projects/linux·blob master · refs

393 lines · 13.0 KiB

1// SPDX-License-Identifier: GPL-2.0
2/*
3 * CAAM Error Reporting
4 *
5 * Copyright 2009-2011 Freescale Semiconductor, Inc.
6 */
7
8#include "compat.h"
9#include "regs.h"
10#include "desc.h"
11#include "error.h"
12
13#ifdef DEBUG
14#include <linux/highmem.h>
15
16void caam_dump_sg(const char *prefix_str, int prefix_type,
17 int rowsize, int groupsize, struct scatterlist *sg,
18 size_t tlen, bool ascii)
19{
20 struct scatterlist *it;
21 void *it_page;
22 size_t len;
23 void *buf;
24
25 for (it = sg; it && tlen > 0 ; it = sg_next(it)) {
26 /*
27 * make sure the scatterlist's page
28 * has a valid virtual memory mapping
29 */
30 it_page = kmap_atomic(sg_page(it));
31 if (unlikely(!it_page)) {
32 pr_err("caam_dump_sg: kmap failed\n");
33 return;
34 }
35
36 buf = it_page + it->offset;
37 len = min_t(size_t, tlen, it->length);
38 print_hex_dump_debug(prefix_str, prefix_type, rowsize,
39 groupsize, buf, len, ascii);
40 tlen -= len;
41
42 kunmap_atomic(it_page);
43 }
44}
45#else
46void caam_dump_sg(const char *prefix_str, int prefix_type,
47 int rowsize, int groupsize, struct scatterlist *sg,
48 size_t tlen, bool ascii)
49{}
50#endif /* DEBUG */
51EXPORT_SYMBOL(caam_dump_sg);
52
53bool caam_little_end;
54EXPORT_SYMBOL(caam_little_end);
55
56bool caam_imx;
57EXPORT_SYMBOL(caam_imx);
58
59size_t caam_ptr_sz;
60EXPORT_SYMBOL(caam_ptr_sz);
61
62static const struct {
63 u8 value;
64 const char *error_text;
65} desc_error_list[] = {
66 { 0x00, "No error." },
67 { 0x01, "SGT Length Error. The descriptor is trying to read more data than is contained in the SGT table." },
68 { 0x02, "SGT Null Entry Error." },
69 { 0x03, "Job Ring Control Error. There is a bad value in the Job Ring Control register." },
70 { 0x04, "Invalid Descriptor Command. The Descriptor Command field is invalid." },
71 { 0x05, "Reserved." },
72 { 0x06, "Invalid KEY Command" },
73 { 0x07, "Invalid LOAD Command" },
74 { 0x08, "Invalid STORE Command" },
75 { 0x09, "Invalid OPERATION Command" },
76 { 0x0A, "Invalid FIFO LOAD Command" },
77 { 0x0B, "Invalid FIFO STORE Command" },
78 { 0x0C, "Invalid MOVE/MOVE_LEN Command" },
79 { 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is invalid because the target is not a Job Header Command, or the jump is from a Trusted Descriptor to a Job Descriptor, or because the target Descriptor contains a Shared Descriptor." },
80 { 0x0E, "Invalid MATH Command" },
81 { 0x0F, "Invalid SIGNATURE Command" },
82 { 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO LOAD, or SEQ FIFO STORE decremented the input or output sequence length below 0. This error may result if a built-in PROTOCOL Command has encountered a malformed PDU." },
83 { 0x11, "Skip data type invalid. The type must be 0xE or 0xF."},
84 { 0x12, "Shared Descriptor Header Error" },
85 { 0x13, "Header Error. Invalid length or parity, or certain other problems." },
86 { 0x14, "Burster Error. Burster has gotten to an illegal state" },
87 { 0x15, "Context Register Length Error. The descriptor is trying to read or write past the end of the Context Register. A SEQ LOAD or SEQ STORE with the VLF bit set was executed with too large a length in the variable length register (VSOL for SEQ STORE or VSIL for SEQ LOAD)." },
88 { 0x16, "DMA Error" },
89 { 0x17, "Reserved." },
90 { 0x1A, "Job failed due to JR reset" },
91 { 0x1B, "Job failed due to Fail Mode" },
92 { 0x1C, "DECO Watchdog timer timeout error" },
93 { 0x1D, "DECO tried to copy a key from another DECO but the other DECO's Key Registers were locked" },
94 { 0x1E, "DECO attempted to copy data from a DECO that had an unmasked Descriptor error" },
95 { 0x1F, "LIODN error. DECO was trying to share from itself or from another DECO but the two Non-SEQ LIODN values didn't match or the 'shared from' DECO's Descriptor required that the SEQ LIODNs be the same and they aren't." },
96 { 0x20, "DECO has completed a reset initiated via the DRR register" },
97 { 0x21, "Nonce error. When using EKT (CCM) key encryption option in the FIFO STORE Command, the Nonce counter reached its maximum value and this encryption mode can no longer be used." },
98 { 0x22, "Meta data is too large (> 511 bytes) for TLS decap (input frame; block ciphers) and IPsec decap (output frame, when doing the next header byte update) and DCRC (output frame)." },
99 { 0x23, "Read Input Frame error" },
100 { 0x24, "JDKEK, TDKEK or TDSK not loaded error" },
101 { 0x80, "DNR (do not run) error" },
102 { 0x81, "undefined protocol command" },
103 { 0x82, "invalid setting in PDB" },
104 { 0x83, "Anti-replay LATE error" },
105 { 0x84, "Anti-replay REPLAY error" },
106 { 0x85, "Sequence number overflow" },
107 { 0x86, "Sigver invalid signature" },
108 { 0x87, "DSA Sign Illegal test descriptor" },
109 { 0x88, "Protocol Format Error - A protocol has seen an error in the format of data received. When running RSA, this means that formatting with random padding was used, and did not follow the form: 0x00, 0x02, 8-to-N bytes of non-zero pad, 0x00, F data." },
110 { 0x89, "Protocol Size Error - A protocol has seen an error in size. When running RSA, pdb size N < (size of F) when no formatting is used; or pdb size N < (F + 11) when formatting is used." },
111 { 0xC1, "Blob Command error: Undefined mode" },
112 { 0xC2, "Blob Command error: Secure Memory Blob mode error" },
113 { 0xC4, "Blob Command error: Black Blob key or input size error" },
114 { 0xC5, "Blob Command error: Invalid key destination" },
115 { 0xC8, "Blob Command error: Trusted/Secure mode error" },
116 { 0xF0, "IPsec TTL or hop limit field either came in as 0, or was decremented to 0" },
117 { 0xF1, "3GPP HFN matches or exceeds the Threshold" },
118};
119
120static const struct {
121 u8 value;
122 const char *error_text;
123} qi_error_list[] = {
124 { 0x00, "No error" },
125 { 0x1F, "Job terminated by FQ or ICID flush" },
126 { 0x20, "FD format error"},
127 { 0x21, "FD command format error"},
128 { 0x23, "FL format error"},
129 { 0x25, "CRJD specified in FD, but not enabled in FLC"},
130 { 0x30, "Max. buffer size too small"},
131 { 0x31, "DHR exceeds max. buffer size (allocate mode, S/G format)"},
132 { 0x32, "SGT exceeds max. buffer size (allocate mode, S/G format"},
133 { 0x33, "Size over/underflow (allocate mode)"},
134 { 0x34, "Size over/underflow (reuse mode)"},
135 { 0x35, "Length exceeds max. short length (allocate mode, S/G/ format)"},
136 { 0x36, "Memory footprint exceeds max. value (allocate mode, S/G/ format)"},
137 { 0x41, "SBC frame format not supported (allocate mode)"},
138 { 0x42, "Pool 0 invalid / pool 1 size < pool 0 size (allocate mode)"},
139 { 0x43, "Annotation output enabled but ASAR = 0 (allocate mode)"},
140 { 0x44, "Unsupported or reserved frame format or SGHR = 1 (reuse mode)"},
141 { 0x45, "DHR correction underflow (reuse mode, single buffer format)"},
142 { 0x46, "Annotation length exceeds offset (reuse mode)"},
143 { 0x48, "Annotation output enabled but ASA limited by ASAR (reuse mode)"},
144 { 0x49, "Data offset correction exceeds input frame data length (reuse mode)"},
145 { 0x4B, "Annotation output enabled but ASA cannot be expanded (frame list)"},
146 { 0x51, "Unsupported IF reuse mode"},
147 { 0x52, "Unsupported FL use mode"},
148 { 0x53, "Unsupported RJD use mode"},
149 { 0x54, "Unsupported inline descriptor use mode"},
150 { 0xC0, "Table buffer pool 0 depletion"},
151 { 0xC1, "Table buffer pool 1 depletion"},
152 { 0xC2, "Data buffer pool 0 depletion, no OF allocated"},
153 { 0xC3, "Data buffer pool 1 depletion, no OF allocated"},
154 { 0xC4, "Data buffer pool 0 depletion, partial OF allocated"},
155 { 0xC5, "Data buffer pool 1 depletion, partial OF allocated"},
156 { 0xD0, "FLC read error"},
157 { 0xD1, "FL read error"},
158 { 0xD2, "FL write error"},
159 { 0xD3, "OF SGT write error"},
160 { 0xD4, "PTA read error"},
161 { 0xD5, "PTA write error"},
162 { 0xD6, "OF SGT F-bit write error"},
163 { 0xD7, "ASA write error"},
164 { 0xE1, "FLC[ICR]=0 ICID error"},
165 { 0xE2, "FLC[ICR]=1 ICID error"},
166 { 0xE4, "source of ICID flush not trusted (BDI = 0)"},
167};
168
169static const char * const cha_id_list[] = {
170 "",
171 "AES",
172 "DES",
173 "ARC4",
174 "MDHA",
175 "RNG",
176 "SNOW f8",
177 "Kasumi f8/9",
178 "PKHA",
179 "CRCA",
180 "SNOW f9",
181 "ZUCE",
182 "ZUCA",
183};
184
185static const char * const err_id_list[] = {
186 "No error.",
187 "Mode error.",
188 "Data size error.",
189 "Key size error.",
190 "PKHA A memory size error.",
191 "PKHA B memory size error.",
192 "Data arrived out of sequence error.",
193 "PKHA divide-by-zero error.",
194 "PKHA modulus even error.",
195 "DES key parity error.",
196 "ICV check failed.",
197 "Hardware error.",
198 "Unsupported CCM AAD size.",
199 "Class 1 CHA is not reset",
200 "Invalid CHA combination was selected",
201 "Invalid CHA selected.",
202};
203
204static const char * const rng_err_id_list[] = {
205 "",
206 "",
207 "",
208 "Instantiate",
209 "Not instantiated",
210 "Test instantiate",
211 "Prediction resistance",
212 "Prediction resistance and test request",
213 "Uninstantiate",
214 "Secure key generation",
215 "",
216 "Hardware error",
217 "Continuous check"
218};
219
220static int report_ccb_status(struct device *jrdev, const u32 status,
221 const char *error)
222{
223 u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >>
224 JRSTA_CCBERR_CHAID_SHIFT;
225 u8 err_id = status & JRSTA_CCBERR_ERRID_MASK;
226 u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
227 JRSTA_DECOERR_INDEX_SHIFT;
228 char *idx_str;
229 const char *cha_str = "unidentified cha_id value 0x";
230 char cha_err_code[3] = { 0 };
231 const char *err_str = "unidentified err_id value 0x";
232 char err_err_code[3] = { 0 };
233
234 if (status & JRSTA_DECOERR_JUMP)
235 idx_str = "jump tgt desc idx";
236 else
237 idx_str = "desc idx";
238
239 if (cha_id < ARRAY_SIZE(cha_id_list))
240 cha_str = cha_id_list[cha_id];
241 else
242 snprintf(cha_err_code, sizeof(cha_err_code), "%02x", cha_id);
243
244 if ((cha_id << JRSTA_CCBERR_CHAID_SHIFT) == JRSTA_CCBERR_CHAID_RNG &&
245 err_id < ARRAY_SIZE(rng_err_id_list) &&
246 strlen(rng_err_id_list[err_id])) {
247 /* RNG-only error */
248 err_str = rng_err_id_list[err_id];
249 } else {
250 err_str = err_id_list[err_id];
251 }
252
253 /*
254 * CCB ICV check failures are part of normal operation life;
255 * we leave the upper layers to do what they want with them.
256 */
257 if (err_id == JRSTA_CCBERR_ERRID_ICVCHK)
258 return -EBADMSG;
259
260 dev_err_ratelimited(jrdev, "%08x: %s: %s %d: %s%s: %s%s\n", status,
261 error, idx_str, idx, cha_str, cha_err_code,
262 err_str, err_err_code);
263
264 return -EINVAL;
265}
266
267static int report_jump_status(struct device *jrdev, const u32 status,
268 const char *error)
269{
270 dev_err(jrdev, "%08x: %s: %s() not implemented\n",
271 status, error, __func__);
272
273 return -EINVAL;
274}
275
276static int report_deco_status(struct device *jrdev, const u32 status,
277 const char *error)
278{
279 u8 err_id = status & JRSTA_DECOERR_ERROR_MASK;
280 u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
281 JRSTA_DECOERR_INDEX_SHIFT;
282 char *idx_str;
283 const char *err_str = "unidentified error value 0x";
284 char err_err_code[3] = { 0 };
285 int i;
286
287 if (status & JRSTA_DECOERR_JUMP)
288 idx_str = "jump tgt desc idx";
289 else
290 idx_str = "desc idx";
291
292 for (i = 0; i < ARRAY_SIZE(desc_error_list); i++)
293 if (desc_error_list[i].value == err_id)
294 break;
295
296 if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text)
297 err_str = desc_error_list[i].error_text;
298 else
299 snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id);
300
301 dev_err(jrdev, "%08x: %s: %s %d: %s%s\n",
302 status, error, idx_str, idx, err_str, err_err_code);
303
304 return -EINVAL;
305}
306
307static int report_qi_status(struct device *qidev, const u32 status,
308 const char *error)
309{
310 u8 err_id = status & JRSTA_QIERR_ERROR_MASK;
311 const char *err_str = "unidentified error value 0x";
312 char err_err_code[3] = { 0 };
313 int i;
314
315 for (i = 0; i < ARRAY_SIZE(qi_error_list); i++)
316 if (qi_error_list[i].value == err_id)
317 break;
318
319 if (i != ARRAY_SIZE(qi_error_list) && qi_error_list[i].error_text)
320 err_str = qi_error_list[i].error_text;
321 else
322 snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id);
323
324 dev_err(qidev, "%08x: %s: %s%s\n",
325 status, error, err_str, err_err_code);
326
327 return -EINVAL;
328}
329
330static int report_jr_status(struct device *jrdev, const u32 status,
331 const char *error)
332{
333 dev_err(jrdev, "%08x: %s: %s() not implemented\n",
334 status, error, __func__);
335
336 return -EINVAL;
337}
338
339static int report_cond_code_status(struct device *jrdev, const u32 status,
340 const char *error)
341{
342 dev_err(jrdev, "%08x: %s: %s() not implemented\n",
343 status, error, __func__);
344
345 return -EINVAL;
346}
347
348int caam_strstatus(struct device *jrdev, u32 status, bool qi_v2)
349{
350 static const struct stat_src {
351 int (*report_ssed)(struct device *jrdev, const u32 status,
352 const char *error);
353 const char *error;
354 } status_src[16] = {
355 { NULL, "No error" },
356 { NULL, NULL },
357 { report_ccb_status, "CCB" },
358 { report_jump_status, "Jump" },
359 { report_deco_status, "DECO" },
360 { report_qi_status, "Queue Manager Interface" },
361 { report_jr_status, "Job Ring" },
362 { report_cond_code_status, "Condition Code" },
363 { NULL, NULL },
364 { NULL, NULL },
365 { NULL, NULL },
366 { NULL, NULL },
367 { NULL, NULL },
368 { NULL, NULL },
369 { NULL, NULL },
370 { NULL, NULL },
371 };
372 u32 ssrc = status >> JRSTA_SSRC_SHIFT;
373 const char *error = status_src[ssrc].error;
374
375 /*
376 * If there is an error handling function, call it to report the error.
377 * Otherwise print the error source name.
378 */
379 if (status_src[ssrc].report_ssed)
380 return status_src[ssrc].report_ssed(jrdev, status, error);
381
382 if (error)
383 dev_err(jrdev, "%d: %s\n", ssrc, error);
384 else
385 dev_err(jrdev, "%d: unknown error source\n", ssrc);
386
387 return -EINVAL;
388}
389EXPORT_SYMBOL(caam_strstatus);
390
391MODULE_LICENSE("GPL");
392MODULE_DESCRIPTION("FSL CAAM error reporting");
393MODULE_AUTHOR("Freescale Semiconductor");