| 1 | # SPDX-License-Identifier: GPL-2.0-only |
| 2 | menuconfig REGULATOR |
| 3 | bool "Voltage and Current Regulator Support" |
| 4 | select LINEAR_RANGES |
| 5 | help |
| 6 | Generic Voltage and Current Regulator support. |
| 7 | |
| 8 | This framework is designed to provide a generic interface to voltage |
| 9 | and current regulators within the Linux kernel. It's intended to |
| 10 | provide voltage and current control to client or consumer drivers and |
| 11 | also provide status information to user space applications through a |
| 12 | sysfs interface. |
| 13 | |
| 14 | The intention is to allow systems to dynamically control regulator |
| 15 | output in order to save power and prolong battery life. This applies |
| 16 | to both voltage regulators (where voltage output is controllable) and |
| 17 | current sinks (where current output is controllable). |
| 18 | |
| 19 | This framework safely compiles out if not selected so that client |
| 20 | drivers can still be used in systems with no software controllable |
| 21 | regulators. |
| 22 | |
| 23 | If unsure, say no. |
| 24 | |
| 25 | |
| 26 | if REGULATOR |
| 27 | |
| 28 | config REGULATOR_DEBUG |
| 29 | bool "Regulator debug support" |
| 30 | help |
| 31 | Say yes here to enable debugging support. |
| 32 | |
| 33 | config REGULATOR_FIXED_VOLTAGE |
| 34 | tristate "Fixed voltage regulator support" |
| 35 | help |
| 36 | This driver provides support for fixed voltage regulators, |
| 37 | useful for systems which use a combination of software |
| 38 | managed regulators and simple non-configurable regulators. |
| 39 | |
| 40 | config REGULATOR_VIRTUAL_CONSUMER |
| 41 | tristate "Virtual regulator consumer support" |
| 42 | help |
| 43 | This driver provides a virtual consumer for the voltage and |
| 44 | current regulator API which provides sysfs controls for |
| 45 | configuring the supplies requested. This is mainly useful |
| 46 | for test purposes. |
| 47 | |
| 48 | If unsure, say no. |
| 49 | |
| 50 | config REGULATOR_USERSPACE_CONSUMER |
| 51 | tristate "Userspace regulator consumer support" |
| 52 | help |
| 53 | There are some classes of devices that are controlled entirely |
| 54 | from user space. Userspace consumer driver provides ability to |
| 55 | control power supplies for such devices. |
| 56 | |
| 57 | If unsure, say no. |
| 58 | |
| 59 | config REGULATOR_NETLINK_EVENTS |
| 60 | bool "Enable support for receiving regulator events via netlink" |
| 61 | depends on NET |
| 62 | help |
| 63 | Enabling this option allows the kernel to broadcast regulator events using |
| 64 | the netlink mechanism. User-space applications can subscribe to these events |
| 65 | for real-time updates on various regulator events. |
| 66 | |
| 67 | If unsure, say no. |
| 68 | |
| 69 | config REGULATOR_88PG86X |
| 70 | tristate "Marvell 88PG86X voltage regulators" |
| 71 | depends on I2C |
| 72 | select REGMAP_I2C |
| 73 | help |
| 74 | This driver supports Marvell 88PG867 and 88PG868 voltage regulators. |
| 75 | They provide two I2C-controlled DC/DC step-down converters with |
| 76 | sleep mode and separate enable pins. |
| 77 | |
| 78 | config REGULATOR_88PM800 |
| 79 | tristate "Marvell 88PM800 Power regulators" |
| 80 | depends on MFD_88PM800 |
| 81 | help |
| 82 | This driver supports Marvell 88PM800 voltage regulator chips. |
| 83 | It delivers digitally programmable output, |
| 84 | the voltage is programmed via I2C interface. |
| 85 | It's suitable to support PXA988 chips to control VCC_MAIN and |
| 86 | various voltages. |
| 87 | |
| 88 | config REGULATOR_88PM8607 |
| 89 | tristate "Marvell 88PM8607 Power regulators" |
| 90 | depends on MFD_88PM860X=y |
| 91 | help |
| 92 | This driver supports 88PM8607 voltage regulator chips. |
| 93 | |
| 94 | config REGULATOR_88PM886 |
| 95 | tristate "Marvell 88PM886 voltage regulators" |
| 96 | depends on MFD_88PM886_PMIC |
| 97 | help |
| 98 | This driver implements support for Marvell 88PM886 voltage regulators. |
| 99 | |
| 100 | config REGULATOR_ACT8865 |
| 101 | tristate "Active-semi act8865 voltage regulator" |
| 102 | depends on I2C |
| 103 | depends on POWER_SUPPLY |
| 104 | select REGMAP_I2C |
| 105 | help |
| 106 | This driver controls a active-semi act8865 voltage output |
| 107 | regulator via I2C bus. |
| 108 | |
| 109 | config REGULATOR_ACT8945A |
| 110 | tristate "Active-semi ACT8945A voltage regulator" |
| 111 | depends on MFD_ACT8945A |
| 112 | help |
| 113 | This driver controls a active-semi ACT8945A voltage regulator |
| 114 | via I2C bus. The ACT8945A features three step-down DC/DC converters |
| 115 | and four low-dropout linear regulators, along with a ActivePath |
| 116 | battery charger. |
| 117 | |
| 118 | config REGULATOR_AD5398 |
| 119 | tristate "Analog Devices AD5398/AD5821 regulators" |
| 120 | depends on I2C |
| 121 | help |
| 122 | This driver supports AD5398 and AD5821 current regulator chips. |
| 123 | If building into module, its name is ad5398.ko. |
| 124 | |
| 125 | config REGULATOR_ADP5055 |
| 126 | tristate "Analog Devices ADP5055 Triple Buck Regulator" |
| 127 | depends on I2C |
| 128 | select REGMAP_I2C |
| 129 | help |
| 130 | This driver controls an Analog Devices ADP5055 with triple buck |
| 131 | regulators using an I2C interface. |
| 132 | |
| 133 | Say M here if you want to include support for the regulator as a |
| 134 | module. |
| 135 | |
| 136 | config REGULATOR_ANATOP |
| 137 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" |
| 138 | depends on ARCH_MXC || COMPILE_TEST |
| 139 | depends on MFD_SYSCON |
| 140 | help |
| 141 | Say y here to support Freescale i.MX on-chip ANATOP LDOs |
| 142 | regulators. It is recommended that this option be |
| 143 | enabled on i.MX6 platform. |
| 144 | |
| 145 | config REGULATOR_AAT2870 |
| 146 | tristate "AnalogicTech AAT2870 Regulators" |
| 147 | depends on MFD_AAT2870_CORE |
| 148 | help |
| 149 | If you have a AnalogicTech AAT2870 say Y to enable the |
| 150 | regulator driver. |
| 151 | |
| 152 | config REGULATOR_AB8500 |
| 153 | bool "ST-Ericsson AB8500 Power Regulators" |
| 154 | depends on AB8500_CORE |
| 155 | help |
| 156 | This driver supports the regulators found on the ST-Ericsson mixed |
| 157 | signal AB8500 PMIC |
| 158 | |
| 159 | config REGULATOR_ARIZONA_LDO1 |
| 160 | tristate "Cirrus Madera and Wolfson Arizona class devices LDO1" |
| 161 | depends on MFD_ARIZONA || MFD_MADERA |
| 162 | depends on SND_SOC |
| 163 | help |
| 164 | Support for the LDO1 regulators found on Cirrus Logic Madera codecs |
| 165 | and Wolfson Microelectronic Arizona codecs. |
| 166 | |
| 167 | config REGULATOR_ARIZONA_MICSUPP |
| 168 | tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP" |
| 169 | depends on MFD_ARIZONA || MFD_MADERA |
| 170 | depends on SND_SOC |
| 171 | help |
| 172 | Support for the MICSUPP regulators found on Cirrus Logic Madera codecs |
| 173 | and Wolfson Microelectronic Arizona codecs |
| 174 | devices. |
| 175 | |
| 176 | config REGULATOR_ARM_SCMI |
| 177 | tristate "SCMI based regulator driver" |
| 178 | depends on ARM_SCMI_PROTOCOL && OF |
| 179 | help |
| 180 | This adds the regulator driver support for ARM platforms using SCMI |
| 181 | protocol for device voltage management. |
| 182 | This driver uses SCMI Message Protocol driver to interact with the |
| 183 | firmware providing the device Voltage functionality. |
| 184 | |
| 185 | config REGULATOR_AS3711 |
| 186 | tristate "AS3711 PMIC" |
| 187 | depends on MFD_AS3711 |
| 188 | help |
| 189 | This driver provides support for the voltage regulators on the |
| 190 | AS3711 PMIC |
| 191 | |
| 192 | config REGULATOR_AS3722 |
| 193 | tristate "AMS AS3722 PMIC Regulators" |
| 194 | depends on MFD_AS3722 |
| 195 | help |
| 196 | This driver provides support for the voltage regulators on the |
| 197 | AS3722 PMIC. This will enable support for all the software |
| 198 | controllable DCDC/LDO regulators. |
| 199 | |
| 200 | config REGULATOR_ATC260X |
| 201 | tristate "Actions Semi ATC260x PMIC Regulators" |
| 202 | depends on MFD_ATC260X |
| 203 | help |
| 204 | This driver provides support for the voltage regulators on the |
| 205 | ATC260x PMICs. This will enable support for all the software |
| 206 | controllable DCDC/LDO regulators. |
| 207 | |
| 208 | config REGULATOR_AW37503 |
| 209 | tristate "Awinic AW37503 Dual Output Power regulators" |
| 210 | depends on I2C && GPIOLIB |
| 211 | select REGMAP_I2C |
| 212 | help |
| 213 | This driver supports AW37503 single inductor - dual output |
| 214 | power supply specifically designed for display panels. |
| 215 | |
| 216 | config REGULATOR_AXP20X |
| 217 | tristate "X-POWERS AXP20X PMIC Regulators" |
| 218 | depends on MFD_AXP20X |
| 219 | help |
| 220 | This driver provides support for the voltage regulators on the |
| 221 | AXP20X PMIC. |
| 222 | |
| 223 | config REGULATOR_BCM590XX |
| 224 | tristate "Broadcom BCM590xx PMU Regulators" |
| 225 | depends on MFD_BCM590XX |
| 226 | help |
| 227 | This driver provides support for the voltage regulators on the |
| 228 | BCM590xx PMUs. This will enable support for the software |
| 229 | controllable LDO/Switching regulators. |
| 230 | |
| 231 | config REGULATOR_BD71815 |
| 232 | tristate "ROHM BD71815 Power Regulator" |
| 233 | depends on MFD_ROHM_BD71828 |
| 234 | select REGULATOR_ROHM |
| 235 | help |
| 236 | This driver supports voltage regulators on ROHM BD71815 PMIC. |
| 237 | This will enable support for the software controllable buck |
| 238 | and LDO regulators and a current regulator for LEDs. |
| 239 | |
| 240 | This driver can also be built as a module. If so, the module |
| 241 | will be called bd71815-regulator. |
| 242 | |
| 243 | config REGULATOR_BD71828 |
| 244 | tristate "ROHM BD71828, BD72720 and BD73900 Power Regulators" |
| 245 | depends on MFD_ROHM_BD71828 |
| 246 | select REGULATOR_ROHM |
| 247 | help |
| 248 | This driver supports voltage regulators on ROHM BD71828, |
| 249 | BD71879, BD72720 and BD73900 PMICs. This will enable |
| 250 | support for the software controllable buck and LDO regulators. |
| 251 | |
| 252 | This driver can also be built as a module. If so, the module |
| 253 | will be called bd71828-regulator. |
| 254 | |
| 255 | config REGULATOR_BD718XX |
| 256 | tristate "ROHM BD71837 Power Regulator" |
| 257 | depends on MFD_ROHM_BD718XX |
| 258 | select REGULATOR_ROHM |
| 259 | help |
| 260 | This driver supports voltage regulators on ROHM BD71837 PMIC. |
| 261 | This will enable support for the software controllable buck |
| 262 | and LDO regulators. |
| 263 | |
| 264 | This driver can also be built as a module. If so, the module |
| 265 | will be called bd718x7-regulator. |
| 266 | |
| 267 | config REGULATOR_BD9571MWV |
| 268 | tristate "ROHM BD9571MWV Regulators" |
| 269 | depends on MFD_BD9571MWV |
| 270 | help |
| 271 | This driver provides support for the voltage regulators on the |
| 272 | ROHM BD9571MWV PMIC. This will enable support for the software |
| 273 | controllable regulator and voltage sampling units. |
| 274 | |
| 275 | This driver can also be built as a module. If so, the module |
| 276 | will be called bd9571mwv-regulator. |
| 277 | |
| 278 | config REGULATOR_BD957XMUF |
| 279 | tristate "ROHM BD9576MUF and BD9573MUF Regulators" |
| 280 | depends on MFD_ROHM_BD957XMUF |
| 281 | help |
| 282 | This driver supports voltage regulators on ROHM BD9576MUF and |
| 283 | BD9573MUF PMICs. |
| 284 | |
| 285 | This driver can also be built as a module. If so, the module |
| 286 | will be called bd9576-regulator. |
| 287 | |
| 288 | config REGULATOR_BD96801 |
| 289 | tristate "ROHM BD96801 Power Regulator" |
| 290 | depends on MFD_ROHM_BD96801 |
| 291 | select REGULATOR_ROHM |
| 292 | help |
| 293 | This driver supports voltage regulators on ROHM BD96801 PMIC. |
| 294 | This will enable support for the software controllable buck |
| 295 | and LDO regulators. |
| 296 | |
| 297 | This driver can also be built as a module. If so, the module |
| 298 | will be called bd96801-regulator. |
| 299 | |
| 300 | config REGULATOR_BQ257XX |
| 301 | tristate "TI BQ257XX regulator family" |
| 302 | depends on MFD_BQ257XX |
| 303 | depends on GPIOLIB || COMPILE_TEST |
| 304 | help |
| 305 | Say Y to enable support for the boost regulator function of |
| 306 | the BQ257XX family of charger circuits. |
| 307 | |
| 308 | config REGULATOR_CPCAP |
| 309 | tristate "Motorola CPCAP regulator" |
| 310 | depends on MFD_CPCAP |
| 311 | help |
| 312 | Say y here for CPCAP regulator found on some Motorola phones |
| 313 | and tablets such as Droid 4. |
| 314 | |
| 315 | config REGULATOR_CROS_EC |
| 316 | tristate "ChromeOS EC regulators" |
| 317 | depends on CROS_EC && OF |
| 318 | help |
| 319 | This driver supports voltage regulators that is connected to ChromeOS |
| 320 | EC and controlled through EC host commands. |
| 321 | |
| 322 | This driver can also be built as a module. If so, the module |
| 323 | will be called cros-ec-regulator. |
| 324 | |
| 325 | config REGULATOR_DA903X |
| 326 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" |
| 327 | depends on PMIC_DA903X |
| 328 | depends on !CC_IS_CLANG # https://llvm.org/pr38789 |
| 329 | help |
| 330 | Say y here to support the BUCKs and LDOs regulators found on |
| 331 | Dialog Semiconductor DA9030/DA9034 PMIC. |
| 332 | |
| 333 | config REGULATOR_DA9052 |
| 334 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" |
| 335 | depends on PMIC_DA9052 |
| 336 | help |
| 337 | This driver supports the voltage regulators of DA9052-BC and |
| 338 | DA9053-AA/Bx PMIC. |
| 339 | |
| 340 | config REGULATOR_DA9055 |
| 341 | tristate "Dialog Semiconductor DA9055 regulators" |
| 342 | depends on MFD_DA9055 |
| 343 | help |
| 344 | Say y here to support the BUCKs and LDOs regulators found on |
| 345 | Dialog Semiconductor DA9055 PMIC. |
| 346 | |
| 347 | This driver can also be built as a module. If so, the module |
| 348 | will be called da9055-regulator. |
| 349 | |
| 350 | config REGULATOR_DA9062 |
| 351 | tristate "Dialog Semiconductor DA9061/62 regulators" |
| 352 | depends on MFD_DA9062 |
| 353 | help |
| 354 | Say y here to support the BUCKs and LDOs regulators found on |
| 355 | DA9061 and DA9062 PMICs. |
| 356 | |
| 357 | This driver can also be built as a module. If so, the module |
| 358 | will be called da9062-regulator. |
| 359 | |
| 360 | config REGULATOR_DA9063 |
| 361 | tristate "Dialog Semiconductor DA9063 regulators" |
| 362 | depends on MFD_DA9063 && OF |
| 363 | help |
| 364 | Say y here to support the BUCKs and LDOs regulators found on |
| 365 | DA9063 PMICs. |
| 366 | |
| 367 | This driver can also be built as a module. If so, the module |
| 368 | will be called da9063-regulator. |
| 369 | |
| 370 | config REGULATOR_DA9121 |
| 371 | tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator" |
| 372 | depends on I2C && OF |
| 373 | select REGMAP_I2C |
| 374 | help |
| 375 | Say y here to support for the Dialog Semiconductor DA9121. The |
| 376 | DA9121 is a single channel dual-phase buck converter controlled |
| 377 | through an I2C interface. |
| 378 | |
| 379 | DA9121 Single-channel dual-phase 10A buck converter |
| 380 | DA9130 Single-channel dual-phase 10A buck converter (Automotive) |
| 381 | DA9217 Single-channel dual-phase 6A buck converter |
| 382 | DA9122 Dual-channel single-phase 5A buck converter |
| 383 | DA9131 Dual-channel single-phase 5A buck converter (Automotive) |
| 384 | DA9220 Dual-channel single-phase 3A buck converter |
| 385 | DA9132 Dual-channel single-phase 3A buck converter (Automotive) |
| 386 | |
| 387 | This driver can also be built as a module. If so, the module |
| 388 | will be called da9121-regulator. |
| 389 | |
| 390 | config REGULATOR_DA9210 |
| 391 | tristate "Dialog Semiconductor DA9210 regulator" |
| 392 | depends on I2C |
| 393 | select REGMAP_I2C |
| 394 | help |
| 395 | Say y here to support for the Dialog Semiconductor DA9210. |
| 396 | The DA9210 is a multi-phase synchronous step down |
| 397 | converter 12A DC-DC Buck controlled through an I2C |
| 398 | interface. |
| 399 | |
| 400 | config REGULATOR_DA9211 |
| 401 | tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator" |
| 402 | depends on I2C |
| 403 | select REGMAP_I2C |
| 404 | help |
| 405 | Say y here to support for the Dialog Semiconductor DA9211/DA9212 |
| 406 | /DA9213/DA9214/DA9215. |
| 407 | The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous |
| 408 | step down converter 12A or 16A DC-DC Buck controlled through an I2C |
| 409 | interface. |
| 410 | |
| 411 | config REGULATOR_DBX500_PRCMU |
| 412 | bool |
| 413 | |
| 414 | config REGULATOR_DB8500_PRCMU |
| 415 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" |
| 416 | depends on MFD_DB8500_PRCMU |
| 417 | select REGULATOR_DBX500_PRCMU |
| 418 | help |
| 419 | This driver supports the voltage domain regulators controlled by the |
| 420 | DB8500 PRCMU |
| 421 | |
| 422 | config REGULATOR_FAN53555 |
| 423 | tristate "Fairchild FAN53555 Regulator" |
| 424 | depends on I2C |
| 425 | select REGMAP_I2C |
| 426 | help |
| 427 | This driver supports Fairchild FAN53555 Digitally Programmable |
| 428 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage |
| 429 | regulator that delivers a digitally programmable output from an |
| 430 | input voltage supply of 2.5V to 5.5V. The output voltage is |
| 431 | programmed through an I2C interface. |
| 432 | |
| 433 | config REGULATOR_FAN53880 |
| 434 | tristate "Fairchild FAN53880 Regulator" |
| 435 | depends on I2C && OF |
| 436 | select REGMAP_I2C |
| 437 | help |
| 438 | This driver supports Fairchild (ON Semiconductor) FAN53880 |
| 439 | regulator. The regulator is a programmable power management IC |
| 440 | (PMIC), it is controlled by I2C and provides one BUCK, one BOOST |
| 441 | and four LDO outputs. |
| 442 | |
| 443 | config REGULATOR_GPIO |
| 444 | tristate "GPIO regulator support" |
| 445 | depends on GPIOLIB || COMPILE_TEST |
| 446 | help |
| 447 | This driver provides support for regulators that can be |
| 448 | controlled via gpios. |
| 449 | It is capable of supporting current and voltage regulators |
| 450 | and the platform has to provide a mapping of GPIO-states |
| 451 | to target volts/amps. |
| 452 | |
| 453 | config REGULATOR_HI6421 |
| 454 | tristate "HiSilicon Hi6421 PMIC voltage regulator support" |
| 455 | depends on MFD_HI6421_PMIC && OF |
| 456 | help |
| 457 | This driver provides support for the voltage regulators on the |
| 458 | HiSilicon Hi6421 PMU / Codec IC. |
| 459 | Hi6421 is a multi-function device which, on regulator part, provides |
| 460 | 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All |
| 461 | of them come with support to either ECO (idle) or sleep mode. |
| 462 | |
| 463 | config REGULATOR_HI6421V530 |
| 464 | tristate "HiSilicon Hi6421v530 PMIC voltage regulator support" |
| 465 | depends on MFD_HI6421_PMIC && OF |
| 466 | help |
| 467 | This driver provides support for the voltage regulators on |
| 468 | HiSilicon Hi6421v530 PMU / Codec IC. |
| 469 | Hi6421v530 is a multi-function device which, on regulator part, |
| 470 | provides 5 general purpose LDOs, and all of them come with support |
| 471 | to either ECO (idle) or sleep mode. |
| 472 | |
| 473 | config REGULATOR_HI655X |
| 474 | tristate "Hisilicon HI655X PMIC regulators support" |
| 475 | depends on ARCH_HISI || COMPILE_TEST |
| 476 | depends on MFD_HI655X_PMIC && OF |
| 477 | help |
| 478 | This driver provides support for the voltage regulators of the |
| 479 | Hisilicon Hi655x PMIC device. |
| 480 | |
| 481 | config REGULATOR_HI6421V600 |
| 482 | tristate "HiSilicon Hi6421v600 PMIC voltage regulator support" |
| 483 | depends on MFD_HI6421_SPMI && OF |
| 484 | select REGMAP |
| 485 | help |
| 486 | This driver provides support for the voltage regulators on |
| 487 | HiSilicon Hi6421v600 PMU / Codec IC. |
| 488 | This is used on Kirin 3670 boards, like HiKey 970. |
| 489 | |
| 490 | config REGULATOR_ISL9305 |
| 491 | tristate "Intersil ISL9305 regulator" |
| 492 | depends on I2C |
| 493 | select REGMAP_I2C |
| 494 | help |
| 495 | This driver supports ISL9305 voltage regulator chip. |
| 496 | |
| 497 | config REGULATOR_ISL6271A |
| 498 | tristate "Intersil ISL6271A Power regulator" |
| 499 | depends on I2C |
| 500 | help |
| 501 | This driver supports ISL6271A voltage regulator chip. |
| 502 | |
| 503 | config REGULATOR_FP9931 |
| 504 | tristate "FitiPower FP9931/JD9930 EPD regulator" |
| 505 | depends on I2C |
| 506 | select REGMAP_I2C |
| 507 | help |
| 508 | This driver supports the FP9931/JD9930 voltage regulator chip |
| 509 | which is used to provide power to Electronic Paper Displays |
| 510 | so it is found in E-Book readers. |
| 511 | If HWMON is enabled, it also provides temperature measurement. |
| 512 | |
| 513 | config REGULATOR_LM363X |
| 514 | tristate "TI LM363X voltage regulators" |
| 515 | depends on MFD_TI_LMU |
| 516 | help |
| 517 | This driver supports LM3631, LM3632 and LM36274 voltage regulators for |
| 518 | the LCD bias. |
| 519 | One boost output voltage is configurable and always on. |
| 520 | Other LDOs are used for the display module. |
| 521 | |
| 522 | config REGULATOR_LOCHNAGAR |
| 523 | tristate "Cirrus Logic Lochnagar regulator driver" |
| 524 | depends on MFD_LOCHNAGAR |
| 525 | help |
| 526 | This enables regulator support on the Cirrus Logic Lochnagar audio |
| 527 | development board. |
| 528 | |
| 529 | config REGULATOR_LP3971 |
| 530 | tristate "National Semiconductors LP3971 PMIC regulator driver" |
| 531 | depends on I2C |
| 532 | help |
| 533 | Say Y here to support the voltage regulators and convertors |
| 534 | on National Semiconductors LP3971 PMIC |
| 535 | |
| 536 | config REGULATOR_LP3972 |
| 537 | tristate "National Semiconductors LP3972 PMIC regulator driver" |
| 538 | depends on I2C |
| 539 | help |
| 540 | Say Y here to support the voltage regulators and convertors |
| 541 | on National Semiconductors LP3972 PMIC |
| 542 | |
| 543 | config REGULATOR_LP872X |
| 544 | tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
| 545 | depends on I2C |
| 546 | select REGMAP_I2C |
| 547 | help |
| 548 | This driver supports LP8720/LP8725 PMIC |
| 549 | |
| 550 | config REGULATOR_LP873X |
| 551 | tristate "TI LP873X Power regulators" |
| 552 | depends on MFD_TI_LP873X && OF |
| 553 | help |
| 554 | This driver supports LP873X voltage regulator chips. LP873X |
| 555 | provides two step-down converters and two general-purpose LDO |
| 556 | voltage regulators. It supports software based voltage control |
| 557 | for different voltage domains |
| 558 | |
| 559 | config REGULATOR_LP8755 |
| 560 | tristate "TI LP8755 High Performance PMU driver" |
| 561 | depends on I2C |
| 562 | select REGMAP_I2C |
| 563 | help |
| 564 | This driver supports LP8755 High Performance PMU driver. This |
| 565 | chip contains six step-down DC/DC converters which can support |
| 566 | 9 mode multiphase configuration. |
| 567 | |
| 568 | config REGULATOR_LP87565 |
| 569 | tristate "TI LP87565 Power regulators" |
| 570 | depends on MFD_TI_LP87565 && OF |
| 571 | help |
| 572 | This driver supports LP87565 voltage regulator chips. LP87565 |
| 573 | provides four step-down converters. It supports software based |
| 574 | voltage control for different voltage domains |
| 575 | |
| 576 | config REGULATOR_LP8788 |
| 577 | tristate "TI LP8788 Power Regulators" |
| 578 | depends on MFD_LP8788 |
| 579 | help |
| 580 | This driver supports LP8788 voltage regulator chip. |
| 581 | |
| 582 | config REGULATOR_LTC3589 |
| 583 | tristate "LTC3589 8-output voltage regulator" |
| 584 | depends on I2C |
| 585 | select REGMAP_I2C |
| 586 | help |
| 587 | This enables support for the LTC3589, LTC3589-1, and LTC3589-2 |
| 588 | 8-output regulators controlled via I2C. |
| 589 | |
| 590 | config REGULATOR_LTC3676 |
| 591 | tristate "LTC3676 8-output voltage regulator" |
| 592 | depends on I2C |
| 593 | select REGMAP_I2C |
| 594 | help |
| 595 | This enables support for the LTC3676 |
| 596 | 8-output regulators controlled via I2C. |
| 597 | |
| 598 | config REGULATOR_MAX14577 |
| 599 | tristate "Maxim 14577/77836 regulator" |
| 600 | depends on MFD_MAX14577 |
| 601 | help |
| 602 | This driver controls a Maxim MAX14577/77836 regulator via I2C bus. |
| 603 | The MAX14577 regulators include safeout LDO and charger current |
| 604 | regulator. The MAX77836 has two additional LDOs. |
| 605 | |
| 606 | config REGULATOR_MAX1586 |
| 607 | tristate "Maxim 1586/1587 voltage regulator" |
| 608 | depends on I2C |
| 609 | help |
| 610 | This driver controls a Maxim 1586 or 1587 voltage output |
| 611 | regulator via I2C bus. The provided regulator is suitable |
| 612 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. |
| 613 | |
| 614 | config REGULATOR_MAX5970 |
| 615 | tristate "Maxim 5970/5978 power switch and monitor" |
| 616 | depends on I2C |
| 617 | depends on OF |
| 618 | depends on MFD_MAX5970 |
| 619 | help |
| 620 | This driver controls a Maxim 5970/5978 switch via I2C bus. |
| 621 | The MAX5970/5978 is a smart switch with no output regulation, but |
| 622 | fault protection and voltage and current monitoring capabilities. |
| 623 | |
| 624 | config REGULATOR_MAX77503 |
| 625 | tristate "Analog Devices MAX77503 Regulator" |
| 626 | depends on I2C |
| 627 | select REGMAP_I2C |
| 628 | help |
| 629 | This driver controls a Analog Devices MAX77503 14V input, 1.5A |
| 630 | high-efficiency buck converter via I2C bus. |
| 631 | Say M here if you want to include support for the regulator as a |
| 632 | module. |
| 633 | |
| 634 | config REGULATOR_MAX77541 |
| 635 | tristate "Analog Devices MAX77541/77540 Regulator" |
| 636 | depends on MFD_MAX77541 |
| 637 | help |
| 638 | This driver controls a Analog Devices MAX77541/77540 regulators |
| 639 | via I2C bus. Both MAX77540 and MAX77541 are dual-phase |
| 640 | high-efficiency buck converter. Say Y here to |
| 641 | enable the regulator driver. |
| 642 | Say M here if you want to include support for the regulator as a |
| 643 | module. |
| 644 | |
| 645 | config REGULATOR_MAX77620 |
| 646 | tristate "Maxim 77620/MAX20024 voltage regulator" |
| 647 | depends on MFD_MAX77620 || COMPILE_TEST |
| 648 | help |
| 649 | This driver controls Maxim MAX77620 voltage output regulator |
| 650 | via I2C bus. The provided regulator is suitable for Tegra |
| 651 | chip to control Step-Down DC-DC and LDOs. Say Y here to |
| 652 | enable the regulator driver. |
| 653 | |
| 654 | config REGULATOR_MAX77650 |
| 655 | tristate "Maxim MAX77650/77651 regulator support" |
| 656 | depends on MFD_MAX77650 || COMPILE_TEST |
| 657 | help |
| 658 | Regulator driver for MAX77650/77651 PMIC from Maxim |
| 659 | Semiconductor. This device has a SIMO with three independent |
| 660 | power rails and an LDO. |
| 661 | |
| 662 | config REGULATOR_MAX77675 |
| 663 | tristate "Maxim MAX77675 regulator driver" |
| 664 | depends on I2C && OF |
| 665 | select REGMAP_I2C |
| 666 | help |
| 667 | This driver controls the Maxim MAX77675 power regulator via I2C. |
| 668 | It supports four programmable buck-boost outputs. |
| 669 | Say Y here to enable the regulator driver |
| 670 | |
| 671 | config REGULATOR_MAX77857 |
| 672 | tristate "ADI MAX77857/MAX77831 regulator support" |
| 673 | depends on I2C |
| 674 | select REGMAP_I2C |
| 675 | help |
| 676 | This driver controls a ADI MAX77857 and MAX77831 regulators. |
| 677 | via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost |
| 678 | converters with input voltage range (2.5V to 16V). Say Y here to |
| 679 | enable the regulator driver |
| 680 | |
| 681 | config REGULATOR_MAX8649 |
| 682 | tristate "Maxim 8649 voltage regulator" |
| 683 | depends on I2C |
| 684 | select REGMAP_I2C |
| 685 | help |
| 686 | This driver controls a Maxim 8649 voltage output regulator via |
| 687 | I2C bus. |
| 688 | |
| 689 | config REGULATOR_MAX8660 |
| 690 | tristate "Maxim 8660/8661 voltage regulator" |
| 691 | depends on I2C |
| 692 | help |
| 693 | This driver controls a Maxim 8660/8661 voltage output |
| 694 | regulator via I2C bus. |
| 695 | |
| 696 | config REGULATOR_MAX8893 |
| 697 | tristate "Maxim 8893 voltage regulator" |
| 698 | depends on I2C |
| 699 | select REGMAP_I2C |
| 700 | help |
| 701 | This driver controls a Maxim 8893 voltage output |
| 702 | regulator via I2C bus. |
| 703 | |
| 704 | config REGULATOR_MAX8907 |
| 705 | tristate "Maxim 8907 voltage regulator" |
| 706 | depends on MFD_MAX8907 || COMPILE_TEST |
| 707 | help |
| 708 | This driver controls a Maxim 8907 voltage output regulator |
| 709 | via I2C bus. The provided regulator is suitable for Tegra |
| 710 | chip to control Step-Down DC-DC and LDOs. |
| 711 | |
| 712 | config REGULATOR_MAX8925 |
| 713 | tristate "Maxim MAX8925 Power Management IC" |
| 714 | depends on MFD_MAX8925 |
| 715 | help |
| 716 | Say y here to support the voltage regulator of Maxim MAX8925 PMIC. |
| 717 | |
| 718 | config REGULATOR_MAX8952 |
| 719 | tristate "Maxim MAX8952 Power Management IC" |
| 720 | depends on I2C |
| 721 | help |
| 722 | This driver controls a Maxim 8952 voltage output regulator |
| 723 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS |
| 724 | modes ranging from 0.77V to 1.40V by 0.01V steps. |
| 725 | |
| 726 | config REGULATOR_MAX8973 |
| 727 | tristate "Maxim MAX8973A voltage regulator" |
| 728 | depends on I2C |
| 729 | depends on THERMAL && THERMAL_OF |
| 730 | select REGMAP_I2C |
| 731 | help |
| 732 | The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down |
| 733 | switching regulator delivers up to 9A of output current. Each |
| 734 | phase operates at a 2MHz fixed frequency with a 120 deg shift |
| 735 | from the adjacent phase, allowing the use of small magnetic component. |
| 736 | |
| 737 | config REGULATOR_MAX8997 |
| 738 | tristate "Maxim 8997/8966 regulator" |
| 739 | depends on MFD_MAX8997 |
| 740 | help |
| 741 | This driver controls a Maxim 8997/8966 regulator |
| 742 | via I2C bus. The provided regulator is suitable for S5PC110, |
| 743 | S5PV210, and Exynos-4 chips to control VCC_CORE and |
| 744 | VCC_USIM voltages. |
| 745 | |
| 746 | config REGULATOR_MAX8998 |
| 747 | tristate "Maxim 8998 voltage regulator" |
| 748 | depends on MFD_MAX8998 |
| 749 | help |
| 750 | This driver controls a Maxim 8998 voltage output regulator |
| 751 | via I2C bus. The provided regulator is suitable for S3C6410 |
| 752 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. |
| 753 | |
| 754 | config REGULATOR_MAX20086 |
| 755 | tristate "Maxim MAX20086-MAX20089 Camera Power Protectors" |
| 756 | depends on I2C |
| 757 | select REGMAP_I2C |
| 758 | help |
| 759 | This driver controls a Maxim MAX20086-MAX20089 camera power |
| 760 | protector via I2C bus. The regulator has 2 or 4 outputs depending on |
| 761 | the device model. This driver is only capable to turn on/off them. |
| 762 | |
| 763 | config REGULATOR_MAX20411 |
| 764 | tristate "Maxim MAX20411 High-Efficiency Single Step-Down Converter" |
| 765 | depends on I2C |
| 766 | select REGMAP_I2C |
| 767 | help |
| 768 | This driver controls the Maxim MAX20411 family of high-efficiency, |
| 769 | syncrhonous step-down converters. |
| 770 | |
| 771 | config REGULATOR_MAX77686 |
| 772 | tristate "Maxim 77686 regulator" |
| 773 | depends on MFD_MAX77686 || COMPILE_TEST |
| 774 | help |
| 775 | This driver controls a Maxim 77686 regulator |
| 776 | via I2C bus. The provided regulator is suitable for |
| 777 | Exynos-4 chips to control VARM and VINT voltages. |
| 778 | |
| 779 | config REGULATOR_MAX77693 |
| 780 | tristate "Maxim 77693/77843 regulator" |
| 781 | depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST |
| 782 | help |
| 783 | This driver controls a Maxim 77693/77843 regulators via I2C bus. |
| 784 | The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' |
| 785 | and one current regulator 'CHARGER'. This is suitable for |
| 786 | Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. |
| 787 | |
| 788 | config REGULATOR_MAX77802 |
| 789 | tristate "Maxim 77802 regulator" |
| 790 | depends on MFD_MAX77686 || COMPILE_TEST |
| 791 | help |
| 792 | This driver controls a Maxim 77802 regulator |
| 793 | via I2C bus. The provided regulator is suitable for |
| 794 | Exynos5420/Exynos5800 SoCs to control various voltages. |
| 795 | It includes support for control of voltage and ramp speed. |
| 796 | |
| 797 | config REGULATOR_MAX77826 |
| 798 | tristate "Maxim 77826 regulator" |
| 799 | depends on I2C |
| 800 | select REGMAP_I2C |
| 801 | help |
| 802 | This driver controls a Maxim 77826 regulator via I2C bus. |
| 803 | The regulator include 15 LDOs, BUCK and BUCK BOOST regulator. |
| 804 | It includes support for control of output voltage. This |
| 805 | regulator is found on the Samsung Galaxy S5 (klte) smartphone. |
| 806 | |
| 807 | config REGULATOR_MAX77838 |
| 808 | tristate "Maxim 77838 regulator" |
| 809 | depends on I2C |
| 810 | select REGMAP_I2C |
| 811 | help |
| 812 | This driver controls a Maxim 77838 regulator via I2C bus. |
| 813 | The regulator include 4 LDOs and a BUCK regulator. It's |
| 814 | present on the Samsung Galaxy S7 lineup of smartphones. |
| 815 | |
| 816 | config REGULATOR_MC13XXX_CORE |
| 817 | tristate |
| 818 | |
| 819 | config REGULATOR_MC13783 |
| 820 | tristate "Freescale MC13783 regulator driver" |
| 821 | depends on MFD_MC13XXX |
| 822 | select REGULATOR_MC13XXX_CORE |
| 823 | help |
| 824 | Say y here to support the regulators found on the Freescale MC13783 |
| 825 | PMIC. |
| 826 | |
| 827 | config REGULATOR_MC13892 |
| 828 | tristate "Freescale MC13892 regulator driver" |
| 829 | depends on MFD_MC13XXX |
| 830 | select REGULATOR_MC13XXX_CORE |
| 831 | help |
| 832 | Say y here to support the regulators found on the Freescale MC13892 |
| 833 | PMIC. |
| 834 | |
| 835 | config REGULATOR_MCP16502 |
| 836 | tristate "Microchip MCP16502 PMIC" |
| 837 | depends on I2C && OF |
| 838 | select REGMAP_I2C |
| 839 | help |
| 840 | Say y here to support the MCP16502 PMIC. This driver supports |
| 841 | basic operations (get/set voltage, get/set operating mode) |
| 842 | through the regulator interface. In addition it enables |
| 843 | suspend-to-ram/standby transition. |
| 844 | |
| 845 | config REGULATOR_MP5416 |
| 846 | tristate "Monolithic MP5416 PMIC" |
| 847 | depends on I2C && OF |
| 848 | select REGMAP_I2C |
| 849 | help |
| 850 | Say y here to support the MP5416 PMIC. This will enable supports |
| 851 | the software controllable 4 buck and 4 LDO regulators. |
| 852 | Say M here if you want to include support for the regulator as a |
| 853 | module. |
| 854 | |
| 855 | config REGULATOR_MP8859 |
| 856 | tristate "MPS MP8859 regulator driver" |
| 857 | depends on I2C |
| 858 | select REGMAP_I2C |
| 859 | help |
| 860 | Say y here to support the MP8859 voltage regulator. This driver |
| 861 | supports basic operations (get/set voltage) through the regulator |
| 862 | interface. |
| 863 | Say M here if you want to include support for the regulator as a |
| 864 | module. The module will be named "mp8859". |
| 865 | |
| 866 | config REGULATOR_MP886X |
| 867 | tristate "MPS MP8869 regulator driver" |
| 868 | depends on I2C && OF |
| 869 | select REGMAP_I2C |
| 870 | help |
| 871 | This driver supports the MP8869 voltage regulator. |
| 872 | |
| 873 | config REGULATOR_MPQ7920 |
| 874 | tristate "Monolithic MPQ7920 PMIC" |
| 875 | depends on I2C && OF |
| 876 | select REGMAP_I2C |
| 877 | help |
| 878 | Say y here to support the MPQ7920 PMIC. This will enable supports |
| 879 | the software controllable 4 buck and 5 LDO regulators. |
| 880 | This driver supports the control of different power rails of device |
| 881 | through regulator interface. |
| 882 | |
| 883 | config REGULATOR_MT6311 |
| 884 | tristate "MediaTek MT6311 PMIC" |
| 885 | depends on I2C |
| 886 | select REGMAP_I2C |
| 887 | help |
| 888 | Say y here to select this option to enable the power regulator of |
| 889 | MediaTek MT6311 PMIC. |
| 890 | This driver supports the control of different power rails of device |
| 891 | through regulator interface. |
| 892 | |
| 893 | config REGULATOR_MT6315 |
| 894 | tristate "MediaTek MT6315 PMIC" |
| 895 | depends on SPMI |
| 896 | select REGMAP_SPMI |
| 897 | help |
| 898 | Say y here to select this option to enable the power regulator of |
| 899 | MediaTek MT6315 PMIC. |
| 900 | This driver supports the control of different power rails of device |
| 901 | through regulator interface. |
| 902 | |
| 903 | config REGULATOR_MT6316 |
| 904 | tristate "MT6316 SPMI PMIC regulator driver" |
| 905 | depends on SPMI |
| 906 | select REGMAP_SPMI |
| 907 | help |
| 908 | Say Y here to enable support for 2+2, 3+1 and 4 phase regulators |
| 909 | found in the MediaTek MT6316 BP, CP, DP, HP, VP and TP SPMI PMICs. |
| 910 | This driver supports the control of different power rails of device |
| 911 | through regulator interface. |
| 912 | |
| 913 | config REGULATOR_MT6323 |
| 914 | tristate "MediaTek MT6323 PMIC" |
| 915 | depends on MFD_MT6397 |
| 916 | help |
| 917 | Say y here to select this option to enable the power regulator of |
| 918 | MediaTek MT6323 PMIC. |
| 919 | This driver supports the control of different power rails of device |
| 920 | through regulator interface. |
| 921 | |
| 922 | config REGULATOR_MT6331 |
| 923 | tristate "MediaTek MT6331 PMIC" |
| 924 | depends on MFD_MT6397 |
| 925 | help |
| 926 | Say y here to select this option to enable the power regulator of |
| 927 | MediaTek MT6331 PMIC. |
| 928 | This driver supports the control of different power rails of device |
| 929 | through regulator interface |
| 930 | |
| 931 | config REGULATOR_MT6332 |
| 932 | tristate "MediaTek MT6332 PMIC" |
| 933 | depends on MFD_MT6397 |
| 934 | help |
| 935 | Say y here to select this option to enable the power regulator of |
| 936 | MediaTek MT6332 PMIC. |
| 937 | This driver supports the control of different power rails of device |
| 938 | through regulator interface |
| 939 | |
| 940 | config REGULATOR_MT6357 |
| 941 | tristate "MediaTek MT6357 PMIC" |
| 942 | depends on MFD_MT6397 |
| 943 | help |
| 944 | Say y here to select this option to enable the power regulator of |
| 945 | MediaTek MT6357 PMIC. |
| 946 | This driver supports the control of different power rails of device |
| 947 | through regulator interface. |
| 948 | |
| 949 | config REGULATOR_MT6358 |
| 950 | tristate "MediaTek MT6358 PMIC" |
| 951 | depends on MFD_MT6397 |
| 952 | help |
| 953 | Say y here to select this option to enable the power regulator of |
| 954 | MediaTek MT6358 PMIC. |
| 955 | This driver supports the control of different power rails of device |
| 956 | through regulator interface. |
| 957 | |
| 958 | config REGULATOR_MT6359 |
| 959 | tristate "MediaTek MT6359 PMIC" |
| 960 | depends on MFD_MT6397 |
| 961 | help |
| 962 | Say y here to select this option to enable the power regulator of |
| 963 | MediaTek MT6359 PMIC. |
| 964 | This driver supports the control of different power rails of device |
| 965 | through regulator interface. |
| 966 | |
| 967 | config REGULATOR_MT6360 |
| 968 | tristate "MT6360 SubPMIC Regulator" |
| 969 | depends on MFD_MT6360 |
| 970 | help |
| 971 | Say Y here to enable MT6360 regulator support. |
| 972 | This is support MT6360 PMIC/LDO part include |
| 973 | 2-channel buck with Thermal Shutdown and Overload Protection |
| 974 | 6-channel High PSRR and Low Dropout LDO. |
| 975 | |
| 976 | config REGULATOR_MT6363 |
| 977 | tristate "MT6363 SPMI PMIC regulator driver" |
| 978 | depends on SPMI |
| 979 | select REGMAP_SPMI |
| 980 | select IRQ_DOMAIN |
| 981 | help |
| 982 | Say Y here to enable support for regulators found in the MediaTek |
| 983 | MT6363 SPMI PMIC. |
| 984 | This driver supports the control of different power rails of device |
| 985 | through regulator interface. |
| 986 | |
| 987 | config REGULATOR_MT6370 |
| 988 | tristate "MT6370 SubPMIC Regulator" |
| 989 | depends on MFD_MT6370 |
| 990 | help |
| 991 | Say Y here to enable MT6370 regulator support. |
| 992 | This driver supports the control for DisplayBias voltages and one |
| 993 | general purpose LDO which is commonly used to drive the vibrator. |
| 994 | |
| 995 | config REGULATOR_MT6380 |
| 996 | tristate "MediaTek MT6380 PMIC" |
| 997 | depends on MTK_PMIC_WRAP |
| 998 | help |
| 999 | Say y here to select this option to enable the power regulator of |
| 1000 | MediaTek MT6380 PMIC. |
| 1001 | This driver supports the control of different power rails of device |
| 1002 | through regulator interface. |
| 1003 | |
| 1004 | config REGULATOR_MT6397 |
| 1005 | tristate "MediaTek MT6397 PMIC" |
| 1006 | depends on MFD_MT6397 |
| 1007 | help |
| 1008 | Say y here to select this option to enable the power regulator of |
| 1009 | MediaTek MT6397 PMIC. |
| 1010 | This driver supports the control of different power rails of device |
| 1011 | through regulator interface. |
| 1012 | |
| 1013 | config REGULATOR_MTK_DVFSRC |
| 1014 | tristate "MediaTek DVFSRC regulator driver" |
| 1015 | depends on MTK_DVFSRC |
| 1016 | help |
| 1017 | Say y here to control regulator by DVFSRC (dynamic voltage |
| 1018 | and frequency scaling resource collector). |
| 1019 | This driver supports to control regulators via the DVFSRC |
| 1020 | of Mediatek. It allows for voting on regulator state |
| 1021 | between multiple users. |
| 1022 | |
| 1023 | config REGULATOR_PALMAS |
| 1024 | tristate "TI Palmas PMIC Regulators" |
| 1025 | depends on MFD_PALMAS |
| 1026 | help |
| 1027 | If you wish to control the regulators on the Palmas series of |
| 1028 | chips say Y here. This will enable support for all the software |
| 1029 | controllable SMPS/LDO regulators. |
| 1030 | |
| 1031 | The regulators available on Palmas series chips vary depending |
| 1032 | on the muxing. This is handled automatically in the driver by |
| 1033 | reading the mux info from OTP. |
| 1034 | |
| 1035 | config REGULATOR_PBIAS |
| 1036 | tristate "PBIAS OMAP regulator driver" |
| 1037 | depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON |
| 1038 | help |
| 1039 | Say y here to support pbias regulator for mmc1:SD card i/o |
| 1040 | on OMAP SoCs. |
| 1041 | This driver provides support for OMAP pbias modelled |
| 1042 | regulators. |
| 1043 | |
| 1044 | config REGULATOR_PCA9450 |
| 1045 | tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver" |
| 1046 | depends on I2C |
| 1047 | select REGMAP_I2C |
| 1048 | help |
| 1049 | Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC |
| 1050 | regulator driver. |
| 1051 | |
| 1052 | config REGULATOR_PF9453 |
| 1053 | tristate "NXP PF9453 regulator driver" |
| 1054 | depends on I2C |
| 1055 | select REGMAP_I2C |
| 1056 | help |
| 1057 | Say y here to support the NXP PF9453 PMIC regulator driver. |
| 1058 | |
| 1059 | config REGULATOR_PF0900 |
| 1060 | tristate "NXP PF0900/PF0901/PF09XX regulator driver" |
| 1061 | depends on I2C |
| 1062 | select REGMAP_I2C |
| 1063 | help |
| 1064 | Say y here to support the NXP PF0900/PF0901/PF09XX PMIC |
| 1065 | regulator driver. |
| 1066 | |
| 1067 | config REGULATOR_PF530X |
| 1068 | tristate "NXP PF5300/PF5301/PF5302 regulator driver" |
| 1069 | depends on I2C && OF |
| 1070 | select REGMAP_I2C |
| 1071 | help |
| 1072 | Say y here to support the regulators found on the NXP |
| 1073 | PF5300/PF5301/PF5302 PMIC. |
| 1074 | |
| 1075 | Say M here if you want to support for the regulators found |
| 1076 | on the NXP PF5300/PF5301/PF5302 PMIC. The module will be named |
| 1077 | "pf530x-regulator". |
| 1078 | |
| 1079 | config REGULATOR_PF8X00 |
| 1080 | tristate "NXP PF8100/PF8121A/PF8200 regulator driver" |
| 1081 | depends on I2C && OF |
| 1082 | select REGMAP_I2C |
| 1083 | help |
| 1084 | Say y here to support the regulators found on the NXP |
| 1085 | PF8100/PF8121A/PF8200 PMIC. |
| 1086 | |
| 1087 | Say M here if you want to support for the regulators found |
| 1088 | on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named |
| 1089 | "pf8x00-regulator". |
| 1090 | |
| 1091 | config REGULATOR_PFUZE100 |
| 1092 | tristate "Freescale PFUZE100/200/3000/3001 regulator driver" |
| 1093 | depends on I2C && OF |
| 1094 | select REGMAP_I2C |
| 1095 | help |
| 1096 | Say y here to support the regulators found on the Freescale |
| 1097 | PFUZE100/200/3000/3001 PMIC. |
| 1098 | |
| 1099 | config REGULATOR_PV88060 |
| 1100 | tristate "Powerventure Semiconductor PV88060 regulator" |
| 1101 | depends on I2C |
| 1102 | select REGMAP_I2C |
| 1103 | help |
| 1104 | Say y here to support the voltage regulators and convertors |
| 1105 | PV88060 |
| 1106 | |
| 1107 | config REGULATOR_PV88080 |
| 1108 | tristate "Powerventure Semiconductor PV88080 regulator" |
| 1109 | depends on I2C |
| 1110 | select REGMAP_I2C |
| 1111 | help |
| 1112 | Say y here to support the buck convertors on PV88080 |
| 1113 | |
| 1114 | config REGULATOR_PV88090 |
| 1115 | tristate "Powerventure Semiconductor PV88090 regulator" |
| 1116 | depends on I2C |
| 1117 | select REGMAP_I2C |
| 1118 | help |
| 1119 | Say y here to support the voltage regulators and convertors |
| 1120 | on PV88090 |
| 1121 | |
| 1122 | config REGULATOR_PF1550 |
| 1123 | tristate "NXP PF1550 regulator" |
| 1124 | depends on MFD_PF1550 |
| 1125 | help |
| 1126 | Say y here to select this option to enable the regulators on |
| 1127 | the PF1550 PMICs. |
| 1128 | This driver controls the PF1550 regulators via I2C bus. |
| 1129 | The regulators include three bucks and three ldos. |
| 1130 | |
| 1131 | config REGULATOR_PWM |
| 1132 | tristate "PWM voltage regulator" |
| 1133 | depends on PWM |
| 1134 | help |
| 1135 | This driver supports PWM controlled voltage regulators. PWM |
| 1136 | duty cycle can increase or decrease the voltage. |
| 1137 | |
| 1138 | config REGULATOR_QCOM_PM8008 |
| 1139 | tristate "Qualcomm PM8008 PMIC regulators" |
| 1140 | depends on MFD_QCOM_PM8008 |
| 1141 | help |
| 1142 | Select this option to enable support for the voltage regulators in |
| 1143 | Qualcomm PM8008 PMICs. |
| 1144 | |
| 1145 | config REGULATOR_QCOM_REFGEN |
| 1146 | tristate "Qualcomm REFGEN regulator driver" |
| 1147 | depends on ARCH_QCOM || COMPILE_TEST |
| 1148 | depends on HAS_IOMEM |
| 1149 | depends on REGMAP |
| 1150 | help |
| 1151 | This driver supports the MMIO-mapped reference voltage regulator, |
| 1152 | used internally by some PHYs on many Qualcomm SoCs. |
| 1153 | |
| 1154 | Say M here if you want to include support for this regulator as |
| 1155 | a module. The module will be named "qcom-refgen-regulator". |
| 1156 | |
| 1157 | config REGULATOR_QCOM_RPM |
| 1158 | tristate "Qualcomm RPM regulator driver" |
| 1159 | depends on MFD_QCOM_RPM |
| 1160 | help |
| 1161 | If you say yes to this option, support will be included for the |
| 1162 | regulators exposed by the Resource Power Manager found in Qualcomm |
| 1163 | 8660, 8960 and 8064 based devices. |
| 1164 | |
| 1165 | Say M here if you want to include support for the regulators on the |
| 1166 | Qualcomm RPM as a module. The module will be named |
| 1167 | "qcom_rpm-regulator". |
| 1168 | |
| 1169 | config REGULATOR_QCOM_RPMH |
| 1170 | tristate "Qualcomm RPMh regulator driver" |
| 1171 | depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST) |
| 1172 | depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST) |
| 1173 | help |
| 1174 | This driver supports control of PMIC regulators via the RPMh hardware |
| 1175 | block found on Qualcomm Technologies Inc. SoCs. RPMh regulator |
| 1176 | control allows for voting on regulator state between multiple |
| 1177 | processors within the SoC. |
| 1178 | |
| 1179 | config REGULATOR_QCOM_SMD_RPM |
| 1180 | tristate "Qualcomm SMD based RPM regulator driver" |
| 1181 | depends on QCOM_SMD_RPM |
| 1182 | help |
| 1183 | If you say yes to this option, support will be included for the |
| 1184 | regulators exposed by the Resource Power Manager found in Qualcomm |
| 1185 | 8974 based devices. |
| 1186 | |
| 1187 | Say M here if you want to include support for the regulators on the |
| 1188 | Qualcomm RPM as a module. The module will be named |
| 1189 | "qcom_smd-regulator". |
| 1190 | |
| 1191 | config REGULATOR_QCOM_SPMI |
| 1192 | tristate "Qualcomm SPMI regulator driver" |
| 1193 | depends on SPMI || COMPILE_TEST |
| 1194 | help |
| 1195 | If you say yes to this option, support will be included for the |
| 1196 | regulators found in Qualcomm SPMI PMICs. |
| 1197 | |
| 1198 | Say M here if you want to include support for the regulators on the |
| 1199 | Qualcomm SPMI PMICs as a module. The module will be named |
| 1200 | "qcom_spmi-regulator". |
| 1201 | |
| 1202 | config REGULATOR_QCOM_USB_VBUS |
| 1203 | tristate "Qualcomm USB Vbus regulator driver" |
| 1204 | depends on SPMI || COMPILE_TEST |
| 1205 | help |
| 1206 | If you say yes to this option, support will be included for the |
| 1207 | regulator used to enable the VBUS output. |
| 1208 | |
| 1209 | Say M here if you want to include support for enabling the VBUS output |
| 1210 | as a module. The module will be named "qcom_usb_vbus_regulator". |
| 1211 | |
| 1212 | config REGULATOR_RAA215300 |
| 1213 | tristate "Renesas RAA215300 driver" |
| 1214 | select REGMAP_I2C |
| 1215 | depends on COMMON_CLK |
| 1216 | depends on I2C |
| 1217 | help |
| 1218 | If you say yes to this option, support will be included for the |
| 1219 | Renesas RAA215300 PMIC. |
| 1220 | |
| 1221 | Say M here if you want to include support for Renesas RAA215300 PMIC |
| 1222 | as a module. The module will be named "raa215300". |
| 1223 | |
| 1224 | config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY |
| 1225 | tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator" |
| 1226 | depends on ARM || ARM64 || COMPILE_TEST |
| 1227 | depends on BACKLIGHT_CLASS_DEVICE |
| 1228 | depends on GPIOLIB |
| 1229 | depends on I2C |
| 1230 | select REGMAP_I2C |
| 1231 | help |
| 1232 | This driver supports ATTINY regulator on the Raspberry Pi 7-inch |
| 1233 | touchscreen unit. The regulator is used to enable power to the |
| 1234 | TC358762, display and to control backlight. |
| 1235 | |
| 1236 | config REGULATOR_RASPBERRYPI_TOUCHSCREEN_V2 |
| 1237 | tristate "Raspberry Pi 7-inch touchscreen panel V2 regulator" |
| 1238 | depends on ARM || ARM64 || COMPILE_TEST |
| 1239 | depends on GPIOLIB |
| 1240 | depends on I2C && OF |
| 1241 | select GPIO_REGMAP |
| 1242 | select REGMAP_I2C |
| 1243 | help |
| 1244 | This driver supports regulator on the V2 Raspberry Pi touchscreen |
| 1245 | unit. The regulator is used to enable power to the display and to |
| 1246 | control backlight PWM. |
| 1247 | |
| 1248 | config REGULATOR_RC5T583 |
| 1249 | tristate "RICOH RC5T583 Power regulators" |
| 1250 | depends on MFD_RC5T583 |
| 1251 | help |
| 1252 | Select this option to enable the power regulator of RICOH |
| 1253 | PMIC RC5T583. |
| 1254 | This driver supports the control of different power rails of device |
| 1255 | through regulator interface. The device supports multiple DCDC/LDO |
| 1256 | outputs which can be controlled by i2c communication. |
| 1257 | |
| 1258 | config REGULATOR_RK808 |
| 1259 | tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators" |
| 1260 | depends on MFD_RK8XX |
| 1261 | help |
| 1262 | Select this option to enable the power regulator of ROCKCHIP |
| 1263 | PMIC RK805,RK809&RK817,RK808 and RK818. |
| 1264 | This driver supports the control of different power rails of device |
| 1265 | through regulator interface. The device supports multiple DCDC/LDO |
| 1266 | outputs which can be controlled by i2c communication. |
| 1267 | |
| 1268 | config REGULATOR_RN5T618 |
| 1269 | tristate "Ricoh RN5T567/618 voltage regulators" |
| 1270 | depends on MFD_RN5T618 |
| 1271 | help |
| 1272 | Say y here to support the regulators found on Ricoh RN5T567, |
| 1273 | RN5T618 or RC5T619 PMIC. |
| 1274 | |
| 1275 | config REGULATOR_ROHM |
| 1276 | tristate |
| 1277 | |
| 1278 | config REGULATOR_RT4801 |
| 1279 | tristate "Richtek RT4801 Regulators" |
| 1280 | depends on I2C |
| 1281 | select REGMAP_I2C |
| 1282 | help |
| 1283 | This adds support for voltage regulators in Richtek RT4801 Display Bias IC. |
| 1284 | The device supports two regulators (DSVP/DSVN). |
| 1285 | |
| 1286 | config REGULATOR_RT4803 |
| 1287 | tristate "Richtek RT4803 boost regulator" |
| 1288 | depends on I2C |
| 1289 | select REGMAP_I2C |
| 1290 | help |
| 1291 | This adds support for RT4803 boost converter that integrates the |
| 1292 | bypass switch. If the input voltage is low than the required voltage, |
| 1293 | RT4803 will enter boost mode. Otherwise, enable internal bypass |
| 1294 | switch to enter bypass mode. |
| 1295 | |
| 1296 | config REGULATOR_RT4831 |
| 1297 | tristate "Richtek RT4831 DSV Regulators" |
| 1298 | depends on MFD_RT4831 |
| 1299 | help |
| 1300 | This adds support for voltage regulators in Richtek RT4831. |
| 1301 | There are three regulators (VLCM/DSVP/DSVN). |
| 1302 | VLCM is a virtual voltage input for DSVP/DSVN inside IC. |
| 1303 | And DSVP/DSVN is the real Vout range from 4V to 6.5V. |
| 1304 | It's common used to provide the power for the display panel. |
| 1305 | |
| 1306 | config REGULATOR_RT5033 |
| 1307 | tristate "Richtek RT5033 Regulators" |
| 1308 | depends on MFD_RT5033 |
| 1309 | help |
| 1310 | This adds support for voltage and current regulators in Richtek |
| 1311 | RT5033 PMIC. The device supports multiple regulators like |
| 1312 | current source, LDO and Buck. |
| 1313 | |
| 1314 | config REGULATOR_RT5120 |
| 1315 | tristate "Richtek RT5120 PMIC Regulators" |
| 1316 | depends on MFD_RT5120 |
| 1317 | help |
| 1318 | This adds support for voltage regulator in Richtek RT5120 PMIC. |
| 1319 | It integrates 4 channels buck controller, 1 channel LDO, 1 EXTEN |
| 1320 | to control external power source. Only BUCK1 is adjustable from |
| 1321 | 600mV to 1395mV, per step 6.250mV. The others are all fixed voltage |
| 1322 | by external hardware circuit. |
| 1323 | |
| 1324 | config REGULATOR_RT5133 |
| 1325 | tristate "Richtek RT5133 PMIC Regulators" |
| 1326 | depends on I2C && GPIOLIB && OF |
| 1327 | select REGMAP |
| 1328 | select CRC8 |
| 1329 | help |
| 1330 | This driver adds support for RT5133 PMIC regulators. |
| 1331 | RT5133 is an integrated chip. It includes 8 LDOs and 3 GPOs that |
| 1332 | can be used to drive output high/low purpose. The dependency of the |
| 1333 | GPO block is internally LDO1 Voltage. |
| 1334 | |
| 1335 | config REGULATOR_RT5190A |
| 1336 | tristate "Richtek RT5190A PMIC" |
| 1337 | depends on I2C |
| 1338 | select REGMAP_I2C |
| 1339 | help |
| 1340 | This adds support for voltage regulator in Richtek RT5190A PMIC. |
| 1341 | It integratas 1 channel buck controller, 3 channels high efficiency |
| 1342 | buck converters, 1 LDO, mute AC OFF depop function, with the general |
| 1343 | I2C control interface. |
| 1344 | |
| 1345 | config REGULATOR_RT5739 |
| 1346 | tristate "Richtek RT5739 Regulator" |
| 1347 | depends on I2C |
| 1348 | select REGMAP_I2C |
| 1349 | help |
| 1350 | This adds support for voltage regulator in Richtek RT5739. |
| 1351 | It's a step-down switching voltage regulator. Using a proprietary |
| 1352 | architecture with synchronous rectification, it is capable of |
| 1353 | delivering 3.5A continuously at over 80% efficiency. |
| 1354 | |
| 1355 | This driver can also be built as a module. If so, the module |
| 1356 | will be called rt5739. |
| 1357 | |
| 1358 | config REGULATOR_RT5759 |
| 1359 | tristate "Richtek RT5759 Regulator" |
| 1360 | depends on I2C |
| 1361 | select REGMAP_I2C |
| 1362 | help |
| 1363 | This adds support for voltage regulator in Richtek RT5759. |
| 1364 | The RT5759 is a high-performance, synchronous step-down DC-DC |
| 1365 | converter that can deliver up to 9A output current from 3V to 6.5V |
| 1366 | input supply. |
| 1367 | |
| 1368 | config REGULATOR_RT6160 |
| 1369 | tristate "Richtek RT6160 BuckBoost voltage regulator" |
| 1370 | depends on I2C |
| 1371 | select REGMAP_I2C |
| 1372 | help |
| 1373 | This adds support for voltage regulator in Richtek RT6160. |
| 1374 | This device automatically change voltage output mode from |
| 1375 | Buck or Boost. The mode transition depend on the input source voltage. |
| 1376 | The wide output range is from 2025mV to 5200mV and can be used on most |
| 1377 | common application scenario. |
| 1378 | |
| 1379 | config REGULATOR_RT6190 |
| 1380 | tristate "Richtek RT6190 4-Switch BuckBoost controller" |
| 1381 | depends on I2C |
| 1382 | select REGMAP_I2C |
| 1383 | help |
| 1384 | The RT6190 is a 4-Switch BuckBoost controller designed for converting |
| 1385 | input voltage to output voltage that can be equal to, higher or lower |
| 1386 | than input voltage. It operates with wide input voltage range from |
| 1387 | 4.5V to 36V, and the output voltage can be set from 3V to 36V by |
| 1388 | external FB pin. |
| 1389 | |
| 1390 | config REGULATOR_RT6245 |
| 1391 | tristate "Richtek RT6245 voltage regulator" |
| 1392 | depends on I2C |
| 1393 | select REGMAP_I2C |
| 1394 | help |
| 1395 | This adds support for Richtek RT6245 voltage regulator. |
| 1396 | It can support up to 14A output current and adjustable output voltage |
| 1397 | from 0.4375V to 1.3875V, per step 12.5mV. |
| 1398 | |
| 1399 | config REGULATOR_RT8092 |
| 1400 | tristate "Richtek RT8092 voltage regulator" |
| 1401 | depends on I2C |
| 1402 | select REGMAP_I2C |
| 1403 | help |
| 1404 | The RT8092 is a peak-current mode PWM step-down DC/DC converter with |
| 1405 | I2C control interface. It is capable of delivering 4A continuing |
| 1406 | current over a wide input range from 2.5V to 5.5V. |
| 1407 | |
| 1408 | config REGULATOR_RTQ2134 |
| 1409 | tristate "Richtek RTQ2134 SubPMIC Regulator" |
| 1410 | depends on I2C |
| 1411 | select REGMAP_I2C |
| 1412 | help |
| 1413 | This driver adds support for RTQ2134 SubPMIC regulators. |
| 1414 | The RTQ2134 is a multi-phase, programmable power management IC that |
| 1415 | integrate with four high efficient, synchronous step-down converter |
| 1416 | cores. It features wide output voltage range and the capability to |
| 1417 | configure the corresponding power stages. |
| 1418 | |
| 1419 | config REGULATOR_RTMV20 |
| 1420 | tristate "Richtek RTMV20 Laser Diode Regulator" |
| 1421 | depends on I2C |
| 1422 | select REGMAP_I2C |
| 1423 | help |
| 1424 | This driver adds support for the load switch current regulator on |
| 1425 | the Richtek RTMV20. It can support the load current up to 6A and |
| 1426 | integrate strobe/vsync/fsin signal to synchronize the IR camera. |
| 1427 | |
| 1428 | config REGULATOR_RTQ6752 |
| 1429 | tristate "Richtek RTQ6752 TFT LCD voltage regulator" |
| 1430 | depends on I2C |
| 1431 | select REGMAP_I2C |
| 1432 | help |
| 1433 | This driver adds support for Richtek RTQ6752. RTQ6752 includes two |
| 1434 | synchronous boost converters for PAVDD, and one synchronous NAVDD |
| 1435 | buck-boost. This device is suitable for automotive TFT-LCD panel. |
| 1436 | |
| 1437 | config REGULATOR_RTQ2208 |
| 1438 | tristate "Richtek RTQ2208 SubPMIC Regulator" |
| 1439 | depends on I2C |
| 1440 | select REGMAP_I2C |
| 1441 | help |
| 1442 | This driver adds support for RTQ2208 SubPMIC regulators. |
| 1443 | The RTQ2208 is a multi-phase, programmable power management IC that |
| 1444 | integrate with dual multi-configurable, synchronous buck converters |
| 1445 | and two ldos. It features wide output voltage range from 0.4V to 2.05V |
| 1446 | and the capability to configure the corresponding power stages. |
| 1447 | |
| 1448 | config REGULATOR_S2DOS05 |
| 1449 | tristate "Samsung S2DOS05 voltage regulator" |
| 1450 | depends on MFD_SEC_CORE || COMPILE_TEST |
| 1451 | help |
| 1452 | This driver provides support for the voltage regulators of the S2DOS05. |
| 1453 | The S2DOS05 is a companion power management IC for the smart phones. |
| 1454 | The S2DOS05 has 4 LDOs and 1 BUCK outputs. |
| 1455 | |
| 1456 | config REGULATOR_S2MPA01 |
| 1457 | tristate "Samsung S2MPA01 voltage regulator" |
| 1458 | depends on MFD_SEC_CORE || COMPILE_TEST |
| 1459 | help |
| 1460 | This driver controls Samsung S2MPA01 voltage output regulator |
| 1461 | via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. |
| 1462 | |
| 1463 | config REGULATOR_S2MPS11 |
| 1464 | tristate "Samsung S2MPS11/13/14/15/S2MPU02/05 voltage regulator" |
| 1465 | depends on MFD_SEC_CORE || COMPILE_TEST |
| 1466 | help |
| 1467 | This driver supports a Samsung S2MPS11/13/14/15/S2MPU02/05 voltage |
| 1468 | output regulator via I2C bus. The chip is comprised of high efficient |
| 1469 | Buck converters including Dual-Phase Buck converter, Buck-Boost |
| 1470 | converter, various LDOs. |
| 1471 | |
| 1472 | config REGULATOR_S5M8767 |
| 1473 | tristate "Samsung S5M8767A voltage regulator" |
| 1474 | depends on MFD_SEC_CORE || COMPILE_TEST |
| 1475 | help |
| 1476 | This driver supports a Samsung S5M8767A voltage output regulator |
| 1477 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and |
| 1478 | supports DVS mode with 8bits of output voltage control. |
| 1479 | |
| 1480 | config REGULATOR_SC2730 |
| 1481 | tristate "Spreadtrum SC2730 power regulator driver" |
| 1482 | depends on MFD_SC27XX_PMIC || COMPILE_TEST |
| 1483 | help |
| 1484 | This driver provides support for the voltage regulators on the |
| 1485 | SC2730 PMIC. |
| 1486 | |
| 1487 | config REGULATOR_SC2731 |
| 1488 | tristate "Spreadtrum SC2731 power regulator driver" |
| 1489 | depends on MFD_SC27XX_PMIC || COMPILE_TEST |
| 1490 | help |
| 1491 | This driver provides support for the voltage regulators on the |
| 1492 | SC2731 PMIC. |
| 1493 | |
| 1494 | config REGULATOR_SGM3804 |
| 1495 | tristate "SGMicro SGM3804 voltage regulator" |
| 1496 | depends on I2C && OF |
| 1497 | depends on GPIOLIB |
| 1498 | select REGMAP_I2C |
| 1499 | help |
| 1500 | This driver supports SGMicro SGM3804 dual-output voltage regulator. |
| 1501 | |
| 1502 | config REGULATOR_SKY81452 |
| 1503 | tristate "Skyworks Solutions SKY81452 voltage regulator" |
| 1504 | depends on MFD_SKY81452 |
| 1505 | help |
| 1506 | This driver supports Skyworks SKY81452 voltage output regulator |
| 1507 | via I2C bus. SKY81452 has one voltage linear regulator can be |
| 1508 | programmed from 4.5V to 20V. |
| 1509 | |
| 1510 | This driver can also be built as a module. If so, the module |
| 1511 | will be called sky81452-regulator. |
| 1512 | |
| 1513 | config REGULATOR_SLG51000 |
| 1514 | tristate "Dialog Semiconductor SLG51000 regulators" |
| 1515 | depends on I2C |
| 1516 | select REGMAP_I2C |
| 1517 | help |
| 1518 | Say y here to support for the Dialog Semiconductor SLG51000. |
| 1519 | The SLG51000 is seven compact and customizable low dropout |
| 1520 | regulators. |
| 1521 | |
| 1522 | config REGULATOR_SPACEMIT_P1 |
| 1523 | tristate "SpacemiT P1 regulators" |
| 1524 | depends on ARCH_SPACEMIT || COMPILE_TEST |
| 1525 | depends on I2C |
| 1526 | select MFD_SPACEMIT_P1 |
| 1527 | default ARCH_SPACEMIT |
| 1528 | help |
| 1529 | Enable support for regulators implemented by the SpacemiT P1 |
| 1530 | power controller. The P1 implements 6 high-efficiency buck |
| 1531 | converters and 12 programmable LDO regulators. To compile this |
| 1532 | driver as a module, choose M here. The module will be called |
| 1533 | "spacemit-pmic". |
| 1534 | |
| 1535 | config REGULATOR_STM32_BOOSTER |
| 1536 | tristate "STMicroelectronics STM32 BOOSTER" |
| 1537 | depends on ARCH_STM32 || COMPILE_TEST |
| 1538 | help |
| 1539 | This driver supports internal booster (3V3) embedded in some |
| 1540 | STMicroelectronics STM32 chips. It can be used to supply ADC analog |
| 1541 | input switches when vdda supply is below 2.7V. |
| 1542 | |
| 1543 | This driver can also be built as a module. If so, the module |
| 1544 | will be called stm32-booster. |
| 1545 | |
| 1546 | config REGULATOR_STM32_VREFBUF |
| 1547 | tristate "STMicroelectronics STM32 VREFBUF" |
| 1548 | depends on ARCH_STM32 || COMPILE_TEST |
| 1549 | help |
| 1550 | This driver supports STMicroelectronics STM32 VREFBUF (voltage |
| 1551 | reference buffer) which can be used as voltage reference for |
| 1552 | internal ADCs, DACs and also for external components through |
| 1553 | dedicated Vref+ pin. |
| 1554 | |
| 1555 | This driver can also be built as a module. If so, the module |
| 1556 | will be called stm32-vrefbuf. |
| 1557 | |
| 1558 | config REGULATOR_STM32_PWR |
| 1559 | bool "STMicroelectronics STM32 PWR" |
| 1560 | depends on ARCH_STM32 || COMPILE_TEST |
| 1561 | help |
| 1562 | This driver supports internal regulators (1V1, 1V8, 3V3) in the |
| 1563 | STMicroelectronics STM32 chips. |
| 1564 | |
| 1565 | config REGULATOR_STPMIC1 |
| 1566 | tristate "STMicroelectronics STPMIC1 PMIC Regulators" |
| 1567 | depends on MFD_STPMIC1 |
| 1568 | help |
| 1569 | This driver supports STMicroelectronics STPMIC1 PMIC voltage |
| 1570 | regulators and switches. The STPMIC1 regulators supply power to |
| 1571 | an application processor as well as to external system |
| 1572 | peripherals such as DDR, Flash memories and system devices. |
| 1573 | |
| 1574 | To compile this driver as a module, choose M here: the |
| 1575 | module will be called stpmic1_regulator. |
| 1576 | |
| 1577 | config REGULATOR_TI_ABB |
| 1578 | tristate "TI Adaptive Body Bias on-chip LDO" |
| 1579 | depends on ARCH_OMAP || COMPILE_TEST |
| 1580 | help |
| 1581 | Select this option to support Texas Instruments' on-chip Adaptive Body |
| 1582 | Bias (ABB) LDO regulators. It is recommended that this option be |
| 1583 | enabled on required TI SoC. Certain Operating Performance Points |
| 1584 | on TI SoCs may be unstable without enabling this as it provides |
| 1585 | device specific optimized bias to allow/optimize functionality. |
| 1586 | |
| 1587 | config REGULATOR_STW481X_VMMC |
| 1588 | bool "ST Microelectronics STW481X VMMC regulator" |
| 1589 | depends on MFD_STW481X || COMPILE_TEST |
| 1590 | default y if MFD_STW481X |
| 1591 | help |
| 1592 | This driver supports the internal VMMC regulator in the STw481x |
| 1593 | PMIC chips. |
| 1594 | |
| 1595 | config REGULATOR_SUN20I |
| 1596 | tristate "Allwinner D1 internal LDOs" |
| 1597 | depends on ARCH_SUNXI || COMPILE_TEST |
| 1598 | select MFD_SYSCON |
| 1599 | default ARCH_SUNXI |
| 1600 | help |
| 1601 | This driver supports the internal LDOs in the Allwinner D1 SoC. |
| 1602 | |
| 1603 | config REGULATOR_SY7636A |
| 1604 | tristate "Silergy SY7636A voltage regulator" |
| 1605 | depends on MFD_SY7636A |
| 1606 | help |
| 1607 | This driver supports Silergy SY3686A voltage regulator. |
| 1608 | |
| 1609 | config REGULATOR_SY8106A |
| 1610 | tristate "Silergy SY8106A regulator" |
| 1611 | depends on I2C && OF |
| 1612 | select REGMAP_I2C |
| 1613 | help |
| 1614 | This driver supports SY8106A single output regulator. |
| 1615 | |
| 1616 | config REGULATOR_SY8824X |
| 1617 | tristate "Silergy SY8824C/SY8824E regulator" |
| 1618 | depends on I2C && OF |
| 1619 | select REGMAP_I2C |
| 1620 | help |
| 1621 | This driver supports SY8824C single output regulator. |
| 1622 | |
| 1623 | config REGULATOR_SY8827N |
| 1624 | tristate "Silergy SY8827N regulator" |
| 1625 | depends on I2C && OF |
| 1626 | select REGMAP_I2C |
| 1627 | help |
| 1628 | This driver supports SY8827N single output regulator. |
| 1629 | |
| 1630 | config REGULATOR_TPS51632 |
| 1631 | tristate "TI TPS51632 Power Regulator" |
| 1632 | depends on I2C |
| 1633 | select REGMAP_I2C |
| 1634 | help |
| 1635 | This driver supports TPS51632 voltage regulator chip. |
| 1636 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
| 1637 | with Serial VID control and DVFS. |
| 1638 | The voltage output can be configure through I2C interface or PWM |
| 1639 | interface. |
| 1640 | |
| 1641 | config REGULATOR_TPS6105X |
| 1642 | tristate "TI TPS6105X Power regulators" |
| 1643 | depends on TPS6105X |
| 1644 | default y if TPS6105X |
| 1645 | help |
| 1646 | This driver supports TPS61050/TPS61052 voltage regulator chips. |
| 1647 | It is a single boost converter primarily for white LEDs and |
| 1648 | audio amplifiers. |
| 1649 | |
| 1650 | config REGULATOR_TPS62360 |
| 1651 | tristate "TI TPS6236x Power Regulator" |
| 1652 | depends on I2C |
| 1653 | select REGMAP_I2C |
| 1654 | help |
| 1655 | This driver supports TPS6236x voltage regulator chip. This |
| 1656 | regulator is meant for processor core supply. This chip is |
| 1657 | high-frequency synchronous step down dc-dc converter optimized |
| 1658 | for battery-powered portable applications. |
| 1659 | |
| 1660 | config REGULATOR_TPS6286X |
| 1661 | tristate "TI TPS6286x Power Regulator" |
| 1662 | depends on I2C && OF |
| 1663 | select REGMAP_I2C |
| 1664 | help |
| 1665 | This driver supports TPS6236x voltage regulator chips. These are |
| 1666 | high-frequency synchronous step-down converters with an I2C |
| 1667 | interface. |
| 1668 | |
| 1669 | config REGULATOR_TPS6287X |
| 1670 | tristate "TI TPS6287x Power Regulator" |
| 1671 | depends on I2C && OF |
| 1672 | select REGMAP_I2C |
| 1673 | help |
| 1674 | This driver supports TPS6287x voltage regulator chips. These are |
| 1675 | pin-to-pin high-frequency synchronous step-down dc-dc converters |
| 1676 | with an I2C interface. |
| 1677 | |
| 1678 | If built as a module it will be called tps6287x-regulator. |
| 1679 | |
| 1680 | config REGULATOR_TPS65023 |
| 1681 | tristate "TI TPS65023 Power regulators" |
| 1682 | depends on I2C |
| 1683 | select REGMAP_I2C |
| 1684 | help |
| 1685 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides |
| 1686 | three step-down converters and two general-purpose LDO voltage regulators. |
| 1687 | It supports TI's software based Class-2 SmartReflex implementation. |
| 1688 | |
| 1689 | config REGULATOR_TPS6507X |
| 1690 | tristate "TI TPS6507X Power regulators" |
| 1691 | depends on I2C |
| 1692 | help |
| 1693 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides |
| 1694 | three step-down converters and two general-purpose LDO voltage regulators. |
| 1695 | It supports TI's software based Class-2 SmartReflex implementation. |
| 1696 | |
| 1697 | config REGULATOR_TPS65086 |
| 1698 | tristate "TI TPS65086 Power regulators" |
| 1699 | depends on MFD_TPS65086 |
| 1700 | help |
| 1701 | This driver provides support for the voltage regulators on |
| 1702 | TI TPS65086 PMICs. |
| 1703 | |
| 1704 | config REGULATOR_TPS65090 |
| 1705 | tristate "TI TPS65090 Power regulator" |
| 1706 | depends on MFD_TPS65090 |
| 1707 | help |
| 1708 | This driver provides support for the voltage regulators on the |
| 1709 | TI TPS65090 PMIC. |
| 1710 | |
| 1711 | config REGULATOR_TPS65132 |
| 1712 | tristate "TI TPS65132 Dual Output Power regulators" |
| 1713 | depends on I2C && GPIOLIB |
| 1714 | select REGMAP_I2C |
| 1715 | help |
| 1716 | This driver supports TPS65132 single inductor - dual output |
| 1717 | power supply specifically designed for display panels. |
| 1718 | |
| 1719 | config REGULATOR_TPS65185 |
| 1720 | tristate "TI TPS65185 EPD regulator" |
| 1721 | depends on I2C |
| 1722 | select REGMAP_I2C |
| 1723 | help |
| 1724 | This driver supports the TPS65185 voltage regulator chip |
| 1725 | which is used to provide power to Electronic Paper Displays |
| 1726 | so it is found in E-Book readers. |
| 1727 | If HWWON is enabled, it also provides temperature measurement. |
| 1728 | |
| 1729 | |
| 1730 | config REGULATOR_TPS65217 |
| 1731 | tristate "TI TPS65217 Power regulators" |
| 1732 | depends on MFD_TPS65217 |
| 1733 | help |
| 1734 | This driver supports TPS65217 voltage regulator chips. TPS65217 |
| 1735 | provides three step-down converters and four general-purpose LDO |
| 1736 | voltage regulators. It supports software based voltage control |
| 1737 | for different voltage domains |
| 1738 | |
| 1739 | config REGULATOR_TPS65218 |
| 1740 | tristate "TI TPS65218 Power regulators" |
| 1741 | depends on MFD_TPS65218 && OF |
| 1742 | help |
| 1743 | This driver supports TPS65218 voltage regulator chips. TPS65218 |
| 1744 | provides six step-down converters and one general-purpose LDO |
| 1745 | voltage regulators. It supports software based voltage control |
| 1746 | for different voltage domains |
| 1747 | |
| 1748 | config REGULATOR_TPS65219 |
| 1749 | tristate "TI TPS65219 Power regulators" |
| 1750 | depends on MFD_TPS65219 && OF |
| 1751 | help |
| 1752 | This driver supports TPS65219, TPS65215, and TPS65214 voltage |
| 1753 | regulator chips. |
| 1754 | TPS65219 series of PMICs have 3 single phase BUCKs & 4 LDOs |
| 1755 | voltage regulators. |
| 1756 | TPS65215 PMIC has 3 single phase BUCKs & 2 LDOs. |
| 1757 | TPS65214 PMIC has 3 synchronous stepdown DC-DC converters & 2 |
| 1758 | LDOs. One LDO supports a maximum output current of 300 mA and the |
| 1759 | other a maximum of 500 mA |
| 1760 | All 3 PMICs support software based voltage control for different |
| 1761 | voltage domains. |
| 1762 | |
| 1763 | config REGULATOR_TPS6594 |
| 1764 | tristate "TI TPS6594 Power regulators" |
| 1765 | depends on MFD_TPS6594 && OF |
| 1766 | default MFD_TPS6594 |
| 1767 | help |
| 1768 | This driver supports TPS6594 series and TPS65224 voltage regulator chips. |
| 1769 | TPS6594 series of PMICs have 5 BUCKs and 4 LDOs |
| 1770 | voltage regulators. |
| 1771 | BUCKs 1,2,3,4 can be used in single phase or multiphase mode. |
| 1772 | Part number defines which single or multiphase mode is i used. |
| 1773 | It supports software based voltage control |
| 1774 | for different voltage domains. |
| 1775 | TPS65224 PMIC has 4 BUCKs and 3 LDOs. BUCK12 can be used in dual phase. |
| 1776 | All BUCKs and LDOs volatge can be controlled through software. |
| 1777 | |
| 1778 | config REGULATOR_TPS6524X |
| 1779 | tristate "TI TPS6524X Power regulators" |
| 1780 | depends on SPI |
| 1781 | help |
| 1782 | This driver supports TPS6524X voltage regulator chips. TPS6524X |
| 1783 | provides three step-down converters and two general-purpose LDO |
| 1784 | voltage regulators. This device is interfaced using a customized |
| 1785 | serial interface currently supported on the sequencer serial |
| 1786 | port controller. |
| 1787 | |
| 1788 | config REGULATOR_TPS6586X |
| 1789 | tristate "TI TPS6586X Power regulators" |
| 1790 | depends on MFD_TPS6586X |
| 1791 | help |
| 1792 | This driver supports TPS6586X voltage regulator chips. |
| 1793 | |
| 1794 | config REGULATOR_TPS65910 |
| 1795 | tristate "TI TPS65910/TPS65911 Power Regulators" |
| 1796 | depends on MFD_TPS65910 |
| 1797 | help |
| 1798 | This driver supports TPS65910/TPS65911 voltage regulator chips. |
| 1799 | |
| 1800 | config REGULATOR_TPS65912 |
| 1801 | tristate "TI TPS65912 Power regulator" |
| 1802 | depends on MFD_TPS65912 |
| 1803 | help |
| 1804 | This driver supports TPS65912 voltage regulator chip. |
| 1805 | |
| 1806 | config REGULATOR_TPS68470 |
| 1807 | tristate "TI TPS68470 PMIC Regulators Driver" |
| 1808 | depends on INTEL_SKL_INT3472 || COMPILE_TEST |
| 1809 | help |
| 1810 | This driver adds support for the TPS68470 PMIC to register |
| 1811 | regulators against the usual framework. |
| 1812 | |
| 1813 | The module will be called "tps68470-regulator". |
| 1814 | |
| 1815 | config REGULATOR_TWL4030 |
| 1816 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
| 1817 | depends on TWL4030_CORE |
| 1818 | help |
| 1819 | This driver supports the voltage regulators provided by |
| 1820 | this family of companion chips. |
| 1821 | |
| 1822 | config REGULATOR_UNIPHIER |
| 1823 | tristate "UniPhier regulator driver" |
| 1824 | depends on ARCH_UNIPHIER || COMPILE_TEST |
| 1825 | depends on OF |
| 1826 | select REGMAP_MMIO |
| 1827 | default ARCH_UNIPHIER |
| 1828 | help |
| 1829 | Support for regulators implemented on Socionext UniPhier SoCs. |
| 1830 | |
| 1831 | config REGULATOR_RZG2L_VBCTRL |
| 1832 | tristate "Renesas RZ/G2L USB VBUS regulator driver" |
| 1833 | depends on RESET_RZG2L_USBPHY_CTRL || COMPILE_TEST |
| 1834 | depends on OF |
| 1835 | select REGMAP_MMIO |
| 1836 | default RESET_RZG2L_USBPHY_CTRL |
| 1837 | help |
| 1838 | Support for VBUS regulators implemented on Renesas RZ/G2L SoCs. |
| 1839 | |
| 1840 | config REGULATOR_VCTRL |
| 1841 | tristate "Voltage controlled regulators" |
| 1842 | depends on OF |
| 1843 | help |
| 1844 | This driver provides support for voltage regulators whose output |
| 1845 | voltage is controlled by the voltage of another regulator. |
| 1846 | |
| 1847 | config REGULATOR_VEXPRESS |
| 1848 | tristate "Versatile Express regulators" |
| 1849 | depends on VEXPRESS_CONFIG |
| 1850 | help |
| 1851 | This driver provides support for voltage regulators available |
| 1852 | on the ARM Ltd's Versatile Express platform. |
| 1853 | |
| 1854 | config REGULATOR_VQMMC_IPQ4019 |
| 1855 | tristate "IPQ4019 VQMMC SD LDO regulator support" |
| 1856 | depends on ARCH_QCOM |
| 1857 | help |
| 1858 | This driver provides support for the VQMMC LDO I/0 |
| 1859 | voltage regulator of the IPQ4019 SD/EMMC controller. |
| 1860 | |
| 1861 | config REGULATOR_WM831X |
| 1862 | tristate "Wolfson Microelectronics WM831x PMIC regulators" |
| 1863 | depends on MFD_WM831X |
| 1864 | help |
| 1865 | Support the voltage and current regulators of the WM831x series |
| 1866 | of PMIC devices. |
| 1867 | |
| 1868 | config REGULATOR_WM8350 |
| 1869 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" |
| 1870 | depends on MFD_WM8350 |
| 1871 | help |
| 1872 | This driver provides support for the voltage and current regulators |
| 1873 | of the WM8350 AudioPlus PMIC. |
| 1874 | |
| 1875 | config REGULATOR_WM8400 |
| 1876 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" |
| 1877 | depends on MFD_WM8400 |
| 1878 | help |
| 1879 | This driver provides support for the voltage regulators of the |
| 1880 | WM8400 AudioPlus PMIC. |
| 1881 | |
| 1882 | config REGULATOR_WM8994 |
| 1883 | tristate "Wolfson Microelectronics WM8994 CODEC" |
| 1884 | depends on MFD_WM8994 |
| 1885 | help |
| 1886 | This driver provides support for the voltage regulators on the |
| 1887 | WM8994 CODEC. |
| 1888 | |
| 1889 | config REGULATOR_QCOM_LABIBB |
| 1890 | tristate "Qualcomm LAB/IBB regulator support" |
| 1891 | depends on SPMI || COMPILE_TEST |
| 1892 | help |
| 1893 | This driver supports Qualcomm's LAB/IBB regulators present on the |
| 1894 | Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI |
| 1895 | based PMIC implementations. LAB can be used as positive |
| 1896 | boost regulator and IBB can be used as a negative boost regulator |
| 1897 | for LCD display panel. |
| 1898 | |
| 1899 | endif |