projects/linux·blob master · refs

1405 lines · 41.9 KiB

1# SPDX-License-Identifier: GPL-2.0
2menuconfig COMEDI
3 tristate "Data acquisition support (comedi)"
4 help
5 Enable support for a wide range of data acquisition devices
6 for Linux.
7
8if COMEDI
9
10config COMEDI_DEBUG
11 bool "Comedi debugging"
12 help
13 This is an option for use by developers; most people should
14 say N here. This enables comedi core and driver debugging.
15
16config COMEDI_DEFAULT_BUF_SIZE_KB
17 int "Comedi default initial asynchronous buffer size in KiB"
18 default "2048"
19 help
20 This is the default asynchronous buffer size which is used for
21 commands running in the background in kernel space. This
22 defaults to 2048 KiB of memory so that a 16 channel card
23 running at 10 kHz has of 2-4 seconds of buffer.
24
25config COMEDI_DEFAULT_BUF_MAXSIZE_KB
26 int "Comedi default maximum asynchronous buffer size in KiB"
27 default "20480"
28 help
29 This is the default maximum asynchronous buffer size which can
30 be requested by a userspace program without root privileges.
31 This is set to 20480 KiB so that a fast I/O card with 16
32 channels running at 100 kHz has 2-4 seconds of buffer.
33
34menuconfig COMEDI_MISC_DRIVERS
35 bool "Comedi misc drivers"
36 help
37 Enable comedi misc drivers to be built
38
39 Note that the answer to this question won't directly affect the
40 kernel: saying N will just cause the configurator to skip all
41 the questions about misc non-hardware comedi drivers.
42
43if COMEDI_MISC_DRIVERS
44
45config COMEDI_BOND
46 tristate "Comedi device bonding support"
47 select COMEDI_KCOMEDILIB
48 help
49 Enable support for a driver to 'bond' (merge) multiple subdevices
50 from multiple devices together as one.
51
52 Currently, it only handles digital I/O subdevices.
53
54 To compile this driver as a module, choose M here: the module will be
55 called comedi_bond.
56
57config COMEDI_TEST
58 tristate "Fake waveform generator support"
59 help
60 Enable support for the fake waveform generator.
61 This driver is mainly for testing purposes, but can also be used to
62 generate sample waveforms on systems that don't have data acquisition
63 hardware.
64
65 To compile this driver as a module, choose M here: the module will be
66 called comedi_test.
67
68config COMEDI_PARPORT
69 tristate "Parallel port support"
70 depends on HAS_IOPORT
71 help
72 Enable support for the standard parallel port.
73 A cheap and easy way to get a few more digital I/O lines. Steal
74 additional parallel ports from old computers or your neighbors'
75 computers.
76
77 To compile this driver as a module, choose M here: the module will be
78 called comedi_parport.
79
80config COMEDI_SSV_DNP
81 tristate "SSV Embedded Systems DIL/Net-PC support"
82 depends on X86_32 || COMPILE_TEST
83 depends on HAS_IOPORT
84 help
85 Enable support for SSV Embedded Systems DIL/Net-PC
86
87 To compile this driver as a module, choose M here: the module will be
88 called ssv_dnp.
89
90endif # COMEDI_MISC_DRIVERS
91
92menuconfig COMEDI_ISA_DRIVERS
93 bool "Comedi ISA and PC/104 drivers"
94 depends on ISA || ISA_BUS || PC104
95 depends on HAS_IOPORT
96 help
97 Enable comedi ISA and PC/104 drivers to be built
98
99 Note that the answer to this question won't directly affect the
100 kernel: saying N will just cause the configurator to skip all
101 the questions about ISA and PC/104 comedi drivers.
102
103if COMEDI_ISA_DRIVERS
104
105config COMEDI_PCL711
106 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
107 select COMEDI_8254
108 help
109 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
110
111 To compile this driver as a module, choose M here: the module will be
112 called pcl711.
113
114config COMEDI_PCL724
115 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
116 select COMEDI_8255
117 help
118 Enable support for ISA and PC/104 based 8255 digital i/o boards. This
119 driver provides a legacy comedi driver wrapper for the generic 8255
120 support driver.
121
122 Supported boards include:
123 Advantech PCL-724 24 channels
124 Advantech PCL-722 144 (or 96) channels
125 Advantech PCL-731 48 channels
126 ADlink ACL-7122 144 (or 96) channels
127 ADlink ACL-7124 24 channels
128 ADlink PET-48DIO 48 channels
129 WinSystems PCM-IO48 48 channels (PC/104)
130 Diamond Systems ONYX-MM-DIO 48 channels (PC/104)
131
132 To compile this driver as a module, choose M here: the module will be
133 called pcl724.
134
135config COMEDI_PCL726
136 tristate "Advantech PCL-726 and compatible ISA card support"
137 help
138 Enable support for Advantech PCL-726 and compatible ISA cards.
139
140 To compile this driver as a module, choose M here: the module will be
141 called pcl726.
142
143config COMEDI_PCL730
144 tristate "Simple Digital I/O board support (8-bit ports)"
145 help
146 Enable support for various simple ISA or PC/104 Digital I/O boards.
147 These boards all use 8-bit I/O ports.
148
149 Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out
150 ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out
151 ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out
152 Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out
153 Advantech PCL-725 iso - 8 in/8 out
154 ICP P8R8-DIO iso - 8 in/8 out
155 ADlink ACL-7225b iso - 16 in/16 out
156 ICP P16R16-DIO iso - 16 in/16 out
157 Advantech PCL-733 iso - 32 in
158 Advantech PCL-734 iso - 32 out
159 Diamond Systems OPMM-1616-XT iso - 16 in/16 out
160 Diamond Systems PEARL-MM-P iso - 16 out
161 Diamond Systems IR104-PBF iso - 20 in/20 out
162
163 To compile this driver as a module, choose M here: the module will be
164 called pcl730.
165
166config COMEDI_PCL812
167 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
168 select COMEDI_ISADMA if ISA_DMA_API
169 select COMEDI_8254
170 help
171 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
172 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
173 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
174
175 To compile this driver as a module, choose M here: the module will be
176 called pcl812.
177
178config COMEDI_PCL816
179 tristate "Advantech PCL-814 and PCL-816 ISA card support"
180 select COMEDI_ISADMA if ISA_DMA_API
181 select COMEDI_8254
182 help
183 Enable support for Advantech PCL-814 and PCL-816 ISA cards
184
185 To compile this driver as a module, choose M here: the module will be
186 called pcl816.
187
188config COMEDI_PCL818
189 tristate "Advantech PCL-718 and PCL-818 ISA card support"
190 select COMEDI_ISADMA if ISA_DMA_API
191 select COMEDI_8254
192 help
193 Enable support for Advantech PCL-818 ISA cards
194 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
195
196 To compile this driver as a module, choose M here: the module will be
197 called pcl818.
198
199config COMEDI_PCM3724
200 tristate "Advantech PCM-3724 PC/104 card support"
201 select COMEDI_8255
202 help
203 Enable support for Advantech PCM-3724 PC/104 cards.
204
205 To compile this driver as a module, choose M here: the module will be
206 called pcm3724.
207
208config COMEDI_AMPLC_DIO200_ISA
209 tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
210 select COMEDI_AMPLC_DIO200
211 help
212 Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
213 PC272E ISA DIO boards
214
215 To compile this driver as a module, choose M here: the module will be
216 called amplc_dio200.
217
218config COMEDI_AMPLC_PC236_ISA
219 tristate "Amplicon PC36AT DIO board support"
220 select COMEDI_AMPLC_PC236
221 help
222 Enable support for Amplicon PC36AT ISA DIO board.
223
224 To compile this driver as a module, choose M here: the module will be
225 called amplc_pc236.
226
227config COMEDI_AMPLC_PC263_ISA
228 tristate "Amplicon PC263 relay board support"
229 help
230 Enable support for Amplicon PC263 ISA relay board. This board has
231 16 reed relay output channels.
232
233 To compile this driver as a module, choose M here: the module will be
234 called amplc_pc263.
235
236config COMEDI_RTI800
237 tristate "Analog Devices RTI-800/815 ISA card support"
238 help
239 Enable support for Analog Devices RTI-800/815 ISA cards
240
241 To compile this driver as a module, choose M here: the module will be
242 called rti800.
243
244config COMEDI_RTI802
245 tristate "Analog Devices RTI-802 ISA card support"
246 help
247 Enable support for Analog Devices RTI-802 ISA cards
248
249 To compile this driver as a module, choose M here: the module will be
250 called rti802.
251
252config COMEDI_DAC02
253 tristate "Keithley Metrabyte DAC02 compatible ISA card support"
254 help
255 Enable support for Keithley Metrabyte DAC02 compatible ISA cards.
256
257 To compile this driver as a module, choose M here: the module will be
258 called dac02.
259
260config COMEDI_DAS16M1
261 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
262 select COMEDI_8254
263 select COMEDI_8255
264 help
265 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
266
267 To compile this driver as a module, choose M here: the module will be
268 called das16m1.
269
270config COMEDI_DAS08_ISA
271 tristate "DAS-08 compatible ISA and PC/104 card support"
272 select COMEDI_DAS08
273 help
274 Enable support for Keithley Metrabyte/ComputerBoards DAS08
275 and compatible ISA and PC/104 cards:
276 Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
277 DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
278 DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
279
280 To compile this driver as a module, choose M here: the module will be
281 called das08_isa.
282
283config COMEDI_DAS16
284 tristate "DAS-16 compatible ISA and PC/104 card support"
285 select COMEDI_ISADMA if ISA_DMA_API
286 select COMEDI_8254
287 select COMEDI_8255
288 help
289 Enable support for Keithley Metrabyte/ComputerBoards DAS16
290 and compatible ISA and PC/104 cards:
291 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
292 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
293 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
294 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
295 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
296 CIO-DAS1602/16, CIO-DAS16/330
297
298 To compile this driver as a module, choose M here: the module will be
299 called das16.
300
301config COMEDI_DAS800
302 tristate "DAS800 and compatible ISA card support"
303 select COMEDI_8254
304 help
305 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
306 Keithley Metrabyte DAS-800, DAS-801, DAS-802
307 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
308 CIO-DAS802/16
309
310 To compile this driver as a module, choose M here: the module will be
311 called das800.
312
313config COMEDI_DAS1800
314 tristate "DAS1800 and compatible ISA card support"
315 select COMEDI_ISADMA if ISA_DMA_API
316 select COMEDI_8254
317 help
318 Enable support for DAS1800 and compatible ISA cards
319 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
320 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
321 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
322 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
323 DAS-1802AO
324
325 To compile this driver as a module, choose M here: the module will be
326 called das1800.
327
328config COMEDI_DAS6402
329 tristate "DAS6402 and compatible ISA card support"
330 select COMEDI_8254
331 help
332 Enable support for DAS6402 and compatible ISA cards
333 Computerboards, Keithley Metrabyte DAS6402 and compatibles
334
335 To compile this driver as a module, choose M here: the module will be
336 called das6402.
337
338config COMEDI_DT2801
339 tristate "Data Translation DT2801 ISA card support"
340 help
341 Enable support for Data Translation DT2801 ISA cards
342
343 To compile this driver as a module, choose M here: the module will be
344 called dt2801.
345
346config COMEDI_DT2811
347 tristate "Data Translation DT2811 ISA card support"
348 help
349 Enable support for Data Translation DT2811 ISA cards
350
351 To compile this driver as a module, choose M here: the module will be
352 called dt2811.
353
354config COMEDI_DT2814
355 tristate "Data Translation DT2814 ISA card support"
356 help
357 Enable support for Data Translation DT2814 ISA cards
358
359 To compile this driver as a module, choose M here: the module will be
360 called dt2814.
361
362config COMEDI_DT2815
363 tristate "Data Translation DT2815 ISA card support"
364 help
365 Enable support for Data Translation DT2815 ISA cards
366
367 To compile this driver as a module, choose M here: the module will be
368 called dt2815.
369
370config COMEDI_DT2817
371 tristate "Data Translation DT2817 ISA card support"
372 help
373 Enable support for Data Translation DT2817 ISA cards
374
375 To compile this driver as a module, choose M here: the module will be
376 called dt2817.
377
378config COMEDI_DT282X
379 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
380 select COMEDI_ISADMA if ISA_DMA_API
381 help
382 Enable support for Data Translation DT2821 series including DT-EZ
383 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
384 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
385 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
386
387 To compile this driver as a module, choose M here: the module will be
388 called dt282x.
389
390config COMEDI_DMM32AT
391 tristate "Diamond Systems MM-32-AT PC/104 board support"
392 select COMEDI_8255
393 help
394 Enable support for Diamond Systems MM-32-AT PC/104 boards
395
396 To compile this driver as a module, choose M here: the module will be
397 called dmm32at.
398
399config COMEDI_FL512
400 tristate "FL512 ISA card support"
401 help
402 Enable support for FL512 ISA card
403
404 To compile this driver as a module, choose M here: the module will be
405 called fl512.
406
407config COMEDI_AIO_AIO12_8
408 tristate "ACCES I/O Products PC/104 AIO12-8 Analog I/O Board support"
409 select COMEDI_8254
410 select COMEDI_8255
411 help
412 Enable support for ACCES I/O Products PC/104 AIO12-8 Analog I/O Board
413
414 To compile this driver as a module, choose M here: the module will be
415 called aio_aio12_8.
416
417config COMEDI_AIO_IIRO_16
418 tristate "ACCES I/O Products PC/104 IIRO16 Board support"
419 help
420 Enable support for ACCES I/O Products PC/104 IIRO16 Relay And
421 Isolated Input Board
422
423 To compile this driver as a module, choose M here: the module will be
424 called aio_iiro_16.
425
426config COMEDI_II_PCI20KC
427 tristate "Intelligent Instruments PCI-20001C carrier support"
428 depends on HAS_IOMEM
429 help
430 Enable support for Intelligent Instruments PCI-20001C carrier
431 PCI-20001, PCI-20006 and PCI-20341
432
433 To compile this driver as a module, choose M here: the module will be
434 called ii_pci20kc.
435
436config COMEDI_C6XDIGIO
437 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
438 help
439 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
440 card
441
442 To compile this driver as a module, choose M here: the module will be
443 called c6xdigio.
444
445config COMEDI_MPC624
446 tristate "Micro/sys MPC-624 PC/104 board support"
447 help
448 Enable support for Micro/sys MPC-624 PC/104 board
449
450 To compile this driver as a module, choose M here: the module will be
451 called mpc624.
452
453config COMEDI_ADQ12B
454 tristate "MicroAxial ADQ12-B data acquisition and control card support"
455 help
456 Enable MicroAxial ADQ12-B daq and control card support.
457
458 To compile this driver as a module, choose M here: the module will be
459 called adq12b.
460
461config COMEDI_NI_AT_A2150
462 tristate "NI AT-A2150 ISA card support"
463 select COMEDI_ISADMA if ISA_DMA_API
464 select COMEDI_8254
465 help
466 Enable support for National Instruments AT-A2150 cards
467
468 To compile this driver as a module, choose M here: the module will be
469 called ni_at_a2150.
470
471config COMEDI_NI_AT_AO
472 tristate "NI AT-AO-6/10 EISA card support"
473 select COMEDI_8254
474 help
475 Enable support for National Instruments AT-AO-6/10 cards
476
477 To compile this driver as a module, choose M here: the module will be
478 called ni_at_ao.
479
480config COMEDI_NI_ATMIO
481 tristate "NI AT-MIO E series ISA-PNP card support"
482 select COMEDI_8255
483 select COMEDI_NI_TIO
484 help
485 Enable support for National Instruments AT-MIO E series cards
486 National Instruments AT-MIO-16E-1 (ni_atmio),
487 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
488 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
489
490 To compile this driver as a module, choose M here: the module will be
491 called ni_atmio.
492
493config COMEDI_NI_ATMIO16D
494 tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
495 select COMEDI_8255
496 help
497 Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
498
499 To compile this driver as a module, choose M here: the module will be
500 called ni_atmio16d.
501
502config COMEDI_NI_LABPC_ISA
503 tristate "NI Lab-PC and compatibles ISA support"
504 select COMEDI_NI_LABPC
505 help
506 Enable support for National Instruments Lab-PC and compatibles
507 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
508 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
509 not yet been added to the driver.
510
511 To compile this driver as a module, choose M here: the module will be
512 called ni_labpc.
513
514config COMEDI_PCMAD
515 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
516 help
517 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
518
519 To compile this driver as a module, choose M here: the module will be
520 called pcmad.
521
522config COMEDI_PCMDA12
523 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
524 help
525 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
526 Note that the board is not ISA-PNP capable and thus needs the I/O
527 port comedi_config parameter.
528
529 To compile this driver as a module, choose M here: the module will be
530 called pcmda12.
531
532config COMEDI_PCMMIO
533 tristate "Winsystems PCM-MIO PC/104 board support"
534 help
535 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
536
537 To compile this driver as a module, choose M here: the module will be
538 called pcmmio.
539
540config COMEDI_PCMUIO
541 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
542 help
543 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
544
545 To compile this driver as a module, choose M here: the module will be
546 called pcmuio.
547
548config COMEDI_MULTIQ3
549 tristate "Quanser Consulting MultiQ-3 ISA card support"
550 help
551 Enable support for Quanser Consulting MultiQ-3 ISA cards
552
553 To compile this driver as a module, choose M here: the module will be
554 called multiq3.
555
556config COMEDI_S526
557 tristate "Sensoray s526 support"
558 help
559 Enable support for Sensoray s526
560
561 To compile this driver as a module, choose M here: the module will be
562 called s526.
563
564endif # COMEDI_ISA_DRIVERS
565
566menuconfig COMEDI_PCI_DRIVERS
567 tristate "Comedi PCI drivers"
568 depends on PCI
569 help
570 Enable support for comedi PCI drivers.
571
572 To compile this support as a module, choose M here: the module will
573 be called comedi_pci.
574
575if COMEDI_PCI_DRIVERS
576
577config COMEDI_8255_PCI
578 tristate "Generic PCI based 8255 digital i/o board support"
579 select COMEDI_8255
580 help
581 Enable support for PCI based 8255 digital i/o boards. This driver
582 provides a PCI wrapper around the generic 8255 driver.
583
584 Supported boards:
585 ADlink - PCI-7224, PCI-7248, and PCI-7296
586 Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
587 PCI-DIO96H
588 National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
589 PCI-6503B, PCI-6503X, and PXI-6503
590
591 To compile this driver as a module, choose M here: the module will
592 be called 8255_pci.
593
594config COMEDI_ADDI_WATCHDOG
595 tristate
596 depends on HAS_IOPORT
597 help
598 Provides support for the watchdog subdevice found on many ADDI-DATA
599 boards. This module will be automatically selected when needed. The
600 module will be called addi_watchdog.
601
602config COMEDI_ADDI_APCI_1032
603 tristate "ADDI-DATA APCI_1032 support"
604 depends on HAS_IOPORT
605 help
606 Enable support for ADDI-DATA APCI_1032 cards
607
608 To compile this driver as a module, choose M here: the module will be
609 called addi_apci_1032.
610
611config COMEDI_ADDI_APCI_1500
612 tristate "ADDI-DATA APCI_1500 support"
613 depends on HAS_IOPORT
614 help
615 Enable support for ADDI-DATA APCI_1500 cards
616
617 To compile this driver as a module, choose M here: the module will be
618 called addi_apci_1500.
619
620config COMEDI_ADDI_APCI_1516
621 tristate "ADDI-DATA APCI-1016/1516/2016 support"
622 depends on HAS_IOPORT
623 select COMEDI_ADDI_WATCHDOG
624 help
625 Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
626 These are 16 channel, optically isolated, digital I/O boards. The 1516
627 and 2016 boards also have a watchdog for resetting the outputs to "0".
628
629 To compile this driver as a module, choose M here: the module will be
630 called addi_apci_1516.
631
632config COMEDI_ADDI_APCI_1564
633 tristate "ADDI-DATA APCI_1564 support"
634 depends on HAS_IOPORT
635 select COMEDI_ADDI_WATCHDOG
636 help
637 Enable support for ADDI-DATA APCI_1564 cards
638
639 To compile this driver as a module, choose M here: the module will be
640 called addi_apci_1564.
641
642config COMEDI_ADDI_APCI_16XX
643 tristate "ADDI-DATA APCI_16xx support"
644 depends on HAS_IOPORT
645 help
646 Enable support for ADDI-DATA APCI_16xx cards
647
648 To compile this driver as a module, choose M here: the module will be
649 called addi_apci_16xx.
650
651config COMEDI_ADDI_APCI_2032
652 tristate "ADDI-DATA APCI_2032 support"
653 depends on HAS_IOPORT
654 select COMEDI_ADDI_WATCHDOG
655 help
656 Enable support for ADDI-DATA APCI_2032 cards
657
658 To compile this driver as a module, choose M here: the module will be
659 called addi_apci_2032.
660
661config COMEDI_ADDI_APCI_2200
662 tristate "ADDI-DATA APCI_2200 support"
663 depends on HAS_IOPORT
664 select COMEDI_ADDI_WATCHDOG
665 help
666 Enable support for ADDI-DATA APCI_2200 cards
667
668 To compile this driver as a module, choose M here: the module will be
669 called addi_apci_2200.
670
671config COMEDI_ADDI_APCI_3120
672 tristate "ADDI-DATA APCI_3120/3001 support"
673 depends on HAS_IOPORT
674 depends on HAS_DMA
675 help
676 Enable support for ADDI-DATA APCI_3120/3001 cards
677
678 To compile this driver as a module, choose M here: the module will be
679 called addi_apci_3120.
680
681config COMEDI_ADDI_APCI_3501
682 tristate "ADDI-DATA APCI_3501 support"
683 depends on HAS_IOPORT
684 help
685 Enable support for ADDI-DATA APCI_3501 cards
686
687 To compile this driver as a module, choose M here: the module will be
688 called addi_apci_3501.
689
690config COMEDI_ADDI_APCI_3XXX
691 tristate "ADDI-DATA APCI_3xxx support"
692 depends on HAS_IOPORT
693 help
694 Enable support for ADDI-DATA APCI_3xxx cards
695
696 To compile this driver as a module, choose M here: the module will be
697 called addi_apci_3xxx.
698
699config COMEDI_ADL_PCI6208
700 tristate "ADLink PCI-6208A support"
701 depends on HAS_IOPORT
702 help
703 Enable support for ADLink PCI-6208A cards
704
705 To compile this driver as a module, choose M here: the module will be
706 called adl_pci6208.
707
708config COMEDI_ADL_PCI7250
709 tristate "ADLink PCI-7250 support"
710 help
711 Enable support for ADLink PCI-7250/LPCI-7250/LPCIe-7250 relay output
712 and isolated digital input boards.
713
714 To compile this driver as a module, choose M here: the module will be
715 called adl_pci7250.
716
717config COMEDI_ADL_PCI7X3X
718 tristate "ADLink PCI-723X/743X isolated digital i/o board support"
719 depends on HAS_IOPORT
720 help
721 Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
722 Supported boards include the 32-channel PCI-7230 (16 in/16 out),
723 PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
724 PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
725
726 To compile this driver as a module, choose M here: the module will be
727 called adl_pci7x3x.
728
729config COMEDI_ADL_PCI8164
730 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
731 depends on HAS_IOPORT
732 help
733 Enable support for ADlink PCI-8164 4 Axes Motion Control board
734
735 To compile this driver as a module, choose M here: the module will be
736 called adl_pci8164.
737
738config COMEDI_ADL_PCI9111
739 tristate "ADLink PCI-9111HR support"
740 depends on HAS_IOPORT
741 select COMEDI_8254
742 help
743 Enable support for ADlink PCI9111 cards
744
745 To compile this driver as a module, choose M here: the module will be
746 called adl_pci9111.
747
748config COMEDI_ADL_PCI9118
749 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
750 depends on HAS_IOPORT
751 depends on HAS_DMA
752 select COMEDI_8254
753 help
754 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
755
756 To compile this driver as a module, choose M here: the module will be
757 called adl_pci9118.
758
759config COMEDI_ADV_PCI1710
760 tristate "Advantech PCI-171x and PCI-1731 support"
761 depends on HAS_IOPORT
762 select COMEDI_8254
763 help
764 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
765 PCI-1713 and PCI-1731
766
767 To compile this driver as a module, choose M here: the module will be
768 called adv_pci1710.
769
770config COMEDI_ADV_PCI1720
771 tristate "Advantech PCI-1720 support"
772 depends on HAS_IOPORT
773 help
774 Enable support for Advantech PCI-1720 Analog Output board.
775
776 To compile this driver as a module, choose M here: the module will be
777 called adv_pci1720.
778
779config COMEDI_ADV_PCI1723
780 tristate "Advantech PCI-1723 support"
781 depends on HAS_IOPORT
782 help
783 Enable support for Advantech PCI-1723 cards
784
785 To compile this driver as a module, choose M here: the module will be
786 called adv_pci1723.
787
788config COMEDI_ADV_PCI1724
789 tristate "Advantech PCI-1724U support"
790 depends on HAS_IOPORT
791 help
792 Enable support for Advantech PCI-1724U cards. These are 32-channel
793 analog output cards with voltage and current loop output ranges and
794 14-bit resolution.
795
796 To compile this driver as a module, choose M here: the module will be
797 called adv_pci1724.
798
799config COMEDI_ADV_PCI1760
800 tristate "Advantech PCI-1760 support"
801 depends on HAS_IOPORT
802 help
803 Enable support for Advantech PCI-1760 board.
804
805 To compile this driver as a module, choose M here: the module will be
806 called adv_pci1760.
807
808config COMEDI_ADV_PCI_DIO
809 tristate "Advantech PCI DIO card support"
810 depends on HAS_IOPORT
811 select COMEDI_8254
812 select COMEDI_8255
813 help
814 Enable support for Advantech PCI DIO cards
815 PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
816 PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
817 PCI-1761 and PCI-1762
818
819 To compile this driver as a module, choose M here: the module will be
820 called adv_pci_dio.
821
822config COMEDI_AMPLC_DIO200_PCI
823 tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
824 select COMEDI_AMPLC_DIO200
825 help
826 Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
827 and PCIe296 DIO boards.
828
829 To compile this driver as a module, choose M here: the module will be
830 called amplc_dio200_pci.
831
832config COMEDI_AMPLC_PC236_PCI
833 tristate "Amplicon PCI236 DIO board support"
834 depends on HAS_IOPORT
835 select COMEDI_AMPLC_PC236
836 help
837 Enable support for Amplicon PCI236 DIO board.
838
839 To compile this driver as a module, choose M here: the module will be
840 called amplc_pci236.
841
842config COMEDI_AMPLC_PC263_PCI
843 tristate "Amplicon PCI263 relay board support"
844 depends on HAS_IOPORT
845 help
846 Enable support for Amplicon PCI263 relay board. This is a PCI board
847 with 16 reed relay output channels.
848
849 To compile this driver as a module, choose M here: the module will be
850 called amplc_pci263.
851
852config COMEDI_AMPLC_PCI224
853 tristate "Amplicon PCI224 and PCI234 support"
854 depends on HAS_IOPORT
855 select COMEDI_8254
856 help
857 Enable support for Amplicon PCI224 and PCI234 AO boards
858
859 To compile this driver as a module, choose M here: the module will be
860 called amplc_pci224.
861
862config COMEDI_AMPLC_PCI230
863 tristate "Amplicon PCI230 and PCI260 support"
864 depends on HAS_IOPORT
865 select COMEDI_8254
866 select COMEDI_8255
867 help
868 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
869 boards
870
871 To compile this driver as a module, choose M here: the module will be
872 called amplc_pci230.
873
874config COMEDI_CONTEC_PCI_DIO
875 tristate "Contec PIO1616L digital I/O board support"
876 depends on HAS_IOPORT
877 help
878 Enable support for the Contec PIO1616L digital I/O board
879
880 To compile this driver as a module, choose M here: the module will be
881 called contec_pci_dio.
882
883config COMEDI_DAS08_PCI
884 tristate "DAS-08 PCI support"
885 depends on HAS_IOPORT
886 select COMEDI_DAS08
887 help
888 Enable support for PCI DAS-08 cards.
889
890 To compile this driver as a module, choose M here: the module will be
891 called das08_pci.
892
893config COMEDI_DT3000
894 tristate "Data Translation DT3000 series support"
895 help
896 Enable support for Data Translation DT3000 series
897 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
898 DT3004-200
899
900 To compile this driver as a module, choose M here: the module will be
901 called dt3000.
902
903config COMEDI_DYNA_PCI10XX
904 tristate "Dynalog PCI DAQ series support"
905 depends on HAS_IOPORT
906 help
907 Enable support for Dynalog PCI DAQ series
908 PCI-1050
909
910 To compile this driver as a module, choose M here: the module will be
911 called dyna_pci10xx.
912
913config COMEDI_GSC_HPDI
914 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
915 help
916 Enable support for General Standards Corporation high speed parallel
917 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
918 Only receive mode works, transmit not supported.
919
920 To compile this driver as a module, choose M here: the module will be
921 called gsc_hpdi.
922
923config COMEDI_MF6X4
924 tristate "Humusoft MF634 and MF624 DAQ Card support"
925 help
926 This driver supports both Humusoft MF634 and MF624 Data acquisition
927 cards. The legacy Humusoft MF614 card is not supported.
928
929config COMEDI_ICP_MULTI
930 tristate "Inova ICP_MULTI support"
931 help
932 Enable support for Inova ICP_MULTI card
933
934 To compile this driver as a module, choose M here: the module will be
935 called icp_multi.
936
937config COMEDI_DAQBOARD2000
938 tristate "IOtech DAQboard/2000 support"
939 select COMEDI_8255
940 help
941 Enable support for the IOtech DAQboard/2000
942
943 To compile this driver as a module, choose M here: the module will be
944 called daqboard2000.
945
946config COMEDI_JR3_PCI
947 tristate "JR3/PCI force sensor board support"
948 help
949 Enable support for JR3/PCI force sensor boards
950
951 To compile this driver as a module, choose M here: the module will be
952 called jr3_pci.
953
954config COMEDI_KE_COUNTER
955 tristate "Kolter-Electronic PCI Counter 1 card support"
956 depends on HAS_IOPORT
957 help
958 Enable support for Kolter-Electronic PCI Counter 1 cards
959
960 To compile this driver as a module, choose M here: the module will be
961 called ke_counter.
962
963config COMEDI_CB_PCIDAS64
964 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
965 select COMEDI_8255
966 help
967 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
968 60xx, and 4020 series with the PLX 9080 PCI controller
969
970 To compile this driver as a module, choose M here: the module will be
971 called cb_pcidas64.
972
973config COMEDI_CB_PCIDAS
974 tristate "MeasurementComputing PCI-DAS support"
975 depends on HAS_IOPORT
976 select COMEDI_8254
977 select COMEDI_8255
978 help
979 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
980 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
981 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
982 and PCI_DAS1002.
983
984 To compile this driver as a module, choose M here: the module will be
985 called cb_pcidas.
986
987config COMEDI_CB_PCIDDA
988 tristate "MeasurementComputing PCI-DDA series support"
989 depends on HAS_IOPORT
990 select COMEDI_8255
991 help
992 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
993 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
994 PCI-DDA04/16 and PCI-DDA02/16
995
996 To compile this driver as a module, choose M here: the module will be
997 called cb_pcidda.
998
999config COMEDI_CB_PCIMDAS
1000 tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
1001 depends on HAS_IOPORT
1002 select COMEDI_8254
1003 select COMEDI_8255
1004 help
1005 Enable support for ComputerBoards/MeasurementComputing PCI Migration
1006 series PCIM-DAS1602/16 and PCIe-DAS1602/16.
1007
1008 To compile this driver as a module, choose M here: the module will be
1009 called cb_pcimdas.
1010
1011config COMEDI_CB_PCIMDDA
1012 tristate "MeasurementComputing PCIM-DDA06-16 support"
1013 depends on HAS_IOPORT
1014 select COMEDI_8255
1015 help
1016 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
1017
1018 To compile this driver as a module, choose M here: the module will be
1019 called cb_pcimdda.
1020
1021config COMEDI_ME4000
1022 tristate "Meilhaus ME-4000 support"
1023 depends on HAS_IOPORT
1024 select COMEDI_8254
1025 help
1026 Enable support for Meilhaus PCI data acquisition cards
1027 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
1028
1029 To compile this driver as a module, choose M here: the module will be
1030 called me4000.
1031
1032config COMEDI_ME_DAQ
1033 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
1034 help
1035 Enable support for Meilhaus PCI data acquisition cards
1036 ME-2000i, ME-2600i and ME-3000vm1
1037
1038 To compile this driver as a module, choose M here: the module will be
1039 called me_daq.
1040
1041config COMEDI_NI_6527
1042 tristate "NI 6527 support"
1043 help
1044 Enable support for the National Instruments 6527 PCI card
1045
1046 To compile this driver as a module, choose M here: the module will be
1047 called ni_6527.
1048
1049config COMEDI_NI_65XX
1050 tristate "NI 65xx static dio PCI card support"
1051 help
1052 Enable support for National Instruments 65xx static dio boards.
1053 Supported devices: National Instruments PCI-6509 (ni_65xx),
1054 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
1055 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
1056 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1057
1058 To compile this driver as a module, choose M here: the module will be
1059 called ni_65xx.
1060
1061config COMEDI_NI_660X
1062 tristate "NI 660x counter/timer PCI card support"
1063 depends on HAS_DMA
1064 select COMEDI_NI_TIOCMD
1065 help
1066 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1067 PXI-6602, PXI-6608, PCI-6624, and PXI-6624.
1068
1069 To compile this driver as a module, choose M here: the module will be
1070 called ni_660x.
1071
1072config COMEDI_NI_670X
1073 tristate "NI 670x PCI card support"
1074 help
1075 Enable support for National Instruments PCI-6703 and PCI-6704
1076
1077 To compile this driver as a module, choose M here: the module will be
1078 called ni_670x.
1079
1080config COMEDI_NI_LABPC_PCI
1081 tristate "NI Lab-PC PCI-1200 support"
1082 select COMEDI_NI_LABPC
1083 help
1084 Enable support for National Instruments Lab-PC PCI-1200.
1085
1086 To compile this driver as a module, choose M here: the module will be
1087 called ni_labpc_pci.
1088
1089config COMEDI_NI_PCIDIO
1090 tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1091 depends on HAS_DMA
1092 select COMEDI_MITE
1093 help
1094 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1095 PCI-6533 and PCI-6534
1096
1097 To compile this driver as a module, choose M here: the module will be
1098 called ni_pcidio.
1099
1100config COMEDI_NI_PCIMIO
1101 tristate "NI PCI-MIO-E series and M series support"
1102 depends on HAS_DMA
1103 select COMEDI_NI_TIOCMD
1104 select COMEDI_8255
1105 help
1106 Enable support for National Instruments PCI-MIO-E series and M series
1107 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1108 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1109 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1110 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1111 PCI-6220, PXI-6220, PCI-6221, PXI-6221, PCI-6224, PXI-6224, PCI-6225,
1112 PXI-6225, PCI-6229, PXI-6229, PCI-6250, PXI-6250, PCI-6251, PXI-6251,
1113 PCIe-6251, PXIe-6251, PCI-6254, PXI-6254, PCI-6259, PXI-6259,
1114 PCIe-6259, PXIe-6259, PCI-6280, PXI-6280, PCI-6281, PXI-6281,
1115 PCI-6284, PXI-6284, PCI-6289, PXI-6289, PCI-6711, PXI-6711,
1116 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1117 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1118
1119 To compile this driver as a module, choose M here: the module will be
1120 called ni_pcimio.
1121
1122config COMEDI_RTD520
1123 tristate "Real Time Devices PCI4520/DM7520 support"
1124 select COMEDI_8254
1125 help
1126 Enable support for Real Time Devices PCI4520/DM7520
1127
1128 To compile this driver as a module, choose M here: the module will be
1129 called rtd520.
1130
1131config COMEDI_S626
1132 tristate "Sensoray 626 support"
1133 help
1134 Enable support for Sensoray 626
1135
1136 To compile this driver as a module, choose M here: the module will be
1137 called s626.
1138
1139config COMEDI_MITE
1140 depends on HAS_DMA
1141 tristate
1142
1143config COMEDI_NI_TIOCMD
1144 tristate
1145 depends on HAS_DMA
1146 select COMEDI_NI_TIO
1147 select COMEDI_MITE
1148
1149endif # COMEDI_PCI_DRIVERS
1150
1151menuconfig COMEDI_PCMCIA_DRIVERS
1152 tristate "Comedi PCMCIA drivers"
1153 depends on PCMCIA && HAS_IOPORT
1154 help
1155 Enable support for comedi PCMCIA drivers.
1156
1157 To compile this support as a module, choose M here: the module will
1158 be called comedi_pcmcia.
1159
1160if COMEDI_PCMCIA_DRIVERS
1161
1162config COMEDI_CB_DAS16_CS
1163 tristate "CB DAS16 series PCMCIA support"
1164 select COMEDI_8254
1165 help
1166 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1167 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1168
1169 To compile this driver as a module, choose M here: the module will be
1170 called cb_das16_cs.
1171
1172config COMEDI_DAS08_CS
1173 tristate "CB DAS08 PCMCIA support"
1174 select COMEDI_DAS08
1175 help
1176 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1177 PCMCIA card
1178
1179 To compile this driver as a module, choose M here: the module will be
1180 called das08_cs.
1181
1182config COMEDI_NI_DAQ_700_CS
1183 tristate "NI DAQCard-700 PCMCIA support"
1184 help
1185 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1186
1187 To compile this driver as a module, choose M here: the module will be
1188 called ni_daq_700.
1189
1190config COMEDI_NI_DAQ_DIO24_CS
1191 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1192 select COMEDI_8255
1193 help
1194 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1195
1196 To compile this driver as a module, choose M here: the module will be
1197 called ni_daq_dio24.
1198
1199config COMEDI_NI_LABPC_CS
1200 tristate "NI DAQCard-1200 PCMCIA support"
1201 select COMEDI_NI_LABPC
1202 help
1203 Enable support for the National Instruments PCMCIA DAQCard-1200
1204
1205 To compile this driver as a module, choose M here: the module will be
1206 called ni_labpc_cs.
1207
1208config COMEDI_NI_MIO_CS
1209 tristate "NI DAQCard E series PCMCIA support"
1210 select COMEDI_NI_TIO
1211 select COMEDI_8255
1212 help
1213 Enable support for the National Instruments PCMCIA DAQCard E series
1214 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1215 and DAQCard-6036E
1216
1217 To compile this driver as a module, choose M here: the module will be
1218 called ni_mio_cs.
1219
1220config COMEDI_QUATECH_DAQP_CS
1221 tristate "Quatech DAQP PCMCIA data capture card support"
1222 help
1223 Enable support for the Quatech DAQP PCMCIA data capture cards
1224 DAQP-208 and DAQP-308
1225
1226 To compile this driver as a module, choose M here: the module will be
1227 called quatech_daqp_cs.
1228
1229endif # COMEDI_PCMCIA_DRIVERS
1230
1231menuconfig COMEDI_USB_DRIVERS
1232 tristate "Comedi USB drivers"
1233 depends on USB
1234 help
1235 Enable support for comedi USB drivers.
1236
1237 To compile this support as a module, choose M here: the module will
1238 be called comedi_usb.
1239
1240if COMEDI_USB_DRIVERS
1241
1242config COMEDI_DT9812
1243 tristate "DataTranslation DT9812 USB module support"
1244 help
1245 Enable support for the Data Translation DT9812 USB module
1246
1247 To compile this driver as a module, choose M here: the module will be
1248 called dt9812.
1249
1250config COMEDI_NI_USB6501
1251 tristate "NI USB-6501 support"
1252 help
1253 Enable support for the National Instruments USB-6501 module.
1254
1255 The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
1256 provides 24 digital I/O lines channels and one 32-bit counter.
1257
1258 To compile this driver as a module, choose M here: the module will be
1259 called ni_usb6501.
1260
1261config COMEDI_USBDUX
1262 tristate "ITL USB-DUX-D support"
1263 help
1264 Enable support for the Incite Technology Ltd USB-DUX-D Board
1265
1266 To compile this driver as a module, choose M here: the module will be
1267 called usbdux.
1268
1269config COMEDI_USBDUXFAST
1270 tristate "ITL USB-DUXfast support"
1271 help
1272 Enable support for the Incite Technology Ltd USB-DUXfast Board
1273
1274 To compile this driver as a module, choose M here: the module will be
1275 called usbduxfast.
1276
1277config COMEDI_USBDUXSIGMA
1278 tristate "ITL USB-DUXsigma support"
1279 help
1280 Enable support for the Incite Technology Ltd USB-DUXsigma Board
1281
1282 To compile this driver as a module, choose M here: the module will be
1283 called usbduxsigma.
1284
1285config COMEDI_VMK80XX
1286 tristate "Velleman VM110/VM140 USB Board support"
1287 help
1288 Build the Velleman USB Board Low-Level Driver supporting the
1289 K8055/K8061 aka VM110/VM140 devices
1290
1291 To compile this driver as a module, choose M here: the module will be
1292 called vmk80xx.
1293
1294endif # COMEDI_USB_DRIVERS
1295
1296config COMEDI_8254
1297 tristate
1298
1299config COMEDI_8255
1300 tristate
1301
1302config COMEDI_8255_SA
1303 tristate "Standalone 8255 support"
1304 depends on HAS_IOPORT
1305 select COMEDI_8255
1306 help
1307 Enable support for 8255 digital I/O as a standalone driver.
1308
1309 You should enable compilation this driver if you plan to use a board
1310 that has an 8255 chip at a known I/O base address and there are no
1311 other Comedi drivers for the board.
1312
1313 Note that Comedi drivers for most multi-function boards incorporating
1314 an 8255 chip use the 'comedi_8255' module. Most PCI-based 8255
1315 boards use the 8255_pci driver as a wrapper around the 'comedi_8255'
1316 module.
1317
1318 To compile this driver as a module, choose M here: the module will be
1319 called 8255.
1320
1321config COMEDI_KCOMEDILIB
1322 tristate "Comedi kcomedilib"
1323 help
1324 Build the kcomedilib.
1325
1326 This is a kernel module used to open and manipulate Comedi devices
1327 from within kernel code. It is currently only used by the
1328 comedi_bond driver, and its functionality has been stripped down to
1329 the needs of that driver, so is currently not very useful for
1330 anything else.
1331
1332 To compile kcomedilib as a module, choose M here: the module will be
1333 called kcomedilib.
1334
1335config COMEDI_AMPLC_DIO200
1336 select COMEDI_8254
1337 tristate
1338
1339config COMEDI_AMPLC_PC236
1340 tristate
1341 depends on HAS_IOPORT
1342 select COMEDI_8255
1343
1344config COMEDI_DAS08
1345 tristate
1346 depends on HAS_IOPORT
1347 select COMEDI_8254
1348 select COMEDI_8255
1349
1350config COMEDI_ISADMA
1351 tristate
1352
1353config COMEDI_NI_LABPC
1354 tristate
1355 select COMEDI_8254
1356 select COMEDI_8255
1357
1358config COMEDI_NI_LABPC_ISADMA
1359 tristate
1360 default COMEDI_NI_LABPC
1361 depends on COMEDI_NI_LABPC_ISA != n
1362 depends on ISA_DMA_API
1363 select COMEDI_ISADMA
1364
1365config COMEDI_NI_TIO
1366 tristate
1367 select COMEDI_NI_ROUTING
1368
1369config COMEDI_NI_ROUTING
1370 tristate
1371
1372config COMEDI_TESTS
1373 tristate "Comedi unit tests"
1374 help
1375 Enable comedi unit-test modules to be built.
1376
1377 Note that the answer to this question won't directly affect the
1378 kernel: saying N will just cause the configurator to skip all
1379 the questions about comedi unit-test modules.
1380
1381if COMEDI_TESTS
1382
1383config COMEDI_TESTS_EXAMPLE
1384 tristate "Comedi example unit-test module"
1385 help
1386 Enable support for an example unit-test module. This is just a
1387 silly example to be used as a basis for writing other unit-test
1388 modules.
1389
1390 To compile this as a module, choose M here: the module will be called
1391 comedi_example_test.
1392
1393config COMEDI_TESTS_NI_ROUTES
1394 tristate "NI routing unit-test module"
1395 select COMEDI_NI_ROUTING
1396 help
1397 Enable support for a unit-test module to test the signal routing
1398 code used by comedi drivers for various National Instruments cards.
1399
1400 To compile this as a module, choose M here: the module will be called
1401 ni_routes_test.
1402
1403endif # COMEDI_TESTS
1404
1405endif # COMEDI