 102 |
|
| 103 |
|
| 104 | #define DMA1_CMD_REG 0x08
|
| 105 | #define DMA1_STAT_REG 0x08
|
| 106 | #define DMA1_REQ_REG 0x09
|
| 107 | #define DMA1_MASK_REG 0x0A
|
| 108 | #define DMA1_MODE_REG 0x0B
|
| 109 | #define DMA1_CLEAR_FF_REG 0x0C
|
| 110 | #define DMA1_TEMP_REG 0x0D
|
| 111 | #define DMA1_RESET_REG 0x0D
|
| 112 | #define DMA1_CLR_MASK_REG 0x0E
|
| 113 | #define DMA1_MASK_ALL_REG 0x0F
|
| 114 |
|
| 115 | #define DMA2_CMD_REG 0xD0
|
| 116 | #define DMA2_STAT_REG 0xD0
|
| 117 | #define DMA2_REQ_REG 0xD2
|
| 118 | #define DMA2_MASK_REG 0xD4
|
| 119 | #define DMA2_MODE_REG 0xD6
|
| 120 | #define DMA2_CLEAR_FF_REG 0xD8
|
| 121 | #define DMA2_TEMP_REG 0xDA
|
| 122 | #define DMA2_RESET_REG 0xDA
|
| 123 | #define DMA2_CLR_MASK_REG 0xDC
|
| 124 | #define DMA2_MASK_ALL_REG 0xDE
|
| 125 |
|
| 126 | #define DMA_ADDR_0 0x00
|
| 127 | #define DMA_ADDR_1 0x02
|
| 128 | #define DMA_ADDR_2 0x04
|
| 129 | #define DMA_ADDR_3 0x06
|
| 130 | #define DMA_ADDR_4 0xC0
|
| 131 | #define DMA_ADDR_5 0xC4
|
| 132 | #define DMA_ADDR_6 0xC8
|
| 133 | #define DMA_ADDR_7 0xCC
|
| 134 |
|
| 135 | #define DMA_CNT_0 0x01
|
| 136 | #define DMA_CNT_1 0x03
|
| 137 | #define DMA_CNT_2 0x05
|
| 138 | #define DMA_CNT_3 0x07
|
| 139 | #define DMA_CNT_4 0xC2
|
| 140 | #define DMA_CNT_5 0xC6
|
| 141 | #define DMA_CNT_6 0xCA
|
| 142 | #define DMA_CNT_7 0xCE
|
| 143 |
|
| 144 | #define DMA_PAGE_0 0x87
|
| 145 | #define DMA_PAGE_1 0x83
|
| 146 | #define DMA_PAGE_2 0x81
|
| 147 | #define DMA_PAGE_3 0x82
|
| 148 | #define DMA_PAGE_5 0x8B
|
| 149 | #define DMA_PAGE_6 0x89
|
| 150 | #define DMA_PAGE_7 0x8A
|
| 151 |
|
| 152 | #define DMA_MODE_READ 0x44
|
| 153 | #define DMA_MODE_WRITE 0x48
|
| 154 | #define DMA_MODE_CASCADE 0xC0
|
| 155 |
|
| 156 | #define DMA_AUTOINIT 0x10
|
| 157 |
|
| 158 | extern spinlock_t dma_spin_lock;
|
| 159 |
|
| 160 | static __inline__ unsigned long claim_dma_lock(void)
|
| 161 | {
|
| 162 | unsigned long flags;
|
| 163 | spin_lock_irqsave(&dma_spin_lock, flags);
|
| 164 | return flags;
|
| 165 | }
|
| 166 |
|
| 167 | static __inline__ void release_dma_lock(unsigned long flags)
|
| 168 | {
|
| 169 | spin_unlock_irqrestore(&dma_spin_lock, flags);
|
| 170 | }
|
| 171 |
|
| 172 |
|
| 173 | static __inline__ void enable_dma(unsigned int dmanr)
|
| 174 | {
|
| 175 | if (dmanr<=3)
|
| 176 | dma_outb(dmanr, DMA1_MASK_REG);
|
| 177 | else
|
| 178 | dma_outb(dmanr & 3, DMA2_MASK_REG);
|
| 179 | }
|
| 180 |
|
| 181 | static __inline__ void disable_dma(unsigned int dmanr)
|
| 182 | {
|
| 183 | if (dmanr<=3)
|
| 184 | dma_outb(dmanr | 4, DMA1_MASK_REG);
|
| 185 | else
|
| 186 | dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
|
| 187 | }
|
| 188 |
|
| 189 | |
| 190 | * Write 0 for LSB/MSB, 1 for MSB/LSB access.
|
| 191 | * Use this once to initialize the FF to a known state.
|
| 192 | * After that, keep track of it. :-)
|
| 193 | * --- In order to do that, the DMA routines below should ---
|
| 194 | * --- only be used while holding the DMA lock ! ---
|
| 195 |
|
| 196 | static __inline__ void clear_dma_ff(unsigned int dmanr)
|
| 197 | {
|
| 198 | if (dmanr<=3)
|
| 199 | dma_outb(0, DMA1_CLEAR_FF_REG);
|
| 200 | else
|
| 201 | dma_outb(0, DMA2_CLEAR_FF_REG);
|
| 202 | }
|
| 203 |
|
| 204 |
|
| 205 | static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
|
| 206 | {
|
| 207 | if (dmanr<=3)
|
| 208 | dma_outb(mode | dmanr, DMA1_MODE_REG);
|
| 209 | else
|
| 210 | dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
|
| 211 | }
|
| 212 |
|
| 213 | |
| 214 | * This is used for successive transfers when we know the contents of
|
| 215 | * the lower 16 bits of the DMA current address register, but a 64k boundary
|
| 216 | * may have been crossed.
|
| 217 |
|
| 218 | static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
|
| 219 | {
|
| 220 | switch(dmanr) {
|
| 221 | case 0:
|
| 222 | dma_outb(pagenr, DMA_PAGE_0);
|
| 223 | break;
|
| 224 | case 1:
|
| 225 | dma_outb(pagenr, DMA_PAGE_1);
|
| 226 | break;
|
| 227 | case 2:
|
| 228 | dma_outb(pagenr, DMA_PAGE_2);
|
| 229 | break;
|
| 230 | case 3:
|
| 231 | dma_outb(pagenr, DMA_PAGE_3);
|
| 232 | break;
|
| 233 | case 5:
|
| 234 | dma_outb(pagenr & 0xfe, DMA_PAGE_5);
|
| 235 | break;
|
| 236 | case 6:
|
| 237 | dma_outb(pagenr & 0xfe, DMA_PAGE_6);
|
| 238 | break;
|
| 239 | case 7:
|
| 240 | dma_outb(pagenr & 0xfe, DMA_PAGE_7);
|
| 241 | break;
|
| 242 | }
|
| 243 | }
|
| 244 |
|
| 245 |
|
| 246 | |
| 247 | * Assumes dma flipflop is clear.
|
| 248 |
|
| 249 | static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
|
| 250 | {
|
| 251 | set_dma_page(dmanr, a>>16);
|
| 252 | if (dmanr <= 3) {
|
| 253 | dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
|
| 254 | dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
|
| 255 | } else {
|
| 256 | dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
|
| 257 | dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
|
| 258 | }
|
| 259 | }
|
| 260 |
|
| 261 |
|
| 262 | |
| 263 | * a specific DMA channel.
|
| 264 | * You must ensure the parameters are valid.
|
| 265 | * NOTE: from a manual: "the number of transfers is one more
|
| 266 | * than the initial word count"! This is taken into account.
|
| 267 | * Assumes dma flip-flop is clear.
|
| 268 | * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
|
| 269 |
|
| 270 | static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
|
| 271 | {
|
| 272 | count--;
|
| 273 | if (dmanr <= 3) {
|
| 274 | dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
|
| 275 | dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
|
| 276 | } else {
|
| 277 | dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
|
| 278 | dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
|
| 279 | }
|
| 280 | }
|
| 281 |
|
| 282 |
|
| 283 | |
| 284 | * should return zero. Reading this while a DMA transfer is
|
| 285 | * still in progress will return unpredictable results.
|
| 286 | * If called before the channel has been used, it may return 1.
|
| 287 | * Otherwise, it returns the number of _bytes_ left to transfer.
|
| 288 | *
|
| 289 | * Assumes DMA flip-flop is clear.
|
| 290 |
|
| 291 | static __inline__ int get_dma_residue(unsigned int dmanr)
|
| 292 | {
|
| 293 | unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
|
| 294 | : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
|
| 295 |
|
| 296 |
|
| 297 | unsigned short count;
|
| 298 |
|
| 299 | count = 1 + dma_inb(io_port);
|
| 300 | count += dma_inb(io_port) << 8;
|
| 301 |
|
| 302 | return (dmanr<=3)? count : (count<<1);
|
| 303 | }
|
| 304 |
|
| 305 |
|
| 306 |
|
| 307 | extern int request_dma(unsigned int dmanr, const char * device_id);
|
| 308 | extern void free_dma(unsigned int dmanr);
|
| 309 |
|
| 310 | #endif
|