projects/linux·blob master · refs

695 lines · 17.0 KiB

1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2011 by Kevin Cernekee ([email protected])
7 *
8 * SMP support for BMIPS
9 */
10
11#include <linux/init.h>
12#include <linux/sched.h>
13#include <linux/sched/hotplug.h>
14#include <linux/sched/task_stack.h>
15#include <linux/mm.h>
16#include <linux/delay.h>
17#include <linux/smp.h>
18#include <linux/interrupt.h>
19#include <linux/spinlock.h>
20#include <linux/cpu.h>
21#include <linux/cpumask.h>
22#include <linux/reboot.h>
23#include <linux/io.h>
24#include <linux/compiler.h>
25#include <linux/linkage.h>
26#include <linux/bug.h>
27#include <linux/kernel.h>
28#include <linux/kexec.h>
29#include <linux/irq.h>
30
31#include <asm/time.h>
32#include <asm/processor.h>
33#include <asm/bootinfo.h>
34#include <asm/cacheflush.h>
35#include <asm/tlbflush.h>
36#include <asm/mipsregs.h>
37#include <asm/bmips.h>
38#include <asm/traps.h>
39#include <asm/barrier.h>
40#include <asm/cpu-features.h>
41
42static int __maybe_unused max_cpus = 1;
43
44/* these may be configured by the platform code */
45int bmips_smp_enabled = 1;
46int bmips_cpu_offset;
47cpumask_t bmips_booted_mask;
48unsigned long bmips_tp1_irqs = IE_IRQ1;
49
50#define RESET_FROM_KSEG0 0x80080800
51#define RESET_FROM_KSEG1 0xa0080800
52
53static void bmips_set_reset_vec(int cpu, u32 val);
54
55#ifdef CONFIG_SMP
56
57#include <asm/smp.h>
58
59/* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */
60unsigned long bmips_smp_boot_sp;
61unsigned long bmips_smp_boot_gp;
62
63static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
64static void bmips5000_send_ipi_single(int cpu, unsigned int action);
65static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
66static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
67
68/* SW interrupts 0,1 are used for interprocessor signaling */
69#define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0)
70#define IPI1_IRQ (MIPS_CPU_IRQ_BASE + 1)
71
72#define CPUNUM(cpu, shift) (((cpu) + bmips_cpu_offset) << (shift))
73#define ACTION_CLR_IPI(cpu, ipi) (0x2000 | CPUNUM(cpu, 9) | ((ipi) << 8))
74#define ACTION_SET_IPI(cpu, ipi) (0x3000 | CPUNUM(cpu, 9) | ((ipi) << 8))
75#define ACTION_BOOT_THREAD(cpu) (0x08 | CPUNUM(cpu, 0))
76
77static void __init bmips_smp_setup(void)
78{
79 int i, cpu = 1, boot_cpu = 0;
80 int cpu_hw_intr;
81
82 switch (current_cpu_type()) {
83 case CPU_BMIPS4350:
84 case CPU_BMIPS4380:
85 /* arbitration priority */
86 clear_c0_brcm_cmt_ctrl(0x30);
87
88 /* NBK and weak order flags */
89 set_c0_brcm_config_0(0x30000);
90
91 /* Find out if we are running on TP0 or TP1 */
92 boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
93
94 /*
95 * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
96 * thread
97 * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
98 * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
99 */
100 if (boot_cpu == 0)
101 cpu_hw_intr = 0x02;
102 else
103 cpu_hw_intr = 0x1d;
104
105 change_c0_brcm_cmt_intr(0xf8018000,
106 (cpu_hw_intr << 27) | (0x03 << 15));
107
108 /* single core, 2 threads (2 pipelines) */
109 max_cpus = 2;
110
111 break;
112 case CPU_BMIPS5000:
113 /* enable raceless SW interrupts */
114 set_c0_brcm_config(0x03 << 22);
115
116 /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
117 change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
118
119 /* N cores, 2 threads per core */
120 max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
121
122 /* clear any pending SW interrupts */
123 for (i = 0; i < max_cpus; i++) {
124 write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
125 write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
126 }
127
128 break;
129 default:
130 max_cpus = 1;
131 }
132
133 if (!bmips_smp_enabled)
134 max_cpus = 1;
135
136 /* this can be overridden by the BSP */
137 if (!board_ebase_setup)
138 board_ebase_setup = &bmips_ebase_setup;
139
140 if (max_cpus > 1) {
141 __cpu_number_map[boot_cpu] = 0;
142 __cpu_logical_map[0] = boot_cpu;
143
144 for (i = 0; i < max_cpus; i++) {
145 if (i != boot_cpu) {
146 __cpu_number_map[i] = cpu;
147 __cpu_logical_map[cpu] = i;
148 cpu++;
149 }
150 set_cpu_possible(i, 1);
151 set_cpu_present(i, 1);
152 }
153 } else {
154 __cpu_number_map[0] = boot_cpu;
155 __cpu_logical_map[0] = 0;
156 set_cpu_possible(0, 1);
157 set_cpu_present(0, 1);
158 }
159}
160
161/*
162 * IPI IRQ setup - runs on CPU0
163 */
164static void bmips_prepare_cpus(unsigned int max_cpus)
165{
166 irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
167
168 switch (current_cpu_type()) {
169 case CPU_BMIPS4350:
170 case CPU_BMIPS4380:
171 bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
172 break;
173 case CPU_BMIPS5000:
174 bmips_ipi_interrupt = bmips5000_ipi_interrupt;
175 break;
176 default:
177 return;
178 }
179
180 if (request_irq(IPI0_IRQ, bmips_ipi_interrupt,
181 IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi0", NULL))
182 panic("Can't request IPI0 interrupt");
183 if (request_irq(IPI1_IRQ, bmips_ipi_interrupt,
184 IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi1", NULL))
185 panic("Can't request IPI1 interrupt");
186}
187
188/*
189 * Tell the hardware to boot CPUx - runs on CPU0
190 */
191static int bmips_boot_secondary(int cpu, struct task_struct *idle)
192{
193 bmips_smp_boot_sp = __KSTK_TOS(idle);
194 bmips_smp_boot_gp = (unsigned long)task_thread_info(idle);
195 mb();
196
197 /*
198 * Initial boot sequence for secondary CPU:
199 * bmips_reset_nmi_vec @ a000_0000 ->
200 * bmips_smp_entry ->
201 * plat_wired_tlb_setup (cached function call; optional) ->
202 * start_secondary (cached jump)
203 *
204 * Warm restart sequence:
205 * play_dead WAIT loop ->
206 * bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC ->
207 * eret to play_dead ->
208 * bmips_secondary_reentry ->
209 * start_secondary
210 */
211
212 pr_info("SMP: Booting CPU%d...\n", cpu);
213
214 if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
215 /* kseg1 might not exist if this CPU enabled XKS01 */
216 bmips_set_reset_vec(cpu, RESET_FROM_KSEG0);
217
218 switch (current_cpu_type()) {
219 case CPU_BMIPS4350:
220 case CPU_BMIPS4380:
221 bmips43xx_send_ipi_single(cpu, 0);
222 break;
223 case CPU_BMIPS5000:
224 bmips5000_send_ipi_single(cpu, 0);
225 break;
226 }
227 } else {
228 bmips_set_reset_vec(cpu, RESET_FROM_KSEG1);
229
230 switch (current_cpu_type()) {
231 case CPU_BMIPS4350:
232 case CPU_BMIPS4380:
233 /* Reset slave TP1 if booting from TP0 */
234 if (cpu_logical_map(cpu) == 1)
235 set_c0_brcm_cmt_ctrl(0x01);
236 break;
237 case CPU_BMIPS5000:
238 write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
239 break;
240 }
241 cpumask_set_cpu(cpu, &bmips_booted_mask);
242 }
243
244 return 0;
245}
246
247/*
248 * Early setup - runs on secondary CPU after cache probe
249 */
250static void bmips_init_secondary(void)
251{
252 bmips_cpu_setup();
253
254 switch (current_cpu_type()) {
255 case CPU_BMIPS4350:
256 case CPU_BMIPS4380:
257 clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
258 break;
259 case CPU_BMIPS5000:
260 write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
261 cpu_set_core(&current_cpu_data, (read_c0_brcm_config() >> 25) & 3);
262 break;
263 }
264}
265
266/*
267 * Late setup - runs on secondary CPU before entering the idle loop
268 */
269static void bmips_smp_finish(void)
270{
271 pr_info("SMP: CPU%d is running\n", smp_processor_id());
272
273 /* make sure there won't be a timer interrupt for a little while */
274 write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
275
276 irq_enable_hazard();
277 set_c0_status(IE_SW0 | IE_SW1 | bmips_tp1_irqs | IE_IRQ5 | ST0_IE);
278 irq_enable_hazard();
279}
280
281/*
282 * BMIPS5000 raceless IPIs
283 *
284 * Each CPU has two inbound SW IRQs which are independent of all other CPUs.
285 * IPI0 is used for SMP_RESCHEDULE_YOURSELF
286 * IPI1 is used for SMP_CALL_FUNCTION
287 */
288
289static void bmips5000_send_ipi_single(int cpu, unsigned int action)
290{
291 write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
292}
293
294static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
295{
296 int action = irq - IPI0_IRQ;
297
298 write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action));
299
300 if (action == 0)
301 scheduler_ipi();
302 else
303 generic_smp_call_function_interrupt();
304
305 return IRQ_HANDLED;
306}
307
308static void bmips5000_send_ipi_mask(const struct cpumask *mask,
309 unsigned int action)
310{
311 unsigned int i;
312
313 for_each_cpu(i, mask)
314 bmips5000_send_ipi_single(i, action);
315}
316
317/*
318 * BMIPS43xx racey IPIs
319 *
320 * We use one inbound SW IRQ for each CPU.
321 *
322 * A spinlock must be held in order to keep CPUx from accidentally clearing
323 * an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy. The
324 * same spinlock is used to protect the action masks.
325 */
326
327static DEFINE_SPINLOCK(ipi_lock);
328static DEFINE_PER_CPU(int, ipi_action_mask);
329
330static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
331{
332 unsigned long flags;
333
334 spin_lock_irqsave(&ipi_lock, flags);
335 set_c0_cause(cpu ? C_SW1 : C_SW0);
336 per_cpu(ipi_action_mask, cpu) |= action;
337 irq_enable_hazard();
338 spin_unlock_irqrestore(&ipi_lock, flags);
339}
340
341static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
342{
343 unsigned long flags;
344 int action, cpu = irq - IPI0_IRQ;
345
346 spin_lock_irqsave(&ipi_lock, flags);
347 action = __this_cpu_read(ipi_action_mask);
348 per_cpu(ipi_action_mask, cpu) = 0;
349 clear_c0_cause(cpu ? C_SW1 : C_SW0);
350 spin_unlock_irqrestore(&ipi_lock, flags);
351
352 if (action & SMP_RESCHEDULE_YOURSELF)
353 scheduler_ipi();
354 if (action & SMP_CALL_FUNCTION)
355 generic_smp_call_function_interrupt();
356
357 return IRQ_HANDLED;
358}
359
360static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
361 unsigned int action)
362{
363 unsigned int i;
364
365 for_each_cpu(i, mask)
366 bmips43xx_send_ipi_single(i, action);
367}
368
369#ifdef CONFIG_HOTPLUG_CPU
370
371static int bmips_cpu_disable(void)
372{
373 unsigned int cpu = smp_processor_id();
374
375 pr_info("SMP: CPU%d is offline\n", cpu);
376
377 set_cpu_online(cpu, false);
378 calculate_cpu_foreign_map();
379 irq_migrate_all_off_this_cpu();
380 clear_c0_status(IE_IRQ5);
381
382 local_flush_tlb_all();
383 local_flush_icache_range(0, ~0);
384
385 return 0;
386}
387
388static void bmips_cpu_die(unsigned int cpu)
389{
390}
391
392void __ref play_dead(void)
393{
394 idle_task_exit();
395 cpuhp_ap_report_dead();
396
397 /* flush data cache */
398 _dma_cache_wback_inv(0, ~0);
399
400 /*
401 * Wakeup is on SW0 or SW1; disable everything else
402 * Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux
403 * IRQ handlers; this clears ST0_IE and returns immediately.
404 */
405 clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1);
406 change_c0_status(
407 IE_IRQ5 | bmips_tp1_irqs | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV,
408 IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV);
409 irq_disable_hazard();
410
411 /*
412 * wait for SW interrupt from bmips_boot_secondary(), then jump
413 * back to start_secondary()
414 */
415 __asm__ __volatile__(
416 " wait\n"
417 " j bmips_secondary_reentry\n"
418 : : : "memory");
419
420 BUG();
421}
422
423#endif /* CONFIG_HOTPLUG_CPU */
424
425const struct plat_smp_ops bmips43xx_smp_ops = {
426 .smp_setup = bmips_smp_setup,
427 .prepare_cpus = bmips_prepare_cpus,
428 .boot_secondary = bmips_boot_secondary,
429 .smp_finish = bmips_smp_finish,
430 .init_secondary = bmips_init_secondary,
431 .send_ipi_single = bmips43xx_send_ipi_single,
432 .send_ipi_mask = bmips43xx_send_ipi_mask,
433#ifdef CONFIG_HOTPLUG_CPU
434 .cpu_disable = bmips_cpu_disable,
435 .cpu_die = bmips_cpu_die,
436#endif
437#ifdef CONFIG_KEXEC_CORE
438 .kexec_nonboot_cpu = kexec_nonboot_cpu_jump,
439#endif
440};
441
442const struct plat_smp_ops bmips5000_smp_ops = {
443 .smp_setup = bmips_smp_setup,
444 .prepare_cpus = bmips_prepare_cpus,
445 .boot_secondary = bmips_boot_secondary,
446 .smp_finish = bmips_smp_finish,
447 .init_secondary = bmips_init_secondary,
448 .send_ipi_single = bmips5000_send_ipi_single,
449 .send_ipi_mask = bmips5000_send_ipi_mask,
450#ifdef CONFIG_HOTPLUG_CPU
451 .cpu_disable = bmips_cpu_disable,
452 .cpu_die = bmips_cpu_die,
453#endif
454#ifdef CONFIG_KEXEC_CORE
455 .kexec_nonboot_cpu = kexec_nonboot_cpu_jump,
456#endif
457};
458
459#endif /* CONFIG_SMP */
460
461/***********************************************************************
462 * BMIPS vector relocation
463 * This is primarily used for SMP boot, but it is applicable to some
464 * UP BMIPS systems as well.
465 ***********************************************************************/
466
467static void bmips_wr_vec(unsigned long dst, char *start, char *end)
468{
469 memcpy((void *)dst, start, end - start);
470 dma_cache_wback(dst, end - start);
471 local_flush_icache_range(dst, dst + (end - start));
472 instruction_hazard();
473}
474
475static inline void bmips_nmi_handler_setup(void)
476{
477 bmips_wr_vec(BMIPS_NMI_RESET_VEC, bmips_reset_nmi_vec,
478 bmips_reset_nmi_vec_end);
479 bmips_wr_vec(BMIPS_WARM_RESTART_VEC, bmips_smp_int_vec,
480 bmips_smp_int_vec_end);
481}
482
483struct reset_vec_info {
484 int cpu;
485 u32 val;
486};
487
488static void bmips_set_reset_vec_remote(void *vinfo)
489{
490 struct reset_vec_info *info = vinfo;
491 int shift = info->cpu & 0x01 ? 16 : 0;
492 u32 mask = ~(0xffff << shift), val = info->val >> 16;
493
494 preempt_disable();
495 if (smp_processor_id() > 0) {
496 smp_call_function_single(0, &bmips_set_reset_vec_remote,
497 info, 1);
498 } else {
499 if (info->cpu & 0x02) {
500 /* BMIPS5200 "should" use mask/shift, but it's buggy */
501 bmips_write_zscm_reg(0xa0, (val << 16) | val);
502 bmips_read_zscm_reg(0xa0);
503 } else {
504 write_c0_brcm_bootvec((read_c0_brcm_bootvec() & mask) |
505 (val << shift));
506 }
507 }
508 preempt_enable();
509}
510
511static void bmips_set_reset_vec(int cpu, u32 val)
512{
513 struct reset_vec_info info;
514
515 if (current_cpu_type() == CPU_BMIPS5000) {
516 /* this needs to run from CPU0 (which is always online) */
517 info.cpu = cpu;
518 info.val = val;
519 bmips_set_reset_vec_remote(&info);
520 } else {
521 void __iomem *cbr = bmips_cbr_addr;
522
523 if (cpu == 0)
524 __raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
525 else {
526 if (current_cpu_type() != CPU_BMIPS4380)
527 return;
528 __raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
529 }
530 }
531 __sync();
532 back_to_back_c0_hazard();
533}
534
535void bmips_ebase_setup(void)
536{
537 unsigned long new_ebase = ebase;
538
539 BUG_ON(ebase != CKSEG0);
540
541 switch (current_cpu_type()) {
542 case CPU_BMIPS4350:
543 /*
544 * BMIPS4350 cannot relocate the normal vectors, but it
545 * can relocate the BEV=1 vectors. So CPU1 starts up at
546 * the relocated BEV=1, IV=0 general exception vector @
547 * 0xa000_0380.
548 *
549 * set_uncached_handler() is used here because:
550 * - CPU1 will run this from uncached space
551 * - None of the cacheflush functions are set up yet
552 */
553 set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
554 &bmips_smp_int_vec, 0x80);
555 __sync();
556 return;
557 case CPU_BMIPS3300:
558 case CPU_BMIPS4380:
559 /*
560 * 0x8000_0000: reset/NMI (initially in kseg1)
561 * 0x8000_0400: normal vectors
562 */
563 new_ebase = 0x80000400;
564 bmips_set_reset_vec(0, RESET_FROM_KSEG0);
565 break;
566 case CPU_BMIPS5000:
567 /*
568 * 0x8000_0000: reset/NMI (initially in kseg1)
569 * 0x8000_1000: normal vectors
570 */
571 new_ebase = 0x80001000;
572 bmips_set_reset_vec(0, RESET_FROM_KSEG0);
573 write_c0_ebase(new_ebase);
574 break;
575 default:
576 return;
577 }
578
579 board_nmi_handler_setup = &bmips_nmi_handler_setup;
580 ebase = new_ebase;
581}
582
583asmlinkage void __weak plat_wired_tlb_setup(void)
584{
585 /*
586 * Called when starting/restarting a secondary CPU.
587 * Kernel stacks and other important data might only be accessible
588 * once the wired entries are present.
589 */
590}
591
592void bmips_cpu_setup(void)
593{
594 void __iomem __maybe_unused *cbr = bmips_cbr_addr;
595 u32 __maybe_unused rac_addr;
596 u32 __maybe_unused cfg;
597
598 switch (current_cpu_type()) {
599 case CPU_BMIPS3300:
600 /* Set BIU to async mode */
601 set_c0_brcm_bus_pll(BIT(22));
602 __sync();
603
604 /* put the BIU back in sync mode */
605 clear_c0_brcm_bus_pll(BIT(22));
606
607 /* clear BHTD to enable branch history table */
608 clear_c0_brcm_reset(BIT(16));
609
610 /* Flush and enable RAC */
611 cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
612 __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
613 __raw_readl(cbr + BMIPS_RAC_CONFIG);
614
615 cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
616 __raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG);
617 __raw_readl(cbr + BMIPS_RAC_CONFIG);
618
619 cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
620 __raw_writel(cfg | 0x0fff0000, cbr + BMIPS_RAC_ADDRESS_RANGE);
621 __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
622 break;
623
624 case CPU_BMIPS4350:
625 rac_addr = BMIPS_RAC_CONFIG_1;
626
627 if (!(read_c0_brcm_cmt_local() & (1 << 31)))
628 rac_addr = BMIPS_RAC_CONFIG;
629
630 /* Enable data RAC */
631 cfg = __raw_readl(cbr + rac_addr);
632 __raw_writel(cfg | 0xf, cbr + rac_addr);
633 __raw_readl(cbr + rac_addr);
634
635 /* Flush stale data out of the readahead cache */
636 cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
637 __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
638 __raw_readl(cbr + BMIPS_RAC_CONFIG);
639 break;
640
641 case CPU_BMIPS4380:
642 /* CBG workaround for early BMIPS4380 CPUs */
643 switch (read_c0_prid()) {
644 case 0x2a040:
645 case 0x2a042:
646 case 0x2a044:
647 case 0x2a060:
648 cfg = __raw_readl(cbr + BMIPS_L2_CONFIG);
649 __raw_writel(cfg & ~0x07000000, cbr + BMIPS_L2_CONFIG);
650 __raw_readl(cbr + BMIPS_L2_CONFIG);
651 }
652
653 /* clear BHTD to enable branch history table */
654 clear_c0_brcm_config_0(BIT(21));
655
656 /* XI/ROTR enable */
657 set_c0_brcm_config_0(BIT(23));
658 set_c0_brcm_cmt_ctrl(BIT(15));
659 break;
660
661 case CPU_BMIPS5000:
662 /* enable RDHWR, BRDHWR */
663 set_c0_brcm_config(BIT(17) | BIT(21));
664
665 /* Disable JTB */
666 __asm__ __volatile__(
667 " .set noreorder\n"
668 " li $8, 0x5a455048\n"
669 " .word 0x4088b00f\n" /* mtc0 t0, $22, 15 */
670 " .word 0x4008b008\n" /* mfc0 t0, $22, 8 */
671 " li $9, 0x00008000\n"
672 " or $8, $8, $9\n"
673 " .word 0x4088b008\n" /* mtc0 t0, $22, 8 */
674 " sync\n"
675 " li $8, 0x0\n"
676 " .word 0x4088b00f\n" /* mtc0 t0, $22, 15 */
677 " .set reorder\n"
678 : : : "$8", "$9");
679
680 /* XI enable */
681 set_c0_brcm_config(BIT(27));
682
683 /* enable MIPS32R2 ROR instruction for XI TLB handlers */
684 __asm__ __volatile__(
685 " li $8, 0x5a455048\n"
686 " .word 0x4088b00f\n" /* mtc0 $8, $22, 15 */
687 " nop; nop; nop\n"
688 " .word 0x4008b008\n" /* mfc0 $8, $22, 8 */
689 " lui $9, 0x0100\n"
690 " or $8, $9\n"
691 " .word 0x4088b008\n" /* mtc0 $8, $22, 8 */
692 : : : "$8", "$9");
693 break;
694 }
695}