| 1 | |
| 2 | |
| 3 | * GPIO driven matrix keyboard driver
|
| 4 | *
|
| 5 | * Copyright (c) 2008 Marek Vasut <[email protected]>
|
| 6 | *
|
| 7 | * Based on corgikbd.c
|
| 8 |
|
| 9 |
|
| 10 | #include <linux/types.h>
|
| 11 | #include <linux/delay.h>
|
| 12 | #include <linux/gpio/consumer.h>
|
| 13 | #include <linux/platform_device.h>
|
| 14 | #include <linux/input.h>
|
| 15 | #include <linux/irq.h>
|
| 16 | #include <linux/interrupt.h>
|
| 17 | #include <linux/jiffies.h>
|
| 18 | #include <linux/module.h>
|
| 19 | #include <linux/input/matrix_keypad.h>
|
| 20 | #include <linux/slab.h>
|
| 21 | #include <linux/of.h>
|
| 22 |
|
| 23 | struct matrix_keypad {
|
| 24 | struct input_dev *input_dev;
|
| 25 | unsigned int row_shift;
|
| 26 |
|
| 27 | unsigned int col_scan_delay_us;
|
| 28 | unsigned int all_cols_on_delay_us;
|
| 29 |
|
| 30 | unsigned int debounce_ms;
|
| 31 | bool drive_inactive_cols;
|
| 32 |
|
| 33 | struct gpio_desc *row_gpios[MATRIX_MAX_ROWS];
|
| 34 | unsigned int num_row_gpios;
|
| 35 |
|
| 36 | struct gpio_desc *col_gpios[MATRIX_MAX_ROWS];
|
| 37 | unsigned int num_col_gpios;
|
| 38 |
|
| 39 | unsigned int row_irqs[MATRIX_MAX_ROWS];
|
| 40 | DECLARE_BITMAP(wakeup_enabled_irqs, MATRIX_MAX_ROWS);
|
| 41 |
|
| 42 | uint32_t last_key_state[MATRIX_MAX_COLS];
|
| 43 | struct delayed_work work;
|
| 44 | spinlock_t lock;
|
| 45 | bool scan_pending;
|
| 46 | bool stopped;
|
| 47 | };
|
| 48 |
|
| 49 | |
| 50 | * NOTE: If drive_inactive_cols is false, then the GPIO has to be put into
|
| 51 | * HiZ when de-activated to cause minmal side effect when scanning other
|
| 52 | * columns. In that case it is configured here to be input, otherwise it is
|
| 53 | * driven with the inactive value.
|
| 54 |
|
| 55 | static void __activate_col(struct matrix_keypad *keypad, int col, bool on)
|
| 56 | {
|
| 57 | if (on) {
|
| 58 | gpiod_direction_output(keypad->col_gpios[col], 1);
|
| 59 | } else {
|
| 60 | gpiod_set_value_cansleep(keypad->col_gpios[col], 0);
|
| 61 | if (!keypad->drive_inactive_cols)
|
| 62 | gpiod_direction_input(keypad->col_gpios[col]);
|
| 63 | }
|
| 64 | }
|
| 65 |
|
| 66 | static void activate_col(struct matrix_keypad *keypad, int col, bool on)
|
| 67 | {
|
| 68 | __activate_col(keypad, col, on);
|
| 69 |
|
| 70 | if (on && keypad->col_scan_delay_us)
|
| 71 | fsleep(keypad->col_scan_delay_us);
|
| 72 | }
|
| 73 |
|
| 74 | static void activate_all_cols(struct matrix_keypad *keypad, bool on)
|
| 75 | {
|
| 76 | int col;
|
| 77 |
|
| 78 | for (col = 0; col < keypad->num_col_gpios; col++)
|
| 79 | __activate_col(keypad, col, on);
|
| 80 |
|
| 81 | if (on && keypad->all_cols_on_delay_us)
|
| 82 | fsleep(keypad->all_cols_on_delay_us);
|
| 83 | }
|
| 84 |
|
| 85 | static bool row_asserted(struct matrix_keypad *keypad, int row)
|
| 86 | {
|
| 87 | return gpiod_get_value_cansleep(keypad->row_gpios[row]);
|
| 88 | }
|
| 89 |
|
| 90 | static void enable_row_irqs(struct matrix_keypad *keypad)
|
| 91 | {
|
| 92 | int i;
|
| 93 |
|
| 94 | for (i = 0; i < keypad->num_row_gpios; i++)
|
| 95 | enable_irq(keypad->row_irqs[i]);
|
| 96 | }
|
| 97 |
|
| 98 | static void disable_row_irqs(struct matrix_keypad *keypad)
|
| 99 | {
|
| 100 | int i;
|
| 101 |
|
| 102 | for (i = 0; i < keypad->num_row_gpios; i++)
|
| 103 | disable_irq_nosync(keypad->row_irqs[i]);
|
| 104 | }
|
| 105 |
|
| 106 | static uint32_t read_row_state(struct matrix_keypad *keypad)
|
| 107 | {
|
| 108 | int row;
|
| 109 | u32 row_state = 0;
|
| 110 |
|
| 111 | for (row = 0; row < keypad->num_row_gpios; row++)
|
| 112 | row_state |= row_asserted(keypad, row) ? BIT(row) : 0;
|
| 113 | return row_state;
|
| 114 | }
|
| 115 |
|
| 116 | |
| 117 | * This gets the keys from keyboard and reports it to input subsystem
|
| 118 |
|
| 119 | static void matrix_keypad_scan(struct work_struct *work)
|
| 120 | {
|
| 121 | struct matrix_keypad *keypad =
|
| 122 | container_of(work, struct matrix_keypad, work.work);
|
| 123 | struct input_dev *input_dev = keypad->input_dev;
|
| 124 | const unsigned short *keycodes = input_dev->keycode;
|
| 125 | uint32_t new_state[MATRIX_MAX_COLS];
|
| 126 | int row, col, code;
|
| 127 | u32 init_row_state, new_row_state;
|
| 128 |
|
| 129 |
|
| 130 | init_row_state = read_row_state(keypad);
|
| 131 |
|
| 132 |
|
| 133 | activate_all_cols(keypad, false);
|
| 134 |
|
| 135 | memset(new_state, 0, sizeof(new_state));
|
| 136 |
|
| 137 | for (row = 0; row < keypad->num_row_gpios; row++)
|
| 138 | gpiod_direction_input(keypad->row_gpios[row]);
|
| 139 |
|
| 140 |
|
| 141 | for (col = 0; col < keypad->num_col_gpios; col++) {
|
| 142 |
|
| 143 | activate_col(keypad, col, true);
|
| 144 |
|
| 145 | new_state[col] = read_row_state(keypad);
|
| 146 |
|
| 147 | activate_col(keypad, col, false);
|
| 148 | }
|
| 149 |
|
| 150 | for (col = 0; col < keypad->num_col_gpios; col++) {
|
| 151 | uint32_t bits_changed;
|
| 152 |
|
| 153 | bits_changed = keypad->last_key_state[col] ^ new_state[col];
|
| 154 | if (bits_changed == 0)
|
| 155 | continue;
|
| 156 |
|
| 157 | for (row = 0; row < keypad->num_row_gpios; row++) {
|
| 158 | if (!(bits_changed & BIT(row)))
|
| 159 | continue;
|
| 160 |
|
| 161 | code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
|
| 162 | input_event(input_dev, EV_MSC, MSC_SCAN, code);
|
| 163 | input_report_key(input_dev,
|
| 164 | keycodes[code],
|
| 165 | new_state[col] & (1 << row));
|
| 166 | }
|
| 167 | }
|
| 168 | input_sync(input_dev);
|
| 169 |
|
| 170 | memcpy(keypad->last_key_state, new_state, sizeof(new_state));
|
| 171 |
|
| 172 | activate_all_cols(keypad, true);
|
| 173 |
|
| 174 |
|
| 175 | scoped_guard(spinlock_irq, &keypad->lock) {
|
| 176 | keypad->scan_pending = false;
|
| 177 | enable_row_irqs(keypad);
|
| 178 | }
|
| 179 |
|
| 180 |
|
| 181 | new_row_state = read_row_state(keypad);
|
| 182 | if (init_row_state != new_row_state) {
|
| 183 | guard(spinlock_irq)(&keypad->lock);
|
| 184 | if (unlikely(keypad->scan_pending || keypad->stopped))
|
| 185 | return;
|
| 186 | disable_row_irqs(keypad);
|
| 187 | keypad->scan_pending = true;
|
| 188 | schedule_delayed_work(&keypad->work,
|
| 189 | msecs_to_jiffies(keypad->debounce_ms));
|
| 190 | }
|
| 191 | }
|
| 192 |
|
| 193 | static irqreturn_t matrix_keypad_interrupt(int irq, void *id)
|
| 194 | {
|
| 195 | struct matrix_keypad *keypad = id;
|
| 196 |
|
| 197 | guard(spinlock_irqsave)(&keypad->lock);
|
| 198 |
|
| 199 | |
| 200 | * See if another IRQ beaten us to it and scheduled the
|
| 201 | * scan already. In that case we should not try to
|
| 202 | * disable IRQs again.
|
| 203 |
|
| 204 | if (unlikely(keypad->scan_pending || keypad->stopped))
|
| 205 | goto out;
|
| 206 |
|
| 207 | disable_row_irqs(keypad);
|
| 208 | keypad->scan_pending = true;
|
| 209 | schedule_delayed_work(&keypad->work,
|
| 210 | msecs_to_jiffies(keypad->debounce_ms));
|
| 211 |
|
| 212 | out:
|
| 213 | return IRQ_HANDLED;
|
| 214 | }
|
| 215 |
|
| 216 | static int matrix_keypad_start(struct input_dev *dev)
|
| 217 | {
|
| 218 | struct matrix_keypad *keypad = input_get_drvdata(dev);
|
| 219 |
|
| 220 | keypad->stopped = false;
|
| 221 | mb();
|
| 222 |
|
| 223 | |
| 224 | * Schedule an immediate key scan to capture current key state;
|
| 225 | * columns will be activated and IRQs be enabled after the scan.
|
| 226 |
|
| 227 | schedule_delayed_work(&keypad->work, 0);
|
| 228 |
|
| 229 | return 0;
|
| 230 | }
|
| 231 |
|
| 232 | static void matrix_keypad_stop(struct input_dev *dev)
|
| 233 | {
|
| 234 | struct matrix_keypad *keypad = input_get_drvdata(dev);
|
| 235 |
|
| 236 | scoped_guard(spinlock_irq, &keypad->lock) {
|
| 237 | keypad->stopped = true;
|
| 238 | }
|
| 239 |
|
| 240 | flush_delayed_work(&keypad->work);
|
| 241 | |
| 242 | * matrix_keypad_scan() will leave IRQs enabled;
|
| 243 | * we should disable them now.
|
| 244 |
|
| 245 | disable_row_irqs(keypad);
|
| 246 | }
|
| 247 |
|
| 248 | static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
|
| 249 | {
|
| 250 | int i;
|
| 251 |
|
| 252 | for_each_clear_bit(i, keypad->wakeup_enabled_irqs,
|
| 253 | keypad->num_row_gpios)
|
| 254 | if (enable_irq_wake(keypad->row_irqs[i]) == 0)
|
| 255 | __set_bit(i, keypad->wakeup_enabled_irqs);
|
| 256 | }
|
| 257 |
|
| 258 | static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad)
|
| 259 | {
|
| 260 | int i;
|
| 261 |
|
| 262 | for_each_set_bit(i, keypad->wakeup_enabled_irqs,
|
| 263 | keypad->num_row_gpios) {
|
| 264 | disable_irq_wake(keypad->row_irqs[i]);
|
| 265 | __clear_bit(i, keypad->wakeup_enabled_irqs);
|
| 266 | }
|
| 267 | }
|
| 268 |
|
| 269 | static int matrix_keypad_suspend(struct device *dev)
|
| 270 | {
|
| 271 | struct platform_device *pdev = to_platform_device(dev);
|
| 272 | struct matrix_keypad *keypad = platform_get_drvdata(pdev);
|
| 273 |
|
| 274 | matrix_keypad_stop(keypad->input_dev);
|
| 275 |
|
| 276 | if (device_may_wakeup(&pdev->dev))
|
| 277 | matrix_keypad_enable_wakeup(keypad);
|
| 278 |
|
| 279 | return 0;
|
| 280 | }
|
| 281 |
|
| 282 | static int matrix_keypad_resume(struct device *dev)
|
| 283 | {
|
| 284 | struct platform_device *pdev = to_platform_device(dev);
|
| 285 | struct matrix_keypad *keypad = platform_get_drvdata(pdev);
|
| 286 |
|
| 287 | if (device_may_wakeup(&pdev->dev))
|
| 288 | matrix_keypad_disable_wakeup(keypad);
|
| 289 |
|
| 290 | matrix_keypad_start(keypad->input_dev);
|
| 291 |
|
| 292 | return 0;
|
| 293 | }
|
| 294 |
|
| 295 | static DEFINE_SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
|
| 296 | matrix_keypad_suspend, matrix_keypad_resume);
|
| 297 |
|
| 298 | static int matrix_keypad_init_gpio(struct platform_device *pdev,
|
| 299 | struct matrix_keypad *keypad)
|
| 300 | {
|
| 301 | bool active_low;
|
| 302 | int nrow, ncol;
|
| 303 | int err;
|
| 304 | int i;
|
| 305 |
|
| 306 | nrow = gpiod_count(&pdev->dev, "row");
|
| 307 | ncol = gpiod_count(&pdev->dev, "col");
|
| 308 | if (nrow < 0 || ncol < 0) {
|
| 309 | dev_err(&pdev->dev, "missing row or column GPIOs\n");
|
| 310 | return -EINVAL;
|
| 311 | }
|
| 312 |
|
| 313 | keypad->num_row_gpios = nrow;
|
| 314 | keypad->num_col_gpios = ncol;
|
| 315 |
|
| 316 | active_low = device_property_read_bool(&pdev->dev, "gpio-activelow");
|
| 317 |
|
| 318 |
|
| 319 | for (i = 0; i < keypad->num_col_gpios; i++) {
|
| 320 | keypad->col_gpios[i] = devm_gpiod_get_index(&pdev->dev, "col",
|
| 321 | i, GPIOD_ASIS);
|
| 322 | err = PTR_ERR_OR_ZERO(keypad->col_gpios[i]);
|
| 323 | if (err) {
|
| 324 | dev_err(&pdev->dev,
|
| 325 | "failed to request GPIO for COL%d: %d\n",
|
| 326 | i, err);
|
| 327 | return err;
|
| 328 | }
|
| 329 |
|
| 330 | gpiod_set_consumer_name(keypad->col_gpios[i], "matrix_kbd_col");
|
| 331 |
|
| 332 | if (active_low ^ gpiod_is_active_low(keypad->col_gpios[i]))
|
| 333 | gpiod_toggle_active_low(keypad->col_gpios[i]);
|
| 334 |
|
| 335 | gpiod_direction_output(keypad->col_gpios[i], 1);
|
| 336 | }
|
| 337 |
|
| 338 | for (i = 0; i < keypad->num_row_gpios; i++) {
|
| 339 | keypad->row_gpios[i] = devm_gpiod_get_index(&pdev->dev, "row",
|
| 340 | i, GPIOD_IN);
|
| 341 | err = PTR_ERR_OR_ZERO(keypad->row_gpios[i]);
|
| 342 | if (err) {
|
| 343 | dev_err(&pdev->dev,
|
| 344 | "failed to request GPIO for ROW%d: %d\n",
|
| 345 | i, err);
|
| 346 | return err;
|
| 347 | }
|
| 348 |
|
| 349 | gpiod_set_consumer_name(keypad->row_gpios[i], "matrix_kbd_row");
|
| 350 |
|
| 351 | if (active_low ^ gpiod_is_active_low(keypad->row_gpios[i]))
|
| 352 | gpiod_toggle_active_low(keypad->row_gpios[i]);
|
| 353 | }
|
| 354 |
|
| 355 | return 0;
|
| 356 | }
|
| 357 |
|
| 358 | static int matrix_keypad_setup_interrupts(struct platform_device *pdev,
|
| 359 | struct matrix_keypad *keypad)
|
| 360 | {
|
| 361 | int err;
|
| 362 | int irq;
|
| 363 | int i;
|
| 364 |
|
| 365 | for (i = 0; i < keypad->num_row_gpios; i++) {
|
| 366 | irq = gpiod_to_irq(keypad->row_gpios[i]);
|
| 367 | if (irq < 0) {
|
| 368 | err = irq;
|
| 369 | dev_err(&pdev->dev,
|
| 370 | "Unable to convert GPIO line %i to irq: %d\n",
|
| 371 | i, err);
|
| 372 | return err;
|
| 373 | }
|
| 374 |
|
| 375 | err = devm_request_any_context_irq(&pdev->dev, irq,
|
| 376 | matrix_keypad_interrupt,
|
| 377 | IRQF_TRIGGER_RISING |
|
| 378 | IRQF_TRIGGER_FALLING,
|
| 379 | "matrix-keypad", keypad);
|
| 380 | if (err < 0) {
|
| 381 | dev_err(&pdev->dev,
|
| 382 | "Unable to acquire interrupt for row %i: %d\n",
|
| 383 | i, err);
|
| 384 | return err;
|
| 385 | }
|
| 386 |
|
| 387 | keypad->row_irqs[i] = irq;
|
| 388 | }
|
| 389 |
|
| 390 |
|
| 391 | disable_row_irqs(keypad);
|
| 392 |
|
| 393 | return 0;
|
| 394 | }
|
| 395 |
|
| 396 | static int matrix_keypad_probe(struct platform_device *pdev)
|
| 397 | {
|
| 398 | struct matrix_keypad *keypad;
|
| 399 | struct input_dev *input_dev;
|
| 400 | bool wakeup;
|
| 401 | int err;
|
| 402 |
|
| 403 | keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
|
| 404 | if (!keypad)
|
| 405 | return -ENOMEM;
|
| 406 |
|
| 407 | input_dev = devm_input_allocate_device(&pdev->dev);
|
| 408 | if (!input_dev)
|
| 409 | return -ENOMEM;
|
| 410 |
|
| 411 | keypad->input_dev = input_dev;
|
| 412 | keypad->stopped = true;
|
| 413 | INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
|
| 414 | spin_lock_init(&keypad->lock);
|
| 415 |
|
| 416 | keypad->drive_inactive_cols =
|
| 417 | device_property_read_bool(&pdev->dev, "drive-inactive-cols");
|
| 418 | device_property_read_u32(&pdev->dev, "debounce-delay-ms",
|
| 419 | &keypad->debounce_ms);
|
| 420 | device_property_read_u32(&pdev->dev, "col-scan-delay-us",
|
| 421 | &keypad->col_scan_delay_us);
|
| 422 | device_property_read_u32(&pdev->dev, "all-cols-on-delay-us",
|
| 423 | &keypad->all_cols_on_delay_us);
|
| 424 |
|
| 425 | err = matrix_keypad_init_gpio(pdev, keypad);
|
| 426 | if (err)
|
| 427 | return err;
|
| 428 |
|
| 429 | keypad->row_shift = get_count_order(keypad->num_col_gpios);
|
| 430 |
|
| 431 | err = matrix_keypad_setup_interrupts(pdev, keypad);
|
| 432 | if (err)
|
| 433 | return err;
|
| 434 |
|
| 435 | input_dev->name = pdev->name;
|
| 436 | input_dev->id.bustype = BUS_HOST;
|
| 437 | input_dev->open = matrix_keypad_start;
|
| 438 | input_dev->close = matrix_keypad_stop;
|
| 439 |
|
| 440 | err = matrix_keypad_build_keymap(NULL, NULL,
|
| 441 | keypad->num_row_gpios,
|
| 442 | keypad->num_col_gpios,
|
| 443 | NULL, input_dev);
|
| 444 | if (err) {
|
| 445 | dev_err(&pdev->dev, "failed to build keymap\n");
|
| 446 | return -ENOMEM;
|
| 447 | }
|
| 448 |
|
| 449 | if (!device_property_read_bool(&pdev->dev, "linux,no-autorepeat"))
|
| 450 | __set_bit(EV_REP, input_dev->evbit);
|
| 451 |
|
| 452 | input_set_capability(input_dev, EV_MSC, MSC_SCAN);
|
| 453 | input_set_drvdata(input_dev, keypad);
|
| 454 |
|
| 455 | err = input_register_device(keypad->input_dev);
|
| 456 | if (err)
|
| 457 | return err;
|
| 458 |
|
| 459 | wakeup = device_property_read_bool(&pdev->dev, "wakeup-source") ||
|
| 460 |
|
| 461 | device_property_read_bool(&pdev->dev, "linux,wakeup");
|
| 462 | device_init_wakeup(&pdev->dev, wakeup);
|
| 463 |
|
| 464 | platform_set_drvdata(pdev, keypad);
|
| 465 |
|
| 466 | return 0;
|
| 467 | }
|
| 468 |
|
| 469 | #ifdef CONFIG_OF
|
| 470 | static const struct of_device_id matrix_keypad_dt_match[] = {
|
| 471 | { .compatible = "gpio-matrix-keypad" },
|
| 472 | { }
|
| 473 | };
|
| 474 | MODULE_DEVICE_TABLE(of, matrix_keypad_dt_match);
|
| 475 | #endif
|
| 476 |
|
| 477 | static struct platform_driver matrix_keypad_driver = {
|
| 478 | .probe = matrix_keypad_probe,
|
| 479 | .driver = {
|
| 480 | .name = "matrix-keypad",
|
| 481 | .pm = pm_sleep_ptr(&matrix_keypad_pm_ops),
|
| 482 | .of_match_table = of_match_ptr(matrix_keypad_dt_match),
|
| 483 | },
|
| 484 | };
|
| 485 | module_platform_driver(matrix_keypad_driver);
|
| 486 |
|
| 487 | MODULE_AUTHOR("Marek Vasut <[email protected]>");
|
| 488 | MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver");
|
| 489 | MODULE_LICENSE("GPL v2");
|
| 490 | MODULE_ALIAS("platform:matrix-keypad");
|