| 1 | # SPDX-License-Identifier: GPL-2.0 |
| 2 | config SUPERH |
| 3 | def_bool y |
| 4 | select ARCH_32BIT_OFF_T |
| 5 | select ARCH_HAS_CPU_CACHE_ALIASING |
| 6 | select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A) |
| 7 | select ARCH_HAS_BINFMT_FLAT if !MMU |
| 8 | select ARCH_HAS_CPU_FINALIZE_INIT |
| 9 | select ARCH_HAS_CURRENT_STACK_POINTER |
| 10 | select ARCH_HAS_GIGANTIC_PAGE |
| 11 | select ARCH_HAS_GCOV_PROFILE_ALL |
| 12 | select ARCH_HAS_PTE_SPECIAL |
| 13 | select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST |
| 14 | select ARCH_HIBERNATION_POSSIBLE if MMU |
| 15 | select ARCH_MIGHT_HAVE_PC_PARPORT |
| 16 | select ARCH_WANT_IPC_PARSE_VERSION |
| 17 | select ARCH_NEED_CMPXCHG_1_EMU |
| 18 | select CPU_NO_EFFICIENT_FFS |
| 19 | select DMA_DECLARE_COHERENT |
| 20 | select GENERIC_ATOMIC64 |
| 21 | select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST |
| 22 | select GENERIC_IDLE_POLL_SETUP |
| 23 | select GENERIC_IRQ_SHOW |
| 24 | select GENERIC_LIB_ASHLDI3 |
| 25 | select GENERIC_LIB_ASHRDI3 |
| 26 | select GENERIC_LIB_LSHRDI3 |
| 27 | select GENERIC_PCI_IOMAP if PCI |
| 28 | select GENERIC_SCHED_CLOCK |
| 29 | select GENERIC_SMP_IDLE_THREAD |
| 30 | select GUP_GET_PXX_LOW_HIGH if X2TLB |
| 31 | select HAS_IOPORT if HAS_IOPORT_MAP |
| 32 | select GENERIC_IOREMAP if MMU |
| 33 | select HAVE_ARCH_AUDITSYSCALL |
| 34 | select HAVE_ARCH_KGDB |
| 35 | select HAVE_ARCH_SECCOMP_FILTER |
| 36 | select HAVE_ARCH_TRACEHOOK |
| 37 | select HAVE_DEBUG_BUGVERBOSE |
| 38 | select HAVE_DEBUG_KMEMLEAK |
| 39 | select HAVE_DYNAMIC_FTRACE |
| 40 | select HAVE_GUP_FAST if MMU |
| 41 | select HAVE_FUNCTION_GRAPH_TRACER |
| 42 | select HAVE_FUNCTION_TRACER |
| 43 | select HAVE_HW_BREAKPOINT |
| 44 | select HAVE_IOREMAP_PROT if MMU && !X2TLB |
| 45 | select HAVE_KERNEL_BZIP2 |
| 46 | select HAVE_KERNEL_GZIP |
| 47 | select HAVE_KERNEL_LZMA |
| 48 | select HAVE_KERNEL_LZO |
| 49 | select HAVE_KERNEL_XZ |
| 50 | select HAVE_KPROBES |
| 51 | select HAVE_KRETPROBES |
| 52 | select HAVE_MIXED_BREAKPOINTS_REGS |
| 53 | select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER |
| 54 | select HAVE_NMI |
| 55 | select HAVE_PATA_PLATFORM |
| 56 | select HAVE_PERF_EVENTS |
| 57 | select HAVE_REGS_AND_STACK_ACCESS_API |
| 58 | select HAVE_UID16 |
| 59 | select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS |
| 60 | select HAVE_STACKPROTECTOR |
| 61 | select HAVE_SYSCALL_TRACEPOINTS |
| 62 | select IRQ_FORCED_THREADING |
| 63 | select LOCK_MM_AND_FIND_VMA |
| 64 | select MODULES_USE_ELF_RELA |
| 65 | select NEED_SG_DMA_LENGTH |
| 66 | select NO_DMA if !MMU && !DMA_COHERENT |
| 67 | select NO_GENERIC_PCI_IOPORT_MAP if PCI |
| 68 | select OLD_SIGACTION |
| 69 | select OLD_SIGSUSPEND |
| 70 | select PCI_DOMAINS if PCI |
| 71 | select PERF_EVENTS |
| 72 | select PERF_USE_VMALLOC |
| 73 | select RTC_LIB |
| 74 | select SPARSE_IRQ |
| 75 | select TRACE_IRQFLAGS_SUPPORT |
| 76 | help |
| 77 | The SuperH is a RISC processor targeted for use in embedded systems |
| 78 | and consumer electronics; it was also used in the Sega Dreamcast |
| 79 | gaming console. The SuperH port has a home page at |
| 80 | <http://www.linux-sh.org/>. |
| 81 | |
| 82 | config GENERIC_BUG |
| 83 | def_bool y |
| 84 | depends on BUG |
| 85 | |
| 86 | config GENERIC_HWEIGHT |
| 87 | def_bool y |
| 88 | |
| 89 | config GENERIC_CALIBRATE_DELAY |
| 90 | bool |
| 91 | |
| 92 | config GENERIC_LOCKBREAK |
| 93 | def_bool y |
| 94 | depends on SMP && PREEMPTION |
| 95 | |
| 96 | config ARCH_SUSPEND_POSSIBLE |
| 97 | def_bool n |
| 98 | |
| 99 | config ARCH_HIBERNATION_POSSIBLE |
| 100 | def_bool n |
| 101 | |
| 102 | config SYS_SUPPORTS_APM_EMULATION |
| 103 | bool |
| 104 | select ARCH_SUSPEND_POSSIBLE |
| 105 | |
| 106 | config SYS_SUPPORTS_SMP |
| 107 | bool |
| 108 | |
| 109 | config SYS_SUPPORTS_NUMA |
| 110 | bool |
| 111 | |
| 112 | config STACKTRACE_SUPPORT |
| 113 | def_bool y |
| 114 | |
| 115 | config LOCKDEP_SUPPORT |
| 116 | def_bool y |
| 117 | |
| 118 | config ARCH_HAS_ILOG2_U32 |
| 119 | def_bool n |
| 120 | |
| 121 | config ARCH_HAS_ILOG2_U64 |
| 122 | def_bool n |
| 123 | |
| 124 | config NO_IOPORT_MAP |
| 125 | def_bool !PCI |
| 126 | depends on !SH_SHMIN && !SH_HP6XX && !SH_SOLUTION_ENGINE && \ |
| 127 | !SH_DREAMCAST |
| 128 | |
| 129 | config IO_TRAPPED |
| 130 | bool |
| 131 | |
| 132 | config SWAP_IO_SPACE |
| 133 | bool |
| 134 | |
| 135 | config DMA_COHERENT |
| 136 | bool |
| 137 | |
| 138 | config DMA_NONCOHERENT |
| 139 | def_bool !NO_DMA && !DMA_COHERENT |
| 140 | select ARCH_HAS_DMA_PREP_COHERENT |
| 141 | select ARCH_HAS_SYNC_DMA_FOR_DEVICE |
| 142 | select DMA_DIRECT_REMAP |
| 143 | |
| 144 | config PGTABLE_LEVELS |
| 145 | default 3 if X2TLB |
| 146 | default 2 |
| 147 | |
| 148 | menu "System type" |
| 149 | |
| 150 | # |
| 151 | # Processor families |
| 152 | # |
| 153 | config CPU_SH2 |
| 154 | bool |
| 155 | select SH_INTC |
| 156 | |
| 157 | config CPU_SH2A |
| 158 | bool |
| 159 | select CPU_SH2 |
| 160 | select UNCACHED_MAPPING |
| 161 | |
| 162 | config CPU_J2 |
| 163 | bool |
| 164 | select CPU_SH2 |
| 165 | select OF |
| 166 | select OF_EARLY_FLATTREE |
| 167 | |
| 168 | config CPU_SH3 |
| 169 | bool |
| 170 | select CPU_HAS_INTEVT |
| 171 | select CPU_HAS_SR_RB |
| 172 | select SH_INTC |
| 173 | select SYS_SUPPORTS_SH_TMU |
| 174 | |
| 175 | config CPU_SH4 |
| 176 | bool |
| 177 | select ARCH_SUPPORTS_HUGETLBFS if MMU |
| 178 | select CPU_HAS_INTEVT |
| 179 | select CPU_HAS_SR_RB |
| 180 | select CPU_HAS_FPU if !CPU_SH4AL_DSP |
| 181 | select SH_INTC |
| 182 | select SYS_SUPPORTS_SH_TMU |
| 183 | |
| 184 | config CPU_SH4A |
| 185 | bool |
| 186 | select CPU_SH4 |
| 187 | |
| 188 | config CPU_SH4AL_DSP |
| 189 | bool |
| 190 | select CPU_SH4A |
| 191 | select CPU_HAS_DSP |
| 192 | |
| 193 | config CPU_SHX2 |
| 194 | bool |
| 195 | |
| 196 | config CPU_SHX3 |
| 197 | bool |
| 198 | select DMA_COHERENT |
| 199 | select SYS_SUPPORTS_SMP |
| 200 | select SYS_SUPPORTS_NUMA |
| 201 | |
| 202 | config ARCH_SHMOBILE |
| 203 | bool |
| 204 | select ARCH_SUSPEND_POSSIBLE |
| 205 | select PM |
| 206 | |
| 207 | config CPU_HAS_PMU |
| 208 | depends on CPU_SH4 || CPU_SH4A |
| 209 | default y |
| 210 | bool |
| 211 | |
| 212 | choice |
| 213 | prompt "Processor sub-type selection" |
| 214 | |
| 215 | # |
| 216 | # Processor subtypes |
| 217 | # |
| 218 | |
| 219 | # SH-2 Processor Support |
| 220 | |
| 221 | config CPU_SUBTYPE_SH7619 |
| 222 | bool "Support SH7619 processor" |
| 223 | select CPU_SH2 |
| 224 | select SYS_SUPPORTS_SH_CMT |
| 225 | |
| 226 | config CPU_SUBTYPE_J2 |
| 227 | bool "Support J2 processor" |
| 228 | select CPU_J2 |
| 229 | select SYS_SUPPORTS_SMP |
| 230 | select GENERIC_CLOCKEVENTS_BROADCAST if SMP |
| 231 | |
| 232 | # SH-2A Processor Support |
| 233 | |
| 234 | config CPU_SUBTYPE_SH7201 |
| 235 | bool "Support SH7201 processor" |
| 236 | select CPU_SH2A |
| 237 | select CPU_HAS_FPU |
| 238 | select SYS_SUPPORTS_SH_MTU2 |
| 239 | |
| 240 | config CPU_SUBTYPE_SH7203 |
| 241 | bool "Support SH7203 processor" |
| 242 | select CPU_SH2A |
| 243 | select CPU_HAS_FPU |
| 244 | select SYS_SUPPORTS_SH_CMT |
| 245 | select SYS_SUPPORTS_SH_MTU2 |
| 246 | select PINCTRL |
| 247 | |
| 248 | config CPU_SUBTYPE_SH7206 |
| 249 | bool "Support SH7206 processor" |
| 250 | select CPU_SH2A |
| 251 | select SYS_SUPPORTS_SH_CMT |
| 252 | select SYS_SUPPORTS_SH_MTU2 |
| 253 | |
| 254 | config CPU_SUBTYPE_SH7263 |
| 255 | bool "Support SH7263 processor" |
| 256 | select CPU_SH2A |
| 257 | select CPU_HAS_FPU |
| 258 | select SYS_SUPPORTS_SH_CMT |
| 259 | select SYS_SUPPORTS_SH_MTU2 |
| 260 | |
| 261 | config CPU_SUBTYPE_SH7264 |
| 262 | bool "Support SH7264 processor" |
| 263 | select CPU_SH2A |
| 264 | select CPU_HAS_FPU |
| 265 | select SYS_SUPPORTS_SH_CMT |
| 266 | select SYS_SUPPORTS_SH_MTU2 |
| 267 | select PINCTRL |
| 268 | |
| 269 | config CPU_SUBTYPE_SH7269 |
| 270 | bool "Support SH7269 processor" |
| 271 | select CPU_SH2A |
| 272 | select CPU_HAS_FPU |
| 273 | select SYS_SUPPORTS_SH_CMT |
| 274 | select SYS_SUPPORTS_SH_MTU2 |
| 275 | select PINCTRL |
| 276 | |
| 277 | config CPU_SUBTYPE_MXG |
| 278 | bool "Support MX-G processor" |
| 279 | select CPU_SH2A |
| 280 | select SYS_SUPPORTS_SH_MTU2 |
| 281 | help |
| 282 | Select MX-G if running on an R8A03022BG part. |
| 283 | |
| 284 | # SH-3 Processor Support |
| 285 | |
| 286 | config CPU_SUBTYPE_SH7705 |
| 287 | bool "Support SH7705 processor" |
| 288 | select CPU_SH3 |
| 289 | |
| 290 | config CPU_SUBTYPE_SH7706 |
| 291 | bool "Support SH7706 processor" |
| 292 | select CPU_SH3 |
| 293 | help |
| 294 | Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. |
| 295 | |
| 296 | config CPU_SUBTYPE_SH7707 |
| 297 | bool "Support SH7707 processor" |
| 298 | select CPU_SH3 |
| 299 | help |
| 300 | Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU. |
| 301 | |
| 302 | config CPU_SUBTYPE_SH7708 |
| 303 | bool "Support SH7708 processor" |
| 304 | select CPU_SH3 |
| 305 | help |
| 306 | Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or |
| 307 | if you have a 100 Mhz SH-3 HD6417708R CPU. |
| 308 | |
| 309 | config CPU_SUBTYPE_SH7709 |
| 310 | bool "Support SH7709 processor" |
| 311 | select CPU_SH3 |
| 312 | help |
| 313 | Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. |
| 314 | |
| 315 | config CPU_SUBTYPE_SH7710 |
| 316 | bool "Support SH7710 processor" |
| 317 | select CPU_SH3 |
| 318 | select CPU_HAS_DSP |
| 319 | help |
| 320 | Select SH7710 if you have a SH3-DSP SH7710 CPU. |
| 321 | |
| 322 | config CPU_SUBTYPE_SH7712 |
| 323 | bool "Support SH7712 processor" |
| 324 | select CPU_SH3 |
| 325 | select CPU_HAS_DSP |
| 326 | help |
| 327 | Select SH7712 if you have a SH3-DSP SH7712 CPU. |
| 328 | |
| 329 | config CPU_SUBTYPE_SH7720 |
| 330 | bool "Support SH7720 processor" |
| 331 | select CPU_SH3 |
| 332 | select CPU_HAS_DSP |
| 333 | select SYS_SUPPORTS_SH_CMT |
| 334 | select USB_OHCI_SH if USB_OHCI_HCD |
| 335 | select PINCTRL |
| 336 | help |
| 337 | Select SH7720 if you have a SH3-DSP SH7720 CPU. |
| 338 | |
| 339 | config CPU_SUBTYPE_SH7721 |
| 340 | bool "Support SH7721 processor" |
| 341 | select CPU_SH3 |
| 342 | select CPU_HAS_DSP |
| 343 | select SYS_SUPPORTS_SH_CMT |
| 344 | select USB_OHCI_SH if USB_OHCI_HCD |
| 345 | help |
| 346 | Select SH7721 if you have a SH3-DSP SH7721 CPU. |
| 347 | |
| 348 | # SH-4 Processor Support |
| 349 | |
| 350 | config CPU_SUBTYPE_SH7750 |
| 351 | bool "Support SH7750 processor" |
| 352 | select CPU_SH4 |
| 353 | help |
| 354 | Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. |
| 355 | |
| 356 | config CPU_SUBTYPE_SH7091 |
| 357 | bool "Support SH7091 processor" |
| 358 | select CPU_SH4 |
| 359 | help |
| 360 | Select SH7091 if you have an SH-4 based Sega device (such as |
| 361 | the Dreamcast, Naomi, and Naomi 2). |
| 362 | |
| 363 | config CPU_SUBTYPE_SH7750R |
| 364 | bool "Support SH7750R processor" |
| 365 | select CPU_SH4 |
| 366 | |
| 367 | config CPU_SUBTYPE_SH7750S |
| 368 | bool "Support SH7750S processor" |
| 369 | select CPU_SH4 |
| 370 | |
| 371 | config CPU_SUBTYPE_SH7751 |
| 372 | bool "Support SH7751 processor" |
| 373 | select CPU_SH4 |
| 374 | help |
| 375 | Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, |
| 376 | or if you have a HD6417751R CPU. |
| 377 | |
| 378 | config CPU_SUBTYPE_SH7751R |
| 379 | bool "Support SH7751R processor" |
| 380 | select CPU_SH4 |
| 381 | |
| 382 | config CPU_SUBTYPE_SH7760 |
| 383 | bool "Support SH7760 processor" |
| 384 | select CPU_SH4 |
| 385 | |
| 386 | # SH-4A Processor Support |
| 387 | |
| 388 | config CPU_SUBTYPE_SH7723 |
| 389 | bool "Support SH7723 processor" |
| 390 | select CPU_SH4A |
| 391 | select CPU_SHX2 |
| 392 | select ARCH_SHMOBILE |
| 393 | select ARCH_SPARSEMEM_ENABLE |
| 394 | select SYS_SUPPORTS_SH_CMT |
| 395 | select PINCTRL |
| 396 | help |
| 397 | Select SH7723 if you have an SH-MobileR2 CPU. |
| 398 | |
| 399 | config CPU_SUBTYPE_SH7724 |
| 400 | bool "Support SH7724 processor" |
| 401 | select CPU_SH4A |
| 402 | select CPU_SHX2 |
| 403 | select ARCH_SHMOBILE |
| 404 | select ARCH_SPARSEMEM_ENABLE |
| 405 | select SYS_SUPPORTS_SH_CMT |
| 406 | select PINCTRL |
| 407 | help |
| 408 | Select SH7724 if you have an SH-MobileR2R CPU. |
| 409 | |
| 410 | config CPU_SUBTYPE_SH7734 |
| 411 | bool "Support SH7734 processor" |
| 412 | select CPU_SH4A |
| 413 | select CPU_SHX2 |
| 414 | select PINCTRL |
| 415 | help |
| 416 | Select SH7734 if you have a SH4A SH7734 CPU. |
| 417 | |
| 418 | config CPU_SUBTYPE_SH7757 |
| 419 | bool "Support SH7757 processor" |
| 420 | select CPU_SH4A |
| 421 | select CPU_SHX2 |
| 422 | select PINCTRL |
| 423 | help |
| 424 | Select SH7757 if you have a SH4A SH7757 CPU. |
| 425 | |
| 426 | config CPU_SUBTYPE_SH7763 |
| 427 | bool "Support SH7763 processor" |
| 428 | select CPU_SH4A |
| 429 | select USB_OHCI_SH if USB_OHCI_HCD |
| 430 | help |
| 431 | Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. |
| 432 | |
| 433 | config CPU_SUBTYPE_SH7770 |
| 434 | bool "Support SH7770 processor" |
| 435 | select CPU_SH4A |
| 436 | |
| 437 | config CPU_SUBTYPE_SH7780 |
| 438 | bool "Support SH7780 processor" |
| 439 | select CPU_SH4A |
| 440 | |
| 441 | config CPU_SUBTYPE_SH7785 |
| 442 | bool "Support SH7785 processor" |
| 443 | select CPU_SH4A |
| 444 | select CPU_SHX2 |
| 445 | select ARCH_SPARSEMEM_ENABLE |
| 446 | select SYS_SUPPORTS_NUMA |
| 447 | select PINCTRL |
| 448 | |
| 449 | config CPU_SUBTYPE_SH7786 |
| 450 | bool "Support SH7786 processor" |
| 451 | select CPU_SH4A |
| 452 | select CPU_SHX3 |
| 453 | select CPU_HAS_PTEAEX |
| 454 | select GENERIC_CLOCKEVENTS_BROADCAST if SMP |
| 455 | select USB_OHCI_SH if USB_OHCI_HCD |
| 456 | select USB_EHCI_SH if USB_EHCI_HCD |
| 457 | select PINCTRL |
| 458 | |
| 459 | config CPU_SUBTYPE_SHX3 |
| 460 | bool "Support SH-X3 processor" |
| 461 | select CPU_SH4A |
| 462 | select CPU_SHX3 |
| 463 | select GENERIC_CLOCKEVENTS_BROADCAST if SMP |
| 464 | select GPIOLIB |
| 465 | select GPIOLIB_LEGACY |
| 466 | select PINCTRL |
| 467 | |
| 468 | # SH4AL-DSP Processor Support |
| 469 | |
| 470 | config CPU_SUBTYPE_SH7343 |
| 471 | bool "Support SH7343 processor" |
| 472 | select CPU_SH4AL_DSP |
| 473 | select ARCH_SHMOBILE |
| 474 | select SYS_SUPPORTS_SH_CMT |
| 475 | |
| 476 | config CPU_SUBTYPE_SH7722 |
| 477 | bool "Support SH7722 processor" |
| 478 | select CPU_SH4AL_DSP |
| 479 | select CPU_SHX2 |
| 480 | select ARCH_SHMOBILE |
| 481 | select ARCH_SPARSEMEM_ENABLE |
| 482 | select SYS_SUPPORTS_NUMA |
| 483 | select SYS_SUPPORTS_SH_CMT |
| 484 | select PINCTRL |
| 485 | |
| 486 | config CPU_SUBTYPE_SH7366 |
| 487 | bool "Support SH7366 processor" |
| 488 | select CPU_SH4AL_DSP |
| 489 | select CPU_SHX2 |
| 490 | select ARCH_SHMOBILE |
| 491 | select ARCH_SPARSEMEM_ENABLE |
| 492 | select SYS_SUPPORTS_NUMA |
| 493 | select SYS_SUPPORTS_SH_CMT |
| 494 | |
| 495 | endchoice |
| 496 | |
| 497 | source "arch/sh/mm/Kconfig" |
| 498 | |
| 499 | source "arch/sh/Kconfig.cpu" |
| 500 | |
| 501 | source "arch/sh/boards/Kconfig" |
| 502 | |
| 503 | menu "Timer and clock configuration" |
| 504 | |
| 505 | config SH_PCLK_FREQ |
| 506 | int "Peripheral clock frequency (in Hz)" |
| 507 | depends on SH_CLK_CPG_LEGACY |
| 508 | default "31250000" if CPU_SUBTYPE_SH7619 |
| 509 | default "33333333" if CPU_SUBTYPE_SH7770 || \ |
| 510 | CPU_SUBTYPE_SH7760 || \ |
| 511 | CPU_SUBTYPE_SH7705 || \ |
| 512 | CPU_SUBTYPE_SH7203 || \ |
| 513 | CPU_SUBTYPE_SH7206 || \ |
| 514 | CPU_SUBTYPE_SH7263 || \ |
| 515 | CPU_SUBTYPE_MXG |
| 516 | default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R |
| 517 | default "50000000" |
| 518 | help |
| 519 | This option is used to specify the peripheral clock frequency. |
| 520 | This is necessary for determining the reference clock value on |
| 521 | platforms lacking an RTC. |
| 522 | |
| 523 | config SH_CLK_CPG |
| 524 | def_bool y |
| 525 | |
| 526 | config SH_CLK_CPG_LEGACY |
| 527 | depends on SH_CLK_CPG |
| 528 | def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \ |
| 529 | !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \ |
| 530 | !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \ |
| 531 | !CPU_SUBTYPE_SH7269 |
| 532 | |
| 533 | endmenu |
| 534 | |
| 535 | menu "CPU Frequency scaling" |
| 536 | source "drivers/cpufreq/Kconfig" |
| 537 | endmenu |
| 538 | |
| 539 | source "arch/sh/drivers/Kconfig" |
| 540 | |
| 541 | endmenu |
| 542 | |
| 543 | menu "Kernel features" |
| 544 | |
| 545 | source "kernel/Kconfig.hz" |
| 546 | |
| 547 | config ARCH_SUPPORTS_KEXEC |
| 548 | def_bool MMU |
| 549 | |
| 550 | config ARCH_SUPPORTS_CRASH_DUMP |
| 551 | def_bool BROKEN_ON_SMP |
| 552 | |
| 553 | config ARCH_DEFAULT_CRASH_DUMP |
| 554 | def_bool y |
| 555 | |
| 556 | config ARCH_SUPPORTS_KEXEC_JUMP |
| 557 | def_bool y |
| 558 | |
| 559 | config PHYSICAL_START |
| 560 | hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP) |
| 561 | default MEMORY_START |
| 562 | help |
| 563 | This gives the physical address where the kernel is loaded |
| 564 | and is ordinarily the same as MEMORY_START. |
| 565 | |
| 566 | Different values are primarily used in the case of kexec on panic |
| 567 | where the fail safe kernel needs to run at a different address |
| 568 | than the panic-ed kernel. |
| 569 | |
| 570 | config SMP |
| 571 | bool "Symmetric multi-processing support" |
| 572 | depends on SYS_SUPPORTS_SMP |
| 573 | help |
| 574 | This enables support for systems with more than one CPU. If you have |
| 575 | a system with only one CPU, say N. If you have a system with more |
| 576 | than one CPU, say Y. |
| 577 | |
| 578 | If you say N here, the kernel will run on uni- and multiprocessor |
| 579 | machines, but will use only one CPU of a multiprocessor machine. If |
| 580 | you say Y here, the kernel will run on many, but not all, |
| 581 | uniprocessor machines. On a uniprocessor machine, the kernel |
| 582 | will run faster if you say N here. |
| 583 | |
| 584 | People using multiprocessor machines who say Y here should also say |
| 585 | Y to "Enhanced Real Time Clock Support", below. |
| 586 | |
| 587 | See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO |
| 588 | available at <https://www.tldp.org/docs.html#howto>. |
| 589 | |
| 590 | If you don't know what to do here, say N. |
| 591 | |
| 592 | config NR_CPUS |
| 593 | int "Maximum number of CPUs (2-32)" |
| 594 | range 2 32 |
| 595 | depends on SMP |
| 596 | default "4" if CPU_SUBTYPE_SHX3 |
| 597 | default "2" |
| 598 | help |
| 599 | This allows you to specify the maximum number of CPUs which this |
| 600 | kernel will support. The maximum supported value is 32 and the |
| 601 | minimum value which makes sense is 2. |
| 602 | |
| 603 | This is purely to save memory - each supported CPU adds |
| 604 | approximately eight kilobytes to the kernel image. |
| 605 | |
| 606 | config HOTPLUG_CPU |
| 607 | bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" |
| 608 | depends on SMP |
| 609 | help |
| 610 | Say Y here to experiment with turning CPUs off and on. CPUs |
| 611 | can be controlled through /sys/devices/system/cpu. |
| 612 | |
| 613 | config GUSA |
| 614 | def_bool y |
| 615 | depends on !SMP |
| 616 | help |
| 617 | This enables support for gUSA (general UserSpace Atomicity). |
| 618 | This is the default implementation for both UP and non-ll/sc |
| 619 | CPUs, and is used by the libc, amongst others. |
| 620 | |
| 621 | For additional information, design information can be found |
| 622 | in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>. |
| 623 | |
| 624 | This should only be disabled for special cases where alternate |
| 625 | atomicity implementations exist. |
| 626 | |
| 627 | config GUSA_RB |
| 628 | bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)" |
| 629 | depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A) |
| 630 | help |
| 631 | Enabling this option will allow the kernel to implement some |
| 632 | atomic operations using a software implementation of load-locked/ |
| 633 | store-conditional (LLSC). On machines which do not have hardware |
| 634 | LLSC, this should be more efficient than the other alternative of |
| 635 | disabling interrupts around the atomic sequence. |
| 636 | |
| 637 | config HW_PERF_EVENTS |
| 638 | bool "Enable hardware performance counter support for perf events" |
| 639 | depends on PERF_EVENTS && CPU_HAS_PMU |
| 640 | default y |
| 641 | help |
| 642 | Enable hardware performance counter support for perf events. If |
| 643 | disabled, perf events will use software events only. |
| 644 | |
| 645 | source "drivers/sh/Kconfig" |
| 646 | |
| 647 | endmenu |
| 648 | |
| 649 | menu "Boot options" |
| 650 | |
| 651 | config BUILTIN_DTB |
| 652 | bool "Use builtin DTB" |
| 653 | default n |
| 654 | depends on SH_DEVICE_TREE |
| 655 | select GENERIC_BUILTIN_DTB |
| 656 | help |
| 657 | Link a device tree blob for particular hardware into the kernel, |
| 658 | suppressing use of the DTB pointer provided by the bootloader. |
| 659 | This option should only be used with legacy bootloaders that are |
| 660 | not capable of providing a DTB to the kernel, or for experimental |
| 661 | hardware without stable device tree bindings. |
| 662 | |
| 663 | config BUILTIN_DTB_NAME |
| 664 | string "Source file for builtin DTB" |
| 665 | default "" |
| 666 | depends on BUILTIN_DTB |
| 667 | help |
| 668 | Base name (without suffix, relative to arch/sh/boot/dts) for the |
| 669 | a DTS file that will be used to produce the DTB linked into the |
| 670 | kernel. |
| 671 | |
| 672 | config ZERO_PAGE_OFFSET |
| 673 | hex |
| 674 | default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \ |
| 675 | SH_7751_SOLUTION_ENGINE |
| 676 | default "0x00004000" if PAGE_SIZE_16KB || SH_SH03 |
| 677 | default "0x00002000" if PAGE_SIZE_8KB |
| 678 | default "0x00001000" |
| 679 | help |
| 680 | This sets the default offset of zero page. |
| 681 | |
| 682 | config BOOT_LINK_OFFSET |
| 683 | hex |
| 684 | default "0x00210000" if SH_SHMIN |
| 685 | default "0x00810000" if SH_7780_SOLUTION_ENGINE |
| 686 | default "0x009e0000" if SH_TITAN |
| 687 | default "0x01800000" if SH_SDK7780 |
| 688 | default "0x02000000" if SH_EDOSK7760 |
| 689 | default "0x00800000" |
| 690 | help |
| 691 | This option allows you to set the link address offset of the zImage. |
| 692 | This can be useful if you are on a board which has a small amount of |
| 693 | memory. |
| 694 | |
| 695 | config ENTRY_OFFSET |
| 696 | hex |
| 697 | default "0x00001000" if PAGE_SIZE_4KB |
| 698 | default "0x00002000" if PAGE_SIZE_8KB |
| 699 | default "0x00004000" if PAGE_SIZE_16KB |
| 700 | default "0x00010000" if PAGE_SIZE_64KB |
| 701 | default "0x00000000" |
| 702 | |
| 703 | config ROMIMAGE_MMCIF |
| 704 | bool "Include MMCIF loader in romImage (EXPERIMENTAL)" |
| 705 | depends on CPU_SUBTYPE_SH7724 |
| 706 | help |
| 707 | Say Y here to include experimental MMCIF loading code in |
| 708 | romImage. With this enabled it is possible to write the romImage |
| 709 | kernel image to an MMC card and boot the kernel straight from |
| 710 | the reset vector. At reset the processor Mask ROM will load the |
| 711 | first part of the romImage which in turn loads the rest the kernel |
| 712 | image to RAM using the MMCIF hardware block. |
| 713 | |
| 714 | choice |
| 715 | prompt "Kernel command line" |
| 716 | default CMDLINE_OVERWRITE |
| 717 | help |
| 718 | Setting this option allows the kernel command line arguments |
| 719 | to be set. |
| 720 | |
| 721 | config CMDLINE_OVERWRITE |
| 722 | bool "Overwrite bootloader kernel arguments" |
| 723 | help |
| 724 | Given string will overwrite any arguments passed in by |
| 725 | a bootloader. |
| 726 | |
| 727 | config CMDLINE_EXTEND |
| 728 | bool "Extend bootloader kernel arguments" |
| 729 | help |
| 730 | Given string will be concatenated with arguments passed in |
| 731 | by a bootloader. |
| 732 | |
| 733 | config CMDLINE_FROM_BOOTLOADER |
| 734 | bool "Use bootloader kernel arguments" |
| 735 | help |
| 736 | Uses the command-line options passed by the boot loader. |
| 737 | |
| 738 | endchoice |
| 739 | |
| 740 | config CMDLINE |
| 741 | string "Kernel command line arguments string" |
| 742 | depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND |
| 743 | default "console=ttySC1,115200" |
| 744 | |
| 745 | endmenu |
| 746 | |
| 747 | menu "Bus options" |
| 748 | |
| 749 | config MAPLE |
| 750 | bool "Maple Bus support" |
| 751 | depends on SH_DREAMCAST |
| 752 | help |
| 753 | The Maple Bus is SEGA's serial communication bus for peripherals |
| 754 | on the Dreamcast. Without this bus support you won't be able to |
| 755 | get your Dreamcast keyboard etc to work, so most users |
| 756 | probably want to say 'Y' here, unless you are only using the |
| 757 | Dreamcast with a serial line terminal or a remote network |
| 758 | connection. |
| 759 | |
| 760 | endmenu |
| 761 | |
| 762 | menu "Power management options (EXPERIMENTAL)" |
| 763 | |
| 764 | source "kernel/power/Kconfig" |
| 765 | |
| 766 | source "drivers/cpuidle/Kconfig" |
| 767 | |
| 768 | endmenu |