| 1 | |
| 2 | |
| 3 | * Copyright (c) 2011 Samsung Electronics Co., Ltd.
|
| 4 | * http://www.samsung.com/
|
| 5 | *
|
| 6 | * samsung - Common hr-timer support (s3c and s5p)
|
| 7 |
|
| 8 |
|
| 9 | #include <linux/interrupt.h>
|
| 10 | #include <linux/irq.h>
|
| 11 | #include <linux/err.h>
|
| 12 | #include <linux/clk.h>
|
| 13 | #include <linux/clockchips.h>
|
| 14 | #include <linux/list.h>
|
| 15 | #include <linux/module.h>
|
| 16 | #include <linux/of.h>
|
| 17 | #include <linux/of_address.h>
|
| 18 | #include <linux/of_irq.h>
|
| 19 | #include <linux/platform_device.h>
|
| 20 | #include <linux/slab.h>
|
| 21 | #include <linux/sched_clock.h>
|
| 22 |
|
| 23 | #include <clocksource/samsung_pwm.h>
|
| 24 |
|
| 25 | |
| 26 | * Clocksource driver
|
| 27 |
|
| 28 |
|
| 29 | #define REG_TCFG0 0x00
|
| 30 | #define REG_TCFG1 0x04
|
| 31 | #define REG_TCON 0x08
|
| 32 | #define REG_TINT_CSTAT 0x44
|
| 33 |
|
| 34 | #define REG_TCNTB(chan) (0x0c + 12 * (chan))
|
| 35 | #define REG_TCMPB(chan) (0x10 + 12 * (chan))
|
| 36 |
|
| 37 | #define TCFG0_PRESCALER_MASK 0xff
|
| 38 | #define TCFG0_PRESCALER1_SHIFT 8
|
| 39 |
|
| 40 | #define TCFG1_SHIFT(x) ((x) * 4)
|
| 41 | #define TCFG1_MUX_MASK 0xf
|
| 42 |
|
| 43 | |
| 44 | * Each channel occupies 4 bits in TCON register, but there is a gap of 4
|
| 45 | * bits (one channel) after channel 0, so channels have different numbering
|
| 46 | * when accessing TCON register.
|
| 47 | *
|
| 48 | * In addition, the location of autoreload bit for channel 4 (TCON channel 5)
|
| 49 | * in its set of bits is 2 as opposed to 3 for other channels.
|
| 50 |
|
| 51 | #define TCON_START(chan) (1 << (4 * (chan) + 0))
|
| 52 | #define TCON_MANUALUPDATE(chan) (1 << (4 * (chan) + 1))
|
| 53 | #define TCON_INVERT(chan) (1 << (4 * (chan) + 2))
|
| 54 | #define _TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3))
|
| 55 | #define _TCON_AUTORELOAD4(chan) (1 << (4 * (chan) + 2))
|
| 56 | #define TCON_AUTORELOAD(chan) \
|
| 57 | ((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan))
|
| 58 |
|
| 59 | DEFINE_RAW_SPINLOCK(samsung_pwm_lock);
|
| 60 | EXPORT_SYMBOL(samsung_pwm_lock);
|
| 61 |
|
| 62 | struct samsung_pwm_clocksource {
|
| 63 | void __iomem *base;
|
| 64 | const void __iomem *source_reg;
|
| 65 | unsigned int irq[SAMSUNG_PWM_NUM];
|
| 66 | struct samsung_pwm_variant variant;
|
| 67 |
|
| 68 | struct clk *timerclk;
|
| 69 |
|
| 70 | unsigned int event_id;
|
| 71 | unsigned int source_id;
|
| 72 | unsigned int tcnt_max;
|
| 73 | unsigned int tscaler_div;
|
| 74 | unsigned int tdiv;
|
| 75 |
|
| 76 | unsigned long clock_count_per_tick;
|
| 77 | };
|
| 78 |
|
| 79 | static struct samsung_pwm_clocksource pwm;
|
| 80 |
|
| 81 | static void samsung_timer_set_prescale(unsigned int channel, u16 prescale)
|
| 82 | {
|
| 83 | unsigned long flags;
|
| 84 | u8 shift = 0;
|
| 85 | u32 reg;
|
| 86 |
|
| 87 | if (channel >= 2)
|
| 88 | shift = TCFG0_PRESCALER1_SHIFT;
|
| 89 |
|
| 90 | raw_spin_lock_irqsave(&samsung_pwm_lock, flags);
|
| 91 |
|
| 92 | reg = readl(pwm.base + REG_TCFG0);
|
| 93 | reg &= ~(TCFG0_PRESCALER_MASK << shift);
|
| 94 | reg |= (prescale - 1) << shift;
|
| 95 | writel(reg, pwm.base + REG_TCFG0);
|
| 96 |
|
| 97 | raw_spin_unlock_irqrestore(&samsung_pwm_lock, flags);
|
| 98 | }
|
| 99 |
|
| 100 | static void samsung_timer_set_divisor(unsigned int channel, u8 divisor)
|
| 101 | {
|
| 102 | u8 shift = TCFG1_SHIFT(channel);
|
| 103 | unsigned long flags;
|
| 104 | u32 reg;
|
| 105 | u8 bits;
|
| 106 |
|
| 107 | bits = (fls(divisor) - 1) - pwm.variant.div_base;
|
| 108 |
|
| 109 | raw_spin_lock_irqsave(&samsung_pwm_lock, flags);
|
| 110 |
|
| 111 | reg = readl(pwm.base + REG_TCFG1);
|
| 112 | reg &= ~(TCFG1_MUX_MASK << shift);
|
| 113 | reg |= bits << shift;
|
| 114 | writel(reg, pwm.base + REG_TCFG1);
|
| 115 |
|
| 116 | raw_spin_unlock_irqrestore(&samsung_pwm_lock, flags);
|
| 117 | }
|
| 118 |
|
| 119 | static void samsung_time_stop(unsigned int channel)
|
| 120 | {
|
| 121 | unsigned long tcon;
|
| 122 | unsigned long flags;
|
| 123 |
|
| 124 | if (channel > 0)
|
| 125 | ++channel;
|
| 126 |
|
| 127 | raw_spin_lock_irqsave(&samsung_pwm_lock, flags);
|
| 128 |
|
| 129 | tcon = readl_relaxed(pwm.base + REG_TCON);
|
| 130 | tcon &= ~TCON_START(channel);
|
| 131 | writel_relaxed(tcon, pwm.base + REG_TCON);
|
| 132 |
|
| 133 | raw_spin_unlock_irqrestore(&samsung_pwm_lock, flags);
|
| 134 | }
|
| 135 |
|
| 136 | static void samsung_time_setup(unsigned int channel, unsigned long tcnt)
|
| 137 | {
|
| 138 | unsigned long tcon;
|
| 139 | unsigned long flags;
|
| 140 | unsigned int tcon_chan = channel;
|
| 141 |
|
| 142 | if (tcon_chan > 0)
|
| 143 | ++tcon_chan;
|
| 144 |
|
| 145 | raw_spin_lock_irqsave(&samsung_pwm_lock, flags);
|
| 146 |
|
| 147 | tcon = readl_relaxed(pwm.base + REG_TCON);
|
| 148 |
|
| 149 | tcon &= ~(TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan));
|
| 150 | tcon |= TCON_MANUALUPDATE(tcon_chan);
|
| 151 |
|
| 152 | writel_relaxed(tcnt, pwm.base + REG_TCNTB(channel));
|
| 153 | writel_relaxed(tcnt, pwm.base + REG_TCMPB(channel));
|
| 154 | writel_relaxed(tcon, pwm.base + REG_TCON);
|
| 155 |
|
| 156 | raw_spin_unlock_irqrestore(&samsung_pwm_lock, flags);
|
| 157 | }
|
| 158 |
|
| 159 | static void samsung_time_start(unsigned int channel, bool periodic)
|
| 160 | {
|
| 161 | unsigned long tcon;
|
| 162 | unsigned long flags;
|
| 163 |
|
| 164 | if (channel > 0)
|
| 165 | ++channel;
|
| 166 |
|
| 167 | raw_spin_lock_irqsave(&samsung_pwm_lock, flags);
|
| 168 |
|
| 169 | tcon = readl_relaxed(pwm.base + REG_TCON);
|
| 170 |
|
| 171 | tcon &= ~TCON_MANUALUPDATE(channel);
|
| 172 | tcon |= TCON_START(channel);
|
| 173 |
|
| 174 | if (periodic)
|
| 175 | tcon |= TCON_AUTORELOAD(channel);
|
| 176 | else
|
| 177 | tcon &= ~TCON_AUTORELOAD(channel);
|
| 178 |
|
| 179 | writel_relaxed(tcon, pwm.base + REG_TCON);
|
| 180 |
|
| 181 | raw_spin_unlock_irqrestore(&samsung_pwm_lock, flags);
|
| 182 | }
|
| 183 |
|
| 184 | static int samsung_set_next_event(unsigned long cycles,
|
| 185 | struct clock_event_device *evt)
|
| 186 | {
|
| 187 | |
| 188 | * This check is needed to account for internal rounding
|
| 189 | * errors inside clockevents core, which might result in
|
| 190 | * passing cycles = 0, which in turn would not generate any
|
| 191 | * timer interrupt and hang the system.
|
| 192 | *
|
| 193 | * Another solution would be to set up the clockevent device
|
| 194 | * with min_delta = 2, but this would unnecessarily increase
|
| 195 | * the minimum sleep period.
|
| 196 |
|
| 197 | if (!cycles)
|
| 198 | cycles = 1;
|
| 199 |
|
| 200 | samsung_time_setup(pwm.event_id, cycles);
|
| 201 | samsung_time_start(pwm.event_id, false);
|
| 202 |
|
| 203 | return 0;
|
| 204 | }
|
| 205 |
|
| 206 | static int samsung_shutdown(struct clock_event_device *evt)
|
| 207 | {
|
| 208 | samsung_time_stop(pwm.event_id);
|
| 209 | return 0;
|
| 210 | }
|
| 211 |
|
| 212 | static int samsung_set_periodic(struct clock_event_device *evt)
|
| 213 | {
|
| 214 | samsung_time_stop(pwm.event_id);
|
| 215 | samsung_time_setup(pwm.event_id, pwm.clock_count_per_tick - 1);
|
| 216 | samsung_time_start(pwm.event_id, true);
|
| 217 | return 0;
|
| 218 | }
|
| 219 |
|
| 220 | static void samsung_clockevent_resume(struct clock_event_device *cev)
|
| 221 | {
|
| 222 | samsung_timer_set_prescale(pwm.event_id, pwm.tscaler_div);
|
| 223 | samsung_timer_set_divisor(pwm.event_id, pwm.tdiv);
|
| 224 |
|
| 225 | if (pwm.variant.has_tint_cstat) {
|
| 226 | u32 mask = (1 << pwm.event_id);
|
| 227 |
|
| 228 | writel(mask | (mask << 5), pwm.base + REG_TINT_CSTAT);
|
| 229 | }
|
| 230 | }
|
| 231 |
|
| 232 | static struct clock_event_device time_event_device = {
|
| 233 | .name = "samsung_event_timer",
|
| 234 | .features = CLOCK_EVT_FEAT_PERIODIC |
|
| 235 | CLOCK_EVT_FEAT_ONESHOT,
|
| 236 | .rating = 200,
|
| 237 | .set_next_event = samsung_set_next_event,
|
| 238 | .set_state_shutdown = samsung_shutdown,
|
| 239 | .set_state_periodic = samsung_set_periodic,
|
| 240 | .set_state_oneshot = samsung_shutdown,
|
| 241 | .tick_resume = samsung_shutdown,
|
| 242 | .resume = samsung_clockevent_resume,
|
| 243 | };
|
| 244 |
|
| 245 | static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
|
| 246 | {
|
| 247 | struct clock_event_device *evt = dev_id;
|
| 248 |
|
| 249 | if (pwm.variant.has_tint_cstat) {
|
| 250 | u32 mask = (1 << pwm.event_id);
|
| 251 |
|
| 252 | writel(mask | (mask << 5), pwm.base + REG_TINT_CSTAT);
|
| 253 | }
|
| 254 |
|
| 255 | evt->event_handler(evt);
|
| 256 |
|
| 257 | return IRQ_HANDLED;
|
| 258 | }
|
| 259 |
|
| 260 | static void __init samsung_clockevent_init(void)
|
| 261 | {
|
| 262 | unsigned long pclk;
|
| 263 | unsigned long clock_rate;
|
| 264 | unsigned int irq_number;
|
| 265 |
|
| 266 | pclk = clk_get_rate(pwm.timerclk);
|
| 267 |
|
| 268 | samsung_timer_set_prescale(pwm.event_id, pwm.tscaler_div);
|
| 269 | samsung_timer_set_divisor(pwm.event_id, pwm.tdiv);
|
| 270 |
|
| 271 | clock_rate = pclk / (pwm.tscaler_div * pwm.tdiv);
|
| 272 | pwm.clock_count_per_tick = clock_rate / HZ;
|
| 273 |
|
| 274 | time_event_device.cpumask = cpumask_of(0);
|
| 275 | clockevents_config_and_register(&time_event_device,
|
| 276 | clock_rate, 1, pwm.tcnt_max);
|
| 277 |
|
| 278 | irq_number = pwm.irq[pwm.event_id];
|
| 279 | if (request_irq(irq_number, samsung_clock_event_isr,
|
| 280 | IRQF_TIMER | IRQF_IRQPOLL, "samsung_time_irq",
|
| 281 | &time_event_device))
|
| 282 | pr_err("%s: request_irq() failed\n", "samsung_time_irq");
|
| 283 |
|
| 284 | if (pwm.variant.has_tint_cstat) {
|
| 285 | u32 mask = (1 << pwm.event_id);
|
| 286 |
|
| 287 | writel(mask | (mask << 5), pwm.base + REG_TINT_CSTAT);
|
| 288 | }
|
| 289 | }
|
| 290 |
|
| 291 | static void samsung_clocksource_suspend(struct clocksource *cs)
|
| 292 | {
|
| 293 | samsung_time_stop(pwm.source_id);
|
| 294 | }
|
| 295 |
|
| 296 | static void samsung_clocksource_resume(struct clocksource *cs)
|
| 297 | {
|
| 298 | samsung_timer_set_prescale(pwm.source_id, pwm.tscaler_div);
|
| 299 | samsung_timer_set_divisor(pwm.source_id, pwm.tdiv);
|
| 300 |
|
| 301 | samsung_time_setup(pwm.source_id, pwm.tcnt_max);
|
| 302 | samsung_time_start(pwm.source_id, true);
|
| 303 | }
|
| 304 |
|
| 305 | static u64 notrace samsung_clocksource_read(struct clocksource *c)
|
| 306 | {
|
| 307 | return ~readl_relaxed(pwm.source_reg);
|
| 308 | }
|
| 309 |
|
| 310 | static struct clocksource samsung_clocksource = {
|
| 311 | .name = "samsung_clocksource_timer",
|
| 312 | .rating = 250,
|
| 313 | .read = samsung_clocksource_read,
|
| 314 | .suspend = samsung_clocksource_suspend,
|
| 315 | .resume = samsung_clocksource_resume,
|
| 316 | .flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
| 317 | };
|
| 318 |
|
| 319 | |
| 320 | * Override the global weak sched_clock symbol with this
|
| 321 | * local implementation which uses the clocksource to get some
|
| 322 | * better resolution when scheduling the kernel. We accept that
|
| 323 | * this wraps around for now, since it is just a relative time
|
| 324 | * stamp. (Inspired by U300 implementation.)
|
| 325 |
|
| 326 | static u64 notrace samsung_read_sched_clock(void)
|
| 327 | {
|
| 328 | return samsung_clocksource_read(NULL);
|
| 329 | }
|
| 330 |
|
| 331 | static int __init samsung_clocksource_init(void)
|
| 332 | {
|
| 333 | unsigned long pclk;
|
| 334 | unsigned long clock_rate;
|
| 335 |
|
| 336 | pclk = clk_get_rate(pwm.timerclk);
|
| 337 |
|
| 338 | samsung_timer_set_prescale(pwm.source_id, pwm.tscaler_div);
|
| 339 | samsung_timer_set_divisor(pwm.source_id, pwm.tdiv);
|
| 340 |
|
| 341 | clock_rate = pclk / (pwm.tscaler_div * pwm.tdiv);
|
| 342 |
|
| 343 | samsung_time_setup(pwm.source_id, pwm.tcnt_max);
|
| 344 | samsung_time_start(pwm.source_id, true);
|
| 345 |
|
| 346 | if (pwm.source_id == 4)
|
| 347 | pwm.source_reg = pwm.base + 0x40;
|
| 348 | else
|
| 349 | pwm.source_reg = pwm.base + pwm.source_id * 0x0c + 0x14;
|
| 350 |
|
| 351 | sched_clock_register(samsung_read_sched_clock,
|
| 352 | pwm.variant.bits, clock_rate);
|
| 353 |
|
| 354 | samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits);
|
| 355 | return clocksource_register_hz(&samsung_clocksource, clock_rate);
|
| 356 | }
|
| 357 |
|
| 358 | static void __init samsung_timer_resources(void)
|
| 359 | {
|
| 360 | clk_prepare_enable(pwm.timerclk);
|
| 361 |
|
| 362 | pwm.tcnt_max = (1UL << pwm.variant.bits) - 1;
|
| 363 | if (pwm.variant.bits == 16) {
|
| 364 | pwm.tscaler_div = 25;
|
| 365 | pwm.tdiv = 2;
|
| 366 | } else {
|
| 367 | pwm.tscaler_div = 2;
|
| 368 | pwm.tdiv = 1;
|
| 369 | }
|
| 370 | }
|
| 371 |
|
| 372 | |
| 373 | * PWM master driver
|
| 374 |
|
| 375 | static int __init _samsung_pwm_clocksource_init(void)
|
| 376 | {
|
| 377 | u8 mask;
|
| 378 | int channel;
|
| 379 |
|
| 380 | mask = ~pwm.variant.output_mask & ((1 << SAMSUNG_PWM_NUM) - 1);
|
| 381 | channel = fls(mask) - 1;
|
| 382 | if (channel < 0) {
|
| 383 | pr_crit("failed to find PWM channel for clocksource\n");
|
| 384 | return -EINVAL;
|
| 385 | }
|
| 386 | pwm.source_id = channel;
|
| 387 |
|
| 388 | mask &= ~(1 << channel);
|
| 389 | channel = fls(mask) - 1;
|
| 390 | if (channel < 0) {
|
| 391 | pr_crit("failed to find PWM channel for clock event\n");
|
| 392 | return -EINVAL;
|
| 393 | }
|
| 394 | pwm.event_id = channel;
|
| 395 |
|
| 396 | samsung_timer_resources();
|
| 397 | samsung_clockevent_init();
|
| 398 |
|
| 399 | return samsung_clocksource_init();
|
| 400 | }
|
| 401 |
|
| 402 | void __init samsung_pwm_clocksource_init(void __iomem *base,
|
| 403 | unsigned int *irqs,
|
| 404 | const struct samsung_pwm_variant *variant)
|
| 405 | {
|
| 406 | pwm.base = base;
|
| 407 | memcpy(&pwm.variant, variant, sizeof(pwm.variant));
|
| 408 | memcpy(pwm.irq, irqs, SAMSUNG_PWM_NUM * sizeof(*irqs));
|
| 409 |
|
| 410 | pwm.timerclk = clk_get(NULL, "timers");
|
| 411 | if (IS_ERR(pwm.timerclk))
|
| 412 | panic("failed to get timers clock for timer");
|
| 413 |
|
| 414 | _samsung_pwm_clocksource_init();
|
| 415 | }
|
| 416 |
|
| 417 | #ifdef CONFIG_TIMER_OF
|
| 418 | static int __init samsung_pwm_alloc(struct device_node *np,
|
| 419 | const struct samsung_pwm_variant *variant)
|
| 420 | {
|
| 421 | u32 val;
|
| 422 | int i, ret;
|
| 423 |
|
| 424 | memcpy(&pwm.variant, variant, sizeof(pwm.variant));
|
| 425 | for (i = 0; i < SAMSUNG_PWM_NUM; ++i)
|
| 426 | pwm.irq[i] = irq_of_parse_and_map(np, i);
|
| 427 |
|
| 428 | of_property_for_each_u32(np, "samsung,pwm-outputs", val) {
|
| 429 | if (val >= SAMSUNG_PWM_NUM) {
|
| 430 | pr_warn("%s: invalid channel index in samsung,pwm-outputs property\n", __func__);
|
| 431 | continue;
|
| 432 | }
|
| 433 | pwm.variant.output_mask |= 1 << val;
|
| 434 | }
|
| 435 |
|
| 436 | pwm.base = of_iomap(np, 0);
|
| 437 | if (!pwm.base) {
|
| 438 | pr_err("%s: failed to map PWM registers\n", __func__);
|
| 439 | return -ENXIO;
|
| 440 | }
|
| 441 |
|
| 442 | pwm.timerclk = of_clk_get_by_name(np, "timers");
|
| 443 | if (IS_ERR(pwm.timerclk)) {
|
| 444 | pr_crit("failed to get timers clock for timer\n");
|
| 445 | ret = PTR_ERR(pwm.timerclk);
|
| 446 | goto err_clk;
|
| 447 | }
|
| 448 |
|
| 449 | ret = _samsung_pwm_clocksource_init();
|
| 450 | if (ret)
|
| 451 | goto err_clocksource;
|
| 452 |
|
| 453 | return 0;
|
| 454 |
|
| 455 | err_clocksource:
|
| 456 | clk_put(pwm.timerclk);
|
| 457 | pwm.timerclk = NULL;
|
| 458 | err_clk:
|
| 459 | iounmap(pwm.base);
|
| 460 | pwm.base = NULL;
|
| 461 |
|
| 462 | return ret;
|
| 463 | }
|
| 464 |
|
| 465 | static const struct samsung_pwm_variant s3c24xx_variant = {
|
| 466 | .bits = 16,
|
| 467 | .div_base = 1,
|
| 468 | .has_tint_cstat = false,
|
| 469 | .tclk_mask = (1 << 4),
|
| 470 | };
|
| 471 |
|
| 472 | static int __init s3c2410_pwm_clocksource_init(struct device_node *np)
|
| 473 | {
|
| 474 | return samsung_pwm_alloc(np, &s3c24xx_variant);
|
| 475 | }
|
| 476 | TIMER_OF_DECLARE(s3c2410_pwm, "samsung,s3c2410-pwm", s3c2410_pwm_clocksource_init);
|
| 477 |
|
| 478 | static const struct samsung_pwm_variant s3c64xx_variant = {
|
| 479 | .bits = 32,
|
| 480 | .div_base = 0,
|
| 481 | .has_tint_cstat = true,
|
| 482 | .tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
|
| 483 | };
|
| 484 |
|
| 485 | static int __init s3c64xx_pwm_clocksource_init(struct device_node *np)
|
| 486 | {
|
| 487 | return samsung_pwm_alloc(np, &s3c64xx_variant);
|
| 488 | }
|
| 489 | TIMER_OF_DECLARE(s3c6400_pwm, "samsung,s3c6400-pwm", s3c64xx_pwm_clocksource_init);
|
| 490 |
|
| 491 | static const struct samsung_pwm_variant s5p64x0_variant = {
|
| 492 | .bits = 32,
|
| 493 | .div_base = 0,
|
| 494 | .has_tint_cstat = true,
|
| 495 | .tclk_mask = 0,
|
| 496 | };
|
| 497 |
|
| 498 | static int __init s5p64x0_pwm_clocksource_init(struct device_node *np)
|
| 499 | {
|
| 500 | return samsung_pwm_alloc(np, &s5p64x0_variant);
|
| 501 | }
|
| 502 | TIMER_OF_DECLARE(s5p6440_pwm, "samsung,s5p6440-pwm", s5p64x0_pwm_clocksource_init);
|
| 503 |
|
| 504 | static const struct samsung_pwm_variant s5p_variant = {
|
| 505 | .bits = 32,
|
| 506 | .div_base = 0,
|
| 507 | .has_tint_cstat = true,
|
| 508 | .tclk_mask = (1 << 5),
|
| 509 | };
|
| 510 |
|
| 511 | static int __init s5p_pwm_clocksource_init(struct device_node *np)
|
| 512 | {
|
| 513 | return samsung_pwm_alloc(np, &s5p_variant);
|
| 514 | }
|
| 515 | TIMER_OF_DECLARE(s5pc100_pwm, "samsung,s5pc100-pwm", s5p_pwm_clocksource_init);
|
| 516 | #endif
|